diff options
299 files changed, 1131 insertions, 91955 deletions
@@ -118,10 +118,12 @@ CONFIG_POST_IO=y CONFIG_OVERRIDE_DEVICETREE="" CONFIG_CMOS_DEFAULT_FILE="src/mainboard/$(MAINBOARDDIR)/cmos.default" CONFIG_CMOS_LAYOUT_FILE="src/mainboard/$(MAINBOARDDIR)/cmos.layout" +CONFIG_PAYLOAD_CONFIGFILE="" CONFIG_BOOT_DEVICE_SPI_FLASH_BUS=0 CONFIG_UART_FOR_CONSOLE=0 # CONFIG_CONSOLE_POST is not set CONFIG_POST_DEVICE=y +CONFIG_SEABIOS_PS2_TIMEOUT=0 CONFIG_LINEAR_FRAMEBUFFER_MAX_WIDTH=2560 CONFIG_LINEAR_FRAMEBUFFER_MAX_HEIGHT=1600 CONFIG_BOARD_DELL_OPTIPLEX_760=y @@ -141,6 +143,7 @@ CONFIG_SPI_FLASH_WINBOND=y CONFIG_DRIVERS_INTEL_WIFI=y CONFIG_CONSOLE_CBMEM_BUFFER_SIZE=0x20000 CONFIG_CONSOLE_SERIAL=y +CONFIG_SEABIOS_HARDWARE_IRQ=y CONFIG_MAINBOARD_SMBIOS_PRODUCT_NAME="Optiplex 760" # CONFIG_HAVE_IFD_BIN is not set CONFIG_PCIEXP_HOTPLUG_BUSES=32 @@ -508,18 +511,36 @@ CONFIG_MAINBOARD_SERIAL_NUMBER="123456789" # # Payload # -CONFIG_PAYLOAD_NONE=y +# CONFIG_PAYLOAD_NONE is not set # CONFIG_PAYLOAD_ELF is not set # CONFIG_PAYLOAD_BOOTBOOT is not set # CONFIG_PAYLOAD_FILO is not set # CONFIG_PAYLOAD_GRUB2 is not set # CONFIG_PAYLOAD_LINUXBOOT is not set +CONFIG_PAYLOAD_SEABIOS=y # CONFIG_PAYLOAD_UBOOT is not set # CONFIG_PAYLOAD_YABITS is not set # CONFIG_PAYLOAD_LINUX is not set # CONFIG_PAYLOAD_TIANOCORE is not set +CONFIG_PAYLOAD_FILE="payloads/external/SeaBIOS/seabios/out/bios.bin.elf" +CONFIG_SEABIOS_STABLE=y +# CONFIG_SEABIOS_MASTER is not set +# CONFIG_SEABIOS_REVISION is not set +# CONFIG_SEABIOS_THREAD_OPTIONROMS is not set +CONFIG_SEABIOS_VGA_COREBOOT=y +CONFIG_SEABIOS_BOOTORDER_FILE="" +# CONFIG_SEABIOS_ADD_SERCON_PORT_FILE is not set +CONFIG_PAYLOAD_VGABIOS_FILE="payloads/external/SeaBIOS/seabios/out/vgabios.bin" +CONFIG_SEABIOS_DEBUG_LEVEL=-1 + +# +# Using default SeaBIOS log level +# CONFIG_PAYLOAD_OPTIONS="" # CONFIG_PXE is not set +# CONFIG_COMPRESSED_PAYLOAD_NONE is not set +CONFIG_COMPRESSED_PAYLOAD_LZMA=y +# CONFIG_COMPRESSED_PAYLOAD_LZ4 is not set CONFIG_COMPRESS_SECONDARY_PAYLOAD=y # diff --git a/Optiplex760Experimental.rom b/Optiplex760Experimental.rom index 145807e8..73128eb7 100644 --- a/Optiplex760Experimental.rom +++ b/Optiplex760Experimental.rom @@ -213,7 +213,7 @@ coreboot-%s%s %s romstage starting (log level: %i)... - + @@ -971,425 +971,452 @@ W„ ¬ùÅïÁë‚Ô¨ºérXÆM´¸&=FâQóm§˜h? Þä!CJÐ+Í™,ÝŒ²D¥ƒT¯š å1àÙnº…ó° S^z†EÅ ãüy¾w€¡SþÕjo½8Y” v»a"&í /IŸ€-¯IT_&Ã- ® ‘5Ò ô DÀü6#¢ ÐDçHUS¨)p~mhy. ¦ºóïGôÖb pôÜ¥-–‚Dšœ¯Ab!«òî¥i³^Ôþx”IëbëÆUÅ0½ÌÜÒgxÓ€ Õƒm&d1öh"C> Nƒ#ü &yè*™(ÉÚ†«øgÈQU<õ³±ù‰”˜¼æúδ3ž ¾Íkùš\c¡t“>ÿq1[Ù¿„ ® <N¦m]Ø<ê9ñçôu.Áp>5Øpœ¦¥ š·™K‰«ö Iv‡v>ޣxŒN×à áè–=]B½6ñï2z Sÿ 7ä5°wÁˆº0ƒ= ÎL"íŸxíRƒ UYqâÑb_* -W„ ¬ùÅïÁë‚Ô¨ºérXÆM´¸&=FâQóm§˜h? Þä!CJÐ+Í™,ÝŒ²D¥ƒT¯š å1àÙnº…ó° S^z†EÅõëõeZ'Ÿ
á-p oïò;—Œ"r„Û?áo´§ÒÛ8ZȘ3¼Žã;]ñ{>h *¨¼µBK> q˜$ }k{õÈ>@õ3lt(/R ®º/ö]Úºfo7þ¾¥s7ýèÆ_»=CÀ4éƒü<js–Ðà;¥lÝ£ëaeb, <Ç…G{.€–“u±)m´«‘N•ÎPã¥H
qSé”ìMÜ57ë¿MËã<*tÿ2ËÓZ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿLARCHIVE -\?ë1Ÿ(9
Ã8DÂ'½)¼qýê ¡Kîëõ„BΙGŒbŸiioŸçnñ»F`>̘Y ’.Ñ3{i<§¾Ëþ^‡>µþ^¬P -(êÂ;ƒ|}\M@¢+þ•ÁzÛ èuý|{ÛŽ¨ %61YHýe¿¬¸Nhöä§ÅlCÝ7ȽфÌÖÜ¥.HÜÕ›o™E€Ä#åN]:ðÿa¤1 èºcÓ誟ž½ J‰Ÿ$6ÁEéFý7× ªÓ#@}}´ŒÂÕ <0ð:3êpAuÂÅîlñTp-›œÃ×ýþ=½)ÏŽœ[e@ móàkíý`“ŽBV”\s,¤?_ }G¬â¾ò!i‰¦'Ÿßg|íL7шªëJSˆ ó/ Ær[ü¨tõóUßà\"oódÅJíQ¦ L aµOwáž¼ 5 R<$ÕýŒ_N*!GúKf¨ºÜv1‘!
8úò+2+®TÝÛMiºéÁ7=f^#«e½¿^X[/B—T©Ø4²#HXeY;5¹ƒk‰:çÈ4ˆô9~ktâ*¢ÖÚ]£ -ÙîIå”Jèƒùß(7y¯iç’rÞu2 êÊï÷WY«KƒªPÛyá} ôFäèôH‹hU“;Dª„§ydò]g,y›¢£‹,:¾amhäZKïF¿³´Eõ”FwÀ¼;ÜN^¢~g¨Û€xFåEQŸ×Ý_'ëó_ —ÄØ«~j«Ã+±ÿ°‘Uù
q ¾×õ’2NÄf{èç[iÆ=¹ás—ˆF Oí²Ë&¾Šäu²müø( °7+ªÀ ¹üâm‡GY¨…kÅž!³‚\òSÌ:vqÛ]¬~Ñ•Ÿ/:}À¨_”FÉC¡ÖŒÙü½ÉÌožþ½Ò.ê"“(nwyØÞû ÛÌ: -ópÉê‡ÒçîšãÅ] -pÿîp+2«£ôr¥%€$«„1?°ú1 œ 0¢î .Ù®¼L¯ÙwzvÇ”¦&ÂøX<×-ñ³ŠWxÀ*5’å Í}¸Ka¿O$Qz -¸Ý̓ý³.Ëì Qa KµùóUp7¾Tçǧɴ-†ò›£,€~K}@ÿoB³½Á¾K³é[ë/`; ü¢
û ‰nžNĨÉ{&ßI/±ñ‰LÇ61¸ -<(»Òùÿ7¥3#Ï51Únÿ„¶‚(õó
Þ‹,ˆ3D^ô‚ÏDô&Æ ¨°…[Ȇn:p…H_}Ö1u¸yÑ1ö{m^ ß}6Ó,Þ½H ²€¤¡…!°d·¡išžü?ìßK -\!çs4æÓÚ€{»4› -9kC¤z±ƒ¶tÿ‡¥å µ²Œ³´cÅÈdµë÷€º1’zë\UŽ4¢( ôŽJ ÍÖZïs,íx›½ÿ”Ú)NÜ)RR4iÔ] -²ÄÇ6÷º‚áõà;tHýi·¹ tÏJ˜1DFT˜•“sA˜×™ ˜¿FÆsRe8‘ÔV¢«‰…aP$/Y¹¶øÍ/§SÍTã*%Ðë|°7k›¾lŽÍ?¨'#êm´îùÏ‘“È_ZàA´Þ=Ê°%GœÅ<{Â2åJ2‚¿Õ1m5}ë V¯¢‡´I°n¼Ø„ÑÝ“3 Ê$âëpxX›{g³h[¼‹¶Ú¨š ƒá…ý¶
Ä‘ü?oê‰ ÆcÐbô¸±ixTU‰5øÃâ9^ƒõ˜"ü„¡u×÷ -V8ØÇRéˆ “#ˆŒçæhŠ§ô«¯ .0heœóãóÄ£âxÉ,@ðÒ™ L([°ŽÑ R/J-€O㧠-£¢,bæ1ÓÿuÊËÌ]žÈÝ?˜sV_r<P¼ôp¼dipy@?áÙ$ëüÙ×Ô¶ä¡GÙL,rE|U“ -©ôú¼÷ðo®jÄÆÆhìûr(Fúý¼Xk±Ž|{h+bã»~ß”5/©ñhzÍq;(-){‡¤ÉnŒç4 hÏìH)üÎŒ/l·0¦'–r4ÅåQ¢kêúì4ùÒüO•Î®#C„žÛ¶oX’VÁ4[=ª*ê„H@çüq4Ç’ùtºrK×ú埚‰•ë™]~¡vV÷ÞE M„JmmÆÜGVsK$XEZKµkµºÓ½ìž:ºUÐ+3!°úŃó·wÌ àiÖÖš©÷ÐEã#scøÐåcå›Æ@rpM‡‡#An¯jrK|üß”ñá`Ÿ´ðhË{ž±S×Æ))º¾Q‚æ*þªñ%í®uÛzu‰ df;QÛËÌû¥é~Ž)aíÈ>‡ h_Mà-n¸Å4b\м#Œû–öm?þ‹œ|G -Wnâ -Æ)‡“¡gœ«}c‹Ã,Šôk r%˜c94Êþ8»pÄ\tU'/ÆräÈãÉ~xÅûýd£-¢ÊI(I¤&ñ‰–¦8Ñ6 ìÝÁàé…tóßc ·Ê·~H?*¥Wîz mJýºÝ9Žf4têÑð!¹Ú'åjst,š¥9~6HƉšyÞX‚Œ¾ÍSÛá†ò¤0Pôþ`äO«‚ÚOò·À¸ ÇßÔ s °0Ï § þ B (ýª§Õiq˜mÓ ˆ& ˆ Øv€÷ÇD²x/xfÇ ¬Àê\ÓjѸOÕã…AéE^LG[•×nQw¿0¸´ºZK*øçÜp]Õ†,$Fí4†«– Y “/pn`Å»GŸÓ컟9e5…ÿ#•¡þ V/3`×Ï¡hÞ—dÚð`¢$â!ªH>Úþ -p_x˜ï)-®…DZJH[•\w Uâ¶éZ©Ð¢Û{§-F[¤§;Šß£ÐÃé™Hï`'Æ67v¶ŒM ó ¸+D–q™Lç„°§eõþìj=5Íÿ ï‰ã3ðˆÑ÷ë'#@ŸjõÊ~p|fô&\é¨@‹š|ú6ëžöó.
tvàß:e|6Ò“MbºøÝ Õœcƒ\©žÒÆs -k“¢þ›ÕY)SÚp8áu°Î6_þL‡Šgu±•
`ÝlŸõCø"CÇÏ…às#¾|ÈÍg IÖÿbÛ -\)oNbµz‰B²Ò2•1©& a%0 Ï'f ÔºZÅñ|ð ’¥2µvÇTRº–Òwa0(å‘7I_ýÀ¸VíZ|ÔvWìä èá!Þ‡cÒ¾›Ü«0®$ìÙôËh¡uq }ÝÓ¤¦åb”zG£GÉn½Y‹#Kwˆ_îé<É_4Ê:ø€<!‰qŸ§oöi3 -¦–ïL$ô·„M ÓÔ›|3Ö Rk¤õë]®\øЛF½†,q»|®›D2)Ôåá7òƒA`ÂYPâž+suQ8ñŠÆŽ=ñš¨€àÏÇ -3¦Œ×¹3”c“6f4˜V¨Ïbí¿º¸?ª%âß!9,µ<à 6Ynl†â#‹¯ÿ©ø~£Bã.ɳ° ‹Íiï6õ«Æ™¨³!MMéi‰ó•i5¬’0 Tøàƒ™‡¼ßVÈӘȟ
ÓVY tWLhÍÞ÷n#
-uýlˆñÊ7_[Ùj€)¦Þö¬=ò…wv @¼q¸J}YȲ»ÕÒ 8Ü+eP…â¶èfÎ#6O -%F½%§ûR]cÏä É™Kñ÷úä Ï;-I ¡Ñö—¬Í@Í[迃ëK¢‹û³ j"2 S!S?jp-Ëów - *M¥k‹ƒ{4x9O÷µÁâ:7=w… œÓ¼Ü‹YoJÓð Ìý;»l‘e¸FJÌ3¾RÍÃô»Gíð ÒG2hÔ#È5 1VSã>¹aó#ðHE°Ëªã[èx¨ÊŠÑE@} ¼ö
ß ë‹Í‘jvo@Yy|Eì±3]#)æí–5y}¾]¡¦/Yœ JƒÐ£Ú—•%‡5yT{ÞT cÌÆåyÍÏ„'FÍÙ‡¨±‚¡<ë䦘šþ… -€4]£cJˆÙ&)åôØXÂÓÑ—Úç+ hÅ ßøœ7â -aدíøù¢ŸX³Ÿ‘ë>4…+íqbôÖ^i› FýñïR%â*ŒÔþõn1 ‰Ýê˜Ç†:%ewþÂúá1ØEK—Û0H ”SƧ3ùTO -ÙÆYSÒ6ãæcZ+W:lŠ’½¨û££þ-¥hk½÷›€#™©Ä$¥Õ÷ tŒ]îÓºKúr… £JªRUI‘NÚu8«k:ú]
yídUµiÿž¹]_5äÊH¦¥é¬AªXéVü–T
c=G&/õª^¹Jn^¼üW± -ÑçìPãW1êOæ•e<{46’Üd¬Oµ³hqu©1™²sEŸŒ)ÕŒž¾K¹$÷@¬Ï)¶Á–ÓZ%ÂÜç×pX÷ -©ª5]ŒÂ-½2=MɱֽÍ6ûµ8¼æ“‰ò´GP×W*šîŸÝ<d´C:¯ «<ÁœO‚ÿåó ZxGoë«ØZ‘”|ð#I¯'Uܯèoe 4Í 'É‘Pbš/Z¯iÂ<ؤ4ØŠ= $·GŸT¯r{´¯å·[I&ïeJ<Hþ|‰Ð #Þ5þz.½{-î×ôF}Fñ›dhêˆ6áUùB:3¶ìÑùGT’Ñ’Cž>±.ýÃgý;Ú |ÛÜa¸ÉOã·£|Õ§ˆ -ö
w¤DÿÀÞZµ½ÎóÕcáP³áÀÀÎd—rœ"rix£js_È;‰vyñ×ÇyŒ³ŒUDi%¹\ dÍë•´és^d#‡&Ï{¤í;å¸ uh•ú‰ pû˜LyšÞÈ„1qXXË
^· ƒæ¹cmºjUq¬CŒ=y]³¤,4UÛµ¥Äî§à1Eé>Œ'¼@¿Á•ÖùÊ+“ÿË<PtG—‡˜?êÇý¿ãÀ)ù>Àç u„õ{’gÕÛã£RЫùˈ±-u˜IC¢ø“BÍ ,ÉGºÉs vHå9TÆETZü¬×åH?Ç/֦ΰ[ˆ¥Ë7¶)v ) ÊÎÚ„Sç$¾³žoü‘?«ôï ò¸‘{´Ñˆ·-ä.ü‡|Öz)ŽÔq * -@íR÷ φm ÿŒÉM—R ·GkÚ†J -ú"æý% -ØÚ¢Èbö-?Æv¤sùVA”ƒ’#øZb5ˆa‡ï”3ÓòªDç?ÔÇ+Qßò”2QcH±KUüX\xtx&lu>®lJŠŠ -3Jâu4½ž×k‹Ø¬Z4tO Æ£í^‡qgeí#¶‘N{xŸ)x'_g¶{Ðû°ç q_Ã||hýI^aq™Ö–öýФWè|ŠiíÑúa?ÂôÂS‡©üí»}å! i¯º`<¦ÉªoŒ¡o§'~P<6ûKÏÔÁªé= -›ßŠVõ„?rݦ8`b ¿˜U›#CÃpùŽNø69× ¬Þng. -ø⎼†#§ Ÿ\°@rVŒ”œÅšÂá&Dq<ƒ#Fx è1¶5öù$Õöùm¹¥Ïs¸©VWhãnó`Dé3ùNCúkî袕‘[2‰+…ss!-ŒF´þ.Nç)Æ õüˆ9nà÷e3Þ7†mw¨.¨Õ’.@è+Û=Ä ûÝ“»ç9·¯d{üÀÕ2t£ÃY±
°(•E‘êÒC§)ÿ“ ¶/ÞwéØ–ãJðÊv©*fKœ.ys7åQ¼«¾™Ð:w©9ws‹…
kÊ–h…â¢ú%lT ö£ [ú¸]ݺª Ö—‹iÀ%vþhUE•Y5-ª‘FmAÑá9×D¯˜/…vG -w¦¶G—Kñê—E>Ìvà”ëU¦hK×ÒÍí¯u"3×–ÏÖŽ@tÆØ/'¯‘¦p!T o*ª.Z6e Öó¡`0D -˜…7a5$S¦f5B-´Ž){={$ˆ°´©ÎlMÞ -ñÕ ý»ýÐà>ÿ°¦¼§Hö1Aµwñ‰Õ30ÕFÑ•At Wú›Ü”d²šØ&ð++`èæ€t:±Àq
Õó.€ÊÆËk“W<¯¢\þ×P¥Qº à `-·å‚ã -ÒUí¤Ÿža”ì]ÌÙ1ñ\ËöËŸ¾ ”‘ëcf<l3’½pÊLÂœÍì¡( Ù²gà>(jOùÐÉmIIBø$žV²(
9ÉðÔ„ÜÛœ·Ë•yˆûPöÕ qšÈëÂ<´ k Pikê¦)¾ïÓXž^%DakAhe§2¶ÓP¸¦ÌWù -zû‰SµPDV—ðu
(:¼Øw i^âÔœSø#+A…ÿ<z5áðA ½¸$YÀzǸŸéã5„SÚëݦäa]T§€åH£ÂH^
ïÀ‚dÿaÖ)=¶Ÿh"ísˆG™ã7.»”?V²¬¬*Õ1Cø½„dÌ 3qÀðu
ºOù”ů^äHYöy.D˜\|)àÁ6¦MlÄVw ]o ÿ°,û«þ[sì ê2Hñæ?²×t6*DuN#+Ú©]š3I£kcw::ýPYI'xSPZúvåóêа´m_|ßcõ ‘•¹zÖ؇T!]t‚ˆK±Ó¬0OŒ}6Wè<åÿ¯•ÏÝ^äX4U&8nòš¥Ó¦üùø Iœìs…©ÜsOØwÚsÇ1=£Ùe"Q(nu<ð²ÏTsEú4€FÇ< ìV¦PëX]/{WÌìjh“ʹÝí'aBFk)Ô‡aã—)$w$/œúªÉ¿‚ Å9@„¡mLÎ00ÌOKÀbb}Ñž“#œ>‚T û4§Eç‹ÍÞ+ƒG`mÝ&ÃúröØ•Ì€'ãäæó—ü¹º² -->iN”w¢ï+m«ct¼k>WA ”J%K‰Ë‡Í¼[©&ó ;Y`½ÅݨFü¤³ÄH#ÈsbP¥6q< -ªöÈøãr H‘xIz0i}ãÞæ«‚íAÌ =:ÁnDpÜy;ŠogºÞáþô’À¾?vòq1¾è?CH˜ª\’bó6CFœ„Ü ¶.Ä÷Rg;Ø=œœ™;Mž*ÙW{fd\0ç¤òx r:¢9Tb#¥ W5Ú‚°a¦…ùƒrTÝ„5߈ş±ö¨ïŸiS„òÖ#ß<¹x¹¸œ£´ ëõgœá!Èÿ"lüÄtž¶N¨bòêQ:¾™ÿ2g
q¸eÖ¯¸«å ÓÏ3…_hΪY 2,ß"<˜£ ÎJîS눲—Oñþd¹Tg]&þé¬ÿ£g -ÐgÐj‘*ž¾›¿‰ ÁxÍðÇì™"«K™ä€óÄ@Ù)å)®¢âB´\ÙÏ•E`Ê ù:2ŽU4ªU¦4ŸO=@ ]Ù' ¸QyŽ gÚÿ,ûÜ”ó;ÚuàÕ •U‹ÍŸl§j:Ô’¤nGWo`C à
¾¥Öø€’ûïÓ’kD¡>õŸjv÷Qóôþ‡ô{ñšÿƒý‹ðÒ
^—ÀE—ƒwb:
BiÙîo!>Àû¾¨èaòDY° û܇ÂòŒ¶øn´{¯tà9Ï£ù¢…xA -•¶`f
ÑÕ ÙÒΩ•´N
Ãæôg|ûE Fxœ kòÅq½É$Ò"îÝâMÎð|.¹Ïÿ‘¯‹§ÕJôdÐ61ÛûÙ}m 5cVþǹ»p|£Ë¡¤swÍÉÙ®÷®[0T¥ ¥ -[´ ìüÊËAé×Yñؽý¬ˆé¦Ä‰–ÕhMÃÝNf‹r°VýÑÒX-¡ÁXjÊ}+ïUD=ž´RGæ. j¿nÍv‡%L©Ó?ÁÁ ~îôq²ÎKyvq5{ÏfÜ\!¡jøs:»]L)+p „F÷hÕ‡aË[¤¨ìõrƒl‚M¿ÙÇçX’Ìü$ÆÖ/àɯ£/õ&8L³ÄÌÓÞëýK»÷¹ë7x½•„ ¤¬‘êÕ¸ObmcàYjNÀ %¾ ŠK¶éóS E~Êú×D'Ñ -!>JÄê9¨mt!Í]“ŽÿüúÌýÆ,ÚM©K#‹ç×ÌýùŠ°óiÝoaÈC¹»dìÁt Kºz<æ¦Û¤Ee9ª\E’€ öèÀô,ê]‚au¡ó€b‘í Ù¹'Ó¦®ŽÔ“}âIÂ&¹fÒT&°Y°|ˆ‹÷WÌ>Ò„¸œäèh0|]A™•X×õ}±nð]|c„ñä2/Çì©Ãú0†u^?}t„cAÆ\’ô;µÆa{p§¶ûTã-K -ÁìAõI‘XÆêŒc{þiX5åå\hQÀ>G—K!oÙ+d¡x=-î:3E{7»H÷<2BÖÒ?ú$ûX+V¢Qpsz©xo·¡|8ç wÚ5'ΓGk˜!í§üQæï•Œ‘£í$µÚ;h²N)C’{6ðjËU9‡Ä :âæ!ìÄmPÏ© -‘ÔéÉÅ©g 9µ-†%™DlMÌðVE`R-Ò=F ’Ts¯õ -¸Ü£–tÑÀÑƯs@¤*\äάV¸½øÚÿy éƒg’ödyö5N(ü*ˆü¶®M"ĸÛNg콇Õ*tÔP³Š`I5c¬è€Ûá~¢(ÄÞ w1 ù™ø|&€°ŒTºËäËsñ
µ¶†H<H ²Ì÷[P§uÅ&šŽ™N·B¢
} -SÙ{AÆ’g¥AÔ5>ê]#ø¼÷T¢ë
Ò±çKF1¿× R9ˆ¢àãÚge…³—\ZißÃYI˜O #;m# ˜«…JæÇm§½Qqfå©<m‰–u •êÆF„àã~/H%}ÄøZæçóe)< _^¹“Y¹}mekcÐ/2)€xÕÆßpŠ0×ðܨB¢Öy02«ªyÔ?;<›ž" ’W …þØTÕý¤þ@;|‘‡ÙZëÑZ©yb<!qÕû%c-—Œ¡Ï€lÞ´–N5q‚JΊ$‚dP‹íÖ—×Ï QKïOï““õ5îOøoÆëy º²è¡7ï›ÇgL œ½¸ˆá·çÇV ´(EL7!=ÓhèÑ™Z5He…}’v½ -¿ ÛlÃ4K¬D‘ls'&u ê5K¨ƒ ¥ÛjíZ£udI·ÃñCYËK&u -Ù£4ýq•Ê%–±6¼“ƒÌ,ª<|1ŒzôRðß=–“iÉÄâŸÿ“oy‚/'´ÇKœ¶ò£6É4™otøª_y¹ •Ÿ&[Þà?|mÕ¶"#}†Ñz¤‚¢½~œ ~Õ Ú€W™(õÇþìæ,ô^.|NÜêëžU;mõÔ:¢+P~‚WG§ÄUÄ€KÞH³y²¿n’…>WOÚü -4¤ã³@)n¡Ytí‘ßà¡™+ˆ®4s…î²A¨7e—ºIÕœ‚™¥ž‚®—DKÌv"3 å‰$ˆœä=Ö¨U0ÝW ß¹®Ì™ea·?ßX‹Tdn¹Al¨[×п·*¦=ºßœù‡÷#ÏÍáúêR*¸Ï¿#PI 5°Žëíó²y¾¬†0»Ë¦7xRú}{¸z¿6š4 ©ÉH+ŽM7Nœ“1Æ+ùûvÑ(Z›–‡(7‰B4o„*&zõ*V"WÁã4o·1êîû*í©uãâ›SPk=ÉÊ -ªIçpäa³ +ø°þÙéßäÆäàï ; h¡SüäÚMÜ”ëeÎÝu¾Ð¼PƒßB ¨ôbÌC¥# Ùk'S± /˜E =Æ’}Ä´§¨_ñÈ%ÿU¬dÉt´Õï: ƒ¼®ñ( ”:)íT~Hµî´®‘ÓÌx̶֨ÍÇ ÑÌëhè‰"\awûR©››2Õnm¨«*Urhå|íÇl ½?™.}¬— š$bk™²ï~¯Ý_°Öïõ׉ÑäÝüW -ñI ÷,Åú‰ ô¡wKx+¼1á*>9Žs -ÅUÕÃæ{ßDDì `f÷Ðøs÷ ¹v׶_nÈÿpôôC`SíUÊîrIèÌ›Døé Gà%;> ‹¦×6’ LõG³UíˆlÕä*šOA€ŽÆ¬Ù4…Õó=rèyÉ‚ø¡-) -‘¤‰ÖÀ|.·§ÌVDêAj¥ø“ D *ŠNN’FtGÉå(¶L‰‘÷E9úr®xäjé}P)²¼§–?Î9u©Þ\ØFÛšO*až4Ó -Lg†ªÿl£"•_Ë>öhEkH ’bX¶É’*ûçF»]’ð?*ÒSñRoo9n¤þV ¥I~G.pÁÿLÛ”¤YÞ -aò=Éûµ* Þ a“<(ò¯-ÉïK@tNVŸÂ&p! zO‹ƒàÜé-˜`P´£0Èò£úá<ö£ ©5ß ¹•WA¤Aç$9ò€úÉ´òuC³5VÌn ÀØ<ÒQ‚‰M2þ; ºUn˜Gœ2„'óDõ˜Ü*à¤]hÝ7´5ž€ã?F,%á‘Æ2RpaŸ2(‹ 5þè›…óÒë¹H=ÑåvÛ àtî=~²dš?bg×âÞ“õhÇÝ¥r—òTZâW„žat–Ü Rÿ ˜äP<¥uSøËQ¥‚·L°ÊÝÐ"½ç¶ÝÁu+ÀJÀÙ‹?Õ©XhVÕò¬b¨§™I†m¡#Õ0Šncí\ètÖŸÊtÎg[Œ•òüÏxQ2þÞ×oþ0÷ÈGy ¥ Dƒ8ôV¢ 4†#XãuψZw9S·é++õ[æD4‰ÌE€Nmq¢ÿ™ç”ôÈw¥Ÿð`dI‰ á¦×ô +óÑPÉuŒUê¾9> “²Öób‚ìÚnŠ}ú/”L{qú,äÔ¹ƒ°Î™™Ìi„ÃÛ"ÞÐõ—[ú©8ûi4¿Ÿ¿ -ìäFôJ¢Ç¾ÆÚ —²Kpà)ïÜáÃßšUüŸ e´ëüTˆ¼ü@ÅêCÉCû'sàœCäm4ÕPpuñ=öü©z?‰Hùf}Ùž¥L O á¾éˆçgJ|ºÖ ¤{V9§
›½ÙYG±S -45~C%ÑŒCVJ¬MiýM/]Y¤T~å'®H`ûüîvÁ¼Œû +å‡.ÅÖ—<lsà Pùû”Øq¦ÎŠ}“›Ð&f[ðò†ŠðyÔJä-8{{‡!ÀˆK¢¾wÿ”†Ä ȸLX0lÞZöæQ¿Gú Y…˥үŵÚsÁr…¶Íbª¸,Cs£ - þr¬3êw™ª‰Ñ{ºá©Ì0+ŽÉtB,¯x¿ãO6wÀ yÅ;ʼ®<&«Ò‹NÿÞ'Õ;.–'6ð ÓA¨a?Ê¡ö‚†Gúo=½=í¸ —k! AÿlÍ‚R²8þ~j=TÛñGCkZ_|üÜõ»^Ÿ#“»ÁåTY…GÛN€Äq”ÉB¸ñã'äÒžÔk‘š0.:û«™¯æ‚b'‰…ýeËDŽ9ÃßX?×&Gz;ð:§+^¶”<õJNywMáL %=ÚÖNê Ér: ëÒù7kƒºf*.P>ÇÇL4¯¶%ÉØR¥¹§³c%–ÕyBðus¦Æ¿_ .¡ïP«ì -DImçbT¡""¹F>›Çb›‚$>ÌNè†`nšª@å¢ñú7Â"4†‚P¢ ¬¬£Á¹5í“—Ü=p«<áð(Bà{Ä5ž´® ~#ÿsÉÔÕZu÷BôMüÔ˜º…mv<2ük~[âã'dU!ãu¨zV0N wÿŒUãh0ì4>ò)ñRjŒ¿~D‹ôÚzYCüFÖ -¹¾ùݵa §³øñšuM§ÒÜ×ø:b³+m®¬ -Oär›`vù¤ïrDVYrÏý®Fر TˆAн¶» -©¨°±sU¡³ëm%×qàOà™ atL§/ó(Ѽ…ã¨qGÞ\l åµ 4Y„ž…,3rC¥}=À2Ù£2 -kK¢ß· -LstzTz±'bŒ J™}ùø;o›W{ÝÐ9 þþI:™?*ÿ²,Fr•5¥”ãi`P“3óÉsªö͸¾ÛÂÉm•;±º¿ÕC†eâdLéÚò'w+Òæ4 œ¿œl ƒŒ%€÷Ãٽ쨿¾ý&ë4r-9›p¹àV'‡øû>JžZ\Üd—Àât)üOÿÍ8€W ¨ÙúÒ“©bBòI -‡id\ÀÀ)uìý»Æ÷8¨/‘›—ôDÿgpåþµ¬%9nY^¾ãôÇæÕe½0^<vÙeô}9)á´€„IÁ -éú•üKóWé;YÈ’Ÿ–_D¨’U–!ß Œ>j¹ùÊnåQo2û7Ÿ…b3tHWˆZüõ›ðñ¯Ôù“¸qw0)À} …Ãz4«¥›P´Ú)\„è1u1h^†j\—‘ï£DÐ WÅN"ÞÆ5Sï!(Pbmô\‘ˆc@¬ö†‚Ûf@JÖ)hòÏ€B!âØÛ›¾|:…$C¦ Ÿ2#,¿(ëë‰SA~½N€iݘ é—ß Ùe ¢Ò÷¨åŽÀ”F¹Î\¼Õ F ¢Þ»´ÿ”@½ÃçóÁ#Òqz.ô ¥Iêö3‰á¨Ê~âëp“ »Î¶!çqßÍ ½VŒÐ} 4õ° †Qï(£Ö ‡§×‡oªÂ*§á¿ytê(¨>vè©ûÿõ…FC-ÊæÒïuÞè¿È \»Ñ(Q¬ìèva߇Z^8ŸHÖA{÷@¯
äÿ_g¬ s»aÁpŠvœÛºÿ dñÙOKØ3ÄYüd•6fþþ¬ "¢v÷æœÞŽhÁ \xÝEEƒ¦iå¥ VŸ„MÎßgM{=ù ñÍu\ËOmy‰ÙK씡êfâÊéBõÿ«N -ëE¾YîVV¾¯àOi:dÑúë±Ö…ÖsŸEå'3 nŠ{÷ãf~—$gWÄ—A- ”º^ˆ³¸_°R¬>Z™·Ë·ú†<Ù…«¾eØ÷µH Ûžœ¶Ã¡ÑµáûI€¾ê@$Ú—ÙáݺMSL; 5O¨A$[Ü6ñÛ××Váãêé-Öªá[kD ‰ËÜl¯¡§ Ld;¹·>E®r ¨?íýz V“,‘8Ai ¾é.K
f–‰!ñ£V‡ÁDÀÁü í[+7hÜbT»Õ,‹ÑžjÅb‹„©·³ë^àÏ äiÈò(ç'ZpÀÑ @3ÑñH§†¡z#—<!Uü { Cm–®–b–T`+\ Àc] oHÙ -Íų)QíéÊ rz‹*£<{|ôH9c‰.ãÆ\¾¹ ª93~϶ø°Ù*£ÕJŽc)E9/VL,’7€ó%Ž:RyºG‚ Öü< ù5 È©îÇFAUW™ð €JL¯Îã†-wÈÀMã}ì{²ò\ÿ¾á/<¯¤üܦàRc ¹Zpë7=Qtë#oÿø„ -È»2Qò"%[;UÖÏXhe×—5ËÛ—AåB©ý¹ÍÁG£ÛÔ)N‹<¼”kèó²% ɇä p·ô¾r ªþ)_¾ôB >£rÁ"üp³é~<žd¿k•-PÜ”|c4¬j”\¿`1õäeð+ £Çå$^JTE3n8é Ñ#¬u -eUm‚X10yÐêfb†×°b*ÖãMÈ8F3öõÈõºú“Ñõð)ø·3,"4ì:&÷Y=£;užQedxBf÷‚¢Dêî#§R SÁÿ}™]…‘†H½jL]=R–ÚٹαKH‰e -ôÀIa™ïxñdz†å½nF¹´5%ÒYÜl¸å¨wõlÀÇëE·< ô¸H¨:eÚŸ3=¯XÛ¥º0Ó…st3Ú¢´ËŸ¢Ú*óà ÓaSüÚÙ]×my”µ’Ïé²{¨Ô}nm“` -Éß -*Ž4ÿ`Ïšxk¤©ÀVµÁ¶bô÷ÐaãÛÀ· ³±Ç‹šN Þ´_üRDVôªm]”ÛÌ} Ñ効b³N¬F6c™½£|ä{è ‰1=ºù˱ œÊxùyÇPVôŽ6\.› -Š+”»Bøô,Í0Ã6/¦dÔ¤*Â’> ‰ dµ÷õQÑu -'zW¹i^:1úÝrÆùâÁ4Þl^0‡: AƒË²› `à xãátT”ãÀlòMŠGÙ¿¬‘½ž×ûiSGºŸƒþ– ›î¤Ëœ2»íÔâ -®MÛCY)å:uk.ìh5侪^È3Ó#ô÷U€Ÿ -éš'±\.~Á%wÖ‡ÀµÜ¼Ðƒ©Õ>¢‹>ZBñ3ÏçIvHb·[ Ñà¨b«ûbV ï+é@ 0|µ©¯Èh&iéÍ{Ž&Ç(X9 žL½a ¡î|e(Á üÐHÚ™>mÿωzÅmFRSËÉö èHj×æŽJ+é’Ç(=ÑÍÛ¿¥¿áâ[¥¦?g·šˆŠ“’Èšh -ô?nã0te–†ß&¾yYë+5né - ¯CÒn¼ú|ßÜ1 B“Su(ß¡_ú¦£2€ž©µÅâc'Ńb—¿€ä§Û(ÙŒõôÏí)-ü2¼´Ý{,¼lþ«¡wBíV¯<;Ü@C( ûla'ÙæÉSµ½`ÿÈÚð¥ŽRhré2ÎŒOÃ^@rwèÛx"ïqûôª'¹X€^âÈòƒ _X‹ÅpÏÑw¬Ýï›SE¾{ÏŸŠMǣΕqºx{`BÄÞìø+nÞiw— ó>[¨µîudI-ŒÂ{ps’ µ½ iÊÜ„ð”@?£ÜF;þ;Á[#Ïå;†È²?-·ï:úIJ¡Ò4_Ô¯‡Æ×ë/3§È-—LrÃËD;]•± Bt²[PDq¡¨/£3*,Ú¢òDe ª8<ŸxÎårTŸ@wx‹/¿)úu ^úb;LÓŽFôõâÑÄH<%Öà .« €JεñZmÀo/éµ4·'Ѐú¼_]™ýwè1ù]XnËÕ V›Åö0uôèyãï´Ó oÍ>ݾ¼ Yˆ¹ï˜µ,‰LÙA³*_MëhÜøD6œ3uÕû -÷;ã|‰mê€r/P#‚™ÝÜGÊäËðN|;Yôq‹Vµ‡ûì±$_Ò -P†Ïü*Ðd»c]áUÌTôÿl:Jtãn߸ûDÐoq±dq˹p<Ç þØG1ØÀÉÿ Ìèe…*¤º;ò"ç/Ù&z5—Ùaš"ã#>G[x´V·þ¯Sþ5œ©½fè–JÐ#eTËÖ®þâ ¶*ªW¨½§ö©$^-böȧK{@/ª£÷s8T]†S¼7>‰”ÌŽ?1;¸ƒÌW¿T?Fã ZQÍ9ù ï+^à…±È%<ÏÚô__-}ÞSó -iØN@Ò•.“ÌÎØÄâ‰nbTºxá@.¦çQÑB?5›è?Š½T/ƒ`2T—`•ª«í'M"®:•K.É&‰vÑ¡}q
vãÕ@v6¿‹RŠÉPn2Ó﫸êA/¬ Ž¾^õ7Íqó¡²Ø^eÎ/†e¢üþãtÔÓßY5OP}-JeÖ*,Ó Q8÷ÍðWWiˆz³9@“êÖ.ŸÅu p*mI©ü’x;pJ³Wy/öÛ42¾S[âˆ8ÀÎ5S}΂/Äçfî±›ü#.üGïÞbBˆö;%ò -ÔtêƒñqáŸ"»†öwæÙú80Øà*g Ïûpw×y&Q¾7w‡Ì,\##“*ÿ·EµíÜ'sºÙT¨ùÐ0”!S@‡Ú"ÝL&$ÐÊUÂSzÊ ¼ zyuºxÄÇ› -y“þÅÀáŽáWY°QßÆ‹“]‘ÛNÂ@‚ù.¯™T ôˆ
sk¦\TMëòÙQ0| -JX®B€Üåã³xl’'xoZáò‘€P -ÜQ€ÈǨ&]@ÿÇL‹)cLa°ê“òƒ, -»µÆ¿–_ œ<› À•ö% ¤úZñÝñJ3šå0äu¨1Á5 ÙÇ· ¨oùiVŒH÷Ô"½Ý¿â™®)Š\Ì -‰éÃR8ƒ9fXSÓþ™^bÕØ{ˆÇŸ nŽ ×lÌ£W´öË…[Î7ôæ'Çæ‰çmoTô¢x .¾7`ø7KçÇ ßUiVXg»"4/eÄ’Z×Ãz"ª§ÒVЋ÷e»ñJ~ÕU$$ñÌÏb£Îûk‚Ð^œÒ}(52‡™0•ÖÞˆ6C^š_ @ ZÒc§¼$Û X°i'¼Üä¯SÖ(5”b¡Õ;M]Y猬)è@ù¾´Ž"§gÐ:ªã8Õà Qn„msḓ¦½ÅLj;;òà3¹1›ÌÎ ± Ä$ò#ÉŸ -[@‹2-ÿj-Ï×n¿[Ž,-]è6ш\ѹ!i}æÊwÕWB¾L¬ —*{u.3E›ž^kê† ÞªLdHolâK1¨Ð6#Ÿ,•Ý1®€#—®î1
{„ý Ô/•¨†Ÿ…’}¢m¤J¡!ß-m‡“"ëHa명48þ6Ðn` ñ ;GâùÜ€¡C
˜:bA¡"ß½ü[rà -»Èˆ,½Ây×}Î8_Êß–‹_õŒí{b™.—åÁ?Y7(‚^º?[ë>éºá¿ÅbXÝþIö|:#§îíHÓò=bRpPæTIG„ ”’{}ãq ãè >áOüǵ -v2¡-}„uv-QäÊ';EÍùŽ»€,k'O¯ü/þà=¬$ -s¹ŽK%[»ž`õСã]o¸‚9hÂ- ¬ÍSI‘o £ª3£X™29TÈÜhp ‘$òÉçjÐM¬£þð?š& n*5ÌÕ«J™vì êIƒmÆ&Ð[ßÍF“\ååiX©óÄT¶
ñJõ[;ן x–/=8³v§`g9×ñ'×€fo#œöê P<Û´@ÁócûÍü3 »*°ÿp‹žq -Ú´Azèe*Vʸ6.©ü@ldóˆ&½ß ÀGàRäVŸ¶[… ÓZWí5ÛÐöÉŸÕXøêÇõ «Låü5¦rn<3F¸ù…O§Ú ®UNݸyövŒ'I£1ÿسØز¿ð˜ÏN“-,ƒŸSÌ’v
|Â&ö`œŸ7.½°™j9,&Æs¯ »íÄ
Äî…gí¾9Hïmà–¦-ÒmYWŸZžôú`¢3ô7;Üo>Ts}"*(%gYÌ‚×çf0Ö -‘NÊ3)÷hÚ»ØÃ>Šný1D¶Ïޘ˓>µ'ã? rŸØ˜GÕÚÄcá”éü2fØ?wºqT>æ_f¬ñ¸¥[©f¼6À`ü1c§ãŸùþå¦é=mäI
‡„`§ÈÓ¦ÞvR¨ #ÈDú ž‚>¾Q\Ѭ#ë<ÕZ²Ê/£3̪¬‡Ø¾2gÔUìr¥BwR`t-H8¡ùrí2 »H&~` ôWû+Ÿn(…‘óŽ€ËìoÞÎÀ†¸OwïMyLkð¡ê‹Š§u±w~†GÑŠ7¼ÂF¥Vxþ³¡Ê -ùòs…«yc5÷ÃÄÓ‰…|ÕyÓ7_X\ˆ²Í4<1ÒÏÏ‹r·™ âöÔ\½dÖj;X¦äM&3žR;Yx>oÿ.âðºµÊ¦#;á¿çÞä"`²‚ß -i šp¿õSy¨ïìY6 -DZÍûfv‡ë@yÍeM( lsªù1³Õ¶öá9¦ðšPy®µSÑçÊw9ÑyÒÑÈTæ3?gP’ìU9ŒÍq©Y]"f]Æ[çMÖ \5`ÄR8î–Äï
é«åZL~+ÂVΊ©b/Êx(½~_ðËøJw@)L˜ØT úôï#šaEÕp˜Y˜mÓÂå]v,h{FOºuºá¯ 9SÙ‰ ¯9 7Rä駶k¬Ë•E©ƒ×V¸Ž>y«øÃpê3Åú+=m >FÍBïÈcÙ°òŽƒòxÙ=GFhóŸQÖïiVù¥b }Ý•öØè[y Úõ' …À -½›Y|I!#ûÞ:‚ˆm4Ÿ–.3óµ½± 9x* å<(^ â?ËiPFôždjq „ھ؃_3!Ýkϛ縴ÛOÅ -rßµ`IÎåȸKŒZ……$iõr -Àx fd -äï5pÛI‡,vÉ.n*ª¹¡¬8Uu4ü:ÂvSg¡‰!”‘‚€¦Rö -d7w *˜zJÉc§[;3zQ螶9Ï»5spP¢á&ÐÜÈÌ9|±å—¿óІº{¥FÌÓÆ=Y¾Õ½å$ìW^¼,«Ä¹È¾˜îµfåÖv L=>·S*á”o>?ïS‹ ¦ZìƒTéMYVj Ô§“|ùÁ{ðÃë#¿oº¢?ü#` ðm=¨Ž ÖŸb!(dÊß‹Bù²¦—·î6¿ ˆMÐ%–?ðî™*ëù×zçxq¶l\!)ÏNB+Ï<¦sãuEg$Oc÷%5ÀíÿdÉdb -…Þ8`!©/8cÑULÂx;ä
ÍEÀØ®‰<þ†_5ø—uyêwaä > wÚ¤^ʵksAÍ>åÛ#(X”yc}ÛmY
Ÿ - s±Ïø{Êz8 HøkT j$ELçr8\gü¦DOc’¡ •ÏW -ÓUw’„ - «¯¢7²^ΗI™Ýʶþf†¤uì6…uÉæ4ì0§ôÏÓkœäsãèÏ2é¦7BA:?Lz_¼¹‡¹¢»(ɶËE·\©êÕÕ{Ôõ+~¹†í« 0ßT{Gf=£Ž\ôÅì rËÎ|WN¸-+2Š‚ÕøÛúh³EV[õât¿+Î?@yŒáîYÔ0ÚËœ.¨MŠÐ¡¨ŒnƒŠèóœG‘–Mb¤½J¸
¿±²î”·ïmÚí=¥?=XŽcéÀÖ:§SS{—ú§J‰âÅi¬ä±ŠŒsé-‹ž¸ì@€Õ6ÐÂÄ žGoØ,œò½îÀȳ®Û Úé°êŠO/ÆÔ½5â1RK4Õ¢³Á檊Œ!ÐÀXQQ//êîäO´æ.åv¡øçv*Óž+ßv)¤N£žn©å -¸½Ãï\Рך)É×U³bQYä \ †Í½ï#?"…ÂšÑ ¾£¢èlh¿gV¼°ZqÁÅ£ôÖ9Í8ÁjÔDzÈí¨Ü -謻‘ªGð#%°Ë«åÏšå@çS=kwJÄÚJT+ÕiHµ í ¦¯uaÝ€8âg U¥²§YEÛ°ÑeÀ´B²$ш|ðYƬ#Ø_ŸÓÁŽl*†*df=jwè×tõPÁ¨ š|,·ïÔ”¿\@îpyÂÄlè·=¤(†é7‰Ç:#®%BÃeÕ#¼9Te9ùBOÞgŨq½ð86 «¬ºõtú\¶ A ï½ábÉ“¸eD¡|#H9>©_V2Jñ,æ§_ÚïNëo"xÿ=|A<sã=ò tÄëŸÆËaæs®´ëªÎ¤®˜ÜžêKśŃ¨.'§Rìç°/½¡Êh¿f>SK òî¾2,þå ™{ /š)ZèyÏGçéhÁ jó<§ H¿sñiŒ7ÒfatÎÂÛ..ñ<\ýHuá–Êì-x©Ä0¯àÐÚà¿i'wXbq`ƒüϵM"Éôƒâh¸v/çGÇ[–ûgª{ê ìQ¦·ŸL–Åœ ˜Tû’â®Ô`@oz¢ 9j|¼5“Š«TR-ß ˆ1±5.“«H›M œ¢8¯dœ>Zè!‡: 1å+/Õö~/G£“³¦<J³¢Œ<N¥
-Gÿý°%±a¾éç -{¤½Jë¥0Õ–2w›=ßMhþ×ÆQëîüÈ<üð7Ž¹ /%#ëþÌÞ]Ѳo*hFûòT= -¥{{®þcƱM-¼BSßþ“!ÿâÌ•nž¼æDÙ*N*~¹=Ú!•f!š†èž:kE3 º¨ž™PÓŽú(²¤)âb\ópГðžËv^rD~5û†1m/š‰ˆìV6x)éÕ“[â3Äiƒº+ã9}ws-̇ѹg)¾´£ ¶Sé@K -û}LR …¹• Ûñ Ô{BÔ^åGƒÁ(ëÕC¿ S×ÏÃCºùèCRóÊ/µÐk8çÃ$¶~KúÞÍB6×@øÄZ‹ƒUŽ1ÏÚVïXÑ‚˜Í‘µ¬UÇAÔD@‡T±qC ôÿ ¸hUoÚø««$ešž¶ Lõ£ïw]+y„íß…IvéP”Õƒú!‚¬0ÿùö´Tµx0V––lSj A©¸ù¼wËÃËÞþ -ñBŠ°–ëÛ«zN´¸xmµWu¦‘üÁ ëƒA)ò#£‰¨÷„ïÉ>»ÖÞ‰æH+ мU¸C3gÈügñs{œîöbü%‹ø‘’çžÄßü,XJH`ªƒÿxR¶>¾(C0”P—ZÊw‰ÀTLóÚÆ5ÿ_ âetôCˆ§‹ÍŽÃÀVð]¡&8ÒwÞûW4=Ü"øa·ö/ÚVâ¶ahT§ÁË“@ä÷)õi–2áXØ •õ*Îâ÷ÕH5°ÊՅΩRþ*tF)}FâC•ð1W«WOÞ cÍDˆ!uqWWHÞW+é¸p,¢êùu'Twñº5ãÉ•áÇeÁåÙßï¢.Y™;ícÉ5ûËI×î¾ýô&£Ë…Sž`Iï”@C-znñˆqöª»²þÚ«xªòy¿ðó·`Ãäó- gì[ÇÆÏ I©±ôõmwöʼnÛ'UÓÚ~ùDìÎǦ’n,]îÀFIþ{(§.þBtîÔd~”ÊÖ3>Ê릡,¸”ÌF±¦X ì¡Ï;Í<ïáh) 7OU·°ÑZ+•žÊPí}Ànï”;üi<ß3ZÎSÆ ÌÁ¸ Ѳ
ûKaŽÞgqBÁ ¯;± 3šv%1Êçâeæô šü(˜r0›, ü%ÎAyFî.óAÉþ%% KPRÚþ/…¾? ~ˆ .ŽÛxÉ%ØXÞJ¹1á$ØnÍm#1‚†ŽvqËÔ+C¹·y³Èj€J¶ TáµpðŽ…Ø»ÿ»@Âs8û°…=Þ㇗þú:‚ -:ià¡slB÷5ÊÂøMљޣ°ž§YM"S¾;œ.6ºfœmùGÿÃÞ -æP~8ü -ˆuáäa–—°ô%ÈÅr œ„Gnèü…Íòë’‘nG§E5Tø”þ&‘Ëg†úDß"‰¸°×ÊéêɇA7Ö‡ ÷€‚™N «9‹¬â¾–HŠvh„¾„Œö8ݱ2²ﻀ":¸¼äΞéª,”¸ÐÜ’û»6Y&¯¡Fyq?'ã|ŠÔ“Ï <¡0d £™Q RÀ®/h´³vzHI´Ìd€Ø™Z©+³fzìÖà J¶qN§Ì ð1N¾u„¤<w§|mßD¶Ó;Õ{oL;Ù$‰ù3 -–¶É¦ “só„nZ’uÞÐu^Í C¶MY#~}ʯ1@$'?;sÖz( Õ;´ñŸ‘ h]!Á‰]s°/CÑâÆä-Ì -Í#ý, x4ê{ -¦Rñ¢Y2ÑÛPzp ðgûD‡óÌd¢‚‘ÿu½tãè)ÎÔ¬2 -c*Ôí;‘sEÂ1c×ÿ ÷Œ…|4v:Ì@üz‹'±$»À”> Ÿ‰D ÛY¹ßõpJjjmÖü& -þEc˜ˆúý¤U|¿³TîmÙ{°xR‡'®áRBVÁTïMï‹uÍâ»Òº[®F{ª¸o#«éÛVš8ÎÛĵ€•o! ¥©ï£Ž8—ª£bb¶r®©DÆ&â„‘¤èO²ÄõÍ4`³£*·æKeGó'5ãÊ*V\"ÄÐÚ¡'5(mJ]Š§DC„d¹@ âæm¦â§J$hô÷Œ•Ó¸Ä¶Ê²ž}Oz£ñ®6ç¶PŠm¥æíÆ œ*ñVË[ÔÀªP ÿ÷N."÷‹4x¿j/ÎÀ‡Ÿ¶ëòc ƒxÂ[¹’饀õu -Zc’[¦¡gb‰_î ›’¨Ä=@ê‚€7E+/æ~ûD›£·øŸ ȳØ'š¶ -Æ‚:]áè†4¤FèN¢ -©K¸¨ ¿¥1— ·;×– ¾¼R˜E €ÊOôÐÔì ¥Ù¦:ücb˜’÷{ F;@aH&¯€þÿ~¦èŽ2a¿éº°téP©mÄ!nƒÜû¿nvÏfŒÀòP᳤û[2ŸBˆ×(WU=Lõ!Oþµg"Mê üíßJŸaêW¸œ‘ô ¹|¨‘¼´,‘`À\>ˆ™ïax’” «}ÛÉoúÑ6Ä_r¨\ÞZò=öýÛSóZè"|é›v&t.C*~>%p¥iº"†‚zòz?ÁM;ʤ¤¢%8jN.È¢ƒöêß:hÓr…©N[ Ú ú·Þ g¹Q à»uw~»Öp:½F‘쟔T8ÓJäóÜ}´§«ˆÖ2*Ó ½‹k¦Ù ‡A€™lö%ZzäUn/'`†„Íri0ùÉßFgVQ Ÿ ’”1Ÿ£‘ÃÖÔvソÝÅÇJ %-º,;È1ÏÆ2§–Xó‰(Ðñmó.?)U2³¤¡+ý| -˜\7T 'Ûí(I¿]WìµSim:ã€mDe–8×ÖALÑë¹â:4¹›ú}H•/‰±áŠ¾¶6ƒ‚öX èÿŒh¤?ÇVÆб+W s:š´1zDN”„ hB( ìXFÕ&ñ®X¡ÀkçDQ€ -öbzxt#g¿¸"
D¤UC üÃUs¦9©£kúÛð“Ù6:÷É iÖ6HaQZ)UQ\7„B;Éb%gÎBªKŒ ²;š.—ç"ö»ðûHíT§b, ªÀ×ÄçhœŠZÃ*sãX݆}×øQïôÀ¯±®PHw¬x„r5ˆß›½!ûKÞÎk£•GÛ À¤fÏOœ•Û€AÞ€‚M}×Ù]Î9Ìèhù„·ç \Ÿ^ýÊqË—àÈTSt4˜¼i -úã6°*7Ä þÛ™‘N.W Þ )S„,”ŒÎà¿D‘Aõã²nÒg ŒT:ÜêéÇ -.]úªSüÜ~ô+Lž ²òˆc6rÞDÈ ãÝ ?:½UÆùÔEã¸Wþ’Iª[å)Îó~£œ6G7$ˆ¹4ŒÛâˆQ%³9!£¢Mg3c»@Lô·³õ˜UÁ…û:ÙC -S‘. ™Bç;ëÿKŠ%sóR‡{ë¹æ ËÔé6FvÏ©Gßð¼ãìù2eoãu ‹»A%Oï›Ä]’´¼€9çäLC®É‘ïÂ\*×)C¼’ÌN¼ëe#ú|ŒÐBd‰PÖ+nÓÈÊoöe¹Ù’l%õrŠÊ”äg´õ£—»t$xPs3g’}¯šÀ·(¿'qƒ9èÖ ¿COÉT¿©ðFwUº¯s½]b ùz9é1XØm%ûNÁÏÈã…¹A(Ž eÓz{ Yy@ïêF×%7·WØЋ»¹whñ~𽯠-4 |¡m÷>š«èŠçÊ¿°»{í³þ´²£í^Yóbßdb“zA6óÜyß*r0ì\¸Š¥Œž9(ܻ엜$gܶôè¹ ‡ŸèªÈyŽîÓª®µ„vÿSë’ˆ4šiɇ6ù{psv7”B¸+«—_ÄAà
ÎyƒnW5L t—?zfV!ûlN‡€á`v˜”²W¡’¡ÛÓ¤úùø Ì°e8úÉÝÑgÌ’êrì ´¾ë¢Àn·F¨§ãá†*´i:Ežûê艃ö3jò«Â¡”‡(F—JÑÞPçì>Yìʯ’àÓñA£q-µ¹ ¡ Χèët%ÛéŸ" ´d;ëú?0 Êê â5Öqo£”Ák úŒ"ãoÈW³Æ[DBȾ°|[ÐÓm:ümz-œ\œKÃào‹]‚¢³†bå˜=Õñ”ÍÈG‰XºM§ûˆcf¸ƒŠ¡w(W ¦Œƒ«w>,ß´ŠÈÐOb1c®”Sšj¤vH•”X&¶ ñàdÿqzÏe ³«wVÚÎêƒ×-ºG÷/Kÿc -/oãæI%s!C»ÔüM®îDÚ¿ ›â玆H«?Ñ1ûúÖ‡qÊ -A_Ú‚º€Ç v³¤-Ä k ¨ »ºR«Þñã²<«!}]Bß%ÖJ|ÚgkîØrJ¹]xý–\$e•91ÝÓ£&ÚÄ.¬-R˜ãäéxúoU?³óû -“UÑ:RQyFÎB ƒd]œét,_§<aGÃ*!r[ºW¨Fº0üê§.êév9ö'ðûïø*`q\ÏòP"R°FÂجk´ƒc‰— -§ÅÍÅPò£0ΑßìÎ0·Ì—¯ÃB–ô—) vÏ„v1ópA‘2üŽ(‰ú.u¬ Ââþ¿¾VäCñÿQŽ¨uV‹¦b!2tÏA¼3-Xè`c‡ÙÒ<° -ô0FªÆh0 À¢n7žýÌ=Dù‘ Ôƒ’1†§k9”Ù€i`Y÷Ð1c<ø–æ ƶ¥Æ!9ólÆXðŽyÛãXAh§ -tŠ_Á¼Ý_ÿDÂ"»ï¼·çÚ±.:§-ª{6Þ¡«;?Rä®
F¹Èg r+-õ¬Kô¾P™ž‰ž¢CÏiIº¼õ- J~Ù¡ ~b›ŸxLj¯%á{GõÅ ç† §½;M³p†Ld#2ÌRú‘;;«xr`2w+GŠ›WÚñЕ¹í)OÖº¡{ÌÚ£ /ó)þ톨¼[ˆõÖcÄ2}ž' ¾.JŠm}ç„_ö¼ BS,:.ì¼÷%”Í·Œ¶bDué0 ¶òsH˜@E£Ká Î4Ò[‡Ê‘Æ…!¦hÝ|b*yõUö[± w
ºë§V|¯ýÒ½Ô¬N™ƒÞΦôFÙÅ<!X/z™) p³"=¤*ŠîxŒªØ–qãKs¡0Ë/ HT% H“½•ti—ª9êð,‹_»ÞèQh¸q†ÜÒ/M´A’
W˜â½$¨=W1-ï_RËd•²L‡ ŽÉTuä[ßaÍš:MJ -ù@ƒ WQy9Ž°)ê”Îkb é$þ 8¦¯žoÊ–ŠÌj–®Q -T3>#M5ùÊ’¤{¢ÂÛܤQL› [—I¥Îw\ƒuaè"\—n#'8•³‘P{¾ü¦å<»ßA*Ûè–B¦\-œ, Þ Ho‚Ç!Ôè Œ>õkÖJ¥¯ .° -\o¶N Ÿ7&çîñbWÚ©1L º#æ©f?Tój0e¿×ÿ¡UAÿ>p×øâÓ¹6ö³È§eŒ Ðü;¶ó‰Iñ¹0ðÑê¦}ç¯lÈTŽð׃Lÿ~*Q ÞægÕŒ$ˆ¥D.ßþ£i .¾)sSV»'ä½¦ë ¾¦ -H éN㇦òðGg^¶®çYŠäc478ÁX“D¢tew*6'\àú3"Î@Í:jÛÉ6ûµrAPh¼P .ªß¥QØÁ\W„ >†j
È”?Õéä½û?Þäå9¼Ò3ðtöÕB»¿´„ †¹i‚WÎØÎ cÛçÎø˜ñ©¼•ÛnÝ•2ðM€'úˆZüò F˜…OÖ¤Y– Ä„j<_34úû3†ˆÑ;E…F"ä:}¦œ=ƒ\^:_/kÑöc:G†ªPÎvÃv QûJ³N3Ø·êå7˜ )]1Û½Š<“{¤ô§ÍkZV•‡„ü¶@©}@¾Ý ¨x.hº—ò™™ü„¸BíÚØH¶^h1‡7Ñéc>ÆÕFGSK¦Ÿ§Ü«¹1w[Ì -Ñh&@ Ãý‹ dÔ©K^4®:!‡ƒ>‹)ürPRní’¹|…P´UCÔðPñh0Ž’ ¿¾„x¤ú•|ÑjªóŸW‹„G`!&û»·3 -&§fÏÈå -Y°ïZC›\<Ì:Z uÔ ?ú‚æIB Œñò_LTŽVü¹ -,(Ô‰?Éö.âŽÞtã*²+ -±ÕÝE3òk¬³I‹Ê¿\Ò‚†:`ñó_ÊÁ:˜êÑK»ûîn8»RwÀ. YêNê Áž}ªdµ{a±2ûDæ;óŠöbRüñ1}P룆 -èã,°†ÉÎ÷ a¯H³Ðò™© GÕú åõ\ì“PHÍÝQWc]é9Ö'?m §î\i·íÀ—b¨AæÙ¼Û¸<Gó„–†6BÁö5#˜”ê¿ÄjÄ -zúÇ@LÖæˆÒ\[–¬¢ îŸK÷qsÕUãoáQMÜ›ì.Rþ“(ô^.£3†ŠD'–&{Ó¾3/‡Aú/ ˆÁ|‹:»ÌöÕmo·©¦ðsï+Y]dAþúXu¹W4UŸ¥ÌàüR«¶ ïic žÚ€Šm<º2}š.VIô±vƒÂ’D1žÏÚŽÐrÿò¸ïš Å¡Î5C7$+JÕÄÝR"Sdg÷u~DDÚn,µÉS2ŒR«
¸ ¬ËîA¯hyBbŸp¹Í ”ý{ºò83ø¹*üETnŒ>Ý`#ï`”(üín‚ ¿=÷t;X)íâ þB±U~{Y¯§¸ÏÒ:¨ Rtd¹t"rŒ -2áòx+ÀÈó–ªä»Æ‹ óÑjnFžcHgSæm¬tÑÁ< n³–"»</Î -‰<×íƦj!°r`!"‚)QK»¡ŒGò€HÏWØšÄT–ÿt¹òqT¼!G¶ÈÄ<CÁ+BêÔ):!Ô Z¾ço^ïŠÃâgÎÆJCGY ynÿåé µXuKšê8E-²ß5N¶Ý4¶eÇ©-Д¨Æ¿lt·äªç(Nsõv—©Â¨åhf¯…†Ó/f :.XÂl\W‡J÷eTF^ªÀ / ¾z¯ÛÎ{ ža~é0æû›8@fìð~¢Ö”A” •Ù#¤Øv%k5Æ0©t -• ·Ç×*q–a/ ÒAA-tˆ7ÐØ™Q†„5˜æÍÊ;GŒî÷<Õ›êF2g·yZR)Ã<ƒh–‰‰œo›» ³ôhÄ#FZÈÃðKË
%OëwÝgʼn8ÖÖïí1€'ð˜ !Ðc€/wh#g4>"õ*ÝUúATýWGÁ’$á-ë‘h8 H·Ì»¨Ã¯ê.nªzN™ V <uõoêž äO‘©VÓKm;gè3ÔIA"iÖ¢Ö@EçsN½ì½äl./B¿Ñ&$pêS·ò7 Gή‡;;Ë ohàdß -ëø-¼OÞç(‡X6ò”4(ì ä§}ªÈ6± j3StÝYN¬.8åË´‚7x|ßm8;XäÅZˆÁKëvƒ®º°¬–ç¿a~M- nXÍ'7cV ‘__1uˆ‡óúî\N–\?Zù$ ¸Ô“]¾?†ñÊá ÒU” ˆé&-]ªü -'íCŽÏì¨QE}öÇþ‹}Ùh“rP‡ ÛýïU›Ý‡ü»ºs±•c/;ÇŒàlOØøežéõjd„4S ÝM[Y¢”cÅ,»
£)£aéwå>ù¶;N(dËWØ,ÚI¾› Ô&=lžö½5åHCXúZê¨ÙÌgðO»yÂOH=ð®(‹ ö¼ºX`œ´»ÝÉ ¬Ï·GrÉÞÙg-òøØÍÅ û]/ŽÉ½?öÕmõiž^V r]ÍÀ¼ ãNA˜jMºËýT¿tÚM9é -M£ªX§hmÑï¿| ÷³"WjÁ -@NÁØL>Ž¡T=Ä-5Ààò´Ú#ÐæĤt4è´Ü¯‘5/¯ö%z3„aáøÿh 0 ý\@&‰Uº6WÊÛ:¯£ÑJh+ŒhŸÊ}/Þøe– )SóþqÉ¿ÛJm%ÎB}É5&Qƒ²çaYˆXûr™Êv÷÷jØ.3@]r;Š=ÝѸâUëºòû²^™|œ^ÀŒC¡R@q¬ôaCæs¼E(É®n¶Ð«ëe¾5²>„‡ï†|w–e=8fÕàSC¡¥#ç ðXB]³$º.s…áYí weÐ8•=.¢v›.Û%‰•ˆþÝÔ>=ç·4ùRBQÞø=©7mî_iIÓû³¶ñ4·Úî 4ånÎEA´Á8‚°½Af:•ìU…ï_, -ð©w5"ÛB(«ß`¬#GÚôœU+ÿ=€© ²4NáN|ºl#o "LæxE:žŽÿ©v{§:O©à9?Ô;”ì¿¿C’â*KC Ù$ÚJRksCÑ8WO„ÚÊåð“…®MžZr¤½¿N2cM»Ów¤«Å‚‹[~À¯´v÷G·;.N£ --¸¢“v«ŒQí'F‚p -”Ú%úq™ -/âö-VÅ‹¦#q~Nˆ¹±î"²Õñ -2~xZ>·Ž/_/}˜*$³ -]YÒìYËÇ-4%'{w£’#{™CïzÃçh™`O \EäþŽ ®^È'IòQ\{\zº¹à[ë&ÀÒDU -j¡½}§„Ïþ Ç Ô§4òX8šLÜ^ŸæÕŽ3Å€cÿHÓ›µñömC!c$?¬ãɱ´oÅÒ.²D÷®ÈŠ_fï˜áWÌfŒ4s~ƒÆŒwÞºÌ5‰ÿ¯˜÷xù¨"\£ G-u…ÝE -Æ»ûŽ, ~\Õ:ŽÍ™§m•Õ‰CgX]eq“ò“«ÎÔ'wh÷¼\ÍÄúKµmÉwó°åÎúYœÉÖw5ñˆ:º¼ðJjDÉ»ä¶=&e“†œ÷m²¥ú6@ föŒ½íí8îëÙj \ ŒÞ1’ÝOˤVÒm“žÌ 03§ºBF5½HtÊG[Ÿk"ÏoÖã"ÉmÙE£•ÈŒ€PÝe%Y’V£f†øöDÞG«y÷Ãzb9=N1°²¡ æP€DÙ°b[Þ$~w^8 Pj'‘`ÛòLâ -IEöTt{ðáò{Nh‘zYí-^»¬¤˜WrÛŸ‡ï¯ùöÉ'Píñ—‡OFG -hçîòØǾv¢xr&<g¾â‚¼ê“§µ^¸eS¢¥‰ÏF$Z[|ÈÍ7Qt& "Xà7!…àí2|÷,°(edSÙ÷#C× ¼³yâmùŽiþ²
«•cM™[¦@·ì¾6)NIñ·+4õ›ô ¹}‚wÿúüM•æ§ñõ²‘ñ -'2E¨ö®r --¹úti¾‹¥0¯£œ©ê…8J²`?Q—l“»#$¦2UéV vðÌBªçÏ-KžÏÚ¾ @Æ»Þ%àäàU|]ä6þàj>ãÁ‡kÊ #¶ÑÏD÷éw¼$²ñiÆçñmá¨éô!ŒâÒ+
ç§äGO~v°óFùËŽäZ¿}Æѵeª«~Ý^]‹HüF.ÒÚ¢?hþüìÇ&™¹p& -bêk -€öXžôI¾8ƒ1â ^TXOâ/Ôšö…0ÑÚ»çóé<iZL>«{oë¡šz: Ê äœ -=aƵÿ—‹MÃè—½×íÆûÀéô›ëÉ•¦
z+´j¢ 5S
—"8´qa{f.õB4ÕmnGr[ñ’ÑF\àÂ;=g÷k¼vÌþ¨˜ÀzÉD£ð_¨øwî~( M}« -:c^Ìü<Œ>è ”wÞ¢WAAo÷ýa¨¤`ÜœD„Ÿ·zZr”mL ^h j‹ZFBBÔ‚û´%,ZØ)$'¯°ºhØžLæ9V'u_R{Q,Íö×¾— «êŠöˆ¥Ûü|L–Ñ®^îöü€žè>ÐÎäÁ¨,O-;:u¤ç . éÓP0Þ\&eÞžQ]w ®ÞÆÝÄT¦'¥Hô½úåî§÷ÓÎD—qFvÇ[¿ê]üôAÜ'àC*ú¥o< ó÷n 9¯Òl> ' %XÂ`÷“0í -›1,&›Ó
$v=!6BüƒJù¡O‹rø -"ÜaÇM†»u¯!@yk¶ äÈŠ‡Ó³‰ Nò5¯¬0©ØÙ0îhúݵÂ&žœ—[ôR -ˆ² ©`¥»,¡ç¸kËžÌ@qFNد:׌ë‡p†^^dñ'0þ Tnqý ÝÛ Z²Ö `*/ Õl¤ÉªÚgÏl -«À ªñ^â›s¯=÷VyÅ#ž=
:ØÞñnŸœØ˜²9wCÙNm¿Ô§]
xÊòÛ7¾Z` ¬t‰¸H}ökV£Kð 7ýå9Xh”á g=~GszîäÉâ!54#z¦SØôoåàŸ&M$w— µéžÆ´Ö9 ‹C>`{6%ã¼PœjyD?0Ðw-ñ<JRÖþVmÒqoRLÂûÝOÁq EÊéw³™)•X™„œ–ûÆßIŠÓ¼=Â{*#‘ -Ã:éô\¹Ž §©€â‚8{ñ>£
á2ÉÆ6{ÒÁ+ „ã>9 -l1øÍöØ!µôY{‹£@vÏ…ógGÈ=ž§Pí¦ƒ^™ô Ïúˆû¿øú`úxá-nØÈéVM7=‡»Îœ|S¹¦Ö 0²5ƒJN0Ò¹ä=ju"ÏÁÙG*r`pÄ‚~2ð üQ§÷ 7б¡(ŸNÀ r41rô@æe*æbšÞîìÖàí%3&9wÅ)Ä7±~¶e‘b Î&'å'ôF²?÷Çþ
ìŽ ëB¼=~¼>ç°!/šqÔ¸“º“†a'¯ï÷z ŒÌÏ’Õl' -ÂÙ¿Û%pW8¬y¹ëd¼U‡ô—×t¼CÅ }¡3=#dvw<ĈIÛð†'v½ž·à <ô³dÖ‡ t’tŸ}l¹^ô6|Äíkü9ÏÐQÑ ü´,@g Gvƒõð] Æ‘Ióûò_X*¯M{¾ô{–©ü}Õ PáÍâö¤qÄ“iÙ NzÂ÷]6œ?æ)ÁÿÖ¾¢p~Ý?Ê_ËÓÈ Õ -hÍD…™öFá;úo~ª±“é¶ñ^F©Ú_éH¿Á¸J_Mkgváö ïµíšÃ$!/Ï'ÇôW^/1¾/ûÙBD£„—=õ½ß´Ê÷ï@iÕË)|Â5: ÈÊVØ.Àš^0®ÿÇ#À(QŽœt»å¹) às„þd¬hɛнçM˜Êµï$Bk¢-þw¼ò<U‚éú ”ù”¨ÙºákW0÷y.üë`“ó#úM -ï—hz‘Nת“Ð…Ø?©u‰û¢KN!j1O[üöãEó O¾S´¹Ó¸P\ü³XW)Ev,å¯ï—Gv°îu¨! BN x*θN ”þê PèNû2V›ÿ*K!øäsj®ä8ä/ =,aÛµ`À¯mÊú-Ý,åÈa i,Ø©¼ø[¢IŠ¯öak¢¸ÚuœýŠí<ÕJ# ÖkÌȳÀ[D<ä)‚YýeN:‰¸²:§;¾mRÏtÈy3Û$ïó–‹Œü -±¥ÈÉï³YEÌ06÷‚òC0¥†dEvÁ:ÂL@(bŽ¡ôƒ‹Daô;^vÜE8'(iZ!(¶®ËÍ;A;ó¯y -Ô+FzcçX<î+Ë ã^OBØi&¡|!4îERZ²¨ É vðSÓP%ΚÈ0ºýã1V`°Í¼‹!òòhjœø_‰ë²ú¦]E%OöØ6jò«àR+a’R -H0›y_•,Z¨¹Ž³u -´| pÇo]h—o:)5WŽ„W´[U I|“Çhÿ¶x+Ì}
ÓYýÒ Ž:ŸyØäõ¦…÷åO˜Šâ¬‡ó[ S]>cîHÙðñÒñNbþ,„V¶OÑÞƒßæ·ã›æÁæ¢ÐŠl .§°ËÎMåˆc|·h ¸ŽýÝßôdQ¼_.q±VlN¨ŠŸ[éç4{»^V÷©dý¿ÍxLJ$ç ¥D… „¯Ø ÷°#ça—ëÑ< …hˆôfÁ]? €EáJ‚òf…Ÿ«¢ü ¬9!ôËîÁ¿d8È 7¶€å\ó;ã#NA$Ïz¯dC ¬ÕãæöD4`@ƒQ¼þ2Ô·ªÏ+… |Ž|î÷ÞæLª‚5néâ@É&vK)ᙄýç ö³n$y͆EæÃþl—/ ->ÈN¦>á–pUŒLŒçî pè ïüƒàyý‹ -R«'Ó.ž(±þN óÊa¬ÝËëÕq®N¦p;r·
A®ˆe:åõf+U]öéj·ábE¯?´‹z×ÎgV -v’5ÅÉI±Ù0ÿõ¿ÒB•&·5›^ÑY݇‹¸È)67Ã,”]V¤´¿¯ aدóB&‘yyS}¿L®¤0¬µêò4w‰52ý*È©žé±ÂÈ{ÛEÙƒ;—86iÔ
r=jïñ|²¿¨¸éòög£øa’ -ì8 …¯‡õé -¤ÀÙ'\ˆ&=OœÅ䦅…¬©8ŒÒNiÓÃi¡)Upê$ž$x.} J <§Z”t‰¥Ì{mLµ¹•AÈBKéÈHa§@VËA)³b}^^í´Tp²$"QFáÜ0 …²V±~ÒÂÅÉ6Ó*aï`
¡ðKRœäòƒLÝ,m¼rgÿ«ó0/RÃ:2pXÐÖOªÔ7?7èõ‰}ÞÍ -»G²¸¹PSŽ|ƒŒŽ¿e †hÁ}3Uø‘Pa‘‰iÜå¨ÓÍ–wC†BÛÂûB?5åß®¾ã~ ¡t2… iT {fKè1i/©Ô
ÙÞ Ë\¢ž’—:ƒ9lõT+
Ùt±t3+\?»2¦œðR"ô‹’@@úô -KÒ' ׸-/G -Õ'.lâ5Xc5uÞòœ¯Zéxå€ü0A¨®MÓÿ -ù\¿,Ù€Œ‰“J9CöWù,{u~ÁÙ`ÁntiˆÝ̬'-:H¤CUm»Øéô¦´¿èlÓÑb|÷u÷¹.)ƒðN3 - ç¹ -$à -ï<æbX¦”K†êô*^Å·ðI¸}äçªQG±Œ¬™!ûhÉ`ÅÅ @ wÔh -û¼ƒwb -ÃuûMGÀ£ÅƒQ]çÛv»Ì¡-ÛÁÂÚ¥ 냧›¼§ »öæòa9Q¾«tö°Fßn·*ï q¨À`²#˜ ¯ic{|u/Žô0Øè1 ‡â›Õde¹×Rxy4-œ"â¢ÌG߃ÿ•ˆgœª£c…€—3ìLœ[ü˜äœA˜8æìâ·Óƒ$»;ÖPGŒ$앇¯·-¡)àЛ̡AŒ¬^[¨;*&çÚ|=]v¦F'‰GZª¢ðÍ~‘‹ µˆ(Y/Ýž¦¹€h©DŠþãÃAW{¦¥¾Á×ö-‚¾ÝäJÕKàêo¿}$5ÓK°«î'MKèY!}=Üý«±K -Ê6A¼.tùö®O–$Ú&&ò2m„Ì`ÍúÿÔ9L€` ›#‘1B"D¹X9°VFÑÜQóÃôAaשOu‘¢ÐÍÍçìœä†„¥ˆ»¶iÅÐÞ$4B÷öƒBÞáØÕ@'äƒA‹²¯OjËU?ϾҪz㶓fW£äÃÄìŽ OîÏQ/Ñ&»Lñ“ù8p¥·CbÆþJÔê“Ðô„;sŸÿ?î™M§âém<“Xšp€:{¦[&0oÀNþ¹tïõ¶Ò·£`dYÓ+’ Éö®Æ»ëÚæ–F5%¶š“O©z3IWáB0N¡¹@ÜQ ‹¬Ú€(Í™`*Åc
úÄk4Ui³À ¦Yæi¬TâŸ<ןÉêÖulò¦.q5ò˜0_øÓê{ÞZa0–a¹çM•½´ñ vax誚t®ÚÒ²Ù tD &R#úÈý«v!° Ýóž«ê®ã1GéÅÈõ®k!=/~}ŒiÆ÷T' ç-Ø·®5Fû-ïà †ÃFU^5Á" µÿ%{†E!ÓH¢Ï J§ -2/6ÛŒ{Z4Q³+•)÷Âõó̇©½s]?.Hâ\ïŒìÁü60Ü·-·C\1˜?þù$f 8:vbF§Ý~]˜KΟIAÈÏÕ7È„¨êát=²jç‰H-ëvZ s®_8é ±má_p@öÝ+ó{“vܤMØ$
©0Í<àyÞí…ì¢ &7¥áþwÄd¡ Z¼ò“öA@É*V!Â0^ƒÂº–,Ú2…³^}Þ§T5`!tU—”bÎÌÂ̼^<¿^|÷æ”û¯;üí &£SÐFÄFÉXÚ7
8þ -.rƒc_ÞÒÑí<QòÜÉ‘tiü8‡ðd°ê-“ÑÙáî4èÇ××Ì!;Ø—…1£O« -G qÕ!:ÂsIi;¸7/ƃæØql¾üÝâ»-ÂzJæþïÍyfª2é"¶€àî;µµÚ¬e–Å>N± u—ç}¯4û1?TX_<›)Ó~M¼< ço~Ëøm)YƒøÍö z®kãþiK Ë© O.›M”¼ä]€;òcÍû€’%vâ«A‘+N2“CÇ Ž‰Ë¡ƒ€ z^ßS9‡•»xqJJ-ƒù³GÝû”$è””’Jˆ^ìAƒ©( –ÑTbòåp©ð¡°Y´6£SÔn¡ #ÔI9TWè8tô["׳ŽPüàœýΊK;s¼‚èŒÿK:㆛”²ò)eoùíVÅy}ÁË!×*Õ€„úZÛïÙò ,‹”öŸ ¦íà8u -ÅT>Ln;ÏÇýd_êÏ @N8]ž}ÈHR¯Í(C‹C2×›Þ„ÆìåÇ1'Ó’Ç$ ºeúXÿ£Cé ”š<P•Š50ätF:ó£¼õªŠGѦêWñ¸²
ÚN`ßKšSšƒÌÃiTYÎGIh½m¸¹p"èìL¤ñ *\ãáÐ.Oè«^¯O¤I•»6ó˜šKȱsWÊ—v7nHgýíÔOÇ{!Q~mÎHȇ$ÝÅŒS 6Ç[äª%kŽÑm¡ÒEê“@þÂ*kµãSÙŽ¯qa MÏ&B,Á™¤Iß³ûçõÔ#IÇ;«s…èCä©ŠgÍ¿¿N’ÁUvÓT`“Éj†âBõ¤6ÈÏÏ—äë¯uIãªvMSÁ!ÊãÊ
¯D—ÈH=à( Œ Z+Äßú*Çv_Á³ŠÄMb7ôãE»2ÐõK&TW“¹EA€€½A–ÁŸÑ# V| ysÿ+ßðl‘8¾ÔÛ =Òþí¿,”ó½ÊYâÚÑ?#yªñ·e†«ìg—ÒóV“êØ7ßFôìá+ÇqÇyÖ¶-ò6HS„ ܪl"fŸ±üT|±HÊ&Æò©í“fú%Õ p’ºTö·€**
CVbÒÜíb\Ö²‰üwgkªåü»òb;5,=oÙ¿+?YФ|ºåh'݇^¨bŸÕõÜŠéâsÞ~ò -/¶W:aãÄa¤æ[ÈgS¸¦ÄG„ÕM_ê´LZ'ùºðÿ·ŠîX¶îÏÀÁǵMK>ÍW]-t.Y‚ß"‹¾ öÝèNM†ví_Ñäg¦’)ÿ~
ûÇÛ¦]š¬¢u ¯ñÉ°²¿ ·içxùá6œ#&jVÛaÔ€~WÔóDg
-:¹ &±û‰é4W¼KE -Ï&¥¿‡Ïüàþ ÿ¶æ/ ƒüA •Q·4Ð¥
/ù#!Löý—¶j=˜/ðŒÓšO?5ú™|½¼~õ¶?d¼ |.û3ÊMÈí?‰Çb¯8Ò ˆ)†G%ïLó%OBÌ •F&¬ ÈIº ¨è÷Fé·@¹?+7Ò²\-‡óªz€Ç9îþI¸šõ@<=05ZBMåBêÄ°[‡ä HûîÛHªéIÂÝ€ ª/ßî· ¾ì!–öêL« Àÿ3©A«r %1FümѬƒT]Y›ŸýÙ³–ö6»êTùåéŸ*;V8pä·œ1ÂåÔÛ?A‰¶/ÍâÄ›U»ð5ªÎ
× «V»_î…*¿¯ÔcÊ™³Îÿ=Ì|åozbOÛßÛÒÔ픟¿ÐeO݈àýÉ<ªô·eîI¯µ©‹Ü]¡oì5˜yj™GÇÀÂŽ`C£T}°u³7Dÿ¤ÀÀ¸±—¶Ï)=ïŒâŠùç•.Ie+«vž/yÙòç9‘X¢šülNªˆËÖ
DiÁÙ)ò’åáÎ7¿°ÏH€#¯»ìÂyÕ¤ð”°ï-yÒ8X{föïÐfeOß„lÖL9åsF7h9ˆÍ÷(•ÄÆ\ÆbmdÕw²I†/<JsPÕß+ ÌÍiؾOÕ×L½Ä}*zðÕ
=5zgJ%UˆÈ-* Y;Ÿ±™H—oŽ ù_¿UëóÞL…¢TlÄÂI`¿´Ú„ùË,E$uÓÃC·;AL×#vÄ_Ìù—ßâ-è}Ù¬Gþ9Wo«8óÇpl„„<N<~šÇ3Ë™ïsB{ ©ºƒ ÐÞ|<o‡¹LW†Z3n”-ü©dí¶âä$…±ëÂò? ñ òMµÄþ¡¹UîP¬ËäÔtø[SÇÖ…J¸cªœ“»µõYdKÃöøSe×ê '\ÒŸüK|j6AåLî_žõüI»~štá<Hâ«l0ÇéQ/!ë l¨SXk2v“eâ|Y -1ÃŒøùð49ŒµÍfi¸sxv þ¥Ê=„C+7·“¢( -ßý‘ ¹!ˆÙ¬¬E?_,/DóVýþ8/Ì ˜3ý.óRž5k…:|›/D¡hÔîçã5ŒS½Û{Çi(-|ÿCÆ€\Átk¢VØ/¬••ñôªþrÞQƒ2\f™þǶâº(;µÇÊaðòÐ;– 0 j)UŸÆ¥Né(ß¼Lw•!«IM™êÄ«GòA˜š××›qÞÃ`¨ß“ÔdÖŒÿ£µ 6¹¯îÝe›ã|"móÁ¡~ Ëe -[ -¥dŸL¬F#{ªÒ'ôøÏ,l ¢ö‚Ðo€é[bµv™ê5SÙ -f²:™nÁÍM–d=ë›îv‡D¶Öç =í›Ö›#hÃþïÇÞê©?ʳâÏ æêCˆMŠnàpÎùu[d®Âí5Z±í±òaJâ&ßäg h.òòI‘Òs…7y ¡îXç¶tìŠÌ¼á¸qý™ç¯ˆ |”åÅr+²Fàè¤ÎŸFê9gž”²Í£ÆÕLcsE9x)^†b#ýùn—wd»X ¥cÑgtèÁñD
q4ve¦¡Qº ËQÄÙ‡þ»ô?TA_U4ˆÂÅɈ·«e›âæA 5Ä” |<…W¨Ä ùPhst^^ê{lzî¿ -£"¯‹µÙ"n°èP®Q´©|øfohbi-"Ã:æ#µ2¼Ë ñs
`v‚¸¸ÒÉ‘ -EðTï»ÓáÓI) Û pú®æO]†‰¾Ôr¼PU‰‚–õdŠ9¢PÅzØXËGBG`ôƳ)7¦„Û¤KþË\£™ïf•iËÐÈ"&ƒ“IL¸ó¯¶E¤½§ g ú]‘œ‚j,è£Ù‡ßsÝä0³ØÖÿˆ_j*ün¡´¬“kQvtò=|IÜ2[o9âÇEŽsäW?1uK¨h¸cê„ Ë§G¤”}wÕú]püjûϸã·êÕ7Ô°_4±ý4m˜÷ €è–N.ÍoØ‘¡"…SrKF¬Êq*{âÖÔ£ËaÇ°;E¥ !®g –œ«bÖt!ƵNM¸ÚªyV“ÍÙÊÄu ¤å‘Òäó–¤ú¦S¯ûöy¤qô•W2ˆQqRìÇØ¿ÿ©ÄÄC$ÏPï—À¯{O›+"gæý$¯× h§å‹û†y`KZ¤Î ±=ïGê¼C®Í<ú'©µeúÊZ§7uÿ˜
-È+’0PV‚ð†ÂÀ¿ž Gy -.k_-àøå§Õ—ì*a L&.4 ’²?™v/kÖÏþAŽ‰Œ¹Õôцȯi/—å¼6ó¼ß}êÎë49[ -ê×'3{5w^£y©]ßIˆÔÝœÈßèw2þOH;ª«¦Êmå iï -r@“‚›·ò€ÑôSm,ß•¯s°Âè¹ ›î]" Œ ÒX£µ~1=Ç÷2}&] »6÷«ÌA/tn>Ì£ ¾.fÅîVô0玀ÒB?”ä\rÔ@àÇ¡¢¸ùˆ‰ÑFþNåÓSå OÒ#1ü -ì>!½Â"g«–Åï
kiP r1 <XYý¾bQíá~‚s¬H bPJ €÷áçp»T»±æ'l“äíX£&î Oð‚Q
Íü3jì¿ÄÉñÒÏ ¶~!ª¨µ2|30xÍèVª=ÝD»]6ç‹Õ˜¹NêTýL›åô;w»¨J[*îB·uMëÖ¯ÎFŸðXþiGjó¿É/[(ÑvqghL(´zL&Xy_ìH–Üj÷àÐG¢`’° -²øìTZ´Øä>¦C,Õû—d¸÷‰S¼>. GA -ïå[ £™
àyËVÞ<„¿6þÎÏëL¿zÿg¬ò÷1ÓÕ ™ZÂ^I(àaOù–o[I¿"õ÷¦uwð HÙWSœó;e¾Ø„%áòï*¹õh±£2ˆ~š©™–,z9 š >kê€:ž -«ù…&0¬„(ÿd`½iT>ñïËÚwÊ,õ^úóYë» vY[Dè¤5ø“kÍ_¨ÀÿZŠ5ÏM÷¤ -™Yä¥Oó6ŒòzÝ -##Š¢œ^‚”ʨBÆZEÃ8.*fí}fµ§éoê3&„;2K°ú‹ *m[6ž»ÀØš6B¦OoP<×߃‡µ^+E 3‡ Ñ`¹QcFª#~«÷– €uj³1÷ƒÁxx±ãD¹¹h¥¢Öå×—ÿî¦ -'!¢1\gã#†¸ÁMË@óˆæ3a§Ð2ˆ -SóžàÙ%‰!ö‘ŠËYô«`sÓÏò²<#ÆÎ7ðð€.̚k¬ŒØ²—¢§LåE©ÆeË'*î7P‡ñߺ=˜ ŒWºYwû Û|~e&ýk´æ-‡y•Û2× •¨ú¡A ÏŒû~Þz” š 4Et°m–`¡«dG%Tfþw~rê®o6åÍ°Ñr ÄýXˆ1]Ý ›Y’Í÷ qèÑú/;î¹ ùŒö<GœÑÇ0¹Té.R•Z×4Žr>”ò "bL_×جÀ¿pCàHŠA$l/ˆ5«mæ8Ú5êÆð„k!ëK¸F++å}sãçË€x#æ˜Öð`ì
}ëÝH·ïM CÙªò9<n{®Fü -ÖRߌ%¨ñ©íeXZa`ÉìŒÓÛwæZþç•úµï±½Ø°%ÍþtòäôNØ°Õšt½gp -~’ú5dóÑÓÑ<
,-çW¤ðÐh®R¾!‡þeî«sÈ ®Õ{Êëë¥[îÌ@½dY5ï.©ê0ÿ|Ð?DÑcÐ__5)-ÎÃÃfG]“Íé,¡I*1¿Ûʺ† qx³wê§R\0qr“„ÌuŸì²EŒ -¨¼9;)
/™#¦gPý–ºÙ¿ °•ô!‰ÅEÈêÕ¢,Õw=)áI¶í ü&cÕVX˜T·yQW!å1R†ghEÔ–„[x^úzóaCç®Ø\Íèþd÷†~à‹Ëlš&‹–ñ‡='P€Z¬l¹2‹Æ¾QŒÃ.€E×ç"¥FU í~c "+ êº0x*²«"Íã
¾ýü¯ò¿Ç -Ö,Û[ Ib¦BÕ?Ä#”æ Á?Âœ~ïðØÆ.† ´ï6(cmӂؘ -Òå½´C“űpÚ7jCË O;W²¨(Pé\—“¥% 5÷%ipKI>Û ¸ F+È *@] OàØŽ,¥‡_ï a×dñªJÚk"A³ã%¦E_h)6Á@Û Kq+ØHÖÏÖênUú9á, -Ú»SRñ»( -èšB«£êLÕÏìyqÝL²íºX
} Ñ1–½Ê\°œÿ˜ ç,t@|Í -W”ÖmÍqÔ׬߂:í]R¢ˆ5Ó|x¸Ø&WY••n/2¤h4È6›ô®—\ƒ6M%÷Œ%»‡¯Æ’ˆýɶ \Vû0äÕ IA*kxžò°åÖó–¿sÈ"Ö“ŽÈ¶ Úÿ-ÌØÏ}µ¯]øÓâß…Ðýôv2¹Ù化mPQCt5 dß°âIÊyD 9,æõâˆßŠ=†½µl*ÊäÂ/²ˆÛÈ®™B|„£2f±eƒÂmXÞ·êGÖÊoVnj°B£ƒÎÄ•ŸØ qÁåm*¸·¡®òÃÉ_ž
¸]±=š<àÐ)c}:Ü88Ü2WÚ‰ëµ /féRƒníÙÔûQUwü±àÇ’Ÿ»‹Å\ÿ‡À,xŒÅH$œ“/ -ªaÆ¢=P¡áî9¤jpjˆ¼©¯ ƒµî°Gê©åÔ ëZ©>Èâx¯”cŸÒãÛÐaçD|T?Ígìò †Ãè“E0Îëý>à±eéÕ2‚1[ žp×TW2¯Éêì9£•r© Mß.¶ð^ /“ß ÌP8Ø0róÝMDó6coóùkô&8u|q…»ª -¢ÍŘŸà¸/Ë?|Ò0Ûw *9ñpʉC¸VdÂ]3ÕH4¤"=©¾^íBÖuZÂ>ÖºR¢‘.ËÛ~ -M åÑö“ÖEðmÄkÈ䋳ÖE’iëÇZl‚)¤uÍ„×7ËiZur¾´gWÖše¯îJµ „Y=·¼_úYËl¬:Ò
ýG.)«EÄÆ™9¹$x;ð¬$´v”1³¤|à9QŠ˜Á´WOå9b/\ÉÿP;Óí<X£–5Xµ†}ð¸Ï-ᶸC组ڥÒÞ¥(ä³Â`ú³ -\B5ßöM 8üÊ›*¸)ž¾x[ !$úœ£rŸï¡0¢L´z,Î ®.ãG>QDéß³–_š]Þ<‹kÉ&óp ít §ö¦-×ßEéY;¿%ñÔ-V)Q%«–¥ lvòs³ iÛ^þºNN³±@]w1¯ìítN&²Ó®†–ãÝ怷£† ¸ày:+ýàó`Þ`>8£[1ÆgOŸa´Ô¦×½„Y/@ÇvtÑô$*ªW -zGïÁÀG úÛ¿+
ˆ¿…Ðæùr8°ð T웬GÉ”U#§Í0êp Ú Cçë)·Q-cýÖ9rJØ"ü>X€c±˜rb(´‹[<÷»½
ï~t iïÛ:è®eó·áχŒ½r“¨ ¦ÉÐ •èjÏñª¬t Âl³tº»ÎÒ@rƒž8¡jç·Ÿ+Smòn—A¹®ù'z9OTǦ…|rÚµ ãYaFãW×8Ýh -~>[öæÜžS[jñÿnBÁË*ÉŸûîr… ÄÜùlÀÞuq€çâVwV<ç £3ƒ©z}1¦¥î&;ûó|;”œ\øx…÷uâk
b²ùfD´dJ¡ª´®K
Ý: }Woñæ3zÈÎÒc ¨þ¿Âç|& 3´X>§?YϾs<XµÍ˜‚Å@Sä¼ Ü`xÂ"Jžâ?§° ‘÷Ó[O¨¼ñ{€/kÔW¢6îú'G”!îaŽ/ŒF5ïi2
€ÇäþA²± ¡£ Wäi½¥"x„L9ù&l‘d;¾„rÝ€a ´rÞ˜èÓ§ÉVlkõJ²ÕF…Î?äØæuê›âƒ}É?|ú lÎc©düšÝX]†c¬hz Ó›8†@½0³ýL+-Ÿ *êPýÔÇãþV·µó÷+ä%T˜M:öL\bͪ sHøÏÂU§Šbõtx†+ +–› -½®iæ_?n“~aZzn0•ZŠÉ‹…dèåAóÖá '®nA+vÿ–Û'Ðò×øÅV¶¦¶Ò9“Ü®ÓËD)px ìR8¼gÅ%¬Ë5ò>¬,X¿HÉ£Ñe}ôõÿÔ¨J!¥·]£n:öA -»\¼ñ}7£äc{<È -)â;Y9›®foå!YË!(Q¯ˆöÌÞÓ\-V5¢±K³¹À".ôÃ:Á4³ Š AeØoûÔ(NÙán‚è5äÌ;.õ~Î\®$XYj" -Í žÏΛB/n1ž~$
œ³×ñ|`1øp½.È7IÛ/àm (Ê#¬p=eyd¸I™›œœÍ°9cR9o" Iç^¡+´Z’L5D¬|½zƒ”ÕáÇ3·PkEF%»‰îr~kô -5øopÿ8 -ç›èv8ÍÑ=l©C ˜f-ìK µhr¬V"½ø¬¦óþ¶úM4ÑGþ’e™|«ã•—ø¾Ã !P´¤Â6=Í¿=t•‡ü å¥5ŠQCå9º—AØlœ_ë‰EDg:^Óc¤JœÐuy8úHUNÍŒ0§}Ú¡Ÿ—µ‚ŸbiÛ"§ 1¥âN\ ,ù¼²XaÏwH§®Ž˜ æ‰+”àÂÕw!ˆ ‘Yÿ\\³©“Àu8÷ß¹@ï]Lñ&† ¸çÉwJ—©6ÕI!9…ÒÇyˆI8‚Òw(}ÖÍÈÍS$Óÿ³IÚ§'3”í»¸æÒmý®zÛQ&åäxÊÞÞ Ù¸ -Ú©0°y>ŽŸ“s»
ÎŽÁà/7Ê”ñ -ËÜAКÔS ç`œÕ¸Õ˜…TI¾”8Z§`ÉlR€µë3ùŸèŒÞZ#œT9¨ªödº‘9ò‹ðFx‹Zûp²QÄÆ ^,Q°*nDHrïÈ ‘ù"£ß - -Ñz¬æî;cÖ±ÝO{‚¬—Û„þ©2¸µæê¹ -gì·O˜ÿWñË¢¤Æüôö»ý*·¶)‡jY«ŒÆäv®ÖæeÞW;8"=ú¤‰‡ÿ C4~+´ªÁE6õKhƹ¿™•ãL± A-9œxï ž-½bWM(—¹jŽ¤NÞcá!"<+RÄËZ 謵dËqåAiË[Ü´´oË6´!œH©Ãë¯÷*‚‘T¡}ÐÅxjÈ€C‡h,&· ™ü Ë] -r,ð”Ïv ±iök/²ãô‰|0¥qëèíìérN¬êÚl3]Ž©I¾²9
ªÔÿGy@Û:ÌHª4s§8uƒÐW£¾JJœÀƒ‡è<jk›Êé<‰ ï•õ2ÌF ì8‚ˆ”¬±I¢O5Ÿ*E_¢®ÜÂå|w84S3ñi-݇ÑR‚v¯‘Ð?.Våëòîšš¤z¶ÂÎv.µ¤Þ¯ÏEºÞi³æÝh~P5ÞòÚõ°ïh(¦í«¶.k! ýJ(\TFT\In0ù•G
È/ÔgÞaÀÁÁ¦ p1k|ZÏÒ!äoqN<X/ýC·¬QÖ/s sÛàFÛh =4ß”ÿ,Ü$ iîGólY/”âNrô°b›Ñßs -´‰x_Ÿ&º B}GLƒPô^Fwzž?XëØ€ñ3wc\]töÑz -d ŒÖ7ãâg¯Ø]ã«I£&Ÿ7~[ü¥òË–ÖÜÿ95ÔfÓSãÜKÇ… +™& ›„[,#8‡D–ª‰Ä'=åj,3UÑzq3Éz´B7‚ÓóÝJ ý|åŽN ”ÿÒÈš1YÀérK»ßŽ,ñwn¦,½ÅŽ˜ÞK¾ÄlÑZØò²µ(Ûuì‚ÔyÆ5ždÒí €aJ!q„;ÞÁ 6Qš¼p©0L˜ÅѸ0ɨ ÓBÏš1ѯ¼œ§`¯/|ñ©×Ÿ‰C/•rÃÜIO^]áó;Xvc%Ç æšUÅÆÇù¡Ôknv®KÕIÆŒ‘ûc¬Œ¦ÃlÁ›KQjy~圛\秓¦é¶ÐhÈ)ÌŸN@FÓwU:o|qŸÄ‡ d÷Ú .°Ž rX²ÞÛy¹¦³³¨½×M0Ù÷àõ=ßNfjÚ ÈfÄTEA=—·(b¶Þ[œû@ëÜY443×L½³–'5e¶&ŽWƒÏ_Çûã{±ÀÐs6 âa¤)T‹ü%»éu¾¿Ô=»Ñý‡•8H·3$ai³g®ÓÑÞÑjÉ¢… óhH)-–ª?‚Ѻ%¢¡s(eîÏïÁÀ¦ØR á@wAÍÜj¯ÐKŽDåWÓ×'eTŠÓ|O{p.Ê;Ù£ÅF+$ÜóX -OTe¶6”Ãü ù®wŒ|n–Áuß>ð6HCÀŽ³‰ø©¹éV((Ôç3HŠÔ*?»m õV¾)ßÔûè'^Æ-Û.zOž@œ1ð9|¹Äz Œ пñ|›Qx‹Ò¤
±¯H…“`Á"[lF~¼ÂÇ[!A°ÖÈÃFo-ŒÝ),óÄÆcÄèYxX)¿·qr¦r݃ C² ¶WY“±~‹$¬}e\&ôþP,o”‚þ{«Óš¬Ù;½•‰ ñ`ˆ&<Ø*¢°ëKf½ù3u›O»x[§gd—²þ^&æU ;ø‰¤áÄê³oFh{[: {·D3o] ©€*DH„ã;7‘Ú4^êšlaVqˆR a£ð¢=ùˆêQDß5<k" Ò¤û·R´Iø;Þ•€in*ñAxlD9y5ÿ´’tµ nL5îOG£€»ÍE r&T¯tYˆY¡•‰[Ó‘x”·Ö]÷+”>¶ëëUQ†®\JW\³„qÈ (‹ÊPL–ižë¹;ÒX âºz0ˆ¥—C™ -·« «HIöï/#í…F-ÛíêÙá´/æ#5-¢²‹x4”„ñ`.ßf\³JÜLF‚X¯,2Z¡‘Œ³¤Ööò“›é©ÎxöÛ¢äVÌ>¡¤F¹ c=kâÑ3}j»•‘®DÒ+–ôÜòÊ–q°ú?›Ó©ÝI?(ÒÆàF ßGGÜèïaåB¨y<±JªÙÐÊ?ºâ>Ën JÝØE_ô”6¹°g-–pœ÷ •\7èQºxÏ:Ï„_ 츔“c¤†JÔ6Ãy <£±BñMëd˜[]F¯Ó1`Ì3óÐ׸äµCä>í6‚‹£ ‡ÁËS›øÿý½¾òÒÿ¥A®Ã›âÈéw ÆÞùÂÝýÚv)Tþ|…)<ò΄éU=Ù‚!õVá–qBÚ¡pÞºD¢äã¬? Pœ‘†oc“Wѵé†\ą́bäWüÌøƦ÷îÉ]ÑB wi—Tz£€E±’`S3ˆ>‰ˆN±î2*19£®g -Sg,©‰«Œ€ îÙtø½Å¸àíÒ*e? ¦üêîÿ@¦û-·žè¹Äó‘z”œèû©¥ë‘òÄà*~cFGŒçóΤÖ--‹~‹HÉdv"æ#¨8‘3êsëºüš:½i\¸F¦#©hl¯§–€Ž£®2‹ŠóÚ3ép¸ Ák^¶»w@؉ŽŽ$òÃyc½ÀY>‡*êU9³×]" “ -‡_(nK_ÞF2Àq2q σ -g÷?ök°ùN¥à4„ù_òŒ(6¦/ZH¯¹ö·›¥ŒÄ„0í -3Õ×#É^/ŽKß»–]ò,V䞳ѫâx¶Ô -( ´óQᄼ‡p§ -ôØ²Ä ±]lTpæ3)áœq¢Þð]åÞÒ½X§5 ñm - Cö¶Ûͪé7®”rv/²mÞÂçéµ4aoÀÍxam塤 ÅfÀB§~Ê'ÜøuB(%>‹©y$‰þ@ÐíOó“£Ê;X¢ll2y@!ß@¨²º!Öð¨lÃòr¢°¹…~Œ?¼(È+×|ßð¼i€ í†÷!ç%ð.YIW‰<Õ‹ÏŠ †ñ*1¤0D ¤‚Uü®áw3<‹Š¬(µÑ}ëjh*Y µ·šH<ÚüKTÀà&ROCgv€ö:£\(²IZs[LÊÚ.Rí>Xo½¦ å ÇAúÖœÿªÏLgh^ÛX*·‡,~‘µw
Щˆ…Àh䆙YÇÝAè6Ì؆luý‘¨F·õ -à -›€>@’ælÜÍî -À=\®ævù!}pK!yx{«‡®‚×ã -TÝÛÔ¡™Æ|˜éd:ŸüZ'D‹OÌ
["öò2)op)1
ÓÇß=<Fž:ÍK{‹.*mþ^¡ -ÄeÅIxÓ›}¼8H}ðçºDt%Hkî-,óõnÈM;}P•.Ð vV,NÎ+#x}#!6‡§JõZ O•Ðk™ ⱑ1Úü…>jì~ˆz6 “|˜›ˆv¤ -_Ó¢D´ßakßóŒH‘FY¼ˆ¿U|I§`ÿ+ïÁ’Ó)mlÞ: [ †.Blkls@½°]mz ʵ_$æ¥6Lµs©@ _VG˜˜RrH*¾j¿P¼òUe":)`nàc¿¦ò„Våx¸:º™Âѳ5CY†åhùE‡ >™æJž°[<=5³ü|˜î+–r:t³‘Ô¢þ|@.ì÷Ï]â!S||ñši 8¡Ã9É3ö«b}” 1ƒ5¬UæÖo P––56$TeP³Ä.E¹î¹¹!Ptd>üy~ïõÜf°Ò›[, šábü.r/öp’xb~-ˆ§ž|Ód’9_* -üüa+vÕD‘Øþlž]‹iik•ßŠû×G©è)ì‘|0 2N[‰A4ur+xÑéÆÉç´œi'Ðù> M¸_"ó怌âðµíæf §ÿwvsAÛæ ž-ãÌ !Ý84iØÎEs^H¯&-‚š X¶WΊ3vÕٮР-
ü²PÁ“-ð=ܦª>ûr ÿ)ïGÌÈ+ká8€É[?òÞ»¼Ÿ±næ°¾™g¦ñ¿Í(ŠÈ÷Ì/4 ¾„j[ûxèö4G¢îK°Uè³ö“ƒúüfé9Ë t?¥ûhé–– =oÂêþPp0{ \Ì€4ü3ò¦Ìל¸wùhʪ™çtš _WóXèÜZ ´ Û¿þò],SnÎÇ }î¥[WlgbVScÀ2Ýztå ‚“»©Þâ+½]kf¢žÐsD€ÉZ{îøuŽÏ%BvËP¡žw>zã‘XK½ø"£$™ ´g²æöCG ÊØ›ÀF&çã`v]qZ$–¯\ïÆdçEò!0l•e0Ã+9×–,š_[ƒ¨Çš1R‰uËS¸Àçóáø00ÀVÛ±ÁŠúró¥ò®¶FL‘bQ÷v² !©Mâ -gÏcÔaO#¼_cRTÔ¢Òu‡4õñS¢)ïýÓ ôÜf͘—ÍyÔA ×+Hj×gq
¸if7×/\^ž¼²3µqÕ› ®IVdÏÞþ»°ékõÊ…Ø‚¾`ý ïO› @\ ÓôéePndiÂIG©—äñAÅ·ûå› -ˆ…¥Ôa`•œxÿþuí¦Ø»ì¢žÑƒ ]îGºé]ç³0nÙv ÊÓƒ<Óæ+†˜û8y½ÅJ“€™žÚ8YÍÊ1,¡TDP îïM§-{`»µ¨.´)bã4ÕSÕßVÊ{§^ÛÀ€)CnïZtp–0ߦ½Ò õ9£7 Ç·rtXϲ šý0¨øÙ#þGÑ }ÜI‡RÅPÕÌüÒÒ§· Ô*)HäÄP]P9ϺPìŽëjü›à–?5¥> hAEbD’¢ -À % dŽù³JºÃÄ2±MRÂÿ6V0üðºÂⓧÝ(‚‡\Âż_ÒÃð *3ÞÅL¨‰‚kç~=K˜ÛMJu1ß—)t·YÐØuÿ]Ú̇÷3jÕ ëRÊ_\"”é ô-œ¹ ¥½¬«ü#†H·ŠÒ_E
;$ïf]ÈÏ1Ú–nñ—=è¥‰É 2Âã^> -;=ïKÚÂÿmâ©×1uœÓÎÃd‡-4äSìV'*ÝÉu‚ûÍ¿ -ü‹Ó«ï™ózÚ!Óƒò»·zÑJn¢5ÞïÀ†Y!¿dùM±˜á' 4®zíG]pD
ƒx£8Ù 9äÃ2€P`2Õßö¨/‚'6ê\ÿzÿ¼WnVPAüÄÙq[=€Uš -^ë9X-XŸo,á²d¼`±ÉƒêÂ×ÖV"ÅäùľwoSÚ5$}£è eS×v*ÃyUÕ#Ú3¶H ÃÞ\}dE¨†ÐÆ"Eö]wf¯6¶º*±ÝQ¤¼>‚N¥ui0µéÓáq9]£KH|ÿ\{¶Àhÿ³ou³ H€EFý×5X2ë<©ÑWH<wÒK{É\ô6 rÚ^aà(Z-‚Eâüô(5"£ÜçÁ¦U~ij)}§}¬øGkÆJ†¹áaŒ~®½Ó9ÂYFÅo\ù[ ž« ™)ŸæSõä“ Üïá,›#\9h_¹ç ÁŠ–ya+®|Âú x¦”UÛ:+eð#ñâÉÝ ˜FÛ›ÂC ¢o¸“€PâM`--¹õØŒ™† ŠKùÂ[‰éfJS=éi+ò»Hâü4¢Q2±5u'xÿ•Q9À0ÏCi ³¾êô- Ü ³ï®¢ß<xXÂãö„}¨v͉™"µd÷úéß¿ ~@ŸÃ`ÇêtØ.‰ÇwuÍü&Îéá++¬™'bw–Ûb€óÕzò×6Ûl° i)¡Íë몟RÅ>!Åǃ⃞d…1Á嵇.° ã“’×/‚f<Í<Ìï«ì…$ÌZB>+ Ø]UÃÇ™Û ÞY‹sŸïXfÿ20²T -ÃB -™&žÂ”@7cÙ£vur…ll"OJ&!Å4ív“Áh†& f36¼_f´™(z ¿K¦¡³W}ü8n‘e£<òr;E ÏåD½Ç®€)»Ž¿ j-ø¿»D43~ÝÔ| /»é¬óTŸÉ{Ð7 `Øòj -¤²‹yTD -j¸¼–çN+œbÚ§4 ÙxN1fU^JpFó8ge;1¾ 7’ ‡ó1n껑@—óÞJ6•×MÛà-5‚Nz¼ðÊÿ„jubÞû.< -½€$×SU£7¯C™ïÙ‹ièĈsƒ&ÁØç&ÆIN0ÛƒV¾3Wh%âÑ— _Û®ôNhýWØ ”¤7ôÚí9G/1Êo8‚"´H• -ÏÊðX]ÀCù‘NÍ”Mu›œØ0ÐûRØméÚ¡„”à¿ã²Ýdÿk¼®ÎÁ£Æç>( ÿ]=Â)jK õpƒŠtð#@÷§õPÇËu(úš:qdùQöÊû E"€QM"üô…‡ùCvóåýÒÍþ}*':ëWtßÍ”xòÿsŠÊHȨ“!à õ»˜×”† –9@ôa»¨¹.SNÈÐO¿«V©=Á›Ïr³Ö¢Â4 O§.~ë'ÓŽ¿šN3Ôg<á癲ìLòߦâH®²¦6¸ ¢×ãÒ|&Ÿ¨ ã5˜Ë]Ù½£JXs Vh Ý:ñƒ ãPý—ŒÒræû"N)^©JÍ’³›µ- -*:ZŒ`WNâ:R~f$6eE‹6å~ŠÛýµ$¥Ñ¼™SÌBûKMÐãûð K#OâE,Ì£– òé” ]¼ñšïGŸ^¨ - 0µÓÞ’0Yʼã¯M
\&†n~9Ï ¦Ý:³ -Ì,Ô¤ÑI.Ï>2Náä´`_åˆe5³7líà*ŸÆ £¦é¦?û%:•«â)¿ç{c°¦oð{nSF+™œ€<ZŒS×€¸ß&”Æ ,3Àá%ÔE»øªk€la8óhC^˜ÙÖœ°÷ÕàœoAØ -ˆl>sbâx’±å<•âW¬}Ê%Œ§íM+½†p¾Äék¯ó¨Ÿ¡YHÀ<þêÃ`Dv|Й‹9d9ÞûZèf6ïZÿHï ä¶9 ƒ• ðS;¬ 0×ÞÐôE!Ú¯zsRUßäÆà.˜/mw¯×Ÿ°à‹ÏÓÈÚþeU”G˜ÆŠ¿=Mäù‚@Ш"•Ûƒ -/±è¿i/f¡/¿ä@˜×yuô?“äz4
pgØý9ûDŠH,ê%Ñí?©I>OV7Éag1]3£íñ^ó'÷aò Xð)\è݈ßç6Uò-H–Dç];’Ø <9O¿!ô©±êÖ˜¨ò³»À»‘ 23öb=FÊÿDgÅ|Aê˜ÃÐéÙg„ºÈ /¢ã ÁB\É–-±SÚZIÉÞ¶¯~¦Ÿ’PøìºtÄP5Ú2L”/{`e\y+Äį¡kñd5± -Gc‚¤Û2<ªH‡ñ¸dJìE-¼ú`§†„ÔÍ>»×¿¢ñ/ú\þ -*pnEf@ é˜UÅÕ¾ MÌJ„¹IâB¬ -'Q³¹ìK˜L9 Ž5 žRË6ѵûéµ8SÚ5b¨^ªÝ5¦ Ž=A^áDÆAæÒË=Dï¦ý·Þ‘¤Ru¥uXï¼R6UüV Œ^ÃÄŽó®šå)–5²µM÷>—PíYßX ±¾‰×¯ÝÐyKñ_\aTúµß,™¬$*8 q(m3' J„g.˜\áߌ²;ÂŒƒ¼ËEqpmrs9Ýgè&XN¦þH}ª…Ë©Úøþ(ãtX¡]Þ>©hΆ˜ÁŸÊŸYôý~ÞsÑ -rVÏÝ°Õlƒ‹¼/®SÉÉÚÛ.¾Ã–š …R;ŒõŒYMZ‚貺Æ
ûjGšã£¬¢m=ÚöëD
á' Î -̺|Ñ=d*·ÃUš”M1 m¤óš'vnÁNò6(ÛŽ‘&‚þÉJþW¬NUB€v킆¨2ÙÍ#´Ï:±A¸%¿,ƒ²ºk{žQÕ&Î -œ §Óšµáû
ü/jl¸7N4Ã<µˆÒ©cX“Ãäß½cÛŒç™X¦„\¬ûÇä wr¸Û
¶í`*GNkçŽì¿GΞ -ÜX2Wñ
£ÚãotST†ä!¨MÔÁð& y Þ%þ¼Ü¶wÁvSBšö<€€WUÊãN=tŠ>Ñx¥Ó©™Äãš²ÉÞÒsHâ§=¨ª]¥òþÓØ»`Š‰¥ ÝfoúäIóÖ > *‘]ò¹Ÿd¡þ‰7J¤ëjÖÂrŒž 1˜Ñ „I:Z€‹›OöhNz -•3¯)¿šÙnípŸõGG
…öÎI0ê Ø{ùI\Í›`Õc2÷NÄ.+ ]°e–ë¶UB†uBcúŸÌ_%¶™>LÉjÁok=uf®Û1ÝÔ~Ç‹ç ºÔ~Na”W±{„!Ô H}¿äK ùEÐêƒ÷N(œ4@Q%J„Eí1 À£Û d§ÖX®wRÔu?.£W?'nCJ /Ÿ{×õLiE ©Ý4ü59þ¿ŒÄrû÷æèÏ™ú1Å%:U²gD#ÆW÷š
¡°Œ†×”c¡ -Qw›xG6£•qO#Wµ…º†# K)ûß Äa¿ /9¡r¥M6ñÍéJŶ2T4I˜·kÏtã„CVÉòæ°‰gx _T¿g抪šn€Îþ{ -èê ŸýÞæ£1I gêøËdøZXÏûУíð>§8è=¹ÐÎ - B§ŸjO7Ó
1´ƒµw{[ŒÿðxÛ5´Õl€¿1 "î.>&tŽ)„…ì|A⟲ƒx†âMü1“Š®c–÷Fi– Î:_ÔXR†.q_Dà ,ço…' å·=C¿ß±Ÿ¤LÏ4íhøÊxlûN†ÈÅ( Q±•¸çkZEÜÔ¥PY+á‘Ö€èQVFÀ˜ÛH·>>ÔŠ«óÔ¥Níä5B±à3mCG•4Å-jt½þ{µá¢ÂñSg.)5‹%^ÆBìÇ5Uo Í(óXO4ø@§yiT²ýIÊ£.¼nR§iàEÝ£zkf@C>}$åý:ñ皺gofòNñ§ÚÀ•ÑÂm»y± ¯×µ\ -›÷ùÎ -ÿA$.[_1 X+8!g·*½]“wb¦¥… -–3»Gsh–GwͪØd{ß,g⧠-¬˜'Þð t*ZÆ;óìaj:Ì>ýÀg7¾#Œ%®^sbÔ“TnÑá_zøf2ÂÖô¡…¬|RúÊçƒÅ(ŒZ¥Ò;à5n.¥g/|Vúܵúvn'½÷•c”ß^Sá_==À!ªí¹«’I<Ökg D¯LK7Lˆ
ô]e2bÎNÓó:æ —Šk` þÄ úfàþš[ÇåŸ;Þ§L»‰RèaB¯èHƒ‘}]½‰ü*Ò?ô“.p“þ3!\*œ -¦
à]'×
„~l?º_=i #ó¨WåØn;oô°oæTXðKõ¿ÑžK{Ží‚s©ÒéÖ>¼¯› 3l÷ÿ¤Òê³N¡ CyÉöÞ¤ - ÙÁÁºÊ‰øÊ59éœæ ¨Ø úPA6BÍ6ü9¾ºQþÞÞÏbÕØ\…,ÊŸ«º®¬eL»ý÷=¦ëÂÌ¡„ÀkÞÍs’8\éT)Ͳ¢Ü˜û·ˆ3<LÅ }óå“ØÏ%Dßæó èÙs —O[†«,ßï½e2é¡G+oî¤*ÿÊÛig ¹Èª¦–@°¤â2D¾ƒ 6Yç©Óy}ôO §W0H7J -ÿEKæ¡_ -¬°Ä©éòLÚW>æñÌ3L…bœ¨ŸÊˆ{Zd$ÙZGXº|™]7uŠèÃø¥ -
lÚ[óBϯÅ<œM•×Y -9Sçfa ’l÷–VNÝŸÉ͵¬â]g¯»èn]]Ôèò<€¾'ý@uH( nzMæj âiIPâE)¯ÈJO¯iôJ0êÂtâ÷ø@Âj†E±²œ-íÉ_u ×ËôFµLßKÙY ½‚Ä“î¡ãâ™.Ó.¶ÛÀ:#çl½báªïc{ H¯dк|P7»±L©ðhÍ¡\Š>€Þ§xr3Äl Ü»ÂК;|í!=Ë‘ÀÉ21>‡mâÇÂç-ÌФSóÒê\_€éèO:v
C-f¼kÒà&ab½Bx¯nã —âi
ŽebOv´fz—9ekÒ_´Ê ?6FUP¾½ëvjx¯ý £L8ÅpmNõ~ïg¦þ¿A¥$<3» «óª?úý²’Îĸs8÷âo3 [ÿ•EÐ[sÞ U¸i‡^)Ô‡lc†Æp•âTý*ZyßÑ‹| wûj2 QSÁì÷r*˺ÂæœwÑɾ>Ò†1x§0O”lšuät€ò¤9ð€ó5òÀN
dU=H/?×)ì1Ó‡ÕDi «]Kƒ§Šˆíªi•X¼›%yŽ¤; -¸k0 öÁ²‘]WÈ‘Y·£4˜ô´ ý³¦ -½h -”4€0 -âè{é½#üؤ]ÚnÓIÌîâ6žYQmWVÀ´’,Ÿë@QÈò`6Æ€¸Éð1ƒõ+c} Z˜c‚öA…gâ./å¸M5M\!(Q)Ô>•çyÓ ŠÈ ôÜ”¶·<™'uJO+›¸æ/! % ƒ1_+b
‹l -|‡@DpÖOhÜàöo–úÙç21—D\¹î¹5bam~Ýd÷c úôÉNR})Œ"Þ£\9JSÆì9 IeêKÍ»¶Ä²
I9n ߢcÍ -R£Œir÷ ‘[âbeþ ι³Ïm0oã -nº’N/Yb‰~ÇjŠ…φt¥†’6b‹ˆü`¤Ãß⇠ŽšþÓºšÃÊq…ÇôI $Ëãt¥‰;i%Ãéd"k¶bÕ+2ôEã4/ “{ž- Gˆsa¶Ð0¹rìøHáe±ÀÞÞ Ù‡ ÄKMnÁ- GéµÐŸ º.IiâE“`ØÅÕ$a ³U0Ф`{¯‡ýDÈb§ÊK¸FI;ûMšv«úÕÂ<ÁC‚Míµ÷³zP8ë¦T„Ieõm×\^o» qí±=©\-# l áp˜Z2£°ì< äføˆ~q'8ëGÓdOlz,v¯6”˜Ÿ˜«¼O7¼Uç–¹ºg -Îà†~§±Í„ã9Tp"D!Ý:"éà(À[á_× Ê£%j„~x¯ˆæU¬re}€ÐÛûÎ{)²Kïå{‹“w€ ¨ $Å[fq5VÊ,'–K8¸OUšÒf6W˲N…݈ôGsàÁY·Ý´vm —È·7ÛÎn°¸žòÃó¿×"gs6ÒCÛŽ -Kó’¼oÅ/?ÿmûó¸ÖÿÐ9è§|Ý/©öP+”S‡¾æÐüJßuà¿FÆ ,¬]Â9½…·•Œµ
käâ´ö$Õ ÆBa 6ª„ \ÓaãËÅwçèf{“ ` X«‚ò¢ÚO«4 ¿à51ðÑë‹þ͉£HhA‡2Q]x"¦#[ 4ÊB>š·¤±ñ¥¼7˜ÆJ —˜ úÁɘáÊÄâ‹‘4oÆÏs°^Ô ¹XRµù´‰ñ±u]ÿ4 -pÆΡ`R\1„G-ƒíÁêÍ_ä‰Íj”2ö®ñi≵åØÄ0ÄR]SìPz$‡Þ z”y-#¶' ‘·> ¥²ñ ‹"†1¢Ý•DÁ¹…®Æo;úò2®6¡’Zb˜ÞT(v0¦ÍkUˆì„©ho,*¿4Óþ ý¼¿ÿU;ó½öü
ÿб\á™qPÑKañç\6h9’€Mp^¥4621 xácâ^e,:qŸ¯ÆZ,ɧ8Wµ7 ò²ŒÀªtLo?݈"„áïWÕh–
Þ‘çbCÁ»:#›-^"‚nîGäCVˆ¶ î1†CÈÚ”ïšmËàÈ)"žûªÛYsæ²}ÿçƒcfú£x‘räï “y¯(ù½ªïÔþYx$™—TvVЬŒß9tÓTj‰w`/ñÌäªÏÄ{L)]%Spñ¯¯B -Ζ%–3»¶Å†ÍV±½àçÉ¥=>Ù9¿þ Xª[—ŽxÖxÀ}–> CwëÊ:W¹¢‡¶¾–eþ’6:Ãb~ !<øÆ;sAΉ",]_OXŠ×Bý ;|ƒ|™\uõ…eßz$Ø - ¥T® €#}ˆ…î6µŒÊÇò¾Dˆôjr•jÈßGÿ‘Áôï)·þ¸ŸÏƒeEýÄz[ó¶[@F -½ÞŠ™õÙ GœÃ²?ݪuɈ‚"2D_‘{M†:ɳfQ¼ákÀ+ì½Ö¾¼ÃzÜiÎ㓃¿ÏUt'’;àšv鿈¸_(×ó´ÖN›5ñïh‹`þµ+þO±fV8¶1”ÀP'¹ãG¿ÃŸ/}àŠ™s=1¸r[2Ñû5u_àØ“‡4oç³´Š§Jmn'b{ -,’‡AzUh}Æ•¢tÿ\¹µÖúªI×3мfÚÍ"‘=æα±ÔxÙ¾ˆð+ÝÀ;=Ò6%{ ‰ÛFßþ®5Ru¹ÛI—)æÒjRj\FÁO‘[=á ¤¶!âS=+nõÏ! Á -80Yb? ÙÒ•»°
}8È` Á[å„€Ìg
'-`Ù]úæA…ãoQà0dáôAuûáúEõ \·J”RéO-Ú¯,‰Ö¡9H_³~ -ø.‘¨eéR´¸«ê…”Ïåòß‚ Ùúóñó C
o ´º‡Ã_µñ*\‹ÑŒ•âï ¢‡$ äu•c–ÿM+:€e˜‚iZØõ !B`íW{u¥#e aÍ´w‘Î/ª¯F2Áó|¤ 1Ï|.pzé5¸ñ‘ñÒ?jß+(ÏÔß…ÙYñºÐ%õÇèeà*ÉNPSչ̊€³Ìa‰ {—‚p*µüßÖu'´”ƒËßâ‘÷ Ëó` ‘ôdõÉ2Ljö ¶®9›çõQ¸Ÿ<çl9 XA=ó°æÛûÂô ZÉA1¡{}Ü’Á·èöU`ú»Ž€Æn3LHGT>æê´‚-Ø|5‚MœTvök‰h²¡C@ -®º]Xˆœ÷œÞƒûoBHĪ0Ǹ9Œ³ — %SúºM"Û `§£ùÚ` ]ç €“¿XXŽs9(‡˜u l1²$¼!°<›Ež“£lxòÂÒ6Úz,Ž’÷žÈš´Oß!Þq{Ÿÿ±RömXºzÐIÉŸÀOßìX§©¢%Ì¡M]F éøçY¿>t%„°kÃbæîï-Úb÷@Ê7}´uGéá0@ówÐ
Û,œA[DMÖEÏ·Ž¯Ä÷èž•häs™²á¹VâˆA#
W_Wìp÷L I5ÅúŽrŠ]ßrw<2é8SZXd×üVJqciNX*z¨Šm~!>áQ¼C‹ +@uãã<l¢ÑëAq..Ñï¤VáÉŽhÑ£´XÙü?Û°'…¥µ³OVqhÕu¾¨•†Ì6®’÷Yå—ïåùú~—*™Ûp¿›™¼ÄCER Ýt£©ƒGžsBÅ=ŽSñ¿káWªæ¬Ð9zðéíáÏ¿*)¼Û·Ìùfɵ}+‰Ó¹äy¥ µ›¥gR§±ß[¹*MÑ´Å5yœf^ “H#Œ×mÅ2‚jõz¾¸ *Vªå—FåyÉ`J:™>ÕÏQñˆ”xTöyÏàEêŠô§èg¦ó 8Yx¸¾PŒ¶ä$G Â"ᛋﱷ飿¤ô;õ~ÍWeñíEí'ß››çM}79ONÃÄíöE–¡8µL˜ï u§.¼>ò¢Hà}¹Aš; ½›Jc¦¨|Y¢º—¿ ©à·œ«ÎÌ^‹v:&Ùö!奂 ù©Íºl!¿´½¾çR`žâä"öÖ[pbÓâ1Zªõp:·s€‹SWFß"L¯c[Æ„·ìçÑÃÎz©·º“Øó]îÎDb¬-˵Ê?ÒTÐ'ìì¹mCåàâÉ4§¼^5sÑÆÀ¿Ë$•4Z’Æíù¿Ë([í.ŹzÙ¡÷¡sñ󺽞]“°'ýi©¢öôû زyc´‚<Ï¥d]L îìª{$” wE‰ŽDo,ŒLí µ š-®g÷?ï+ÎpGöŽôÞÁA•w±_$|–µG03]4¿«òp3“ä&÷{ãè?”Ø‚£»¦¸CèV[Í Í
ã$‰mO~FßTþáumŒCþïG«ƒ#¢]€{Œ.•þÞ™v]–´”n@0å?ô¼GZœŠƒÅ@muOG^ò ¤Àp¢irTåÝ¦Í ¯ç{…gxPèÞ¥v
§ùГ³»Dü -”]}ÑåW¶Å»ÞLÒ@ôUÍørX²»èp§ç7ÂÓë»!DøqAÃ#U–ɇ«©çàª%ü/@´’ÌÕ Æ>PR]‹3û •IO*j¤¼é$Œm¾0IhLÚ„VzIc §@n|a´£+Dó6-vÆü³·®ªät»¬æô§0%k&OP£ºiòíÝjÓÀÕd‘‘xó'`Ç xl¯;ò’ áÔÛ”œê‹X¼ N/±Úë@‚ƒ{8øê,f‡%¢ØO7Î"0ÿÅí8;¬P׎Hƒïì =¤j¶âqqŸ»xágp*Gø -Ýä XÄUÓºÏÿ¾f˜¾]í·x'{ã-p6z3×à5O'õo•ž^]ÍÆIRš8£QšÔ#¨ñYÕ™Àá^r`ùø àÀ¸Íá^.ÛWVöj#à -Í©@&YÇŠòG…áŽ`ó¨AèAxô Á f YqaGì!>C;#w§ôD2tÓ’ãÎfȱ3
·GâŸýJr’%1:‰¹][ -YA3J¥°´m‡c€ä‡1r°Ù#ý`Йßñ2oq˜ÃqåTØë%uû”Ñ…º·»‹çÅ® - -æ`}Yi†âCYÌÀG óŠa£3óæ;é~Å‚R®a¯þ =AÚdÂ×mŠŽðùÑ® ‡Gm -è~ÐJusîì*¿,
Hû7 aÁ:a âJ´z1šÕ딆ÚJ™nÊb…»˜‡Ë”yÀ÷[‘Ó¾ Ô¼oðÝápGC¯þI¹\hþö;ÐÐÅ¿aÉ6¹¤I1êŠ[Dðr½ L&èCÁuƒ¹v»7™=ŠÀTÉØÌé„Ìu@qiÂì;¦ -}øͳ¨T†à—.²r7*µBèù£Iï€K⎠`LÞçÂØÁ™Û ÏÔí -ä|Ÿ‘¸·±–t»®’«Hž@âyÿ™9£FŪ•â© V$ëÁÚ—[– †çÑÑ㟤$”¶iO“ó›äÃG¼Oè²8KüxþÇ8:Õ¸2n) Ó¤:êRüô9‹5¢ ÛùÊñ~°›ã¥ï^ÁŸ˜UC¸=©*ä Ò
Z’ÌÒ ŸnC´ãÀḠœä[M6ãä›Ð ] Ñå!¦ê Ü“3pºÝ,9ÍäÊ^—ðäÑåy9×3¥úH¥€¬B"îÁ£<RE A¯°Aí[85*>gÕ5æ¬ê/ÈòŠ÷ÿ ó€¨ÅE—#F¾ Ñ.ñ7óD -p[.3GuU^ -é_YPÜo…Oÿ¥rò-ß0K^ܤ잺ì†bqÕÄLË€ëß]oz똯§d…H¼¥Ð$vµ|Fâ+ñJ¯» ÂK%<–‡ *Q¾?2–Åuá·Á-n…Á<ëK®¾…ƒþ×1ëa'÷,‹#ÒÏç6/Öø´Éál=Å×þ>ÝÆx+Ãf®ñ Ú@¡IŒLBÕ”Zì •uÐø}\”¦A¹&ïO2@)œ,yËëjÔ ˜tµÏfkVì8‘^Q%(š–”5yç#ü¸è êϲBéÃh]1}÷\m¢I½!þÕ°87Qɨ& X¬ÿ RG±ºt꣔ñúÚÆØج—o*» !˜ Èu¿ö {Š vYáCÞmU7x¾„g¢ä(ØQ–"}œfÙ¶$††¬e@ê3D<ŽžØdÞøS1úO²xÝ04mrñœª @M—u< „®$:X—?Všö» ìÂEše¼©6™7Œ ôó ëÐØC>µ+¥¦è‹i¡G0$úGsT ó€—茎FÂeN-®ª‘ܨA‹Îºeâ¶þ9(h¦(Øè¶3÷Âß%Àtæ_\¸ågèt^Ð -;í…š~„TŽ#^^É5þô‹ÛÈ訃m¿¸¶"r -šWWFÞ B]ITîã/ÍçÙçn&wA$-ˆz‘•î³ƒƒ…Ã_›Æ£âV?¯å8PtøÕ«œñ½ -vÖ®ŽW ˆŒ'|Úª=%Ð8Ù²íc2çå€ÑõÈìÓ6¬yLo[ibùb£¹Ø gÞ*×1KXÙwü\éÎ@z«ˆ“¦â°‹0ë^&«¶7ªÞæð¡¶d@þô]"ìÛ÷3_´ç䢹sq@x6Íõ3JJöí©ÅÎÍütF|(dþþ8/Sš<‚›F·2p‘¤« Ü!ë)Û£ÛIÎľü èIÀ™´Õ,2”—%\°jãë¡JƒõÑÄUˆ‹1<BS^g¶·æÝgß2’/˜úÏ0my Hü’EO}$_¤vgÑê7q>IЖ ³™wºl™©ZnBŠ……qdÓ3Bº2pJS£> ]J÷‚¡=Ôå PŽqÄžwÒ/V÷ 5l]4ß¿ßLv¥,<~ÞOú¯½§S)`6 D3ŽÚ`ˆ£"I>oðx)¸ö—}JJaÕ›ùï^=ñYϧª¢?M}O3‡FûÐ!™Z:W’:aküò_¦ƒ¯GQ +‘ßWà¾cpE=0€¥A÷Ó€àÿ’ù_mÖíñ¼ó™¼áðWÊM1±dò/ºHE|êSÛÙ¤9{锬(èÎEóÂ-¹å?¤¦æq_äUÂP÷†)G¥qëA9಑QÁh&8ÚBˆ9=…è-~ gAKêoÖ#)T˽KÊõ[ëH0Ǹ1qèM PVcÑô¬ëäõäpC -3üéýÝ €*äšG¸þÙÞžÙ
ía‚ ÕæN5î' ”’¿ºÇ¬YðT-f|Òœ—ªò£‘äÒT/ùLeýðˆ~‚Æ’ÈÉžOE˜[ÔÙËsõ |*Oþ ¦+Ãíü\ ÏH: ·¨µül>“]¾¸1éY(.Óox’OÆ]ÌýòbDˆx£T$ÍPØ)Q:^ø彬ñMüeè° q†hÐóý#Œ›;™¶IÍpÁã§
̸ð_t¶a¬¦È¤iz‡Xús÷Ç~73èb°=¯"dï!P϶ -e4Ô ò‰Ðã 6£›Oä?ñ4%±šä4ã@Ç ŸtšÞ÷4–?Òš¶`ãv“» d%s» -¸ -d÷ˆÏ“mÅ· 0Cë‘°ÑÚ<\ôì¦ûn;Ò—·šùÁuDó»¥ µSYâûtÉÎÒ]Ùø*EpíˆÎIw¿ Y¢óçÖ²$£ÊP;2`%c1;¯ÅÃý…Ï`ßB"ij¶/ .c9Úa íšC,Ä#h¨¤)¦ŒYÿþÓŠòܺó È>óÂúÖ¡¬šKUÌÌÊôJp‡!5É—jÅûüÆRe{G$z§B››¡‚He$1¿$‚Ro¶>;HZ‰'L9%jç¸Ú3•ê`žê¯†Ä[99Om“””02úHVtIìpBìöl‡ ƒ¥
m&½»6º¦!`Ö‹ «¼“±z $ßèm+!IZ>¿*ó“`²4Ùõ·ê |™ n}ƧŸf㦹çÝEÂIhðü¢bî—É¡9„™|êóýUÙè=ƒ»˜qqêšiä*àåÁ`ÇÕ’#=9°R|Ù@$T¯PŠýutä×ÿ#ÜcöEÝÍÖg‰€/(€È ’&ǸëE—g"Âg3!¬sooèrQ÷zM}èCY—Œ;ß4d~DÜà- óc °H_3—¥¦ŒE}Š'¦ÛH¬kNKyóª°¸àÜçÛ‚—ABÓ´=øêÁì.T Áy µÆuÑGï1¦‰ÞÀxè–‰B쯶µ…{åüÀ0¦^Ì£ž*†ö˜)Òâ²ÿÕ;h›9U¡¡l§#Œéƒ½xxêÍÁ¬u`¸QÊ+Ëu‘ÿ×úgn&Ö*š£‡Pl!ì˜sO¥é•ª&«ÃoUI Nq
ïmŒè²dôÁ—ÔO¨)gåì_l—Üö’!çI†¯ÒLý4ªâ5 êÆžŽ*vß>ö”ú¾Áj ÒJ8Z»Ø{ ¿ç¥wЩÊô«®Ë¼lpoìCÄ]•¨‹ú²Ÿ/—÷¸ýÚ_ÿ‰ÈÔãD¥ ùê ºþ¥„¢˜ÿ2f„&û$'IID†Ãñ›$p(É’˜ckXÆQTõR©¨Õ T—]˜ÿ™dŒÿìZu†Çí¨´ž
ŸBƒ ˆ_I‘&QÅvÈQî;)d7Üs{ ÷ kBpl-é®tÁy½‡so; -¢ÃÀyf«lkgR¼SâlZJl·:vzùÔÅ»(‚ÿ&eäF5¤[¿=C`uXsœd qa´³ËÛKf'8½×BâÝñd.Á°HÊ-
$–°tbôbÌ,e)ÄÉ/3µ;ÛP¨4u|™Oq=úïzK«~â÷$×Hf´Îg‘[þÚ·OV]¿7u`)ôO¨§…„õºµ˜ -¹ð7 Ú›ÍOC…~îèzÛ[ùä8°÷;H/?ŽŒË@m¦[Ý£9 -F^ „@Y5pÝä2.¬CŽì0&L°$%Ža‘üÒ‡F «˜9mC¸#MŸë® Û.A·˜Gj9
]V.þ’×ÎdÎÏ&‡ h2º<`Ž?EÉž“X¬n—# -Kì–Ö5ôBêmâžƒéŽ\gö⯠‡ñ„ô¦Í"cq{=e±ÍÓ¯ó\Ì6jUÔ¥AÆ•k°š1 Â'Î`ÖÁ:•L›€²«x tÛ›êtéÒÉŠíÒ×4Ýâô:úëþnNIˆä8#ÒÍ T5̪C)Ê´9懈mHw16ž•æB!öK‘x¸mÿTnˆÚ¯/9lëbùs`
Ò¥…¿!5u
z— ”ø¶;zyVü£ºMia”%Ãó‡j©ÿ ¶ÎæñZ]™E ØO .LJW<Šr;O‡^ÃæuNêÜ‹ó?÷|xƒ8Û:„¼î„‰ïäi²¡n»f@¨¶[Á-{hâÀœ¨˜±ÿ#QÚú|¡l•Už{Lf8òƒ’F ¢|“õê oëÉC5–ºðd\„©qÄ1²ÿmoÞfœ à ò!áç$=à°¾+4úda&sn ÆO;FýŸŽt+n9u6‚”P„¼Žyò4"”ùWG^oC*Ü;!7ƒ"o1°Û‘²ýà¤ÔGiÀv Ÿ¢¬}|³9\Ušg Ìç)—à -|ZR&U¨ˆß-øÏ–æËY°08†œ»6™TðƒGÕu{Õ=HtèÛ×Ëô*ÕL Û‡¯GôûžFžBí„Oë‰SjiïZ{܆ÑY+6טɊFDí·Õ _è‰0%ý÷âYÎä -&«ú[Jãj‚À4º -®áíåŠQƒHtR-¯0—:vdŸ3kô¶úHmÐ e^‰<
a|:é£+™i,Á¸iµyñÆ< -¦‹Ã0žÖ‡ûNFûõô„ë<[Ö!ÿ÷)ÞÁ}Z½LòÓù)EÑKi C/—ë¯Á¢‹—ÁP• w¸+wë„|o'™Oc NLãìÄRaÛ1k;¡’Ã)
‹÷âNruñ3jFÓIŽ©†ç -1ÓìîÞ?ðbrgm0 -¢¸[dŽŸ”‹¯/Gl€DÁâñˆåñ¡Ãëþ…”K—·ðO4y‰ß”vTkÂ>.-lŽtëÛ¦xþdE&äó‡~ÀŒÅ«ÐÅW Bˆ Œê±Y™Â½ÆRbÞ]æóeôû¨'!$ƒ‡ùð´¹ÐЇ¯q,bº ê¡w8ž^åá
±çœ¾õyôÖµáþ8᱑åò)G%%ÄŽn«ðUuü\«'0MQŠW[ÒTqʉo‰Åœñ4ª¸ÍßEß>¥¢Ä½E«±ÚÅã> ÄCwžA Á>Uã¢U& ïŸML 8ÃŽSQ ƒD½‰o Ç$M†~}ýÒ˜ù/íËl¼ -¿§øлì Ã+YΑ¡™W;‰- æ‡ -¿‘îê¤pšÙ¢h2Á(¥÷mãÒ†^U,Û Iñ]ãú™1¦Ñ§Š‚ÚëÎâÐ]#‚ʧa?IwSüªÙ ¥$?ã%I«1Ç›IeÆ"Ð#ð>õß;̧ó6MçœðŒ‰+ÙFJŸˆ•j6ÊI’ÎÉ“2ÁÞBôÁ¢ -KI”•)vÙ%, -–à# .©€,CZçPJÄ¢™(dYö -ÄJ¯R~²‡ueóP¯£^X·€Þ‡ŸÅ!+m·7T6)ZYF+8rX°
®)£Ü_Ñ X6˜ôŠ JNÜ3)ntYB¥É†qÔ g‡ÊÅ5 žSErÁ#™¢P áå}æöH•Æ ôfµ9†ÀbgðhÓ§ü eÇ…Ç&Ú›h9 r\_M ìÏjDŒAç–q ±õZÅ
|Ê€žiÅíÛîõmœ804vbz wÉZH'ߘµÀ‘² © -Ø=§¾®µˆ“åͧõë?þÀ¤Š÷K¡?¾f$ègacœ«Ã6¯ó4ÃM/¼ ^:lॠ…!3 M×Pä X¦ÅÀGÐ}Ó|0ç¨ ó$ø -¼Ju×îÐ)·ÿ@fòF»«ÀÙ”\úÔÀ« ì˜z]l•¼%ÊÀˆv 2 - &ˆ:˜Ä Eã¤]ÊÜg t9j@9ÇX–“jDÞÅTk~´ É•1ïU;f7R -mÈæi2‹(õÇ1glUWVzka4¾œ -Óm|z˜I» ÷ÇšŒ(ÝÎhÕ¹Ïܼ½ ï;u|Ž‹¶DÆQx -N R{kû -zï2(O{ Õ@n&\§<6`V$Ò*Ë4'AáA©å? æÞ¨‰¼æ¡¶yÏ€ƒ÷+©ö}-€¯‘œMø*åW„¬F\•%¼»Juö=z4«ÎËÙ$EÛò†qnyÒÖÝ…ÁF3æ&ÇŠÐ Ýnr…ɵLuZð/víÔƒVê4Í3^ïÐÖü— -rŒÍ§>@‚åöñüïoüø½hk
uú©½,›n!?Ý/|,-õ<Ðõ!¨çs•jîu6ð³É|!55{= ›‰9°Äs`*òÞ# d˜ünuôY -úÏßI\hebdé ôð AÇ5ËbŽfÚù€G}£Nú Fh6vŠ+ -ÌÐå~öØ'm+c´I‘í?/•’ $zºIdˆÅ êÛX‘w ³
s -ÀŸÓ72HÁ;~Ï䧕©ÒQ'‰Ë* -±
> CN?Ž‘I‹hÿæ‘ðËbr´=–8˜péö…Sÿrí»ñø½ -ãkRô!³Ç~ãG=½‡Ò"a×U“ÞŸÛPZ¯ çhJC¾ƒ<EߤTj×îiÙ–iÃa% èf¦ìå ÒþÌ$ÑîX3qØzÌc¿¾¬•Æ;ð«ñÎyWIøúŸ½¸ûPêunX"µrÅ'¬ ë}¼>S§úŒÍJ¨‰ú)ÅaT÷®Q‚$±ýé¾sÐ2ùh˜&€r~Ù¿rÉ°€ -Í -}ÿm==ÂÇ=ÖÁY‹hNÐÔ¨¹a)Š|ŽfKiHð´p§LòÇIpª”Ÿè`×+g~À@ËDI3Ù[sé«V€Ç\ÒfqÊr»hô‘tÄ= 10g Âpjß^À¯/ëèóšp«çüÚ3ë¨ƒÇ H@c¿ -¼v$íñtºÝ -¡ ·´·šçw UzÁðªApvÔ*kÝ·ípº¦Î÷7¼s [®*6ï½ä<oÝ@á.é× À1BïïŒ"õö¥o¸nDÈ•Ø^³Kd‘½Ut6#(?OP §ÿ-ö ðÎEPV”"öMu×GÎvn1sƒ1¶+_ßë aÈWAÁƒˆES½%J‡¤q‡û“u vqÆD %zw ãG=Û£CöÙo5ÖȦ‰JÐΰ¬Þ”Ÿp;FýüýüQö:Ê?ŠÑ›R -q^nJ7uæÐ~dSVÒ‘ñ3¿‹ê·ËÚiÝ´9“(â2ʉ³K·„ì[« ÊÇÖ«rj5|籨Pþéƒ((¤,ÕMÐð4»GyµÂàÖyç‚l²”Ý*¬ dZûU0¯”‡ë6 NAûY7ćRzx²Ÿo@ƒ:µŸ7}‡iûÐ}xŠw#½!´=–ÇŽ<pöEby’®ž®U ³5ÿs^“Œú ¿¢#ŽýátQRm˜0wiÛáSµä¼á -6Gµ{ÐÉ/P¡ÄxÉ<£!È¡/ß©% ÖmÀëŽIŸ¢PÒ©:˜Ù‘ íaSJµPoærÄ ²!&‡£ Ê9.D
€÷“»/¾gné,Ù™¡7¡p ‹'ÊäÏ#lðj_ïXÑÈnJ -
$S ‹6 !¤B”¡uGSÿÈNÓ!™w>0ßC°¦—’í -”µU·³µOHØøS -]æMËüRž´žf‹’ÍÞ=8òà¢:ºh–¹Ü¿ºü`?&±ññݧ©·¶ÑU£{Ñ\ÛÛÙìÝKv”n¨|ÊðGîÈÖ‡u yu ã,ß¿Ô•¤Ñ@ -ÜRÇ^Ô6Òf ”¸½k³ØÌ k]™&·‘QϪÇxêBëq5ÿ¹f*¥)Ƹš$ˆ DJ¥ž£>Á¸–ÄD&‰¡e S^£ÌnH κ}4g5fÚ’”í.§Áð‡cz ó UFÏ9wJ¹~W¿ÝÿÕ t× ¬H»[œÐé tFß÷¸¬-å{°žÆáá¿[Ka -i°í—¼9jNÌMÉökýpM¼&†l[•òG
‰6Ãþ؆7suxÚ¶±îƒ¤²HßB¯dàÖâIÇÍ¥À = - -bƒ·˜3ÈÀ–ÈX[èp&kÒ–a UŒåÛG^^ Ž²#G¿êÏÏ¢ðMßB å‹ £ýP¶©ï:C»—s¯³6ÙB4Y±ÿI ¡8Ç>òY
¥
}ÍÖË ¦GƒV\´Ê?\õT>“êñÉžZÒÄ=¹éàS‘L3·>LùuÃbËõÐFÑ~gÖêéŽqªˆYy‹ÞÇqÙ"MÉ䧧‡‘ψ,eÛREÁfûŽ5\Ø„®¯QpÝSý0ÆÊ’É
¯¨ÈºW]iµÑtà)?ð;£!C_¹ÍÒ“_rf°‡°æm’™‹-dqatÚR‘nšœ 06ÝøYSÉ $Uö‡O©Ýhú¯»Üœ¹õ\$ þÏwJVX|¢F¦“a¤e6éؾëkIìÕJãåo'kÖ,Ï¡º^2 ñö^û5ÆMÄãžOÒz>aweðG;ÇTèTž•êP¨ûñîül«èHpX2WÖ~næî sÐæµj1o*'н îŽxéÓ@r.›;5nO'ôJÌ…âï%˜ NRE!4Ÿ.°Åv/®ÈM8¥ªi ¸ÄŸs»„
Û ®²ÊÀ]4ª*G= ´nýz~èÖ -†2üyKoK\æëkCUAÅ|³`ª»ë-hq<í] Ø "&T]óžv +D».B‰ Øëù,)é—}bF¬´”“'x0šþ>³¤·¯»LØáÇzbè\Ó ‘Ú&Øöˆ–ØHÚÎBu±aÌ\LeDo¸„Æ(1k§+Ç@Õˆcƒ€ÞÄkíÆm ©L
äó¾ö -àWù»‰ÈxS -NF(mü‹¯Ý“R³Kàj#wð{ „¯¶0]K»zœå]ä—gj#Õ÷ç˜îH߃,Ò-8ÏRz]ó Âf Ýf 3¬
Ú™F›—t@ª¬d^G ƒKü/b ëWÑŸÏH¾@ÄQèˆ7”'Úeƒ‰X>„ðÀÝÛruÛ!¨·1$ÿ>« _fÿ$óè[ˆþ!Ì -c ™«ŸÕ±ÁæM®ª¼í†P*©b¼g÷O#ûë<c¶êÔIþç¿àþx–‡ÃOé[ÛtHYFãÄ &¤Üˆ*J -_ÁŠ"qóU0^]á’Šm¥|Àîu†¾íÒ¢¦éwlÚèpχ¡€5x 7¼ -\atz¥i÷Ri M4'Š ôæßI£úìk˜ºEYž©pdî„wÍ 0Hò»ï¿em(pŽæç´Äoe,Ó )EB©&¡2b;*:¬ žKB£táë¼,²ü v)o’>·ÁÀ(Ø$ç¬ßDvÖW1I®5’ -lsîˆ- Xþ?Ï ¢>â«ï#¶£dè;û:DQ$ûÕ wo£í$ü"ŤÆðºÓ܉þb<`SÇúŠÎq6ã¶vÄ΢ZÉWËÞbõÜ×®ó#NûÍo!Ä,=]²[ž‰IîsÖžÑp „\G-ÿÁ(ùœ¿œÏÒ7k Õаó*s$™$Êþ3û}OM] Nà Fn>ˆÛÓ> ‰o&}ÒQéHð£[éyKwZ”s#¯ßñuSiitÄRŒyY2Y±ÀgBý̘B–3 -úæ8§Y_…¿íÝa‘Q_B®Ô/² è©Ãîþ¼•º!/‡¿+0–Þ{éI9·)*Ý-Aa .æš9§‰äS±Ò´Ç“à®O— -»i®aëÙÿ,²·€‹>ûgÉñvñGñ
Pv´Wßhkô—4 ˆñæDP׶éáÝ2Yìƒ4ÃÁ{@9;“~ÍÝã -V˜ÿ^\hÆ°ÌC̽%«›Îb†›hK¸5ÃXe Ùí³þ²>`¥òö}ˆ\“+~~’Û§x†-ìª8.hXºeë„MÒ©=·’"ªâ Gèš4eÄ{<AÀ!PëÉ¿êåó6}¥Q¤Sôµvço ˜éûý»\¿˜Á€BbµuÇ÷9k‘îI+,å¼Ê:•å1€8dì ÖÐ_ÐëÒß´©ÃçCóÝ7¬ÆȈÿôíÐ…(¶¥§Kª=*œ„„õ“=u÷ûºÛ,~Eí]gÞØ6×HÛºˆ76?8¬á0žšóù£*¥ ¿/†41²^HT3 âDv·Ê‡¼AGüH'CÈ{ÓŸ…þúTéæNì3CáëŸAÒ¤µöª:Ð$D? h´¼¥H§ü½ˆ.!Ôž ºæ[™} -ª–žÒ(‰êÁ¥ ÅN1ÕHdÿ&òKp’œéOSŽç0Fã±=”ûV±q¾ 6y×Ã.¥/?ë]Ð<íÆà4Om¢}·¸¸]„EÈ ˜›ª‹¦òCpfc™ùQL¨b¿ˆ †z7w -mZ¯ -üκÉàÓ?éjo& ÎqvÓ\«ÓasgjU:cÅX -OÇÒ ÙÂÏLÜ—¡'´—©ü°ñM 팀1ˆ!_M½IÊü^êßSh(Ñ•eâvœÿ ¨ í ;þ¿·¡9)¼+QK?§ëCp¦Ù -ʲ -éÙûãÊòÑ dS/™‚ˆvÊpÑN<!ªV¢6ØQ@ PSÓú«~ÒCQÇñ¸Y©ÛÚ4оž×ß²àúGB<Ì×ÒÌq‚EùØRhoûŽ ç–ŽJZQ‚IMÙ«Ÿ¯†A,lëæGúElæn’"ÎaÇ‹nˆúÎUÕl¹øy«(g ÀW˜©§ -vô8rËQ]ÆJ>\€0›ôËX%»5ãÃGðXÈY4¬¯o¼žÌþ{Îñt
WaÆà}aíÉ…Ó(Mnåvv,9LÑYXH†Eß» -kõ ~d1úJIM:tÌ’=ØÜ`‰BY˜Ã*µ¬àyk ò©€«Y L£A—ÐûTBÙÑÌ?ˆ‡“Î?6ÖAóÙŸÎi'«rB‡xýdžwxþ„èÎ6‰úË„ÀM^y|³ð¶©ÑŠkË[}ŠëkÃ\íK¼þ1ã•——[òyÈ–Î 8c•þ„· -D;.#Ù>´‰·³²â´æÒ‹\nÞ±’sÂI¹ vÜgûX²·¹âd2¼ëí
¶<šÆQÏ'£©g¹ò¬pP%ˆæË>Çl*®¥¬àK#|Œü‡¯ 16Îðz’×U² )
ѼҾw‚gètQq—•[œß°ÇV+>ö€)ÓS>Wþ¨²¥DÎ$HÐ0MÔùùºŸå{ùèÔSŒñâiM¨Ô×<M—B"Hkm³rWú„“R/ù‹Õ&Ô° ^Ë ]Ôó×(Uˆ<:ðÃÉŽÄÌjÐj‡¿g} MÒÎ2
T*áÚ7Ï3žë8)ÙÏ; ¶iæNQ‰6¹2xÅ¿²å'W4&Š®¨Ä”# )Ïeô>JîÀíÝz¹!©5îq‘ØMigBTšÈÒv‘ 7¼Ñ=•â)Œ æÉ/Î1 ²Rq€›Æ:†¹Å´‰NEn¯Ä¯fíšá ¨Ë£Z<öÏì²R¶T°[ûnDI„1vÕ¹FÚ×e²×Ù„LÕ°A ƒ' @kp#A¼äïÆæò¿—bv9–¹™ë®Ÿ„£´©¡ÕU¹¥ÇË'¹0Üž\Î%¶Ë¬á“4×JÇ1–ú¸Zin~þ]«Ù‹¹ ¬’ÚV(@Äeþ (Ó-dék±\Q§4¶˜ürž>x
ÝA:óN£×‡oð95Ž%[•ƒüâo¢4,c×ÕYwÒ&èO䮸égnBp¬»µSÅÍŽ.FpÏæƒ2 ÈqAææVøYøcËêRFþÖNʦ €s ‘LwdÒ)ù ð¹Û€Y‘yÇ0Š.û/â~ª .Ašœ MdÖ•%äï´@Û/pJpÌw*xÜ Xþt\p¥ùr(kÛSBsË4i.úòydÍ— QÏÇYÑEGA¦ü"°¢– J -š>iPêu”#r|Ü -MŽÆò jX±€p~zŒ8/Ø›„‡Ì8u ü¯ØáÄ>“ºÒb$®½¹f¥ è#"y$Äßn˜ÛFg”7BƒLío‡‚êË=û©9L“EÇ'lÿ«{–œô? ¥êÏ_^…\’¹«™Íé>½`Ï}s; J,ºƒ £AMWŸ17¼#òeã4 ³—åºÍòQ‘ª˜Ê-§ÕvH–îï*àÖµµ1Ľ[|wFäøБ3‚ð{¸{ESO¥ÿãíÈÜÃ×>˃ÌB)(ç"ž<Ñg'Ý(hŽòN” aF —i åö°¹ VUü£K™ekÞ‹WÈY•š"¤Ík Ћ=$íÄô‚¹Ëð¨mÝÀ¡&ÍÐÕj—u»£DöàÓ’†q‡}J‡¦ny¨]ñ -°¦:é -»XÛQ”¼JúÀépr”(Õð€fò¯Î·‘¥ð«·€ÛQØš¾àì„ïÁ‹ ß¿¬D^¶ àIŽÙ#Ißþ #ÇeÌW -• ¥&ðb0꧿µbâ£^Ý- -X„»ÛÙÅ<$•‘0\j]0h±R1¨kqÍÖˆcýU·Md—X§7û`@"3%‡~)R¹ùUàXãçƒZtG_tá'Í€ÄâÏ“
t\I¦#xi¥ëoŽ[Š7‚7bܧ†µbìÿØ@nÒY~?
