// SPDX-License-Identifier: GPL-2.0+ /* * Copyright 2009-2011 Freescale Semiconductor, Inc. */ #include #include #include #include #ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8 #include #endif #include #include #include #include #include #include #include #include "fsl_corenet_serdes.h" /* * The work-arounds for erratum SERDES8 and SERDES-A001 are linked together. * The code is already very complicated as it is, and separating the two * completely would just make things worse. We try to keep them as separate * as possible, but for now we require SERDES8 if SERDES_A001 is defined. */ #ifdef CONFIG_SYS_P4080_ERRATUM_SERDES_A001 #ifndef CONFIG_SYS_P4080_ERRATUM_SERDES8 #error "CONFIG_SYS_P4080_ERRATUM_SERDES_A001 requires CONFIG_SYS_P4080_ERRATUM_SERDES8" #endif #endif static u32 serdes_prtcl_map; #ifdef DEBUG static const char *serdes_prtcl_str[] = { [NONE] = "NA", [PCIE1] = "PCIE1", [PCIE2] = "PCIE2", [PCIE3] = "PCIE3", [PCIE4] = "PCIE4", [SATA1] = "SATA1", [SATA2] = "SATA2", [SRIO1] = "SRIO1", [SRIO2] = "SRIO2", [SGMII_FM1_DTSEC1] = "SGMII_FM1_DTSEC1", [SGMII_FM1_DTSEC2] = "SGMII_FM1_DTSEC2", [SGMII_FM1_DTSEC3] = "SGMII_FM1_DTSEC3", [SGMII_FM1_DTSEC4] = "SGMII_FM1_DTSEC4", [SGMII_FM1_DTSEC5] = "SGMII_FM1_DTSEC5", [SGMII_FM2_DTSEC1] = "SGMII_FM2_DTSEC1", [SGMII_FM2_DTSEC2] = "SGMII_FM2_DTSEC2", [SGMII_FM2_DTSEC3] = "SGMII_FM2_DTSEC3", [SGMII_FM2_DTSEC4] = "SGMII_FM2_DTSEC4", [SGMII_FM2_DTSEC5] = "SGMII_FM2_DTSEC5", [XAUI_FM1] = "XAUI_FM1", [XAUI_FM2] = "XAUI_FM2", [AURORA] = "DEBUG", }; #endif static const struct { int idx; unsigned int lpd; /* RCW lane powerdown bit */ int bank; } lanes[SRDS_MAX_LANES] = { { 0, 152, FSL_SRDS_BANK_1 }, { 1, 153, FSL_SRDS_BANK_1 }, { 2, 154, FSL_SRDS_BANK_1 }, { 3, 155, FSL_SRDS_BANK_1 }, { 4, 156, FSL_SRDS_BANK_1 }, { 5, 157, FSL_SRDS_BANK_1 }, { 6, 158, FSL_SRDS_BANK_1 }, { 7, 159, FSL_SRDS_BANK_1 }, { 8, 160, FSL_SRDS_BANK_1 }, { 9, 161, FSL_SRDS_BANK_1 }, { 16, 162, FSL_SRDS_BANK_2 }, { 17, 163, FSL_SRDS_BANK_2 }, { 18, 164, FSL_SRDS_BANK_2 }, { 19, 165, FSL_SRDS_BANK_2 }, #ifdef CONFIG_ARCH_P4080 { 20, 170, FSL_SRDS_BANK_3 }, { 21, 171, FSL_SRDS_BANK_3 }, { 22, 172, FSL_SRDS_BANK_3 }, { 23, 173, FSL_SRDS_BANK_3 }, #else { 20, 166, FSL_SRDS_BANK_3 }, { 21, 167, FSL_SRDS_BANK_3 }, { 22, 168, FSL_SRDS_BANK_3 }, { 23, 169, FSL_SRDS_BANK_3 }, #endif #if SRDS_MAX_BANK > 3 { 24, 175, FSL_SRDS_BANK_4 }, { 25, 176, FSL_SRDS_BANK_4 }, #endif }; int serdes_get_lane_idx(int lane) { return lanes[lane].idx; } int serdes_get_bank_by_lane(int lane) { return lanes[lane].bank; } int serdes_lane_enabled(int lane) { ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR); serdes_corenet_t *regs = (void *)CFG_SYS_FSL_CORENET_SERDES_ADDR; int bank = lanes[lane].bank; int word = lanes[lane].lpd / 32; int bit = lanes[lane].lpd % 32; if (in_be32(®s->bank[bank].rstctl) & SRDS_RSTCTL_SDPD) return 0; #ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8 /* * For banks two and three, use the srds_lpd_b[] array instead of the * RCW, because this array contains the real values of SRDS_LPD_B2 and * SRDS_LPD_B3. */ if (bank > 0) return !(srds_lpd_b[bank] & (8 >> (lane - (6 + 4 * bank)))); #endif return !