/* * Copyright (c) 2016-2021, Broadcom * * SPDX-License-Identifier: BSD-3-Clause */ #ifndef SR_DEF_H #define SR_DEF_H #ifndef __ASSEMBLER__ #include #endif #include #include #include /* Special value used to verify platform parameters from BL2 to BL3-1 */ #define BRCM_BL31_PLAT_PARAM_VAL ULL(0x0f1e2d3c4b5a6978) #define MHB_BASE_ADDR 0x60000000 #define PLAT_BRCM_CCN_BASE 0x61000000 #define CORESIGHT_BASE_ADDR 0x62000000 #define SMMU_BASE 0x64000000 /* memory map entries*/ /* Grouping block device for bigger MMU region */ /* covers MHB, CNN, coresight, GIC, MMU, APB, CRMU */ #define PERIPH0_BASE MHB_BASE_ADDR #define PERIPH0_SIZE 0x06d00000 #define PERIPH1_BASE 0x66d80000 #define PERIPH1_SIZE 0x00f80000 #define HSLS_BASE_ADDR 0x68900000 #define HSLS_SIZE 0x04500000 #define GIC500_BASE 0x63c00000 #define GIC500_SIZE 0x400000 /******************************************************************************* * CCN related constants ******************************************************************************/ #define OLY_MN_REGISTERS_NODE0_SECURE_ACCESS (PLAT_BRCM_CCN_BASE + 0x0) #define OLY_RNI3PDVM_REGISTERS_NODE8_AUX_CTL (PLAT_BRCM_CCN_BASE + 0x880500) /* Used for acceleration of coherent ordered writes */ #define OLY_RNI3PDVM_REGISTERS_NODE8_AUX_CTL_WUO BIT(4) /* Wait for completion of requests at RN-I */ #define OLY_RNI3PDVM_REGISTERS_NODE8_AUX_CTL_WFC BIT(3) /* * Forces all reads from the RN-I to be sent with the request order bit set * and this ensures ordered allocation of read data buffers in the RN-I */ #define OLY_RNI3PDVM_REGISTERS_NODE8_AUX_CTL_RQO BIT(5) #define OLY_RNI3PDVM_REGISTERS_NODE14_AUX_CTL (PLAT_BRCM_CCN_BASE + 0x8e0500) /* Wait for completion of requests at RN-I */ #define OLY_RNI3PDVM_REGISTERS_NODE14_AUX_CTL_WFC BIT(3) #define OLY_HNI_REGISTERS_NODE0_POS_CONTROL (PLAT_BRCM_CCN_BASE + 0x80000) #define POS_CONTROL_HNI_POS_EN BIT(0) #define OLY_HNI_REGISTERS_NODE0_PCIERC_RNI_NODEID_LIST \ (PLAT_BRCM_CCN_BASE + 0x80008) /* PAXB and PAXC connected to 8th Node */ #define SR_RNI_PCIE_CONNECTED BIT(8) /* PAXB connected to 6th Node */ #define SRP_RNI_PCIE_CONNECTED BIT(6) #define OLY_HNI_REGISTERS_NODE0_SA_AUX_CTL (PLAT_BRCM_CCN_BASE + 0x80500) #define SA_AUX_CTL_POS_EARLY_WR_COMP_EN BIT(5) #define SA_AUX_CTL_SER_DEVNE_WR BIT(9) /******************************************************************************* * Coresight related constants ******************************************************************************/ #define CORESIGHT_BASE_ADDR 0x62000000 #define IHOST0_BASE 0x66000000 #define IHOST_ADDR_SPACE 0x2000 /******************************************************************************* * SCR related constants ******************************************************************************/ #define SCR_BASE 0x6600a000 #define SCR_ARCACHE_OFFSET 4 #define SCR_ARCACHE_MASK (0x3 << SCR_ARCACHE_OFFSET) #define SCR_AWCACHE_OFFSET 6 #define SCR_AWCACHE_MASK (0x3 << SCR_AWCACHE_OFFSET) #define SCR_AXCACHE_CONFIG_MASK (SCR_ARCACHE_MASK | SCR_AWCACHE_MASK) #define