Å¢•:D°òÃyà»f]݃ªý‘kTVG, ¢ŠCœRéçú ÊÉ9@Ži-‡« -@Êþüƒ*òxU‰ '£+¥O ŒÊã9¾Å<ó¿* -‘wÒ -yûÃLSõÃàq fgpÈ#±½^óÍ@œk¹Ý<ÊOã‡kÓIžñìljB4¾•"S„QWßò;ûçMŒoâ쎨¯ÏW¬0G™â<Ú×îø®8ý‚k`µX ¤nF%¾êcÅn<”£5׋b¹yT±×³íI0à è®rw4*€ËSÁÔV¥š:âq4 4 ÒD²+Q×|ѯêQ!fÑw]ó]Õ(Fµj“dÑ#áµr‡‹/[½rõÚDã¸èÝϽ -´ÿ¼:;®ˆ<£2$¬ç,€¬Õ{8Ea”Ï(8Î7ÙnT‚Kâ«zsVœƒ ’ãØ7¾¸1bìî«l tú:“@R¾öæ‡'6ŽøЄܦƒPá+ÊyuÙìs–EÙ€„€aŸBô"Ï!8M•”: ›Þ€á5ìx”@ï¦W£îjï…]Pì" 5á#:cWéî^ÑÌáýç·¢ÉoŒšÞÔˆ°rÊìå³h5Õ:ŸF2¥ã
•NoBfÚŸ3ã™ ìÿ³ÇfèD'í· l¸ˆhý]Ñ|JWÓí¦x‘/6M=²Š[;ÜåÏøôŒÖß‹¿®°íÎ…ç¨ë½EL£7y,k'h&`v¶ëAlú[á %\ò>‰ÜˆˆºÓæÁx\÷0ê91!DÂe^˜þ?á´ë —¤ãMÀ¬t2·F-ršÊ/« -ÍÓñ8P¢|#±È[ÁcNn8ó¹Ï¶8èa"äŸNáGê¥JÛÈ GúÛ13;±€˜ ú î÷\ÌC -ËëÎÕ'ÉkX»4—§kÌ -éøÛ-)„—ÀSÓ†çHÆ¿ZUü¶UyƒÃ¸»¹ yãˆ@zæøœ¾»Æ þسS×à”ðˆÉ´F4‚þ|:ÎÍ•}Ù¹ì+ÌÁ|[ωr* o:,5îùê… <Sœk‚ó&àK`q‚,׈x˜°Äò\#°h
»j
›ômsw#☥‹Ø’‘-FÝ/û DÀb®yžø×îÞ:l
"‰Qラ´ÿŽØAyÇ´olx¾ -ìêö`šÃhƒÕ:ôbQ<f3ó µ¤‡ k ŸîÄ#A%¨ÊJ$xÙãS%à2¡Z ³ZéÛiŸK×çEÌágØ~ÜÂ÷J…ó»— q³¡È†ÉÕµ©ca«ÂKpT·Ìȼž>)wÖò›£ÄX4K@ù,“¿RÅ k!ü^=X -!°ØeÞ1ðEÛ÷á Òëñ¯¶îK®ûËm -6È+A¾²€Ij^X9ÅÌm6 -+Ö4̺(áÈ,¥•pdÞN¹jŸüD -`õÈ4àGñ± T§ -ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿLARCHIVE +W„ ¬ùÅïÁë‚Ô¨ºérXÆM´¸&=FâQóm§˜h? Þä!CJÐ+Í™,ÝŒ²D¥ƒT¯š å1àÙnº…ó° S^z†EÅõëõeZ'Ÿ
á-p oïò;—Œ"r„Û?áo´§ÒÛ8ZȘ3¼Žã;]ñ{>h *¨¼µBK> q˜$ }k{õÈ>@õ3lt(/R ®º/ö]Úºfo7þ¾¥s7ýèÆ_»=CÀ4éƒü<js–Ðà;¥lÝ£ëaeb, <Ç…G{.€–“u±)m´«‘N•ÎPã¥H
qSé”ìMÜ57ë¿MËã<*tÿ2ËÓZ¬ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿLARCHIVE +OE³‚ü;|%(°ÔÜÇ5ÿ_ Ç-Ê|0«úÚ`%ë%7„ n’ðSz;¼a3Ø€»À£’‡8Smþ2Ù+]GûbE]"’¹cS€eŠnó0겘ˆþÂ(H™²Ø-sÍ€Õ>Ž$÷´6ù…‡ma¢Ä鸺4¥^ùHì<JmT_ÝcâT j‹n:,5¬ñ›äF‡Ú9£|^6K˜fl†Šû’ë¿]¡‡
?+B#fÙ@†Þß[ODf» Ä8CñüŽÕEft…{`Ç)=¢¶±©xÛà×0]Z& +ÛTÖ…(ëóå‰&…¶ÜQu”m©“Ç‹ýZV0‚ê tIPŠ¥ n„þû #Ž´¸Ï^Vs Yþ¦»ÚS?.]edfºTZà¶ü›G+=‰OW;á@:½{ßò)8G·…&À7[!ðÆÌ÷ ÊAl€ÆLC–³öÃu ÷‘ReÒ—Þ2™ýø‚yÖv=Šƒ¸};À+¯òTƒã %ÆÓê€Cùá8PM8 +MM…¨Ò“°ÑøÕc–SuȬo'‰~Üf@#Ä>Ú—÷&=Š^Í +íl«oWB(ó dÏxÀhDrmC¢}½åœ»DÓiíÆ•’|ke‹9H:_
´éma Óaéuýd†wÑ
–¥E‰LÈR¡xF faš2 ©®~<¡fkª~·økTúJ¡î9sÏò*àdMÒĨhû[w#òa?<Éšª³É +à<³ˆ´ž¢‚ ¥iV·Ñt´–´•Üî ·o š~š1ú-§bMeG‚)Á…–ÓÕq̳ƒË`Í µµê`°i”—`VžDïù[_áó’Du
|]ãSöêž’¿ï»}õ‚ c*•ŽÁ O
üc7ãd sRöL[¥:H ½dÈÇí +”œŸdó@ ?LKÒ¶k1Oj\Ÿ]8XDð<{ñnï*Iχ™Œ*×·…+êQ6 í ŸNÑÀp!«Ä¯®<'6cÀa§™6ߊëE6Ž¦Ô-[aðdòîfˆJæ©®™ÍšÕ{È< ~»ß¸ãÙ¸áÚh[íât“‡”#»¢nNSYI½çD5ÝÚÈE9CE!íø¶$HäÐœé©òÏ‚ /¬Ñó [ÿî7&+ªTq°½Œ®NŒOxud)(_Q¢ I § Ëñ Лç +4bfA&4ÇÝÓ±üƒ
á™By
M×'EB¥¬@¤š=K©WÚ¸±Õ¯s• +È o*8W¿‚ ‰ üê´ Åk Ñ.sßA«äp[â'pݶµç +ÿ…Mò” +k`“wÎátJcv-zMÞé›Iͦ%ð’´¬ê<çGƒj¬¬Ûì´ý"‘Î@½C4þF‚ëÿH^óø_T•t±$GÓ:?fxQç‚ðLÑ×K3‰[Áº
qZÏ1=l‰© Èo¡„8a`ù¨¦´£ Ø0¢`Úèîê^Vf«ò‘‘÷!)#åôÃî£FC9>°@Ǿ¸€p +†»ÊzרEsS©Ä™;Å/z¬-óŠ¦_ K=¢Xϳ‡ìXßËBN˜B„ Ë{ƒŠÐýÿ^ ÆÏDNÏÌ¿bj»"Mø„ayÉÃtøº™(3Ý>áûÚ†rÚþ³ØÀ¡ÀÞ 9³|çÅ‚Ãysêi¤3yðZ=Ì †8¦zC{NqpB ‚…™}èW2onn™ˆ¼Z
ê |=Ä
#T˜!“eìÏzÏf`.„¾ûì/_‰Æ' ,ƒ5c¡‚7<uÅw6‡„t™À:nÌlRªˆJéÔ¨BÁ¶!VÆùÌn60]¦3pŒ¦¬þ©*+%$°f¤2þ IÊ|#A“Œ·¨:AMDïwÞºFsƒKY,³õ€ :ŒÓž×XóïÏ?RÞzvª£yÄé¦G)Ãñ†å
h• €8è6¿`Sᦳ”҆‰þž¿FFü5Ê”üò³ø:ÄLCò /’süô@ÕX ó_=Ȩy~Èó¢Ïgœ4\º&˜Æ/(úœšîTžNËŸ¸) %Wu_ZU rùe[/,4X0Fþp;U5$uî–™Õ9ÇÖóoÑ1Ï ‹£ £IÔ%ýve¨þ™-`CÓÀ¸–d×ø½d° â!l‡¥†×%F#à0jCi@M
)êX¨ÇL’S¤¡4Û¥À©;#JE+6B†R*ÛoGÿ„|‘l6'¦¯<Ò»é'6JþÝäü;uJÚÉTøà5¶ž¼òóéˆÂ¯ŽXõ÷ú2Œ’Â"%€Ÿì²hr4_¾µ.£ÆxÀ|ÄŽ] WÞËÁ‡¨Vv’yi9JÛ«µ j |àN‰ŠkxÜÔ†Ê6Ñ'M½¼
Á”ÉSZ2=Bfk¢
rO…`F?„ogÀ÷‘Aýãݼ§-^1m9ýóz&¼€‘*žî{ÒÙ›¨ƒx¢r«"•¸¿²k/kº ~M”)«þ5µX<&þó¯üSûǬ‚>¾GçÎa42ýfõ†®MZ½[ã”@xLÞ0™ý9ËNê¿*ú' ò3•~—íSÖ5– CöUÓ$ù´*˜Fuüæ)Ê_å°q´sp…`´¾¯èG¥ g° +ê,œÎMÐEÝdÀºV"t3g*¨rZN@úü+T+ªeô&æûÝ{þþÈ·µ3dsWD¬D¾¨eºË}PSiw¯þEÖ µ—´Úf ¶ûʾâ´8Eègõ©½àf{â…Ä
:½@ÑMƒËŒZÕþ ï6bбí±m×ÄúW/à‰6=Ç¥ÐÂàv
•OýI4q° Ñš:Ç5Ôe?ûÕšY±ãsdX¸ù®‡¾Ûé@ÌÕçáÆ*¢*kûqßÒlwðÅÄ ×ßݬlL %Ò¡tJ¸zx+ØY¿K·‰ðk¼ØïŸ&ÆlŸ `<»Ö. ö µÝËoh +Kʼ½$7 +wûºTƇ¹ìçÊÖ†“¦â Qµqã}õõŸ¢¼Bûųüsâ… Ìk>²‘n +±Ã9„¸áЦà`D€2ºv´CÞ¤‰Ë´ùÖfZ&;Ž¤´RE„ìx\‘…¬ °ÇöšÙ•®vÒU`r v¶½7°j|k~ð|Â(kzz(‹~Lo&ÿFÉ°>GT®mÎ÷÷ìd "VþË9Ÿ7 [ô³ï¬žmT#BÌÙb£ë";Òñ@æ+Ÿ»ð¢k`#H–ñ?hF$ÙfHg[Gª½’‚…T÷ÃF/…F›|‡.ñ¿Ï3û'\ñÀÅÍ]·‡O5‘/Å–3O<Á†u5ÕÑ»ü)Q¤ôZûLØÑGò[¶¬ÒþÃÆçÉÂðÄy&mŠ\‹[K°§b9jãÔÄœÌ×çÊØ{—Uî<>Ìž+λƒ|vĤ>Š»=Ã=`i~‡]¢Ó¦ø±äæ|þQøÒ"3¢îÖ¾xb–gpÕ¾ p^(µ†Á .,;¯ÄÃvËfF¤‰åâo1ÁˆAPUÉê\‰š”ž ödk¥ð½ˆ2I°¼ ¸a%¼ +{‡%/=¿ãÔR÷i[è{S²ÂZRð©SAžÂŽÊn#ÿQØ’!5<3ƒÄ•AšdˆŽD±¸X¬Ìv²)„_vµìæPAÀ‚ý8BžTDhŸÒ"6èÅì¢,¡6>’p0zŽù6…Œ<lÃZý rÉ17~g¼™®?ªcƒGé#jèÿ-}¹†ôû'~*ba¸\?:ªYUcÁôcdîD†ÛtE½"¯Æš<øcü±$r•uT¶¯éLu'h€šƒÞœÁ«¯z?=Çš¬Éf¬Eã½jÁ$SË5®‡ ô¶B+îtÄ+¯ÒRM¶~ÿºe/=
vÒ“Ùe嬸#&[cè<{yç=ŸEïVk úÁ z©÷¨ +CóÚ+rÓcÈ}(·Ü’1ÎåS`¨bŽ&wº»VÈeíÏ¡Êï÷ï¤A¸Ü˜0˜ì ôGŒ×ˆüË¥iÇüõðlQ¶\eU°Yy–3¡éÂñ¾P-M¬8O‰çëÝf‘Ö &?
2jÖÛ˜ÙW)“Ú›/øÁ̦þ:ý÷»)JRr-N£´ÁÌUá<Õ§r¹D"» ´%Dª# ÿ”v(ˆbÞìúÑc\w™BÐg¼ùÃYS¬ª +…ðÚNû+_·<[”¨J€ðƒÆqͳVÄ¿ÅGÌ› †ÜÝ œ™ˆ2c‚N®3N!§&/!؃P4žÞ ÿ¿ÂÁxFùTó†Æ Öˆ—Q†$AÃ
®KdP1iÖ(uÑ“Èž©²A¢œÞÁÀ |˜7z ¤¾™Z»GéúÂMÖÂ_3ÊÕ á'œòR´ív´p–W’ê-r4è™ñPµüXR@ŠªR0å˜#Ù§P¤ZMµ ˜V}ÈJ!&¹KAOðÀÚ«?ªs˜ÿJ\ùX ± ïœò›’T?dÝmÇNnË»jŸÿQJb‚Ž…þlóé0¿é‰ßkºTh&ãñ±öÂD¼òâŸ~ëø,Fƒ³w'«žlÿ˜4Ÿ«4‡hÄæRÑÊ[mlšÃçÖ¾@Ò¬Y‹¶9ãæ—!w’ÝnÌK
Q¬%¦³–·Õr^(+5Ns’½ÕÇéU.èu¸˜»Ì&Î ð¡ø`4>Öª•¨vôO9w¶TAf $.€lcfoaŽ° +ÍFçÙTBôU!´(BûÎïZ~¡d +(<.ïÚ~â#J_P™çdžÉd +…‚›žEr±l«ñ6q×Ê!z/ +Çh™y OÄÊÛÆÐ%”͵WNÄæƒû½ÃI Ê.v2Çæ4I¦Dw&…]OòFçÏ•Øõ¤ -Ô`SoQP¶ ÀcµFT'‡•{|°~jäÐF'ƒÛäë`ƒÀó'‹gj¶AX©ëî +F,`_uÄ4s"‰¯Í¹Â4{ea‡¶àŒ dYÜ( Ÿúa˼_nîé†ñÌJ£ê›ƒ 6Ì‚‚X¡aMêÌæsR#5?^3hAa†…ÝsÏT"ÊêÆ–qѪݬˆÊšh…<}BÃYÀÂíÞ˜Ø|æÃÌKÆÝ¿=ܽÖOB|âß)¨dÏ +}÷ÁOâYس'•'ý©AI;Ò +ìê0ƒT ÎæyÝF áöË´I‘€f$íxv¬iT xP" +r úD-·Ã’+ÄyTà(X'z† ü +š‰$ò³zUà„phã0¼* GR€–wº + « Ú<?¸[7Û¡uU +FêwL1î /Ml‰9A^î”øŽnô×¹6¯~‹j èñ0ß’@*S Ì‘AÛ‹>ãD!a È_õëkýërTð£Îzñ°¡°Bå ³‚Ù£MÙµ!Z¢J’Žzf>Ô¬¢ÈrꚀ¢ÐÔš€…ì(tN05áýÒŒÐÚ Ã…° ‚¢Õ…
ýÿ›Ûî +èãV±ëÊCw·ºíC®Ø¿{Jýϲ´?ó<¼@“‰1œ !A³[ÔQUn£2<¤êýF\%£¿úôÃ’ž1’ÂcVÉ^ |XÒº«Eúª3 `Üšø0u»ºÏq £Ôl(¾²YÓÉii«geu±µS\À9-4<ÒO“¨Í†×GȳßDÏ!ct% Zma“OÃ]1ãøAJŒS1ŒÎÿ¤¾µÓ¦¥±ËÆ wP ×~ Ñ+”¯Kt|ºÌÌ¡†TZ ᔀØè( æ-4_>æ„ii~¹´zuË36<T›23»LÞA]/ûL7Ñðë·2“ž«nïƒÎÒt%È#‘ ±"ÅIEèÄ,ÓéÕœ¤5ÞL›JÐ$+÷ Éãvë8Þ`ò,ßÓçHè]uΪÞd0Σ²}N¦¡]ž¹9‡w
«Åsžû¬õ¦Sds›Îw³iÛƒì…DÜxIx\‰^|š3šôD%ß3apn~„³RfËÈá“Ž‡\…˜kú³û"ºÿEŽ‘ƒ¬# “LÙõìȹQÁ³*¸à +2êåÙ"Ú+
2Y Ù¬G” ‡î
å–GW_áÑ£’Gô[‘{¥² +1®×Éã½H¼lMenGÃЀÑx²WÁ9Ø¢ ¯ª(XçïΛ¼†:[ƻ޸ìñó DNYc[¢Ù4!"ÑÍ!õ†‹€Šx-øþ 3mg£áÕ2çáo"Ú“1G‡YÁOEüt¤ŽIœzÚ##œ§—'î[ç db#“Ô!ÕR³Å£ü”*kÜÉlyçTá>!Éÿ†Ð¿*Èiz ¶ÊTœ¢‹%5õáÏ +B>>ê ®¬PI ùâ†õ …£E£¨´Iv¯pøýl=¹ +åíá¹™öm,앨¢ù&h§'Å8&q·D*`*‘‹É3a†¼~žÐOKסã[af¸0>q+¬à”ÙÞ +òí|¯< #8‰ !T8³¡ +Ú…ØÔ«‡`"J2 o?¯Sáäd²[ÉÝÚ7Ž#7ƒ+À óáÿK:CèUXŠxóK‹¾È@ÏÖV9ÞntpÜÀw½%Ì®IsÝnð|3çʵøŽ@7g9òµFvÔž!wŠÅ.™´\b ÆዱžÙ|}†Ày1Ÿ÷ ¨ˆPÑM¨QªŸ;¤í¦[=¾ä5o¥ëi¹¨èêÑ+3‘)³8‡8¨X·ÁÎ&ôSHâëæ€ Mp ô˜}[—k£å=·cÉcÒ¡f:n(òT¹´Ààé¡Çë ÚN¬Ž(mfæ<û¾mJ\ªBùpW6 Û(hjYÌ£á_k’û qTßh½‹WÿgÕ GWž†pHÆg¸ri¹ûþ©˜ÎHiX ®Ðø:ÛªºI?á!ýU4 ˜e†?É毟ӵèu;…$/ä´ a¿¦ò̺bcÁ°3nñwQnK%‰£ô¬*-ü,ù¦~N'!Z ÄÚ”V¨!
Ž^«»OIŽë™Ê  _ÿŒ¸²îœº´ôði_Dvò¥Ðè7UÌ©®)¿‘hEj1é´Jù~‚áþK‹É9þÊ«óh# Ä\ÄÏtÿ}Ånˆ’]ÕV£^)^ÙÛa¥CEæÄ¡•êô ¿7Ç`!LNbƒ#BŽ»lÝÅNAWC‡–¬¬sŽ©Á¦d=Ó ‡«ìpÕveFðB;$ €²dN LjšYåx’rßuT¥Ö Þ5èm4ýÎà +#aÁRK-6†‚«YcY Nµh€Í·5¢ Xv0&ï៱<C㘡Âw1]»ðI{BF–nší vܦV‚$ br|ç© ßÃäzJš®Ê¶VÍSEf<“1ZV½”ÂN2¯5å)þ„½‡Ø‡ìH´$DGÉ#ïÍè @ùKÎoÕ +¹ÝSÝ%wp(i ¥/‹|6Š„ÑÜþIøû –ïîu½Ä-ïu'ø‰(uhœõ®Z&›˜Zø› Ñ _ Ú"q”¼™)†^~W”×gѤm˜‹ãÿ¡3C…”rø[ÝîtxÀ_Nlàc‹|uTuY7w ©¨‡¯qC +Œ¥¾n»ŸSu¨àðÉO>´ê4PÑõ(¨ Òøê4)SXΖ âØ‘ÁK¶Ê¦Ý Œ +-ó/ßýÏBZdZ¿ÒWGF/ò@OÄÉ‹h™ +”ÂGÈBpós ÙI"è÷^” +Áz/Á Z—×ÈÅØ#“Àq}?«±Ø—ÆOÒï/ ¯kvG¯ÀéÚÀãÒ“‚‚¼KeŠn9G¹þ½ûlžV¾ñûD¡»
Æš${ñ »Á¡Fàá œ¥å®²yu3ò@0(îøeLË'ÑàldèP~Æ£– 5ÑYøЄ¶ò€X^Tš›Œ¬}»–};gì´—¾W›üÕçÂR4F¨Èá,YœŠç¶~¯s›n%nÁ•j› ;ÁÝÔã³{~Rù]#Ì*Ÿ2x÷3ÜϾ=¹f º/|×ÞNŸü[1¥?ëÅ[º¨¦ò/;&”H(¹%—Zù¬„Ùù™:ø(è畼¹s%e•— †±f ]ðXÃã{ü+?k©[VV@•€”Ž@ÈúL.®ó;†X³Ô*½Éî —t Ï q›o~ûôXÆåc5ÔñD„Žu¬¸/~3ºæ€Äé‰ ô»g÷*x_<\Ê´„éÌQ…4úÕD¡¶Èš
þó6;ÿž¶ÄF¨BšCâ¸H±Àd1UžMÙCÿúy)ôç
—L²ŽÖ7dŽIóA#>¢8íå ¨Ç ®@Ó¯¬ª0h$Cë ª†´Q“xÄ¡ZXþ* bKn]‡’'fðp ÀP[¥`MQ80/-ck[ sûS0Ž+îÓü'>Þí~×¼=T&h +ýžHOßÿÖø²s—5 +ž”²:‚¥ò +kŽÓ?2hÌ ¦-Û;bqviÖ€„ i1óøbܵ‰ßÊ/NY{þ}„œŸ‘€«¹„àÄƈÀJòòŸÙ;ïÅ KÕd1¡udYŠ5#¯Sç7Î%tá£Ö§³Gî®)$ä=–Ùšeó[fÓº;ÔÌI 9uT[‚}½\•žé/àã…«ÕXªusÖtÃÅã«6ž {M{z´$
×Û}*EYò™Ì–[“²˜/~ç-ð0h⇱°Éù˜x'^¢[~SPú'êD}^úšóŠ§pK-kì°4JAÊ©“jÙ¸ƒònõ9>DG ÃÅò™fvUz5žãÝ –néÿ€Áz± +ûðÊ„-ýùÛ fÊÛ[sc«¥pï-î Æ2i7cMÌFŠ þíö4D_½UÉü[y¿† ºÑt1³9”4*JfZtgu樓Àölg–Ê/ÉÜå±´‹…Rù»Ä#oÇœï…t„®&¿ß\èÒ*ëC¢9§äo•ô ûPÿ¡œ¿8@lõ³*¬•ïy\ÿ2¸EAìë6P/yŒÄº²dà(1 ùÚyà‡õ¥[ùYÓrO÷uãùÈù®¥†gÈ[ ÈÆ9Ùßz!<g1t8ªõ0$7 4…¿©‘Óÿ’ú@ψ±ÁËÓžwà(wÌd*”ï 賂ø§Í c±D†®] ÁÂóúŽLtWaû:ý`·“áuÝ{TˆmøV çLj¤¼ãS¡Á¨ZöÖ!ð}´öc¶£ÐÖ‚%}º›=‚}ecX +_¥2šå¡wÕÿ™xÛj(UqÆô©A Ò_ççF=PÜRækÈyyÈoº””Ô +é@qÖðq¦M0:bòƒœÜ™Å_ZÑßû£ýჱP(E;çnÛ +gk‡þ1@F«+FŸ Wæ†0!5Ã’„’€Š(Ö¹=–ï°óv”Faî÷²¢¸+ʯ›ß´ƒí.è ‘*$Ðå}@Ü fO…çÉ]s + æ´vPi«¼¦EÑ1†±«NȱÐøf |,¬Oõ««Y Ø +uMXSR77}À1¯ýiwÇ&”„5?ëJ€Bä/ü®ÕK¤Ýª‘1R r— jº„üƒ˜-]¤¥®ìÕ
'ä]ÛAb<P†¨áA%p=íÉ<ÍÄ¢G€EH‘VL`…É·aÎÉÕOŠ?>Q–q‡Æ¼Qu5“b!» G³¢##Ò<$¨TÊÏ&7ˆ¸ñ¤ãgÑÞÜ IÇ|åGô®¹bH5Ä"q†Æø +&÷kV(ø—ê6ÎÇÐœgTÀCyX¡&£ºn¾¤Þ¡ [P¹?o +ÚŸdÒRpyÓ'+šîq"Ï}È6»‹Ù‰‡&òz~ƒÜ׈6æw ªØÃ]â™ý¹N¥72@K€÷´ùrö’?ÍÞ¹=„‹‘Kwù( ‰ NuQî²ÞcµlеžNo“·,83… L(Ê=L÷*5aïEÆñx4\0^<ÊkÑ–8dѽg,U° N»a8ß'ª?] ®$6ºã=V÷\ ¸{F²[Ž' +ÇbÝÕmæ¦Nªw½O&È$I•y?US1Ç% †½!Ï€ƒ=† ü¡…”ï'ssWJO‹êéK€†iÉ +sA0ÏB‡šåûC,µ*ù‚«‚Dÿ‚TM"ëÆsÐq‹J<”ãg4Ô «Œzð +‰¥^!ÃŽ«\4.ïeÒª•3¯‘î5è[ßEOiÒÏ õˆtL·XµQ‘äߜ҃ +Ý&^,M½Ž™b)óJ$-%²sÃ2:úï$7A(^Àg|¯ÂqŸ?d;æKU =)ƒo¼ÃGÉrSúŠÚD¿ Ë]ææ.Û>´ó$hxWU¯ +w#AÃìiJÈ3Œ±,®Éü Ô·ËxoÕóþß™–ÈM‹r£·ÄöµÕ<X +MŒVýÍY»”´WóƒÆÄ#§æ*°ÜÚò¹UCþLW¨¼)d«é‡Í¶¼@Â#™L¶×eÒt ¼zà";ÇÅ¢¯½‚á>JD5°ö½Zö>ÜrÜ–{v8„«*ØÏ’ä!è*¯ªD¸àßÙ“«"£3·ï QUœ=P½[g
Ü‚LÖÊñÅ,ðv{Œÿš$p·ÃpƒWhÀòn)ú*ÔADóe-Ö®‰ öeç‚e¹ ZË'Â}a¨Sië\7ˆïx„|MÏJ¥»çl"ý¥
¸¢åùãe"o(=Ï%ÕךCàðT»/yÁrnÏÜB¬‡Œäá†ÃK]6st´ø¡~¨QűpeØ‚î µGcj ŽÁ4*1"éRl ¬ß[‰Ñ©p±ID̼§ã™ì +TjŠ•E{cù::#´ºƒëà»…^^¢ñÛè:©´='¯J^ØÚ“ÆAe_(}éšµn“&Þ$Ÿ)6 ÊqeºòO"oð„[ë’ë$P'4DETˆX¨ÑOŽ™—;¶©Àï^!é‡f¢uÎ:Pìó4T«ü‡ï³NÊÐfÚ“ÆW %¦ß?ÞBâ9>ñÝ“Åì‡öGŒè<~;}¢&ð=NËY“¡`ˆ*œXH—™ÃJím¾@ôœŠ2ó$q‹‡c“U!í{W0$Çe× ‰¡rìתØ3Èy«2Ag× Áú<cÍøZæé³´QRR´qG‰ÃælŽÃ³Ná÷
o.9 :Û'g–;zqú×Ìñ&VÁ*¨NTÊ°I +1<¤¾éEÇ£°m¬•G-«Ÿ+†G ñs9‘‘éØà4ôg‹î¨ÃäÀ&õºÓ'´Ø +ººg°šóî§L(b5 +ybPxƒº¬K|z$/°a·‰Y>)½u>Iæ.J‰•…÷ù ã¬sµÌJÇ)‚V¨zsÎ)€ +7ʽ¢—ÏžÂC<2!¡d¬}«!ñ+W‡>NeסLéœ bì–÷$ ò”‚Ë{W½ç:›i¦¸Yпü4·z»Ò‘ˆÀ“ŸX ʉàBÞaÃy3s á¹7qAEœFúsh5Ìž#Þ^Œ) šzÛŸ E³?)eͤ_µ€Š_ìB‘”ÕÀÑœ£§Y¨ŸÈ<’Òû¼~ïÄÙÄ6D@³cš éšGQµïææ@ʳ±³³1P:gƒÀ¦çÚ!2íê÷ÒVRFXp’þ6ÿÝFž¼ød‚ ܦʫ9 >²$»Zàã‰õÚÌý] 5«ßœú+ˆ#–3æÃä¯þ:‚Vÿî[úXº—Õü™iÌ +(ñæ#CÉ?-2ÇjœÑ¦ÎkéTçœäób]n)>¤.IÅgãæÖoË?` m,°ë M?³}§>€‘·?Q²`?™AF;|¢üÕ°üò¬¤J8†xÑ•àå ¾†Ë›âú+’ßÆòºI q Éí×ÐSÞ·_ü£…í‘ ~$å,ó>ÍŽ}ɬ+ö*²R—fj&9ŸÈk}Õ&h!ÃL +ü± ™ŽbEâøE†hæ8ByÙ\ÎB¶Hmer´Å,`¯ùÉDèÝ”“Àc¬5¸Ã? 34\gåýX¸GÔÌGLÉÑ(qbx¿àlÑ )ÿÀ!€$ÂECú‘b&]Ë"ÄZí&Šäþ)¥ŽÖšòšžòfôB;I¶¬œ +M‡e]ØÆ´ÐÆ»‰þ„çM%ÿùñÔµ´ŽÌ5 òuË•¯ý±€IçåæÉýÐ;¨ª?Ö–/!ŒÊN<ƒQ“ AɈ¯eñ–°©RZ±$x=b‰+0Ú• +ì«/À©¼¸ûáùéO Ö.7ðt [Ó¼¬] +jµù‚ÞÜèwÑNÔ ze&ï>)xúéD9j…ÉýßÅ4
_‘*çÈj h¸ú&îåÎ÷‰ûÖi½ +¹¥Ÿë‘¬PE¦Äg“¤÷ÏW·…¬h-äÁÎùÂÿá¤J(eîÓžš û¾Õþä°`HÜ>"—t·ÿÛg¹ö,rRYýTѬ‹YrÅ1˜
]ìëaV–ä’¹j 9×Wʵ(=ß >∼Ͳ Ý>¶?Ö™üðö I™¥÷»ÙÖü¡/©»>¨<–‡-7c™ézÓBY„ÛìWyÃÞ›-ûäóPÈ›‰îŒú+Ù‘ÚAÐôÉFiBÄ‘h`ÓJN¢».¨,’ ¯m¶yå6D¿QÆ·ŠaèYcq íðÝŠÎlØ?1ƒ‹¦gÇLðø!ÅÑ£¡¢=Q,çGV³éí]º ¨É©¹-¹TQÓj”*º2a þHÒû+lýLŽæi»"Æ Þ‚ýä§ó¾£ðü)÷ðÝüÔzï¢ÐÃùë¼w]B¶y»gL*Æ ®dQ=ÚïD@Mj?ò\˜#Þ<>ÑíÄÌõÂãKt\[p!ÿ)v:ãh¶ ùÏ Ì.˜J/Ž@l5¡U#Q¡t`èîªR{ G~ ;–ŸPòˆh#’øg=GŠ¬1 nÕkuÖ +öfš¸€ Ø"™ù ùq± E/¤Ÿ8ð` ï5“ܛֿ®[NüK4² }2ž–Âä}®E÷ ÜZœ}±| DŸÌ‘b0áLˆE¾íFh¥Á.xuÓ¨n<Üi%ìTãQ8ª½ÊÀÐf
×aò™ß¾SÕbnT&Ê £‰˜#-âý Âo…< sÛÐ9 B¢ õ¤ƒ†‡˜’`¼Ÿ†´ÔEkS¥Ëõëcn•ÊB`ç}C: žwÇj·;ý/ëàÅqÏÒ·°éú +/ÿVÕ”ÒöÕÎó2©‚ 0t¦ûDM@OIìT×sÌ»†µtÕÀF¿ÿAå 4j/Á3`]Æ©/‚r5c> tžIPûúšKs€¯|à‚ZõÊq`¯(O'¿ÑÌ–“»PJ’zª§~´|)¦_Ê>O•žÙ(Q™Æ˜Fž×oÎ}L8 ¬rFºÅÏö‰êªáOKÜ&¸€iÓûïHÕª%›€šò}ËkøÞ‚ðò)_ÈjuP¯‡&f_8wï.Ì5&¨yL8!øÜŒÏ:Ž¬QlLû½Ü©¸äkd ¿6Î÷4Ð0rÄÕ ¤M¤Ré+ä¿xÁ–u ýhMv3›hÚ)â¾|AS‰Rw?C½…Ûøè· í‰» øEǘ ¿†fZ¡éËAG“ +ÿµþ2¾oOÛ»81z¥¾>¡PR£3™ý&w9®¼» ‡ƒ]- +pÓ,4:þ2AC.:8CˆÀhϴƲ¶ïQˆ
ùd ò¿–@eîe¿Ãá ÌZ²žâu2*·zzðFªéld©÷w(X z2Ëž63͉åk`Þâ»]&Ó[¶ß˜1ÖÚâ¼-0?äòÛyA ´ˆÞ· Õ¿?1âUtãà^5ÞpÖüÿ&|håÀy6‘¡hMcN ‡jšAÒ²¯¾9rhßbÃbëü3B…:†¹ØŽSBîu žBò½-}Æ Çø ¥)yD¦½™‘åý°eúIy’ÌMI¤Ÿa ýhW÷óÆê§Î¾s‚¸¸½@ §1÷)Ÿ%ypûUí^xb¼ñý¼°Òì¦vx=“®¼¹A1 +`ÚCæÈv•´÷³_)œÆ~Xç`lƒºK±/h粧†‘› X㼺VùÍ7B:Éο|˜Kÿo»êîÐÍpÖÃ…_Cò= ï…÷ÛuÂ@ëñ.>dz]GÉòóÒÕæ!çÖÈ=[ãsI xTÿ/îKvPœŽvh5ÓVöËcõ^©Œx€ÂIŠ†²cËê¤gpë’LÄ4Žê.• â¨<òeñØ"Öå¾z› +Žˆ“ÌÍtøBk4Y-‹{HcÚúÑ|¸ðt¡‚¡SzœñÓþ£§üŸýÑ®bý™ýÖï}) •*;ó¼Ìé%ÃË v™±`@1n}£½:ñÉDOÜ|:ÝfÚÔ¶;†ínýÒX3í&à†¾=ÓÝs™§Pªºý»Œ“ß²ïV3ɧyÆÉÙ#“p:ÛÖ?Ö¤$ë@×”õ– +‹-?u@òˆÓ; IsÁÞOBR…Rë¾_;Ó_)÷cëI’““?ò,Þ²]&¢?D¦¿¾¹…TΉ¶#'¾&å„þ5âÎW, —je÷ï:bÝ•ØÝ›„ Ù¶Ñb5Z±mi‚÷‰ _z/¡ "[:û¢ÂÇÇÖ}ÇW´|ë«~ÆhÅÎ¥n9nz諦ûôiK5wBí{6m§Îܹz)Š‘¨þTò9&ÑɬY_Z£âÓèô3Rqó˜P•4¼ÆM´ +ª,[v÷®›üÇ ·C÷%BV\ÞTY±%0a^í€ÄµÎhst%
›r®²vFnåbÛôAÈÃ\NÌ_ÌÅfZp‘ œÈô´"'Ç®€”9ËâÕ{ùÊžéðºzd/Œ O. +ëšü‡ëÝ”°{á›ÎÚhPà\2#ÜE2 ŸäW›þپḾI„zy ÛoˆõUûË5 y[ÃÒÝmÑvW€ÏÑp¤›
Jð«G +ßÛqÄEKòb©+7±#Àè¿xLš›XÇú &ÌÑkr-Ça{½‚k”¤ryé=pºÇðE‰õUQ]Iaèãm1qnK»‚>©Ý±?C' Wss; ×?@œˆÀ–¼Û ² 5‰ZS”€Ø=¹Y4²8¼ðpVH…Ü"37ÓάaöÁö
:“‹N 9ƶ u8µå®ÚЙLå9q— +ŽpØ*ê‰ÛI•Õ\òPê‡ÌºÌÁS”ývLQ Ëæf ]K‡ï¹tñœØùê4Õçkת‹÷NG¹IäÈh&(!ÃDç†_Ôç {zHO. ++ â= ZÛyDÕ …tDÆ sçºLä~˜—d8ðŒ
à7 »x‘D(š|ó\Z‹þ€ñ*c#ììQÞîùûř鄦Y°cƒ©µ–q, 70ü¥e1îÚ¨˜ÿ.
¦ðÈ5I6²”ÄeK xßh+W—õ\R”Ò²2 ®aãOÁߢÿD!_xûÎÙ§¼‚’ÑCÍJq=f> o›AJÓœ CåuØÞ0÷žRé«g¹ÃT©ƒ_g ròŸ4J?ƒ4A€zzzzñ QÍ™ÖÔ‰ôîF¸mÂPDfœ&†ŠüWÐbj&Âà'É°$çN0~{ÔÒþô¤A² Øeà¸jé|™¥wVÕ ¬/Xú)=!Q¥oµï F^ºË×,wof쇨cI¢‚ÞÌ∠BD%¥²ÖD®ûˆ.+ö7ˆírGhÌÑÐb6‚Õb‡P„fJæ•Uà‡*—Oë#`3Iâ„ ë +±Î¯ é[>thµáX ^ jŽÓS&°;‘ca¯Ž'¢Féx Íøۅʦ§¯å`½YŠ#å³ßŸÑð÷N´5d×Ì —{^Œýèä +:± +eZŸ‹‡z{¹úìAY9·úªt"ìá3îÚâú]"Ž€¯ì‚^±¥eÅ_©üÔŒùá4¼YæT«“ôu8 +3éŠÜÙ~\mi. é¡@é{<¼ôò‡ùùCœ£ÜùœGõ¤« ÁÈÓ‹«Ž ä/¬Ú±©ß{‚mÐŽúæ]æ¼8
Qü”$L/4øæ20f¨5)âr/h^*åå3jýâ%°EÈÕªv
¸°i¿ÀïS ">*Æ} ¥Ã¼ +©XÂÒ±ÍdbX$¡gýÀZ ˆÀ @zUõ¡cû A ORq*fÄï17(ÎA¾‘_Ó«d®ÿDY\ƒ$f_z|äf¤‘°ãF+X
Èa¬½
xŸfº¦pÞqy6æwËGz£i£!m"dþ‰1 t#¦ã¬Ÿy6ÐuòM¤³):“ caðPåïÞÄD½aK!1›ÛtãŽÄzŒk[õævU÷; +dê_
ñ0µº4£‚×ô¼öU ¥ºüWˆ§WWÎ&˜\ͧLÚþ¡u0ÿà›k¸ŸV£uòò‚½$+Ruë4 +¢Õ#s³j°ÌòÞó¤ââL[¬>ê¾Â}øª¦>Õ_¢BµÞO¾û<Eèüq†GÚ{(ÎÂÎÛÈ# JŠ£êx%*ËÊ$±ýqÚ1À±žÉ> ¸±K@¦ÃüD²jL–÷÷ÒmMÑj‹l VÎ[(å6xþ;ûA¦½!ÁV…:uùÚ-9z¡xõá*?ãž*bÀ‘Ä ÆE4IäònÁGjsŒ” +7mÀz6ä¬ËM@©0j7ÿ‹Â=³hfk¾–?Yƒ§nÈ‘G˜ÐØƆÊêbÈïŸqà ìøâ1g“‚V¹_úi8K‘H Â+íd ΋Ó9‹×Lhd0q³8ºFœ¼÷ПwûÙ^WÙèÙ¥ß¼Í ó FÕ-z=TÖ‘£9ôtþ‡†(’}þ.»²Ùì +ùk8Ê—Pë|ÛmGC´1RÏ@r÷\»Ú2¾7FaÇÞ@÷0øèvmô ”<ø®ª^êÆj •èùOôúÑkr³YË`œãï×¥ébýÅ +N‡êÕSs~D–¼¹hdê©ÉMâ É\ˆã»=·˜ë„J³LÙdÑgßn.åe„¹Ž¯á Üz9Å "O2
ɲ:`“D
‰?zACK–"ÄéšØ>ê› mÒ¸ÀAjûëÖßsÙÌÙa‹‚ñG%V=DHÕ\Ç¡ÂsópñƒÇºï-æÔlb §™™S—~ZÅÿ|&xï7iI¸ˆb%ÆYÁØRCâ¸uÎíýµ×áùè@+êlëøKìz}6¶ Ø‡Ñ´è ƒÕ*n‹äjž®|/q^¾V^çà"‚°¦ÒNwm†ZÈQ›£`âИ À»~@Æ2òE1K¶bÔ¡³‡zkÕ0 žwíËcÓ/7cN×/óçèÔ?‰¨>à‹]Ä_Æ™©¦a,~¬Œ9F/<1»ÖìCÀ”W„bQoa5 *€kA¡Þ…œÏð<\sz oSÃÝÐÓÑ0 £@‘y>*ÖC59®L%ºû—êÆ®ýŽÚYH¦Ü¹„idS;Õô¯&ud0 ÒÕ>írÐ%áG,6ÀÄ‚°íôß.ly ÷B¨=TT(E&æy +kµ4ýðu&¿yŸ¸Å 8‚¤,óЮ²ÁµùÕÚÏðóV§p: +™èãiô*¾}x 2
‹yk8!}&®Š¬ 1äxÛ…¬(< |t{À5:Ú8Ú*Áòݘì°wõ Z‡
Á 863²Tц8H<Ú<óEf…Ðr:EM‰Í«å;â+ÐíÊÍ}2FHYˆë'\“¸p²Ò±:ÿ¡&w-ÿÄÇtt‘`ÕnNdQ柵3·#{llºvY8—,Ò#á»5‚oÁQ|>0’ ™‘óÓZ-æ¸"HÿJˆ@Ćy‰e(+êº?Ya- Å:‰
U&RU~y–‰r
Çø¤L +`@$²ÿV9ð¤;¤ùξt ¶QƒÊyK† î}[?ĺ¿ÏPãÞ«ý«TG€Cv_“…‘µ[×¢*`櫆DU¬`)ˆB扽8ÖDh,*žvU +Ê*¬õ0U!l#é‚B¿2ÿ + Ø• áž3Å
á¯'Þ:Õ`é)ÆË}g¿.v|u`ÆlrsñÛ/—ƒ‰[–'»eTÏaï,޺ЂM“ BI"Mêå¨+› ‚ ¤‰¤«'g˜Õ|r§}þ]¡Ã7jc´ê¦Ó¡?i"¥ÎQô…!’ò48×Æ +¢D¯:àì‡qÄ2‰™#h ~ÑèöµSŸm?x¢=HÔ7:÷"öl«X9å·ÊM¹&•Û¤Kœ0æG#´ð/sÌ3ç=ØŽQeWgýïÊÎÕVú
6¡úˆž[
$åò„ ˆéˤ¡nM|´Ï79,
}Y'kYÕ;ŸÐ±ÒÜÐ1BæD3 "§Ùy»Ôô®¹oþž3ç¼t‹Ô1ÄuÀ pn aÂÆ'ÿB&]$U-œ$À¸ »B>M31{;uÐ +' +;³P,ÂåɈàçOµ·³UçF’4íjeÒòš ï@§o\• ½/Ç‹d d('CÑéN©Å€K²ošJ¢Sò!¸ÈÙXß)FÓÒΦגêÙ.öô=.²vRì"·òR×AƉÿkŠÍºˆ~nŸª ø ’Ñ÷/™GüÜ|ÕˆÕ£kdÆÚ,aŒJŲØKZ.ð™øœJÂÌ »zÁó¤}XëX
ΘòœdaG¨‡”N°Cѵ³6/º]–wrS™<ýq‰#bíu5ñ÷Ø=nëÝÙ d{¿¤ÚøÒÀ€y.pOØS£óhŸÙtÝK‹˜@àªÇ6»«¹ÙXöíÉÛÜvú`›ªw +/µ@ŠCªÐ˜v¶ x {cÐN¯›ù{fÁ€Â¥Ë³‹hæ-¹I°eE™Ä4¡`Íæ|bÊ»KUr²¿pZ"’8yó”ÅÆe7Ü7È–ígKø@ +Ô¼àäF×àòb{†ûëñï·Ü¶\KC‹·²B¾¬â‘D]–Û
Ff…‡Œ¦é³Ýí{èâ² + &#ˆ˜'¶¸"+ÕClR¬¬Ñ9–ZjJHnöE£Q¤¯táÕ t0@Xa-¥Ç-÷bôtŸ ïG÷ŸNÞ‰ ÍáØcŠVô¿;Õ'¨!Vwã¢W¼œ•=¥×ij7è ß¼óGÂb<c™…'ôû[m{§ç›M)¿Óã"Ðè¢
“ CÕ¶¸<Í2—Ž¡¬àv+H(3Æ +½é‹úºZt§€Õ¾0;Æ!çËS}FŒþ”Q¼Y o÷{ÆåF[¯`*çƒ\“òôÛ¥ôŒ3f_[ëG¶qÔÊö GiÆ?¢™îóµµµw$- 6_%ÇÔcït‚“4QGt*§ADðª·.öO(Áúå÷8² 6 ¢9„6¿Lmä.~4rwé΀%gDm @Ø5=TT㟳ré˜Ýá¬.ò¾*!ëŽ
š§Ð_×1¶káýǽ·Ò×Ìå™ÿ³ E_3]]̲Qž× ¶Yù-´´¤_Û®È"™N;“Ý›pÒUÇïć”RÒ ½|I3ºÐ ~½–eƉÍÅ4gY¢8þ,”p[Ÿ‹»(>'
qÓ¥=§Ò18p²A.8¶ ñÙou§nV%pz5D–‡è’¥0XQø6†¿±ó¦Ú^áÍPþqJÒ ”Q²U1ÇÕš.cûDcÆUÜhEô]>‹+{<û‘ýÆË£¸b“·u³ªáðŸ™W$•dø“D/–Ø£î+ËìÆêÔž5]¥L8uœ@¨÷%R ‡kŸ©sä3Na›X7ŸA¼.³£Éca¸ôs R§Übõ’ g…Ñ/Ì÷Ïí{"qZ:€;]ñŠ"ÜÕ
°Š];J@Ñì< +µ#.W8/Qa8ú ™;éê9SòÁ ÚvJúz{
Ë!Ê wÚèÖÉõí5ˆËQ‰ßf‹¿¼Æœ`*/ØÀüYœ r Æœî•/“?C4IÑš|]\÷»ˆˆ1M»Ù˜´Ó'^+FÑí¡aFê´c³§äÁP“ñ´ÿ¸xjkÕJCâ¾8 ¯|0ŽÌ|ýG…ܱÕs•g]í¢»E/Â~a6ÒNå6r{¥¢Ò…`—²ºð¨Ê él›#ÖIô °-‹ëŽù>Œcƒ +ÉT{Ã=·Ù˜@@ÂS/ E~x?7£PÉ[•¤nöóZ‚§zÐáA‚<‰Õ!ÈíqKÈ „¨*>S²ëB˜^‰DZÐ ãfàà° +„sÊF·¹³ŒKMöÞ*ÿûô~ô˜Öò3 +ú61ŸPoM†c˜ G77ü +2œœ±ÇˆÒ£ÔÁ€=7óüdãøãn=£éHYšŒ|†,à[Á9V+(¥™ƒîÒ³Ú"I%ìBô€U#¿¿öÍÈã·éááöxioØàúHeË +6¹Ôça O½Š¨ÿ4oC“w«ó ¥”0_9§U
8”‹Ó•_ò]Ñ#ò”jœ,AZÇ«º¿°g¹[OQ\¦ïÉÉ܉òw¬)WÓþG—ÿXN ®´¯FÒäûß @Èú(°g#F]öDðÚ>‰«‡§Ù>3—óç\ŸÊ}lBÝ#¨ÙÅ8¹Æ2]Ÿäý'™‚2¦: ”÷gÒp2Wš}öXÜÙJC¼ˆz‰{ È Ýÿ
ƒg«¹Ü¸éEDV1JY{3ÒÀ2Ðê@/KÞ%Hjä#’o:h”q\¡¹RK¦˜ÙÖ5H¢½HÍÂw3F=ÿÀ5y4eÑ„ ËÄ´K¯g PX‰y[|l>¹^å õ:Mæ.pM_ÄÁù)A X}ø5LÌ÷*Ü$©@ ‰ß&°¶Áºš]™Ë;šÑ A50ÚÿÊ¥Ð_Ì€¶U➇4<ópKbûÃÙŸl±å¤™ ôÿ:Z¥ã<p=]ÖsÊ0ŸþÎøÂàT Ü—G“x¬<ì;¸p/ù‡Ôë
ÚðßC×?(YN/eò¢ÇwɳBn†¦nF„¤$Ÿü#mÈî‹[_]Ý|ÞKo<S<EäâŠ@³\z"É|üÐLáJ™;s½ƒˆ‰‘? p´•²i/êM#©mì–¼$G‘M” —C“ðŒ÷Û)V¬Ž×»Ý£ö‡ÚléÐ3t‡2.ÅØJ<?WH² ¿&±Ä»õwuÔh-Äa“íššÕñôÆ`Cd^Y-o묟oûÞÇ$Ô”G¥4Z•wöúû%¼Ùµ&Žªü=!q\ ÖÇä&ýó=úùþ (@\up½Ž-8ç¡ÎSe/5ölÀÔéf*þÇU)/S +œ $& 9[ÇÃõDÖÄÖÄS-Oy ‹%¾Ìfö¼‡5cÅN't‰þÏwíÂA AIêÞM-kǼÎÞcÊ#¯ô~ +ÿYù—z$Ùz·–é{öQ-à.2ˆ9+[hfªrwèÖž´u/S¼è…ÔUUØÒ\·ÛoÑGÉîK +6ÛÄ +‚ŒÅäòm˜QlnF +¤®°%0n„På_ŽÕê–ge »iÅê:Ézi—9^BúfvÞXÂÈ£v%Â`’×Ð?VÊ‹Ï ‰¶-¥gŒÆŸBôïÆ€oª5ïßÿmª‰-ƒ¬ Éje¨n™Õ‚³j®Ü§æépjÍü%ˆ2ä 5ù'M©£Oû»‡Q âB7èg>jQ>¥ÈûÄu›¶í õÈB´ùˆuùíö‰ü9™’å&•N:èq‰Ü2vó‡‡Z(i œ¬cüªpïOÏ="páI{BÛË@àR4™Îþ^}>+ú Vq´fNù„`½íŒÔKx; ôj¯ +SI4+œTZqg(?ËÚwÑl®š%¬®¡ ³×(†4fÉ©Ÿ¢fïWÊÄ9/0å_$ï4ë +¹üHðú\ýcªXTÙ‚Rr±Ä@•Ö[6·Õ¯B;Ï“íÜW"6^šFx‘-±)Ù]ÖSv,yl»Ü|˜ÙX È°7jèûè½D@ÓÌg x©g’TüaÑu—Ec»x›š1–«OõιþDƈ[@0®‘ÍÜ +¤p»9{–ÙÈêi®zåKàN±+ qs;]²YËê1uXt3—ê³Dàúuÿ^ezõýÎ,•Œ¯Ø]Š_ð°?@kmJ›¡ÿ8€BíÐ(N:8È´gδ¡ä蓼küÎYi‘ïÉb¦`V-&ž9%Ã÷„mŒå¦Q$$¸ÐÛšO¥,$Ìþ@ÿÏ>¨Ûïf¤ÁÉ%†ök2}ñ +y½ÝÁþÎT6™x12†#ôQuªúÐPŽ ÷_¹u`.¾¼Mð€'eG`?F=/_r„J«Ì tè,³¾/‘”iŠá'$h ×lh¶££‡Yþ«ZGgW¤)¡¨ä @Uâ§$WnÐÿ»5wîØá®ÆãåæÑ€´]x}…–2e±Z.‚
_!f;›Œª»Èй’Ú…·Ë£ÈÜ%#]ÈÈ~w£á¼‘Kˆ@ý‘»ôr 3FáP˜Pݾܼ« —ñÚ¨t +z] +›¡×YQ.˜{¤7Ê+°Ïvå5èmüQÁOà·L¤™Ý ²íI·H 6ü!¦ÎéÅ[ûª˜?>ड़•¢qñÜuç嶴¤0ä1ãwt¢É©ÌMì‘ÏÚì»g¦°†Þ\¼û-Ù—4ˆØ‰+Á|ØÁY¨à’†k :‡_[¬ €ý›E‚ + ûÇ9—cc€Oä3|ì$ kVHŽ^ãAù<²…«å9ëá;FÚ43æÔ¾lXɃUŠÕÉm&÷A1I PÆöHp7j])®ß~b—pöqdæ/ïR~.$•Þð« þ@,ç;ľO9 ü啧-\ï^Î8n¬O¿¨ä½N÷N#·wQìùU›h”2D0œune·êöÉ(*.Ðcæ`ÛÐào„ïæY·\1[Ê;¾ƒ,mècߌA¾Œum®?£ ú>˜o_ Ñ )óÔ\ËKì$¼z‡S¶.Õì:dôòîñ”P~¬¶•®ÌÖ—ËÔä£ +E•ÉoÏl7ò¡v&%«s£ÈëØl°ýcµé~Õ¡\ÑNRÕÆq“؆;륢6:›y›ßì‡UTk¥@nŒaìI R¨^™ro3[‹°Æž m]KÈgK<\iô ¿1K4Òcg¸Qüþÿ¶#žêrl„·œ†\/¾¥O:^†²(J±<•\©d¦n«ÜÊßAiqpËîÿ¯õ‰Z¿ê48\²ÑÄÆÏxYàµeÞ€X/_*ƒh;é‘ÊäA ëÆêZ•C]ÿ¬X÷°ŠuàV£Ø+÷Ý1 ʼns¬Â>1 +?PÆ`Xÿ/DU|8ÿî ºmЫݕ³>Œ7£ï œ/ä€f]e{•hA¹›!æÙݳ|´ ¨VM¾Ý‹öwS¸ðct/Dè0sÈ à,:Ð0l<ÿ¢ì"£`•Sô4c³B;RLË0ÓXc¡ˆÏ÷eœ2myÉUÏKAJehöÉÇp»wGR¹t<\ôÅsD@sb òIöÊ•Ä(ƒögÔñwåJÜaf¯s â«óÔ¡à /ZŽ<lÅ› ݯ¼¡s%0}Â3¡
V¾¶0ë-‰¾\-Eúu™)£¾Ç6*…#ÒÀjH™ð [å)?,+¤Ã^/CG¡%rÕK¨ºR5Uˆóú‰è>ÐO¶iuÑ7Oö€¬m_Háí£Ø¼ Äm‡pz0€MÛ1ÜFÙI·œý¼`Âüö”¾ˆ÷ê+ìç£W~lKà ˜©*ä{öFè+±ÅûlTËÌè/ à(¹ª‰¤üÑ $O9R¼+Žòü‰àÃ$;y.ÙeŽVwÄ™YIÝKáI¸æù=Ÿ"7=ø¦uÈ(è¶Ñ‘‹ÃÍÍ+;ÑEO|û¢Èz8/†o|Ÿ¦ä›=Ž±}ëMK +‡â UžÆ +ùÆp«‹:ËkÅ€®R®`NÙä½*š½ÌnçC~Äæñ3BÝz_¤ÑsìIõQ‚ÆÀ4ãøFÕ«¾íˆ*ž ’Èbú(Í€~²rŠßõÎ~ÖÝ<“‚Ä;\ÏÐÙÚ#á->;â«(‘ø Ià ‹Ä9+6³<AÉïYþy3ÿÐߘØl öòH[àP
é B˜ë34S—ùÕ€ Qi¼õÞyÉób
uŽ1iG‰: ¡á!³/à(û2€êÙ;<å>ܺԗß,!²ƒÝ¹g—¨Ê¦_ 1ÛžTÛg~ŠXZq]Ð!s(ñÖ)x)9¼ü ÑX ´¯a›µœôÌ\kN‘K +AΛëi«‡ñ¾†SQú +×P`).ù‚0ûà +mÞŸ¦‹ƒ¸âþIŽþ´úÒÈ…Ð?{1ú¥* +´„#ÆàëŽmcí² ä3pU2Î29Õžà.æX*ËfŒŽàÕœ1Ý5Ž§ç%²ùçGX!¿³A’¥š^»óÏ ¢çŽáú¼›Çæ[„Íëç<2µ<_ε ø¶‚¿ ÊWž$°ÅP}hç&7óë6殆¾ç«öÃjè<èèAÿ"m±¤/¹èT~¼ ¿Þ6‹Ë J÷`>™.–4mMæÞ|š¥¾gí¼ Js¹ €`ŒúÌu€RJdäÀš
J\a +aÓضë™5%ⲿ°—™ŽkÒ6
Žˆ]Ä‚@yF¶B[;£4¯N>âIبq&ÀÛxaC*G»°û=¨žôü>hrz +«Š›(ùmøYÈ5nnðë¢-¢O×ùVÖsÞQ¥ÈÒ(±kO£]+\`¸#*ú~<R¨j ÞïNÊÕ[’ “ýzFó³ö@=B¼]NW4úŒîÌ:äe §
)q1Td—K/2{ð¸.!™¼}2Êî^1´*|iè„v@¹Þš‰5,<HŸjɉ=´g]~›µÈ[JØíëþ~øÎi?Å‚©„Ö^fÞ ÑÐ_‡Ôk °7..ŸÏò7ÙÆQ†øV‰9 +Aáªï¦¯W›j¨fô²³zԹǷÃß~W~%µ©.e>p Ò¢È[¾–žÊ ¶Úr«wxéo®‘ð¯6i>=´‰€ÐÍÃ9ðBÆA‚ Üwwà“¨A‹²waàÌ!àš™í÷¢ÈÉ.v€ +÷WÁ¥ÊÔø4´šMã†Gìºâ<o +/ág²¢¾›‰žÜ½,B€ÌÊMêsLå;Ä?•&o•ôÑ'¢sãb$u`«¬GªÓ?˪“
Âaô @f mÀsÝ,4hßO4ÞúÔÙz¶jýxžF;“a}`è#¯ÑN¯ÝñE€1b×Ãœ¯”Ç€#úÚb%-Ö™‚Ñ–ç®C& &™ØãÉ×W¸¤ô vƒ5#m +½G|ôÖ…¢ÔoûLe·c¤ÊÅ㼪[&t³ÑwKïÆ˳]ЖF郻XqÇèÏ• ïÓœ»Æ>¤=ntät\ÕÙôaù~KàµyÞ”tÿä\'ò Ü–Xòoú¥€[ÞáÞ€¼±5UmÇÓ¹·ªn³§^
Xq—ù£rœ¡—4 ?+oÃr¬¾„ú„qA)ŠÂ¤R°ÕòWAc0Pý ÅrZv¬i–&ˆ-碳=(G"»ŒI$‰$ÂöAáA¡}Æ{ÉÌlÅð¤¸+Àg|/¤ÍfÇKŒ]ð$qì5šÖ÷X¤ Îç/yÃFà ?1üï@Û^žxn.¾Áæþy“UV +±“s‚õ+¸M;~È=~°ìûae(,ŒýÃü_2þJuk®»Y7²“½KË÷¹®d`ÉIU˜»Ú€.ý„hµU
*ð}y +ª ÜÈ´¾~ ~@žY[ ûŒ38ïç‰Z¨îÉD4b‹@†RÏãssa}cN7È‘Š¸ Ö.¬)vÊœ4amaÑq”<ª<ÓH„µØÿ©loNÚiøû P
dÇmOˆA+Ô·¿b<qÏ|Ë$¸m.RÈ òÆôžŸéîÄ¥YÊQþƒÇöªÛ¤ÀU4Î +,‡H
Åú ªò" ` d¡7cœo5c" +§Ì%åË5 ÆÀu/%ùm Õúñ1¹¢@f 6rmŽ³Õò±Ã õ‘@$öu3¥3c1ÀwÌ0‹€÷û¾Qݨ›?â1ÿÙÔ¶ïPTf";×¹·nà }X›¢í¶ã”átD}NIgo,¶é ‡¬¡2°Kf¦»O UE¯×éG³íºoI%‘Š `©ô>dÎEDaaïÒì(7“®Ñ&æÜŽ½ÑëkÌ ï§ í€ƒ‰†·`iðAnÎm&ȉ=ö)O2,Àó°²Ü· 6·‚¬=é«!—4z+»(N׸uņ'Û¿Û” êÙÙ,ОwØöEUdáÈ(Iω⪫ +õÑoÏuÜŒX‹È…ŸšÂy¤Åë°„ËOq:tWﻀU¿>¡¼§ Â]7,Ñ|%p%|£$e*>ÿh*aK6˜{\ ÈÚåä°AÙ¨‰H +æ^RdÃgšÌñ»w¢î j¾5ñÆ*ø@Æ./¢~[á , 5Øÿ8óí$„o)êp–¢³W¿ 8öv˜#x-_ômÉ䨴¶€InÍÚÒ@ú
/Η1ðpO/ž¬¹ŒÏçij™F;Tê&ߊ¯gÔDO¿ÐW2,iT‚z¿&âÇ +‚ìH;u»ðÞh3šØ›µ`œKÐÓ‹ßS¤hûƒ:jEýÌ—. ŸJ {ÿÂÖ/ o_K7ºÓƒð%×pë st|±µ,[òæt‚ÏÙOo‹~°ÕÒ·(r‹»,C’žº%ö$}0‹)s Œ©0†R:_˜?†í€:¡§§®’ ¾™ózçŽgŽl]غ~—שڶ•P†iõü0òç ápèc|ƒètß¹Œ:@õSj³bÇj7â¦ø4ÜVOÿ3¾ÃDTŒ¤I_ŽÒmœv³°E2„ÖiŸ åß¹s~Ö 4Pg—‹ï'Åù=ºµGíGŽÞ—'ýÏa1]E°×oÑT“OOyÆ Õ
°c&7–NáÊw + }«yb ß´ êÀ¯ºåƒT +†Š>ʶµ¸{‘Xó’ +¾“¸{2>/úçñb{‚uã Ö7ʳJƒ·ÊMõs®îì#ØÏô>eÓGÁ‰G¾ZðaX;#˼ûþZÎ0iWj ÁЦ·Š%k6Ã4 ï\ñæM¿®l—°–@ç ABq^Ÿ
0™awXùsùþŠ_}¦’t3' +r …Ú Ñê“l¬÷1&Ôî7è
Âõ‡è.QŽ î)`&TŽýý"úû+YÉ[´º$ª Ë$3K2@ÑiÝŽ4“<UŸ¶ÕzŽ<Zª )q.òÃlcƒ×ä;f ÕÕ[ê€\1;X»22V† +Þ +’›o&ù2Íy%g—¥ål30^K´¼9ƒm‰ ›•+š¤© ©ðšë ö·mëˆi˜2c“Þ9cqÏ¡B223rBéàV¬juȲf붌”¶·£8Øg~ÿõùü̹.U€¯ò;ð~>G¬½5q‰þã½w<ª4rPÛèlšN¢tÖ{^ qÚÖv3¥‘ÖŠgÑGj«—âPêÐùi¢—³c€©³
:Møëp/Ç0àOUZXlÙô +9>šÌÖ)6µ%—Þ ÑëÆóö ïñ«
¯4zð•ãŸÈ
󒃶 +@*O¼èrŸ†âãË ñó‹?çÍ?º°µËKºôÅ÷£Øƒ +Zg{ Bvˆ§¦— œ¯ôÇ碎›)ž Ð<¡¿ê®é †ÖspÄÂJqɱ‘XBhXU.OyP×òP›û'0ºmàf…¨¨ wBî%Õ5àËõR~ÿC«&<þ©{‰s CTêw¬ÄÆN²)89<t $äÔˆbš*²oef9–2¹ž§I‹>yK8§C•Îõ™â‚½ÚÉ&®¨µ‹Rª»º g85ìnìŽ §Òî9yßÍL®Ä.ë! Àšw}ºôèiéfÿ +ÂB-{Dƒ›9‹h¢›$=&ˉ#™ÞÎ¥ÎÓ&|ˆG#æ’ÒéŸyÞu˜ê}C7ï®ì#F9zÍ(›Ô¶ç†‹áÎnº‚¬a1m}†–5Å> h²GçñV Û2qÏ2›Ii;¤æ ÓEz¯VÙ>ÅÜØ6¤bV+àŒü€Uª.ß¾[ˆ1Gö¸n„Ç°—¦Xðæe‡bíý±ih²z2}¡¦ãÔöô®ø'ö»PÆôãZøëM¸ ]5/y~¼‹z‘Î>š”“.pË|²}¡xß i‚M$+‚ÿ" +ë|ÛŠd\lÃüh󲽯³qO†T€÷ikÈCtÄy™Pz„-¼ÑVÙ´ŒæçÉ80½‹Î–ÄÕ ++Ûnù¥)âî¸6SR‘ +§J¹úÀjPLù Bë@}ˆ™P€yŒ’ia…aÝÅdv”Âþ£›1Ö VÐ
0ISeùg.¾- å®$©~‡°Œ[ÁÈ©@Ûk™‚[Åï Z‹`¶gëþÛÒˆÞ‚gPFV‚ŽÑWkˆ!pæo>nHB$mÒdûi! …ˆJ:)맑$†Û;H»àømò?MÔ_ûÒ›xÎp‰¤`ÞdtPD*Ü’?FN^@voþ³|Ån'许Q=À6Ûû½Â€vÉÕa1¥6îdpÒM½3‰AîÊ
6eÊZ๜oÄí2u¦+`TÐo„Àë@ÿ¤Ô+ .ö rˆŽB—(Ÿ8ŸGYtïç`R“ê!·LUE®Çõ›ÙI‰5ñŽTmþ„ò„E'l=f‹QuE‰Z ^¼Z=Ñ7”!S&f®¶…bÔPV Åæ1•Hu7š¦¾Ã}G=¼½Â∠\‰TN÷(Ô~á²W9W…GöàÀúÓü0þ½‡z’YÿØÁEãv¾kä4qðï°¸àKéÅiç윅7Ð’ÒZ=ª—ÓÀq—ßI9 Îrµº2ÝjøÄgÎìÀgQ£¢¹RHŽ®]¹–v +=j ãgJ¶··½ÈëmУ]dó%›DŸâ +Az`0òGçÞõ" 67'yW‰Œ(@ZœßúK1<uÑJ€è¬äk7Läv›õ“‚[“Ò!9úÞ¡ÈHþ +óàŽ&NCË_ó¼suøô²ã¤ +f´¹),Ø°jÐØ’²uƒø©´ÿ])ÀüyAN7~>–ñ†…
‰¦(@ +ŠMo/鸷‹¢Óá– e\ ÝJHüZª†é•¿ þ.Úûq<Ã:rþTÀE³¥ÅF1‚eJ$ £h¹BV;ˆq +5íªgã©É—Ž^î[Wÿ\´üš'fI±¹pÞþ`*ÒµÕåç@îÜV–^ÔáÈZs¸q jX§%=H ´%õ•–³rãàÊ6Ÿ¼NA½š˜•ÖŽáÓOkÐôo0æÈñìŽÊ’ o<Sɹ¤‘,uGàý±•?|ò2Ð=0„dÓ3Lø†DÿRC˜[Ó·rÂU~\è†^•™;ö ÍLŒÉËÐÌÜ4ßdç±vwÑïa7:•ÑE5µNžs §µ¾G'8 ÿReŠúsJ$ÛùÏ*þ6µª|I6 Ä~‰Â†úé“PÛëò] ðxs÷ÇS68Ÿü` •€±mG ݦæ#¦òq +!Žó%à³Cóî¥Ç›LN ± ´Ãæ©1,Ïv ¼Œ/X¹·O(ïO‰«k_AÇm°x?z‡Î +ö µùC¯H;Écê„ô¨G ÔÇî«3[˜,½bãàÑ\ûMø¤ML÷ )û¶Bq"¦pÞ¯ÝpUÔ¹}ÿ”YÒdÝÆþü‚ç±xc`„²?ÐÔW›«â.è•á"G¹¦›Eß61‚EÐN3Lá×Är\ *ñÆæÍG‹Ý£ŒNIÍ2g×Áê°®HO¢V gf‹ +˜“燉ƒþ@‡ Úf +ö÷–¾õ 3ÒFç\¥„ÀŠVZ z0.”摱 žt#v Õ]ÖÿŠh$(l6nϬH`ø"òÎÝŸ—à;`6i~o¥ Nç
4ß’Ç׊ß1‹3A_×à¨E'[ê„0³Ã¦_ôÌ*ÉßY8•ë¤ê;w5‹©Ün®åХ͵W‚ј¿³ÄG.kæ’»²°®®&±üæò,ÝÐýœõ¶± ÕÊ›Ü*V \Ê3‹¦¾qÉwh*úg}ÞédÓf¨$$E6à×íú ûÍ“í¤½HòhW²G„2›g¡b¬6ñ
û¥(®©º%§•’ ÉՀƒ\_Â>·_ + Áïl†FöK>”‡KñkG.|Fà™†É`öìP™¢ËëøΊƒW¯fjÛß8™’Ľ–äÿômqèù +¬ZôPƒ†^L°Ë«î?xÚ`Fï:¾ÉðCÏÜšÐ?^v?v&?jûI«^¤0'ù°¶D±“HîkœOÞ·ý°¾e*PP(¸{:¬‹<;ÑtGûd^0Ghyªd}…ÞmU <ñ‡Q¿œ™7þŠ,ªH³ Y»Á˜àš”; a1œ£TÐQï]õw¨+-oVÏç5ÁÞiläR€§QÓå/ZéZmYX¦¸™ƒ Ó~U”\žœ´ né‹R änV·Öq¨ò]_• Ú›Êky5,}J¨Á3!üj–ú‹â½üÏ‘´TÌÏ¡ír‚–> {<I vHŠØ“ÊxRÜ :Å?/õA¤s á4}çJäõà&ö®ÌK‘+‡
ùÊš«ãõÞÚô~L|á¶þürÇØ¡ð¾öÏýüÕóï…qMö¬ Â'7½ø ÏþQ’ùÛ
æ]©•( NguÁRÅƤÇU’ž¡+^hæUÜ1´yyÌLô + {”\v§fÀ[^üßY›Êf¸þä £]âù•X—“‘nh¾í^r,Ù+ ³Ùî4òY0ÇÏËY0ü^`Î%U—eUžÇP—¢Ûq]9Œ²éØó±J÷üõ9€çÓ Ym{j¸ÖR—“Q° %cIlþ(T›ç|͈”ÜrŒ=v³“¼ {s„ n·¦vZª:Ǻ Ûÿ’œ©ÃAO˜áoššõÖÞa5¯”ñ„Â_]æ#SAhÊ…YæQ‡Cõ›Iƈb ØeÍÝKÝajQ\ FWœ~;¸DáMÄA PæÎÎN³‡ï(e:»nð„i@Ç›
þ”º$Î]AV‰™´nŸ÷oSã™@Þð‰lðÇ¿f2ÅÚá@l d4rÐ? %7RÝ-t›Íf@ƒ/ó·Ša½Æ ê U»d ܳü*÷Ž@ï6æ\ÎF|ûÕÒ‹±B6Ñ~]›-d¨ Ú”•†N]…q!"º2zo1ÑP'äÊZ‡Ö®T¨gš¦älq½ÌÎÄc]½‰Ìß,*¦¹Ü›WÆk ¡
@¶Yƒ„aŒº"‰ ˜
ŒðEÙ+Þ¹®Æš©Òο‹Õsð©ŠlQ]SŸz»ëÍm®.gø—~Df‚ðWì2ŽêHqzZ~S‚ ÿçòX× ³³ˆ?Í¢psƒÇ:xc*ÔÒïv2 .Gö{lñAønž}€’J>"]+À +Û¹ ~ó‰PÉ~ ÓÎwвÞYÄÍG>΀å׌W}VgR7>d“ç<@ìŠ.ô! Ðëw-çµP ©ÙýÈ®œ¦·_MDØKR 9ÿdÉ9—JN^*¦–¿ë\”ÓäáoüÐ]†Ø£ Á>£ãƒR“ÏÝÆ¿ƒ¼Gƒ[X~KQ‘Y&W¯¢ÝqZ&Ìõ¨éS³a±ñ–?Œ V)ÿ ÉH‚ÉRÈ==Ké‡uË»åG [éi3×›~½— Vˆ9ƒÌ/+ð_3¶éK °‰Þàd 4¼ xœ!Í R(Úu +g² R±Ÿ®Tœœm”cPd‘È¡&VŽÄ`u“ßL#¸X”®O_äOx&_¸À¼r/ö 'ÓÝ°¤„–¿oÈÁdDbGÔ i:ò¥/ÄcE~ºh« ÉZ¿ìžDg{,h@H‚¯´eö{´ oýÇý$ÚLKÏù†¢Wš83ø–·ÌŠ ¢Ô ŒÛŒ× p{½Î|íÚ;Pm¢u¬† „+2ÕM+óÅ p.ñÑ´IÖ²ÀPOR}¤kÔxKºw¿¿ãˆíZÜ¦Ú ~° ™^"Ü’G¶IÜÙp …÷Ü œsDÜ4U›á3N¼âF˜†yÅBQ3«Ïà&'âŸJJÝ+.¶xòw¼º¦JSµ
‰î( >~L¾¥/ÿõ3ÝöCeÔþ¤Ðµ7iŸ¬’À)xFf6A¤Š¡®&>
ØC]Êx0<‰ NµõÇÎÍéI;wÏÖt¥³ëÙíÁO8,tcÓµKyAîþÐ8QÅŒ# $éÞU ƒ¸Ž9‘O„WZ»Z<]wåy¡£ßÿp£h
•~ëŸwè_|Õž˜dS_"!p]®#þçÏëu
ÔcJŸ²þ÷ ’ó{‹µKÛÚ$mKN³–¹•ãÐE^·õ;*àØ +û[ ™‹ìøg¯Ô¨â@-‡'%vÛ¾: IíÈyîâöhw„&iÏÒÝexí2&&½ö$ü-¾ íOšø:Oéí'íÖ®–ì¸Sù +LR¦Å/à naêá«Â¼þ·¼lðUMöÔÜÇe¯Çn—çmó†uØÚìêa}X{ÖXðAeÆ^ññ6AY+áÔƒSIÌöÄ©´>¦„r[éBÙðåÃèJþ”¡õ•ô£¡‹*ÂS;nƒ@ºÜ‘8é@Ù̪EΊ·}m"? +í®Ø+¯KdfmÏf»Xó2?0+yÙÿmÇ2£Ôƒ•¸ª½¤Ì€Ò ëWLM?W;P2Øš³ŽŸlt›+ÿŸéÚ*ú]þ/iõ¯gPp»°ÈÝ‚º £z€zç=™îc¬©É“òO¢óD ±H~4f-_eÍI"¤¥Ü!aîå]ÔÂæ¦#$Jå.þš "!TYI] æɳÉóŒ„ +4Øö Ù +îÙ°áeW}tƒ—»Ä¬zØVé‚ñ^ ·,$°Rý}¢Ï‰(Ý¥ïdòˆ°>Ñ"Ç\óª8þËÞYcî"žvSÈ©}ˆÿãDáâ ¨ÖsQÏ^L.^Í_‚²·Í6jT7¬ˆêQrËc¤±PÖ ëº}šÁ2ŠywתŽÜfŠ™þ äKضùŸÊ¹}[¾ã³ï¥uS.‹oN#åÉŠxô’½V-n⡶+fCW°“©Dþ±ÝøÔòúÎäLP4Š(R°»^#Žz_ç¹þB£èðØßý)^£î(¹Ø 7‹—êÏH1ËÈ®{lPV‚õò×Äk¢z‹xrIçA®X\b'p¦ÀŽ1Oxˆ3¯{Èx%r;ÓÌò lŽ9ì,~HDÔ[ÈbAAHR ~ O( +&|à›*þ´ùÆ—ù…3ÍØæ—N1À³ÙΣ¼mOð8âZø/åªëŠójFIó´À}¦å¹V¶°“öõ(púߺôö㬰ÐãÖ2U„0é¥ÓMÑ|4ã§30<yR° ´,ž¤Ão¾‹Œ?+'Ö9H¿ÞÁÐ yg\Bº +ty‹ûkÙɆAhÁU ³º¥æPþÊýÄ»WÄá‚[0Ã3AѼ#°ò—ÿ™#cXŲ4HÏu¢Aêò³Z2½–q82´-gn-ñ|£{bI Îÿó´‡ Ó¬]6â*™«X‰8HWœ‹füš¬^÷ö…eÃM¢Â/M`ÃTæóÑ'/§Qx>·+ +!Nóv´òÕ#˜ÇÅ +s*r[ÉM»‘Èð²ü’8¡h”™‹‚Áë8A.â0ê“ð“9 D‚öögó{ŸTä`eúS0 ¦îºGÄËN°øýÔ=]vžLRÿEBžSn½ ³¨ âN’Êž˜’¥‡˜}l8²óOÍUæüNÝ,l—ºEó²ã/¥ù Äz¿AtÊÃZ•Ý'UÆåÕ¸fÍêP<\íµ+¶ &ÿ +ìyd¤;íPÎÄí‘{@¯."ëß îÇïzGãØÿPïwúm`=á "ë@r)£Ã`±UO ]yÜM|| YU¤nò3”ô‘Á{Éå–¾§}}R§*F
IS•©Oô< AÄ'ô÷!°Oªüeê3®Ëà¹Æ™£žËàÐÇÒ³ +}¤™1‚¶çE9gvÕêÔG J‚ +J ÷ã§+* MœsIkòæÝ'=lÞ•ýGè3R4ò¼nì
W?lÙ3_4oq½°¾Bу薳Þ-!;Ž}|à(vcÒ¯ŒÌ"ÓÍRÚ Ü%Fü7)}%¯1L>JÔ0ƒŽÛ|KÉOFˆnëÿæšÃ+ ¬´UäªÌÊïƒLËé„Õ“IÖrPV}Jyìé¬n•DùÆÌWðäþKLðYoÏ£=%b@¬”+Pî{ÌîÌ’É3Â4:ÃÏÜ6 (?ÌVÂ.
Mgþ} +e4s ŽÈ:[]%g7fÝŒ-¶ä1 ãN±yãú¢ÎžÖ5y5¿Öñk.¦cë)sP 0qU - ×÷ÑúXŽ‘K2è-Tä%n8fûã¦oöjä· ½ô¡O<&ÉèKß-[ø‚¶îM`yëþ·¥ð)¤©sœ<Îæ¤Ö¸.+B•ŠSß}ë^©_äncæ?I¨ïëÇümMè„F½^ µK;j¹~»•Ù±Tvºãæ(¡ˆ§r➈x#±i ¼Q¬¿Ù¡”Æ/æ ÿÿ÷ÖâÖ,ôܽ=yŠ¢ÃÜL¾C€:þdµ´–@ûIàbN¼6 g-ò¾¡Ó!fGèW>½ŸÉ +‘IÒAO]%‘X 脤Zê|ªF7&c€Åç¹õå wõè˜yýøL"®%«_*¤SÃ5Y‡4y‹ »h3Ì9“ŠŠÖ;à]F1¦)ëôä(eÖqOB/H%E௠’˜±lÙY®5…)fú*ÂÇ·¡¯vSm@ycUË$n<¿nyo8 –\vR½Ã˜2 úð2¨‹Ó|XÊÿþK º?„Ífsd†ZCz´ ³“´ðÍ›ö¢l7XÁâqO¤Ÿ¡[ .¡˜Y‡ í>ü DĬqª=ßëü +3?—ÔÝ"QˆŠ1dÍ+çŒLaLŽÁ÷Z:”ÿÐ?§fü¼¿ïlëø >œ îÙ‰tÉ f¬
‹\À v£A``R‰ïDÈîtÅ ÂÒÜ +g‰*a˜4€4µš„dÜÓw™bž‹Æã¼Saè©-îÈÁ7‘ Í +rGÈÈŽ°ñÓrŒk(ášSÛ7‰¹r,z§É.0‘&Ë%Ü
þwºŸ´¦hCj$½pw€Ö]úY!¸ ë üˆB1üÍ{»®Žp‹Û§ýͼӸ<¾Ñ’¶©ÙÌ]›«*‹Žc)¹0†â¥†™¢9a X1ŠCz¬Y¯ÙF¨ßã;Ïì2(î*[«"Fÿó¦à6•¾ÑSåÏ쌡Ž–µœšg[ivÆ$ ¥a!íW¥0rí,n‘£DK·-7ª¼ ”P©âIoÔûM ›DwHQüí5H¥ÆrFßj¨è=ÓI3† ðGÒ˜—$'ÎiþÜ…ŽNÇcMݸãÖMÐ@ZÞc²GÃ'ŒôQH*·½ +´RÃKÂñ
ª"j½r\_eã}±[ª8zéh¥N„1¦58ë•‚a±<Â.zv: + eE=^ŸRϹr=låk£Ü]?‘aÙI#èɧôr´çä•?ÒÇúц˜¨¢ÈëK•Ñ&±C Ü s&<A%V8I-´‘’©— ¡‹Ñô3µ&ZTÇ9-`NÕð˜)áÿ;aD'õõcsh‘ú³fÄÍ«<k¹`¦“û¬©ÜxVõŸˆ)˜åb<sd8e¦*‚ + åj\´˜Ò*†ü=<Õ°«²CxOB‰¿ŸŽ´ÐÊÀ+Ÿv@Ö fǘgå¬wˆŒ5þB•4 ¦ÒÐ@îÍ0•:wì\ÞDx…O(Âðú +°#Àݪáœ%4`¨5lÖ×Sv©žŽfLzuk¡aU uÝï Þý]‚v5öB^Ž =sqvÖn¡×Y;¼†—ˆ¤¨ö˜ çºlû½léHQ.Ï\‰ž¢Rtk‹rÁŽÔϵj£ƒÄÚ@ÃöAIÔ·ú=¯ãPÊ/-p &¦xw%½¡©¸b¢³QVM„ð!ýc‘ŠA¹ÐD¨ì0eßh6Z€vK…¼ê?ˆ[r¶C®3Œlþø4áEHŠ™Àú`rµîÑhîi/œ°ëOöòš +K¬+ hŸš'E*= &pÙ6mÇBœ·ÇU)¸Ï N_ç3jþ +íáBT™,·¬°!G†åK‚I6Û¨©r»pDzREj5!Þ½•öÀþÙ\§ ¡\X¡ÒEŸ÷\$ øcî5®‹,ãöxòš¦Ùmdà Ü4^?íÐÂà,…/÷:ñ\Á fÃ>É·è†_Ò³¬òfô;Y¯$µá•KWGO7 +.%¹ÁL—èÒF½¹›brÎU†n‹^¥ÕN9Mã¼|ÂÈôœ ƒ?ÌILÚ@PàQj®]‡/öß vHö¨œº¢ŒjÓû/8XQûUwôE™;Uï„–Kñ ó¶â}÷Ò)‹ ¼ÕÞÈ}TBV„qDûä7ˆ zo!ŒïëÓz >ï&©Ø5Ü ZØðeAgp©¾}Rçí â7Ìwð8Vq +^:«éR¸‚¯¸C‡i[)¿†}X“ s—vö4¤Ó)\㘗¤nÌX±”VÃ$õNXƒgÛÿ™–3k l˜©8$&ÇÎøVPZå4 T©ø]Œ«4 +Fç;qHä¢ ï”9}µùšEŸÛ‰hb ñêõ#Jþ
Ý;øÛZ |Œ
ôaáØbjºHfnï±–¢¥– «^µ»ú&˜ë¿7 ç¥BÕT»o4rzü[ßì/SÔ[ìT{|6Žw¼„fîªØÉM•jiVä‡þYã… $…:ÚȺlç漉‰É']¢6|^ƒ*§§×PÒoÞi"…ÙÏ*B}uèu7YåRઠµ_ppOâc–ì 4¦lZ©¿ý@V«y9J“¾—çÄZûvF9Æ4Sìš +¦®„’o¹±ý íßÛÝLx¯()öE‰ðä” èDÕß<êˆÂôSâ‰rO WV|ÌUÄ5NªAþ` +ÏSO±¾¯w€ï¶3ŠªŒ°¿–óOÇIÉÂœ½DŒg!ûÜ:%5X¢}¡V±ú´%µ< µ™ +t9£SW4&ûà§-OÌŸÚñ©¬´ÈB$ô€Í’©(ÇS·Jw‘e›ç™¸nÖ2gÌ"Ç•2Íú¥²³Ì£ÁÜpàÁéF°®µ)[ÿæ<Ä{-'W L1™âYV¹ÆR“Maô‚Yl¼Þñ‹Ü›ÆŠ¨¢2Æ”SJè@%ñT|e½Y¡ð«e´Tûsì~wúè›kâxÑrhÉBTj:mŒjû¤ž¸â¼#3-ø@ËÀÊ
R°aŸqH ™OÎݱ»’§1úo/¡¡d°ðÜ´¾áÊ€úqâDâµZ‹™c³‚t$¥PÁ"aðW˜$l½4³©Ë~ˆF'Cs K=YÌ3©Ý•}ÆCi Т }YB¦ÎÎP»›÷‚_C²»*_Êä¶áZö§[(ÎÀbçÀ/Ñ6=_”ótáÁÄÚÕoîáÊÚè„Êþ¯^{¦½bOíi¬Öou*ü%]Ò÷ëPn¯{ž +ªÈ–âÛt†+°×… ØŽ ïYKa°½5S²àb q®O“KÖ,ÙÝוO³Rˆ‰töÜ°ù\kÏŠÙuûÜÓå¤ÖBú—2‘_ë™â[HZÃ+«o8HÑûÈ[<U lêáé²x \ŒSé8¿“É]rçµLcìf2J1õXøÉmeaO`3Ü#GùZ§™“m æ<ofîÓ—lênãad>aàƒh‡Ø ɵS®ùÎ3 úv ŸÒÉù:·ô퇡 ówòNÀÎ!„J¶§º#|pàJÎzDäϳêFÕ¯‹gKe É4º÷K2È«îê;×ù=É©Åh×Õú³Q•š>×ÂgC Ó•¡mÂü˜>lÜŸ¦ ±Œ¦ûÅnAß ¸h=ÉV5ìcÆzˆ
æÒ¦ £L¤uÁåºÄUÝö”yH +ø>)îESÖ ýK˜2á«üér=¢v¸¨‹ôòžû·H ˜wÌ_Hú{!2´å©O°k1R +ê©ÇÀh
àûû˜È m¿I¨ìA±{îðËgõ"Šf +K)æ³8³oÆoE +òwóXorõ}“‡·½÷Ì4ûå~9—;Mµõ¬ž¹½ÀÅ´›Øuä̬(ê-HÉgj¼îã;PþÊ Tóܼàô èÈ[™À£7ëH§£šCWòøªûº¿S›–¢³b}`a\ž© eø®öáÞ´¾ÏÁXÆí½øÀÚ¯e˜sb>WQy3b2Šü(þÎí/ÜókÐÚÌÈç=akŒÒ!“½Ãd[ÈQv pįÅmõʶréÝc+ÆsFéµæý µhêÉxÝf°N /ÕC—H{ÿìrW¡‹MÐpë•i +àSÉI³‚}ù +?¯U&šÇ—_ŸoËB÷JvH³ Y\( 4ªVX=Â8.v‰‚>L!ºlâf ñ$(R6À¢ÕZeþò +‹)DÁ†YÇwÕ +Ø[áâ{ÅNpå +Û~ jÀUr"¤¯Ö_³Þ+W'ãE:)öJå9+Æô }fÏ2#vÇ1Ñ …µá[-ˆrßQVy[ ¹Ø—ã…+£P„Tž8$$~]2´Ve! s; C5•+aÙÝä”Q€Û‡ ØR1ƯÿN8ƒÓ!¾Óg`ÁÓÙ°§uX×ëÑsT¾•Lã«›¢vŒÅпn§Û{ܨ½ÿ,º¸][ék=¤ Ë׺Îñj!s".´àB7YU4ÄNVŒ²yô)
Y%Šl¢&zß*O
[Ôì}ujuxíPà5ànheõ~ÎÅQ7_ìå$®¾D•r'<ƒ9øJÔÂæù._œK«òÛ¢¯µ*>uaSõÏUb»°¤ÀΩ +{ý @ ŸÑ¢_È }ôwž½-5‘¿ed ‡\¬SFió[C4H_1ê7®?ãD% @[“ +‰›v<Ã>eàÈ,hu˜óŸOµfŸ§\ƒA8À+ˆpgûS,¯0 Ï"×ÿN¸š`v–¯{”ÓË)µ¨Áz4’+5ÏL#”lMmxÎE¦;¸-~ÞÓ € > —·3d}߆ìÇøwlƒâ‘‘={Ä>«]ÛcsåZÚY«e +Κ¨Õ£–”–ÊË+1ÔáAÄVL–4‡a¦ ¦j-P}¨Q"2,> +º h{PáRÝt¢.üWØêŒ7b052ªÏé'±§³hj,[,câ¶ø0›K6CÒƒÔ¶Ë~H4ïã4𦴟1 +·£kE mÏR¿‘¿¡ËÊࣘø †B—öR}Ñé§ÍÍÂtÎ=Ûh¡rÑpur'M~תö>Ï„-N”SÍüÕyÿ +ÈQƒ:•F÷:ÍxÄ€@‚ÚMnÞv+;'!É„W•¥Ñ¦ÌÜBH©Z°¬ætü I}¾P›tC;„õŽ>Z±A„vAÞÑÔìè@µà‰A$+ÂgC"zXŠæ‡?+øÔ'K>
(òO¹ó9 K㧋5J…’š¯ðþA,ä[Ñf7OäïÒäJëÙa¾/xRˆCÌ?-W8I"—›™¿éËÈyŽY„D! +Ö·‘¼ÖÓÓ£IÑ1ˆ¿÷¶úáÊÞäñ¡Á%îjE-2Óî[øWªb(›<²,$4¡ûdm8ï^ïE + »;ßôÐÎÈU® è‚ÉŸ©@ñÇ%d‰Q®/RJÔ¶AŽâsSCPz߃£ 9ÐdÒ v?Ÿ ™D.ZÒ¨#@U,=sþ›’‚iÕ>¦àbá• ªõEkƒ~˜bø/™w0dâàÙ$F4.N8ö՗Ƈ™—ö 8€˜¹Öõµþ0,çø¤q+ªP²`Ãv‚ÊÔÒ¹S\êÖá-ö‚utKt'ÌÅ, =…¬¨³aWQÔÓÂ}ç`Þ›ÙbñqHÏ—REéyÅbŽKºwµzŽ;d’)í"®½S*!pø<x]–ŸäÏ’ÓÎÓÁU'Ú0”tÕ©^†Ìú܆ +=:—ño&)BW#^‡1IÌ„–:50ÔQYq î»æ§Mfc7ŠüÛŠæ>Ó+ã!™•Is“©:ëb„žmX<@TIÏ$¦ŸØ¨ žþðK{òcJm:FY³%Iò‰—Pˆ1‡¡N»üÐäâíMÖbÈ[$6;Ïï[BøoÏÀ*U+"k@Ý°
l¶Ö12³•ìÛü5mw§-ðˆ“„YíÏì tqÅJ‚Ä +ÚZ‘ßD³F ,QIÇ1…-ˆ&7 ü$ÊÂú†U>:…E{ƒ%@°—ÃKÉt¿‹ÖuO1mãh}#f0»‡kÒª¡%L^o‚§¶h†Ý“9k
¥‚mY½TݧtÞ+BKÈñž1Hð8aΪÄÅ Ç(qé e6mÎcRÁ/0áBü¦jTO¯%7‹tÀ%¬µœ`*£S[”œU]р蟌†æ¿]\sÎmY9ÙœE!í§z*(#Züú #5Z EÅ &-ÂÛ8×Wéâ~Ö+*û~{ù4×°ªâ¿Ý,%Ûõ=îì¶X|þá7½Ú³h¶ïÕ–„Ä®½¼ë©q[q2…èÕÃ'^ó&°¥OÜ 1„T„smfBeÐj»R·ÉÙ„µX +ãÓ¶¯û¹¢Ú¡mÏHÕ>kk$ôüBÊ«fÍ÷øs¹EXW‡ÎÅ-{ç´Ðÿ7‘>øN
R¯“fè¿<šn;BfÝ—ÊçGEn=4IÅ=<º“ ŒÉGsª ĸî¹îádGRšë‹ˆ¼†ÁáHøb<Cþ‡P rØ 3ß!–Á”Ëp²á¾d‹Ÿ7ë"=³˜ð-)$OÉŒÛ< (æÅ 7¼%c‚rF’vϨŽNÔ)‚îfözZ“ lÉYÜÿ›/—g‘?Á™šÔ)#Žgʧ¾/û_è@
³À KzóM{-h‚…'èèÎÃËTà@Ë–à
VJÏ×¥D)Û“Þy³+Í ¦ýK}ƶ.Y'ôÒnuúº€R“±aìËè˜gÜ·Òê±·J7×çüÜ%+®Ê–Ôé¨T6õøèq›_êcñIDÒþ?
¤¹dqßs8E{•c;DPÏ»y‚º%±$åÅ¡•(É/Ñÿþ¶ã4µSæ ýÈ<x‘»JUÕ¯žÕ»¦5ÈÅŠ‘]ƒ"¯–+ íPmÛAAñ‰vƒS:'\¸³²7ÓN:cb˜JŠÁ‹ÛùÜhiS÷³°× ç²Ý£ ‚zX‚^_=Ÿç‡…œA”²Æ>KZj°¤; ¼ ŒQpÑw¨´ÐwàW¿ƒC'«VU¶¹³m<Ïø†íu–ÅeÑ!‡D¬ÝYa,+L¥25ÝФ6@¸œ +ójï,í X”X ý–î·è>§àü™aQ¯%RQ sÀm ¬¡hu Uð¶ü´Y¯Mò÷(wGAcù<™ +ë*E§0 iÔ +ºÜ°¬¥&EÖ8B6‚,^rf£‚7 +Æ/Z{-曵ó³ ~G¶ºÃæ iË5ÓL +Ò r¬'KcÉna>Q¼<LBÁƒ˜îl¶ # “lJ‚tUÁöïgkϤ:Ã!Úýs9R_‚rh:káÎŽˆN ï©›‡x·¦H
™5*~s:
šÉÒõîÌC³WÀ>íPç | D•Äk<¥˜A§ª*×ç!¶ _¯z¹z +ü)ö(̶‚ç\Ä54SÄλÖsexðfÎ]$óÓ®ÔCõ- óŠò²L-Iova$ túÞp’`E\k»æpo7â†p
ùor~NÖòCG©Lº#¹ Ô)åÉò^• þ›ôßîZ§_‡¹©sö^Óâ@B² [š]õÖ-%)Ú?1gÂ’@ÈÄõs]<q¸ L Ÿ +Ð+Øz„ìŒãÞBŲ#…Vp O“Dפ=W‹k0rÒ€ +ÏjöèUñ×›}ÉÞÖÂTçŒik¯KD6·Máreç¿ñÛöôW…CU„, ÜÍ +|°®ÂæÏ2hº ÜX:è&WPÈ#}ýÚºu,ÜLy
ÊöÞèÐÚYÏ å¬¾Ú÷^K£ž*\¶v ¿@·Íšy %t+³v”þv6ÀÚ˜ +{|ƾDŽEÐ1çOX =X +›¶–H/&[Œ¿û;Òì¡^ÕCY‘O+ÐV²•½{ašOwØìaA¾»z3 ‰Ñø§ä +–½p"½#Óîš¿¸µ²²©Û“yú Àþz€ýyÿÓx~‚¼‹2d–žYôl Ý0D]Šóâ0gZΓ
~ö>ôúÚxNÆá+4+!µ -•1 ¼7 ”¼zLÂ0E)¶\Ì…„Ž‡+5êËEf•~˜•cØÖãe¼Êù#ª +höb)Î/ Ê€ È[¬%NMÜ>8×saTÆÜÝ%Šfð¾½é.a,DÞó“÷ˆÌs'›˜B"î:ƒšKÆF°]ŸÓ¸Œ
ŠW7ÒA¥Ö 9êjçRĘ!Ét¸,l4…å;¢Ø™ðFÝ͆:dÝV˜¬¸ÈÔ¬fWŸ¹n;;¨: îh;¯Z©›®;{{;²tÊl»ˆ{ÚFñz$š ¼®ÌÁeîýÓüŒß+Ñ))Ø€Ï
>µµ£ JàÆ¥B¥…Ûoñ£“P`¾c +Í´ä6/ ™ô/ñÀ·Ka]#ðÇUüªí\Û1¥1m™¥ŸöCJ3¶CaÐfÞR¨¿¥/këmNñ•r}:y7²Ë)eäÂõ¼ÃèˆZ» +'&Á÷GŒ¹\L®tæ\‘QWpÜÀ ØŒ‹„ÀãÉHnϳ;[(ú¾t Ž7³@’§¡s¤ ÐH€ã-ÑÑ°èWøH„·ç^’à•ZÀÀ;þFºÙ—àI1ùm?~åFÝ,ÅE붃ú8Ž(„£ÇÕ±a S+Ä?µk{¸"ƒO M¥—vÛd„ÊJ³‘¹î@Å(‘¯¡:Z›ï@#ÕIƒI©oyZ¸› øjETlãþŠ +[e-ºgÈ«7GIg]dc£%Læ1Z…u Â7 ð*®ááWg¼§ÓXÐÈ"(ùjô ò `ßò
q4 è!ËÆ/"Éš´àöÝß@»SjŸ‚QÏKØþâ Xœ×¯»^£ò (ÿÄZÛ8‹8}ÎqÀ€B¨«ù²|õpå%õë’Ör|#ë©[EoÞ»qÀã-WÀJš б٠6u€Ð˜îûâ +hÓ¿;egÀœ@‚®ãúöÒèNtæö šÂÞG1ÿ ,å×@:¤;¯cz~w£§÷9Ý3’§3#R”²\d-PÍ€¥77ð¾žÓ5§ðê@œ©cËßHlÚy(Š8rš»h…5q”‰²‘‘IŸ;„ulA3ˆ «â˜VK4Ì\`¼Êa +gÓº¯LCa5uŽæÀšr¸êI:Nd¤™0T•®Ä»6 º·n.n´ FÔÍÜ´ÊS<pÚ®[¬i2½Ilji$o™ UeÍ-Çu©àÚcy¯©wâÄZ^ä‰ðõ¸ôÕd6?1ÁÃ’/ûöGQÍh‰83W_Ð ¬·Çíflæ»\”æWë M”;Â@ðc‘5ð*Û\8›>šÇ›ÀžÁ!–zšDDžnØ“/rªMÉ4².S´E0,Ã1½m±L¡“¿ÑšGè›·¶GÍD‘±jê¤wºOÓŸz‡–g²Aì9§Ý^Kñ,’ÍVa; íyÝÕ’ +öºúÙÓqa¢ï=Œäúo< +kÍ°ÇzfÆu@‘¢3
\ ¹qÈJù’FÄcSf¬†™àU â¸R©g‡ÞdBZq¦‡_&…åúe·úïHrÇ¡õ(qä·`ï9ÁµíÉ—’ù¬Pst‘dC Ý|
DÊXÂÅ# 0ÏËËÕí‘ô›*ôy\TâÐVw—Êešÿñ^æ´8ºúa ²x%ó÷ «û¬~-Ûë1ö;ÊDZ +¦aš<LÝ$tHá—@h1•ƒ +ãdj +,Ö…×7Ã~Š¥ß¯ ëÐ_Ó„ŠãÜ7ªLü +¤°¾× G×Ý6yPKŠ¢dDD +` ¬ËKÿo
HÚ; +Ô̘˼uÁ rs‹•œÉ¿OI€Ã® «ó\ÛJ‡ +²H<LÛe=/¢\ êËJ8ӣ¯•õ¤‚Ö ùbCý!n6‚bQ¨Ðƒf)|•líÇ%Þ¼ÒÌ%=C•žEY ¹ûWþç®øëौ`½([éôú36c@ÝFú›˜Ê‹$7À¢ñ̉wvÑÐ] +K⧬Ö1”*DÀŠÃóWñà_J¯ÍâšÖF1¿#ù —ì »s«hJÐù”+öš41×k¶ª?ÉT F
¼¦èoŽ Äz-çù½®Bì¿Xæ%k Ú-6ß$ˆmT=R=ñO€_.¯Ò©€o +yt%Š/RBúb+܇cÅIE¹¹ézs4†b¬½dSx’#¥æb’1Hå,Ë—í¶íçª08”ÃlŒ†µl0Ü×ûK)Ü,Ëp÷‰nïÍ@Ë1µ Ocš5ÚKyÃþ¿æ…âòʤqÇâ
XÅ“’U’b¾Lp¹jŽ$p=©›|Ú #’öµRïÞÃúÛPA eŃ䓤¾O¡’ÝÌ¿ò’bx5…èƒE +¥ÿåžÉ5=Áoº€tò!‘A¹gŒé‹×ȨQ¤ºŸðB¼³j
ûÿÄ>ªnY“tÂiôú¹ÚlÓß´sj9ʧ.íùŠFæÖ¢È} &¤¸ +|5L¿¼ UŽ«ðµ[涞(´£tísuÜCå/“‘È +§‚l?œta +üüw…r³œoà‰ÀCÅ,žyQÍq6þ|äçùØðø<úåí§Ã\Ü=ïp£wÔk«â3Ú£ÓŒ<5œ>\ ]" +¼Ý MOó!ÞëÊþù4émŒ/c€VtÐ üBs=¾&¸o—Ò@˜É 1Q…só,ÖÓÒº} †.)w«8q²Z5rè_˜h`°Y1ÓŽÛÇ”yÅõXæÔ\I\o.c+ÖγLÖ` šþˆb\P›Òò×Ò…ü=,l.0¬XÁÔ8¸6ÏŸ F íòH8&é¾.<¢¹Ð±ù¾{Ö=—¿xŠ#,ýÌÃY>®FlÄsÉ LÄ.T•Íþ8ª$Áù{íDjåÜÒm|ësIÃõ %#Y¨é)1GI0¤0q{ó&ʬ¯:¢Ê” +öÚ±€B½ÜMã¿àæ`Õpûö +Ͷ1ƒRÿ$e«¿‚¥?±{4ʼék‹v—¾ ›I,bpўݧ–)ÁR ›Ö2 ¯Ìú©¿c
wÂokºÙ· ¡ú4¾ ûa¸”û6Y +É=LNs¸ìPæiI\óô3ˆ»“6“5½{m “b§-,í^*¼Ö¡S™ñÈí-¦”Rµ‡
pøÔqÑFºëÉׄžƒ£†õšû–fˆÍ77¡(']R‹«—‹QXdµ@.¬ +*‡±9mòÖ ñ½\J8E Ï>Rí#³þĪ7Š±Y[ßâN‚Þ¼ø. ò˜{BÿÕµò-¤t¿4ázN·KÄíÔ9AÆƸdeña 5"¿…b«ØˆP ×’º¶!@’ör#—s7ýÖ΄B XÁÏ,bÃë›4§ÃûíK(ò£ÿ»Ü¥mžnEÁ;¬œîâ™Báp¨®‘0³i0«ðc oÇkïâkW)zÝD«:J|Q”>n +rÎlØWž
3 ·iN¿ƒŒw¹B_X2(ÁIyfkW?r°RµÄQ j©ü*(kr^-‘ÂkAô¬T›Â3דk™ƒÎM•ÔÎÝ&:í”eñ;•@ç]OCØ÷Ô5MµyX. í)÷`Šá»ªî.)
–0•àæ€*!ÒLûA5›þÉ ¢ásã¡ãpu H Èg}VÀbrQˆ×ÿŽ6|ñÞwx¥Š–\…êT%þ‘-ëùŽgWÉÉMB¯Ø¾'•í£ +ÆË]zÓ¡a ©E¨›:ÔjeRÌ\».͈°ýzÆMUëpÚU¥ŒŠ»µøVÑ°ˆÇJ¿¼4Ø!–B™íæá¯ý&öcæT…À¯{ïÂ>í$½/¸Í_b±v´˜¿dTª ÊÈeÊÈ W!‡†H} šÞcôŽàõ–ƪÊ+sËp`o÷àºò#ú{Áæ]oLy˜ùIî„õË ‘[æ$שï©Ù•}Ý”¡ü“žvz#ßdaÞ’ ÚÉXÚg=$ã‚gÊ/-Äãù\þ¾”ÌBÚó-=ôàıú,ªˆ YîJÓÂ:~Ýw ÜÛ O¢RBŒ}%ÞàqvüÆ]° ®3É;ôÂM¿4†Å<ar}¼€7 +DG…>îü9W„×/'2I3 ¹#£Å[wÕÕ°“€Ý„Ǭ²hÜh{ì¬Äš +í{‰ËÍ/Wý|†Çãå>?dËçûü†³#²ø7—€°öÇHÁ +LT<I¬1'Öª»ª»#·‡æ —xÉ»óŒõÌÁ±"â-IÖ45·‚’#p<a µ2t4íÚ’ðˆÉÙe)uB“&MÃ-ÞœK˽UR7's +wߎ³â°Î“qI¼ºN‘!§¤a83Æâ5fƒâ¸iFšO¨.L—X·[&‘»?Åÿ÷¸ ×>nø~` 8þf 'Lqß…ö.ÛCâ#n®VëÔÕÂتë€ËìôÐx!¶ºŸ‡ 㟋²uqÙ" ëÔ?{€T¿à¯FmÒ þ;‚d;¸ÝÓ€*(°y¾œˆyu@'§ðÖdîã¨Â`’fþØD•å-Š +!ÿÖwªÏ=¨ÐW‡
1¢ù€%Þ@t™X=û2î–ó\¹|¦fIž©|"9Œí²Š/ì`b𫈳f¯zµP·¶eþè«Ž ˆÒ!˜ÀYÜ¢7ؘ—QP-@ +cf
o² Q¶Ó~¦õO¤í?ÇÆ&K%LÉb¢dR¦æ>$"#V±¥ÿ&ŒEǨœ"ÕBVˆdä&¡GÔ.CÐ×>rRòÖ1á·8EÀ½ùŠ·Æ§¦ 4 • *$š¹fWõF9i½°s( Pdÿ9ᮇb ’Åc›ù¦£“®Pè)Gz6G.]ôðÝÓRK'†-ÊK¢8®oƒ |Yãm×É×p×ÏË’]°U¶… ˆ,. ºóñt ;QcG'YÒßzÞš +ùPÞmÐô£Z}8ø;Ùõb\!S?du,½à‹R¤r﹘&b”s'·ukø¥$ÐàÅ-Nîf:ÔRÈ~Y~îa¤×àçC kåäxÊÝryXìZ dH
‹Æ r¢t&6|»ÏÝÆLç4 ¨¯%ïð¯L‡7(ÇجoœÈ‚1TŸ˜”_pƒó‡þ à
Ü=‚¼©‹@ßÙkmq
Õ¾•RòA±Seú +ÌDàc(±Ð<Ø"Wi€ë©y]%´KÜJã@Œöº³XO‚ròö ÔjY(‹ÐDt,ÚÌØÈsâÑ#ë·,S.Àˆ¸‘Q7þ¿¼,A_}I!Ã9šÇYÿ4œ1<$\l5Ñ9ŒûíÖ !Ø€{æ <ÌV*ãÏoáQ
o<*oõG~µÒûQߥgqtëÛ|í
Òœ¤ãÒwYÔUêÕ”FÏ0‚=™îJ(Y}C”ì1ÌêbÇ£¡‹7 Rà6Ùÿð! ²NlMMNíÜ
¿µ%®%ËÈ‹h&w7¤1%†#‡B¿¸p ,}î•¥˜?