(in_be32(&gur->rcwsr[word]) & (0x80000000 >> bit)); } int is_serdes_configured(enum srds_prtcl device) { ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR); /* Is serdes enabled at all? */ if (!(in_be32(&gur->rcwsr[5]) & FSL_CORENET_RCWSR5_SRDS_EN)) return 0; if (!(serdes_prtcl_map & (1 << NONE))) fsl_serdes_init(); return (1 << device) & serdes_prtcl_map; } static int __serdes_get_first_lane(uint32_t prtcl, enum srds_prtcl device) { int i; for (i = 0; i < SRDS_MAX_LANES; i++) { if (serdes_get_prtcl(prtcl, i) == device) return i; } return -ENODEV; } /* * Returns the SERDES lane (0..SRDS_MAX_LANES-1) that routes to the given * device. This depends on the current SERDES protocol, as defined in the RCW. * * Returns a negative error code if SERDES is disabled or the given device is * not supported in the current SERDES protocol. */ int serdes_get_first_lane(enum srds_prtcl device) { u32 prtcl; const ccsr_gur_t *gur; gur = (typeof(gur))CFG_SYS_MPC85xx_GUTS_ADDR; /* Is serdes enabled at all? */ if (unlikely((in_be32(&gur->rcwsr[5]) & 0x2000) == 0)) return -ENODEV; prtcl = (in_be32(&gur->rcwsr[4]) & FSL_CORENET_RCWSR4_SRDS_PRTCL) >> 26; return __serdes_get_first_lane(prtcl, device); } #ifdef CONFIG_SYS_P4080_ERRATUM_SERDES9 /* * Returns the SERDES bank (1, 2, or 3) that a given device is on for a given * SERDES protocol. * * Returns a negative error code if the given device is not supported for the * given SERDES protocol. */ static int serdes_get_bank_by_device(uint32_t prtcl, enum srds_prtcl device) { int lane; lane = __serdes_get_first_lane(prtcl, device); if (unlikely(lane < 0)) return lane; return serdes_get_bank_by_lane(lane); } static uint32_t __serdes_get_lane_count(uint32_t prtcl, enum srds_prtcl device, int first) { int lane; for (lane = first; lane < SRDS_MAX_LANES; lane++) { if (serdes_get_prtcl(prtcl, lane) != device) break; } return lane - first; } static void __serdes_reset_rx(serdes_corenet_t *regs, uint32_t prtcl, enum srds_prtcl device) { int lane, idx, first, last; lane = __serdes_get_first_lane(prtcl, device); if (unlikely(lane < 0)) return; first = serdes_get_lane_idx(lane); last = first + __serdes_get_lane_count(prtcl, device, lane); /* * Set BnGCRy0[RRST] = 0 for each lane in the each bank that is * selected as XAUI to place the lane into reset. */ for (idx = first; idx < last; idx++) clrbits_be32(®s->lane[idx].gcr0, SRDS_GCR0_RRST); /* Wait at least 250 ns */ udelay(1); /* * Set BnGCRy0[RRST] = 1 for each lane in the each bank that is * selected as XAUI to bring the lane out of reset. */ for (idx = first; idx < last; idx++) setbits_be32(®s->lane[idx].gcr0, SRDS_GCR0_RRST); } void serdes_reset_rx(enum srds_prtcl device) { u32 prtcl; const ccsr_gur_t *gur; serdes_corenet_t *regs; if (unlikely(device == NONE)) return; gur = (typeof(gur))CFG_SYS_MPC85xx_GUTS_ADDR; /* Is serdes enabled at all? */ if (unlikely((in_be32(&gur->rcwsr[5]) & 0x2000) == 0)) return; regs = (typeof(regs))CFG_SYS_FSL_CORENET_SERDES_ADDR; prtcl = (in_be32(&gur->rcwsr[4]) & FSL_CORENET_RCWSR4_SRDS_PRTCL) >> 26; __serdes_reset_rx(regs, prtcl, device); } #endif #ifndef CFG_SYS_DCSRBAR_PHYS #define CFG_SYS_DCSRBAR_PHYS 0x80000000 /* Must be 