SCR_TBUX_AXCACHE_CONFIG ((0x1 << SCR_AWCACHE_OFFSET) | \ (0x1 << SCR_ARCACHE_OFFSET)) #define SCR_REGS_SCR_SOFT_RESET (SCR_BASE + 0x1c) #define SCR_REGS_GIC_SOFT_RESET BIT(0) #define SCR_GPV_BASE 0x66100000 #define SCR_NOC_SECURITY0 (SCR_GPV_BASE + 0x08) #define SCR_NOC_DDR_REGISTER_ACCESS (SCR_GPV_BASE + 0x30) /******************************************************************************* * MEMC and DDR related constants ******************************************************************************/ #define DDR0_CONTROL_ROOT 0x66200000 #define EMEM_SS_CFG_0_ROOT 0x66202000 #define EMEM_SYS_IF_0_ROOT 0x66204000 #define DDR_PHY0_ROOT 0x66240000 #define DDR1_CONTROL_ROOT 0x66280000 #define EMEM_SS_CFG_1_ROOT 0x66282000 #define EMEM_SYS_IF_1_ROOT 0x66284000 #define DDR_PHY1_ROOT 0x662c0000 #define DDR2_CONTROL_ROOT 0x66300000 #define EMEM_SS_CFG_2_ROOT 0x66302000 #define EMEM_SYS_IF_2_ROOT 0x66304000 #define DDR_PHY2_ROOT 0x66340000 /******************************************************************************* * TZC400 related constants ******************************************************************************/ #define TZC_400_BASE 0x66d84000 /******************************************************************************* * FS4 related constants ******************************************************************************/ #define FS4_SRAM_IDM_IO_CONTROL_DIRECT 0x66d8a408 #define FS4_CRYPTO_IDM_IO_CONTROL_DIRECT 0x66d8e408 #define FS4_CRYPTO_IDM_RESET_CONTROL 0x66d8e800 #define FS4_CRYPTO_BASE 0x67000000 #define FS4_CRYPTO_DME_BASE (FS4_CRYPTO_BASE + 0x280000) #define FS4_RAID_IDM_IO_CONTROL_DIRECT 0x66d8f408 #define FS4_RAID_IDM_IO_STATUS 0x66d8f500 #define FS4_RAID_IDM_RESET_CONTROL 0x66d8f800 #define FS4_RAID_BASE 0x67400000 #define FS4_RAID_DME_BASE (FS4_RAID_BASE + 0x280000) #define FS4_CRYPTO_GPV_BASE 0x67300000 #define FS4_RAID_GPV_BASE 0x67700000 #define FS6_PKI_BASE 0x67400000 #define FS6_PKI_DME_BASE 0x66D90000 #define TZC400_FS_SRAM_ROOT 0x66d84000 #define GATE_KEEPER_OFFSET 0x8 #define REGION_ATTRIBUTES_0_OFFSET 0x110 #define REGION_ID_ACCESS_0_OFFSET 0x114 #define NIC400_FS_NOC_ROOT 0x66e00000 #define NIC400_FS_NOC_SECURITY2_OFFSET 0x10 #define NIC400_FS_NOC_SECURITY4_OFFSET 0x18 #define NIC400_FS_NOC_SECURITY7_OFFSET 0x24 /******************************************************************************* * SATA PHY related constants ******************************************************************************/ #define SATA_BASE 0x67d00000 /******************************************************************************* * USB related constants ******************************************************************************/ #define USB_BASE 0x68500000 #define USB_SIZE 0x00400000 #define XHC_BASE (USB_BASE + 0x11000) #define MAX_USB_PORTS 3 /******************************************************************************* * HSLS related constants ******************************************************************************/ #define IPROC_ROOT 