™èë^#-eÝ`ƒS\üÄ÷šÌˆ®`,±@³‰OOì¼Å¹¬ždèklþ·»=}ºà¢ÿÆ0ƒx;×#–CçXµOfÕq¥Àf+kXˆJÝ|‰m·Vfy +'isÅÚè ñíÕÅ ›ƒDd˜Ð;`?1<~PyBßíCr½ïîÃà³RT;EER)ɹEú þ¨•Ò*%2 t ]›¬Eì´€¨Œß k.Ùí¼FmÍõÂYs¥u¤¸ÖЫÈ*¹0oH@©ö“ëòÀi(«=M2m‚ŸËW>¨…/r2bÍX×ÉÔAÒ£¹ +TQÒk‡Žï:m¿NØÖ8UÝ€(àÎÝûÛýÏ +›’oâ~X ´DV(óÝZÒ¤òe×¾šqŠ ’K¯ñ3wà}î +÷»ó’*ýoLwÁX‚Ǥ Ékr—?W?{'µ¨^æ˜#m ¡Æ%º]ÓƒÓ:ÓpØ:&¬öx8M/Ë€‹ÍÌ +â,ZîôN²2ÿûdÇÞ{·måZ ;ZrýLlõS/ŽFê$4v“ïú)U +³cG<õ!î’`
{¤bâ;çàÇu ý¨3_AŒQsKS +;èåò …#Áv + ‰¿Ní‰É…¶ ¾ l‰ôƒ3|ÆŽ .‡+òÓòÐìŠs}lÈp‚Óäîý´åMñ&8½kE“ Àô%*ýBiœÖ|ÀìÛ*Äp;Á5~]Æ1xz÷.i_r섳H‡›ûC9eÅö½@BBL¨6Õ? à0½“¬"‚ˆžE@…‰³k?†á6Àˆ‰’ª+ˆÒ C›NÀy‹ó¶Öøá‘)kv9J— +¬žh‚"8<€_•8(Žÿ¨Î~ú§²¼§šßsHáòÍÅO~w%‰—œx%ý˜ŒÛè©ý^”¯%;"n£/_n ðϤ‘¼»Í ¢ †¼Ù Ь¤•Ê° ëvÛ,“N¥ c'ÖqvFzÑyò‘™ýFðʆA5<üž|ÆÃ>!ÃßY¡œuÁߎG.V<´•˜Y¿¾S"Àé%µ+6om\œŠb£ò'¡¿ >uH~²ÛÝ2¤;/ -™rT1êÉœ¦¸…ÛнKQ¦Ê‰j
¾oÇ5ènzÕQ- ™‚ïE±«Sö}F.CòÈÞ!¦™dXÖtúL´8ó½–Xš úD~ br¨¡^t÷lˆèêªÜ™ ‘T·„
¾¼¿Ñ<؇O£ŽßR(‚ +¾Yöñð"ïæ/h zœ ¶²L KÅ ¤’:˜½Þ?<¾ÕA¤WC
!À +X¶ ª cnÊq%v>–~òƒ6>Þ_¶wõDÐÛ¸=ÀÌॡìÈúŒ²džB?Pi;Dy•pºü1äê7Ç +$I>‘~ºÜ4 þñÍØrIŠ ÀÆÎäçÀž×àÅ/önÉ ŠvÊ:ÑÆŒ ±T±‘s7<ÒØÁî€í´ãáÕ ~fG+«Z\O{Zу"¡lèûÔ“iš¡ÑîºÏ[Å ©
Á[Øê ›eŒQ¥]”j·Bîç¹í‰ô2Ïëίœ'’q—a:ŠÌ¶¹š½°Ôh Hl±D{+âPUÓÙÔÕ£÷èÛ-gA_øcw4éÆÙÆ@Hß4Š‡ÂÞvh\k R=ÃÀ&Α +Ø©V6DIV ’¢sj5²¼YXê3Îaw8eÚE+ ¢í Ž=(ìðs? +â8ƒ/ü6_æ’à̼…=æ°D³%Õ•Xsk·T: Š[ßI*¬#HPšáÊÏé|!×ݯÓç +C †I†S×äιc¥˜5B«zkƒ)ôe¿Ç5uä¸Å‚KÁ€Â䦺)O…q [!uê†Ýwe†ú˜ ™•†“‚ù'ÀjáÈ‚ØG#óµ‡pòp…¢«˜ªÌ@ç{ nçé G[Ä~==
å!II7YÃW™ÂèØÎcV(Í"¡\@˜ eÒ¬fâ6Œ¨Ìûc<"e—£A +C„ªê¦ Mo€`6ÏpEXȆoò[
i ãq©žÞÔ~žSpËã{,ži§DŽõòËe„ú¨{d•ëæ©ÿ »zq}ZZÝÈÒ)ìy¨·wV‡†°„ g76*‘#gý©ë]Ô:þ„›á©ˆ)£e<©hÍÖ2bNt#ÖõTôÌd@íUÕŽâåìC½:~^z€A½²q™•SùN¥/ÿ³!Ìùõ`ävÈŽ$ «®‹ä?BéÈÏ+9ͼؚb“ ¸S“aò]¨[ýšk¡âù®^ð¼–Uø(’Y9nðuϦÌ5D`¸|(d‹:hÙRGpÊ/Üé¤J#©vT]ÁX”z^ð!…Î’uJC™‚XËñ.·ž}€êžBˆa)‰X˜‰·G–Fvtª–·¹oYk"ßϹv÷Åw¤œI4=8r›d•Z`çÄ›_ ÛQþV@ÓŽ5æžË8:N®ŒiMç=]Ðï•üŒÞÜÜôsØÔ…˜v6"‡"IìVõÖœÄJ¡Ø4ȼ*5jöjJ‡ b¬ ·½'׊¯nAÚŸêÀ†®3”Ǹ¦?ú*¢4[H_ûÇj€0ð¦H·¤¨:Ášúg9¹Sa#€L삨8X\ymG¬'ÙQCÌ XcOŸ´«œ´ÿ*¯Ñ
åÃE üp=AÈÝCÈ4™= ¾&îÚh;îH9M fÄšøhEÊÁE¯!ZJÍ¢-ÕÄoØsÉ7èzzË8 E¿îàÈÐÙé)y‚c‚PÒ‘Žó1)œË™¬ä %‹#‡ÛZÀoÖxO@–úÇå£ÞM–N +Ê©H[ ˜•ç š††‹b8æmañh¾SÑ…Ý?ÿwò‡\?Ø·9x՜ϊ[ ¯9r݉ÆSˆb±ƒ¢úëÄAº&@øHÁ6e8@Ø]âæ7n žrM³Ìz;?jçžØb¹ñ¯H:½w;{‰7€Ô +¶ÁFµûÿ¸Ó½ •®l¶:†ù\– ì4 ¬)TY6Rkᨠ~<ê Ó|\l
®Ž,b?°cÄÇ"¯è‹Is3¬Ë’ES¾÷ãÄ'dŒè\ð2·z]¶§ æ#š<èÜ’‡ ¡€´ù
Ö¯?k`ð˜‘aí²rNìeZ9wDÍèÈðAýûå½àˆõ–¢^4J$küࣨÖÊ{QǦñóvÁa¨ÞÜDñÛ۪صˆA7*J +ûÙZ•JÚ#yV¶ŒÖ³ó±Å l:ÙÂtzðL ÇHlíDÌVÁ7‡˜–VBd'»ÿLDŠÑ»3G¥ÄýÒÈÔóà¬jžÜ0plÉÊH]’© •=&ÜR(¹«˜Š}•FáF‡’¾À©o½ ªp“Ñ$Âd´¯fÜF,:À ¯ îz®ÿxfÕÑ +äYðÁÒË+F¨Ï— <kãu<Údv…4 +-Mõ:"²’¸7ÛkûÑ ##äÄé†ÃÖ±‘à— M§ÝŤ\zýOD Ò›ÆiTyòÑ;êfÄ$‚y8ÿ@àò•‡òmǤ^)ú× ¤X Ó -ÌsqQ¸žˆl¤T•Ì&_Ö 8Bº PµsY±µ¡ ²2Fø0°†\ ú T¼m9ÇyÀj}§L D| $i·dÜêD ÞçbŠ3b³<Á﹩ݾ‚³¯äÛ]Lÿ]Œ’Ø€Ù[•T‚XŸ' °nsòÆ‹]KtP|ÅH¬óÐ Ÿµ¼‘Ê'–¸™þî`¶~íÓ„ô¦Ñµ À†šAË;ZiãB±Pæ-¿ß<zˆAðݾ)øÀy2±ÕÐVÝ ¶•8ýÓ¦*Î ÎgMpüéGòrÂB|áçßHzIÞDüÎ÷Hùv/nÏŸ&4 fpg e)pi5[É&ýu“>—²Æ¤ñz +C nÓðËμtOVšœì,÷ÞÑ/ßKÐýf>»ª<}\¡«ŸòŽ ÿì<‚'qÖ_Í”£Þ +憜zZ;ìÐþá÷ÊWbV0½æðQu÷™¤+ûó:غë·wÛöüüd%Æ"[g!ÎÓ1í%‹ÞhžEÅÅ$ß÷^ÆúÛª¯ƒ?59fÏP±Ó®ûãÅlrò +È;\Sqt³ùëð¸í'´hÍÝ}!ŠÌ¬ÀønS (AÄêZ ¸íçñª?2©»Ø¸/ŸoE%Í‘Ló‹` á_v`u C ]â†sÆwv'3=…ÁL’}8Îé…ð¦uhm¹»Ø$jYzÒ:‡Œ'šÄmªÑƒHv¦A4SÁñ•¾ì*2›!\.y€Ÿ¦ÿ}ª”DzÕûˆiÂ+åY¶#¢ç*Ìl§2'!*úÖì䬎Ôëé¸t~ÛkŠŠÿ
‹Xû .ó/ÕÁDE·ÀÑQV"ߪ¦àòäÚÇ:Œ½, V¨§ÖeW“u˜hÆ;½ÙñÄê{4Ç·«›Â²a¡(Ô¸äB~)1·g7‰$TZÉqtµŸ ؤ +gµŠËi vç »ÀBÎ »—}9ŠgƒN +§e{uEòGÓK/>%Œ¯—ha2]Íü»ÊVâ…d Ò G +¡f* ƒø ]dRCÀ9Ž ëXÂf>%ÙŠ Òõëovøb´C*e¶jOÏ®F¼Ön¸´¼ÁXšF®Ø÷¹ºrnD±¦PÕÿV‡l°Ä^à‚º1ÖŠ|@J– “˜– +²b‘¬P +‰ªÊéO¹>oÝ-øÜsÿ˜‹èp»ë(ŽUÃÒ#!‡ý.ÇÅh`ŸS+/ A@Êÿ +Ñ uß,9ÈÍ\}I0–«ƒt¼ÿXü 2ƒª‚zÊxêßÝ›—%ðû„Þ ,¦ }Þ)ÙîÿN°SA‘Ÿ~í®@q€Ç;Ñ€Jø°Ae ì¥ÝÃiw56ù+õlk±Wæ77“n3¬Fâl_Ex»²aŒÛeøc.¹mš•˜aN{²´ªÚU*c`0hž¡{]A¢ì«e€ 4Áó¢0÷‰%ÍìòÃìëé ¸&KÓJ\¥|
7p°ÏçÏ n_ãY¥ F ïciäm´¨q Ø¡P;þ¨Üz¸ŒmÚQAœèvt¶¢ýí]Íú÷6àûjÏR%˜%Ëwò¬=e‚ÕÉWOfš‰
T š‰ …c‘ ØS‡Ó¢ÙA«p(VIä*%!“ži› küN ë0±‰ƒ‹W²;åÙ~
ñ£_wcgðé/*àÒS…Ó>ÖW@¡Ð WHM"HÇ»<D™ãú¥.ôà 3J‡)=Û 8µtJéÜS›v¯ O?÷kØBÊí@ +cÝá·FV+ÿÕÙ¬Søá¿&Õ]7"6•pÞhó!±e¸/›:@¾šº@µg℃ i÷R9ãìX·«ýhŸPœõT” …šZaògxh šµw¢Çí9ç½PQ·î ƒN~‰%"EF5*#lÙ¨ýô÷? 8"Z¡pÀ°·GÁç0¢Õ`.Tês_\ {ᧄ2†œ‹I +“s ±½Ž-øL.‘Ž¢ûüv>öÝ^6ñÈ/k…“…)ü:äEë(¼{ØcÇ $w!êý4:3XÿM Çà’–@?s=‹,#ûg¸0þ#qeuºc€(«í•ü×·ë´'@i…Zùr¶øL.‰ÊxjõÀ /3
ç.ê +µÀbSLoQóo¤ÅÎÈ$‰«GÉC•]e§ö¾ÒÏsfö‰]ÞÒÚ(fëRÀn6NÔntç ÿ›TÀUØ9ÎObvXÑ”ËÑšµ!õ¯”åÖ˜º~Ïd÷ 땼¾G*÷Ð?îW +à?rø/ݸ~±o0®MI™‘™ +^UD«@ I?‹RšF}ÅÜ—Cš÷¸…ñ]íu +pîšÁ1Ò±5ÐríiíÉ£}©Í +š¬Š;%u.± k^e@ÿ^°+“]ž†ÝHÜí•RE«½n}Ø…¨z¨PVõÿ]`=:ÈpÎ øÕ +Û&:À ÒvꇩÂm
êàŸª¼î&Úµ}¤0eU°Eö+Ä›I_W/Nr×E æoÙ²c®;ÃòTÜ^(“ôH)‘ĽD7ãF ñšK24ƒhM´â³èä_Ï[€aëÃlOá†ì a{‡s—{TѨ)û\÷@ó¿G xŽ[WÆ;›®óDôÕ¾Âb0~> ŃԇZß° –½.·ö¼HðJçQÔÀï×î‘ £Í4¯Á“kuºrà¤7ywˆó( ù0.ÓS±~ ›|üÁI´ô'wœ‰J— *Ò‡²¸§ÒdWŽBŒÚi>ÞN«ÝùÕâ$–ù)i~ÍÊ9bŒz·Éðv¾9CÖLㄬt1a³!åA «‘ +®¡MXiÄûÈKƃþÖ]ók2.ämOcÉ "/áë,š®û÷ è'Ž?éÕ«Ðwí.>Pé@á )/Ÿ±»ó¦“âÆÕž–’Y|v¯ˆ®¦ÛÿJG<yô|')o=˜?S¥¥÷‚(fíùM~Åi`z ÀRÙÍ‘aº#Ÿ'kã<5aVÁq!›ç èŠãìG ä¦ ï].ö óE±¶ëçÜ3>iØ«§ÖuH¨¿±Y(44½î´.råØÝZ ›Ê ¿E“ÙÑ·—G°ëÊgñö}C BëµU>Á6QPTr”Wœæõ< ܯ]ê8¤ ®[”¹'ûŸ¥ïþæñnôÈ׫DâÁùÅó'ô1¬Bîô*Ô eìŸ:¼VˆcN;Ev˾ßfœW –Y!ÿøžhT•Ïæ¾,ßm'’ÿ_©9r`ð â^Ž2Ï&lôw朄†‹Ç +¢ý×ÑÙˆÊVí{”Ø„Íñè
»~á#. +¸ÿûQAãø¯C"{âôÅÁ¹ú7ÚsûVÓóp ùÚòŒ ή* iËØ@Ù'åYÕIå¸ðç¼Vžª uI6عU)5Ö³ªÖU~\Zà›óNt)¤*:ÐÏÿæ2Mdn8O Ž[Ô +‹¼Ù§«”4E<¼¿• ó†OϹ¹ìÂ4nùª®Ã¯m#^¬[¶xGѪøµ ¡±FysŸ÷”!®±²o$½jÍ?ø$X͸ßt—ààûjñq´Œî}ŸIÄU¤ .Y¢£O
GÈ@´‹Ê`²ÐÞžÖ_ßžjÓe®¸Ü¤¤Õ¯Ù2^<£ÚèñF[^R9šŽÜKmºãqF` 9ÕÝ£%bžL' [%t@ÍÛr.½<O“@øKb¢–Åþbü 9sbV&¯ÍÆsÑŽ˜M<Y4 +l/Ú1虇WQyßÂü¡ÑÌaq
bà>üäÔBMW,ÊG +€^`‘è1”éJJ'$]¶ŠJK&ÙòDx¶LÿÉú½\ +¬ÏWÎÄa
. Ùhßã¸óFX´r§Û0m/Æ‘ì¡Y´xžDB!pÊZE©ÅT;èc·Èˆ§¼ÍÇe% ¸î”–d +ÛÊU4Äé/-Šoâ2ú< 5ˆ§ídº”Í60
p”£Â.4´ðG¨¾YpÇ7û¿ (rgš•E/ÿÞšl1Q +5á>=PFwäZ=ó۾˖j³½P<¹Ç£øt +çz¹ äÉÅGþîI>"ÌËÝiZÎ%U:|x×QLˆÿ?H*”À*äô ŽQº®áV° +û†±Ÿù¶°ôŠEÃÿJ>¬»Åï-á³Yµ½é CDÚĬëyᦤºpd0.ß-ï‚"§|SIÑñÌ߀ ’ƒ@=ØØ;dÝè%Á]†ÓìxIøÐaX÷ÅNÒHfÏÿo6ØòK©Íý|ÎD,‰ëËã<ìXqJ×7ñŒSä¿©C°(rjR{(1#hìPÖ +N!vG€ˆšxpv\+_•ù4@”u @‹45,ù´Î0-eð¾ñ ‘oÉù‡›±¢y·Òó‘B>3†e1Ü´ŸÑZüø@xü „ ¬‹Àß5ÅAºg×Äç°Ú*Dœ ·¢)ö´¦^£-}&y`Gõ¡õºôPÔ ÍK×× +Q ^plŽ•…U8ä¸{ €™Ûk5ó#Óz%Ûwј:ù·gò#ÀR#JÓ†BÓj#IhDªÇ6Á³-‡è\½†¸Šú×ü³˜FPx°€^™ª2a«D¬UŽ\;Ãç#“Ç.cj»¤’bפAW d¦%=áô ãB³- Ú”T8¨(ä"ïÙJå5ˆØ±:çÿf4ÊãV¢ŠTµËÍ1»üâ–³éç›ÈXl±R]ÛõÀ ]ÕŸ=Éy ·ˆ6ü˜å34:`˜1: +± VIÕ%Hvp·¬‰v¹˜—Ç^údwà• œšZ1æ å…n«7àvgÍŒ:-–®FŠü eº½Æ ëñe矹+Î^f¶T`1Í3ðÔfP”sðÑeR ÈbÕõÙÀnžÃù©-“g ½´Öâ%#ÑaÐ 1 fwd”ßx<c1Œb8›æÚánHz««4½¡pµø_Œ ©õÀ»—i.EÇ{[nnŒ<$P4Út¼ThÏ´ ²OËÆA…rbWϤ˜Á¼)¡yŸÖÅÉ̓5vÜ {rHOü$?ê¨E‡j{3_rÀ“¦] -K Gg,Û]e 4[Í4k)Ѥk‘ŽcÕ`4`ˆh6B Y,iq$«ŽjÇ`ÇuvqT„G¡îœ{å¨ëÏ£ì·ÐËê+ª\×Zý7BŒÁ
ÕŽ†àÆFwæá8†Ôá‘Î?þ”9¡¶ü8Þ„¨ƒjÎË0{K@ôõò´YYßvû$£”R´IÊ‹šq¶qétîtxv5Û?Üa±Á@ þäåÂ+’¸¾=IÊã䎯%²—‚ )²6Sq§ÜUª3_üºJ·JЗQ³ÖeS‘PÀr¸<z“—RujèJÇÚZ”ʺq–3Ì9Aq1¹ý7ék~ÐÖ줓uG—„Êùãzc$šÜ]9ò£Î>ehJäŠ #åWZ¨ )Úd‰àõ¤«xQâ
¢¢ÚDžÖ6ÊAÛ·*¥Á»¥É+ý<J¶‘u šÙ€jÑ€œàœðœ¶›ÙPM FÈ88 êéã£LÂ>v‚¶ib|rˆáŠß +víJOZi½n\Øéóجånª“7ýv{"L…' =.—†R-Ò\äþ±&åè•Žò™ªiïð„ +`ŒÂÑ ¶OåŽì@Rv
¿vƒF§{€ÏRœXª“q›ÃÂëw6þÑ<[ÃùŠ×€úJ¢\V{—û‹A8ÇØ)nwQ £ WUš¦$rûäÑù +Lârú¯•NINã?ðtæ‚ w<(hÞ×c}=¤bh*[S%²ziYï†u7LTj;òìÝÇ~’¬»|sî¦bû¡Ti|q–Âÿ!yçþ´Ý¿Êû³ãŒë„*Ló‡“%¼ùï$¸·& ‘ÿפ°v‹bŸu„¥y_ãmˆ&àfM~9ƒcàµ>â¼p)™1C`¡µ™ +èL‡ ß Q’âŸb¶ÆâÂQŽ +»¨> ÆÊêôëálâDâL VîÉRXÿüî ^¬ü n[—Õ4güÚ®"ž@ÍsÃþ™aÈU› a*8`qôÝнðú ’màL…ƒ¾ª5úl`å}NÎÆØ¥ˆ¢Ûškt÷ _Êp¡‘R§&úD±Åâ¯0<ÉCß~’0tüY@¶*¥ Ÿª K®•³ãe b^RBE•lÐJ—ºúmº• 1ó y¸sû…êî‡É<a"é%q>LŠQ3Ÿ‡ã)h¬ ΀?ªˆCe¿·Ø£v!Ý°'sê”)݆ÇVKuC”mûíÐËÁ,[Å€ÈwÈV.$슣Q%fšøíJshA•r +q‘è ¶k[2ua†iMl *Œ‚ëë_¥mvP·"“O.=¿
Ú/óN-€pWµBÔ$ˆxSJϳLñfÌyzœç` + $‡od +h«±módâ| ìM$ð
ÚÇ.fô± )Z >ÜÎðû“}m$—wÄNãõà‰}Þœü~ÿEàqj‘r$èª#ymKì½õ“kít06.kÈs‘Ð'c ˆýYvÕAÑ…zvµõ:p×Z@áïH<G<3ï€ ’R݇a®h<xøØö’ ×#33”ˆ^èS&[„§óñî~IÈ’[ˆ€Jˆ¼Ý~ºmM¿L‹§q~z\ ³-üh…G3;M>ÁXî<( õ£nD/û5¸ +SFS§ 6Ø?ÁpÛÊX- #ºõˆ8Ú}êã[´‹î¥Õm8¾“KÏo¶+\Ï‹ »èbh-Ãì]uþo™0«¼ñ¨µßHÓ¦MïÄh ßÜ7&Áx¨eŒ”UÝyÙðb¬ª¥V¹ñ6¼,°ê³¦ŠÏ Ýt°&2=ÂÒ1‘¨å›ùø²ÆìiÁ±6lf´%Ð!KÒÑæã< ä5G$èÚ—b]ú6’•=
áqѶõˆ¶÷Óô˦^vº“ë b%‹e?[ 9Õ8ßE*;â;HÉáS£(ó³i~eÓõÄ‘ÌÖ õ&hçUœ£¸¥dä^e +zЛӤDÜ0Û.`ÖMo-ÉÚ) ÂòË[bi™Gi_ j,NÍG…ÁMÞ—
wÑ‘>:¡gçJÉ»ôäuTj‰ù_F+¯äESA1¨Ñî‚`$AòAßS´yW¯n¡'° ý‘óª å/tB]ïFÌ“M½Å©†¸«Ì0 E'J¬X~È7pšSL.Üå¼£ú"_àwD†Òô v-z^7©>8˜¤rãÁæ¿ö‘[VWü~¯è%؉í¦Á7àØh‚‚™(r+äÃuçq̼LŠ7liúô¡Ažì€Ô}¶¬*^™¾q7 …:ø…÷×P‰Û M¿
ó©f C©ÿ7Ukâ ØÑ/]IÞÖ7ÿŸæÎkI$… äÁ)Š]®ƒzÖ!ú’Àñ2ÐH¶Ð®½}Žëa¶[ ˆ8×¡éƒ Ô¨Ùà&y‹:L´UÌ™w‹ +¦Ý_¯>»ŒÀñWO©4"n|Ëƨ\Iü“‰
ìo\×HôÇ+>*sœ÷*âH'©$%íU|9þH}4|¬Ã]w?Ž~’ÍÝK¼G„6ž§ªæÛXùp0wЂњìwÈâm’Eõõ+?'zWþÁV½ù¸iƒÜT r*àé"Î3ºEîÇ#6v¦‘B8Ü®'çýó¾€s@Œx,úU¦¹«ÚhÝN§Ib½=’îþ¹ž\*x_¶¨ÌXþü… Šîuxk» ˆÇGº{¤ +Fë:^$rðè›]ÉèÏM8wBót +ë >˜áÎù9åÁèlZ-hÊÁ d!Û{ǵ œ†÷¡Zšw×±¦‰Y®¹£1"Ö8Ü°9ÕX´uþ.AÀ‹$pÉÖµ¨[ƪÌýÈБÌ"Ú]©H¤#[¿–~‹oï6_Ï‹k3jœÌ„ñqÐ<ÇO2;\ùÉÓ{çê(ÑŽïã¬›Ý 5¬4j‹R _qðtÒñÀÑþc8ûz’÷‰öìq÷3¶é€(©ÛÁ?Êä°O¾#•kµŸ'Q hg”ª
~%ffÊÞÀeËHÌBš'å7IC$®i_<›O£ù¬
°¶H²=æåñ~»W ¥ôG’9Æ…LH'HžÊ×{a1 ²?–£.ËççO“ €·«çåÔÚ2^t“dTû³m¼7iIF[JSßÈÐ5ïwb¬jsNê 1Iü+ÜO3ÔžœF_ÉB]²;cW¸ËÚ wPÊjsÿ‡¤³›Z¯ÙøLq1(WŒ;F=Í¡ŽyáB.–<¢ V"’ªfŽj1Ÿ8ÁŠá‹TOä6DåkIQÜy#øÂi.ôÒ.ÈþOC÷¥\!Ö)û)?!¤õÈ·W@8l'.ŒýØT=šâËÿª•òŸâ ØËð‰È& +Âàæ瘓$0'Ü_»®^·'_½Ñ™@ž|£ ßßÎÞÌUíïf]žÔ-~T|Œ2Äêe®]Øp=ÄŽt™ýBÕá[Ú6Åãuµ;™ãcÑ£ÿeüH™E¨ÝÝ|•vü³Xëåf’Ñy¦´ nÎ9ÙIÓf ½ÄÛ‰Ž‡ÆDn¤.t@€º‘ÏzD缘RÊìï +³JÀ+¥nÀ½.?„²ÌD(ö àxΟ6ËÛA<긲Ã<IN( &[ô˜@Ùþ~tö/ÑÛP¨pÎfu] +î}Øab? nº#'<l§Û¼‡Œ2S[¦(1-Uû&ŸèÕDbŸ8A5h“Ó‚~¼ÌKÛ +ÂJ’Ù3¾U)ˆ8“¥c¾ÿQ-°µ¢eòÚ¤Ý5aeûNrÒ/séažù º…ª +KËÆ*‰~§ +BŠž¾ òÏX.v‡p)T΢.Äx“.~= X +ó š€uM:f÷¼Ãðý8ŽÎ9HÜf{"Eí±)†. E?¨G œ}ù~Ϲ¬bt=¤oÀýª¿œíemÅ
ÕížÐ*ßÃcŸj~ƒ˜q»¡@sC^Ä;Gòv®\ì"¥u`>êüb0ß@ÍðÅ”K +`8tìùÿmh'ÆVœj†ŽQ‡ˆ[ ¨%‚ªú=U{ÅZ¢.¸¡ƒòîgÎ ^¶ÃŸ±ìƒÄÌEG§zËn,ÄF¾Õ÷ê›f‡ß}ó\!Ì8çqô™ìþ +T-á%MØn¹—x{^|ny0zO )Ž¨£‡Óõ…NæG£CTÅï€L;Ÿ«Í4A%_#›‡Bx¾ëN €h†Ô¨ã…w¨µ:=±ÛóRÁïËoUÈGÜó๹Ožê“tÃdÔO÷ÝÅ‘ê4n¦\»¥%ªqCß
˜1êå ò²þ©ÞÞrzÏþg†|q
b!pÓ¿’ ãºâ—j|èÔãÝĽýÅ·iuÝ"«ºç!q»¥î÷ëæª8\ÌìJ·ÄºÑ1~qû-¼×XàzƒÏZ +†-fQn™ + +pµ9x}UU+ A4̯ËM8 ’~«c淅̘EÿçÚÄù¥Squ'ñ/Úm ú{; +po{…´ŠÒ=ôIÌv|ƒ‡[#[T +—¦ÛäiLËÑDÓê˜1WÁÞß$\xƒÝÈH›åÒEÛmìzE9¯èôÝ,×4¡ö§d<!難ØǤé¤zîì,Q¯ZñÕÕžW}c×öuƒìË'n|´æÌïèø<+ÎàåØ°Ð.+õZò ÄðQo7=~I…ô™ùjAã1ò§¾*g¿FøZC²›O(©-Ûè¸ûù ä.Î ôe‰ búé]®æ]¤û¶ìL=£ïFiéK…#\ ð@2¹œÃõM•<¸žwÅ çßGXµ“JâB²žàÐÅ#•|꧕ÏC!ÇË óšoÐÁÃ…"ÍÕÓ¸×]0Â(Do “ÂBXjnÅỲܼøLÈXÂuÎ%ˆ˜œŽ¢ð\`‹®JÉø=Ä°;®Ž’§"‘ãk#¦¤ÑˆM¸œÎú¸z%ö›âdI¶ei÷’Áøá’Ófs4Ôna—ý ä?Éo
r•yc„Ž… FæºkÓ«SXW(ÊM¬Æhö2Ñ=|ä²ê`ú.ˆÕ÷`&¬Ìð¯eš¼(-XóKN@=?6´›Uä(hyžÍ².»Q“ Môüª4xSE¾Ãâ™Gº–KîδýˆŸÍ NͬxS~¯.ÁZç^È{ðáD.Û1 6ë)w» Ö–äjøŽXRNN-kÃòÙH-¢SðNÛU†=œ¡Í[ŠÏ«o¦<"°6UæõuI÷0áa¬Ï=*l"¨¿¾æyÿ0A]Å‹tmô {‹ÎñÄœÁÜJÉ»©Ët¾vÏo‡5ÖC`‡3¡‰M]¼Ø^WŽëû‡É¬¾8•¢Ý[]«PnJ^ŒÔJÂE
ÕrÊ."# cü+æ'h¦É¨á¹J`+Ö
UÖ8(ˆÇHWøî¿ Ý[È‘M(~^¥ûÙòþ#/B»ø%5¡4 y…RÏ׆˂œÆ Ô[À‚¯Ó:í¿•J&7qÀeX®Æ»`;HÒv5]3¢¦ÒYxÞ¥ +âËß‘£"BFáê¨ ¿;
š„—CY°¾½ +˜5 ÈJn«Le/c,¦u1@Ë#ËQÞ +³Â +øº5×'uј ®/¶r7;G1(¡HCc÷ªbCÖ´y[Dµ‹Œg©£Îµ‘ 5xÇÑÚ-v¸ ?’ųÇ~J½>ç°Á…o~!™1ò_ö/¬hH¹Bg§0§žâ‡Û±,õü¹‘á;B¦0“ykl:× èµN¯Žó +~ÏÃ"ÿKÉlqʃº? +ík§Š´×ÂE“³w÷ë³qsS
žo”£?´ý$tí ¸|]ÿ×%æ|Šýpàº
Ÿ(Š/¾÷Q]¯77ùE¶õ²cd¿‚þOðoœap•¡ÓR˜,ܲh3OhåÉåLfÉõñÊëMeÇï´Ó· ÔÜ‚Èn’ϋܳH\Ž’ï*TréotoÂä |ožNmKçÙ¥˜„ÉÖˆNý|£[zVµˆKêF] [«Q*K |ÁIHú3u©ºÂïµøò
{C¬9ð®À•]cå•ÊêŒÊ ñ›B15!eÕù´ÆŒÿºk_±qÍÜÍÒq ź“«CZÍ¿_“0/&Ÿ:¥r/Ep½6½‰Âžì_–ø|¶O‚"ÌñuS |7¸lmÒgÎúþyKòT sìñÁn¬*õsMI>»wÔ5nlhÛÆ—¿³å»#æzæ™p6w7›B¦ ¤øxÎèÕ;=ÌêD—œý>ic\ÇÎ(î
÷âá8d›Á \Fq¨<È='Jd0 q +{7ÃAê^¬WçºÓ£…üÀ¡}†;—í
“ ÍÉVô16jšWšÝmo,lzÑâØÓe›ÕdV +ó"¥§üu±”î{$P8ge¡~ +U+ Ä#14˜3TÚý£:§½ÁAválªM-½„ÌaÝo¢4šÀŠìŸiIŒ 3×DÓ±ãÁÍíúcn g|Øj½}è:›.K'‘'¿’(唘½_^Õàëöæ¿v#…á2ÝVÈ›íüÐ þ/18ž?9ØuE/ W{¦“‘ü <º½tj€Ê «VŒ«êh‹µn»«€
»=:$ÆHï¾+YmÓßš²ªË7“¢©¾o©T#@Ñ'üÖì iß;Ï¬Ï¡× ²SÎ"cStQm¥œ!<V¿Ê€ð-µÒäÖ`E±»z¸ü¯Ál€F-bƒ”’^¤p}¦^Ï›,ïX;QCQ`8@àÂB_£¾UÐs Š‘©ï嶺Jß™K"Ñá‹üŠÉçy·ºøM@8k¹Íd’w +S~‰:e Æ<·†48§VF!Ê:Ha›».!qÄ¢ÀÏ'5äܸÊì@ @!Ç»±€¯Õï¡4¸©üîþÍ+~‡Þ ЇÉ]Ù:ksìd”¯Ç:ÌM„êc_2+‘T™Åó%[Z챃ô%XäR‡ +½ˆg8˜×Oc'yÜŒ6½¤Ou Áš½{>f[5¬íét§–ÖÀû r‰.+<G@R®RWÜÒéדuã?nÅ£z‚ЖûãÓ +O>‚6lŸ¼´P Á,ÿéàeO CÉ@…ØF +Â1ÕpI—¯3 $.¦Âž“®˜-™x ‡è‡Å2ç×uÁxCFX§þr‡µaä¶nÔÖS É9Ñ&´ÔÍðnt§’wÉ›ô{Ñuxc1]Óîoh³iºFÏY«ß +\… æo9†VÆ
@ uL +—;— »âµveY8|ˆUµ´~1ù;)=òTi@¤hC¼Ì ¯4:PÍ{OÁlSoÒ%NÚ€»ÙWÌ=†"S
! ²,
£RùÎxi• +‹üEÕÉxÉÙËœùÉÓå¾ÐC¾Ùf(5¸†^7£›ðngdt¸§jÃZ-+êÅ("‚§±å~ʢˤРÜ'DõwöI¬.O±3rSE^J"!‚ñKÇFŠÉÙ¹þ{$J¾23aÛáýÜÙ®SÍ"0
ûൻÉ69Áp‡³&ØF¥–©(Çs§$äÃ}ùüš ¾l?x”1sÝ—Žl]ê × €¯T901˜™ ×µÕ)OÆê—Ý‚J04E ƺID(H¨M( ¶{Òܺà @=VÃä-1IÖ=ÈÉÙ PwìH¸ ú;Ú¼kø/%Nõ3nñ ˆQã&E€ Œ)$‚X +%ÞwÔða[ÖÉk|ÊÉ%Š¾Víëüÿ:®ØÁq<ækZÊ<QBÖÃ9+”R™Ñ¼ í>ºþ¹V=M‚æ{ç+_Â>;„ó2ÕÝÁÔsbiÄÁ P?¨Ðö`Ûe¯A/b9éyµðÏ*;ª E2ƒy”É™[fÙÒW©2"r7›ÂÞ‰n\cþPnAõiFˆQÅÚòoˆ-‹ƒŸ*^]¾·Ž,àÂ%WÈÕŠ-·î—6¤ÓÄMCú|¡læðDÆ¿jòãø”V!ü
¼] ä.)pœJbÕõ„÷ö ¡<Â¥—uÔBGB¨ U²æ zñÐà…²SIw²PKMú‰*#_äüO–~óð^-a–„ˆ XÏÓÌþ£‘]ëÃA®#Ö>r=ö Ü4KÈ›G– •[ë˜ÄC—!J×Û\‹LcdH‰Yû ù¶j€¤ÖøtÙ# nQ‡·jö9 AßC Êsðd¤ÌHÛèAÀªÃÏpÓi1á®ùDj¨çå™êTø†-Ò»õƒzº©mV»ºýŽ€ÂSÿN65ûÏ™ "=a–`ÓŸ¿ˆ~5_& xÿwVñÅEÇö…08Gwp½HRIEHn²~.Nl±áòHðHæçÜÑ̹3"ÛB ´9ÛÁ_·Øz¬¡9³·m¶:xð±jÄ¡:IÀŽ2™“d¦=9Py/]‰ÇþjDíM=ï~”ÿÿ¡A:úè.R¨½Üל^W˜k¯lŠÃ0œeX‚u¼òz¾E›Ã宎¸Ÿh÷ÂT‰/ŠNY)€Ñ r(ûD} +“‹°z(œBé©Z&)Î8â[˜½‹HìɆéŠÊSN+.$AÏKÜá5é£ã?ŠCƒž}…ÝÍuRÜJ µ¥,,ƒì8œ56VÀ^a›Õ á›RŠ\˜OxUüï_Ìð¹â]·ºPÜ~éüð;.œr“cïËwbì —Õ½dŽ3*äjgIÝëÉ +=û¨³cL‚¦#ì_ùƶ¶Æº¸?ÝÁŽÊ¤j#M1/ÆÛáÆ’/‹Là=‹XÅ=tŸ +Ä踿‡ÏXá ï.控/¸9^ƒVMyƒ…4:†1þUñ îCÜh òÆîx¬s9 •-·"A€Y~ kèåô¥Q~ÏGév™^¦ ûHàèàÛŸz9¹@´‰cy™°â1 +[Hùßá *SµG†mØGÛ”%ö³·, AEÏÜàIVw6(ésë¶Ë«S´9@ý‘Æð»ET%ýv <ƒ†øòIÜþŽ "Hö¡:´æ¯Ÿp¶;úô5?‹zùþQëƽi@b\;1eµdÜa¹ðy‘#^Î oõq›ˆ„²„>4&^E1%ù¯ ˜uqDŒ›«a©‚¸á¸D: t“Ç”0Ø´…-h…ƒ`ò(¬ãS$bÔçR]W“I¹T+& +6å¿rûJƒŸÆ+@w–GVÇêöJêüßõ”u!2{o䊔OL‡ÿWœ‡í[–Já–lbbYs‹ÜoÙÎkâµ+×@f*ÂEæèËš„yâFcÕ}g‰* °Vä—ƒ-1`=Y”óeøÿö[öXL0ƒºGÔ+ô²zv.”:€Yn4N_x„΢×øó0kØT“+|{d¤Ñõ‚H`ÿ³(f0jb[J½€*äKks‹‡)µe$[ s“!N@ ä·z–åÌWÉŒ ê%Ð+2/¯myuô E9f¿‘ÒMOû€€T|G—?r뚟T•(VU¨ßUm¿í5Ž‘#kÕuO„ ·Òp›×?MT}Ù ¬ÛDKcÂT¦›—Ê•KËÌèS åׯCD0–†/ìú-iíSö mz©duÏ.QvkG“» \) µÉUÏkD^„Å‹>Sî9IÑÀµóÙ|—ƾ¤£ #ñÌ¢™a([^ ƒŒcw‰94@?€T“ +Uì?}ÑÙ ¿ýNwÍ|
c¹ñë|X¾–xYKO½j/âeEƨ)‰FcCz‡?à +CÀqš5úpHˆÌ£›ê…åA! ¡Öz?t2 D=8Þ¶³…[‡½PzÔ÷½ýQH×’9ùš~6'm$#d†?æ®u^,äÅÀííªœ”žvï¾Æ$›aœMD³OÁd³pw ¡Ž®´¦D çýTÝ?7 )ÈÀëùñ ¢bŽW¿Ö÷63m +#b4I ¢È_ɦ7*–@¹ž8C[îD +‹¼ï¬}"ЩÜænH^vj'5Þ‹e·?¢Ž¿&XŸNj'¶Én Þ{¹ÉJ
LA'3|a빆y=*‹Å=ÚT¯8ajA›Í
)¬´B GR÷Q iKš1‡3ð>³¸ZÏ[¼È²m-¼ÿKdý¼¬ÙjÄ,n([]z …+âìÖ8(¸J šçsÕC›ÙGWb¡qÖk"—,=/ƒþ ”ŒSwêûbÇÃÑQšpqõrÏ7+f@9Oæá‡îé§û*7ðzAv« ºK´ÃÍ ’ôSò_"‹Á)Ó¦Ï RÓrDM)TAjý:(ESG ÚLÛ#fEù?’Å|¢œ.«¿ +…Vy©²cIé~¤´µŠµ‰ì +¨ªÃOÆ3BHW²•v^ž·þ»²y•7¬ÃÓ ÄN@6½<)Æ豺?Kî™J²4¨,rQ1ñ9>:ýÏàìx`xßÊ© °5!owÉ®ŸAhÒ¿B6%J[P’ pX])°«eW:®:Ó]å=EëÔ}³ÝŸ/Bb +ï(Ï°*nr!CI÷ðŽŸ ToÙÛñGwmQT§ê@ßükÞ ÆCZâtY°®“0@}ЪÚ<iR
ŠKveÙ úVvÇÔÃ+v[ ‚[†ƒVt ³rÏ7hx[ 6 %¾ÝYgŽ%Ïb¯3’’~#9œÞÔ¾: [)9h B¿ECÕ¹úm ¨lù£àzvļä>»â×jÃöq¹U”ÐAÚÎdí¿µy ¨áÛԷ裏°%[’÷^,É8Å™q¹ž"ßMµÇ¹¸V• +ë/CÖ7YßÊ›áøÞÎœíz¤ T†X6×Õìtñ¢ÿr°¾œµ³GRíM>S%¾+uÌiû¥ïðŸMúa)¸wç¼ ž ÷ä±/$tÂà®[ØNÞ;pkX{ +“zû(oŠ-Õ¬/cÌ >—3LÃÿø¢?Æ4ÈŠ¯ +æݩĦt‹ÄŠ;@ÑÃH¡1 EuuT°}\g âr[e""<³ÀsÁq#¾S€JY÷aú,0§®(l;º{‹î2²»S׌TÙ±1ôp˜0Áñà%,ýˆÆ5,Rª”å ñ… +礨…å© ©, ù—q¸l/Ùž‡Í6D¡L…¢?’a°NøÀŽ„£f5Ę́äÐ?pUæUYEø^ƒ¼„¢|qd4ññg2úñêÄèå8°÷ðÚ`nj-°g)šÌÔœ½8 Ê +¢în-ÿÙÚZÃ3¦yþ£oDȼ߹e>mTåË)ðäkzÑš¥¤´êƒ¸í4 á#ÝÌšCo^5äsc¦LUF +fÜÊbÀkÑÍ[íõ—’|˜\î?•«r†F‚<ÂJJïå ù¡âª½„·I"»=ÅA° ߀A¶2VÁX|¹ I o–+8Ò»¤§Mkj˜¦Ž„¶-ÈÇ0ÓÜ`g¡*o×ûQz¬•ÃY6yí×®¡æDAÄ„ÖnM°ÔýzÎsasôÝÏm ÿvCk pcDó׉ßÐÄbÓ‘¤•ùÜòÐ + ¯¡?©K×]_ïª ¹? +á¶×áåçêi9x'$ö7>5\‚¯™Ãöl§'5v € +ÃöÌ_ÈCçÀÒHÓÕùÏKiÒXÞ¨_—®3ïÂñ“Q }ƒœDt @UKnÒ BuÀŽÞM!œ 2«žW®"f‹”:uûïS±Ð‹"Æ´jhº)™ðÑ¥ºSu‚>ç·´ +Iä:¾ëвôòmí^ë–m!˜/r¹•©‡|OîUß/§cºÈjãA7šbÙ×®äC埮˜°~ùc¾'u5wa:ø«IE +ênIÊ«‰M~|Ñ+Ü®ÀwŠEÔr¢:8NÛ…1æÌãÌh\¥o“¶MSùm8ˆäH|[÷
Ôƒ%ÚâÚÜÁ®Tò†³¦†)Cò øöî)ŸÀX¦’ +>ÜQSës 5„Î~VXŠ‚lÔuOñØsÀ)§´Œ_: +U‰æYÁGxHeçÑÒ‚ T«Üy^. ˆsU€FWÔ>a”Xþ¶JO=ª~9Òz7"C>WÒÀ] eã© +ýwy0LŸh îQpR´±J’Ϋ¹’¨W£Púü8è Õ(oQ‚YÒ`#Fr 5fT-›•W/¯à ûqïÑ'tʬ²9áTì±NB§€ØXþÉ¢ ô^»žDÙµïb#㙽z(hn ¦”J¬ÏlÝÒã#X¼“Oé@0à³>$ ]è%–”O·ÄðŠª ¡¯4)æ†ê< ÀÙ?;Èb$”™ØB•©šy{}^[`åb65Ê$¯.ŠÓ›çÊS«×ÆuÙFΈ¶TAîÒî¾O»<]ßÖVŽÀw(SDB±¿n
2ùc> +Ý?ÚÒBÿ]ÊçÛ´Ž=W{l‰Ô‰1¯ÜcÛéÓ0‹žÈbU£Ø`Gå•Äý“=ìÊ-ž`]c\`PïÖ)òë¹×êËña‹5z—ß^¹ÿ ýõ YV9Ì? ì¸ y™É‘[“Âýäî9ƒøVæÝICÀÑ(`ÜLöÝ|ÂzÔ¹d…DSÔ<€}:Öý§.ÖÜãŸÎÛ”ê7 ^×¼ê¹b +;šÿŠtYa[‹ŒîÞæJ”0-³³ù"ÃVkVÆž}Ý+3YðÅäë“
ëA[cN +?¢í ¿£/¿¶¦ÉªÚK§ÃLÝ“?ÐÁ 7#þ<_*¸—ô÷÷ãûË7
ÔÜ(vÌôñý«·ÝÌXÝHXäÿ–'ý÷Úò¦©ÜÃâZ)—úâEB³$/ÿ` _Í+ÍrâÄ;úë,‹*S‚·ú¨•®,Åuwë +['÷>ùÈì"Œ3I –fñ¼@9›†ìÜã‰vžÈ‹’Y—‰„E¬ÈttµÀ_.W…hL4Ø$¨Ûí´i…F® Ö«_ž²‡šr2!Oéö†Zp» Ú©4r2eóß™¦ó ‹®áZw’Á[c»®ÍDHí'bŒëÁœ– gf‰z f¦lnâØ¡ÞÌB×~ªLIà—ú9Ô û ÁƒLZßaQÈÅ gËÂ¥™0–Ó¤™…üêh¹ÌTȈ¾‘øì¹b¡’JÔúÚr½–[FÜ#Þ¶ôˆV|`7:C=µ8¦~°i3"ûy §ìÚ¹<vm¥½òmãZÎ’\ïy24ê +œ+Uk_L ú"Ç€T´|NìÅ<M¨FSÕm|Éà–R5÷§5¡×·c4=ÄP®dõ™@^YUú£ø/…¢3/!ã ©¢ö‡e Aƒ{Êÿ¾žüÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿLARCHIVE +u +f¸
+°ë°ë°+f¹@ +fº +]ÍuYfƒâ fƒæ?f‰÷œfƒÇf·Éf‰ÖœfƒÆf¯ñfÁþf‰ðœfƒÀþf9útf¯ùfÁÿf‰øœfƒÀÿfÁàf‰òœfƒÂÿf¶òf ðf‰ÇÁïf‰Ægf‹UÐf‰èœfƒÀÔPè +ýgf¶EÏfÁàg‰Eâf¸@ +ŽÂ&gŠP.g‹K +ŽÁÀÂ&gˆPfXf[f^f_f] +g‰Eîgf¶]ñf…ötgŽEîf‰Ùf‰×g‹Eòó«fNgfUèëâfƒÄ f[f^f_f] +f¯óf‰ñœfÑf·Àgf¶uògf‰ugf‰] gf¶]ófÛgf‰]f[f[f^f_f]é·åfXf[f^f_f] +g€} + +gf¾Mðf‰ÊœfÂfƒÂÐfC.gŠgˆEðˆÁf‰ÎœfƒÆÐf‰ñ€ù vÉëf…ÒuÆgÆEï0f1ÒëÒf1ö<lu%f‰ÙœfƒÁ.gŠC<lufƒÃ.gŠf¾ +t'w €út5€út
ë €ú
ugÆ +öf^ŒÈŽÀf¸ +„¤wg€}ð„0g€}ð„céVg€}ð„“g€}ð„ÞéAg‹Cg‰Eìgf·SŽÀf¹ +f‰ÐœfƒÀ"gf‹}ìfÁçf·ðf þ&gf‰r.f‹6LIfÁî&g‰rf¾ìA +&g‰Ff1À&g‰F +ŒÊfÁâf¸d= +fº +fƒÿw +fGëf¿€ +gÆEë +°ëgÆEë +…ef‰Øfôf[f^f_f]é è<„ƒw9<„Œw"<
„m<…˜gŠS gŠCfôf[f^f_f]éÓï<„‘<„šés<„Tw<„Ü<„çé\< „<O…Pf‰Øfôf[f^f_f]éÎögf¶s f‰ñfƒáf‰÷fƒçf¸@ +fƒÊg€{ +ŽÂ&g‹ + + + + + + + + + + + + + + + + + + + + + + + + + + +@ +@ +@ + + + CONFIG_VENDOR_DELL=y CONFIG_CBFS_SIZE=0x100000 CONFIG_ONBOARD_VGA_IS_PRIMARY=y @@ -1405,30 +1432,31 @@ CONFIG_PCIEXP_HOTPLUG_IO=0x2000 CONFIG_SUBSYSTEM_VENDOR_ID=0x0000 CONFIG_SUBSYSTEM_DEVICE_ID=0x0000 CONFIG_POST_IO_PORT=0x80 +CONFIG_SEABIOS_DEBUG_LEVEL=-1 CONFIG_DEBUG_ADA_CODE=y -ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿLARCHIVE +LARCHIVE #ifndef __BUILD_H #define __BUILD_H -#define COREBOOT_VERSION "8de79fe7-dirty" +#define COREBOOT_VERSION "fed34f36-dirty" /* timesource: git */ -#define COREBOOT_VERSION_TIMESTAMP 1637165859 -#define COREBOOT_ORIGIN_GIT_REVISION "8de79fe7" +#define COREBOOT_VERSION_TIMESTAMP 1637149899 +#define COREBOOT_ORIGIN_GIT_REVISION "fed34f36" #define COREBOOT_EXTRA_VERSION "" #define COREBOOT_MAJOR_VERSION 0 #define COREBOOT_MINOR_VERSION 0 -#define COREBOOT_BUILD "Wed Nov 17 16:17:39 UTC 2021" +#define COREBOOT_BUILD "Wed Nov 17 11:51:39 UTC 2021" #define COREBOOT_BUILD_YEAR_BCD 0x21 #define COREBOOT_BUILD_MONTH_BCD 0x11 #define COREBOOT_BUILD_DAY_BCD 0x17 #define COREBOOT_BUILD_WEEKDAY_BCD 0x3 -#define COREBOOT_BUILD_EPOCH "1637165859" +#define COREBOOT_BUILD_EPOCH "1637149899" #define COREBOOT_DMI_DATE "11/17/2021" -#define COREBOOT_COMPILE_TIME "16:17:39" +#define COREBOOT_COMPILE_TIME "11:51:39" #define ASL_VERSION 0x20210331 #endif -ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿLARCHIVE +ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿLARCHIVE MAINBOARD_VENDOR: Dell Inc. MAINBOARD_PART_NUMBER: Optiplex 760 ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿLARCHIVE @@ -1794,29 +1822,416 @@ coreboot-%s%s %s postcar starting (log level: %i)... - + -$ -‰Ø1ÿéUÿÿÿ‹Uä‰ùÓâ9ÂsëCÿ1ÿé>ÿÿÿf1Àé5ÿÿÿU‰åWVSƒì,‹E‰Eà‹] ‹u‹}‰Ú…ÿu69Þ†– -ö„$@ +$ +°óÿK@Ì»"nû"ñF +otjö>eº4•WQV/Kß3áîSy +áÞB•‡^Áæ«)ÒÒØ!ÜáWuþ«ÎGG…hy+è*æß°UáéYäj‘¸ÌD‡|¢ä« +g8Í/½¤ü>€nST>?c.–ÝR±V$t»’bšêK¾ˆwÖ>á?m³÷o«nõùqS´dVÌ‘ÑY¯à°ò GR& Èï0 •Õ®? -äôÐ.cöÏërcU›T‘V4©ùÞ~·‹u¨»ÆôuðÓ™6smç<¶¥Y` @tÓX›ˆ“™#áÆüŠ+˜tFH©¤‡ZKN Œ ‹u‹r` b¤Ôæ¼j€/¹!¾ä$“ƈô2 P¾?«BµD +¡2BV +2Üå¬: +ìJvy% ¦¦µìL݂բК"az&ù|#›¸¨q¯ÇèAÃøA±ùìÖÔÄ…{A"Lÿ›Ì’ó·ÅmÒ,U§Ûc{œŠÂ~’“ +&}›ÐÃ|ÁõZ€Vf Š +¹¶*¼–+Û³ôd +•3cuà¼EbŽ"šÕ`] "h–uªÞGƒ`Ú†Ìá_QÛƒÇiŠ![« äÿäÞÇöX +%œ&ÚîÁJ¬~5‡ü†4./oý5+ñÎ';~¡ž¸ùg£‹ !%Y¾ª,°7‚ñ•qÇ-TÕîEQèË|à'BJlþIŸ'‰êoWŒÄÚÿ”NØÁ‡×ۡЙÇïÊüò NÓš[[ ŸÕ-RO9ß6J;ÿCu ) ç6fd‰l£lˆÊ…¦¢[u²ËäO&pM.¤+õþ.Z™Š#ëƒ + ò³6¥T±^r•‹ãJ¢M’åg'^ø¥Ì ª¶Ž‚¦3“™ŸÔ æ½Ý‹z"T¬©—I\”“šc¦êbBc.\(ÀT¬¨³8Ìs–ž‰ƒá•|#ÅØõ¢ zT–Gj™^c‰³F¢p¬[=V^ÚÊê dZ¶ ô|*)"m¬d™ò.:ûF12…jVꢌEß|ž¢øôqpþá~8µM+yõöÁ™°û>U n ÜdòYâR`A5Àéÿ}x™™t$¤L2ú¢tBê*öŸ*LAê]„´41Cnj懊³‡%ô¶“fI[ظ¦-£[7ÂV†Ãý÷ü'’‰>_¼›¥ýãë?h¤»ŠFDµå=¸'x" Ö9¹ ‘‡Db"ÐGâ*è!Œ¶ÚQ~-\@ãf† +Ð*qy4ÖòeÝ#òî¤ö®ŠÌ%ù˹쑵#]?{éað&}9aâ|®ÓwÝ‚knµ‚Îtí1kiŸmèOþ¡¹™½g²9’¢ÐÚxµ7Ž¿&"Ÿ}È©€4ª¥ Í›ŠQéöE¤Üå-…ËŒPq%xʼö|–¶/¶ˆ¯í¬Œ€®³PÅEÏÕ˜![€‡"
CËÙ‘Þº2jP®Ë,N )µ¡]#ßc¸÷9¢+EeÈŽP \¾£Rn¹ý€Ù!è D@:ØK‰Ð +³úÀŒèã¢ÔXšáO¯7¿]2²
ÚÍÀE„ç[DÖocÀ‰%%µ£rÌ„×8§ö0¾6,#¡{Õ Xäû×\ØÛYêI’ûh0¼V—ñUî +;ïX¸g%*ÿš¹¦öH~??(Úæo½D_®íÐ<‹(Æ%^Æ/sã{â׳êæt„õËJaÓÆÍ1s{Gšd»¤‹(ÒòS"I:Q@â¨EHG2—æÄ + µâ`é¾ÞN,…œ®7‚ä€4Ñwº§TÚ6M4¸I‰¿L
¢6#°“äÌÄŒ+²ÝQY(› º’ž<–LE,µÕõEhS LôFxÅpXçíiÐó œãúÎà+÷4{f=Xù·¦r¼ÛCkÉJ”ÿ +hÑ·›¼ÂvK{¹yô^õþK`óôÉŒô1EšPp´˜„´"‘(ÿBåB–õê5¹aNÆõÊ–fÚVËjîŠV %¸£,1«kÊ#;mÿ9²`÷§$J¦ÍS¡N„ +ëßi46KžMð‡ZxcÕé=€ä ÂÊšÞ‰ÏzË6=Þî±fZ ùª|,îó¯,£²eôW`Ž ™½œ ™J\ªh5^ã™,¢Çèì´´¸¯â“sÍoešWÀ )ñ¤–zŽçÕâ—Fåä„˾GÆãŠc¯qR¡z[Ïþªï´V³;q[Ü}E¶ +ÀñŒâ
ÁŠ¬Ô1C1Ý!"IB‘Iï£i¦Ýo±öè®þºæZ-ÎO«mØ™ ddƒ+ÀˆƒCâðýZ«y2¤fD°MIbdšŒ²Ù>ÞHø ŽóETG± ÿŸú ÕÇnâ–˜n®™ÅósEj©ãu«úê™9qþ~ N™C6jﶸ)o–Œv0¸^¥šDÑ q—µQÜõlü·˜auæõ,“žŸp£¥g2gD¶%Æ.-Ž„ïÎ C+OuФò¼ ¨ú>ªÍÊOÌÿU¨µê VÑŸ± y¸µš U)"EÍP.l¸OÞ"„ßÅ^‡†ÚËÌ/Åa‹J[ß>~ENµÀá`82ס·˜ €sË m“A¦7îpìï2®çnÔÀ Ð>0É,•×ív|l 3d
J"*+Ô‹(jøcÝö»Óy8ìf¨¡}Ÿ„êmS±ï§)¦>ìÞôJê·‰ˆÀѳ+|Û'³GY$ý@„ Ef𔟞÷¶{ŠéhŽýêÉ,…¨Yëùñ>× $±gÚ”OAät鼩½¯™Å+=¹èÍu•IVÕû©_¨Ò¬•l²†€_è[èdOóDJÿFú˜¿°²?gê—žX±Ì½E)í„Mc»û +’K‰
õ`åžóíPØü¦á™¿F»ÍÒ3&É(8Bl+q ßD<¨‡z8GÜ´ÝG0ÅÅy µRÅPé*‰i¿ ·_n¡V +.{Z)Ô9ù8}Îw‡~´¥J¼Yéåˆ6˜’lܳ¡¸[ß¼kyù}±üFŠnz´¼ ªrÝK5 3:yà¨O’l´¢½ +†xñK¸tØCíßà„o wQ¿"æ8‰~iŠõú ¾b¿<ÁŒƒ¤ìKöÜŽÙ<•2•$‹/nÄt=ÞŒ9†êÃ_§<FÂH™0±õ;Ç}Éáû9#‹¹êC}Hjž¹ Bsô’s0x®uãu¬¢òÓž“q)ÊŽ7CÙ¢ r€ iÔËêaÐ".½?¦ª^\ájà|QßzÔ¢Ý {d—°9±\[º?õƒ À&±kÑчڻ;¶œÊäÃ¥º¢É
ÚuÖ‰c–†wŠbb—ã? °K¤"-«l®Üd‡)«ô©}€žu™” Æ¡ œõlŸi8Ós … 8j†‡øµ>”î
¬Í±\QB +rHÚ!z$xŠI§&ùìP +3wOä¯ ‹þNÂmÚ-cwÄñÌûF‰T†}Q ]¯aH¥ ¼?ÿvW²DÏþfRl¨8 +—:æí¢ pp)NG ¹žiñƒìwÏÐŽgËR¢¹|ú's8 ~ÙõD&Žïxì¤IÉUT@Z쪡K®´ñ›´]&Ê¥ùÛ BÊ„”:cU9j™hç}E]ÿís½ÇZ–. ø2GòƴÀ_f1ü/¹/‘óJ(…ŸãÙcå»Íh±ø‘܈àf-˜‘ÿ»¹°áÕö~¡ä›„gOÚÊ +Ø!Úqàtìƒ@?GÐùú—àÉCDß°Ân
†Õ +gb¼‘#Q’ºX &—–ï!ð½Ö¯HtðŒþO'ߦ&ˆTyBZæ‚Ã9iì¿A„…w¨ÿѾÞG¦æ ~†’f®ù÷·É®iñÆÀá`"üo+Íœ‹k>YX}¶¾Þ&n?’,tÚ³ +P½¡¡çªàÚoË̓D³\znÅK Û‡ +áã8àÜû±MŠ3`Bî—-sWx#–儆ó"ô'kA»˜ºVE%üÈ° ö á +vά¹”ç +eþ¡^Ö†PvZºW[Iè¢@!Gˆy¹Ô¸)÷EJš¨ë!^|›†ÞѯSÓæE¿^ š¢¼'
.Š\¸¾™,Fóü%Ô¸lƽGáT&þ{Œ<ãéŒyª{ƒøª a¼ cDÏ4&U¶¶¨Tñ׋æNÂ1 (7^ÇjPHQ?ñ_çû–/ÿ¸º Þ¸«&/ Ñx1XÅöE R‰V1m†‚Bôƒ^ì}Oë_6Úe9¼aÊÅ' ãBÕ MI؉`Ò +‡x:õ×À—}rR.Ð$Š‹ˆ›Odîd—”#ÁÐ6 +Bh]ÛQ;uêºÎÔ[Y9F÷© oI XêmìßΟÃAŠ)š®ÄO¤Q¸ Ÿmðƒ\â:¢ w›µ] J2æp[VY®¨ðH]ê}ÍÕÚbÂü‹ôY8•ŒÈÇ¢r¥ˆ‹†ª¹¿£Ì¦Àwª1(â˜ýDó‚Œÿ·Y\TŸ Ó“S†ïZç¥ÍH6‹ yü:Ì`ʉ8Úõ\ê¥'Y 5‹Íy„m6©3üþh£Ç©W=QóZ£w˜®þ š–KçŸoqsêštå5§O»®!¹ªòGžˆÈ—C‹*NÄŠ´ížÍÜU”ÄÀŒêDu +û·r›7]ÛmÓYmmöó×4È%ÍË<ø(kˆs÷+&»2¢ï7à©°Þyö3ßb¥xh °Ì’ ã^+Ç—"¿"‘š|@` ňß@{ +N\_mgSŠrÝãp+[²3:ué¸ê+«œ©Daþnuã¨a¿ˆm
½ úN‡èU®bè6Ò¡‡¢2xç-™ûkp†vfÉò‚Bœ}õ›q°’H÷¬š*Ñh˜ýs¹¡sÚaª§'b
/×<‰á#èu%KRµž°œª¬bxÅI¨Gcd `=4 ǹ<Î/‹:‡…ËfZã%=z•ÐD¥È;©£uƒÍ ù*WÇâ i$vòó+gè¥ Y™JêÛðbð<$B“”ŽW[ð|YOL D’×èbÊZ.šÂéPW£Û#ýQÕÀF¬Wã ÐËFÇ;Á'‹¬y,oÉÏÀ6ÕŠ÷3J]Â? ]i9ˆ +®F¦ò¿”.S\ß3 ÷äþ¢H|os
™šÕ Ùò]ˆƒò”Š+ðÒð;¾.çc|›d
,l®A½‚¡Ÿ!Mþ/g4 èpWË˱滰5ðÉd©AX¬÷“Vë« @¢× IS
9ý µ¨Ð‰ØçVrüÉ盼 ¦«×Añ¦õCó:Q5ÝKRoÆ.u«†Ôãq:Á°»ËsÆ` Û0u›Î±ïAÁ]ß}!w®Ã¢yÀ3í§„üÈç9©’U)¼ì³ë· >G’ÿáéÎö/ê¶w¹â‰ÆBó‘cA (7;´‡U”›™5éù„$ y!ƒÝªU9áÝîO F¼K2o|´ƒ†ûž¦a‹¨}îÈX¦Z׌oЪ¹~=*ÐG¨
;ˆ@Öî®ÃÔò*v‘î ð9”'ól¥8è1WñQn–1„f—‹· ióι$öÒ< ÚS鈫g“sømgÂÊzI1³TZ<-¾ïÈ¥¥ÓÀ/ÒÍ㸠+‹f:úÎ k'×þ?æÖb?÷ÀD<uDêbGnݼ'r0¶>§2³ýJyëÑëevtZÙ˜5_‹ñ ³:ñw1LF:NƒÞ¬ª†piÜ'´´£Ãiœ«Þ1 Õù2„\þ%Å–â¢4ü¯J‘"2FuòÚŠ˜ç>yL +ìA-¢@ï<þ«îÎÅ8ãÇ°ô¼bH½FÀ{‘ì*¤D#íšó!:=s8ˆU} ž³€·ud83óhµeÈ`žþÊšËÇ‹7€b“Š–º ®t`fjpÜr>JÀÖRø‰¡& wûLú‘qQuø+ü²É]\TÏ£kÉ[f‚w9ìT#¯Ê[úo¶Ôe´!tÙß Ù4Ð’~‹A¸ÖHc[}OJS°®je«ùèøüæø¶ 4Ǩ:Ì~öa˜1ÁP l$ÀÉ Mjò×µEm¢îãý5ãVá8âô8æÝo½—HõÊé ›<°B–D»„4 !3@NÉ ¿¡’ o&E±JY åõ•Ï<rÎèmŽW«z0º€ûÄ_~õŠŽâÁ¢Ïàœ¸:ØUÌy<éZÏ^«¡©‚˜Õ(¿z‹j½bH/ËK®ÈÒ‰Ô×ZäÚ˜ñåOðÃΤËØ$Þ8$-)õKú¿b @‰Ë8×LÊYÆ_‚›’IE0jڽ㱲Ð#Š>ÒÆ"ïI÷):š¼îèWz¨&JT´µ»Èu•”U(
Fkmš÷J¹9«üfÃE¢·Tþ÷óty•4¡:0Ü9˜IÃBhSú:ÏÖŒý@ z<¸šIs6uÚÛðL47G•”íeGñ, 5I™ —ÈÍXŠF ŒïÛB› ä2„ú k¿·6¶)ñºÈ¶íúò–ðI¼Äûä/AÔƒc½°”b +¹û³æÙŒ&:ÇIòÐÒb}Ÿh¡û.ÌW¡¸Æ¹á_bÝ.‡æËm8iug_·ÊûuF„"òëõŸÓ®‰§ØDêF Fšu!8ÒfjF µ×‘@ãßí*@‘?Ž± Ä(o¦r +¯l@MÝõ0ˆ¾TN(èürŸ`{f¥“» ½ Àë Šqy5b7Ý"rÅ&`%âÀö„Ù¢¶°rYI|àT,>½ò;’|ëR +qý9}¾<Å ÂØ7ö¿=^/IbÑFC˜wŽœBÚ…ÊßmÜBÜEb4¸“¾Ÿ€A†®.BQ"¯ûDhU¼° :‹, +%JòWAŠ'f¶4‘—ïã‹ î¼³&ï[…rK
ù„/P`)äCÇ}Ð’Gò=Ô¶ šö̹H× càéÁ»ªÖ
þ¸»ö“âÌŸýÆ,Ge 2ôPók9Qð–1sE®¾<}dèåÖ†væáeL V)&*©Ðí ©È‚Ò244 ‹^• VI
,y + jëŒri +\b ©1”QYÂ¥‹ƒK“² -ê÷1žT5\½¾G5:橽zw_$ô•Ãs´8iÜò„¥*åôw¤F¯=¶y 8æHf¥Žöÿ<ÑÀê=(~©[ùŠ×'=5Ì ÿÖ9n¶RXðýÞ°…;ìÎÍ{çǀ̤yšÛ9TÞ Å·H–tÛ¼¥|·Æ¯:;öÒØjºç›ƒRXçeÄÊ
:ƒØSÝÈp ÖS £2ŸzçMÕßíêÊL}~D?J9EÁ&7ScÒ ä_âW
ûæñ…iÏƒÈ®Ý ,¦ƒI°ƒ¾¼6)lk;9ð†Wvæh·dZãz¯Ó!s1ì´¶„7®¨pÒ +fŸÁͽî0_6œÁ@B(€ø-Q±åHõj&…àò÷o Ân³k×pˆÁ0óHz +në~¾<¦öÖbûkŠ8„µ·Ö –¥ ûR gW}ö[·øC”,ò'Y)••`Ä+2õúÞ³ ª‚ƒ×É û/%Î;P +¹°éýã' "FîôqØylöÃh„ º#ˆišKàµ÷rì¸*8:ìDê7ã¼ñˆAi‘³Àùu +–>y¶ºé¥`ÒêTÉoüèÆôÖÿ6ÃpÊï’Å×'Ô¼—”øÕSÃd•õ‹ò'õ‚>=µªÕKíÈýâšÀÅ®ÕÍñ€vå¨k¹y•Eª§ÆCñcy+‡´á`‹Úµ$Ž©ƒ¡õñ±}´uk¤ˆ…•UܳoÞwÙ,ÔØy_•1J®và|ê–£~¨Øiè¼èî
'¡#$ÞQ1Åä” Í^YñÀßYIÅ +ð1¦ãpÆÿ/4 >Èa M.àäNûÎX¼–¨_@\´ò+›áoºÆý v¹Šqø‹€õ¢Ëµ^’ÁÌ7Ô^n¾œ\bïÌ2–ÐO¤ë +Ö‹U'W D÷Å<ˆ#í!NlwX5Çœ^of¥¾ ã
ÛèÞû/ö,E +l#}s¨{Ð
I/–§Oã6)jgôþ{ðI“r Œf1DÓá8v:ó’*Ÿ;ψO1ÂnDËò¯þÁ£mzÆ|BhŸcÝ•¡ù’ä |XÐâåÿÒA-¤ÁÜ $øÝN`øÃèËr1XÜÃõÚsÞrýN›ˆ=•€`GÝ^¨qÌ@ŒØê¤á +WiÓrž-Šù¹tÈ ÃvÞ] dV¡b`w›kËvì +ï0 õÕCôLvWg'΃(Y‘̶޷èoR !äð{§K¢¦MÄ-|"¬äfl’C Lu¾Ñ5øämÓ áöáIjò!‹ \ +ð6‚ùÌ‘w"gT5'mœÓ 6±~h‡ 945?ï‚TUш*܃š§ž°5E¶ˆ“¤É—IfØëÙîÀÔ²š²L5Ÿª¨:ª]{镉¾ŽT3ÄÊí¦áªýt*aB\¶Ÿ—åÏ`|/þ% ‹Y¬¾ž§Î:8ѧ‚ŽÓ: ¥.D*+$¨Tò»~D8°>|zl®¼ô®X
èÁÜ¥Š +*™ãÞá:†Í‡Ø\ù\£ääš¡BAp)ÉC-R¢|µ›ZÛ÷* h+“zÝéúÕ
%Ǽ‚QHj¹‰ +kn\µÉüá%ì&¾~ ½Û’ýÛÚH»ìGbìZ/Ö]÷–ÑW<ÁÙø8ÿˆB+n1²ôçbì¬ÅÒÏͲÖi70A9n §%d +#)äFÑ5+©TAæÁã +pÕWâvÀW èÖ‡n6©Bž²KçÒ}U´DêK©
jp>²Vþž‘ ¿í¸;LfÁ >¸6¢X)f–“~vÓø –j†ê‡Í~ž^Ww·Aó¬>Uw[Žª†
#óZ@Ì´gê“ä&€•=ƒ÷‘Èp<* +ß\v/æj0S¿o1$S Á4¾ª²ä/%YôñZ)ö/¶+u.²Ebpóצ¦ÌÍD°g[àÐE¥ šŠü€³€ÄjtÆwƒ±4y‹¶€Ÿ-Þ°Î+äßVц>¸jŸb§‡¨öžá›‰‚zÐaï@7æœß ¨ ]Yi hÇKtţà ÚåôEw¤æ7Ÿ, f o¯=Û– oN½iJ<n´mªrä&¢*æ™\=ªÖRåyT@Õi=Z¼ÐjçáŸp- FA~› +ËÏ£Ùlt‚gDÊ‚íXè)–‰äÎÄP#G%Š
I«êZK”xÉ©oo¡xΘ÷ÿÀš‘Ä?AUO1È¥BÂË +QËJž7[©!hóÉ‹ÝVs>9à¨q´È,ù¬ôTOØÅ{°¼’[$9k ²&èÌóºÚê§ ¬áÁ¶+éNŒ^N¿´óÉ2·PbùÄôÖ©˜X#¾KÈU&Š[× Î•ØíK`9Þ¬u[ãúà0>!Lô•›2 +¬×¿µŒ—a÷ãÍaÿÍ‹:Š€“ì–ìw5?®®.·0¹ M Úsžzq®iþ®L·Þ†T«â¯ød¿ýT„©àQ²óf±›¡SÂ7?lÁ4Bb¨N·
JÇ’”Š¨…»ZD€?øÙþòbËÚΊ²iZ¼ê£—¹PDx( ²bs¹RDSòNé°Ã@CŒÔ‡ƒ Zä¨ ö)ΩUô_Ç ´·“¿¡æÝDpüÜ;".t¥žÒ·ÁB§G£s!ÍtC +œíØ™þ ªø)mPØ *Õd/¨Äà¤ÂYÖ›5½Ó÷T“¤ˆ1ÛÇsºd°2ð'øóUÒÒIs•« \ +ÿ¬E +Tñ=ßW Zðé=¬gÀïð;ý‹Å}Í´ 2…<Œ¯’ôp©N;,© Ç•4&ÚGæ¹¼±j +JbÞ´ßcK;E²ê a<ñÊ™<5ð$›Ó4cA[ònfÅlÌŸ>‘URzz›äŽ4ø±û;“ZìYpGÿ½k)Ê'–´ä™zI¢û’l‘vÒH¶´zs —î+”‹?ܸ5Šã²Î%€<°m-; 4øÚ éµv?VänO1© DP'®WЀ‰é£çdÛ×jAúq8£žf°Fào÷þ¶€¬tÊ‚õìNäš…ŒaŠN|kJTäU dAÓ|úŽ:c¥g÷gc˜„LçDô6fŒû«
æ +È`ˆÊàœUŽp’ q’MQGaå_6g!ó‹s)¡x +Ê„ =Üîu·Þ)ÕÒ8Ç
“¢>˜óƒçà)¾?Ae/¥…J›4R.xls–+ý;OÉÛ…ŒÃØgl\náúsbl·‡¡ÑwD
ôýÀè&á‡FîÕ#¬Pš¯œ¢¤±v”æv&aþ¬’¡0 HHr^K@)%Â6‰“Z>þðÍ\(Ä[øعLZHáj/ËꄵÊu8¿3\O¨p¨ØɉÃMY•üa#¨°„Î{¤Lñ’Î!Ž‘EÚ£kp« Ðg fntÙPI¤à C‹òN2´Ûr G§¹5Ý àð!a‰ ¦4ÒM²m§ +:X,-!C áÆù#59iƒU *†¥¸ž<îåïBªp¡å_|A©âÈ ÛDà3†¼ˆÇia¼ù†Þ5äUOtÍ.v™ÀmŸ'AAžs¶Ô+ʵ”iâ²èF„¿ÂïÔéó:+ú;ž—ËH,Ë(`vƒðŠJæl¶Îö™³2h´à«ëMí{
0_x+¯?îЮ2›te§^°c=½ÀÃ{gÌ,õ&böƼ¯o©bf"†É—ŠŠ¦º HÖWúOá ¨˜V`
—½’DEhôo)'™£™”pƒ³B賫ŠÏÙäê>(VúÙ“›ôcö‹?gNûõ+Z(Wu¦yËχbÿeÐÖ™ù17ò8ÌõÂgIó¹*=‹~4ï-eôÔáW@¾f?±|ú(OWÇCs4£e@ `R> Æãë:ódšýj¬fužû2AõÂBúK NØéCA8FûŒŸ‚Ï*O¹îIÊÝñ‘ó*¯RcÅ@ J'àe»œ®uøÂŒæ–fÆyÒ™ež±.ÍÉ kP /^‹©Y›nÁiÜñ( CÔeÖd³½µùgø÷/9$ÅSàí»ÏÔZ +åÚæ@ ðGæ3—L§ÑkÆwPX,ŽïÿOïÐü"¨àa¸ËWèLˆQ\¿3ºÐ#³ëfÀ¡ØgÍ©Ð +E–Z¤ƒZ^£i©d$dm/ø%¬”ñ:«n ²øäl Xn&
€Ü’«`ÏåÝ Vî2~A24œ7›à®²à`¦åòÖ†dÞð\jÕª½jR¨Ÿ%áo³Hº¸}O'<³>³JÚæù²õÔQ1á@KþÄ"zùÿ «^‘Ïk–q~×½§yŸ`SgÛÃ)?*"0Ôýβ8Ÿº ¯Úærg“g¬ôŒ{{HmáLr, Ÿíö')öàV³ÉÇòÞ 9yØäVâôâQÞ¹ Ñâç¿CX:!@‹6j ä ÂaÔò[ÂGyYB£ÉoÃy’X¯Ôt/V´Ø·êsÓ‰`û”eóꔋÄwübHαͺårmíoÄq‚];à +ÚêŸ}NᇨH[þóþ¶ªÒ…ªp]pm„Ãák[—Õä¦f<\¶V
ÅQaˆÞú¢áæ\'ѳ(öåô¾üpS²ÒaÛ*v /[;qUé¸Ä#ðJ’wëDxïK—®PÀNã¤XEáÑþŠm‰º;»·œºÙuDŠ1ˆ¶»‰8)ÐâÿÿÂæd¶ÅH|˜ [ ¹=ž+WOºr1b
¨Õü§‹”#Ëû«=x^V¨i +blïŽSgÌN ²Šà²¯Q‰%¥ÀF#Pí/BÉOýR"†U½"z‡
nu^ªh¸ê*kŒæ¤ú}ÙĘ9 xªñ(×– ¶¤!—Ò¸Þ~Ó³4н‰f‘‡’ïáù>¤2àvKPfÍnêÒ¿‡Xz}×À“ €È½Ò[ز0·ÿ“à=Ï…N•ÁLl¶ eõÖß=y¼/*T 1 +¸E”ruÞî•·ŸÆTz¹ rvdƒ†Sœ2}Åš$¥KsðG3³mnªÆ{èb8Aå,? ®hvU +NV›8aɹ*Þ^X¤<ÆÁ0‘N_Y"Æ4hL.Vÿ†4 •¦ƒ¤–AÝ< ˜TyJævÅ‚",¼p—ú:Ý}¸sÊ/¶ÛÛÆ[Õ3v â@kK·© Hp²‹'}cz! }”‰8|¢jµ‹òZB÷ÔóÌ|;å¦,6p¸zS,Œ%îbôº :1Ôª
ƒ°(ÒÚ_îJå_öî–|ȾV£yA-~·:B£µË!‹ë¹>s”7oó«´K8Ã{ô
¨ê5µOÉ|é«|ªj‰jQU|¡ 'n±¦šº¢lgÃ1¿F£áÖ!% ôû§7 |“L ¢óO¥ÿ}ìMér N²ßÞ™ç×òý¡QLa±l¿ût˜”™ÏÅ×0Ã`êªéÉÁ3n—²«UðûzmZ·¹ÿ‚n lêA=tÚ¤ +“´Ü+ ´Š[¾å° @(¯MbuéŸàæX“zÔ ¯a ‰¤a ½& +Ò‡`UËì0•á)Ž»Ó Ö_ïµ,n=IVÙ¬‘±H$°-u— ÆäýMƱŸãÅ~º'ùñ%=”ÿþÀ½}MWßoêaÖ:M …Ò—Ð)ÈŸêÅSÛÓsB¦á ¶¤ã¿
2 ÔF„ùºKóÇK%£}¦hÁÁà±ñr Ä·,[ÑÐ~õ³åŒL:J[B]†à°?êIÍ™Y µDÂósåj!_<I\)46ýß1nMæ{±…yq¢&çFw@ÄZÖÖ Œ Âù p ^Mæ²9>2 SßXò–]F|彤 4·=¸útl +8=F:5ÝÀb_¹t†pÜÇ7ÙÈÊÈߌ^À;LG™{vOG'P¾þE ÷;pº2*¾¾+(¤YMŸ¨[ar š¿è€Löä‹XÔ¢·L@& ²! µ|CNì E¹cxz1å_ˆø8±®eÀ# X¡Û¢žÓ €·uåËÙæAݨ ʱ€eTëé ;QH¡ÔÂyÆ’HrYÜ+¡Œ[íªîÐìJ¿#ÚRÌe¶0“ºD@”—¡ât",2t`°c‰¡æÕè¾.ƪWþm@—6NøÌ]"³ñËÕx®lµ=戡w¿_ ¥ÖÓkkˆ™¡$?Ÿ´ØŸ :&*ÑT!J 9¿_ +tb +H®èŠD¸_¢ÌÃ×6ï `Jfg?T$W±¡ÔÇ(!FÒJí,ŠÌ#ùø·TZ$0“7˜ýþ9 ùTì‚ìØd½N²*UÉ.õÔÏOº-M' %/µT|yEó»YI”ðGÕ§ßÛ /1lCßeg(5“Iö ;9‚Tfa€â¼?M·ƒk5189$ %ü‘U_¨4ÎB7¾ ™Ä+AÁ>ç[¨Û:6O±ÊÜ¿48‰aÑË AÔ£’À# Ø|ÇŽVÓT¼éH‡ëPûÝõJÁ¦¢qòY$Œ§ùØ~Æì]®ä¿[iS{a27Mþ°!¬Õ1a®ü7ؤS_Ù åÞd ΊÊJ=Ýþ£ # þÆáDõ®~ÂÌ3
FǼ`[ôÕX@ív×ÒúðöØô®—?FE1T¼Ñ™|SÎ,þ’ízOpØ嘚ØÒÞAì¦g•ø©ŠW ýŽ rÖvª=U‚¦Àï+UR˜¬HOG@ÄZ²±är +‰Ä˜þÐuAtO»Ù‘HŠ³ ™"ñuQr0€ˆËö:çxôËÑ
[ÈC—æÛ°,^mIÔÒË zÝ–’•¶\H¬?®#•ÿ +—èÀ4äÝ·lç½XNnQÅ6¤n€<Eñå×ä¾³™ÝEc›©BÞ¦EÂ|Š4ç—;PÚm*vœÂ0§s £`–„AàA§ƒù퇧]‡r^[ G0ÝMLÍÉ”ôIô
G=b° ±QÓéÓ,OAø¦ÉR•høH™Ã“
+\-ÉPá?ya Ub‚ÔôÄùmgGsðáPÚ°+Á5³cÆÜWrÆ] + öÿ.OŸjÐÖå8z¤À¿SÑŽvŒÇ">–ÍZÚÑ)g. ¥ À…WšiɗѨUÚ¾HØ'«Òº÷
qÈ ¾PE-ó4TÐYó¡9FšLÛ1×Ú#n¦Á‹)j¡²í¨Ñ“;ŽÃÜ g‡Âº,i(]’þUË>Wfh-wR$‚è¶iB˜Æ1T+.¾IÅxE;&…Ò=‡½œÉMÌ„¢îLG^}ôt¹È[
6 ¨¹œÏîr³‘¨Ón'CüÄ3…Ï™”Ì.÷— +²Õ*cõOמú3´ÒXŸ;à +‰ìz¤¸‘òý.* £“™ÇÞé=†µÖªd [>¼¦ëMRâOL³NMŒÉv’ÄênñöŽ=Šm.÷²k³Í»áÜoñH¯3 ã;Iˆ^ÿ±ÊFtyÌ©Þ ï—éDðk€ +k§nûCÁHpB_ú#Q‹–Äô°õ &V;èšNb~qÌ Ž¹\ª.:#^u58ð4Ó;jÃgO€Þæ½û.[ÄjʳãÒ|»Ï€×Õj “픹E Ò“éÈ WÎ9æ4pj ‡Ë ÏÊ:$C rȉ;“ 8PSàŒ½H‘ç!ƒæ¼ÛwÑ–n
Íyâj±LÃXu4pË{ô:0ÿæ63vá«u +DÏ@!½¿]ÏÚ¡èôŒ¸6×DÒv9&>x—)9â ¤©æSÓÑdõI+5•·'mKfFeêûm¬ 2l ¸oÊ‹úqaÁÜÇ 1á +ñëÉ<Î3Ë—!9tQÚKuCÊ»ðQI¥onv~¸ *±bpeŸïÆ®lœò b3Sæ«ÐŠ¶yÑRp™7ß1‡š‹‰ÄÖF¶I¤³)œ!lR¢ãõèyº "»›Bgà¨X ½ 6A„TÈvO °TEeø;÷IÙ¶‡Ï˜ŽÃˇõ ‰üb þßp:r¡‘‚Y f:£ê£òۀǒað(7pŠì=.Ðw¨²¾ —XñÈnòINØ +¡lâÓèÐãâzTØ»T˜S(¥)’$±hLW7þè+ÓêÊhÍà/ì÷7 +ÔÌNÑìŒ µø±ØŽÂàSdMyÜŠS¦þt3ˆÉÌf ƒ €•©4§1µñCŒèi¥ +oa½éîq<ÜLUÆNCÌ G~õØ« M›Z÷õÖrccöÊùíIÛnà²ß‡¨›ýƒZ Ã=ã}ÜçñÇëŠÞï¹²ö‘úà™çœïtíçÝ$WÃfŸñ–’:»c²S ÕibÒ1'uWÅ%KjÞf7àú*þÓ_œÉJ3c[uQdz:ýÖÒ ‹:÷–8bü.Urâ<åµjÛ4DŒ<}Ò +Oxr×ÇU‰[ÁiDíÁÔ,¾–F0¦107Ûeà»ùÓ9[v<ìÀÇn
‰»-=9ÃytU À3«Ä‚ĽJˆŠ¤?îcÛÑ¡à«k +Œ¨}µú¯ùfabZçàl—Óe«ÒþßC´!¨‰†Ýx{J
Îy[¸ÂŽû™Ø}‰~Ðkv¿û ¦ß»ì¶-P1¹ü
\DxA±ÍDòµ-mùɾØÛw?ðæ»®æsq'COI
»§Çb¨à&¥óè*|«r0g‰I«*>Àè +Kõ¹5œr8ÊŸú¾5:€0D¦¼çèú3¯³»…¸Ð\Ù ìÑ,+NAæ»IvÅýÖ.¿LÔ‚eÎbr-î‚ôòÌH²ÍhÖ¤šnÛcö‹
÷¼š¹ÄÃSö³ÿVf£ôë´øJÇjÂ]/?:c"É
!ßqä+Ë·–e{¬N»YV ”ö%µ¿ÇÀ– /öø^šÌðmÕ“dWÔ÷ÀPý»ß ,Á•Ì¹IÁ[F¿½•üihî5ŽýÒÞæÿÊ öÿœ ä$ÕN¡$” •Æ7籃#½Z—L +XË;€«÷¦f¢…E]ìÊÚ']&.^Yý©fv+º9‘ú§BƒHp*úóláúˆÓ+‹á [›1 µô/ŽÒç"[Ü×b÷zÄ =(´ãœ7&ad âOz +w|Xeû¼£ÀqdÔáY’í|:ŒÔ)X;ý¼<¾Ñª¢8ª°qò¦;›Ký;(ŸnŠÕœòÌ´CáeOö{ÙóêAd¯ãbXãÔb±í½;·U‰o™8mãÅÃzSƒúݺ·óã“f\µÍÊ£8KÈ ÖkVøo_ ‹ ´¿aÉ) ïPÏ‹•i„mJÈ +ŸbÇ°àæö‚äÜFíú3Åæí±|ë)Y%™=QéÞ1
`Sm[-® +Üw „NÙ²´Ì±è†Ì‹ŒÛæÏ~Ÿ&Ãl¼8]g óa{eaRXrØŠ*úq«ñÛқ⼤gZVÑÄ=}9Ù[ÊõקG[ÈuROv&²ð}æd” k/$/Vcµ¨}P‹e™ozéÕŠ™<l.Û÷TÞN6›©A¦"n¹A ×<†ebý(‘]‡PÐÝ +á¹ÏõÇ áIÕßÜ(¼Æ› áÏ’ —º3†
‡Û¨T)Yí üWÜÅ‚ “¹ß% XSa£ÐkÀCïǯµåV“ ö‘°\úò$h–·dE·ËÕ}ÉËûˆYªµ£Kœƒß +Œr
8H³àEdF
g¬h}¼Ç¨t×E~ÚØÛÀW¹(ŽÄôÞϲmžä tpÀøÈ';Ù1|/cå²0ßHâ>Bãσ*WßsèLÅÔ"îѱQhlêm|ùûB‡45Ð3×»Ën“ôºOÌï +_ÜÊÍI‘s°ôЮØ\1žá2ÒTûueĔع÷—ªïòK€ÈFÒ=’iè~ûŒeHöag.ržn?gîyAâ?@[ÁÿðD&ô“3ÿ°¢ +Ž'h3«ýð˜ß ½¾á + ßå2vDÅÖ ýNJ2I …<UK0G@mwÌý`Tà¿“C»¿›] ’•]‹YÍØG vS½ 5SlL:Pr4 ~^¿
Ãíèù]ÿuËJ'siÔ‘[L±íä†è âå1£-Ú‹‡íK.ËŒÑ0-&óÚR×ÖPÜ +ðÖf‰©Të+€¼Ç
‚m´ɈMO $FvY"{<7V%·hÛoúƒ¬à;4¡·bäÂÉSî$ +~©ÁÂkb6ª6@¾õ±ø ‡´Ò8mw98UåÆa•M—šy?‹0k¢%؃¿ŒÁÖãÜÜ]æ»0pW©e +•À ëV‚üâ[P¼KöZ育zÔ¦1×å@û©:Ñ tºOÿ…»ÊB駀ZÀn- +«O%†éÚ}BR›eEÜtÅj‡U¯£w žAgs¡jÕXR‡ô™f[KŠèð£€è™ÃìÂtßÿÇt—r)tØÂTëY¸G¹ˆ¶uÇjÅÏðç;~WÂCåðQ.N4…f¬TÛ6ÉWèÂaÊ=Üø¤ØRû‹#2®´} (Ú¯ºžÖžwY°à ]Ån¸sß?–HXýÁ>œ;jŠaµMó^Ê}DM ÆçIvà»6Q§Š=^ˆ;Ž”³*Frérµ|ݾÇ&ûNŽÄAüä¡t ïÌBŒ‰HWGø xòXcˆ ZAÉWp/ãÒÄß~<lÉFâÏͽ™†½¶·Ís²í±þ!\³:Â\î|“¯«ýÂ<7)Ïp@,qýã¾XæTRd„jÔ±ænƦ VøÖèð…p—ß + ÄD²Ûó–çœ}ƒ¼]pP‰I²-ßµäù0aó:Ûuû£†KVIÜü¼#À(ÔQË«Xc¶hOâÊ`yÚS{À°yä#*~.lÒnfЖ Ž1 ]Î8ˆ t}ÉBk)E¼Ðþ¶¡¯ìÄï¨Â½"¬CŸ3ÃÍ» ‡vºØ ýsõƒÎ_Àˆ§ID±z‚†gé3ÛZö–7BØa &•¢ÁKÔè² + >6þ¼¦÷iÄà•ÄOÐ +Ý›³›ûóò°CéMgÇn¿“Ë9µ:Nõñcz°Š ›%;Æ>Ë@3Ð ½^DnÁ¾T/¼rÁ¿|IÅT)‹-íO•Åq@p2õ{ÿéèüENâô (°x,q“qÚ¹Gèš_“GÈðDð¬—Ö5›’”W xÌÇ +¢î¥ñ%lyõ_ª™¥„Kü¹ßãü²Hñä÷N¤ICõ¼Ÿ £r*°T@‰aÌòä +3éQ2–à[±µ.P&$’ì†ïP:ÈN*†\„Å b v:j 8Ê$â÷ß=de;ÀSW óæ©_ $úß»yÇ
êÜðt”)†£yÀÅuо%÷êÝ|Iñ¡¾g¿?#¯v¨ê—•Þqç>#Ò¦ —;úÛoe
ŽåÅÏR±e¥g ]\>f.* V +j
Ò~÷óó«Œìò°lˆ +» À%–U³SôQÕ $JÎo Àæ%Ê_ª°¯êìŸ!¢åþt+ëûåXyÖ×ÎR4 \ºÒsíßÓ>—ÄÄ ©ðg5<¡ZµSîo#a0^ö1ŒØ…§ì/Ÿ¹¦*–m¿VŒïјï zÿÏc3ÁgAèQ÷A¢{s‘ŠßU6«¡Ý’z^/õ¾B 8®Ûu-D&«(2ª¦L€ãÉ ôÙ»msœ:žÑ®uƒÈ¼…=õkÌ2tÜMQÁVx™ÀrŽ¨¢Ú ˜”„!–ßçIð]ñzÿq¸Ù ç#ƒ£Ž³ž~¨n60%Wï³Ù»¯^äÚ"þLh'<ïĹ‚蜂þȸᲠÙÆË¿Fž”@3^¹/\îôES»MåUáGÁ—ƒŽ9½´>Xž¡”®,›T2ÌºÔ T¾Ê8lØB ’¬WŽ8ˆÇ>?âq{Ë$xäy»£®†6È$ +˜ó€„s®aÚMÝVð½Ù¥ÅúHë-ì…‡íZMÊLÝ· seÑÅ9È9e4 7˜ì5ÑØ藔½‰ÃÄ™Ÿ ¹„=¾&‹ÀŒž¥þ`#fÙ&`¦Ø8€Ë•×zbïA`ˆ¯[|+× ‰À૤ §¨º:^¬5 +‘P +[ÔTÁég~ ÎUX}è- ø››³SlpÎßíR©ÂíìI£1À&
\xhÒEr)™m0´*$Øë0¾åÚ.1èÙÎ +À*T•ÅÄú&>'paFè‡N[¸hêHÌç?GY‰«Ë…“Ûî¶ßRQƒeEêÓ/bSl¨ÈƒF…óîYic²OfǦ–‡`ÏŒ~GÀ{-h +ⵇñuNLwŽ™ÚÄ‹ç68±5ØBIby8 +ÓÓù1»«ø„Wá F‰Î^ý4^æÕ@Ó×S€Dz!Ì —2ÁÒú´èEõ½•u*,Øpˆ÷¤}‚«-¶R +øÄõ¹°05˜^n?3ÒMeõý/„ s8ýõ8²{ﱄneSSåY€`Ï{÷ÃÍÁ´*ôë¥W<(€X÷›ª\¼ÂmZü;ß;Þ*ÌÈK+ôàä$õ¦†ô>Àb”°“Ÿd‚ÈÞÆ*‚~¡ T AÜ#§ÅÅ ®½ +ƒ )c×
$oõytz~”ÃÑKµâ‡UÛ&2;¬}pÀN}µ? ìåsàÝÚ¦_BéNRk«ãéÈL=ííå;àN¯”ø`€E‰ù} +çX5gj‰½³Ž™’{§~øZß êÌHµ ÙšeŠ‚Ä¥¼Ô#XøHæ` lžf‡)%v£ÝK›é¨MÍ• 8zÀéÕ´xþGgõ¸Dmæ£ezÉ,jÜDÍŽq² ÖP1¦”QžC @Þ59x¯XûOh#¾‚æÃÉ£•Ÿi£¥z#lгì 7hˆ{²<c+$ôÛìn†Óå+Wžs„ p¿¬ `€æ»S#£ý‹M ;ö[£`rµÉfè´;Éwðñ5ÌSS°\®™þÿR>é[ÎáàÆ ‡æø›¨déuÐ +‘É–-¬A]v„†þ¥=R½³a™¿zùN°è”–|ý<±©ê.ê¿ÿÝ[Ùé% ]£çH ™Ï"¶=ó&D¦]‚·%Zцfëˆê ˜‘å2ëšæJ†’^e?€6"í×Ậ±ëæYPÊ/NžyY :%;Ìâ´X?½u™ÍU0•„"ûi] ‰ßÞ2ÍÇéÇÆG +ÈÒ`9 öõìKKx@\ yù´6hZŠQÛ ]¯/»`4_ ¨!R°=2Q¤˜ Õ¤[›²1G‰dÝÊ&±4´OXáÕ'; «Émø0•áã{_‹)3J€¢§Ün¥Ä{µ–¼T·¯ƒ‘omâÇÊ öx°EäßÇ—âµÊ¶€¥ˆ81v‚y'<9÷ÚàšYÄúdØu¶ÁZ¿^?o~}ÃÒ¥†Î|«)í *¥Ïþ—qÅnmºt‡©Ao`Ç05 œ=w|d|Ä aÈ#öèÚDqÈ û$Þ ©—Û³RÐZJäÎ-*²{ótÉj +Ç‹{µxjFÍ0ÙI´uÕóiÉÂqž¦œ…ò t1²SûHò&-üêÊL«´JÁ5•*$é’¡ËSvçãèö²Ì”ÓÇÉÚ3¾–V¥3á ™µà{ÌE$ + p`é„XðËf‚•H +©jšØ
ňgqŽ‚‰|ïÔ"çäGzY ”¡íV›Rz:f/©{Éb˜j,Vú„l^ßÞ6?„Ÿ_¹†B°²1LÐZÉ$‹ʩÂps«¡‹ç©ô†Cô6¾~.¢m7ûr©6Ô€{¥éªÕnëdÂþa¨Ê¢ü“ÛÌN”úš=ÌIâèÌàÐ+{L'd¾bî °½mqç(|N ÃÑ™,j +HÔ€y©V„×;ø*Ñ[‘ÕÕI˜Å‰÷ØZSOíENx¬&µ"‰.Oø'¦ˆJ>*¸¿P’xÖ¨xBÃ6u<zé +áxIá²n +Q¬øEÏv—û§ƒJ±ôjœµgÈ.( U2¦£r·¹ +ÃÇåµî¨¬?
"ðŽ3ó¼T‡ó"†µm +ÚÚYð[wÄ`1œ”F^¶zkõ߸{r¬ÀqíQtÐY©Óûqª ½\Øé b5{‰
ËÒ½ôaar±›ò±æ…C +)a„¤¾C]Ë&Ã_Ÿù!gr +úª½´Q¤ZÇChæ#tyÈ×Êm{·F`]läYш¤w>øË;VœL¯um÷ ”z!z'Þ´è0ƒ‰jæÞ ý j8w…ßîµ{^ïHh?Q”%ñÀ> v3جå™å)‚¶õà˜üÆñÏNÇ`%Žzzg˜5θt?åHûmØ ÅÒ*ñ_Cõ 7°æŠÖKÆÞìãeÃY=UÁû°ãÙ¶ù©D¼XîÚÒÑŸsz³ðMÖ”‡xÄbÊ’ä_Þ5](é#-ª{uoƒAœfšÆÚ*®f2—º Pf€22¨ðL9yppFÓ<ºdÒ=÷…Üü$~a)¨ÆD¯óð‘b¾‰¯‡'þî¡{ñý2`ûBÒŒóá03Š‹0-Ë +Ûmëóg:®Ý+¶O»ùˆ>IÚc²úqbÖÃù1¯JR¼yÉãÝ “wng²½i@#gzd⪺ªô‹i%|
<Øg ^w¯Ö1óª™ë
ô£íâL ~ÜímÁik³žÅ7nvLbP†BBo8ȾÂòÞØh-æ"ßá5\ìñrìC³Äé'¤›º¹c±¥ñÖô¡ôJñ"‹éD£h5t¾’0Y +ÊqkÛP´îÕ©-T{x”ý¥'¨y ož8“›eìfbþ|é÷½Œ¿) Þïý%טê²å‘½B2¨íÜsþJìü¤„ü]ñ‹–q„t¥ûQ–qQÑ8û5x[ê„ŽkR̦&áN± . ],X€%•ì}0°H é·Ù_V ä¢y ,8¥x¶s¿dįì´]nzsàJÊí¸Oema² +½íá< ¹º·ŸcþÝÄù‘—Â䊹¡€¯‰›[ïâãȳä& !hãc(KÂ1ž£¥è)—^‘»yo%"†ãR¦Ë¶Òý¢òZÜή{ëµ5n&ò?š? ±Sb"×·üA|„©æø8ÙˆÓÆk[ù‘¿È«`¦( Ž˸ ½ÑbËm +±f¶B´ž§[ÙHZAR´ Æ ç Æ_bÚ\ÕeI`Iî²Øï*9A¶óXZ]£ + –þ%û Ò€A%Èmrþyî螤bŒ EV˜Ñ(àuÉ}û<žØ +mmA!¶j‰dû4wý”®;úa±ôß¤Ê »Èo]¤¥€Æ»~ä{ŒÅM¤1Þ¯0£â?"&m£8Ïc×êÁv¶&PEt;ô-•âw„`bhºm÷ëd%ss 19¼¶†y·Æ$õëÎ;-õ˜4ùó H&¥Ã&H6ÿá•Ácz;Ûñ§/×±MNÙ×Z¡<d£ Î {¥†‹p¸}{çþ>¼ ;‘VGj‚pRzÙÏŠ~ Œ™p-Dо
8¦ þ.[f¥XªœËä Ę
˜¾é¼"Ï&Äu d<6 x:›¾¥?÷6]O¡$î¾@hºøø N9Ê :æ¡ßd´tË©Õµ€l|Z"G˶,õÊ¢ÖÒr u5Qlœ;u¥—ðã*Ói‰€å"Ý%Ž¦ÁªÏé© +:Ôö>çiVpQã>ÂHŸkù‹ïï g^zÏc80|fÓ S¹až \¾ çAÆ¢ÐÓdFé³>šU˜"zÄ*^SéVå™$ánàÛþI!‹YåC9¢l;( RYžŸ!Ûe¦ö£x—6åSøá‚Ãœ†A| O#¡å;íŠÒ%¾§ÿ•“½šÏ…,Óö4¦µèêÆî§I þøÛ·ñÖÝ©ðöx-y$l~^‹ÞÖ'õ¥ŒDÖ"úÈ$¥‚ç·ÆDKp™3&Iª ºS'BPÇ°‹ØR¯}SE©@€cM}4WÏGø7›Ò™Wt]Aì€:¬*‚šü5Ë©dËƯ!B™Îÿ”ðlórÈ‹&å1èp¸Ì/—s`W]þ|éøÌ2êkî§Ã1øG0èàŠ˜ß_-9༕O¾Î^œ ÊlžÓ,°è;;áî¿0š<k<\0‡€‘:®"Ê€ôr1öÌ¥š Q‡Ü<`*Ómâ¢8)[‚B}—¿Y5>"¥¥°pÉù§CT›{‘‹½…Ó%T×ÚKò´EH4”æÏ‘÷‡„À6«nÔí;$‰JÑÌä3$aB±¦æRòÍ…€!ˆ?KQ¾î„,„UéfN +_]UO¯Ü_0H)…ïAŠ¯‰Ûƒ„ÝÂ’rÚïÉÖ€íÁó§Šoœ#‰—¥4³5vf([SŠƒÚ¿¯/L®‘”dy öfñ-wŠ—„©¬óB¬ÑœÌ ÓÈ“Î ˆ±0‰QÅa'hC 䶆²DˆÝj×»ÐÐÎ:7[©ü˜¡ÜEÏè8Šôý‰ƒÄ†¨_Õ²æìãp‹L›NW¤â¾ºC._EŸbP¥µÁbJcž%åþ¢L~¯_ÏÔÔö•ÌRâ&tå& +øäiãÄw¡â¤a}U̦vΣ_¢…KÅ{´ïu2fv1¸Ìùø7ñ.ÑkÌ¡UðÙ*m}‰G™€XúZJáZõÝ}Ÿf«Š´src;(åÓ=XAÜ¢Àq’Ý™±Š!øfÜ-ZgÓâV[㯼?ÂÆ09†eGÔ*8¯6Ç{J.àL£ÝYTõÄz×ô‹~4ôàyÌJìf ôž³S“<J2~FÏãrM¾¬P¤ÉDÑÁÉÕÉ)ÏïÅâÁ•3{ÒƒmqŸFÌPEé)ˆðÕlÅÛZI½?£…Nvt芑*HuƒdÌßûä¿ÉžïL“’óð\ˆÁcm¯,Ò¢Ò |eÖgÆãXOk'ç¸Jq~² u‹ðp(²Q„ÞHùBíÝ0kqïâ=Ót_³Åx¸€ üõ •‘{ùR–l‚óä墤
öVEh‡…Žm¢ëµêõwÞ{Â"€JÍ0zºÒ€ÒV„
™A~4—F{ʽæ«yǘc|¼£R|m«´àÀvr]„ZÐç°oãÉŒ¬J¯_ñ:
æÂBó$-Û´òóP2˜òŒé7êSí#|i7‰|GL ]ÑTë[1mêšå|gÁ½¬é®=æ‹4†úS¿jé5ŸGÍ{î{ê—%â$–)Ëo®žÇ^Š ægæÄÁ¾ÉïÂ[uëá`›î ùE6G*Ó)¬›ñÁµîk|¿v{ðÿYxÍ#WnÊáùˆEÎòq¦ìŒ‰Ìç¿KÚJa¬V%½#Bcð~Ú6oKÃN™ÞÔ›\üð"LЯÀ àÂdPÖ ÕføX=À(Þ§ ¼šÚU§lû‡q@BØÚMkpO¬™~G.(J ¶@Yq0Ak5ïÕÕŸ=ëÿ‹KáW—&‚5E„²-Ý<SíÊôïüG•«°Km90–ËTgA"@È +Õ\ŒS¹ +àPo +7hŠ4®IÛYó‹KâC‘» +¥µR×ÛÆ1âÐ\ÄLƌ™%»…lBaHO§©“Šª¨X„ùš¯„× +ü ›U¸™ã‹PïÔËiƒÁ [Sn°Å†¡÷ï½´X﮽®Îh•Q¼-¥‹Wog“ÑoŒO¨Š "îZãLé«) ¹!©ÌÀÎ@iA‰Ì¦Ã`[±ŠÖ@Š¨¹uŽ`4‚è ¥Óçå%¹´lÐ,^ «#[ÏÖæQ±g„½GÄÝ•D©ùÀ ÷š¢ö'Lš&.˜lQÛÄ + mf)CfÒ)ÝÁ‘<0Âo:nYã‹9ü,V ÕVbÁ¶=„ ý¼¥.âEM“62AäÎ +4fåÞ·=m¶CÁƒœ· ·f`lÛ7â3þ©h_%+#Cs1Ô’‡Öxv<ZíæЋŒdVùÎa½C´ r[¼Qe¸°LÀ’‡k9Àä{©š(ŽÁ{ƒ +Ïo) q
ãfA÷)üPš1²fY fMvV„ ÉOàl›Pqà„M ÛF}Ç°yN¹¢S{L"Ç›j óÖI¿«’|OBż"˜ +*¹ 5¨³Ä¥®£€`Y5£Nûƒ_-Ð vÏFSb‡¼nsrJlF4è1Ð>s(† µ +Õ±©‚ùbÁWdÓ;slsªô•~tš%úÃå$Õ"ú†ŸÞòz…TÉ™|¬×Ùk±Ãr5ÔT5ÛùK¿qäØ]¹ ¯&ÎþE‘IKý%å1ůõß”l¼m:MÒ¨!JNù„‘ð +øÔZ®R7ÑêBëнA +YUÇqÇjÓÕþw ÑñùÖ£* ü¸íÔ+Vö:¨Ù9¡xMÞV àrð` ›ëùû¶C òïñëHõØUGº Vý”HEŽÈe&ç›D|¨ñƒHä@2zò¨zZ‡GÛ~«€Ë”ãÞ9%fBJ<"õßmwsŽ¾ x–ôEOeÓ´jE…ð>Ù +ìvYnæ)š£Ehegð\úrŸhçãèôË"‰U!Qu‘Úšvø™5Coqôûcï¢ÜE óݳ +§§«÷ĵ{·¼‚VŒN U;¥tš {yH,8LPʶ†ç¬\ S%QeÖH6„–¦¯ë+ˆ™€%!2*yLÒ sù ͼ¤ÁPu¨þ]ÃÇB; )¯?Ý?ü±bÄ~A¾Î0#6m—„0ž‹ –‡³åðÔ²pÒŽQúó(3íמ`©{ÌWn³ºæ"È5vÄ^ž¤“ÅÔ;“¨‹0çM=ÒÕ† ƒ1¤YNrî·gn(Ž6Ÿµ$ëA?…ýOØïWùµ˜Šb•òdýSB™Î–dHÅ#ë¨\P<_8‘†£ èˆäë&•IàyÓ•ó]®}þ¦·UjPhqМΠ9ÃøG ñ€,¡Vzž!@ H[Mó¯h„ωb…c ªtÁ8¥"ýp ;'7Õˆ£½8µOÄæ‘!Ntà +OT‰(ô³KƒŽ¥\¯4ZÛÕÂá9-ò¬×Gç(ß²;6ÅÖ˜5£ó!J1èöÀ6½¿#@âþRS1Z; C66¾HÓãØ"B‰Œ.Ø–gg1ò©÷NÍÀöŽ};üa¢sü¥P¯RP{λ´¸j{šL±×ÚåÁÓM‡¼Àk
•UŸX†
Ñͦù€Lù·!êó=†ìÛ5ú½.%=æñIGú@ø]P?[ á¡~"iÈ1Ïê7Svg ä8·beS±P\‰ œ‹?‹íNU9.Óäã¹Þ%âÕ>¬D™$Bh)Ž]=²ÝTÉÝyçoÍ?˜üñsBoÙ{téW÷ Ó FC9Ãë3!–=jg‡ÿ‘6“*–)çÖ´Žnñ MðÜk}†ið¡ûø!4š¾Nr\íg.lç¿à9÷¨A) w¡ö1—Ê&™ˆ`v«6c¼wUØìÉËH²”Nø:\‹ý‹®m“ž=n$íX¿<PYï˜ý ['€†=]íßà ¹ [‹ëèd© +Vø¹úò¹iU„JJºx^ŽªêJ=KeúÔêg{ì@¥:øÎH—ÍõX%«f‘…"‘âAB“2 [pŸ£ê¹>£ØÔ¢´?Íê/y²¿°VÇçÕ™ I‚"Îu–aç1çŽ\¦†k²’n ƒ³ ùO¡þqÏ1\jʦtÜF’†ÀO~oº!æ‘ Jt-¼I“‰/y¸I)¿¯¢F¾øi— qð+JzŽùA[Š¢jLU¹©?äÕ/Ýñ÷½ëÙÛÔLX¸OÁ˜Ÿ½ØáY>íÞjì÷ +Žo~U5N"h(*nÁ7$Öú„= Ý¢g§Œj4 ¾¦KÁ¹:Tï¿uJv_Ã|/”Ï`KŸ
ü(ŽˆO¤j;mEåö
sj +›ôÙ»eÓËNs`t N/7€z/’a6ºp{ka
hÐ(Àó~_=Е°¥ôÚ3½‡/käI5}Â×…Âu»tS.m6ŠÕ +æ
Þ¨'óX*J °üIÔü‹Í@#›ýO¡‡d£x@,'&éSBHzTM$0˜\þ(íœ -XdbFA©ï‹ãíë»ÊT)ȉ=÷D+¯Š[®àCˆ ÿð +³ýBפ î×xDa¢Nu]Pâi§2Kô¸®Nm5¶Cþ&ø·P¦ö é<?RiRíJ·°¬ZýWÐûâ)Èÿ`Áv[îס}™;d
d/ÞF èô‹RN_Ñô8úïçA>(!` +l^xÐõ^RƒiBÌ +ú^(×f´¥m4d 9”glofÝŠ¤¹ñShÈ6fÔ趻60Kq´éê®jUVBógË ø Ô8OÜ廹0@`Rï´‡ñ®U²j;c¹óüu¯xRœ¤ÒÛñM‡æ®rjr¾B ³%%.r¦@‹ƒO5‘I¸å–#'r±õ„:€gåp"³¡-<êþ"Ší¢Ô“’ª+˜å¢ÓåtoÆ5e>Ô›5ó¸ ™žòáV,uLÌœ±É±ºö‚D™²œêäò¦WðËÁ> 4JZ»—S¡†ÖâÆÝqùúú7–ð;ýøKnŽAÛ±ÏbÑD‘n‰Çó D¹‘SlKµ6䔩fÂ_뙉qÛÆÛóNCõ !$qñt± +ÂíóîEž¡ôç§Ì]à Ü%¿P›N /;Ü‚ŒP¹p)’u÷ #é ü6 »! è+…µ <ú ÛǺ Óž…×Þ6î¹F`Œj%Ü+»ÏBµ&1
Çk¤ä&Ü2ž.7}?˜Õ q͇LÜÁ{ßÌwV¹ð ÖÀ£KÁ÷ ªK #=ðu +{îUí @â|k¾ËrñÓŽ°eÔwyTörö7.²°Ø‚™üaŒÀh/ZsŠ—uÆíúrýø¶‘÷aý2…?júÈSBp„}6Ro«õúϨ¥I«êu‚,Ó±iAõ̾ð_ÒñÉ8©/»v°ö–°'e]AG¦ü +fŠ°»üL^ž$Ϧ†É2¸ŠÇ:®–²|ž è TIH¨§¾(Ðk}Kiä¹ïzgæ˜í™äc-SW/nE¿ñ²Áƶ;'ŒUm‹ˆŠ€‹ ÿ*¾hê#éGyªv‚ÔÜAŠâD†ú´Ðö¯0aW¬d½«šJØõ'ü'*“ãjÍ‘7לôü ªCÚÔÂâž#Ì&Œ;5¹gÝ$?ºåk®!¿ÈšðôpŠŒ7ë¤3»”ÜÞâVêâ¿+!ñÅ&ëòï²åÇ:Ä£â73ƒªd[”„»¯ª y ‘{È„Gr 7ºõþm)¸†óÉ2FÏ‹£dëFýN¾¾(»É;j +²ª¿r€¾_ áÒ!¬ë8½Ž‡yA$¡#Ñ·qB4)y¡¿`é¯SÝ¥<)oôÆò è)&ft xâž9zá—„‰™M:?àÉcŒ,m˜i,µ:oWÙȈÂ
2q×³Ò +£Èƒ© +øÒè™Ñ%‘‘ülówfsi ÍŒsK›Ðv×Uu S³“>ì§ÛMƒ_EÜŠ Ž²TÙ%ë/ä`Zk\;6&¹êí棢cÖó»ÏF©«ÊÓ|R¯#Æêˆô~~²£9kê"˜@÷ØáÖ‹ +ÉZU6}H-$c¥Á”;&¦¨;°±àÓeƒÂäܺ8³}m„JÀlÀ™^µ½ ˜Wï!ãÍ€)ý`)sZèPûáT…4z$mO€ X™Èþ¢Š "U‚¸¼VÝx¯IŒÏ‘ +ˆÇ ä¤[+-0È +Õß á‘Ê7qmJÀ 4^áy6¦ÖîØu$¡0Èc ™ÿôéMÚëÎ=ãÓti.¥ûÛv¨)¦V–e´çèË[ð€%Uë +‹¿’tß$íGiø²€ó +¸. L—ÖqÓ}zÙüŽïâQÚ±2ª=Qßàj8µ;Ò˜úÛJG5 ßlÚžÆ^Ü(Æ`Á27/ä{³IÅAìÊ
zïjÛšèRÿ V…†B(©ãƒž)%' i6
ìÖòÍPk<À8Á´HÀ¼ hM–†¿$?ûÊ”¢’o5)‘‰€™’j$Ý}8m@;è7Öhã°`»ù +ú™úƒ;÷€f,µôÏaXa$,¯pÿŽ-öŒÒKP\`G_üw,'ļe× +?§Ã‹‡V†ê3Ž.¼.¹6øÑiÆôPð + ÄŸéÊKç͸<éî‘EÝ ÄOŸÜå\ö=ÓïË~¼Õ„=ˆv°§`BZ +¦†™IÒ¬ÅÕænÀõ‹ZÆ9Þõb ’ãegUøOÓ¥ Áz¥G<ãë +Fó5á ærª«5íÔbeC“õÍìksí1X´¯ª;yó\AŒ@pH }Zɤ4÷ôOùULù!°]¡ÿ^bƒô°µo•2Wàs™vAÞµ¸ˆß„rp±Ìga Í×9Ë9¹¼› 8,à˜mñr€¶"ü?Ó¨j
¯ßûOt&0^ ´üÚŸ«:¬™V±#]íC_ænKY†=[wÍQ8vm6áí¡“[3Q¾‘˜…¬*Ñîƒr²öwÊ I*s³ïd‚Ê¿¦%/+à+lšäú–M@CÞGÝ]"}Çœ½H‰HŽRŸ•Œ·6;)†\iüF{^rá¼ÝWÿË9+\qPbmB\Ëå D›ž:Ü›ÈЛc+¼(!œT“_ [Ž!ì-¢‹p³JþÄc”P¾ F¡é-Îã,_®y'—†äõ@g¯¸'¿"Äɤ½ ,h2qv3 +jSÝ¡'«&SW1´Áä|\'Íô˼—}ãè;NB5N +¢#è~ ÔêužÂ›* + õL|QàŸ3#«G½Ø§ñ»?±/°û”,\’g¸ÜPàýÉÅ\O> ’—öi ¦6_±E†HðœCÂt¹QcéÚOÍ=úÊœZÉFœî-î‡À»A +5Š +F´ÊÙ·®Œ
q×ðè²!ÆÍ÷®òðögòŽrr Ž[™,Ο6M ûMbw$\’0RlwhµyHLfföOýœç!‘† òŒ ú–5ž½‚è$æ‚fmëéœÇ‡Òò +$¿ÿxr«ùïþU C†Ýôähy7¾oƒÊcp÷…½¿fÌçh`Ö ¨8ª´ŠÞ‹-Ï °8Þ¹B7hiáWl®é>=^gDž6nI¿“Y„³Ã9#‘®â :ñÝÛ!« += K|¸ §’ØÚ.¿.o±#?·Dh[uA×B¾£-üä Ðÿš’¿£Öûæ2f:N ¿S䃷= « Ù¢¹òwv<uG³½ad¨CöžÔêÕÜÞ‰»®ãÅfØ> ráÿe #šŽ£cÕ9ÌQÈë9nÛºvð~#Ç.\j4ê \0 l¿kmc.æÛ `k‹D3ŠÏ~Y"G&ö†¶ +ƒsªÊjøî
‡¶Äýú“¡V3*“·þPb +r×@În쉾—\»X€æïv(‰ŠÈGûÂërµÿªµ—€Í‰4—ÉAØŽ] +Í='æ U7Êjø¶”ICk3bÍ]gØ›÷ +ÂCM JÕØ÷Šw϶œ½Ð©ŸÈ3å¬ · +Îr
l¿xÁwÉøa±›Hô7•l *æ/±ívj#‡ê„lËÕ§2Oý>IÏZ³†Œ-˜'´z2 §ŒQÙ„‡•»–@ærEBÊç׀Ϧï¸Xå¿ÙïdûTÑ×j-@ëv +wóÓýú¿<ûU“ŽÑ¶ åð]±1*H%b-ö›dðå@Ò<#.Å I!bål¡Iº…ê‚gÄ =Lãó…q\Ç]äMÀiL£t 09ºÝ>$o±ð…oÝŠ +½ò#öh ãÌ|ÔïO6z5…Е×n}Õt½+¦/L¼û:z,±{Bêi +L‘þå&òM°À¾ál쇔³l¦þ›ì@å}VVw;`eoÌ£Lj¹H° æ
QÆú V;+æ Ÿè¿‹Ã]ã2å<›4Æ£±•ºk<éYU@ÅÝÅ(á‘»Îqio_#>u!Š¨í‡9°$UFC ‚ ‡r–;6ÊfýmPÀÿWú°Wv™‘Vyáä¼ÖVæØÇœUU «êÏîŸ/Àô ;àó{N8Ÿ«fëŸ)dŠ´èEù”±.´C6ÿÓÊ™SµúqàA¬K¹ åuäåœxkÇ8 d<—„¬nŸIôZ]«¬ÃQÍ ²`4óNáµ5%;Eæ˜ú’•–þ§ í¬ƒ!q³WW ‘å° :ŒËNX‚mŽ„0q4ºÆ~a‚‚j 4>*JQÇ ¬;šq®{ÏÙä`Ý ì ˆÚh±L¨¾Á÷lét‚É<yY–‰—q/2°,?½Ä|¡&4…hÅuË + +@K û&ôV^)Úl‰Þ Úê¬iZ „þP …‡¼5pô§:Ð-íc¿z®˜Ú(Ê™Å3Ø9C.Vd€_éÇ°ÎËyuoY
ã‘WŠÿâ™ò,hŽM1VŽp_ +“ûdSÇk=ô‡@Úàd=N{¦QbøäY`á¦2†XTJëTwõÑ‚ûO6—ãÁ((j¨¶ìm0Ÿ3 ?'E¤ú@ QW¤> ë7O2ÊCV6&—‚SëM4Å›¿<3±³Î:¼óxs+»[‹ñëã8xkžwAË{=Ùå‡7cԇ㱠ô ™)±“ì\½\<™Øhæˆ&¤¾Ûd!à&ñ§»g š ¤ƒTm)YǾÞ]väÕdóCšÍË ^$ +ÿG“g`ßn¨ù{=^M +Q²#‘j|‡»ŒF + ]v¼íªÏ ñ#L +àýÙãÛQ€¼åðlz¾-nä(ò4ÇŽo”™ ýHªf³´A +ù³ü•ZhÁ0\G̨D‡-¶r~3È¢w~îGm;06”š"
V' éýæZpߟEi C–ƒè¹€PôõÅ¿ÇÓît +îv³]é:Ñ×¥SEwîÏý43èžåݵ¡aõ ;™æVé>Ó•¤d!›_A”®g5ƒ {@Ovï uð.,6¥ûÝ–ç;‚=ƒwB¾g×) +´#·ß÷9Ï —.·mÞïSÑF1\¤# +Ù—®nür€b*Yú@‡Xä”°IiÇèMªÙF—›åž-ꌇL¼pЂÉò¸¿øWÇݦ¡˜ï™T¦B|¸Z®¨\æûá¹wÊùˆ +ùäE¿GþX¿0"‡¨ø
©ØÎ6-><ÑÛÒûÁãÆàCdõFÂð€-vû󛃢´0›Ëǃ_ÔÛ9R#¡jÙw°"ö:q]s>§rƒï»'%Ÿd/Äâ
7E‡†™æKÙ',B¾Æx{nL;v’FÄý•ú‘*AÔO‹G}ûAž"ÌOLÒD¾ö2
TCú#«û︀Ö2Šøy]ï,‡œÕ
f!Ã6 )†DN¢ë U³|G\€iŠØNˆÄ`¸I0œ|Ÿ±µñŠS9éõÙ}ùoÂMW¬—8{ðÃjs¨¸Ã© }ºdu°g¨¹E¥Ì¹¥PqΘôEb«×>‘úàV÷máók‹ÚBög BíÄV +JÜ&¢:e¢zÄ&
2cÂÜ2½HR0ЂÆáèšéq²¹6]O _ôˆÄYÀï°ËÂD‰ò’hž‰ØTp ÀÆÂÿxÊA%V Ã]}Y"aögÜ öùõ +–!Bm(o/Sá&»Õ7ã0îÙÔvÂi*ÍqÌàj÷Oùƒ¢Ä*þÚ +¼˜iàÕ½‰òƒ°Fש¹Ì*¸lÄôq¤6Bn5ðjÏtç[… 3£è ßÜw>Ô g,ÏxW›˜œ‘¤œ 6®ú^öŸ =·’•+i†_ᩉ޵ ÔâŽ|¼’ŒÙÁ9Ñ"ȹ:ÐÙÈ æਠ+ Èç ºx,çjôßwWSõ6‰+ÿ¿î™†í‰‹(ó'N|â…ÑùÏüz>á'÷I“WSÄuÿÀXdwHíöÿhÞPó,aÁÞñÞ +´e¯²tf‰8Pwk±ð‹0.É ~¬‡¹ÀÞ5B ‹pØ w ç. +M±$´î[‹Æ&gÇ@gQ傺AÊ@Èd|«!>‰äk à\‘Ë¢†0O¿ãc ‚ ‘Ž(Éo\oˆç\ô.ÑËÊ"ŸLýÜ”)ëæ$œ[¢É>A£¾·58£6– ¹¿®@:‹Lt£·rk»þvÞTËCÃNÄ«ì ®\ö ™ó…åðÏä¾Áý½ëµûÁµO±›B.Æ &r»öòÐy‡Ü…L½ ‚ ë5 «à~jðæ)ÕиµÆ—Õ/
M/ðšs4% †¼¿î;OUñ‡‹™‚‹XÒ§]5zTUbžFÌ'"kâú$Eú" B…û¬ªCój›A<ý¯×6N«í v×ñÅ ˆiHÛ‡$ä>á0Â'?»ž¼!SµfåKF¢œùCÃؘ…|=O+‹ÆºýnîJè¹Ez{9]Ê[bö\뜕òž&õ nÈú[… Ë©0䡆R^7Y‡Nü8®a®œ€ONaW¸ +,ðÿwC{îæ|y¶Ž€Íid²K,{ô¾`lüáÒõ”'†Ð#ÓýnzM,Š£bJ¶Ì +š5–0Ñ~Ý_+ÚðÊIl#†0òWà2ζžËìãÀÑ;¡A°Ù$ßÿãÍÀlƒom¦Êy÷A™Ì®áþÿYk2Hßr`å•ÐÏ@LhÄcs)äÊü*,‡rËv;V€>—¶ŸèÃS`Í +ž‹“Ôlçgëtwwžåwomqã<çz¥<F—sBNÞæË ûûá6óÙ©*n¶îÈ(ÙÿF¸L$d()–çF?¯ºwpƒòoD1¿zx²¹qD›9÷HÓ¢œUn¯q~ej¯hÊ8k¿vö2¤Ùʃ&–zÆ÷f"¯°'8’…kÛ[»s_j¨/UÅfD³•p÷ |î•t|êòr[¼ìŽÍ64KâÄÃQ:E¦@ƒÇ=% Î0·«Vs$“Urÿ›çPÇI‚ð6ão×uÉ +ɺœÈ3$à"<+ l§Õž´¿µÐš[¸EE‡<Øž5JV˜Dj<Çèè¯v|“±e2ðÃ#áG”I99‡$¥›»Ç¤žJ?¯ÖÅ[´+žˆßPZ=…_¡§ºÿ&Ôž£JOìEBâJ4Lórø˜Ù‚ •‰óº«IfݢɄâË?£éí–Æÿ GÌB5£PóùjÛ¨óéPÙÃ0¾ñíkÍØÄA†‚yÌvsC,V—2j3ë$%×IC¿ˆß24î§ì/„ókÁÇŽJÛ+>"*éã ÿ„•ÿÆîàÏ\ö§âNÛ>•]m ẍŸ˜kš=ÝCgé…„‰ j; "½[;]Û‰Ú±ŸU±Çn‹œÂIf÷é¤õ_Ù|‚—Û[êË~=LuǨ „kŽ:¾ ™ÖÊé {ÌYÙl]W£"Ê>èš6Tx w±Êh +ðvà‚øUF‚˜ÂqÁ_ + żaÓÿP Èö
É+(<Åå-u†›\‹Ú—x0pÄC·4%H8/ö• WÙ1÷ƒd®Wý +1¶ž|ˆnü9s?›Œ³¬€ˆœ›ŒG 7M)¥7“ˆ—Ø«“›ÕqyÆ‘/È e¬=q³ð™Ú‡†ÔGïE©Ø +ØSûpÓ|n5ç^N_{ÍS¡6¹až¦ð-S%üÂ2ï±nCÒ^¶/?ƒÞ +&/ åJGby§Öt4Ê ÇÓ*…ád-Ò¡³è 7oîî1@F×l½ýÎ:‹µ¾,Öh¥·^î f-Prò©Üe6#À:6óâr¢õµt êsŒDÝ.±Ç\18lhŒ|…A(º¡lõ2œ›è + Ô<A@ïÕÁxÞ 4¢˜ø²×Çê VѹL»œLgD—@°SÃË¥ZÓ¹»xÀ^]H” p ‹`ÿ<eSGê6 +b‚}ŸMMQ=€dfö5ÑWë"‚våê -»ÄHK ïÿ}N <G»Œý²'°¶\f‡8t6T‰Ÿ?3==u dEæÆÇÿ7ßíåP$*èz ‚ÒÄ®\YŽWa¤7«XiBcã“ïišwÐí„÷ŽõB%uˆÎh÷¸ÜÛdÝ«LôŽ¾ÁÍÛ‡¾5Ty‹+=Í:8ærb3Ùȹ}ÆðŸ$Àï0«$s,ÄÂØX‹¨Ûl1B"”áÇI¨Sæ¤ÃŠ}õ!¦å(žéX]Ê +Äs1ˆ»c§ü®V_[=MÜ02 WKÇ9üÕ/½íÍõò˜jXDéj [¥óê˜â”?=œEâà <ì––Eܲ (¯ª:©ä.†GZ¡%% •M3•¬Çr`ß5¡àÀ9 ‹ ϧ¶8ÈR4nqõšK°l‹áðn3±ð¤:Eûöæ´ây¯‘ÖdÛŠÝüª5/ ô·jÊõúh‡6x’<{ú¸,–¢N5›—>Ýb^ÉývL £<íÑJÈß%5[©¢[*Ù>OXÞèyùâ û’„P2ʲµx—0¯‚Ž
Eó¹ 9T3Ò.gþa\ý ·R²ksq/Éš˜&â~²gºŽ˜2x{/Ñ eªLì †EÓƒ†ñNM9a¿_ž‘7°b¹[x"üW +Y@ýç²ðâξJe4©ª&\æÅß’A5]Y¹ Bßë6.!ã'îÕøY Ú®æH«;‹|“’Õù ŠžpâKL(\B(› HZ£j?`N‚Nt5žðìÔ¾é6Z¡r+õžº›‰Št3ùVÊ +,j`%<¼C~Ìò=lqH;Z¦rÔ*µüÉPø2~¸¬Ï¨6ÃM> ¯âV™Þ‰˜HªÔ GzÀ•‚KÅî‡\¢Ðþ’ ñÉ®Š–º”øFu7"ɵYò‡ +Ë´büÇðæ}Ý°”\cÂr”ß´^l¢²ž“íªõ +½Yûd¹ÎrÈò†„W:‚Û ] f7¼à‡“f^êqMÐ]¿Fo~ +[œbí¸uu?fÀÁ’àâL£IÎÆ6uôÏê¢:ï ÂÒº³ð ¤»¢nÞ RÿGßš‡ Äq^L ãô<ô±ì7°X’ßMC#4èŒA:þ‹‚|žæ ™J‘òª¯C¼A|/RÊCíV2 €2={ 9ÿ¶¬æÇ)[V«ÖkŠNÀMËã…lºq=8SŽ2<Go7Ìb<9gYÈ +Ò·E°²1Ìr‘xÔ> ër±ÂÖhe“žò- £qYkŸ(ûâQuµŠ Ÿ÷s¤ß»ÇNaÇPô˜lµ‡q¯â ôIoØ?ËŽhCY©\ø€XšµÜKkn¯tKƒ‚oÍÅPÙ‚‹*%¿ +ßbÔ8Ëœ„†úÛý¶š×\´7×%á(úAE¦ÄÊ|¶ùê;Dü<”ùe#T™RÔ ÔóH¿$¡ Õ4 “¿>òÇ¿ê($¦,rRy*¦‹rýÛþ)€®ÁãeѾø'’ÓqÜÔØSž‚ï%ý¸®‹ht ˆ2ñ;ç LU[âô£0‹hÊC§üú4EΚ~xPúèÂËO‘Y)\çfœú9†Wk.ŒšVt\•ÉEÌw Jq8> +33c>™ *JEQÇ£‰3Xèˆú—óQ¨Ðu ·0R”C>úè.\ë±c8¼¡Z}°í÷§øñ•ƒÃ7@fw’UBù =ÞÝ’d§ÙV-É÷ø+¹¶;B^Žâs¹¹}õg1Òîôƒ(ƒ—Û›]ªO,³¶Îýq$ó-Í*Àù!¤÷3±øªäëA‡¯óÐ\þæè5††×všÛ`¡¥÷Õgƒ
e×Ó}ÑÄ9[¨YXW è2JçXµG@¯Œ¢únÌ{¨ [7¼ 6ÔŒ´V¬ñ Osͬ£ÕsPÑ4Fv¶ÓzCÀ¡àò&î +‚ãèýU_î]sUûPŸjk º·Ã)$ +›A
mº Ó‹¤Â"µz]Ð)1Yæé Ji«B´VääåAšVcD‹ã4Î=\CÖp7µ«”&ùô`¿-Àãí¾–m ¡Ò(d¾)~øâ06B°î‡š•ò'åŽ_ÅwboQZ"¿;#±Ê¬n5ü›õ—¬GŠ_2>“ºõ‘†Á½ XÄ°¥æS‘áÁwfJ¿˜Fš,ÇôûÚ®kr=]ÄÝ<0M +«¡úá:ÝH<ÿ•hYÔ€[ΙEÎæ8j¿íŒFÂ(È&[J5¨¡âŽ5¤íçfçíÍYÆúžë«ú½óÏX¿¯ì!YwÜuÃa‚¶ã×$%£ù f«çhÐêpÏæ žpÍ$õë¹ÂÐó ]µŽû¼÷=7PJ$3OÒ›üpr¾ÔSž•r´Zx›DñÈb‘y— +ÃŽPP7t1ÍA ]4‡]7œ©'WÙ^Ö'‚žØð/*>d¿ÙØËH)Í ]‹çL]ž4 òQ G‚wx'âñ1ÜÂ6±»^MØ]»T V/]Ãø[oâñ{»+1©ŽÞ~Ë'Sò¯ú}ZD@òrÈ!h/¦-Êë Â\ç•rWÑãòV
Ï%Wü÷
3ЫöQß4s¬7-zoF‘®@—üО¸øÚ»ˆ2šèØ^+$h$i™)Ü°‹K¢ˆÖ™ÐÕŸVÎëÎ;_‹åF©!Ó‡ý¡Ü¡‡hŸÿÀG!Ö3°Eæ}xŽ“ÅÛéè}˜5Zz<-ÍU.¯… +GgC:ï¾>l†}Å%LŽl]o yåäÜùêÓ¬|:i‹óe²Ô zLÍ
+â„´«ËšÀx½EnZB ¿ZÄ{˜. VD-³P¢>à”Ùá5úšöh,µ¹ˆÇ>Ì€ßK¾‹Úe¥l‘šJ]œÓ¯Yïºà¶xͯž
–e'./]GãWï9$E¦0þÍʺc{Oß/ 6ºtçD{•½øʃ ŠÈ:bôÓÐJVO¼/UÒb‡m·‹8øå»Û<½gBNU,©clì«`*„ñùC1•z{ +ZŽà,ÚàeéS æòùÛ¨N±æ!°,}CJ‟CÕBc‘G /‘ÞìDTÈ*i–r¯ÐÒ±íȶ\7ú˜inÚƒe$#™zí(UØ{# k¼v~{C·2bµbO¼¯&íܽIú–˜jépWí;£ "Z$8¶w®0³Úèšî¬Cçy–cEøFD6´,9”l°6Æ4X¶º–郾’c®€›‚ +ñì·w}ØZÑ‘ö;…?¨íN×T™Bí’õYC, ¬~Øþ +úÒTì.,UàZ½J¤í5æõ217j,8zª› +{*Mo“ Ñšm,?Ñx€¢É#®Oúq+šÃLʤÆ]QGDÖ" šö¯?Rf£l?ìžÏáxµž(EÖ+ íÒ#ý¢1‹çF;G³øšÞH÷:ÊÎâÑ¿GˆÅw “b–Ж+Opq{a‚¬1÷ƒõÎÙ +É íë/ûRÈTÝÜõXV)·z ÝîÀŸóq½g¦ÃÙö} †Ð|dÚ [ž/€.F–yFF¬c£ +§O¢Š,Ò©å:äïûhÈIÅKz;ÌK“'€ÇbäÛ>ÿW¨µš‘ôšÿ1vÁà¤aéßîçIÄYè,ȇË×›À‹;aÍ°Svçá„«°úÌ[Oÿþ¯8û$ >wZÁAÌ¿Œ‡Cl£ FX×ñ±ÁÊu™|¶Qf ÿ +U+‹Ò§¯Î·h3à à3+Ä^{egÁ +¦Q4M;8§GLMß}éÏ€à*_¢4ýVR‚€¥Ñ3~Û¹UÆ>ô“†ø`Tˆøømó„i»B*iíÂ5•>uÜž¨ zt ã(g» ÑöϬV ªóM´`‡ßÀÇ H¡ á o ”[heè ‹ôŸ;2d^½@à¦â KI
àn
EŸ©‡Œ²Ÿ´Ž +¶3;àßÐ7¨ÄýæÙúãǷ*}QúCÍ +t vPŒZŠ€ +®)²Ö’Ó÷rHjà¡ž¢³•òî6Óã]ÝqY‘»È_ +Çõgš|ÊFˆWu‘¨iôœhͨ>Õ¡è`²âiaP"Å3#A"Ta½"C;bîn?È{Ž}\W«€HÔqq+÷ö‰ Ñ}5lJKŸàŽÄù"ŽÝ ìÓDÕÄH ¹ “= wi0¤ó tay¾h\Q0Oâ¾Ü\R¸ØIñÙ"Ów¢RÁ…ŸÞœIª‡R6·L†&½"×ûpOJÒG·NŠÊ +I‹AÓë‹°5·¯‹õ¢[Múid‡Ü¡Tëå éëø Ê®²¦-Пî÷Š‹Ï¹à+˜ðj8L£ã-‚O[Ò^佘¥Ã öÖ]qö„a.Vï~>™“/ó‘a#`ˆ +‡+XrïéÉœNæl¯Áóh;KîL±iž]‹QÇVÀáð…ÄêøÂÔôO#åùBYP Jûí Ê‹ý€YÜÿÊh 9´zi©í›dþ[”kÏo@$Ò4‘õÙ:å†.ŽzÖh‹¶Æ +ÙÙþÿ
Iýç¦í V•ë+µ™û-\Þ\ER—¨ý&¿·+‘H‡‘‰‰ån€ „P=P]*°?˜Žk|mÌhŸPhíR4Ôé°Ê™.—o(Š¥H•vGU}•©xpè‰m:¶ÙUUt´âª8ó[Ïlÿdÿ!a€¼1FܼŒÂ H}‰PáKNéq“4°okkdJæwÞã Ë.Êf“×Òi›wEÓ=k÷£À]·ÃNYMï†|\lÎ?Œ8&“ƒ,…ŽOã9P¦VÖOŽÍÓ: ¿ƒ9îÎU7ö| ÑSiä’’!XŸÉG
»;XÓ¯r˜¥íþ{·Ø>Nû&Ëj{¤ +Ñâȧ/ Ñõ]Y+÷F{ï^!~9Èb¢€Ò¡“F_¸__ÛÊtš˜‡f¡˜` ‡ÓÙtï\ÌåÛ +í +·?¤ôeí´lªŸ ¦\}-{8‹íèÓ\K&åÿÁOv(Ç‘nÀr5“ æw WRi_·þƒ ®ÇèôM
"žÐ$ ¥ V`y¼ +a¼”[1\&º¶Fr9Q¡Î¦òŒö¶8ÔIãby±-šÂÖ OtÃ܃ÇO%Ó +îöÝ4ä pÛ8šNØ`BB« ¢~½u$¥ õ :[›ŽbGtJWêò¤H3ª#×óéN9ÁôI,ȃ„±‘.yv¨mxŒítÖpO§Â]V~oµW§b4ÕÉÈe¼ ˜I çø%û;Sšƒž¹øO3–6 +¢gçÖ|pòÆ ˜ _EZ
›Mdä¾Zú“`F÷ £M"ó†PD–©ŒúòÎ%Ç”ê&JÓï¢+çE¤ÛÁÒ4oƒ_ÌµÍ +¿.+³pεvt ›9ºø¼¸•èe|b“프/iº½³ûèÁrN’Äzµã-„ š} ÿ_Âë^iâžï:#yW3œ ”rÏú;˜0ß÷>•Ïg:-—è_¬êlC3ÂÆYZZçÚx¯½.+mnpªË€Imwøυ€^¥ñ€›i±¥=&§)f„€ÃÜ
““ŽxÍ2Až¾øFÖŽ¬%|ì ê@’/!!ÆØ–„<+rQþèɤߺƓŒ +hIŠsÀnçg•¯¹(6OÇ|C¤žíýf mÇb6°ŸÇÄÿÒOÝœØ6$ôÙPóä{2ýZN®_⋼ï?ºªHù|) +n'v«“Ï„GR“g³½'E¼zæ¤vrË‘ìà4‡ˆGŸæ1Gê…lfÈÿ¯ÅúzÿÈ• +ÅéÍ[«ÏT|t‡nDÒ{C-„8¦qÁm$÷æœã<X,Zš3½*…ç»ÎeEãDõ¸ St*à¤:ì`5J¬ä¢o +%:/Ò @†óÙ…¿ºÊ¿ŽX‹ ZÅCË’‰û|]'xÍ:Èü ú¸»:õëd²Op.«°çGíQ“µŽt‰îŠ"ÎG Θ (ϾÓs+·äÉñ`6åòþºç7Û r}†-™UG0é ™Í¯¢ +Æš×p£Yo`8*5¾#Ýî‚VÖ†d,;@ó¬ßJœ$ÏŽÚÀ*~ ö<hÓûI!‹chZZˆy#¾2é• +…Š”ùJF±kf,庎\—rËlcˆz¤Æñî‘ð_ÙS‡ñÄÂŽ<`&é4Š=$µxN¥§–óü—ÉÑ—Ü€'(3¶ð-yYp7Òf•HÑÓjL‚#Nú 8í>w¥¼\ó7 ì‰á¾:‚‹— î⨞–Ž¿‚áéJ¹™N1>¦p‡
$ £$EâiY8#’>uðu%»Æž&"õ>Y„ZC +Üôi¸B¸Â üøEྩ«vÛ·µ~»Àùe£ }Eº ûùˆááz@÷¸&h›‘׎:!ŠåD)½Žy»•oBÃÔO†œ´ðN Ÿ?+?OgkÝ°
f¼pƒIßrès8ÓM¬z÷ ;÷ü1ɺƒ:« ‚=Þ¶2è¦:‘)tìúº*£¾ïì׋R½Ü¥§Vêïp‘ÀÔUKqIB–+»{à— ¡ÃIÃc ¯+Á1Îa ¨”tÀP í¦A—WQëjW;q::u´l¤Vê›fjd0Ò‰Ù†p~™¬¶} åägxyÖdŒ”êàú¦2ïAkØ=+
¥. ‘ÿ[Jú +§ù˜^þPTà,eZß ŒÞWÆÐÙÁæá~œÒ(&€Îä9øð>úwÕèp°Ãhà-eâ/ðVˆˆ}g? ˆØîÞV¯äo|\ÆyWÜþÿC~„«/lÈÇžŠŠ ”–j™|?;™ qØ,cÄmgÓ^riì¯]¡”^ãÑ ”{˜‹îU.¸ º0Þ«$qíÙéÂRéãOäö·'M3“ƶ¡Å-ê’Ù÷ð†Ód¡ÔMUÊ” nƒ†Kø½ ¹5uêòA¦åœÂvÒ°¹kÜCû8ƒ)ü)l>̆á‰jÜfÝú‰ó4–WF"—è#a<QððÀ‰•›Š]{  cT +]ÐoÏþ%oËã°"í¹×f0ß!¸éêȉ)E¾º|üúÖ¾ Ãœ#è>%ƒ¯Ðw<ZFDíEõ O—«Ã.E",—&áãµ4ל¯é®?µ,”}¼J·bÑÄbYDä]ÆÊpáÞ*á´‘ÙÐB—Þ‘ÃÈìaÈwš…¡Jb±$MIBÖ”«>¸>Òq¾T»Îà³è…‡˜®ˆd»}wÔ{© w=ƧIsQ[¾]MÔÿíªø[׻ݑû<u
¼—aA–ÕvJ§¿ ùf‚ˆ°—ø4d"ÍGÝ8s›úøõn4†ÏV +ÍÊI ƒ}cäU"ØŸÊ鑯湅m,µ]b»ßÓ ‹Ý…[ ¥<ž¾øˆ:åZ3yžzuÔ¹uºâ³}nóñ"IÀ\Èõú†°É»;18®!êÆgAV;´Þ¶`^‰Þ LöÍëËs‡ØoxtÑž¬Ê +?¡ƒ¬×œÍЄ¡àëHЧ¹ +VËùúÅ 3Ù»5dq‹—à¥B— +Qn*Š,=£¦o’äÞ¬…Æ :ßI©n:.ß7×2ׇK–ùÞ Öÿ¯Ïøµ ++C o~Oø ý¶õç¶}¨²bd¾în‡u 6xÜà…ŒTûÏ´¸¾¦ÑŒé[ã~7ÃJBzkº½,‘ÜxSÿà4=Ý*-ƒŽ80mäà^ h$Ãü¸R«²R.îE°çƧxg–F Iæu¶÷Ë€Î=}Ë“•ú Þô&É‹Ôy½mÆ MJ"e#ÌÁêýNËaàûDA>¿œÓ +~ĵÆÚØEC&9w˼¤ìT.0ô%I+]ªîøøÈTѬ܆A¾wóHŽçôýL9¢QTÌ= +ÀþŸ}&‡v½ôs»uâàf{-Âw ÈÈg¸C¢–«·ôâÉT5'ûpLzƒ áÊQ•Á°Y=ìêPhAª jB:?ï Îw+«Ä¸l~…çis¼ñA" ·Z}ËQˆ<Þ{nSA$2º¦Øàû +i ðÞåszáÙcúüñÂúª WMü…*¬Vr×^e¹„y¬É +¦Òá3kï$|U¥³²¸ã³sqÇDu–YÛ[,‹-¿ö I9þW¹) Ú.¡³Õ5{?BB[JËÂkcÞÄ¡Â mÔÜ+?Ö‚{¸d©#AúßA Ó†Kn"D|±aÕ¿v [¨/4 #“@Ú6Â/>;¡©ø›_Â5hl J\}2%úÚIÊùtÞ¯ëåT-냲 Ó¥!fÍò·:€¤(¾¨s“rÃq2’J)½EüÑ–½`u'3 ϘqÝ &äæ+õtþÑœ·±aœâôí“ô÷{ÎI£| "×M#+ïÒÂXoøL@ŽCs ι 8ìGQé*¶ëX¾úçf"Þ§ ©Õ5ÿVn´øõª3ˆf$¤FéáéÂj™zm[ØWB +š*B“rf·ã!Öo¬pýþk°Ð&Ÿ3ÛÁQùBå|ÒX¦j2c¢ŸXO󛃧$Žä©Ÿw©Îà‚€«¿Ò>@§ã¢%—¡•áw”Ãô[Ö ÈxÌ +<«¸Â€ðg“µgÊ@ +œBŽW½uö¾ÙN*;k–Í=ž(úî¬Ë¹º"¡«'[9(Î9×uq¾Øéõ)m’i;h‰Ö“ÑÇŒ±²‘m‘»›NÑåL¾.‰”ÞÌÖ,ºÐðhP©Ã$8Øÿ寺.)¢Ê㟨šºø¤îÒ È“¿q”qrfz78WõÀ‚mµÂß6Býiçù²ƒ‰ ˆÜ±FßœEļ^VMË ò:Y¦R×a"—qÝ·eˆý ø>Þ$‡Rv ®5_6wÂoìÖ1Ò—!|€DÞÌ‚Ñ´Â ponx¢yÁ ºJ»HÌAøâz #y®9‰¡ýîÝÁ©`âò¨Ÿ0ê9~«Ñ€6ö”‡Äm>‚1ÔafoÕŠHêà×@ôf÷¸,b~Üó7ÝeÚåz@Ÿp4ï1óO©h°‰Ôùà +Ú° "2hZRÄYÜlRFÓ¼æûêHJX›Wgƒ:‰*˜“tm§é(yåøÙ¾®Ûy5ƒ^×QI£ ¦»t‘7†)ð`›¨uÇâʉó¹!¦R{xëÓ£KãJ<V`ªôZ¸¼J ¤‚ÉHRÖÏ.e°:è„·- +F4ê¸M_`fm;ž +è9n6r2¢Ä´@ã¬Ýg$X¬Êߥ¼`ˆSØWª
º‡ßh½‚oe*>Î +Áèúlf B{‡ßÍÄâR TÛXëmõzVïÍ)›"‹Ve)ßóÓ3æÄÕ2`]l¤¸“2ÝÀ),«^@ãPèóC܇“iWŽëUÏ\¹A¡ —yÃHƒ?»ëØŽ†×4ÃLØ7Ñ;°2}óvŒ » +1k DlÞOZÚ€ë'à É“ðpÖÖ &ÇФضNXYE‰Ëbº4%^›vOYæŒ[DãÝ»°d"?¡ÎsÇ•™1Ô¦˜ ZšP ¼^TøF:.©ßo¶B)<I´ÜúKáèÒÿNA|z°I ‚áƒ`(byPb©ŠN'|¦hª=Ec?ãñC¦dº"¢o™±u^n9FBt"±¾QÓðœ™|ß’MÈe§–’Ç™ÿãÁi]#&Ù˜ª™¼X(Æ ¶|˜²¥v´/L-Ô{‡†þRûÅp‰CÆGü[¢Ufv¨åòÒÄ´ÕòD^>ã$HnÅÐFÛ|†#`'¼&ÄAVSË(š Ù ðíƒ-ã:Cþ«™IÖ¶lV2¸Ï_aö —ÿæ}¨ä4ÚòœŸ[#ôöôLÉYäÊž µìhŸ†CgÈÌš +÷„S„I"©LåGŒ'jÈáM¨ÑØâ×dJ3ïw©gpLÆÑÌ^‘ýŠ l¨nÿxð— µÚ¡|0Û ~ômAMB°QžeÏ€ê +TzY“Ò6ÍC}Ù”à!Îx¥ƒòpŸe%‘\èi?ûßÝλŠ"¨7W÷ý ê?ÌèîÔšCàˆƒ¿Üè&ó ˜<ÔnÖ¹[1™¥d}Iœpó +# Automatically generated file; DO NOT EDIT. +# SeaBIOS Configuration +# + +# +# General Features +# +CONFIG_COREBOOT=y +# CONFIG_QEMU is not set +# CONFIG_CSM is not set +# CONFIG_QEMU_HARDWARE is not set +CONFIG_THREADS=y +CONFIG_RELOCATE_INIT=y +CONFIG_BOOTMENU=y +CONFIG_BOOTSPLASH=y +CONFIG_BOOTORDER=y +CONFIG_HOST_BIOS_GEOMETRY=y +CONFIG_COREBOOT_FLASH=y +CONFIG_LZMA=y +CONFIG_CBFS_LOCATION=0 +CONFIG_MULTIBOOT=y +CONFIG_ENTRY_EXTRASTACK=y +CONFIG_MALLOC_UPPERMEMORY=y +CONFIG_ROM_SIZE=0 + +# +# Hardware support +# +CONFIG_ATA=y +# CONFIG_ATA_DMA is not set +# CONFIG_ATA_PIO32 is not set +CONFIG_AHCI=y +CONFIG_SDCARD=y +CONFIG_MEGASAS=y +CONFIG_FLOPPY=y +CONFIG_FLASH_FLOPPY=y +CONFIG_NVME=y +CONFIG_PS2PORT=y +CONFIG_USB=y +CONFIG_USB_UHCI=y +CONFIG_USB_OHCI=y +CONFIG_USB_EHCI=y +CONFIG_USB_XHCI=y +CONFIG_USB_MSC=y +CONFIG_USB_UAS=y +CONFIG_USB_HUB=y +CONFIG_USB_KEYBOARD=y +CONFIG_USB_MOUSE=y +CONFIG_SERIAL=y +CONFIG_SERCON=y +CONFIG_LPT=y +CONFIG_RTC_TIMER=y +CONFIG_HARDWARE_IRQ=y +CONFIG_PMTIMER=y +CONFIG_TSC_TIMER=y + +# +# BIOS interfaces +# +CONFIG_DRIVES=y +CONFIG_CDROM_BOOT=y +CONFIG_CDROM_EMU=y +CONFIG_PCIBIOS=y +CONFIG_APMBIOS=y +CONFIG_PNPBIOS=y +CONFIG_OPTIONROMS=y +CONFIG_PMM=y +CONFIG_BOOT=y +CONFIG_KEYBOARD=y +CONFIG_KBD_CALL_INT15_4F=y +CONFIG_MOUSE=y +CONFIG_S3_RESUME=y +CONFIG_VGAHOOKS=y +# CONFIG_DISABLE_A20 is not set +CONFIG_TCGBIOS=y + +# +# VGA ROM +# +# CONFIG_NO_VGABIOS is not set +# CONFIG_VGA_GEODEGX2 is not set +# CONFIG_VGA_GEODELX is not set +CONFIG_VGA_COREBOOT=y +CONFIG_BUILD_VGABIOS=y +CONFIG_VGA_EMULATE_TEXT=y +CONFIG_VGA_FIXUP_ASM=y +CONFIG_VGA_ALLOCATE_EXTRA_STACK=y +CONFIG_VGA_EXTRA_STACK_SIZE=512 +CONFIG_VGA_VBE=y + +# +# Debugging +# +CONFIG_DEBUG_LEVEL=1 +CONFIG_DEBUG_SERIAL=y +CONFIG_DEBUG_SERIAL_PORT=0x3f8 +CONFIG_DEBUG_COREBOOT=y +ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿLARCHIVE +/* DO NOT EDIT! This is an autogenerated file. See scripts/buildversion.py. */ +#define BUILD_VERSION "rel-1.14.0-0-g155821a" +#define BUILD_TOOLS "gcc: (coreboot toolchain v2021-10-21_02750d0400) 11.2.0 binutils: (GNU Binutils) 2.37" +ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿLARCHIVE +‰Ø1ÿéUÿÿÿ‹Uä‰ùÓâ9ÂsëCÿ1ÿé>ÿÿÿf1Àé5ÿÿÿU‰åWVSƒì,‹E‰Eà‹] ‹u‹}‰Ú…ÿu69Þ†– +ö„$@ RPè¼ÿÿÿZYÃVSƒì‹D$$T$‹\$ ‹t$(‰D$C‰t$ èÍÿÿÿ…Àt'‹…ÀDËP‹…Òt‰t$(‹L$‰D$ ‰L$$ƒÄ[^ÿâƒÄ1À[^ËT$‹…ÀD‹P‹R…Òt‰D$ÿâƒÈÿÃWVSƒì‹D$(T$‹\$ ‹t$,‹|$$‰D$C‰t$ èQÿÿÿ…Àt)‹‹L$…ÀDËP‰t$,‰|$$‰L$(‰D$ ‹BƒÄ[^_ÿàƒÄƒÈÿ[^_ÃWVSƒì‹D$(T$‹t$$‹|$,‹\$ ‰D$F‰|$ èðþÿÿ‰ÂƒÈÿ…Òt ‹ÇC uRRj
j - + @ºH -‹s‹SëD‹D$sƒàƒúh‰D$ ‹uƒ|$ -PhÞêÿÿjèÆôÿÿD+ÿ‹T$ #D$L +‹s‹SëD‹D$sƒàƒúh‰D$ ‹uƒ|$ +PhÞêÿÿjèÆôÿÿD+ÿ‹T$ #D$L ƒì hÅëÿÿë QQj RRPh ìÿÿëæ¸dïÿþƒÄ ÃUWVSƒËÿƒì(¶D$@‹t$<‹|$DPèAÿÿÿƒÄ…À„— hÊìÿÿjèÕìÿÿƒÄ Çïÿþ ¾DÐëâ[ÃSƒì‹ ”ïÿþ…Ûu-¸ -ÇD$4Žíÿÿë<‹H ·p‹8‹h9ñs@Q‰P kÉ È‹L$‰X‹\$ )ù‰Hë9Ö‰Xu ÇD$4¯íÿÿÇD$0 -ü - +ÇD$4Žíÿÿë<‹H ·p‹8‹h9ñs@Q‰P kÉ È‹L$‰X‹\$ )ù‰Hë9Ö‰Xu ÇD$4¯íÿÿÇD$0 +ü @@ -1826,11 +2241,11 @@ hÊìÿÿjèÕìÿÿƒÄ Çïÿþ - + coreboot-%s%s %s bootblock starting (log level: %i)... - + … @@ -1846,7 +2261,7 @@ The next stage will run slowly! - + @@ -1857,5 +2272,5 @@ The next stage will run slowly! - -% + +% diff --git a/payloads/external/SeaBIOS/.gitignore b/payloads/external/SeaBIOS/.gitignore deleted file mode 100644 index f9990feb..00000000 --- a/payloads/external/SeaBIOS/.gitignore +++ /dev/null @@ -1,4 +0,0 @@ -out -*.pyc -.config -.config.old diff --git a/payloads/external/SeaBIOS/COPYING b/payloads/external/SeaBIOS/COPYING deleted file mode 100644 index 94a9ed02..00000000 --- a/payloads/external/SeaBIOS/COPYING +++ /dev/null @@ -1,674 +0,0 @@ - GNU GENERAL PUBLIC LICENSE - Version 3, 29 June 2007 - - Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/> - Everyone is permitted to copy and distribute verbatim copies - of this license document, but changing it is not allowed. - - Preamble - - The GNU General Public License is a free, copyleft license for -software and other kinds of works. - - The licenses for most software and other practical works are designed -to take away your freedom to share and change the works. By contrast, -the GNU General Public License is intended to guarantee your freedom to -share and change all versions of a program--to make sure it remains free -software for all its users. We, the Free Software Foundation, use the -GNU General Public License for most of our software; it applies also to -any other work released this way by its authors. You can apply it to -your programs, too. - - When we speak of free software, we are referring to freedom, not -price. Our General Public Licenses are designed to make sure that you -have the freedom to distribute copies of free software (and charge for -them if you wish), that you receive source code or can get it if you -want it, that you can change the software or use pieces of it in new -free programs, and that you know you can do these things. - - To protect your rights, we need to prevent others from denying you -these rights or asking you to surrender the rights. Therefore, you have -certain responsibilities if you distribute copies of the software, or if -you modify it: responsibilities to respect the freedom of others. - - For example, if you distribute copies of such a program, whether -gratis or for a fee, you must pass on to the recipients the same -freedoms that you received. You must make sure that they, too, receive -or can get the source code. And you must show them these terms so they -know their rights. - - Developers that use the GNU GPL protect your rights with two steps: -(1) assert copyright on the software, and (2) offer you this License -giving you legal permission to copy, distribute and/or modify it. - - For the developers' and authors' protection, the GPL clearly explains -that there is no warranty for this free software. For both users' and -authors' sake, the GPL requires that modified versions be marked as -changed, so that their problems will not be attributed erroneously to -authors of previous versions. - - Some devices are designed to deny users access to install or run -modified versions of the software inside them, although the manufacturer -can do so. This is fundamentally incompatible with the aim of -protecting users' freedom to change the software. The systematic -pattern of such abuse occurs in the area of products for individuals to -use, which is precisely where it is most unacceptable. Therefore, we -have designed this version of the GPL to prohibit the practice for those -products. If such problems arise substantially in other domains, we -stand ready to extend this provision to those domains in future versions -of the GPL, as needed to protect the freedom of users. - - Finally, every program is threatened constantly by software patents. -States should not allow patents to restrict development and use of -software on general-purpose computers, but in those that do, we wish to -avoid the special danger that patents applied to a free program could -make it effectively proprietary. To prevent this, the GPL assures that -patents cannot be used to render the program non-free. - - The precise terms and conditions for copying, distribution and -modification follow. - - TERMS AND CONDITIONS - - 0. Definitions. - - "This License" refers to version 3 of the GNU General Public License. - - "Copyright" also means copyright-like laws that apply to other kinds of -works, such as semiconductor masks. - - "The Program" refers to any copyrightable work licensed under this -License. Each licensee is addressed as "you". "Licensees" and -"recipients" may be individuals or organizations. - - To "modify" a work means to copy from or adapt all or part of the work -in a fashion requiring copyright permission, other than the making of an -exact copy. The resulting work is called a "modified version" of the -earlier work or a work "based on" the earlier work. - - A "covered work" means either the unmodified Program or a work based -on the Program. - - To "propagate" a work means to do anything with it that, without -permission, would make you directly or secondarily liable for -infringement under applicable copyright law, except executing it on a -computer or modifying a private copy. Propagation includes copying, -distribution (with or without modification), making available to the -public, and in some countries other activities as well. - - To "convey" a work means any kind of propagation that enables other -parties to make or receive copies. Mere interaction with a user through -a computer network, with no transfer of a copy, is not conveying. - - An interactive user interface displays "Appropriate Legal Notices" -to the extent that it includes a convenient and prominently visible -feature that (1) displays an appropriate copyright notice, and (2) -tells the user that there is no warranty for the work (except to the -extent that warranties are provided), that licensees may convey the -work under this License, and how to view a copy of this License. If -the interface presents a list of user commands or options, such as a -menu, a prominent item in the list meets this criterion. - - 1. Source Code. - - The "source code" for a work means the preferred form of the work -for making modifications to it. "Object code" means any non-source -form of a work. - - A "Standard Interface" means an interface that either is an official -standard defined by a recognized standards body, or, in the case of -interfaces specified for a particular programming language, one that -is widely used among developers working in that language. - - The "System Libraries" of an executable work include anything, other -than the work as a whole, that (a) is included in the normal form of -packaging a Major Component, but which is not part of that Major -Component, and (b) serves only to enable use of the work with that -Major Component, or to implement a Standard Interface for which an -implementation is available to the public in source code form. A -"Major Component", in this context, means a major essential component -(kernel, window system, and so on) of the specific operating system -(if any) on which the executable work runs, or a compiler used to -produce the work, or an object code interpreter used to run it. - - The "Corresponding Source" for a work in object code form means all -the source code needed to generate, install, and (for an executable -work) run the object code and to modify the work, including scripts to -control those activities. However, it does not include the work's -System Libraries, or general-purpose tools or generally available free -programs which are used unmodified in performing those activities but -which are not part of the work. For example, Corresponding Source -includes interface definition files associated with source files for -the work, and the source code for shared libraries and dynamically -linked subprograms that the work is specifically designed to require, -such as by intimate data communication or control flow between those -subprograms and other parts of the work. - - The Corresponding Source need not include anything that users -can regenerate automatically from other parts of the Corresponding -Source. - - The Corresponding Source for a work in source code form is that -same work. - - 2. Basic Permissions. - - All rights granted under this License are granted for the term of -copyright on the Program, and are irrevocable provided the stated -conditions are met. This License explicitly affirms your unlimited -permission to run the unmodified Program. The output from running a -covered work is covered by this License only if the output, given its -content, constitutes a covered work. This License acknowledges your -rights of fair use or other equivalent, as provided by copyright law. - - You may make, run and propagate covered works that you do not -convey, without conditions so long as your license otherwise remains -in force. You may convey covered works to others for the sole purpose -of having them make modifications exclusively for you, or provide you -with facilities for running those works, provided that you comply with -the terms of this License in conveying all material for which you do -not control copyright. Those thus making or running the covered works -for you must do so exclusively on your behalf, under your direction -and control, on terms that prohibit them from making any copies of -your copyrighted material outside their relationship with you. - - Conveying under any other circumstances is permitted solely under -the conditions stated below. Sublicensing is not allowed; section 10 -makes it unnecessary. - - 3. Protecting Users' Legal Rights From Anti-Circumvention Law. - - No covered work shall be deemed part of an effective technological -measure under any applicable law fulfilling obligations under article -11 of the WIPO copyright treaty adopted on 20 December 1996, or -similar laws prohibiting or restricting circumvention of such -measures. - - When you convey a covered work, you waive any legal power to forbid -circumvention of technological measures to the extent such circumvention -is effected by exercising rights under this License with respect to -the covered work, and you disclaim any intention to limit operation or -modification of the work as a means of enforcing, against the work's -users, your or third parties' legal rights to forbid circumvention of -technological measures. - - 4. Conveying Verbatim Copies. - - You may convey verbatim copies of the Program's source code as you -receive it, in any medium, provided that you conspicuously and -appropriately publish on each copy an appropriate copyright notice; -keep intact all notices stating that this License and any -non-permissive terms added in accord with section 7 apply to the code; -keep intact all notices of the absence of any warranty; and give all -recipients a copy of this License along with the Program. - - You may charge any price or no price for each copy that you convey, -and you may offer support or warranty protection for a fee. - - 5. Conveying Modified Source Versions. - - You may convey a work based on the Program, or the modifications to -produce it from the Program, in the form of source code under the -terms of section 4, provided that you also meet all of these conditions: - - a) The work must carry prominent notices stating that you modified - it, and giving a relevant date. - - b) The work must carry prominent notices stating that it is - released under this License and any conditions added under section - 7. This requirement modifies the requirement in section 4 to - "keep intact all notices". - - c) You must license the entire work, as a whole, under this - License to anyone who comes into possession of a copy. This - License will therefore apply, along with any applicable section 7 - additional terms, to the whole of the work, and all its parts, - regardless of how they are packaged. This License gives no - permission to license the work in any other way, but it does not - invalidate such permission if you have separately received it. - - d) If the work has interactive user interfaces, each must display - Appropriate Legal Notices; however, if the Program has interactive - interfaces that do not display Appropriate Legal Notices, your - work need not make them do so. - - A compilation of a covered work with other separate and independent -works, which are not by their nature extensions of the covered work, -and which are not combined with it such as to form a larger program, -in or on a volume of a storage or distribution medium, is called an -"aggregate" if the compilation and its resulting copyright are not -used to limit the access or legal rights of the compilation's users -beyond what the individual works permit. Inclusion of a covered work -in an aggregate does not cause this License to apply to the other -parts of the aggregate. - - 6. Conveying Non-Source Forms. - - You may convey a covered work in object code form under the terms -of sections 4 and 5, provided that you also convey the -machine-readable Corresponding Source under the terms of this License, -in one of these ways: - - a) Convey the object code in, or embodied in, a physical product - (including a physical distribution medium), accompanied by the - Corresponding Source fixed on a durable physical medium - customarily used for software interchange. - - b) Convey the object code in, or embodied in, a physical product - (including a physical distribution medium), accompanied by a - written offer, valid for at least three years and valid for as - long as you offer spare parts or customer support for that product - model, to give anyone who possesses the object code either (1) a - copy of the Corresponding Source for all the software in the - product that is covered by this License, on a durable physical - medium customarily used for software interchange, for a price no - more than your reasonable cost of physically performing this - conveying of source, or (2) access to copy the - Corresponding Source from a network server at no charge. - - c) Convey individual copies of the object code with a copy of the - written offer to provide the Corresponding Source. This - alternative is allowed only occasionally and noncommercially, and - only if you received the object code with such an offer, in accord - with subsection 6b. - - d) Convey the object code by offering access from a designated - place (gratis or for a charge), and offer equivalent access to the - Corresponding Source in the same way through the same place at no - further charge. You need not require recipients to copy the - Corresponding Source along with the object code. If the place to - copy the object code is a network server, the Corresponding Source - may be on a different server (operated by you or a third party) - that supports equivalent copying facilities, provided you maintain - clear directions next to the object code saying where to find the - Corresponding Source. Regardless of what server hosts the - Corresponding Source, you remain obligated to ensure that it is - available for as long as needed to satisfy these requirements. - - e) Convey the object code using peer-to-peer transmission, provided - you inform other peers where the object code and Corresponding - Source of the work are being offered to the general public at no - charge under subsection 6d. - - A separable portion of the object code, whose source code is excluded -from the Corresponding Source as a System Library, need not be -included in conveying the object code work. - - A "User Product" is either (1) a "consumer product", which means any -tangible personal property which is normally used for personal, family, -or household purposes, or (2) anything designed or sold for incorporation -into a dwelling. In determining whether a product is a consumer product, -doubtful cases shall be resolved in favor of coverage. For a particular -product received by a particular user, "normally used" refers to a -typical or common use of that class of product, regardless of the status -of the particular user or of the way in which the particular user -actually uses, or expects or is expected to use, the product. A product -is a consumer product regardless of whether the product has substantial -commercial, industrial or non-consumer uses, unless such uses represent -the only significant mode of use of the product. - - "Installation Information" for a User Product means any methods, -procedures, authorization keys, or other information required to install -and execute modified versions of a covered work in that User Product from -a modified version of its Corresponding Source. The information must -suffice to ensure that the continued functioning of the modified object -code is in no case prevented or interfered with solely because -modification has been made. - - If you convey an object code work under this section in, or with, or -specifically for use in, a User Product, and the conveying occurs as -part of a transaction in which the right of possession and use of the -User Product is transferred to the recipient in perpetuity or for a -fixed term (regardless of how the transaction is characterized), the -Corresponding Source conveyed under this section must be accompanied -by the Installation Information. But this requirement does not apply -if neither you nor any third party retains the ability to install -modified object code on the User Product (for example, the work has -been installed in ROM). - - The requirement to provide Installation Information does not include a -requirement to continue to provide support service, warranty, or updates -for a work that has been modified or installed by the recipient, or for -the User Product in which it has been modified or installed. Access to a -network may be denied when the modification itself materially and -adversely affects the operation of the network or violates the rules and -protocols for communication across the network. - - Corresponding Source conveyed, and Installation Information provided, -in accord with this section must be in a format that is publicly -documented (and with an implementation available to the public in -source code form), and must require no special password or key for -unpacking, reading or copying. - - 7. Additional Terms. - - "Additional permissions" are terms that supplement the terms of this -License by making exceptions from one or more of its conditions. -Additional permissions that are applicable to the entire Program shall -be treated as though they were included in this License, to the extent -that they are valid under applicable law. If additional permissions -apply only to part of the Program, that part may be used separately -under those permissions, but the entire Program remains governed by -this License without regard to the additional permissions. - - When you convey a copy of a covered work, you may at your option -remove any additional permissions from that copy, or from any part of -it. (Additional permissions may be written to require their own -removal in certain cases when you modify the work.) You may place -additional permissions on material, added by you to a covered work, -for which you have or can give appropriate copyright permission. - - Notwithstanding any other provision of this License, for material you -add to a covered work, you may (if authorized by the copyright holders of -that material) supplement the terms of this License with terms: - - a) Disclaiming warranty or limiting liability differently from the - terms of sections 15 and 16 of this License; or - - b) Requiring preservation of specified reasonable legal notices or - author attributions in that material or in the Appropriate Legal - Notices displayed by works containing it; or - - c) Prohibiting misrepresentation of the origin of that material, or - requiring that modified versions of such material be marked in - reasonable ways as different from the original version; or - - d) Limiting the use for publicity purposes of names of licensors or - authors of the material; or - - e) Declining to grant rights under trademark law for use of some - trade names, trademarks, or service marks; or - - f) Requiring indemnification of licensors and authors of that - material by anyone who conveys the material (or modified versions of - it) with contractual assumptions of liability to the recipient, for - any liability that these contractual assumptions directly impose on - those licensors and authors. - - All other non-permissive additional terms are considered "further -restrictions" within the meaning of section 10. If the Program as you -received it, or any part of it, contains a notice stating that it is -governed by this License along with a term that is a further -restriction, you may remove that term. If a license document contains -a further restriction but permits relicensing or conveying under this -License, you may add to a covered work material governed by the terms -of that license document, provided that the further restriction does -not survive such relicensing or conveying. - - If you add terms to a covered work in accord with this section, you -must place, in the relevant source files, a statement of the -additional terms that apply to those files, or a notice indicating -where to find the applicable terms. - - Additional terms, permissive or non-permissive, may be stated in the -form of a separately written license, or stated as exceptions; -the above requirements apply either way. - - 8. Termination. - - You may not propagate or modify a covered work except as expressly -provided under this License. Any attempt otherwise to propagate or -modify it is void, and will automatically terminate your rights under -this License (including any patent licenses granted under the third -paragraph of section 11). - - However, if you cease all violation of this License, then your -license from a particular copyright holder is reinstated (a) -provisionally, unless and until the copyright holder explicitly and -finally terminates your license, and (b) permanently, if the copyright -holder fails to notify you of the violation by some reasonable means -prior to 60 days after the cessation. - - Moreover, your license from a particular copyright holder is -reinstated permanently if the copyright holder notifies you of the -violation by some reasonable means, this is the first time you have -received notice of violation of this License (for any work) from that -copyright holder, and you cure the violation prior to 30 days after -your receipt of the notice. - - Termination of your rights under this section does not terminate the -licenses of parties who have received copies or rights from you under -this License. If your rights have been terminated and not permanently -reinstated, you do not qualify to receive new licenses for the same -material under section 10. - - 9. Acceptance Not Required for Having Copies. - - You are not required to accept this License in order to receive or -run a copy of the Program. Ancillary propagation of a covered work -occurring solely as a consequence of using peer-to-peer transmission -to receive a copy likewise does not require acceptance. However, -nothing other than this License grants you permission to propagate or -modify any covered work. These actions infringe copyright if you do -not accept this License. Therefore, by modifying or propagating a -covered work, you indicate your acceptance of this License to do so. - - 10. Automatic Licensing of Downstream Recipients. - - Each time you convey a covered work, the recipient automatically -receives a license from the original licensors, to run, modify and -propagate that work, subject to this License. You are not responsible -for enforcing compliance by third parties with this License. - - An "entity transaction" is a transaction transferring control of an -organization, or substantially all assets of one, or subdividing an -organization, or merging organizations. If propagation of a covered -work results from an entity transaction, each party to that -transaction who receives a copy of the work also receives whatever -licenses to the work the party's predecessor in interest had or could -give under the previous paragraph, plus a right to possession of the -Corresponding Source of the work from the predecessor in interest, if -the predecessor has it or can get it with reasonable efforts. - - You may not impose any further restrictions on the exercise of the -rights granted or affirmed under this License. For example, you may -not impose a license fee, royalty, or other charge for exercise of -rights granted under this License, and you may not initiate litigation -(including a cross-claim or counterclaim in a lawsuit) alleging that -any patent claim is infringed by making, using, selling, offering for -sale, or importing the Program or any portion of it. - - 11. Patents. - - A "contributor" is a copyright holder who authorizes use under this -License of the Program or a work on which the Program is based. The -work thus licensed is called the contributor's "contributor version". - - A contributor's "essential patent claims" are all patent claims -owned or controlled by the contributor, whether already acquired or -hereafter acquired, that would be infringed by some manner, permitted -by this License, of making, using, or selling its contributor version, -but do not include claims that would be infringed only as a -consequence of further modification of the contributor version. For -purposes of this definition, "control" includes the right to grant -patent sublicenses in a manner consistent with the requirements of -this License. - - Each contributor grants you a non-exclusive, worldwide, royalty-free -patent license under the contributor's essential patent claims, to -make, use, sell, offer for sale, import and otherwise run, modify and -propagate the contents of its contributor version. - - In the following three paragraphs, a "patent license" is any express -agreement or commitment, however denominated, not to enforce a patent -(such as an express permission to practice a patent or covenant not to -sue for patent infringement). To "grant" such a patent license to a -party means to make such an agreement or commitment not to enforce a -patent against the party. - - If you convey a covered work, knowingly relying on a patent license, -and the Corresponding Source of the work is not available for anyone -to copy, free of charge and under the terms of this License, through a -publicly available network server or other readily accessible means, -then you must either (1) cause the Corresponding Source to be so -available, or (2) arrange to deprive yourself of the benefit of the -patent license for this particular work, or (3) arrange, in a manner -consistent with the requirements of this License, to extend the patent -license to downstream recipients. "Knowingly relying" means you have -actual knowledge that, but for the patent license, your conveying the -covered work in a country, or your recipient's use of the covered work -in a country, would infringe one or more identifiable patents in that -country that you have reason to believe are valid. - - If, pursuant to or in connection with a single transaction or -arrangement, you convey, or propagate by procuring conveyance of, a -covered work, and grant a patent license to some of the parties -receiving the covered work authorizing them to use, propagate, modify -or convey a specific copy of the covered work, then the patent license -you grant is automatically extended to all recipients of the covered -work and works based on it. - - A patent license is "discriminatory" if it does not include within -the scope of its coverage, prohibits the exercise of, or is -conditioned on the non-exercise of one or more of the rights that are -specifically granted under this License. You may not convey a covered -work if you are a party to an arrangement with a third party that is -in the business of distributing software, under which you make payment -to the third party based on the extent of your activity of conveying -the work, and under which the third party grants, to any of the -parties who would receive the covered work from you, a discriminatory -patent license (a) in connection with copies of the covered work -conveyed by you (or copies made from those copies), or (b) primarily -for and in connection with specific products or compilations that -contain the covered work, unless you entered into that arrangement, -or that patent license was granted, prior to 28 March 2007. - - Nothing in this License shall be construed as excluding or limiting -any implied license or other defenses to infringement that may -otherwise be available to you under applicable patent law. - - 12. No Surrender of Others' Freedom. - - If conditions are imposed on you (whether by court order, agreement or -otherwise) that contradict the conditions of this License, they do not -excuse you from the conditions of this License. If you cannot convey a -covered work so as to satisfy simultaneously your obligations under this -License and any other pertinent obligations, then as a consequence you may -not convey it at all. For example, if you agree to terms that obligate you -to collect a royalty for further conveying from those to whom you convey -the Program, the only way you could satisfy both those terms and this -License would be to refrain entirely from conveying the Program. - - 13. Use with the GNU Affero General Public License. - - Notwithstanding any other provision of this License, you have -permission to link or combine any covered work with a work licensed -under version 3 of the GNU Affero General Public License into a single -combined work, and to convey the resulting work. The terms of this -License will continue to apply to the part which is the covered work, -but the special requirements of the GNU Affero General Public License, -section 13, concerning interaction through a network will apply to the -combination as such. - - 14. Revised Versions of this License. - - The Free Software Foundation may publish revised and/or new versions of -the GNU General Public License from time to time. Such new versions will -be similar in spirit to the present version, but may differ in detail to -address new problems or concerns. - - Each version is given a distinguishing version number. If the -Program specifies that a certain numbered version of the GNU General -Public License "or any later version" applies to it, you have the -option of following the terms and conditions either of that numbered -version or of any later version published by the Free Software -Foundation. If the Program does not specify a version number of the -GNU General Public License, you may choose any version ever published -by the Free Software Foundation. - - If the Program specifies that a proxy can decide which future -versions of the GNU General Public License can be used, that proxy's -public statement of acceptance of a version permanently authorizes you -to choose that version for the Program. - - Later license versions may give you additional or different -permissions. However, no additional obligations are imposed on any -author or copyright holder as a result of your choosing to follow a -later version. - - 15. Disclaimer of Warranty. - - THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY -APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT -HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY -OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, -THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR -PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM -IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF -ALL NECESSARY SERVICING, REPAIR OR CORRECTION. - - 16. Limitation of Liability. - - IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING -WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS -THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY -GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE -USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF -DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD -PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), -EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF -SUCH DAMAGES. - - 17. Interpretation of Sections 15 and 16. - - If the disclaimer of warranty and limitation of liability provided -above cannot be given local legal effect according to their terms, -reviewing courts shall apply local law that most closely approximates -an absolute waiver of all civil liability in connection with the -Program, unless a warranty or assumption of liability accompanies a -copy of the Program in return for a fee. - - END OF TERMS AND CONDITIONS - - How to Apply These Terms to Your New Programs - - If you develop a new program, and you want it to be of the greatest -possible use to the public, the best way to achieve this is to make it -free software which everyone can redistribute and change under these terms. - - To do so, attach the following notices to the program. It is safest -to attach them to the start of each source file to most effectively -state the exclusion of warranty; and each file should have at least -the "copyright" line and a pointer to where the full notice is found. - - <one line to give the program's name and a brief idea of what it does.> - Copyright (C) <year> <name of author> - - This program is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see <http://www.gnu.org/licenses/>. - -Also add information on how to contact you by electronic and paper mail. - - If the program does terminal interaction, make it output a short -notice like this when it starts in an interactive mode: - - <program> Copyright (C) <year> <name of author> - This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'. - This is free software, and you are welcome to redistribute it - under certain conditions; type `show c' for details. - -The hypothetical commands `show w' and `show c' should show the appropriate -parts of the General Public License. Of course, your program's commands -might be different; for a GUI interface, you would use an "about box". - - You should also get your employer (if you work as a programmer) or school, -if any, to sign a "copyright disclaimer" for the program, if necessary. -For more information on this, and how to apply and follow the GNU GPL, see -<http://www.gnu.org/licenses/>. - - The GNU General Public License does not permit incorporating your program -into proprietary programs. If your program is a subroutine library, you -may consider it more useful to permit linking proprietary applications with -the library. If this is what you want to do, use the GNU Lesser General -Public License instead of this License. But first, please read -<http://www.gnu.org/philosophy/why-not-lgpl.html>. diff --git a/payloads/external/SeaBIOS/COPYING.LESSER b/payloads/external/SeaBIOS/COPYING.LESSER deleted file mode 100644 index fc8a5de7..00000000 --- a/payloads/external/SeaBIOS/COPYING.LESSER +++ /dev/null @@ -1,165 +0,0 @@ - GNU LESSER GENERAL PUBLIC LICENSE - Version 3, 29 June 2007 - - Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/> - Everyone is permitted to copy and distribute verbatim copies - of this license document, but changing it is not allowed. - - - This version of the GNU Lesser General Public License incorporates -the terms and conditions of version 3 of the GNU General Public -License, supplemented by the additional permissions listed below. - - 0. Additional Definitions. - - As used herein, "this License" refers to version 3 of the GNU Lesser -General Public License, and the "GNU GPL" refers to version 3 of the GNU -General Public License. - - "The Library" refers to a covered work governed by this License, -other than an Application or a Combined Work as defined below. - - An "Application" is any work that makes use of an interface provided -by the Library, but which is not otherwise based on the Library. -Defining a subclass of a class defined by the Library is deemed a mode -of using an interface provided by the Library. - - A "Combined Work" is a work produced by combining or linking an -Application with the Library. The particular version of the Library -with which the Combined Work was made is also called the "Linked -Version". - - The "Minimal Corresponding Source" for a Combined Work means the -Corresponding Source for the Combined Work, excluding any source code -for portions of the Combined Work that, considered in isolation, are -based on the Application, and not on the Linked Version. - - The "Corresponding Application Code" for a Combined Work means the -object code and/or source code for the Application, including any data -and utility programs needed for reproducing the Combined Work from the -Application, but excluding the System Libraries of the Combined Work. - - 1. Exception to Section 3 of the GNU GPL. - - You may convey a covered work under sections 3 and 4 of this License -without being bound by section 3 of the GNU GPL. - - 2. Conveying Modified Versions. - - If you modify a copy of the Library, and, in your modifications, a -facility refers to a function or data to be supplied by an Application -that uses the facility (other than as an argument passed when the -facility is invoked), then you may convey a copy of the modified -version: - - a) under this License, provided that you make a good faith effort to - ensure that, in the event an Application does not supply the - function or data, the facility still operates, and performs - whatever part of its purpose remains meaningful, or - - b) under the GNU GPL, with none of the additional permissions of - this License applicable to that copy. - - 3. Object Code Incorporating Material from Library Header Files. - - The object code form of an Application may incorporate material from -a header file that is part of the Library. You may convey such object -code under terms of your choice, provided that, if the incorporated -material is not limited to numerical parameters, data structure -layouts and accessors, or small macros, inline functions and templates -(ten or fewer lines in length), you do both of the following: - - a) Give prominent notice with each copy of the object code that the - Library is used in it and that the Library and its use are - covered by this License. - - b) Accompany the object code with a copy of the GNU GPL and this license - document. - - 4. Combined Works. - - You may convey a Combined Work under terms of your choice that, -taken together, effectively do not restrict modification of the -portions of the Library contained in the Combined Work and reverse -engineering for debugging such modifications, if you also do each of -the following: - - a) Give prominent notice with each copy of the Combined Work that - the Library is used in it and that the Library and its use are - covered by this License. - - b) Accompany the Combined Work with a copy of the GNU GPL and this license - document. - - c) For a Combined Work that displays copyright notices during - execution, include the copyright notice for the Library among - these notices, as well as a reference directing the user to the - copies of the GNU GPL and this license document. - - d) Do one of the following: - - 0) Convey the Minimal Corresponding Source under the terms of this - License, and the Corresponding Application Code in a form - suitable for, and under terms that permit, the user to - recombine or relink the Application with a modified version of - the Linked Version to produce a modified Combined Work, in the - manner specified by section 6 of the GNU GPL for conveying - Corresponding Source. - - 1) Use a suitable shared library mechanism for linking with the - Library. A suitable mechanism is one that (a) uses at run time - a copy of the Library already present on the user's computer - system, and (b) will operate properly with a modified version - of the Library that is interface-compatible with the Linked - Version. - - e) Provide Installation Information, but only if you would otherwise - be required to provide such information under section 6 of the - GNU GPL, and only to the extent that such information is - necessary to install and execute a modified version of the - Combined Work produced by recombining or relinking the - Application with a modified version of the Linked Version. (If - you use option 4d0, the Installation Information must accompany - the Minimal Corresponding Source and Corresponding Application - Code. If you use option 4d1, you must provide the Installation - Information in the manner specified by section 6 of the GNU GPL - for conveying Corresponding Source.) - - 5. Combined Libraries. - - You may place library facilities that are a work based on the -Library side by side in a single library together with other library -facilities that are not Applications and are not covered by this -License, and convey such a combined library under terms of your -choice, if you do both of the following: - - a) Accompany the combined library with a copy of the same work based - on the Library, uncombined with any other library facilities, - conveyed under the terms of this License. - - b) Give prominent notice with the combined library that part of it - is a work based on the Library, and explaining where to find the - accompanying uncombined form of the same work. - - 6. Revised Versions of the GNU Lesser General Public License. - - The Free Software Foundation may publish revised and/or new versions -of the GNU Lesser General Public License from time to time. Such new -versions will be similar in spirit to the present version, but may -differ in detail to address new problems or concerns. - - Each version is given a distinguishing version number. If the -Library as you received it specifies that a certain numbered version -of the GNU Lesser General Public License "or any later version" -applies to it, you have the option of following the terms and -conditions either of that published version or of any later version -published by the Free Software Foundation. If the Library as you -received it does not specify a version number of the GNU Lesser -General Public License, you may choose any version of the GNU Lesser -General Public License ever published by the Free Software Foundation. - - If the Library as you received it specifies that a proxy can decide -whether future versions of the GNU Lesser General Public License shall -apply, that proxy's public statement of acceptance of any version is -permanent authorization for you to choose that version for the -Library. diff --git a/payloads/external/SeaBIOS/Kconfig b/payloads/external/SeaBIOS/Kconfig new file mode 100644 index 00000000..9aea2d01 --- /dev/null +++ b/payloads/external/SeaBIOS/Kconfig @@ -0,0 +1,154 @@ +if PAYLOAD_SEABIOS + +choice + prompt "SeaBIOS version" + default SEABIOS_STABLE + +config SEABIOS_STABLE + bool "1.14.0" + help + Stable SeaBIOS version +config SEABIOS_MASTER + bool "master" + help + Newest SeaBIOS version +config SEABIOS_REVISION + bool "git revision" + help + Select this option if you have a specific commit or branch + that you want to use as the revision from which to + build SeaBIOS. + + You will be able to specify the name of a branch or a commit id + later. + +endchoice + +config SEABIOS_REVISION_ID + string "Insert a commit's SHA-1 or a branch name" + depends on SEABIOS_REVISION + default "origin/master" + help + The commit's SHA-1 or branch name of the revision to use. + +config SEABIOS_PS2_TIMEOUT + prompt "PS/2 keyboard controller initialization timeout (milliseconds)" + default 0 + int + help + Some PS/2 keyboard controllers don't respond to commands immediately + after powering on. This specifies how long SeaBIOS will wait for the + keyboard controller to become ready before giving up. + +config SEABIOS_THREAD_OPTIONROMS + prompt "Hardware init during option ROM execution" + default n + bool + help + Allow hardware init to run in parallel with optionrom execution. + + This can reduce boot time, but can cause some timing + variations during option ROM code execution. It is not + known if all option ROMs will behave properly with this option. + +config SEABIOS_HARDWARE_IRQ + prompt "Hardware Interrupts" + default y + bool + help + Program and support hardware interrupts using the i8259 + programmable interrupt controller (PIC). Deselected by + boards which would otherwise hang at the boot menu (eg, + google/rambi). + +config SEABIOS_VGA_COREBOOT + prompt "Include generated option rom that implements legacy VGA BIOS compatibility" + default y if !VENDOR_EMULATION + depends on !VGA_ROM_RUN && (VGA_TEXT_FRAMEBUFFER || LINEAR_FRAMEBUFFER) + bool + help + coreboot can initialize the GPU of some mainboards. + + After initializing the GPU, the information about it can be passed to the payload. + Provide an option rom that implements this legacy VGA BIOS compatibility requirement. + +config PAYLOAD_CONFIGFILE + string "SeaBIOS config file" + default "" + help + This option allows a platform to set Kconfig options for a basic + SeaBIOS payload. In general, if the option is used, the default + would be "$(top)/src/mainboard/$(MAINBOARDDIR)/config_seabios" + +config SEABIOS_BOOTORDER_FILE + string "SeaBIOS bootorder file" + default "" + help + Add a SeaBIOS bootorder file. From the wiki: + "The bootorder file may be used to configure the boot up order. The file + should be ASCII text and contain one line per boot method. The description + of each boot method follows an Open Firmware device path format. SeaBIOS + will attempt to boot from each item in the file - first line of the file + first." + + See: https://www.coreboot.org/SeaBIOS#Configuring_boot_order + + If used, a typical value would be: + $(top)/src/mainboard/$(MAINBOARDDIR)/bootorder + +config SEABIOS_ADD_SERCON_PORT_FILE + prompt "Add SeaBIOS sercon-port file to CBFS" + default n + bool + help + Select this option to enable SeaBIOS' VGA adapter emulation + on serial port. + +config SEABIOS_SERCON_PORT_ADDR + hex "SeaBIOS sercon-port base address" + depends on SEABIOS_ADD_SERCON_PORT_FILE + default TTYS0_BASE + help + Set this field to the IO address of a serial port for SeaBIOS' VGA + adapter emulation. + + By default primary console UART defined by TTYS0_BASE is used. + +config PAYLOAD_FILE + default "payloads/external/SeaBIOS/seabios/out/bios.bin.elf" + +config PAYLOAD_VGABIOS_FILE + string + depends on SEABIOS_VGA_COREBOOT + default "payloads/external/SeaBIOS/seabios/out/vgabios.bin" + +config SEABIOS_DEBUG_LEVEL + int "SeaBIOS debug level (verbosity)" + default -1 + help + The higher the number, the more verbose SeaBIOS will be. See the table + below for the current values corresponding to various items as of SeaBIOS + version 1.10.1. Set this value to -1 to use SeaBIOS' default. + + Output at various SeaBIOS log levels: + level 0 - Logging disabled + level 1 - Basic output, interrupts 5, 18h, 19h, 40h, SMP, PNP, PMM + level 2 - AHCI, Floppy, Basic ps2, interrupts 11h, 12h, 14h, 17h + level 3 - bootsplash, initializations, SeaBIOS VGA BIOS interrupts + level 4 - BIOS tables, more optionrom + level 5 - Extra bootsplash, more XHCI + level 6 - ATA commands, extra optionrom + level 7 - extra ps2 commands, more OHCI & EHCI + level 8 - extra malloc info, more AHCI + level 9 - interrupts 15h, 16h, 1ah, APM, PCI, SMIs, PCIBIOS, + USB-HID commands, SDcard commands, Floppy commands + level 10 - interrupt 13h (Drives other than floppy) + level 20 - interrupt 10h (Display) + +comment "Using default SeaBIOS log level" + depends on SEABIOS_DEBUG_LEVEL = -1 + +comment "SeaBIOS logging disabled" + depends on SEABIOS_DEBUG_LEVEL = 0 + +endif diff --git a/payloads/external/SeaBIOS/Kconfig.name b/payloads/external/SeaBIOS/Kconfig.name new file mode 100644 index 00000000..bb1f30c9 --- /dev/null +++ b/payloads/external/SeaBIOS/Kconfig.name @@ -0,0 +1,9 @@ +config PAYLOAD_SEABIOS + bool "SeaBIOS" + depends on ARCH_X86 + help + Select this option if you want to build a coreboot image + with a SeaBIOS payload. If you don't know what this is + about, just leave it enabled. + + See https://coreboot.org/Payloads for more information. diff --git a/payloads/external/SeaBIOS/Makefile b/payloads/external/SeaBIOS/Makefile index c108f87d..cdcd4267 100644 --- a/payloads/external/SeaBIOS/Makefile +++ b/payloads/external/SeaBIOS/Makefile @@ -1,291 +1,95 @@ -# SeaBIOS build system -# -# Copyright (C) 2008-2012 Kevin O'Connor <kevin@koconnor.net> -# -# This file may be distributed under the terms of the GNU LGPLv3 license. - -# Output directory -OUT=out/ - -# Common command definitions -export HOSTCC := $(CC) -export CONFIG_SHELL := sh -export KCONFIG_AUTOHEADER := autoconf.h -export KCONFIG_CONFIG := $(CURDIR)/.config -export LC_ALL := C -CROSS_PREFIX= -ifneq ($(CROSS_PREFIX),) -CC=$(CROSS_PREFIX)gcc +TAG-$(CONFIG_SEABIOS_MASTER)=origin/master +TAG-$(CONFIG_SEABIOS_STABLE)=155821a1990b6de78dde5f98fa5ab90e802021e0 +TAG-$(CONFIG_SEABIOS_REVISION)=$(CONFIG_SEABIOS_REVISION_ID) + +project_git_repo=https://review.coreboot.org/seabios.git +project_dir=seabios + +unexport KCONFIG_AUTOHEADER +unexport KCONFIG_AUTOCONFIG +unexport KCONFIG_DEPENDENCIES +unexport KCONFIG_SPLITCONFIG +unexport KCONFIG_TRISTATE +unexport KCONFIG_NEGATIVES + +all: build + +seabios: + echo " Cloning SeaBIOS from Git" + git clone $(project_git_repo) $(project_dir) + +fetch: seabios +ifeq ($(TAG-y),) + echo "Error: The specified tag is invalid" +ifeq ($(CONFIG_SEABIOS_REVISION),y) + echo "Error: There is no revision specified for SeaBIOS" + false endif -AS=$(CROSS_PREFIX)as -LD=$(CROSS_PREFIX)ld -OBJCOPY=$(CROSS_PREFIX)objcopy -OBJDUMP=$(CROSS_PREFIX)objdump -STRIP=$(CROSS_PREFIX)strip -PYTHON=python -CPP=cpp -IASL:=iasl -LD32BIT_FLAG:=-melf_i386 - -# Source files -SRCBOTH=misc.c stacks.c output.c string.c block.c cdrom.c disk.c \ - mouse.c kbd.c system.c serial.c sercon.c clock.c resume.c \ - pnpbios.c vgahooks.c pcibios.c apm.c cp437.c hw/pci.c hw/timer.c \ - hw/rtc.c hw/dma.c hw/pic.c hw/ps2port.c hw/serialio.c hw/usb.c \ - hw/usb-uhci.c hw/usb-ohci.c hw/usb-ehci.c hw/usb-hid.c \ - hw/usb-msc.c hw/usb-uas.c hw/blockcmd.c hw/floppy.c hw/ata.c \ - hw/ramdisk.c hw/lsi-scsi.c hw/esp-scsi.c hw/megasas.c \ - hw/mpt-scsi.c -SRC16=$(SRCBOTH) -SRC32FLAT=$(SRCBOTH) post.c e820map.c malloc.c romfile.c x86.c \ - optionroms.c pmm.c font.c boot.c bootsplash.c jpeg.c bmp.c \ - tcgbios.c sha1.c hw/pcidevice.c hw/ahci.c hw/pvscsi.c \ - hw/usb-xhci.c hw/usb-hub.c hw/sdcard.c fw/coreboot.c \ - fw/lzmadecode.c fw/multiboot.c fw/csm.c fw/biostables.c \ - fw/paravirt.c fw/shadow.c fw/pciinit.c fw/smm.c fw/smp.c \ - fw/mtrr.c fw/xen.c fw/acpi.c fw/mptable.c fw/pirtable.c \ - fw/smbios.c fw/romfile_loader.c fw/dsdt_parser.c hw/virtio-ring.c \ - hw/virtio-pci.c hw/virtio-mmio.c hw/virtio-blk.c hw/virtio-scsi.c \ - hw/tpm_drivers.c hw/nvme.c sha256.c sha512.c -SRC32SEG=string.c output.c pcibios.c apm.c stacks.c hw/pci.c hw/serialio.c -DIRS=src src/hw src/fw vgasrc - -# Default compiler flags -cc-option=$(shell if test -z "`$(1) $(2) -S -o /dev/null -xc /dev/null 2>&1`" \ - ; then echo "$(2)"; else echo "$(3)"; fi ;) - -EXTRAVERSION= - -CPPFLAGS = -P -MD -MT $@ - -COMMONCFLAGS := -I$(OUT) -Isrc -Os -MD -g \ - -Wall -Wno-strict-aliasing -Wold-style-definition \ - $(call cc-option,$(CC),-Wtype-limits,) \ - -m32 -march=i386 -mregparm=3 -mpreferred-stack-boundary=2 \ - -minline-all-stringops -fomit-frame-pointer \ - -freg-struct-return -ffreestanding -fno-delete-null-pointer-checks \ - -ffunction-sections -fdata-sections -fno-common -fno-merge-constants -COMMONCFLAGS += $(call cc-option,$(CC),-nopie,) -COMMONCFLAGS += $(call cc-option,$(CC),-fno-pie,) -COMMONCFLAGS += $(call cc-option,$(CC),-fno-stack-protector,) -COMMONCFLAGS += $(call cc-option,$(CC),-fno-stack-protector-all,) -COMMONCFLAGS += $(call cc-option,$(CC),-fstack-check=no,) -COMMONCFLAGS += $(call cc-option,$(CC),-Wno-address-of-packed-member,) -COMMONCFLAGS += $(call cc-option,$(CC),-fcf-protection=none,) -COMMA := , - -CFLAGS32FLAT := $(COMMONCFLAGS) -DMODE16=0 -DMODESEGMENT=0 -CFLAGSSEG := $(COMMONCFLAGS) -DMODESEGMENT=1 -fno-defer-pop \ - $(call cc-option,$(CC),-fno-jump-tables,-DMANUAL_NO_JUMP_TABLE) \ - $(call cc-option,$(CC),-fno-tree-switch-conversion,) -CFLAGS32SEG := $(CFLAGSSEG) -DMODE16=0 -CFLAGS16 := $(CFLAGSSEG) -DMODE16=1 \ - $(call cc-option,$(CC),-m16,-Wa$(COMMA)src/code16gcc.s) \ - $(call cc-option,$(CC),--param large-stack-frame=4,-fno-inline) - -# Run with "make V=1" to see the actual compile commands -ifdef V -Q= + false +endif + cd seabios; git show $(TAG-y) >/dev/null 2>&1 ; if [ $$? -ne 0 ] || \ + [ "$(TAG-y)" = "origin/master" ]; then \ + echo " Fetching new commits from the SeaBIOS git repo"; \ + git fetch; fi + +checkout: fetch + echo " Checking out SeaBIOS revision $(TAG-y)" + cd seabios; git checkout master; git branch -D coreboot 2>/dev/null; git checkout -b coreboot $(TAG-y) + +config: checkout + echo " CONFIG SeaBIOS $(TAG-y)" + echo "CONFIG_COREBOOT=y" > seabios/.config +ifeq ($(CONFIG_CONSOLE_SERIAL)$(CONFIG_DRIVERS_UART_8250IO),yy) + echo "CONFIG_DEBUG_SERIAL=y" >> seabios/.config + echo "CONFIG_DEBUG_SERIAL_PORT=$(CONFIG_TTYS0_BASE)" >> seabios/.config +else ifeq ($(CONFIG_CONSOLE_SERIAL)$(CONFIG_DRIVERS_UART_8250MEM)$(CONFIG_HUDSON_UART),yyy) + echo "CONFIG_DEBUG_SERIAL_MMIO=y" >> seabios/.config + echo "CONFIG_DEBUG_SERIAL_MEM_ADDRESS=0xFEDC6000" >> seabios/.config +else ifeq ($(CONFIG_CONSOLE_SERIAL)$(CONFIG_ENABLE_HSUART),yy) + echo "CONFIG_DEBUG_SERIAL_MMIO=y" >> seabios/.config + echo "CONFIG_DEBUG_SERIAL_MEM_ADDRESS=$(CONFIG_CONSOLE_UART_BASE_ADDRESS)" >> seabios/.config +else ifeq ($(CONFIG_CONSOLE_SERIAL)$(CONFIG_DRIVERS_UART_8250MEM_32),yy) + echo "CONFIG_DEBUG_SERIAL_MMIO=y" >> seabios/.config + echo "CONFIG_DEBUG_SERIAL_MEM_ADDRESS=$(CONFIG_CONSOLE_UART_BASE_ADDRESS)" >> seabios/.config else -Q=@ -MAKEFLAGS += --no-print-directory + echo "# CONFIG_DEBUG_SERIAL is not set" >> seabios/.config endif - -# Default targets --include $(KCONFIG_CONFIG) - -target-y := -target-$(CONFIG_QEMU) += $(OUT)bios.bin -target-$(CONFIG_CSM) += $(OUT)Csm16.bin -target-$(CONFIG_COREBOOT) += $(OUT)bios.bin.elf -target-$(CONFIG_BUILD_VGABIOS) += $(OUT)vgabios.bin - -all: $(target-y) - -# Make definitions -.PHONY : all clean distclean FORCE -.DELETE_ON_ERROR: - - -################ Common build rules - -# Verify the build environment works. -TESTGCC:=$(shell OUT="$(OUT)" CC="$(CC)" LD="$(LD)" IASL="$(IASL)" scripts/test-build.sh) -ifeq "$(TESTGCC)" "-1" -$(error "Please upgrade the build environment") +ifneq ($(CONFIG_SEABIOS_THREAD_OPTIONROMS),y) + echo "# CONFIG_THREAD_OPTIONROMS is not set" >> seabios/.config endif - -ifeq "$(TESTGCC)" "0" -# Use -fwhole-program -CFLAGSWHOLE=-fwhole-program -DWHOLE_PROGRAM +ifeq ($(CONFIG_SEABIOS_VGA_COREBOOT),y) + echo "CONFIG_VGA_COREBOOT=y" >> seabios/.config + echo "CONFIG_BUILD_VGABIOS=y" >> seabios/.config endif - -# Do a whole file compile by textually including all C code. -define whole-compile -@echo " Compiling whole program $3" -$(Q)printf '$(foreach i,$2,#include "$i"\n)' > $3.tmp.c -$(Q)$(CC) -I. $1 $(CFLAGSWHOLE) -c $3.tmp.c -o $3 -endef - -%.noexec.o: %.o - @echo " Stripping $@" - $(Q)$(STRIP) $< -o $<.strip.o - $(Q)$(PYTHON) ./scripts/ldnoexec.py $<.strip.o $@ - -$(OUT)%.s: %.c - @echo " Compiling to assembler $@" - $(Q)$(CC) $(CFLAGS16) -S -c $< -o $@ - -$(OUT)%.o: %.c $(OUT)autoconf.h - @echo " Compile checking $@" - $(Q)$(CC) $(CFLAGS32FLAT) -c $< -o $@ - -$(OUT)%.lds: %.lds.S - @echo " Precompiling $@" - $(Q)$(CPP) $(CPPFLAGS) -D__ASSEMBLY__ $< -o $@ - - -################ Main BIOS build rules - -$(OUT)asm-offsets.s: $(OUT)autoconf.h - -$(OUT)asm-offsets.h: $(OUT)src/asm-offsets.s - @echo " Generating offset file $@" - $(Q)./scripts/gen-offsets.sh $< $@ - -$(OUT)ccode16.o: $(OUT)autoconf.h $(patsubst %.c, $(OUT)src/%.o,$(SRC16)) ; $(call whole-compile, $(CFLAGS16), $(addprefix src/, $(SRC16)),$@) - -$(OUT)code32seg.o: $(OUT)autoconf.h $(patsubst %.c, $(OUT)src/%.o,$(SRC32SEG)) ; $(call whole-compile, $(CFLAGS32SEG), $(addprefix src/, $(SRC32SEG)),$@) - -$(OUT)ccode32flat.o: $(OUT)autoconf.h $(patsubst %.c, $(OUT)src/%.o,$(SRC32FLAT)) ; $(call whole-compile, $(CFLAGS32FLAT), $(addprefix src/, $(SRC32FLAT)),$@) - -$(OUT)romlayout.o: src/romlayout.S $(OUT)autoconf.h $(OUT)asm-offsets.h - @echo " Compiling (16bit) $@" - $(Q)$(CC) $(CFLAGS16) -c -D__ASSEMBLY__ $< -o $@ - -$(OUT)romlayout16.lds: $(OUT)ccode32flat.o $(OUT)code32seg.o $(OUT)ccode16.o $(OUT)romlayout.o src/version.c scripts/layoutrom.py scripts/buildversion.py - @echo " Building ld scripts" - $(Q)$(PYTHON) ./scripts/buildversion.py -e "$(EXTRAVERSION)" -t "$(CC);$(AS);$(LD);$(OBJCOPY);$(OBJDUMP);$(STRIP)" $(OUT)autoversion.h - $(Q)$(CC) $(CFLAGS32FLAT) -c src/version.c -o $(OUT)version.o - $(Q)$(LD) $(LD32BIT_FLAG) -r $(OUT)ccode32flat.o $(OUT)version.o -o $(OUT)code32flat.o - $(Q)$(LD) $(LD32BIT_FLAG) -r $(OUT)ccode16.o $(OUT)romlayout.o -o $(OUT)code16.o - $(Q)$(OBJDUMP) -thr $(OUT)code32flat.o > $(OUT)code32flat.o.objdump - $(Q)$(OBJDUMP) -thr $(OUT)code32seg.o > $(OUT)code32seg.o.objdump - $(Q)$(OBJDUMP) -thr $(OUT)code16.o > $(OUT)code16.o.objdump - $(Q)$(PYTHON) ./scripts/layoutrom.py $(OUT)code16.o.objdump $(OUT)code32seg.o.objdump $(OUT)code32flat.o.objdump $(OUT)$(KCONFIG_AUTOHEADER) $(OUT)romlayout16.lds $(OUT)romlayout32seg.lds $(OUT)romlayout32flat.lds - -# These are actually built by scripts/layoutrom.py above, but by pulling them -# into an extra rule we prevent make -j from spawning layoutrom.py 4 times. -$(OUT)romlayout32seg.lds $(OUT)romlayout32flat.lds $(OUT)code32flat.o $(OUT)code16.o: $(OUT)romlayout16.lds - -$(OUT)rom16.o: $(OUT)code16.o $(OUT)romlayout16.lds - @echo " Linking $@" - $(Q)$(LD) -T $(OUT)romlayout16.lds $< -o $@ - -$(OUT)rom32seg.o: $(OUT)code32seg.o $(OUT)romlayout32seg.lds - @echo " Linking $@" - $(Q)$(LD) -T $(OUT)romlayout32seg.lds $< -o $@ - -$(OUT)rom.o: $(OUT)rom16.noexec.o $(OUT)rom32seg.noexec.o $(OUT)code32flat.o $(OUT)romlayout32flat.lds - @echo " Linking $@" - $(Q)$(LD) -N -T $(OUT)romlayout32flat.lds $(OUT)rom16.noexec.o $(OUT)rom32seg.noexec.o $(OUT)code32flat.o -o $@ - -$(OUT)bios.bin.prep: $(OUT)rom.o scripts/checkrom.py - @echo " Prepping $@" - $(Q)rm -f $(OUT)bios.bin $(OUT)Csm16.bin $(OUT)bios.bin.elf - $(Q)$(OBJDUMP) -thr $< > $<.objdump - $(Q)$(OBJCOPY) -O binary $< $(OUT)bios.bin.raw - $(Q)$(PYTHON) ./scripts/checkrom.py $<.objdump $(CONFIG_ROM_SIZE) $(OUT)bios.bin.raw $(OUT)bios.bin.prep - -$(OUT)bios.bin: $(OUT)bios.bin.prep - @echo " Creating $@" - $(Q)cp $< $@ - -$(OUT)Csm16.bin: $(OUT)bios.bin.prep - @echo " Creating $@" - $(Q)cp $< $@ - -$(OUT)bios.bin.elf: $(OUT)rom.o $(OUT)bios.bin.prep - @echo " Creating $@" - $(Q)$(STRIP) -R .comment $< -o $(OUT)bios.bin.elf - - -################ VGA build rules - -# VGA src files -SRCVGA=src/output.c src/string.c src/hw/pci.c src/hw/serialio.c \ - vgasrc/vgainit.c vgasrc/vgabios.c vgasrc/vgafb.c vgasrc/swcursor.c \ - vgasrc/vgafonts.c vgasrc/vbe.c \ - vgasrc/stdvga.c vgasrc/stdvgamodes.c vgasrc/stdvgaio.c \ - vgasrc/clext.c vgasrc/svgamodes.c vgasrc/atiext.c vgasrc/bochsvga.c vgasrc/geodevga.c \ - src/fw/coreboot.c vgasrc/cbvga.c vgasrc/bochsdisplay.c vgasrc/ramfb.c - -ifeq "$(CONFIG_VGA_FIXUP_ASM)" "y" -$(OUT)vgaccode16.raw.s: $(OUT)autoconf.h $(patsubst %.c, $(OUT)%.o,$(SRCVGA)) ; $(call whole-compile, $(filter-out -fomit-frame-pointer,$(CFLAGS16)) -fno-omit-frame-pointer -S -Isrc, $(SRCVGA),$@) - -$(OUT)vgaccode16.o: $(OUT)vgaccode16.raw.s scripts/vgafixup.py - @echo " Fixup VGA rom assembler" - $(Q)$(PYTHON) ./scripts/vgafixup.py $< $(OUT)vgaccode16.s - $(Q)$(AS) --32 src/code16gcc.s $(OUT)vgaccode16.s -o $@ +ifneq ($(CONFIG_PAYLOAD_CONFIGFILE),) +ifneq ("$(wildcard $(CONFIG_PAYLOAD_CONFIGFILE))","") + cat $(CONFIG_PAYLOAD_CONFIGFILE) >> seabios/.config else -$(OUT)vgaccode16.o: $(OUT)autoconf.h $(patsubst %.c, $(OUT)%.o,$(SRCVGA)) ; $(call whole-compile, $(CFLAGS16) -Isrc, $(SRCVGA),$@) + echo "Error: File $(CONFIG_PAYLOAD_CONFIGFILE) does not exist" + false endif +endif +ifneq ($(CONFIG_SEABIOS_DEBUG_LEVEL),-1) + echo "CONFIG_DEBUG_LEVEL=$(CONFIG_SEABIOS_DEBUG_LEVEL)" >> seabios/.config +endif +ifneq ($(CONFIG_SEABIOS_HARDWARE_IRQ),y) + echo "# CONFIG_HARDWARE_IRQ is not set" >> seabios/.config +endif +# This shows how to force a previously set .config option *off* +# echo "# CONFIG_SMBIOS is not set" >> seabios/.config + $(MAKE) -C seabios olddefconfig OUT=out/ -$(OUT)vgaentry.o: vgasrc/vgaentry.S $(OUT)autoconf.h $(OUT)asm-offsets.h - @echo " Compiling (16bit) $@" - $(Q)$(CC) $(CFLAGS16) -c -D__ASSEMBLY__ $< -o $@ - -$(OUT)vgarom.o: $(OUT)vgaccode16.o $(OUT)vgaentry.o $(OUT)vgasrc/vgalayout.lds vgasrc/vgaversion.c scripts/buildversion.py - @echo " Linking $@" - $(Q)$(PYTHON) ./scripts/buildversion.py -e "$(EXTRAVERSION)" -t "$(CC);$(AS);$(LD);$(OBJCOPY);$(OBJDUMP);$(STRIP)" $(OUT)autovgaversion.h - $(Q)$(CC) $(CFLAGS16) -c vgasrc/vgaversion.c -o $(OUT)vgaversion.o - $(Q)$(LD) --gc-sections -T $(OUT)vgasrc/vgalayout.lds $(OUT)vgaccode16.o $(OUT)vgaentry.o $(OUT)vgaversion.o -o $@ - -$(OUT)vgabios.bin.raw: $(OUT)vgarom.o - @echo " Extracting binary $@" - $(Q)$(OBJCOPY) -O binary $< $@ - -$(OUT)vgabios.bin: $(OUT)vgabios.bin.raw scripts/buildrom.py - @echo " Finalizing rom $@" - $(Q)$(PYTHON) ./scripts/buildrom.py $< $@ - - -################ DSDT build rules - -iasl-option=$(shell if test -z "`$(1) $(2) 2>&1 > /dev/null`" \ - ; then echo "$(2)"; else echo "$(3)"; fi ;) - -%.hex: %.dsl ./scripts/acpi_extract_preprocess.py ./scripts/acpi_extract.py - @echo " Compiling IASL $@" - $(Q)$(CPP) $(CPPFLAGS) $< -o $(OUT)$*.dsl.i.orig - $(Q)$(PYTHON) ./scripts/acpi_extract_preprocess.py $(OUT)$*.dsl.i.orig > $(OUT)$*.dsl.i - $(Q)$(IASL) $(call iasl-option,$(IASL),-Pn,) -vs -l -tc -p $(OUT)$* $(OUT)$*.dsl.i - $(Q)$(PYTHON) ./scripts/acpi_extract.py $(OUT)$*.lst > $(OUT)$*.off - $(Q)cat $(OUT)$*.off > $@ - -iasl: src/fw/acpi-dsdt.hex src/fw/ssdt-proc.hex src/fw/ssdt-pcihp.hex src/fw/ssdt-misc.hex - -################ Kconfig rules - -define do-kconfig -$(Q)mkdir -p $(OUT)/scripts/kconfig/lxdialog -$(Q)mkdir -p $(OUT)/include/config -$(Q)mkdir -p $(addprefix $(OUT), $(DIRS)) -$(Q)$(MAKE) -C $(OUT) -f $(CURDIR)/scripts/kconfig/Makefile srctree=$(CURDIR) src=scripts/kconfig obj=scripts/kconfig Q=$(Q) Kconfig=$(CURDIR)/src/Kconfig $1 -endef - -$(OUT)autoconf.h : $(KCONFIG_CONFIG) ; $(call do-kconfig, silentoldconfig) -$(KCONFIG_CONFIG): src/Kconfig vgasrc/Kconfig ; $(call do-kconfig, olddefconfig) -%onfig: ; $(call do-kconfig, $@) -help: ; $(call do-kconfig, $@) - - -################ Generic rules +build: config + echo " MAKE SeaBIOS $(TAG-y)" + $(MAKE) -C seabios OUT=out/ clean: - $(Q)rm -rf $(OUT) + test -d seabios/out && rm -rf seabios/out || exit 0 + +distclean: + rm -rf seabios -distclean: clean - $(Q)rm -f .config .config.old +print-repo-info: + echo "$(project_git_repo) $(project_dir)" --include $(OUT)*.d $(patsubst %,$(OUT)%/*.d,$(DIRS)) +.PHONY: checkout config build clean distclean clone fetch print-repo-info diff --git a/payloads/external/SeaBIOS/README b/payloads/external/SeaBIOS/README deleted file mode 100644 index e18be16f..00000000 --- a/payloads/external/SeaBIOS/README +++ /dev/null @@ -1,17 +0,0 @@ -Welcome to the SeaBIOS project! This project implements an X86 legacy -bios that is built with standard GNU tools. - -Please see build and developer information at: - - http://seabios.org/Developer_Documentation - -For the impatient, SeaBIOS is built for QEMU and tested on QEMU with: - - make - qemu -bios out/bios.bin - -SeaBIOS can be configured with kconfig. To change the default -configuration one can run "make menuconfig" prior to running "make". - -For other types of builds, and for more detailed developer -documentation, please see the online documentation listed above. diff --git a/payloads/external/SeaBIOS/docs/Build_overview.md b/payloads/external/SeaBIOS/docs/Build_overview.md deleted file mode 100644 index 8c6b2f45..00000000 --- a/payloads/external/SeaBIOS/docs/Build_overview.md +++ /dev/null @@ -1,104 +0,0 @@ -The SeaBIOS code can be built using standard GNU tools. A recent Linux -distribution should be able to build SeaBIOS using the standard -compiler tools. - -Building SeaBIOS -================ - -First, [obtain the code](Download). SeaBIOS can be compiled for -several different build targets. It is also possible to configure -additional compile time options - run **make menuconfig** to do this. - -Build for QEMU (along with KVM, Xen, and Bochs) ------------------------------------------------ - -To build for QEMU (and similar), one should be able to run "make" in -the main directory. The resulting file "out/bios.bin" contains the -processed bios image. - -One can use the resulting binary with QEMU by using QEMU's "-bios" -option. For example: - -`qemu -bios out/bios.bin -fda myfdimage.img` - -One can also use the resulting binary with Bochs. For example: - -`bochs -q 'floppya: 1_44=myfdimage.img' 'romimage: file=out/bios.bin'` - -Build for coreboot ------------------- - -To build for coreboot please see the coreboot build instructions at: -<http://www.coreboot.org/SeaBIOS> - -Build as a UEFI Compatibility Support Module (CSM) --------------------------------------------------- - -To build as a CSM, first run kconfig (make menuconfig) and enable -CONFIG_CSM. Then build SeaBIOS (make) - the resulting binary will be -in "out/Csm16.bin". - -This binary may be used with the OMVF/EDK-II UEFI firmware. It will -provide "legacy" BIOS services for booting non-EFI operating systems -and will also allow OVMF to display on otherwise unsupported video -hardware by using the traditional VGA BIOS. (Windows 2008r2 is known -to use INT 10h BIOS calls even when booted via EFI, and the presence -of a CSM makes this work as expected too.) - -Having built SeaBIOS with CONFIG_CSM, one should be able to drop the -result (out/Csm16.bin) into an OVMF build tree at -OvmfPkg/Csm/Csm16/Csm16.bin and then build OVMF with 'build -D -CSM_ENABLE'. The SeaBIOS binary will be included as a discrete file -within the 'Flash Volume' which is created, and there are tools which -will extract it and allow it to be replaced. - -Distribution builds -=================== - -If one is building a binary version of SeaBIOS as part of a package -(such as an rpm) or for wide distribution, please provide the -EXTRAVERSION field during the build. For example: - -`make EXTRAVERSION="-${RPM_PACKAGE_RELEASE}"` - -The EXTRAVERSION field should provide the package version (if -applicable) and the name of the distribution (if that's not already -obvious from the package version). This string will be appended to the -main SeaBIOS version. The above information helps SeaBIOS developers -correlate defect reports to the source code and build environment. - -If one is building a binary in a build environment that does not have -access to the git tool or does not have the full SeaBIOS git repo -available, then please use an official SeaBIOS release tar file as -source. If building from a snapshot (where there is no official -SeaBIOS tar) then one should generate a snapshot tar file on a machine -that does support git using the scripts/tarball.sh tool. For example: - -`scripts/tarball.sh` - -The tarball.sh script encodes version information in the resulting tar -file which the build can extract and include in the final binary. The -above EXTRAVERSION field should still be set when building from a tar. - -Overview of files in the repository -=================================== - -The **src/** directory contains the main bios source code. The -**src/hw/** directory contains source code specific to hardware -drivers. The **src/fw/** directory contains source code for platform -firmware initialization. The **src/std/** directory contains header -files describing standard bios, firmware, and hardware interfaces. - -The **vgasrc/** directory contains code for [SeaVGABIOS](SeaVGABIOS). - -The **scripts/** directory contains helper utilities for manipulating -and building the final roms. - -The **out/** directory is created by the build process - it contains -all intermediate and final files. - -When reading the C code be aware that code that runs in 16bit mode can -not arbitrarily access non-stack memory - see [Memory Model](Memory -Model) for more details. For information on the major C code functions -and where code execution starts see [Execution and code -flow](Execution and code flow). diff --git a/payloads/external/SeaBIOS/docs/Contributing.md b/payloads/external/SeaBIOS/docs/Contributing.md deleted file mode 100644 index e5d55b9b..00000000 --- a/payloads/external/SeaBIOS/docs/Contributing.md +++ /dev/null @@ -1,25 +0,0 @@ -SeaBIOS welcomes contributions of code (either fixing bugs or adding -new functionality). At a high level, the process to contribute a -change is: - -1. [Obtain](Download) the current code and documentation -2. Enhance and test the code locally -3. Submit changes to the SeaBIOS [mailing list](Mailinglist) as a - patch -4. Receive feedback, answer questions, and possibly provide updated - patches -5. When accepted, a maintainer (Kevin O'Connor or Gerd Hoffman) will - commit the change to the master SeaBIOS repository - -The SeaBIOS patch submission process is similar to the -[QEMU process](http://wiki.qemu.org/Contribute/SubmitAPatch). Please -review the QEMU process for more details and tips on the best way to -submit patches. The SeaBIOS C code does follow a slightly different -coding style from QEMU (eg, mixed code and C99 style variable -declarations are encouraged, braces are not required around single -statement blocks), however patches in the QEMU style are acceptable. - -As with QEMU, commits must contain a "Signed-off-by" line using your -real name (sorry, no pseudonyms or anonymous contributions) and a -current email address. It indicates agreement with the terms of the -[developer certificate of origin](developer-certificate-of-origin). diff --git a/payloads/external/SeaBIOS/docs/Debugging.md b/payloads/external/SeaBIOS/docs/Debugging.md deleted file mode 100644 index 13cee4dc..00000000 --- a/payloads/external/SeaBIOS/docs/Debugging.md +++ /dev/null @@ -1,111 +0,0 @@ -This page describes the process of obtaining diagnostic information -from SeaBIOS and for reporting problems. - -Diagnostic information -====================== - -SeaBIOS has the ability to output diagnostic messages. This is -implemented in the code via calls to the "dprintf()" C function. - -On QEMU these messages are written to a special debug port. One can -view these messages by adding '-chardev stdio,id=seabios -device -isa-debugcon,iobase=0x402,chardev=seabios' to the QEMU command line. -Once this is done, one should see status messages on the console. - -On coreboot these messages are generally written to the "cbmem" -console (CONFIG_DEBUG_COREBOOT). If SeaBIOS launches a Linux operating -system, one can obtain the cbmem tool from the coreboot repository and -run "cbmem -c" to view the SeaBIOS diagnostic messages. - -Additionally, if a serial port is available, one may compile SeaBIOS -to send the diagnostic messages to the serial port. See the SeaBIOS -CONFIG_DEBUG_SERIAL option. - -Trouble reporting -================= - -If you are experiencing problems with SeaBIOS, it's useful to increase -the debugging level. This is done by running "make menuconfig" and -setting CONFIG_DEBUG_LEVEL to a higher value. A debug level of 8 will -show a lot of diagnostic information without flooding the serial port -(levels above 8 will frequently cause too much data). - -To report an issue, please collect the serial boot log with SeaBIOS -set to a debug level of 8 and forward the full log along with a -description of the problem to the SeaBIOS [mailing list](Mailinglist). - -Timing debug messages -===================== - -The SeaBIOS repository has a tool (**scripts/readserial.py**) that can -timestamp each diagnostic message produced. The timestamps can provide -some additional information on how long internal processes take. It -also provides a simple profiling mechanism. - -The tool can be used on coreboot builds that have diagnostic messages -sent to a serial port. Make sure SeaBIOS is configured with -CONFIG_DEBUG_SERIAL and run the following on the host receiving serial -output: - -`/path/to/seabios/scripts/readserial.py /dev/ttyS0 115200` - -Update the above command with the appropriate serial device and baud -rate. - -The tool can also timestamp the messages from the QEMU debug port. To -use with QEMU run the following: - -``` -mkfifo qemudebugpipe -qemu -chardev pipe,path=qemudebugpipe,id=seabios -device isa-debugcon,iobase=0x402,chardev=seabios ... -``` - -And then in another session: - -`/path/to/seabios/scripts/readserial.py -nf qemudebugpipe` - -The mkfifo command only needs to be run once to create the pipe file. - -When readserial.py is running, it shows a timestamp with millisecond -precision of the amount of time since the start of the log. If one -presses the "enter" key in the readserial.py session it will add a -blank line to the screen and also reset the time back to zero. The -readserial.py program also keeps a log of all output in files that -look like "seriallog-YYYYMMDD_HHMMSS.log". - -Debugging with gdb on QEMU -========================== - -One can use gdb with QEMU to debug system images. To do this, add '-s --S' to the QEMU command line. For example: - -`qemu -bios out/bios.bin -fda myfdimage.img -s -S` - -Then, in another session, run gdb with either out/rom16.o (to debug -bios 16bit code) or out/rom.o (to debug bios 32bit code). For example: - -`gdb out/rom16.o` - -Once in gdb, use the command `target remote localhost:1234` to have -gdb connect to QEMU. See the QEMU documentation for more information -on using gdb and QEMU in this mode. - -When debugging 16bit code it is necessary to load the 16bit symbols -twice in order for gdb to properly handle break points. To do this, -run the following command `objcopy --adjust-vma 0xf0000 out/rom16.o -rom16offset.o` and then run the following in gdb: - -``` -set architecture i8086 -add-symbol-file rom16offset.o 0 -``` - -To debug a VGA BIOS image, run `gdb out/vgarom.o`, create a -vgaromoffset.o file with offset 0xc0000, add use the gdb -command `add-symbol-file out/vgaromoffset.o 0` to load the 16bit VGA -BIOS symbols twice. - -If debugging the 32bit SeaBIOS initialization code with gdb, note that -SeaBIOS does self relocation by default. This relocation will alter -the location of initialization code symbols. Disable -CONFIG_RELOCATE_INIT to prevent SeaBIOS from doing this. diff --git a/payloads/external/SeaBIOS/docs/Developer_Documentation.md b/payloads/external/SeaBIOS/docs/Developer_Documentation.md deleted file mode 100644 index 24bf48a3..00000000 --- a/payloads/external/SeaBIOS/docs/Developer_Documentation.md +++ /dev/null @@ -1,25 +0,0 @@ -This page is intended for developers interested in understanding and -enhancing SeaBIOS. Please also consider joining the [mailing -list](Mailinglist). - -The SeaBIOS code can be obtained via the [download](Download) -page. For specific information on building SeaBIOS for coreboot, -please