1GB-aligned for rev1.0 */ #define CFG_SYS_DCSRBAR 0x80000000 #define __DCSR_NOT_DEFINED_BY_CONFIG #endif #ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8 /* * Enable a SERDES bank that was disabled via the RCW * * We only call this function for SERDES8 and SERDES-A001 in cases we really * want to enable the bank, whether we actually want to use the lanes or not, * so make sure at least one lane is enabled. We're only enabling this one * lane to satisfy errata requirements that the bank be enabled. * * We use a local variable instead of srds_lpd_b[] because we want drivers to * think that the lanes actually are disabled. */ static void enable_bank(ccsr_gur_t *gur, int bank) { u32 rcw5; u32 temp_lpd_b = srds_lpd_b[bank]; /* * If we're asked to disable all lanes, just pretend we're doing * that. */ if (temp_lpd_b == 0xF) temp_lpd_b = 0xE; /* * Enable the lanes SRDS_LPD_Bn. The RCW bits are read-only in * CCSR, and read/write in DSCR. */ rcw5 = in_be32(gur->rcwsr + 5); if (bank == FSL_SRDS_BANK_2) { rcw5 &= ~FSL_CORENET_RCWSRn_SRDS_LPD_B2; rcw5 |= temp_lpd_b << 26; } else if (bank == FSL_SRDS_BANK_3) { rcw5 &= ~FSL_CORENET_RCWSRn_SRDS_LPD_B3; rcw5 |= temp_lpd_b << 18; } else { printf("SERDES: enable_bank: bad bank %d\n", bank + 1); return; } /* See similar code in cpu/mpc85xx/cpu_init.c for an explanation * of the DCSR mapping. */ { #ifdef __DCSR_NOT_DEFINED_BY_CONFIG struct law_entry law = find_law(CFG_SYS_DCSRBAR_PHYS); int law_index; if (law.index == -1) law_index = set_next_law(CFG_SYS_DCSRBAR_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_DCSR); else set_law(law.index, CFG_SYS_DCSRBAR_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_DCSR); #endif u32 *p = (void *)CFG_SYS_DCSRBAR + 0x20114; out_be32(p, rcw5); #ifdef __DCSR_NOT_DEFINED_BY_CONFIG if (law.index == -1) disable_law(law_index); else set_law(law.index, law.addr, law.size, law.trgt_id); #endif } } /* * To avoid problems with clock jitter, rev 2 p4080 uses the pll from * bank 3 to clock banks 2 and 3, as well as a limited selection of * protocol configurations. This requires that banks 2 and 3's lanes be * disabled in the RCW, and enabled with some fixup here to re-enable * them, and to configure bank 2's clock parameters in bank 3's pll in * cases where they differ. */ static void p4080_erratum_serdes8(serdes_corenet_t *regs, ccsr_gur_t *gur, u32 devdisr, u32 devdisr2, int cfg) { int srds_ratio_b2; int rfck_sel; /* * The disabled lanes of bank 2 will cause the associated * logic blocks to be disabled in DEVDISR. We reverse that here. * * Note that normally it is not permitted to clear DEVDISR bits * once the device has been disabled, but the hardware people * say that this special case is OK. */ clrbits_be32(&gur->devdisr, devdisr); clrbits_be32(&gur->devdisr2, devdisr2); /* * Some protocols require special handling. There are a few * additional protocol configurations that can be used, which are * not listed here. See app note 4065 for supported protocol * configurations. */ switch (cfg) { case 0x19: /* * Bank 2 has PCIe which wants BWSEL -- tell bank 3's PLL. * SGMII on bank 3 should still be usable. */ setbits_be32(®s->bank[FSL_SRDS_BANK_3].pllcr1, SRDS_PLLCR1_PLL_BWSEL); break; case 