0x68900000 #define HSLS_ICFG_REGS_BASE IPROC_ROOT #define HSLS_IDM_REGS_BASE 0x68e00000 #define HSLS_MODE_SEL_CONTROL 0x68a40000 #define HSLS_TZPC_BASE 0x68b40000 #define HSLS_GPV_BASE 0x6cd00000 /******************************************************************************* * Chip ID related constants ******************************************************************************/ #define ICFG_CHIP_ID HSLS_ICFG_REGS_BASE #define CHIP_ID_SR 0xd730 #define CHIP_ID_NS3Z 0xe56d #define CHIP_ID_MASK 0xf000 #define ICFG_CHIP_REVISION_ID (HSLS_ICFG_REGS_BASE + 0x4) #define PLAT_CHIP_ID_GET (mmio_read_32(ICFG_CHIP_ID)) #define PLAT_CHIP_REV_GET (mmio_read_32(ICFG_CHIP_REVISION_ID)) /******************************************************************************* * CMIC MII (MDIO) related constant ******************************************************************************/ #define PLAT_CMIC_MIIM_BASE 0x68920000U /******************************************************************************* * Timers related constants ******************************************************************************/ /* ChipcommonG_tim0_TIM_TIMER1Load 0x68930000 */ #define SP804_TIMER0_BASE 0x68930000 #define SP804_TIMER1_BASE 0x68940000 #define SP804_TIMER0_TIMER_VAL_REG_OFFSET 0x4 #define SP804_TIMER0_CLKMULT 2 #define SP804_TIMER0_CLKDIV 25 /******************************************************************************* * GPIO related constants ******************************************************************************/ #define IPROC_GPIO_NS_BASE 0x689d0000 #define IPROC_GPIO_S_BASE 0x68b00000 #define IPROC_GPIO_NR 151 #define GPIO_S_CNTRL_REG 0x68b60000 /******************************************************************************* * I2C SMBUS related constants ******************************************************************************/ #define SMBUS0_REGS_BASE 0x689b0000 #define SMBUS1_REGS_BASE 0x689e0000 /******************************************************************************* * UART related constants ******************************************************************************/ #define ChipcommonG_UART0_UART_RBR_THR_DLL 0x68a00000 #define ChipcommonG_UART1_UART_RBR_THR_DLL 0x68a10000 #define ChipcommonG_UART2_UART_RBR_THR_DLL 0x68a20000 #define ChipcommonG_UART3_UART_RBR_THR_DLL 0x68a30000 #define UART0_BASE_ADDR ChipcommonG_UART0_UART_RBR_THR_DLL #define UART1_BASE_ADDR ChipcommonG_UART1_UART_RBR_THR_DLL #define UART2_BASE_ADDR ChipcommonG_UART2_UART_RBR_THR_DLL #define UART3_BASE_ADDR ChipcommonG_UART3_UART_RBR_THR_DLL #define UART_SPR_OFFSET 0x1c /* Scratch Pad Register */ #define LOG_LEVEL_REGISTER CRMU_SPARE_REG_3 #define GET_LOG_LEVEL() (mmio_read_32(LOG_LEVEL_REGISTER)) #define SET_LOG_LEVEL(x) (mmio_write_32(LOG_LEVEL_REGISTER, x)) #define IO_RETRY_REGISTER CRMU_SPARE_REG_4 #define DWC_UART_REFCLK (25 * 1000 * 1000) #define DWC_UART_REFCLK_DIV 16 /* Baud rate in emulation will vary based on setting of 25MHz SCLK */ #define DWC_UART_BAUDRATE 115200 #define