see the [coreboot SeaBIOS](http://www.coreboot.org/SeaBIOS) -page. - -See details on [building SeaBIOS](Build overview). - -There is also information on the SeaBIOS [Memory Model](Memory Model). -Along with information on SeaBIOS [Execution and code flow](Execution -and code flow). A description of the process of linking the final -SeaBIOS binary is available at [Linking overview](Linking overview). - -The list of available runtime configuration items is at -[runtime config](Runtime_config). - -To debug SeaBIOS and report problems see SeaBIOS -[debugging](Debugging). To contribute changes to SeaBIOS see -[contributing](Contributing). - -Useful links to specifications is available at [Developer -links](Developer links). diff --git a/payloads/external/SeaBIOS/docs/Developer_links.md b/payloads/external/SeaBIOS/docs/Developer_links.md deleted file mode 100644 index 67a047e4..00000000 --- a/payloads/external/SeaBIOS/docs/Developer_links.md +++ /dev/null @@ -1,86 +0,0 @@ -Links to pages with more information. - -BIOS interfaces -=============== - -Ralf Brown's interrupt list - -* <http://www.cs.cmu.edu/~ralf/files.html> - -Memory layout info - -* <http://stanislavs.org/helppc/bios_data_area.html> - -Old PNP BIOS spec - -* <ftp://download.intel.com/support/motherboards/desktop/sb/pnpbiosspecificationv10a.pdf> - -T13 BIOS Enhanced Disk Drive (drafts): - -* <http://www.t10.org/t13/#Project_drafts> - -Exported BIOS tables -==================== - -ACPI spec - -* <http://www.acpi.info/> - -PCI IRQ Routing Table Specification - -* <http://www.microsoft.com/whdc/archive/pciirq.mspx> - -MP configuration table - -* <http://www.intel.com/design/pentium/datashts/242016.htm> - -SM BIOS (aka DMI): - -* <http://www.dmtf.org/standards/smbios/> - -Hardware information -==================== - -info on PIC - -* <http://www.beyondlogic.org/interrupts/interupt.htm> - -info on kbd - -* <http://www.computer-engineering.org/ps2protocol/> - -info on vga - -* <http://www.osdever.net/FreeVGA/home.htm> - -info on lpt - -* <http://www.beyondlogic.org/spp/parallel.htm> - -info on floppy - -* <http://www.isdaman.com/alsos/hardware/fdc/floppy.htm> - -info on ata - -* <http://ata.wiki.kernel.org/index.php/Developer_Resources> -* <http://www.t10.org/t13/#Project_drafts> - -info on serial - -* <http://www.national.com/ds/PC/PC16550D.pdf> - -General information -=================== - -Bochs tech document list - -* <http://bochs.sourceforge.net/techdata.html> - -Phoenix documents - -* <http://www.phoenix.com/en/Customer+Services/White+Papers-Specs/PC+Industry+Specifications.htm> - -Dosemu information - -* <http://www.dosemu.org/docs/README-tech> diff --git a/payloads/external/SeaBIOS/docs/Download.md b/payloads/external/SeaBIOS/docs/Download.md deleted file mode 100644 index 861e6d57..00000000 --- a/payloads/external/SeaBIOS/docs/Download.md +++ /dev/null @@ -1,27 +0,0 @@ -SeaBIOS may be distributed under the terms of the [GNU -LGPLv3](https://www.gnu.org/licenses/lgpl-3.0-standalone.html) license. -Both source code and binaries are available. - -Latest source code -================== - -The SeaBIOS project uses the [git](https://git-scm.com/) revision -control system. To download the latest source from revision control, -run: - -``` -$ git clone https://git.seabios.org/seabios.git -$ cd seabios -``` - -There's also a [website](http://git.seabios.org/) to browse the latest -source code online. - -Released versions -================= - -Released versions of the source code are available at: - -<https://www.seabios.org/downloads/> - -Please see [releases](Releases) for information on each release. diff --git a/payloads/external/SeaBIOS/docs/Execution_and_code_flow.md b/payloads/external/SeaBIOS/docs/Execution_and_code_flow.md deleted file mode 100644 index 4a7ba8d9..00000000 --- a/payloads/external/SeaBIOS/docs/Execution_and_code_flow.md +++ /dev/null @@ -1,178 +0,0 @@ -This page provides a high-level description of some of the major code -phases that SeaBIOS transitions through and general information on -overall code flow. - -SeaBIOS code phases -=================== - -The SeaBIOS code goes through a few distinct code phases during its -execution lifecycle. Understanding these code phases can help when -reading and enhancing the code. - -POST phase ----------- - -The Power On Self Test (POST) phase is the initialization phase of the -BIOS. This phase is entered when SeaBIOS first starts execution. The -goal of the phase is to initialize internal state, initialize external -interfaces, detect and setup hardware, and to then start the boot -phase. - -On emulators, this phase starts when the CPU starts execution in 16bit -mode at 0xFFFF0000:FFF0. The emulators map the SeaBIOS binary to this -address, and SeaBIOS arranges for romlayout.S:reset_vector() to be -present there. This code calls romlayout.S:entry_post() which then -calls post.c:handle_post() in 32bit mode. - -On coreboot, the build arranges for romlayout.S:entry_elf() to be -called in 32bit mode. This then calls post.c:handle_post(). - -On CSM, the build arranges for romlayout.S:entry_csm() to be called -(in 16bit mode). This then calls csm.c:handle_csm() in 32bit mode. -Unlike on the emulators and coreboot, the SeaBIOS CSM POST phase is -orchestrated with UEFI and there are several calls back and forth -between SeaBIOS and UEFI via handle_csm() throughout the POST -process. - -The POST phase itself has several sub-phases. - -* The "preinit" sub-phase: code run prior to [code relocation](Linking overview#Code relocation). -* The "init" sub-phase: code to initialize internal variables and - interfaces. -* The "setup" sub-phase: code to setup hardware and drivers. -* The "prepboot" sub-phase: code to finalize interfaces and prepare - for the boot phase. - -At completion of the POST phase, SeaBIOS invokes an "int 0x19" -software interrupt in 16bit mode which begins the boot phase. - -Boot phase ----------- - -The goal of the boot phase is to load the first portion of the -operating system's boot loader into memory and start execution of that -boot loader. This phase starts when a software interrupt ("int 0x19" -or "int 0x18") is invoked. The code flow starts in 16bit mode in -romlayout.S:entry_19() or romlayout.S:entry_18() which then -transition to 32bit mode and call boot.c:handle_19() or -boot.c:handle_18(). - -The boot phase is technically also part of the "runtime" phase of -SeaBIOS. It is typically invoked immediately after the POST phase, -but it can also be invoked by an operating system or be invoked -multiple times in an attempt to find a valid boot media. Although the -boot phase C code runs in 32bit mode it does not have write access to -the 0x0f0000-0x100000 memory region and can not call the various -malloc_X() calls. See [Memory Model](Memory Model) for -more information. - -Main runtime phase ------------------- - -The main runtime phase occurs after the boot phase starts the -operating system. Once in this phase, the SeaBIOS code may be invoked -by the operating system using various 16bit and 32bit calls. The goal -of this phase is to support these legacy calling interfaces and to -provide compatibility with BIOS standards. There are multiple entry -points for the BIOS - see the entry_XXX() assembler functions in -romlayout.S. - -Callers use most of these legacy entry points by setting up a -particular CPU register state, invoking the BIOS, and then inspecting -the returned CPU register state. To handle this, SeaBIOS will backup -the current register state into a "struct bregs" (see romlayout.S, -entryfuncs.S, and bregs.h) on call entry and then pass this struct to -the C code. The C code can then inspect the register state and modify -it. The assembler entry functions will then restore the (possibly -modified) register state from the "struct bregs" on return to the -caller. - -Resume and reboot ------------------ - -As noted above, on emulators SeaBIOS handles the 0xFFFF0000:FFF0 -machine startup execution vector. This vector is also called on -machine faults and on some machine "resume" events. It can also be -called (as 0xF0000:FFF0) by software as a request to reboot the -machine (on emulators, coreboot, and CSM). - -The SeaBIOS "resume and reboot" code handles these calls and attempts -to determine the desired action of the caller. Code flow starts in -16bit mode in romlayout.S:reset_vector() which calls -romlayout.S:entry_post() which calls romlayout.S:entry_resume() which -calls resume.c:handle_resume(). Depending on the request the -handle_resume() code may transition to 32bit mode. - -Technically this code is part of the "runtime" phase, so even though -parts of it run in 32bit mode it still has the same limitations of the -runtime phase. - -Threads -======= - -Internally SeaBIOS implements a simple cooperative multi-tasking -system. The system works by giving each "thread" its own stack, and -the system round-robins between these stacks whenever a thread issues -a yield() call. This "threading" system may be more appropriately -described as [coroutines](http://en.wikipedia.org/wiki/Coroutine). -These "threads" do not run on multiple CPUs and are not preempted, so -atomic memory accesses and complex locking is not required. - -The goal of these threads is to reduce overall boot time by -parallelizing hardware delays. (For example, by allowing the wait for -an ATA hard drive to spin-up and respond to commands to occur in -parallel with the wait for a PS/2 keyboard to respond to a setup -command.) These hardware setup threads are only available during the -"setup" sub-phase of the [POST phase](#POST_phase). - -The code that implements threads is in stacks.c. - -Hardware interrupts -=================== - -The SeaBIOS C code always runs with hardware interrupts disabled. All -of the C code entry points (see romlayout.S) are careful to explicitly -disable hardware interrupts (via "cli"). Because running with -interrupts disabled increases interrupt latency, any C code that could -loop for a significant amount of time (more than about 1 ms) should -periodically call yield(). The yield() call will briefly enable -hardware interrupts to occur, then disable interrupts, and then resume -execution of the C code. - -There are two main reasons why SeaBIOS always runs C code with -interrupts disabled. The first reason is that external software may -override the default SeaBIOS handlers that are called on a hardware -interrupt event. Indeed, it is common for DOS based applications to do -this. These legacy third party interrupt handlers may have -undocumented expectations (such as stack location and stack size) and -may attempt to call back into the various SeaBIOS software services. -Greater compatibility and more reproducible results can be achieved by -only permitting hardware interrupts at specific points (via yield() -calls). The second reason is that much of SeaBIOS runs in 32bit mode. -Attempting to handle interrupts in both 16bit mode and 32bit mode and -switching between modes to delegate those interrupts is an unneeded -complexity. Although disabling interrupts can increase interrupt -latency, this only impacts legacy systems where the small increase in -interrupt latency is unlikely to be noticeable. - -Extra 16bit stack -================= - -SeaBIOS implements 16bit real mode handlers for both hardware -interrupts and software request "interrupts". In a traditional BIOS, -these requests would use the caller's stack space. However, the -minimum amount of space the caller must provide has not been -standardized and very old DOS programs have been observed to allocate -very small amounts of stack space (100 bytes or less). - -By default, SeaBIOS now switches to its own stack on most 16bit real -mode entry points. This extra stack space is allocated in ["low -memory"](Memory Model). It ensures SeaBIOS uses a minimal amount of a -callers stack (typically no more than 16 bytes) for these legacy -calls. (More recently defined BIOS interfaces such as those that -support 16bit protected and 32bit protected mode calls standardize a -minimum stack size with adequate space, and SeaBIOS generally will not -use its extra stack in these cases.) - -The code to implement this stack "hopping" is in romlayout.S and in -stacks.c. diff --git a/payloads/external/SeaBIOS/docs/Linking_overview.md b/payloads/external/SeaBIOS/docs/Linking_overview.md deleted file mode 100644 index bcb8298c..00000000 --- a/payloads/external/SeaBIOS/docs/Linking_overview.md +++ /dev/null @@ -1,160 +0,0 @@ -This page describes the process that the SeaBIOS build uses to link -the compiled code into the final binary objects. - -Unfortunately, the SeaBIOS linking phase is complex. This complexity -is due to several unusual requirements: - -* Some BIOS entry points must reside at specific hardcoded memory - locations. The build must support positioning code and variables at - specific locations. -* In order to support multiple [memory models](Memory Model) the same - C code can be complied in three modes (16bit mode, 32bit segmented - mode, and 32bit "flat" mode). Binary code from these three modes - must be able to co-exist and on occasion reference each other. -* There is a finite amount of memory available to the BIOS. The build - will attempt to weed out unused code and variables from the final - binary. It also supports self-relocation of one-time initialization - code. - -Code layout -=========== - -To support the unusual build requirements, several -[gcc](http://en.wikipedia.org/wiki/GNU_Compiler_Collection) compiler -options are used. The "-ffunction-sections" and "-fdata-sections" -flags instruct the compiler to place each variable and function into -its own -[ELF](http://en.wikipedia.org/wiki/Executable_and_Linkable_Format) -section. - -The C code is compiled three times into three separate objects for -each of the major supported [memory models](Memory Model): -**code16.o**, **code32seg.o**, and **code32flat.o**. Information on -the sections and symbols of these three objects are extracted (using -**objdump**) and passed in to the **scripts/layoutrom.py** python -script. This script analyzes this information and produces gnu -[ld](http://en.wikipedia.org/wiki/GNU_linker) "linker scripts" which -provide precise location information to the linker. These linker -scripts are then used during the link phase which produces a **rom.o** -object containing all the code. - -Fixed location entry points ---------------------------- - -The build supports placing code entry points and variables at fixed -memory locations. This support is required in order to support the -legacy BIOS standards. For example, a program might execute an "int -0x15" to request system information from the BIOS, but another old -program might use "ljmpw $0xf000, $0xf859" instead. Both must provide -the same results and so the build must position the 0x15 interrupt -entry point in physical memory at 0xff859. - -This support is accomplished by placing the given code/variables into -ELF sections that have a name containing the substring -".fixedaddr.0x1234" (where 0x1234 is the desired address). For -variables in C code this is accomplished by marking the variables with -the VARFSEGFIXED(0x1234) macro. For assembler entry points the ORG -macro is used (see **romlayout.S**). - -During the build, the **layoutrom.py** script will detect sections -that contain the ".fixedaddr." substring and will arrange for the -final linker scripts to specify the desired address for the given -section. - -Due to the sparse nature of these fixed address sections, the -layoutrom.py script will also arrange to pack in other unrelated 16bit -code into the free space between fixed address sections (see -layoutrom.py:fitSections()). This maximizes the space available and -reduces the overall size of the final binary. - -C code in three modes ---------------------- - -SeaBIOS must support multiple [memory models](Memory Model). This is -accomplished by compiling the C code three separate times into three -separate objects. - -The C code within a mode must not accidentally call a C function in -another mode, but multiple modes must all access the same single copy -of global variables. Further, it is occasionally necessary for the C -code in one mode to obtain the address of C code in another mode. - -In order to use the same global variables between all modes, the -layoutrom.py script will detect references to global variables and -emit specific symbol definitions for those global variables in the -linker scripts so that all references use the same physical memory -address (see layoutrom.py:outXRefs()). - -To ensure C code does not accidentally call C code compiled in a -different mode, the build will ensure the symbols for C code in each -mode are isolated from each other during the linking stage. To support -those situations where an address of a C function in another mode is -required the build supports symbols with a special "\_cfuncX_" -prefix. The layoutrom.py script detects these references and will emit -a corresponding symbol definitions in the linker script that points to -the C code of the specified mode. The call32() and stack_hop_back() -macros automatically add the required prefix for C code, but the -prefixes need to be explicitly added in assembler code. - -Build garbage collection ------------------------- - -To reduce the overall size of the final SeaBIOS binary the build -supports automatically weeding out of unused code and variables. This -is done with two separate processes: when supported the gcc -"-fwhole-program" compilation flag is used, and the layoutrom.py -script checks for unreferenced ELF sections. The layoutrom.py script -builds the final linker scripts with only referenced ELF sections, and -thus unreferenced sections are weeded out from the final objects. - -When writing C code, it is necessary to mark C functions with the -VISIBLE16, VISIBLE32SEG, or VISIBLE32FLAT macros if the functions are -ever referenced from assembler code. These macros ensure the -corresponding C function is emitted by the C compiler when compiling -for the given memory mode. These macros, however, do not affect the -layoutrom.py reference check, so even a function decorated with one of -the above macros can be weeded out from the final object if it is -never referenced. - -Code relocation ---------------- - -To further reduce the runtime memory size of the BIOS, the build -supports runtime self-relocation. Normally SeaBIOS is loaded into -memory in the memory region at 0xC0000-0x100000. This is convenient -for initial binary deployment, but the space competes with memory -requirements for Option ROMs, BIOS tables, and runtime storage. By -default, SeaBIOS will self-relocate its one-time initialization code -to free up space in this region. - -To support this feature, the build attempts to automatically detect -which C code is exclusively initialization phase code (see -layoutrom.py:checkRuntime()). It does this by finding all functions -decorated with the VISIBLE32INIT macro and all functions only -reachable via functions with that macro. These "init only" functions -are then grouped together and their location and size is stored in the -binary for the runtime code to relocate (see post.c:reloc_preinit()). - -The build also locates all cross section code references along with -all absolute memory addresses in the "init only" code. These addresses -need to be modified with the new run-time address in order for the -code to successfully run at a new address. The build finds the -location of the addresses (see layoutrom.py:getRelocs()) and stores -the information in the final binary. - -Final binary checks -=================== - -At the conclusion of the main linking stage, the code is contained in -the file **rom.o**. This object file contains all of the assembler -code, variables, and the C code from all three memory model modes. - -At this point the **scripts/checkrom.py** script is run to perform -final checks on the code. The script performs some sanity checks, it -may update some tables in the binary, and it reports some size -information. - -After the checkrom.py script is run the final user visible binary is -produced. The name of the final binary is either **bios.bin**, -**Csm16.bin**, or **bios.bin.elf** depending on the SeaBIOS build -requested. diff --git a/payloads/external/SeaBIOS/docs/Mailinglist.md b/payloads/external/SeaBIOS/docs/Mailinglist.md deleted file mode 100644 index 68cdd151..00000000 --- a/payloads/external/SeaBIOS/docs/Mailinglist.md +++ /dev/null @@ -1,14 +0,0 @@ -For questions and general information about SeaBIOS, please subscribe -to the -[SeaBIOS mailing list](https://mail.coreboot.org/postorius/lists/seabios.seabios.org/). It -is necessary to subscribe to the list in order to send emails (to -combat spam). - -A mailing list archive is available at: -<https://mail.coreboot.org/hyperkitty/list/seabios@seabios.org/> - -Messages prior to January 2019 are archived at: -<http://www.seabios.org/pipermail/seabios/> - -An unofficial archive is also available at: -<https://www.mail-archive.com/seabios@seabios.org/> diff --git a/payloads/external/SeaBIOS/docs/Memory_Model.md b/payloads/external/SeaBIOS/docs/Memory_Model.md deleted file mode 100644 index 1ebe865c..00000000 --- a/payloads/external/SeaBIOS/docs/Memory_Model.md +++ /dev/null @@ -1,253 +0,0 @@ -The SeaBIOS code is required to support multiple x86 CPU memory -models. This requirement impacts the code layout and internal storage -of SeaBIOS. - -x86 Memory Models -================= - -The x86 line of CPUs has evolved over many years. The original 8086 -chip used 16bit pointers and could only address 1 megabyte of memory. -The 80286 CPU still used 16bit pointers, but could address up to 16 -megabytes of memory. The 80386 chips could process 32bit instructions -and could access up to 4 gigabyte of memory. The most recent x86 chips -can process 64bit instructions and access 16 exabytes of ram. - -During the evolution of the x86 CPUs from the 8086 to the 80386 the -BIOS was extended to handle calls in the various modes that the CPU -implemented. - -This section outlines the five different x86 CPU execution and memory -access models that SeaBIOS supports. - -16bit real mode ---------------- - -This mode is a -[segmented](http://en.wikipedia.org/wiki/Memory_segmentation) memory -mode invoked by callers. The CPU defaults to executing 16bit -instructions. Callers typically invoke the BIOS by issuing an "int x" -instruction which causes a software -[interrupt](http://en.wikipedia.org/wiki/Interrupt) that is handled by -the BIOS. The SeaBIOS code also handles hardware interrupts in this -mode. SeaBIOS can only access the first 1 megabyte of memory in this -mode, but it can access any part of that first megabyte. - -16bit bigreal mode ------------------- - -This mode is a segmented memory mode that is used for [option -roms](http://en.wikipedia.org/wiki/Option_ROM). The CPU defaults to -executing 16bit instructions and segmented memory accesses are still -used. However, the segment limits are increased so that the entire -first 4 gigabytes of memory is fully accessible. Callers can invoke -all the [16bit real mode](#16bit_real_mode) functions while in this -mode and can also invoke the Post Memory Manager (PMM) functions that -are available during option rom execution. - -16bit protected mode --------------------- - -CPU execution in this mode is similar to [16bit real -mode](#16bit_real_mode). The CPU defaults to executing 16bit -instructions. However, each segment register indexes a "descriptor -table", and it is difficult or impossible to know what the physical -address of each segment is. Generally speaking, the BIOS can only -access code and data in the f-segment. The PCIBIOS, APM BIOS, and PNP -BIOS all have documented 16bit protected mode entry points. - -Some old code may attempt to invoke the standard [16bit real -mode](#16bit_real_mode) entry points while in 16bit protected -mode. The PCI BIOS specification explicitly requires that the legacy -"int 1a" real mode entry point support 16bit protected mode calls if -they are for the PCI BIOS. Callers of other legacy entry points in -protected mode have not been observed and SeaBIOS does not support -them. - -32bit segmented mode --------------------- - -In this mode the processor runs in 32bit mode, but the segment -registers may have a limit and may have a non-zero offset. In effect, -this mode has all of the limitations of [16bit protected -mode](#16bit_protected_mode) - the main difference between the modes -is that the processor defaults to executing 32bit instructions. In -addition to these limitations, callers may also run the SeaBIOS code -at varying virtual addresses and so the code must support code -relocation. The PCI BIOS specification and APM BIOS specification -define 32bit segmented mode interfaces. - -32bit flat mode ---------------- - -In this mode the processor defaults to executing 32bit instructions, -and all segment registers have an offset of zero and allow access to -the entire first 4 gigabytes of memory. This is the only "sane" mode -for 32bit code - modern compilers and modern operating systems will -generally only support this mode (when running 32bit code). -Ironically, it's the only mode that is not strictly required for a -BIOS to support. SeaBIOS uses this mode internally to support the POST -and BOOT [phases of execution](Execution and code flow). - -code16gcc -========= - -In order to produce code that can run when the processor is in a 16bit -mode, SeaBIOS uses the -[binutils](http://en.wikipedia.org/wiki/GNU_Binutils) ".code16gcc" -assembler flag. This instructs the assembler to emit extra prefix -opcodes so that the 32bit code produced by -[gcc](http://en.wikipedia.org/wiki/GNU_Compiler_Collection) will run -even when the processor is in 16bit mode. Note that gcc always -produces 32bit code - it does not know about the ".code16gcc" flag and -does not know that the code will run in a 16bit mode. - -SeaBIOS uses the same code for all of the 16bit modes ([16bit real -mode](#16bit_real_mode), [16bit bigreal mode](#16bit_bigreal_mode), -and [16bit protected mode](#16bit_protected_mode)) and that code is -assembled using ".code16gcc". SeaBIOS is careful to use segment -registers properly so that the same code can run in the different -16bit modes that it needs to support. - -C code mode flags -================= - -Two compile time flags are available to determine the memory model the -code is intended for: MODE16 and MODESEGMENT. When compiling for the -16 bit modes, MODE16 is true and MODESEGMENT is true. In 32bit -segmented mode, MODE16 is false and MODESEGMENT is true. In 32bit flat -mode both MODE16 and MODESEGMENT are false. - -Common memory used at run-time -============================== - -There are several memory areas that the SeaBIOS "runtime" -[phase](Execution and code flow) makes use of: - -* 0x000000-0x000400: Interrupt descriptor table (IDT). This area - defines 256 interrupt vectors as defined by the Intel CPU - specification for 16bit irq handlers. This area is read/writable at - runtime and can be accessed from 16bit real mode and 16bit bigreal - mode calls. SeaBIOS only uses this area to maintain compatibility - with legacy systems. - -* 0x000400-0x000500: BIOS Data Area (BDA). This area contains various - legacy flags and attributes. The area is read/writable at runtime - and can be accessed from 16bit real mode and 16bit bigreal mode - calls. SeaBIOS only uses this area to maintain compatibility with - legacy systems. - -* 0x09FC00-0x0A0000 (typical): Extended BIOS Data Area (EBDA). This - area contains a few legacy flags and attributes. The area is - typically located at 0x9FC00, but it can be moved by option roms, by - legacy operating systems, and by SeaBIOS if - CONFIG_MALLOC_UPPERMEMORY is not set. Its actual location is - determined by a pointer in the BDA. The area is read/writable at - runtime and can be accessed from 16bit real mode and 16bit bigreal - mode calls. SeaBIOS only uses this area to maintain compatibility - with legacy systems. - -* 0x0E0000-0x0F0000 (typical): "low" memory. This area is used for - custom read/writable storage internal to SeaBIOS. The area is - read/writable at runtime and can be accessed from 16bit real mode - and 16bit bigreal mode calls. The area is typically located at the - end of the e-segment, but the build may position it anywhere in the - 0x0C0000-0x0F0000 region. However, if CONFIG_MALLOC_UPPERMEMORY is - not set, then this region is between 0x090000-0x0A0000. Space is - allocated in this region by either marking a global variable with - the "VARLOW" flag or by calling malloc_low() during - initialization. The area can be grown dynamically (via malloc_low), - but it will never exceed 64K. - -* 0x0F0000-0x100000: The BIOS segment. This area is used for both - runtime code and static variables. Space is allocated in this region - by either marking a global variable with VAR16, one of the VARFSEG - flags, or by calling malloc_fseg() during initialization. The area - is read-only at runtime and can be accessed from 16bit real mode, - 16bit bigreal mode, 16bit protected mode, and 32bit segmented mode - calls. - -All of the above areas are also read/writable during the SeaBIOS -initialization phase and are accessible when in 32bit flat mode. - -Segmented mode memory access -============================ - -The assembler entry functions for segmented mode calls (all modes -except [32bit flat mode](#32bit_flat_mode)) will arrange -to set the data segment (%ds) to be the same as the stack segment -(%ss) before calling any C code. This permits all C variables located -on the stack and C pointers to data located on the stack to work as -normal. - -However, all code running in segmented mode must wrap non-stack memory -accesses in special macros. These macros ensure the correct segment -register is used. Failure to use the correct macro will result in an -incorrect memory access that will likely cause hard to find errors. - -There are three low-level memory access macros: - -* GET_VAR / SET_VAR : Accesses a variable using the specified segment - register. This isn't typically used directly by C code. - -* GET_FARVAR / SET_FARVAR : Assigns the extra segment (%es) to the - given segment id and then performs the given memory access via %es. - -* GET_FLATPTR / SET_FLATPTR : These macros take a 32bit pointer, - construct a segment/offset pair valid in real mode, and then perform - the given access. These macros must not be used in 16bit protected - mode or 32bit segmented mode. - -Since most memory accesses are to [common memory used at -run-time](#Common_memory_used_at_run-time), several helper -macros are also available. - -* GET_IDT / SET_IDT : Access the interrupt descriptor table (IDT). - -* GET_BDA / SET_BDA : Access the BIOS Data Area (BDA). - -* GET_EBDA / SET_EBDA : Access the Extended BIOS Data Area (EBDA). - -* GET_LOW / SET_LOW : Access internal variables marked with - VARLOW. (There are also related macros GET_LOWFLAT / SET_LOWFLAT for - accessing storage allocated with malloc_low.) - -* GET_GLOBAL : Access internal variables marked with the VAR16 or - VARFSEG flags. (There is also the related macro GET_GLOBALFLAT for - accessing storage allocated with malloc_fseg.) - -Memory available during initialization -====================================== - -During the POST [phase](Execution and code flow) the code -can fully access the first 4 gigabytes of memory. However, memory -accesses are generally limited to the [common memory used at -run-time](#Common_memory_used_at_run-time) and areas -allocated at runtime via one of the malloc calls: - -* malloc_high : Permanent high-memory zone. This area is used for - custom read/writable storage internal to SeaBIOS. The area is - located at the top of the first 4 gigabytes of ram. It is commonly - used for storing standard tables accessed by the operating system at - runtime (ACPI, SMBIOS, and MPTable) and for DMA buffers used by - hardware drivers. The area is read/writable at runtime and an entry - in the e820 memory map is used to reserve it. When running on an - emulator that has only 1 megabyte of ram this zone will be empty. - -* malloc_tmphigh : Temporary high-memory zone. This area is used for - custom read/writable storage during the SeaBIOS initialization - phase. The area generally starts after the first 1 megabyte of ram - (0x100000) and ends prior to the Permanent high-memory zone. When - running on an emulator that has only 1 megabyte of ram this zone - will be empty. The area is not reserved from the operating system, - so it must not be accessed after the SeaBIOS initialization phase. - -* malloc_tmplow : Temporary low-memory zone. This area is used for - custom read/writable storage during the SeaBIOS initialization - phase. The area resides between 0x07000-0x90000. The area is not - reserved from the operating system and by specification it is - required to be zero'd at the end of the initialization phase. - -The "tmplow" and "tmphigh" regions are only available during the -initialization phase. Any access (either read or write) after -completion of the initialization phase can result in difficult to find -errors. diff --git a/payloads/external/SeaBIOS/docs/README b/payloads/external/SeaBIOS/docs/README deleted file mode 100644 index 430e0fe4..00000000 --- a/payloads/external/SeaBIOS/docs/README +++ /dev/null @@ -1,5 +0,0 @@ -This directory contains SeaBIOS documentation as found on the SeaBIOS -wiki. All the files in this directory (with the exclusion of this -README file) correspond to a page on the wiki. - -The documentation files use markdown syntax. diff --git a/payloads/external/SeaBIOS/docs/Releases.md b/payloads/external/SeaBIOS/docs/Releases.md deleted file mode 100644 index 0dc68a21..00000000 --- a/payloads/external/SeaBIOS/docs/Releases.md +++ /dev/null @@ -1,511 +0,0 @@ -History of SeaBIOS releases. Please see [download](Download) for -information on obtaining these releases. - -SeaBIOS 1.14.0 -============== - -Available on 20200810. Major changes in this release: - -* New virtio MMIO support. Support for finding virtio MMIO devices via - an ACPI DSDT parser. Support for handling a large number of virtio - devices. -* Improved handling of USB keyboards with non-standard packet size. -* Improved KVM CPU frequency detection. -* Support for PCI mmconfig support on QEMU. -* Several bug fixes and code cleanups. - -SeaBIOS 1.13.0 -============== - -Available on 20191209. Major changes in this release: - -* Support for reading logical CHS drive information from QEMU -* Workaround added for misbehaving optionroms that grab "int19" -* The TPM 2 "PCR bank" option can now be set from the TPM menu -* SeaVGABIOS support for QEMU "atiext" display -* Several bug fixes and code cleanups - -SeaBIOS 1.12.0 -============== - -Available on 20181117. Major changes in this release: - -* Initial support for "TPM CRB" hardware -* Improved cdrom media reporting in the boot menu on QEMU -* Improved floppy support on real floppy hardware -* SeaVGABIOS support for QEMU "bochs-display" and QEMU "ramfb" displays -* Several bug fixes and code cleanups - -SeaBIOS 1.12.1 --------------- - -Available on 20190314. Stable release containing only bug fixes. - -SeaBIOS 1.11.0 -============== - -Available on 20171110. Major changes in this release: - -* Initial support for NVME drives -* Support for vga emulation over a serial port in SeaBIOS (sercon) -* Support for serial debugging using MMIO based serial ports -* Support for scsi devices with multiple LUNs -* Support for boot-to-boot persistent coreboot cbmem logs -* Improved coreboot vga (cbvga) mode setting compatibility -* Several bug fixes and code cleanups - -SeaBIOS 1.11.1 --------------- - -Available on 20180319. Stable release containing only bug fixes. - -SeaBIOS 1.11.2 --------------- - -Available on 20180702. Stable release containing only bug fixes. - -SeaBIOS 1.10.0 -============== - -Available on 20161026. Major changes in this release: - -* Initial support for Trusted Platform Module (TPM) version 2.0 -* Several USB XHCI timing fixes on real hardware -* Support for "LSI MPT Fusion" scsi controllers on QEMU -* Support for virtio devices mapped above 4GB -* Several bug fixes and code cleanups - -SeaBIOS 1.10.1 --------------- - -Available on 20161122. Stable release containing only bug fixes. - - -SeaBIOS 1.10.2 --------------- - -Available on 20170228. Stable release containing only bug fixes. - -SeaBIOS 1.10.3 --------------- - -Available on 20171019. Stable release containing only bug fixes. - -SeaBIOS 1.9.0 -============= - -Available on 20151117. Major changes in this release: - -* The default boot menu key is now the ESC key (instead of F12) -* Initial support for Trusted Platform Module (TPM) hardware and BIOS calls -* Initial support for chain loading SeaBIOS from Grub (via multiboot - support) -* Initial support for booting from SD cards on real hardware -* virtio 1.0 device support -* The build will no longer include the build hostname or build time on - "clean" builds. This makes the build binaries more "reproducible". -* Basic support for running SeaBIOS on Baytrail Chromebooks -* SeaVGABIOS improvements: - * Improved support for old versions of x86emu (the "leal" - instruction is now emulated) -* Several bug fixes and code cleanups - -SeaBIOS 1.9.1 -------------- - -Available on 20160215. Stable release containing only bug fixes. - -SeaBIOS 1.9.2 -------------- - -Available on 20160422. Stable release containing only bug fixes. - -SeaBIOS 1.9.3 -------------- - -Available on 20160701. Stable release containing only bug fixes. - -SeaBIOS 1.8.0 -============= - -Available on 20150218. Major changes in this release: - -* Several USB timing fixes for USB controllers on real hardware -* Initial support for USB3 hubs -* Initial support for SD cards (on QEMU only) -* Initial support for transitioning to 32bit mode using SMIs (on QEMU - TCG only) -* SeaVGABIOS improvements - * Added cursor emulation to coreboot native init vgabios (cbvga) - * Added support for read character calls when in graphics mode -* Developer documentation added to "docs/" directory in the code - repository and several documentation updates -* Several bug fixes and code cleanups - -As of the 1.8.0 release, new feature releases will modify the first -two release numbers (eg, 1.8) and stable releases will use three -numbers (eg, 1.8.1). The prior behavior of using a forth number -(eg, 1.7.5.1) for stable releases will no longer be used. - -SeaBIOS 1.8.1 -------------- - -Available on 20150316. Stable release containing only bug fixes. - -SeaBIOS 1.8.2 -------------- - -Available on 20150617. Stable release containing only bug fixes. - -SeaBIOS 1.7.5 -============= - -Available on 20140528. Major changes in this release: - -* Support for obtaining SMBIOS tables directly from QEMU. -* XHCI USB controller fixes for real hardware (now tested on several - boards) -* SeaVGABIOS improvements - * New driver for "coreboot native vga" support - * Improved detection of older x86emu versions with incorrect - emulation. -* Several bug fixes and code cleanups - -SeaBIOS 1.7.5.1 ---------------- - -Available on 20141113. Stable release containing only bug fixes. - -SeaBIOS 1.7.5.2 ---------------- - -Available on 20150112. Stable release containing only bug fixes. - -SeaBIOS 1.7.4 -============= - -Available on 20131223. Major changes in this release: - -* Support for obtaining ACPI tables directly from QEMU. -* Initial support for XHCI USB controllers (initially for QEMU only). -* Support for booting from "pvscsi" devices on QEMU. -* Enhanced floppy driver - improved support for real hardware. -* coreboot cbmem console support. -* Optional support for using the 9-segment instead of the e-segment - for local variables. -* Improved internal timer code and accuracy. -* SeaVGABIOS improvements - * Better support for legacy X.org releases with incomplete x86emu - emulation. - * Support for using an internal stack to reduce caller's stack - usage. - * Back port of new "bochs dispi" interface video modes. -* Several bug fixes and code cleanups - * Source code separated out into additional hardware and firmware - directories. - * Update to latest version of Kconfig - -SeaBIOS 1.7.3 -============= - -Available on 20130707. Major changes in this release: - -* Initial support for using SeaBIOS as a UEFI Compatibility Support - Module (CSM) -* Support for detecting and using ACPI reboot ports. -* By default, all 16bit entry points now use an internal stack to - reduce stack footprint. -* Floppy controller code has been rewritten to improve - compatibility. Non-standard floppy sizes now work again with recent - QEMU versions. -* Several bug fixes and code cleanups - -SeaBIOS 1.7.2 -============= - -Available on 20130118. Major changes in this release: - -* Support for ICH9 host chipset ("q35") on emulators -* Support for booting from LSI MegaRAID SAS controllers -* Support for using the ACPI PM timer on emulators -* Improved Geode VGA BIOS support. -* Several bug fixes - -SeaBIOS 1.7.2.1 ---------------- - -Available on 20130227. Stable release containing only bug fixes. - -SeaBIOS 1.7.2.2 ---------------- - -Available on 20130527. Stable release containing only bug fixes. - -SeaBIOS 1.7.1 -============= - -Available on 20120831. Major changes in this release: - -* Initial support for booting from USB attached scsi (USB UAS) drives -* USB EHCI 64bit controller support -* USB MSC multi-LUN device support -* Support for booting from LSI SCSI controllers on emulators -* Support for booting from AMD PCscsi controllers on emulators -* New PCI allocation code on emulators. Support 64bit PCI bars and - mapping them above 4G. -* Support for non-linear APIC ids on emulators. -* Stack switching for 16bit real mode irq handlers to reduce stack - footprint. -* Support for custom storage in the memory at 0xc0000-0xf0000. No - longer reserve memory for custom storage in first 640k. -* Improved code generation for 16bit segment register loads -* Boot code will now (by default) reboot after 60 seconds if no boot - device found -* CBFS and FWCFG "files" are now only scanned one time -* Several bug fixes - -SeaBIOS 1.7.0 -============= - -Available on 20120414. Major changes in this release: - -* Many enhancements to VGA BIOS code - it should now be feature - complete with LGPL vgabios. -* Support for virtio-scsi. -* Improved USB drive (usb-msc) support. -* Several USB controller bug fixes and improvements. -* Runtime ACPI AML PCI hotplug construction. -* Support for running on i386 and i486 CPUs. -* Enhancements to PCI init when running on emulators. -* Several bug fixes - -SeaBIOS 1.6.3 -============= - -Available on 20111004. Major changes in this release: - -* Initial support for Xen -* PCI init (on emulators) uses a two-phase initialization -* Fixes for AHCI so it can work on real hardware. AHCI is now enabled - by default. -* Bootsplash support for BMP files -* Several configuration options can now be configured at runtime via - CBFS files (eg, "etc/boot-menu-wait") -* PCI device scan is cached during POST phase -* Several bug fixes - -The SeaBIOS 1.6.3 release was an incremental feature release. The -first release number (1) was incremented as the project was no longer -in a beta stage, and the third release number (3) was also incremented -to indicate the release was a regular feature release. - -SeaBIOS 1.6.3.1 ---------------- - -Available on 20111124. Stable release containing only bug fixes. - -SeaBIOS 1.6.3.2 ---------------- - -Available on 20120311. Stable release containing only bug fixes. - -SeaBIOS 0.6.2 -============= - -Available on 20110228. Major changes in this release: - -* Setup code can relocate to high-memory to save space in c-f segments -* Build now configured via Kconfig -* Experimental support for AHCI controllers -* Support for run-time configuration of the boot order (via - CBFS/fw_cfg "bootorder" file) -* Support T13 EDD3.0 spec -* Improved bounds checking on PCI memory allocation -* Several bug fixes - -SeaBIOS 0.6.1 -============= - -Available on 20100913. Major changes in this release: - -* Support for virtio drives -* Add ACPI definitions for cpu hotplug support -* Support for a graphical bootsplash screen -* USB mouse support -* The PCI support for emulators is less dependent on i440 chipset -* New malloc implementation which improves memalign and free -* The build system no longer double links objects -* Several bug fixes - -SeaBIOS 0.6.1.1 ---------------- - -Available on 20101031. Stable release containing only bug fixes. - -SeaBIOS 0.6.1.2 ---------------- - -Available on 20101113. Stable release containing only bug fixes. - -SeaBIOS 0.6.1.3 ---------------- - -Available on 20101226. Stable release containing only bug fixes. - -SeaBIOS 0.6.0 -============= - -Available on 20100326. Major changes in this release: - -* USB hub support -* USB drive booting support -* USB keyboard auto-repeat support -* USB EHCI controller support -* Several improvements to compatibility of PS2 port handlers for old - code -* Support for qemu e820 interface -* Several bug fixes and code cleanups - -SeaBIOS 0.5.1 -============= - -Available on 20100108. Major changes in this release: - -* Support for 32bit PCI BIOS calls -* Support for int1589 calls -* MPTable fixes for OpenBSD -* ATA DMA and bus-mastering support -* Several bug fixes and code cleanups - -SeaBIOS 0.5.0 -============= - -Available on 20091218. Major changes in this release: - -* Several enhancements ported from the Bochs BIOS derived code in qemu - and kvm -* Support for parallel hardware initialization to reduce bootup times -* Enable PCI option rom support by default (Bochs users must now - enable CONFIG_OPTIONROMS_DEPLOYED in src/config.h). Support added - for extracting option roms from qemu "fw_cfg". -* Support USB UHCI and OHCI controllers -* Initial support for USB keyboards -* SeaBIOS can now be greater than 64K -* Support for permanent low memory allocations -* APIC "local interrupts" now enabled in SeaBIOS (on emulators) -* Several bug fixes and code cleanups - -SeaBIOS 0.4.2 -============= - -Available on 20090909. Major changes in this release: - -* Implement Post Memory Manager (PMM) support. Use equivalent "malloc" - functions for internal allocations as well. -* Refactor disk "block" interface for greater expandability -* Support CBFS based floppy images -* Allow boot menu to select either floppy to boot from -* Increase ebda size to store a CDROM harddrive/floppy emulation - buffer -* Support systems with multiple vga cards (only the card with the - legacy IO ranges mapped will have its option rom executed) -* Make option rom memory be writable during option rom execution (on - emulators) -* Compile version number into code and report on each boot -* Several bug fixes and code cleanups - -SeaBIOS 0.4.1 -============= - -Available on 20090714. Major changes in this release: - -* Support older versions of gcc that predate "-fwhole-program" (eg, - v3.x) -* Add initial port of "LGPL vga bios" code into tree in "vgasrc/" - directory -* Handle ATA drives still "spinning up" during SeaBIOS drive detect -* Add support for option rom Boot Connection Vectors (BCV) -* Enhance boot menu to support booting from any drive or any cdrom -* Support flash based Coreboot File System (CBFS) -* Support booting from a CBFS "payload" -* Support coreboot table forwarder -* Support compile time definitions for multiple root PCI buses -* New tools/readserial.py tool -* Several bug fixes and code cleanups - -SeaBIOS 0.4.0 -============= - -Available on 20090206. Major changes in this release: - -* Add Bios Boot Specification (BBS) calls; add PnP call stubs -* Support option roms stored in PCI rom BAR -* Support rebooting on ctrl+alt+delete key press -* Scan PCI devices for ATA adapters (don't assume legacy ISA ATA ports - are valid) -* Attempt to automatically determine gcc capabilities/bugs during - build -* Add script to layout 16bit sections at fixed offsets and in - compacted space -* Introduce timestamp counter based delays -* Support POST calls that are really a resume -* Use new stack in EBDA for int13 disk calls to reduce stack usage -* Support the EBDA being relocated by option roms -* Move many variables from EBDA to global variables (stored in - f-segment) -* Support for PCI bridges when iterating through PCI device list -* Initial port of several KVM specific features from their Bochs BIOS - derived code -* Access BDA using segment 0x40 and IVT using segment 0x00 (which - could be important for 16bit protected mode callers) -* Several bug fixes and code cleanups - -SeaBIOS 0.3.0 -============= - -Available on 20080817. Major changes in this release: - -* Run boot code (int18/19) in 32bit mode -* Rewrite of PS2 port handling - new code is more compatible with real - hardware -* Initial support for int155f VGA option rom calls -* Several bug fixes and code cleanups - -SeaBIOS 0.2.3 -============= - -Available on 20080702. Major changes in this release: - -* Initial support for running on real hardware with coreboot -* Support parsing coreboot tables -* Support relocating bios tables from high memory when running under - coreboot -* Dynamic e820 map generation -* Serial debug support -* New tools/checkstack.py tool -* Several bug fixes and code cleanups - -SeaBIOS 0.2.2 -============= - -Formerly known as "legacybios". Available on 20080501. Major changes -in this release: - -* Several bug fixes and code cleanups - -SeaBIOS 0.2.1 -============= - -Formerly known as "legacybios". Available on 20080406. Major changes -in this release: - -* Port of boot menu code from Bochs BIOS -* Several bug fixes and code cleanups - -SeaBIOS 0.2.0 -============= - -Formerly known as "legacybios". Available on 20080330. Major changes -in this release: - -* Completion of initial port of Bochs BIOS code to gcc. diff --git a/payloads/external/SeaBIOS/docs/Runtime_config.md b/payloads/external/SeaBIOS/docs/Runtime_config.md deleted file mode 100644 index 5795382b..00000000 --- a/payloads/external/SeaBIOS/docs/Runtime_config.md +++ /dev/null @@ -1,193 +0,0 @@ -SeaBIOS can read several configuration items at runtime. On coreboot -the configuration comes from files located in CBFS. When SeaBIOS runs -natively on QEMU the files are passed from QEMU via the fw_cfg -interface. - -This page documents the user visible configuration and control -features that SeaBIOS supports. - -LZMA compression -================ - -On coreboot, when scanning files in CBFS, any filename that ends with -a ".lzma" suffix will be treated as a raw file that is compressed with -the lzma compression algorithm. This works for option ROMs, -configuration files, floppy images, etc. . (This feature should not be -used with embedded payloads - to compress payloads, use the standard -section based compression algorithm that is built into the payload -specification.) - -For example, the file **pci1106,3344.rom.lzma** would be treated the -same as **pci1106,3344.rom**, but will be automatically uncompressed -when accessed. - -A file is typically compressed with the lzma compression command line -tool. For example: - -`lzma -zc /path/to/somefile.bin > somefile.bin.lzma` - -However, some recent versions of lzma no longer supply an uncompressed -file size in the lzma header. (They instead populate the field with -zero.) Unfortunately, SeaBIOS requires the uncompressed file size, so -it may be necessary to use a different version of the lzma tool. - -File aliases -============ - -It is possible to create the equivalent of "symbolic links" so that -one file's content appears under another name. To do this, create a -**links** file with one line per link and each line having the format -of "linkname" and "destname" separated by a space character. For -example, the **links** file may look like: - -``` -pci1234,1000.rom somerom.rom -pci1234,1001.rom somerom.rom -pci1234,1002.rom somerom.rom -``` - -The above example would cause SeaBIOS to treat "pci1234,1000.rom" or -"pci1234,1001.rom" as files with the same content as the file -"somerom.rom". - -Option ROMs -=========== - -SeaBIOS will scan all of the PCI devices in the target machine for -option ROMs on PCI devices. It recognizes option ROMs in files that -have the form **pciVVVV,DDDD.rom**. The VVVV,DDDD should correspond to -the PCI vendor and device id of a device in the machine. If a given -file is found then SeaBIOS will deploy the file instead of attempting -to extract an option ROM from the device. In addition to supplying -option ROMs for on-board devices that do not store their own ROMs, -this mechanism may be used to prevent a ROM on a specific device from -running. - -SeaBIOS always deploys the VGA rom associated with the active VGA -device before any other ROMs. - -In addition, SeaBIOS will also run any file in the directory -**vgaroms/** as a VGA option ROM not specific to a device and files in -**genroms/** as a generic option ROM not specific to a device. The -ROMS in **vgaroms/** are run immediately after running the option ROM -associated with the primary VGA device (if any were found), and the -**genroms/** ROMs are run after all other PCI ROMs are run. - -Bootsplash images -================= - -SeaBIOS can show a custom [JPEG](http://en.wikipedia.org/wiki/JPEG) -image or [BMP](http://en.wikipedia.org/wiki/BMP_file_format) image -during bootup. To enable this, add the JPEG file to flash with the -name **bootsplash.jpg** or BMP file as **bootsplash.bmp**. - -The size of the image determines the video mode to use for showing the -image. Make sure the dimensions of the image exactly correspond to an -available video mode (eg, 640x480, or 1024x768), otherwise it will not -be displayed. - -SeaBIOS will show the image during the wait for the boot menu (if the -boot menu has been disabled, users will not see the image). The image -should probably have "Press ESC for boot menu" embedded in it so users -know they can enter the normal SeaBIOS boot menu. By default, the boot -menu prompt (and thus graphical image) is shown for 2.5 seconds. This -can be customized via a [configuration -parameter](#Other_Configuration_items). - -The JPEG viewer in SeaBIOS uses a simplified decoding algorithm. It -supports most common JPEGs, but does not support all possible formats. -Please see the [trouble reporting section](Debugging) if a valid image -isn't displayed properly. - -Payloads -======== - -On coreboot, SeaBIOS will treat all files found in the **img/** -directory as a coreboot payload. Each payload file will be available -for boot, and one can select from the available payloads in the -bootmenu. SeaBIOS supports both uncompressed and lzma compressed -payloads. - -Floppy images -============= - -It is possible to embed an image of a floppy into a file. SeaBIOS can -then boot from and redirect floppy BIOS calls to the image. This is -mainly useful for legacy software (such as DOS utilities). To use this -feature, place a floppy image into the directory **floppyimg/**. - -Using LZMA file compression with the [.lzma file -suffix](#LZMA_compression) is a useful way to reduce the file -size. Several floppy formats are available: 360K, 1.2MB, 720K, 1.44MB, -2.88MB, 160K, 180K, 320K. - -The floppy image will appear as writable to the system, however all -writes are discarded on reboot. - -When using this system, SeaBIOS reserves high-memory to store the -floppy. The reserved memory is then no longer available for OS use, so -this feature should only be used when needed. - -Configuring boot order -====================== - -The **bootorder** file may be used to configure the boot up order. The -file should be ASCII text and contain one line per boot method. The -description of each boot method follows an [Open -Firmware](https://secure.wikimedia.org/wikipedia/en/wiki/Open_firmware) -device path format. SeaBIOS will attempt to boot from each item in the -file - first line of the file first. - -The easiest way to find the available boot methods is to look for -"Searching bootorder for" in the SeaBIOS debug output. For example, -one may see lines similar to: - -``` -Searching bootorder for: /pci@i0cf8/*@f/drive@1/disk@0 -Searching bootorder for: /pci@i0cf8/*@f,1/drive@2/disk@1 -Searching bootorder for: /pci@i0cf8/usb@10,4/*@2 -``` - -The above represents the patterns SeaBIOS will search for in the -bootorder file. However, it's safe to just copy and paste the pattern -into bootorder. For example, the file: - -``` -/pci@i0cf8/usb@10,4/*@2 -/pci@i0cf8/*@f/drive@1/disk@0 -``` - -will instruct SeaBIOS to attempt to boot from the given USB drive -first and then attempt the given ATA harddrive second. - -SeaBIOS also supports a special "HALT" directive. If a line that -contains "HALT" is found in the bootorder file then SeaBIOS will (by -default) only attempt to boot from devices explicitly listed above -HALT in the file. - -Other Configuration items -========================= - -There are several additional configuration options available in the -**etc/** directory. - -| Filename | Description -|---------------------|--------------------------------------------------- -| show-boot-menu | Controls the display of the boot menu. Valid values are 0: Disable the boot menu, 1: Display boot menu unconditionally, 2: Skip boot menu if only one device is present. The default is 1. -| boot-menu-message | Customize the text boot menu message. Normally, when in text mode SeaBIOS will report the string "\\nPress ESC for boot menu.\\n\\n". This field allows the string to be changed. (This is a string field, and is added as a file containing the raw string.) -| boot-menu-key | Controls which key activates the boot menu. The value stored is the DOS scan code (eg, 0x86 for F12, 0x01 for Esc). If this field is set, be sure to also customize the **boot-menu-message** field above. -| boot-menu-wait | Amount of time (in milliseconds) to wait at the boot menu prompt before selecting the default boot. -| boot-fail-wait | If no boot devices are found SeaBIOS will reboot after 60 seconds. Set this to the amount of time (in milliseconds) to customize the reboot delay or set to -1 to disable rebooting when no boot devices are found -| extra-pci-roots | If the target machine has multiple independent root buses set this to a positive value. The SeaBIOS PCI probe will then search for the given number of extra root buses. -| ps2-keyboard-spinup | Some laptops that emulate PS2 keyboards don't respond to keyboard commands immediately after powering on. One may specify the amount of time (in milliseconds) here to allow as additional time for the keyboard to become responsive. When this field is set, SeaBIOS will repeatedly attempt to detect the keyboard until the keyboard is found or the specified timeout is reached. -| optionroms-checksum | Option ROMs are required to have correct checksums. However, some option ROMs in the wild don't correctly follow the specifications and have bad checksums. Set this to a zero value to allow SeaBIOS to execute them anyways. -| pci-optionrom-exec | Controls option ROM execution for roms found on PCI devices (as opposed to roms found in CBFS/fw_cfg). Valid values are 0: Execute no ROMs, 1: Execute only VGA ROMs, 2: Execute all ROMs. The default is 2 (execute all ROMs). -| s3-resume-vga-init | Set this to a non-zero value to instruct SeaBIOS to run the vga rom on an S3 resume. -| screen-and-debug | Set this to a zero value to instruct SeaBIOS to not write characters it sends to the screen to the debug ports. This can be useful when using sgabios. -| advertise-serial-debug-port | If using a serial debug port, one can set this file to a zero value to prevent SeaBIOS from listing that serial port as available for operating system use. This can be useful when running old DOS programs that are known to reset the baud rate of all advertised serial ports. -| sercon-port | Set this to the IO address of a serial port to enable SeaBIOS' VGA adapter emulation on the given serial port. -| floppy0 | Set this to the type of the first floppy drive in the system (only type 4 for 3.5 inch drives is supported). -| floppy1 | The type of the second floppy drive in the system. See the description of **floppy0** for more info. -| threads | By default, SeaBIOS will parallelize hardware initialization during bootup to reduce boot time. Multiple hardware devices can be initialized in parallel between vga initialization and option rom initialization. One can set this file to a value of zero to force hardware initialization to run serially. Alternatively, one can set this file to 2 to enable early hardware initialization that runs in parallel with vga, option rom initialization, and the boot menu. -| sdcard* | One may create one or more files with an "sdcard" prefix (eg, "etc/sdcard0") with the physical memory address of an SDHCI controller (one memory address per file). This may be useful for SDHCI controllers that do not appear as PCI devices, but are mapped to a consistent memory address. If this option is used then SeaBIOS will not scan for PCI SHDCI controllers. -| usb-time-sigatt | The USB2 specification requires devices to signal that they are attached within 100ms of the USB port being powered on. Some USB devices are known to require more time. Prior to receiving an attachment signal there is no way to know if a USB port is empty or if it has a device attached. One may specify an amount of time here (in milliseconds, default 100) to wait for a USB device attachment signal. Increasing this value will also increase the overall machine bootup time. diff --git a/payloads/external/SeaBIOS/docs/SeaBIOS.md b/payloads/external/SeaBIOS/docs/SeaBIOS.md deleted file mode 100644 index e24913a6..00000000 --- a/payloads/external/SeaBIOS/docs/SeaBIOS.md +++ /dev/null @@ -1,17 +0,0 @@ -SeaBIOS is an open source implementation of a 16bit X86 BIOS. SeaBIOS -can run in an emulator or it can run natively on X86 hardware with the -use of [coreboot](http://www.coreboot.org/). - -SeaBIOS is the default BIOS for [qemu](http://www.qemu.org/) and -[kvm](http://www.linux-kvm.org/). - -The [coreboot SeaBIOS](http://www.coreboot.org/SeaBIOS) page has -information on using SeaBIOS in coreboot. Please see the -[releases](Releases) page for information on recent releases. See the -[download](Download) page to obtain SeaBIOS. - -[SeaVGABIOS](SeaVGABIOS) is a sub-project of SeaBIOS. - -Please join the [mailing list](Mailinglist) to contribute to -SeaBIOS. Information on the internals of SeaBIOS is available on the -[Developer Documentation](Developer Documentation) page. diff --git a/payloads/external/SeaBIOS/docs/SeaVGABIOS.md b/payloads/external/SeaBIOS/docs/SeaVGABIOS.md deleted file mode 100644 index 7ec27804..00000000 --- a/payloads/external/SeaBIOS/docs/SeaVGABIOS.md +++ /dev/null @@ -1,39 +0,0 @@ -SeaVGABIOS is a sub-project of the SeaBIOS project - it is an open -source implementation of a 16bit X86 -[VGA BIOS](http://en.wikipedia.org/wiki/Video_BIOS). SeaVGABIOS is the -default VGA BIOS on [QEMU](http://www.qemu.org/). SeaVGABIOS can also -run natively on some X86 VGA hardware with -[coreboot](http://www.coreboot.org/). - -Building SeaVGABIOS -=================== - -To build SeaVGABIOS, obtain the [code](Download), run `make -menuconfig` and select the type of VGA BIOS to build in the "VGA ROM" -menu. Once selected, run `make` and the final VGA BIOS binary will be -located in "out/vgabios.bin". - -The choice of available VGA BIOSes within "make menuconfig" is -dependent on whether CONFIG_QEMU, CONFIG_COREBOOT, or CONFIG_CSM is -selected. Also, the debug options under the "Debugging" menu apply to -SeaVGABIOS. All other options found in "make menuconfig" apply only to -SeaBIOS and will not impact the SeaVGABIOS build. - -If SeaVGABIOS is needed for multiple different devices (eg, QEMU's -cirrus emulation and QEMU's "dispi" emulation), then one must compile -SeaVGABIOS multiple times with the appropriate config for each build. - -SeaVGABIOS code -=============== - -The source code for SeaVGABIOS is located in the SeaBIOS -[git repository](Download). The main VGA BIOS code is located in the -"vgasrc/" directory. The VGA BIOS code is always compiled in 16bit -mode. - -The SeaVGABIOS builds to a separate binary from the main SeaBIOS -binary, and much of the VGA BIOS code is separate from the main BIOS -code. However, much of the SeaBIOS -[developer documentation](Developer_Documentation) applies to -SeaVGABIOS. To contribute, please join the -[SeaBIOS mailing list](Mailinglist). diff --git a/payloads/external/SeaBIOS/docs/developer-certificate-of-origin b/payloads/external/SeaBIOS/docs/developer-certificate-of-origin deleted file mode 100644 index 8201f992..00000000 --- a/payloads/external/SeaBIOS/docs/developer-certificate-of-origin +++ /dev/null @@ -1,37 +0,0 @@ -Developer Certificate of Origin -Version 1.1 - -Copyright (C) 2004, 2006 The Linux Foundation and its contributors. -1 Letterman Drive -Suite D4700 -San Francisco, CA, 94129 - -Everyone is permitted to copy and distribute verbatim copies of this -license document, but changing it is not allowed. - - -Developer's Certificate of Origin 1.1 - -By making a contribution to this project, I certify that: - -(a) The contribution was created in whole or in part by me and I - have the right to submit it under the open source license - indicated in the file; or - -(b) The contribution is based upon previous work that, to the best - of my knowledge, is covered under an appropriate open source - license and I have the right under that license to submit that - work with modifications, whether created in whole or in part - by me, under the same open source license (unless I am - permitted to submit under a different license), as indicated - in the file; or - -(c) The contribution was provided directly to me by some other - person who certified (a), (b) or (c) and I have not modified - it. - -(d) I understand and agree that this project and the contribution - are public and that a record of the contribution (including all - personal information I submit with it, including my sign-off) is - maintained indefinitely and may be redistributed consistent with - this project or the open source license(s) involved. diff --git a/payloads/external/SeaBIOS/scripts/acpi_extract.py b/payloads/external/SeaBIOS/scripts/acpi_extract.py deleted file mode 100755 index 3ed863b6..00000000 --- a/payloads/external/SeaBIOS/scripts/acpi_extract.py +++ /dev/null @@ -1,366 +0,0 @@ -#!/usr/bin/python -# Copyright (C) 2011 Red Hat, Inc., Michael S. Tsirkin <mst@redhat.com> -# -# This file may be distributed under the terms of the GNU GPLv3 license. - -# Process mixed ASL/AML listing (.lst file) produced by iasl -l -# Locate and execute ACPI_EXTRACT directives, output offset info -# -# Documentation of ACPI_EXTRACT_* directive tags: -# -# These directive tags output offset information from AML for BIOS runtime -# table generation. -# Each directive is of the form: -# ACPI_EXTRACT_<TYPE> <array_name> <Operator> (...) -# and causes the extractor to create an array -# named <array_name> with offset, in the generated AML, -# of an object of a given type in the following <Operator>. -# -# A directive must fit on a single code line. -# -# Object type in AML is verified, a mismatch causes a build failure. -# -# Directives and operators currently supported are: -# ACPI_EXTRACT_NAME_DWORD_CONST - extract a Dword Const object from Name() -# ACPI_EXTRACT_NAME_WORD_CONST - extract a Word Const object from Name() -# ACPI_EXTRACT_NAME_BYTE_CONST - extract a Byte Const object from Name() -# ACPI_EXTRACT_METHOD_STRING - extract a NameString from Method() -# ACPI_EXTRACT_NAME_STRING - extract a NameString from Name() -# ACPI_EXTRACT_PROCESSOR_START - start of Processor() block -# ACPI_EXTRACT_PROCESSOR_STRING - extract a NameString from Processor() -# ACPI_EXTRACT_PROCESSOR_END - offset at last byte of Processor() + 1 -# ACPI_EXTRACT_DEVICE_START - start of Device() block -# ACPI_EXTRACT_DEVICE_STRING - extract a NameString from Device() -# ACPI_EXTRACT_DEVICE_END - offset at last byte of Device() + 1 -# ACPI_EXTRACT_PKG_START - start of Package block -# -# ACPI_EXTRACT_ALL_CODE - create an array storing the generated AML bytecode -# -# ACPI_EXTRACT is not allowed anywhere else in code, except in comments. - -import re -import sys -import fileinput - -aml = [] -asl = [] -output = {} -debug = "" - -class asl_line: - line = None - lineno = None - aml_offset = None - -def die(diag): - sys.stderr.write("Error: %s; %s\n" % (diag, debug)) - sys.exit(1) - -#Store an ASL command, matching AML offset, and input line (for debugging) -def add_asl(lineno, line): - l = asl_line() - l.line = line - l.lineno = lineno - l.aml_offset = len(aml) - asl.append(l) - -#Store an AML byte sequence -#Verify that offset output by iasl matches # of bytes so far -def add_aml(offset, line): - o = int(offset, 16) - # Sanity check: offset must match size of code so far - if (o != len(aml)): - die("Offset 0x%x != 0x%x" % (o, len(aml))) - # Strip any trailing dots and ASCII dump after " - line = re.sub(r'\s*\.*\s*".*$', "", line) - # Strip traling whitespace - line = re.sub(r'\s+$', "", line) - # Strip leading whitespace - line = re.sub(r'^\s+', "", line) - # Split on whitespace - code = re.split(r'\s+', line) - for c in code: - # Require a legal hex number, two digits - if (not(re.search(r'^[0-9A-Fa-f][0-9A-Fa-f]$', c))): - die("Unexpected octet %s" % c) - aml.append(int(c, 16)) - -# Process aml bytecode array, decoding AML -def aml_pkglen_bytes(offset): - # PkgLength can be multibyte. Bits 8-7 give the # of extra bytes. - pkglenbytes = aml[offset] >> 6 - return pkglenbytes + 1 - -def aml_pkglen(offset): - pkgstart = offset - pkglenbytes = aml_pkglen_bytes(offset) - pkglen = aml[offset] & 0x3F - # If multibyte, first nibble only uses bits 0-3 - if ((pkglenbytes > 1) and (pkglen & 0x30)): - die("PkgLen bytes 0x%x but first nibble 0x%x expected 0x0X" % - (pkglen, pkglen)) - offset += 1 - pkglenbytes -= 1 - for i in range(pkglenbytes): - pkglen |= aml[offset + i] << (i * 8 + 4) - if (len(aml) < pkgstart + pkglen): - die("PckgLen 0x%x at offset 0x%x exceeds AML size 0x%x" % - (pkglen, offset, len(aml))) - return pkglen - -# Given method offset, find its NameString offset -def aml_method_string(offset): - #0x14 MethodOp PkgLength NameString MethodFlags TermList - if (aml[offset] != 0x14): - die( "Method offset 0x%x: expected 0x14 actual 0x%x" % - (offset, aml[offset])) - offset += 1 - pkglenbytes = aml_pkglen_bytes(offset) - offset += pkglenbytes - return offset - -# Given name offset, find its NameString offset -def aml_name_string(offset): - #0x08 NameOp NameString DataRef - if (aml[offset] != 0x08): - die( "Name offset 0x%x: expected 0x08 actual 0x%x" % - (offset, aml[offset])) - offset += 1 - # Block Name Modifier. Skip it. - if (aml[offset] == 0x5c or aml[offset] == 0x5e): - offset += 1 - return offset - -# Given data offset, find 8 byte buffer offset -def aml_data_buffer8(offset): - #0x08 NameOp NameString DataRef - expect = [0x11, 0x0B, 0x0A, 0x08] - if (aml[offset:offset+4] != expect): - die( "Name offset 0x%x: expected %s actual %s" % - (offset, aml[offset:offset+4], expect)) - return offset + len(expect) - -# Given data offset, find dword const offset -def aml_data_dword_const(offset): - #0x08 NameOp NameString DataRef - if (aml[offset] != 0x0C): - die( "Name offset 0x%x: expected 0x0C actual 0x%x" % - (offset, aml[offset])) - return offset + 1 - -# Given data offset, find word const offset -def aml_data_word_const(offset): - #0x08 NameOp NameString DataRef - if (aml[offset] != 0x0B): - die( "Name offset 0x%x: expected 0x0B actual 0x%x" % - (offset, aml[offset])) - return offset + 1 - -# Given data offset, find byte const offset -def aml_data_byte_const(offset): - #0x08 NameOp NameString DataRef - if (aml[offset] != 0x0A): - die( "Name offset 0x%x: expected 0x0A actual 0x%x" % - (offset, aml[offset])) - return offset + 1 - -# Find name'd buffer8 -def aml_name_buffer8(offset): - return aml_data_buffer8(aml_name_string(offset) + 4) - -# Given name offset, find dword const offset -def aml_name_dword_const(offset): - return aml_data_dword_const(aml_name_string(offset) + 4) - -# Given name offset, find word const offset -def aml_name_word_const(offset): - return aml_data_word_const(aml_name_string(offset) + 4) - -# Given name offset, find byte const offset -def aml_name_byte_const(offset): - return aml_data_byte_const(aml_name_string(offset) + 4) - -def aml_device_start(offset): - #0x5B 0x82 DeviceOp PkgLength NameString - if ((aml[offset] != 0x5B) or (aml[offset + 1] != 0x82)): - die( "Name offset 0x%x: expected 0x5B 0x82 actual 0x%x 0x%x" % - (offset, aml[offset], aml[offset + 1])) - return offset - -def aml_device_string(offset): - #0x5B 0x82 DeviceOp PkgLength NameString - start = aml_device_start(offset) - offset += 2 - pkglenbytes = aml_pkglen_bytes(offset) - offset += pkglenbytes - return offset - -def aml_device_end(offset): - start = aml_device_start(offset) - offset += 2 - pkglenbytes = aml_pkglen_bytes(offset) - pkglen = aml_pkglen(offset) - return offset + pkglen - -def aml_processor_start(offset): - #0x5B 0x83 ProcessorOp PkgLength NameString ProcID - if ((aml[offset] != 0x5B) or (aml[offset + 1] != 0x83)): - die( "Name offset 0x%x: expected 0x5B 0x83 actual 0x%x 0x%x" % - (offset, aml[offset], aml[offset + 1])) - return offset - -def aml_processor_string(offset): - #0x5B 0x83 ProcessorOp PkgLength NameString ProcID - start = aml_processor_start(offset) - offset += 2 - pkglenbytes = aml_pkglen_bytes(offset) - offset += pkglenbytes - return offset - -def aml_processor_end(offset): - start = aml_processor_start(offset) - offset += 2 - pkglenbytes = aml_pkglen_bytes(offset) - pkglen = aml_pkglen(offset) - return offset + pkglen - -def aml_package_start(offset): - offset = aml_name_string(offset) + 4 - # 0x12 PkgLength NumElements PackageElementList - if (aml[offset] != 0x12): - die( "Name offset 0x%x: expected 0x12 actual 0x%x" % - (offset, aml[offset])) - offset += 1 - return offset + aml_pkglen_bytes(offset) + 1 - -def get_value_type(maxvalue): - #Use type large enough to fit the table - if (maxvalue >= 0x10000): - return "int" - elif (maxvalue >= 0x100): - return "short" - else: - return "char" - -def main(): - global debug - lineno = 0 - for line in fileinput.input(): - # Strip trailing newline - line = line.rstrip() - # line number and debug string to output in case of errors - lineno = lineno + 1 - debug = "input line %d: %s" % (lineno, line) - #ASL listing: space, then line#, then ...., then code - pasl = re.compile('^\s+([0-9]+)(:\s\s|\.\.\.\.)\s*') - m = pasl.search(line) - if (m): - add_asl(lineno, pasl.sub("", line)) - # AML listing: offset in hex, then ...., then code - paml = re.compile('^([0-9A-Fa-f]+)(:\s\s|\.\.\.\.)\s*') - m = paml.search(line) - if (m): - add_aml(m.group(1), paml.sub("", line)) - - # Now go over code - # Track AML offset of a previous non-empty ASL command - prev_aml_offset = -1 - for i in range(len(asl)): - debug = "input line %d: %s" % (asl[i].lineno, asl[i].line) - - l = asl[i].line - - # skip if not an extract directive - a = len(re.findall(r'ACPI_EXTRACT', l)) - if (not a): - # If not empty, store AML offset. Will be used for sanity checks - # IASL seems to put {}. at random places in the listing. - # Ignore any non-words for the purpose of this test. - m = re.search(r'\w+', l) - if (m): - prev_aml_offset = asl[i].aml_offset - continue - - if (a > 1): - die("Expected at most one ACPI_EXTRACT per line, actual %d" % a) - - mext = re.search(r''' - ^\s* # leading whitespace - /\*\s* # start C comment - (ACPI_EXTRACT_\w+) # directive: group(1) - \s+ # whitspace separates directive from array name - (\w+) # array name: group(2) - \s*\*/ # end of C comment - \s*$ # trailing whitespace - ''', l, re.VERBOSE) - if (not mext): - die("Stray ACPI_EXTRACT in input") - - # previous command must have produced some AML, - # otherwise we are in a middle of a block - if (prev_aml_offset == asl[i].aml_offset): - die("ACPI_EXTRACT directive in the middle of a block") - - directive = mext.group(1) - array = mext.group(2) - offset = asl[i].aml_offset - - if (directive == "ACPI_EXTRACT_ALL_CODE"): - if array in output: - die("%s directive used more than once" % directive) - output[array] = aml - continue - if (directive == "ACPI_EXTRACT_NAME_BUFFER8"): - offset = aml_name_buffer8(offset) - elif (directive == "ACPI_EXTRACT_NAME_DWORD_CONST"): - offset = aml_name_dword_const(offset) - elif (directive == "ACPI_EXTRACT_NAME_WORD_CONST"): - offset = aml_name_word_const(offset) - elif (directive == "ACPI_EXTRACT_NAME_BYTE_CONST"): - offset = aml_name_byte_const(offset) - elif (directive == "ACPI_EXTRACT_NAME_STRING"): - offset = aml_name_string(offset) - elif (directive == "ACPI_EXTRACT_METHOD_STRING"): - offset = aml_method_string(offset) - elif (directive == "ACPI_EXTRACT_DEVICE_START"): - offset = aml_device_start(offset) - elif (directive == "ACPI_EXTRACT_DEVICE_STRING"): - offset = aml_device_string(offset) - elif (directive == "ACPI_EXTRACT_DEVICE_END"): - offset = aml_device_end(offset) - elif (directive == "ACPI_EXTRACT_PROCESSOR_START"): - offset = aml_processor_start(offset) - elif (directive == "ACPI_EXTRACT_PROCESSOR_STRING"): - offset = aml_processor_string(offset) - elif (directive == "ACPI_EXTRACT_PROCESSOR_END"): - offset = aml_processor_end(offset) - elif (directive == "ACPI_EXTRACT_PKG_START"): - offset = aml_package_start(offset) - else: - die("Unsupported directive %s" % directive) - - if array not in output: - output[array] = [] - output[array].append(offset) - - debug = "at end of file" - - # Pretty print output - outstrs = ["/* DO NOT EDIT! This is an autogenerated file." - " See scripts/acpi_extract.py. */"] - for array in output.keys(): - otype = get_value_type(max(output[array])) - outstrs.append("static unsigned %s %s[] = {" % (otype, array)) - odata = [] - for value in output[array]: - odata.append("0x%02x" % value) - if len(odata) >= 8: - outstrs.append(" %s," % (', '.join(odata),)) - del odata[:] - outstrs.append(" %s" % (', '.join(odata),)) - outstrs.append('};') - outstrs.append('') - sys.stdout.write('\n'.join(outstrs)) - -if __name__ == '__main__': - main() diff --git a/payloads/external/SeaBIOS/scripts/acpi_extract_preprocess.py b/payloads/external/SeaBIOS/scripts/acpi_extract_preprocess.py deleted file mode 100755 index 26981184..00000000 --- a/payloads/external/SeaBIOS/scripts/acpi_extract_preprocess.py +++ /dev/null @@ -1,41 +0,0 @@ -#!/usr/bin/python -# Copyright (C) 2011 Red Hat, Inc., Michael S. Tsirkin <mst@redhat.com> -# -# This file may be distributed under the terms of the GNU GPLv3 license. - -# Read a preprocessed ASL listing and put each ACPI_EXTRACT -# directive in a comment, to make iasl skip it. -# We also put each directive on a new line, the machinery -# in scripts/acpi_extract.py requires this. - -import re -import sys -import fileinput - -def die(diag): - sys.stderr.write("Error: %s\n" % (diag)) - sys.exit(1) - -# Note: () around pattern make split return matched string as part of list -psplit = re.compile(r''' ( - \b # At word boundary - ACPI_EXTRACT_\w+ # directive - \s+ # some whitespace - \w+ # array name - )''', re.VERBOSE) - -lineno = 0 -for line in fileinput.input(): - # line number and debug string to output in case of errors - lineno = lineno + 1 - debug = "input line %d: %s" % (lineno, line.rstrip()) - - s = psplit.split(line) - # The way split works, each odd item is the matching ACPI_EXTRACT directive. - # Put each in a comment, and on a line by itself. - for i in range(len(s)): - if (i % 2): - sys.stdout.write("\n/* %s */\n" % s[i]) - else: - sys.stdout.write(s[i]) - diff --git a/payloads/external/SeaBIOS/scripts/buildrom.py b/payloads/external/SeaBIOS/scripts/buildrom.py deleted file mode 100755 index 0499049c..00000000 --- a/payloads/external/SeaBIOS/scripts/buildrom.py +++ /dev/null @@ -1,56 +0,0 @@ -#!/usr/bin/env python -# Fill in checksum/size of an option rom, and pad it to proper length. -# -# Copyright (C) 2009 Kevin O'Connor <kevin@koconnor.net> -# -# This file may be distributed under the terms of the GNU GPLv3 license. - -import sys, struct - -from python23compat import as_bytes - -def alignpos(pos, alignbytes): - mask = alignbytes - 1 - return (pos + mask) & ~mask - -def checksum(data): - if (sys.version_info > (3, 0)): - cksum = sum(data) - else: - cksum = sum(map(ord, data)) - return struct.pack('<B', (0x100 - cksum) & 0xff) - -def main(): - inname = sys.argv[1] - outname = sys.argv[2] - - # Read data in - f = open(inname, 'rb') - data = f.read() - f.close() - count = len(data) - - # Pad to a 512 byte boundary - data += as_bytes("\0") * (alignpos(count, 512) - count) - count = len(data) - - # Check if a pci header is present - pcidata = ord(data[24:25]) + (ord(data[25:26]) << 8) - if pcidata != 0: - blocks = struct.pack('<H', int(count/512)) - data = data[:pcidata + 16] + blocks + data[pcidata + 18:] - - # Fill in size field; clear checksum field - blocks = struct.pack('<B', int(count/512)) - data = data[:2] + blocks + data[3:6] + as_bytes("\0") + data[7:] - - # Checksum rom - data = data[:6] + checksum(data) + data[7:] - - # Write new rom - f = open(outname, 'wb') - f.write(data) - f.close() - -if __name__ == '__main__': - main() diff --git a/payloads/external/SeaBIOS/scripts/buildversion.py b/payloads/external/SeaBIOS/scripts/buildversion.py deleted file mode 100755 index 8875497c..00000000 --- a/payloads/external/SeaBIOS/scripts/buildversion.py +++ /dev/null @@ -1,134 +0,0 @@ -#!/usr/bin/env python -# Generate version information for a program -# -# Copyright (C) 2015 Kevin O'Connor <kevin@koconnor.net> -# -# This file may be distributed under the terms of the GNU GPLv3 license. -import sys, os, subprocess, shlex, time, socket, optparse, logging, traceback - -VERSION_FORMAT = """ -/* DO NOT EDIT! This is an autogenerated file. See scripts/buildversion.py. */ -#define BUILD_VERSION "%s" -#define BUILD_TOOLS "%s" -""" - -# Run program and return the specified output -def check_output(prog): - logging.debug("Running %s" % (repr(prog),)) - try: - process = subprocess.Popen(shlex.split(prog), stdout=subprocess.PIPE) - output = process.communicate()[0] - retcode = process.poll() - except OSError: - logging.debug("Exception on run: %s" % (traceback.format_exc(),)) - return "" - logging.debug("Got (code=%s): %s" % (retcode, repr(output))) - if retcode: - return "" - try: - return output.decode() - except UnicodeError: - logging.debug("Exception on decode: %s" % (traceback.format_exc(),)) - return "" - -# Obtain version info from "git" program -def git_version(): - if not os.path.exists('.git'): - logging.debug("No '.git' file/directory found") - return "" - ver = check_output("git describe --always --tags --long --dirty").strip() - logging.debug("Got git version: %s" % (repr(ver),)) - return ver - -# Look for version in a ".version" file. Official release tarballs -# have this file (see scripts/tarball.sh). -def file_version(): - if not os.path.isfile('.version'): - logging.debug("No '.version' file found") - return "" - try: - f = open('.version', 'r') - ver = f.readline().strip() - f.close() - except OSError: - logging.debug("Exception on read: %s" % (traceback.format_exc(),)) - return "" - logging.debug("Got .version: %s" % (repr(ver),)) - return ver - -# Generate an output file with the version information -def write_version(outfile, version, toolstr): - logging.debug("Write file %s and %s" % (repr(version), repr(toolstr))) - sys.stdout.write("Version: %s\n" % (version,)) - f = open(outfile, 'w') - f.write(VERSION_FORMAT % (version, toolstr)) - f.close() - -# Run "tool --version" for each specified tool and extract versions -def tool_versions(tools): - tools = [t.strip() for t in tools.split(';')] - versions = ['', ''] - success = 0 - for tool in tools: - # Extract first line from "tool --version" output - verstr = check_output("%s --version" % (tool,)).split('\n')[0] - # Check if this tool looks like a binutils program - isbinutils = 0 - if verstr.startswith('GNU '): - isbinutils = 1 - verstr = verstr[4:] - # Extract version information and exclude program name - if ' ' not in verstr: - continue - prog, ver = verstr.split(' ', 1) - if not prog or not ver: - continue - # Check for any version conflicts - if versions[isbinutils] and versions[isbinutils] != ver: - logging.debug("Mixed version %s vs %s" % ( - repr(versions[isbinutils]), repr(ver))) - versions[isbinutils] = "mixed" - continue - versions[isbinutils] = ver - success += 1 - cleanbuild = versions[0] and versions[1] and success == len(tools) - return cleanbuild, "gcc: %s binutils: %s" % (versions[0], versions[1]) - -def main(): - usage = "%prog [options] <outputheader.h>" - opts = optparse.OptionParser(usage) - opts.add_option("-e", "--extra", dest="extra", default="", - help="extra version string to append to version") - opts.add_option("-t", "--tools", dest="tools", default="", - help="list of build programs to extract version from") - opts.add_option("-v", action="store_true", dest="verbose", - help="enable debug messages") - - options, args = opts.parse_args() - if len(args) != 1: - opts.error("Incorrect arguments") - outfile = args[0] - if options.verbose: - logging.basicConfig(level=logging.DEBUG) - - cleanbuild, toolstr = tool_versions(options.tools) - - ver = git_version() - cleanbuild = cleanbuild and 'dirty' not in ver - if not ver: - ver = file_version() - # We expect the "extra version" to contain information on the - # distributor and distribution package version (if - # applicable). It is a "clean" build if this is a build from - # an official release tarball and the above info is present. - cleanbuild = cleanbuild and ver and options.extra != "" - if not ver: - ver = "?" - if not cleanbuild: - btime = time.strftime("%Y%m%d_%H%M%S") - hostname = socket.gethostname() - ver = "%s-%s-%s" % (ver, btime, hostname) - write_version(outfile, ver + options.extra, toolstr) - -if __name__ == '__main__': - main() diff --git a/payloads/external/SeaBIOS/scripts/checkrom.py b/payloads/external/SeaBIOS/scripts/checkrom.py deleted file mode 100755 index aced5e2c..00000000 --- a/payloads/external/SeaBIOS/scripts/checkrom.py +++ /dev/null @@ -1,95 +0,0 @@ -#!/usr/bin/env python -# Script to check a bios image and report info on it. -# -# Copyright (C) 2008 Kevin O'Connor <kevin@koconnor.net> -# -# This file may be distributed under the terms of the GNU GPLv3 license. - -import sys, struct -import layoutrom, buildrom - -from python23compat import as_bytes - -def subst(data, offset, new): - return data[:offset] + new + data[offset + len(new):] - -def checksum(data, start, size, csum): - sumbyte = buildrom.checksum(data[start:start+size]) - return subst(data, start+csum, sumbyte) - -def main(): - # Get args - objinfo, finalsize, rawfile, outfile = sys.argv[1:] - - # Read in symbols - objinfofile = open(objinfo, 'r') - symbols = layoutrom.parseObjDump(objinfofile, 'in')[1] - - # Read in raw file - f = open(rawfile, 'rb') - rawdata = f.read() - f.close() - datasize = len(rawdata) - finalsize = int(finalsize) * 1024 - if finalsize == 0: - finalsize = 64*1024 - if datasize > 64*1024: - finalsize = 128*1024 - if datasize > 128*1024: - finalsize = 256*1024 - if datasize > finalsize: - print("Error! ROM doesn't fit (%d > %d)" % (datasize, finalsize)) - print(" You have to either increase the size (CONFIG_ROM_SIZE)") - print(" or turn off some features (such as hardware support not") - print(" needed) to make it fit. Trying a more recent gcc version") - print(" might work too.") - sys.exit(1) - - # Sanity checks - start = symbols['code32flat_start'].offset - end = symbols['code32flat_end'].offset - expend = layoutrom.BUILD_BIOS_ADDR + layoutrom.BUILD_BIOS_SIZE - if end != expend: - print("Error! Code does not end at 0x%x (got 0x%x)" % ( - expend, end)) - sys.exit(1) - if datasize > finalsize: - print("Error! Code is too big (0x%x vs 0x%x)" % ( - datasize, finalsize)) - sys.exit(1) - expdatasize = end - start - if datasize != expdatasize: - print("Error! Unknown extra data (0x%x vs 0x%x)" % ( - datasize, expdatasize)) - sys.exit(1) - - # Fix up CSM Compatibility16 table - if 'csm_compat_table' in symbols and 'entry_csm' in symbols: - # Field offsets within EFI_COMPATIBILITY16_TABLE - ENTRY_FIELD_OFS = 14 # Compatibility16CallOffset (UINT16) - SIZE_FIELD_OFS = 5 # TableLength (UINT8) - CSUM_FIELD_OFS = 4 # TableChecksum (UINT8) - - tableofs = symbols['csm_compat_table'].offset - symbols['code32flat_start'].offset - entry_addr = symbols['entry_csm'].offset - layoutrom.BUILD_BIOS_ADDR - entry_addr = struct.pack('<H', entry_addr) - rawdata = subst(rawdata, tableofs+ENTRY_FIELD_OFS, entry_addr) - - tsfield = tableofs+SIZE_FIELD_OFS - tablesize = ord(rawdata[tsfield:tsfield+1]) - rawdata = checksum(rawdata, tableofs, tablesize, CSUM_FIELD_OFS) - - # Print statistics - runtimesize = end - symbols['code32init_end'].offset - print("Total size: %d Fixed: %d Free: %d (used %.1f%% of %dKiB rom)" % ( - datasize, runtimesize, finalsize - datasize - , (datasize / float(finalsize)) * 100.0 - , int(finalsize / 1024))) - - # Write final file - f = open(outfile, 'wb') - f.write((as_bytes("\0") * (finalsize - datasize)) + rawdata) - f.close() - -if __name__ == '__main__': - main() diff --git a/payloads/external/SeaBIOS/scripts/checkstack.py b/payloads/external/SeaBIOS/scripts/checkstack.py deleted file mode 100755 index 255768ae..00000000 --- a/payloads/external/SeaBIOS/scripts/checkstack.py +++ /dev/null @@ -1,226 +0,0 @@ -#!/usr/bin/env python -# Script that tries to find how much stack space each function in an -# object is using. -# -# Copyright (C) 2008-2015 Kevin O'Connor <kevin@koconnor.net> -# -# This file may be distributed under the terms of the GNU GPLv3 license. - -# Usage: -# objdump -m i386 -M i8086 -M suffix -d out/rom16.o | scripts/checkstack.py - -import sys -import re - -# Functions that change stacks -STACKHOP = ['stack_hop', 'stack_hop_back'] -# List of functions we can assume are never called. -#IGNORE = ['panic', '__dprintf'] -IGNORE = ['panic'] - -OUTPUTDESC = """ -#funcname1[preamble_stack_usage,max_usage_with_callers]: -# insn_addr:called_function [usage_at_call_point+caller_preamble,total_usage] -# -#funcname2[p,m,max_usage_to_yield_point]: -# insn_addr:called_function [u+c,t,usage_to_yield_point] -""" - -class function: - def __init__(self, funcaddr, funcname): - self.funcaddr = funcaddr - self.funcname = funcname - self.basic_stack_usage = 0 - self.max_stack_usage = None - self.yield_usage = -1 - self.max_yield_usage = None - self.total_calls = 0 - # called_funcs = [(insnaddr, calladdr, stackusage), ...] - self.called_funcs = [] - self.subfuncs = {} - # Update function info with a found "yield" point. - def noteYield(self, stackusage): - if self.yield_usage < stackusage: - self.yield_usage = stackusage - # Update function info with a found "call" point. - def noteCall(self, insnaddr, calladdr, stackusage): - if (calladdr, stackusage) in self.subfuncs: - # Already noted a nearly identical call - ignore this one. - return - self.called_funcs.append((insnaddr, calladdr, stackusage)) - self.subfuncs[(calladdr, stackusage)] = 1 - -# Find out maximum stack usage for a function -def calcmaxstack(info, funcs): - if info.max_stack_usage is not None: - return - info.max_stack_usage = max_stack_usage = info.basic_stack_usage - info.max_yield_usage = max_yield_usage = info.yield_usage - total_calls = 0 - seenbefore = {} - # Find max of all nested calls. - for insnaddr, calladdr, usage in info.called_funcs: - callinfo = funcs.get(calladdr) - if callinfo is None: - continue - calcmaxstack(callinfo, funcs) - if callinfo.funcname not in seenbefore: - seenbefore[callinfo.funcname] = 1 - total_calls += callinfo.total_calls + 1 - funcnameroot = callinfo.funcname.split('.')[0] - if funcnameroot in IGNORE: - # This called function is ignored - don't contribute it to - # the max stack. - continue - totusage = usage + callinfo.max_stack_usage - totyieldusage = usage + callinfo.max_yield_usage - if funcnameroot in STACKHOP: - # Don't count children of this function - totusage = totyieldusage = usage - if totusage > max_stack_usage: - max_stack_usage = totusage - if callinfo.max_yield_usage >= 0 and totyieldusage > max_yield_usage: - max_yield_usage = totyieldusage - info.max_stack_usage = max_stack_usage - info.max_yield_usage = max_yield_usage - info.total_calls = total_calls - -# Try to arrange output so that functions that call each other are -# near each other. -def orderfuncs(funcaddrs, availfuncs): - l = [(availfuncs[funcaddr].total_calls - , availfuncs[funcaddr].funcname, funcaddr) - for funcaddr in funcaddrs if funcaddr in availfuncs] - l.sort() - l.reverse() - out = [] - while l: - count, name, funcaddr = l.pop(0) - info = availfuncs.get(funcaddr) - if info is None: - continue - calladdrs = [calls[1] for calls in info.called_funcs] - del availfuncs[funcaddr] - out = out + orderfuncs(calladdrs, availfuncs) + [info] - return out - -hex_s = r'[0-9a-f]+' -re_func = re.compile(r'^(?P<funcaddr>' + hex_s + r') <(?P<func>.*)>:$') -re_asm = re.compile( - r'^[ ]*(?P<insnaddr>' + hex_s - + r'):\t.*\t(addr32 )?(?P<insn>.+?)[ ]*((?P<calladdr>' + hex_s - + r') <(?P<ref>.*)>)?$') -re_usestack = re.compile( - r'^(push[f]?[lw])|(sub.* [$](?P<num>0x' + hex_s + r'),%esp)$') - -def main(): - unknownfunc = function(None, "<unknown>") - indirectfunc = function(-1, '<indirect>') - unknownfunc.max_stack_usage = indirectfunc.max_stack_usage = 0 - unknownfunc.max_yield_usage = indirectfunc.max_yield_usage = -1 - funcs = {-1: indirectfunc} - cur = None - atstart = 0 - stackusage = 0 - - # Parse input lines - for line in sys.stdin.readlines(): - m = re_func.match(line) - if m is not None: - # Found function - funcaddr = int(m.group('funcaddr'), 16) - funcs[funcaddr] = cur = function(funcaddr, m.group('func')) - stackusage = 0 - atstart = 1 - continue - m = re_asm.match(line) - if m is None: - #print("other", repr(line)) - continue - insn = m.group('insn') - - im = re_usestack.match(insn) - if im is not None: - if insn.startswith('pushl') or insn.startswith('pushfl'): - stackusage += 4 - continue - elif insn.startswith('pushw') or insn.startswith('pushfw'): - stackusage += 2 - continue - stackusage += int(im.group('num'), 16) - - if atstart: - if '%esp' in insn or insn.startswith('leal'): - # Still part of initial header - continue - if not stackusage and ( - insn.startswith('test') or insn.startswith('cmp') - or insn.startswith('j')): - # There may be conditional checks prior to stack frame - continue - cur.basic_stack_usage = stackusage - atstart = 0 - - insnaddr = m.group('insnaddr') - calladdr = m.group('calladdr') - if calladdr is None: - if insn.startswith('lcallw'): - cur.noteCall(insnaddr, -1, stackusage + 4) - cur.noteYield(stackusage + 4) - elif insn.startswith('int'): - cur.noteCall(insnaddr, -1, stackusage + 6) - cur.noteYield(stackusage + 6) - elif insn.startswith('sti'): - cur.noteYield(stackusage) - else: - # misc instruction - continue - else: - # Jump or call insn - calladdr = int(calladdr, 16) - ref = m.group('ref') - if '+' in ref: - # Inter-function jump. - pass - elif insn.startswith('j'): - # Tail call - cur.noteCall(insnaddr, calladdr, 0) - elif insn.startswith('calll'): - cur.noteCall(insnaddr, calladdr, stackusage + 4) - elif insn.startswith('callw'): - cur.noteCall(insnaddr, calladdr, stackusage + 2) - else: - print("unknown call", ref) - cur.noteCall(insnaddr, calladdr, stackusage) - # Reset stack usage to preamble usage - stackusage = cur.basic_stack_usage - - # Calculate maxstackusage - for info in funcs.values(): - calcmaxstack(info, funcs) - - # Sort functions for output - funcinfos = orderfuncs(funcs.keys(), funcs.copy()) - - # Show all functions - print(OUTPUTDESC) - for info in funcinfos: - if info.max_stack_usage == 0 and info.max_yield_usage < 0: - continue - yieldstr = "" - if info.max_yield_usage >= 0: - yieldstr = ",%d" % info.max_yield_usage - print("\n%s[%d,%d%s]:" % (info.funcname, info.basic_stack_usage - , info.max_stack_usage, yieldstr)) - for insnaddr, calladdr, stackusage in info.called_funcs: - callinfo = funcs.get(calladdr, unknownfunc) - yieldstr = "" - if callinfo.max_yield_usage >= 0: - yieldstr = ",%d" % (stackusage + callinfo.max_yield_usage) - print(" %04s:%-40s [%d+%d,%d%s]" % ( - insnaddr, callinfo.funcname, stackusage - , callinfo.basic_stack_usage - , stackusage+callinfo.max_stack_usage, yieldstr)) - -if __name__ == '__main__': - main() diff --git a/payloads/external/SeaBIOS/scripts/checksum.py b/payloads/external/SeaBIOS/scripts/checksum.py deleted file mode 100755 index 773fa7aa..00000000 --- a/payloads/external/SeaBIOS/scripts/checksum.py +++ /dev/null @@ -1,16 +0,0 @@ -#!/usr/bin/env python -# Script to report the checksum of a file. -# -# Copyright (C) 2009 Kevin O'Connor <kevin@koconnor.net> -# -# This file may be distributed under the terms of the GNU GPLv3 license. - -import sys - -def main(): - data = sys.stdin.read() - ords = map(ord, data) - print("sum=%x\n" % sum(ords)) - -if __name__ == '__main__': - main() diff --git a/payloads/external/SeaBIOS/scripts/encodeint.py b/payloads/external/SeaBIOS/scripts/encodeint.py deleted file mode 100755 index 0d34aee0..00000000 --- a/payloads/external/SeaBIOS/scripts/encodeint.py +++ /dev/null @@ -1,21 +0,0 @@ -#!/usr/bin/env python -# Encode an integer in little endian format in a file. -# -# Copyright (C) 2011 Kevin O'Connor <kevin@koconnor.net> -# -# This file may be distributed under the terms of the GNU GPLv3 license. - -import sys -import struct - -def main(): - filename = sys.argv[1] - value = int(sys.argv[2], 0) - - outval = struct.pack('<Q', value) - f = open(filename, 'wb') - f.write(outval) - f.close() - -if __name__ == '__main__': - main() diff --git a/payloads/external/SeaBIOS/scripts/gen-offsets.sh b/payloads/external/SeaBIOS/scripts/gen-offsets.sh deleted file mode 100755 index 73dede82..00000000 --- a/payloads/external/SeaBIOS/scripts/gen-offsets.sh +++ /dev/null @@ -1,17 +0,0 @@ -#!/bin/sh -# Extract definitions from an assembler file. This is based on code -# from the Linux Kernel. -INFILE=$1 -OUTFILE=$2 -cat > "$OUTFILE" <<EOF -// This is an auto-generated file. DO NOT EDIT! -// Generated with "$0 $@" -#ifndef __ASM_OFFSETS_H -#define __ASM_OFFSETS_H -EOF -sed -ne "/^->/{s:->#\(.*\):/* \1 */:; \ - s:^->\([^ ]*\) [\$\#]*\([^ ]*\) \(.*\):#define \1 \2 /* \3 */:; \ - s:->::; p;}" < "$INFILE" >> "$OUTFILE" -cat >> "$OUTFILE" <<EOF -#endif // asm-offsets.h -EOF diff --git a/payloads/external/SeaBIOS/scripts/kconfig/.gitignore b/payloads/external/SeaBIOS/scripts/kconfig/.gitignore deleted file mode 100644 index be603c4f..00000000 --- a/payloads/external/SeaBIOS/scripts/kconfig/.gitignore +++ /dev/null @@ -1,22 +0,0 @@ -# -# Generated files -# -config* -*.lex.c -*.tab.c -*.tab.h -zconf.hash.c -*.moc -gconf.glade.h -*.pot -*.mo - -# -# configuration programs -# -conf -mconf -nconf -qconf -gconf -kxgettext diff --git a/payloads/external/SeaBIOS/scripts/kconfig/Makefile b/payloads/external/SeaBIOS/scripts/kconfig/Makefile deleted file mode 100644 index 1c129361..00000000 --- a/payloads/external/SeaBIOS/scripts/kconfig/Makefile +++ /dev/null @@ -1,331 +0,0 @@ -# =========================================================================== -# Kernel configuration targets -# These targets are used from top-level makefile - -PHONY += oldconfig xconfig gconfig menuconfig config silentoldconfig update-po-config \ - localmodconfig localyesconfig - -ifdef KBUILD_KCONFIG -Kconfig := $(KBUILD_KCONFIG) -else -Kconfig := Kconfig -endif - -# We need this, in case the user has it in its environment -unexport CONFIG_ - -xconfig: $(obj)/qconf - $< $(Kconfig) - -gconfig: $(obj)/gconf - $< $(Kconfig) - -menuconfig: $(obj)/mconf - $< $(Kconfig) - -config: $(obj)/conf - $< --oldaskconfig $(Kconfig) - -nconfig: $(obj)/nconf - $< $(Kconfig) - -oldconfig: $(obj)/conf - $< --$@ $(Kconfig) - -silentoldconfig: $(obj)/conf - @echo " Build Kconfig config file" - $(Q)mkdir -p include/config include/generated - $(Q)$< --$@ $(Kconfig) - -localyesconfig localmodconfig: $(obj)/streamline_config.pl $(obj)/conf - $(Q)mkdir -p include/config include/generated - $(Q)perl $< --$@ $(srctree) $(Kconfig) > .tmp.config - $(Q)if [ -f .config ]; then \ - cmp -s .tmp.config .config || \ - (mv -f .config .config.old.1; \ - mv -f .tmp.config .config; \ - $(obj)/conf --silentoldconfig $(Kconfig); \ - mv -f .config.old.1 .config.old) \ - else \ - mv -f .tmp.config .config; \ - $(obj)/conf --silentoldconfig $(Kconfig); \ - fi - $(Q)rm -f .tmp.config - -# Create new linux.pot file -# Adjust charset to UTF-8 in .po file to accept UTF-8 in Kconfig files -update-po-config: $(obj)/kxgettext $(obj)/gconf.glade.h - $(Q)echo " GEN config.pot" - $(Q)xgettext --default-domain=linux \ - --add-comments --keyword=_ --keyword=N_ \ - --from-code=UTF-8 \ - --files-from=$(srctree)/scripts/kconfig/POTFILES.in \ - --directory=$(srctree) --directory=$(objtree) \ - --output $(obj)/config.pot - $(Q)sed -i s/CHARSET/UTF-8/ $(obj)/config.pot - $(Q)(for i in `ls $(srctree)/arch/*/Kconfig \ - $(srctree)/arch/*/um/Kconfig`; \ - do \ - echo " GEN $$i"; \ - $(obj)/kxgettext $$i \ - >> $(obj)/config.pot; \ - done ) - $(Q)echo " GEN linux.pot" - $(Q)msguniq --sort-by-file --to-code=UTF-8 $(obj)/config.pot \ - --output $(obj)/linux.pot - $(Q)rm -f $(obj)/config.pot - -PHONY += allnoconfig allyesconfig allmodconfig alldefconfig randconfig - -allnoconfig allyesconfig allmodconfig alldefconfig randconfig: $(obj)/conf - $< --$@ $(Kconfig) - -PHONY += listnewconfig olddefconfig oldnoconfig savedefconfig defconfig - -listnewconfig olddefconfig: $(obj)/conf - $< --$@ $(Kconfig) - -# oldnoconfig is an alias of olddefconfig, because people already are dependent -# on its behavior(sets new symbols to their default value but not 'n') with the -# counter-intuitive name. -oldnoconfig: $(obj)/conf - $< --olddefconfig $(Kconfig) - -savedefconfig: $(obj)/conf - $< --$@=defconfig $(Kconfig) - -defconfig: $(obj)/conf - @echo " Build default config" - $(Q)$< --defconfig=/dev/null $(Kconfig) - -%_defconfig: $(obj)/conf - $(Q)$< --defconfig=arch/$(SRCARCH)/configs/$@ $(Kconfig) - -# Help text used by make help -help: - @echo ' config - Update current config utilising a line-oriented program' - @echo ' nconfig - Update current config utilising a ncurses menu based program' - @echo ' menuconfig - Update current config utilising a menu based program' - @echo ' xconfig - Update current config utilising a QT based front-end' - @echo ' gconfig - Update current config utilising a GTK based front-end' - @echo ' oldconfig - Update current config utilising a provided .config as base' - @echo ' localmodconfig - Update current config disabling modules not loaded' - @echo ' localyesconfig - Update current config converting local mods to core' - @echo ' silentoldconfig - Same as oldconfig, but quietly, additionally update deps' - @echo ' defconfig - New config with default from ARCH supplied defconfig' - @echo ' savedefconfig - Save current config as ./defconfig (minimal config)' - @echo ' allnoconfig - New config where all options are answered with no' - @echo ' allyesconfig - New config where all options are accepted with yes' - @echo ' allmodconfig - New config selecting modules when possible' - @echo ' alldefconfig - New config with all symbols set to default' - @echo ' randconfig - New config with random answer to all options' - @echo ' listnewconfig - List new options' - @echo ' olddefconfig - Same as silentoldconfig but sets new symbols to their default value' - -# lxdialog stuff -check-lxdialog := $(srctree)/$(src)/lxdialog/check-lxdialog.sh - -# Use recursively expanded variables so we do not call gcc unless -# we really need to do so. (Do not call gcc as part of make mrproper) -HOST_EXTRACFLAGS += $(shell $(CONFIG_SHELL) $(check-lxdialog) -ccflags) \ - -DLOCALE - -# =========================================================================== -# Shared Makefile for the various kconfig executables: -# conf: Used for defconfig, oldconfig and related targets -# nconf: Used for the nconfig target. -# Utilizes ncurses -# mconf: Used for the menuconfig target -# Utilizes the lxdialog package -# qconf: Used for the xconfig target -# Based on QT which needs to be installed to compile it -# gconf: Used for the gconfig target -# Based on GTK which needs to be installed to compile it -# object files used by all kconfig flavours - -lxdialog := lxdialog/checklist.o lxdialog/util.o lxdialog/inputbox.o -lxdialog += lxdialog/textbox.o lxdialog/yesno.o lxdialog/menubox.o - -conf-objs := conf.o zconf.tab.o -mconf-objs := mconf.o zconf.tab.o $(lxdialog) -nconf-objs := nconf.o zconf.tab.o nconf.gui.o -kxgettext-objs := kxgettext.o zconf.tab.o -qconf-cxxobjs := qconf.o -qconf-objs := zconf.tab.o -gconf-objs := gconf.o zconf.tab.o - -hostprogs-y := conf - -ifeq ($(MAKECMDGOALS),nconfig) - hostprogs-y += nconf -endif - -ifeq ($(MAKECMDGOALS),menuconfig) - hostprogs-y += mconf -endif - -ifeq ($(MAKECMDGOALS),update-po-config) - hostprogs-y += kxgettext -endif - -ifeq ($(MAKECMDGOALS),xconfig) - qconf-target := 1 -endif -ifeq ($(MAKECMDGOALS),gconfig) - gconf-target := 1 -endif - - -ifeq ($(qconf-target),1) - hostprogs-y += qconf -endif - -ifeq ($(gconf-target),1) - hostprogs-y += gconf -endif - -clean-files := qconf.moc .tmp_qtcheck .tmp_gtkcheck -clean-files += zconf.tab.c zconf.lex.c zconf.hash.c gconf.glade.h -clean-files += mconf qconf gconf nconf -clean-files += config.pot linux.pot - -# Check that we have the required ncurses stuff installed for lxdialog (menuconfig) -PHONY += $(obj)/dochecklxdialog -$(addprefix $(obj)/,$(lxdialog)): $(obj)/dochecklxdialog -$(obj)/dochecklxdialog: - $(Q)$(CONFIG_SHELL) $(check-lxdialog) -check $(HOSTCC) $(HOST_EXTRACFLAGS) $(HOSTLOADLIBES_mconf) - -always := dochecklxdialog - -# Add environment specific flags -HOST_EXTRACFLAGS += $(shell $(CONFIG_SHELL) $(srctree)/$(src)/check.sh $(HOSTCC) $(HOSTCFLAGS)) - -# generated files seem to need this to find local include files -HOSTCFLAGS_zconf.lex.o := -I$(src) -HOSTCFLAGS_zconf.tab.o := -I$(src) - -LEX_PREFIX_zconf := zconf -YACC_PREFIX_zconf := zconf - -HOSTLOADLIBES_qconf = $(KC_QT_LIBS) -HOSTCXXFLAGS_qconf.o = $(KC_QT_CFLAGS) - -HOSTLOADLIBES_gconf = `pkg-config --libs gtk+-2.0 gmodule-2.0 libglade-2.0` -HOSTCFLAGS_gconf.o = `pkg-config --cflags gtk+-2.0 gmodule-2.0 libglade-2.0` \ - -Wno-missing-prototypes - -HOSTLOADLIBES_mconf = $(shell $(CONFIG_SHELL) $(check-lxdialog) -ldflags $(HOSTCC)) - -HOSTLOADLIBES_nconf = $(shell \ - pkg-config --libs menu panel ncurses 2>/dev/null \ - || echo "-lmenu -lpanel -lncurses" ) -$(obj)/qconf.o: $(obj)/.tmp_qtcheck - -ifeq ($(qconf-target),1) -$(obj)/.tmp_qtcheck: $(src)/Makefile --include $(obj)/.tmp_qtcheck - -# QT needs some extra effort... -$(obj)/.tmp_qtcheck: - @set -e; echo " CHECK qt"; dir=""; pkg=""; \ - if ! pkg-config --exists QtCore 2> /dev/null; then \ - echo "* Unable to find the QT4 tool qmake. Trying to use QT3"; \ - pkg-config --exists qt 2> /dev/null && pkg=qt; \ - pkg-config --exists qt-mt 2> /dev/null && pkg=qt-mt; \ - if [ -n "$$pkg" ]; then \ - cflags="\$$(shell pkg-config $$pkg --cflags)"; \ - libs="\$$(shell pkg-config $$pkg --libs)"; \ - moc="\$$(shell pkg-config $$pkg --variable=prefix)/bin/moc"; \ - dir="$$(pkg-config $$pkg --variable=prefix)"; \ - else \ - for d in $$QTDIR /usr/share/qt* /usr/lib/qt*; do \ - if [ -f $$d/include/qconfig.h ]; then dir=$$d; break; fi; \ - done; \ - if [ -z "$$dir" ]; then \ - echo >&2 "*"; \ - echo >&2 "* Unable to find any QT installation. Please make sure that"; \ - echo >&2 "* the QT4 or QT3 development package is correctly installed and"; \ - echo >&2 "* either qmake can be found or install pkg-config or set"; \ - echo >&2 "* the QTDIR environment variable to the correct location."; \ - echo >&2 "*"; \ - false; \ - fi; \ - libpath=$$dir/lib; lib=qt; osdir=""; \ - $(HOSTCXX) -print-multi-os-directory > /dev/null 2>&1 && \ - osdir=x$$($(HOSTCXX) -print-multi-os-directory); \ - test -d $$libpath/$$osdir && libpath=$$libpath/$$osdir; \ - test -f $$libpath/libqt-mt.so && lib=qt-mt; \ - cflags="-I$$dir/include"; \ - libs="-L$$libpath -Wl,-rpath,$$libpath -l$$lib"; \ - moc="$$dir/bin/moc"; \ - fi; \ - if [ ! -x $$dir/bin/moc -a -x /usr/bin/moc ]; then \ - echo "*"; \ - echo "* Unable to find $$dir/bin/moc, using /usr/bin/moc instead."; \ - echo "*"; \ - moc="/usr/bin/moc"; \ - fi; \ - else \ - cflags="\$$(shell pkg-config QtCore QtGui Qt3Support --cflags)"; \ - libs="\$$(shell pkg-config QtCore QtGui Qt3Support --libs)"; \ - moc="\$$(shell pkg-config QtCore --variable=moc_location)"; \ - [ -n "$$moc" ] || moc="\$$(shell pkg-config QtCore --variable=prefix)/bin/moc"; \ - fi; \ - echo "KC_QT_CFLAGS=$$cflags" > $@; \ - echo "KC_QT_LIBS=$$libs" >> $@; \ - echo "KC_QT_MOC=$$moc" >> $@ -endif - -$(obj)/gconf.o: $(obj)/.tmp_gtkcheck - -ifeq ($(gconf-target),1) --include $(obj)/.tmp_gtkcheck - -# GTK needs some extra effort, too... -$(obj)/.tmp_gtkcheck: - @if `pkg-config --exists gtk+-2.0 gmodule-2.0 libglade-2.0`; then \ - if `pkg-config --atleast-version=2.0.0 gtk+-2.0`; then \ - touch $@; \ - else \ - echo >&2 "*"; \ - echo >&2 "* GTK+ is present but version >= 2.0.0 is required."; \ - echo >&2 "*"; \ - false; \ - fi \ - else \ - echo >&2 "*"; \ - echo >&2 "* Unable to find the GTK+ installation. Please make sure that"; \ - echo >&2 "* the GTK+ 2.0 development package is correctly installed..."; \ - echo >&2 "* You need gtk+-2.0, glib-2.0 and libglade-2.0."; \ - echo >&2 "*"; \ - false; \ - fi -endif - -$(obj)/zconf.tab.o: $(obj)/zconf.lex.c $(obj)/zconf.hash.c - -$(obj)/qconf.o: $(obj)/qconf.moc - -quiet_cmd_moc = MOC $@ - cmd_moc = $(KC_QT_MOC) -i $< -o $@ - -$(obj)/%.moc: $(src)/%.h $(obj)/.tmp_qtcheck - $(call cmd,moc) - -# Extract gconf menu items for I18N support -$(obj)/gconf.glade.h: $(obj)/gconf.glade - $(Q)intltool-extract --type=gettext/glade --srcdir=$(srctree) \ - $(obj)/gconf.glade - -VPATH := $(srctree) - -$(obj)/%:: $(src)/%_shipped - $(Q)cat $< > $@ - -host-cobjs := $(sort $(foreach m,$(hostprogs-y),$($(m)-objs))) -host-cobjs := $(addprefix $(obj)/,$(host-cobjs)) -hostprogs-y := $(addprefix $(obj)/,$(hostprogs-y)) -$(host-cobjs) : $(obj)/%.o : $(src)/%.c - $(Q)$(HOSTCC) -I$(obj) -I$(srctree)/$(src) $(HOSTCFLAGS) $(HOSTCFLAGS_$(@F)) $(HOST_EXTRACFLAGS) -c -o $@ $< -$(hostprogs-y) : $(obj)/% : $(host-cobjs) - $(Q)$(HOSTCC) $(HOSTLDFLAGS) -o $@ $(addprefix $(obj)/,$($(@F)-objs)) $(HOST_LOADLIBES) $(HOSTLOADLIBES_$(@F)) diff --git a/payloads/external/SeaBIOS/scripts/kconfig/POTFILES.in b/payloads/external/SeaBIOS/scripts/kconfig/POTFILES.in deleted file mode 100644 index 96745739..00000000 --- a/payloads/external/SeaBIOS/scripts/kconfig/POTFILES.in +++ /dev/null @@ -1,12 +0,0 @@ -scripts/kconfig/lxdialog/checklist.c -scripts/kconfig/lxdialog/inputbox.c -scripts/kconfig/lxdialog/menubox.c -scripts/kconfig/lxdialog/textbox.c -scripts/kconfig/lxdialog/util.c -scripts/kconfig/lxdialog/yesno.c -scripts/kconfig/mconf.c -scripts/kconfig/conf.c -scripts/kconfig/confdata.c -scripts/kconfig/gconf.c -scripts/kconfig/gconf.glade.h -scripts/kconfig/qconf.cc diff --git a/payloads/external/SeaBIOS/scripts/kconfig/check.sh b/payloads/external/SeaBIOS/scripts/kconfig/check.sh deleted file mode 100755 index 55b79ba1..00000000 --- a/payloads/external/SeaBIOS/scripts/kconfig/check.sh +++ /dev/null @@ -1,13 +0,0 @@ -#!/bin/sh -# Needed for systems without gettext -$* -x c -o /dev/null - > /dev/null 2>&1 << EOF -#include <libintl.h> -int main() -{ - gettext(""); - return 0; -} -EOF -if [ ! "$?" -eq "0" ]; then - echo -DKBUILD_NO_NLS; -fi diff --git a/payloads/external/SeaBIOS/scripts/kconfig/conf.c b/payloads/external/SeaBIOS/scripts/kconfig/conf.c deleted file mode 100644 index fef75fc7..00000000 --- a/payloads/external/SeaBIOS/scripts/kconfig/conf.c +++ /dev/null @@ -1,718 +0,0 @@ -/* - * Copyright (C) 2002 Roman Zippel <zippel@linux-m68k.org> - * Released under the terms of the GNU GPL v2.0. - */ - -#include <locale.h> -#include <ctype.h> -#include <stdio.h> -#include <stdlib.h> -#include <string.h> -#include <time.h> -#include <unistd.h> -#include <getopt.h> -#include <sys/stat.h> -#include <sys/time.h> -#include <errno.h> - -#include "lkc.h" - -static void conf(struct menu *menu); -static void check_conf(struct menu *menu); -static void xfgets(char *str, int size, FILE *in); - -enum input_mode { - oldaskconfig, - silentoldconfig, - oldconfig, - allnoconfig, - allyesconfig, - allmodconfig, - alldefconfig, - randconfig, - defconfig, - savedefconfig, - listnewconfig, - olddefconfig, -} input_mode = oldaskconfig; - -static int indent = 1; -static int tty_stdio; -static int valid_stdin = 1; -static int sync_kconfig; -static int conf_cnt; -static char line[128]; -static struct menu *rootEntry; - -static void print_help(struct menu *menu) -{ - struct gstr help = str_new(); - - menu_get_ext_help(menu, &help); - - printf("\n%s\n", str_get(&help)); - str_free(&help); -} - -static void strip(char *str) -{ - char *p = str; - int l; - - while ((isspace(*p))) - p++; - l = strlen(p); - if (p != str) - memmove(str, p, l + 1); - if (!l) - return; - p = str + l - 1; - while ((isspace(*p))) - *p-- = 0; -} - -static void check_stdin(void) -{ - if (!valid_stdin) { - printf(_("aborted!\n\n")); - printf(_("Console input/output is redirected. ")); - printf(_("Run 'make oldconfig' to update configuration.\n\n")); - exit(1); - } -} - -static int conf_askvalue(struct symbol *sym, const char *def) -{ - enum symbol_type type = sym_get_type(sym); - - if (!sym_has_value(sym)) - printf(_("(NEW) ")); - - line[0] = '\n'; - line[1] = 0; - - if (!sym_is_changable(sym)) { - printf("%s\n", def); - line[0] = '\n'; - line[1] = 0; - return 0; - } - - switch (input_mode) { - case oldconfig: - case silentoldconfig: - if (sym_has_value(sym)) { - printf("%s\n", def); - return 0; - } - check_stdin(); - /* fall through */ - case oldaskconfig: - fflush(stdout); - xfgets(line, 128, stdin); - if (!tty_stdio) - printf("\n"); - return 1; - default: - break; - } - - switch (type) { - case S_INT: - case S_HEX: - case S_STRING: - printf("%s\n", def); - return 1; - default: - ; - } - printf("%s", line); - return 1; -} - -static int conf_string(struct menu *menu) -{ - struct symbol *sym = menu->sym; - const char *def; - - while (1) { - printf("%*s%s ", indent - 1, "", _(menu->prompt->text)); - printf("(%s) ", sym->name); - def = sym_get_string_value(sym); - if (sym_get_string_value(sym)) - printf("[%s] ", def); - if (!conf_askvalue(sym, def)) - return 0; - switch (line[0]) { - case '\n': - break; - case '?': - /* print help */ - if (line[1] == '\n') { - print_help(menu); - def = NULL; - break; - } - /* fall through */ - default: - line[strlen(line)-1] = 0; - def = line; - } - if (def && sym_set_string_value(sym, def)) - return 0; - } -} - -static int conf_sym(struct menu *menu) -{ - struct symbol *sym = menu->sym; - tristate oldval, newval; - - while (1) { - printf("%*s%s ", indent - 1, "", _(menu->prompt->text)); - if (sym->name) - printf("(%s) ", sym->name); - putchar('['); - oldval = sym_get_tristate_value(sym); - switch (oldval) { - case no: - putchar('N'); - break; - case mod: - putchar('M'); - break; - case yes: - putchar('Y'); - break; - } - if (oldval != no && sym_tristate_within_range(sym, no)) - printf("/n"); - if (oldval != mod && sym_tristate_within_range(sym, mod)) - printf("/m"); - if (oldval != yes && sym_tristate_within_range(sym, yes)) - printf("/y"); - if (menu_has_help(menu)) - printf("/?"); - printf("] "); - if (!conf_askvalue(sym, sym_get_string_value(sym))) - return 0; - strip(line); - - switch (line[0]) { - case 'n': - case 'N': - newval = no; - if (!line[1] || !strcmp(&line[1], "o")) - break; - continue; - case 'm': - case 'M': - newval = mod; - if (!line[1]) - break; - continue; - case 'y': - case 'Y': - newval = yes; - if (!line[1] || !strcmp(&line[1], "es")) - break; - continue; - case 0: - newval = oldval; - break; - case '?': - goto help; - default: - continue; - } - if (sym_set_tristate_value(sym, newval)) - return 0; -help: - print_help(menu); - } -} - -static int conf_choice(struct menu *menu) -{ - struct symbol *sym, *def_sym; - struct menu *child; - bool is_new; - - sym = menu->sym; - is_new = !sym_has_value(sym); - if (sym_is_changable(sym)) { - conf_sym(menu); - sym_calc_value(sym); - switch (sym_get_tristate_value(sym)) { - case no: - return 1; - case mod: - return 0; - case yes: - break; - } - } else { - switch (sym_get_tristate_value(sym)) { - case no: - return 1; - case mod: - printf("%*s%s\n", indent - 1, "", _(menu_get_prompt(menu))); - return 0; - case yes: - break; - } - } - - while (1) { - int cnt, def; - - printf("%*s%s\n", indent - 1, "", _(menu_get_prompt(menu))); - def_sym = sym_get_choice_value(sym); - cnt = def = 0; - line[0] = 0; - for (child = menu->list; child; child = child->next) { - if (!menu_is_visible(child)) - continue; - if (!child->sym) { - printf("%*c %s\n", indent, '*', _(menu_get_prompt(child))); - continue; - } - cnt++; - if (child->sym == def_sym) { - def = cnt; - printf("%*c", indent, '>'); - } else - printf("%*c", indent, ' '); - printf(" %d. %s", cnt, _(menu_get_prompt(child))); - if (child->sym->name) - printf(" (%s)", child->sym->name); - if (!sym_has_value(child->sym)) - printf(_(" (NEW)")); - printf("\n"); - } - printf(_("%*schoice"), indent - 1, ""); - if (cnt == 1) { - printf("[1]: 1\n"); - goto conf_childs; - } - printf("[1-%d", cnt); - if (menu_has_help(menu)) - printf("?"); - printf("]: "); - switch (input_mode) { - case oldconfig: - case silentoldconfig: - if (!is_new) { - cnt = def; - printf("%d\n", cnt); - break; - } - check_stdin(); - /* fall through */ - case oldaskconfig: - fflush(stdout); - xfgets(line, 128, stdin); - strip(line); - if (line[0] == '?') { - print_help(menu); - continue; - } - if (!line[0]) - cnt = def; - else if (isdigit(line[0])) - cnt = atoi(line); - else - continue; - break; - default: - break; - } - - conf_childs: - for (child = menu->list; child; child = child->next) { - if (!child->sym || !menu_is_visible(child)) - continue; - if (!--cnt) - break; - } - if (!child) - continue; - if (line[0] && line[strlen(line) - 1] == '?') { - print_help(child); - continue; - } - sym_set_choice_value(sym, child->sym); - for (child = child->list; child; child = child->next) { - indent += 2; - conf(child); - indent -= 2; - } - return 1; - } -} - -static void conf(struct menu *menu) -{ - struct symbol *sym; - struct property *prop; - struct menu *child; - - if (!menu_is_visible(menu)) - return; - - sym = menu->sym; - prop = menu->prompt; - if (prop) { - const char *prompt; - - switch (prop->type) { - case P_MENU: - if ((input_mode == silentoldconfig || - input_mode == listnewconfig || - input_mode == olddefconfig) && - rootEntry != menu) { - check_conf(menu); - return; - } - /* fall through */ - case P_COMMENT: - prompt = menu_get_prompt(menu); - if (prompt) - printf("%*c\n%*c %s\n%*c\n", - indent, '*', - indent, '*', _(prompt), - indent, '*'); - default: - ; - } - } - - if (!sym) - goto conf_childs; - - if (sym_is_choice(sym)) { - conf_choice(menu); - if (sym->curr.tri != mod) - return; - goto conf_childs; - } - - switch (sym->type) { - case S_INT: - case S_HEX: - case S_STRING: - conf_string(menu); - break; - default: - conf_sym(menu); - break; - } - -conf_childs: - if (sym) - indent += 2; - for (child = menu->list; child; child = child->next) - conf(child); - if (sym) - indent -= 2; -} - -static void check_conf(struct menu *menu) -{ - struct symbol *sym; - struct menu *child; - - if (!menu_is_visible(menu)) - return; - - sym = menu->sym; - if (sym && !sym_has_value(sym)) { - if (sym_is_changable(sym) || - (sym_is_choice(sym) && sym_get_tristate_value(sym) == yes)) { - if (input_mode == listnewconfig) { - if (sym->name && !sym_is_choice_value(sym)) { - printf("%s%s\n", CONFIG_, sym->name); - } - } else if (input_mode != olddefconfig) { - if (!conf_cnt++) - printf(_("*\n* Restart config...\n*\n")); - rootEntry = menu_get_parent_menu(menu); - conf(rootEntry); - } - } - } - - for (child = menu->list; child; child = child->next) - check_conf(child); -} - -static struct option long_opts[] = { - {"oldaskconfig", no_argument, NULL, oldaskconfig}, - {"oldconfig", no_argument, NULL, oldconfig}, - {"silentoldconfig", no_argument, NULL, silentoldconfig}, - {"defconfig", optional_argument, NULL, defconfig}, - {"savedefconfig", required_argument, NULL, savedefconfig}, - {"allnoconfig", no_argument, NULL, allnoconfig}, - {"allyesconfig", no_argument, NULL, allyesconfig}, - {"allmodconfig", no_argument, NULL, allmodconfig}, - {"alldefconfig", no_argument, NULL, alldefconfig}, - {"randconfig", no_argument, NULL, randconfig}, - {"listnewconfig", no_argument, NULL, listnewconfig}, - {"olddefconfig", no_argument, NULL, olddefconfig}, - /* - * oldnoconfig is an alias of olddefconfig, because people already - * are dependent on its behavior(sets new symbols to their default - * value but not 'n') with the counter-intuitive name. - */ - {"oldnoconfig", no_argument, NULL, olddefconfig}, - {NULL, 0, NULL, 0} -}; - -static void conf_usage(const char *progname) -{ - - printf("Usage: %s [option] <kconfig-file>\n", progname); - printf("[option] is _one_ of the following:\n"); - printf(" --listnewconfig List new options\n"); - printf(" --oldaskconfig Start a new configuration using a line-oriented program\n"); - printf(" --oldconfig Update a configuration using a provided .config as base\n"); - printf(" --silentoldconfig Same as oldconfig, but quietly, additionally update deps\n"); - printf(" --olddefconfig Same as silentoldconfig but sets new symbols to their default value\n"); - printf(" --oldnoconfig An alias of olddefconfig\n"); - printf(" --defconfig <file> New config with default defined in <file>\n"); - printf(" --savedefconfig <file> Save the minimal current configuration to <file>\n"); - printf(" --allnoconfig New config where all options are answered with no\n"); - printf(" --allyesconfig New config where all options are answered with yes\n"); - printf(" --allmodconfig New config where all options are answered with mod\n"); - printf(" --alldefconfig New config with all symbols set to default\n"); - printf(" --randconfig New config with random answer to all options\n"); -} - -int main(int ac, char **av) -{ - const char *progname = av[0]; - int opt; - const char *name, *defconfig_file = NULL /* gcc uninit */; - struct stat tmpstat; - - setlocale(LC_ALL, ""); - bindtextdomain(PACKAGE, LOCALEDIR); - textdomain(PACKAGE); - - tty_stdio = isatty(0) && isatty(1) && isatty(2); - - while ((opt = getopt_long(ac, av, "", long_opts, NULL)) != -1) { - input_mode = (enum input_mode)opt; - switch (opt) { - case silentoldconfig: - sync_kconfig = 1; - break; - case defconfig: - case savedefconfig: - defconfig_file = optarg; - break; - case randconfig: - { - struct timeval now; - unsigned int seed; - char *seed_env; - - /* - * Use microseconds derived seed, - * compensate for systems where it may be zero - */ - gettimeofday(&now, NULL); - seed = (unsigned int)((now.tv_sec + 1) * (now.tv_usec + 1)); - - seed_env = getenv("KCONFIG_SEED"); - if( seed_env && *seed_env ) { - char *endp; - int tmp = (int)strtol(seed_env, &endp, 0); - if (*endp == '\0') { - seed = tmp; - } - } - fprintf( stderr, "KCONFIG_SEED=0x%X\n", seed ); - srand(seed); - break; - } - case oldaskconfig: - case oldconfig: - case allnoconfig: - case allyesconfig: - case allmodconfig: - case alldefconfig: - case listnewconfig: - case olddefconfig: - break; - case '?': - conf_usage(progname); - exit(1); - break; - } - } - if (ac == optind) { - printf(_("%s: Kconfig file missing\n"), av[0]); - conf_usage(progname); - exit(1); - } - name = av[optind]; - conf_parse(name); - //zconfdump(stdout); - if (sync_kconfig) { - name = conf_get_configname(); - if (stat(name, &tmpstat)) { - fprintf(stderr, _("***\n" - "*** Configuration file \"%s\" not found!\n" - "***\n" - "*** Please run some configurator (e.g. \"make oldconfig\" or\n" - "*** \"make menuconfig\" or \"make xconfig\").\n" - "***\n"), name); - exit(1); - } - } - - switch (input_mode) { - case defconfig: - if (!defconfig_file) - defconfig_file = conf_get_default_confname(); - if (conf_read(defconfig_file)) { - printf(_("***\n" - "*** Can't find default configuration \"%s\"!\n" - "***\n"), defconfig_file); - exit(1); - } - break; - case savedefconfig: - case silentoldconfig: - case oldaskconfig: - case oldconfig: - case listnewconfig: - case olddefconfig: - conf_read(NULL); - break; - case allnoconfig: - case allyesconfig: - case allmodconfig: - case alldefconfig: - case randconfig: - name = getenv("KCONFIG_ALLCONFIG"); - if (!name) - break; - if ((strcmp(name, "") != 0) && (strcmp(name, "1") != 0)) { - if (conf_read_simple(name, S_DEF_USER)) { - fprintf(stderr, - _("*** Can't read seed configuration \"%s\"!