0x0f: case 0x10: /* * Banks 2 (XAUI) and 3 (SGMII) have different clocking * requirements in these configurations. Bank 3 cannot * be used and should have its lanes (but not the bank * itself) disabled in the RCW. We set up bank 3's pll * for bank 2's needs here. */ srds_ratio_b2 = (in_be32(&gur->rcwsr[4]) >> 13) & 7; /* Determine refclock from XAUI ratio */ switch (srds_ratio_b2) { case 1: /* 20:1 */ rfck_sel = SRDS_PLLCR0_RFCK_SEL_156_25; break; case 2: /* 25:1 */ rfck_sel = SRDS_PLLCR0_RFCK_SEL_125; break; default: printf("SERDES: bad SRDS_RATIO_B2 %d\n", srds_ratio_b2); return; } clrsetbits_be32(®s->bank[FSL_SRDS_BANK_3].pllcr0, SRDS_PLLCR0_RFCK_SEL_MASK, rfck_sel); clrsetbits_be32(®s->bank[FSL_SRDS_BANK_3].pllcr0, SRDS_PLLCR0_FRATE_SEL_MASK, SRDS_PLLCR0_FRATE_SEL_6_25); break; } enable_bank(gur, FSL_SRDS_BANK_3); } #endif #ifdef CONFIG_SYS_P4080_ERRATUM_SERDES_A005 /* * If PCIe is not selected as a protocol for any lanes driven by a given PLL, * that PLL should have SRDSBnPLLCR1[PLLBW_SEL] = 0. */ static void p4080_erratum_serdes_a005(serdes_corenet_t *regs, unsigned int cfg) { enum srds_prtcl device; switch (cfg) { case 0x13: case 0x16: /* * If SRDS_PRTCL = 0x13 or 0x16, set SRDSB1PLLCR1[PLLBW_SEL] * to 0. */ clrbits_be32(®s->bank[FSL_SRDS_BANK_1].pllcr1, SRDS_PLLCR1_PLL_BWSEL); break; case 0x19: /* * If SRDS_PRTCL = 0x19, set SRDSB1PLLCR1[PLLBW_SEL] to 0 and * SRDSB3PLLCR1[PLLBW_SEL] to 1. */ clrbits_be32(®s->bank[FSL_SRDS_BANK_1].pllcr1, SRDS_PLLCR1_PLL_BWSEL); setbits_be32(®s->bank[FSL_SRDS_BANK_3].pllcr1, SRDS_PLLCR1_PLL_BWSEL); break; } /* * Set SRDSBnPLLCR1[PLLBW_SEL] to 0 for each bank that selects XAUI * before XAUI is initialized. */ for (device = XAUI_FM1; device <= XAUI_FM2; device++) { if (is_serdes_configured(device)) { int bank = serdes_get_bank_by_device(cfg, device); clrbits_be32(®s->bank[bank].pllcr1, SRDS_PLLCR1_PLL_BWSEL); } } } #endif /* * Wait for the RSTDONE bit to get set, or a one-second timeout. */ static void wait_for_rstdone(unsigned int bank) { serdes_corenet_t *srds_regs = (void *)CFG_SYS_FSL_CORENET_SERDES_ADDR; unsigned long long end_tick; u32 rstctl; /* wait for reset complete or 1-second timeout */ end_tick = usec2ticks(1000000) + get_ticks(); do { rstctl = in_be32(&srds_regs->bank[bank].rstctl); if (rstctl & SRDS_RSTCTL_RSTDONE) break; } while (end_tick > get_ticks()); if (!(rstctl & SRDS_RSTCTL_RSTDONE)) printf("SERDES: timeout resetting bank %u\n", bank + 1); } static void __soc_serdes_init(void) { /* Allow for SoC-specific initialization in _serdes.c */ }; void soc_serdes_init(void) __attribute__((weak, alias("__soc_serdes_init"))); void fsl_serdes_init(void) { ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR); int cfg; serdes_corenet_t *srds_regs; #ifdef CONFIG_ARCH_P5040 serdes_corenet_t *srds2_regs; #endif int lane, bank, idx; int have_bank[SRDS_MAX_BANK] = {}; #ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8 u32 serdes8_devdisr = 0; u32 serdes8_devdisr2 = 0; char srds_lpd_opt[16]; const char *srds_lpd_arg; size_t arglen; #endif #ifdef CONFIG_SYS_P4080_ERRATUM_SERDES_A001 int need_serdes_a001; /* true == need work-around for SERDES A001 */ #endif #ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8 char buffer[HWCONFIG_BUFFER_SIZE]; char *buf = NULL; /* * Extract hwconfig from environment since we have not properly setup * the environment but need it for ddr config params */ if (env_get_f("hwconfig", buffer, sizeof(buffer)) > 0) buf = buffer; #endif if (serdes_prtcl_map & (1 << NONE)) return; /* Is serdes enabled at all? */ if (!