BRCM_CRASH_CONSOLE_BASE UART1_BASE_ADDR #define BRCM_CRASH_CONSOLE_REFCLK DWC_UART_REFCLK #define BRCM_CRASH_CONSOLE_BAUDRATE DWC_UART_BAUDRATE #ifdef BOARD_CONSOLE_UART #define PLAT_BRCM_BOOT_UART_BASE BOARD_CONSOLE_UART #else #define PLAT_BRCM_BOOT_UART_BASE UART1_BASE_ADDR #endif #define CONSOLE_UART_ID ((PLAT_BRCM_BOOT_UART_BASE >> 16) & 0x3) #define PLAT_BRCM_BOOT_UART_CLK_IN_HZ DWC_UART_REFCLK #define BRCM_CONSOLE_BAUDRATE DWC_UART_BAUDRATE #define PLAT_BRCM_BL31_RUN_UART_BASE PLAT_BRCM_BOOT_UART_BASE #define PLAT_BRCM_BL31_RUN_UART_CLK_IN_HZ PLAT_BRCM_BOOT_UART_CLK_IN_HZ /******************************************************************************* * IOMUX related constants ******************************************************************************/ #define HSLS_IOPAD_BASE HSLS_MODE_SEL_CONTROL #define MODE_SEL_CONTROL_FSEL_MASK 0x7 #define MODE_SEL_CONTROL_FSEL_MODE0 0x0 #define MODE_SEL_CONTROL_FSEL_MODE1 0x1 #define MODE_SEL_CONTROL_FSEL_MODE2 0x2 #define MODE_SEL_CONTROL_FSEL_MODE3 0x3 #define MODE_SEL_CONTROL_FSEL_DEBUG 0x4 #define IPROC_IOPAD_MODE_BASE (HSLS_MODE_SEL_CONTROL + 0x29c) #define UART0_SIN_MODE_SEL_CONTROL (HSLS_MODE_SEL_CONTROL + 0x4a8) #define UART0_SOUT_MODE_SEL_CONTROL (HSLS_MODE_SEL_CONTROL + 0x4ac) #define UART1_SIN_MODE_SEL_CONTROL (HSLS_MODE_SEL_CONTROL + 0x3b8) #define UART1_SOUT_MODE_SEL_CONTROL (HSLS_MODE_SEL_CONTROL + 0x3bc) #define UARTx_SIN_MODE_SEL_CONTROL_FSEL 0 #define UARTx_SOUT_MODE_SEL_CONTROL_FSEL 0 /******************************************************************************* * PKA constants ******************************************************************************/ #define ICFG_PKA_MEM_PWR_CTRL (HSLS_ICFG_REGS_BASE + 0xac0) #define ICFG_PKA_MEM_PWR_CTRL__POWERONIN BIT(0) #define ICFG_PKA_MEM_PWR_CTRL__POWEROKIN BIT(1) #define ICFG_PKA_MEM_PWR_CTRL__ARRPOWERONIN BIT(2) #define ICFG_PKA_MEM_PWR_CTRL__ARRPOWEROKIN BIT(3) #define ICFG_PKA_MEM_PWR_CTRL__POWERONOUT BIT(4) #define ICFG_PKA_MEM_PWR_CTRL__POWEROKOUT BIT(5) #define ICFG_PKA_MEM_PWR_CTRL__ARRPOWERONOUT BIT(6) #define ICFG_PKA_MEM_PWR_CTRL__ARRPOWEROKOUT BIT(7) #define ICFG_PKA_MEM_PWR_CTRL__ISO BIT(8) /******************************************************************************* * RNG constants ******************************************************************************/ #define RNG_BASE_ADDR 0x68b20000 /******************************************************************************* * Trusted Watchdog constants ******************************************************************************/ #define ARM_SP805_TWDG_BASE 0x68b30000 #define ARM_SP805_TWDG_CLK_HZ ((25 * 1000 * 1000) / 2) /* * The TBBR document specifies a watchdog timeout of 256 seconds. SP805 * asserts reset after two consecutive countdowns (2 x 128 = 256 sec) */ #define ARM_TWDG_TIMEOUT_SEC 128 #define ARM_TWDG_LOAD_VAL (ARM_SP805_TWDG_CLK_HZ * \ ARM_TWDG_TIMEOUT_SEC) /******************************************************************************* * SOTP related constants ******************************************************************************/ #define SOTP_REGS_OTP_BASE 0x68b50000 #define SOTP_CHIP_CTRL (SOTP_REGS_OTP_BASE + 0x4c) #define SOTP_CLEAR_SYSCTRL_ALL_MASTER_NS 0 /******************************************************************************* * DMAC/PL330 related constants ******************************************************************************/ #define DMAC_M0_IDM_IO_CONTROL_DIRECT (HSLS_IDM_REGS_BASE + 0x408) #define BOOT_MANAGER_NS BIT(25) #define DMAC_M0_IDM_RESET_CONTROL (HSLS_IDM_REGS_BASE + 0x800) #define ICFG_DMAC_CONFIG_0 (HSLS_ICFG_REGS_BASE + 0x190) #define ICFG_DMAC_CONFIG_1 (HSLS_ICFG_REGS_BASE + 0x194) #define ICFG_DMAC_CONFIG_2 (HSLS_ICFG_REGS_BASE + 0x198) #define BOOT_PERIPHERAL_NS 0xffffffff #define ICFG_DMAC_CONFIG_3 (HSLS_ICFG_REGS_BASE + 0x19c) #define BOOT_IRQ_NS 0x0000ffff #define ICFG_DMAC_SID_ARADDR_CONTROL (HSLS_ICFG_REGS_BASE + 0xaf0) #define ICFG_DMAC_SID_AWADDR_CONTROL (HSLS_ICFG_REGS_BASE + 0xaf4) #define ICFG_DMAC_MEM_PWR_CTRL__POWERONIN BIT(0) #define ICFG_DMAC_MEM_PWR_CTRL__POWEROKIN BIT(1) #define ICFG_DMAC_MEM_PWR_CTRL__ARRPOWERONIN BIT(2) #define ICFG_DMAC_MEM_PWR_CTRL__ARRPOWEROKIN BIT(3) #define ICFG_DMAC_MEM_PWR_CTRL__POWERONOUT BIT(4) #define ICFG_DMAC_MEM_PWR_CTRL__POWEROKOUT BIT(5) #define ICFG_DMAC_MEM_PWR_CTRL__ARRPOWERONOUT BIT(6) #define ICFG_DMAC_MEM_PWR_CTRL__ARRPOWEROKOUT BIT(7) #define ICFG_DMAC_MEM_PWR_CTRL__ISO BIT(8) #define ICFG_DMAC_MEM_PWR_CTRL (HSLS_ICFG_REGS_BASE + 0xadc) /******************************************************************************* * PNOR related constants ******************************************************************************/ #define PNOR_ICFG_BASE (HSLS_ICFG_REGS_BASE + 0x780) #define PNOR_ICFG_CS_0 PNOR_ICFG_BASE #define PNOR_ICFG_CS_1 (PNOR_ICFG_BASE + 0x4) #define PNOR_ICFG_CS_2 (PNOR_ICFG_BASE + 0x8) #define PNOR_ICFG_CS_x_MASK0_MASK 0xff #define PNOR_ICFG_CS_x_MASK0_SHIFT 8 #define PNOR_ICFG_CS_x_MATCH0_MASK 0xff #define PNOR_ICFG_CS_x_MATCH0_SHIFT 0 #define PNOR_IDM_BASE (HSLS_IDM_REGS_BASE + 0xb000) #define PNOR_IDM_IO_CONTROL_DIRECT (PNOR_IDM_BASE + 0x408) #define PNOR_IDM_IO_RESET_CONTROL (PNOR_IDM_BASE + 0x800) #define PNOR_REG_BASE 0x68c50000 #define PNOR_REG_DIRECT_CMD (PNOR_REG_BASE + 0x010) #define PNOR_REG_SET_CYCLES (PNOR_REG_BASE + 0x014) #define PNOR_REG_SET_OPMODE (PNOR_REG_BASE + 0x018) #define PNOR_REG_REFRESH_0 (PNOR_REG_BASE + 0x020) #define PNOR_REG_PERIPH_ID0 (PNOR_REG_BASE + 0xfe0) #define PNOR_REG_PERIPH_ID1 (PNOR_REG_BASE + 0xfe4) #define PNOR_REG_PERIPH_ID2 (PNOR_REG_BASE + 0xfe8) #define PNOR_REG_PERIPH_ID3 (PNOR_REG_BASE + 0xfec) #define PNOR_REG_PERIPH_IDx_MASK 0xff /******************************************************************************* * NAND related constants ******************************************************************************/ #define NAND_FLASH_REVISION 0x68c60000 #define NAND_IDM_IDM_IO_CONTROL_DIRECT (HSLS_IDM_REGS_BASE + 0xa408) #define NAND_IDM_IDM_RESET_CONTROL (HSLS_IDM_REGS_BASE + 0xa800) /******************************************************************************* * eMMC related constants ******************************************************************************/ #define PLAT_SD_MAX_READ_LENGTH 0x400 #define SDIO0_EMMCSDXC_SYSADDR 0x68cf1000 #define SDIO_IDM0_IO_CONTROL_DIRECT (HSLS_IDM_REGS_BASE + 0x2408) #define SDIO_IDM1_IO_CONTROL_DIRECT (HSLS_IDM_REGS_BASE + 0x3408) #define SDIO_IDM0_IDM_RESET_CONTROL (HSLS_IDM_REGS_BASE + 0x2800) #define ICFG_SDIO0_BASE (HSLS_ICFG_REGS_BASE + 0x6e4) #define ICFG_SDIO1_BASE (HSLS_ICFG_REGS_BASE + 0x734) #define ICFG_SDIO0_CAP0 (ICFG_SDIO0_BASE + 0x10) #define ICFG_SDIO0_CAP1 (ICFG_SDIO0_BASE + 0x14) #define ICFG_SDIO0_SID (HSLS_ICFG_REGS_BASE + 0xb00) #define ICFG_SDIO1_SID (HSLS_ICFG_REGS_BASE + 0xb08) /******************************************************************************* * Bootstrap related constants ******************************************************************************/ #define ROM_S0_IDM_IO_STATUS (HSLS_IDM_REGS_BASE + 0x9500) /******************************************************************************* * ROM related constants ******************************************************************************/ #define ROM_BASE_ADDR 0x6ce00000 #define ROM_VERSION_STRING_ADDR (ROM_BASE_ADDR + 0x28000) #define ROM_BUILD_MESSAGE_ADDR (ROM_BASE_ADDR + 0x28018) /******************************************************************************* * Boot source peripheral related constants ******************************************************************************/ #define QSPI_CTRL_BASE_ADDR 0x68c70000 #define QSPI_BASE_ADDR 0x70000000 #define QSPI_SIZE 0x08000000 #define NOR_BASE_ADDR 0x74000000 #define NOR_SIZE 0x04000000 #define NAND_BASE_ADDR 0x78000000 #define NAND_SIZE 0x08000000 #define QSPI_IDM_RESET_CONTROL (HSLS_IDM_REGS_BASE + 0xc800) #define APBR_IDM_RESET_CONTROL (HSLS_IDM_REGS_BASE + 0xe800) #define APBS_IDM_IDM_RESET_CONTROL (HSLS_IDM_REGS_BASE + 0xf800) #define APBX_IDM_IDM_IO_CONTROL_DIRECT (HSLS_IDM_REGS_BASE + 0x10408) #define APBX_IDM_IDM_IO_CONTROL_DIRECT_CLK_ENABLE 0 #define APBX_IDM_IDM_IO_CONTROL_DIRECT_WDOG_SCLK_SEL 2 #define APBX_IDM_IDM_IO_CONTROL_DIRECT_TIM0_SCLK_SEL 4 #define APBX_IDM_IDM_IO_CONTROL_DIRECT_TIM1_SCLK_SEL 6 #define APBX_IDM_IDM_IO_CONTROL_DIRECT_TIM2_SCLK_SEL 8 #define APBX_IDM_IDM_IO_CONTROL_DIRECT_TIM3_SCLK_SEL 10 #define APBX_IDM_IDM_IO_CONTROL_DIRECT_TIM4_SCLK_SEL 12 #define APBX_IDM_IDM_IO_CONTROL_DIRECT_TIM5_SCLK_SEL 13 #define APBX_IDM_IDM_IO_CONTROL_DIRECT_TIM6_SCLK_SEL 14 #define APBX_IDM_IDM_IO_CONTROL_DIRECT_TIM7_SCLK_SEL 15 #define APBY_IDM_IDM_IO_CONTROL_DIRECT (HSLS_IDM_REGS_BASE + 0x11408) #define APBY_IDM_IDM_IO_CONTROL_DIRECT_CLK_ENABLE 0 #define APBY_IDM_IDM_IO_CONTROL_DIRECT_UART0_SCLK_SEL 2 #define APBY_IDM_IDM_IO_CONTROL_DIRECT_UART1_SCLK_SEL 4 #define APBY_IDM_IDM_IO_CONTROL_DIRECT_UART2_SCLK_SEL 6 #define APBY_IDM_IDM_IO_CONTROL_DIRECT_UART3_SCLK_SEL 8 #define APBZ_IDM_IDM_IO_CONTROL_DIRECT (HSLS_IDM_REGS_BASE + 0x12408) #define APBZ_IDM_IDM_IO_CONTROL_DIRECT_CLK_ENABLE 0 #define APBZ_IDM_IDM_IO_CONTROL_DIRECT_WDOG_SCLK_SEL 2 /******************************************************************************* * Stingray memory map related constants ******************************************************************************/ /* The last 4KB of Trusted SRAM are used as shared memory */ #define BRCM_SHARED_RAM_SIZE 0x0 #define BRCM_SHARED_RAM_BASE (PLAT_BRCM_TRUSTED_SRAM_BASE + \ PLAT_BRCM_TRUSTED_SRAM_SIZE - \ BRCM_SHARED_RAM_SIZE) /* Reserve 4 KB to store error logs in BL2 */ #define BCM_ELOG_BL2_SIZE 0x00001000 #define BCM_ELOG_BL2_BASE BL1_RW_LIMIT /* The remaining Trusted SRAM is used to load the BL images */ #define BRCM_BL_RAM_BASE (PLAT_BRCM_TRUSTED_SRAM_BASE) #define BRCM_BL_RAM_SIZE (PLAT_BRCM_TRUSTED_SRAM_SIZE - \ BRCM_SHARED_RAM_SIZE) /* DDR Address where TMON temperature values are written */ #define TMON_SHARED_DDR_ADDRESS 0x8f100000 /* Reserve 4 kB to pass data to BL33 */ #define BL33_SHARED_DDR_BASE 0x8f102000 #define BL33_SHARED_DDR_SIZE 0x1000 /* Default AP error logging base addr */ #ifndef ELOG_AP_UART_LOG_BASE #define ELOG_AP_UART_LOG_BASE 0x8f110000 #endif /* Reserve 16 to store error logs in BL31 */ #define BCM_ELOG_BL31_BASE ELOG_AP_UART_LOG_BASE #define BCM_ELOG_BL31_SIZE 0x4000 /******************************************************************************* * Non-secure DDR Map ******************************************************************************/ #define BRCM_DRAM1_BASE ULL(0x80000000) #define BRCM_DRAM1_SIZE ULL(0x10000000) #define BRCM_DRAM2_BASE ULL(0x880000000) #define BRCM_DRAM2_SIZE ULL(0x780000000) #define BRCM_DRAM3_BASE ULL(0x8800000000) #define BRCM_DRAM3_SIZE ULL(0x7800000000) #define BRCM_SHARED_DRAM_BASE BL33_SHARED_DDR_BASE #define BRCM_SHARED_DRAM_SIZE BL33_SHARED_DDR_SIZE #define BRCM_EXT_SRAM_BASE ULL(0x74000000) #define BRCM_EXT_SRAM_SIZE ULL(0x4000000) /* Priority levels for platforms */ #define PLAT_RAS_PRI 0x10 #define PLAT_SDEI_CRITICAL_PRI 0x60 #define PLAT_SDEI_NORMAL_PRI 0x70 /* Define a list of Group 1 Secure and Group 0 interrupts as per GICv3 */ #define BRCM_IRQ_SEC_SGI_0 14 #define BRCM_IRQ_SEC_SGI_1 15 /* RTC periodic interrupt */ #define BRCM_IRQ_SEC_SPI_0 49 /* * Macros for local power states in SR platforms encoded by State-ID field * within the power-state parameter. */ /* Local power state for power domains in Run state. */ #define PLAT_LOCAL_STATE_RUN 0 /* Local power state for retention. Valid only for CPU power domains */ #define PLAT_LOCAL_STATE_RET 1 /* * Local power state for OFF/power-down. Valid for CPU and cluster power * domains. */ #define PLAT_LOCAL_STATE_OFF 2 /* * This macro defines the deepest retention state possible. A higher state * id will represent an invalid or a power down state. */ #define PLAT_MAX_RET_STATE PLAT_LOCAL_STATE_RET /* * This macro defines the deepest power down states possible. Any state ID * higher than this is invalid. */ #define PLAT_MAX_OFF_STATE PLAT_LOCAL_STATE_OFF /* ChiMP-related constants */ #define NITRO_TZPC_TZPCDECPROT0clr 0x60c01808 #define NITRO_TZPC_TZPCDECPROT0clr__DECPROT0_chimp_m_clr_R 1 #define NIC400_NITRO_CHIMP_S_IDM_IO_CONTROL_DIRECT 0x60e00408 #define CHIMP_INDIRECT_ADDR_MASK 0x3fffff #define CHIMP_INDIRECT_BASE 0x60800000 #define CHIMP_REG_ECO_RESERVED 0x3042400 #define CHIMP_FLASH_ACCESS_DONE_BIT 2 /* indicate FRU table programming is done successfully */ #define CHIMP_FRU_PROG_DONE_BIT 9 #define CHIMP_REG_CTRL_BPE_MODE_REG 0x0 #define CHIMP_REG_CTRL_BPE_STAT_REG 0x4 #define CHIMP_REG_CTRL_FSTBOOT_PTR_REG 0x8 #define CHIMP_REG_CHIMP_REG_CTRL_BPE_MODE_REG__cm3_rst_L 1 #define CHIMP_REG_CHIMP_REG_CTRL_BPE_MODE_REG__cm3_rst_R 1 #define CHIMP_REG_CTRL_BASE 0x3040000 #define CHIMP_FAST_BOOT_MODE_BIT 2 #define CHIMP_REG_CHIMP_APE_SCPAD 0x3300000 #define CHIMP_REG_CHIMP_SCPAD 0x3100000 /* Chimp health status offset in scratch pad ram */ #define CHIMP_HEALTH_STATUS_OFFSET 0x8 /* * If not in NIC mode then FASTBOOT can be enabled. * "Not in NIC mode" means that FORCE_FASTBOOT is set * and a valid (1 or 2) fastboot type is specified. * * Three types of fastboot are supported: * 0 = No fastboot. Boots Nitro/ChiMP and lets ROM loader * initialize ChiMP from NVRAM (QSPI). * * 1 = Jump in place (need a flat image) * This is intended to speedup Nitro FW boot on Palladium, * can be used with a real chip as well. * 2 = Jump normally with decompression * Modus operandi for a real chip. Works also on Palladium * Note: image decompressing takes time on Palladium. * 3 = No fastboot support. No ChiMP bringup * (use only for AP debug or for ChiMP's deferred setup). */ #define CHIMP_FASTBOOT_JUMP_DECOMPRESS 2 #define CHIMP_FASTBOOT_JUMP_IN_PLACE 1 #define CHIMP_FASTBOOT_NITRO_RESET 0 /* * Definitions for a non-Nitro access * to QSPI PAD after the handshake */ #define QSPI_HOLD_N_MODE_SEL_CONTROL (HSLS_MODE_SEL_CONTROL + 0x3e8) #define QSPI_WP_N_MODE_SEL_CONTROL (HSLS_MODE_SEL_CONTROL + 0x3ec) #define QSPI_SCK_MODE_SEL_CONTROL (HSLS_MODE_SEL_CONTROL + 0x3f0) #define QSPI_CS_N_MODE_SEL_CONTROL (HSLS_MODE_SEL_CONTROL + 0x3f4) #define QSPI_MOSI_MODE_SEL_CONTROL (HSLS_MODE_SEL_CONTROL + 0x3f8) #define QSPI_MISO_MODE_SEL_CONTROL (HSLS_MODE_SEL_CONTROL + 0x3fc) /******************************************************************************* * Stream IDs for different blocks of SR * block_id for different blocks is as follows: * PCIE : 0x0 * PAXC : 0x1 * FS4 : 0x2 * Rest of the masters(includes MHB via RNI): 0x3 ******************************************************************************/ #define SR_SID_VAL(block_id, subblock_id, device_num) ((block_id << 13) | \ (subblock_id << 11) | \ (device_num)) #define CRMU_STREAM_ID SR_SID_VAL(0x3, 0x0, 0x7) #define CRMU_SID_SHIFT 5 #define DMAC_STREAM_ID SR_SID_VAL(0x3, 0x0, 0x0) #define DMAC_SID_SHIFT 5 /* DDR SHMOO Values defines */ #define IDRAM_SHMOO_VALUES_ADDR CRMU_IDRAM_BASE_ADDR #define DDR_SHMOO_VALUES_ADDR 0x8f103000 #define SHMOO_SIZE_PER_CHANNEL 0x1000 #endif /* SR_DEF_H */