\n"), - name); - exit(1); - } - break; - } - switch (input_mode) { - case allnoconfig: name = "allno.config"; break; - case allyesconfig: name = "allyes.config"; break; - case allmodconfig: name = "allmod.config"; break; - case alldefconfig: name = "alldef.config"; break; - case randconfig: name = "allrandom.config"; break; - default: break; - } - if (conf_read_simple(name, S_DEF_USER) && - conf_read_simple("all.config", S_DEF_USER)) { - fprintf(stderr, - _("*** KCONFIG_ALLCONFIG set, but no \"%s\" or \"all.config\" file found\n"), - name); - exit(1); - } - break; - default: - break; - } - - if (sync_kconfig) { - if (conf_get_changed()) { - name = getenv("KCONFIG_NOSILENTUPDATE"); - if (name && *name) { - fprintf(stderr, - _("\n*** The configuration requires explicit update.\n\n")); - return 1; - } - } - valid_stdin = tty_stdio; - } - - switch (input_mode) { - case allnoconfig: - conf_set_all_new_symbols(def_no); - break; - case allyesconfig: - conf_set_all_new_symbols(def_yes); - break; - case allmodconfig: - conf_set_all_new_symbols(def_mod); - break; - case alldefconfig: - conf_set_all_new_symbols(def_default); - break; - case randconfig: - /* Really nothing to do in this loop */ - while (conf_set_all_new_symbols(def_random)) ; - break; - case defconfig: - conf_set_all_new_symbols(def_default); - break; - case savedefconfig: - break; - case oldaskconfig: - rootEntry = &rootmenu; - conf(&rootmenu); - input_mode = silentoldconfig; - /* fall through */ - case oldconfig: - case listnewconfig: - case olddefconfig: - case silentoldconfig: - /* Update until a loop caused no more changes */ - do { - conf_cnt = 0; - check_conf(&rootmenu); - } while (conf_cnt && - (input_mode != listnewconfig && - input_mode != olddefconfig)); - break; - } - - if (sync_kconfig) { - /* silentoldconfig is used during the build so we shall update autoconf. - * All other commands are only used to generate a config. - */ - if (conf_get_changed() && conf_write(NULL)) { - fprintf(stderr, _("\n*** Error during writing of the configuration.\n\n")); - exit(1); - } - if (conf_write_autoconf()) { - fprintf(stderr, _("\n*** Error during update of the configuration.\n\n")); - return 1; - } - } else if (input_mode == savedefconfig) { - if (conf_write_defconfig(defconfig_file)) { - fprintf(stderr, _("n*** Error while saving defconfig to: %s\n\n"), - defconfig_file); - return 1; - } - } else if (input_mode != listnewconfig) { - if (conf_write(NULL)) { - fprintf(stderr, _("\n*** Error during writing of the configuration.\n\n")); - exit(1); - } - } - return 0; -} - -/* - * Helper function to facilitate fgets() by Jean Sacren. - */ -void xfgets(char *str, int size, FILE *in) -{ - if (fgets(str, size, in) == NULL) - fprintf(stderr, "\nError in reading or end of file.\n"); -} diff --git a/payloads/external/SeaBIOS/scripts/kconfig/confdata.c b/payloads/external/SeaBIOS/scripts/kconfig/confdata.c deleted file mode 100644 index 08e75599..00000000 --- a/payloads/external/SeaBIOS/scripts/kconfig/confdata.c +++ /dev/null @@ -1,1250 +0,0 @@ -/* - * Copyright (C) 2002 Roman Zippel <zippel@linux-m68k.org> - * Released under the terms of the GNU GPL v2.0. - */ - -#include <sys/stat.h> -#include <ctype.h> -#include <errno.h> -#include <fcntl.h> -#include <stdarg.h> -#include <stdio.h> -#include <stdlib.h> -#include <string.h> -#include <time.h> -#include <unistd.h> - -#include "lkc.h" - -static void conf_warning(const char *fmt, ...) - __attribute__ ((format (printf, 1, 2))); - -static void conf_message(const char *fmt, ...) - __attribute__ ((format (printf, 1, 2))); - -static const char *conf_filename; -static int conf_lineno, conf_warnings, conf_unsaved; - -const char conf_defname[] = "arch/$ARCH/defconfig"; - -static void conf_warning(const char *fmt, ...) -{ - va_list ap; - va_start(ap, fmt); - fprintf(stderr, "%s:%d:warning: ", conf_filename, conf_lineno); - vfprintf(stderr, fmt, ap); - fprintf(stderr, "\n"); - va_end(ap); - conf_warnings++; -} - -static void conf_default_message_callback(const char *fmt, va_list ap) -{ - printf("#\n# "); - vprintf(fmt, ap); - printf("\n#\n"); -} - -static void (*conf_message_callback) (const char *fmt, va_list ap) = - conf_default_message_callback; -void conf_set_message_callback(void (*fn) (const char *fmt, va_list ap)) -{ - conf_message_callback = fn; -} - -static void conf_message(const char *fmt, ...) -{ - va_list ap; - - va_start(ap, fmt); - if (conf_message_callback) - conf_message_callback(fmt, ap); -} - -const char *conf_get_configname(void) -{ - char *name = getenv("KCONFIG_CONFIG"); - - return name ? name : ".config"; -} - -const char *conf_get_autoconfig_name(void) -{ - char *name = getenv("KCONFIG_AUTOCONFIG"); - - return name ? name : "include/config/auto.conf"; -} - -static char *conf_expand_value(const char *in) -{ - struct symbol *sym; - const char *src; - static char res_value[SYMBOL_MAXLENGTH]; - char *dst, name[SYMBOL_MAXLENGTH]; - - res_value[0] = 0; - dst = name; - while ((src = strchr(in, '$'))) { - strncat(res_value, in, src - in); - src++; - dst = name; - while (isalnum(*src) || *src == '_') - *dst++ = *src++; - *dst = 0; - sym = sym_lookup(name, 0); - sym_calc_value(sym); - strcat(res_value, sym_get_string_value(sym)); - in = src; - } - strcat(res_value, in); - - return res_value; -} - -char *conf_get_default_confname(void) -{ - struct stat buf; - static char fullname[PATH_MAX+1]; - char *env, *name; - - name = conf_expand_value(conf_defname); - env = getenv(SRCTREE); - if (env) { - sprintf(fullname, "%s/%s", env, name); - if (!stat(fullname, &buf)) - return fullname; - } - return name; -} - -static int conf_set_sym_val(struct symbol *sym, int def, int def_flags, char *p) -{ - char *p2; - - switch (sym->type) { - case S_TRISTATE: - if (p[0] == 'm') { - sym->def[def].tri = mod; - sym->flags |= def_flags; - break; - } - /* fall through */ - case S_BOOLEAN: - if (p[0] == 'y') { - sym->def[def].tri = yes; - sym->flags |= def_flags; - break; - } - if (p[0] == 'n') { - sym->def[def].tri = no; - sym->flags |= def_flags; - break; - } - if (def != S_DEF_AUTO) - conf_warning("symbol value '%s' invalid for %s", - p, sym->name); - return 1; - case S_OTHER: - if (*p != '"') { - for (p2 = p; *p2 && !isspace(*p2); p2++) - ; - sym->type = S_STRING; - goto done; - } - /* fall through */ - case S_STRING: - if (*p++ != '"') - break; - for (p2 = p; (p2 = strpbrk(p2, "\"\\")); p2++) { - if (*p2 == '"') { - *p2 = 0; - break; - } - memmove(p2, p2 + 1, strlen(p2)); - } - if (!p2) { - if (def != S_DEF_AUTO) - conf_warning("invalid string found"); - return 1; - } - /* fall through */ - case S_INT: - case S_HEX: - done: - if (sym_string_valid(sym, p)) { - sym->def[def].val = strdup(p); - sym->flags |= def_flags; - } else { - if (def != S_DEF_AUTO) - conf_warning("symbol value '%s' invalid for %s", - p, sym->name); - return 1; - } - break; - default: - ; - } - return 0; -} - -#define LINE_GROWTH 16 -static int add_byte(int c, char **lineptr, size_t slen, size_t *n) -{ - char *nline; - size_t new_size = slen + 1; - if (new_size > *n) { - new_size += LINE_GROWTH - 1; - new_size *= 2; - nline = realloc(*lineptr, new_size); - if (!nline) - return -1; - - *lineptr = nline; - *n = new_size; - } - - (*lineptr)[slen] = c; - - return 0; -} - -static ssize_t compat_getline(char **lineptr, size_t *n, FILE *stream) -{ - char *line = *lineptr; - size_t slen = 0; - - for (;;) { - int c = getc(stream); - - switch (c) { - case '\n': - if (add_byte(c, &line, slen, n) < 0) - goto e_out; - slen++; - /* fall through */ - case EOF: - if (add_byte('\0', &line, slen, n) < 0) - goto e_out; - *lineptr = line; - if (slen == 0) - return -1; - return slen; - default: - if (add_byte(c, &line, slen, n) < 0) - goto e_out; - slen++; - } - } - -e_out: - line[slen-1] = '\0'; - *lineptr = line; - return -1; -} - -int conf_read_simple(const char *name, int def) -{ - FILE *in = NULL; - char *line = NULL; - size_t line_asize = 0; - char *p, *p2; - struct symbol *sym; - int i, def_flags; - - if (name) { - in = zconf_fopen(name); - } else { - struct property *prop; - - name = conf_get_configname(); - in = zconf_fopen(name); - if (in) - goto load; - sym_add_change_count(1); - if (!sym_defconfig_list) { - if (modules_sym) - sym_calc_value(modules_sym); - return 1; - } - - for_all_defaults(sym_defconfig_list, prop) { - if (expr_calc_value(prop->visible.expr) == no || - prop->expr->type != E_SYMBOL) - continue; - name = conf_expand_value(prop->expr->left.sym->name); - in = zconf_fopen(name); - if (in) { - conf_message(_("using defaults found in %s"), - name); - goto load; - } - } - } - if (!in) - return 1; - -load: - conf_filename = name; - conf_lineno = 0; - conf_warnings = 0; - conf_unsaved = 0; - - def_flags = SYMBOL_DEF << def; - for_all_symbols(i, sym) { - sym->flags |= SYMBOL_CHANGED; - sym->flags &= ~(def_flags|SYMBOL_VALID); - if (sym_is_choice(sym)) - sym->flags |= def_flags; - switch (sym->type) { - case S_INT: - case S_HEX: - case S_STRING: - if (sym->def[def].val) - free(sym->def[def].val); - /* fall through */ - default: - sym->def[def].val = NULL; - sym->def[def].tri = no; - } - } - - while (compat_getline(&line, &line_asize, in) != -1) { - conf_lineno++; - sym = NULL; - if (line[0] == '#') { - if (memcmp(line + 2, CONFIG_, strlen(CONFIG_))) - continue; - p = strchr(line + 2 + strlen(CONFIG_), ' '); - if (!p) - continue; - *p++ = 0; - if (strncmp(p, "is not set", 10)) - continue; - if (def == S_DEF_USER) { - sym = sym_find(line + 2 + strlen(CONFIG_)); - if (!sym) { - sym_add_change_count(1); - goto setsym; - } - } else { - sym = sym_lookup(line + 2 + strlen(CONFIG_), 0); - if (sym->type == S_UNKNOWN) - sym->type = S_BOOLEAN; - } - if (sym->flags & def_flags) { - conf_warning("override: reassigning to symbol %s", sym->name); - } - switch (sym->type) { - case S_BOOLEAN: - case S_TRISTATE: - sym->def[def].tri = no; - sym->flags |= def_flags; - break; - default: - ; - } - } else if (memcmp(line, CONFIG_, strlen(CONFIG_)) == 0) { - p = strchr(line + strlen(CONFIG_), '='); - if (!p) - continue; - *p++ = 0; - p2 = strchr(p, '\n'); - if (p2) { - *p2-- = 0; - if (*p2 == '\r') - *p2 = 0; - } - if (def == S_DEF_USER) { - sym = sym_find(line + strlen(CONFIG_)); - if (!sym) { - sym_add_change_count(1); - goto setsym; - } - } else { - sym = sym_lookup(line + strlen(CONFIG_), 0); - if (sym->type == S_UNKNOWN) - sym->type = S_OTHER; - } - if (sym->flags & def_flags) { - conf_warning("override: reassigning to symbol %s", sym->name); - } - if (conf_set_sym_val(sym, def, def_flags, p)) - continue; - } else { - if (line[0] != '\r' && line[0] != '\n') - conf_warning("unexpected data"); - continue; - } -setsym: - if (sym && sym_is_choice_value(sym)) { - struct symbol *cs = prop_get_symbol(sym_get_choice_prop(sym)); - switch (sym->def[def].tri) { - case no: - break; - case mod: - if (cs->def[def].tri == yes) { - conf_warning("%s creates inconsistent choice state", sym->name); - cs->flags &= ~def_flags; - } - break; - case yes: - if (cs->def[def].tri != no) - conf_warning("override: %s changes choice state", sym->name); - cs->def[def].val = sym; - break; - } - cs->def[def].tri = EXPR_OR(cs->def[def].tri, sym->def[def].tri); - } - } - free(line); - fclose(in); - - if (modules_sym) - sym_calc_value(modules_sym); - return 0; -} - -int conf_read(const char *name) -{ - struct symbol *sym; - int i; - - sym_set_change_count(0); - - if (conf_read_simple(name, S_DEF_USER)) - return 1; - - for_all_symbols(i, sym) { - sym_calc_value(sym); - if (sym_is_choice(sym) || (sym->flags & SYMBOL_AUTO)) - continue; - if (sym_has_value(sym) && (sym->flags & SYMBOL_WRITE)) { - /* check that calculated value agrees with saved value */ - switch (sym->type) { - case S_BOOLEAN: - case S_TRISTATE: - if (sym->def[S_DEF_USER].tri != sym_get_tristate_value(sym)) - break; - if (!sym_is_choice(sym)) - continue; - /* fall through */ - default: - if (!strcmp(sym->curr.val, sym->def[S_DEF_USER].val)) - continue; - break; - } - } else if (!sym_has_value(sym) && !(sym->flags & SYMBOL_WRITE)) - /* no previous value and not saved */ - continue; - conf_unsaved++; - /* maybe print value in verbose mode... */ - } - - for_all_symbols(i, sym) { - if (sym_has_value(sym) && !sym_is_choice_value(sym)) { - /* Reset values of generates values, so they'll appear - * as new, if they should become visible, but that - * doesn't quite work if the Kconfig and the saved - * configuration disagree. - */ - if (sym->visible == no && !conf_unsaved) - sym->flags &= ~SYMBOL_DEF_USER; - switch (sym->type) { - case S_STRING: - case S_INT: - case S_HEX: - /* Reset a string value if it's out of range */ - if (sym_string_within_range(sym, sym->def[S_DEF_USER].val)) - break; - sym->flags &= ~(SYMBOL_VALID|SYMBOL_DEF_USER); - conf_unsaved++; - break; - default: - break; - } - } - } - - sym_add_change_count(conf_warnings || conf_unsaved); - - return 0; -} - -/* - * Kconfig configuration printer - * - * This printer is used when generating the resulting configuration after - * kconfig invocation and `defconfig' files. Unset symbol might be omitted by - * passing a non-NULL argument to the printer. - * - */ -static void -kconfig_print_symbol(FILE *fp, struct symbol *sym, const char *value, void *arg) -{ - - switch (sym->type) { - case S_BOOLEAN: - case S_TRISTATE: - if (*value == 'n') { - bool skip_unset = (arg != NULL); - - if (!skip_unset) - fprintf(fp, "# %s%s is not set\n", - CONFIG_, sym->name); - return; - } - break; - default: - break; - } - - fprintf(fp, "%s%s=%s\n", CONFIG_, sym->name, value); -} - -static void -kconfig_print_comment(FILE *fp, const char *value, void *arg) -{ - const char *p = value; - size_t l; - - for (;;) { - l = strcspn(p, "\n"); - fprintf(fp, "#"); - if (l) { - fprintf(fp, " "); - xfwrite(p, l, 1, fp); - p += l; - } - fprintf(fp, "\n"); - if (*p++ == '\0') - break; - } -} - -static struct conf_printer kconfig_printer_cb = -{ - .print_symbol = kconfig_print_symbol, - .print_comment = kconfig_print_comment, -}; - -/* - * Header printer - * - * This printer is used when generating the `include/generated/autoconf.h' file. - */ -static void -header_print_symbol(FILE *fp, struct symbol *sym, const char *value, void *arg) -{ - - switch (sym->type) { - case S_BOOLEAN: - case S_TRISTATE: { - const char *suffix = ""; - - switch (*value) { - case 'n': - fprintf(fp, "#define %s%s%s 0\n", - CONFIG_, sym->name, suffix); - break; - case 'm': - suffix = "_MODULE"; - /* fall through */ - default: - fprintf(fp, "#define %s%s%s 1\n", - CONFIG_, sym->name, suffix); - } - break; - } - case S_HEX: { - const char *prefix = ""; - - if (value[0] != '0' || (value[1] != 'x' && value[1] != 'X')) - prefix = "0x"; - if (!value[0]) - prefix = "0"; - fprintf(fp, "#define %s%s %s%s\n", - CONFIG_, sym->name, prefix, value); - break; - } - case S_STRING: - case S_INT: - fprintf(fp, "#define %s%s %s\n", - CONFIG_, sym->name, value); - break; - default: - break; - } - -} - -static void -header_print_comment(FILE *fp, const char *value, void *arg) -{ - const char *p = value; - size_t l; - - fprintf(fp, "/*\n"); - for (;;) { - l = strcspn(p, "\n"); - fprintf(fp, " *"); - if (l) { - fprintf(fp, " "); - xfwrite(p, l, 1, fp); - p += l; - } - fprintf(fp, "\n"); - if (*p++ == '\0') - break; - } - fprintf(fp, " */\n"); -} - -static struct conf_printer header_printer_cb = -{ - .print_symbol = header_print_symbol, - .print_comment = header_print_comment, -}; - -/* - * Tristate printer - * - * This printer is used when generating the `include/config/tristate.conf' file. - */ -static void -tristate_print_symbol(FILE *fp, struct symbol *sym, const char *value, void *arg) -{ - - if (sym->type == S_TRISTATE && *value != 'n') - fprintf(fp, "%s%s=%c\n", CONFIG_, sym->name, (char)toupper(*value)); -} - -static struct conf_printer tristate_printer_cb = -{ - .print_symbol = tristate_print_symbol, - .print_comment = kconfig_print_comment, -}; - -static void conf_write_symbol(FILE *fp, struct symbol *sym, - struct conf_printer *printer, void *printer_arg) -{ - const char *str; - - switch (sym->type) { - case S_OTHER: - case S_UNKNOWN: - break; - case S_STRING: - str = sym_get_string_value(sym); - str = sym_escape_string_value(str); - printer->print_symbol(fp, sym, str, printer_arg); - free((void *)str); - break; - default: - str = sym_get_string_value(sym); - printer->print_symbol(fp, sym, str, printer_arg); - } -} - -static void -conf_write_heading(FILE *fp, struct conf_printer *printer, void *printer_arg) -{ - char buf[256]; - - snprintf(buf, sizeof(buf), - "\n" - "Automatically generated file; DO NOT EDIT.\n" - "%s\n", - rootmenu.prompt->text); - - printer->print_comment(fp, buf, printer_arg); -} - -/* - * Write out a minimal config. - * All values that has default values are skipped as this is redundant. - */ -int conf_write_defconfig(const char *filename) -{ - struct symbol *sym; - struct menu *menu; - FILE *out; - - out = fopen(filename, "w"); - if (!out) - return 1; - - sym_clear_all_valid(); - - /* Traverse all menus to find all relevant symbols */ - menu = rootmenu.list; - - while (menu != NULL) - { - sym = menu->sym; - if (sym == NULL) { - if (!menu_is_visible(menu)) - goto next_menu; - } else if (!sym_is_choice(sym)) { - sym_calc_value(sym); - if (!(sym->flags & SYMBOL_WRITE)) - goto next_menu; - sym->flags &= ~SYMBOL_WRITE; - /* If we cannot change the symbol - skip */ - if (!sym_is_changable(sym)) - goto next_menu; - /* If symbol equals to default value - skip */ - if (strcmp(sym_get_string_value(sym), sym_get_string_default(sym)) == 0) - goto next_menu; - - /* - * If symbol is a choice value and equals to the - * default for a choice - skip. - * But only if value is bool and equal to "y" and - * choice is not "optional". - * (If choice is "optional" then all values can be "n") - */ - if (sym_is_choice_value(sym)) { - struct symbol *cs; - struct symbol *ds; - - cs = prop_get_symbol(sym_get_choice_prop(sym)); - ds = sym_choice_default(cs); - if (!sym_is_optional(cs) && sym == ds) { - if ((sym->type == S_BOOLEAN) && - sym_get_tristate_value(sym) == yes) - goto next_menu; - } - } - conf_write_symbol(out, sym, &kconfig_printer_cb, NULL); - } -next_menu: - if (menu->list != NULL) { - menu = menu->list; - } - else if (menu->next != NULL) { - menu = menu->next; - } else { - while ((menu = menu->parent)) { - if (menu->next != NULL) { - menu = menu->next; - break; - } - } - } - } - fclose(out); - return 0; -} - -int conf_write(const char *name) -{ - FILE *out; - struct symbol *sym; - struct menu *menu; - const char *basename; - const char *str; - char dirname[PATH_MAX+1], tmpname[PATH_MAX+1], newname[PATH_MAX+1]; - char *env; - - dirname[0] = 0; - if (name && name[0]) { - struct stat st; - char *slash; - - if (!stat(name, &st) && S_ISDIR(st.st_mode)) { - strcpy(dirname, name); - strcat(dirname, "/"); - basename = conf_get_configname(); - } else if ((slash = strrchr(name, '/'))) { - int size = slash - name + 1; - memcpy(dirname, name, size); - dirname[size] = 0; - if (slash[1]) - basename = slash + 1; - else - basename = conf_get_configname(); - } else - basename = name; - } else - basename = conf_get_configname(); - - sprintf(newname, "%s%s", dirname, basename); - env = getenv("KCONFIG_OVERWRITECONFIG"); - if (!env || !*env) { - sprintf(tmpname, "%s.tmpconfig.%d", dirname, (int)getpid()); - out = fopen(tmpname, "w"); - } else { - *tmpname = 0; - out = fopen(newname, "w"); - } - if (!out) - return 1; - - conf_write_heading(out, &kconfig_printer_cb, NULL); - - if (!conf_get_changed()) - sym_clear_all_valid(); - - menu = rootmenu.list; - while (menu) { - sym = menu->sym; - if (!sym) { - if (!menu_is_visible(menu)) - goto next; - str = menu_get_prompt(menu); - fprintf(out, "\n" - "#\n" - "# %s\n" - "#\n", str); - } else if (!(sym->flags & SYMBOL_CHOICE)) { - sym_calc_value(sym); - if (!(sym->flags & SYMBOL_WRITE)) - goto next; - sym->flags &= ~SYMBOL_WRITE; - - conf_write_symbol(out, sym, &kconfig_printer_cb, NULL); - } - -next: - if (menu->list) { - menu = menu->list; - continue; - } - if (menu->next) - menu = menu->next; - else while ((menu = menu->parent)) { - if (menu->next) { - menu = menu->next; - break; - } - } - } - fclose(out); - - if (*tmpname) { - strcat(dirname, basename); - strcat(dirname, ".old"); - rename(newname, dirname); - if (rename(tmpname, newname)) - return 1; - } - - conf_message(_("configuration written to %s"), newname); - - sym_set_change_count(0); - - return 0; -} - -static int conf_split_config(void) -{ - const char *name; - char path[PATH_MAX+1]; - char *s, *d, c; - struct symbol *sym; - struct stat sb; - int res, i, fd; - - name = conf_get_autoconfig_name(); - conf_read_simple(name, S_DEF_AUTO); - - if (chdir("include/config")) - return 1; - - res = 0; - for_all_symbols(i, sym) { - sym_calc_value(sym); - if ((sym->flags & SYMBOL_AUTO) || !sym->name) - continue; - if (sym->flags & SYMBOL_WRITE) { - if (sym->flags & SYMBOL_DEF_AUTO) { - /* - * symbol has old and new value, - * so compare them... - */ - switch (sym->type) { - case S_BOOLEAN: - case S_TRISTATE: - if (sym_get_tristate_value(sym) == - sym->def[S_DEF_AUTO].tri) - continue; - break; - case S_STRING: - case S_HEX: - case S_INT: - if (!strcmp(sym_get_string_value(sym), - sym->def[S_DEF_AUTO].val)) - continue; - break; - default: - break; - } - } else { - /* - * If there is no old value, only 'no' (unset) - * is allowed as new value. - */ - switch (sym->type) { - case S_BOOLEAN: - case S_TRISTATE: - if (sym_get_tristate_value(sym) == no) - continue; - break; - default: - break; - } - } - } else if (!(sym->flags & SYMBOL_DEF_AUTO)) - /* There is neither an old nor a new value. */ - continue; - /* else - * There is an old value, but no new value ('no' (unset) - * isn't saved in auto.conf, so the old value is always - * different from 'no'). - */ - - /* Replace all '_' and append ".h" */ - s = sym->name; - d = path; - while ((c = *s++)) { - c = tolower(c); - *d++ = (c == '_') ? '/' : c; - } - strcpy(d, ".h"); - - /* Assume directory path already exists. */ - fd = open(path, O_WRONLY | O_CREAT | O_TRUNC, 0644); - if (fd == -1) { - if (errno != ENOENT) { - res = 1; - break; - } - /* - * Create directory components, - * unless they exist already. - */ - d = path; - while ((d = strchr(d, '/'))) { - *d = 0; - if (stat(path, &sb) && mkdir(path, 0755)) { - res = 1; - goto out; - } - *d++ = '/'; - } - /* Try it again. */ - fd = open(path, O_WRONLY | O_CREAT | O_TRUNC, 0644); - if (fd == -1) { - res = 1; - break; - } - } - close(fd); - } -out: - if (chdir("../..")) - return 1; - - return res; -} - -int conf_write_autoconf(void) -{ - struct symbol *sym; - const char *name; - FILE *out, *tristate, *out_h; - int i; - - sym_clear_all_valid(); - - file_write_dep("include/config/auto.conf.cmd"); - - if (conf_split_config()) - return 1; - - out = fopen(".tmpconfig", "w"); - if (!out) - return 1; - - tristate = fopen(".tmpconfig_tristate", "w"); - if (!tristate) { - fclose(out); - return 1; - } - - out_h = fopen(".tmpconfig.h", "w"); - if (!out_h) { - fclose(out); - fclose(tristate); - return 1; - } - - conf_write_heading(out, &kconfig_printer_cb, NULL); - - conf_write_heading(tristate, &tristate_printer_cb, NULL); - - conf_write_heading(out_h, &header_printer_cb, NULL); - - for_all_symbols(i, sym) { - sym_calc_value(sym); - if (!sym->name) - continue; - if (!(sym->flags & SYMBOL_WRITE)) { - conf_write_symbol(out_h, sym, &header_printer_cb, NULL); - continue; - } - - /* write symbol to auto.conf, tristate and header files */ - conf_write_symbol(out, sym, &kconfig_printer_cb, (void *)1); - - conf_write_symbol(tristate, sym, &tristate_printer_cb, (void *)1); - - conf_write_symbol(out_h, sym, &header_printer_cb, NULL); - } - fclose(out); - fclose(tristate); - fclose(out_h); - - name = getenv("KCONFIG_AUTOHEADER"); - if (!name) - name = "include/generated/autoconf.h"; - if (rename(".tmpconfig.h", name)) - return 1; - name = getenv("KCONFIG_TRISTATE"); - if (!name) - name = "include/config/tristate.conf"; - if (rename(".tmpconfig_tristate", name)) - return 1; - name = conf_get_autoconfig_name(); - /* - * This must be the last step, kbuild has a dependency on auto.conf - * and this marks the successful completion of the previous steps. - */ - if (rename(".tmpconfig", name)) - return 1; - - return 0; -} - -static int sym_change_count; -static void (*conf_changed_callback)(void); - -void sym_set_change_count(int count) -{ - int _sym_change_count = sym_change_count; - sym_change_count = count; - if (conf_changed_callback && - (bool)_sym_change_count != (bool)count) - conf_changed_callback(); -} - -void sym_add_change_count(int count) -{ - sym_set_change_count(count + sym_change_count); -} - -bool conf_get_changed(void) -{ - return sym_change_count; -} - -void conf_set_changed_callback(void (*fn)(void)) -{ - conf_changed_callback = fn; -} - -static bool randomize_choice_values(struct symbol *csym) -{ - struct property *prop; - struct symbol *sym; - struct expr *e; - int cnt, def; - - /* - * If choice is mod then we may have more items selected - * and if no then no-one. - * In both cases stop. - */ - if (csym->curr.tri != yes) - return false; - - prop = sym_get_choice_prop(csym); - - /* count entries in choice block */ - cnt = 0; - expr_list_for_each_sym(prop->expr, e, sym) - cnt++; - - /* - * find a random value and set it to yes, - * set the rest to no so we have only one set - */ - def = (rand() % cnt); - - cnt = 0; - expr_list_for_each_sym(prop->expr, e, sym) { - if (def == cnt++) { - sym->def[S_DEF_USER].tri = yes; - csym->def[S_DEF_USER].val = sym; - } - else { - sym->def[S_DEF_USER].tri = no; - } - sym->flags |= SYMBOL_DEF_USER; - /* clear VALID to get value calculated */ - sym->flags &= ~SYMBOL_VALID; - } - csym->flags |= SYMBOL_DEF_USER; - /* clear VALID to get value calculated */ - csym->flags &= ~(SYMBOL_VALID); - - return true; -} - -void set_all_choice_values(struct symbol *csym) -{ - struct property *prop; - struct symbol *sym; - struct expr *e; - - prop = sym_get_choice_prop(csym); - - /* - * Set all non-assinged choice values to no - */ - expr_list_for_each_sym(prop->expr, e, sym) { - if (!sym_has_value(sym)) - sym->def[S_DEF_USER].tri = no; - } - csym->flags |= SYMBOL_DEF_USER; - /* clear VALID to get value calculated */ - csym->flags &= ~(SYMBOL_VALID | SYMBOL_NEED_SET_CHOICE_VALUES); -} - -bool conf_set_all_new_symbols(enum conf_def_mode mode) -{ - struct symbol *sym, *csym; - int i, cnt, pby, pty, ptm; /* pby: probability of boolean = y - * pty: probability of tristate = y - * ptm: probability of tristate = m - */ - - pby = 50; pty = ptm = 33; /* can't go as the default in switch-case - * below, otherwise gcc whines about - * -Wmaybe-uninitialized */ - if (mode == def_random) { - int n, p[3]; - char *env = getenv("KCONFIG_PROBABILITY"); - n = 0; - while( env && *env ) { - char *endp; - int tmp = strtol( env, &endp, 10 ); - if( tmp >= 0 && tmp <= 100 ) { - p[n++] = tmp; - } else { - errno = ERANGE; - perror( "KCONFIG_PROBABILITY" ); - exit( 1 ); - } - env = (*endp == ':') ? endp+1 : endp; - if( n >=3 ) { - break; - } - } - switch( n ) { - case 1: - pby = p[0]; ptm = pby/2; pty = pby-ptm; - break; - case 2: - pty = p[0]; ptm = p[1]; pby = pty + ptm; - break; - case 3: - pby = p[0]; pty = p[1]; ptm = p[2]; - break; - } - - if( pty+ptm > 100 ) { - errno = ERANGE; - perror( "KCONFIG_PROBABILITY" ); - exit( 1 ); - } - } - bool has_changed = false; - - for_all_symbols(i, sym) { - if (sym_has_value(sym) || (sym->flags & SYMBOL_VALID)) - continue; - switch (sym_get_type(sym)) { - case S_BOOLEAN: - case S_TRISTATE: - has_changed = true; - switch (mode) { - case def_yes: - sym->def[S_DEF_USER].tri = yes; - break; - case def_mod: - sym->def[S_DEF_USER].tri = mod; - break; - case def_no: - if (sym->flags & SYMBOL_ALLNOCONFIG_Y) - sym->def[S_DEF_USER].tri = yes; - else - sym->def[S_DEF_USER].tri = no; - break; - case def_random: - sym->def[S_DEF_USER].tri = no; - cnt = rand() % 100; - if (sym->type == S_TRISTATE) { - if (cnt < pty) - sym->def[S_DEF_USER].tri = yes; - else if (cnt < (pty+ptm)) - sym->def[S_DEF_USER].tri = mod; - } else if (cnt < pby) - sym->def[S_DEF_USER].tri = yes; - break; - default: - continue; - } - if (!(sym_is_choice(sym) && mode == def_random)) - sym->flags |= SYMBOL_DEF_USER; - break; - default: - break; - } - - } - - sym_clear_all_valid(); - - /* - * We have different type of choice blocks. - * If curr.tri equals to mod then we can select several - * choice symbols in one block. - * In this case we do nothing. - * If curr.tri equals yes then only one symbol can be - * selected in a choice block and we set it to yes, - * and the rest to no. - */ - if (mode != def_random) { - for_all_symbols(i, csym) { - if ((sym_is_choice(csym) && !sym_has_value(csym)) || - sym_is_choice_value(csym)) - csym->flags |= SYMBOL_NEED_SET_CHOICE_VALUES; - } - } - - for_all_symbols(i, csym) { - if (sym_has_value(csym) || !sym_is_choice(csym)) - continue; - - sym_calc_value(csym); - if (mode == def_random) - has_changed = randomize_choice_values(csym); - else { - set_all_choice_values(csym); - has_changed = true; - } - } - - return has_changed; -} diff --git a/payloads/external/SeaBIOS/scripts/kconfig/expr.c b/payloads/external/SeaBIOS/scripts/kconfig/expr.c deleted file mode 100644 index d6626521..00000000 --- a/payloads/external/SeaBIOS/scripts/kconfig/expr.c +++ /dev/null @@ -1,1168 +0,0 @@ -/* - * Copyright (C) 2002 Roman Zippel <zippel@linux-m68k.org> - * Released under the terms of the GNU GPL v2.0. - */ - -#include <stdio.h> -#include <stdlib.h> -#include <string.h> - -#include "lkc.h" - -#define DEBUG_EXPR 0 - -struct expr *expr_alloc_symbol(struct symbol *sym) -{ - struct expr *e = xcalloc(1, sizeof(*e)); - e->type = E_SYMBOL; - e->left.sym = sym; - return e; -} - -struct expr *expr_alloc_one(enum expr_type type, struct expr *ce) -{ - struct expr *e = xcalloc(1, sizeof(*e)); - e->type = type; - e->left.expr = ce; - return e; -} - -struct expr *expr_alloc_two(enum expr_type type, struct expr *e1, struct expr *e2) -{ - struct expr *e = xcalloc(1, sizeof(*e)); - e->type = type; - e->left.expr = e1; - e->right.expr = e2; - return e; -} - -struct expr *expr_alloc_comp(enum expr_type type, struct symbol *s1, struct symbol *s2) -{ - struct expr *e = xcalloc(1, sizeof(*e)); - e->type = type; - e->left.sym = s1; - e->right.sym = s2; - return e; -} - -struct expr *expr_alloc_and(struct expr *e1, struct expr *e2) -{ - if (!e1) - return e2; - return e2 ? expr_alloc_two(E_AND, e1, e2) : e1; -} - -struct expr *expr_alloc_or(struct expr *e1, struct expr *e2) -{ - if (!e1) - return e2; - return e2 ? expr_alloc_two(E_OR, e1, e2) : e1; -} - -struct expr *expr_copy(const struct expr *org) -{ - struct expr *e; - - if (!org) - return NULL; - - e = xmalloc(sizeof(*org)); - memcpy(e, org, sizeof(*org)); - switch (org->type) { - case E_SYMBOL: - e->left = org->left; - break; - case E_NOT: - e->left.expr = expr_copy(org->left.expr); - break; - case E_EQUAL: - case E_UNEQUAL: - e->left.sym = org->left.sym; - e->right.sym = org->right.sym; - break; - case E_AND: - case E_OR: - case E_LIST: - e->left.expr = expr_copy(org->left.expr); - e->right.expr = expr_copy(org->right.expr); - break; - default: - printf("can't copy type %d\n", e->type); - free(e); - e = NULL; - break; - } - - return e; -} - -void expr_free(struct expr *e) -{ - if (!e) - return; - - switch (e->type) { - case E_SYMBOL: - break; - case E_NOT: - expr_free(e->left.expr); - return; - case E_EQUAL: - case E_UNEQUAL: - break; - case E_OR: - case E_AND: - expr_free(e->left.expr); - expr_free(e->right.expr); - break; - default: - printf("how to free type %d?\n", e->type); - break; - } - free(e); -} - -static int trans_count; - -#define e1 (*ep1) -#define e2 (*ep2) - -static void __expr_eliminate_eq(enum expr_type type, struct expr **ep1, struct expr **ep2) -{ - if (e1->type == type) { - __expr_eliminate_eq(type, &e1->left.expr, &e2); - __expr_eliminate_eq(type, &e1->right.expr, &e2); - return; - } - if (e2->type == type) { - __expr_eliminate_eq(type, &e1, &e2->left.expr); - __expr_eliminate_eq(type, &e1, &e2->right.expr); - return; - } - if (e1->type == E_SYMBOL && e2->type == E_SYMBOL && - e1->left.sym == e2->left.sym && - (e1->left.sym == &symbol_yes || e1->left.sym == &symbol_no)) - return; - if (!expr_eq(e1, e2)) - return; - trans_count++; - expr_free(e1); expr_free(e2); - switch (type) { - case E_OR: - e1 = expr_alloc_symbol(&symbol_no); - e2 = expr_alloc_symbol(&symbol_no); - break; - case E_AND: - e1 = expr_alloc_symbol(&symbol_yes); - e2 = expr_alloc_symbol(&symbol_yes); - break; - default: - ; - } -} - -void expr_eliminate_eq(struct expr **ep1, struct expr **ep2) -{ - if (!e1 || !e2) - return; - switch (e1->type) { - case E_OR: - case E_AND: - __expr_eliminate_eq(e1->type, ep1, ep2); - default: - ; - } - if (e1->type != e2->type) switch (e2->type) { - case E_OR: - case E_AND: - __expr_eliminate_eq(e2->type, ep1, ep2); - default: - ; - } - e1 = expr_eliminate_yn(e1); - e2 = expr_eliminate_yn(e2); -} - -#undef e1 -#undef e2 - -int expr_eq(struct expr *e1, struct expr *e2) -{ - int res, old_count; - - if (e1->type != e2->type) - return 0; - switch (e1->type) { - case E_EQUAL: - case E_UNEQUAL: - return e1->left.sym == e2->left.sym && e1->right.sym == e2->right.sym; - case E_SYMBOL: - return e1->left.sym == e2->left.sym; - case E_NOT: - return expr_eq(e1->left.expr, e2->left.expr); - case E_AND: - case E_OR: - e1 = expr_copy(e1); - e2 = expr_copy(e2); - old_count = trans_count; - expr_eliminate_eq(&e1, &e2); - res = (e1->type == E_SYMBOL && e2->type == E_SYMBOL && - e1->left.sym == e2->left.sym); - expr_free(e1); - expr_free(e2); - trans_count = old_count; - return res; - case E_LIST: - case E_RANGE: - case E_NONE: - /* panic */; - } - - if (DEBUG_EXPR) { - expr_fprint(e1, stdout); - printf(" = "); - expr_fprint(e2, stdout); - printf(" ?\n"); - } - - return 0; -} - -struct expr *expr_eliminate_yn(struct expr *e) -{ - struct expr *tmp; - - if (e) switch (e->type) { - case E_AND: - e->left.expr = expr_eliminate_yn(e->left.expr); - e->right.expr = expr_eliminate_yn(e->right.expr); - if (e->left.expr->type == E_SYMBOL) { - if (e->left.expr->left.sym == &symbol_no) { - expr_free(e->left.expr); - expr_free(e->right.expr); - e->type = E_SYMBOL; - e->left.sym = &symbol_no; - e->right.expr = NULL; - return e; - } else if (e->left.expr->left.sym == &symbol_yes) { - free(e->left.expr); - tmp = e->right.expr; - *e = *(e->right.expr); - free(tmp); - return e; - } - } - if (e->right.expr->type == E_SYMBOL) { - if (e->right.expr->left.sym == &symbol_no) { - expr_free(e->left.expr); - expr_free(e->right.expr); - e->type = E_SYMBOL; - e->left.sym = &symbol_no; - e->right.expr = NULL; - return e; - } else if (e->right.expr->left.sym == &symbol_yes) { - free(e->right.expr); - tmp = e->left.expr; - *e = *(e->left.expr); - free(tmp); - return e; - } - } - break; - case E_OR: - e->left.expr = expr_eliminate_yn(e->left.expr); - e->right.expr = expr_eliminate_yn(e->right.expr); - if (e->left.expr->type == E_SYMBOL) { - if (e->left.expr->left.sym == &symbol_no) { - free(e->left.expr); - tmp = e->right.expr; - *e = *(e->right.expr); - free(tmp); - return e; - } else if (e->left.expr->left.sym == &symbol_yes) { - expr_free(e->left.expr); - expr_free(e->right.expr); - e->type = E_SYMBOL; - e->left.sym = &symbol_yes; - e->right.expr = NULL; - return e; - } - } - if (e->right.expr->type == E_SYMBOL) { - if (e->right.expr->left.sym == &symbol_no) { - free(e->right.expr); - tmp = e->left.expr; - *e = *(e->left.expr); - free(tmp); - return e; - } else if (e->right.expr->left.sym == &symbol_yes) { - expr_free(e->left.expr); - expr_free(e->right.expr); - e->type = E_SYMBOL; - e->left.sym = &symbol_yes; - e->right.expr = NULL; - return e; - } - } - break; - default: - ; - } - return e; -} - -/* - * bool FOO!=n => FOO - */ -struct expr *expr_trans_bool(struct expr *e) -{ - if (!e) - return NULL; - switch (e->type) { - case E_AND: - case E_OR: - case E_NOT: - e->left.expr = expr_trans_bool(e->left.expr); - e->right.expr = expr_trans_bool(e->right.expr); - break; - case E_UNEQUAL: - // FOO!=n -> FOO - if (e->left.sym->type == S_TRISTATE) { - if (e->right.sym == &symbol_no) { - e->type = E_SYMBOL; - e->right.sym = NULL; - } - } - break; - default: - ; - } - return e; -} - -/* - * e1 || e2 -> ? - */ -static struct expr *expr_join_or(struct expr *e1, struct expr *e2) -{ - struct expr *tmp; - struct symbol *sym1, *sym2; - - if (expr_eq(e1, e2)) - return expr_copy(e1); - if (e1->type != E_EQUAL && e1->type != E_UNEQUAL && e1->type != E_SYMBOL && e1->type != E_NOT) - return NULL; - if (e2->type != E_EQUAL && e2->type != E_UNEQUAL && e2->type != E_SYMBOL && e2->type != E_NOT) - return NULL; - if (e1->type == E_NOT) { - tmp = e1->left.expr; - if (tmp->type != E_EQUAL && tmp->type != E_UNEQUAL && tmp->type != E_SYMBOL) - return NULL; - sym1 = tmp->left.sym; - } else - sym1 = e1->left.sym; - if (e2->type == E_NOT) { - if (e2->left.expr->type != E_SYMBOL) - return NULL; - sym2 = e2->left.expr->left.sym; - } else - sym2 = e2->left.sym; - if (sym1 != sym2) - return NULL; - if (sym1->type != S_BOOLEAN && sym1->type != S_TRISTATE) - return NULL; - if (sym1->type == S_TRISTATE) { - if (e1->type == E_EQUAL && e2->type == E_EQUAL && - ((e1->right.sym == &symbol_yes && e2->right.sym == &symbol_mod) || - (e1->right.sym == &symbol_mod && e2->right.sym == &symbol_yes))) { - // (a='y') || (a='m') -> (a!='n') - return expr_alloc_comp(E_UNEQUAL, sym1, &symbol_no); - } - if (e1->type == E_EQUAL && e2->type == E_EQUAL && - ((e1->right.sym == &symbol_yes && e2->right.sym == &symbol_no) || - (e1->right.sym == &symbol_no && e2->right.sym == &symbol_yes))) { - // (a='y') || (a='n') -> (a!='m') - return expr_alloc_comp(E_UNEQUAL, sym1, &symbol_mod); - } - if (e1->type == E_EQUAL && e2->type == E_EQUAL && - ((e1->right.sym == &symbol_mod && e2->right.sym == &symbol_no) || - (e1->right.sym == &symbol_no && e2->right.sym == &symbol_mod))) { - // (a='m') || (a='n') -> (a!='y') - return expr_alloc_comp(E_UNEQUAL, sym1, &symbol_yes); - } - } - if (sym1->type == S_BOOLEAN && sym1 == sym2) { - if ((e1->type == E_NOT && e1->left.expr->type == E_SYMBOL && e2->type == E_SYMBOL) || - (e2->type == E_NOT && e2->left.expr->type == E_SYMBOL && e1->type == E_SYMBOL)) - return expr_alloc_symbol(&symbol_yes); - } - - if (DEBUG_EXPR) { - printf("optimize ("); - expr_fprint(e1, stdout); - printf(") || ("); - expr_fprint(e2, stdout); - printf(")?\n"); - } - return NULL; -} - -static struct expr *expr_join_and(struct expr *e1, struct expr *e2) -{ - struct expr *tmp; - struct symbol *sym1, *sym2; - - if (expr_eq(e1, e2)) - return expr_copy(e1); - if (e1->type != E_EQUAL && e1->type != E_UNEQUAL && e1->type != E_SYMBOL && e1->type != E_NOT) - return NULL; - if (e2->type != E_EQUAL && e2->type != E_UNEQUAL && e2->type != E_SYMBOL && e2->type != E_NOT) - return NULL; - if (e1->type == E_NOT) { - tmp = e1->left.expr; - if (tmp->type != E_EQUAL && tmp->type != E_UNEQUAL && tmp->type != E_SYMBOL) - return NULL; - sym1 = tmp->left.sym; - } else - sym1 = e1->left.sym; - if (e2->type == E_NOT) { - if (e2->left.expr->type != E_SYMBOL) - return NULL; - sym2 = e2->left.expr->left.sym; - } else - sym2 = e2->left.sym; - if (sym1 != sym2) - return NULL; - if (sym1->type != S_BOOLEAN && sym1->type != S_TRISTATE) - return NULL; - - if ((e1->type == E_SYMBOL && e2->type == E_EQUAL && e2->right.sym == &symbol_yes) || - (e2->type == E_SYMBOL && e1->type == E_EQUAL && e1->right.sym == &symbol_yes)) - // (a) && (a='y') -> (a='y') - return expr_alloc_comp(E_EQUAL, sym1, &symbol_yes); - - if ((e1->type == E_SYMBOL && e2->type == E_UNEQUAL && e2->right.sym == &symbol_no) || - (e2->type == E_SYMBOL && e1->type == E_UNEQUAL && e1->right.sym == &symbol_no)) - // (a) && (a!='n') -> (a) - return expr_alloc_symbol(sym1); - - if ((e1->type == E_SYMBOL && e2->type == E_UNEQUAL && e2->right.sym == &symbol_mod) || - (e2->type == E_SYMBOL && e1->type == E_UNEQUAL && e1->right.sym == &symbol_mod)) - // (a) && (a!='m') -> (a='y') - return expr_alloc_comp(E_EQUAL, sym1, &symbol_yes); - - if (sym1->type == S_TRISTATE) { - if (e1->type == E_EQUAL && e2->type == E_UNEQUAL) { - // (a='b') && (a!='c') -> 'b'='c' ? 'n' : a='b' - sym2 = e1->right.sym; - if ((e2->right.sym->flags & SYMBOL_CONST) && (sym2->flags & SYMBOL_CONST)) - return sym2 != e2->right.sym ? expr_alloc_comp(E_EQUAL, sym1, sym2) - : expr_alloc_symbol(&symbol_no); - } - if (e1->type == E_UNEQUAL && e2->type == E_EQUAL) { - // (a='b') && (a!='c') -> 'b'='c' ? 'n' : a='b' - sym2 = e2->right.sym; - if ((e1->right.sym->flags & SYMBOL_CONST) && (sym2->flags & SYMBOL_CONST)) - return sym2 != e1->right.sym ? expr_alloc_comp(E_EQUAL, sym1, sym2) - : expr_alloc_symbol(&symbol_no); - } - if (e1->type == E_UNEQUAL && e2->type == E_UNEQUAL && - ((e1->right.sym == &symbol_yes && e2->right.sym == &symbol_no) || - (e1->right.sym == &symbol_no && e2->right.sym == &symbol_yes))) - // (a!='y') && (a!='n') -> (a='m') - return expr_alloc_comp(E_EQUAL, sym1, &symbol_mod); - - if (e1->type == E_UNEQUAL && e2->type == E_UNEQUAL && - ((e1->right.sym == &symbol_yes && e2->right.sym == &symbol_mod) || - (e1->right.sym == &symbol_mod && e2->right.sym == &symbol_yes))) - // (a!='y') && (a!='m') -> (a='n') - return expr_alloc_comp(E_EQUAL, sym1, &symbol_no); - - if (e1->type == E_UNEQUAL && e2->type == E_UNEQUAL && - ((e1->right.sym == &symbol_mod && e2->right.sym == &symbol_no) || - (e1->right.sym == &symbol_no && e2->right.sym == &symbol_mod))) - // (a!='m') && (a!='n') -> (a='m') - return expr_alloc_comp(E_EQUAL, sym1, &symbol_yes); - - if ((e1->type == E_SYMBOL && e2->type == E_EQUAL && e2->right.sym == &symbol_mod) || - (e2->type == E_SYMBOL && e1->type == E_EQUAL && e1->right.sym == &symbol_mod) || - (e1->type == E_SYMBOL && e2->type == E_UNEQUAL && e2->right.sym == &symbol_yes) || - (e2->type == E_SYMBOL && e1->type == E_UNEQUAL && e1->right.sym == &symbol_yes)) - return NULL; - } - - if (DEBUG_EXPR) { - printf("optimize ("); - expr_fprint(e1, stdout); - printf(") && ("); - expr_fprint(e2, stdout); - printf(")?\n"); - } - return NULL; -} - -static void expr_eliminate_dups1(enum expr_type type, struct expr **ep1, struct expr **ep2) -{ -#define e1 (*ep1) -#define e2 (*ep2) - struct expr *tmp; - - if (e1->type == type) { - expr_eliminate_dups1(type, &e1->left.expr, &e2); - expr_eliminate_dups1(type, &e1->right.expr, &e2); - return; - } - if (e2->type == type) { - expr_eliminate_dups1(type, &e1, &e2->left.expr); - expr_eliminate_dups1(type, &e1, &e2->right.expr); - return; - } - if (e1 == e2) - return; - - switch (e1->type) { - case E_OR: case E_AND: - expr_eliminate_dups1(e1->type, &e1, &e1); - default: - ; - } - - switch (type) { - case E_OR: - tmp = expr_join_or(e1, e2); - if (tmp) { - expr_free(e1); expr_free(e2); - e1 = expr_alloc_symbol(&symbol_no); - e2 = tmp; - trans_count++; - } - break; - case E_AND: - tmp = expr_join_and(e1, e2); - if (tmp) { - expr_free(e1); expr_free(e2); - e1 = expr_alloc_symbol(&symbol_yes); - e2 = tmp; - trans_count++; - } - break; - default: - ; - } -#undef e1 -#undef e2 -} - -static void expr_eliminate_dups2(enum expr_type type, struct expr **ep1, struct expr **ep2) -{ -#define e1 (*ep1) -#define e2 (*ep2) - struct expr *tmp, *tmp1, *tmp2; - - if (e1->type == type) { - expr_eliminate_dups2(type, &e1->left.expr, &e2); - expr_eliminate_dups2(type, &e1->right.expr, &e2); - return; - } - if (e2->type == type) { - expr_eliminate_dups2(type, &e1, &e2->left.expr); - expr_eliminate_dups2(type, &e1, &e2->right.expr); - } - if (e1 == e2) - return; - - switch (e1->type) { - case E_OR: - expr_eliminate_dups2(e1->type, &e1, &e1); - // (FOO || BAR) && (!FOO && !BAR) -> n - tmp1 = expr_transform(expr_alloc_one(E_NOT, expr_copy(e1))); - tmp2 = expr_copy(e2); - tmp = expr_extract_eq_and(&tmp1, &tmp2); - if (expr_is_yes(tmp1)) { - expr_free(e1); - e1 = expr_alloc_symbol(&symbol_no); - trans_count++; - } - expr_free(tmp2); - expr_free(tmp1); - expr_free(tmp); - break; - case E_AND: - expr_eliminate_dups2(e1->type, &e1, &e1); - // (FOO && BAR) || (!FOO || !BAR) -> y - tmp1 = expr_transform(expr_alloc_one(E_NOT, expr_copy(e1))); - tmp2 = expr_copy(e2); - tmp = expr_extract_eq_or(&tmp1, &tmp2); - if (expr_is_no(tmp1)) { - expr_free(e1); - e1 = expr_alloc_symbol(&symbol_yes); - trans_count++; - } - expr_free(tmp2); - expr_free(tmp1); - expr_free(tmp); - break; - default: - ; - } -#undef e1 -#undef e2 -} - -struct expr *expr_eliminate_dups(struct expr *e) -{ - int oldcount; - if (!e) - return e; - - oldcount = trans_count; - while (1) { - trans_count = 0; - switch (e->type) { - case E_OR: case E_AND: - expr_eliminate_dups1(e->type, &e, &e); - expr_eliminate_dups2(e->type, &e, &e); - default: - ; - } - if (!trans_count) - break; - e = expr_eliminate_yn(e); - } - trans_count = oldcount; - return e; -} - -struct expr *expr_transform(struct expr *e) -{ - struct expr *tmp; - - if (!e) - return NULL; - switch (e->type) { - case E_EQUAL: - case E_UNEQUAL: - case E_SYMBOL: - case E_LIST: - break; - default: - e->left.expr = expr_transform(e->left.expr); - e->right.expr = expr_transform(e->right.expr); - } - - switch (e->type) { - case E_EQUAL: - if (e->left.sym->type != S_BOOLEAN) - break; - if (e->right.sym == &symbol_no) { - e->type = E_NOT; - e->left.expr = expr_alloc_symbol(e->left.sym); - e->right.sym = NULL; - break; - } - if (e->right.sym == &symbol_mod) { - printf("boolean symbol %s tested for 'm'? test forced to 'n'\n", e->left.sym->name); - e->type = E_SYMBOL; - e->left.sym = &symbol_no; - e->right.sym = NULL; - break; - } - if (e->right.sym == &symbol_yes) { - e->type = E_SYMBOL; - e->right.sym = NULL; - break; - } - break; - case E_UNEQUAL: - if (e->left.sym->type != S_BOOLEAN) - break; - if (e->right.sym == &symbol_no) { - e->type = E_SYMBOL; - e->right.sym = NULL; - break; - } - if (e->right.sym == &symbol_mod) { - printf("boolean symbol %s tested for 'm'? test forced to 'y'\n", e->left.sym->name); - e->type = E_SYMBOL; - e->left.sym = &symbol_yes; - e->right.sym = NULL; - break; - } - if (e->right.sym == &symbol_yes) { - e->type = E_NOT; - e->left.expr = expr_alloc_symbol(e->left.sym); - e->right.sym = NULL; - break; - } - break; - case E_NOT: - switch (e->left.expr->type) { - case E_NOT: - // !!a -> a - tmp = e->left.expr->left.expr; - free(e->left.expr); - free(e); - e = tmp; - e = expr_transform(e); - break; - case E_EQUAL: - case E_UNEQUAL: - // !a='x' -> a!='x' - tmp = e->left.expr; - free(e); - e = tmp; - e->type = e->type == E_EQUAL ? E_UNEQUAL : E_EQUAL; - break; - case E_OR: - // !(a || b) -> !a && !b - tmp = e->left.expr; - e->type = E_AND; - e->right.expr = expr_alloc_one(E_NOT, tmp->right.expr); - tmp->type = E_NOT; - tmp->right.expr = NULL; - e = expr_transform(e); - break; - case E_AND: - // !(a && b) -> !a || !b - tmp = e->left.expr; - e->type = E_OR; - e->right.expr = expr_alloc_one(E_NOT, tmp->right.expr); - tmp->type = E_NOT; - tmp->right.expr = NULL; - e = expr_transform(e); - break; - case E_SYMBOL: - if (e->left.expr->left.sym == &symbol_yes) { - // !'y' -> 'n' - tmp = e->left.expr; - free(e); - e = tmp; - e->type = E_SYMBOL; - e->left.sym = &symbol_no; - break; - } - if (e->left.expr->left.sym == &symbol_mod) { - // !'m' -> 'm' - tmp = e->left.expr; - free(e); - e = tmp; - e->type = E_SYMBOL; - e->left.sym = &symbol_mod; - break; - } - if (e->left.expr->left.sym == &symbol_no) { - // !'n' -> 'y' - tmp = e->left.expr; - free(e); - e = tmp; - e->type = E_SYMBOL; - e->left.sym = &symbol_yes; - break; - } - break; - default: - ; - } - break; - default: - ; - } - return e; -} - -int expr_contains_symbol(struct expr *dep, struct symbol *sym) -{ - if (!dep) - return 0; - - switch (dep->type) { - case E_AND: - case E_OR: - return expr_contains_symbol(dep->left.expr, sym) || - expr_contains_symbol(dep->right.expr, sym); - case E_SYMBOL: - return dep->left.sym == sym; - case E_EQUAL: - case E_UNEQUAL: - return dep->left.sym == sym || - dep->right.sym == sym; - case E_NOT: - return expr_contains_symbol(dep->left.expr, sym); - default: - ; - } - return 0; -} - -bool expr_depends_symbol(struct expr *dep, struct symbol *sym) -{ - if (!dep) - return false; - - switch (dep->type) { - case E_AND: - return expr_depends_symbol(dep->left.expr, sym) || - expr_depends_symbol(dep->right.expr, sym); - case E_SYMBOL: - return dep->left.sym == sym; - case E_EQUAL: - if (dep->left.sym == sym) { - if (dep->right.sym == &symbol_yes || dep->right.sym == &symbol_mod) - return true; - } - break; - case E_UNEQUAL: - if (dep->left.sym == sym) { - if (dep->right.sym == &symbol_no) - return true; - } - break; - default: - ; - } - return false; -} - -struct expr *expr_extract_eq_and(struct expr **ep1, struct expr **ep2) -{ - struct expr *tmp = NULL; - expr_extract_eq(E_AND, &tmp, ep1, ep2); - if (tmp) { - *ep1 = expr_eliminate_yn(*ep1); - *ep2 = expr_eliminate_yn(*ep2); - } - return tmp; -} - -struct expr *expr_extract_eq_or(struct expr **ep1, struct expr **ep2) -{ - struct expr *tmp = NULL; - expr_extract_eq(E_OR, &tmp, ep1, ep2); - if (tmp) { - *ep1 = expr_eliminate_yn(*ep1); - *ep2 = expr_eliminate_yn(*ep2); - } - return tmp; -} - -void expr_extract_eq(enum expr_type type, struct expr **ep, struct expr **ep1, struct expr **ep2) -{ -#define e1 (*ep1) -#define e2 (*ep2) - if (e1->type == type) { - expr_extract_eq(type, ep, &e1->left.expr, &e2); - expr_extract_eq(type, ep, &e1->right.expr, &e2); - return; - } - if (e2->type == type) { - expr_extract_eq(type, ep, ep1, &e2->left.expr); - expr_extract_eq(type, ep, ep1, &e2->right.expr); - return; - } - if (expr_eq(e1, e2)) { - *ep = *ep ? expr_alloc_two(type, *ep, e1) : e1; - expr_free(e2); - if (type == E_AND) { - e1 = expr_alloc_symbol(&symbol_yes); - e2 = expr_alloc_symbol(&symbol_yes); - } else if (type == E_OR) { - e1 = expr_alloc_symbol(&symbol_no); - e2 = expr_alloc_symbol(&symbol_no); - } - } -#undef e1 -#undef e2 -} - -struct expr *expr_trans_compare(struct expr *e, enum expr_type type, struct symbol *sym) -{ - struct expr *e1, *e2; - - if (!e) { - e = expr_alloc_symbol(sym); - if (type == E_UNEQUAL) - e = expr_alloc_one(E_NOT, e); - return e; - } - switch (e->type) { - case E_AND: - e1 = expr_trans_compare(e->left.expr, E_EQUAL, sym); - e2 = expr_trans_compare(e->right.expr, E_EQUAL, sym); - if (sym == &symbol_yes) - e = expr_alloc_two(E_AND, e1, e2); - if (sym == &symbol_no) - e = expr_alloc_two(E_OR, e1, e2); - if (type == E_UNEQUAL) - e = expr_alloc_one(E_NOT, e); - return e; - case E_OR: - e1 = expr_trans_compare(e->left.expr, E_EQUAL, sym); - e2 = expr_trans_compare(e->right.expr, E_EQUAL, sym); - if (sym == &symbol_yes) - e = expr_alloc_two(E_OR, e1, e2); - if (sym == &symbol_no) - e = expr_alloc_two(E_AND, e1, e2); - if (type == E_UNEQUAL) - e = expr_alloc_one(E_NOT, e); - return e; - case E_NOT: - return expr_trans_compare(e->left.expr, type == E_EQUAL ? E_UNEQUAL : E_EQUAL, sym); - case E_UNEQUAL: - case E_EQUAL: - if (type == E_EQUAL) { - if (sym == &symbol_yes) - return expr_copy(e); - if (sym == &symbol_mod) - return expr_alloc_symbol(&symbol_no); - if (sym == &symbol_no) - return expr_alloc_one(E_NOT, expr_copy(e)); - } else { - if (sym == &symbol_yes) - return expr_alloc_one(E_NOT, expr_copy(e)); - if (sym == &symbol_mod) - return expr_alloc_symbol(&symbol_yes); - if (sym == &symbol_no) - return expr_copy(e); - } - break; - case E_SYMBOL: - return expr_alloc_comp(type, e->left.sym, sym); - case E_LIST: - case E_RANGE: - case E_NONE: - /* panic */; - } - return NULL; -} - -tristate expr_calc_value(struct expr *e) -{ - tristate val1, val2; - const char *str1, *str2; - - if (!e) - return yes; - - switch (e->type) { - case E_SYMBOL: - sym_calc_value(e->left.sym); - return e->left.sym->curr.tri; - case E_AND: - val1 = expr_calc_value(e->left.expr); - val2 = expr_calc_value(e->right.expr); - return EXPR_AND(val1, val2); - case E_OR: - val1 = expr_calc_value(e->left.expr); - val2 = expr_calc_value(e->right.expr); - return EXPR_OR(val1, val2); - case E_NOT: - val1 = expr_calc_value(e->left.expr); - return EXPR_NOT(val1); - case E_EQUAL: - sym_calc_value(e->left.sym); - sym_calc_value(e->right.sym); - str1 = sym_get_string_value(e->left.sym); - str2 = sym_get_string_value(e->right.sym); - return !strcmp(str1, str2) ? yes : no; - case E_UNEQUAL: - sym_calc_value(e->left.sym); - sym_calc_value(e->right.sym); - str1 = sym_get_string_value(e->left.sym); - str2 = sym_get_string_value(e->right.sym); - return !strcmp(str1, str2) ? no : yes; - default: - printf("expr_calc_value: %d?\n", e->type); - return no; - } -} - -int expr_compare_type(enum expr_type t1, enum expr_type t2) -{ -#if 0 - return 1; -#else - if (t1 == t2) - return 0; - switch (t1) { - case E_EQUAL: - case E_UNEQUAL: - if (t2 == E_NOT) - return 1; - case E_NOT: - if (t2 == E_AND) - return 1; - case E_AND: - if (t2 == E_OR) - return 1; - case E_OR: - if (t2 == E_LIST) - return 1; - case E_LIST: - if (t2 == 0) - return 1; - default: - return -1; - } - printf("[%dgt%d?]", t1, t2); - return 0; -#endif -} - -static inline struct expr * -expr_get_leftmost_symbol(const struct expr *e) -{ - - if (e == NULL) - return NULL; - - while (e->type != E_SYMBOL) - e = e->left.expr; - - return expr_copy(e); -} - -/* - * Given expression `e1' and `e2', returns the leaf of the longest - * sub-expression of `e1' not containing 'e2. - */ -struct expr *expr_simplify_unmet_dep(struct expr *e1, struct expr *e2) -{ - struct expr *ret; - - switch (e1->type) { - case E_OR: - return expr_alloc_and( - expr_simplify_unmet_dep(e1->left.expr, e2), - expr_simplify_unmet_dep(e1->right.expr, e2)); - case E_AND: { - struct expr *e; - e = expr_alloc_and(expr_copy(e1), expr_copy(e2)); - e = expr_eliminate_dups(e); - ret = (!expr_eq(e, e1)) ? e1 : NULL; - expr_free(e); - break; - } - default: - ret = e1; - break; - } - - return expr_get_leftmost_symbol(ret); -} - -void expr_print(struct expr *e, void (*fn)(void *, struct symbol *, const char *), void *data, int prevtoken) -{ - if (!e) { - fn(data, NULL, "y"); - return; - } - - if (expr_compare_type(prevtoken, e->type) > 0) - fn(data, NULL, "("); - switch (e->type) { - case E_SYMBOL: - if (e->left.sym->name) - fn(data, e->left.sym, e->left.sym->name); - else - fn(data, NULL, "<choice>"); - break; - case E_NOT: - fn(data, NULL, "!"); - expr_print(e->left.expr, fn, data, E_NOT); - break; - case E_EQUAL: - if (e->left.sym->name) - fn(data, e->left.sym, e->left.sym->name); - else - fn(data, NULL, "<choice>"); - fn(data, NULL, "="); - fn(data, e->right.sym, e->right.sym->name); - break; - case E_UNEQUAL: - if (e->left.sym->name) - fn(data, e->left.sym, e->left.sym->name); - else - fn(data, NULL, "<choice>"); - fn(data, NULL, "!="); - fn(data, e->right.sym, e->right.sym->name); - break; - case E_OR: - expr_print(e->left.expr, fn, data, E_OR); - fn(data, NULL, " || "); - expr_print(e->right.expr, fn, data, E_OR); - break; - case E_AND: - expr_print(e->left.expr, fn, data, E_AND); - fn(data, NULL, " && "); - expr_print(e->right.expr, fn, data, E_AND); - break; - case E_LIST: - fn(data, e->right.sym, e->right.sym->name); - if (e->left.expr) { - fn(data, NULL, " ^ "); - expr_print(e->left.expr, fn, data, E_LIST); - } - break; - case E_RANGE: - fn(data, NULL, "["); - fn(data, e->left.sym, e->left.sym->name); - fn(data, NULL, " "); - fn(data, e->right.sym, e->right.sym->name); - fn(data, NULL, "]"); - break; - default: - { - char buf[32]; - sprintf(buf, "<unknown type %d>", e->type); - fn(data, NULL, buf); - break; - } - } - if (expr_compare_type(prevtoken, e->type) > 0) - fn(data, NULL, ")"); -} - -static void expr_print_file_helper(void *data, struct symbol *sym, const char *str) -{ - xfwrite(str, strlen(str), 1, data); -} - -void expr_fprint(struct expr *e, FILE *out) -{ - expr_print(e, expr_print_file_helper, out, E_NONE); -} - -static void expr_print_gstr_helper(void *data, struct symbol *sym, const char *str) -{ - struct gstr *gs = (struct gstr*)data; - const char *sym_str = NULL; - - if (sym) - sym_str = sym_get_string_value(sym); - - if (gs->max_width) { - unsigned extra_length = strlen(str); - const char *last_cr = strrchr(gs->s, '\n'); - unsigned last_line_length; - - if (sym_str) - extra_length += 4 + strlen(sym_str); - - if (!last_cr) - last_cr = gs->s; - - last_line_length = strlen(gs->s) - (last_cr - gs->s); - - if ((last_line_length + extra_length) > gs->max_width) - str_append(gs, "\\\n"); - } - - str_append(gs, str); - if (sym && sym->type != S_UNKNOWN) - str_printf(gs, " [=%s]", sym_str); -} - -void expr_gstr_print(struct expr *e, struct gstr *gs) -{ - expr_print(e, expr_print_gstr_helper, gs, E_NONE); -} diff --git a/payloads/external/SeaBIOS/scripts/kconfig/expr.h b/payloads/external/SeaBIOS/scripts/kconfig/expr.h deleted file mode 100644 index 412ea8a2..00000000 --- a/payloads/external/SeaBIOS/scripts/kconfig/expr.h +++ /dev/null @@ -1,241 +0,0 @@ -/* - * Copyright (C) 2002 Roman Zippel <zippel@linux-m68k.org> - * Released under the terms of the GNU GPL v2.0. - */ - -#ifndef EXPR_H -#define EXPR_H - -#ifdef __cplusplus -extern "C" { -#endif - -#include <assert.h> -#include <stdio.h> -#include "list.h" -#ifndef __cplusplus -#include <stdbool.h> -#endif - -struct file { - struct file *next; - struct file *parent; - const char *name; - int lineno; -}; - -typedef enum tristate { - no, mod, yes -} tristate; - -enum expr_type { - E_NONE, E_OR, E_AND, E_NOT, E_EQUAL, E_UNEQUAL, E_LIST, E_SYMBOL, E_RANGE -}; - -union expr_data { - struct expr *expr; - struct symbol *sym; -}; - -struct expr { - enum expr_type type; - union expr_data left, right; -}; - -#define EXPR_OR(dep1, dep2) (((dep1)>(dep2))?(dep1):(dep2)) -#define EXPR_AND(dep1, dep2) (((dep1)<(dep2))?(dep1):(dep2)) -#define EXPR_NOT(dep) (2-(dep)) - -#define expr_list_for_each_sym(l, e, s) \ - for (e = (l); e && (s = e->right.sym); e = e->left.expr) - -struct expr_value { - struct expr *expr; - tristate tri; -}; - -struct symbol_value { - void *val; - tristate tri; -}; - -enum symbol_type { - S_UNKNOWN, S_BOOLEAN, S_TRISTATE, S_INT, S_HEX, S_STRING, S_OTHER -}; - -/* enum values are used as index to symbol.def[] */ -enum { - S_DEF_USER, /* main user value */ - S_DEF_AUTO, /* values read from auto.conf */ - S_DEF_DEF3, /* Reserved for UI usage */ - S_DEF_DEF4, /* Reserved for UI usage */ - S_DEF_COUNT -}; - -struct symbol { - struct symbol *next; - char *name; - enum symbol_type type; - struct symbol_value curr; - struct symbol_value def[S_DEF_COUNT]; - tristate visible; - int flags; - struct property *prop; - struct expr_value dir_dep; - struct expr_value rev_dep; -}; - -#define for_all_symbols(i, sym) for (i = 0; i < SYMBOL_HASHSIZE; i++) for (sym = symbol_hash[i]; sym; sym = sym->next) if (sym->type != S_OTHER) - -#define SYMBOL_CONST 0x0001 /* symbol is const */ -#define SYMBOL_CHECK 0x0008 /* used during dependency checking */ -#define SYMBOL_CHOICE 0x0010 /* start of a choice block (null name) */ -#define SYMBOL_CHOICEVAL 0x0020 /* used as a value in a choice block */ -#define SYMBOL_VALID 0x0080 /* set when symbol.curr is calculated */ -#define SYMBOL_OPTIONAL 0x0100 /* choice is optional - values can be 'n' */ -#define SYMBOL_WRITE 0x0200 /* write symbol to file (KCONFIG_CONFIG) */ -#define SYMBOL_CHANGED 0x0400 /* ? */ -#define SYMBOL_AUTO 0x1000 /* value from environment variable */ -#define SYMBOL_CHECKED 0x2000 /* used during dependency checking */ -#define SYMBOL_WARNED 0x8000 /* warning has been issued */ - -/* Set when symbol.def[] is used */ -#define SYMBOL_DEF 0x10000 /* First bit of SYMBOL_DEF */ -#define SYMBOL_DEF_USER 0x10000 /* symbol.def[S_DEF_USER] is valid */ -#define SYMBOL_DEF_AUTO 0x20000 /* symbol.def[S_DEF_AUTO] is valid */ -#define SYMBOL_DEF3 0x40000 /* symbol.def[S_DEF_3] is valid */ -#define SYMBOL_DEF4 0x80000 /* symbol.def[S_DEF_4] is valid */ - -/* choice values need to be set before calculating this symbol value */ -#define SYMBOL_NEED_SET_CHOICE_VALUES 0x100000 - -/* Set symbol to y if allnoconfig; used for symbols that hide others */ -#define SYMBOL_ALLNOCONFIG_Y 0x200000 - -#define SYMBOL_MAXLENGTH 256 -#define SYMBOL_HASHSIZE 9973 - -/* A property represent the config options that can be associated - * with a config "symbol". - * Sample: - * config FOO - * default y - * prompt "foo prompt" - * select BAR - * config BAZ - * int "BAZ Value" - * range 1..255 - */ -enum prop_type { - P_UNKNOWN, - P_PROMPT, /* prompt "foo prompt" or "BAZ Value" */ - P_COMMENT, /* text associated with a comment */ - P_MENU, /* prompt associated with a menuconfig option */ - P_DEFAULT, /* default y */ - P_CHOICE, /* choice value */ - P_SELECT, /* select BAR */ - P_RANGE, /* range 7..100 (for a symbol) */ - P_ENV, /* value from environment variable */ - P_SYMBOL, /* where a symbol is defined */ -}; - -struct property { - struct property *next; /* next property - null if last */ - struct symbol *sym; /* the symbol for which the property is associated */ - enum prop_type type; /* type of property */ - const char *text; /* the prompt value - P_PROMPT, P_MENU, P_COMMENT */ - struct expr_value visible; - struct expr *expr; /* the optional conditional part of the property */ - struct menu *menu; /* the menu the property are associated with - * valid for: P_SELECT, P_RANGE, P_CHOICE, - * P_PROMPT, P_DEFAULT, P_MENU, P_COMMENT */ - struct file *file; /* what file was this property defined */ - int lineno; /* what lineno was this property defined */ -}; - -#define for_all_properties(sym, st, tok) \ - for (st = sym->prop; st; st = st->next) \ - if (st->type == (tok)) -#define for_all_defaults(sym, st) for_all_properties(sym, st, P_DEFAULT) -#define for_all_choices(sym, st) for_all_properties(sym, st, P_CHOICE) -#define for_all_prompts(sym, st) \ - for (st = sym->prop; st; st = st->next) \ - if (st->text) - -struct menu { - struct menu *next; - struct menu *parent; - struct menu *list; - struct symbol *sym; - struct property *prompt; - struct expr *visibility; - struct expr *dep; - unsigned int flags; - char *help; - struct file *file; - int lineno; - void *data; -}; - -#define MENU_CHANGED 0x0001 -#define MENU_ROOT 0x0002 - -struct jump_key { - struct list_head entries; - size_t offset; - struct menu *target; - int index; -}; - -#define JUMP_NB 9 - -extern struct file *file_list; -extern struct file *current_file; -struct file *lookup_file(const char *name); - -extern struct symbol symbol_yes, symbol_no, symbol_mod; -extern struct symbol *modules_sym; -extern struct symbol *sym_defconfig_list; -extern int cdebug; -struct expr *expr_alloc_symbol(struct symbol *sym); -struct expr *expr_alloc_one(enum expr_type type, struct expr *ce); -struct expr *expr_alloc_two(enum expr_type type, struct expr *e1, struct expr *e2); -struct expr *expr_alloc_comp(enum expr_type type, struct symbol *s1, struct symbol *s2); -struct expr *expr_alloc_and(struct expr *e1, struct expr *e2); -struct expr *expr_alloc_or(struct expr *e1, struct expr *e2); -struct expr *expr_copy(const struct expr *org); -void expr_free(struct expr *e); -int expr_eq(struct expr *e1, struct expr *e2); -void expr_eliminate_eq(struct expr **ep1, struct expr **ep2); -tristate expr_calc_value(struct expr *e); -struct expr *expr_eliminate_yn(struct expr *e); -struct expr *expr_trans_bool(struct expr *e); -struct expr *expr_eliminate_dups(struct expr *e); -struct expr *expr_transform(struct expr *e); -int expr_contains_symbol(struct expr *dep, struct symbol *sym); -bool expr_depends_symbol(struct expr *dep, struct symbol *sym); -struct expr *expr_extract_eq_and(struct expr **ep1, struct expr **ep2); -struct expr *expr_extract_eq_or(struct expr **ep1, struct expr **ep2); -void expr_extract_eq(enum expr_type type, struct expr **ep, struct expr **ep1, struct expr **ep2); -struct expr *expr_trans_compare(struct expr *e, enum expr_type type, struct symbol *sym); -struct expr *expr_simplify_unmet_dep(struct expr *e1, struct expr *e2); - -void expr_fprint(struct expr *e, FILE *out); -struct gstr; /* forward */ -void expr_gstr_print(struct expr *e, struct gstr *gs); - -static inline int expr_is_yes(struct expr *e) -{ - return !e || (e->type == E_SYMBOL && e->left.sym == &symbol_yes); -} - -static inline int expr_is_no(struct expr *e) -{ - return e && (e->type == E_SYMBOL && e->left.sym == &symbol_no); -} - -#ifdef __cplusplus -} -#endif - -#endif /* EXPR_H */ diff --git a/payloads/external/SeaBIOS/scripts/kconfig/gconf.c b/payloads/external/SeaBIOS/scripts/kconfig/gconf.c deleted file mode 100644 index d0a35b21..00000000 --- a/payloads/external/SeaBIOS/scripts/kconfig/gconf.c +++ /dev/null @@ -1,1542 +0,0 @@ -/* Hey EMACS -*- linux-c -*- */ -/* - * - * Copyright (C) 2002-2003 Romain Lievin <roms@tilp.info> - * Released under the terms of the GNU GPL v2.0. - * - */ - -#ifdef HAVE_CONFIG_H -# include <config.h> -#endif - -#include <stdlib.h> -#include "lkc.h" -#include "images.c" - -#include <glade/glade.h> -#include <gtk/gtk.h> -#include <glib.h> -#include <gdk/gdkkeysyms.h> - -#include <stdio.h> -#include <string.h> -#include <unistd.h> -#include <time.h> - -//#define DEBUG - -enum { - SINGLE_VIEW, SPLIT_VIEW, FULL_VIEW -}; - -enum { - OPT_NORMAL, OPT_ALL, OPT_PROMPT -}; - -static gint view_mode = FULL_VIEW; -static gboolean show_name = TRUE; -static gboolean show_range = TRUE; -static gboolean show_value = TRUE; -static gboolean resizeable = FALSE; -static int opt_mode = OPT_NORMAL; - -GtkWidget *main_wnd = NULL; -GtkWidget *tree1_w = NULL; // left frame -GtkWidget *tree2_w = NULL; // right frame -GtkWidget *text_w = NULL; -GtkWidget *hpaned = NULL; -GtkWidget *vpaned = NULL; -GtkWidget *back_btn = NULL; -GtkWidget *save_btn = NULL; -GtkWidget *save_menu_item = NULL; - -GtkTextTag *tag1, *tag2; -GdkColor color; - -GtkTreeStore *tree1, *tree2, *tree; -GtkTreeModel *model1, *model2; -static GtkTreeIter *parents[256]; -static gint indent; - -static struct menu *current; // current node for SINGLE view -static struct menu *browsed; // browsed node for SPLIT view - -enum { - COL_OPTION, COL_NAME, COL_NO, COL_MOD, COL_YES, COL_VALUE, - COL_MENU, COL_COLOR, COL_EDIT, COL_PIXBUF, - COL_PIXVIS, COL_BTNVIS, COL_BTNACT, COL_BTNINC, COL_BTNRAD, - COL_NUMBER -}; - -static void display_list(void); -static void display_tree(struct menu *menu); -static void display_tree_part(void); -static void update_tree(struct menu *src, GtkTreeIter * dst); -static void set_node(GtkTreeIter * node, struct menu *menu, gchar ** row); -static gchar **fill_row(struct menu *menu); -static void conf_changed(void); - -/* Helping/Debugging Functions */ - -const char *dbg_sym_flags(int val) -{ - static char buf[256]; - - bzero(buf, 256); - - if (val & SYMBOL_CONST) - strcat(buf, "const/"); - if (val & SYMBOL_CHECK) - strcat(buf, "check/"); - if (val & SYMBOL_CHOICE) - strcat(buf, "choice/"); - if (val & SYMBOL_CHOICEVAL) - strcat(buf, "choiceval/"); - if (val & SYMBOL_VALID) - strcat(buf, "valid/"); - if (val & SYMBOL_OPTIONAL) - strcat(buf, "optional/"); - if (val & SYMBOL_WRITE) - strcat(buf, "write/"); - if (val & SYMBOL_CHANGED) - strcat(buf, "changed/"); - if (val & SYMBOL_AUTO) - strcat(buf, "auto/"); - - buf[strlen(buf) - 1] = '\0'; - - return buf; -} - -void replace_button_icon(GladeXML * xml, GdkDrawable * window, - GtkStyle * style, gchar * btn_name, gchar ** xpm) -{ - GdkPixmap *pixmap; - GdkBitmap *mask; - GtkToolButton *button; - GtkWidget *image; - - pixmap = gdk_pixmap_create_from_xpm_d(window, &mask, - &style->bg[GTK_STATE_NORMAL], - xpm); - - button = GTK_TOOL_BUTTON(glade_xml_get_widget(xml, btn_name)); - image = gtk_image_new_from_pixmap(pixmap, mask); - gtk_widget_show(image); - gtk_tool_button_set_icon_widget(button, image); -} - -/* Main Window Initialization */ -void init_main_window(const gchar * glade_file) -{ - GladeXML *xml; - GtkWidget *widget; - GtkTextBuffer *txtbuf; - GtkStyle *style; - - xml = glade_xml_new(glade_file, "window1", NULL); - if (!xml) - g_error(_("GUI loading failed !\n")); - glade_xml_signal_autoconnect(xml); - - main_wnd = glade_xml_get_widget(xml, "window1"); - hpaned = glade_xml_get_widget(xml, "hpaned1"); - vpaned = glade_xml_get_widget(xml, "vpaned1"); - tree1_w = glade_xml_get_widget(xml, "treeview1"); - tree2_w = glade_xml_get_widget(xml, "treeview2"); - text_w = glade_xml_get_widget(xml, "textview3"); - - back_btn = glade_xml_get_widget(xml, "button1"); - gtk_widget_set_sensitive(back_btn, FALSE); - - widget = glade_xml_get_widget(xml, "show_name1"); - gtk_check_menu_item_set_active((GtkCheckMenuItem *) widget, - show_name); - - widget = glade_xml_get_widget(xml, "show_range1"); - gtk_check_menu_item_set_active((GtkCheckMenuItem *) widget, - show_range); - - widget = glade_xml_get_widget(xml, "show_data1"); - gtk_check_menu_item_set_active((GtkCheckMenuItem *) widget, - show_value); - - save_btn = glade_xml_get_widget(xml, "button3"); - save_menu_item = glade_xml_get_widget(xml, "save1"); - conf_set_changed_callback(conf_changed); - - style = gtk_widget_get_style(main_wnd); - widget = glade_xml_get_widget(xml, "toolbar1"); - -#if 0 /* Use stock Gtk icons instead */ - replace_button_icon(xml, main_wnd->window, style, - "button1", (gchar **) xpm_back); - replace_button_icon(xml, main_wnd->window, style, - "button2", (gchar **) xpm_load); - replace_button_icon(xml, main_wnd->window, style, - "button3", (gchar **) xpm_save); -#endif - replace_button_icon(xml, main_wnd->window, style, - "button4", (gchar **) xpm_single_view); - replace_button_icon(xml, main_wnd->window, style, - "button5", (gchar **) xpm_split_view); - replace_button_icon(xml, main_wnd->window, style, - "button6", (gchar **) xpm_tree_view); - -#if 0 - switch (view_mode) { - case SINGLE_VIEW: - widget = glade_xml_get_widget(xml, "button4"); - g_signal_emit_by_name(widget, "clicked"); - break; - case SPLIT_VIEW: - widget = glade_xml_get_widget(xml, "button5"); - g_signal_emit_by_name(widget, "clicked"); - break; - case FULL_VIEW: - widget = glade_xml_get_widget(xml, "button6"); - g_signal_emit_by_name(widget, "clicked"); - break; - } -#endif - txtbuf = gtk_text_view_get_buffer(GTK_TEXT_VIEW(text_w)); - tag1 = gtk_text_buffer_create_tag(txtbuf, "mytag1", - "foreground", "red", - "weight", PANGO_WEIGHT_BOLD, - NULL); - tag2 = gtk_text_buffer_create_tag(txtbuf, "mytag2", - /*"style", PANGO_STYLE_OBLIQUE, */ - NULL); - - gtk_window_set_title(GTK_WINDOW(main_wnd), rootmenu.prompt->text); - - gtk_widget_show(main_wnd); -} - -void init_tree_model(void) -{ - gint i; - - tree = tree2 = gtk_tree_store_new(COL_NUMBER, - G_TYPE_STRING, G_TYPE_STRING, - G_TYPE_STRING, G_TYPE_STRING, - G_TYPE_STRING, G_TYPE_STRING, - G_TYPE_POINTER, GDK_TYPE_COLOR, - G_TYPE_BOOLEAN, GDK_TYPE_PIXBUF, - G_TYPE_BOOLEAN, G_TYPE_BOOLEAN, - G_TYPE_BOOLEAN, G_TYPE_BOOLEAN, - G_TYPE_BOOLEAN); - model2 = GTK_TREE_MODEL(tree2); - - for (parents[0] = NULL, i = 1; i < 256; i++) - parents[i] = (GtkTreeIter *) g_malloc(sizeof(GtkTreeIter)); - - tree1 = gtk_tree_store_new(COL_NUMBER, - G_TYPE_STRING, G_TYPE_STRING, - G_TYPE_STRING, G_TYPE_STRING, - G_TYPE_STRING, G_TYPE_STRING, - G_TYPE_POINTER, GDK_TYPE_COLOR, - G_TYPE_BOOLEAN, GDK_TYPE_PIXBUF, - G_TYPE_BOOLEAN, G_TYPE_BOOLEAN, - G_TYPE_BOOLEAN, G_TYPE_BOOLEAN, - G_TYPE_BOOLEAN); - model1 = GTK_TREE_MODEL(tree1); -} - -void init_left_tree(void) -{ - GtkTreeView *view = GTK_TREE_VIEW(tree1_w); - GtkCellRenderer *renderer; - GtkTreeSelection *sel; - GtkTreeViewColumn *column; - - gtk_tree_view_set_model(view, model1); - gtk_tree_view_set_headers_visible(view, TRUE); - gtk_tree_view_set_rules_hint(view, TRUE); - - column = gtk_tree_view_column_new(); - gtk_tree_view_append_column(view, column); - gtk_tree_view_column_set_title(column, _("Options")); - - renderer = gtk_cell_renderer_toggle_new(); - gtk_tree_view_column_pack_start(GTK_TREE_VIEW_COLUMN(column), - renderer, FALSE); - gtk_tree_view_column_set_attributes(GTK_TREE_VIEW_COLUMN(column), - renderer, - "active", COL_BTNACT, - "inconsistent", COL_BTNINC, - "visible", COL_BTNVIS, - "radio", COL_BTNRAD, NULL); - renderer = gtk_cell_renderer_text_new(); - gtk_tree_view_column_pack_start(GTK_TREE_VIEW_COLUMN(column), - renderer, FALSE); - gtk_tree_view_column_set_attributes(GTK_TREE_VIEW_COLUMN(column), - renderer, - "text", COL_OPTION, - "foreground-gdk", - COL_COLOR, NULL); - - sel = gtk_tree_view_get_selection(view); - gtk_tree_selection_set_mode(sel, GTK_SELECTION_SINGLE); - gtk_widget_realize(tree1_w); -} - -static void renderer_edited(GtkCellRendererText * cell, - const gchar * path_string, - const gchar * new_text, gpointer user_data); - -void init_right_tree(void) -{ - GtkTreeView *view = GTK_TREE_VIEW(tree2_w); - GtkCellRenderer *renderer; - GtkTreeSelection *sel; - GtkTreeViewColumn *column; - gint i; - - gtk_tree_view_set_model(view, model2); - gtk_tree_view_set_headers_visible(view, TRUE); - gtk_tree_view_set_rules_hint(view, TRUE); - - column = gtk_tree_view_column_new(); - gtk_tree_view_append_column(view, column); - gtk_tree_view_column_set_title(column, _("Options")); - - renderer = gtk_cell_renderer_pixbuf_new(); - gtk_tree_view_column_pack_start(GTK_TREE_VIEW_COLUMN(column), - renderer, FALSE); - gtk_tree_view_column_set_attributes(GTK_TREE_VIEW_COLUMN(column), - renderer, - "pixbuf", COL_PIXBUF, - "visible", COL_PIXVIS, NULL); - renderer = gtk_cell_renderer_toggle_new(); - gtk_tree_view_column_pack_start(GTK_TREE_VIEW_COLUMN(column), - renderer, FALSE); - gtk_tree_view_column_set_attributes(GTK_TREE_VIEW_COLUMN(column), - renderer, - "active", COL_BTNACT, - "inconsistent", COL_BTNINC, - "visible", COL_BTNVIS, - "radio", COL_BTNRAD, NULL); - renderer = gtk_cell_renderer_text_new(); - gtk_tree_view_column_pack_start(GTK_TREE_VIEW_COLUMN(column), - renderer, FALSE); - gtk_tree_view_column_set_attributes(GTK_TREE_VIEW_COLUMN(column), - renderer, - "text", COL_OPTION, - "foreground-gdk", - COL_COLOR, NULL); - - renderer = gtk_cell_renderer_text_new(); - gtk_tree_view_insert_column_with_attributes(view, -1, - _("Name"), renderer, - "text", COL_NAME, - "foreground-gdk", - COL_COLOR, NULL); - renderer = gtk_cell_renderer_text_new(); - gtk_tree_view_insert_column_with_attributes(view, -1, - "N", renderer, - "text", COL_NO, - "foreground-gdk", - COL_COLOR, NULL); - renderer = gtk_cell_renderer_text_new(); - gtk_tree_view_insert_column_with_attributes(view, -1, - "M", renderer, - "text", COL_MOD, - "foreground-gdk", - COL_COLOR, NULL); - renderer = gtk_cell_renderer_text_new(); - gtk_tree_view_insert_column_with_attributes(view, -1, - "Y", renderer, - "text", COL_YES, - "foreground-gdk", - COL_COLOR, NULL); - renderer = gtk_cell_renderer_text_new(); - gtk_tree_view_insert_column_with_attributes(view, -1, - _("Value"), renderer, - "text", COL_VALUE, - "editable", - COL_EDIT, - "foreground-gdk", - COL_COLOR, NULL); - g_signal_connect(G_OBJECT(renderer), "edited", - G_CALLBACK(renderer_edited), NULL); - - column = gtk_tree_view_get_column(view, COL_NAME); - gtk_tree_view_column_set_visible(column, show_name); - column = gtk_tree_view_get_column(view, COL_NO); - gtk_tree_view_column_set_visible(column, show_range); - column = gtk_tree_view_get_column(view, COL_MOD); - gtk_tree_view_column_set_visible(column, show_range); - column = gtk_tree_view_get_column(view, COL_YES); - gtk_tree_view_column_set_visible(column, show_range); - column = gtk_tree_view_get_column(view, COL_VALUE); - gtk_tree_view_column_set_visible(column, show_value); - - if (resizeable) { - for (i = 0; i < COL_VALUE; i++) { - column = gtk_tree_view_get_column(view, i); - gtk_tree_view_column_set_resizable(column, TRUE); - } - } - - sel = gtk_tree_view_get_selection(view); - gtk_tree_selection_set_mode(sel, GTK_SELECTION_SINGLE); -} - - -/* Utility Functions */ - - -static void text_insert_help(struct menu *menu) -{ - GtkTextBuffer *buffer; - GtkTextIter start, end; - const char *prompt = _(menu_get_prompt(menu)); - struct gstr help = str_new(); - - menu_get_ext_help(menu, &help); - - buffer = gtk_text_view_get_buffer(GTK_TEXT_VIEW(text_w)); - gtk_text_buffer_get_bounds(buffer, &start, &end); - gtk_text_buffer_delete(buffer, &start, &end); - gtk_text_view_set_left_margin(GTK_TEXT_VIEW(text_w), 15); - - gtk_text_buffer_get_end_iter(buffer, &end); - gtk_text_buffer_insert_with_tags(buffer, &end, prompt, -1, tag1, - NULL); - gtk_text_buffer_insert_at_cursor(buffer, "\n\n", 2); - gtk_text_buffer_get_end_iter(buffer, &end); - gtk_text_buffer_insert_with_tags(buffer, &end, str_get(&help), -1, tag2, - NULL); - str_free(&help); -} - - -static void text_insert_msg(const char *title, const char *message) -{ - GtkTextBuffer *buffer; - GtkTextIter start, end; - const char *msg = message; - - buffer = gtk_text_view_get_buffer(GTK_TEXT_VIEW(text_w)); - gtk_text_buffer_get_bounds(buffer, &start, &end); - gtk_text_buffer_delete(buffer, &start, &end); - gtk_text_view_set_left_margin(GTK_TEXT_VIEW(text_w), 15); - - gtk_text_buffer_get_end_iter(buffer, &end); - gtk_text_buffer_insert_with_tags(buffer, &end, title, -1, tag1, - NULL); - gtk_text_buffer_insert_at_cursor(buffer, "\n\n", 2); - gtk_text_buffer_get_end_iter(buffer, &end); - gtk_text_buffer_insert_with_tags(buffer, &end, msg, -1, tag2, - NULL); -} - - -/* Main Windows Callbacks */ - -void on_save_activate(GtkMenuItem * menuitem, gpointer user_data); -gboolean on_window1_delete_event(GtkWidget * widget, GdkEvent * event, - gpointer user_data) -{ - GtkWidget *dialog, *label; - gint result; - - if (!conf_get_changed()) - return FALSE; - - dialog = gtk_dialog_new_with_buttons(_("Warning !"), - GTK_WINDOW(main_wnd), - (GtkDialogFlags) - (GTK_DIALOG_MODAL | - GTK_DIALOG_DESTROY_WITH_PARENT), - GTK_STOCK_OK, - GTK_RESPONSE_YES, - GTK_STOCK_NO, - GTK_RESPONSE_NO, - GTK_STOCK_CANCEL, - GTK_RESPONSE_CANCEL, NULL); - gtk_dialog_set_default_response(GTK_DIALOG(dialog), - GTK_RESPONSE_CANCEL); - - label = gtk_label_new(_("\nSave configuration ?\n")); - gtk_container_add(GTK_CONTAINER(GTK_DIALOG(dialog)->vbox), label); - gtk_widget_show(label); - - result = gtk_dialog_run(GTK_DIALOG(dialog)); - switch (result) { - case GTK_RESPONSE_YES: - on_save_activate(NULL, NULL); - return FALSE; - case GTK_RESPONSE_NO: - return FALSE; - case GTK_RESPONSE_CANCEL: - case GTK_RESPONSE_DELETE_EVENT: - default: - gtk_widget_destroy(dialog); - return TRUE; - } - - return FALSE; -} - - -void on_window1_destroy(GtkObject * object, gpointer user_data) -{ - gtk_main_quit(); -} - - -void -on_window1_size_request(GtkWidget * widget, - GtkRequisition * requisition, gpointer user_data) -{ - static gint old_h; - gint w, h; - - if (widget->window == NULL) - gtk_window_get_default_size(GTK_WINDOW(main_wnd), &w, &h); - else - gdk_window_get_size(widget->window, &w, &h); - - if (h == old_h) - return; - old_h = h; - - gtk_paned_set_position(GTK_PANED(vpaned), 2 * h / 3); -} - - -/* Menu & Toolbar Callbacks */ - - -static void -load_filename(GtkFileSelection * file_selector, gpointer user_data) -{ - const gchar *fn; - - fn = gtk_file_selection_get_filename(GTK_FILE_SELECTION - (user_data)); - - if (conf_read(fn)) - text_insert_msg(_("Error"), _("Unable to load configuration !")); - else - display_tree(&rootmenu); -} - -void on_load1_activate(GtkMenuItem * menuitem, gpointer user_data) -{ - GtkWidget *fs; - - fs = gtk_file_selection_new(_("Load file...")); - g_signal_connect(GTK_OBJECT(GTK_FILE_SELECTION(fs)->ok_button), - "clicked", - G_CALLBACK(load_filename), (gpointer) fs); - g_signal_connect_swapped(GTK_OBJECT - (GTK_FILE_SELECTION(fs)->ok_button), - "clicked", G_CALLBACK(gtk_widget_destroy), - (gpointer) fs); - g_signal_connect_swapped(GTK_OBJECT - (GTK_FILE_SELECTION(fs)->cancel_button), - "clicked", G_CALLBACK(gtk_widget_destroy), - (gpointer) fs); - gtk_widget_show(fs); -} - - -void on_save_activate(GtkMenuItem * menuitem, gpointer user_data) -{ - if (conf_write(NULL)) - text_insert_msg(_("Error"), _("Unable to save configuration !")); -} - - -static void -store_filename(GtkFileSelection * file_selector, gpointer user_data) -{ - const gchar *fn; - - fn = gtk_file_selection_get_filename(GTK_FILE_SELECTION - (user_data)); - - if (conf_write(fn)) - text_insert_msg(_("Error"), _("Unable to save configuration !")); - - gtk_widget_destroy(GTK_WIDGET(user_data)); -} - -void on_save_as1_activate(GtkMenuItem * menuitem, gpointer user_data) -{ - GtkWidget *fs; - - fs = gtk_file_selection_new(_("Save file as...")); - g_signal_connect(GTK_OBJECT(GTK_FILE_SELECTION(fs)->ok_button), - "clicked", - G_CALLBACK(store_filename), (gpointer) fs); - g_signal_connect_swapped(GTK_OBJECT - (GTK_FILE_SELECTION(fs)->ok_button), - "clicked", G_CALLBACK(gtk_widget_destroy), - (gpointer) fs); - g_signal_connect_swapped(GTK_OBJECT - (GTK_FILE_SELECTION(fs)->cancel_button), - "clicked", G_CALLBACK(gtk_widget_destroy), - (gpointer) fs); - gtk_widget_show(fs); -} - - -void on_quit1_activate(GtkMenuItem * menuitem, gpointer user_data) -{ - if (!on_window1_delete_event(NULL, NULL, NULL)) - gtk_widget_destroy(GTK_WIDGET(main_wnd)); -} - - -void on_show_name1_activate(GtkMenuItem * menuitem, gpointer user_data) -{ - GtkTreeViewColumn *col; - - show_name = GTK_CHECK_MENU_ITEM(menuitem)->active; - col = gtk_tree_view_get_column(GTK_TREE_VIEW(tree2_w), COL_NAME); - if (col) - gtk_tree_view_column_set_visible(col, show_name); -} - - -void on_show_range1_activate(GtkMenuItem * menuitem, gpointer user_data) -{ - GtkTreeViewColumn *col; - - show_range = GTK_CHECK_MENU_ITEM(menuitem)->active; - col = gtk_tree_view_get_column(GTK_TREE_VIEW(tree2_w), COL_NO); - if (col) - gtk_tree_view_column_set_visible(col, show_range); - col = gtk_tree_view_get_column(GTK_TREE_VIEW(tree2_w), COL_MOD); - if (col) - gtk_tree_view_column_set_visible(col, show_range); - col = gtk_tree_view_get_column(GTK_TREE_VIEW(tree2_w), COL_YES); - if (col) - gtk_tree_view_column_set_visible(col, show_range); - -} - - -void on_show_data1_activate(GtkMenuItem * menuitem, gpointer user_data) -{ - GtkTreeViewColumn *col; - - show_value = GTK_CHECK_MENU_ITEM(menuitem)->active; - col = gtk_tree_view_get_column(GTK_TREE_VIEW(tree2_w), COL_VALUE); - if (col) - gtk_tree_view_column_set_visible(col, show_value); -} - - -void -on_set_option_mode1_activate(GtkMenuItem *menuitem, gpointer user_data) -{ - opt_mode = OPT_NORMAL; - gtk_tree_store_clear(tree2); - display_tree(&rootmenu); /* instead of update_tree to speed-up */ -} - - -void -on_set_option_mode2_activate(GtkMenuItem *menuitem, gpointer user_data) -{ - opt_mode = OPT_ALL; - gtk_tree_store_clear(tree2); - display_tree(&rootmenu); /* instead of update_tree to speed-up */ -} - - -void -on_set_option_mode3_activate(GtkMenuItem *menuitem, gpointer user_data) -{ - opt_mode = OPT_PROMPT; - gtk_tree_store_clear(tree2); - display_tree(&rootmenu); /* instead of update_tree to speed-up */ -} - - -void on_introduction1_activate(GtkMenuItem * menuitem, gpointer user_data) -{ - GtkWidget *dialog; - const gchar *intro_text = _( - "Welcome to gkc, the GTK+ graphical configuration tool\n" - "For each option, a blank box indicates the feature is disabled, a\n" - "check indicates it is enabled, and a dot indicates that it is to\n" - "be compiled as a module. Clicking on the box will cycle through the three states.\n" - "\n" - "If you do not see an option (e.g., a device driver) that you\n" - "believe should be present, try turning on Show All Options\n" - "under the Options menu.\n" - "Although there is no cross reference yet to help you figure out\n" - "what other options must be enabled to support the option you\n" - "are interested in, you can still view the help of a grayed-out\n" - "option.\n" - "\n" - "Toggling Show Debug Info under the Options menu will show \n" - "the dependencies, which you can then match by examining other options."); - - dialog = gtk_message_dialog_new(GTK_WINDOW(main_wnd), - GTK_DIALOG_DESTROY_WITH_PARENT, - GTK_MESSAGE_INFO, - GTK_BUTTONS_CLOSE, "%s", intro_text); - g_signal_connect_swapped(GTK_OBJECT(dialog), "response", - G_CALLBACK(gtk_widget_destroy), - GTK_OBJECT(dialog)); - gtk_widget_show_all(dialog); -} - - -void on_about1_activate(GtkMenuItem * menuitem, gpointer user_data) -{ - GtkWidget *dialog; - const gchar *about_text = - _("gkc is copyright (c) 2002 Romain Lievin <roms@lpg.ticalc.org>.\n" - "Based on the source code from Roman Zippel.\n"); - - dialog = gtk_message_dialog_new(GTK_WINDOW(main_wnd), - GTK_DIALOG_DESTROY_WITH_PARENT, - GTK_MESSAGE_INFO, - GTK_BUTTONS_CLOSE, "%s", about_text); - g_signal_connect_swapped(GTK_OBJECT(dialog), "response", - G_CALLBACK(gtk_widget_destroy), - GTK_OBJECT(dialog)); - gtk_widget_show_all(dialog); -} - - -void on_license1_activate(GtkMenuItem * menuitem, gpointer user_data) -{ - GtkWidget *dialog; - const gchar *license_text = - _("gkc is released under the terms of the GNU GPL v2.\n" - "For more information, please see the source code or\n" - "visit http://www.fsf.org/licenses/licenses.html\n"); - - dialog = gtk_message_dialog_new(GTK_WINDOW(main_wnd), - GTK_DIALOG_DESTROY_WITH_PARENT, - GTK_MESSAGE_INFO, - GTK_BUTTONS_CLOSE, "%s", license_text); - g_signal_connect_swapped(GTK_OBJECT(dialog), "response", - G_CALLBACK(gtk_widget_destroy), - GTK_OBJECT(dialog)); - gtk_widget_show_all(dialog); -} - - -void on_back_clicked(GtkButton * button, gpointer user_data) -{ - enum prop_type ptype; - - current = current->parent; - ptype = current->prompt ? current->prompt->type : P_UNKNOWN; - if (ptype != P_MENU) - current = current->parent; - display_tree_part(); - - if (current == &rootmenu) - gtk_widget_set_sensitive(back_btn, FALSE); -} - - -void on_load_clicked(GtkButton * button, gpointer user_data) -{ - on_load1_activate(NULL, user_data); -} - - -void on_single_clicked(GtkButton * button, gpointer user_data) -{ - view_mode = SINGLE_VIEW; - gtk_widget_hide(tree1_w); - current = &rootmenu; - display_tree_part(); -} - - -void on_split_clicked(GtkButton * button, gpointer user_data) -{ - gint w, h; - view_mode = SPLIT_VIEW; - gtk_widget_show(tree1_w); - gtk_window_get_default_size(GTK_WINDOW(main_wnd), &w, &h); - gtk_paned_set_position(GTK_PANED(hpaned), w / 2); - if (tree2) - gtk_tree_store_clear(tree2); - display_list(); - - /* Disable back btn, like in full mode. */ - gtk_widget_set_sensitive(back_btn, FALSE); -} - - -void on_full_clicked(GtkButton * button, gpointer user_data) -{ - view_mode = FULL_VIEW; - gtk_widget_hide(tree1_w); - if (tree2) - gtk_tree_store_clear(tree2); - display_tree(&rootmenu); - gtk_widget_set_sensitive(back_btn, FALSE); -} - - -void on_collapse_clicked(GtkButton * button, gpointer user_data) -{ - gtk_tree_view_collapse_all(GTK_TREE_VIEW(tree2_w)); -} - - -void on_expand_clicked(GtkButton * button, gpointer user_data) -{ - gtk_tree_view_expand_all(GTK_TREE_VIEW(tree2_w)); -} - - -/* CTree Callbacks */ - -/* Change hex/int/string value in the cell */ -static void renderer_edited(GtkCellRendererText * cell, - const gchar * path_string, - const gchar * new_text, gpointer user_data) -{ - GtkTreePath *path = gtk_tree_path_new_from_string(path_string); - GtkTreeIter iter; - const char *old_def, *new_def; - struct menu *menu; - struct symbol *sym; - - if (!gtk_tree_model_get_iter(model2, &iter, path)) - return; - - gtk_tree_model_get(model2, &iter, COL_MENU, &menu, -1); - sym = menu->sym; - - gtk_tree_model_get(model2, &iter, COL_VALUE, &old_def, -1); - new_def = new_text; - - sym_set_string_value(sym, new_def); - - update_tree(&rootmenu, NULL); - - gtk_tree_path_free(path); -} - -/* Change the value of a symbol and update the tree */ -static void change_sym_value(struct menu *menu, gint col) -{ - struct symbol *sym = menu->sym; - tristate newval; - - if (!sym) - return; - - if (col == COL_NO) - newval = no; - else if (col == COL_MOD) - newval = mod; - else if (col == COL_YES) - newval = yes; - else - return; - - switch (sym_get_type(sym)) { - case S_BOOLEAN: - case S_TRISTATE: - if (!sym_tristate_within_range(sym, newval)) - newval = yes; - sym_set_tristate_value(sym, newval); - if (view_mode == FULL_VIEW) - update_tree(&rootmenu, NULL); - else if (view_mode == SPLIT_VIEW) { - update_tree(browsed, NULL); - display_list(); - } - else if (view_mode == SINGLE_VIEW) - display_tree_part(); //fixme: keep exp/coll - break; - case S_INT: - case S_HEX: - case S_STRING: - default: - break; - } -} - -static void toggle_sym_value(struct menu *menu) -{ - if (!menu->sym) - return; - - sym_toggle_tristate_value(menu->sym); - if (view_mode == FULL_VIEW) - update_tree(&rootmenu, NULL); - else if (view_mode == SPLIT_VIEW) { - update_tree(browsed, NULL); - display_list(); - } - else if (view_mode == SINGLE_VIEW) - display_tree_part(); //fixme: keep exp/coll -} - -static gint column2index(GtkTreeViewColumn * column) -{ - gint i; - - for (i = 0; i < COL_NUMBER; i++) { - GtkTreeViewColumn *col; - - col = gtk_tree_view_get_column(GTK_TREE_VIEW(tree2_w), i); - if (col == column) - return i; - } - - return -1; -} - - -/* User click: update choice (full) or goes down (single) */ -gboolean -on_treeview2_button_press_event(GtkWidget * widget, - GdkEventButton * event, gpointer user_data) -{ - GtkTreeView *view = GTK_TREE_VIEW(widget); - GtkTreePath *path; - GtkTreeViewColumn *column; - GtkTreeIter iter; - struct menu *menu; - gint col; - -#if GTK_CHECK_VERSION(2,1,4) // bug in ctree with earlier version of GTK - gint tx = (gint) event->x; - gint ty = (gint) event->y; - gint cx, cy; - - gtk_tree_view_get_path_at_pos(view, tx, ty, &path, &column, &cx, - &cy); -#else - gtk_tree_view_get_cursor(view, &path, &column); -#endif - if (path == NULL) - return FALSE; - - if (!gtk_tree_model_get_iter(model2, &iter, path)) - return FALSE; - gtk_tree_model_get(model2, &iter, COL_MENU, &menu, -1); - - col = column2index(column); - if (event->type == GDK_2BUTTON_PRESS) { - enum prop_type ptype; - ptype = menu->prompt ? menu->prompt->type : P_UNKNOWN; - - if (ptype == P_MENU && view_mode != FULL_VIEW && col == COL_OPTION) { - // goes down into menu - current = menu; - display_tree_part(); - gtk_widget_set_sensitive(back_btn, TRUE); - } else if ((col == COL_OPTION)) { - toggle_sym_value(menu); - gtk_tree_view_expand_row(view, path, TRUE); - } - } else { - if (col == COL_VALUE) { - toggle_sym_value(menu); - gtk_tree_view_expand_row(view, path, TRUE); - } else if (col == COL_NO || col == COL_MOD - || col == COL_YES) { - change_sym_value(menu, col); - gtk_tree_view_expand_row(view, path, TRUE); - } - } - - return FALSE; -} - -/* Key pressed: update choice */ -gboolean -on_treeview2_key_press_event(GtkWidget * widget, - GdkEventKey * event, gpointer user_data) -{ - GtkTreeView *view = GTK_TREE_VIEW(widget); - GtkTreePath *path; - GtkTreeViewColumn *column; - GtkTreeIter iter; - struct menu *menu; - gint col; - - gtk_tree_view_get_cursor(view, &path, &column); - if (path == NULL) - return FALSE; - - if (event->keyval == GDK_space) { - if (gtk_tree_view_row_expanded(view, path)) - gtk_tree_view_collapse_row(view, path); - else - gtk_tree_view_expand_row(view, path, FALSE); - return TRUE; - } - if (event->keyval == GDK_KP_Enter) { - } - if (widget == tree1_w) - return FALSE; - - gtk_tree_model_get_iter(model2, &iter, path); - gtk_tree_model_get(model2, &iter, COL_MENU, &menu, -1); - - if (!strcasecmp(event->string, "n")) - col = COL_NO; - else if (!strcasecmp(event->string, "m")) - col = COL_MOD; - else if (!strcasecmp(event->string, "y")) - col = COL_YES; - else - col = -1; - change_sym_value(menu, col); - - return FALSE; -} - - -/* Row selection changed: update help */ -void -on_treeview2_cursor_changed(GtkTreeView * treeview, gpointer user_data) -{ - GtkTreeSelection *selection; - GtkTreeIter iter; - struct menu *menu; - - selection = gtk_tree_view_get_selection(treeview); - if (gtk_tree_selection_get_selected(selection, &model2, &iter)) { - gtk_tree_model_get(model2, &iter, COL_MENU, &menu, -1); - text_insert_help(menu); - } -} - - -/* User click: display sub-tree in the right frame. */ -gboolean -on_treeview1_button_press_event(GtkWidget * widget, - GdkEventButton * event, gpointer user_data) -{ - GtkTreeView *view = GTK_TREE_VIEW(widget); - GtkTreePath *path; - GtkTreeViewColumn *column; - GtkTreeIter iter; - struct menu *menu; - - gint tx = (gint) event->x; - gint ty = (gint) event->y; - gint cx, cy; - - gtk_tree_view_get_path_at_pos(view, tx, ty, &path, &column, &cx, - &cy); - if (path == NULL) - return FALSE; - - gtk_tree_model_get_iter(model1, &iter, path); - gtk_tree_model_get(model1, &iter, COL_MENU, &menu, -1); - - if (event->type == GDK_2BUTTON_PRESS) { - toggle_sym_value(menu); - current = menu; - display_tree_part(); - } else { - browsed = menu; - display_tree_part(); - } - - gtk_widget_realize(tree2_w); - gtk_tree_view_set_cursor(view, path, NULL, FALSE); - gtk_widget_grab_focus(tree2_w); - - return FALSE; -} - - -/* Fill a row of strings */ -static gchar **fill_row(struct menu *menu) -{ - static gchar *row[COL_NUMBER]; - struct symbol *sym = menu->sym; - const char *def; - int stype; - tristate val; - enum prop_type ptype; - int i; - - for (i = COL_OPTION; i <= COL_COLOR; i++) - g_free(row[i]); - bzero(row, sizeof(row)); - - row[COL_OPTION] = - g_strdup_printf("%s %s", _(menu_get_prompt(menu)), - sym && !sym_has_value(sym) ? "(NEW)" : ""); - - if (opt_mode == OPT_ALL && !menu_is_visible(menu)) - row[COL_COLOR] = g_strdup("DarkGray"); - else if (opt_mode == OPT_PROMPT && - menu_has_prompt(menu) && !menu_is_visible(menu)) - row[COL_COLOR] = g_strdup("DarkGray"); - else - row[COL_COLOR] = g_strdup("Black"); - - ptype = menu->prompt ? menu->prompt->type : P_UNKNOWN; - switch (ptype) { - case P_MENU: - row[COL_PIXBUF] = (gchar *) xpm_menu; - if (view_mode == SINGLE_VIEW) - row[COL_PIXVIS] = GINT_TO_POINTER(TRUE); - row[COL_BTNVIS] = GINT_TO_POINTER(FALSE); - break; - case P_COMMENT: - row[COL_PIXBUF] = (gchar *) xpm_void; - row[COL_PIXVIS] = GINT_TO_POINTER(FALSE); - row[COL_BTNVIS] = GINT_TO_POINTER(FALSE); - break; - default: - row[COL_PIXBUF] = (gchar *) xpm_void; - row[COL_PIXVIS] = GINT_TO_POINTER(FALSE); - row[COL_BTNVIS] = GINT_TO_POINTER(TRUE); - break; - } - - if (!sym) - return row; - row[COL_NAME] = g_strdup(sym->name); - - sym_calc_value(sym); - sym->flags &= ~SYMBOL_CHANGED; - - if (sym_is_choice(sym)) { // parse childs for getting final value - struct menu *child; - struct symbol *def_sym = sym_get_choice_value(sym); - struct menu *def_menu = NULL; - - row[COL_BTNVIS] = GINT_TO_POINTER(FALSE); - - for (child = menu->list; child; child = child->next) { - if (menu_is_visible(child) - && child->sym == def_sym) - def_menu = child; - } - - if (def_menu) - row[COL_VALUE] = - g_strdup(_(menu_get_prompt(def_menu))); - } - if (sym->flags & SYMBOL_CHOICEVAL) - row[COL_BTNRAD] = GINT_TO_POINTER(TRUE); - - stype = sym_get_type(sym); - switch (stype) { - case S_BOOLEAN: - if (GPOINTER_TO_INT(row[COL_PIXVIS]) == FALSE) - row[COL_BTNVIS] = GINT_TO_POINTER(TRUE); - if (sym_is_choice(sym)) - break; - /* fall through */ - case S_TRISTATE: - val = sym_get_tristate_value(sym); - switch (val) { - case no: - row[COL_NO] = g_strdup("N"); - row[COL_VALUE] = g_strdup("N"); - row[COL_BTNACT] = GINT_TO_POINTER(FALSE); - row[COL_BTNINC] = GINT_TO_POINTER(FALSE); - break; - case mod: - row[COL_MOD] = g_strdup("M"); - row[COL_VALUE] = g_strdup("M"); - row[COL_BTNINC] = GINT_TO_POINTER(TRUE); - break; - case yes: - row[COL_YES] = g_strdup("Y"); - row[COL_VALUE] = g_strdup("Y"); - row[COL_BTNACT] = GINT_TO_POINTER(TRUE); - row[COL_BTNINC] = GINT_TO_POINTER(FALSE); - break; - } - - if (val != no && sym_tristate_within_range(sym, no)) - row[COL_NO] = g_strdup("_"); - if (val != mod && sym_tristate_within_range(sym, mod)) - row[COL_MOD] = g_strdup("_"); - if (val != yes && sym_tristate_within_range(sym, yes)) - row[COL_YES] = g_strdup("_"); - break; - case S_INT: - case S_HEX: - case S_STRING: - def = sym_get_string_value(sym); - row[COL_VALUE] = g_strdup(def); - row[COL_EDIT] = GINT_TO_POINTER(TRUE); - row[COL_BTNVIS] = GINT_TO_POINTER(FALSE); - break; - } - - return row; -} - - -/* Set the node content with a row of strings */ -static void set_node(GtkTreeIter * node, struct menu *menu, gchar ** row) -{ - GdkColor color; - gboolean success; - GdkPixbuf *pix; - - pix = gdk_pixbuf_new_from_xpm_data((const char **) - row[COL_PIXBUF]); - - gdk_color_parse(row[COL_COLOR], &color); - gdk_colormap_alloc_colors(gdk_colormap_get_system(), &color, 1, - FALSE, FALSE, &success); - - gtk_tree_store_set(tree, node, - COL_OPTION, row[COL_OPTION], - COL_NAME, row[COL_NAME], - COL_NO, row[COL_NO], - COL_MOD, row[COL_MOD], - COL_YES, row[COL_YES], - COL_VALUE, row[COL_VALUE], - COL_MENU, (gpointer) menu, - COL_COLOR, &color, - COL_EDIT, GPOINTER_TO_INT(row[COL_EDIT]), - COL_PIXBUF, pix, - COL_PIXVIS, GPOINTER_TO_INT(row[COL_PIXVIS]), - COL_BTNVIS, GPOINTER_TO_INT(row[COL_BTNVIS]), - COL_BTNACT, GPOINTER_TO_INT(row[COL_BTNACT]), - COL_BTNINC, GPOINTER_TO_INT(row[COL_BTNINC]), - COL_BTNRAD, GPOINTER_TO_INT(row[COL_BTNRAD]), - -1); - - g_object_unref(pix); -} - - -/* Add a node to the tree */ -static void place_node(struct menu *menu, char **row) -{ - GtkTreeIter *parent = parents[indent - 1]; - GtkTreeIter *node = parents[indent]; - - gtk_tree_store_append(tree, node, parent); - set_node(node, menu, row); -} - - -/* Find a node in the GTK+ tree */ -static GtkTreeIter found; - -/* - * Find a menu in the GtkTree starting at parent. - */ -GtkTreeIter *gtktree_iter_find_node(GtkTreeIter * parent, - struct menu *tofind) -{ - GtkTreeIter iter; - GtkTreeIter *child = &iter; - gboolean valid; - GtkTreeIter *ret; - - valid = gtk_tree_model_iter_children(model2, child, parent); - while (valid) { - struct menu *menu; - - gtk_tree_model_get(model2, child, 6, &menu, -1); - - if (menu == tofind) { - memcpy(&found, child, sizeof(GtkTreeIter)); - return &found; - } - - ret = gtktree_iter_find_node(child, tofind); - if (ret) - return ret; - - valid = gtk_tree_model_iter_next(model2, child); - } - - return NULL; -} - - -/* - * Update the tree by adding/removing entries - * Does not change other nodes - */ -static void update_tree(struct menu *src, GtkTreeIter * dst) -{ - struct menu *child1; - GtkTreeIter iter, tmp; - GtkTreeIter *child2 = &iter; - gboolean valid; - GtkTreeIter *sibling; - struct symbol *sym; - struct menu *menu1, *menu2; - - if (src == &rootmenu) - indent = 1; - - valid = gtk_tree_model_iter_children(model2, child2, dst); - for (child1 = src->list; child1; child1 = child1->next) { - - sym = child1->sym; - - reparse: - menu1 = child1; - if (valid) - gtk_tree_model_get(model2, child2, COL_MENU, - &menu2, -1); - else - menu2 = NULL; // force adding of a first child - -#ifdef DEBUG - printf("%*c%s | %s\n", indent, ' ', - menu1 ? menu_get_prompt(menu1) : "nil", - menu2 ? menu_get_prompt(menu2) : "nil"); -#endif - - if ((opt_mode == OPT_NORMAL && !menu_is_visible(child1)) || - (opt_mode == OPT_PROMPT && !menu_has_prompt(child1)) || - (opt_mode == OPT_ALL && !menu_get_prompt(child1))) { - - /* remove node */ - if (gtktree_iter_find_node(dst, menu1) != NULL) { - memcpy(&tmp, child2, sizeof(GtkTreeIter)); - valid = gtk_tree_model_iter_next(model2, - child2); - gtk_tree_store_remove(tree2, &tmp); - if (!valid) - return; /* next parent */ - else - goto reparse; /* next child */ - } else - continue; - } - - if (menu1 != menu2) { - if (gtktree_iter_find_node(dst, menu1) == NULL) { // add node - if (!valid && !menu2) - sibling = NULL; - else - sibling = child2; - gtk_tree_store_insert_before(tree2, - child2, - dst, sibling); - set_node(child2, menu1, fill_row(menu1)); - if (menu2 == NULL) - valid = TRUE; - } else { // remove node - memcpy(&tmp, child2, sizeof(GtkTreeIter)); - valid = gtk_tree_model_iter_next(model2, - child2); - gtk_tree_store_remove(tree2, &tmp); - if (!valid) - return; // next parent - else - goto reparse; // next child - } - } else if (sym && (sym->flags & SYMBOL_CHANGED)) { - set_node(child2, menu1, fill_row(menu1)); - } - - indent++; - update_tree(child1, child2); - indent--; - - valid = gtk_tree_model_iter_next(model2, child2); - } -} - - -/* Display the whole tree (single/split/full view) */ -static void display_tree(struct menu *menu) -{ - struct symbol *sym; - struct property *prop; - struct menu *child; - enum prop_type ptype; - - if (menu == &rootmenu) { - indent = 1; - current = &rootmenu; - } - - for (child = menu->list; child; child = child->next) { - prop = child->prompt; - sym = child->sym; - ptype = prop ? prop->type : P_UNKNOWN; - - if (sym) - sym->flags &= ~SYMBOL_CHANGED; - - if ((view_mode == SPLIT_VIEW) - && !(child->flags & MENU_ROOT) && (tree == tree1)) - continue; - - if ((view_mode == SPLIT_VIEW) && (child->flags & MENU_ROOT) - && (tree == tree2)) - continue; - - if ((opt_mode == OPT_NORMAL && menu_is_visible(child)) || - (opt_mode == OPT_PROMPT && menu_has_prompt(child)) || - (opt_mode == OPT_ALL && menu_get_prompt(child))) - place_node(child, fill_row(child)); -#ifdef DEBUG - printf("%*c%s: ", indent, ' ', menu_get_prompt(child)); - printf("%s", child->flags & MENU_ROOT ? "rootmenu | " : ""); - printf("%s", prop_get_type_name(ptype)); - printf(" | "); - if (sym) { - printf("%s", sym_type_name(sym->type)); - printf(" | "); - printf("%s", dbg_sym_flags(sym->flags)); - printf("\n"); - } else - printf("\n"); -#endif - if ((view_mode != FULL_VIEW) && (ptype == P_MENU) - && (tree == tree2)) - continue; -/* - if (((menu != &rootmenu) && !(menu->flags & MENU_ROOT)) - || (view_mode == FULL_VIEW) - || (view_mode == SPLIT_VIEW))*/ - - /* Change paned position if the view is not in 'split mode' */ - if (view_mode == SINGLE_VIEW || view_mode == FULL_VIEW) { - gtk_paned_set_position(GTK_PANED(hpaned), 0); - } - - if (((view_mode == SINGLE_VIEW) && (menu->flags & MENU_ROOT)) - || (view_mode == FULL_VIEW) - || (view_mode == SPLIT_VIEW)) { - indent++; - display_tree(child); - indent--; - } - } -} - -/* Display a part of the tree starting at current node (single/split view) */ -static void display_tree_part(void) -{ - if (tree2) - gtk_tree_store_clear(tree2); - if (view_mode == SINGLE_VIEW) - display_tree(current); - else if (view_mode == SPLIT_VIEW) - display_tree(browsed); - gtk_tree_view_expand_all(GTK_TREE_VIEW(tree2_w)); -} - -/* Display the list in the left frame (split view) */ -static void display_list(void) -{ - if (tree1) - gtk_tree_store_clear(tree1); - - tree = tree1; - display_tree(&rootmenu); - gtk_tree_view_expand_all(GTK_TREE_VIEW(tree1_w)); - tree = tree2; -} - -void fixup_rootmenu(struct menu *menu) -{ - struct menu *child; - static int menu_cnt = 0; - - menu->flags |= MENU_ROOT; - for (child = menu->list; child; child = child->next) { - if (child->prompt && child->prompt->type == P_MENU) { - menu_cnt++; - fixup_rootmenu(child); - menu_cnt--; - } else if (!menu_cnt) - fixup_rootmenu(child); - } -} - - -/* Main */ -int main(int ac, char *av[]) -{ - const char *name; - char *env; - gchar *glade_file; - - bindtextdomain(PACKAGE, LOCALEDIR); - bind_textdomain_codeset(PACKAGE, "UTF-8"); - textdomain(PACKAGE); - - /* GTK stuffs */ - gtk_set_locale(); - gtk_init(&ac, &av); - glade_init(); - - //add_pixmap_directory (PACKAGE_DATA_DIR "/" PACKAGE "/pixmaps"); - //add_pixmap_directory (PACKAGE_SOURCE_DIR "/pixmaps"); - - /* Determine GUI path */ - env = getenv(SRCTREE); - if (env) - glade_file = g_strconcat(env, "/scripts/kconfig/gconf.glade", NULL); - else if (av[0][0] == '/') - glade_file = g_strconcat(av[0], ".glade", NULL); - else - glade_file = g_strconcat(g_get_current_dir(), "/", av[0], ".glade", NULL); - - /* Conf stuffs */ - if (ac > 1 && av[1][0] == '-') { - switch (av[1][1]) { - case 'a': - //showAll = 1; - break; - case 'h': - case '?': - printf("%s <config>\n", av[0]); - exit(0); - } - name = av[2]; - } else - name = av[1]; - - conf_parse(name); - fixup_rootmenu(&rootmenu); - conf_read(NULL); - - /* Load the interface and connect signals */ - init_main_window(glade_file); - init_tree_model(); - init_left_tree(); - init_right_tree(); - - switch (view_mode) { - case SINGLE_VIEW: - display_tree_part(); - break; - case SPLIT_VIEW: - display_list(); - break; - case FULL_VIEW: - display_tree(&rootmenu); - break; - } - - gtk_main(); - - return 0; -} - -static void conf_changed(void) -{ - bool changed = conf_get_changed(); - gtk_widget_set_sensitive(save_btn, changed); - gtk_widget_set_sensitive(save_menu_item, changed); -} diff --git a/payloads/external/SeaBIOS/scripts/kconfig/gconf.glade b/payloads/external/SeaBIOS/scripts/kconfig/gconf.glade deleted file mode 100644 index aa483cb3..00000000 --- a/payloads/external/SeaBIOS/scripts/kconfig/gconf.glade +++ /dev/null @@ -1,661 +0,0 @@ -<?xml version="1.0" standalone="no"?> <!--*- mode: xml -*--> - -<glade-interface> - -<widget class="GtkWindow" id="window1"> - <property name="visible">True</property> - <property name="title" translatable="yes">Gtk Kernel Configurator</property> - <property name="type">GTK_WINDOW_TOPLEVEL</property> - <property name="window_position">GTK_WIN_POS_NONE</property> - <property name="modal">False</property> - <property name="default_width">640</property> - <property name="default_height">480</property> - <property name="resizable">True</property> - <property name="destroy_with_parent">False</property> - <property name="decorated">True</property> - <property name="skip_taskbar_hint">False</property> - <property name="skip_pager_hint">False</property> - <property name="type_hint">GDK_WINDOW_TYPE_HINT_NORMAL</property> - <property name="gravity">GDK_GRAVITY_NORTH_WEST</property> - <signal name="destroy" handler="on_window1_destroy" object="window1"/> - <signal name="size_request" handler="on_window1_size_request" object="vpaned1" last_modification_time="Fri, 11 Jan 2002 16:17:11 GMT"/> - <signal name="delete_event" handler="on_window1_delete_event" object="window1" last_modification_time="Sun, 09 Mar 2003 19:42:46 GMT"/> - - <child> - <widget class="GtkVBox" id="vbox1"> - <property name="visible">True</property> - <property name="homogeneous">False</property> - <property name="spacing">0</property> - - <child> - <widget class="GtkMenuBar" id="menubar1"> - <property name="visible">True</property> - - <child> - <widget class="GtkMenuItem" id="file1"> - <property name="visible">True</property> - <property name="label" translatable="yes">_File</property> - <property name="use_underline">True</property> - - <child> - <widget class="GtkMenu" id="file1_menu"> - - <child> - <widget class="GtkImageMenuItem" id="load1"> - <property name="visible">True</property> - <property name="tooltip" translatable="yes">Load a config file</property> - <property name="label" translatable="yes">_Load</property> - <property name="use_underline">True</property> - <signal name="activate" handler="on_load1_activate"/> - <accelerator key="L" modifiers="GDK_CONTROL_MASK" signal="activate"/> - - <child internal-child="image"> - <widget class="GtkImage" id="image39"> - <property name="visible">True</property> - <property name="stock">gtk-open</property> - <property name="icon_size">1</property> - <property name="xalign">0.5</property> - <property name="yalign">0.5</property> - <property name="xpad">0</property> - <property name="ypad">0</property> - </widget> - </child> - </widget> - </child> - - <child> - <widget class="GtkImageMenuItem" id="save1"> - <property name="visible">True</property> - <property name="tooltip" translatable="yes">Save the config in .config</property> - <property name="label" translatable="yes">_Save</property> - <property name="use_underline">True</property> - <signal name="activate" handler="on_save_activate"/> - <accelerator key="S" modifiers="GDK_CONTROL_MASK" signal="activate"/> - - <child internal-child="image"> - <widget class="GtkImage" id="image40"> - <property name="visible">True</property> - <property name="stock">gtk-save</property> - <property name="icon_size">1</property> - <property name="xalign">0.5</property> - <property name="yalign">0.5</property> - <property name="xpad">0</property> - <property name="ypad">0</property> - </widget> - </child> - </widget> - </child> - - <child> - <widget class="GtkImageMenuItem" id="save_as1"> - <property name="visible">True</property> - <property name="tooltip" translatable="yes">Save the config in a file</property> - <property name="label" translatable="yes">Save _as</property> - <property name="use_underline">True</property> - <signal name="activate" handler="on_save_as1_activate"/> - - <child internal-child="image"> - <widget class="GtkImage" id="image41"> - <property name="visible">True</property> - <property name="stock">gtk-save-as</property> - <property name="icon_size">1</property> - <property name="xalign">0.5</property> - <property name="yalign">0.5</property> - <property name="xpad">0</property> - <property name="ypad">0</property> - </widget> - </child> - </widget> - </child> - - <child> - <widget class="GtkSeparatorMenuItem" id="separator1"> - <property name="visible">True</property> - </widget> - </child> - - <child> - <widget class="GtkImageMenuItem" id="quit1"> - <property name="visible">True</property> - <property name="label" translatable="yes">_Quit</property> - <property name="use_underline">True</property> - <signal name="activate" handler="on_quit1_activate"/> - <accelerator key="Q" modifiers="GDK_CONTROL_MASK" signal="activate"/> - - <child internal-child="image"> - <widget class="GtkImage" id="image42"> - <property name="visible">True</property> - <property name="stock">gtk-quit</property> - <property name="icon_size">1</property> - <property name="xalign">0.5</property> - <property name="yalign">0.5</property> - <property name="xpad">0</property> - <property name="ypad">0</property> - </widget> - </child> - </widget> - </child> - </widget> - </child> - </widget> - </child> - - <child> - <widget class="GtkMenuItem" id="options1"> - <property name="visible">True</property> - <property name="label" translatable="yes">_Options</property> - <property name="use_underline">True</property> - - <child> - <widget class="GtkMenu" id="options1_menu"> - - <child> - <widget class="GtkCheckMenuItem" id="show_name1"> - <property name="visible">True</property> - <property name="tooltip" translatable="yes">Show name</property> - <property name="label" translatable="yes">Show _name</property> - <property name="use_underline">True</property> - <property name="active">False</property> - <signal name="activate" handler="on_show_name1_activate"/> - </widget> - </child> - - <child> - <widget class="GtkCheckMenuItem" id="show_range1"> - <property name="visible">True</property> - <property name="tooltip" translatable="yes">Show range (Y/M/N)</property> - <property name="label" translatable="yes">Show _range</property> - <property name="use_underline">True</property> - <property name="active">False</property> - <signal name="activate" handler="on_show_range1_activate"/> - </widget> - </child> - - <child> - <widget class="GtkCheckMenuItem" id="show_data1"> - <property name="visible">True</property> - <property name="tooltip" translatable="yes">Show value of the option</property> - <property name="label" translatable="yes">Show _data</property> - <property name="use_underline">True</property> - <property name="active">False</property> - <signal name="activate" handler="on_show_data1_activate"/> - </widget> - </child> - - <child> - <widget class="GtkSeparatorMenuItem" id="separator2"> - <property name="visible">True</property> - </widget> - </child> - - <child> - <widget class="GtkRadioMenuItem" id="set_option_mode1"> - <property name="visible">True</property> - <property name="tooltip" translatable="yes">Show normal options</property> - <property name="label" translatable="yes">Show normal options</property> - <property name="use_underline">True</property> - <property name="active">True</property> - <signal name="activate" handler="on_set_option_mode1_activate"/> - </widget> - </child> - - <child> - <widget class="GtkRadioMenuItem" id="set_option_mode2"> - <property name="visible">True</property> - <property name="tooltip" translatable="yes">Show all options</property> - <property name="label" translatable="yes">Show all _options</property> - <property name="use_underline">True</property> - <property name="active">False</property> - <property name="group">set_option_mode1</property> - <signal name="activate" handler="on_set_option_mode2_activate"/> - </widget> - </child> - - <child> - <widget class="GtkRadioMenuItem" id="set_option_mode3"> - <property name="visible">True</property> - <property name="tooltip" translatable="yes">Show all options with prompts</property> - <property name="label" translatable="yes">Show all prompt options</property> - <property name="use_underline">True</property> - <property name="active">False</property> - <property name="group">set_option_mode1</property> - <signal name="activate" handler="on_set_option_mode3_activate"/> - </widget> - </child> - - </widget> - </child> - </widget> - </child> - - <child> - <widget class="GtkMenuItem" id="help1"> - <property name="visible">True</property> - <property name="label" translatable="yes">_Help</property> - <property name="use_underline">True</property> - - <child> - <widget class="GtkMenu" id="help1_menu"> - - <child> - <widget class="GtkImageMenuItem" id="introduction1"> - <property name="visible">True</property> - <property name="label" translatable="yes">_Introduction</property> - <property name="use_underline">True</property> - <signal name="activate" handler="on_introduction1_activate" last_modification_time="Fri, 15 Nov 2002 20:26:30 GMT"/> - <accelerator key="I" modifiers="GDK_CONTROL_MASK" signal="activate"/> - - <child internal-child="image"> - <widget class="GtkImage" id="image43"> - <property name="visible">True</property> - <property name="stock">gtk-dialog-question</property> - <property name="icon_size">1</property> - <property name="xalign">0.5</property> - <property name="yalign">0.5</property> - <property name="xpad">0</property> - <property name="ypad">0</property> - </widget> - </child> - </widget> - </child> - - <child> - <widget class="GtkImageMenuItem" id="about1"> - <property name="visible">True</property> - <property name="label" translatable="yes">_About</property> - <property name="use_underline">True</property> - <signal name="activate" handler="on_about1_activate" last_modification_time="Fri, 15 Nov 2002 20:26:30 GMT"/> - <accelerator key="A" modifiers="GDK_CONTROL_MASK" signal="activate"/> - - <child internal-child="image"> - <widget class="GtkImage" id="image44"> - <property name="visible">True</property> - <property name="stock">gtk-properties</property> - <property name="icon_size">1</property> - <property name="xalign">0.5</property> - <property name="yalign">0.5</property> - <property name="xpad">0</property> - <property name="ypad">0</property> - </widget> - </child> - </widget> - </child> - - <child> - <widget class="GtkImageMenuItem" id="license1"> - <property name="visible">True</property> - <property name="label" translatable="yes">_License</property> - <property name="use_underline">True</property> - <signal name="activate" handler="on_license1_activate" last_modification_time="Fri, 15 Nov 2002 20:26:30 GMT"/> - - <child internal-child="image"> - <widget class="GtkImage" id="image45"> - <property name="visible">True</property> - <property name="stock">gtk-justify-fill</property> - <property name="icon_size">1</property> - <property name="xalign">0.5</property> - <property name="yalign">0.5</property> - <property name="xpad">0</property> - <property name="ypad">0</property> - </widget> - </child> - </widget> - </child> - </widget> - </child> - </widget> - </child> - </widget> - <packing> - <property name="padding">0</property> - <property name="expand">False</property> - <property name="fill">False</property> - </packing> - </child> - - <child> - <widget class="GtkHandleBox" id="handlebox1"> - <property name="visible">True</property> - <property name="shadow_type">GTK_SHADOW_OUT</property> - <property name="handle_position">GTK_POS_LEFT</property> - <property name="snap_edge">GTK_POS_TOP</property> - - <child> - <widget class="GtkToolbar" id="toolbar1"> - <property name="visible">True</property> - <property name="orientation">GTK_ORIENTATION_HORIZONTAL</property> - <property name="toolbar_style">GTK_TOOLBAR_BOTH</property> - <property name="tooltips">True</property> - <property name="show_arrow">True</property> - - <child> - <widget class="GtkToolButton" id="button1"> - <property name="visible">True</property> - <property name="tooltip" translatable="yes">Goes up of one level (single view)</property> - <property name="label" translatable="yes">Back</property> - <property name="use_underline">True</property> - <property name="stock_id">gtk-undo</property> - <property name="visible_horizontal">True</property> - <property name="visible_vertical">True</property> - <property name="is_important">False</property> - <signal name="clicked" handler="on_back_clicked"/> - </widget> - <packing> - <property name="expand">False</property> - <property name="homogeneous">True</property> - </packing> - </child> - - <child> - <widget class="GtkToolItem" id="toolitem1"> - <property name="visible">True</property> - <property name="visible_horizontal">True</property> - <property name="visible_vertical">True</property> - <property name="is_important">False</property> - - <child> - <widget class="GtkVSeparator" id="vseparator1"> - <property name="visible">True</property> - </widget> - </child> - </widget> - <packing> - <property name="expand">False</property> - <property name="homogeneous">False</property> - </packing> - </child> - - <child> - <widget class="GtkToolButton" id="button2"> - <property name="visible">True</property> - <property name="tooltip" translatable="yes">Load a config file</property> - <property name="label" translatable="yes">Load</property> - <property name="use_underline">True</property> - <property name="stock_id">gtk-open</property> - <property name="visible_horizontal">True</property> - <property name="visible_vertical">True</property> - <property name="is_important">False</property> - <signal name="clicked" handler="on_load_clicked"/> - </widget> - <packing> - <property name="expand">False</property> - <property name="homogeneous">True</property> - </packing> - </child> - - <child> - <widget class="GtkToolButton" id="button3"> - <property name="visible">True</property> - <property name="tooltip" translatable="yes">Save a config file</property> - <property name="label" translatable="yes">Save</property> - <property name="use_underline">True</property> - <property name="stock_id">gtk-save</property> - <property name="visible_horizontal">True</property> - <property name="visible_vertical">True</property> - <property name="is_important">False</property> - <signal name="clicked" handler="on_save_activate"/> - </widget> - <packing> - <property name="expand">False</property> - <property name="homogeneous">True</property> - </packing> - </child> - - <child> - <widget class="GtkToolItem" id="toolitem2"> - <property name="visible">True</property> - <property name="visible_horizontal">True</property> - <property name="visible_vertical">True</property> - <property name="is_important">False</property> - - <child> - <widget class="GtkVSeparator" id="vseparator2"> - <property name="visible">True</property> - </widget> - </child> - </widget> - <packing> - <property name="expand">False</property> - <property name="homogeneous">False</property> - </packing> - </child> - - <child> - <widget class="GtkToolButton" id="button4"> - <property name="visible">True</property> - <property name="tooltip" translatable="yes">Single view</property> - <property name="label" translatable="yes">Single</property> - <property name="use_underline">True</property> - <property name="stock_id">gtk-missing-image</property> - <property name="visible_horizontal">True</property> - <property name="visible_vertical">True</property> - <property name="is_important">False</property> - <signal name="clicked" handler="on_single_clicked" last_modification_time="Sun, 12 Jan 2003 14:28:39 GMT"/> - </widget> - <packing> - <property name="expand">False</property> - <property name="homogeneous">True</property> - </packing> - </child> - - <child> - <widget class="GtkToolButton" id="button5"> - <property name="visible">True</property> - <property name="tooltip" translatable="yes">Split view</property> - <property name="label" translatable="yes">Split</property> - <property name="use_underline">True</property> - <property name="stock_id">gtk-missing-image</property> - <property name="visible_horizontal">True</property> - <property name="visible_vertical">True</property> - <property name="is_important">False</property> - <signal name="clicked" handler="on_split_clicked" last_modification_time="Sun, 12 Jan 2003 14:28:45 GMT"/> - </widget> - <packing> - <property name="expand">False</property> - <property name="homogeneous">True</property> - </packing> - </child> - - <child> - <widget class="GtkToolButton" id="button6"> - <property name="visible">True</property> - <property name="tooltip" translatable="yes">Full view</property> - <property name="label" translatable="yes">Full</property> - <property name="use_underline">True</property> - <property name="stock_id">gtk-missing-image</property> - <property name="visible_horizontal">True</property> - <property name="visible_vertical">True</property> - <property name="is_important">False</property> - <signal name="clicked" handler="on_full_clicked" last_modification_time="Sun, 12 Jan 2003 14:28:50 GMT"/> - </widget> - <packing> - <property name="expand">False</property> - <property name="homogeneous">True</property> - </packing> - </child> - - <child> - <widget class="GtkToolItem" id="toolitem3"> - <property name="visible">True</property> - <property name="visible_horizontal">True</property> - <property name="visible_vertical">True</property> - <property name="is_important">False</property> - - <child> - <widget class="GtkVSeparator" id="vseparator3"> - <property name="visible">True</property> - </widget> - </child> - </widget> - <packing> - <property name="expand">False</property> - <property name="homogeneous">False</property> - </packing> - </child> - - <child> - <widget class="GtkToolButton" id="button7"> - <property name="visible">True</property> - <property name="tooltip" translatable="yes">Collapse the whole tree in the right frame</property> - <property name="label" translatable="yes">Collapse</property> - <property name="use_underline">True</property> - <property name="stock_id">gtk-remove</property> - <property name="visible_horizontal">True</property> - <property name="visible_vertical">True</property> - <property name="is_important">False</property> - <signal name="clicked" handler="on_collapse_clicked"/> - </widget> - <packing> - <property name="expand">False</property> - <property name="homogeneous">True</property> - </packing> - </child> - - <child> - <widget class="GtkToolButton" id="button8"> - <property name="visible">True</property> - <property name="tooltip" translatable="yes">Expand the whole tree in the right frame</property> - <property name="label" translatable="yes">Expand</property> - <property name="use_underline">True</property> - <property name="stock_id">gtk-add</property> - <property name="visible_horizontal">True</property> - <property name="visible_vertical">True</property> - <property name="is_important">False</property> - <signal name="clicked" handler="on_expand_clicked"/> - </widget> - <packing> - <property name="expand">False</property> - <property name="homogeneous">True</property> - </packing> - </child> - </widget> - </child> - </widget> - <packing> - <property name="padding">0</property> - <property name="expand">False</property> - <property name="fill">False</property> - </packing> - </child> - - <child> - <widget class="GtkHPaned" id="hpaned1"> - <property name="width_request">1</property> - <property name="visible">True</property> - <property name="can_focus">True</property> - <property name="position">0</property> - - <child> - <widget class="GtkScrolledWindow" id="scrolledwindow1"> - <property name="visible">True</property> - <property name="hscrollbar_policy">GTK_POLICY_AUTOMATIC</property> - <property name="vscrollbar_policy">GTK_POLICY_AUTOMATIC</property> - <property name="shadow_type">GTK_SHADOW_IN</property> - <property name="window_placement">GTK_CORNER_TOP_LEFT</property> - - <child> - <widget class="GtkTreeView" id="treeview1"> - <property name="visible">True</property> - <property name="can_focus">True</property> - <property name="headers_visible">True</property> - <property name="rules_hint">False</property> - <property name="reorderable">False</property> - <property name="enable_search">False</property> - <signal name="cursor_changed" handler="on_treeview2_cursor_changed" last_modification_time="Sun, 12 Jan 2003 15:58:22 GMT"/> - <signal name="button_press_event" handler="on_treeview1_button_press_event" last_modification_time="Sun, 12 Jan 2003 16:03:52 GMT"/> - <signal name="key_press_event" handler="on_treeview2_key_press_event" last_modification_time="Sun, 12 Jan 2003 16:11:44 GMT"/> - </widget> - </child> - </widget> - <packing> - <property name="shrink">True</property> - <property name="resize">False</property> - </packing> - </child> - - <child> - <widget class="GtkVPaned" id="vpaned1"> - <property name="visible">True</property> - <property name="can_focus">True</property> - <property name="position">0</property> - - <child> - <widget class="GtkScrolledWindow" id="scrolledwindow2"> - <property name="visible">True</property> - <property name="hscrollbar_policy">GTK_POLICY_AUTOMATIC</property> - <property name="vscrollbar_policy">GTK_POLICY_AUTOMATIC</property> - <property name="shadow_type">GTK_SHADOW_IN</property> - <property name="window_placement">GTK_CORNER_TOP_LEFT</property> - - <child> - <widget class="GtkTreeView" id="treeview2"> - <property name="visible">True</property> - <property name="can_focus">True</property> - <property name="has_focus">True</property> - <property name="headers_visible">True</property> - <property name="rules_hint">False</property> - <property name="reorderable">False</property> - <property name="enable_search">False</property> - <signal name="cursor_changed" handler="on_treeview2_cursor_changed" last_modification_time="Sun, 12 Jan 2003 15:57:55 GMT"/> - <signal name="button_press_event" handler="on_treeview2_button_press_event" last_modification_time="Sun, 12 Jan 2003 15:57:58 GMT"/> - <signal name="key_press_event" handler="on_treeview2_key_press_event" last_modification_time="Sun, 12 Jan 2003 15:58:01 GMT"/> - </widget> - </child> - </widget> - <packing> - <property name="shrink">True</property> - <property name="resize">False</property> - </packing> - </child> - - <child> - <widget class="GtkScrolledWindow" id="scrolledwindow3"> - <property name="visible">True</property> - <property name="hscrollbar_policy">GTK_POLICY_NEVER</property> - <property name="vscrollbar_policy">GTK_POLICY_AUTOMATIC</property> - <property name="shadow_type">GTK_SHADOW_IN</property> - <property name="window_placement">GTK_CORNER_TOP_LEFT</property> - - <child> - <widget class="GtkTextView" id="textview3"> - <property name="visible">True</property> - <property name="can_focus">True</property> - <property name="editable">False</property> - <property name="overwrite">False</property> - <property name="accepts_tab">True</property> - <property name="justification">GTK_JUSTIFY_LEFT</property> - <property name="wrap_mode">GTK_WRAP_WORD</property> - <property name="cursor_visible">True</property> - <property name="pixels_above_lines">0</property> - <property name="pixels_below_lines">0</property> - <property name="pixels_inside_wrap">0</property> - <property name="left_margin">0</property> - <property name="right_margin">0</property> - <property name="indent">0</property> - <property name="text" translatable="yes">Sorry, no help available for this option yet.