diff options
Diffstat (limited to 'drivers/arm/serial/serial.c')
| -rw-r--r-- | drivers/arm/serial/serial.c | 101 |
1 files changed, 101 insertions, 0 deletions
diff --git a/drivers/arm/serial/serial.c b/drivers/arm/serial/serial.c new file mode 100644 index 0000000..8f7f0b1 --- /dev/null +++ b/drivers/arm/serial/serial.c @@ -0,0 +1,101 @@ +#include <serial.h> +#include <io.h> +#include <stdint.h> +#include <asm/arch/secure_apb.h> + +void serial_set_pin_port(unsigned port_base) +{ + setbits_le32(P_AO_RTI_PIN_MUX_REG,3<<11); +} + +#define UART_STP_BIT UART_CNTL_MASK_STP_1BIT +#define UART_PRTY_BIT 0 +#define UART_CHAR_LEN UART_CNTL_MASK_CHAR_8BIT + +void serial_init(unsigned set) +{ + /* baud rate */ + writel(set| UART_STP_BIT + | UART_PRTY_BIT + | UART_CHAR_LEN + //please do not remove these setting , jerry.yu + | UART_CNTL_MASK_TX_EN + | UART_CNTL_MASK_RX_EN + | UART_CNTL_MASK_RST_TX + | UART_CNTL_MASK_RST_RX + | UART_CNTL_MASK_CLR_ERR + ,P_UART_CONTROL(UART_PORT_CONS)); + serial_set_pin_port(UART_PORT_CONS); + clrbits_le32(P_UART_CONTROL(UART_PORT_CONS), + UART_CNTL_MASK_RST_TX | UART_CNTL_MASK_RST_RX | UART_CNTL_MASK_CLR_ERR); +} + +int serial_putc(int c) +{ + if (c == '\n') { + while ((readl(P_UART_STATUS(UART_PORT_CONS)) & UART_STAT_MASK_TFIFO_FULL)); + writel('\r', P_UART_WFIFO(UART_PORT_CONS)); + } + /* Wait till dataTx register is not full */ + while ((readl(P_UART_STATUS(UART_PORT_CONS)) & UART_STAT_MASK_TFIFO_FULL)); + writel(c, P_UART_WFIFO(UART_PORT_CONS)); + /* Wait till dataTx register is empty */ + return c; +} + +int serial_getc(void) +{ + unsigned char ch; + /* Wait till character is placed in fifo */ + while ((readl(P_UART_STATUS(UART_PORT_CONS)) & UART_STAT_MASK_RFIFO_CNT) == 0) ; + + /* Also check for overflow errors */ + if (readl(P_UART_STATUS(UART_PORT_CONS)) & (UART_STAT_MASK_PRTY_ERR | UART_STAT_MASK_FRAM_ERR)) + { + setbits_le32(P_UART_CONTROL(UART_PORT_CONS),UART_CNTL_MASK_CLR_ERR); + clrbits_le32(P_UART_CONTROL(UART_PORT_CONS),UART_CNTL_MASK_CLR_ERR); + } + + ch = readl(P_UART_RFIFO(UART_PORT_CONS)) & 0x00ff; + return ((int)ch); +} + +int serial_puts(const char *s){ + while (*s) { + serial_putc(*s++); + } + return 0; +} + +//support 64bit number, serial_put_hex(data, 64); +void serial_put_hex(unsigned long data,unsigned int bitlen) +{ + int i; + for (i=bitlen-4;i>=0;i-=4) { + if ((data>>i) == 0) + { + serial_putc(0x30); + continue; + } + unsigned char s = (data>>i)&0xf; + if (s<10) + serial_putc(0x30+s); + else + serial_putc(0x61+s-10); + } +} + +void serial_put_dec(unsigned long data) +{ + char szTxt[10]; + szTxt[0] = 0x30; + int i = 0; + + do { + szTxt[i++] = (data % 10) + 0x30; + data = data / 10; + } while(data); + + for (--i;i >=0;--i) + serial_putc(szTxt[i]); +}
\ No newline at end of file |