(in_be32(&gur->rcwsr[5]) & FSL_CORENET_RCWSR5_SRDS_EN)) return; srds_regs = (void *)(CFG_SYS_FSL_CORENET_SERDES_ADDR); cfg = (in_be32(&gur->rcwsr[4]) & FSL_CORENET_RCWSR4_SRDS_PRTCL) >> 26; debug("Using SERDES configuration 0x%x, lane settings:\n", cfg); if (!is_serdes_prtcl_valid(cfg)) { printf("SERDES[PRTCL] = 0x%x is not valid\n", cfg); return; } #ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8 /* * Display a warning if banks two and three are not disabled in the RCW, * since our work-around for SERDES8 depends on these banks being * disabled at power-on. */ #define B2_B3 (FSL_CORENET_RCWSRn_SRDS_LPD_B2 | FSL_CORENET_RCWSRn_SRDS_LPD_B3) if ((in_be32(&gur->rcwsr[5]) & B2_B3) != B2_B3) { printf("Warning: SERDES8 requires banks two and " "three to be disabled in the RCW\n"); } /* * Store the values of the fsl_srds_lpd_b2 and fsl_srds_lpd_b3 * hwconfig options into the srds_lpd_b[] array. See README.p4080ds * for a description of these options. */ for (bank = 1; bank < ARRAY_SIZE(srds_lpd_b); bank++) { sprintf(srds_lpd_opt, "fsl_srds_lpd_b%u", bank + 1); srds_lpd_arg = hwconfig_subarg_f("serdes", srds_lpd_opt, &arglen, buf); if (srds_lpd_arg) srds_lpd_b[bank] = simple_strtoul(srds_lpd_arg, NULL, 0) & 0xf; } if ((cfg == 0xf) || (cfg == 0x10)) { /* * For SERDES protocols 0xF and 0x10, force bank 3 to be * disabled, because it is not supported. */ srds_lpd_b[FSL_SRDS_BANK_3] = 0xF; } #endif /* Look for banks with all lanes disabled, and power down the bank. */ for (lane = 0; lane < SRDS_MAX_LANES; lane++) { enum srds_prtcl lane_prtcl = serdes_get_prtcl(cfg, lane); if (serdes_lane_enabled(lane)) { have_bank[serdes_get_bank_by_lane(lane)] = 1; serdes_prtcl_map |= (1 << lane_prtcl); } } #ifdef CONFIG_ARCH_P5040 /* * Lanes on bank 4 on P5040 are commented-out, but for some SERDES * protocols, these lanes are routed to SATA. We use serdes_prtcl_map * to decide whether a protocol is supported on a given lane, so SATA * will be identified as not supported, and therefore not initialized. * So for protocols which use SATA on bank4, we add SATA support in * serdes_prtcl_map. */ switch (cfg) { case 0x0: case 0x1: case 0x2: case 0x3: case 0x4: case 0x5: case 0x6: case 0x7: serdes_prtcl_map |= 1 << SATA1 | 1 << SATA2; break; default: srds2_regs = (void *)CFG_SYS_FSL_CORENET_SERDES2_ADDR; /* We don't need bank 4, so power it down */ setbits_be32(&srds2_regs->bank[0].rstctl, SRDS_RSTCTL_SDPD); } #endif soc_serdes_init(); /* Set the first bit to indicate serdes has been initialized */ serdes_prtcl_map |= (1 << NONE); #ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8 /* * Bank two uses the clock from bank three, so if bank two is enabled, * then bank three must also be enabled. */ if (have_bank[FSL_SRDS_BANK_2]) have_bank[FSL_SRDS_BANK_3] = 