</property> - </widget> - </child> - </widget> - <packing> - <property name="shrink">True</property> - <property name="resize">True</property> - </packing> - </child> - </widget> - <packing> - <property name="shrink">True</property> - <property name="resize">True</property> - </packing> - </child> - </widget> - <packing> - <property name="padding">0</property> - <property name="expand">True</property> - <property name="fill">True</property> - </packing> - </child> - </widget> - </child> -</widget> - -</glade-interface> diff --git a/payloads/external/SeaBIOS/scripts/kconfig/images.c b/payloads/external/SeaBIOS/scripts/kconfig/images.c deleted file mode 100644 index d4f84bd4..00000000 --- a/payloads/external/SeaBIOS/scripts/kconfig/images.c +++ /dev/null @@ -1,326 +0,0 @@ -/* - * Copyright (C) 2002 Roman Zippel <zippel@linux-m68k.org> - * Released under the terms of the GNU GPL v2.0. - */ - -static const char *xpm_load[] = { -"22 22 5 1", -". c None", -"# c #000000", -"c c #838100", -"a c #ffff00", -"b c #ffffff", -"......................", -"......................", -"......................", -"............####....#.", -"...........#....##.##.", -"..................###.", -".................####.", -".####...........#####.", -"#abab##########.......", -"#babababababab#.......", -"#ababababababa#.......", -"#babababababab#.......", -"#ababab###############", -"#babab##cccccccccccc##", -"#abab##cccccccccccc##.", -"#bab##cccccccccccc##..", -"#ab##cccccccccccc##...", -"#b##cccccccccccc##....", -"###cccccccccccc##.....", -"##cccccccccccc##......", -"###############.......", -"......................"}; - -static const char *xpm_save[] = { -"22 22 5 1", -". c None", -"# c #000000", -"a c #838100", -"b c #c5c2c5", -"c c #cdb6d5", -"......................", -".####################.", -".#aa#bbbbbbbbbbbb#bb#.", -".#aa#bbbbbbbbbbbb#bb#.", -".#aa#bbbbbbbbbcbb####.", -".#aa#bbbccbbbbbbb#aa#.", -".#aa#bbbccbbbbbbb#aa#.", -".#aa#bbbbbbbbbbbb#aa#.", -".#aa#bbbbbbbbbbbb#aa#.", -".#aa#bbbbbbbbbbbb#aa#.", -".#aa#bbbbbbbbbbbb#aa#.", -".#aaa############aaa#.", -".#aaaaaaaaaaaaaaaaaa#.", -".#aaaaaaaaaaaaaaaaaa#.", -".#aaa#############aa#.", -".#aaa#########bbb#aa#.", -".#aaa#########bbb#aa#.", -".#aaa#########bbb#aa#.", -".#aaa#########bbb#aa#.", -".#aaa#########bbb#aa#.", -"..##################..", -"......................"}; - -static const char *xpm_back[] = { -"22 22 3 1", -". c None", -"# c #000083", -"a c #838183", -"......................", -"......................", -"......................", -"......................", -"......................", -"...........######a....", -"..#......##########...", -"..##...####......##a..", -"..###.###.........##..", -"..######..........##..", -"..#####...........##..", -"..######..........##..", -"..#######.........##..", -"..########.......##a..", -"...............a###...", -"...............###....", -"......................", -"......................", -"......................", -"......................", -"......................", -"......................"}; - -static const char *xpm_tree_view[] = { -"22 22 2 1", -". c None", -"# c #000000", -"......................", -"......................", -"......#...............", -"......#...............", -"......#...............", -"......#...............", -"......#...............", -"......########........", -"......#...............", -"......#...............", -"......#...............", -"......#...............", -"......#...............", -"......########........", -"......#...............", -"......#...............", -"......#...............", -"......#...............", -"......#...............", -"......########........", -"......................", -"......................"}; - -static const char *xpm_single_view[] = { -"22 22 2 1", -". c None", -"# c #000000", -"......................", -"......................", -"..........#...........", -"..........#...........", -"..........#...........", -"..........#...........", -"..........#...........", -"..........#...........", -"..........#...........", -"..........#...........", -"..........#...........", -"..........#...........", -"..........#...........", -"..........#...........", -"..........#...........", -"..........#...........", -"..........#...........", -"..........#...........", -"..........#...........", -"..........#...........", -"......................", -"......................"}; - -static const char *xpm_split_view[] = { -"22 22 2 1", -". c None", -"# c #000000", -"......................", -"......................", -"......#......#........", -"......#......#........", -"......#......#........", -"......#......#........", -"......#......#........", -"......#......#........", -"......#......#........", -"......#......#........", -"......#......#........", -"......#......#........", -"......#......#........", -"......#......#........", -"......#......#........", -"......#......#........", -"......#......#........", -"......#......#........", -"......#......#........", -"......#......#........", -"......................", -"......................"}; - -static const char *xpm_symbol_no[] = { -"12 12 2 1", -" c white", -". c black", -" ", -" .......... ", -" . . ", -" . . ", -" . . ", -" . . ", -" . . ", -" . . ", -" . . ", -" . . ", -" .......... ", -" "}; - -static const char *xpm_symbol_mod[] = { -"12 12 2 1", -" c white", -". c black", -" ", -" .......... ", -" . . ", -" . . ", -" . .. . ", -" . .... . ", -" . .... . ", -" . .. . ", -" . . ", -" . . ", -" .......... ", -" "}; - -static const char *xpm_symbol_yes[] = { -"12 12 2 1", -" c white", -". c black", -" ", -" .......... ", -" . . ", -" . . ", -" . . . ", -" . .. . ", -" . . .. . ", -" . .... . ", -" . .. . ", -" . . ", -" .......... ", -" "}; - -static const char *xpm_choice_no[] = { -"12 12 2 1", -" c white", -". c black", -" ", -" .... ", -" .. .. ", -" . . ", -" . . ", -" . . ", -" . . ", -" . . ", -" . . ", -" .. .. ", -" .... ", -" "}; - -static const char *xpm_choice_yes[] = { -"12 12 2 1", -" c white", -". c black", -" ", -" .... ", -" .. .. ", -" . . ", -" . .. . ", -" . .... . ", -" . .... . ", -" . .. . ", -" . . ", -" .. .. ", -" .... ", -" "}; - -static const char *xpm_menu[] = { -"12 12 2 1", -" c white", -". c black", -" ", -" .......... ", -" . . ", -" . .. . ", -" . .... . ", -" . ...... . ", -" . ...... . ", -" . .... . ", -" . .. . ", -" . . ", -" .......... ", -" "}; - -static const char *xpm_menu_inv[] = { -"12 12 2 1", -" c white", -". c black", -" ", -" .......... ", -" .......... ", -" .. ...... ", -" .. .... ", -" .. .. ", -" .. .. ", -" .. .... ", -" .. ...... ", -" .......... ", -" .......... ", -" "}; - -static const char *xpm_menuback[] = { -"12 12 2 1", -" c white", -". c black", -" ", -" .......... ", -" . . ", -" . .. . ", -" . .... . ", -" . ...... . ", -" . ...... . ", -" . .... . ", -" . .. . ", -" . . ", -" .......... ", -" "}; - -static const char *xpm_void[] = { -"12 12 2 1", -" c white", -". c black", -" ", -" ", -" ", -" ", -" ", -" ", -" ", -" ", -" ", -" ", -" ", -" "}; diff --git a/payloads/external/SeaBIOS/scripts/kconfig/kxgettext.c b/payloads/external/SeaBIOS/scripts/kconfig/kxgettext.c deleted file mode 100644 index 2858738b..00000000 --- a/payloads/external/SeaBIOS/scripts/kconfig/kxgettext.c +++ /dev/null @@ -1,235 +0,0 @@ -/* - * Arnaldo Carvalho de Melo <acme@conectiva.com.br>, 2005 - * - * Released under the terms of the GNU GPL v2.0 - */ - -#include <stdlib.h> -#include <string.h> - -#include "lkc.h" - -static char *escape(const char* text, char *bf, int len) -{ - char *bfp = bf; - int multiline = strchr(text, '\n') != NULL; - int eol = 0; - int textlen = strlen(text); - - if ((textlen > 0) && (text[textlen-1] == '\n')) - eol = 1; - - *bfp++ = '"'; - --len; - - if (multiline) { - *bfp++ = '"'; - *bfp++ = '\n'; - *bfp++ = '"'; - len -= 3; - } - - while (*text != '\0' && len > 1) { - if (*text == '"') - *bfp++ = '\\'; - else if (*text == '\n') { - *bfp++ = '\\'; - *bfp++ = 'n'; - *bfp++ = '"'; - *bfp++ = '\n'; - *bfp++ = '"'; - len -= 5; - ++text; - goto next; - } - else if (*text == '\\') { - *bfp++ = '\\'; - len--; - } - *bfp++ = *text++; -next: - --len; - } - - if (multiline && eol) - bfp -= 3; - - *bfp++ = '"'; - *bfp = '\0'; - - return bf; -} - -struct file_line { - struct file_line *next; - const char *file; - int lineno; -}; - -static struct file_line *file_line__new(const char *file, int lineno) -{ - struct file_line *self = malloc(sizeof(*self)); - - if (self == NULL) - goto out; - - self->file = file; - self->lineno = lineno; - self->next = NULL; -out: - return self; -} - -struct message { - const char *msg; - const char *option; - struct message *next; - struct file_line *files; -}; - -static struct message *message__list; - -static struct message *message__new(const char *msg, char *option, - const char *file, int lineno) -{ - struct message *self = malloc(sizeof(*self)); - - if (self == NULL) - goto out; - - self->files = file_line__new(file, lineno); - if (self->files == NULL) - goto out_fail; - - self->msg = strdup(msg); - if (self->msg == NULL) - goto out_fail_msg; - - self->option = option; - self->next = NULL; -out: - return self; -out_fail_msg: - free(self->files); -out_fail: - free(self); - self = NULL; - goto out; -} - -static struct message *mesage__find(const char *msg) -{ - struct message *m = message__list; - - while (m != NULL) { - if (strcmp(m->msg, msg) == 0) - break; - m = m->next; - } - - return m; -} - -static int message__add_file_line(struct message *self, const char *file, - int lineno) -{ - int rc = -1; - struct file_line *fl = file_line__new(file, lineno); - - if (fl == NULL) - goto out; - - fl->next = self->files; - self->files = fl; - rc = 0; -out: - return rc; -} - -static int message__add(const char *msg, char *option, const char *file, - int lineno) -{ - int rc = 0; - char bf[16384]; - char *escaped = escape(msg, bf, sizeof(bf)); - struct message *m = mesage__find(escaped); - - if (m != NULL) - rc = message__add_file_line(m, file, lineno); - else { - m = message__new(escaped, option, file, lineno); - - if (m != NULL) { - m->next = message__list; - message__list = m; - } else - rc = -1; - } - return rc; -} - -static void menu_build_message_list(struct menu *menu) -{ - struct menu *child; - - message__add(menu_get_prompt(menu), NULL, - menu->file == NULL ? "Root Menu" : menu->file->name, - menu->lineno); - - if (menu->sym != NULL && menu_has_help(menu)) - message__add(menu_get_help(menu), menu->sym->name, - menu->file == NULL ? "Root Menu" : menu->file->name, - menu->lineno); - - for (child = menu->list; child != NULL; child = child->next) - if (child->prompt != NULL) - menu_build_message_list(child); -} - -static void message__print_file_lineno(struct message *self) -{ - struct file_line *fl = self->files; - - putchar('\n'); - if (self->option != NULL) - printf("# %s:00000\n", self->option); - - printf("#: %s:%d", fl->file, fl->lineno); - fl = fl->next; - - while (fl != NULL) { - printf(", %s:%d", fl->file, fl->lineno); - fl = fl->next; - } - - putchar('\n'); -} - -static void message__print_gettext_msgid_msgstr(struct message *self) -{ - message__print_file_lineno(self); - - printf("msgid %s\n" - "msgstr \"\"\n", self->msg); -} - -static void menu__xgettext(void) -{ - struct message *m = message__list; - - while (m != NULL) { - /* skip empty lines ("") */ - if (strlen(m->msg) > sizeof("\"\"")) - message__print_gettext_msgid_msgstr(m); - m = m->next; - } -} - -int main(int ac, char **av) -{ - conf_parse(av[1]); - - menu_build_message_list(menu_get_root_menu(NULL)); - menu__xgettext(); - return 0; -} diff --git a/payloads/external/SeaBIOS/scripts/kconfig/lex.zconf.c b/payloads/external/SeaBIOS/scripts/kconfig/lex.zconf.c deleted file mode 100644 index 6eb03971..00000000 --- a/payloads/external/SeaBIOS/scripts/kconfig/lex.zconf.c +++ /dev/null @@ -1,2430 +0,0 @@ - -#line 3 "scripts/kconfig/lex.zconf.c" - -#define YY_INT_ALIGNED short int - -/* A lexical scanner generated by flex */ - -#define yy_create_buffer zconf_create_buffer -#define yy_delete_buffer zconf_delete_buffer -#define yy_flex_debug zconf_flex_debug -#define yy_init_buffer zconf_init_buffer -#define yy_flush_buffer zconf_flush_buffer -#define yy_load_buffer_state zconf_load_buffer_state -#define yy_switch_to_buffer zconf_switch_to_buffer -#define yyin zconfin -#define yyleng zconfleng -#define yylex zconflex -#define yylineno zconflineno -#define yyout zconfout -#define yyrestart zconfrestart -#define yytext zconftext -#define yywrap zconfwrap -#define yyalloc zconfalloc -#define yyrealloc zconfrealloc -#define yyfree zconffree - -#define FLEX_SCANNER -#define YY_FLEX_MAJOR_VERSION 2 -#define YY_FLEX_MINOR_VERSION 5 -#define YY_FLEX_SUBMINOR_VERSION 35 -#if YY_FLEX_SUBMINOR_VERSION > 0 -#define FLEX_BETA -#endif - -/* First, we deal with platform-specific or compiler-specific issues. */ - -/* begin standard C headers. */ -#include <stdio.h> -#include <string.h> -#include <errno.h> -#include <stdlib.h> - -/* end standard C headers. */ - -/* flex integer type definitions */ - -#ifndef FLEXINT_H -#define FLEXINT_H - -/* C99 systems have <inttypes.h>. Non-C99 systems may or may not. */ - -#if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L - -/* C99 says to define __STDC_LIMIT_MACROS before including stdint.h, - * if you want the limit (max/min) macros for int types. - */ -#ifndef __STDC_LIMIT_MACROS -#define __STDC_LIMIT_MACROS 1 -#endif - -#include <inttypes.h> -typedef int8_t flex_int8_t; -typedef uint8_t flex_uint8_t; -typedef int16_t flex_int16_t; -typedef uint16_t flex_uint16_t; -typedef int32_t flex_int32_t; -typedef uint32_t flex_uint32_t; -#else -typedef signed char flex_int8_t; -typedef short int flex_int16_t; -typedef int flex_int32_t; -typedef unsigned char flex_uint8_t; -typedef unsigned short int flex_uint16_t; -typedef unsigned int flex_uint32_t; - -/* Limits of integral types. */ -#ifndef INT8_MIN -#define INT8_MIN (-128) -#endif -#ifndef INT16_MIN -#define INT16_MIN (-32767-1) -#endif -#ifndef INT32_MIN -#define INT32_MIN (-2147483647-1) -#endif -#ifndef INT8_MAX -#define INT8_MAX (127) -#endif -#ifndef INT16_MAX -#define INT16_MAX (32767) -#endif -#ifndef INT32_MAX -#define INT32_MAX (2147483647) -#endif -#ifndef UINT8_MAX -#define UINT8_MAX (255U) -#endif -#ifndef UINT16_MAX -#define UINT16_MAX (65535U) -#endif -#ifndef UINT32_MAX -#define UINT32_MAX (4294967295U) -#endif - -#endif /* ! C99 */ - -#endif /* ! FLEXINT_H */ - -#ifdef __cplusplus - -/* The "const" storage-class-modifier is valid. */ -#define YY_USE_CONST - -#else /* ! __cplusplus */ - -/* C99 requires __STDC__ to be defined as 1. */ -#if defined (__STDC__) - -#define YY_USE_CONST - -#endif /* defined (__STDC__) */ -#endif /* ! __cplusplus */ - -#ifdef YY_USE_CONST -#define yyconst const -#else -#define yyconst -#endif - -/* Returned upon end-of-file. */ -#define YY_NULL 0 - -/* Promotes a possibly negative, possibly signed char to an unsigned - * integer for use as an array index. If the signed char is negative, - * we want to instead treat it as an 8-bit unsigned char, hence the - * double cast. - */ -#define YY_SC_TO_UI(c) ((unsigned int) (unsigned char) c) - -/* Enter a start condition. This macro really ought to take a parameter, - * but we do it the disgusting crufty way forced on us by the ()-less - * definition of BEGIN. - */ -#define BEGIN (yy_start) = 1 + 2 * - -/* Translate the current start state into a value that can be later handed - * to BEGIN to return to the state. The YYSTATE alias is for lex - * compatibility. - */ -#define YY_START (((yy_start) - 1) / 2) -#define YYSTATE YY_START - -/* Action number for EOF rule of a given start state. */ -#define YY_STATE_EOF(state) (YY_END_OF_BUFFER + state + 1) - -/* Special action meaning "start processing a new file". */ -#define YY_NEW_FILE zconfrestart(zconfin ) - -#define YY_END_OF_BUFFER_CHAR 0 - -/* Size of default input buffer. */ -#ifndef YY_BUF_SIZE -#ifdef __ia64__ -/* On IA-64, the buffer size is 16k, not 8k. - * Moreover, YY_BUF_SIZE is 2*YY_READ_BUF_SIZE in the general case. - * Ditto for the __ia64__ case accordingly. - */ -#define YY_BUF_SIZE 32768 -#else -#define YY_BUF_SIZE 16384 -#endif /* __ia64__ */ -#endif - -/* The state buf must be large enough to hold one state per character in the main buffer. - */ -#define YY_STATE_BUF_SIZE ((YY_BUF_SIZE + 2) * sizeof(yy_state_type)) - -#ifndef YY_TYPEDEF_YY_BUFFER_STATE -#define YY_TYPEDEF_YY_BUFFER_STATE -typedef struct yy_buffer_state *YY_BUFFER_STATE; -#endif - -extern int zconfleng; - -extern FILE *zconfin, *zconfout; - -#define EOB_ACT_CONTINUE_SCAN 0 -#define EOB_ACT_END_OF_FILE 1 -#define EOB_ACT_LAST_MATCH 2 - - #define YY_LESS_LINENO(n) - -/* Return all but the first "n" matched characters back to the input stream. */ -#define yyless(n) \ - do \ - { \ - /* Undo effects of setting up zconftext. */ \ - int yyless_macro_arg = (n); \ - YY_LESS_LINENO(yyless_macro_arg);\ - *yy_cp = (yy_hold_char); \ - YY_RESTORE_YY_MORE_OFFSET \ - (yy_c_buf_p) = yy_cp = yy_bp + yyless_macro_arg - YY_MORE_ADJ; \ - YY_DO_BEFORE_ACTION; /* set up zconftext again */ \ - } \ - while ( 0 ) - -#define unput(c) yyunput( c, (yytext_ptr) ) - -#ifndef YY_TYPEDEF_YY_SIZE_T -#define YY_TYPEDEF_YY_SIZE_T -typedef size_t yy_size_t; -#endif - -#ifndef YY_STRUCT_YY_BUFFER_STATE -#define YY_STRUCT_YY_BUFFER_STATE -struct yy_buffer_state - { - FILE *yy_input_file; - - char *yy_ch_buf; /* input buffer */ - char *yy_buf_pos; /* current position in input buffer */ - - /* Size of input buffer in bytes, not including room for EOB - * characters. - */ - yy_size_t yy_buf_size; - - /* Number of characters read into yy_ch_buf, not including EOB - * characters. - */ - int yy_n_chars; - - /* Whether we "own" the buffer - i.e., we know we created it, - * and can realloc() it to grow it, and should free() it to - * delete it. - */ - int yy_is_our_buffer; - - /* Whether this is an "interactive" input source; if so, and - * if we're using stdio for input, then we want to use getc() - * instead of fread(), to make sure we stop fetching input after - * each newline. - */ - int yy_is_interactive; - - /* Whether we're considered to be at the beginning of a line. - * If so, '^' rules will be active on the next match, otherwise - * not. - */ - int yy_at_bol; - - int yy_bs_lineno; /**< The line count. */ - int yy_bs_column; /**< The column count. */ - - /* Whether to try to fill the input buffer when we reach the - * end of it. - */ - int yy_fill_buffer; - - int yy_buffer_status; - -#define YY_BUFFER_NEW 0 -#define YY_BUFFER_NORMAL 1 - /* When an EOF's been seen but there's still some text to process - * then we mark the buffer as YY_EOF_PENDING, to indicate that we - * shouldn't try reading from the input source any more. We might - * still have a bunch of tokens to match, though, because of - * possible backing-up. - * - * When we actually see the EOF, we change the status to "new" - * (via zconfrestart()), so that the user can continue scanning by - * just pointing zconfin at a new input file. - */ -#define YY_BUFFER_EOF_PENDING 2 - - }; -#endif /* !YY_STRUCT_YY_BUFFER_STATE */ - -/* Stack of input buffers. */ -static size_t yy_buffer_stack_top = 0; /**< index of top of stack. */ -static size_t yy_buffer_stack_max = 0; /**< capacity of stack. */ -static YY_BUFFER_STATE * yy_buffer_stack = 0; /**< Stack as an array. */ - -/* We provide macros for accessing buffer states in case in the - * future we want to put the buffer states in a more general - * "scanner state". - * - * Returns the top of the stack, or NULL. - */ -#define YY_CURRENT_BUFFER ( (yy_buffer_stack) \ - ? (yy_buffer_stack)[(yy_buffer_stack_top)] \ - : NULL) - -/* Same as previous macro, but useful when we know that the buffer stack is not - * NULL or when we need an lvalue. For internal use only. - */ -#define YY_CURRENT_BUFFER_LVALUE (yy_buffer_stack)[(yy_buffer_stack_top)] - -/* yy_hold_char holds the character lost when zconftext is formed. */ -static char yy_hold_char; -static int yy_n_chars; /* number of characters read into yy_ch_buf */ -int zconfleng; - -/* Points to current character in buffer. */ -static char *yy_c_buf_p = (char *) 0; -static int yy_init = 0; /* whether we need to initialize */ -static int yy_start = 0; /* start state number */ - -/* Flag which is used to allow zconfwrap()'s to do buffer switches - * instead of setting up a fresh zconfin. A bit of a hack ... - */ -static int yy_did_buffer_switch_on_eof; - -void zconfrestart (FILE *input_file ); -void zconf_switch_to_buffer (YY_BUFFER_STATE new_buffer ); -YY_BUFFER_STATE zconf_create_buffer (FILE *file,int size ); -void zconf_delete_buffer (YY_BUFFER_STATE b ); -void zconf_flush_buffer (YY_BUFFER_STATE b ); -void zconfpush_buffer_state (YY_BUFFER_STATE new_buffer ); -void zconfpop_buffer_state (void ); - -static void zconfensure_buffer_stack (void ); -static void zconf_load_buffer_state (void ); -static void zconf_init_buffer (YY_BUFFER_STATE b,FILE *file ); - -#define YY_FLUSH_BUFFER zconf_flush_buffer(YY_CURRENT_BUFFER ) - -YY_BUFFER_STATE zconf_scan_buffer (char *base,yy_size_t size ); -YY_BUFFER_STATE zconf_scan_string (yyconst char *yy_str ); -YY_BUFFER_STATE zconf_scan_bytes (yyconst char *bytes,int len ); - -void *zconfalloc (yy_size_t ); -void *zconfrealloc (void *,yy_size_t ); -void zconffree (void * ); - -#define yy_new_buffer zconf_create_buffer - -#define yy_set_interactive(is_interactive) \ - { \ - if ( ! YY_CURRENT_BUFFER ){ \ - zconfensure_buffer_stack (); \ - YY_CURRENT_BUFFER_LVALUE = \ - zconf_create_buffer(zconfin,YY_BUF_SIZE ); \ - } \ - YY_CURRENT_BUFFER_LVALUE->yy_is_interactive = is_interactive; \ - } - -#define yy_set_bol(at_bol) \ - { \ - if ( ! YY_CURRENT_BUFFER ){\ - zconfensure_buffer_stack (); \ - YY_CURRENT_BUFFER_LVALUE = \ - zconf_create_buffer(zconfin,YY_BUF_SIZE ); \ - } \ - YY_CURRENT_BUFFER_LVALUE->yy_at_bol = at_bol; \ - } - -#define YY_AT_BOL() (YY_CURRENT_BUFFER_LVALUE->yy_at_bol) - -/* Begin user sect3 */ - -#define zconfwrap(n) 1 -#define YY_SKIP_YYWRAP - -typedef unsigned char YY_CHAR; - -FILE *zconfin = (FILE *) 0, *zconfout = (FILE *) 0; - -typedef int yy_state_type; - -extern int zconflineno; - -int zconflineno = 1; - -extern char *zconftext; -#define yytext_ptr zconftext -static yyconst flex_int16_t yy_nxt[][17] = - { - { - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0 - }, - - { - 11, 12, 13, 14, 12, 12, 15, 12, 12, 12, - 12, 12, 12, 12, 12, 12, 12 - }, - - { - 11, 12, 13, 14, 12, 12, 15, 12, 12, 12, - 12, 12, 12, 12, 12, 12, 12 - }, - - { - 11, 16, 16, 17, 16, 16, 16, 16, 16, 16, - 16, 16, 16, 18, 16, 16, 16 - }, - - { - 11, 16, 16, 17, 16, 16, 16, 16, 16, 16, - 16, 16, 16, 18, 16, 16, 16 - - }, - - { - 11, 19, 20, 21, 19, 19, 19, 19, 19, 19, - 19, 19, 19, 19, 19, 19, 19 - }, - - { - 11, 19, 20, 21, 19, 19, 19, 19, 19, 19, - 19, 19, 19, 19, 19, 19, 19 - }, - - { - 11, 22, 22, 23, 22, 24, 22, 22, 24, 22, - 22, 22, 22, 22, 22, 25, 22 - }, - - { - 11, 22, 22, 23, 22, 24, 22, 22, 24, 22, - 22, 22, 22, 22, 22, 25, 22 - }, - - { - 11, 26, 26, 27, 28, 29, 30, 31, 29, 32, - 33, 34, 35, 35, 36, 37, 38 - - }, - - { - 11, 26, 26, 27, 28, 29, 30, 31, 29, 32, - 33, 34, 35, 35, 36, 37, 38 - }, - - { - -11, -11, -11, -11, -11, -11, -11, -11, -11, -11, - -11, -11, -11, -11, -11, -11, -11 - }, - - { - 11, -12, -12, -12, -12, -12, -12, -12, -12, -12, - -12, -12, -12, -12, -12, -12, -12 - }, - - { - 11, -13, 39, 40, -13, -13, 41, -13, -13, -13, - -13, -13, -13, -13, -13, -13, -13 - }, - - { - 11, -14, -14, -14, -14, -14, -14, -14, -14, -14, - -14, -14, -14, -14, -14, -14, -14 - - }, - - { - 11, 42, 42, 43, 42, 42, 42, 42, 42, 42, - 42, 42, 42, 42, 42, 42, 42 - }, - - { - 11, -16, -16, -16, -16, -16, -16, -16, -16, -16, - -16, -16, -16, -16, -16, -16, -16 - }, - - { - 11, -17, -17, -17, -17, -17, -17, -17, -17, -17, - -17, -17, -17, -17, -17, -17, -17 - }, - - { - 11, -18, -18, -18, -18, -18, -18, -18, -18, -18, - -18, -18, -18, 44, -18, -18, -18 - }, - - { - 11, 45, 45, -19, 45, 45, 45, 45, 45, 45, - 45, 45, 45, 45, 45, 45, 45 - - }, - - { - 11, -20, 46, 47, -20, -20, -20, -20, -20, -20, - -20, -20, -20, -20, -20, -20, -20 - }, - - { - 11, 48, -21, -21, 48, 48, 48, 48, 48, 48, - 48, 48, 48, 48, 48, 48, 48 - }, - - { - 11, 49, 49, 50, 49, -22, 49, 49, -22, 49, - 49, 49, 49, 49, 49, -22, 49 - }, - - { - 11, -23, -23, -23, -23, -23, -23, -23, -23, -23, - -23, -23, -23, -23, -23, -23, -23 - }, - - { - 11, -24, -24, -24, -24, -24, -24, -24, -24, -24, - -24, -24, -24, -24, -24, -24, -24 - - }, - - { - 11, 51, 51, 52, 51, 51, 51, 51, 51, 51, - 51, 51, 51, 51, 51, 51, 51 - }, - - { - 11, -26, -26, -26, -26, -26, -26, -26, -26, -26, - -26, -26, -26, -26, -26, -26, -26 - }, - - { - 11, -27, -27, -27, -27, -27, -27, -27, -27, -27, - -27, -27, -27, -27, -27, -27, -27 - }, - - { - 11, -28, -28, -28, -28, -28, -28, -28, -28, -28, - -28, -28, -28, -28, 53, -28, -28 - }, - - { - 11, -29, -29, -29, -29, -29, -29, -29, -29, -29, - -29, -29, -29, -29, -29, -29, -29 - - }, - - { - 11, 54, 54, -30, 54, 54, 54, 54, 54, 54, - 54, 54, 54, 54, 54, 54, 54 - }, - - { - 11, -31, -31, -31, -31, -31, -31, 55, -31, -31, - -31, -31, -31, -31, -31, -31, -31 - }, - - { - 11, -32, -32, -32, -32, -32, -32, -32, -32, -32, - -32, -32, -32, -32, -32, -32, -32 - }, - - { - 11, -33, -33, -33, -33, -33, -33, -33, -33, -33, - -33, -33, -33, -33, -33, -33, -33 - }, - - { - 11, -34, -34, -34, -34, -34, -34, -34, -34, -34, - -34, 56, 57, 57, -34, -34, -34 - - }, - - { - 11, -35, -35, -35, -35, -35, -35, -35, -35, -35, - -35, 57, 57, 57, -35, -35, -35 - }, - - { - 11, -36, -36, -36, -36, -36, -36, -36, -36, -36, - -36, -36, -36, -36, -36, -36, -36 - }, - - { - 11, -37, -37, 58, -37, -37, -37, -37, -37, -37, - -37, -37, -37, -37, -37, -37, -37 - }, - - { - 11, -38, -38, -38, -38, -38, -38, -38, -38, -38, - -38, -38, -38, -38, -38, -38, 59 - }, - - { - 11, -39, 39, 40, -39, -39, 41, -39, -39, -39, - -39, -39, -39, -39, -39, -39, -39 - - }, - - { - 11, -40, -40, -40, -40, -40, -40, -40, -40, -40, - -40, -40, -40, -40, -40, -40, -40 - }, - - { - 11, 42, 42, 43, 42, 42, 42, 42, 42, 42, - 42, 42, 42, 42, 42, 42, 42 - }, - - { - 11, 42, 42, 43, 42, 42, 42, 42, 42, 42, - 42, 42, 42, 42, 42, 42, 42 - }, - - { - 11, -43, -43, -43, -43, -43, -43, -43, -43, -43, - -43, -43, -43, -43, -43, -43, -43 - }, - - { - 11, -44, -44, -44, -44, -44, -44, -44, -44, -44, - -44, -44, -44, 44, -44, -44, -44 - - }, - - { - 11, 45, 45, -45, 45, 45, 45, 45, 45, 45, - 45, 45, 45, 45, 45, 45, 45 - }, - - { - 11, -46, 46, 47, -46, -46, -46, -46, -46, -46, - -46, -46, -46, -46, -46, -46, -46 - }, - - { - 11, 48, -47, -47, 48, 48, 48, 48, 48, 48, - 48, 48, 48, 48, 48, 48, 48 - }, - - { - 11, -48, -48, -48, -48, -48, -48, -48, -48, -48, - -48, -48, -48, -48, -48, -48, -48 - }, - - { - 11, 49, 49, 50, 49, -49, 49, 49, -49, 49, - 49, 49, 49, 49, 49, -49, 49 - - }, - - { - 11, -50, -50, -50, -50, -50, -50, -50, -50, -50, - -50, -50, -50, -50, -50, -50, -50 - }, - - { - 11, -51, -51, 52, -51, -51, -51, -51, -51, -51, - -51, -51, -51, -51, -51, -51, -51 - }, - - { - 11, -52, -52, -52, -52, -52, -52, -52, -52, -52, - -52, -52, -52, -52, -52, -52, -52 - }, - - { - 11, -53, -53, -53, -53, -53, -53, -53, -53, -53, - -53, -53, -53, -53, -53, -53, -53 - }, - - { - 11, 54, 54, -54, 54, 54, 54, 54, 54, 54, - 54, 54, 54, 54, 54, 54, 54 - - }, - - { - 11, -55, -55, -55, -55, -55, -55, -55, -55, -55, - -55, -55, -55, -55, -55, -55, -55 - }, - - { - 11, -56, -56, -56, -56, -56, -56, -56, -56, -56, - -56, 60, 57, 57, -56, -56, -56 - }, - - { - 11, -57, -57, -57, -57, -57, -57, -57, -57, -57, - -57, 57, 57, 57, -57, -57, -57 - }, - - { - 11, -58, -58, -58, -58, -58, -58, -58, -58, -58, - -58, -58, -58, -58, -58, -58, -58 - }, - - { - 11, -59, -59, -59, -59, -59, -59, -59, -59, -59, - -59, -59, -59, -59, -59, -59, -59 - - }, - - { - 11, -60, -60, -60, -60, -60, -60, -60, -60, -60, - -60, 57, 57, 57, -60, -60, -60 - }, - - } ; - -static yy_state_type yy_get_previous_state (void ); -static yy_state_type yy_try_NUL_trans (yy_state_type current_state ); -static int yy_get_next_buffer (void ); -static void yy_fatal_error (yyconst char msg[] ); - -/* Done after the current pattern has been matched and before the - * corresponding action - sets up zconftext. - */ -#define YY_DO_BEFORE_ACTION \ - (yytext_ptr) = yy_bp; \ - zconfleng = (size_t) (yy_cp - yy_bp); \ - (yy_hold_char) = *yy_cp; \ - *yy_cp = '\0'; \ - (yy_c_buf_p) = yy_cp; - -#define YY_NUM_RULES 33 -#define YY_END_OF_BUFFER 34 -/* This struct is not used in this scanner, - but its presence is necessary. */ -struct yy_trans_info - { - flex_int32_t yy_verify; - flex_int32_t yy_nxt; - }; -static yyconst flex_int16_t yy_accept[61] = - { 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 34, 5, 4, 2, 3, 7, 8, 6, 32, 29, - 31, 24, 28, 27, 26, 22, 17, 13, 16, 20, - 22, 11, 12, 19, 19, 14, 22, 22, 4, 2, - 3, 3, 1, 6, 32, 29, 31, 30, 24, 23, - 26, 25, 15, 20, 9, 19, 19, 21, 10, 18 - } ; - -static yyconst flex_int32_t yy_ec[256] = - { 0, - 1, 1, 1, 1, 1, 1, 1, 1, 2, 3, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 2, 4, 5, 6, 1, 1, 7, 8, 9, - 10, 1, 1, 1, 11, 12, 12, 13, 13, 13, - 13, 13, 13, 13, 13, 13, 13, 1, 1, 1, - 14, 1, 1, 1, 13, 13, 13, 13, 13, 13, - 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, - 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, - 1, 15, 1, 1, 13, 1, 13, 13, 13, 13, - - 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, - 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, - 13, 13, 1, 16, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1 - } ; - -extern int zconf_flex_debug; -int zconf_flex_debug = 0; - -/* The intent behind this definition is that it'll catch - * any uses of REJECT which flex missed. - */ -#define REJECT reject_used_but_not_detected -#define yymore() yymore_used_but_not_detected -#define YY_MORE_ADJ 0 -#define YY_RESTORE_YY_MORE_OFFSET -char *zconftext; -#define YY_NO_INPUT 1 - -/* - * Copyright (C) 2002 Roman Zippel <zippel@linux-m68k.org> - * Released under the terms of the GNU GPL v2.0. - */ - -#include <limits.h> -#include <stdio.h> -#include <stdlib.h> -#include <string.h> -#include <unistd.h> - -#define LKC_DIRECT_LINK -#include "lkc.h" - -#define START_STRSIZE 16 - -static struct { - struct file *file; - int lineno; -} current_pos; - -static char *text; -static int text_size, text_asize; - -struct buffer { - struct buffer *parent; - YY_BUFFER_STATE state; -}; - -struct buffer *current_buf; - -static int last_ts, first_ts; - -static void zconf_endhelp(void); -static void zconf_endfile(void); - -static void new_string(void) -{ - text = malloc(START_STRSIZE); - text_asize = START_STRSIZE; - text_size = 0; - *text = 0; -} - -static void append_string(const char *str, int size) -{ - int new_size = text_size + size + 1; - if (new_size > text_asize) { - new_size += START_STRSIZE - 1; - new_size &= -START_STRSIZE; - text = realloc(text, new_size); - text_asize = new_size; - } - memcpy(text + text_size, str, size); - text_size += size; - text[text_size] = 0; -} - -static void alloc_string(const char *str, int size) -{ - text = malloc(size + 1); - memcpy(text, str, size); - text[size] = 0; -} - -#define INITIAL 0 -#define COMMAND 1 -#define HELP 2 -#define STRING 3 -#define PARAM 4 - -#ifndef YY_NO_UNISTD_H -/* Special case for "unistd.h", since it is non-ANSI. We include it way - * down here because we want the user's section 1 to have been scanned first. - * The user has a chance to override it with an option. - */ -#include <unistd.h> -#endif - -#ifndef YY_EXTRA_TYPE -#define YY_EXTRA_TYPE void * -#endif - -static int yy_init_globals (void ); - -/* Accessor methods to globals. - These are made visible to non-reentrant scanners for convenience. */ - -int zconflex_destroy (void ); - -int zconfget_debug (void ); - -void zconfset_debug (int debug_flag ); - -YY_EXTRA_TYPE zconfget_extra (void ); - -void zconfset_extra (YY_EXTRA_TYPE user_defined ); - -FILE *zconfget_in (void ); - -void zconfset_in (FILE * in_str ); - -FILE *zconfget_out (void ); - -void zconfset_out (FILE * out_str ); - -int zconfget_leng (void ); - -char *zconfget_text (void ); - -int zconfget_lineno (void ); - -void zconfset_lineno (int line_number ); - -/* Macros after this point can all be overridden by user definitions in - * section 1. - */ - -#ifndef YY_SKIP_YYWRAP -#ifdef __cplusplus -extern "C" int zconfwrap (void ); -#else -extern int zconfwrap (void ); -#endif -#endif - - static void yyunput (int c,char *buf_ptr ); - -#ifndef yytext_ptr -static void yy_flex_strncpy (char *,yyconst char *,int ); -#endif - -#ifdef YY_NEED_STRLEN -static int yy_flex_strlen (yyconst char * ); -#endif - -#ifndef YY_NO_INPUT - -#ifdef __cplusplus -static int yyinput (void ); -#else -static int input (void ); -#endif - -#endif - -/* Amount of stuff to slurp up with each read. */ -#ifndef YY_READ_BUF_SIZE -#ifdef __ia64__ -/* On IA-64, the buffer size is 16k, not 8k */ -#define YY_READ_BUF_SIZE 16384 -#else -#define YY_READ_BUF_SIZE 8192 -#endif /* __ia64__ */ -#endif - -/* Copy whatever the last rule matched to the standard output. */ -#ifndef ECHO -/* This used to be an fputs(), but since the string might contain NUL's, - * we now use fwrite(). - */ -#define ECHO do { if (fwrite( zconftext, zconfleng, 1, zconfout )) {} } while (0) -#endif - -/* Gets input and stuffs it into "buf". number of characters read, or YY_NULL, - * is returned in "result". - */ -#ifndef YY_INPUT -#define YY_INPUT(buf,result,max_size) \ - errno=0; \ - while ( (result = read( fileno(zconfin), (char *) buf, max_size )) < 0 ) \ - { \ - if( errno != EINTR) \ - { \ - YY_FATAL_ERROR( "input in flex scanner failed" ); \ - break; \ - } \ - errno=0; \ - clearerr(zconfin); \ - }\ -\ - -#endif - -/* No semi-colon after return; correct usage is to write "yyterminate();" - - * we don't want an extra ';' after the "return" because that will cause - * some compilers to complain about unreachable statements. - */ -#ifndef yyterminate -#define yyterminate() return YY_NULL -#endif - -/* Number of entries by which start-condition stack grows. */ -#ifndef YY_START_STACK_INCR -#define YY_START_STACK_INCR 25 -#endif - -/* Report a fatal error. */ -#ifndef YY_FATAL_ERROR -#define YY_FATAL_ERROR(msg) yy_fatal_error( msg ) -#endif - -/* end tables serialization structures and prototypes */ - -/* Default declaration of generated scanner - a define so the user can - * easily add parameters. - */ -#ifndef YY_DECL -#define YY_DECL_IS_OURS 1 - -extern int zconflex (void); - -#define YY_DECL int zconflex (void) -#endif /* !YY_DECL */ - -/* Code executed at the beginning of each rule, after zconftext and zconfleng - * have been set up. - */ -#ifndef YY_USER_ACTION -#define YY_USER_ACTION -#endif - -/* Code executed at the end of each rule. */ -#ifndef YY_BREAK -#define YY_BREAK break; -#endif - -#define YY_RULE_SETUP \ - YY_USER_ACTION - -/** The main scanner function which does all the work. - */ -YY_DECL -{ - register yy_state_type yy_current_state; - register char *yy_cp, *yy_bp; - register int yy_act; - - int str = 0; - int ts, i; - - if ( !(yy_init) ) - { - (yy_init) = 1; - -#ifdef YY_USER_INIT - YY_USER_INIT; -#endif - - if ( ! (yy_start) ) - (yy_start) = 1; /* first start state */ - - if ( ! zconfin ) - zconfin = stdin; - - if ( ! zconfout ) - zconfout = stdout; - - if ( ! YY_CURRENT_BUFFER ) { - zconfensure_buffer_stack (); - YY_CURRENT_BUFFER_LVALUE = - zconf_create_buffer(zconfin,YY_BUF_SIZE ); - } - - zconf_load_buffer_state( ); - } - - while ( 1 ) /* loops until end-of-file is reached */ - { - yy_cp = (yy_c_buf_p); - - /* Support of zconftext. */ - *yy_cp = (yy_hold_char); - - /* yy_bp points to the position in yy_ch_buf of the start of - * the current run. - */ - yy_bp = yy_cp; - - yy_current_state = (yy_start); -yy_match: - while ( (yy_current_state = yy_nxt[yy_current_state][ yy_ec[YY_SC_TO_UI(*yy_cp)] ]) > 0 ) - ++yy_cp; - - yy_current_state = -yy_current_state; - -yy_find_action: - yy_act = yy_accept[yy_current_state]; - - YY_DO_BEFORE_ACTION; - -do_action: /* This label is used only to access EOF actions. */ - - switch ( yy_act ) - { /* beginning of action switch */ -case 1: -/* rule 1 can match eol */ -case 2: -/* rule 2 can match eol */ -YY_RULE_SETUP -{ - current_file->lineno++; - return T_EOL; -} - YY_BREAK -case 3: -YY_RULE_SETUP - - YY_BREAK -case 4: -YY_RULE_SETUP -{ - BEGIN(COMMAND); -} - YY_BREAK -case 5: -YY_RULE_SETUP -{ - unput(zconftext[0]); - BEGIN(COMMAND); -} - YY_BREAK - -case 6: -YY_RULE_SETUP -{ - struct kconf_id *id = kconf_id_lookup(zconftext, zconfleng); - BEGIN(PARAM); - current_pos.file = current_file; - current_pos.lineno = current_file->lineno; - if (id && id->flags & TF_COMMAND) { - zconflval.id = id; - return id->token; - } - alloc_string(zconftext, zconfleng); - zconflval.string = text; - return T_WORD; - } - YY_BREAK -case 7: -YY_RULE_SETUP - - YY_BREAK -case 8: -/* rule 8 can match eol */ -YY_RULE_SETUP -{ - BEGIN(INITIAL); - current_file->lineno++; - return T_EOL; - } - YY_BREAK - -case 9: -YY_RULE_SETUP -return T_AND; - YY_BREAK -case 10: -YY_RULE_SETUP -return T_OR; - YY_BREAK -case 11: -YY_RULE_SETUP -return T_OPEN_PAREN; - YY_BREAK -case 12: -YY_RULE_SETUP -return T_CLOSE_PAREN; - YY_BREAK -case 13: -YY_RULE_SETUP -return T_NOT; - YY_BREAK -case 14: -YY_RULE_SETUP -return T_EQUAL; - YY_BREAK -case 15: -YY_RULE_SETUP -return T_UNEQUAL; - YY_BREAK -case 16: -YY_RULE_SETUP -{ - str = zconftext[0]; - new_string(); - BEGIN(STRING); - } - YY_BREAK -case 17: -/* rule 17 can match eol */ -YY_RULE_SETUP -BEGIN(INITIAL); current_file->lineno++; return T_EOL; - YY_BREAK -case 18: -YY_RULE_SETUP -/* ignore */ - YY_BREAK -case 19: -YY_RULE_SETUP -{ - struct kconf_id *id = kconf_id_lookup(zconftext, zconfleng); - if (id && id->flags & TF_PARAM) { - zconflval.id = id; - return id->token; - } - alloc_string(zconftext, zconfleng); - zconflval.string = text; - return T_WORD; - } - YY_BREAK -case 20: -YY_RULE_SETUP -/* comment */ - YY_BREAK -case 21: -/* rule 21 can match eol */ -YY_RULE_SETUP -current_file->lineno++; - YY_BREAK -case 22: -YY_RULE_SETUP - - YY_BREAK -case YY_STATE_EOF(PARAM): -{ - BEGIN(INITIAL); - } - YY_BREAK - -case 23: -/* rule 23 can match eol */ -*yy_cp = (yy_hold_char); /* undo effects of setting up zconftext */ -(yy_c_buf_p) = yy_cp -= 1; -YY_DO_BEFORE_ACTION; /* set up zconftext again */ -YY_RULE_SETUP -{ - append_string(zconftext, zconfleng); - zconflval.string = text; - return T_WORD_QUOTE; - } - YY_BREAK -case 24: -YY_RULE_SETUP -{ - append_string(zconftext, zconfleng); - } - YY_BREAK -case 25: -/* rule 25 can match eol */ -*yy_cp = (yy_hold_char); /* undo effects of setting up zconftext */ -(yy_c_buf_p) = yy_cp -= 1; -YY_DO_BEFORE_ACTION; /* set up zconftext again */ -YY_RULE_SETUP -{ - append_string(zconftext + 1, zconfleng - 1); - zconflval.string = text; - return T_WORD_QUOTE; - } - YY_BREAK -case 26: -YY_RULE_SETUP -{ - append_string(zconftext + 1, zconfleng - 1); - } - YY_BREAK -case 27: -YY_RULE_SETUP -{ - if (str == zconftext[0]) { - BEGIN(PARAM); - zconflval.string = text; - return T_WORD_QUOTE; - } else - append_string(zconftext, 1); - } - YY_BREAK -case 28: -/* rule 28 can match eol */ -YY_RULE_SETUP -{ - printf("%s:%d:warning: multi-line strings not supported\n", zconf_curname(), zconf_lineno()); - current_file->lineno++; - BEGIN(INITIAL); - return T_EOL; - } - YY_BREAK -case YY_STATE_EOF(STRING): -{ - BEGIN(INITIAL); - } - YY_BREAK - -case 29: -YY_RULE_SETUP -{ - ts = 0; - for (i = 0; i < zconfleng; i++) { - if (zconftext[i] == '\t') - ts = (ts & ~7) + 8; - else - ts++; - } - last_ts = ts; - if (first_ts) { - if (ts < first_ts) { - zconf_endhelp(); - return T_HELPTEXT; - } - ts -= first_ts; - while (ts > 8) { - append_string(" ", 8); - ts -= 8; - } - append_string(" ", ts); - } - } - YY_BREAK -case 30: -/* rule 30 can match eol */ -*yy_cp = (yy_hold_char); /* undo effects of setting up zconftext */ -(yy_c_buf_p) = yy_cp -= 1; -YY_DO_BEFORE_ACTION; /* set up zconftext again */ -YY_RULE_SETUP -{ - current_file->lineno++; - zconf_endhelp(); - return T_HELPTEXT; - } - YY_BREAK -case 31: -/* rule 31 can match eol */ -YY_RULE_SETUP -{ - current_file->lineno++; - append_string("\n", 1); - } - YY_BREAK -case 32: -YY_RULE_SETUP -{ - while (zconfleng) { - if ((zconftext[zconfleng-1] != ' ') && (zconftext[zconfleng-1] != '\t')) - break; - zconfleng--; - } - append_string(zconftext, zconfleng); - if (!first_ts) - first_ts = last_ts; - } - YY_BREAK -case YY_STATE_EOF(HELP): -{ - zconf_endhelp(); - return T_HELPTEXT; - } - YY_BREAK - -case YY_STATE_EOF(INITIAL): -case YY_STATE_EOF(COMMAND): -{ - if (current_file) { - zconf_endfile(); - return T_EOL; - } - fclose(zconfin); - yyterminate(); -} - YY_BREAK -case 33: -YY_RULE_SETUP -YY_FATAL_ERROR( "flex scanner jammed" ); - YY_BREAK - - case YY_END_OF_BUFFER: - { - /* Amount of text matched not including the EOB char. */ - int yy_amount_of_matched_text = (int) (yy_cp - (yytext_ptr)) - 1; - - /* Undo the effects of YY_DO_BEFORE_ACTION. */ - *yy_cp = (yy_hold_char); - YY_RESTORE_YY_MORE_OFFSET - - if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_NEW ) - { - /* We're scanning a new file or input source. It's - * possible that this happened because the user - * just pointed zconfin at a new source and called - * zconflex(). If so, then we have to assure - * consistency between YY_CURRENT_BUFFER and our - * globals. Here is the right place to do so, because - * this is the first action (other than possibly a - * back-up) that will match for the new input source. - */ - (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars; - YY_CURRENT_BUFFER_LVALUE->yy_input_file = zconfin; - YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = YY_BUFFER_NORMAL; - } - - /* Note that here we test for yy_c_buf_p "<=" to the position - * of the first EOB in the buffer, since yy_c_buf_p will - * already have been incremented past the NUL character - * (since all states make transitions on EOB to the - * end-of-buffer state). Contrast this with the test - * in input(). - */ - if ( (yy_c_buf_p) <= &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] ) - { /* This was really a NUL. */ - yy_state_type yy_next_state; - - (yy_c_buf_p) = (yytext_ptr) + yy_amount_of_matched_text; - - yy_current_state = yy_get_previous_state( ); - - /* Okay, we're now positioned to make the NUL - * transition. We couldn't have - * yy_get_previous_state() go ahead and do it - * for us because it doesn't know how to deal - * with the possibility of jamming (and we don't - * want to build jamming into it because then it - * will run more slowly). - */ - - yy_next_state = yy_try_NUL_trans( yy_current_state ); - - yy_bp = (yytext_ptr) + YY_MORE_ADJ; - - if ( yy_next_state ) - { - /* Consume the NUL. */ - yy_cp = ++(yy_c_buf_p); - yy_current_state = yy_next_state; - goto yy_match; - } - - else - { - yy_cp = (yy_c_buf_p); - goto yy_find_action; - } - } - - else switch ( yy_get_next_buffer( ) ) - { - case EOB_ACT_END_OF_FILE: - { - (yy_did_buffer_switch_on_eof) = 0; - - if ( zconfwrap( ) ) - { - /* Note: because we've taken care in - * yy_get_next_buffer() to have set up - * zconftext, we can now set up - * yy_c_buf_p so that if some total - * hoser (like flex itself) wants to - * call the scanner after we return the - * YY_NULL, it'll still work - another - * YY_NULL will get returned. - */ - (yy_c_buf_p) = (yytext_ptr) + YY_MORE_ADJ; - - yy_act = YY_STATE_EOF(YY_START); - goto do_action; - } - - else - { - if ( ! (yy_did_buffer_switch_on_eof) ) - YY_NEW_FILE; - } - break; - } - - case EOB_ACT_CONTINUE_SCAN: - (yy_c_buf_p) = - (yytext_ptr) + yy_amount_of_matched_text; - - yy_current_state = yy_get_previous_state( ); - - yy_cp = (yy_c_buf_p); - yy_bp = (yytext_ptr) + YY_MORE_ADJ; - goto yy_match; - - case EOB_ACT_LAST_MATCH: - (yy_c_buf_p) = - &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)]; - - yy_current_state = yy_get_previous_state( ); - - yy_cp = (yy_c_buf_p); - yy_bp = (yytext_ptr) + YY_MORE_ADJ; - goto yy_find_action; - } - break; - } - - default: - YY_FATAL_ERROR( - "fatal flex scanner internal error--no action found" ); - } /* end of action switch */ - } /* end of scanning one token */ -} /* end of zconflex */ - -/* yy_get_next_buffer - try to read in a new buffer - * - * Returns a code representing an action: - * EOB_ACT_LAST_MATCH - - * EOB_ACT_CONTINUE_SCAN - continue scanning from current position - * EOB_ACT_END_OF_FILE - end of file - */ -static int yy_get_next_buffer (void) -{ - register char *dest = YY_CURRENT_BUFFER_LVALUE->yy_ch_buf; - register char *source = (yytext_ptr); - register int number_to_move, i; - int ret_val; - - if ( (yy_c_buf_p) > &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] ) - YY_FATAL_ERROR( - "fatal flex scanner internal error--end of buffer missed" ); - - if ( YY_CURRENT_BUFFER_LVALUE->yy_fill_buffer == 0 ) - { /* Don't try to fill the buffer, so this is an EOF. */ - if ( (yy_c_buf_p) - (yytext_ptr) - YY_MORE_ADJ == 1 ) - { - /* We matched a single character, the EOB, so - * treat this as a final EOF. - */ - return EOB_ACT_END_OF_FILE; - } - - else - { - /* We matched some text prior to the EOB, first - * process it. - */ - return EOB_ACT_LAST_MATCH; - } - } - - /* Try to read more data. */ - - /* First move last chars to start of buffer. */ - number_to_move = (int) ((yy_c_buf_p) - (yytext_ptr)) - 1; - - for ( i = 0; i < number_to_move; ++i ) - *(dest++) = *(source++); - - if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_EOF_PENDING ) - /* don't do the read, it's not guaranteed to return an EOF, - * just force an EOF - */ - YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars) = 0; - - else - { - int num_to_read = - YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1; - - while ( num_to_read <= 0 ) - { /* Not enough room in the buffer - grow it. */ - - /* just a shorter name for the current buffer */ - YY_BUFFER_STATE b = YY_CURRENT_BUFFER; - - int yy_c_buf_p_offset = - (int) ((yy_c_buf_p) - b->yy_ch_buf); - - if ( b->yy_is_our_buffer ) - { - int new_size = b->yy_buf_size * 2; - - if ( new_size <= 0 ) - b->yy_buf_size += b->yy_buf_size / 8; - else - b->yy_buf_size *= 2; - - b->yy_ch_buf = (char *) - /* Include room in for 2 EOB chars. */ - zconfrealloc((void *) b->yy_ch_buf,b->yy_buf_size + 2 ); - } - else - /* Can't grow it, we don't own it. */ - b->yy_ch_buf = 0; - - if ( ! b->yy_ch_buf ) - YY_FATAL_ERROR( - "fatal error - scanner input buffer overflow" ); - - (yy_c_buf_p) = &b->yy_ch_buf[yy_c_buf_p_offset]; - - num_to_read = YY_CURRENT_BUFFER_LVALUE->yy_buf_size - - number_to_move - 1; - - } - - if ( num_to_read > YY_READ_BUF_SIZE ) - num_to_read = YY_READ_BUF_SIZE; - - /* Read in more data. */ - YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]), - (yy_n_chars), (size_t) num_to_read ); - - YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); - } - - if ( (yy_n_chars) == 0 ) - { - if ( number_to_move == YY_MORE_ADJ ) - { - ret_val = EOB_ACT_END_OF_FILE; - zconfrestart(zconfin ); - } - - else - { - ret_val = EOB_ACT_LAST_MATCH; - YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = - YY_BUFFER_EOF_PENDING; - } - } - - else - ret_val = EOB_ACT_CONTINUE_SCAN; - - if ((yy_size_t) ((yy_n_chars) + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) { - /* Extend the array by 50%, plus the number we really need. */ - yy_size_t new_size = (yy_n_chars) + number_to_move + ((yy_n_chars) >> 1); - YY_CURRENT_BUFFER_LVALUE->yy_ch_buf = (char *) zconfrealloc((void *) YY_CURRENT_BUFFER_LVALUE->yy_ch_buf,new_size ); - if ( ! YY_CURRENT_BUFFER_LVALUE->yy_ch_buf ) - YY_FATAL_ERROR( "out of dynamic memory in yy_get_next_buffer()" ); - } - - (yy_n_chars) += number_to_move; - YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR; - YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR; - - (yytext_ptr) = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[0]; - - return ret_val; -} - -/* yy_get_previous_state - get the state just before the EOB char was reached */ - - static yy_state_type yy_get_previous_state (void) -{ - register yy_state_type yy_current_state; - register char *yy_cp; - - yy_current_state = (yy_start); - - for ( yy_cp = (yytext_ptr) + YY_MORE_ADJ; yy_cp < (yy_c_buf_p); ++yy_cp ) - { - yy_current_state = yy_nxt[yy_current_state][(*yy_cp ? yy_ec[YY_SC_TO_UI(*yy_cp)] : 1)]; - } - - return yy_current_state; -} - -/* yy_try_NUL_trans - try to make a transition on the NUL character - * - * synopsis - * next_state = yy_try_NUL_trans( current_state ); - */ - static yy_state_type yy_try_NUL_trans (yy_state_type yy_current_state ) -{ - register int yy_is_jam; - - yy_current_state = yy_nxt[yy_current_state][1]; - yy_is_jam = (yy_current_state <= 0); - - return yy_is_jam ? 0 : yy_current_state; -} - - static void yyunput (int c, register char * yy_bp ) -{ - register char *yy_cp; - - yy_cp = (yy_c_buf_p); - - /* undo effects of setting up zconftext */ - *yy_cp = (yy_hold_char); - - if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 ) - { /* need to shift things up to make room */ - /* +2 for EOB chars. */ - register int number_to_move = (yy_n_chars) + 2; - register char *dest = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[ - YY_CURRENT_BUFFER_LVALUE->yy_buf_size + 2]; - register char *source = - &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]; - - while ( source > YY_CURRENT_BUFFER_LVALUE->yy_ch_buf ) - *--dest = *--source; - - yy_cp += (int) (dest - source); - yy_bp += (int) (dest - source); - YY_CURRENT_BUFFER_LVALUE->yy_n_chars = - (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_buf_size; - - if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 ) - YY_FATAL_ERROR( "flex scanner push-back overflow" ); - } - - *--yy_cp = (char) c; - - (yytext_ptr) = yy_bp; - (yy_hold_char) = *yy_cp; - (yy_c_buf_p) = yy_cp; -} - -#ifndef YY_NO_INPUT -#ifdef __cplusplus - static int yyinput (void) -#else - static int input (void) -#endif - -{ - int c; - - *(yy_c_buf_p) = (yy_hold_char); - - if ( *(yy_c_buf_p) == YY_END_OF_BUFFER_CHAR ) - { - /* yy_c_buf_p now points to the character we want to return. - * If this occurs *before* the EOB characters, then it's a - * valid NUL; if not, then we've hit the end of the buffer. - */ - if ( (yy_c_buf_p) < &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] ) - /* This was really a NUL. */ - *(yy_c_buf_p) = '\0'; - - else - { /* need more input */ - int offset = (yy_c_buf_p) - (yytext_ptr); - ++(yy_c_buf_p); - - switch ( yy_get_next_buffer( ) ) - { - case EOB_ACT_LAST_MATCH: - /* This happens because yy_g_n_b() - * sees that we've accumulated a - * token and flags that we need to - * try matching the token before - * proceeding. But for input(), - * there's no matching to consider. - * So convert the EOB_ACT_LAST_MATCH - * to EOB_ACT_END_OF_FILE. - */ - - /* Reset buffer status. */ - zconfrestart(zconfin ); - - /*FALLTHROUGH*/ - - case EOB_ACT_END_OF_FILE: - { - if ( zconfwrap( ) ) - return EOF; - - if ( ! (yy_did_buffer_switch_on_eof) ) - YY_NEW_FILE; -#ifdef __cplusplus - return yyinput(); -#else - return input(); -#endif - } - - case EOB_ACT_CONTINUE_SCAN: - (yy_c_buf_p) = (yytext_ptr) + offset; - break; - } - } - } - - c = *(unsigned char *) (yy_c_buf_p); /* cast for 8-bit char's */ - *(yy_c_buf_p) = '\0'; /* preserve zconftext */ - (yy_hold_char) = *++(yy_c_buf_p); - - return c; -} -#endif /* ifndef YY_NO_INPUT */ - -/** Immediately switch to a different input stream. - * @param input_file A readable stream. - * - * @note This function does not reset the start condition to @c INITIAL . - */ - void zconfrestart (FILE * input_file ) -{ - - if ( ! YY_CURRENT_BUFFER ){ - zconfensure_buffer_stack (); - YY_CURRENT_BUFFER_LVALUE = - zconf_create_buffer(zconfin,YY_BUF_SIZE ); - } - - zconf_init_buffer(YY_CURRENT_BUFFER,input_file ); - zconf_load_buffer_state( ); -} - -/** Switch to a different input buffer. - * @param new_buffer The new input buffer. - * - */ - void zconf_switch_to_buffer (YY_BUFFER_STATE new_buffer ) -{ - - /* TODO. We should be able to replace this entire function body - * with - * zconfpop_buffer_state(); - * zconfpush_buffer_state(new_buffer); - */ - zconfensure_buffer_stack (); - if ( YY_CURRENT_BUFFER == new_buffer ) - return; - - if ( YY_CURRENT_BUFFER ) - { - /* Flush out information for old buffer. */ - *(yy_c_buf_p) = (yy_hold_char); - YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p); - YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); - } - - YY_CURRENT_BUFFER_LVALUE = new_buffer; - zconf_load_buffer_state( ); - - /* We don't actually know whether we did this switch during - * EOF (zconfwrap()) processing, but the only time this flag - * is looked at is after zconfwrap() is called, so it's safe - * to go ahead and always set it. - */ - (yy_did_buffer_switch_on_eof) = 1; -} - -static void zconf_load_buffer_state (void) -{ - (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars; - (yytext_ptr) = (yy_c_buf_p) = YY_CURRENT_BUFFER_LVALUE->yy_buf_pos; - zconfin = YY_CURRENT_BUFFER_LVALUE->yy_input_file; - (yy_hold_char) = *(yy_c_buf_p); -} - -/** Allocate and initialize an input buffer state. - * @param file A readable stream. - * @param size The character buffer size in bytes. When in doubt, use @c YY_BUF_SIZE. - * - * @return the allocated buffer state. - */ - YY_BUFFER_STATE zconf_create_buffer (FILE * file, int size ) -{ - YY_BUFFER_STATE b; - - b = (YY_BUFFER_STATE) zconfalloc(sizeof( struct yy_buffer_state ) ); - if ( ! b ) - YY_FATAL_ERROR( "out of dynamic memory in zconf_create_buffer()" ); - - b->yy_buf_size = size; - - /* yy_ch_buf has to be 2 characters longer than the size given because - * we need to put in 2 end-of-buffer characters. - */ - b->yy_ch_buf = (char *) zconfalloc(b->yy_buf_size + 2 ); - if ( ! b->yy_ch_buf ) - YY_FATAL_ERROR( "out of dynamic memory in zconf_create_buffer()" ); - - b->yy_is_our_buffer = 1; - - zconf_init_buffer(b,file ); - - return b; -} - -/** Destroy the buffer. - * @param b a buffer created with zconf_create_buffer() - * - */ - void zconf_delete_buffer (YY_BUFFER_STATE b ) -{ - - if ( ! b ) - return; - - if ( b == YY_CURRENT_BUFFER ) /* Not sure if we should pop here. */ - YY_CURRENT_BUFFER_LVALUE = (YY_BUFFER_STATE) 0; - - if ( b->yy_is_our_buffer ) - zconffree((void *) b->yy_ch_buf ); - - zconffree((void *) b ); -} - -/* Initializes or reinitializes a buffer. - * This function is sometimes called more than once on the same buffer, - * such as during a zconfrestart() or at EOF. - */ - static void zconf_init_buffer (YY_BUFFER_STATE b, FILE * file ) - -{ - int oerrno = errno; - - zconf_flush_buffer(b ); - - b->yy_input_file = file; - b->yy_fill_buffer = 1; - - /* If b is the current buffer, then zconf_init_buffer was _probably_ - * called from zconfrestart() or through yy_get_next_buffer. - * In that case, we don't want to reset the lineno or column. - */ - if (b != YY_CURRENT_BUFFER){ - b->yy_bs_lineno = 1; - b->yy_bs_column = 0; - } - - b->yy_is_interactive = 0; - - errno = oerrno; -} - -/** Discard all buffered characters. On the next scan, YY_INPUT will be called. - * @param b the buffer state to be flushed, usually @c YY_CURRENT_BUFFER. - * - */ - void zconf_flush_buffer (YY_BUFFER_STATE b ) -{ - if ( ! b ) - return; - - b->yy_n_chars = 0; - - /* We always need two end-of-buffer characters. The first causes - * a transition to the end-of-buffer state. The second causes - * a jam in that state. - */ - b->yy_ch_buf[0] = YY_END_OF_BUFFER_CHAR; - b->yy_ch_buf[1] = YY_END_OF_BUFFER_CHAR; - - b->yy_buf_pos = &b->yy_ch_buf[0]; - - b->yy_at_bol = 1; - b->yy_buffer_status = YY_BUFFER_NEW; - - if ( b == YY_CURRENT_BUFFER ) - zconf_load_buffer_state( ); -} - -/** Pushes the new state onto the stack. The new state becomes - * the current state. This function will allocate the stack - * if necessary. - * @param new_buffer The new state. - * - */ -void zconfpush_buffer_state (YY_BUFFER_STATE new_buffer ) -{ - if (new_buffer == NULL) - return; - - zconfensure_buffer_stack(); - - /* This block is copied from zconf_switch_to_buffer. */ - if ( YY_CURRENT_BUFFER ) - { - /* Flush out information for old buffer. */ - *(yy_c_buf_p) = (yy_hold_char); - YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p); - YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); - } - - /* Only push if top exists. Otherwise, replace top. */ - if (YY_CURRENT_BUFFER) - (yy_buffer_stack_top)++; - YY_CURRENT_BUFFER_LVALUE = new_buffer; - - /* copied from zconf_switch_to_buffer. */ - zconf_load_buffer_state( ); - (yy_did_buffer_switch_on_eof) = 1; -} - -/** Removes and deletes the top of the stack, if present. - * The next element becomes the new top. - * - */ -void zconfpop_buffer_state (void) -{ - if (!YY_CURRENT_BUFFER) - return; - - zconf_delete_buffer(YY_CURRENT_BUFFER ); - YY_CURRENT_BUFFER_LVALUE = NULL; - if ((yy_buffer_stack_top) > 0) - --(yy_buffer_stack_top); - - if (YY_CURRENT_BUFFER) { - zconf_load_buffer_state( ); - (yy_did_buffer_switch_on_eof) = 1; - } -} - -/* Allocates the stack if it does not exist. - * Guarantees space for at least one push. - */ -static void zconfensure_buffer_stack (void) -{ - int num_to_alloc; - - if (!(yy_buffer_stack)) { - - /* First allocation is just for 2 elements, since we don't know if this - * scanner will even need a stack. We use 2 instead of 1 to avoid an - * immediate realloc on the next call. - */ - num_to_alloc = 1; - (yy_buffer_stack) = (struct yy_buffer_state**)zconfalloc - (num_to_alloc * sizeof(struct yy_buffer_state*) - ); - if ( ! (yy_buffer_stack) ) - YY_FATAL_ERROR( "out of dynamic memory in zconfensure_buffer_stack()" ); - - memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*)); - - (yy_buffer_stack_max) = num_to_alloc; - (yy_buffer_stack_top) = 0; - return; - } - - if ((yy_buffer_stack_top) >= ((yy_buffer_stack_max)) - 1){ - - /* Increase the buffer to prepare for a possible push. */ - int grow_size = 8 /* arbitrary grow size */; - - num_to_alloc = (yy_buffer_stack_max) + grow_size; - (yy_buffer_stack) = (struct yy_buffer_state**)zconfrealloc - ((yy_buffer_stack), - num_to_alloc * sizeof(struct yy_buffer_state*) - ); - if ( ! (yy_buffer_stack) ) - YY_FATAL_ERROR( "out of dynamic memory in zconfensure_buffer_stack()" ); - - /* zero only the new slots.*/ - memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*)); - (yy_buffer_stack_max) = num_to_alloc; - } -} - -/** Setup the input buffer state to scan directly from a user-specified character buffer. - * @param base the character buffer - * @param size the size in bytes of the character buffer - * - * @return the newly allocated buffer state object. - */ -YY_BUFFER_STATE zconf_scan_buffer (char * base, yy_size_t size ) -{ - YY_BUFFER_STATE b; - - if ( size < 2 || - base[size-2] != YY_END_OF_BUFFER_CHAR || - base[size-1] != YY_END_OF_BUFFER_CHAR ) - /* They forgot to leave room for the EOB's. */ - return 0; - - b = (YY_BUFFER_STATE) zconfalloc(sizeof( struct yy_buffer_state ) ); - if ( ! b ) - YY_FATAL_ERROR( "out of dynamic memory in zconf_scan_buffer()" ); - - b->yy_buf_size = size - 2; /* "- 2" to take care of EOB's */ - b->yy_buf_pos = b->yy_ch_buf = base; - b->yy_is_our_buffer = 0; - b->yy_input_file = 0; - b->yy_n_chars = b->yy_buf_size; - b->yy_is_interactive = 0; - b->yy_at_bol = 1; - b->yy_fill_buffer = 0; - b->yy_buffer_status = YY_BUFFER_NEW; - - zconf_switch_to_buffer(b ); - - return b; -} - -/** Setup the input buffer state to scan a string. The next call to zconflex() will - * scan from a @e copy of @a str. - * @param yystr a NUL-terminated string to scan - * - * @return the newly allocated buffer state object. - * @note If you want to scan bytes that may contain NUL values, then use - * zconf_scan_bytes() instead. - */ -YY_BUFFER_STATE zconf_scan_string (yyconst char * yystr ) -{ - - return zconf_scan_bytes(yystr,strlen(yystr) ); -} - -/** Setup the input buffer state to scan the given bytes. The next call to zconflex() will - * scan from a @e copy of @a bytes. - * @param yybytes the byte buffer to scan - * @param _yybytes_len the number of bytes in the buffer pointed to by @a bytes. - * - * @return the newly allocated buffer state object. - */ -YY_BUFFER_STATE zconf_scan_bytes (yyconst char * yybytes, int _yybytes_len ) -{ - YY_BUFFER_STATE b; - char *buf; - yy_size_t n; - int i; - - /* Get memory for full buffer, including space for trailing EOB's. */ - n = _yybytes_len + 2; - buf = (char *) zconfalloc(n ); - if ( ! buf ) - YY_FATAL_ERROR( "out of dynamic memory in zconf_scan_bytes()" ); - - for ( i = 0; i < _yybytes_len; ++i ) - buf[i] = yybytes[i]; - - buf[_yybytes_len] = buf[_yybytes_len+1] = YY_END_OF_BUFFER_CHAR; - - b = zconf_scan_buffer(buf,n ); - if ( ! b ) - YY_FATAL_ERROR( "bad buffer in zconf_scan_bytes()" ); - - /* It's okay to grow etc. this buffer, and we should throw it - * away when we're done. - */ - b->yy_is_our_buffer = 1; - - return b; -} - -#ifndef YY_EXIT_FAILURE -#define YY_EXIT_FAILURE 2 -#endif - -static void yy_fatal_error (yyconst char* msg ) -{ - (void) fprintf( stderr, "%s\n", msg ); - exit( YY_EXIT_FAILURE ); -} - -/* Redefine yyless() so it works in section 3 code. */ - -#undef yyless -#define yyless(n) \ - do \ - { \ - /* Undo effects of setting up zconftext. */ \ - int yyless_macro_arg = (n); \ - YY_LESS_LINENO(yyless_macro_arg);\ - zconftext[zconfleng] = (yy_hold_char); \ - (yy_c_buf_p) = zconftext + yyless_macro_arg; \ - (yy_hold_char) = *(yy_c_buf_p); \ - *(yy_c_buf_p) = '\0'; \ - zconfleng = yyless_macro_arg; \ - } \ - while ( 0 ) - -/* Accessor methods (get/set functions) to struct members. */ - -/** Get the current line number. - * - */ -int zconfget_lineno (void) -{ - - return zconflineno; -} - -/** Get the input stream. - * - */ -FILE *zconfget_in (void) -{ - return zconfin; -} - -/** Get the output stream. - * - */ -FILE *zconfget_out (void) -{ - return zconfout; -} - -/** Get the length of the current token. - * - */ -int zconfget_leng (void) -{ - return zconfleng; -} - -/** Get the current token. - * - */ - -char *zconfget_text (void) -{ - return zconftext; -} - -/** Set the current line number. - * @param line_number - * - */ -void zconfset_lineno (int line_number ) -{ - - zconflineno = line_number; -} - -/** Set the input stream. This does not discard the current - * input buffer. - * @param in_str A readable stream. - * - * @see zconf_switch_to_buffer - */ -void zconfset_in (FILE * in_str ) -{ - zconfin = in_str ; -} - -void zconfset_out (FILE * out_str ) -{ - zconfout = out_str ; -} - -int zconfget_debug (void) -{ - return zconf_flex_debug; -} - -void zconfset_debug (int bdebug ) -{ - zconf_flex_debug = bdebug ; -} - -static int yy_init_globals (void) -{ - /* Initialization is the same as for the non-reentrant scanner. - * This function is called from zconflex_destroy(), so don't allocate here. - */ - - (yy_buffer_stack) = 0; - (yy_buffer_stack_top) = 0; - (yy_buffer_stack_max) = 0; - (yy_c_buf_p) = (char *) 0; - (yy_init) = 0; - (yy_start) = 0; - -/* Defined in main.c */ -#ifdef YY_STDINIT - zconfin = stdin; - zconfout = stdout; -#else - zconfin = (FILE *) 0; - zconfout = (FILE *) 0; -#endif - - /* For future reference: Set errno on error, since we are called by - * zconflex_init() - */ - return 0; -} - -/* zconflex_destroy is for both reentrant and non-reentrant scanners. */ -int zconflex_destroy (void) -{ - - /* Pop the buffer stack, destroying each element. */ - while(YY_CURRENT_BUFFER){ - zconf_delete_buffer(YY_CURRENT_BUFFER ); - YY_CURRENT_BUFFER_LVALUE = NULL; - zconfpop_buffer_state(); - } - - /* Destroy the stack itself. */ - zconffree((yy_buffer_stack) ); - (yy_buffer_stack) = NULL; - - /* Reset the globals. This is important in a non-reentrant scanner so the next time - * zconflex() is called, initialization will occur. */ - yy_init_globals( ); - - return 0; -} - -/* - * Internal utility routines. - */ - -#ifndef yytext_ptr -static void yy_flex_strncpy (char* s1, yyconst char * s2, int n ) -{ - register int i; - for ( i = 0; i < n; ++i ) - s1[i] = s2[i]; -} -#endif - -#ifdef YY_NEED_STRLEN -static int yy_flex_strlen (yyconst char * s ) -{ - register int n; - for ( n = 0; s[n]; ++n ) - ; - - return n; -} -#endif - -void *zconfalloc (yy_size_t size ) -{ - return (void *) malloc( size ); -} - -void *zconfrealloc (void * ptr, yy_size_t size ) -{ - /* The cast to (char *) in the following accommodates both - * implementations that use char* generic pointers, and those - * that use void* generic pointers. It works with the latter - * because both ANSI C and C++ allow castless assignment from - * any pointer type to void*, and deal with argument conversions - * as though doing an assignment. - */ - return (void *) realloc( (char *) ptr, size ); -} - -void zconffree (void * ptr ) -{ - free( (char *) ptr ); /* see zconfrealloc() for (char *) cast */ -} - -#define YYTABLES_NAME "yytables" - -void zconf_starthelp(void) -{ - new_string(); - last_ts = first_ts = 0; - BEGIN(HELP); -} - -static void zconf_endhelp(void) -{ - zconflval.string = text; - BEGIN(INITIAL); -} - -/* - * Try to open specified file with following names: - * ./name - * $(srctree)/name - * The latter is used when srctree is separate from objtree - * when compiling the kernel. - * Return NULL if file is not found. - */ -FILE *zconf_fopen(const char *name) -{ - char *env, fullname[PATH_MAX+1]; - FILE *f; - - f = fopen(name, "r"); - if (!f && name != NULL && name[0] != '/') { - env = getenv(SRCTREE); - if (env) { - sprintf(fullname, "%s/%s", env, name); - f = fopen(fullname, "r"); - } - } - return f; -} - -void zconf_initscan(const char *name) -{ - zconfin = zconf_fopen(name); - if (!zconfin) { - printf("can't find file %s\n", name); - exit(1); - } - - current_buf = malloc(sizeof(*current_buf)); - memset(current_buf, 0, sizeof(*current_buf)); - - current_file = file_lookup(name); - current_file->lineno = 1; - current_file->flags = FILE_BUSY; -} - -void zconf_nextfile(const char *name) -{ - struct file *file = file_lookup(name); - struct buffer *buf = malloc(sizeof(*buf)); - memset(buf, 0, sizeof(*buf)); - - current_buf->state = YY_CURRENT_BUFFER; - zconfin = zconf_fopen(file->name); - if (!zconfin) { - printf("%s:%d: can't open file \"%s\"\n", - zconf_curname(), zconf_lineno(), file->name); - exit(1); - } - zconf_switch_to_buffer(zconf_create_buffer(zconfin,YY_BUF_SIZE)); - buf->parent = current_buf; - current_buf = buf; - - if (file->flags & FILE_BUSY) { - printf("%s:%d: do not source '%s' from itself\n", - zconf_curname(), zconf_lineno(), name); - exit(1); - } - if (file->flags & FILE_SCANNED) { - printf("%s:%d: file '%s' is already sourced from '%s'\n", - zconf_curname(), zconf_lineno(), name, - file->parent->name); - exit(1); - } - file->flags |= FILE_BUSY; - file->lineno = 1; - file->parent = current_file; - current_file = file; -} - -static void zconf_endfile(void) -{ - struct buffer *parent; - - current_file->flags |= FILE_SCANNED; - current_file->flags &= ~FILE_BUSY; - current_file = current_file->parent; - - parent = current_buf->parent; - if (parent) { - fclose(zconfin); - zconf_delete_buffer(YY_CURRENT_BUFFER); - zconf_switch_to_buffer(parent->state); - } - free(current_buf); - current_buf = parent; -} - -int zconf_lineno(void) -{ - return current_pos.lineno; -} - -const char *zconf_curname(void) -{ - return current_pos.file ? current_pos.file->name : "<none>"; -} - diff --git a/payloads/external/SeaBIOS/scripts/kconfig/list.h b/payloads/external/SeaBIOS/scripts/kconfig/list.h deleted file mode 100644 index 685d80e1..00000000 --- a/payloads/external/SeaBIOS/scripts/kconfig/list.h +++ /dev/null @@ -1,131 +0,0 @@ -#ifndef LIST_H -#define LIST_H - -/* - * Copied from include/linux/... - */ - -#undef offsetof -#define offsetof(TYPE, MEMBER) ((size_t) &((TYPE *)0)->MEMBER) - -/** - * container_of - cast a member of a structure out to the containing structure - * @ptr: the pointer to the member. - * @type: the type of the container struct this is embedded in. - * @member: the name of the member within the struct. - * - */ -#define container_of(ptr, type, member) ({ \ - const typeof( ((type *)0)->member ) *__mptr = (ptr); \ - (type *)( (char *)__mptr - offsetof(type,member) );}) - - -struct list_head { - struct list_head *next, *prev; -}; - - -#define LIST_HEAD_INIT(name) { &(name), &(name) } - -#define LIST_HEAD(name) \ - struct list_head name = LIST_HEAD_INIT(name) - -/** - * list_entry - get the struct for this entry - * @ptr: the &struct list_head pointer. - * @type: the type of the struct this is embedded in. - * @member: the name of the list_struct within the struct. - */ -#define list_entry(ptr, type, member) \ - container_of(ptr, type, member) - -/** - * list_for_each_entry - iterate over list of given type - * @pos: the type * to use as a loop cursor. - * @head: the head for your list. - * @member: the name of the list_struct within the struct. - */ -#define list_for_each_entry(pos, head, member) \ - for (pos = list_entry((head)->next, typeof(*pos), member); \ - &pos->member != (head); \ - pos = list_entry(pos->member.next, typeof(*pos), member)) - -/** - * list_for_each_entry_safe - iterate over list of given type safe against removal of list entry - * @pos: the type * to use as a loop cursor. - * @n: another type * to use as temporary storage - * @head: the head for your list. - * @member: the name of the list_struct within the struct. - */ -#define list_for_each_entry_safe(pos, n, head, member) \ - for (pos = list_entry((head)->next, typeof(*pos), member), \ - n = list_entry(pos->member.next, typeof(*pos), member); \ - &pos->member != (head); \ - pos = n, n = list_entry(n->member.next, typeof(*n), member)) - -/** - * list_empty - tests whether a list is empty - * @head: the list to test. - */ -static inline int list_empty(const struct list_head *head) -{ - return head->next == head; -} - -/* - * Insert a new entry between two known consecutive entries. - * - * This is only for internal list manipulation where we know - * the prev/next entries already! - */ -static inline void __list_add(struct list_head *_new, - struct list_head *prev, - struct list_head *next) -{ - next->prev = _new; - _new->next = next; - _new->prev = prev; - prev->next = _new; -} - -/** - * list_add_tail - add a new entry - * @new: new entry to be added - * @head: list head to add it before - * - * Insert a new entry before the specified head. - * This is useful for implementing queues. - */ -static inline void list_add_tail(struct list_head *_new, struct list_head *head) -{ - __list_add(_new, head->prev, head); -} - -/* - * Delete a list entry by making the prev/next entries - * point to each other. - * - * This is only for internal list manipulation where we know - * the prev/next entries already! - */ -static inline void __list_del(struct list_head *prev, struct list_head *next) -{ - next->prev = prev; - prev->next = next; -} - -#define LIST_POISON1 ((void *) 0x00100100) -#define LIST_POISON2 ((void *) 0x00200200) -/** - * list_del - deletes entry from list. - * @entry: the element to delete from the list. - * Note: list_empty() on entry does not return true after this, the entry is - * in an undefined state. - */ -static inline void list_del(struct list_head *entry) -{ - __list_del(entry->prev, entry->next); - entry->next = (struct list_head*)LIST_POISON1; - entry->prev = (struct list_head*)LIST_POISON2; -} -#endif diff --git a/payloads/external/SeaBIOS/scripts/kconfig/lkc.h b/payloads/external/SeaBIOS/scripts/kconfig/lkc.h deleted file mode 100644 index d5daa7af..00000000 --- a/payloads/external/SeaBIOS/scripts/kconfig/lkc.h +++ /dev/null @@ -1,200 +0,0 @@ -/* - * Copyright (C) 2002 Roman Zippel <zippel@linux-m68k.org> - * Released under the terms of the GNU GPL v2.0. - */ - -#ifndef LKC_H -#define LKC_H - -#include "expr.h" - -#ifndef KBUILD_NO_NLS -# include <libintl.h> -#else -static inline const char *gettext(const char *txt) { return txt; } -static inline void textdomain(const char *domainname) {} -static inline void bindtextdomain(const char *name, const char *dir) {} -static inline char *bind_textdomain_codeset(const char *dn, char *c) { return c; } -#endif - -#ifdef __cplusplus -extern "C" { -#endif - -#define P(name,type,arg) extern type name arg -#include "lkc_proto.h" -#undef P - -#define SRCTREE "srctree" - -#ifndef PACKAGE -#define PACKAGE "linux" -#endif - -#define LOCALEDIR "/usr/share/locale" - -#define _(text) gettext(text) -#define N_(text) (text) - -#ifndef CONFIG_ -#define CONFIG_ "CONFIG_" -#endif -static inline const char *CONFIG_prefix(void) -{ - return getenv( "CONFIG_" ) ?: CONFIG_; -} -#undef CONFIG_ -#define CONFIG_ CONFIG_prefix() - -#define TF_COMMAND 0x0001 -#define TF_PARAM 0x0002 -#define TF_OPTION 0x0004 - -enum conf_def_mode { - def_default, - def_yes, - def_mod, - def_no, - def_random -}; - -#define T_OPT_MODULES 1 -#define T_OPT_DEFCONFIG_LIST 2 -#define T_OPT_ENV 3 -#define T_OPT_ALLNOCONFIG_Y 4 - -struct kconf_id { - int name; - int token; - unsigned int flags; - enum symbol_type stype; -}; - -extern int zconfdebug; - -int zconfparse(void); -void zconfdump(FILE *out); -void zconf_starthelp(void); -FILE *zconf_fopen(const char *name); -void zconf_initscan(const char *name); -void zconf_nextfile(const char *name); -int zconf_lineno(void); -const char *zconf_curname(void); - -/* confdata.c */ -const char *conf_get_configname(void); -const char *conf_get_autoconfig_name(void); -char *conf_get_default_confname(void); -void sym_set_change_count(int count); -void sym_add_change_count(int count); -bool conf_set_all_new_symbols(enum conf_def_mode mode); -void set_all_choice_values(struct symbol *csym); - -struct conf_printer { - void (*print_symbol)(FILE *, struct symbol *, const char *, void *); - void (*print_comment)(FILE *, const char *, void *); -}; - -/* confdata.c and expr.c */ -static inline void xfwrite(const void *str, size_t len, size_t count, FILE *out) -{ - assert(len != 0); - - if (fwrite(str, len, count, out) != count) - fprintf(stderr, "Error in writing or end of file.\n"); -} - -/* menu.c */ -void _menu_init(void); -void menu_warn(struct menu *menu, const char *fmt, ...); -struct menu *menu_add_menu(void); -void menu_end_menu(void); -void menu_add_entry(struct symbol *sym); -void menu_end_entry(void); -void menu_add_dep(struct expr *dep); -void menu_add_visibility(struct expr *dep); -struct property *menu_add_prop(enum prop_type type, char *prompt, struct expr *expr, struct expr *dep); -struct property *menu_add_prompt(enum prop_type type, char *prompt, struct expr *dep); -void menu_add_expr(enum prop_type type, struct expr *expr, struct expr *dep); -void menu_add_symbol(enum prop_type type, struct symbol *sym, struct expr *dep); -void menu_add_option(int token, char *arg); -void menu_finalize(struct menu *parent); -void menu_set_type(int type); - -/* util.c */ -struct file *file_lookup(const char *name); -int file_write_dep(const char *name); -void *xmalloc(size_t size); -void *xcalloc(size_t nmemb, size_t size); - -struct gstr { - size_t len; - char *s; - /* - * when max_width is not zero long lines in string s (if any) get - * wrapped not to exceed the max_width value - */ - int max_width; -}; -struct gstr str_new(void); -struct gstr str_assign(const char *s); -void str_free(struct gstr *gs); -void str_append(struct gstr *gs, const char *s); -void str_printf(struct gstr *gs, const char *fmt, ...); -const char *str_get(struct gstr *gs); - -/* symbol.c */ -extern struct expr *sym_env_list; - -void sym_init(void); -void sym_clear_all_valid(void); -void sym_set_all_changed(void); -void sym_set_changed(struct symbol *sym); -struct symbol *sym_choice_default(struct symbol *sym); -const char *sym_get_string_default(struct symbol *sym); -struct symbol *sym_check_deps(struct symbol *sym); -struct property *prop_alloc(enum prop_type type, struct symbol *sym); -struct symbol *prop_get_symbol(struct property *prop); -struct property *sym_get_env_prop(struct symbol *sym); - -static inline tristate sym_get_tristate_value(struct symbol *sym) -{ - return sym->curr.tri; -} - - -static inline struct symbol *sym_get_choice_value(struct symbol *sym) -{ - return (struct symbol *)sym->curr.val; -} - -static inline bool sym_set_choice_value(struct symbol *ch, struct symbol *chval) -{ - return sym_set_tristate_value(chval, yes); -} - -static inline bool sym_is_choice(struct symbol *sym) -{ - return sym->flags & SYMBOL_CHOICE ? true : false; -} - -static inline bool sym_is_choice_value(struct symbol *sym) -{ - return sym->flags & SYMBOL_CHOICEVAL ? true : false; -} - -static inline bool sym_is_optional(struct symbol *sym) -{ - return sym->flags & SYMBOL_OPTIONAL ? true : false; -} - -static inline bool sym_has_value(struct symbol *sym) -{ - return sym->flags & SYMBOL_DEF_USER ? true : false; -} - -#ifdef __cplusplus -} -#endif - -#endif /* LKC_H */ diff --git a/payloads/external/SeaBIOS/scripts/kconfig/lkc_proto.h b/payloads/external/SeaBIOS/scripts/kconfig/lkc_proto.h deleted file mode 100644 index ecdb9659..00000000 --- a/payloads/external/SeaBIOS/scripts/kconfig/lkc_proto.h +++ /dev/null @@ -1,57 +0,0 @@ -#include <stdarg.h> - -/* confdata.c */ -P(conf_parse,void,(const char *name)); -P(conf_read,int,(const char *name)); -P(conf_read_simple,int,(const char *name, int)); -P(conf_write_defconfig,int,(const char *name)); -P(conf_write,int,(const char *name)); -P(conf_write_autoconf,int,(void)); -P(conf_get_changed,bool,(void)); -P(conf_set_changed_callback, void,(void (*fn)(void))); -P(conf_set_message_callback, void,(void (*fn)(const char *fmt, va_list ap))); - -/* menu.c */ -P(rootmenu,struct menu,); - -P(menu_is_empty, bool, (struct menu *menu)); -P(menu_is_visible, bool, (struct menu *menu)); -P(menu_has_prompt, bool, (struct menu *menu)); -P(menu_get_prompt,const char *,(struct menu *menu)); -P(menu_get_root_menu,struct menu *,(struct menu *menu)); -P(menu_get_parent_menu,struct menu *,(struct menu *menu)); -P(menu_has_help,bool,(struct menu *menu)); -P(menu_get_help,const char *,(struct menu *menu)); -P(get_symbol_str, void, (struct gstr *r, struct symbol *sym, struct list_head - *head)); -P(get_relations_str, struct gstr, (struct symbol **sym_arr, struct list_head - *head)); -P(menu_get_ext_help,void,(struct menu *menu, struct gstr *help)); - -/* symbol.c */ -P(symbol_hash,struct symbol *,[SYMBOL_HASHSIZE]); - -P(sym_lookup,struct symbol *,(const char *name, int flags)); -P(sym_find,struct symbol *,(const char *name)); -P(sym_expand_string_value,const char *,(const char *in)); -P(sym_escape_string_value, const char *,(const char *in)); -P(sym_re_search,struct symbol **,(const char *pattern)); -P(sym_type_name,const char *,(enum symbol_type type)); -P(sym_calc_value,void,(struct symbol *sym)); -P(sym_get_type,enum symbol_type,(struct symbol *sym)); -P(sym_tristate_within_range,bool,(struct symbol *sym,tristate tri)); -P(sym_set_tristate_value,bool,(struct symbol *sym,tristate tri)); -P(sym_toggle_tristate_value,tristate,(struct symbol *sym)); -P(sym_string_valid,bool,(struct symbol *sym, const char *newval)); -P(sym_string_within_range,bool,(struct symbol *sym, const char *str)); -P(sym_set_string_value,bool,(struct symbol *sym, const char *newval)); -P(sym_is_changable,bool,(struct symbol *sym)); -P(sym_get_choice_prop,struct property *,(struct symbol *sym)); -P(sym_get_default_prop,struct property *,(struct symbol *sym)); -P(sym_get_string_value,const char *,(struct symbol *sym)); - -P(prop_get_type_name,const char *,(enum prop_type type)); - -/* expr.c */ -P(expr_compare_type,int,(enum expr_type t1, enum expr_type t2)); -P(expr_print,void,(struct expr *e, void (*fn)(void *, struct symbol *, const char *), void *data, int prevtoken)); diff --git a/payloads/external/SeaBIOS/scripts/kconfig/lxdialog/.gitignore b/payloads/external/SeaBIOS/scripts/kconfig/lxdialog/.gitignore deleted file mode 100644 index 90b08ff0..00000000 --- a/payloads/external/SeaBIOS/scripts/kconfig/lxdialog/.gitignore +++ /dev/null @@ -1,4 +0,0 @@ -# -# Generated files -# -lxdialog diff --git a/payloads/external/SeaBIOS/scripts/kconfig/lxdialog/BIG.FAT.WARNING b/payloads/external/SeaBIOS/scripts/kconfig/lxdialog/BIG.FAT.WARNING deleted file mode 100644 index a8999d82..00000000 --- a/payloads/external/SeaBIOS/scripts/kconfig/lxdialog/BIG.FAT.WARNING +++ /dev/null @@ -1,4 +0,0 @@ -This is NOT the official version of dialog. This version has been -significantly modified from the original. It is for use by the Linux -kernel configuration script. Please do not bother Savio Lam with -questions about this program. diff --git a/payloads/external/SeaBIOS/scripts/kconfig/lxdialog/check-lxdialog.sh b/payloads/external/SeaBIOS/scripts/kconfig/lxdialog/check-lxdialog.sh deleted file mode 100644 index 9d2a4c58..00000000 --- a/payloads/external/SeaBIOS/scripts/kconfig/lxdialog/check-lxdialog.sh +++ /dev/null @@ -1,87 +0,0 @@ -#!/bin/sh -# Check ncurses compatibility - -# What library to link -ldflags() -{ - pkg-config --libs ncursesw 2>/dev/null && exit - pkg-config --libs ncurses 2>/dev/null && exit - for ext in so a dll.a dylib ; do - for lib in ncursesw ncurses curses ; do - $cc -print-file-name=lib${lib}.${ext} | grep -q / - if [ $? -eq 0 ]; then - echo "-l${lib}" - exit - fi - done - done - exit 1 -} - -# Where is ncurses.h? -ccflags() -{ - if [ -f /usr/include/ncursesw/curses.h ]; then - echo '-I/usr/include/ncursesw -DCURSES_LOC="<curses.h>"' - echo ' -DNCURSES_WIDECHAR=1' - elif [ -f /usr/include/ncurses/ncurses.h ]; then - echo '-I/usr/include/ncurses -DCURSES_LOC="<ncurses.h>"' - elif [ -f /usr/include/ncurses/curses.h ]; then - echo '-I/usr/include/ncurses -DCURSES_LOC="<curses.h>"' - elif [ -f /usr/include/ncurses.h ]; then - echo '-DCURSES_LOC="<ncurses.h>"' - else - echo '-DCURSES_LOC="<curses.h>"' - fi -} - -# Temp file, try to clean up after us -tmp=.lxdialog.tmp -trap "rm -f $tmp" 0 1 2 3 15 - -# Check if we can link to ncurses -check() { - $cc -x c - -o $tmp 2>/dev/null <<'EOF' -#include CURSES_LOC -main() {} -EOF - if [ $? != 0 ]; then - echo " *** Unable to find the ncurses libraries or the" 1>&2 - echo " *** required header files." 1>&2 - echo " *** 'make menuconfig' requires the ncurses libraries." 1>&2 - echo " *** " 1>&2 - echo " *** Install ncurses (ncurses-devel) and try again." 1>&2 - echo " *** " 1>&2 - exit 1 - fi -} - -usage() { - printf "Usage: $0 [-check compiler options|-ccflags|-ldflags compiler options]\n" -} - -if [ $# -eq 0 ]; then - usage - exit 1 -fi - -cc="" -case "$1" in - "-check") - shift - cc="$@" - check - ;; - "-ccflags") - ccflags - ;; - "-ldflags") - shift - cc="$@" - ldflags - ;; - "*") - usage - exit 1 - ;; -esac diff --git a/payloads/external/SeaBIOS/scripts/kconfig/lxdialog/checklist.c b/payloads/external/SeaBIOS/scripts/kconfig/lxdialog/checklist.c deleted file mode 100644 index 8d016faa..00000000 --- a/payloads/external/SeaBIOS/scripts/kconfig/lxdialog/checklist.c +++ /dev/null @@ -1,332 +0,0 @@ -/* - * checklist.c -- implements the checklist box - * - * ORIGINAL AUTHOR: Savio Lam (lam836@cs.cuhk.hk) - * Stuart Herbert - S.Herbert@sheffield.ac.uk: radiolist extension - * Alessandro Rubini - rubini@ipvvis.unipv.it: merged the two - * MODIFIED FOR LINUX KERNEL CONFIG BY: William Roadcap (roadcap@cfw.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include "dialog.h" - -static int list_width, check_x, item_x; - -/* - * Print list item - */ -static void print_item(WINDOW * win, int choice, int selected) -{ - int i; - char *list_item = malloc(list_width + 1); - - strncpy(list_item, item_str(), list_width - item_x); - list_item[list_width - item_x] = '\0'; - - /* Clear 'residue' of last item */ - wattrset(win, dlg.menubox.atr); - wmove(win, choice, 0); - for (i = 0; i < list_width; i++) - waddch(win, ' '); - - wmove(win, choice, check_x); - wattrset(win, selected ? dlg.check_selected.atr - : dlg.check.atr); - if (!item_is_tag(':')) - wprintw(win, "(%c)", item_is_tag('X') ? 'X' : ' '); - - wattrset(win, selected ? dlg.tag_selected.atr : dlg.tag.atr); - mvwaddch(win, choice, item_x, list_item[0]); - wattrset(win, selected ? dlg.item_selected.atr : dlg.item.atr); - waddstr(win, list_item + 1); - if (selected) { - wmove(win, choice, check_x + 1); - wrefresh(win); - } - free(list_item); -} - -/* - * Print the scroll indicators. - */ -static void print_arrows(WINDOW * win, int choice, int item_no, int scroll, - int y, int x, int height) -{ - wmove(win, y, x); - - if (scroll > 0) { - wattrset(win, dlg.uarrow.atr); - waddch(win, ACS_UARROW); - waddstr(win, "(-)"); - } else { - wattrset(win, dlg.menubox.atr); - waddch(win, ACS_HLINE); - waddch(win, ACS_HLINE); - waddch(win, ACS_HLINE); - waddch(win, ACS_HLINE); - } - - y = y + height + 1; - wmove(win, y, x); - - if ((height < item_no) && (scroll + choice < item_no - 1)) { - wattrset(win, dlg.darrow.atr); - waddch(win, ACS_DARROW); - waddstr(win, "(+)"); - } else { - wattrset(win, dlg.menubox_border.atr); - waddch(win, ACS_HLINE); - waddch(win, ACS_HLINE); - waddch(win, ACS_HLINE); - waddch(win, ACS_HLINE); - } -} - -/* - * Display the termination buttons - */ -static void print_buttons(WINDOW * dialog, int height, int width, int selected) -{ - int x = width / 2 - 11; - int y = height - 2; - - print_button(dialog, gettext("Select"), y, x, selected == 0); - print_button(dialog, gettext(" Help "), y, x + 14, selected == 1); - - wmove(dialog, y, x + 1 + 14 * selected); - wrefresh(dialog); -} - -/* - * Display a dialog box with a list of options that can be turned on or off - * in the style of radiolist (only one option turned on at a time). - */ -int dialog_checklist(const char *title, const char *prompt, int height, - int width, int list_height) -{ - int i, x, y, box_x, box_y; - int key = 0, button = 0, choice = 0, scroll = 0, max_choice; - WINDOW *dialog, *list; - - /* which item to highlight */ - item_foreach() { - if (item_is_tag('X')) - choice = item_n(); - if (item_is_selected()) { - choice = item_n(); - break; - } - } - -do_resize: - if (getmaxy(stdscr) < (height + CHECKLIST_HEIGTH_MIN)) - return -ERRDISPLAYTOOSMALL; - if (getmaxx(stdscr) < (width + CHECKLIST_WIDTH_MIN)) - return -ERRDISPLAYTOOSMALL; - - max_choice = MIN(list_height, item_count()); - - /* center dialog box on screen */ - x = (getmaxx(stdscr) - width) / 2; - y = (getmaxy(stdscr) - height) / 2; - - draw_shadow(stdscr, y, x, height, width); - - dialog = newwin(height, width, y, x); - keypad(dialog, TRUE); - - draw_box(dialog, 0, 0, height, width, - dlg.dialog.atr, dlg.border.atr); - wattrset(dialog, dlg.border.atr); - mvwaddch(dialog, height - 3, 0, ACS_LTEE); - for (i = 0; i < width - 2; i++) - waddch(dialog, ACS_HLINE); - wattrset(dialog, dlg.dialog.atr); - waddch(dialog, ACS_RTEE); - - print_title(dialog, title, width); - - wattrset(dialog, dlg.dialog.atr); - print_autowrap(dialog, prompt, width - 2, 1, 3); - - list_width = width - 6; - box_y = height - list_height - 5; - box_x = (width - list_width) / 2 - 1; - - /* create new window for the list */ - list = subwin(dialog, list_height, list_width, y + box_y + 1, - x + box_x + 1); - - keypad(list, TRUE); - - /* draw a box around the list items */ - draw_box(dialog, box_y, box_x, list_height + 2, list_width + 2, - dlg.menubox_border.atr, dlg.menubox.atr); - - /* Find length of longest item in order to center checklist */ - check_x = 0; - item_foreach() - check_x = MAX(check_x, strlen(item_str()) + 4); - check_x = MIN(check_x, list_width); - - check_x = (list_width - check_x) / 2; - item_x = check_x + 4; - - if (choice >= list_height) { - scroll = choice - list_height + 1; - choice -= scroll; - } - - /* Print the list */ - for (i = 0; i < max_choice; i++) { - item_set(scroll + i); - print_item(list, i, i == choice); - } - - print_arrows(dialog, choice, item_count(), scroll, - box_y, box_x + check_x + 5, list_height); - - print_buttons(dialog, height, width, 0); - - wnoutrefresh(dialog); - wnoutrefresh(list); - doupdate(); - - while (key != KEY_ESC) { - key = wgetch(dialog); - - for (i = 0; i < max_choice; i++) { - item_set(i + scroll); - if (toupper(key) == toupper(item_str()[0])) - break; - } - - if (i < max_choice || key == KEY_UP || key == KEY_DOWN || - key == '+' || key == '-') { - if (key == KEY_UP || key == '-') { - if (!choice) { - if (!scroll) - continue; - /* Scroll list down */ - if (list_height > 1) { - /* De-highlight current first item */ - item_set(scroll); - print_item(list, 0, FALSE); - scrollok(list, TRUE); - wscrl(list, -1); - scrollok(list, FALSE); - } - scroll--; - item_set(scroll); - print_item(list, 0, TRUE); - print_arrows(dialog, choice, item_count(), - scroll, box_y, box_x + check_x + 5, list_height); - - wnoutrefresh(dialog); - wrefresh(list); - - continue; /* wait for another key press */ - } else - i = choice - 1; - } else if (key == KEY_DOWN || key == '+') { - if (choice == max_choice - 1) { - if (scroll + choice >= item_count() - 1) - continue; - /* Scroll list up */ - if (list_height > 1) { - /* De-highlight current last item before scrolling up */ - item_set(scroll + max_choice - 1); - print_item(list, - max_choice - 1, - FALSE); - scrollok(list, TRUE); - wscrl(list, 1); - scrollok(list, FALSE); - } - scroll++; - item_set(scroll + max_choice - 1); - print_item(list, max_choice - 1, TRUE); - - print_arrows(dialog, choice, item_count(), - scroll, box_y, box_x + check_x + 5, list_height); - - wnoutrefresh(dialog); - wrefresh(list); - - continue; /* wait for another key press */ - } else - i = choice + 1; - } - if (i != choice) { - /* De-highlight current item */ - item_set(scroll + choice); - print_item(list, choice, FALSE); - /* Highlight new item */ - choice = i; - item_set(scroll + choice); - print_item(list, choice, TRUE); - wnoutrefresh(dialog); - wrefresh(list); - } - continue; /* wait for another key press */ - } - switch (key) { - case 'H': - case 'h': - case '?': - button = 1; - /* fall-through */ - case 'S': - case 's': - case ' ': - case '\n': - item_foreach() - item_set_selected(0); - item_set(scroll + choice); - item_set_selected(1); - delwin(list); - delwin(dialog); - return button; - case TAB: - case KEY_LEFT: - case KEY_RIGHT: - button = ((key == KEY_LEFT ? --button : ++button) < 0) - ? 1 : (button > 1 ? 0 : button); - - print_buttons(dialog, height, width, button); - wrefresh(dialog); - break; - case 'X': - case 'x': - key = KEY_ESC; - break; - case KEY_ESC: - key = on_key_esc(dialog); - break; - case KEY_RESIZE: - delwin(list); - delwin(dialog); - on_key_resize(); - goto do_resize; - } - - /* Now, update everything... */ - doupdate(); - } - delwin(list); - delwin(dialog); - return key; /* ESC pressed */ -} diff --git a/payloads/external/SeaBIOS/scripts/kconfig/lxdialog/dialog.h b/payloads/external/SeaBIOS/scripts/kconfig/lxdialog/dialog.h deleted file mode 100644 index b4343d38..00000000 --- a/payloads/external/SeaBIOS/scripts/kconfig/lxdialog/dialog.h +++ /dev/null @@ -1,257 +0,0 @@ -/* - * dialog.h -- common declarations for all dialog modules - * - * AUTHOR: Savio Lam (lam836@cs.cuhk.hk) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <sys/types.h> -#include <fcntl.h> -#include <unistd.h> -#include <ctype.h> -#include <stdlib.h> -#include <string.h> -#include <stdbool.h> - -#ifndef KBUILD_NO_NLS -# include <libintl.h> -#else -# define gettext(Msgid) ((const char *) (Msgid)) -#endif - -#ifdef __sun__ -#define CURS_MACROS -#endif -#include CURSES_LOC - -/* - * Colors in ncurses 1.9.9e do not work properly since foreground and - * background colors are OR'd rather than separately masked. This version - * of dialog was hacked to work with ncurses 1.9.9e, making it incompatible - * with standard curses. The simplest fix (to make this work with standard - * curses) uses the wbkgdset() function, not used in the original hack. - * Turn it off if we're building with 1.9.9e, since it just confuses things. - */ -#if defined(NCURSES_VERSION) && defined(_NEED_WRAP) && !defined(GCC_PRINTFLIKE) -#define OLD_NCURSES 1 -#undef wbkgdset -#define wbkgdset(w,p) /*nothing */ -#else -#define OLD_NCURSES 0 -#endif - -#define TR(params) _tracef params - -#define KEY_ESC 27 -#define TAB 9 -#define MAX_LEN 2048 -#define BUF_SIZE (10*1024) -#define MIN(x,y) (x < y ? x : y) -#define MAX(x,y) (x > y ? x : y) - -#ifndef ACS_ULCORNER -#define ACS_ULCORNER '+' -#endif -#ifndef ACS_LLCORNER -#define ACS_LLCORNER '+' -#endif -#ifndef ACS_URCORNER -#define ACS_URCORNER '+' -#endif -#ifndef ACS_LRCORNER -#define ACS_LRCORNER '+' -#endif -#ifndef ACS_HLINE -#define ACS_HLINE '-' -#endif -#ifndef ACS_VLINE -#define ACS_VLINE '|' -#endif -#ifndef ACS_LTEE -#define ACS_LTEE '+' -#endif -#ifndef ACS_RTEE -#define ACS_RTEE '+' -#endif -#ifndef ACS_UARROW -#define ACS_UARROW '^' -#endif -#ifndef ACS_DARROW -#define ACS_DARROW 'v' -#endif - -/* error return codes */ -#define ERRDISPLAYTOOSMALL (KEY_MAX + 1) - -/* - * Color definitions - */ -struct dialog_color { - chtype atr; /* Color attribute */ - int fg; /* foreground */ - int bg; /* background */ - int hl; /* highlight this item */ -}; - -struct subtitle_list { - struct subtitle_list *next; - const char *text; -}; - -struct dialog_info { - const char *backtitle; - struct subtitle_list *subtitles; - struct dialog_color screen; - struct dialog_color shadow; - struct dialog_color dialog; - struct dialog_color title; - struct dialog_color border; - struct dialog_color button_active; - struct dialog_color button_inactive; - struct dialog_color button_key_active; - struct dialog_color button_key_inactive; - struct dialog_color button_label_active; - struct dialog_color button_label_inactive; - struct dialog_color inputbox; - struct dialog_color inputbox_border; - struct dialog_color searchbox; - struct dialog_color searchbox_title; - struct dialog_color searchbox_border; - struct dialog_color position_indicator; - struct dialog_color menubox; - struct dialog_color menubox_border; - struct dialog_color item; - struct dialog_color item_selected; - struct dialog_color tag; - struct dialog_color tag_selected; - struct dialog_color tag_key; - struct dialog_color tag_key_selected; - struct dialog_color check; - struct dialog_color check_selected; - struct dialog_color uarrow; - struct dialog_color darrow; -}; - -/* - * Global variables - */ -extern struct dialog_info dlg; -extern char dialog_input_result[]; -extern int saved_x, saved_y; /* Needed in signal handler in mconf.c */ - -/* - * Function prototypes - */ - -/* item list as used by checklist and menubox */ -void item_reset(void); -void item_make(const char *fmt, ...); -void item_add_str(const char *fmt, ...); -void item_set_tag(char tag); -void item_set_data(void *p); -void item_set_selected(int val); -int item_activate_selected(void); -void *item_data(void); -char item_tag(void); - -/* item list manipulation for lxdialog use */ -#define MAXITEMSTR 200 -struct dialog_item { - char str[MAXITEMSTR]; /* promtp displayed */ - char tag; - void *data; /* pointer to menu item - used by menubox+checklist */ - int selected; /* Set to 1 by dialog_*() function if selected. */ -}; - -/* list of lialog_items */ -struct dialog_list { - struct dialog_item node; - struct dialog_list *next; -}; - -extern struct dialog_list *item_cur; -extern struct dialog_list item_nil; -extern struct dialog_list *item_head; - -int item_count(void); -void item_set(int n); -int item_n(void); -const char *item_str(void); -int item_is_selected(void); -int item_is_tag(char tag); -#define item_foreach() \ - for (item_cur = item_head ? item_head: item_cur; \ - item_cur && (item_cur != &item_nil); item_cur = item_cur->next) - -/* generic key handlers */ -int on_key_esc(WINDOW *win); -int on_key_resize(void); - -/* minimum (re)size values */ -#define CHECKLIST_HEIGTH_MIN 6 /* For dialog_checklist() */ -#define CHECKLIST_WIDTH_MIN 6 -#define INPUTBOX_HEIGTH_MIN 2 /* For dialog_inputbox() */ -#define INPUTBOX_WIDTH_MIN 2 -#define MENUBOX_HEIGTH_MIN 15 /* For dialog_menu() */ -#define MENUBOX_WIDTH_MIN 65 -#define TEXTBOX_HEIGTH_MIN 8 /* For dialog_textbox() */ -#define TEXTBOX_WIDTH_MIN 8 -#define YESNO_HEIGTH_MIN 4 /* For dialog_yesno() */ -#define YESNO_WIDTH_MIN 4 -#define WINDOW_HEIGTH_MIN 19 /* For init_dialog() */ -#define WINDOW_WIDTH_MIN 80 - -int init_dialog(const char *backtitle); -void set_dialog_backtitle(const char *backtitle); -void set_dialog_subtitles(struct subtitle_list *subtitles); -void end_dialog(int x, int y); -void attr_clear(WINDOW * win, int height, int width, chtype attr); -void dialog_clear(void); -void print_autowrap(WINDOW * win, const char *prompt, int width, int y, int x); -void print_button(WINDOW * win, const char *label, int y, int x, int selected); -void print_title(WINDOW *dialog, const char *title, int width); -void draw_box(WINDOW * win, int y, int x, int height, int width, chtype box, - chtype border); -void draw_shadow(WINDOW * win, int y, int x, int height, int width); - -int first_alpha(const char *string, const char *exempt); -int dialog_yesno(const char *title, const char *prompt, int height, int width); -int dialog_msgbox(const char *title, const char *prompt, int height, - int width, int pause); - - -typedef void (*update_text_fn)(char *buf, size_t start, size_t end, void - *_data); -int dialog_textbox(const char *title, char *tbuf, int initial_height, - int initial_width, int *keys, int *_vscroll, int *_hscroll, - update_text_fn update_text, void *data); -int dialog_menu(const char *title, const char *prompt, - const void *selected, int *s_scroll); -int dialog_checklist(const char *title, const char *prompt, int height, - int width, int list_height); -int dialog_inputbox(const char *title, const char *prompt, int height, - int width, const char *init); - -/* - * This is the base for fictitious keys, which activate - * the buttons. - * - * Mouse-generated keys are the following: - * -- the first 32 are used as numbers, in addition to '0'-'9' - * -- the lowercase are used to signal mouse-enter events (M_EVENT + 'o') - * -- uppercase chars are used to invoke the button (M_EVENT + 'O') - */ -#define M_EVENT (KEY_MAX+1) diff --git a/payloads/external/SeaBIOS/scripts/kconfig/lxdialog/inputbox.c b/payloads/external/SeaBIOS/scripts/kconfig/lxdialog/inputbox.c deleted file mode 100644 index d58de1dc..00000000 --- a/payloads/external/SeaBIOS/scripts/kconfig/lxdialog/inputbox.c +++ /dev/null @@ -1,301 +0,0 @@ -/* - * inputbox.c -- implements the input box - * - * ORIGINAL AUTHOR: Savio Lam (lam836@cs.cuhk.hk) - * MODIFIED FOR LINUX KERNEL CONFIG BY: William Roadcap (roadcap@cfw.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include "dialog.h" - -char dialog_input_result[MAX_LEN + 1]; - -/* - * Print the termination buttons - */ -static void print_buttons(WINDOW * dialog, int height, int width, int selected) -{ - int x = width / 2 - 11; - int y = height - 2; - - print_button(dialog, gettext(" Ok "), y, x, selected == 0); - print_button(dialog, gettext(" Help "), y, x + 14, selected == 1); - - wmove(dialog, y, x + 1 + 14 * selected); - wrefresh(dialog); -} - -/* - * Display a dialog box for inputing a string - */ -int dialog_inputbox(const char *title, const char *prompt, int height, int width, - const char *init) -{ - int i, x, y, box_y, box_x, box_width; - int input_x = 0, key = 0, button = -1; - int show_x, len, pos; - char *instr = dialog_input_result; - WINDOW *dialog; - - if (!init) - instr[0] = '\0'; - else - strcpy(instr, init); - -do_resize: - if (getmaxy(stdscr) <= (height - INPUTBOX_HEIGTH_MIN)) - return -ERRDISPLAYTOOSMALL; - if (getmaxx(stdscr) <= (width - INPUTBOX_WIDTH_MIN)) - return -ERRDISPLAYTOOSMALL; - - /* center dialog box on screen */ - x = (getmaxx(stdscr) - width) / 2; - y = (getmaxy(stdscr) - height) / 2; - - draw_shadow(stdscr, y, x, height, width); - - dialog = newwin(height, width, y, x); - keypad(dialog, TRUE); - - draw_box(dialog, 0, 0, height, width, - dlg.dialog.atr, dlg.border.atr); - wattrset(dialog, dlg.border.atr); - mvwaddch(dialog, height - 3, 0, ACS_LTEE); - for (i = 0; i < width - 2; i++) - waddch(dialog, ACS_HLINE); - wattrset(dialog, dlg.dialog.atr); - waddch(dialog, ACS_RTEE); - - print_title(dialog, title, width); - - wattrset(dialog, dlg.dialog.atr); - print_autowrap(dialog, prompt, width - 2, 1, 3); - - /* Draw the input field box */ - box_width = width - 6; - getyx(dialog, y, x); - box_y = y + 2; - box_x = (width - box_width) / 2; - draw_box(dialog, y + 1, box_x - 1, 3, box_width + 2, - dlg.dialog.atr, dlg.border.atr); - - print_buttons(dialog, height, width, 0); - - /* Set up the initial value */ - wmove(dialog, box_y, box_x); - wattrset(dialog, dlg.inputbox.atr); - - len = strlen(instr); - pos = len; - - if (len >= box_width) { - show_x = len - box_width + 1; - input_x = box_width - 1; - for (i = 0; i < box_width - 1; i++) - waddch(dialog, instr[show_x + i]); - } else { - show_x = 0; - input_x = len; - waddstr(dialog, instr); - } - - wmove(dialog, box_y, box_x + input_x); - - wrefresh(dialog); - - while (key != KEY_ESC) { - key = wgetch(dialog); - - if (button == -1) { /* Input box selected */ - switch (key) { - case TAB: - case KEY_UP: - case KEY_DOWN: - break; - case KEY_BACKSPACE: - case 127: - if (pos) { - wattrset(dialog, dlg.inputbox.atr); - if (input_x == 0) { - show_x--; - } else - input_x--; - - if (pos < len) { - for (i = pos - 1; i < len; i++) { - instr[i] = instr[i+1]; - } - } - - pos--; - len--; - instr[len] = '\0'; - wmove(dialog, box_y, box_x); - for (i = 0; i < box_width; i++) { - if (!instr[show_x + i]) { - waddch(dialog, ' '); - break; - } - waddch(dialog, instr[show_x + i]); - } - wmove(dialog, box_y, input_x + box_x); - wrefresh(dialog); - } - continue; - case KEY_LEFT: - if (pos > 0) { - if (input_x > 0) { - wmove(dialog, box_y, --input_x + box_x); - } else if (input_x == 0) { - show_x--; - wmove(dialog, box_y, box_x); - for (i = 0; i < box_width; i++) { - if (!instr[show_x + i]) { - waddch(dialog, ' '); - break; - } - waddch(dialog, instr[show_x + i]); - } - wmove(dialog, box_y, box_x); - } - pos--; - } - continue; - case KEY_RIGHT: - if (pos < len) { - if (input_x < box_width - 1) { - wmove(dialog, box_y, ++input_x + box_x); - } else if (input_x == box_width - 1) { - show_x++; - wmove(dialog, box_y, box_x); - for (i = 0; i < box_width; i++) { - if (!instr[show_x + i]) { - waddch(dialog, ' '); - break; - } - waddch(dialog, instr[show_x + i]); - } - wmove(dialog, box_y, input_x + box_x); - } - pos++; - } - continue; - default: - if (key < 0x100 && isprint(key)) { - if (len < MAX_LEN) { - wattrset(dialog, dlg.inputbox.atr); - if (pos < len) { - for (i = len; i > pos; i--) - instr[i] = instr[i-1]; - instr[pos] = key; - } else { - instr[len] = key; - } - pos++; - len++; - instr[len] = '\0'; - - if (input_x == box_width - 1) { - show_x++; - } else { - input_x++; - } - - wmove(dialog, box_y, box_x); - for (i = 0; i < box_width; i++) { - if (!instr[show_x + i]) { - waddch(dialog, ' '); - break; - } - waddch(dialog, instr[show_x + i]); - } - wmove(dialog, box_y, input_x + box_x); - wrefresh(dialog); - } else - flash(); /* Alarm user about overflow */ - continue; - } - } - } - switch (key) { - case 'O': - case 'o': - delwin(dialog); - return 0; - case 'H': - case 'h': - delwin(dialog); - return 1; - case KEY_UP: - case KEY_LEFT: - switch (button) { - case -1: - button = 1; /* Indicates "Help" button is selected */ - print_buttons(dialog, height, width, 1); - break; - case 0: - button = -1; /* Indicates input box is selected */ - print_buttons(dialog, height, width, 0); - wmove(dialog, box_y, box_x + input_x); - wrefresh(dialog); - break; - case 1: - button = 0; /* Indicates "OK" button is selected */ - print_buttons(dialog, height, width, 0); - break; - } - break; - case TAB: - case KEY_DOWN: - case KEY_RIGHT: - switch (button) { - case -1: - button = 0; /* Indicates "OK" button is selected */ - print_buttons(dialog, height, width, 0); - break; - case 0: - button = 1; /* Indicates "Help" button is selected */ - print_buttons(dialog, height, width, 1); - break; - case 1: - button = -1; /* Indicates input box is selected */ - print_buttons(dialog, height, width, 0); - wmove(dialog, box_y, box_x + input_x); - wrefresh(dialog); - break; - } - break; - case ' ': - case '\n': - delwin(dialog); - return (button == -1 ? 0 : button); - case 'X': - case 'x': - key = KEY_ESC; - break; - case KEY_ESC: - key = on_key_esc(dialog); - break; - case KEY_RESIZE: - delwin(dialog); - on_key_resize(); - goto do_resize; - } - } - - delwin(dialog); - return KEY_ESC; /* ESC pressed */ -} diff --git a/payloads/external/SeaBIOS/scripts/kconfig/lxdialog/menubox.c b/payloads/external/SeaBIOS/scripts/kconfig/lxdialog/menubox.c deleted file mode 100644 index 11ae9ad7..00000000 --- a/payloads/external/SeaBIOS/scripts/kconfig/lxdialog/menubox.c +++ /dev/null @@ -1,437 +0,0 @@ -/* - * menubox.c -- implements the menu box - * - * ORIGINAL AUTHOR: Savio Lam (lam836@cs.cuhk.hk) - * MODIFIED FOR LINUX KERNEL CONFIG BY: William Roadcap (roadcapw@cfw.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -/* - * Changes by Clifford Wolf (god@clifford.at) - * - * [ 1998-06-13 ] - * - * *) A bugfix for the Page-Down problem - * - * *) Formerly when I used Page Down and Page Up, the cursor would be set - * to the first position in the menu box. Now lxdialog is a bit - * smarter and works more like other menu systems (just have a look at - * it). - * - * *) Formerly if I selected something my scrolling would be broken because - * lxdialog is re-invoked by the Menuconfig shell script, can't - * remember the last scrolling position, and just sets it so that the - * cursor is at the bottom of the box. Now it writes the temporary file - * lxdialog.scrltmp which contains this information. The file is - * deleted by lxdialog if the user leaves a submenu or enters a new - * one, but it would be nice if Menuconfig could make another "rm -f" - * just to be sure. Just try it out - you will recognise a difference! - * - * [ 1998-06-14 ] - * - * *) Now lxdialog is crash-safe against broken "lxdialog.scrltmp" files - * and menus change their size on the fly. - * - * *) If for some reason the last scrolling position is not saved by - * lxdialog, it sets the scrolling so that the selected item is in the - * middle of the menu box, not at the bottom. - * - * 02 January 1999, Michael Elizabeth Chastain (mec@shout.net) - * Reset 'scroll' to 0 if the value from lxdialog.scrltmp is bogus. - * This fixes a bug in Menuconfig where using ' ' to descend into menus - * would leave mis-synchronized lxdialog.scrltmp files lying around, - * fscanf would read in 'scroll', and eventually that value would get used. - */ - -#include "dialog.h" - -static int menu_width, item_x; - -/* - * Print menu item - */ -static void do_print_item(WINDOW * win, const char *item, int line_y, - int selected, int hotkey) -{ - int j; - char *menu_item = malloc(menu_width + 1); - - strncpy(menu_item, item, menu_width - item_x); - menu_item[menu_width - item_x] = '\0'; - j = first_alpha(menu_item, "YyNnMmHh"); - - /* Clear 'residue' of last item */ - wattrset(win, dlg.menubox.atr); - wmove(win, line_y, 0); -#if OLD_NCURSES - { - int i; - for (i = 0; i < menu_width; i++) - waddch(win, ' '); - } -#else - wclrtoeol(win); -#endif - wattrset(win, selected ? dlg.item_selected.atr : dlg.item.atr); - mvwaddstr(win, line_y, item_x, menu_item); - if (hotkey) { - wattrset(win, selected ? dlg.tag_key_selected.atr - : dlg.tag_key.atr); - mvwaddch(win, line_y, item_x + j, menu_item[j]); - } - if (selected) { - wmove(win, line_y, item_x + 1); - } - free(menu_item); - wrefresh(win); -} - -#define print_item(index, choice, selected) \ -do { \ - item_set(index); \ - do_print_item(menu, item_str(), choice, selected, !item_is_tag(':')); \ -} while (0) - -/* - * Print the scroll indicators. - */ -static void print_arrows(WINDOW * win, int item_no, int scroll, int y, int x, - int height) -{ - int cur_y, cur_x; - - getyx(win, cur_y, cur_x); - - wmove(win, y, x); - - if (scroll > 0) { - wattrset(win, dlg.uarrow.atr); - waddch(win, ACS_UARROW); - waddstr(win, "(-)"); - } else { - wattrset(win, dlg.menubox.atr); - waddch(win, ACS_HLINE); - waddch(win, ACS_HLINE); - waddch(win, ACS_HLINE); - waddch(win, ACS_HLINE); - } - - y = y + height + 1; - wmove(win, y, x); - wrefresh(win); - - if ((height < item_no) && (scroll + height < item_no)) { - wattrset(win, dlg.darrow.atr); - waddch(win, ACS_DARROW); - waddstr(win, "(+)"); - } else { - wattrset(win, dlg.menubox_border.atr); - waddch(win, ACS_HLINE); - waddch(win, ACS_HLINE); - waddch(win, ACS_HLINE); - waddch(win, ACS_HLINE); - } - - wmove(win, cur_y, cur_x); - wrefresh(win); -} - -/* - * Display the termination buttons. - */ -static void print_buttons(WINDOW * win, int height, int width, int selected) -{ - int x = width / 2 - 28; - int y = height - 2; - - print_button(win, gettext("Select"), y, x, selected == 0); - print_button(win, gettext(" Exit "), y, x + 12, selected == 1); - print_button(win, gettext(" Help "), y, x + 24, selected == 2); - print_button(win, gettext(" Save "), y, x + 36, selected == 3); - print_button(win, gettext(" Load "), y, x + 48, selected == 4); - - wmove(win, y, x + 1 + 12 * selected); - wrefresh(win); -} - -/* scroll up n lines (n may be negative) */ -static void do_scroll(WINDOW *win, int *scroll, int n) -{ - /* Scroll menu up */ - scrollok(win, TRUE); - wscrl(win, n); - scrollok(win, FALSE); - *scroll = *scroll + n; - wrefresh(win); -} - -/* - * Display a menu for choosing among a number of options - */ -int dialog_menu(const char *title, const char *prompt, - const void *selected, int *s_scroll) -{ - int i, j, x, y, box_x, box_y; - int height, width, menu_height; - int key = 0, button = 0, scroll = 0, choice = 0; - int first_item = 0, max_choice; - WINDOW *dialog, *menu; - -do_resize: - height = getmaxy(stdscr); - width = getmaxx(stdscr); - if (height < MENUBOX_HEIGTH_MIN || width < MENUBOX_WIDTH_MIN) - return -ERRDISPLAYTOOSMALL; - - height -= 4; - width -= 5; - menu_height = height - 10; - - max_choice = MIN(menu_height, item_count()); - - /* center dialog box on screen */ - x = (getmaxx(stdscr) - width) / 2; - y = (getmaxy(stdscr) - height) / 2; - - draw_shadow(stdscr, y, x, height, width); - - dialog = newwin(height, width, y, x); - keypad(dialog, TRUE); - - draw_box(dialog, 0, 0, height, width, - dlg.dialog.atr, dlg.border.atr); - wattrset(dialog, dlg.border.atr); - mvwaddch(dialog, height - 3, 0, ACS_LTEE); - for (i = 0; i < width - 2; i++) - waddch(dialog, ACS_HLINE); - wattrset(dialog, dlg.dialog.atr); - wbkgdset(dialog, dlg.dialog.atr & A_COLOR); - waddch(dialog, ACS_RTEE); - - print_title(dialog, title, width); - - wattrset(dialog, dlg.dialog.atr); - print_autowrap(dialog, prompt, width - 2, 1, 3); - - menu_width = width - 6; - box_y = height - menu_height - 5; - box_x = (width - menu_width) / 2 - 1; - - /* create new window for the menu */ - menu = subwin(dialog, menu_height, menu_width, - y + box_y + 1, x + box_x + 1); - keypad(menu, TRUE); - - /* draw a box around the menu items */ - draw_box(dialog, box_y, box_x, menu_height + 2, menu_width + 2, - dlg.menubox_border.atr, dlg.menubox.atr); - - if (menu_width >= 80) - item_x = (menu_width - 70) / 2; - else - item_x = 4; - - /* Set choice to default item */ - item_foreach() - if (selected && (selected == item_data())) - choice = item_n(); - /* get the saved scroll info */ - scroll = *s_scroll; - if ((scroll <= choice) && (scroll + max_choice > choice) && - (scroll >= 0) && (scroll + max_choice <= item_count())) { - first_item = scroll; - choice = choice - scroll; - } else { - scroll = 0; - } - if ((choice >= max_choice)) { - if (choice >= item_count() - max_choice / 2) - scroll = first_item = item_count() - max_choice; - else - scroll = first_item = choice - max_choice / 2; - choice = choice - scroll; - } - - /* Print the menu */ - for (i = 0; i < max_choice; i++) { - print_item(first_item + i, i, i == choice); - } - - wnoutrefresh(menu); - - print_arrows(dialog, item_count(), scroll, - box_y, box_x + item_x + 1, menu_height); - - print_buttons(dialog, height, width, 0); - wmove(menu, choice, item_x + 1); - wrefresh(menu); - - while (key != KEY_ESC) { - key = wgetch(menu); - - if (key < 256 && isalpha(key)) - key = tolower(key); - - if (strchr("ynmh", key)) - i = max_choice; - else { - for (i = choice + 1; i < max_choice; i++) { - item_set(scroll + i); - j = first_alpha(item_str(), "YyNnMmHh"); - if (key == tolower(item_str()[j])) - break; - } - if (i == max_choice) - for (i = 0; i < max_choice; i++) { - item_set(scroll + i); - j = first_alpha(item_str(), "YyNnMmHh"); - if (key == tolower(item_str()[j])) - break; - } - } - - if (item_count() != 0 && - (i < max_choice || - key == KEY_UP || key == KEY_DOWN || - key == '-' || key == '+' || - key == KEY_PPAGE || key == KEY_NPAGE)) { - /* Remove highligt of current item */ - print_item(scroll + choice, choice, FALSE); - - if (key == KEY_UP || key == '-') { - if (choice < 2 && scroll) { - /* Scroll menu down */ - do_scroll(menu, &scroll, -1); - - print_item(scroll, 0, FALSE); - } else - choice = MAX(choice - 1, 0); - - } else if (key == KEY_DOWN || key == '+') { - print_item(scroll+choice, choice, FALSE); - - if ((choice > max_choice - 3) && - (scroll + max_choice < item_count())) { - /* Scroll menu up */ - do_scroll(menu, &scroll, 1); - - print_item(scroll+max_choice - 1, - max_choice - 1, FALSE); - } else - choice = MIN(choice + 1, max_choice - 1); - - } else if (key == KEY_PPAGE) { - scrollok(menu, TRUE); - for (i = 0; (i < max_choice); i++) { - if (scroll > 0) { - do_scroll(menu, &scroll, -1); - print_item(scroll, 0, FALSE); - } else { - if (choice > 0) - choice--; - } - } - - } else if (key == KEY_NPAGE) { - for (i = 0; (i < max_choice); i++) { - if (scroll + max_choice < item_count()) { - do_scroll(menu, &scroll, 1); - print_item(scroll+max_choice-1, - max_choice - 1, FALSE); - } else { - if (choice + 1 < max_choice) - choice++; - } - } - } else - choice = i; - - print_item(scroll + choice, choice, TRUE); - - print_arrows(dialog, item_count(), scroll, - box_y, box_x + item_x + 1, menu_height); - - wnoutrefresh(dialog); - wrefresh(menu); - - continue; /* wait for another key press */ - } - - switch (key) { - case KEY_LEFT: - case TAB: - case KEY_RIGHT: - button = ((key == KEY_LEFT ? --button : ++button) < 0) - ? 4 : (button > 4 ? 0 : button); - - print_buttons(dialog, height, width, button); - wrefresh(menu); - break; - case ' ': - case 's': - case 'y': - case 'n': - case 'm': - case '/': - case 'h': - case '?': - case 'z': - case '\n': - /* save scroll info */ - *s_scroll = scroll; - delwin(menu); - delwin(dialog); - item_set(scroll + choice); - item_set_selected(1); - switch (key) { - case 'h': - case '?': - return 2; - case 's': - case 'y': - return 5; - case 'n': - return 6; - case 'm': - return 7; - case ' ': - return 8; - case '/': - return 9; - case 'z': - return 10; - case '\n': - return button; - } - return 0; - case 'e': - case 'x': - key = KEY_ESC; - break; - case KEY_ESC: - key = on_key_esc(menu); - break; - case KEY_RESIZE: - on_key_resize(); - delwin(menu); - delwin(dialog); - goto do_resize; - } - } - delwin(menu); - delwin(dialog); - return key; /* ESC pressed */ -} diff --git a/payloads/external/SeaBIOS/scripts/kconfig/lxdialog/textbox.c b/payloads/external/SeaBIOS/scripts/kconfig/lxdialog/textbox.c deleted file mode 100644 index 1773319b..00000000 --- a/payloads/external/SeaBIOS/scripts/kconfig/lxdialog/textbox.c +++ /dev/null @@ -1,408 +0,0 @@ -/* - * textbox.c -- implements the text box - * - * ORIGINAL AUTHOR: Savio Lam (lam836@cs.cuhk.hk) - * MODIFIED FOR LINUX KERNEL CONFIG BY: William Roadcap (roadcap@cfw.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include "dialog.h" - -static void back_lines(int n); -static void print_page(WINDOW *win, int height, int width, update_text_fn - update_text, void *data); -static void print_line(WINDOW *win, int row, int width); -static char *get_line(void); -static void print_position(WINDOW * win); - -static int hscroll; -static int begin_reached, end_reached, page_length; -static char *buf; -static char *page; - -/* - * refresh window content - */ -static void refresh_text_box(WINDOW *dialog, WINDOW *box, int boxh, int boxw, - int cur_y, int cur_x, update_text_fn update_text, - void *data) -{ - print_page(box, boxh, boxw, update_text, data); - print_position(dialog); - wmove(dialog, cur_y, cur_x); /* Restore cursor position */ - wrefresh(dialog); -} - - -/* - * Display text from a file in a dialog box. - * - * keys is a null-terminated array - * update_text() may not add or remove any '\n' or '\0' in tbuf - */ -int dialog_textbox(const char *title, char *tbuf, int initial_height, - int initial_width, int *keys, int *_vscroll, int *_hscroll, - update_text_fn update_text, void *data) -{ - int i, x, y, cur_x, cur_y, key = 0; - int height, width, boxh, boxw; - WINDOW *dialog, *box; - bool done = false; - - begin_reached = 1; - end_reached = 0; - page_length = 0; - hscroll = 0; - buf = tbuf; - page = buf; /* page is pointer to start of page to be displayed */ - - if (_vscroll && *_vscroll) { - begin_reached = 0; - - for (i = 0; i < *_vscroll; i++) - get_line(); - } - if (_hscroll) - hscroll = *_hscroll; - -do_resize: - getmaxyx(stdscr, height, width); - if (height < TEXTBOX_HEIGTH_MIN || width < TEXTBOX_WIDTH_MIN) - return -ERRDISPLAYTOOSMALL; - if (initial_height != 0) - height = initial_height; - else - if (height > 4) - height -= 4; - else - height = 0; - if (initial_width != 0) - width = initial_width; - else - if (width > 5) - width -= 5; - else - width = 0; - - /* center dialog box on screen */ - x = (getmaxx(stdscr) - width) / 2; - y = (getmaxy(stdscr) - height) / 2; - - draw_shadow(stdscr, y, x, height, width); - - dialog = newwin(height, width, y, x); - keypad(dialog, TRUE); - - /* Create window for box region, used for scrolling text */ - boxh = height - 4; - boxw = width - 2; - box = subwin(dialog, boxh, boxw, y + 1, x + 1); - wattrset(box, dlg.dialog.atr); - wbkgdset(box, dlg.dialog.atr & A_COLOR); - - keypad(box, TRUE); - - /* register the new window, along with its borders */ - draw_box(dialog, 0, 0, height, width, - dlg.dialog.atr, dlg.border.atr); - - wattrset(dialog, dlg.border.atr); - mvwaddch(dialog, height - 3, 0, ACS_LTEE); - for (i = 0; i < width - 2; i++) - waddch(dialog, ACS_HLINE); - wattrset(dialog, dlg.dialog.atr); - wbkgdset(dialog, dlg.dialog.atr & A_COLOR); - waddch(dialog, ACS_RTEE); - - print_title(dialog, title, width); - - print_button(dialog, gettext(" Exit "), height - 2, width / 2 - 4, TRUE); - wnoutrefresh(dialog); - getyx(dialog, cur_y, cur_x); /* Save cursor position */ - - /* Print first page of text */ - attr_clear(box, boxh, boxw, dlg.dialog.atr); - refresh_text_box(dialog, box, boxh, boxw, cur_y, cur_x, update_text, - data); - - while (!done) { - key = wgetch(dialog); - switch (key) { - case 'E': /* Exit */ - case 'e': - case 'X': - case 'x': - case 'q': - case '\n': - done = true; - break; - case 'g': /* First page */ - case KEY_HOME: - if (!begin_reached) { - begin_reached = 1; - page = buf; - refresh_text_box(dialog, box, boxh, boxw, - cur_y, cur_x, update_text, - data); - } - break; - case 'G': /* Last page */ - case KEY_END: - - end_reached = 1; - /* point to last char in buf */ - page = buf + strlen(buf); - back_lines(boxh); - refresh_text_box(dialog, box, boxh, boxw, cur_y, - cur_x, update_text, data); - break; - case 'K': /* Previous line */ - case 'k': - case KEY_UP: - if (begin_reached) - break; - - back_lines(page_length + 1); - refresh_text_box(dialog, box, boxh, boxw, cur_y, - cur_x, update_text, data); - break; - case 'B': /* Previous page */ - case 'b': - case 'u': - case KEY_PPAGE: - if (begin_reached) - break; - back_lines(page_length + boxh); - refresh_text_box(dialog, box, boxh, boxw, cur_y, - cur_x, update_text, data); - break; - case 'J': /* Next line */ - case 'j': - case KEY_DOWN: - if (end_reached) - break; - - back_lines(page_length - 1); - refresh_text_box(dialog, box, boxh, boxw, cur_y, - cur_x, update_text, data); - break; - case KEY_NPAGE: /* Next page */ - case ' ': - case 'd': - if (end_reached) - break; - - begin_reached = 0; - refresh_text_box(dialog, box, boxh, boxw, cur_y, - cur_x, update_text, data); - break; - case '0': /* Beginning of line */ - case 'H': /* Scroll left */ - case 'h': - case KEY_LEFT: - if (hscroll <= 0) - break; - - if (key == '0') - hscroll = 0; - else - hscroll--; - /* Reprint current page to scroll horizontally */ - back_lines(page_length); - refresh_text_box(dialog, box, boxh, boxw, cur_y, - cur_x, update_text, data); - break; - case 'L': /* Scroll right */ - case 'l': - case KEY_RIGHT: - if (hscroll >= MAX_LEN) - break; - hscroll++; - /* Reprint current page to scroll horizontally */ - back_lines(page_length); - refresh_text_box(dialog, box, boxh, boxw, cur_y, - cur_x, update_text, data); - break; - case KEY_ESC: - if (on_key_esc(dialog) == KEY_ESC) - done = true; - break; - case KEY_RESIZE: - back_lines(height); - delwin(box); - delwin(dialog); - on_key_resize(); - goto do_resize; - default: - for (i = 0; keys[i]; i++) { - if (key == keys[i]) { - done = true; - break; - } - } - } - } - delwin(box); - delwin(dialog); - if (_vscroll) { - const char *s; - - s = buf; - *_vscroll = 0; - back_lines(page_length); - while (s < page && (s = strchr(s, '\n'))) { - (*_vscroll)++; - s++; - } - } - if (_hscroll) - *_hscroll = hscroll; - return key; -} - -/* - * Go back 'n' lines in text. Called by dialog_textbox(). - * 'page' will be updated to point to the desired line in 'buf'. - */ -static void back_lines(int n) -{ - int i; - - begin_reached = 0; - /* Go back 'n' lines */ - for (i = 0; i < n; i++) { - if (*page == '\0') { - if (end_reached) { - end_reached = 0; - continue; - } - } - if (page == buf) { - begin_reached = 1; - return; - } - page--; - do { - if (page == buf) { - begin_reached = 1; - return; - } - page--; - } while (*page != '\n'); - page++; - } -} - -/* - * Print a new page of text. - */ -static void print_page(WINDOW *win, int height, int width, update_text_fn - update_text, void *data) -{ - int i, passed_end = 0; - - if (update_text) { - char *end; - - for (i = 0; i < height; i++) - get_line(); - end = page; - back_lines(height); - update_text(buf, page - buf, end - buf, data); - } - - page_length = 0; - for (i = 0; i < height; i++) { - print_line(win, i, width); - if (!passed_end) - page_length++; - if (end_reached && !passed_end) - passed_end = 1; - } - wnoutrefresh(win); -} - -/* - * Print a new line of text. - */ -static void print_line(WINDOW * win, int row, int width) -{ - char *line; - - line = get_line(); - line += MIN(strlen(line), hscroll); /* Scroll horizontally */ - wmove(win, row, 0); /* move cursor to correct line */ - waddch(win, ' '); - waddnstr(win, line, MIN(strlen(line), width - 2)); - - /* Clear 'residue' of previous line */ -#if OLD_NCURSES - { - int x = getcurx(win); - int i; - for (i = 0; i < width - x; i++) - waddch(win, ' '); - } -#else - wclrtoeol(win); -#endif -} - -/* - * Return current line of text. Called by dialog_textbox() and print_line(). - * 'page' should point to start of current line before calling, and will be - * updated to point to start of next line. - */ -static char *get_line(void) -{ - int i = 0; - static char line[MAX_LEN + 1]; - - end_reached = 0; - while (*page != '\n') { - if (*page == '\0') { - end_reached = 1; - break; - } else if (i < MAX_LEN) - line[i++] = *(page++); - else { - /* Truncate lines longer than MAX_LEN characters */ - if (i == MAX_LEN) - line[i++] = '\0'; - page++; - } - } - if (i <= MAX_LEN) - line[i] = '\0'; - if (!end_reached) - page++; /* move past '\n' */ - - return line; -} - -/* - * Print current position - */ -static void print_position(WINDOW * win) -{ - int percent; - - wattrset(win, dlg.position_indicator.atr); - wbkgdset(win, dlg.position_indicator.atr & A_COLOR); - percent = (page - buf) * 100 / strlen(buf); - wmove(win, getmaxy(win) - 3, getmaxx(win) - 9); - wprintw(win, "(%3d%%)", percent); -} diff --git a/payloads/external/SeaBIOS/scripts/kconfig/lxdialog/util.c b/payloads/external/SeaBIOS/scripts/kconfig/lxdialog/util.c deleted file mode 100644 index 2a0d182e..00000000 --- a/payloads/external/SeaBIOS/scripts/kconfig/lxdialog/util.c +++ /dev/null @@ -1,713 +0,0 @@ -/* - * util.c - * - * ORIGINAL AUTHOR: Savio Lam (lam836@cs.cuhk.hk) - * MODIFIED FOR LINUX KERNEL CONFIG BY: William Roadcap (roadcap@cfw.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <stdarg.h> - -#include "dialog.h" - -/* Needed in signal handler in mconf.c */ -int saved_x, saved_y; - -struct dialog_info dlg; - -static void set_mono_theme(void) -{ - dlg.screen.atr = A_NORMAL; - dlg.shadow.atr = A_NORMAL; - dlg.dialog.atr = A_NORMAL; - dlg.title.atr = A_BOLD; - dlg.border.atr = A_NORMAL; - dlg.button_active.atr = A_REVERSE; - dlg.button_inactive.atr = A_DIM; - dlg.button_key_active.atr = A_REVERSE; - dlg.button_key_inactive.atr = A_BOLD; - dlg.button_label_active.atr = A_REVERSE; - dlg.button_label_inactive.atr = A_NORMAL; - dlg.inputbox.atr = A_NORMAL; - dlg.inputbox_border.atr = A_NORMAL; - dlg.searchbox.atr = A_NORMAL; - dlg.searchbox_title.atr = A_BOLD; - dlg.searchbox_border.atr = A_NORMAL; - dlg.position_indicator.atr = A_BOLD; - dlg.menubox.atr = A_NORMAL; - dlg.menubox_border.atr = A_NORMAL; - dlg.item.atr = A_NORMAL; - dlg.item_selected.atr = A_REVERSE; - dlg.tag.atr = A_BOLD; - dlg.tag_selected.atr = A_REVERSE; - dlg.tag_key.atr = A_BOLD; - dlg.tag_key_selected.atr = A_REVERSE; - dlg.check.atr = A_BOLD; - dlg.check_selected.atr = A_REVERSE; - dlg.uarrow.atr = A_BOLD; - dlg.darrow.atr = A_BOLD; -} - -#define DLG_COLOR(dialog, f, b, h) \ -do { \ - dlg.dialog.fg = (f); \ - dlg.dialog.bg = (b); \ - dlg.dialog.hl = (h); \ -} while (0) - -static void set_classic_theme(void) -{ - DLG_COLOR(screen, COLOR_CYAN, COLOR_BLUE, true); - DLG_COLOR(shadow, COLOR_BLACK, COLOR_BLACK, true); - DLG_COLOR(dialog, COLOR_BLACK, COLOR_WHITE, false); - DLG_COLOR(title, COLOR_YELLOW, COLOR_WHITE, true); - DLG_COLOR(border, COLOR_WHITE, COLOR_WHITE, true); - DLG_COLOR(button_active, COLOR_WHITE, COLOR_BLUE, true); - DLG_COLOR(button_inactive, COLOR_BLACK, COLOR_WHITE, false); - DLG_COLOR(button_key_active, COLOR_WHITE, COLOR_BLUE, true); - DLG_COLOR(button_key_inactive, COLOR_RED, COLOR_WHITE, false); - DLG_COLOR(button_label_active, COLOR_YELLOW, COLOR_BLUE, true); - DLG_COLOR(button_label_inactive, COLOR_BLACK, COLOR_WHITE, true); - DLG_COLOR(inputbox, COLOR_BLACK, COLOR_WHITE, false); - DLG_COLOR(inputbox_border, COLOR_BLACK, COLOR_WHITE, false); - DLG_COLOR(searchbox, COLOR_BLACK, COLOR_WHITE, false); - DLG_COLOR(searchbox_title, COLOR_YELLOW, COLOR_WHITE, true); - DLG_COLOR(searchbox_border, COLOR_WHITE, COLOR_WHITE, true); - DLG_COLOR(position_indicator, COLOR_YELLOW, COLOR_WHITE, true); - DLG_COLOR(menubox, COLOR_BLACK, COLOR_WHITE, false); - DLG_COLOR(menubox_border, COLOR_WHITE, COLOR_WHITE, true); - DLG_COLOR(item, COLOR_BLACK, COLOR_WHITE, false); - DLG_COLOR(item_selected, COLOR_WHITE, COLOR_BLUE, true); - DLG_COLOR(tag, COLOR_YELLOW, COLOR_WHITE, true); - DLG_COLOR(tag_selected, COLOR_YELLOW, COLOR_BLUE, true); - DLG_COLOR(tag_key, COLOR_YELLOW, COLOR_WHITE, true); - DLG_COLOR(tag_key_selected, COLOR_YELLOW, COLOR_BLUE, true); - DLG_COLOR(check, COLOR_BLACK, COLOR_WHITE, false); - DLG_COLOR(check_selected, COLOR_WHITE, COLOR_BLUE, true); - DLG_COLOR(uarrow, COLOR_GREEN, COLOR_WHITE, true); - DLG_COLOR(darrow, COLOR_GREEN, COLOR_WHITE, true); -} - -static void set_blackbg_theme(void) -{ - DLG_COLOR(screen, COLOR_RED, COLOR_BLACK, true); - DLG_COLOR(shadow, COLOR_BLACK, COLOR_BLACK, false); - DLG_COLOR(dialog, COLOR_WHITE, COLOR_BLACK, false); - DLG_COLOR(title, COLOR_RED, COLOR_BLACK, false); - DLG_COLOR(border, COLOR_BLACK, COLOR_BLACK, true); - - DLG_COLOR(button_active, COLOR_YELLOW, COLOR_RED, false); - DLG_COLOR(button_inactive, COLOR_YELLOW, COLOR_BLACK, false); - DLG_COLOR(button_key_active, COLOR_YELLOW, COLOR_RED, true); - DLG_COLOR(button_key_inactive, COLOR_RED, COLOR_BLACK, false); - DLG_COLOR(button_label_active, COLOR_WHITE, COLOR_RED, false); - DLG_COLOR(button_label_inactive, COLOR_BLACK, COLOR_BLACK, true); - - DLG_COLOR(inputbox, COLOR_YELLOW, COLOR_BLACK, false); - DLG_COLOR(inputbox_border, COLOR_YELLOW, COLOR_BLACK, false); - - DLG_COLOR(searchbox, COLOR_YELLOW, COLOR_BLACK, false); - DLG_COLOR(searchbox_title, COLOR_YELLOW, COLOR_BLACK, true); - DLG_COLOR(searchbox_border, COLOR_BLACK, COLOR_BLACK, true); - - DLG_COLOR(position_indicator, COLOR_RED, COLOR_BLACK, false); - - DLG_COLOR(menubox, COLOR_YELLOW, COLOR_BLACK, false); - DLG_COLOR(menubox_border, COLOR_BLACK, COLOR_BLACK, true); - - DLG_COLOR(item, COLOR_WHITE, COLOR_BLACK, false); - DLG_COLOR(item_selected, COLOR_WHITE, COLOR_RED, false); - - DLG_COLOR(tag, COLOR_RED, COLOR_BLACK, false); - DLG_COLOR(tag_selected, COLOR_YELLOW, COLOR_RED, true); - DLG_COLOR(tag_key, COLOR_RED, COLOR_BLACK, false); - DLG_COLOR(tag_key_selected, COLOR_YELLOW, COLOR_RED, true); - - DLG_COLOR(check, COLOR_YELLOW, COLOR_BLACK, false); - DLG_COLOR(check_selected, COLOR_YELLOW, COLOR_RED, true); - - DLG_COLOR(uarrow, COLOR_RED, COLOR_BLACK, false); - DLG_COLOR(darrow, COLOR_RED, COLOR_BLACK, false); -} - -static void set_bluetitle_theme(void) -{ - set_classic_theme(); - DLG_COLOR(title, COLOR_BLUE, COLOR_WHITE, true); - DLG_COLOR(button_key_active, COLOR_YELLOW, COLOR_BLUE, true); - DLG_COLOR(button_label_active, COLOR_WHITE, COLOR_BLUE, true); - DLG_COLOR(searchbox_title, COLOR_BLUE, COLOR_WHITE, true); - DLG_COLOR(position_indicator, COLOR_BLUE, COLOR_WHITE, true); - DLG_COLOR(tag, COLOR_BLUE, COLOR_WHITE, true); - DLG_COLOR(tag_key, COLOR_BLUE, COLOR_WHITE, true); - -} - -/* - * Select color theme - */ -static int set_theme(const char *theme) -{ - int use_color = 1; - if (!theme) - set_bluetitle_theme(); - else if (strcmp(theme, "classic") == 0) - set_classic_theme(); - else if (strcmp(theme, "bluetitle") == 0) - set_bluetitle_theme(); - else if (strcmp(theme, "blackbg") == 0) - set_blackbg_theme(); - else if (strcmp(theme, "mono") == 0) - use_color = 0; - - return use_color; -} - -static void init_one_color(struct dialog_color *color) -{ - static int pair = 0; - - pair++; - init_pair(pair, color->fg, color->bg); - if (color->hl) - color->atr = A_BOLD | COLOR_PAIR(pair); - else - color->atr = COLOR_PAIR(pair); -} - -static void init_dialog_colors(void) -{ - init_one_color(&dlg.screen); - init_one_color(&dlg.shadow); - init_one_color(&dlg.dialog); - init_one_color(&dlg.title); - init_one_color(&dlg.border); - init_one_color(&dlg.button_active); - init_one_color(&dlg.button_inactive); - init_one_color(&dlg.button_key_active); - init_one_color(&dlg.button_key_inactive); - init_one_color(&dlg.button_label_active); - init_one_color(&dlg.button_label_inactive); - init_one_color(&dlg.inputbox); - init_one_color(&dlg.inputbox_border); - init_one_color(&dlg.searchbox); - init_one_color(&dlg.searchbox_title); - init_one_color(&dlg.searchbox_border); - init_one_color(&dlg.position_indicator); - init_one_color(&dlg.menubox); - init_one_color(&dlg.menubox_border); - init_one_color(&dlg.item); - init_one_color(&dlg.item_selected); - init_one_color(&dlg.tag); - init_one_color(&dlg.tag_selected); - init_one_color(&dlg.tag_key); - init_one_color(&dlg.tag_key_selected); - init_one_color(&dlg.check); - init_one_color(&dlg.check_selected); - init_one_color(&dlg.uarrow); - init_one_color(&dlg.darrow); -} - -/* - * Setup for color display - */ -static void color_setup(const char *theme) -{ - int use_color; - - use_color = set_theme(theme); - if (use_color && has_colors()) { - start_color(); - init_dialog_colors(); - } else - set_mono_theme(); -} - -/* - * Set window to attribute 'attr' - */ -void attr_clear(WINDOW * win, int height, int width, chtype attr) -{ - int i, j; - - wattrset(win, attr); - for (i = 0; i < height; i++) { - wmove(win, i, 0); - for (j = 0; j < width; j++) - waddch(win, ' '); - } - touchwin(win); -} - -void dialog_clear(void) -{ - int lines, columns; - - lines = getmaxy(stdscr); - columns = getmaxx(stdscr); - - attr_clear(stdscr, lines, columns, dlg.screen.atr); - /* Display background title if it exists ... - SLH */ - if (dlg.backtitle != NULL) { - int i, len = 0, skip = 0; - struct subtitle_list *pos; - - wattrset(stdscr, dlg.screen.atr); - mvwaddstr(stdscr, 0, 1, (char *)dlg.backtitle); - - for (pos = dlg.subtitles; pos != NULL; pos = pos->next) { - /* 3 is for the arrow and spaces */ - len += strlen(pos->text) + 3; - } - - wmove(stdscr, 1, 1); - if (len > columns - 2) { - const char *ellipsis = "[...] "; - waddstr(stdscr, ellipsis); - skip = len - (columns - 2 - strlen(ellipsis)); - } - - for (pos = dlg.subtitles; pos != NULL; pos = pos->next) { - if (skip == 0) - waddch(stdscr, ACS_RARROW); - else - skip--; - - if (skip == 0) - waddch(stdscr, ' '); - else - skip--; - - if (skip < strlen(pos->text)) { - waddstr(stdscr, pos->text + skip); - skip = 0; - } else - skip -= strlen(pos->text); - - if (skip == 0) - waddch(stdscr, ' '); - else - skip--; - } - - for (i = len + 1; i < columns - 1; i++) - waddch(stdscr, ACS_HLINE); - } - wnoutrefresh(stdscr); -} - -/* - * Do some initialization for dialog - */ -int init_dialog(const char *backtitle) -{ - int height, width; - - initscr(); /* Init curses */ - - /* Get current cursor position for signal handler in mconf.c */ - getyx(stdscr, saved_y, saved_x); - - getmaxyx(stdscr, height, width); - if (height < WINDOW_HEIGTH_MIN || width < WINDOW_WIDTH_MIN) { - endwin(); - return -ERRDISPLAYTOOSMALL; - } - - dlg.backtitle = backtitle; - color_setup(getenv("MENUCONFIG_COLOR")); - - keypad(stdscr, TRUE); - cbreak(); - noecho(); - dialog_clear(); - - return 0; -} - -void set_dialog_backtitle(const char *backtitle) -{ - dlg.backtitle = backtitle; -} - -void set_dialog_subtitles(struct subtitle_list *subtitles) -{ - dlg.subtitles = subtitles; -} - -/* - * End using dialog functions. - */ -void end_dialog(int x, int y) -{ - /* move cursor back to original position */ - move(y, x); - refresh(); - endwin(); -} - -/* Print the title of the dialog. Center the title and truncate - * tile if wider than dialog (- 2 chars). - **/ -void print_title(WINDOW *dialog, const char *title, int width) -{ - if (title) { - int tlen = MIN(width - 2, strlen(title)); - wattrset(dialog, dlg.title.atr); - mvwaddch(dialog, 0, (width - tlen) / 2 - 1, ' '); - mvwaddnstr(dialog, 0, (width - tlen)/2, title, tlen); - waddch(dialog, ' '); - } -} - -/* - * Print a string of text in a window, automatically wrap around to the - * next line if the string is too long to fit on one line. Newline - * characters '\n' are properly processed. We start on a new line - * if there is no room for at least 4 nonblanks following a double-space. - */ -void print_autowrap(WINDOW * win, const char *prompt, int width, int y, int x) -{ - int newl, cur_x, cur_y; - int prompt_len, room, wlen; - char tempstr[MAX_LEN + 1], *word, *sp, *sp2, *newline_separator = 0; - - strcpy(tempstr, prompt); - - prompt_len = strlen(tempstr); - - if (prompt_len <= width - x * 2) { /* If prompt is short */ - wmove(win, y, (width - prompt_len) / 2); - waddstr(win, tempstr); - } else { - cur_x = x; - cur_y = y; - newl = 1; - word = tempstr; - while (word && *word) { - sp = strpbrk(word, "\n "); - if (sp && *sp == '\n') - newline_separator = sp; - - if (sp) - *sp++ = 0; - - /* Wrap to next line if either the word does not fit, - or it is the first word of a new sentence, and it is - short, and the next word does not fit. */ - room = width - cur_x; - wlen = strlen(word); - if (wlen > room || - (newl && wlen < 4 && sp - && wlen + 1 + strlen(sp) > room - && (!(sp2 = strpbrk(sp, "\n ")) - || wlen + 1 + (sp2 - sp) > room))) { - cur_y++; - cur_x = x; - } - wmove(win, cur_y, cur_x); - waddstr(win, word); - getyx(win, cur_y, cur_x); - - /* Move to the next line if the word separator was a newline */ - if (newline_separator) { - cur_y++; - cur_x = x; - newline_separator = 0; - } else - cur_x++; - - if (sp && *sp == ' ') { - cur_x++; /* double space */ - while (*++sp == ' ') ; - newl = 1; - } else - newl = 0; - word = sp; - } - } -} - -/* - * Print a button - */ -void print_button(WINDOW * win, const char *label, int y, int x, int selected) -{ - int i, temp; - - wmove(win, y, x); - wattrset(win, selected ? dlg.button_active.atr - : dlg.button_inactive.atr); - waddstr(win, "<"); - temp = strspn(label, " "); - label += temp; - wattrset(win, selected ? dlg.button_label_active.atr - : dlg.button_label_inactive.atr); - for (i = 0; i < temp; i++) - waddch(win, ' '); - wattrset(win, selected ? dlg.button_key_active.atr - : dlg.button_key_inactive.atr); - waddch(win, label[0]); - wattrset(win, selected ? dlg.button_label_active.atr - : dlg.button_label_inactive.atr); - waddstr(win, (char *)label + 1); - wattrset(win, selected ? dlg.button_active.atr - : dlg.button_inactive.atr); - waddstr(win, ">"); - wmove(win, y, x + temp + 1); -} - -/* - * Draw a rectangular box with line drawing characters - */ -void -draw_box(WINDOW * win, int y, int x, int height, int width, - chtype box, chtype border) -{ - int i, j; - - wattrset(win, 0); - for (i = 0; i < height; i++) { - wmove(win, y + i, x); - for (j = 0; j < width; j++) - if (!i && !j) - waddch(win, border | ACS_ULCORNER); - else if (i == height - 1 && !j) - waddch(win, border | ACS_LLCORNER); - else if (!i && j == width - 1) - waddch(win, box | ACS_URCORNER); - else if (i == height - 1 && j == width - 1) - waddch(win, box | ACS_LRCORNER); - else if (!i) - waddch(win, border | ACS_HLINE); - else if (i == height - 1) - waddch(win, box | ACS_HLINE); - else if (!j) - waddch(win, border | ACS_VLINE); - else if (j == width - 1) - waddch(win, box | ACS_VLINE); - else - waddch(win, box | ' '); - } -} - -/* - * Draw shadows along the right and bottom edge to give a more 3D look - * to the boxes - */ -void draw_shadow(WINDOW * win, int y, int x, int height, int width) -{ - int i; - - if (has_colors()) { /* Whether terminal supports color? */ - wattrset(win, dlg.shadow.atr); - wmove(win, y + height, x + 2); - for (i = 0; i < width; i++) - waddch(win, winch(win) & A_CHARTEXT); - for (i = y + 1; i < y + height + 1; i++) { - wmove(win, i, x + width); - waddch(win, winch(win) & A_CHARTEXT); - waddch(win, winch(win) & A_CHARTEXT); - } - wnoutrefresh(win); - } -} - -/* - * Return the position of the first alphabetic character in a string. - */ -int first_alpha(const char *string, const char *exempt) -{ - int i, in_paren = 0, c; - - for (i = 0; i < strlen(string); i++) { - c = tolower(string[i]); - - if (strchr("<[(", c)) - ++in_paren; - if (strchr(">])", c) && in_paren > 0) - --in_paren; - - if ((!in_paren) && isalpha(c) && strchr(exempt, c) == 0) - return i; - } - - return 0; -} - -/* - * ncurses uses ESC to detect escaped char sequences. This resutl in - * a small timeout before ESC is actually delivered to the application. - * lxdialog suggest <ESC> <ESC> which is correctly translated to two - * times esc. But then we need to ignore the second esc to avoid stepping - * out one menu too much. Filter away all escaped key sequences since - * keypad(FALSE) turn off ncurses support for escape sequences - and thats - * needed to make notimeout() do as expected. - */ -int on_key_esc(WINDOW *win) -{ - int key; - int key2; - int key3; - - nodelay(win, TRUE); - keypad(win, FALSE); - key = wgetch(win); - key2 = wgetch(win); - do { - key3 = wgetch(win); - } while (key3 != ERR); - nodelay(win, FALSE); - keypad(win, TRUE); - if (key == KEY_ESC && key2 == ERR) - return KEY_ESC; - else if (key != ERR && key != KEY_ESC && key2 == ERR) - ungetch(key); - - return -1; -} - -/* redraw screen in new size */ -int on_key_resize(void) -{ - dialog_clear(); - return KEY_RESIZE; -} - -struct dialog_list *item_cur; -struct dialog_list item_nil; -struct dialog_list *item_head; - -void item_reset(void) -{ - struct dialog_list *p, *next; - - for (p = item_head; p; p = next) { - next = p->next; - free(p); - } - item_head = NULL; - item_cur = &item_nil; -} - -void item_make(const char *fmt, ...) -{ - va_list ap; - struct dialog_list *p = malloc(sizeof(*p)); - - if (item_head) - item_cur->next = p; - else - item_head = p; - item_cur = p; - memset(p, 0, sizeof(*p)); - - va_start(ap, fmt); - vsnprintf(item_cur->node.str, sizeof(item_cur->node.str), fmt, ap); - va_end(ap); -} - -void item_add_str(const char *fmt, ...) -{ - va_list ap; - size_t avail; - - avail = sizeof(item_cur->node.str) - strlen(item_cur->node.str); - - va_start(ap, fmt); - vsnprintf(item_cur->node.str + strlen(item_cur->node.str), - avail, fmt, ap); - item_cur->node.str[sizeof(item_cur->node.str) - 1] = '\0'; - va_end(ap); -} - -void item_set_tag(char tag) -{ - item_cur->node.tag = tag; -} -void item_set_data(void *ptr) -{ - item_cur->node.data = ptr; -} - -void item_set_selected(int val) -{ - item_cur->node.selected = val; -} - -int item_activate_selected(void) -{ - item_foreach() - if (item_is_selected()) - return 1; - return 0; -} - -void *item_data(void) -{ - return item_cur->node.data; -} - -char item_tag(void) -{ - return item_cur->node.tag; -} - -int item_count(void) -{ - int n = 0; - struct dialog_list *p; - - for (p = item_head; p; p = p->next) - n++; - return n; -} - -void item_set(int n) -{ - int i = 0; - item_foreach() - if (i++ == n) - return; -} - -int item_n(void) -{ - int n = 0; - struct dialog_list *p; - - for (p = item_head; p; p = p->next) { - if (p == item_cur) - return n; - n++; - } - return 0; -} - -const char *item_str(void) -{ - return item_cur->node.str; -} - -int item_is_selected(void) -{ - return (item_cur->node.selected != 0); -} - -int item_is_tag(char tag) -{ - return (item_cur->node.tag == tag); -} diff --git a/payloads/external/SeaBIOS/scripts/kconfig/lxdialog/yesno.c b/payloads/external/SeaBIOS/scripts/kconfig/lxdialog/yesno.c deleted file mode 100644 index 676fb2f8..00000000 --- a/payloads/external/SeaBIOS/scripts/kconfig/lxdialog/yesno.c +++ /dev/null @@ -1,114 +0,0 @@ -/* - * yesno.c -- implements the yes/no box - * - * ORIGINAL AUTHOR: Savio Lam (lam836@cs.cuhk.hk) - * MODIFIED FOR LINUX KERNEL CONFIG BY: William Roadcap (roadcap@cfw.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include "dialog.h" - -/* - * Display termination buttons - */ -static void print_buttons(WINDOW * dialog, int height, int width, int selected) -{ - int x = width / 2 - 10; - int y = height - 2; - - print_button(dialog, gettext(" Yes "), y, x, selected == 0); - print_button(dialog, gettext(" No "), y, x + 13, selected == 1); - - wmove(dialog, y, x + 1 + 13 * selected); - wrefresh(dialog); -} - -/* - * Display a dialog box with two buttons - Yes and No - */ -int dialog_yesno(const char *title, const char *prompt, int height, int width) -{ - int i, x, y, key = 0, button = 0; - WINDOW *dialog; - -do_resize: - if (getmaxy(stdscr) < (height + YESNO_HEIGTH_MIN)) - return -ERRDISPLAYTOOSMALL; - if (getmaxx(stdscr) < (width + YESNO_WIDTH_MIN)) - return -ERRDISPLAYTOOSMALL; - - /* center dialog box on screen */ - x = (getmaxx(stdscr) - width) / 2; - y = (getmaxy(stdscr) - height) / 2; - - draw_shadow(stdscr, y, x, height, width); - - dialog = newwin(height, width, y, x); - keypad(dialog, TRUE); - - draw_box(dialog, 0, 0, height, width, - dlg.dialog.atr, dlg.border.atr); - wattrset(dialog, dlg.border.atr); - mvwaddch(dialog, height - 3, 0, ACS_LTEE); - for (i = 0; i < width - 2; i++) - waddch(dialog, ACS_HLINE); - wattrset(dialog, dlg.dialog.atr); - waddch(dialog, ACS_RTEE); - - print_title(dialog, title, width); - - wattrset(dialog, dlg.dialog.atr); - print_autowrap(dialog, prompt, width - 2, 1, 3); - - print_buttons(dialog, height, width, 0); - - while (key != KEY_ESC) { - key = wgetch(dialog); - switch (key) { - case 'Y': - case 'y': - delwin(dialog); - return 0; - case 'N': - case 'n': - delwin(dialog); - return 1; - - case TAB: - case KEY_LEFT: - case KEY_RIGHT: - button = ((key == KEY_LEFT ? --button : ++button) < 0) ? 1 : (button > 1 ? 0 : button); - - print_buttons(dialog, height, width, button); - wrefresh(dialog); - break; - case ' ': - case '\n': - delwin(dialog); - return button; - case KEY_ESC: - key = on_key_esc(dialog); - break; - case KEY_RESIZE: - delwin(dialog); - on_key_resize(); - goto do_resize; - } - } - - delwin(dialog); - return key; /* ESC pressed */ -} diff --git a/payloads/external/SeaBIOS/scripts/kconfig/mconf.c b/payloads/external/SeaBIOS/scripts/kconfig/mconf.c deleted file mode 100644 index 14cea746..00000000 --- a/payloads/external/SeaBIOS/scripts/kconfig/mconf.c +++ /dev/null @@ -1,1036 +0,0 @@ -/* - * Copyright (C) 2002 Roman Zippel <zippel@linux-m68k.org> - * Released under the terms of the GNU GPL v2.0. - * - * Introduced single menu mode (show all sub-menus in one large tree). - * 2002-11-06 Petr Baudis <pasky@ucw.cz> - * - * i18n, 2005, Arnaldo Carvalho de Melo <acme@conectiva.com.br> - */ - -#include <ctype.h> -#include <errno.h> -#include <fcntl.h> -#include <limits.h> -#include <stdarg.h> -#include <stdlib.h> -#include <string.h> -#include <signal.h> -#include <unistd.h> -#include <locale.h> - -#include "lkc.h" -#include "lxdialog/dialog.h" - -static const char mconf_readme[] = N_( -"Overview\n" -"--------\n" -"This interface lets you select features and parameters for the build.\n" -"Features can either be built-in, modularized, or ignored. Parameters\n" -"must be entered in as decimal or hexadecimal numbers or text.\n" -"\n" -"Menu items beginning with following braces represent features that\n" -" [ ] can be built in or removed\n" -" < > can be built in, modularized or removed\n" -" { } can be built in or modularized (selected by other feature)\n" -" - - are selected by other feature,\n" -"while *, M or whitespace inside braces means to build in, build as\n" -"a module or to exclude the feature respectively.\n" -"\n" -"To change any of these features, highlight it with the cursor\n" -"keys and press <Y> to build it in, <M> to make it a module or\n" -"<N> to remove it. You may also press the <Space Bar> to cycle\n" -"through the available options (i.e. Y->N->M->Y).\n" -"\n" -"Some additional keyboard hints:\n" -"\n" -"Menus\n" -"----------\n" -"o Use the Up/Down arrow keys (cursor keys) to highlight the item you\n" -" wish to change or the submenu you wish to select and press <Enter>.\n" -" Submenus are designated by \"--->\", empty ones by \"----\".\n" -"\n" -" Shortcut: Press the option's highlighted letter (hotkey).\n" -" Pressing a hotkey more than once will sequence\n" -" through all visible items which use that hotkey.\n" -"\n" -" You may also use the <PAGE UP> and <PAGE DOWN> keys to scroll\n" -" unseen options into view.\n" -"\n" -"o To exit a menu use the cursor keys to highlight the <Exit> button\n" -" and press <ENTER>.\n" -"\n" -" Shortcut: Press <ESC><ESC> or <E> or <X> if there is no hotkey\n" -" using those letters. You may press a single <ESC>, but\n" -" there is a delayed response which you may find annoying.\n" -"\n" -" Also, the <TAB> and cursor keys will cycle between <Select>,\n" -" <Exit>, <Help>, <Save>, and <Load>.\n" -"\n" -"o To get help with an item, use the cursor keys to highlight <Help>\n" -" and press <ENTER>.\n" -"\n" -" Shortcut: Press <H> or <?>.\n" -"\n" -"o To toggle the display of hidden options, press <Z>.\n" -"\n" -"\n" -"Radiolists (Choice lists)\n" -"-----------\n" -"o Use the cursor keys to select the option you wish to set and press\n" -" <S> or the <SPACE BAR>.\n" -"\n" -" Shortcut: Press the first letter of the option you wish to set then\n" -" press <S> or <SPACE BAR>.\n" -"\n" -"o To see available help for the item, use the cursor keys to highlight\n" -" <Help> and Press <ENTER>.\n" -"\n" -" Shortcut: Press <H> or <?>.\n" -"\n" -" Also, the <TAB> and cursor keys will cycle between <Select> and\n" -" <Help>\n" -"\n" -"\n" -"Data Entry\n" -"-----------\n" -"o Enter the requested information and press <ENTER>\n" -" If you are entering hexadecimal values, it is not necessary to\n" -" add the '0x' prefix to the entry.\n" -"\n" -"o For help, use the <TAB> or cursor keys to highlight the help option\n" -" and press <ENTER>. You can try <TAB><H> as well.\n" -"\n" -"\n" -"Text Box (Help Window)\n" -"--------\n" -"o Use the cursor keys to scroll up/down/left/right. The VI editor\n" -" keys h,j,k,l function here as do <u>, <d>, <SPACE BAR> and <B> for\n" -" those who are familiar with less and lynx.\n" -"\n" -"o Press <E>, <X>, <q>, <Enter> or <Esc><Esc> to exit.\n" -"\n" -"\n" -"Alternate Configuration Files\n" -"-----------------------------\n" -"Menuconfig supports the use of alternate configuration files for\n" -"those who, for various reasons, find it necessary to switch\n" -"between different configurations.\n" -"\n" -"The <Save> button will let you save the current configuration to\n" -"a file of your choosing. Use the <Load> button to load a previously\n" -"saved alternate configuration.\n" -"\n" -"Even if you don't use alternate configuration files, but you find\n" -"during a Menuconfig session that you have completely messed up your\n" -"settings, you may use the <Load> button to restore your previously\n" -"saved settings from \".config\" without restarting Menuconfig.\n" -"\n" -"Other information\n" -"-----------------\n" -"If you use Menuconfig in an XTERM window, make sure you have your\n" -"$TERM variable set to point to an xterm definition which supports\n" -"color. Otherwise, Menuconfig will look rather bad. Menuconfig will\n" -"not display correctly in an RXVT window because rxvt displays only one\n" -"intensity of color, bright.\n" -"\n" -"Menuconfig will display larger menus on screens or xterms which are\n" -"set to display more than the standard 25 row by 80 column geometry.\n" -"In order for this to work, the \"stty size\" command must be able to\n" -"display the screen's current row and column geometry. I STRONGLY\n" -"RECOMMEND that you make sure you do NOT have the shell variables\n" -"LINES and COLUMNS exported into your environment. Some distributions\n" -"export those variables via /etc/profile. Some ncurses programs can\n" -"become confused when those variables (LINES & COLUMNS) don't reflect\n" -"the true screen size.\n" -"\n" -"Optional personality available\n" -"------------------------------\n" -"If you prefer to have all of the options listed in a single menu,\n" -"rather than the default multimenu hierarchy, run the menuconfig with\n" -"MENUCONFIG_MODE environment variable set to single_menu. Example:\n" -"\n" -"make MENUCONFIG_MODE=single_menu menuconfig\n" -"\n" -"<Enter> will then unroll the appropriate category, or enfold it if it\n" -"is already unrolled.\n" -"\n" -"Note that this mode can eventually be a little more CPU expensive\n" -"(especially with a larger number of unrolled categories) than the\n" -"default mode.\n" -"\n" -"Different color themes available\n" -"--------------------------------\n" -"It is possible to select different color themes using the variable\n" -"MENUCONFIG_COLOR. To select a theme use:\n" -"\n" -"make MENUCONFIG_COLOR=<theme> menuconfig\n" -"\n" -"Available themes are\n" -" mono => selects colors suitable for monochrome displays\n" -" blackbg => selects a color scheme with black background\n" -" classic => theme with blue background. The classic look\n" -" bluetitle => an LCD friendly version of classic. (default)\n" -"\n"), -menu_instructions[] = N_( - "Arrow keys navigate the menu. " - "<Enter> selects submenus ---> (or empty submenus ----). " - "Highlighted letters are hotkeys. " - "Pressing <Y> includes, <N> excludes, <M> modularizes features. " - "Press <Esc><Esc> to exit, <?> for Help, </> for Search. " - "Legend: [*] built-in [ ] excluded <M> module < > module capable"), -radiolist_instructions[] = N_( - "Use the arrow keys to navigate this window or " - "press the hotkey of the item you wish to select " - "followed by the <SPACE BAR>. " - "Press <?> for additional information about this option."), -inputbox_instructions_int[] = N_( - "Please enter a decimal value. " - "Fractions will not be accepted. " - "Use the <TAB> key to move from the input field to the buttons below it."), -inputbox_instructions_hex[] = N_( - "Please enter a hexadecimal value. " - "Use the <TAB> key to move from the input field to the buttons below it."), -inputbox_instructions_string[] = N_( - "Please enter a string value. " - "Use the <TAB> key to move from the input field to the buttons below it."), -setmod_text[] = N_( - "This feature depends on another which has been configured as a module.\n" - "As a result, this feature will be built as a module."), -load_config_text[] = N_( - "Enter the name of the configuration file you wish to load. " - "Accept the name shown to restore the configuration you " - "last retrieved. Leave blank to abort."), -load_config_help[] = N_( - "\n" - "For various reasons, one may wish to keep several different\n" - "configurations available on a single machine.\n" - "\n" - "If you have saved a previous configuration in a file other than the\n" - "default one, entering its name here will allow you to modify that\n" - "configuration.\n" - "\n" - "If you are uncertain, then you have probably never used alternate\n" - "configuration files. You should therefore leave this blank to abort.\n"), -save_config_text[] = N_( - "Enter a filename to which this configuration should be saved " - "as an alternate. Leave blank to abort."), -save_config_help[] = N_( - "\n" - "For various reasons, one may wish to keep different configurations\n" - "available on a single machine.\n" - "\n" - "Entering a file name here will allow you to later retrieve, modify\n" - "and use the current configuration as an alternate to whatever\n" - "configuration options you have selected at that time.\n" - "\n" - "If you are uncertain what all this means then you should probably\n" - "leave this blank.\n"), -search_help[] = N_( - "\n" - "Search for symbols and display their relations.\n" - "Regular expressions are allowed.\n" - "Example: search for \"^FOO\"\n" - "Result:\n" - "-----------------------------------------------------------------\n" - "Symbol: FOO [=m]\n" - "Type : tristate\n" - "Prompt: Foo bus is used to drive the bar HW\n" - " Location:\n" - " -> Bus options (PCI, PCMCIA, EISA, ISA)\n" - " -> PCI support (PCI [=y])\n" - "(1) -> PCI access mode (<choice> [=y])\n" - " Defined at drivers/pci/Kconfig:47\n" - " Depends on: X86_LOCAL_APIC && X86_IO_APIC || IA64\n" - " Selects: LIBCRC32\n" - " Selected by: BAR [=n]\n" - "-----------------------------------------------------------------\n" - "o The line 'Type:' shows the type of the configuration option for\n" - " this symbol (boolean, tristate, string, ...)\n" - "o The line 'Prompt:' shows the text used in the menu structure for\n" - " this symbol\n" - "o The 'Defined at' line tells at what file / line number the symbol\n" - " is defined\n" - "o The 'Depends on:' line tells what symbols need to be defined for\n" - " this symbol to be visible in the menu (selectable)\n" - "o The 'Location:' lines tells where in the menu structure this symbol\n" - " is located\n" - " A location followed by a [=y] indicates that this is a\n" - " selectable menu item - and the current value is displayed inside\n" - " brackets.\n" - " Press the key in the (#) prefix to jump directly to that\n" - " location. You will be returned to the current search results\n" - " after exiting this new menu.\n" - "o The 'Selects:' line tells what symbols will be automatically\n" - " selected if this symbol is selected (y or m)\n" - "o The 'Selected by' line tells what symbol has selected this symbol\n" - "\n" - "Only relevant lines are shown.\n" - "\n\n" - "Search examples:\n" - "Examples: USB => find all symbols containing USB\n" - " ^USB => find all symbols starting with USB\n" - " USB$ => find all symbols ending with USB\n" - "\n"); - -static int indent; -static struct menu *current_menu; -static int child_count; -static int single_menu_mode; -static int show_all_options; -static int save_and_exit; - -static void conf(struct menu *menu, struct menu *active_menu); -static void conf_choice(struct menu *menu); -static void conf_string(struct menu *menu); -static void conf_load(void); -static void conf_save(void); -static int show_textbox_ext(const char *title, char *text, int r, int c, - int *keys, int *vscroll, int *hscroll, - update_text_fn update_text, void *data); -static void show_textbox(const char *title, const char *text, int r, int c); -static void show_helptext(const char *title, const char *text); -static void show_help(struct menu *menu); - -static char filename[PATH_MAX+1]; -static void set_config_filename(const char *config_filename) -{ - static char menu_backtitle[PATH_MAX+128]; - int size; - - size = snprintf(menu_backtitle, sizeof(menu_backtitle), - "%s - %s", config_filename, rootmenu.prompt->text); - if (size >= sizeof(menu_backtitle)) - menu_backtitle[sizeof(menu_backtitle)-1] = '\0'; - set_dialog_backtitle(menu_backtitle); - - size = snprintf(filename, sizeof(filename), "%s", config_filename); - if (size >= sizeof(filename)) - filename[sizeof(filename)-1] = '\0'; -} - -struct subtitle_part { - struct list_head entries; - const char *text; -}; -static LIST_HEAD(trail); - -static struct subtitle_list *subtitles; -static void set_subtitle(void) -{ - struct subtitle_part *sp; - struct subtitle_list *pos, *tmp; - - for (pos = subtitles; pos != NULL; pos = tmp) { - tmp = pos->next; - free(pos); - } - - subtitles = NULL; - list_for_each_entry(sp, &trail, entries) { - if (sp->text) { - if (pos) { - pos->next = xcalloc(sizeof(*pos), 1); - pos = pos->next; - } else { - subtitles = pos = xcalloc(sizeof(*pos), 1); - } - pos->text = sp->text; - } - } - - set_dialog_subtitles(subtitles); -} - -static void reset_subtitle(void) -{ - struct subtitle_list *pos, *tmp; - - for (pos = subtitles; pos != NULL; pos = tmp) { - tmp = pos->next; - free(pos); - } - subtitles = NULL; - set_dialog_subtitles(subtitles); -} - -struct search_data { - struct list_head *head; - struct menu **targets; - int *keys; -}; - -static void update_text(char *buf, size_t start, size_t end, void *_data) -{ - struct search_data *data = _data; - struct jump_key *pos; - int k = 0; - - list_for_each_entry(pos, data->head, entries) { - if (pos->offset >= start && pos->offset < end) { - char header[4]; - - if (k < JUMP_NB) { - int key = '0' + (pos->index % JUMP_NB) + 1; - - sprintf(header, "(%c)", key); - data->keys[k] = key; - data->targets[k] = pos->target; - k++; - } else { - sprintf(header, " "); - } - - memcpy(buf + pos->offset, header, sizeof(header) - 1); - } - } - data->keys[k] = 0; -} - -static void search_conf(void) -{ - struct symbol **sym_arr; - struct gstr res; - struct gstr title; - char *dialog_input; - int dres, vscroll = 0, hscroll = 0; - bool again; - struct gstr sttext; - struct subtitle_part stpart; - - title = str_new(); - str_printf( &title, _("Enter (sub)string or regexp to search for " - "(with or without \"%s\")"), CONFIG_); - -again: - dialog_clear(); - dres = dialog_inputbox(_("Search Configuration Parameter"), - str_get(&title), - 10, 75, ""); - switch (dres) { - case 0: - break; - case 1: - show_helptext(_("Search Configuration"), search_help); - goto again; - default: - str_free(&title); - return; - } - - /* strip the prefix if necessary */ - dialog_input = dialog_input_result; - if (strncasecmp(dialog_input_result, CONFIG_, strlen(CONFIG_)) == 0) - dialog_input += strlen(CONFIG_); - - sttext = str_new(); - str_printf(&sttext, "Search (%s)", dialog_input_result); - stpart.text = str_get(&sttext); - list_add_tail(&stpart.entries, &trail); - - sym_arr = sym_re_search(dialog_input); - do { - LIST_HEAD(head); - struct menu *targets[JUMP_NB]; - int keys[JUMP_NB + 1], i; - struct search_data data = { - .head = &head, - .targets = targets, - .keys = keys, - }; - struct jump_key *pos, *tmp; - - res = get_relations_str(sym_arr, &head); - set_subtitle(); - dres = show_textbox_ext(_("Search Results"), (char *) - str_get(&res), 0, 0, keys, &vscroll, - &hscroll, &update_text, (void *) - &data); - again = false; - for (i = 0; i < JUMP_NB && keys[i]; i++) - if (dres == keys[i]) { - conf(targets[i]->parent, targets[i]); - again = true; - } - str_free(&res); - list_for_each_entry_safe(pos, tmp, &head, entries) - free(pos); - } while (again); - free(sym_arr); - str_free(&title); - list_del(trail.prev); - str_free(&sttext); -} - -static void build_conf(struct menu *menu) -{ - struct symbol *sym; - struct property *prop; - struct menu *child; - int type, tmp, doint = 2; - tristate val; - char ch; - bool visible; - - /* - * note: menu_is_visible() has side effect that it will - * recalc the value of the symbol. - */ - visible = menu_is_visible(menu); - if (show_all_options && !menu_has_prompt(menu)) - return; - else if (!show_all_options && !visible) - return; - - sym = menu->sym; - prop = menu->prompt; - if (!sym) { - if (prop && menu != current_menu) { - const char *prompt = menu_get_prompt(menu); - switch (prop->type) { - case P_MENU: - child_count++; - prompt = _(prompt); - if (single_menu_mode) { - item_make("%s%*c%s", - menu->data ? "-->" : "++>", - indent + 1, ' ', prompt); - } else - item_make(" %*c%s %s", - indent + 1, ' ', prompt, - menu_is_empty(menu) ? "----" : "--->"); - item_set_tag('m'); - item_set_data(menu); - if (single_menu_mode && menu->data) - goto conf_childs; - return; - case P_COMMENT: - if (prompt) { - child_count++; - item_make(" %*c*** %s ***", indent + 1, ' ', _(prompt)); - item_set_tag(':'); - item_set_data(menu); - } - break; - default: - if (prompt) { - child_count++; - item_make("---%*c%s", indent + 1, ' ', _(prompt)); - item_set_tag(':'); - item_set_data(menu); - } - } - } else - doint = 0; - goto conf_childs; - } - - type = sym_get_type(sym); - if (sym_is_choice(sym)) { - struct symbol *def_sym = sym_get_choice_value(sym); - struct menu *def_menu = NULL; - - child_count++; - for (child = menu->list; child; child = child->next) { - if (menu_is_visible(child) && child->sym == def_sym) - def_menu = child; - } - - val = sym_get_tristate_value(sym); - if (sym_is_changable(sym)) { - switch (type) { - case S_BOOLEAN: - item_make("[%c]", val == no ? ' ' : '*'); - break; - case S_TRISTATE: - switch (val) { - case yes: ch = '*'; break; - case mod: ch = 'M'; break; - default: ch = ' '; break; - } - item_make("<%c>", ch); - break; - } - item_set_tag('t'); - item_set_data(menu); - } else { - item_make(" "); - item_set_tag(def_menu ? 't' : ':'); - item_set_data(menu); - } - - item_add_str("%*c%s", indent + 1, ' ', _(menu_get_prompt(menu))); - if (val == yes) { - if (def_menu) { - item_add_str(" (%s)", _(menu_get_prompt(def_menu))); - item_add_str(" --->"); - if (def_menu->list) { - indent += 2; - build_conf(def_menu); - indent -= 2; - } - } - return; - } - } else { - if (menu == current_menu) { - item_make("---%*c%s", indent + 1, ' ', _(menu_get_prompt(menu))); - item_set_tag(':'); - item_set_data(menu); - goto conf_childs; - } - child_count++; - val = sym_get_tristate_value(sym); - if (sym_is_choice_value(sym) && val == yes) { - item_make(" "); - item_set_tag(':'); - item_set_data(menu); - } else { - switch (type) { - case S_BOOLEAN: - if (sym_is_changable(sym)) - item_make("[%c]", val == no ? ' ' : '*'); - else - item_make("-%c-", val == no ? ' ' : '*'); - item_set_tag('t'); - item_set_data(menu); - break; - case S_TRISTATE: - switch (val) { - case yes: ch = '*'; break; - case mod: ch = 'M'; break; - default: ch = ' '; break; - } - if (sym_is_changable(sym)) { - if (sym->rev_dep.tri == mod) - item_make("{%c}", ch); - else - item_make("<%c>", ch); - } else - item_make("-%c-", ch); - item_set_tag('t'); - item_set_data(menu); - break; - default: - tmp = 2 + strlen(sym_get_string_value(sym)); /* () = 2 */ - item_make("(%s)", sym_get_string_value(sym)); - tmp = indent - tmp + 4; - if (tmp < 0) - tmp = 0; - item_add_str("%*c%s%s", tmp, ' ', _(menu_get_prompt(menu)), - (sym_has_value(sym) || !sym_is_changable(sym)) ? - "" : _(" (NEW)")); - item_set_tag('s'); - item_set_data(menu); - goto conf_childs; - } - } - item_add_str("%*c%s%s", indent + 1, ' ', _(menu_get_prompt(menu)), - (sym_has_value(sym) || !sym_is_changable(sym)) ? - "" : _(" (NEW)")); - if (menu->prompt->type == P_MENU) { - item_add_str(" %s", menu_is_empty(menu) ? "----" : "--->"); - return; - } - } - -conf_childs: - indent += doint; - for (child = menu->list; child; child = child->next) - build_conf(child); - indent -= doint; -} - -static void conf(struct menu *menu, struct menu *active_menu) -{ - struct menu *submenu; - const char *prompt = menu_get_prompt(menu); - struct subtitle_part stpart; - struct symbol *sym; - int res; - int s_scroll = 0; - - if (menu != &rootmenu) - stpart.text = menu_get_prompt(menu); - else - stpart.text = NULL; - list_add_tail(&stpart.entries, &trail); - - while (1) { - item_reset(); - current_menu = menu; - build_conf(menu); - if (!child_count) - break; - set_subtitle(); - dialog_clear(); - res = dialog_menu(prompt ? _(prompt) : _("Main Menu"), - _(menu_instructions), - active_menu, &s_scroll); - if (res == 1 || res == KEY_ESC || res == -ERRDISPLAYTOOSMALL) - break; - if (item_count() != 0) { - if (!item_activate_selected()) - continue; - if (!item_tag()) - continue; - } - submenu = item_data(); - active_menu = item_data(); - if (submenu) - sym = submenu->sym; - else - sym = NULL; - - switch (res) { - case 0: - switch (item_tag()) { - case 'm': - if (single_menu_mode) - submenu->data = (void *) (long) !submenu->data; - else - conf(submenu, NULL); - break; - case 't': - if (sym_is_choice(sym) && sym_get_tristate_value(sym) == yes) - conf_choice(submenu); - else if (submenu->prompt->type == P_MENU) - conf(submenu, NULL); - break; - case 's': - conf_string(submenu); - break; - } - break; - case 2: - if (sym) - show_help(submenu); - else { - reset_subtitle(); - show_helptext(_("README"), _(mconf_readme)); - } - break; - case 3: - reset_subtitle(); - conf_save(); - break; - case 4: - reset_subtitle(); - conf_load(); - break; - case 5: - if (item_is_tag('t')) { - if (sym_set_tristate_value(sym, yes)) - break; - if (sym_set_tristate_value(sym, mod)) - show_textbox(NULL, setmod_text, 6, 74); - } - break; - case 6: - if (item_is_tag('t')) - sym_set_tristate_value(sym, no); - break; - case 7: - if (item_is_tag('t')) - sym_set_tristate_value(sym, mod); - break; - case 8: - if (item_is_tag('t')) - sym_toggle_tristate_value(sym); - else if (item_is_tag('m')) - conf(submenu, NULL); - break; - case 9: - search_conf(); - break; - case 10: - show_all_options = !show_all_options; - break; - } - } - - list_del(trail.prev); -} - -static int show_textbox_ext(const char *title, char *text, int r, int c, int - *keys, int *vscroll, int *hscroll, update_text_fn - update_text, void *data) -{ - dialog_clear(); - return dialog_textbox(title, text, r, c, keys, vscroll, hscroll, - update_text, data); -} - -static void show_textbox(const char *title, const char *text, int r, int c) -{ - show_textbox_ext(title, (char *) text, r, c, (int []) {0}, NULL, NULL, - NULL, NULL); -} - -static void show_helptext(const char *title, const char *text) -{ - show_textbox(title, text, 0, 0); -} - -static void conf_message_callback(const char *fmt, va_list ap) -{ - char buf[PATH_MAX+1]; - - vsnprintf(buf, sizeof(buf), fmt, ap); - if (save_and_exit) - printf("%s", buf); - else - show_textbox(NULL, buf, 6, 60); -} - -static void show_help(struct menu *menu) -{ - struct gstr help = str_new(); - - help.max_width = getmaxx(stdscr) - 10; - menu_get_ext_help(menu, &help); - - show_helptext(_(menu_get_prompt(menu)), str_get(&help)); - str_free(&help); -} - -static void conf_choice(struct menu *menu) -{ - const char *prompt = _(menu_get_prompt(menu)); - struct menu *child; - struct symbol *active; - - active = sym_get_choice_value(menu->sym); - while (1) { - int res; - int selected; - item_reset(); - - current_menu = menu; - for (child = menu->list; child; child = child->next) { - if (!menu_is_visible(child)) - continue; - if (child->sym) - item_make("%s", _(menu_get_prompt(child))); - else { - item_make("*** %s ***", _(menu_get_prompt(child))); - item_set_tag(':'); - } - item_set_data(child); - if (child->sym == active) - item_set_selected(1); - if (child->sym == sym_get_choice_value(menu->sym)) - item_set_tag('X'); - } - dialog_clear(); - res = dialog_checklist(prompt ? _(prompt) : _("Main Menu"), - _(radiolist_instructions), - MENUBOX_HEIGTH_MIN, - MENUBOX_WIDTH_MIN, - CHECKLIST_HEIGTH_MIN); - selected = item_activate_selected(); - switch (res) { - case 0: - if (selected) { - child = item_data(); - if (!child->sym) - break; - - sym_set_tristate_value(child->sym, yes); - } - return; - case 1: - if (selected) { - child = item_data(); - show_help(child); - active = child->sym; - } else - show_help(menu); - break; - case KEY_ESC: - return; - case -ERRDISPLAYTOOSMALL: - return; - } - } -} - -static void conf_string(struct menu *menu) -{ - const char *prompt = menu_get_prompt(menu); - - while (1) { - int res; - const char *heading; - - switch (sym_get_type(menu->sym)) { - case S_INT: - heading = _(inputbox_instructions_int); - break; - case S_HEX: - heading = _(inputbox_instructions_hex); - break; - case S_STRING: - heading = _(inputbox_instructions_string); - break; - default: - heading = _("Internal mconf error!"); - } - dialog_clear(); - res = dialog_inputbox(prompt ? _(prompt) : _("Main Menu"), - heading, 10, 75, - sym_get_string_value(menu->sym)); - switch (res) { - case 0: - if (sym_set_string_value(menu->sym, dialog_input_result)) - return; - show_textbox(NULL, _("You have made an invalid entry."), 5, 43); - break; - case 1: - show_help(menu); - break; - case KEY_ESC: - return; - } - } -} - -static void conf_load(void) -{ - - while (1) { - int res; - dialog_clear(); - res = dialog_inputbox(NULL, load_config_text, - 11, 55, filename); - switch(res) { - case 0: - if (!dialog_input_result[0]) - return; - if (!conf_read(dialog_input_result)) { - set_config_filename(dialog_input_result); - sym_set_change_count(1); - return; - } - show_textbox(NULL, _("File does not exist!"), 5, 38); - break; - case 1: - show_helptext(_("Load Alternate Configuration"), load_config_help); - break; - case KEY_ESC: - return; - } - } -} - -static void conf_save(void) -{ - while (1) { - int res; - dialog_clear(); - res = dialog_inputbox(NULL, save_config_text, - 11, 55, filename); - switch(res) { - case 0: - if (!dialog_input_result[0]) - return; - if (!conf_write(dialog_input_result)) { - set_config_filename(dialog_input_result); - return; - } - show_textbox(NULL, _("Can't create file! Probably a nonexistent directory."), 5, 60); - break; - case 1: - show_helptext(_("Save Alternate Configuration"), save_config_help); - break; - case KEY_ESC: - return; - } - } -} - -static int handle_exit(void) -{ - int res; - - save_and_exit = 1; - reset_subtitle(); - dialog_clear(); - if (conf_get_changed()) - res = dialog_yesno(NULL, - _("Do you wish to save your new configuration?\n" - "(Press <ESC><ESC> to continue kernel configuration.)"), - 6, 60); - else - res = -1; - - end_dialog(saved_x, saved_y); - - switch (res) { - case 0: - if (conf_write(filename)) { - fprintf(stderr, _("\n\n" - "Error while writing of the configuration.\n" - "Your configuration changes were NOT saved." - "\n\n")); - return 1; - } - /* fall through */ - case -1: - printf(_("\n\n" - "*** End of the configuration.\n" - "*** Execute 'make' to start the build or try 'make help'." - "\n\n")); - res = 0; - break; - default: - fprintf(stderr, _("\n\n" - "Your configuration changes were NOT saved." - "\n\n")); - if (res != KEY_ESC) - res = 0; - } - - return res; -} - -static void sig_handler(int signo) -{ - exit(handle_exit()); -} - -int main(int ac, char **av) -{ - char *mode; - int res; - - setlocale(LC_ALL, ""); - bindtextdomain(PACKAGE, LOCALEDIR); - textdomain(PACKAGE); - - signal(SIGINT, sig_handler); - - conf_parse(av[1]); - conf_read(NULL); - - mode = getenv("MENUCONFIG_MODE"); - if (mode) { - if (!strcasecmp(mode, "single_menu")) - single_menu_mode = 1; - } - - if (init_dialog(NULL)) { - fprintf(stderr, N_("Your display is too small to run Menuconfig!\n")); - fprintf(stderr, N_("It must be at least 19 lines by 80 columns.\n")); - return 1; - } - - set_config_filename(conf_get_configname()); - conf_set_message_callback(conf_message_callback); - do { - conf(&rootmenu, NULL); - res = handle_exit(); - } while (res == KEY_ESC); - - return res; -} diff --git a/payloads/external/SeaBIOS/scripts/kconfig/menu.c b/payloads/external/SeaBIOS/scripts/kconfig/menu.c deleted file mode 100644 index a26cc5d2..00000000 --- a/payloads/external/SeaBIOS/scripts/kconfig/menu.c +++ /dev/null @@ -1,697 +0,0 @@ -/* - * Copyright (C) 2002 Roman Zippel <zippel@linux-m68k.org> - * Released under the terms of the GNU GPL v2.0. - */ - -#include <ctype.h> -#include <stdarg.h> -#include <stdlib.h> -#include <string.h> - -#include "lkc.h" - -static const char nohelp_text[] = "There is no help available for this option."; - -struct menu rootmenu; -static struct menu **last_entry_ptr; - -struct file *file_list; -struct file *current_file; - -void menu_warn(struct menu *menu, const char *fmt, ...) -{ - va_list ap; - va_start(ap, fmt); - fprintf(stderr, "%s:%d:warning: ", menu->file->name, menu->lineno); - vfprintf(stderr, fmt, ap); - fprintf(stderr, "\n"); - va_end(ap); -} - -static void prop_warn(struct property *prop, const char *fmt, ...) -{ - va_list ap; - va_start(ap, fmt); - fprintf(stderr, "%s:%d:warning: ", prop->file->name, prop->lineno); - vfprintf(stderr, fmt, ap); - fprintf(stderr, "\n"); - va_end(ap); -} - -void _menu_init(void) -{ - current_entry = current_menu = &rootmenu; - last_entry_ptr = &rootmenu.list; -} - -void menu_add_entry(struct symbol *sym) -{ - struct menu *menu; - - menu = xmalloc(sizeof(*menu)); - memset(menu, 0, sizeof(*menu)); - menu->sym = sym; - menu->parent = current_menu; - menu->file = current_file; - menu->lineno = zconf_lineno(); - - *last_entry_ptr = menu; - last_entry_ptr = &menu->next; - current_entry = menu; - if (sym) - menu_add_symbol(P_SYMBOL, sym, NULL); -} - -void menu_end_entry(void) -{ -} - -struct menu *menu_add_menu(void) -{ - menu_end_entry(); - last_entry_ptr = ¤t_entry->list; - return current_menu = current_entry; -} - -void menu_end_menu(void) -{ - last_entry_ptr = ¤t_menu->next; - current_menu = current_menu->parent; -} - -static struct expr *menu_check_dep(struct expr *e) -{ - if (!e) - return e; - - switch (e->type) { - case E_NOT: - e->left.expr = menu_check_dep(e->left.expr); - break; - case E_OR: - case E_AND: - e->left.expr = menu_check_dep(e->left.expr); - e->right.expr = menu_check_dep(e->right.expr); - break; - case E_SYMBOL: - /* change 'm' into 'm' && MODULES */ - if (e->left.sym == &symbol_mod) - return expr_alloc_and(e, expr_alloc_symbol(modules_sym)); - break; - default: - break; - } - return e; -} - -void menu_add_dep(struct expr *dep) -{ - current_entry->dep = expr_alloc_and(current_entry->dep, menu_check_dep(dep)); -} - -void menu_set_type(int type) -{ - struct symbol *sym = current_entry->sym; - - if (sym->type == type) - return; - if (sym->type == S_UNKNOWN) { - sym->type = type; - return; - } - menu_warn(current_entry, - "ignoring type redefinition of '%s' from '%s' to '%s'", - sym->name ? sym->name : "<choice>", - sym_type_name(sym->type), sym_type_name(type)); -} - -struct property *menu_add_prop(enum prop_type type, char *prompt, struct expr *expr, struct expr *dep) -{ - struct property *prop = prop_alloc(type, current_entry->sym); - - prop->menu = current_entry; - prop->expr = expr; - prop->visible.expr = menu_check_dep(dep); - - if (prompt) { - if (isspace(*prompt)) { - prop_warn(prop, "leading whitespace ignored"); - while (isspace(*prompt)) - prompt++; - } - if (current_entry->prompt && current_entry != &rootmenu) - prop_warn(prop, "prompt redefined"); - - /* Apply all upper menus' visibilities to actual prompts. */ - if(type == P_PROMPT) { - struct menu *menu = current_entry; - - while ((menu = menu->parent) != NULL) { - struct expr *dup_expr; - - if (!menu->visibility) - continue; - /* - * Do not add a reference to the - * menu's visibility expression but - * use a copy of it. Otherwise the - * expression reduction functions - * will modify expressions that have - * multiple references which can - * cause unwanted side effects. - */ - dup_expr = expr_copy(menu->visibility); - - prop->visible.expr - = expr_alloc_and(prop->visible.expr, - dup_expr); - } - } - - current_entry->prompt = prop; - } - prop->text = prompt; - - return prop; -} - -struct property *menu_add_prompt(enum prop_type type, char *prompt, struct expr *dep) -{ - return menu_add_prop(type, prompt, NULL, dep); -} - -void menu_add_visibility(struct expr *expr) -{ - current_entry->visibility = expr_alloc_and(current_entry->visibility, - expr); -} - -void menu_add_expr(enum prop_type type, struct expr *expr, struct expr *dep) -{ - menu_add_prop(type, NULL, expr, dep); -} - -void menu_add_symbol(enum prop_type type, struct symbol *sym, struct expr *dep) -{ - menu_add_prop(type, NULL, expr_alloc_symbol(sym), dep); -} - -void menu_add_option(int token, char *arg) -{ - switch (token) { - case T_OPT_MODULES: - if (modules_sym) - zconf_error("symbol '%s' redefines option 'modules'" - " already defined by symbol '%s'", - current_entry->sym->name, - modules_sym->name - ); - modules_sym = current_entry->sym; - break; - case T_OPT_DEFCONFIG_LIST: - if (!sym_defconfig_list) - sym_defconfig_list = current_entry->sym; - else if (sym_defconfig_list != current_entry->sym) - zconf_error("trying to redefine defconfig symbol"); - break; - case T_OPT_ENV: - prop_add_env(arg); - break; - case T_OPT_ALLNOCONFIG_Y: - current_entry->sym->flags |= SYMBOL_ALLNOCONFIG_Y; - break; - } -} - -static int menu_validate_number(struct symbol *sym, struct symbol *sym2) -{ - return sym2->type == S_INT || sym2->type == S_HEX || - (sym2->type == S_UNKNOWN && sym_string_valid(sym, sym2->name)); -} - -static void sym_check_prop(struct symbol *sym) -{ - struct property *prop; - struct symbol *sym2; - for (prop = sym->prop; prop; prop = prop->next) { - switch (prop->type) { - case P_DEFAULT: - if ((sym->type == S_STRING || sym->type == S_INT || sym->type == S_HEX) && - prop->expr->type != E_SYMBOL) - prop_warn(prop, - "default for config symbol '%s'" - " must be a single symbol", sym->name); - if (prop->expr->type != E_SYMBOL) - break; - sym2 = prop_get_symbol(prop); - if (sym->type == S_HEX || sym->type == S_INT) { - if (!menu_validate_number(sym, sym2)) - prop_warn(prop, - "'%s': number is invalid", - sym->name); - } - break; - case P_SELECT: - sym2 = prop_get_symbol(prop); - if (sym->type != S_BOOLEAN && sym->type != S_TRISTATE) - prop_warn(prop, - "config symbol '%s' uses select, but is " - "not boolean or tristate", sym->name); - else if (sym2->type != S_UNKNOWN && - sym2->type != S_BOOLEAN && - sym2->type != S_TRISTATE) - prop_warn(prop, - "'%s' has wrong type. 'select' only " - "accept arguments of boolean and " - "tristate type", sym2->name); - break; - case P_RANGE: - if (sym->type != S_INT && sym->type != S_HEX) - prop_warn(prop, "range is only allowed " - "for int or hex symbols"); - if (!menu_validate_number(sym, prop->expr->left.sym) || - !menu_validate_number(sym, prop->expr->right.sym)) - prop_warn(prop, "range is invalid"); - break; - default: - ; - } - } -} - -void menu_finalize(struct menu *parent) -{ - struct menu *menu, *last_menu; - struct symbol *sym; - struct property *prop; - struct expr *parentdep, *basedep, *dep, *dep2, **ep; - - sym = parent->sym; - if (parent->list) { - if (sym && sym_is_choice(sym)) { - if (sym->type == S_UNKNOWN) { - /* find the first choice value to find out choice type */ - current_entry = parent; - for (menu = parent->list; menu; menu = menu->next) { - if (menu->sym && menu->sym->type != S_UNKNOWN) { - menu_set_type(menu->sym->type); - break; - } - } - } - /* set the type of the remaining choice values */ - for (menu = parent->list; menu; menu = menu->next) { - current_entry = menu; - if (menu->sym && menu->sym->type == S_UNKNOWN) - menu_set_type(sym->type); - } - parentdep = expr_alloc_symbol(sym); - } else if (parent->prompt) - parentdep = parent->prompt->visible.expr; - else - parentdep = parent->dep; - - for (menu = parent->list; menu; menu = menu->next) { - basedep = expr_transform(menu->dep); - basedep = expr_alloc_and(expr_copy(parentdep), basedep); - basedep = expr_eliminate_dups(basedep); - menu->dep = basedep; - if (menu->sym) - prop = menu->sym->prop; - else - prop = menu->prompt; - for (; prop; prop = prop->next) { - if (prop->menu != menu) - continue; - dep = expr_transform(prop->visible.expr); - dep = expr_alloc_and(expr_copy(basedep), dep); - dep = expr_eliminate_dups(dep); - if (menu->sym && menu->sym->type != S_TRISTATE) - dep = expr_trans_bool(dep); - prop->visible.expr = dep; - if (prop->type == P_SELECT) { - struct symbol *es = prop_get_symbol(prop); - es->rev_dep.expr = expr_alloc_or(es->rev_dep.expr, - expr_alloc_and(expr_alloc_symbol(menu->sym), expr_copy(dep))); - } - } - } - for (menu = parent->list; menu; menu = menu->next) - menu_finalize(menu); - } else if (sym) { - basedep = parent->prompt ? parent->prompt->visible.expr : NULL; - basedep = expr_trans_compare(basedep, E_UNEQUAL, &symbol_no); - basedep = expr_eliminate_dups(expr_transform(basedep)); - last_menu = NULL; - for (menu = parent->next; menu; menu = menu->next) { - dep = menu->prompt ? menu->prompt->visible.expr : menu->dep; - if (!expr_contains_symbol(dep, sym)) - break; - if (expr_depends_symbol(dep, sym)) - goto next; - dep = expr_trans_compare(dep, E_UNEQUAL, &symbol_no); - dep = expr_eliminate_dups(expr_transform(dep)); - dep2 = expr_copy(basedep); - expr_eliminate_eq(&dep, &dep2); - expr_free(dep); - if (!expr_is_yes(dep2)) { - expr_free(dep2); - break; - } - expr_free(dep2); - next: - menu_finalize(menu); - menu->parent = parent; - last_menu = menu; - } - if (last_menu) { - parent->list = parent->next; - parent->next = last_menu->next; - last_menu->next = NULL; - } - - sym->dir_dep.expr = expr_alloc_or(sym->dir_dep.expr, parent->dep); - } - for (menu = parent->list; menu; menu = menu->next) { - if (sym && sym_is_choice(sym) && - menu->sym && !sym_is_choice_value(menu->sym)) { - current_entry = menu; - menu->sym->flags |= SYMBOL_CHOICEVAL; - if (!menu->prompt) - menu_warn(menu, "choice value must have a prompt"); - for (prop = menu->sym->prop; prop; prop = prop->next) { - if (prop->type == P_DEFAULT) - prop_warn(prop, "defaults for choice " - "values not supported"); - if (prop->menu == menu) - continue; - if (prop->type == P_PROMPT && - prop->menu->parent->sym != sym) - prop_warn(prop, "choice value used outside its choice group"); - } - /* Non-tristate choice values of tristate choices must - * depend on the choice being set to Y. The choice - * values' dependencies were propagated to their - * properties above, so the change here must be re- - * propagated. - */ - if (sym->type == S_TRISTATE && menu->sym->type != S_TRISTATE) { - basedep = expr_alloc_comp(E_EQUAL, sym, &symbol_yes); - menu->dep = expr_alloc_and(basedep, menu->dep); - for (prop = menu->sym->prop; prop; prop = prop->next) { - if (prop->menu != menu) - continue; - prop->visible.expr = expr_alloc_and(expr_copy(basedep), - prop->visible.expr); - } - } - menu_add_symbol(P_CHOICE, sym, NULL); - prop = sym_get_choice_prop(sym); - for (ep = &prop->expr; *ep; ep = &(*ep)->left.expr) - ; - *ep = expr_alloc_one(E_LIST, NULL); - (*ep)->right.sym = menu->sym; - } - if (menu->list && (!menu->prompt || !menu->prompt->text)) { - for (last_menu = menu->list; ; last_menu = last_menu->next) { - last_menu->parent = parent; - if (!last_menu->next) - break; - } - last_menu->next = menu->next; - menu->next = menu->list; - menu->list = NULL; - } - } - - if (sym && !(sym->flags & SYMBOL_WARNED)) { - if (sym->type == S_UNKNOWN) - menu_warn(parent, "config symbol defined without type"); - - if (sym_is_choice(sym) && !parent->prompt) - menu_warn(parent, "choice must have a prompt"); - - /* Check properties connected to this symbol */ - sym_check_prop(sym); - sym->flags |= SYMBOL_WARNED; - } - - if (sym && !sym_is_optional(sym) && parent->prompt) { - sym->rev_dep.expr = expr_alloc_or(sym->rev_dep.expr, - expr_alloc_and(parent->prompt->visible.expr, - expr_alloc_symbol(&symbol_mod))); - } -} - -bool menu_has_prompt(struct menu *menu) -{ - if (!menu->prompt) - return false; - return true; -} - -/* - * Determine if a menu is empty. - * A menu is considered empty if it contains no or only - * invisible entries. - */ -bool menu_is_empty(struct menu *menu) -{ - struct menu *child; - - for (child = menu->list; child; child = child->next) { - if (menu_is_visible(child)) - return(false); - } - return(true); -} - -bool menu_is_visible(struct menu *menu) -{ - struct menu *child; - struct symbol *sym; - tristate visible; - - if (!menu->prompt) - return false; - - if (menu->visibility) { - if (expr_calc_value(menu->visibility) == no) - return no; - } - - sym = menu->sym; - if (sym) { - sym_calc_value(sym); - visible = menu->prompt->visible.tri; - } else - visible = menu->prompt->visible.tri = expr_calc_value(menu->prompt->visible.expr); - - if (visible != no) - return true; - - if (!sym || sym_get_tristate_value(menu->sym) == no) - return false; - - for (child = menu->list; child; child = child->next) { - if (menu_is_visible(child)) { - if (sym) - sym->flags |= SYMBOL_DEF_USER; - return true; - } - } - - return false; -} - -const char *menu_get_prompt(struct menu *menu) -{ - if (menu->prompt) - return menu->prompt->text; - else if (menu->sym) - return menu->sym->name; - return NULL; -} - -struct menu *menu_get_root_menu(struct menu *menu) -{ - return &rootmenu; -} - -struct menu *menu_get_parent_menu(struct menu *menu) -{ - enum prop_type type; - - for (; menu != &rootmenu; menu = menu->parent) { - type = menu->prompt ? menu->prompt->type : 0; - if (type == P_MENU) - break; - } - return menu; -} - -bool menu_has_help(struct menu *menu) -{ - return menu->help != NULL; -} - -const char *menu_get_help(struct menu *menu) -{ - if (menu->help) - return menu->help; - else - return ""; -} - -static void get_prompt_str(struct gstr *r, struct property *prop, - struct list_head *head) -{ - int i, j; - struct menu *submenu[8], *menu, *location = NULL; - struct jump_key *jump; - - str_printf(r, _("Prompt: %s\n"), _(prop->text)); - menu = prop->menu->parent; - for (i = 0; menu != &rootmenu && i < 8; menu = menu->parent) { - bool accessible = menu_is_visible(menu); - - submenu[i++] = menu; - if (location == NULL && accessible) - location = menu; - } - if (head && location) { - jump = xmalloc(sizeof(struct jump_key)); - - if (menu_is_visible(prop->menu)) { - /* - * There is not enough room to put the hint at the - * beginning of the "Prompt" line. Put the hint on the - * last "Location" line even when it would belong on - * the former. - */ - jump->target = prop->menu; - } else - jump->target = location; - - if (list_empty(head)) - jump->index = 0; - else - jump->index = list_entry(head->prev, struct jump_key, - entries)->index + 1; - - list_add_tail(&jump->entries, head); - } - - if (i > 0) { - str_printf(r, _(" Location:\n")); - for (j = 4; --i >= 0; j += 2) { - menu = submenu[i]; - if (head && location && menu == location) - jump->offset = strlen(r->s); - str_printf(r, "%*c-> %s", j, ' ', - _(menu_get_prompt(menu))); - if (menu->sym) { - str_printf(r, " (%s [=%s])", menu->sym->name ? - menu->sym->name : _("<choice>"), - sym_get_string_value(menu->sym)); - } - str_append(r, "\n"); - } - } -} - -/* - * get property of type P_SYMBOL - */ -static struct property *get_symbol_prop(struct symbol *sym) -{ - struct property *prop = NULL; - - for_all_properties(sym, prop, P_SYMBOL) - break; - return prop; -} - -/* - * head is optional and may be NULL - */ -void get_symbol_str(struct gstr *r, struct symbol *sym, - struct list_head *head) -{ - bool hit; - struct property *prop; - - if (sym && sym->name) { - str_printf(r, "Symbol: %s [=%s]\n", sym->name, - sym_get_string_value(sym)); - str_printf(r, "Type : %s\n", sym_type_name(sym->type)); - if (sym->type == S_INT || sym->type == S_HEX) { - prop = sym_get_range_prop(sym); - if (prop) { - str_printf(r, "Range : "); - expr_gstr_print(prop->expr, r); - str_append(r, "\n"); - } - } - } - for_all_prompts(sym, prop) - get_prompt_str(r, prop, head); - - prop = get_symbol_prop(sym); - if (prop) { - str_printf(r, _(" Defined at %s:%d\n"), prop->menu->file->name, - prop->menu->lineno); - if (!expr_is_yes(prop->visible.expr)) { - str_append(r, _(" Depends on: ")); - expr_gstr_print(prop->visible.expr, r); - str_append(r, "\n"); - } - } - - hit = false; - for_all_properties(sym, prop, P_SELECT) { - if (!hit) { - str_append(r, " Selects: "); - hit = true; - } else - str_printf(r, " && "); - expr_gstr_print(prop->expr, r); - } - if (hit) - str_append(r, "\n"); - if (sym->rev_dep.expr) { - str_append(r, _(" Selected by: ")); - expr_gstr_print(sym->rev_dep.expr, r); - str_append(r, "\n"); - } - str_append(r, "\n\n"); -} - -struct gstr get_relations_str(struct symbol **sym_arr, struct list_head *head) -{ - struct symbol *sym; - struct gstr res = str_new(); - int i; - - for (i = 0; sym_arr && (sym = sym_arr[i]); i++) - get_symbol_str(&res, sym, head); - if (!i) - str_append(&res, _("No matches found.\n")); - return res; -} - - -void menu_get_ext_help(struct menu *menu, struct gstr *help) -{ - struct symbol *sym = menu->sym; - const char *help_text = nohelp_text; - - if (menu_has_help(menu)) { - if (sym->name) - str_printf(help, "%s%s:\n\n", CONFIG_, sym->name); - help_text = menu_get_help(menu); - } - str_printf(help, "%s\n", _(help_text)); - if (sym) - get_symbol_str(help, sym, NULL); -} diff --git a/payloads/external/SeaBIOS/scripts/kconfig/merge_config.sh b/payloads/external/SeaBIOS/scripts/kconfig/merge_config.sh deleted file mode 100755 index 81b0c61b..00000000 --- a/payloads/external/SeaBIOS/scripts/kconfig/merge_config.sh +++ /dev/null @@ -1,150 +0,0 @@ -#!/bin/sh -# merge_config.sh - Takes a list of config fragment values, and merges -# them one by one. Provides warnings on overridden values, and specified -# values that did not make it to the resulting .config file (due to missed -# dependencies or config symbol removal). -# -# Portions reused from kconf_check and generate_cfg: -# http://git.yoctoproject.org/cgit/cgit.cgi/yocto-kernel-tools/tree/tools/kconf_check -# http://git.yoctoproject.org/cgit/cgit.cgi/yocto-kernel-tools/tree/tools/generate_cfg -# -# Copyright (c) 2009-2010 Wind River Systems, Inc. -# Copyright 2011 Linaro -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License version 2 as -# published by the Free Software Foundation. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. -# See the GNU General Public License for more details. - -clean_up() { - rm -f $TMP_FILE - exit -} -trap clean_up HUP INT TERM - -usage() { - echo "Usage: $0 [OPTIONS] [CONFIG [...]]" - echo " -h display this help text" - echo " -m only merge the fragments, do not execute the make command" - echo " -n use allnoconfig instead of alldefconfig" - echo " -r list redundant entries when merging fragments" - echo " -O dir to put generated output files" -} - -MAKE=true -ALLTARGET=alldefconfig -WARNREDUN=false -OUTPUT=. - -while true; do - case $1 in - "-n") - ALLTARGET=allnoconfig - shift - continue - ;; - "-m") - MAKE=false - shift - continue - ;; - "-h") - usage - exit - ;; - "-r") - WARNREDUN=true - shift - continue - ;; - "-O") - if [ -d $2 ];then - OUTPUT=$(echo $2 | sed 's/\/*$//') - else - echo "output directory $2 does not exist" 1>&2 - exit 1 - fi - shift 2 - continue - ;; - *) - break - ;; - esac -done - -INITFILE=$1 -shift; - -MERGE_LIST=$* -SED_CONFIG_EXP="s/^\(# \)\{0,1\}\(CONFIG_[a-zA-Z0-9_]*\)[= ].*/\2/p" -TMP_FILE=$(mktemp ./.tmp.config.XXXXXXXXXX) - -echo "Using $INITFILE as base" -cat $INITFILE > $TMP_FILE - -# Merge files, printing warnings on overrided values -for MERGE_FILE in $MERGE_LIST ; do - echo "Merging $MERGE_FILE" - CFG_LIST=$(sed -n "$SED_CONFIG_EXP" $MERGE_FILE) - - for CFG in $CFG_LIST ; do - grep -q -w $CFG $TMP_FILE - if [ $? -eq 0 ] ; then - PREV_VAL=$(grep -w $CFG $TMP_FILE) - NEW_VAL=$(grep -w $CFG $MERGE_FILE) - if [ "x$PREV_VAL" != "x$NEW_VAL" ] ; then - echo Value of $CFG is redefined by fragment $MERGE_FILE: - echo Previous value: $PREV_VAL - echo New value: $NEW_VAL - echo - elif [ "$WARNREDUN" = "true" ]; then - echo Value of $CFG is redundant by fragment $MERGE_FILE: - fi - sed -i "/$CFG[ =]/d" $TMP_FILE - fi - done - cat $MERGE_FILE >> $TMP_FILE -done - -if [ "$MAKE" = "false" ]; then - cp $TMP_FILE $OUTPUT/.config - echo "#" - echo "# merged configuration written to $OUTPUT/.config (needs make)" - echo "#" - clean_up - exit -fi - -# If we have an output dir, setup the O= argument, otherwise leave -# it blank, since O=. will create an unnecessary ./source softlink -OUTPUT_ARG="" -if [ "$OUTPUT" != "." ] ; then - OUTPUT_ARG="O=$OUTPUT" -fi - - -# Use the merged file as the starting point for: -# alldefconfig: Fills in any missing symbols with Kconfig default -# allnoconfig: Fills in any missing symbols with # CONFIG_* is not set -make KCONFIG_ALLCONFIG=$TMP_FILE $OUTPUT_ARG $ALLTARGET - - -# Check all specified config values took (might have missed-dependency issues) -for CFG in $(sed -n "$SED_CONFIG_EXP" $TMP_FILE); do - - REQUESTED_VAL=$(grep -w -e "$CFG" $TMP_FILE) - ACTUAL_VAL=$(grep -w -e "$CFG" $OUTPUT/.config) - if [ "x$REQUESTED_VAL" != "x$ACTUAL_VAL" ] ; then - echo "Value requested for $CFG not in final .config" - echo "Requested value: $REQUESTED_VAL" - echo "Actual value: $ACTUAL_VAL" - echo "" - fi -done - -clean_up diff --git a/payloads/external/SeaBIOS/scripts/kconfig/nconf.c b/payloads/external/SeaBIOS/scripts/kconfig/nconf.c deleted file mode 100644 index 984489ef..00000000 --- a/payloads/external/SeaBIOS/scripts/kconfig/nconf.c +++ /dev/null @@ -1,1556 +0,0 @@ -/* - * Copyright (C) 2008 Nir Tzachar <nir.tzachar@gmail.com? - * Released under the terms of the GNU GPL v2.0. - * - * Derived from menuconfig. - * - */ -#define _GNU_SOURCE -#include <string.h> -#include <stdlib.h> - -#include "lkc.h" -#include "nconf.h" -#include <ctype.h> - -static const char nconf_global_help[] = N_( -"Help windows\n" -"------------\n" -"o Global help: Unless in a data entry window, pressing <F1> will give \n" -" you the global help window, which you are just reading.\n" -"\n" -"o A short version of the global help is available by pressing <F3>.\n" -"\n" -"o Local help: To get help related to the current menu entry, use any\n" -" of <?> <h>, or if in a data entry window then press <F1>.\n" -"\n" -"\n" -"Menu entries\n" -"------------\n" -"This interface lets you select features and parameters for the kernel\n" -"build. Kernel features can either be built-in, modularized, or removed.\n" -"Parameters must be entered as text or decimal or hexadecimal numbers.\n" -"\n" -"Menu entries beginning with following braces represent features that\n" -" [ ] can be built in or removed\n" -" < > can be built in, modularized or removed\n" -" { } can be built in or modularized, are selected by another feature\n" -" - - are selected by another feature\n" -" XXX cannot be selected. Symbol Info <F2> tells you why.\n" -"*, M or whitespace inside braces means to build in, build as a module\n" -"or to exclude the feature respectively.\n" -"\n" -"To change any of these features, highlight it with the movement keys\n" -"listed below and press <y> to build it in, <m> to make it a module or\n" -"<n> to remove it. You may press the <Space> key to cycle through the\n" -"available options.\n" -"\n" -"A trailing \"--->\" designates a submenu, a trailing \"----\" an\n" -"empty submenu.\n" -"\n" -"Menu navigation keys\n" -"----------------------------------------------------------------------\n" -"Linewise up <Up>\n" -"Linewise down <Down>\n" -"Pagewise up <Page Up>\n" -"Pagewise down <Page Down>\n" -"First entry <Home>\n" -"Last entry <End>\n" -"Enter a submenu <Right> <Enter>\n" -"Go back to parent menu <Left> <Esc> <F5>\n" -"Close a help window <Enter> <Esc> <F5>\n" -"Close entry window, apply <Enter>\n" -"Close entry window, forget <Esc> <F5>\n" -"Start incremental, case-insensitive search for STRING in menu entries,\n" -" no regex support, STRING is displayed in upper left corner\n" -" </>STRING\n" -" Remove last character <Backspace>\n" -" Jump to next hit <Down>\n" -" Jump to previous hit <Up>\n" -"Exit menu search mode </> <Esc>\n" -"Search for configuration variables with or without leading CONFIG_\n" -" <F8>RegExpr<Enter>\n" -"Verbose search help <F8><F1>\n" -"----------------------------------------------------------------------\n" -"\n" -"Unless in a data entry window, key <1> may be used instead of <F1>,\n" -"<2> instead of <F2>, etc.\n" -"\n" -"\n" -"Radiolist (Choice list)\n" -"-----------------------\n" -"Use the movement keys listed above to select the option you wish to set\n" -"and press <Space>.\n" -"\n" -"\n" -"Data entry\n" -"----------\n" -"Enter the requested information and press <Enter>. Hexadecimal values\n" -"may be entered without the \"0x\" prefix.\n" -"\n" -"\n" -"Text Box (Help Window)\n" -"----------------------\n" -"Use movement keys as listed in table above.\n" -"\n" -"Press any of <Enter> <Esc> <q> <F5> <F9> to exit.\n" -"\n" -"\n" -"Alternate configuration files\n" -"-----------------------------\n" -"nconfig supports switching between different configurations.\n" -"Press <F6> to save your current configuration. Press <F7> and enter\n" -"a file name to load a previously saved configuration.\n" -"\n" -"\n" -"Terminal configuration\n" -"----------------------\n" -"If you use nconfig in a xterm window, make sure your TERM environment\n" -"variable specifies a terminal configuration which supports at least\n" -"16 colors. Otherwise nconfig will look rather bad.\n" -"\n" -"If the \"stty size\" command reports the current terminalsize correctly,\n" -"nconfig will adapt to sizes larger than the traditional 80x25 \"standard\"\n" -"and display longer menus properly.\n" -"\n" -"\n" -"Single menu mode\n" -"----------------\n" -"If you prefer to have all of the menu entries listed in a single menu,\n" -"rather than the default multimenu hierarchy, run nconfig with\n" -"NCONFIG_MODE environment variable set to single_menu. Example:\n" -"\n" -"make NCONFIG_MODE=single_menu nconfig\n" -"\n" -"<Enter> will then unfold the appropriate category, or fold it if it\n" -"is already unfolded. Folded menu entries will be designated by a\n" -"leading \"++>\" and unfolded entries by a leading \"-->\".\n" -"\n" -"Note that this mode can eventually be a little more CPU expensive than\n" -"the default mode, especially with a larger number of unfolded submenus.\n" -"\n"), -menu_no_f_instructions[] = N_( -"Legend: [*] built-in [ ] excluded <M> module < > module capable.\n" -"Submenus are designated by a trailing \"--->\", empty ones by \"----\".\n" -"\n" -"Use the following keys to navigate the menus:\n" -"Move up or down with <Up> and <Down>.\n" -"Enter a submenu with <Enter> or <Right>.\n" -"Exit a submenu to its parent menu with <Esc> or <Left>.\n" -"Pressing <y> includes, <n> excludes, <m> modularizes features.\n" -"Pressing <Space> cycles through the available options.\n" -"To search for menu entries press </>.\n" -"<Esc> always leaves the current window.\n" -"\n" -"You do not have function keys support.\n" -"Press <1> instead of <F1>, <2> instead of <F2>, etc.\n" -"For verbose global help use key <1>.\n" -"For help related to the current menu entry press <?> or <h>.\n"), -menu_instructions[] = N_( -"Legend: [*] built-in [ ] excluded <M> module < > module capable.\n" -"Submenus are designated by a trailing \"--->\", empty ones by \"----\".\n" -"\n" -"Use the following keys to navigate the menus:\n" -"Move up or down with <Up> or <Down>.\n" -"Enter a submenu with <Enter> or <Right>.\n" -"Exit a submenu to its parent menu with <Esc> or <Left>.\n" -"Pressing <y> includes, <n> excludes, <m> modularizes features.\n" -"Pressing <Space> cycles through the available options.\n" -"To search for menu entries press </>.\n" -"<Esc> always leaves the current window.\n" -"\n" -"Pressing <1> may be used instead of <F1>, <2> instead of <F2>, etc.\n" -"For verbose global help press <F1>.\n" -"For help related to the current menu entry press <?> or <h>.\n"), -radiolist_instructions[] = N_( -"Press <Up>, <Down>, <Home> or <End> to navigate a radiolist, select\n" -"with <Space>.\n" -"For help related to the current entry press <?> or <h>.\n" -"For global help press <F1>.\n"), -inputbox_instructions_int[] = N_( -"Please enter a decimal value.\n" -"Fractions will not be accepted.\n" -"Press <Enter> to apply, <Esc> to cancel."), -inputbox_instructions_hex[] = N_( -"Please enter a hexadecimal value.\n" -"Press <Enter> to apply, <Esc> to cancel."), -inputbox_instructions_string[] = N_( -"Please enter a string value.\n" -"Press <Enter> to apply, <Esc> to cancel."), -setmod_text[] = N_( -"This feature depends on another feature which has been configured as a\n" -"module. As a result, the current feature will be built as a module too."), -load_config_text[] = N_( -"Enter the name of the configuration file you wish to load.\n" -"Accept the name shown to restore the configuration you last\n" -"retrieved. Leave empty to abort."), -load_config_help[] = N_( -"For various reasons, one may wish to keep several different\n" -"configurations available on a single machine.\n" -"\n" -"If you have saved a previous configuration in a file other than the\n" -"default one, entering its name here will allow you to load and modify\n" -"that configuration.\n" -"\n" -"Leave empty to abort.\n"), -save_config_text[] = N_( -"Enter a filename to which this configuration should be saved\n" -"as an alternate. Leave empty to abort."), -save_config_help[] = N_( -"For various reasons, one may wish to keep several different\n" -"configurations available on a single machine.\n" -"\n" -"Entering a file name here will allow you to later retrieve, modify\n" -"and use the current configuration as an alternate to whatever\n" -"configuration options you have selected at that time.\n" -"\n" -"Leave empty to abort.\n"), -search_help[] = N_( -"Search for symbols (configuration variable names CONFIG_*) and display\n" -"their relations. Regular expressions are supported.\n" -"Example: Search for \"^FOO\".\n" -"Result:\n" -"-----------------------------------------------------------------\n" -"Symbol: FOO [ = m]\n" -"Prompt: Foo bus is used to drive the bar HW\n" -"Defined at drivers/pci/Kconfig:47\n" -"Depends on: X86_LOCAL_APIC && X86_IO_APIC || IA64\n" -"Location:\n" -" -> Bus options (PCI, PCMCIA, EISA, ISA)\n" -" -> PCI support (PCI [ = y])\n" -" -> PCI access mode (<choice> [ = y])\n" -"Selects: LIBCRC32\n" -"Selected by: BAR\n" -"-----------------------------------------------------------------\n" -"o The line 'Prompt:' shows the text displayed for this symbol in\n" -" the menu hierarchy.\n" -"o The 'Defined at' line tells at what file / line number the symbol is\n" -" defined.\n" -"o The 'Depends on:' line lists symbols that need to be defined for\n" -" this symbol to be visible and selectable in the menu.\n" -"o The 'Location:' lines tell, where in the menu structure this symbol\n" -" is located. A location followed by a [ = y] indicates that this is\n" -" a selectable menu item, and the current value is displayed inside\n" -" brackets.\n" -"o The 'Selects:' line tells, what symbol will be automatically selected\n" -" if this symbol is selected (y or m).\n" -"o The 'Selected by' line tells what symbol has selected this symbol.\n" -"\n" -"Only relevant lines are shown.\n" -"\n\n" -"Search examples:\n" -"USB => find all symbols containing USB\n" -"^USB => find all symbols starting with USB\n" -"USB$ => find all symbols ending with USB\n" -"\n"); - -struct mitem { - char str[256]; - char tag; - void *usrptr; - int is_visible; -}; - -#define MAX_MENU_ITEMS 4096 -static int show_all_items; -static int indent; -static struct menu *current_menu; -static int child_count; -static int single_menu_mode; -/* the window in which all information appears */ -static WINDOW *main_window; -/* the largest size of the menu window */ -static int mwin_max_lines; -static int mwin_max_cols; -/* the window in which we show option buttons */ -static MENU *curses_menu; -static ITEM *curses_menu_items[MAX_MENU_ITEMS]; -static struct mitem k_menu_items[MAX_MENU_ITEMS]; -static int items_num; -static int global_exit; -/* the currently selected button */ -const char *current_instructions = menu_instructions; - -static char *dialog_input_result; -static int dialog_input_result_len; - -static void conf(struct menu *menu); -static void conf_choice(struct menu *menu); -static void conf_string(struct menu *menu); -static void conf_load(void); -static void conf_save(void); -static void show_help(struct menu *menu); -static int do_exit(void); -static void setup_windows(void); -static void search_conf(void); - -typedef void (*function_key_handler_t)(int *key, struct menu *menu); -static void handle_f1(int *key, struct menu *current_item); -static void handle_f2(int *key, struct menu *current_item); -static void handle_f3(int *key, struct menu *current_item); -static void handle_f4(int *key, struct menu *current_item); -static void handle_f5(int *key, struct menu *current_item); -static void handle_f6(int *key, struct menu *current_item); -static void handle_f7(int *key, struct menu *current_item); -static void handle_f8(int *key, struct menu *current_item); -static void handle_f9(int *key, struct menu *current_item); - -struct function_keys { - const char *key_str; - const char *func; - function_key key; - function_key_handler_t handler; -}; - -static const int function_keys_num = 9; -struct function_keys function_keys[] = { - { - .key_str = "F1", - .func = "Help", - .key = F_HELP, - .handler = handle_f1, - }, - { - .key_str = "F2", - .func = "SymInfo", - .key = F_SYMBOL, - .handler = handle_f2, - }, - { - .key_str = "F3", - .func = "Help 2", - .key = F_INSTS, - .handler = handle_f3, - }, - { - .key_str = "F4", - .func = "ShowAll", - .key = F_CONF, - .handler = handle_f4, - }, - { - .key_str = "F5", - .func = "Back", - .key = F_BACK, - .handler = handle_f5, - }, - { - .key_str = "F6", - .func = "Save", - .key = F_SAVE, - .handler = handle_f6, - }, - { - .key_str = "F7", - .func = "Load", - .key = F_LOAD, - .handler = handle_f7, - }, - { - .key_str = "F8", - .func = "SymSearch", - .key = F_SEARCH, - .handler = handle_f8, - }, - { - .key_str = "F9", - .func = "Exit", - .key = F_EXIT, - .handler = handle_f9, - }, -}; - -static void print_function_line(void) -{ - int i; - int offset = 1; - const int skip = 1; - int lines = getmaxy(stdscr); - - for (i = 0; i < function_keys_num; i++) { - (void) wattrset(main_window, attributes[FUNCTION_HIGHLIGHT]); - mvwprintw(main_window, lines-3, offset, - "%s", - function_keys[i].key_str); - (void) wattrset(main_window, attributes[FUNCTION_TEXT]); - offset += strlen(function_keys[i].key_str); - mvwprintw(main_window, lines-3, - offset, "%s", - function_keys[i].func); - offset += strlen(function_keys[i].func) + skip; - } - (void) wattrset(main_window, attributes[NORMAL]); -} - -/* help */ -static void handle_f1(int *key, struct menu *current_item) -{ - show_scroll_win(main_window, - _("Global help"), _(nconf_global_help)); - return; -} - -/* symbole help */ -static void handle_f2(int *key, struct menu *current_item) -{ - show_help(current_item); - return; -} - -/* instructions */ -static void handle_f3(int *key, struct menu *current_item) -{ - show_scroll_win(main_window, - _("Short help"), - _(current_instructions)); - return; -} - -/* config */ -static void handle_f4(int *key, struct menu *current_item) -{ - int res = btn_dialog(main_window, - _("Show all symbols?"), - 2, - " <Show All> ", - "<Don't show all>"); - if (res == 0) - show_all_items = 1; - else if (res == 1) - show_all_items = 0; - - return; -} - -/* back */ -static void handle_f5(int *key, struct menu *current_item) -{ - *key = KEY_LEFT; - return; -} - -/* save */ -static void handle_f6(int *key, struct menu *current_item) -{ - conf_save(); - return; -} - -/* load */ -static void handle_f7(int *key, struct menu *current_item) -{ - conf_load(); - return; -} - -/* search */ -static void handle_f8(int *key, struct menu *current_item) -{ - search_conf(); - return; -} - -/* exit */ -static void handle_f9(int *key, struct menu *current_item) -{ - do_exit(); - return; -} - -/* return != 0 to indicate the key was handles */ -static int process_special_keys(int *key, struct menu *menu) -{ - int i; - - if (*key == KEY_RESIZE) { - setup_windows(); - return 1; - } - - for (i = 0; i < function_keys_num; i++) { - if (*key == KEY_F(function_keys[i].key) || - *key == '0' + function_keys[i].key){ - function_keys[i].handler(key, menu); - return 1; - } - } - - return 0; -} - -static void clean_items(void) -{ - int i; - for (i = 0; curses_menu_items[i]; i++) - free_item(curses_menu_items[i]); - bzero(curses_menu_items, sizeof(curses_menu_items)); - bzero(k_menu_items, sizeof(k_menu_items)); - items_num = 0; -} - -typedef enum {MATCH_TINKER_PATTERN_UP, MATCH_TINKER_PATTERN_DOWN, - FIND_NEXT_MATCH_DOWN, FIND_NEXT_MATCH_UP} match_f; - -/* return the index of the matched item, or -1 if no such item exists */ -static int get_mext_match(const char *match_str, match_f flag) -{ - int match_start = item_index(current_item(curses_menu)); - int index; - - if (flag == FIND_NEXT_MATCH_DOWN) - ++match_start; - else if (flag == FIND_NEXT_MATCH_UP) - --match_start; - - index = match_start; - index = (index + items_num) % items_num; - while (true) { - char *str = k_menu_items[index].str; - if (strcasestr(str, match_str) != 0) - return index; - if (flag == FIND_NEXT_MATCH_UP || - flag == MATCH_TINKER_PATTERN_UP) - --index; - else - ++index; - index = (index + items_num) % items_num; - if (index == match_start) - return -1; - } -} - -/* Make a new item. */ -static void item_make(struct menu *menu, char tag, const char *fmt, ...) -{ - va_list ap; - - if (items_num > MAX_MENU_ITEMS-1) - return; - - bzero(&k_menu_items[items_num], sizeof(k_menu_items[0])); - k_menu_items[items_num].tag = tag; - k_menu_items[items_num].usrptr = menu; - if (menu != NULL) - k_menu_items[items_num].is_visible = - menu_is_visible(menu); - else - k_menu_items[items_num].is_visible = 1; - - va_start(ap, fmt); - vsnprintf(k_menu_items[items_num].str, - sizeof(k_menu_items[items_num].str), - fmt, ap); - va_end(ap); - - if (!k_menu_items[items_num].is_visible) - memcpy(k_menu_items[items_num].str, "XXX", 3); - - curses_menu_items[items_num] = new_item( - k_menu_items[items_num].str, - k_menu_items[items_num].str); - set_item_userptr(curses_menu_items[items_num], - &k_menu_items[items_num]); - /* - if (!k_menu_items[items_num].is_visible) - item_opts_off(curses_menu_items[items_num], O_SELECTABLE); - */ - - items_num++; - curses_menu_items[items_num] = NULL; -} - -/* very hackish. adds a string to the last item added */ -static void item_add_str(const char *fmt, ...) -{ - va_list ap; - int index = items_num-1; - char new_str[256]; - char tmp_str[256]; - - if (index < 0) - return; - - va_start(ap, fmt); - vsnprintf(new_str, sizeof(new_str), fmt, ap); - va_end(ap); - snprintf(tmp_str, sizeof(tmp_str), "%s%s", - k_menu_items[index].str, new_str); - strncpy(k_menu_items[index].str, - tmp_str, - sizeof(k_menu_items[index].str)); - - free_item(curses_menu_items[index]); - curses_menu_items[index] = new_item( - k_menu_items[index].str, - k_menu_items[index].str); - set_item_userptr(curses_menu_items[index], - &k_menu_items[index]); -} - -/* get the tag of the currently selected item */ -static char item_tag(void) -{ - ITEM *cur; - struct mitem *mcur; - - cur = current_item(curses_menu); - if (cur == NULL) - return 0; - mcur = (struct mitem *) item_userptr(cur); - return mcur->tag; -} - -static int curses_item_index(void) -{ - return item_index(current_item(curses_menu)); -} - -static void *item_data(void) -{ - ITEM *cur; - struct mitem *mcur; - - cur = current_item(curses_menu); - if (!cur) - return NULL; - mcur = (struct mitem *) item_userptr(cur); - return mcur->usrptr; - -} - -static int item_is_tag(char tag) -{ - return item_tag() == tag; -} - -static char filename[PATH_MAX+1]; -static char menu_backtitle[PATH_MAX+128]; -static const char *set_config_filename(const char *config_filename) -{ - int size; - - size = snprintf(menu_backtitle, sizeof(menu_backtitle), - "%s - %s", config_filename, rootmenu.prompt->text); - if (size >= sizeof(menu_backtitle)) - menu_backtitle[sizeof(menu_backtitle)-1] = '\0'; - - size = snprintf(filename, sizeof(filename), "%s", config_filename); - if (size >= sizeof(filename)) - filename[sizeof(filename)-1] = '\0'; - return menu_backtitle; -} - -/* return = 0 means we are successful. - * -1 means go on doing what you were doing - */ -static int do_exit(void) -{ - int res; - if (!conf_get_changed()) { - global_exit = 1; - return 0; - } - res = btn_dialog(main_window, - _("Do you wish to save your new configuration?\n" - "<ESC> to cancel and resume nconfig."), - 2, - " <save> ", - "<don't save>"); - if (res == KEY_EXIT) { - global_exit = 0; - return -1; - } - - /* if we got here, the user really wants to exit */ - switch (res) { - case 0: - res = conf_write(filename); - if (res) - btn_dialog( - main_window, - _("Error during writing of configuration.\n" - "Your configuration changes were NOT saved."), - 1, - "<OK>"); - break; - default: - btn_dialog( - main_window, - _("Your configuration changes were NOT saved."), - 1, - "<OK>"); - break; - } - global_exit = 1; - return 0; -} - - -static void search_conf(void) -{ - struct symbol **sym_arr; - struct gstr res; - struct gstr title; - char *dialog_input; - int dres; - - title = str_new(); - str_printf( &title, _("Enter (sub)string or regexp to search for " - "(with or without \"%s\")"), CONFIG_); - -again: - dres = dialog_inputbox(main_window, - _("Search Configuration Parameter"), - str_get(&title), - "", &dialog_input_result, &dialog_input_result_len); - switch (dres) { - case 0: - break; - case 1: - show_scroll_win(main_window, - _("Search Configuration"), search_help); - goto again; - default: - str_free(&title); - return; - } - - /* strip the prefix if necessary */ - dialog_input = dialog_input_result; - if (strncasecmp(dialog_input_result, CONFIG_, strlen(CONFIG_)) == 0) - dialog_input += strlen(CONFIG_); - - sym_arr = sym_re_search(dialog_input); - res = get_relations_str(sym_arr, NULL); - free(sym_arr); - show_scroll_win(main_window, - _("Search Results"), str_get(&res)); - str_free(&res); - str_free(&title); -} - - -static void build_conf(struct menu *menu) -{ - struct symbol *sym; - struct property *prop; - struct menu *child; - int type, tmp, doint = 2; - tristate val; - char ch; - - if (!menu || (!show_all_items && !menu_is_visible(menu))) - return; - - sym = menu->sym; - prop = menu->prompt; - if (!sym) { - if (prop && menu != current_menu) { - const char *prompt = menu_get_prompt(menu); - enum prop_type ptype; - ptype = menu->prompt ? menu->prompt->type : P_UNKNOWN; - switch (ptype) { - case P_MENU: - child_count++; - prompt = _(prompt); - if (single_menu_mode) { - item_make(menu, 'm', - "%s%*c%s", - menu->data ? "-->" : "++>", - indent + 1, ' ', prompt); - } else - item_make(menu, 'm', - " %*c%s %s", - indent + 1, ' ', prompt, - menu_is_empty(menu) ? "----" : "--->"); - - if (single_menu_mode && menu->data) - goto conf_childs; - return; - case P_COMMENT: - if (prompt) { - child_count++; - item_make(menu, ':', - " %*c*** %s ***", - indent + 1, ' ', - _(prompt)); - } - break; - default: - if (prompt) { - child_count++; - item_make(menu, ':', "---%*c%s", - indent + 1, ' ', - _(prompt)); - } - } - } else - doint = 0; - goto conf_childs; - } - - type = sym_get_type(sym); - if (sym_is_choice(sym)) { - struct symbol *def_sym = sym_get_choice_value(sym); - struct menu *def_menu = NULL; - - child_count++; - for (child = menu->list; child; child = child->next) { - if (menu_is_visible(child) && child->sym == def_sym) - def_menu = child; - } - - val = sym_get_tristate_value(sym); - if (sym_is_changable(sym)) { - switch (type) { - case S_BOOLEAN: - item_make(menu, 't', "[%c]", - val == no ? ' ' : '*'); - break; - case S_TRISTATE: - switch (val) { - case yes: - ch = '*'; - break; - case mod: - ch = 'M'; - break; - default: - ch = ' '; - break; - } - item_make(menu, 't', "<%c>", ch); - break; - } - } else { - item_make(menu, def_menu ? 't' : ':', " "); - } - - item_add_str("%*c%s", indent + 1, - ' ', _(menu_get_prompt(menu))); - if (val == yes) { - if (def_menu) { - item_add_str(" (%s)", - _(menu_get_prompt(def_menu))); - item_add_str(" --->"); - if (def_menu->list) { - indent += 2; - build_conf(def_menu); - indent -= 2; - } - } - return; - } - } else { - if (menu == current_menu) { - item_make(menu, ':', - "---%*c%s", indent + 1, - ' ', _(menu_get_prompt(menu))); - goto conf_childs; - } - child_count++; - val = sym_get_tristate_value(sym); - if (sym_is_choice_value(sym) && val == yes) { - item_make(menu, ':', " "); - } else { - switch (type) { - case S_BOOLEAN: - if (sym_is_changable(sym)) - item_make(menu, 't', "[%c]", - val == no ? ' ' : '*'); - else - item_make(menu, 't', "-%c-", - val == no ? ' ' : '*'); - break; - case S_TRISTATE: - switch (val) { - case yes: - ch = '*'; - break; - case mod: - ch = 'M'; - break; - default: - ch = ' '; - break; - } - if (sym_is_changable(sym)) { - if (sym->rev_dep.tri == mod) - item_make(menu, - 't', "{%c}", ch); - else - item_make(menu, - 't', "<%c>", ch); - } else - item_make(menu, 't', "-%c-", ch); - break; - default: - tmp = 2 + strlen(sym_get_string_value(sym)); - item_make(menu, 's', " (%s)", - sym_get_string_value(sym)); - tmp = indent - tmp + 4; - if (tmp < 0) - tmp = 0; - item_add_str("%*c%s%s", tmp, ' ', - _(menu_get_prompt(menu)), - (sym_has_value(sym) || - !sym_is_changable(sym)) ? "" : - _(" (NEW)")); - goto conf_childs; - } - } - item_add_str("%*c%s%s", indent + 1, ' ', - _(menu_get_prompt(menu)), - (sym_has_value(sym) || !sym_is_changable(sym)) ? - "" : _(" (NEW)")); - if (menu->prompt && menu->prompt->type == P_MENU) { - item_add_str(" %s", menu_is_empty(menu) ? "----" : "--->"); - return; - } - } - -conf_childs: - indent += doint; - for (child = menu->list; child; child = child->next) - build_conf(child); - indent -= doint; -} - -static void reset_menu(void) -{ - unpost_menu(curses_menu); - clean_items(); -} - -/* adjust the menu to show this item. - * prefer not to scroll the menu if possible*/ -static void center_item(int selected_index, int *last_top_row) -{ - int toprow; - - set_top_row(curses_menu, *last_top_row); - toprow = top_row(curses_menu); - if (selected_index < toprow || - selected_index >= toprow+mwin_max_lines) { - toprow = max(selected_index-mwin_max_lines/2, 0); - if (toprow >= item_count(curses_menu)-mwin_max_lines) - toprow = item_count(curses_menu)-mwin_max_lines; - set_top_row(curses_menu, toprow); - } - set_current_item(curses_menu, - curses_menu_items[selected_index]); - *last_top_row = toprow; - post_menu(curses_menu); - refresh_all_windows(main_window); -} - -/* this function assumes reset_menu has been called before */ -static void show_menu(const char *prompt, const char *instructions, - int selected_index, int *last_top_row) -{ - int maxx, maxy; - WINDOW *menu_window; - - current_instructions = instructions; - - clear(); - (void) wattrset(main_window, attributes[NORMAL]); - print_in_middle(stdscr, 1, 0, getmaxx(stdscr), - menu_backtitle, - attributes[MAIN_HEADING]); - - (void) wattrset(main_window, attributes[MAIN_MENU_BOX]); - box(main_window, 0, 0); - (void) wattrset(main_window, attributes[MAIN_MENU_HEADING]); - mvwprintw(main_window, 0, 3, " %s ", prompt); - (void) wattrset(main_window, attributes[NORMAL]); - - set_menu_items(curses_menu, curses_menu_items); - - /* position the menu at the middle of the screen */ - scale_menu(curses_menu, &maxy, &maxx); - maxx = min(maxx, mwin_max_cols-2); - maxy = mwin_max_lines; - menu_window = derwin(main_window, - maxy, - maxx, - 2, - (mwin_max_cols-maxx)/2); - keypad(menu_window, TRUE); - set_menu_win(curses_menu, menu_window); - set_menu_sub(curses_menu, menu_window); - - /* must reassert this after changing items, otherwise returns to a - * default of 16 - */ - set_menu_format(curses_menu, maxy, 1); - center_item(selected_index, last_top_row); - set_menu_format(curses_menu, maxy, 1); - - print_function_line(); - - /* Post the menu */ - post_menu(curses_menu); - refresh_all_windows(main_window); -} - -static void adj_match_dir(match_f *match_direction) -{ - if (*match_direction == FIND_NEXT_MATCH_DOWN) - *match_direction = - MATCH_TINKER_PATTERN_DOWN; - else if (*match_direction == FIND_NEXT_MATCH_UP) - *match_direction = - MATCH_TINKER_PATTERN_UP; - /* else, do no change.. */ -} - -struct match_state -{ - int in_search; - match_f match_direction; - char pattern[256]; -}; - -/* Return 0 means I have handled the key. In such a case, ans should hold the - * item to center, or -1 otherwise. - * Else return -1 . - */ -static int do_match(int key, struct match_state *state, int *ans) -{ - char c = (char) key; - int terminate_search = 0; - *ans = -1; - if (key == '/' || (state->in_search && key == 27)) { - move(0, 0); - refresh(); - clrtoeol(); - state->in_search = 1-state->in_search; - bzero(state->pattern, sizeof(state->pattern)); - state->match_direction = MATCH_TINKER_PATTERN_DOWN; - return 0; - } else if (!state->in_search) - return 1; - - if (isalnum(c) || isgraph(c) || c == ' ') { - state->pattern[strlen(state->pattern)] = c; - state->pattern[strlen(state->pattern)] = '\0'; - adj_match_dir(&state->match_direction); - *ans = get_mext_match(state->pattern, - state->match_direction); - } else if (key == KEY_DOWN) { - state->match_direction = FIND_NEXT_MATCH_DOWN; - *ans = get_mext_match(state->pattern, - state->match_direction); - } else if (key == KEY_UP) { - state->match_direction = FIND_NEXT_MATCH_UP; - *ans = get_mext_match(state->pattern, - state->match_direction); - } else if (key == KEY_BACKSPACE || key == 127) { - state->pattern[strlen(state->pattern)-1] = '\0'; - adj_match_dir(&state->match_direction); - } else - terminate_search = 1; - - if (terminate_search) { - state->in_search = 0; - bzero(state->pattern, sizeof(state->pattern)); - move(0, 0); - refresh(); - clrtoeol(); - return -1; - } - return 0; -} - -static void conf(struct menu *menu) -{ - struct menu *submenu = 0; - const char *prompt = menu_get_prompt(menu); - struct symbol *sym; - int res; - int current_index = 0; - int last_top_row = 0; - struct match_state match_state = { - .in_search = 0, - .match_direction = MATCH_TINKER_PATTERN_DOWN, - .pattern = "", - }; - - while (!global_exit) { - reset_menu(); - current_menu = menu; - build_conf(menu); - if (!child_count) - break; - - show_menu(prompt ? _(prompt) : _("Main Menu"), - _(menu_instructions), - current_index, &last_top_row); - keypad((menu_win(curses_menu)), TRUE); - while (!global_exit) { - if (match_state.in_search) { - mvprintw(0, 0, - "searching: %s", match_state.pattern); - clrtoeol(); - } - refresh_all_windows(main_window); - res = wgetch(menu_win(curses_menu)); - if (!res) - break; - if (do_match(res, &match_state, ¤t_index) == 0) { - if (current_index != -1) - center_item(current_index, - &last_top_row); - continue; - } - if (process_special_keys(&res, - (struct menu *) item_data())) - break; - switch (res) { - case KEY_DOWN: - menu_driver(curses_menu, REQ_DOWN_ITEM); - break; - case KEY_UP: - menu_driver(curses_menu, REQ_UP_ITEM); - break; - case KEY_NPAGE: - menu_driver(curses_menu, REQ_SCR_DPAGE); - break; - case KEY_PPAGE: - menu_driver(curses_menu, REQ_SCR_UPAGE); - break; - case KEY_HOME: - menu_driver(curses_menu, REQ_FIRST_ITEM); - break; - case KEY_END: - menu_driver(curses_menu, REQ_LAST_ITEM); - break; - case 'h': - case '?': - show_help((struct menu *) item_data()); - break; - } - if (res == 10 || res == 27 || - res == 32 || res == 'n' || res == 'y' || - res == KEY_LEFT || res == KEY_RIGHT || - res == 'm') - break; - refresh_all_windows(main_window); - } - - refresh_all_windows(main_window); - /* if ESC or left*/ - if (res == 27 || (menu != &rootmenu && res == KEY_LEFT)) - break; - - /* remember location in the menu */ - last_top_row = top_row(curses_menu); - current_index = curses_item_index(); - - if (!item_tag()) - continue; - - submenu = (struct menu *) item_data(); - if (!submenu || !menu_is_visible(submenu)) - continue; - sym = submenu->sym; - - switch (res) { - case ' ': - if (item_is_tag('t')) - sym_toggle_tristate_value(sym); - else if (item_is_tag('m')) - conf(submenu); - break; - case KEY_RIGHT: - case 10: /* ENTER WAS PRESSED */ - switch (item_tag()) { - case 'm': - if (single_menu_mode) - submenu->data = - (void *) (long) !submenu->data; - else - conf(submenu); - break; - case 't': - if (sym_is_choice(sym) && - sym_get_tristate_value(sym) == yes) - conf_choice(submenu); - else if (submenu->prompt && - submenu->prompt->type == P_MENU) - conf(submenu); - else if (res == 10) - sym_toggle_tristate_value(sym); - break; - case 's': - conf_string(submenu); - break; - } - break; - case 'y': - if (item_is_tag('t')) { - if (sym_set_tristate_value(sym, yes)) - break; - if (sym_set_tristate_value(sym, mod)) - btn_dialog(main_window, setmod_text, 0); - } - break; - case 'n': - if (item_is_tag('t')) - sym_set_tristate_value(sym, no); - break; - case 'm': - if (item_is_tag('t')) - sym_set_tristate_value(sym, mod); - break; - } - } -} - -static void conf_message_callback(const char *fmt, va_list ap) -{ - char buf[1024]; - - vsnprintf(buf, sizeof(buf), fmt, ap); - btn_dialog(main_window, buf, 1, "<OK>"); -} - -static void show_help(struct menu *menu) -{ - struct gstr help; - - if (!menu) - return; - - help = str_new(); - menu_get_ext_help(menu, &help); - show_scroll_win(main_window, _(menu_get_prompt(menu)), str_get(&help)); - str_free(&help); -} - -static void conf_choice(struct menu *menu) -{ - const char *prompt = _(menu_get_prompt(menu)); - struct menu *child = 0; - struct symbol *active; - int selected_index = 0; - int last_top_row = 0; - int res, i = 0; - struct match_state match_state = { - .in_search = 0, - .match_direction = MATCH_TINKER_PATTERN_DOWN, - .pattern = "", - }; - - active = sym_get_choice_value(menu->sym); - /* this is mostly duplicated from the conf() function. */ - while (!global_exit) { - reset_menu(); - - for (i = 0, child = menu->list; child; child = child->next) { - if (!show_all_items && !menu_is_visible(child)) - continue; - - if (child->sym == sym_get_choice_value(menu->sym)) - item_make(child, ':', "<X> %s", - _(menu_get_prompt(child))); - else if (child->sym) - item_make(child, ':', " %s", - _(menu_get_prompt(child))); - else - item_make(child, ':', "*** %s ***", - _(menu_get_prompt(child))); - - if (child->sym == active){ - last_top_row = top_row(curses_menu); - selected_index = i; - } - i++; - } - show_menu(prompt ? _(prompt) : _("Choice Menu"), - _(radiolist_instructions), - selected_index, - &last_top_row); - while (!global_exit) { - if (match_state.in_search) { - mvprintw(0, 0, "searching: %s", - match_state.pattern); - clrtoeol(); - } - refresh_all_windows(main_window); - res = wgetch(menu_win(curses_menu)); - if (!res) - break; - if (do_match(res, &match_state, &selected_index) == 0) { - if (selected_index != -1) - center_item(selected_index, - &last_top_row); - continue; - } - if (process_special_keys( - &res, - (struct menu *) item_data())) - break; - switch (res) { - case KEY_DOWN: - menu_driver(curses_menu, REQ_DOWN_ITEM); - break; - case KEY_UP: - menu_driver(curses_menu, REQ_UP_ITEM); - break; - case KEY_NPAGE: - menu_driver(curses_menu, REQ_SCR_DPAGE); - break; - case KEY_PPAGE: - menu_driver(curses_menu, REQ_SCR_UPAGE); - break; - case KEY_HOME: - menu_driver(curses_menu, REQ_FIRST_ITEM); - break; - case KEY_END: - menu_driver(curses_menu, REQ_LAST_ITEM); - break; - case 'h': - case '?': - show_help((struct menu *) item_data()); - break; - } - if (res == 10 || res == 27 || res == ' ' || - res == KEY_LEFT){ - break; - } - refresh_all_windows(main_window); - } - /* if ESC or left */ - if (res == 27 || res == KEY_LEFT) - break; - - child = item_data(); - if (!child || !menu_is_visible(child) || !child->sym) - continue; - switch (res) { - case ' ': - case 10: - case KEY_RIGHT: - sym_set_tristate_value(child->sym, yes); - return; - case 'h': - case '?': - show_help(child); - active = child->sym; - break; - case KEY_EXIT: - return; - } - } -} - -static void conf_string(struct menu *menu) -{ - const char *prompt = menu_get_prompt(menu); - - while (1) { - int res; - const char *heading; - - switch (sym_get_type(menu->sym)) { - case S_INT: - heading = _(inputbox_instructions_int); - break; - case S_HEX: - heading = _(inputbox_instructions_hex); - break; - case S_STRING: - heading = _(inputbox_instructions_string); - break; - default: - heading = _("Internal nconf error!"); - } - res = dialog_inputbox(main_window, - prompt ? _(prompt) : _("Main Menu"), - heading, - sym_get_string_value(menu->sym), - &dialog_input_result, - &dialog_input_result_len); - switch (res) { - case 0: - if (sym_set_string_value(menu->sym, - dialog_input_result)) - return; - btn_dialog(main_window, - _("You have made an invalid entry."), 0); - break; - case 1: - show_help(menu); - break; - case KEY_EXIT: - return; - } - } -} - -static void conf_load(void) -{ - while (1) { - int res; - res = dialog_inputbox(main_window, - NULL, load_config_text, - filename, - &dialog_input_result, - &dialog_input_result_len); - switch (res) { - case 0: - if (!dialog_input_result[0]) - return; - if (!conf_read(dialog_input_result)) { - set_config_filename(dialog_input_result); - sym_set_change_count(1); - return; - } - btn_dialog(main_window, _("File does not exist!"), 0); - break; - case 1: - show_scroll_win(main_window, - _("Load Alternate Configuration"), - load_config_help); - break; - case KEY_EXIT: - return; - } - } -} - -static void conf_save(void) -{ - while (1) { - int res; - res = dialog_inputbox(main_window, - NULL, save_config_text, - filename, - &dialog_input_result, - &dialog_input_result_len); - switch (res) { - case 0: - if (!dialog_input_result[0]) - return; - res = conf_write(dialog_input_result); - if (!res) { - set_config_filename(dialog_input_result); - return; - } - btn_dialog(main_window, _("Can't create file! " - "Probably a nonexistent directory."), - 1, "<OK>"); - break; - case 1: - show_scroll_win(main_window, - _("Save Alternate Configuration"), - save_config_help); - break; - case KEY_EXIT: - return; - } - } -} - -void setup_windows(void) -{ - int lines, columns; - - getmaxyx(stdscr, lines, columns); - - if (main_window != NULL) - delwin(main_window); - - /* set up the menu and menu window */ - main_window = newwin(lines-2, columns-2, 2, 1); - keypad(main_window, TRUE); - mwin_max_lines = lines-7; - mwin_max_cols = columns-6; - - /* panels order is from bottom to top */ - new_panel(main_window); -} - -int main(int ac, char **av) -{ - int lines, columns; - char *mode; - - setlocale(LC_ALL, ""); - bindtextdomain(PACKAGE, LOCALEDIR); - textdomain(PACKAGE); - - conf_parse(av[1]); - conf_read(NULL); - - mode = getenv("NCONFIG_MODE"); - if (mode) { - if (!strcasecmp(mode, "single_menu")) - single_menu_mode = 1; - } - - /* Initialize curses */ - initscr(); - /* set color theme */ - set_colors(); - - cbreak(); - noecho(); - keypad(stdscr, TRUE); - curs_set(0); - - getmaxyx(stdscr, lines, columns); - if (columns < 75 || lines < 20) { - endwin(); - printf("Your terminal should have at " - "least 20 lines and 75 columns\n"); - return 1; - } - - notimeout(stdscr, FALSE); -#if NCURSES_REENTRANT - set_escdelay(1); -#else - ESCDELAY = 1; -#endif - - /* set btns menu */ - curses_menu = new_menu(curses_menu_items); - menu_opts_off(curses_menu, O_SHOWDESC); - menu_opts_on(curses_menu, O_SHOWMATCH); - menu_opts_on(curses_menu, O_ONEVALUE); - menu_opts_on(curses_menu, O_NONCYCLIC); - menu_opts_on(curses_menu, O_IGNORECASE); - set_menu_mark(curses_menu, " "); - set_menu_fore(curses_menu, attributes[MAIN_MENU_FORE]); - set_menu_back(curses_menu, attributes[MAIN_MENU_BACK]); - set_menu_grey(curses_menu, attributes[MAIN_MENU_GREY]); - - set_config_filename(conf_get_configname()); - setup_windows(); - - /* check for KEY_FUNC(1) */ - if (has_key(KEY_F(1)) == FALSE) { - show_scroll_win(main_window, - _("Instructions"), - _(menu_no_f_instructions)); - } - - conf_set_message_callback(conf_message_callback); - /* do the work */ - while (!global_exit) { - conf(&rootmenu); - if (!global_exit && do_exit() == 0) - break; - } - /* ok, we are done */ - unpost_menu(curses_menu); - free_menu(curses_menu); - delwin(main_window); - clear(); - refresh(); - endwin(); - return 0; -} diff --git a/payloads/external/SeaBIOS/scripts/kconfig/nconf.gui.c b/payloads/external/SeaBIOS/scripts/kconfig/nconf.gui.c deleted file mode 100644 index 8275f0e5..00000000 --- a/payloads/external/SeaBIOS/scripts/kconfig/nconf.gui.c +++ /dev/null @@ -1,656 +0,0 @@ -/* - * Copyright (C) 2008 Nir Tzachar <nir.tzachar@gmail.com? - * Released under the terms of the GNU GPL v2.0. - * - * Derived from menuconfig. - * - */ -#include "nconf.h" - -/* a list of all the different widgets we use */ -attributes_t attributes[ATTR_MAX+1] = {0}; - -/* available colors: - COLOR_BLACK 0 - COLOR_RED 1 - COLOR_GREEN 2 - COLOR_YELLOW 3 - COLOR_BLUE 4 - COLOR_MAGENTA 5 - COLOR_CYAN 6 - COLOR_WHITE 7 - */ -static void set_normal_colors(void) -{ - init_pair(NORMAL, -1, -1); - init_pair(MAIN_HEADING, COLOR_MAGENTA, -1); - - /* FORE is for the selected item */ - init_pair(MAIN_MENU_FORE, -1, -1); - /* BACK for all the rest */ - init_pair(MAIN_MENU_BACK, -1, -1); - init_pair(MAIN_MENU_GREY, -1, -1); - init_pair(MAIN_MENU_HEADING, COLOR_GREEN, -1); - init_pair(MAIN_MENU_BOX, COLOR_YELLOW, -1); - - init_pair(SCROLLWIN_TEXT, -1, -1); - init_pair(SCROLLWIN_HEADING, COLOR_GREEN, -1); - init_pair(SCROLLWIN_BOX, COLOR_YELLOW, -1); - - init_pair(DIALOG_TEXT, -1, -1); - init_pair(DIALOG_BOX, COLOR_YELLOW, -1); - init_pair(DIALOG_MENU_BACK, COLOR_YELLOW, -1); - init_pair(DIALOG_MENU_FORE, COLOR_RED, -1); - - init_pair(INPUT_BOX, COLOR_YELLOW, -1); - init_pair(INPUT_HEADING, COLOR_GREEN, -1); - init_pair(INPUT_TEXT, -1, -1); - init_pair(INPUT_FIELD, -1, -1); - - init_pair(FUNCTION_HIGHLIGHT, -1, -1); - init_pair(FUNCTION_TEXT, COLOR_YELLOW, -1); -} - -/* available attributes: - A_NORMAL Normal display (no highlight) - A_STANDOUT Best highlighting mode of the terminal. - A_UNDERLINE Underlining - A_REVERSE Reverse video - A_BLINK Blinking - A_DIM Half bright - A_BOLD Extra bright or bold - A_PROTECT Protected mode - A_INVIS Invisible or blank mode - A_ALTCHARSET Alternate character set - A_CHARTEXT Bit-mask to extract a character - COLOR_PAIR(n) Color-pair number n - */ -static void normal_color_theme(void) -{ - /* automatically add color... */ -#define mkattr(name, attr) do { \ -attributes[name] = attr | COLOR_PAIR(name); } while (0) - mkattr(NORMAL, NORMAL); - mkattr(MAIN_HEADING, A_BOLD | A_UNDERLINE); - - mkattr(MAIN_MENU_FORE, A_REVERSE); - mkattr(MAIN_MENU_BACK, A_NORMAL); - mkattr(MAIN_MENU_GREY, A_NORMAL); - mkattr(MAIN_MENU_HEADING, A_BOLD); - mkattr(MAIN_MENU_BOX, A_NORMAL); - - mkattr(SCROLLWIN_TEXT, A_NORMAL); - mkattr(SCROLLWIN_HEADING, A_BOLD); - mkattr(SCROLLWIN_BOX, A_BOLD); - - mkattr(DIALOG_TEXT, A_BOLD); - mkattr(DIALOG_BOX, A_BOLD); - mkattr(DIALOG_MENU_FORE, A_STANDOUT); - mkattr(DIALOG_MENU_BACK, A_NORMAL); - - mkattr(INPUT_BOX, A_NORMAL); - mkattr(INPUT_HEADING, A_BOLD); - mkattr(INPUT_TEXT, A_NORMAL); - mkattr(INPUT_FIELD, A_UNDERLINE); - - mkattr(FUNCTION_HIGHLIGHT, A_BOLD); - mkattr(FUNCTION_TEXT, A_REVERSE); -} - -static void no_colors_theme(void) -{ - /* automatically add highlight, no color */ -#define mkattrn(name, attr) { attributes[name] = attr; } - - mkattrn(NORMAL, NORMAL); - mkattrn(MAIN_HEADING, A_BOLD | A_UNDERLINE); - - mkattrn(MAIN_MENU_FORE, A_STANDOUT); - mkattrn(MAIN_MENU_BACK, A_NORMAL); - mkattrn(MAIN_MENU_GREY, A_NORMAL); - mkattrn(MAIN_MENU_HEADING, A_BOLD); - mkattrn(MAIN_MENU_BOX, A_NORMAL); - - mkattrn(SCROLLWIN_TEXT, A_NORMAL); - mkattrn(SCROLLWIN_HEADING, A_BOLD); - mkattrn(SCROLLWIN_BOX, A_BOLD); - - mkattrn(DIALOG_TEXT, A_NORMAL); - mkattrn(DIALOG_BOX, A_BOLD); - mkattrn(DIALOG_MENU_FORE, A_STANDOUT); - mkattrn(DIALOG_MENU_BACK, A_NORMAL); - - mkattrn(INPUT_BOX, A_BOLD); - mkattrn(INPUT_HEADING, A_BOLD); - mkattrn(INPUT_TEXT, A_NORMAL); - mkattrn(INPUT_FIELD, A_UNDERLINE); - - mkattrn(FUNCTION_HIGHLIGHT, A_BOLD); - mkattrn(FUNCTION_TEXT, A_REVERSE); -} - -void set_colors() -{ - start_color(); - use_default_colors(); - set_normal_colors(); - if (has_colors()) { - normal_color_theme(); - } else { - /* give defaults */ - no_colors_theme(); - } -} - - -/* this changes the windows attributes !!! */ -void print_in_middle(WINDOW *win, - int starty, - int startx, - int width, - const char *string, - chtype color) -{ int length, x, y; - float temp; - - - if (win == NULL) - win = stdscr; - getyx(win, y, x); - if (startx != 0) - x = startx; - if (starty != 0) - y = starty; - if (width == 0) - width = 80; - - length = strlen(string); - temp = (width - length) / 2; - x = startx + (int)temp; - (void) wattrset(win, color); - mvwprintw(win, y, x, "%s", string); - refresh(); -} - -int get_line_no(const char *text) -{ - int i; - int total = 1; - - if (!text) - return 0; - - for (i = 0; text[i] != '\0'; i++) - if (text[i] == '\n') - total++; - return total; -} - -const char *get_line(const char *text, int line_no) -{ - int i; - int lines = 0; - - if (!text) - return 0; - - for (i = 0; text[i] != '\0' && lines < line_no; i++) - if (text[i] == '\n') - lines++; - return text+i; -} - -int get_line_length(const char *line) -{ - int res = 0; - while (*line != '\0' && *line != '\n') { - line++; - res++; - } - return res; -} - -/* print all lines to the window. */ -void fill_window(WINDOW *win, const char *text) -{ - int x, y; - int total_lines = get_line_no(text); - int i; - - getmaxyx(win, y, x); - /* do not go over end of line */ - total_lines = min(total_lines, y); - for (i = 0; i < total_lines; i++) { - char tmp[x+10]; - const char *line = get_line(text, i); - int len = get_line_length(line); - strncpy(tmp, line, min(len, x)); - tmp[len] = '\0'; - mvwprintw(win, i, 0, "%s", tmp); - } -} - -/* get the message, and buttons. - * each button must be a char* - * return the selected button - * - * this dialog is used for 2 different things: - * 1) show a text box, no buttons. - * 2) show a dialog, with horizontal buttons - */ -int btn_dialog(WINDOW *main_window, const char *msg, int btn_num, ...) -{ - va_list ap; - char *btn; - int btns_width = 0; - int msg_lines = 0; - int msg_width = 0; - int total_width; - int win_rows = 0; - WINDOW *win; - WINDOW *msg_win; - WINDOW *menu_win; - MENU *menu; - ITEM *btns[btn_num+1]; - int i, x, y; - int res = -1; - - - va_start(ap, btn_num); - for (i = 0; i < btn_num; i++) { - btn = va_arg(ap, char *); - btns[i] = new_item(btn, ""); - btns_width += strlen(btn)+1; - } - va_end(ap); - btns[btn_num] = NULL; - - /* find the widest line of msg: */ - msg_lines = get_line_no(msg); - for (i = 0; i < msg_lines; i++) { - const char *line = get_line(msg, i); - int len = get_line_length(line); - if (msg_width < len) - msg_width = len; - } - - total_width = max(msg_width, btns_width); - /* place dialog in middle of screen */ - y = (getmaxy(stdscr)-(msg_lines+4))/2; - x = (getmaxx(stdscr)-(total_width+4))/2; - - - /* create the windows */ - if (btn_num > 0) - win_rows = msg_lines+4; - else - win_rows = msg_lines+2; - - win = newwin(win_rows, total_width+4, y, x); - keypad(win, TRUE); - menu_win = derwin(win, 1, btns_width, win_rows-2, - 1+(total_width+2-btns_width)/2); - menu = new_menu(btns); - msg_win = derwin(win, win_rows-2, msg_width, 1, - 1+(total_width+2-msg_width)/2); - - set_menu_fore(menu, attributes[DIALOG_MENU_FORE]); - set_menu_back(menu, attributes[DIALOG_MENU_BACK]); - - (void) wattrset(win, attributes[DIALOG_BOX]); - box(win, 0, 0); - - /* print message */ - (void) wattrset(msg_win, attributes[DIALOG_TEXT]); - fill_window(msg_win, msg); - - set_menu_win(menu, win); - set_menu_sub(menu, menu_win); - set_menu_format(menu, 1, btn_num); - menu_opts_off(menu, O_SHOWDESC); - menu_opts_off(menu, O_SHOWMATCH); - menu_opts_on(menu, O_ONEVALUE); - menu_opts_on(menu, O_NONCYCLIC); - set_menu_mark(menu, ""); - post_menu(menu); - - - touchwin(win); - refresh_all_windows(main_window); - while ((res = wgetch(win))) { - switch (res) { - case KEY_LEFT: - menu_driver(menu, REQ_LEFT_ITEM); - break; - case KEY_RIGHT: - menu_driver(menu, REQ_RIGHT_ITEM); - break; - case 10: /* ENTER */ - case 27: /* ESCAPE */ - case ' ': - case KEY_F(F_BACK): - case KEY_F(F_EXIT): - break; - } - touchwin(win); - refresh_all_windows(main_window); - - if (res == 10 || res == ' ') { - res = item_index(current_item(menu)); - break; - } else if (res == 27 || res == KEY_F(F_BACK) || - res == KEY_F(F_EXIT)) { - res = KEY_EXIT; - break; - } - } - - unpost_menu(menu); - free_menu(menu); - for (i = 0; i < btn_num; i++) - free_item(btns[i]); - - delwin(win); - return res; -} - -int dialog_inputbox(WINDOW *main_window, - const char *title, const char *prompt, - const char *init, char **resultp, int *result_len) -{ - int prompt_lines = 0; - int prompt_width = 0; - WINDOW *win; - WINDOW *prompt_win; - WINDOW *form_win; - PANEL *panel; - int i, x, y; - int res = -1; - int cursor_position = strlen(init); - int cursor_form_win; - char *result = *resultp; - - if (strlen(init)+1 > *result_len) { - *result_len = strlen(init)+1; - *resultp = result = realloc(result, *result_len); - } - - /* find the widest line of msg: */ - prompt_lines = get_line_no(prompt); - for (i = 0; i < prompt_lines; i++) { - const char *line = get_line(prompt, i); - int len = get_line_length(line); - prompt_width = max(prompt_width, len); - } - - if (title) - prompt_width = max(prompt_width, strlen(title)); - - /* place dialog in middle of screen */ - y = (getmaxy(stdscr)-(prompt_lines+4))/2; - x = (getmaxx(stdscr)-(prompt_width+4))/2; - - strncpy(result, init, *result_len); - - /* create the windows */ - win = newwin(prompt_lines+6, prompt_width+7, y, x); - prompt_win = derwin(win, prompt_lines+1, prompt_width, 2, 2); - form_win = derwin(win, 1, prompt_width, prompt_lines+3, 2); - keypad(form_win, TRUE); - - (void) wattrset(form_win, attributes[INPUT_FIELD]); - - (void) wattrset(win, attributes[INPUT_BOX]); - box(win, 0, 0); - (void) wattrset(win, attributes[INPUT_HEADING]); - if (title) - mvwprintw(win, 0, 3, "%s", title); - - /* print message */ - (void) wattrset(prompt_win, attributes[INPUT_TEXT]); - fill_window(prompt_win, prompt); - - mvwprintw(form_win, 0, 0, "%*s", prompt_width, " "); - cursor_form_win = min(cursor_position, prompt_width-1); - mvwprintw(form_win, 0, 0, "%s", - result + cursor_position-cursor_form_win); - - /* create panels */ - panel = new_panel(win); - - /* show the cursor */ - curs_set(1); - - touchwin(win); - refresh_all_windows(main_window); - while ((res = wgetch(form_win))) { - int len = strlen(result); - switch (res) { - case 10: /* ENTER */ - case 27: /* ESCAPE */ - case KEY_F(F_HELP): - case KEY_F(F_EXIT): - case KEY_F(F_BACK): - break; - case 127: - case KEY_BACKSPACE: - if (cursor_position > 0) { - memmove(&result[cursor_position-1], - &result[cursor_position], - len-cursor_position+1); - cursor_position--; - cursor_form_win--; - len--; - } - break; - case KEY_DC: - if (cursor_position >= 0 && cursor_position < len) { - memmove(&result[cursor_position], - &result[cursor_position+1], - len-cursor_position+1); - len--; - } - break; - case KEY_UP: - case KEY_RIGHT: - if (cursor_position < len) { - cursor_position++; - cursor_form_win++; - } - break; - case KEY_DOWN: - case KEY_LEFT: - if (cursor_position > 0) { - cursor_position--; - cursor_form_win--; - } - break; - case KEY_HOME: - cursor_position = 0; - cursor_form_win = 0; - break; - case KEY_END: - cursor_position = len; - cursor_form_win = min(cursor_position, prompt_width-1); - break; - default: - if ((isgraph(res) || isspace(res))) { - /* one for new char, one for '\0' */ - if (len+2 > *result_len) { - *result_len = len+2; - *resultp = result = realloc(result, - *result_len); - } - /* insert the char at the proper position */ - memmove(&result[cursor_position+1], - &result[cursor_position], - len-cursor_position+1); - result[cursor_position] = res; - cursor_position++; - cursor_form_win++; - len++; - } else { - mvprintw(0, 0, "unknown key: %d\n", res); - } - break; - } - if (cursor_form_win < 0) - cursor_form_win = 0; - else if (cursor_form_win > prompt_width-1) - cursor_form_win = prompt_width-1; - - wmove(form_win, 0, 0); - wclrtoeol(form_win); - mvwprintw(form_win, 0, 0, "%*s", prompt_width, " "); - mvwprintw(form_win, 0, 0, "%s", - result + cursor_position-cursor_form_win); - wmove(form_win, 0, cursor_form_win); - touchwin(win); - refresh_all_windows(main_window); - - if (res == 10) { - res = 0; - break; - } else if (res == 27 || res == KEY_F(F_BACK) || - res == KEY_F(F_EXIT)) { - res = KEY_EXIT; - break; - } else if (res == KEY_F(F_HELP)) { - res = 1; - break; - } - } - - /* hide the cursor */ - curs_set(0); - del_panel(panel); - delwin(prompt_win); - delwin(form_win); - delwin(win); - return res; -} - -/* refresh all windows in the correct order */ -void refresh_all_windows(WINDOW *main_window) -{ - update_panels(); - touchwin(main_window); - refresh(); -} - -/* layman's scrollable window... */ -void show_scroll_win(WINDOW *main_window, - const char *title, - const char *text) -{ - int res; - int total_lines = get_line_no(text); - int x, y, lines, columns; - int start_x = 0, start_y = 0; - int text_lines = 0, text_cols = 0; - int total_cols = 0; - int win_cols = 0; - int win_lines = 0; - int i = 0; - WINDOW *win; - WINDOW *pad; - PANEL *panel; - - getmaxyx(stdscr, lines, columns); - - /* find the widest line of msg: */ - total_lines = get_line_no(text); - for (i = 0; i < total_lines; i++) { - const char *line = get_line(text, i); - int len = get_line_length(line); - total_cols = max(total_cols, len+2); - } - - /* create the pad */ - pad = newpad(total_lines+10, total_cols+10); - (void) wattrset(pad, attributes[SCROLLWIN_TEXT]); - fill_window(pad, text); - - win_lines = min(total_lines+4, lines-2); - win_cols = min(total_cols+2, columns-2); - text_lines = max(win_lines-4, 0); - text_cols = max(win_cols-2, 0); - - /* place window in middle of screen */ - y = (lines-win_lines)/2; - x = (columns-win_cols)/2; - - win = newwin(win_lines, win_cols, y, x); - keypad(win, TRUE); - /* show the help in the help window, and show the help panel */ - (void) wattrset(win, attributes[SCROLLWIN_BOX]); - box(win, 0, 0); - (void) wattrset(win, attributes[SCROLLWIN_HEADING]); - mvwprintw(win, 0, 3, " %s ", title); - panel = new_panel(win); - - /* handle scrolling */ - do { - - copywin(pad, win, start_y, start_x, 2, 2, text_lines, - text_cols, 0); - print_in_middle(win, - text_lines+2, - 0, - text_cols, - "<OK>", - attributes[DIALOG_MENU_FORE]); - wrefresh(win); - - res = wgetch(win); - switch (res) { - case KEY_NPAGE: - case ' ': - case 'd': - start_y += text_lines-2; - break; - case KEY_PPAGE: - case 'u': - start_y -= text_lines+2; - break; - case KEY_HOME: - start_y = 0; - break; - case KEY_END: - start_y = total_lines-text_lines; - break; - case KEY_DOWN: - case 'j': - start_y++; - break; - case KEY_UP: - case 'k': - start_y--; - break; - case KEY_LEFT: - case 'h': - start_x--; - break; - case KEY_RIGHT: - case 'l': - start_x++; - break; - } - if (res == 10 || res == 27 || res == 'q' || - res == KEY_F(F_HELP) || res == KEY_F(F_BACK) || - res == KEY_F(F_EXIT)) - break; - if (start_y < 0) - start_y = 0; - if (start_y >= total_lines-text_lines) - start_y = total_lines-text_lines; - if (start_x < 0) - start_x = 0; - if (start_x >= total_cols-text_cols) - start_x = total_cols-text_cols; - } while (res); - - del_panel(panel); - delwin(win); - refresh_all_windows(main_window); -} diff --git a/payloads/external/SeaBIOS/scripts/kconfig/nconf.h b/payloads/external/SeaBIOS/scripts/kconfig/nconf.h deleted file mode 100644 index 0d526170..00000000 --- a/payloads/external/SeaBIOS/scripts/kconfig/nconf.h +++ /dev/null @@ -1,96 +0,0 @@ -/* - * Copyright (C) 2008 Nir Tzachar <nir.tzachar@gmail.com? - * Released under the terms of the GNU GPL v2.0. - * - * Derived from menuconfig. - * - */ - -#include <ctype.h> -#include <errno.h> -#include <fcntl.h> -#include <limits.h> -#include <stdarg.h> -#include <stdlib.h> -#include <string.h> -#include <unistd.h> -#include <locale.h> -#include <curses.h> -#include <menu.h> -#include <panel.h> -#include <form.h> - -#include <stdio.h> -#include <time.h> -#include <sys/time.h> - -#include "ncurses.h" - -#define max(a, b) ({\ - typeof(a) _a = a;\ - typeof(b) _b = b;\ - _a > _b ? _a : _b; }) - -#define min(a, b) ({\ - typeof(a) _a = a;\ - typeof(b) _b = b;\ - _a < _b ? _a : _b; }) - -typedef enum { - NORMAL = 1, - MAIN_HEADING, - MAIN_MENU_BOX, - MAIN_MENU_FORE, - MAIN_MENU_BACK, - MAIN_MENU_GREY, - MAIN_MENU_HEADING, - SCROLLWIN_TEXT, - SCROLLWIN_HEADING, - SCROLLWIN_BOX, - DIALOG_TEXT, - DIALOG_MENU_FORE, - DIALOG_MENU_BACK, - DIALOG_BOX, - INPUT_BOX, - INPUT_HEADING, - INPUT_TEXT, - INPUT_FIELD, - FUNCTION_TEXT, - FUNCTION_HIGHLIGHT, - ATTR_MAX -} attributes_t; -extern attributes_t attributes[]; - -typedef enum { - F_HELP = 1, - F_SYMBOL = 2, - F_INSTS = 3, - F_CONF = 4, - F_BACK = 5, - F_SAVE = 6, - F_LOAD = 7, - F_SEARCH = 8, - F_EXIT = 9, -} function_key; - -void set_colors(void); - -/* this changes the windows attributes !!! */ -void print_in_middle(WINDOW *win, - int starty, - int startx, - int width, - const char *string, - chtype color); -int get_line_length(const char *line); -int get_line_no(const char *text); -const char *get_line(const char *text, int line_no); -void fill_window(WINDOW *win, const char *text); -int btn_dialog(WINDOW *main_window, const char *msg, int btn_num, ...); -int dialog_inputbox(WINDOW *main_window, - const char *title, const char *prompt, - const char *init, char **resultp, int *result_len); -void refresh_all_windows(WINDOW *main_window); -void show_scroll_win(WINDOW *main_window, - const char *title, - const char *text); diff --git a/payloads/external/SeaBIOS/scripts/kconfig/qconf.cc b/payloads/external/SeaBIOS/scripts/kconfig/qconf.cc deleted file mode 100644 index 9d3b04b0..00000000 --- a/payloads/external/SeaBIOS/scripts/kconfig/qconf.cc +++ /dev/null @@ -1,1795 +0,0 @@ -/* - * Copyright (C) 2002 Roman Zippel <zippel@linux-m68k.org> - * Released under the terms of the GNU GPL v2.0. - */ - -#include <qglobal.h> - -#if QT_VERSION < 0x040000 -#include <stddef.h> -#include <qmainwindow.h> -#include <qvbox.h> -#include <qvaluelist.h> -#include <qtextbrowser.h> -#include <qaction.h> -#include <qheader.h> -#include <qfiledialog.h> -#include <qdragobject.h> -#include <qpopupmenu.h> -#else -#include <q3mainwindow.h> -#include <q3vbox.h> -#include <q3valuelist.h> -#include <q3textbrowser.h> -#include <q3action.h> -#include <q3header.h> -#include <q3filedialog.h> -#include <q3dragobject.h> -#include <q3popupmenu.h> -#endif - -#include <qapplication.h> -#include <qdesktopwidget.h> -#include <qtoolbar.h> -#include <qlayout.h> -#include <qsplitter.h> -#include <qlineedit.h> -#include <qlabel.h> -#include <qpushbutton.h> -#include <qmenubar.h> -#include <qmessagebox.h> -#include <qregexp.h> -#include <qevent.h> - -#include <stdlib.h> - -#include "lkc.h" -#include "qconf.h" - -#include "qconf.moc" -#include "images.c" - -#ifdef _ -# undef _ -# define _ qgettext -#endif - -static QApplication *configApp; -static ConfigSettings *configSettings; - -Q3Action *ConfigMainWindow::saveAction; - -static inline QString qgettext(const char* str) -{ - return QString::fromLocal8Bit(gettext(str)); -} - -static inline QString qgettext(const QString& str) -{ - return QString::fromLocal8Bit(gettext(str.latin1())); -} - -ConfigSettings::ConfigSettings() - : QSettings("kernel.org", "qconf") -{ -} - -/** - * Reads a list of integer values from the application settings. - */ -Q3ValueList<int> ConfigSettings::readSizes(const QString& key, bool *ok) -{ - Q3ValueList<int> result; - QStringList entryList = readListEntry(key, ok); - QStringList::Iterator it; - - for (it = entryList.begin(); it != entryList.end(); ++it) - result.push_back((*it).toInt()); - - return result; -} - -/** - * Writes a list of integer values to the application settings. - */ -bool ConfigSettings::writeSizes(const QString& key, const Q3ValueList<int>& value) -{ - QStringList stringList; - Q3ValueList<int>::ConstIterator it; - - for (it = value.begin(); it != value.end(); ++it) - stringList.push_back(QString::number(*it)); - return writeEntry(key, stringList); -} - - -/* - * set the new data - * TODO check the value - */ -void ConfigItem::okRename(int col) -{ - Parent::okRename(col); - sym_set_string_value(menu->sym, text(dataColIdx).latin1()); - listView()->updateList(this); -} - -/* - * update the displayed of a menu entry - */ -void ConfigItem::updateMenu(void) -{ - ConfigList* list; - struct symbol* sym; - struct property *prop; - QString prompt; - int type; - tristate expr; - - list = listView(); - if (goParent) { - setPixmap(promptColIdx, list->menuBackPix); - prompt = ".."; - goto set_prompt; - } - - sym = menu->sym; - prop = menu->prompt; - prompt = _(menu_get_prompt(menu)); - - if (prop) switch (prop->type) { - case P_MENU: - if (list->mode == singleMode || list->mode == symbolMode) { - /* a menuconfig entry is displayed differently - * depending whether it's at the view root or a child. - */ - if (sym && list->rootEntry == menu) - break; - setPixmap(promptColIdx, list->menuPix); - } else { - if (sym) - break; - setPixmap(promptColIdx, 0); - } - goto set_prompt; - case P_COMMENT: - setPixmap(promptColIdx, 0); - goto set_prompt; - default: - ; - } - if (!sym) - goto set_prompt; - - setText(nameColIdx, QString::fromLocal8Bit(sym->name)); - - type = sym_get_type(sym); - switch (type) { - case S_BOOLEAN: - case S_TRISTATE: - char ch; - - if (!sym_is_changable(sym) && list->optMode == normalOpt) { - setPixmap(promptColIdx, 0); - setText(noColIdx, QString::null); - setText(modColIdx, QString::null); - setText(yesColIdx, QString::null); - break; - } - expr = sym_get_tristate_value(sym); - switch (expr) { - case yes: - if (sym_is_choice_value(sym) && type == S_BOOLEAN) - setPixmap(promptColIdx, list->choiceYesPix); - else - setPixmap(promptColIdx, list->symbolYesPix); - setText(yesColIdx, "Y"); - ch = 'Y'; - break; - case mod: - setPixmap(promptColIdx, list->symbolModPix); - setText(modColIdx, "M"); - ch = 'M'; - break; - default: - if (sym_is_choice_value(sym) && type == S_BOOLEAN) - setPixmap(promptColIdx, list->choiceNoPix); - else - setPixmap(promptColIdx, list->symbolNoPix); - setText(noColIdx, "N"); - ch = 'N'; - break; - } - if (expr != no) - setText(noColIdx, sym_tristate_within_range(sym, no) ? "_" : 0); - if (expr != mod) - setText(modColIdx, sym_tristate_within_range(sym, mod) ? "_" : 0); - if (expr != yes) - setText(yesColIdx, sym_tristate_within_range(sym, yes) ? "_" : 0); - - setText(dataColIdx, QChar(ch)); - break; - case S_INT: - case S_HEX: - case S_STRING: - const char* data; - - data = sym_get_string_value(sym); - - int i = list->mapIdx(dataColIdx); - if (i >= 0) - setRenameEnabled(i, TRUE); - setText(dataColIdx, data); - if (type == S_STRING) - prompt = QString("%1: %2").arg(prompt).arg(data); - else - prompt = QString("(%2) %1").arg(prompt).arg(data); - break; - } - if (!sym_has_value(sym) && visible) - prompt += _(" (NEW)"); -set_prompt: - setText(promptColIdx, prompt); -} - -void ConfigItem::testUpdateMenu(bool v) -{ - ConfigItem* i; - - visible = v; - if (!menu) - return; - - sym_calc_value(menu->sym); - if (menu->flags & MENU_CHANGED) { - /* the menu entry changed, so update all list items */ - menu->flags &= ~MENU_CHANGED; - for (i = (ConfigItem*)menu->data; i; i = i->nextItem) - i->updateMenu(); - } else if (listView()->updateAll) - updateMenu(); -} - -void ConfigItem::paintCell(QPainter* p, const QColorGroup& cg, int column, int width, int align) -{ - ConfigList* list = listView(); - - if (visible) { - if (isSelected() && !list->hasFocus() && list->mode == menuMode) - Parent::paintCell(p, list->inactivedColorGroup, column, width, align); - else - Parent::paintCell(p, cg, column, width, align); - } else - Parent::paintCell(p, list->disabledColorGroup, column, width, align); -} - -/* - * construct a menu entry - */ -void ConfigItem::init(void) -{ - if (menu) { - ConfigList* list = listView(); - nextItem = (ConfigItem*)menu->data; - menu->data = this; - - if (list->mode != fullMode) - setOpen(TRUE); - sym_calc_value(menu->sym); - } - updateMenu(); -} - -/* - * destruct a menu entry - */ -ConfigItem::~ConfigItem(void) -{ - if (menu) { - ConfigItem** ip = (ConfigItem**)&menu->data; - for (; *ip; ip = &(*ip)->nextItem) { - if (*ip == this) { - *ip = nextItem; - break; - } - } - } -} - -ConfigLineEdit::ConfigLineEdit(ConfigView* parent) - : Parent(parent) -{ - connect(this, SIGNAL(lostFocus()), SLOT(hide())); -} - -void ConfigLineEdit::show(ConfigItem* i) -{ - item = i; - if (sym_get_string_value(item->menu->sym)) - setText(QString::fromLocal8Bit(sym_get_string_value(item->menu->sym))); - else - setText(QString::null); - Parent::show(); - setFocus(); -} - -void ConfigLineEdit::keyPressEvent(QKeyEvent* e) -{ - switch (e->key()) { - case Qt::Key_Escape: - break; - case Qt::Key_Return: - case Qt::Key_Enter: - sym_set_string_value(item->menu->sym, text().latin1()); - parent()->updateList(item); - break; - default: - Parent::keyPressEvent(e); - return; - } - e->accept(); - parent()->list->setFocus(); - hide(); -} - -ConfigList::ConfigList(ConfigView* p, const char *name) - : Parent(p, name), - updateAll(false), - symbolYesPix(xpm_symbol_yes), symbolModPix(xpm_symbol_mod), symbolNoPix(xpm_symbol_no), - choiceYesPix(xpm_choice_yes), choiceNoPix(xpm_choice_no), - menuPix(xpm_menu), menuInvPix(xpm_menu_inv), menuBackPix(xpm_menuback), voidPix(xpm_void), - showName(false), showRange(false), showData(false), optMode(normalOpt), - rootEntry(0), headerPopup(0) -{ - int i; - - setSorting(-1); - setRootIsDecorated(TRUE); - disabledColorGroup = palette().active(); - disabledColorGroup.setColor(QColorGroup::Text, palette().disabled().text()); - inactivedColorGroup = palette().active(); - inactivedColorGroup.setColor(QColorGroup::Highlight, palette().disabled().highlight()); - - connect(this, SIGNAL(selectionChanged(void)), - SLOT(updateSelection(void))); - - if (name) { - configSettings->beginGroup(name); - showName = configSettings->readBoolEntry("/showName", false); - showRange = configSettings->readBoolEntry("/showRange", false); - showData = configSettings->readBoolEntry("/showData", false); - optMode = (enum optionMode)configSettings->readNumEntry("/optionMode", false); - configSettings->endGroup(); - connect(configApp, SIGNAL(aboutToQuit()), SLOT(saveSettings())); - } - - for (i = 0; i < colNr; i++) - colMap[i] = colRevMap[i] = -1; - addColumn(promptColIdx, _("Option")); - - reinit(); -} - -bool ConfigList::menuSkip(struct menu *menu) -{ - if (optMode == normalOpt && menu_is_visible(menu)) - return false; - if (optMode == promptOpt && menu_has_prompt(menu)) - return false; - if (optMode == allOpt) - return false; - return true; -} - -void ConfigList::reinit(void) -{ - removeColumn(dataColIdx); - removeColumn(yesColIdx); - removeColumn(modColIdx); - removeColumn(noColIdx); - removeColumn(nameColIdx); - - if (showName) - addColumn(nameColIdx, _("Name")); - if (showRange) { - addColumn(noColIdx, "N"); - addColumn(modColIdx, "M"); - addColumn(yesColIdx, "Y"); - } - if (showData) - addColumn(dataColIdx, _("Value")); - - updateListAll(); -} - -void ConfigList::saveSettings(void) -{ - if (name()) { - configSettings->beginGroup(name()); - configSettings->writeEntry("/showName", showName); - configSettings->writeEntry("/showRange", showRange); - configSettings->writeEntry("/showData", showData); - configSettings->writeEntry("/optionMode", (int)optMode); - configSettings->endGroup(); - } -} - -ConfigItem* ConfigList::findConfigItem(struct menu *menu) -{ - ConfigItem* item = (ConfigItem*)menu->data; - - for (; item; item = item->nextItem) { - if (this == item->listView()) - break; - } - - return item; -} - -void ConfigList::updateSelection(void) -{ - struct menu *menu; - enum prop_type type; - - ConfigItem* item = (ConfigItem*)selectedItem(); - if (!item) - return; - - menu = item->menu; - emit menuChanged(menu); - if (!menu) - return; - type = menu->prompt ? menu->prompt->type : P_UNKNOWN; - if (mode == menuMode && type == P_MENU) - emit menuSelected(menu); -} - -void ConfigList::updateList(ConfigItem* item) -{ - ConfigItem* last = 0; - - if (!rootEntry) { - if (mode != listMode) - goto update; - Q3ListViewItemIterator it(this); - ConfigItem* item; - - for (; it.current(); ++it) { - item = (ConfigItem*)it.current(); - if (!item->menu) - continue; - item->testUpdateMenu(menu_is_visible(item->menu)); - } - return; - } - - if (rootEntry != &rootmenu && (mode == singleMode || - (mode == symbolMode && rootEntry->parent != &rootmenu))) { - item = firstChild(); - if (!item) - item = new ConfigItem(this, 0, true); - last = item; - } - if ((mode == singleMode || (mode == symbolMode && !