1; #endif #ifdef CONFIG_SYS_P4080_ERRATUM_SERDES_A001 /* * The work-aroud for erratum SERDES-A001 is needed only if bank two * is disabled and bank three is enabled. The converse is also true, * but SERDES8 ensures that bank 3 is always enabled if bank 2 is * enabled, so there's no point in complicating the code to handle * that situation. */ need_serdes_a001 = !have_bank[FSL_SRDS_BANK_2] && have_bank[FSL_SRDS_BANK_3]; #endif /* Power down the banks we're not interested in */ for (bank = 0; bank < SRDS_MAX_BANK; bank++) { if (!have_bank[bank]) { printf("SERDES: bank %d disabled\n", bank + 1); #ifdef CONFIG_SYS_P4080_ERRATUM_SERDES_A001 /* * Erratum SERDES-A001 says bank two needs to be powered * down after bank three is powered up, so don't power * down bank two here. */ if (!need_serdes_a001 || (bank != FSL_SRDS_BANK_2)) setbits_be32(&srds_regs->bank[bank].rstctl, SRDS_RSTCTL_SDPD); #else setbits_be32(&srds_regs->bank[bank].rstctl, SRDS_RSTCTL_SDPD); #endif } } #ifdef CONFIG_SYS_FSL_ERRATUM_A004699 /* * To avoid the situation that resulted in the P4080 erratum * SERDES-8, a given SerDes bank will use the PLLs from the previous * bank if one of the PLL frequencies is a multiple of the other. For * instance, if bank 3 is running at 2.5GHz and bank 2 is at 1.25GHz, * then bank 3 will use bank 2's PLL. P5040 Erratum A-004699 says * that, in this situation, lane synchronization is not initiated. So * when we detect a bank with a "borrowed" PLL, we have to manually * initiate lane synchronization. */ for (bank = FSL_SRDS_BANK_2; bank <= FSL_SRDS_BANK_3; bank++) { /* Determine the first lane for this bank */ unsigned int lane; for (lane = 0; lane < SRDS_MAX_LANES; lane++) if (lanes[lane].bank == bank) break; idx = lanes[lane].idx; /* * Check if the PLL for the bank is borrowed. The UOTHL * bit of the first lane will tell us that. */ if (in_be32(&srds_regs->lane[idx].gcr0) & SRDS_GCR0_UOTHL) { /* Manually start lane synchronization */ setbits_be32(&srds_regs->bank[bank].pllcr0, SRDS_PLLCR0_PVCOCNT_EN); } } #endif #if defined(CONFIG_SYS_P4080_ERRATUM_SERDES8) || defined (CONFIG_SYS_P4080_ERRATUM_SERDES9) for (lane = 0; lane < SRDS_MAX_LANES; lane++) { enum srds_prtcl lane_prtcl; idx = serdes_get_lane_idx(lane); lane_prtcl = serdes_get_prtcl(cfg, lane); #ifdef DEBUG switch (lane) { case 0: puts("Bank1: "); break; case 10: puts("\nBank2: "); break; case 14: puts("\nBank3: "); break; default: break; } printf("%s ", serdes_prtcl_str[lane_prtcl]); #endif #ifdef CONFIG_SYS_P4080_ERRATUM_SERDES9 /* * Set BnTTLCRy0[FLT_SEL] = 011011 and set BnTTLCRy0[31] = 1 * for each of the SerDes lanes selected as SGMII, XAUI, SRIO, * or AURORA before the device is initialized. * * Note that this part of the SERDES-9 work-around is * redundant if the work-around for A-4580 has already been * applied via PBI. */ switch (lane_prtcl) { case SGMII_FM1_DTSEC1: case SGMII_FM1_DTSEC2: case SGMII_FM1_DTSEC3: case SGMII_FM1_DTSEC4: case SGMII_FM2_DTSEC1: case SGMII_FM2_DTSEC2: case SGMII_FM2_DTSEC3: case SGMII_FM2_DTSEC4: case SGMII_FM2_DTSEC5: case XAUI_FM1: case XAUI_FM2: case SRIO1: case SRIO2: case AURORA: out_be32(&srds_regs->lane[idx].ttlcr0, SRDS_TTLCR0_FLT_SEL_KFR_26 | SRDS_TTLCR0_FLT_SEL_KPH_28 | SRDS_TTLCR0_FLT_SEL_750PPM | SRDS_TTLCR0_FREQOVD_EN); break; default: break; } #endif #ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8 switch (lane_prtcl) { case PCIE1: case PCIE2: case PCIE3: serdes8_devdisr |= FSL_CORENET_DEVDISR_PCIE1 >> (lane_prtcl - PCIE1); break; case SRIO1: case SRIO2: serdes8_devdisr |= FSL_CORENET_DEVDISR_SRIO1 >> (lane_prtcl - SRIO1); break; case SGMII_FM1_DTSEC1: serdes8_devdisr2 |= FSL_CORENET_DEVDISR2_FM1 | FSL_CORENET_DEVDISR2_DTSEC1_1; break; case SGMII_FM1_DTSEC2: serdes8_devdisr2 |= FSL_CORENET_DEVDISR2_FM1 | FSL_CORENET_DEVDISR2_DTSEC1_2; break; case SGMII_FM1_DTSEC3: serdes8_devdisr2 |= FSL_CORENET_DEVDISR2_FM1 | FSL_CORENET_DEVDISR2_DTSEC1_3; break; case SGMII_FM1_DTSEC4: serdes8_devdisr2 |= FSL_CORENET_DEVDISR2_FM1 | FSL_CORENET_DEVDISR2_DTSEC1_4; break; case SGMII_FM2_DTSEC1: serdes8_devdisr2 |= FSL_CORENET_DEVDISR2_FM2 | FSL_CORENET_DEVDISR2_DTSEC2_1; break; case SGMII_FM2_DTSEC2: serdes8_devdisr2 |= FSL_CORENET_DEVDISR2_FM2 | FSL_CORENET_DEVDISR2_DTSEC2_2; break; case SGMII_FM2_DTSEC3: serdes8_devdisr2 |= FSL_CORENET_DEVDISR2_FM2 | FSL_CORENET_DEVDISR2_DTSEC2_3; break; case SGMII_FM2_DTSEC4: serdes8_devdisr2 |= FSL_CORENET_DEVDISR2_FM2 | FSL_CORENET_DEVDISR2_DTSEC2_4; break; case SGMII_FM2_DTSEC5: serdes8_devdisr2 |= FSL_CORENET_DEVDISR2_FM2 | FSL_CORENET_DEVDISR2_DTSEC2_5; break; case XAUI_FM1: serdes8_devdisr2 |= FSL_CORENET_DEVDISR2_FM1 | FSL_CORENET_DEVDISR2_10GEC1; break; case XAUI_FM2: serdes8_devdisr2 |= FSL_CORENET_DEVDISR2_FM2 | FSL_CORENET_DEVDISR2_10GEC2; break; case AURORA: break; default: break; } #endif } #endif #ifdef DEBUG puts("\n"); #endif #ifdef CONFIG_SYS_P4080_ERRATUM_SERDES_A005 p4080_erratum_serdes_a005(srds_regs, cfg); #endif for (idx = 0; idx < SRDS_MAX_BANK; idx++) { bank = idx; #ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8 /* * Change bank init order to 0, 2, 1, so that the third bank's * PLL is established before we start the second bank. The * second bank uses the third bank's PLL. */ if (idx == 1) bank = FSL_SRDS_BANK_3; else if (idx == 2) bank = FSL_SRDS_BANK_2; #endif /* Skip disabled banks */ if (!have_bank[bank]) continue; #ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8 if (idx == 1) { /* * Re-enable devices on banks two and three that were * disabled by the RCW, and then enable bank three. The * devices need to be enabled before either bank is * powered up. */ p4080_erratum_serdes8(srds_regs, gur, serdes8_devdisr, serdes8_devdisr2, cfg); } else if (idx == 2) { /* Enable bank two now that bank three is enabled. */ enable_bank(gur, FSL_SRDS_BANK_2); } #endif wait_for_rstdone(bank); } #ifdef CONFIG_SYS_P4080_ERRATUM_SERDES_A001 if (need_serdes_a001) { /* Bank 3 has been enabled, so now we can disable bank 2 */ setbits_be32(&srds_regs->bank[FSL_SRDS_BANK_2].rstctl, SRDS_RSTCTL_SDPD); } #endif } const char *serdes_clock_to_string(u32 clock) { switch (clock) { case SRDS_PLLCR0_RFCK_SEL_100: return "100"; case SRDS_PLLCR0_RFCK_SEL_125: return "125"; case SRDS_PLLCR0_RFCK_SEL_156_25: return "156.25"; case SRDS_PLLCR0_RFCK_SEL_161_13: return "161.1328123"; default: return "150"; } }