(rootEntry->flags & MENU_ROOT))) && - rootEntry->sym && rootEntry->prompt) { - item = last ? last->nextSibling() : firstChild(); - if (!item) - item = new ConfigItem(this, last, rootEntry, true); - else - item->testUpdateMenu(true); - - updateMenuList(item, rootEntry); - triggerUpdate(); - return; - } -update: - updateMenuList(this, rootEntry); - triggerUpdate(); -} - -void ConfigList::setValue(ConfigItem* item, tristate val) -{ - struct symbol* sym; - int type; - tristate oldval; - - sym = item->menu ? item->menu->sym : 0; - if (!sym) - return; - - type = sym_get_type(sym); - switch (type) { - case S_BOOLEAN: - case S_TRISTATE: - oldval = sym_get_tristate_value(sym); - - if (!sym_set_tristate_value(sym, val)) - return; - if (oldval == no && item->menu->list) - item->setOpen(TRUE); - parent()->updateList(item); - break; - } -} - -void ConfigList::changeValue(ConfigItem* item) -{ - struct symbol* sym; - struct menu* menu; - int type, oldexpr, newexpr; - - menu = item->menu; - if (!menu) - return; - sym = menu->sym; - if (!sym) { - if (item->menu->list) - item->setOpen(!item->isOpen()); - return; - } - - type = sym_get_type(sym); - switch (type) { - case S_BOOLEAN: - case S_TRISTATE: - oldexpr = sym_get_tristate_value(sym); - newexpr = sym_toggle_tristate_value(sym); - if (item->menu->list) { - if (oldexpr == newexpr) - item->setOpen(!item->isOpen()); - else if (oldexpr == no) - item->setOpen(TRUE); - } - if (oldexpr != newexpr) - parent()->updateList(item); - break; - case S_INT: - case S_HEX: - case S_STRING: - if (colMap[dataColIdx] >= 0) - item->startRename(colMap[dataColIdx]); - else - parent()->lineEdit->show(item); - break; - } -} - -void ConfigList::setRootMenu(struct menu *menu) -{ - enum prop_type type; - - if (rootEntry == menu) - return; - type = menu && menu->prompt ? menu->prompt->type : P_UNKNOWN; - if (type != P_MENU) - return; - updateMenuList(this, 0); - rootEntry = menu; - updateListAll(); - setSelected(currentItem(), hasFocus()); - ensureItemVisible(currentItem()); -} - -void ConfigList::setParentMenu(void) -{ - ConfigItem* item; - struct menu *oldroot; - - oldroot = rootEntry; - if (rootEntry == &rootmenu) - return; - setRootMenu(menu_get_parent_menu(rootEntry->parent)); - - Q3ListViewItemIterator it(this); - for (; (item = (ConfigItem*)it.current()); it++) { - if (item->menu == oldroot) { - setCurrentItem(item); - ensureItemVisible(item); - break; - } - } -} - -/* - * update all the children of a menu entry - * removes/adds the entries from the parent widget as necessary - * - * parent: either the menu list widget or a menu entry widget - * menu: entry to be updated - */ -template <class P> -void ConfigList::updateMenuList(P* parent, struct menu* menu) -{ - struct menu* child; - ConfigItem* item; - ConfigItem* last; - bool visible; - enum prop_type type; - - if (!menu) { - while ((item = parent->firstChild())) - delete item; - return; - } - - last = parent->firstChild(); - if (last && !last->goParent) - last = 0; - for (child = menu->list; child; child = child->next) { - item = last ? last->nextSibling() : parent->firstChild(); - type = child->prompt ? child->prompt->type : P_UNKNOWN; - - switch (mode) { - case menuMode: - if (!(child->flags & MENU_ROOT)) - goto hide; - break; - case symbolMode: - if (child->flags & MENU_ROOT) - goto hide; - break; - default: - break; - } - - visible = menu_is_visible(child); - if (!menuSkip(child)) { - if (!child->sym && !child->list && !child->prompt) - continue; - if (!item || item->menu != child) - item = new ConfigItem(parent, last, child, visible); - else - item->testUpdateMenu(visible); - - if (mode == fullMode || mode == menuMode || type != P_MENU) - updateMenuList(item, child); - else - updateMenuList(item, 0); - last = item; - continue; - } - hide: - if (item && item->menu == child) { - last = parent->firstChild(); - if (last == item) - last = 0; - else while (last->nextSibling() != item) - last = last->nextSibling(); - delete item; - } - } -} - -void ConfigList::keyPressEvent(QKeyEvent* ev) -{ - Q3ListViewItem* i = currentItem(); - ConfigItem* item; - struct menu *menu; - enum prop_type type; - - if (ev->key() == Qt::Key_Escape && mode != fullMode && mode != listMode) { - emit parentSelected(); - ev->accept(); - return; - } - - if (!i) { - Parent::keyPressEvent(ev); - return; - } - item = (ConfigItem*)i; - - switch (ev->key()) { - case Qt::Key_Return: - case Qt::Key_Enter: - if (item->goParent) { - emit parentSelected(); - break; - } - menu = item->menu; - if (!menu) - break; - type = menu->prompt ? menu->prompt->type : P_UNKNOWN; - if (type == P_MENU && rootEntry != menu && - mode != fullMode && mode != menuMode) { - emit menuSelected(menu); - break; - } - case Qt::Key_Space: - changeValue(item); - break; - case Qt::Key_N: - setValue(item, no); - break; - case Qt::Key_M: - setValue(item, mod); - break; - case Qt::Key_Y: - setValue(item, yes); - break; - default: - Parent::keyPressEvent(ev); - return; - } - ev->accept(); -} - -void ConfigList::contentsMousePressEvent(QMouseEvent* e) -{ - //QPoint p(contentsToViewport(e->pos())); - //printf("contentsMousePressEvent: %d,%d\n", p.x(), p.y()); - Parent::contentsMousePressEvent(e); -} - -void ConfigList::contentsMouseReleaseEvent(QMouseEvent* e) -{ - QPoint p(contentsToViewport(e->pos())); - ConfigItem* item = (ConfigItem*)itemAt(p); - struct menu *menu; - enum prop_type ptype; - const QPixmap* pm; - int idx, x; - - if (!item) - goto skip; - - menu = item->menu; - x = header()->offset() + p.x(); - idx = colRevMap[header()->sectionAt(x)]; - switch (idx) { - case promptColIdx: - pm = item->pixmap(promptColIdx); - if (pm) { - int off = header()->sectionPos(0) + itemMargin() + - treeStepSize() * (item->depth() + (rootIsDecorated() ? 1 : 0)); - if (x >= off && x < off + pm->width()) { - if (item->goParent) { - emit parentSelected(); - break; - } else if (!menu) - break; - ptype = menu->prompt ? menu->prompt->type : P_UNKNOWN; - if (ptype == P_MENU && rootEntry != menu && - mode != fullMode && mode != menuMode) - emit menuSelected(menu); - else - changeValue(item); - } - } - break; - case noColIdx: - setValue(item, no); - break; - case modColIdx: - setValue(item, mod); - break; - case yesColIdx: - setValue(item, yes); - break; - case dataColIdx: - changeValue(item); - break; - } - -skip: - //printf("contentsMouseReleaseEvent: %d,%d\n", p.x(), p.y()); - Parent::contentsMouseReleaseEvent(e); -} - -void ConfigList::contentsMouseMoveEvent(QMouseEvent* e) -{ - //QPoint p(contentsToViewport(e->pos())); - //printf("contentsMouseMoveEvent: %d,%d\n", p.x(), p.y()); - Parent::contentsMouseMoveEvent(e); -} - -void ConfigList::contentsMouseDoubleClickEvent(QMouseEvent* e) -{ - QPoint p(contentsToViewport(e->pos())); - ConfigItem* item = (ConfigItem*)itemAt(p); - struct menu *menu; - enum prop_type ptype; - - if (!item) - goto skip; - if (item->goParent) { - emit parentSelected(); - goto skip; - } - menu = item->menu; - if (!menu) - goto skip; - ptype = menu->prompt ? menu->prompt->type : P_UNKNOWN; - if (ptype == P_MENU && (mode == singleMode || mode == symbolMode)) - emit menuSelected(menu); - else if (menu->sym) - changeValue(item); - -skip: - //printf("contentsMouseDoubleClickEvent: %d,%d\n", p.x(), p.y()); - Parent::contentsMouseDoubleClickEvent(e); -} - -void ConfigList::focusInEvent(QFocusEvent *e) -{ - struct menu *menu = NULL; - - Parent::focusInEvent(e); - - ConfigItem* item = (ConfigItem *)currentItem(); - if (item) { - setSelected(item, TRUE); - menu = item->menu; - } - emit gotFocus(menu); -} - -void ConfigList::contextMenuEvent(QContextMenuEvent *e) -{ - if (e->y() <= header()->geometry().bottom()) { - if (!headerPopup) { - Q3Action *action; - - headerPopup = new Q3PopupMenu(this); - action = new Q3Action(NULL, _("Show Name"), 0, this); - action->setToggleAction(TRUE); - connect(action, SIGNAL(toggled(bool)), - parent(), SLOT(setShowName(bool))); - connect(parent(), SIGNAL(showNameChanged(bool)), - action, SLOT(setOn(bool))); - action->setOn(showName); - action->addTo(headerPopup); - action = new Q3Action(NULL, _("Show Range"), 0, this); - action->setToggleAction(TRUE); - connect(action, SIGNAL(toggled(bool)), - parent(), SLOT(setShowRange(bool))); - connect(parent(), SIGNAL(showRangeChanged(bool)), - action, SLOT(setOn(bool))); - action->setOn(showRange); - action->addTo(headerPopup); - action = new Q3Action(NULL, _("Show Data"), 0, this); - action->setToggleAction(TRUE); - connect(action, SIGNAL(toggled(bool)), - parent(), SLOT(setShowData(bool))); - connect(parent(), SIGNAL(showDataChanged(bool)), - action, SLOT(setOn(bool))); - action->setOn(showData); - action->addTo(headerPopup); - } - headerPopup->exec(e->globalPos()); - e->accept(); - } else - e->ignore(); -} - -ConfigView*ConfigView::viewList; -QAction *ConfigView::showNormalAction; -QAction *ConfigView::showAllAction; -QAction *ConfigView::showPromptAction; - -ConfigView::ConfigView(QWidget* parent, const char *name) - : Parent(parent, name) -{ - list = new ConfigList(this, name); - lineEdit = new ConfigLineEdit(this); - lineEdit->hide(); - - this->nextView = viewList; - viewList = this; -} - -ConfigView::~ConfigView(void) -{ - ConfigView** vp; - - for (vp = &viewList; *vp; vp = &(*vp)->nextView) { - if (*vp == this) { - *vp = nextView; - break; - } - } -} - -void ConfigView::setOptionMode(QAction *act) -{ - if (act == showNormalAction) - list->optMode = normalOpt; - else if (act == showAllAction) - list->optMode = allOpt; - else - list->optMode = promptOpt; - - list->updateListAll(); -} - -void ConfigView::setShowName(bool b) -{ - if (list->showName != b) { - list->showName = b; - list->reinit(); - emit showNameChanged(b); - } -} - -void ConfigView::setShowRange(bool b) -{ - if (list->showRange != b) { - list->showRange = b; - list->reinit(); - emit showRangeChanged(b); - } -} - -void ConfigView::setShowData(bool b) -{ - if (list->showData != b) { - list->showData = b; - list->reinit(); - emit showDataChanged(b); - } -} - -void ConfigList::setAllOpen(bool open) -{ - Q3ListViewItemIterator it(this); - - for (; it.current(); it++) - it.current()->setOpen(open); -} - -void ConfigView::updateList(ConfigItem* item) -{ - ConfigView* v; - - for (v = viewList; v; v = v->nextView) - v->list->updateList(item); -} - -void ConfigView::updateListAll(void) -{ - ConfigView* v; - - for (v = viewList; v; v = v->nextView) - v->list->updateListAll(); -} - -ConfigInfoView::ConfigInfoView(QWidget* parent, const char *name) - : Parent(parent, name), sym(0), _menu(0) -{ - if (name) { - configSettings->beginGroup(name); - _showDebug = configSettings->readBoolEntry("/showDebug", false); - configSettings->endGroup(); - connect(configApp, SIGNAL(aboutToQuit()), SLOT(saveSettings())); - } -} - -void ConfigInfoView::saveSettings(void) -{ - if (name()) { - configSettings->beginGroup(name()); - configSettings->writeEntry("/showDebug", showDebug()); - configSettings->endGroup(); - } -} - -void ConfigInfoView::setShowDebug(bool b) -{ - if (_showDebug != b) { - _showDebug = b; - if (_menu) - menuInfo(); - else if (sym) - symbolInfo(); - emit showDebugChanged(b); - } -} - -void ConfigInfoView::setInfo(struct menu *m) -{ - if (_menu == m) - return; - _menu = m; - sym = NULL; - if (!_menu) - clear(); - else - menuInfo(); -} - -void ConfigInfoView::symbolInfo(void) -{ - QString str; - - str += "<big>Symbol: <b>"; - str += print_filter(sym->name); - str += "</b></big><br><br>value: "; - str += print_filter(sym_get_string_value(sym)); - str += "<br>visibility: "; - str += sym->visible == yes ? "y" : sym->visible == mod ? "m" : "n"; - str += "<br>"; - str += debug_info(sym); - - setText(str); -} - -void ConfigInfoView::menuInfo(void) -{ - struct symbol* sym; - QString head, debug, help; - - sym = _menu->sym; - if (sym) { - if (_menu->prompt) { - head += "<big><b>"; - head += print_filter(_(_menu->prompt->text)); - head += "</b></big>"; - if (sym->name) { - head += " ("; - if (showDebug()) - head += QString().sprintf("<a href=\"s%p\">", sym); - head += print_filter(sym->name); - if (showDebug()) - head += "</a>"; - head += ")"; - } - } else if (sym->name) { - head += "<big><b>"; - if (showDebug()) - head += QString().sprintf("<a href=\"s%p\">", sym); - head += print_filter(sym->name); - if (showDebug()) - head += "</a>"; - head += "</b></big>"; - } - head += "<br><br>"; - - if (showDebug()) - debug = debug_info(sym); - - struct gstr help_gstr = str_new(); - menu_get_ext_help(_menu, &help_gstr); - help = print_filter(str_get(&help_gstr)); - str_free(&help_gstr); - } else if (_menu->prompt) { - head += "<big><b>"; - head += print_filter(_(_menu->prompt->text)); - head += "</b></big><br><br>"; - if (showDebug()) { - if (_menu->prompt->visible.expr) { - debug += " dep: "; - expr_print(_menu->prompt->visible.expr, expr_print_help, &debug, E_NONE); - debug += "<br><br>"; - } - } - } - if (showDebug()) - debug += QString().sprintf("defined at %s:%d<br><br>", _menu->file->name, _menu->lineno); - - setText(head + debug + help); -} - -QString ConfigInfoView::debug_info(struct symbol *sym) -{ - QString debug; - - debug += "type: "; - debug += print_filter(sym_type_name(sym->type)); - if (sym_is_choice(sym)) - debug += " (choice)"; - debug += "<br>"; - if (sym->rev_dep.expr) { - debug += "reverse dep: "; - expr_print(sym->rev_dep.expr, expr_print_help, &debug, E_NONE); - debug += "<br>"; - } - for (struct property *prop = sym->prop; prop; prop = prop->next) { - switch (prop->type) { - case P_PROMPT: - case P_MENU: - debug += QString().sprintf("prompt: <a href=\"m%p\">", prop->menu); - debug += print_filter(_(prop->text)); - debug += "</a><br>"; - break; - case P_DEFAULT: - case P_SELECT: - case P_RANGE: - case P_ENV: - debug += prop_get_type_name(prop->type); - debug += ": "; - expr_print(prop->expr, expr_print_help, &debug, E_NONE); - debug += "<br>"; - break; - case P_CHOICE: - if (sym_is_choice(sym)) { - debug += "choice: "; - expr_print(prop->expr, expr_print_help, &debug, E_NONE); - debug += "<br>"; - } - break; - default: - debug += "unknown property: "; - debug += prop_get_type_name(prop->type); - debug += "<br>"; - } - if (prop->visible.expr) { - debug += " dep: "; - expr_print(prop->visible.expr, expr_print_help, &debug, E_NONE); - debug += "<br>"; - } - } - debug += "<br>"; - - return debug; -} - -QString ConfigInfoView::print_filter(const QString &str) -{ - QRegExp re("[<>&\"\\n]"); - QString res = str; - for (int i = 0; (i = res.find(re, i)) >= 0;) { - switch (res[i].latin1()) { - case '<': - res.replace(i, 1, "<"); - i += 4; - break; - case '>': - res.replace(i, 1, ">"); - i += 4; - break; - case '&': - res.replace(i, 1, "&"); - i += 5; - break; - case '"': - res.replace(i, 1, """); - i += 6; - break; - case '\n': - res.replace(i, 1, "<br>"); - i += 4; - break; - } - } - return res; -} - -void ConfigInfoView::expr_print_help(void *data, struct symbol *sym, const char *str) -{ - QString* text = reinterpret_cast<QString*>(data); - QString str2 = print_filter(str); - - if (sym && sym->name && !(sym->flags & SYMBOL_CONST)) { - *text += QString().sprintf("<a href=\"s%p\">", sym); - *text += str2; - *text += "</a>"; - } else - *text += str2; -} - -Q3PopupMenu* ConfigInfoView::createPopupMenu(const QPoint& pos) -{ - Q3PopupMenu* popup = Parent::createPopupMenu(pos); - Q3Action* action = new Q3Action(NULL, _("Show Debug Info"), 0, popup); - action->setToggleAction(TRUE); - connect(action, SIGNAL(toggled(bool)), SLOT(setShowDebug(bool))); - connect(this, SIGNAL(showDebugChanged(bool)), action, SLOT(setOn(bool))); - action->setOn(showDebug()); - popup->insertSeparator(); - action->addTo(popup); - return popup; -} - -void ConfigInfoView::contentsContextMenuEvent(QContextMenuEvent *e) -{ - Parent::contentsContextMenuEvent(e); -} - -ConfigSearchWindow::ConfigSearchWindow(ConfigMainWindow* parent, const char *name) - : Parent(parent, name), result(NULL) -{ - setCaption("Search Config"); - - QVBoxLayout* layout1 = new QVBoxLayout(this, 11, 6); - QHBoxLayout* layout2 = new QHBoxLayout(0, 0, 6); - layout2->addWidget(new QLabel(_("Find:"), this)); - editField = new QLineEdit(this); - connect(editField, SIGNAL(returnPressed()), SLOT(search())); - layout2->addWidget(editField); - searchButton = new QPushButton(_("Search"), this); - searchButton->setAutoDefault(FALSE); - connect(searchButton, SIGNAL(clicked()), SLOT(search())); - layout2->addWidget(searchButton); - layout1->addLayout(layout2); - - split = new QSplitter(this); - split->setOrientation(Qt::Vertical); - list = new ConfigView(split, name); - list->list->mode = listMode; - info = new ConfigInfoView(split, name); - connect(list->list, SIGNAL(menuChanged(struct menu *)), - info, SLOT(setInfo(struct menu *))); - connect(list->list, SIGNAL(menuChanged(struct menu *)), - parent, SLOT(setMenuLink(struct menu *))); - - layout1->addWidget(split); - - if (name) { - int x, y, width, height; - bool ok; - - configSettings->beginGroup(name); - width = configSettings->readNumEntry("/window width", parent->width() / 2); - height = configSettings->readNumEntry("/window height", parent->height() / 2); - resize(width, height); - x = configSettings->readNumEntry("/window x", 0, &ok); - if (ok) - y = configSettings->readNumEntry("/window y", 0, &ok); - if (ok) - move(x, y); - Q3ValueList<int> sizes = configSettings->readSizes("/split", &ok); - if (ok) - split->setSizes(sizes); - configSettings->endGroup(); - connect(configApp, SIGNAL(aboutToQuit()), SLOT(saveSettings())); - } -} - -void ConfigSearchWindow::saveSettings(void) -{ - if (name()) { - configSettings->beginGroup(name()); - configSettings->writeEntry("/window x", pos().x()); - configSettings->writeEntry("/window y", pos().y()); - configSettings->writeEntry("/window width", size().width()); - configSettings->writeEntry("/window height", size().height()); - configSettings->writeSizes("/split", split->sizes()); - configSettings->endGroup(); - } -} - -void ConfigSearchWindow::search(void) -{ - struct symbol **p; - struct property *prop; - ConfigItem *lastItem = NULL; - - free(result); - list->list->clear(); - info->clear(); - - result = sym_re_search(editField->text().latin1()); - if (!result) - return; - for (p = result; *p; p++) { - for_all_prompts((*p), prop) - lastItem = new ConfigItem(list->list, lastItem, prop->menu, - menu_is_visible(prop->menu)); - } -} - -/* - * Construct the complete config widget - */ -ConfigMainWindow::ConfigMainWindow(void) - : searchWindow(0) -{ - QMenuBar* menu; - bool ok; - int x, y, width, height; - char title[256]; - - QDesktopWidget *d = configApp->desktop(); - snprintf(title, sizeof(title), "%s%s", - rootmenu.prompt->text, -#if QT_VERSION < 0x040000 - " (Qt3)" -#else - "" -#endif - ); - setCaption(title); - - width = configSettings->readNumEntry("/window width", d->width() - 64); - height = configSettings->readNumEntry("/window height", d->height() - 64); - resize(width, height); - x = configSettings->readNumEntry("/window x", 0, &ok); - if (ok) - y = configSettings->readNumEntry("/window y", 0, &ok); - if (ok) - move(x, y); - - split1 = new QSplitter(this); - split1->setOrientation(Qt::Horizontal); - setCentralWidget(split1); - - menuView = new ConfigView(split1, "menu"); - menuList = menuView->list; - - split2 = new QSplitter(split1); - split2->setOrientation(Qt::Vertical); - - // create config tree - configView = new ConfigView(split2, "config"); - configList = configView->list; - - helpText = new ConfigInfoView(split2, "help"); - helpText->setTextFormat(Qt::RichText); - - setTabOrder(configList, helpText); - configList->setFocus(); - - menu = menuBar(); - toolBar = new Q3ToolBar("Tools", this); - - backAction = new Q3Action("Back", QPixmap(xpm_back), _("Back"), 0, this); - connect(backAction, SIGNAL(activated()), SLOT(goBack())); - backAction->setEnabled(FALSE); - Q3Action *quitAction = new Q3Action("Quit", _("&Quit"), Qt::CTRL + Qt::Key_Q, this); - connect(quitAction, SIGNAL(activated()), SLOT(close())); - Q3Action *loadAction = new Q3Action("Load", QPixmap(xpm_load), _("&Load"), Qt::CTRL + Qt::Key_L, this); - connect(loadAction, SIGNAL(activated()), SLOT(loadConfig())); - saveAction = new Q3Action("Save", QPixmap(xpm_save), _("&Save"), Qt::CTRL + Qt::Key_S, this); - connect(saveAction, SIGNAL(activated()), SLOT(saveConfig())); - conf_set_changed_callback(conf_changed); - // Set saveAction's initial state - conf_changed(); - Q3Action *saveAsAction = new Q3Action("Save As...", _("Save &As..."), 0, this); - connect(saveAsAction, SIGNAL(activated()), SLOT(saveConfigAs())); - Q3Action *searchAction = new Q3Action("Find", _("&Find"), Qt::CTRL + Qt::Key_F, this); - connect(searchAction, SIGNAL(activated()), SLOT(searchConfig())); - Q3Action *singleViewAction = new Q3Action("Single View", QPixmap(xpm_single_view), _("Single View"), 0, this); - connect(singleViewAction, SIGNAL(activated()), SLOT(showSingleView())); - Q3Action *splitViewAction = new Q3Action("Split View", QPixmap(xpm_split_view), _("Split View"), 0, this); - connect(splitViewAction, SIGNAL(activated()), SLOT(showSplitView())); - Q3Action *fullViewAction = new Q3Action("Full View", QPixmap(xpm_tree_view), _("Full View"), 0, this); - connect(fullViewAction, SIGNAL(activated()), SLOT(showFullView())); - - Q3Action *showNameAction = new Q3Action(NULL, _("Show Name"), 0, this); - showNameAction->setToggleAction(TRUE); - connect(showNameAction, SIGNAL(toggled(bool)), configView, SLOT(setShowName(bool))); - connect(configView, SIGNAL(showNameChanged(bool)), showNameAction, SLOT(setOn(bool))); - showNameAction->setOn(configView->showName()); - Q3Action *showRangeAction = new Q3Action(NULL, _("Show Range"), 0, this); - showRangeAction->setToggleAction(TRUE); - connect(showRangeAction, SIGNAL(toggled(bool)), configView, SLOT(setShowRange(bool))); - connect(configView, SIGNAL(showRangeChanged(bool)), showRangeAction, SLOT(setOn(bool))); - showRangeAction->setOn(configList->showRange); - Q3Action *showDataAction = new Q3Action(NULL, _("Show Data"), 0, this); - showDataAction->setToggleAction(TRUE); - connect(showDataAction, SIGNAL(toggled(bool)), configView, SLOT(setShowData(bool))); - connect(configView, SIGNAL(showDataChanged(bool)), showDataAction, SLOT(setOn(bool))); - showDataAction->setOn(configList->showData); - - QActionGroup *optGroup = new QActionGroup(this); - optGroup->setExclusive(TRUE); - connect(optGroup, SIGNAL(selected(QAction *)), configView, - SLOT(setOptionMode(QAction *))); - connect(optGroup, SIGNAL(selected(QAction *)), menuView, - SLOT(setOptionMode(QAction *))); - -#if QT_VERSION >= 0x040000 - configView->showNormalAction = new QAction(_("Show Normal Options"), optGroup); - configView->showAllAction = new QAction(_("Show All Options"), optGroup); - configView->showPromptAction = new QAction(_("Show Prompt Options"), optGroup); -#else - configView->showNormalAction = new QAction(_("Show Normal Options"), 0, optGroup); - configView->showAllAction = new QAction(_("Show All Options"), 0, optGroup); - configView->showPromptAction = new QAction(_("Show Prompt Options"), 0, optGroup); -#endif - configView->showNormalAction->setToggleAction(TRUE); - configView->showNormalAction->setOn(configList->optMode == normalOpt); - configView->showAllAction->setToggleAction(TRUE); - configView->showAllAction->setOn(configList->optMode == allOpt); - configView->showPromptAction->setToggleAction(TRUE); - configView->showPromptAction->setOn(configList->optMode == promptOpt); - - Q3Action *showDebugAction = new Q3Action(NULL, _("Show Debug Info"), 0, this); - showDebugAction->setToggleAction(TRUE); - connect(showDebugAction, SIGNAL(toggled(bool)), helpText, SLOT(setShowDebug(bool))); - connect(helpText, SIGNAL(showDebugChanged(bool)), showDebugAction, SLOT(setOn(bool))); - showDebugAction->setOn(helpText->showDebug()); - - Q3Action *showIntroAction = new Q3Action(NULL, _("Introduction"), 0, this); - connect(showIntroAction, SIGNAL(activated()), SLOT(showIntro())); - Q3Action *showAboutAction = new Q3Action(NULL, _("About"), 0, this); - connect(showAboutAction, SIGNAL(activated()), SLOT(showAbout())); - - // init tool bar - backAction->addTo(toolBar); - toolBar->addSeparator(); - loadAction->addTo(toolBar); - saveAction->addTo(toolBar); - toolBar->addSeparator(); - singleViewAction->addTo(toolBar); - splitViewAction->addTo(toolBar); - fullViewAction->addTo(toolBar); - - // create config menu - Q3PopupMenu* config = new Q3PopupMenu(this); - menu->insertItem(_("&File"), config); - loadAction->addTo(config); - saveAction->addTo(config); - saveAsAction->addTo(config); - config->insertSeparator(); - quitAction->addTo(config); - - // create edit menu - Q3PopupMenu* editMenu = new Q3PopupMenu(this); - menu->insertItem(_("&Edit"), editMenu); - searchAction->addTo(editMenu); - - // create options menu - Q3PopupMenu* optionMenu = new Q3PopupMenu(this); - menu->insertItem(_("&Option"), optionMenu); - showNameAction->addTo(optionMenu); - showRangeAction->addTo(optionMenu); - showDataAction->addTo(optionMenu); - optionMenu->insertSeparator(); - optGroup->addTo(optionMenu); - optionMenu->insertSeparator(); - - // create help menu - Q3PopupMenu* helpMenu = new Q3PopupMenu(this); - menu->insertSeparator(); - menu->insertItem(_("&Help"), helpMenu); - showIntroAction->addTo(helpMenu); - showAboutAction->addTo(helpMenu); - - connect(configList, SIGNAL(menuChanged(struct menu *)), - helpText, SLOT(setInfo(struct menu *))); - connect(configList, SIGNAL(menuSelected(struct menu *)), - SLOT(changeMenu(struct menu *))); - connect(configList, SIGNAL(parentSelected()), - SLOT(goBack())); - connect(menuList, SIGNAL(menuChanged(struct menu *)), - helpText, SLOT(setInfo(struct menu *))); - connect(menuList, SIGNAL(menuSelected(struct menu *)), - SLOT(changeMenu(struct menu *))); - - connect(configList, SIGNAL(gotFocus(struct menu *)), - helpText, SLOT(setInfo(struct menu *))); - connect(menuList, SIGNAL(gotFocus(struct menu *)), - helpText, SLOT(setInfo(struct menu *))); - connect(menuList, SIGNAL(gotFocus(struct menu *)), - SLOT(listFocusChanged(void))); - connect(helpText, SIGNAL(menuSelected(struct menu *)), - SLOT(setMenuLink(struct menu *))); - - QString listMode = configSettings->readEntry("/listMode", "symbol"); - if (listMode == "single") - showSingleView(); - else if (listMode == "full") - showFullView(); - else /*if (listMode == "split")*/ - showSplitView(); - - // UI setup done, restore splitter positions - Q3ValueList<int> sizes = configSettings->readSizes("/split1", &ok); - if (ok) - split1->setSizes(sizes); - - sizes = configSettings->readSizes("/split2", &ok); - if (ok) - split2->setSizes(sizes); -} - -void ConfigMainWindow::loadConfig(void) -{ - QString s = Q3FileDialog::getOpenFileName(conf_get_configname(), NULL, this); - if (s.isNull()) - return; - if (conf_read(QFile::encodeName(s))) - QMessageBox::information(this, "qconf", _("Unable to load configuration!")); - ConfigView::updateListAll(); -} - -bool ConfigMainWindow::saveConfig(void) -{ - if (conf_write(NULL)) { - QMessageBox::information(this, "qconf", _("Unable to save configuration!")); - return false; - } - return true; -} - -void ConfigMainWindow::saveConfigAs(void) -{ - QString s = Q3FileDialog::getSaveFileName(conf_get_configname(), NULL, this); - if (s.isNull()) - return; - saveConfig(); -} - -void ConfigMainWindow::searchConfig(void) -{ - if (!searchWindow) - searchWindow = new ConfigSearchWindow(this, "search"); - searchWindow->show(); -} - -void ConfigMainWindow::changeMenu(struct menu *menu) -{ - configList->setRootMenu(menu); - if (configList->rootEntry->parent == &rootmenu) - backAction->setEnabled(FALSE); - else - backAction->setEnabled(TRUE); -} - -void ConfigMainWindow::setMenuLink(struct menu *menu) -{ - struct menu *parent; - ConfigList* list = NULL; - ConfigItem* item; - - if (configList->menuSkip(menu)) - return; - - switch (configList->mode) { - case singleMode: - list = configList; - parent = menu_get_parent_menu(menu); - if (!parent) - return; - list->setRootMenu(parent); - break; - case symbolMode: - if (menu->flags & MENU_ROOT) { - configList->setRootMenu(menu); - configList->clearSelection(); - list = menuList; - } else { - list = configList; - parent = menu_get_parent_menu(menu->parent); - if (!parent) - return; - item = menuList->findConfigItem(parent); - if (item) { - menuList->setSelected(item, TRUE); - menuList->ensureItemVisible(item); - } - list->setRootMenu(parent); - } - break; - case fullMode: - list = configList; - break; - default: - break; - } - - if (list) { - item = list->findConfigItem(menu); - if (item) { - list->setSelected(item, TRUE); - list->ensureItemVisible(item); - list->setFocus(); - } - } -} - -void ConfigMainWindow::listFocusChanged(void) -{ - if (menuList->mode == menuMode) - configList->clearSelection(); -} - -void ConfigMainWindow::goBack(void) -{ - ConfigItem* item; - - configList->setParentMenu(); - if (configList->rootEntry == &rootmenu) - backAction->setEnabled(FALSE); - item = (ConfigItem*)menuList->selectedItem(); - while (item) { - if (item->menu == configList->rootEntry) { - menuList->setSelected(item, TRUE); - break; - } - item = (ConfigItem*)item->parent(); - } -} - -void ConfigMainWindow::showSingleView(void) -{ - menuView->hide(); - menuList->setRootMenu(0); - configList->mode = singleMode; - if (configList->rootEntry == &rootmenu) - configList->updateListAll(); - else - configList->setRootMenu(&rootmenu); - configList->setAllOpen(TRUE); - configList->setFocus(); -} - -void ConfigMainWindow::showSplitView(void) -{ - configList->mode = symbolMode; - if (configList->rootEntry == &rootmenu) - configList->updateListAll(); - else - configList->setRootMenu(&rootmenu); - configList->setAllOpen(TRUE); - configApp->processEvents(); - menuList->mode = menuMode; - menuList->setRootMenu(&rootmenu); - menuList->setAllOpen(TRUE); - menuView->show(); - menuList->setFocus(); -} - -void ConfigMainWindow::showFullView(void) -{ - menuView->hide(); - menuList->setRootMenu(0); - configList->mode = fullMode; - if (configList->rootEntry == &rootmenu) - configList->updateListAll(); - else - configList->setRootMenu(&rootmenu); - configList->setAllOpen(FALSE); - configList->setFocus(); -} - -/* - * ask for saving configuration before quitting - * TODO ask only when something changed - */ -void ConfigMainWindow::closeEvent(QCloseEvent* e) -{ - if (!conf_get_changed()) { - e->accept(); - return; - } - QMessageBox mb("qconf", _("Save configuration?"), QMessageBox::Warning, - QMessageBox::Yes | QMessageBox::Default, QMessageBox::No, QMessageBox::Cancel | QMessageBox::Escape); - mb.setButtonText(QMessageBox::Yes, _("&Save Changes")); - mb.setButtonText(QMessageBox::No, _("&Discard Changes")); - mb.setButtonText(QMessageBox::Cancel, _("Cancel Exit")); - switch (mb.exec()) { - case QMessageBox::Yes: - if (saveConfig()) - e->accept(); - else - e->ignore(); - break; - case QMessageBox::No: - e->accept(); - break; - case QMessageBox::Cancel: - e->ignore(); - break; - } -} - -void ConfigMainWindow::showIntro(void) -{ - static const QString str = _("Welcome to the qconf graphical configuration tool.\n\n" - "For each option, a blank box indicates the feature is disabled, a check\n" - "indicates it is enabled, and a dot indicates that it is to be compiled\n" - "as a module. Clicking on the box will cycle through the three states.\n\n" - "If you do not see an option (e.g., a device driver) that you believe\n" - "should be present, try turning on Show All Options under the Options menu.\n" - "Although there is no cross reference yet to help you figure out what other\n" - "options must be enabled to support the option you are interested in, you can\n" - "still view the help of a grayed-out option.\n\n" - "Toggling Show Debug Info under the Options menu will show the dependencies,\n" - "which you can then match by examining other options.\n\n"); - - QMessageBox::information(this, "qconf", str); -} - -void ConfigMainWindow::showAbout(void) -{ - static const QString str = _("qconf is Copyright (C) 2002 Roman Zippel <zippel@linux-m68k.org>.\n\n" - "Bug reports and feature request can also be entered at http://bugzilla.kernel.org/\n"); - - QMessageBox::information(this, "qconf", str); -} - -void ConfigMainWindow::saveSettings(void) -{ - configSettings->writeEntry("/window x", pos().x()); - configSettings->writeEntry("/window y", pos().y()); - configSettings->writeEntry("/window width", size().width()); - configSettings->writeEntry("/window height", size().height()); - - QString entry; - switch(configList->mode) { - case singleMode : - entry = "single"; - break; - - case symbolMode : - entry = "split"; - break; - - case fullMode : - entry = "full"; - break; - - default: - break; - } - configSettings->writeEntry("/listMode", entry); - - configSettings->writeSizes("/split1", split1->sizes()); - configSettings->writeSizes("/split2", split2->sizes()); -} - -void ConfigMainWindow::conf_changed(void) -{ - if (saveAction) - saveAction->setEnabled(conf_get_changed()); -} - -void fixup_rootmenu(struct menu *menu) -{ - struct menu *child; - static int menu_cnt = 0; - - menu->flags |= MENU_ROOT; - for (child = menu->list; child; child = child->next) { - if (child->prompt && child->prompt->type == P_MENU) { - menu_cnt++; - fixup_rootmenu(child); - menu_cnt--; - } else if (!menu_cnt) - fixup_rootmenu(child); - } -} - -static const char *progname; - -static void usage(void) -{ - printf(_("%s <config>\n"), progname); - exit(0); -} - -int main(int ac, char** av) -{ - ConfigMainWindow* v; - const char *name; - - bindtextdomain(PACKAGE, LOCALEDIR); - textdomain(PACKAGE); - - progname = av[0]; - configApp = new QApplication(ac, av); - if (ac > 1 && av[1][0] == '-') { - switch (av[1][1]) { - case 'h': - case '?': - usage(); - } - name = av[2]; - } else - name = av[1]; - if (!name) - usage(); - - conf_parse(name); - fixup_rootmenu(&rootmenu); - conf_read(NULL); - //zconfdump(stdout); - - configSettings = new ConfigSettings(); - configSettings->beginGroup("/kconfig/qconf"); - v = new ConfigMainWindow(); - - //zconfdump(stdout); - configApp->setMainWidget(v); - configApp->connect(configApp, SIGNAL(lastWindowClosed()), SLOT(quit())); - configApp->connect(configApp, SIGNAL(aboutToQuit()), v, SLOT(saveSettings())); - v->show(); - configApp->exec(); - - configSettings->endGroup(); - delete configSettings; - - return 0; -} diff --git a/payloads/external/SeaBIOS/scripts/kconfig/qconf.h b/payloads/external/SeaBIOS/scripts/kconfig/qconf.h deleted file mode 100644 index bde0c6b6..00000000 --- a/payloads/external/SeaBIOS/scripts/kconfig/qconf.h +++ /dev/null @@ -1,338 +0,0 @@ -/* - * Copyright (C) 2002 Roman Zippel <zippel@linux-m68k.org> - * Released under the terms of the GNU GPL v2.0. - */ - -#if QT_VERSION < 0x040000 -#include <qlistview.h> -#else -#include <q3listview.h> -#endif -#include <qsettings.h> - -#if QT_VERSION < 0x040000 -#define Q3ValueList QValueList -#define Q3PopupMenu QPopupMenu -#define Q3ListView QListView -#define Q3ListViewItem QListViewItem -#define Q3VBox QVBox -#define Q3TextBrowser QTextBrowser -#define Q3MainWindow QMainWindow -#define Q3Action QAction -#define Q3ToolBar QToolBar -#define Q3ListViewItemIterator QListViewItemIterator -#define Q3FileDialog QFileDialog -#endif - -class ConfigView; -class ConfigList; -class ConfigItem; -class ConfigLineEdit; -class ConfigMainWindow; - -class ConfigSettings : public QSettings { -public: - ConfigSettings(); - Q3ValueList<int> readSizes(const QString& key, bool *ok); - bool writeSizes(const QString& key, const Q3ValueList<int>& value); -}; - -enum colIdx { - promptColIdx, nameColIdx, noColIdx, modColIdx, yesColIdx, dataColIdx, colNr -}; -enum listMode { - singleMode, menuMode, symbolMode, fullMode, listMode -}; -enum optionMode { - normalOpt = 0, allOpt, promptOpt -}; - -class ConfigList : public Q3ListView { - Q_OBJECT - typedef class Q3ListView Parent; -public: - ConfigList(ConfigView* p, const char *name = 0); - void reinit(void); - ConfigView* parent(void) const - { - return (ConfigView*)Parent::parent(); - } - ConfigItem* findConfigItem(struct menu *); - -protected: - void keyPressEvent(QKeyEvent *e); - void contentsMousePressEvent(QMouseEvent *e); - void contentsMouseReleaseEvent(QMouseEvent *e); - void contentsMouseMoveEvent(QMouseEvent *e); - void contentsMouseDoubleClickEvent(QMouseEvent *e); - void focusInEvent(QFocusEvent *e); - void contextMenuEvent(QContextMenuEvent *e); - -public slots: - void setRootMenu(struct menu *menu); - - void updateList(ConfigItem *item); - void setValue(ConfigItem* item, tristate val); - void changeValue(ConfigItem* item); - void updateSelection(void); - void saveSettings(void); -signals: - void menuChanged(struct menu *menu); - void menuSelected(struct menu *menu); - void parentSelected(void); - void gotFocus(struct menu *); - -public: - void updateListAll(void) - { - updateAll = true; - updateList(NULL); - updateAll = false; - } - ConfigList* listView() - { - return this; - } - ConfigItem* firstChild() const - { - return (ConfigItem *)Parent::firstChild(); - } - int mapIdx(colIdx idx) - { - return colMap[idx]; - } - void addColumn(colIdx idx, const QString& label) - { - colMap[idx] = Parent::addColumn(label); - colRevMap[colMap[idx]] = idx; - } - void removeColumn(colIdx idx) - { - int col = colMap[idx]; - if (col >= 0) { - Parent::removeColumn(col); - colRevMap[col] = colMap[idx] = -1; - } - } - void setAllOpen(bool open); - void setParentMenu(void); - - bool menuSkip(struct menu *); - - template <class P> - void updateMenuList(P*, struct menu*); - - bool updateAll; - - QPixmap symbolYesPix, symbolModPix, symbolNoPix; - QPixmap choiceYesPix, choiceNoPix; - QPixmap menuPix, menuInvPix, menuBackPix, voidPix; - - bool showName, showRange, showData; - enum listMode mode; - enum optionMode optMode; - struct menu *rootEntry; - QColorGroup disabledColorGroup; - QColorGroup inactivedColorGroup; - Q3PopupMenu* headerPopup; - -private: - int colMap[colNr]; - int colRevMap[colNr]; -}; - -class ConfigItem : public Q3ListViewItem { - typedef class Q3ListViewItem Parent; -public: - ConfigItem(Q3ListView *parent, ConfigItem *after, struct menu *m, bool v) - : Parent(parent, after), menu(m), visible(v), goParent(false) - { - init(); - } - ConfigItem(ConfigItem *parent, ConfigItem *after, struct menu *m, bool v) - : Parent(parent, after), menu(m), visible(v), goParent(false) - { - init(); - } - ConfigItem(Q3ListView *parent, ConfigItem *after, bool v) - : Parent(parent, after), menu(0), visible(v), goParent(true) - { - init(); - } - ~ConfigItem(void); - void init(void); - void okRename(int col); - void updateMenu(void); - void testUpdateMenu(bool v); - ConfigList* listView() const - { - return (ConfigList*)Parent::listView(); - } - ConfigItem* firstChild() const - { - return (ConfigItem *)Parent::firstChild(); - } - ConfigItem* nextSibling() const - { - return (ConfigItem *)Parent::nextSibling(); - } - void setText(colIdx idx, const QString& text) - { - Parent::setText(listView()->mapIdx(idx), text); - } - QString text(colIdx idx) const - { - return Parent::text(listView()->mapIdx(idx)); - } - void setPixmap(colIdx idx, const QPixmap& pm) - { - Parent::setPixmap(listView()->mapIdx(idx), pm); - } - const QPixmap* pixmap(colIdx idx) const - { - return Parent::pixmap(listView()->mapIdx(idx)); - } - void paintCell(QPainter* p, const QColorGroup& cg, int column, int width, int align); - - ConfigItem* nextItem; - struct menu *menu; - bool visible; - bool goParent; -}; - -class ConfigLineEdit : public QLineEdit { - Q_OBJECT - typedef class QLineEdit Parent; -public: - ConfigLineEdit(ConfigView* parent); - ConfigView* parent(void) const - { - return (ConfigView*)Parent::parent(); - } - void show(ConfigItem *i); - void keyPressEvent(QKeyEvent *e); - -public: - ConfigItem *item; -}; - -class ConfigView : public Q3VBox { - Q_OBJECT - typedef class Q3VBox Parent; -public: - ConfigView(QWidget* parent, const char *name = 0); - ~ConfigView(void); - static void updateList(ConfigItem* item); - static void updateListAll(void); - - bool showName(void) const { return list->showName; } - bool showRange(void) const { return list->showRange; } - bool showData(void) const { return list->showData; } -public slots: - void setShowName(bool); - void setShowRange(bool); - void setShowData(bool); - void setOptionMode(QAction *); -signals: - void showNameChanged(bool); - void showRangeChanged(bool); - void showDataChanged(bool); -public: - ConfigList* list; - ConfigLineEdit* lineEdit; - - static ConfigView* viewList; - ConfigView* nextView; - - static QAction *showNormalAction; - static QAction *showAllAction; - static QAction *showPromptAction; -}; - -class ConfigInfoView : public Q3TextBrowser { - Q_OBJECT - typedef class Q3TextBrowser Parent; -public: - ConfigInfoView(QWidget* parent, const char *name = 0); - bool showDebug(void) const { return _showDebug; } - -public slots: - void setInfo(struct menu *menu); - void saveSettings(void); - void setShowDebug(bool); - -signals: - void showDebugChanged(bool); - void menuSelected(struct menu *); - -protected: - void symbolInfo(void); - void menuInfo(void); - QString debug_info(struct symbol *sym); - static QString print_filter(const QString &str); - static void expr_print_help(void *data, struct symbol *sym, const char *str); - Q3PopupMenu* createPopupMenu(const QPoint& pos); - void contentsContextMenuEvent(QContextMenuEvent *e); - - struct symbol *sym; - struct menu *_menu; - bool _showDebug; -}; - -class ConfigSearchWindow : public QDialog { - Q_OBJECT - typedef class QDialog Parent; -public: - ConfigSearchWindow(ConfigMainWindow* parent, const char *name = 0); - -public slots: - void saveSettings(void); - void search(void); - -protected: - QLineEdit* editField; - QPushButton* searchButton; - QSplitter* split; - ConfigView* list; - ConfigInfoView* info; - - struct symbol **result; -}; - -class ConfigMainWindow : public Q3MainWindow { - Q_OBJECT - - static Q3Action *saveAction; - static void conf_changed(void); -public: - ConfigMainWindow(void); -public slots: - void changeMenu(struct menu *); - void setMenuLink(struct menu *); - void listFocusChanged(void); - void goBack(void); - void loadConfig(void); - bool saveConfig(void); - void saveConfigAs(void); - void searchConfig(void); - void showSingleView(void); - void showSplitView(void); - void showFullView(void); - void showIntro(void); - void showAbout(void); - void saveSettings(void); - -protected: - void closeEvent(QCloseEvent *e); - - ConfigSearchWindow *searchWindow; - ConfigView *menuView; - ConfigList *menuList; - ConfigView *configView; - ConfigList *configList; - ConfigInfoView *helpText; - Q3ToolBar *toolBar; - Q3Action *backAction; - QSplitter* split1; - QSplitter* split2; -}; diff --git a/payloads/external/SeaBIOS/scripts/kconfig/streamline_config.pl b/payloads/external/SeaBIOS/scripts/kconfig/streamline_config.pl deleted file mode 100644 index 9cb8522d..00000000 --- a/payloads/external/SeaBIOS/scripts/kconfig/streamline_config.pl +++ /dev/null @@ -1,647 +0,0 @@ -#!/usr/bin/perl -w -# -# Copyright 2005-2009 - Steven Rostedt -# Licensed under the terms of the GNU GPL License version 2 -# -# It's simple enough to figure out how this works. -# If not, then you can ask me at stripconfig@goodmis.org -# -# What it does? -# -# If you have installed a Linux kernel from a distribution -# that turns on way too many modules than you need, and -# you only want the modules you use, then this program -# is perfect for you. -# -# It gives you the ability to turn off all the modules that are -# not loaded on your system. -# -# Howto: -# -# 1. Boot up the kernel that you want to stream line the config on. -# 2. Change directory to the directory holding the source of the -# kernel that you just booted. -# 3. Copy the configuraton file to this directory as .config -# 4. Have all your devices that you need modules for connected and -# operational (make sure that their corresponding modules are loaded) -# 5. Run this script redirecting the output to some other file -# like config_strip. -# 6. Back up your old config (if you want too). -# 7. copy the config_strip file to .config -# 8. Run "make oldconfig" -# -# Now your kernel is ready to be built with only the modules that -# are loaded. -# -# Here's what I did with my Debian distribution. -# -# cd /usr/src/linux-2.6.10 -# cp /boot/config-2.6.10-1-686-smp .config -# ~/bin/streamline_config > config_strip -# mv .config config_sav -# mv config_strip .config -# make oldconfig -# -use strict; -use Getopt::Long; - -# set the environment variable LOCALMODCONFIG_DEBUG to get -# debug output. -my $debugprint = 0; -$debugprint = 1 if (defined($ENV{LOCALMODCONFIG_DEBUG})); - -sub dprint { - return if (!$debugprint); - print STDERR @_; -} - -my $config = ".config"; - -my $uname = `uname -r`; -chomp $uname; - -my @searchconfigs = ( - { - "file" => ".config", - "exec" => "cat", - }, - { - "file" => "/proc/config.gz", - "exec" => "zcat", - }, - { - "file" => "/boot/config-$uname", - "exec" => "cat", - }, - { - "file" => "/boot/vmlinuz-$uname", - "exec" => "scripts/extract-ikconfig", - "test" => "scripts/extract-ikconfig", - }, - { - "file" => "vmlinux", - "exec" => "scripts/extract-ikconfig", - "test" => "scripts/extract-ikconfig", - }, - { - "file" => "/lib/modules/$uname/kernel/kernel/configs.ko", - "exec" => "scripts/extract-ikconfig", - "test" => "scripts/extract-ikconfig", - }, - { - "file" => "kernel/configs.ko", - "exec" => "scripts/extract-ikconfig", - "test" => "scripts/extract-ikconfig", - }, - { - "file" => "kernel/configs.o", - "exec" => "scripts/extract-ikconfig", - "test" => "scripts/extract-ikconfig", - }, -); - -sub read_config { - foreach my $conf (@searchconfigs) { - my $file = $conf->{"file"}; - - next if ( ! -f "$file"); - - if (defined($conf->{"test"})) { - `$conf->{"test"} $conf->{"file"} 2>/dev/null`; - next if ($?); - } - - my $exec = $conf->{"exec"}; - - print STDERR "using config: '$file'\n"; - - open(my $infile, '-|', "$exec $file") || die "Failed to run $exec $file"; - my @x = <$infile>; - close $infile; - return @x; - } - die "No config file found"; -} - -my @config_file = read_config; - -# Parse options -my $localmodconfig = 0; -my $localyesconfig = 0; - -GetOptions("localmodconfig" => \$localmodconfig, - "localyesconfig" => \$localyesconfig); - -# Get the build source and top level Kconfig file (passed in) -my $ksource = ($ARGV[0] ? $ARGV[0] : '.'); -my $kconfig = $ARGV[1]; -my $lsmod_file = $ENV{'LSMOD'}; - -my @makefiles = `find $ksource -name Makefile 2>/dev/null`; -chomp @makefiles; - -my %depends; -my %selects; -my %prompts; -my %objects; -my $var; -my $iflevel = 0; -my @ifdeps; - -# prevent recursion -my %read_kconfigs; - -sub read_kconfig { - my ($kconfig) = @_; - - my $state = "NONE"; - my $config; - - my $cont = 0; - my $line; - - my $source = "$ksource/$kconfig"; - my $last_source = ""; - - # Check for any environment variables used - while ($source =~ /\$(\w+)/ && $last_source ne $source) { - my $env = $1; - $last_source = $source; - $source =~ s/\$$env/$ENV{$env}/; - } - - open(my $kinfile, '<', $source) || die "Can't open $kconfig"; - while (<$kinfile>) { - chomp; - - # Make sure that lines ending with \ continue - if ($cont) { - $_ = $line . " " . $_; - } - - if (s/\\$//) { - $cont = 1; - $line = $_; - next; - } - - $cont = 0; - - # collect any Kconfig sources - if (/^source\s*"(.*)"/) { - my $kconfig = $1; - # prevent reading twice. - if (!defined($read_kconfigs{$kconfig})) { - $read_kconfigs{$kconfig} = 1; - read_kconfig($kconfig); - } - next; - } - - # configs found - if (/^\s*(menu)?config\s+(\S+)\s*$/) { - $state = "NEW"; - $config = $2; - - # Add depends for 'if' nesting - for (my $i = 0; $i < $iflevel; $i++) { - if ($i) { - $depends{$config} .= " " . $ifdeps[$i]; - } else { - $depends{$config} = $ifdeps[$i]; - } - $state = "DEP"; - } - - # collect the depends for the config - } elsif ($state eq "NEW" && /^\s*depends\s+on\s+(.*)$/) { - $state = "DEP"; - $depends{$config} = $1; - } elsif ($state eq "DEP" && /^\s*depends\s+on\s+(.*)$/) { - $depends{$config} .= " " . $1; - } elsif ($state eq "DEP" && /^\s*def(_(bool|tristate)|ault)\s+(\S.*)$/) { - my $dep = $3; - if ($dep !~ /^\s*(y|m|n)\s*$/) { - $dep =~ s/.*\sif\s+//; - $depends{$config} .= " " . $dep; - dprint "Added default depends $dep to $config\n"; - } - - # Get the configs that select this config - } elsif ($state ne "NONE" && /^\s*select\s+(\S+)/) { - my $conf = $1; - if (defined($selects{$conf})) { - $selects{$conf} .= " " . $config; - } else { - $selects{$conf} = $config; - } - - # configs without prompts must be selected - } elsif ($state ne "NONE" && /^\s*tristate\s\S/) { - # note if the config has a prompt - $prompts{$config} = 1; - - # Check for if statements - } elsif (/^if\s+(.*\S)\s*$/) { - my $deps = $1; - # remove beginning and ending non text - $deps =~ s/^[^a-zA-Z0-9_]*//; - $deps =~ s/[^a-zA-Z0-9_]*$//; - - my @deps = split /[^a-zA-Z0-9_]+/, $deps; - - $ifdeps[$iflevel++] = join ':', @deps; - - } elsif (/^endif/) { - - $iflevel-- if ($iflevel); - - # stop on "help" - } elsif (/^\s*help\s*$/) { - $state = "NONE"; - } - } - close($kinfile); -} - -if ($kconfig) { - read_kconfig($kconfig); -} - -# Makefiles can use variables to define their dependencies -sub convert_vars { - my ($line, %vars) = @_; - - my $process = ""; - - while ($line =~ s/^(.*?)(\$\((.*?)\))//) { - my $start = $1; - my $variable = $2; - my $var = $3; - - if (defined($vars{$var})) { - $process .= $start . $vars{$var}; - } else { - $process .= $start . $variable; - } - } - - $process .= $line; - - return $process; -} - -# Read all Makefiles to map the configs to the objects -foreach my $makefile (@makefiles) { - - my $line = ""; - my %make_vars; - - open(my $infile, '<', $makefile) || die "Can't open $makefile"; - while (<$infile>) { - # if this line ends with a backslash, continue - chomp; - if (/^(.*)\\$/) { - $line .= $1; - next; - } - - $line .= $_; - $_ = $line; - $line = ""; - - my $objs; - - # Convert variables in a line (could define configs) - $_ = convert_vars($_, %make_vars); - - # collect objects after obj-$(CONFIG_FOO_BAR) - if (/obj-\$\((CONFIG_[^\)]*)\)\s*[+:]?=\s*(.*)/) { - $var = $1; - $objs = $2; - - # check if variables are set - } elsif (/^\s*(\S+)\s*[:]?=\s*(.*\S)/) { - $make_vars{$1} = $2; - } - if (defined($objs)) { - foreach my $obj (split /\s+/,$objs) { - $obj =~ s/-/_/g; - if ($obj =~ /(.*)\.o$/) { - # Objects may be enabled by more than one config. - # Store configs in an array. - my @arr; - - if (defined($objects{$1})) { - @arr = @{$objects{$1}}; - } - - $arr[$#arr+1] = $var; - - # The objects have a hash mapping to a reference - # of an array of configs. - $objects{$1} = \@arr; - } - } - } - } - close($infile); -} - -my %modules; -my $linfile; - -if (defined($lsmod_file)) { - if ( ! -f $lsmod_file) { - if ( -f $ENV{'objtree'}."/".$lsmod_file) { - $lsmod_file = $ENV{'objtree'}."/".$lsmod_file; - } else { - die "$lsmod_file not found"; - } - } - - my $otype = ( -x $lsmod_file) ? '-|' : '<'; - open($linfile, $otype, $lsmod_file); - -} else { - - # see what modules are loaded on this system - my $lsmod; - - foreach my $dir ( ("/sbin", "/bin", "/usr/sbin", "/usr/bin") ) { - if ( -x "$dir/lsmod" ) { - $lsmod = "$dir/lsmod"; - last; - } -} - if (!defined($lsmod)) { - # try just the path - $lsmod = "lsmod"; - } - - open($linfile, '-|', $lsmod) || die "Can not call lsmod with $lsmod"; -} - -while (<$linfile>) { - next if (/^Module/); # Skip the first line. - if (/^(\S+)/) { - $modules{$1} = 1; - } -} -close ($linfile); - -# add to the configs hash all configs that are needed to enable -# a loaded module. This is a direct obj-${CONFIG_FOO} += bar.o -# where we know we need bar.o so we add FOO to the list. -my %configs; -foreach my $module (keys(%modules)) { - if (defined($objects{$module})) { - my @arr = @{$objects{$module}}; - foreach my $conf (@arr) { - $configs{$conf} = $module; - dprint "$conf added by direct ($module)\n"; - if ($debugprint) { - my $c=$conf; - $c =~ s/^CONFIG_//; - if (defined($depends{$c})) { - dprint " deps = $depends{$c}\n"; - } else { - dprint " no deps\n"; - } - } - } - } else { - # Most likely, someone has a custom (binary?) module loaded. - print STDERR "$module config not found!!\n"; - } -} - -# Read the current config, and see what is enabled. We want to -# ignore configs that we would not enable anyway. - -my %orig_configs; -my $valid = "A-Za-z_0-9"; - -foreach my $line (@config_file) { - $_ = $line; - - if (/(CONFIG_[$valid]*)=(m|y)/) { - $orig_configs{$1} = $2; - } -} - -my $repeat = 1; - -my $depconfig; - -# -# Note, we do not care about operands (like: &&, ||, !) we want to add any -# config that is in the depend list of another config. This script does -# not enable configs that are not already enabled. If we come across a -# config A that depends on !B, we can still add B to the list of depends -# to keep on. If A was on in the original config, B would not have been -# and B would not be turned on by this script. -# -sub parse_config_depends -{ - my ($p) = @_; - - while ($p =~ /[$valid]/) { - - if ($p =~ /^[^$valid]*([$valid]+)/) { - my $conf = "CONFIG_" . $1; - - $p =~ s/^[^$valid]*[$valid]+//; - - # We only need to process if the depend config is a module - if (!defined($orig_configs{$conf}) || !$orig_configs{conf} eq "m") { - next; - } - - if (!defined($configs{$conf})) { - # We must make sure that this config has its - # dependencies met. - $repeat = 1; # do again - dprint "$conf selected by depend $depconfig\n"; - $configs{$conf} = 1; - } - } else { - die "this should never happen"; - } - } -} - -# Select is treated a bit differently than depends. We call this -# when a config has no prompt and requires another config to be -# selected. We use to just select all configs that selected this -# config, but found that that can balloon into enabling hundreds -# of configs that we do not care about. -# -# The idea is we look at all the configs that select it. If one -# is already in our list of configs to enable, then there's nothing -# else to do. If there isn't, we pick the first config that was -# enabled in the orignal config and use that. -sub parse_config_selects -{ - my ($config, $p) = @_; - - my $next_config; - - while ($p =~ /[$valid]/) { - - if ($p =~ /^[^$valid]*([$valid]+)/) { - my $conf = "CONFIG_" . $1; - - $p =~ s/^[^$valid]*[$valid]+//; - - # Make sure that this config exists in the current .config file - if (!defined($orig_configs{$conf})) { - dprint "$conf not set for $config select\n"; - next; - } - - # Check if something other than a module selects this config - if (defined($orig_configs{$conf}) && $orig_configs{$conf} ne "m") { - dprint "$conf (non module) selects config, we are good\n"; - # we are good with this - return; - } - if (defined($configs{$conf})) { - dprint "$conf selects $config so we are good\n"; - # A set config selects this config, we are good - return; - } - # Set this config to be selected - if (!defined($next_config)) { - $next_config = $conf; - } - } else { - die "this should never happen"; - } - } - - # If no possible config selected this, then something happened. - if (!defined($next_config)) { - print STDERR "WARNING: $config is required, but nothing in the\n"; - print STDERR " current config selects it.\n"; - return; - } - - # If we are here, then we found no config that is set and - # selects this config. Repeat. - $repeat = 1; - # Make this config need to be selected - $configs{$next_config} = 1; - dprint "$next_config selected by select $config\n"; -} - -my %process_selects; - -# loop through all configs, select their dependencies. -sub loop_depend { - $repeat = 1; - - while ($repeat) { - $repeat = 0; - - forloop: - foreach my $config (keys %configs) { - - # If this config is not a module, we do not need to process it - if (defined($orig_configs{$config}) && $orig_configs{$config} ne "m") { - next forloop; - } - - $config =~ s/^CONFIG_//; - $depconfig = $config; - - if (defined($depends{$config})) { - # This config has dependencies. Make sure they are also included - parse_config_depends $depends{$config}; - } - - # If the config has no prompt, then we need to check if a config - # that is enabled selected it. Or if we need to enable one. - if (!defined($prompts{$config}) && defined($selects{$config})) { - $process_selects{$config} = 1; - } - } - } -} - -sub loop_select { - - foreach my $config (keys %process_selects) { - $config =~ s/^CONFIG_//; - - dprint "Process select $config\n"; - - # config has no prompt and must be selected. - parse_config_selects $config, $selects{$config}; - } -} - -while ($repeat) { - # Get the first set of configs and their dependencies. - loop_depend; - - $repeat = 0; - - # Now we need to see if we have to check selects; - loop_select; -} - -my %setconfigs; - -# Finally, read the .config file and turn off any module enabled that -# we could not find a reason to keep enabled. -foreach my $line (@config_file) { - $_ = $line; - - if (/CONFIG_IKCONFIG/) { - if (/# CONFIG_IKCONFIG is not set/) { - # enable IKCONFIG at least as a module - print "CONFIG_IKCONFIG=m\n"; - # don't ask about PROC - print "# CONFIG_IKCONFIG_PROC is not set\n"; - } else { - print; - } - next; - } - - if (/^(CONFIG.*)=(m|y)/) { - if (defined($configs{$1})) { - if ($localyesconfig) { - $setconfigs{$1} = 'y'; - print "$1=y\n"; - next; - } else { - $setconfigs{$1} = $2; - } - } elsif ($2 eq "m") { - print "# $1 is not set\n"; - next; - } - } - print; -} - -# Integrity check, make sure all modules that we want enabled do -# indeed have their configs set. -loop: -foreach my $module (keys(%modules)) { - if (defined($objects{$module})) { - my @arr = @{$objects{$module}}; - foreach my $conf (@arr) { - if (defined($setconfigs{$conf})) { - next loop; - } - } - print STDERR "module $module did not have configs"; - foreach my $conf (@arr) { - print STDERR " " , $conf; - } - print STDERR "\n"; - } -} diff --git a/payloads/external/SeaBIOS/scripts/kconfig/symbol.c b/payloads/external/SeaBIOS/scripts/kconfig/symbol.c deleted file mode 100644 index 7caabdb5..00000000 --- a/payloads/external/SeaBIOS/scripts/kconfig/symbol.c +++ /dev/null @@ -1,1373 +0,0 @@ -/* - * Copyright (C) 2002 Roman Zippel <zippel@linux-m68k.org> - * Released under the terms of the GNU GPL v2.0. - */ - -#include <ctype.h> -#include <stdlib.h> -#include <string.h> -#include <regex.h> -#include <sys/utsname.h> - -#include "lkc.h" - -struct symbol symbol_yes = { - .name = "y", - .curr = { "y", yes }, - .flags = SYMBOL_CONST|SYMBOL_VALID, -}, symbol_mod = { - .name = "m", - .curr = { "m", mod }, - .flags = SYMBOL_CONST|SYMBOL_VALID, -}, symbol_no = { - .name = "n", - .curr = { "n", no }, - .flags = SYMBOL_CONST|SYMBOL_VALID, -}, symbol_empty = { - .name = "", - .curr = { "", no }, - .flags = SYMBOL_VALID, -}; - -struct symbol *sym_defconfig_list; -struct symbol *modules_sym; -tristate modules_val; - -struct expr *sym_env_list; - -static void sym_add_default(struct symbol *sym, const char *def) -{ - struct property *prop = prop_alloc(P_DEFAULT, sym); - - prop->expr = expr_alloc_symbol(sym_lookup(def, SYMBOL_CONST)); -} - -void sym_init(void) -{ - struct symbol *sym; - struct utsname uts; - static bool inited = false; - - if (inited) - return; - inited = true; - - uname(&uts); - - sym = sym_lookup("UNAME_RELEASE", 0); - sym->type = S_STRING; - sym->flags |= SYMBOL_AUTO; - sym_add_default(sym, uts.release); -} - -enum symbol_type sym_get_type(struct symbol *sym) -{ - enum symbol_type type = sym->type; - - if (type == S_TRISTATE) { - if (sym_is_choice_value(sym) && sym->visible == yes) - type = S_BOOLEAN; - else if (modules_val == no) - type = S_BOOLEAN; - } - return type; -} - -const char *sym_type_name(enum symbol_type type) -{ - switch (type) { - case S_BOOLEAN: - return "boolean"; - case S_TRISTATE: - return "tristate"; - case S_INT: - return "integer"; - case S_HEX: - return "hex"; - case S_STRING: - return "string"; - case S_UNKNOWN: - return "unknown"; - case S_OTHER: - break; - } - return "???"; -} - -struct property *sym_get_choice_prop(struct symbol *sym) -{ - struct property *prop; - - for_all_choices(sym, prop) - return prop; - return NULL; -} - -struct property *sym_get_env_prop(struct symbol *sym) -{ - struct property *prop; - - for_all_properties(sym, prop, P_ENV) - return prop; - return NULL; -} - -struct property *sym_get_default_prop(struct symbol *sym) -{ - struct property *prop; - - for_all_defaults(sym, prop) { - prop->visible.tri = expr_calc_value(prop->visible.expr); - if (prop->visible.tri != no) - return prop; - } - return NULL; -} - -static struct property *sym_get_range_prop(struct symbol *sym) -{ - struct property *prop; - - for_all_properties(sym, prop, P_RANGE) { - prop->visible.tri = expr_calc_value(prop->visible.expr); - if (prop->visible.tri != no) - return prop; - } - return NULL; -} - -static long long sym_get_range_val(struct symbol *sym, int base) -{ - sym_calc_value(sym); - switch (sym->type) { - case S_INT: - base = 10; - break; - case S_HEX: - base = 16; - break; - default: - break; - } - return strtoll(sym->curr.val, NULL, base); -} - -static void sym_validate_range(struct symbol *sym) -{ - struct property *prop; - int base; - long long val, val2; - char str[64]; - - switch (sym->type) { - case S_INT: - base = 10; - break; - case S_HEX: - base = 16; - break; - default: - return; - } - prop = sym_get_range_prop(sym); - if (!prop) - return; - val = strtoll(sym->curr.val, NULL, base); - val2 = sym_get_range_val(prop->expr->left.sym, base); - if (val >= val2) { - val2 = sym_get_range_val(prop->expr->right.sym, base); - if (val <= val2) - return; - } - if (sym->type == S_INT) - sprintf(str, "%lld", val2); - else - sprintf(str, "0x%llx", val2); - sym->curr.val = strdup(str); -} - -static void sym_calc_visibility(struct symbol *sym) -{ - struct property *prop; - tristate tri; - - /* any prompt visible? */ - tri = no; - for_all_prompts(sym, prop) { - prop->visible.tri = expr_calc_value(prop->visible.expr); - tri = EXPR_OR(tri, prop->visible.tri); - } - if (tri == mod && (sym->type != S_TRISTATE || modules_val == no)) - tri = yes; - if (sym->visible != tri) { - sym->visible = tri; - sym_set_changed(sym); - } - if (sym_is_choice_value(sym)) - return; - /* defaulting to "yes" if no explicit "depends on" are given */ - tri = yes; - if (sym->dir_dep.expr) - tri = expr_calc_value(sym->dir_dep.expr); - if (tri == mod) - tri = yes; - if (sym->dir_dep.tri != tri) { - sym->dir_dep.tri = tri; - sym_set_changed(sym); - } - tri = no; - if (sym->rev_dep.expr) - tri = expr_calc_value(sym->rev_dep.expr); - if (tri == mod && sym_get_type(sym) == S_BOOLEAN) - tri = yes; - if (sym->rev_dep.tri != tri) { - sym->rev_dep.tri = tri; - sym_set_changed(sym); - } -} - -/* - * Find the default symbol for a choice. - * First try the default values for the choice symbol - * Next locate the first visible choice value - * Return NULL if none was found - */ -struct symbol *sym_choice_default(struct symbol *sym) -{ - struct symbol *def_sym; - struct property *prop; - struct expr *e; - - /* any of the defaults visible? */ - for_all_defaults(sym, prop) { - prop->visible.tri = expr_calc_value(prop->visible.expr); - if (prop->visible.tri == no) - continue; - def_sym = prop_get_symbol(prop); - if (def_sym->visible != no) - return def_sym; - } - - /* just get the first visible value */ - prop = sym_get_choice_prop(sym); - expr_list_for_each_sym(prop->expr, e, def_sym) - if (def_sym->visible != no) - return def_sym; - - /* failed to locate any defaults */ - return NULL; -} - -static struct symbol *sym_calc_choice(struct symbol *sym) -{ - struct symbol *def_sym; - struct property *prop; - struct expr *e; - int flags; - - /* first calculate all choice values' visibilities */ - flags = sym->flags; - prop = sym_get_choice_prop(sym); - expr_list_for_each_sym(prop->expr, e, def_sym) { - sym_calc_visibility(def_sym); - if (def_sym->visible != no) - flags &= def_sym->flags; - } - - sym->flags &= flags | ~SYMBOL_DEF_USER; - - /* is the user choice visible? */ - def_sym = sym->def[S_DEF_USER].val; - if (def_sym && def_sym->visible != no) - return def_sym; - - def_sym = sym_choice_default(sym); - - if (def_sym == NULL) - /* no choice? reset tristate value */ - sym->curr.tri = no; - - return def_sym; -} - -void sym_calc_value(struct symbol *sym) -{ - struct symbol_value newval, oldval; - struct property *prop; - struct expr *e; - - if (!sym) - return; - - if (sym->flags & SYMBOL_VALID) - return; - - if (sym_is_choice_value(sym) && - sym->flags & SYMBOL_NEED_SET_CHOICE_VALUES) { - sym->flags &= ~SYMBOL_NEED_SET_CHOICE_VALUES; - prop = sym_get_choice_prop(sym); - sym_calc_value(prop_get_symbol(prop)); - } - - sym->flags |= SYMBOL_VALID; - - oldval = sym->curr; - - switch (sym->type) { - case S_INT: - case S_HEX: - case S_STRING: - newval = symbol_empty.curr; - break; - case S_BOOLEAN: - case S_TRISTATE: - newval = symbol_no.curr; - break; - default: - sym->curr.val = sym->name; - sym->curr.tri = no; - return; - } - if (!sym_is_choice_value(sym)) - sym->flags &= ~SYMBOL_WRITE; - - sym_calc_visibility(sym); - - /* set default if recursively called */ - sym->curr = newval; - - switch (sym_get_type(sym)) { - case S_BOOLEAN: - case S_TRISTATE: - if (sym_is_choice_value(sym) && sym->visible == yes) { - prop = sym_get_choice_prop(sym); - newval.tri = (prop_get_symbol(prop)->curr.val == sym) ? yes : no; - } else { - if (sym->visible != no) { - /* if the symbol is visible use the user value - * if available, otherwise try the default value - */ - sym->flags |= SYMBOL_WRITE; - if (sym_has_value(sym)) { - newval.tri = EXPR_AND(sym->def[S_DEF_USER].tri, - sym->visible); - goto calc_newval; - } - } - if (sym->rev_dep.tri != no) - sym->flags |= SYMBOL_WRITE; - if (!sym_is_choice(sym)) { - prop = sym_get_default_prop(sym); - if (prop) { - sym->flags |= SYMBOL_WRITE; - newval.tri = EXPR_AND(expr_calc_value(prop->expr), - prop->visible.tri); - } - } - calc_newval: - if (sym->dir_dep.tri == no && sym->rev_dep.tri != no) { - struct expr *e; - e = expr_simplify_unmet_dep(sym->rev_dep.expr, - sym->dir_dep.expr); - fprintf(stderr, "warning: ("); - expr_fprint(e, stderr); - fprintf(stderr, ") selects %s which has unmet direct dependencies (", - sym->name); - expr_fprint(sym->dir_dep.expr, stderr); - fprintf(stderr, ")\n"); - expr_free(e); - } - newval.tri = EXPR_OR(newval.tri, sym->rev_dep.tri); - } - if (newval.tri == mod && sym_get_type(sym) == S_BOOLEAN) - newval.tri = yes; - break; - case S_STRING: - case S_HEX: - case S_INT: - if (sym->visible != no) { - sym->flags |= SYMBOL_WRITE; - if (sym_has_value(sym)) { - newval.val = sym->def[S_DEF_USER].val; - break; - } - } - prop = sym_get_default_prop(sym); - if (prop) { - struct symbol *ds = prop_get_symbol(prop); - if (ds) { - sym->flags |= SYMBOL_WRITE; - sym_calc_value(ds); - newval.val = ds->curr.val; - } - } - break; - default: - ; - } - - sym->curr = newval; - if (sym_is_choice(sym) && newval.tri == yes) - sym->curr.val = sym_calc_choice(sym); - sym_validate_range(sym); - - if (memcmp(&oldval, &sym->curr, sizeof(oldval))) { - sym_set_changed(sym); - if (modules_sym == sym) { - sym_set_all_changed(); - modules_val = modules_sym->curr.tri; - } - } - - if (sym_is_choice(sym)) { - struct symbol *choice_sym; - - prop = sym_get_choice_prop(sym); - expr_list_for_each_sym(prop->expr, e, choice_sym) { - if ((sym->flags & SYMBOL_WRITE) && - choice_sym->visible != no) - choice_sym->flags |= SYMBOL_WRITE; - if (sym->flags & SYMBOL_CHANGED) - sym_set_changed(choice_sym); - } - } - - if (sym->flags & SYMBOL_AUTO) - sym->flags &= ~SYMBOL_WRITE; - - if (sym->flags & SYMBOL_NEED_SET_CHOICE_VALUES) - set_all_choice_values(sym); -} - -void sym_clear_all_valid(void) -{ - struct symbol *sym; - int i; - - for_all_symbols(i, sym) - sym->flags &= ~SYMBOL_VALID; - sym_add_change_count(1); - if (modules_sym) - sym_calc_value(modules_sym); -} - -void sym_set_changed(struct symbol *sym) -{ - struct property *prop; - - sym->flags |= SYMBOL_CHANGED; - for (prop = sym->prop; prop; prop = prop->next) { - if (prop->menu) - prop->menu->flags |= MENU_CHANGED; - } -} - -void sym_set_all_changed(void) -{ - struct symbol *sym; - int i; - - for_all_symbols(i, sym) - sym_set_changed(sym); -} - -bool sym_tristate_within_range(struct symbol *sym, tristate val) -{ - int type = sym_get_type(sym); - - if (sym->visible == no) - return false; - - if (type != S_BOOLEAN && type != S_TRISTATE) - return false; - - if (type == S_BOOLEAN && val == mod) - return false; - if (sym->visible <= sym->rev_dep.tri) - return false; - if (sym_is_choice_value(sym) && sym->visible == yes) - return val == yes; - return val >= sym->rev_dep.tri && val <= sym->visible; -} - -bool sym_set_tristate_value(struct symbol *sym, tristate val) -{ - tristate oldval = sym_get_tristate_value(sym); - - if (oldval != val && !sym_tristate_within_range(sym, val)) - return false; - - if (!(sym->flags & SYMBOL_DEF_USER)) { - sym->flags |= SYMBOL_DEF_USER; - sym_set_changed(sym); - } - /* - * setting a choice value also resets the new flag of the choice - * symbol and all other choice values. - */ - if (sym_is_choice_value(sym) && val == yes) { - struct symbol *cs = prop_get_symbol(sym_get_choice_prop(sym)); - struct property *prop; - struct expr *e; - - cs->def[S_DEF_USER].val = sym; - cs->flags |= SYMBOL_DEF_USER; - prop = sym_get_choice_prop(cs); - for (e = prop->expr; e; e = e->left.expr) { - if (e->right.sym->visible != no) - e->right.sym->flags |= SYMBOL_DEF_USER; - } - } - - sym->def[S_DEF_USER].tri = val; - if (oldval != val) - sym_clear_all_valid(); - - return true; -} - -tristate sym_toggle_tristate_value(struct symbol *sym) -{ - tristate oldval, newval; - - oldval = newval = sym_get_tristate_value(sym); - do { - switch (newval) { - case no: - newval = mod; - break; - case mod: - newval = yes; - break; - case yes: - newval = no; - break; - } - if (sym_set_tristate_value(sym, newval)) - break; - } while (oldval != newval); - return newval; -} - -bool sym_string_valid(struct symbol *sym, const char *str) -{ - signed char ch; - - switch (sym->type) { - case S_STRING: - return true; - case S_INT: - ch = *str++; - if (ch == '-') - ch = *str++; - if (!isdigit(ch)) - return false; - if (ch == '0' && *str != 0) - return false; - while ((ch = *str++)) { - if (!isdigit(ch)) - return false; - } - return true; - case S_HEX: - if (str[0] == '0' && (str[1] == 'x' || str[1] == 'X')) - str += 2; - ch = *str++; - do { - if (!isxdigit(ch)) - return false; - } while ((ch = *str++)); - return true; - case S_BOOLEAN: - case S_TRISTATE: - switch (str[0]) { - case 'y': case 'Y': - case 'm': case 'M': - case 'n': case 'N': - return true; - } - return false; - default: - return false; - } -} - -bool sym_string_within_range(struct symbol *sym, const char *str) -{ - struct property *prop; - long long val; - - switch (sym->type) { - case S_STRING: - return sym_string_valid(sym, str); - case S_INT: - if (!sym_string_valid(sym, str)) - return false; - prop = sym_get_range_prop(sym); - if (!prop) - return true; - val = strtoll(str, NULL, 10); - return val >= sym_get_range_val(prop->expr->left.sym, 10) && - val <= sym_get_range_val(prop->expr->right.sym, 10); - case S_HEX: - if (!sym_string_valid(sym, str)) - return false; - prop = sym_get_range_prop(sym); - if (!prop) - return true; - val = strtoll(str, NULL, 16); - return val >= sym_get_range_val(prop->expr->left.sym, 16) && - val <= sym_get_range_val(prop->expr->right.sym, 16); - case S_BOOLEAN: - case S_TRISTATE: - switch (str[0]) { - case 'y': case 'Y': - return sym_tristate_within_range(sym, yes); - case 'm': case 'M': - return sym_tristate_within_range(sym, mod); - case 'n': case 'N': - return sym_tristate_within_range(sym, no); - } - return false; - default: - return false; - } -} - -bool sym_set_string_value(struct symbol *sym, const char *newval) -{ - const char *oldval; - char *val; - int size; - - switch (sym->type) { - case S_BOOLEAN: - case S_TRISTATE: - switch (newval[0]) { - case 'y': case 'Y': - return sym_set_tristate_value(sym, yes); - case 'm': case 'M': - return sym_set_tristate_value(sym, mod); - case 'n': case 'N': - return sym_set_tristate_value(sym, no); - } - return false; - default: - ; - } - - if (!sym_string_within_range(sym, newval)) - return false; - - if (!(sym->flags & SYMBOL_DEF_USER)) { - sym->flags |= SYMBOL_DEF_USER; - sym_set_changed(sym); - } - - oldval = sym->def[S_DEF_USER].val; - size = strlen(newval) + 1; - if (sym->type == S_HEX && (newval[0] != '0' || (newval[1] != 'x' && newval[1] != 'X'))) { - size += 2; - sym->def[S_DEF_USER].val = val = xmalloc(size); - *val++ = '0'; - *val++ = 'x'; - } else if (!oldval || strcmp(oldval, newval)) - sym->def[S_DEF_USER].val = val = xmalloc(size); - else - return true; - - strcpy(val, newval); - free((void *)oldval); - sym_clear_all_valid(); - - return true; -} - -/* - * Find the default value associated to a symbol. - * For tristate symbol handle the modules=n case - * in which case "m" becomes "y". - * If the symbol does not have any default then fallback - * to the fixed default values. - */ -const char *sym_get_string_default(struct symbol *sym) -{ - struct property *prop; - struct symbol *ds; - const char *str; - tristate val; - - sym_calc_visibility(sym); - sym_calc_value(modules_sym); - val = symbol_no.curr.tri; - str = symbol_empty.curr.val; - - /* If symbol has a default value look it up */ - prop = sym_get_default_prop(sym); - if (prop != NULL) { - switch (sym->type) { - case S_BOOLEAN: - case S_TRISTATE: - /* The visibility may limit the value from yes => mod */ - val = EXPR_AND(expr_calc_value(prop->expr), prop->visible.tri); - break; - default: - /* - * The following fails to handle the situation - * where a default value is further limited by - * the valid range. - */ - ds = prop_get_symbol(prop); - if (ds != NULL) { - sym_calc_value(ds); - str = (const char *)ds->curr.val; - } - } - } - - /* Handle select statements */ - val = EXPR_OR(val, sym->rev_dep.tri); - - /* transpose mod to yes if modules are not enabled */ - if (val == mod) - if (!sym_is_choice_value(sym) && modules_sym->curr.tri == no) - val = yes; - - /* transpose mod to yes if type is bool */ - if (sym->type == S_BOOLEAN && val == mod) - val = yes; - - switch (sym->type) { - case S_BOOLEAN: - case S_TRISTATE: - switch (val) { - case no: return "n"; - case mod: return "m"; - case yes: return "y"; - } - case S_INT: - case S_HEX: - return str; - case S_STRING: - return str; - case S_OTHER: - case S_UNKNOWN: - break; - } - return ""; -} - -const char *sym_get_string_value(struct symbol *sym) -{ - tristate val; - - switch (sym->type) { - case S_BOOLEAN: - case S_TRISTATE: - val = sym_get_tristate_value(sym); - switch (val) { - case no: - return "n"; - case mod: - sym_calc_value(modules_sym); - return (modules_sym->curr.tri == no) ? "n" : "m"; - case yes: - return "y"; - } - break; - default: - ; - } - return (const char *)sym->curr.val; -} - -bool sym_is_changable(struct symbol *sym) -{ - return sym->visible > sym->rev_dep.tri; -} - -static unsigned strhash(const char *s) -{ - /* fnv32 hash */ - unsigned hash = 2166136261U; - for (; *s; s++) - hash = (hash ^ *s) * 0x01000193; - return hash; -} - -struct symbol *sym_lookup(const char *name, int flags) -{ - struct symbol *symbol; - char *new_name; - int hash; - - if (name) { - if (name[0] && !name[1]) { - switch (name[0]) { - case 'y': return &symbol_yes; - case 'm': return &symbol_mod; - case 'n': return &symbol_no; - } - } - hash = strhash(name) % SYMBOL_HASHSIZE; - - for (symbol = symbol_hash[hash]; symbol; symbol = symbol->next) { - if (symbol->name && - !strcmp(symbol->name, name) && - (flags ? symbol->flags & flags - : !(symbol->flags & (SYMBOL_CONST|SYMBOL_CHOICE)))) - return symbol; - } - new_name = strdup(name); - } else { - new_name = NULL; - hash = 0; - } - - symbol = xmalloc(sizeof(*symbol)); - memset(symbol, 0, sizeof(*symbol)); - symbol->name = new_name; - symbol->type = S_UNKNOWN; - symbol->flags |= flags; - - symbol->next = symbol_hash[hash]; - symbol_hash[hash] = symbol; - - return symbol; -} - -struct symbol *sym_find(const char *name) -{ - struct symbol *symbol = NULL; - int hash = 0; - - if (!name) - return NULL; - - if (name[0] && !name[1]) { - switch (name[0]) { - case 'y': return &symbol_yes; - case 'm': return &symbol_mod; - case 'n': return &symbol_no; - } - } - hash = strhash(name) % SYMBOL_HASHSIZE; - - for (symbol = symbol_hash[hash]; symbol; symbol = symbol->next) { - if (symbol->name && - !strcmp(symbol->name, name) && - !(symbol->flags & SYMBOL_CONST)) - break; - } - - return symbol; -} - -/* - * Expand symbol's names embedded in the string given in argument. Symbols' - * name to be expanded shall be prefixed by a '$'. Unknown symbol expands to - * the empty string. - */ -const char *sym_expand_string_value(const char *in) -{ - const char *src; - char *res; - size_t reslen; - - reslen = strlen(in) + 1; - res = xmalloc(reslen); - res[0] = '\0'; - - while ((src = strchr(in, '$'))) { - char *p, name[SYMBOL_MAXLENGTH]; - const char *symval = ""; - struct symbol *sym; - size_t newlen; - - strncat(res, in, src - in); - src++; - - p = name; - while (isalnum(*src) || *src == '_') - *p++ = *src++; - *p = '\0'; - - sym = sym_find(name); - if (sym != NULL) { - sym_calc_value(sym); - symval = sym_get_string_value(sym); - } - - newlen = strlen(res) + strlen(symval) + strlen(src) + 1; - if (newlen > reslen) { - reslen = newlen; - res = realloc(res, reslen); - } - - strcat(res, symval); - in = src; - } - strcat(res, in); - - return res; -} - -const char *sym_escape_string_value(const char *in) -{ - const char *p; - size_t reslen; - char *res; - size_t l; - - reslen = strlen(in) + strlen("\"\"") + 1; - - p = in; - for (;;) { - l = strcspn(p, "\"\\"); - p += l; - - if (p[0] == '\0') - break; - - reslen++; - p++; - } - - res = xmalloc(reslen); - res[0] = '\0'; - - strcat(res, "\""); - - p = in; - for (;;) { - l = strcspn(p, "\"\\"); - strncat(res, p, l); - p += l; - - if (p[0] == '\0') - break; - - strcat(res, "\\"); - strncat(res, p++, 1); - } - - strcat(res, "\""); - return res; -} - -struct sym_match { - struct symbol *sym; - off_t so, eo; -}; - -/* Compare matched symbols as thus: - * - first, symbols that match exactly - * - then, alphabetical sort - */ -static int sym_rel_comp(const void *sym1, const void *sym2) -{ - const struct sym_match *s1 = sym1; - const struct sym_match *s2 = sym2; - int exact1, exact2; - - /* Exact match: - * - if matched length on symbol s1 is the length of that symbol, - * then this symbol should come first; - * - if matched length on symbol s2 is the length of that symbol, - * then this symbol should come first. - * Note: since the search can be a regexp, both symbols may match - * exactly; if this is the case, we can't decide which comes first, - * and we fallback to sorting alphabetically. - */ - exact1 = (s1->eo - s1->so) == strlen(s1->sym->name); - exact2 = (s2->eo - s2->so) == strlen(s2->sym->name); - if (exact1 && !exact2) - return -1; - if (!exact1 && exact2) - return 1; - - /* As a fallback, sort symbols alphabetically */ - return strcmp(s1->sym->name, s2->sym->name); -} - -struct symbol **sym_re_search(const char *pattern) -{ - struct symbol *sym, **sym_arr = NULL; - struct sym_match *sym_match_arr = NULL; - int i, cnt, size; - regex_t re; - regmatch_t match[1]; - - cnt = size = 0; - /* Skip if empty */ - if (strlen(pattern) == 0) - return NULL; - if (regcomp(&re, pattern, REG_EXTENDED|REG_ICASE)) - return NULL; - - for_all_symbols(i, sym) { - if (sym->flags & SYMBOL_CONST || !sym->name) - continue; - if (regexec(&re, sym->name, 1, match, 0)) - continue; - if (cnt >= size) { - void *tmp; - size += 16; - tmp = realloc(sym_match_arr, size * sizeof(struct sym_match)); - if (!tmp) - goto sym_re_search_free; - sym_match_arr = tmp; - } - sym_calc_value(sym); - /* As regexec returned 0, we know we have a match, so - * we can use match[0].rm_[se]o without further checks - */ - sym_match_arr[cnt].so = match[0].rm_so; - sym_match_arr[cnt].eo = match[0].rm_eo; - sym_match_arr[cnt++].sym = sym; - } - if (sym_match_arr) { - qsort(sym_match_arr, cnt, sizeof(struct sym_match), sym_rel_comp); - sym_arr = malloc((cnt+1) * sizeof(struct symbol)); - if (!sym_arr) - goto sym_re_search_free; - for (i = 0; i < cnt; i++) - sym_arr[i] = sym_match_arr[i].sym; - sym_arr[cnt] = NULL; - } -sym_re_search_free: - /* sym_match_arr can be NULL if no match, but free(NULL) is OK */ - free(sym_match_arr); - regfree(&re); - - return sym_arr; -} - -/* - * When we check for recursive dependencies we use a stack to save - * current state so we can print out relevant info to user. - * The entries are located on the call stack so no need to free memory. - * Note insert() remove() must always match to properly clear the stack. - */ -static struct dep_stack { - struct dep_stack *prev, *next; - struct symbol *sym; - struct property *prop; - struct expr *expr; -} *check_top; - -static void dep_stack_insert(struct dep_stack *stack, struct symbol *sym) -{ - memset(stack, 0, sizeof(*stack)); - if (check_top) - check_top->next = stack; - stack->prev = check_top; - stack->sym = sym; - check_top = stack; -} - -static void dep_stack_remove(void) -{ - check_top = check_top->prev; - if (check_top) - check_top->next = NULL; -} - -/* - * Called when we have detected a recursive dependency. - * check_top point to the top of the stact so we use - * the ->prev pointer to locate the bottom of the stack. - */ -static void sym_check_print_recursive(struct symbol *last_sym) -{ - struct dep_stack *stack; - struct symbol *sym, *next_sym; - struct menu *menu = NULL; - struct property *prop; - struct dep_stack cv_stack; - - if (sym_is_choice_value(last_sym)) { - dep_stack_insert(&cv_stack, last_sym); - last_sym = prop_get_symbol(sym_get_choice_prop(last_sym)); - } - - for (stack = check_top; stack != NULL; stack = stack->prev) - if (stack->sym == last_sym) - break; - if (!stack) { - fprintf(stderr, "unexpected recursive dependency error\n"); - return; - } - - for (; stack; stack = stack->next) { - sym = stack->sym; - next_sym = stack->next ? stack->next->sym : last_sym; - prop = stack->prop; - if (prop == NULL) - prop = stack->sym->prop; - - /* for choice values find the menu entry (used below) */ - if (sym_is_choice(sym) || sym_is_choice_value(sym)) { - for (prop = sym->prop; prop; prop = prop->next) { - menu = prop->menu; - if (prop->menu) - break; - } - } - if (stack->sym == last_sym) - fprintf(stderr, "%s:%d:error: recursive dependency detected!\n", - prop->file->name, prop->lineno); - if (stack->expr) { - fprintf(stderr, "%s:%d:\tsymbol %s %s value contains %s\n", - prop->file->name, prop->lineno, - sym->name ? sym->name : "<choice>", - prop_get_type_name(prop->type), - next_sym->name ? next_sym->name : "<choice>"); - } else if (stack->prop) { - fprintf(stderr, "%s:%d:\tsymbol %s depends on %s\n", - prop->file->name, prop->lineno, - sym->name ? sym->name : "<choice>", - next_sym->name ? next_sym->name : "<choice>"); - } else if (sym_is_choice(sym)) { - fprintf(stderr, "%s:%d:\tchoice %s contains symbol %s\n", - menu->file->name, menu->lineno, - sym->name ? sym->name : "<choice>", - next_sym->name ? next_sym->name : "<choice>"); - } else if (sym_is_choice_value(sym)) { - fprintf(stderr, "%s:%d:\tsymbol %s is part of choice %s\n", - menu->file->name, menu->lineno, - sym->name ? sym->name : "<choice>", - next_sym->name ? next_sym->name : "<choice>"); - } else { - fprintf(stderr, "%s:%d:\tsymbol %s is selected by %s\n", - prop->file->name, prop->lineno, - sym->name ? sym->name : "<choice>", - next_sym->name ? next_sym->name : "<choice>"); - } - } - - if (check_top == &cv_stack) - dep_stack_remove(); -} - -static struct symbol *sym_check_expr_deps(struct expr *e) -{ - struct symbol *sym; - - if (!e) - return NULL; - switch (e->type) { - case E_OR: - case E_AND: - sym = sym_check_expr_deps(e->left.expr); - if (sym) - return sym; - return sym_check_expr_deps(e->right.expr); - case E_NOT: - return sym_check_expr_deps(e->left.expr); - case E_EQUAL: - case E_UNEQUAL: - sym = sym_check_deps(e->left.sym); - if (sym) - return sym; - return sym_check_deps(e->right.sym); - case E_SYMBOL: - return sym_check_deps(e->left.sym); - default: - break; - } - printf("Oops! How to check %d?\n", e->type); - return NULL; -} - -/* return NULL when dependencies are OK */ -static struct symbol *sym_check_sym_deps(struct symbol *sym) -{ - struct symbol *sym2; - struct property *prop; - struct dep_stack stack; - - dep_stack_insert(&stack, sym); - - sym2 = sym_check_expr_deps(sym->rev_dep.expr); - if (sym2) - goto out; - - for (prop = sym->prop; prop; prop = prop->next) { - if (prop->type == P_CHOICE || prop->type == P_SELECT) - continue; - stack.prop = prop; - sym2 = sym_check_expr_deps(prop->visible.expr); - if (sym2) - break; - if (prop->type != P_DEFAULT || sym_is_choice(sym)) - continue; - stack.expr = prop->expr; - sym2 = sym_check_expr_deps(prop->expr); - if (sym2) - break; - stack.expr = NULL; - } - -out: - dep_stack_remove(); - - return sym2; -} - -static struct symbol *sym_check_choice_deps(struct symbol *choice) -{ - struct symbol *sym, *sym2; - struct property *prop; - struct expr *e; - struct dep_stack stack; - - dep_stack_insert(&stack, choice); - - prop = sym_get_choice_prop(choice); - expr_list_for_each_sym(prop->expr, e, sym) - sym->flags |= (SYMBOL_CHECK | SYMBOL_CHECKED); - - choice->flags |= (SYMBOL_CHECK | SYMBOL_CHECKED); - sym2 = sym_check_sym_deps(choice); - choice->flags &= ~SYMBOL_CHECK; - if (sym2) - goto out; - - expr_list_for_each_sym(prop->expr, e, sym) { - sym2 = sym_check_sym_deps(sym); - if (sym2) - break; - } -out: - expr_list_for_each_sym(prop->expr, e, sym) - sym->flags &= ~SYMBOL_CHECK; - - if (sym2 && sym_is_choice_value(sym2) && - prop_get_symbol(sym_get_choice_prop(sym2)) == choice) - sym2 = choice; - - dep_stack_remove(); - - return sym2; -} - -struct symbol *sym_check_deps(struct symbol *sym) -{ - struct symbol *sym2; - struct property *prop; - - if (sym->flags & SYMBOL_CHECK) { - sym_check_print_recursive(sym); - return sym; - } - if (sym->flags & SYMBOL_CHECKED) - return NULL; - - if (sym_is_choice_value(sym)) { - struct dep_stack stack; - - /* for choice groups start the check with main choice symbol */ - dep_stack_insert(&stack, sym); - prop = sym_get_choice_prop(sym); - sym2 = sym_check_deps(prop_get_symbol(prop)); - dep_stack_remove(); - } else if (sym_is_choice(sym)) { - sym2 = sym_check_choice_deps(sym); - } else { - sym->flags |= (SYMBOL_CHECK | SYMBOL_CHECKED); - sym2 = sym_check_sym_deps(sym); - sym->flags &= ~SYMBOL_CHECK; - } - - if (sym2 && sym2 == sym) - sym2 = NULL; - - return sym2; -} - -struct property *prop_alloc(enum prop_type type, struct symbol *sym) -{ - struct property *prop; - struct property **propp; - - prop = xmalloc(sizeof(*prop)); - memset(prop, 0, sizeof(*prop)); - prop->type = type; - prop->sym = sym; - prop->file = current_file; - prop->lineno = zconf_lineno(); - - /* append property to the prop list of symbol */ - if (sym) { - for (propp = &sym->prop; *propp; propp = &(*propp)->next) - ; - *propp = prop; - } - - return prop; -} - -struct symbol *prop_get_symbol(struct property *prop) -{ - if (prop->expr && (prop->expr->type == E_SYMBOL || - prop->expr->type == E_LIST)) - return prop->expr->left.sym; - return NULL; -} - -const char *prop_get_type_name(enum prop_type type) -{ - switch (type) { - case P_PROMPT: - return "prompt"; - case P_ENV: - return "env"; - case P_COMMENT: - return "comment"; - case P_MENU: - return "menu"; - case P_DEFAULT: - return "default"; - case P_CHOICE: - return "choice"; - case P_SELECT: - return "select"; - case P_RANGE: - return "range"; - case P_SYMBOL: - return "symbol"; - case P_UNKNOWN: - break; - } - return "unknown"; -} - -static void prop_add_env(const char *env) -{ - struct symbol *sym, *sym2; - struct property *prop; - char *p; - - sym = current_entry->sym; - sym->flags |= SYMBOL_AUTO; - for_all_properties(sym, prop, P_ENV) { - sym2 = prop_get_symbol(prop); - if (strcmp(sym2->name, env)) - menu_warn(current_entry, "redefining environment symbol from %s", - sym2->name); - return; - } - - prop = prop_alloc(P_ENV, sym); - prop->expr = expr_alloc_symbol(sym_lookup(env, SYMBOL_CONST)); - - sym_env_list = expr_alloc_one(E_LIST, sym_env_list); - sym_env_list->right.sym = sym; - - p = getenv(env); - if (p) - sym_add_default(sym, p); - else - menu_warn(current_entry, "environment variable %s undefined", env); -} diff --git a/payloads/external/SeaBIOS/scripts/kconfig/util.c b/payloads/external/SeaBIOS/scripts/kconfig/util.c deleted file mode 100644 index 94f9c83e..00000000 --- a/payloads/external/SeaBIOS/scripts/kconfig/util.c +++ /dev/null @@ -1,157 +0,0 @@ -/* - * Copyright (C) 2002-2005 Roman Zippel <zippel@linux-m68k.org> - * Copyright (C) 2002-2005 Sam Ravnborg <sam@ravnborg.org> - * - * Released under the terms of the GNU GPL v2.0. - */ - -#include <stdarg.h> -#include <stdlib.h> -#include <string.h> -#include "lkc.h" - -/* file already present in list? If not add it */ -struct file *file_lookup(const char *name) -{ - struct file *file; - const char *file_name = sym_expand_string_value(name); - - for (file = file_list; file; file = file->next) { - if (!strcmp(name, file->name)) { - free((void *)file_name); - return file; - } - } - - file = xmalloc(sizeof(*file)); - memset(file, 0, sizeof(*file)); - file->name = file_name; - file->next = file_list; - file_list = file; - return file; -} - -/* write a dependency file as used by kbuild to track dependencies */ -int file_write_dep(const char *name) -{ - struct symbol *sym, *env_sym; - struct expr *e; - struct file *file; - FILE *out; - - if (!name) - name = ".kconfig.d"; - out = fopen("..config.tmp", "w"); - if (!out) - return 1; - fprintf(out, "deps_config := \\\n"); - for (file = file_list; file; file = file->next) { - if (file->next) - fprintf(out, "\t%s \\\n", file->name); - else - fprintf(out, "\t%s\n", file->name); - } - fprintf(out, "\n%s: \\\n" - "\t$(deps_config)\n\n", conf_get_autoconfig_name()); - - expr_list_for_each_sym(sym_env_list, e, sym) { - struct property *prop; - const char *value; - - prop = sym_get_env_prop(sym); - env_sym = prop_get_symbol(prop); - if (!env_sym) - continue; - value = getenv(env_sym->name); - if (!value) - value = ""; - fprintf(out, "ifneq \"$(%s)\" \"%s\"\n", env_sym->name, value); - fprintf(out, "%s: FORCE\n", conf_get_autoconfig_name()); - fprintf(out, "endif\n"); - } - - fprintf(out, "\n$(deps_config): ;\n"); - fclose(out); - rename("..config.tmp", name); - return 0; -} - - -/* Allocate initial growable string */ -struct gstr str_new(void) -{ - struct gstr gs; - gs.s = xmalloc(sizeof(char) * 64); - gs.len = 64; - gs.max_width = 0; - strcpy(gs.s, "\0"); - return gs; -} - -/* Allocate and assign growable string */ -struct gstr str_assign(const char *s) -{ - struct gstr gs; - gs.s = strdup(s); - gs.len = strlen(s) + 1; - gs.max_width = 0; - return gs; -} - -/* Free storage for growable string */ -void str_free(struct gstr *gs) -{ - if (gs->s) - free(gs->s); - gs->s = NULL; - gs->len = 0; -} - -/* Append to growable string */ -void str_append(struct gstr *gs, const char *s) -{ - size_t l; - if (s) { - l = strlen(gs->s) + strlen(s) + 1; - if (l > gs->len) { - gs->s = realloc(gs->s, l); - gs->len = l; - } - strcat(gs->s, s); - } -} - -/* Append printf formatted string to growable string */ -void str_printf(struct gstr *gs, const char *fmt, ...) -{ - va_list ap; - char s[10000]; /* big enough... */ - va_start(ap, fmt); - vsnprintf(s, sizeof(s), fmt, ap); - str_append(gs, s); - va_end(ap); -} - -/* Retrieve value of growable string */ -const char *str_get(struct gstr *gs) -{ - return gs->s; -} - -void *xmalloc(size_t size) -{ - void *p = malloc(size); - if (p) - return p; - fprintf(stderr, "Out of memory.\n"); - exit(1); -} - -void *xcalloc(size_t nmemb, size_t size) -{ - void *p = calloc(nmemb, size); - if (p) - return p; - fprintf(stderr, "Out of memory.\n"); - exit(1); -} diff --git a/payloads/external/SeaBIOS/scripts/kconfig/zconf.gperf b/payloads/external/SeaBIOS/scripts/kconfig/zconf.gperf deleted file mode 100644 index b6ac02d6..00000000 --- a/payloads/external/SeaBIOS/scripts/kconfig/zconf.gperf +++ /dev/null @@ -1,48 +0,0 @@ -%language=ANSI-C -%define hash-function-name kconf_id_hash -%define lookup-function-name kconf_id_lookup -%define string-pool-name kconf_id_strings -%compare-strncmp -%enum -%pic -%struct-type - -struct kconf_id; - -static const struct kconf_id *kconf_id_lookup(register const char *str, register unsigned int len); - -%% -mainmenu, T_MAINMENU, TF_COMMAND -menu, T_MENU, TF_COMMAND -endmenu, T_ENDMENU, TF_COMMAND -source, T_SOURCE, TF_COMMAND -choice, T_CHOICE, TF_COMMAND -endchoice, T_ENDCHOICE, TF_COMMAND -comment, T_COMMENT, TF_COMMAND -config, T_CONFIG, TF_COMMAND -menuconfig, T_MENUCONFIG, TF_COMMAND -help, T_HELP, TF_COMMAND -if, T_IF, TF_COMMAND|TF_PARAM -endif, T_ENDIF, TF_COMMAND -depends, T_DEPENDS, TF_COMMAND -optional, T_OPTIONAL, TF_COMMAND -default, T_DEFAULT, TF_COMMAND, S_UNKNOWN -prompt, T_PROMPT, TF_COMMAND -tristate, T_TYPE, TF_COMMAND, S_TRISTATE -def_tristate, T_DEFAULT, TF_COMMAND, S_TRISTATE -bool, T_TYPE, TF_COMMAND, S_BOOLEAN -boolean, T_TYPE, TF_COMMAND, S_BOOLEAN -def_bool, T_DEFAULT, TF_COMMAND, S_BOOLEAN -int, T_TYPE, TF_COMMAND, S_INT -hex, T_TYPE, TF_COMMAND, S_HEX -string, T_TYPE, TF_COMMAND, S_STRING -select, T_SELECT, TF_COMMAND -range, T_RANGE, TF_COMMAND -visible, T_VISIBLE, TF_COMMAND -option, T_OPTION, TF_COMMAND -on, T_ON, TF_PARAM -modules, T_OPT_MODULES, TF_OPTION -defconfig_list, T_OPT_DEFCONFIG_LIST,TF_OPTION -env, T_OPT_ENV, TF_OPTION -allnoconfig_y, T_OPT_ALLNOCONFIG_Y,TF_OPTION -%% diff --git a/payloads/external/SeaBIOS/scripts/kconfig/zconf.hash.c_shipped b/payloads/external/SeaBIOS/scripts/kconfig/zconf.hash.c_shipped deleted file mode 100644 index c77a8eff..00000000 --- a/payloads/external/SeaBIOS/scripts/kconfig/zconf.hash.c_shipped +++ /dev/null @@ -1,289 +0,0 @@ -/* ANSI-C code produced by gperf version 3.0.4 */ -/* Command-line: gperf -t --output-file scripts/kconfig/zconf.hash.c_shipped -a -C -E -g -k '1,3,$' -p -t scripts/kconfig/zconf.gperf */ - -#if !((' ' == 32) && ('!' == 33) && ('"' == 34) && ('#' == 35) \ - && ('%' == 37) && ('&' == 38) && ('\'' == 39) && ('(' == 40) \ - && (')' == 41) && ('*' == 42) && ('+' == 43) && (',' == 44) \ - && ('-' == 45) && ('.' == 46) && ('/' == 47) && ('0' == 48) \ - && ('1' == 49) && ('2' == 50) && ('3' == 51) && ('4' == 52) \ - && ('5' == 53) && ('6' == 54) && ('7' == 55) && ('8' == 56) \ - && ('9' == 57) && (':' == 58) && (';' == 59) && ('<' == 60) \ - && ('=' == 61) && ('>' == 62) && ('?' == 63) && ('A' == 65) \ - && ('B' == 66) && ('C' == 67) && ('D' == 68) && ('E' == 69) \ - && ('F' == 70) && ('G' == 71) && ('H' == 72) && ('I' == 73) \ - && ('J' == 74) && ('K' == 75) && ('L' == 76) && ('M' == 77) \ - && ('N' == 78) && ('O' == 79) && ('P' == 80) && ('Q' == 81) \ - && ('R' == 82) && ('S' == 83) && ('T' == 84) && ('U' == 85) \ - && ('V' == 86) && ('W' == 87) && ('X' == 88) && ('Y' == 89) \ - && ('Z' == 90) && ('[' == 91) && ('\\' == 92) && (']' == 93) \ - && ('^' == 94) && ('_' == 95) && ('a' == 97) && ('b' == 98) \ - && ('c' == 99) && ('d' == 100) && ('e' == 101) && ('f' == 102) \ - && ('g' == 103) && ('h' == 104) && ('i' == 105) && ('j' == 106) \ - && ('k' == 107) && ('l' == 108) && ('m' == 109) && ('n' == 110) \ - && ('o' == 111) && ('p' == 112) && ('q' == 113) && ('r' == 114) \ - && ('s' == 115) && ('t' == 116) && ('u' == 117) && ('v' == 118) \ - && ('w' == 119) && ('x' == 120) && ('y' == 121) && ('z' == 122) \ - && ('{' == 123) && ('|' == 124) && ('}' == 125) && ('~' == 126)) -/* The character set is not based on ISO-646. */ -#error "gperf generated tables don't work with this execution character set. Please report a bug to <bug-gnu-gperf@gnu.org>." -#endif - -#line 10 "scripts/kconfig/zconf.gperf" -struct kconf_id; - -static const struct kconf_id *kconf_id_lookup(register const char *str, register unsigned int len); -/* maximum key range = 71, duplicates = 0 */ - -#ifdef __GNUC__ -__inline -#else -#ifdef __cplusplus -inline -#endif -#endif -static unsigned int -kconf_id_hash (register const char *str, register unsigned int len) -{ - static const unsigned char asso_values[] = - { - 73, 73, 73, 73, 73, 73, 73, 73, 73, 73, - 73, 73, 73, 73, 73, 73, 73, 73, 73, 73, - 73, 73, 73, 73, 73, 73, 73, 73, 73, 73, - 73, 73, 73, 73, 73, 73, 73, 73, 73, 73, - 73, 73, 73, 73, 73, 73, 73, 73, 73, 73, - 73, 73, 73, 73, 73, 73, 73, 73, 73, 73, - 73, 73, 73, 73, 73, 73, 73, 73, 73, 73, - 73, 73, 73, 73, 73, 73, 73, 73, 73, 73, - 73, 73, 73, 73, 73, 73, 73, 73, 73, 73, - 73, 73, 73, 73, 73, 73, 73, 5, 25, 25, - 0, 0, 0, 5, 0, 0, 73, 73, 5, 0, - 10, 5, 45, 73, 20, 20, 0, 15, 15, 73, - 20, 5, 73, 73, 73, 73, 73, 73, 73, 73, - 73, 73, 73, 73, 73, 73, 73, 73, 73, 73, - 73, 73, 73, 73, 73, 73, 73, 73, 73, 73, - 73, 73, 73, 73, 73, 73, 73, 73, 73, 73, - 73, 73, 73, 73, 73, 73, 73, 73, 73, 73, - 73, 73, 73, 73, 73, 73, 73, 73, 73, 73, - 73, 73, 73, 73, 73, 73, 73, 73, 73, 73, - 73, 73, 73, 73, 73, 73, 73, 73, 73, 73, - 73, 73, 73, 73, 73, 73, 73, 73, 73, 73, - 73, 73, 73, 73, 73, 73, 73, 73, 73, 73, - 73, 73, 73, 73, 73, 73, 73, 73, 73, 73, - 73, 73, 73, 73, 73, 73, 73, 73, 73, 73, - 73, 73, 73, 73, 73, 73, 73, 73, 73, 73, - 73, 73, 73, 73, 73, 73 - }; - register int hval = len; - - switch (hval) - { - default: - hval += asso_values[(unsigned char)str[2]]; - /*FALLTHROUGH*/ - case 2: - case 1: - hval += asso_values[(unsigned char)str[0]]; - break; - } - return hval + asso_values[(unsigned char)str[len - 1]]; -} - -struct kconf_id_strings_t - { - char kconf_id_strings_str2[sizeof("if")]; - char kconf_id_strings_str3[sizeof("int")]; - char kconf_id_strings_str5[sizeof("endif")]; - char kconf_id_strings_str7[sizeof("default")]; - char kconf_id_strings_str8[sizeof("tristate")]; - char kconf_id_strings_str9[sizeof("endchoice")]; - char kconf_id_strings_str12[sizeof("def_tristate")]; - char kconf_id_strings_str13[sizeof("def_bool")]; - char kconf_id_strings_str14[sizeof("defconfig_list")]; - char kconf_id_strings_str17[sizeof("on")]; - char kconf_id_strings_str18[sizeof("optional")]; - char kconf_id_strings_str21[sizeof("option")]; - char kconf_id_strings_str22[sizeof("endmenu")]; - char kconf_id_strings_str23[sizeof("mainmenu")]; - char kconf_id_strings_str25[sizeof("menuconfig")]; - char kconf_id_strings_str27[sizeof("modules")]; - char kconf_id_strings_str28[sizeof("allnoconfig_y")]; - char kconf_id_strings_str29[sizeof("menu")]; - char kconf_id_strings_str31[sizeof("select")]; - char kconf_id_strings_str32[sizeof("comment")]; - char kconf_id_strings_str33[sizeof("env")]; - char kconf_id_strings_str35[sizeof("range")]; - char kconf_id_strings_str36[sizeof("choice")]; - char kconf_id_strings_str39[sizeof("bool")]; - char kconf_id_strings_str41[sizeof("source")]; - char kconf_id_strings_str42[sizeof("visible")]; - char kconf_id_strings_str43[sizeof("hex")]; - char kconf_id_strings_str46[sizeof("config")]; - char kconf_id_strings_str47[sizeof("boolean")]; - char kconf_id_strings_str51[sizeof("string")]; - char kconf_id_strings_str54[sizeof("help")]; - char kconf_id_strings_str56[sizeof("prompt")]; - char kconf_id_strings_str72[sizeof("depends")]; - }; -static const struct kconf_id_strings_t kconf_id_strings_contents = - { - "if", - "int", - "endif", - "default", - "tristate", - "endchoice", - "def_tristate", - "def_bool", - "defconfig_list", - "on", - "optional", - "option", - "endmenu", - "mainmenu", - "menuconfig", - "modules", - "allnoconfig_y", - "menu", - "select", - "comment", - "env", - "range", - "choice", - "bool", - "source", - "visible", - "hex", - "config", - "boolean", - "string", - "help", - "prompt", - "depends" - }; -#define kconf_id_strings ((const char *) &kconf_id_strings_contents) -#ifdef __GNUC__ -__inline -#if defined __GNUC_STDC_INLINE__ || defined __GNUC_GNU_INLINE__ -__attribute__ ((__gnu_inline__)) -#endif -#endif -const struct kconf_id * -kconf_id_lookup (register const char *str, register unsigned int len) -{ - enum - { - TOTAL_KEYWORDS = 33, - MIN_WORD_LENGTH = 2, - MAX_WORD_LENGTH = 14, - MIN_HASH_VALUE = 2, - MAX_HASH_VALUE = 72 - }; - - static const struct kconf_id wordlist[] = - { - {-1}, {-1}, -#line 25 "scripts/kconfig/zconf.gperf" - {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str2, T_IF, TF_COMMAND|TF_PARAM}, -#line 36 "scripts/kconfig/zconf.gperf" - {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str3, T_TYPE, TF_COMMAND, S_INT}, - {-1}, -#line 26 "scripts/kconfig/zconf.gperf" - {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str5, T_ENDIF, TF_COMMAND}, - {-1}, -#line 29 "scripts/kconfig/zconf.gperf" - {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str7, T_DEFAULT, TF_COMMAND, S_UNKNOWN}, -#line 31 "scripts/kconfig/zconf.gperf" - {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str8, T_TYPE, TF_COMMAND, S_TRISTATE}, -#line 20 "scripts/kconfig/zconf.gperf" - {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str9, T_ENDCHOICE, TF_COMMAND}, - {-1}, {-1}, -#line 32 "scripts/kconfig/zconf.gperf" - {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str12, T_DEFAULT, TF_COMMAND, S_TRISTATE}, -#line 35 "scripts/kconfig/zconf.gperf" - {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str13, T_DEFAULT, TF_COMMAND, S_BOOLEAN}, -#line 45 "scripts/kconfig/zconf.gperf" - {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str14, T_OPT_DEFCONFIG_LIST,TF_OPTION}, - {-1}, {-1}, -#line 43 "scripts/kconfig/zconf.gperf" - {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str17, T_ON, TF_PARAM}, -#line 28 "scripts/kconfig/zconf.gperf" - {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str18, T_OPTIONAL, TF_COMMAND}, - {-1}, {-1}, -#line 42 "scripts/kconfig/zconf.gperf" - {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str21, T_OPTION, TF_COMMAND}, -#line 17 "scripts/kconfig/zconf.gperf" - {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str22, T_ENDMENU, TF_COMMAND}, -#line 15 "scripts/kconfig/zconf.gperf" - {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str23, T_MAINMENU, TF_COMMAND}, - {-1}, -#line 23 "scripts/kconfig/zconf.gperf" - {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str25, T_MENUCONFIG, TF_COMMAND}, - {-1}, -#line 44 "scripts/kconfig/zconf.gperf" - {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str27, T_OPT_MODULES, TF_OPTION}, -#line 47 "scripts/kconfig/zconf.gperf" - {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str28, T_OPT_ALLNOCONFIG_Y,TF_OPTION}, -#line 16 "scripts/kconfig/zconf.gperf" - {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str29, T_MENU, TF_COMMAND}, - {-1}, -#line 39 "scripts/kconfig/zconf.gperf" - {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str31, T_SELECT, TF_COMMAND}, -#line 21 "scripts/kconfig/zconf.gperf" - {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str32, T_COMMENT, TF_COMMAND}, -#line 46 "scripts/kconfig/zconf.gperf" - {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str33, T_OPT_ENV, TF_OPTION}, - {-1}, -#line 40 "scripts/kconfig/zconf.gperf" - {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str35, T_RANGE, TF_COMMAND}, -#line 19 "scripts/kconfig/zconf.gperf" - {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str36, T_CHOICE, TF_COMMAND}, - {-1}, {-1}, -#line 33 "scripts/kconfig/zconf.gperf" - {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str39, T_TYPE, TF_COMMAND, S_BOOLEAN}, - {-1}, -#line 18 "scripts/kconfig/zconf.gperf" - {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str41, T_SOURCE, TF_COMMAND}, -#line 41 "scripts/kconfig/zconf.gperf" - {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str42, T_VISIBLE, TF_COMMAND}, -#line 37 "scripts/kconfig/zconf.gperf" - {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str43, T_TYPE, TF_COMMAND, S_HEX}, - {-1}, {-1}, -#line 22 "scripts/kconfig/zconf.gperf" - {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str46, T_CONFIG, TF_COMMAND}, -#line 34 "scripts/kconfig/zconf.gperf" - {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str47, T_TYPE, TF_COMMAND, S_BOOLEAN}, - {-1}, {-1}, {-1}, -#line 38 "scripts/kconfig/zconf.gperf" - {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str51, T_TYPE, TF_COMMAND, S_STRING}, - {-1}, {-1}, -#line 24 "scripts/kconfig/zconf.gperf" - {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str54, T_HELP, TF_COMMAND}, - {-1}, -#line 30 "scripts/kconfig/zconf.gperf" - {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str56, T_PROMPT, TF_COMMAND}, - {-1}, {-1}, {-1}, {-1}, {-1}, {-1}, {-1}, {-1}, {-1}, - {-1}, {-1}, {-1}, {-1}, {-1}, {-1}, -#line 27 "scripts/kconfig/zconf.gperf" - {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str72, T_DEPENDS, TF_COMMAND} - }; - - if (len <= MAX_WORD_LENGTH && len >= MIN_WORD_LENGTH) - { - register int key = kconf_id_hash (str, len); - - if (key <= MAX_HASH_VALUE && key >= 0) - { - register int o = wordlist[key].name; - if (o >= 0) - { - register const char *s = o + kconf_id_strings; - - if (*str == *s && !strncmp (str + 1, s + 1, len - 1) && s[len] == '\0') - return &wordlist[key]; - } - } - } - return 0; -} -#line 48 "scripts/kconfig/zconf.gperf" - diff --git a/payloads/external/SeaBIOS/scripts/kconfig/zconf.l b/payloads/external/SeaBIOS/scripts/kconfig/zconf.l deleted file mode 100644 index 6c62d93b..00000000 --- a/payloads/external/SeaBIOS/scripts/kconfig/zconf.l +++ /dev/null @@ -1,363 +0,0 @@ -%option nostdinit noyywrap never-interactive full ecs -%option 8bit nodefault perf-report perf-report -%option noinput -%x COMMAND HELP STRING PARAM -%{ -/* - * Copyright (C) 2002 Roman Zippel <zippel@linux-m68k.org> - * Released under the terms of the GNU GPL v2.0. - */ - -#include <limits.h> -#include <stdio.h> -#include <stdlib.h> -#include <string.h> -#include <unistd.h> - -#include "lkc.h" - -#define START_STRSIZE 16 - -static struct { - struct file *file; - int lineno; -} current_pos; - -static char *text; -static int text_size, text_asize; - -struct buffer { - struct buffer *parent; - YY_BUFFER_STATE state; -}; - -struct buffer *current_buf; - -static int last_ts, first_ts; - -static void zconf_endhelp(void); -static void zconf_endfile(void); - -static void new_string(void) -{ - text = xmalloc(START_STRSIZE); - text_asize = START_STRSIZE; - text_size = 0; - *text = 0; -} - -static void append_string(const char *str, int size) -{ - int new_size = text_size + size + 1; - if (new_size > text_asize) { - new_size += START_STRSIZE - 1; - new_size &= -START_STRSIZE; - text = realloc(text, new_size); - text_asize = new_size; - } - memcpy(text + text_size, str, size); - text_size += size; - text[text_size] = 0; -} - -static void alloc_string(const char *str, int size) -{ - text = xmalloc(size + 1); - memcpy(text, str, size); - text[size] = 0; -} -%} - -n [A-Za-z0-9_] - -%% - int str = 0; - int ts, i; - -[ \t]*#.*\n | -[ \t]*\n { - current_file->lineno++; - return T_EOL; -} -[ \t]*#.* - - -[ \t]+ { - BEGIN(COMMAND); -} - -. { - unput(yytext[0]); - BEGIN(COMMAND); -} - - -<COMMAND>{ - {n}+ { - const struct kconf_id *id = kconf_id_lookup(yytext, yyleng); - BEGIN(PARAM); - current_pos.file = current_file; - current_pos.lineno = current_file->lineno; - if (id && id->flags & TF_COMMAND) { - zconflval.id = id; - return id->token; - } - alloc_string(yytext, yyleng); - zconflval.string = text; - return T_WORD; - } - . - \n { - BEGIN(INITIAL); - current_file->lineno++; - return T_EOL; - } -} - -<PARAM>{ - "&&" return T_AND; - "||" return T_OR; - "(" return T_OPEN_PAREN; - ")" return T_CLOSE_PAREN; - "!" return T_NOT; - "=" return T_EQUAL; - "!=" return T_UNEQUAL; - \"|\' { - str = yytext[0]; - new_string(); - BEGIN(STRING); - } - \n BEGIN(INITIAL); current_file->lineno++; return T_EOL; - --- /* ignore */ - ({n}|[-/.])+ { - const struct kconf_id *id = kconf_id_lookup(yytext, yyleng); - if (id && id->flags & TF_PARAM) { - zconflval.id = id; - return id->token; - } - alloc_string(yytext, yyleng); - zconflval.string = text; - return T_WORD; - } - #.* /* comment */ - \\\n current_file->lineno++; - . - <<EOF>> { - BEGIN(INITIAL); - } -} - -<STRING>{ - [^'"\\\n]+/\n { - append_string(yytext, yyleng); - zconflval.string = text; - return T_WORD_QUOTE; - } - [^'"\\\n]+ { - append_string(yytext, yyleng); - } - \\.?/\n { - append_string(yytext + 1, yyleng - 1); - zconflval.string = text; - return T_WORD_QUOTE; - } - \\.? { - append_string(yytext + 1, yyleng - 1); - } - \'|\" { - if (str == yytext[0]) { - BEGIN(PARAM); - zconflval.string = text; - return T_WORD_QUOTE; - } else - append_string(yytext, 1); - } - \n { - printf("%s:%d:warning: multi-line strings not supported\n", zconf_curname(), zconf_lineno()); - current_file->lineno++; - BEGIN(INITIAL); - return T_EOL; - } - <<EOF>> { - BEGIN(INITIAL); - } -} - -<HELP>{ - [ \t]+ { - ts = 0; - for (i = 0; i < yyleng; i++) { - if (yytext[i] == '\t') - ts = (ts & ~7) + 8; - else - ts++; - } - last_ts = ts; - if (first_ts) { - if (ts < first_ts) { - zconf_endhelp(); - return T_HELPTEXT; - } - ts -= first_ts; - while (ts > 8) { - append_string(" ", 8); - ts -= 8; - } - append_string(" ", ts); - } - } - [ \t]*\n/[^ \t\n] { - current_file->lineno++; - zconf_endhelp(); - return T_HELPTEXT; - } - [ \t]*\n { - current_file->lineno++; - append_string("\n", 1); - } - [^ \t\n].* { - while (yyleng) { - if ((yytext[yyleng-1] != ' ') && (yytext[yyleng-1] != '\t')) - break; - yyleng--; - } - append_string(yytext, yyleng); - if (!first_ts) - first_ts = last_ts; - } - <<EOF>> { - zconf_endhelp(); - return T_HELPTEXT; - } -} - -<<EOF>> { - if (current_file) { - zconf_endfile(); - return T_EOL; - } - fclose(yyin); - yyterminate(); -} - -%% -void zconf_starthelp(void) -{ - new_string(); - last_ts = first_ts = 0; - BEGIN(HELP); -} - -static void zconf_endhelp(void) -{ - zconflval.string = text; - BEGIN(INITIAL); -} - - -/* - * Try to open specified file with following names: - * ./name - * $(srctree)/name - * The latter is used when srctree is separate from objtree - * when compiling the kernel. - * Return NULL if file is not found. - */ -FILE *zconf_fopen(const char *name) -{ - char *env, fullname[PATH_MAX+1]; - FILE *f; - - f = fopen(name, "r"); - if (!f && name != NULL && name[0] != '/') { - env = getenv(SRCTREE); - if (env) { - sprintf(fullname, "%s/%s", env, name); - f = fopen(fullname, "r"); - } - } - return f; -} - -void zconf_initscan(const char *name) -{ - yyin = zconf_fopen(name); - if (!yyin) { - printf("can't find file %s\n", name); - exit(1); - } - - current_buf = xmalloc(sizeof(*current_buf)); - memset(current_buf, 0, sizeof(*current_buf)); - - current_file = file_lookup(name); - current_file->lineno = 1; -} - -void zconf_nextfile(const char *name) -{ - struct file *iter; - struct file *file = file_lookup(name); - struct buffer *buf = xmalloc(sizeof(*buf)); - memset(buf, 0, sizeof(*buf)); - - current_buf->state = YY_CURRENT_BUFFER; - yyin = zconf_fopen(file->name); - if (!yyin) { - printf("%s:%d: can't open file \"%s\"\n", - zconf_curname(), zconf_lineno(), file->name); - exit(1); - } - yy_switch_to_buffer(yy_create_buffer(yyin, YY_BUF_SIZE)); - buf->parent = current_buf; - current_buf = buf; - - for (iter = current_file->parent; iter; iter = iter->parent ) { - if (!strcmp(current_file->name,iter->name) ) { - printf("%s:%d: recursive inclusion detected. " - "Inclusion path:\n current file : '%s'\n", - zconf_curname(), zconf_lineno(), - zconf_curname()); - iter = current_file->parent; - while (iter && \ - strcmp(iter->name,current_file->name)) { - printf(" included from: '%s:%d'\n", - iter->name, iter->lineno-1); - iter = iter->parent; - } - if (iter) - printf(" included from: '%s:%d'\n", - iter->name, iter->lineno+1); - exit(1); - } - } - file->lineno = 1; - file->parent = current_file; - current_file = file; -} - -static void zconf_endfile(void) -{ - struct buffer *parent; - - current_file = current_file->parent; - - parent = current_buf->parent; - if (parent) { - fclose(yyin); - yy_delete_buffer(YY_CURRENT_BUFFER); - yy_switch_to_buffer(parent->state); - } - free(current_buf); - current_buf = parent; -} - -int zconf_lineno(void) -{ - return current_pos.lineno; -} - -const char *zconf_curname(void) -{ - return current_pos.file ? current_pos.file->name : "<none>"; -} diff --git a/payloads/external/SeaBIOS/scripts/kconfig/zconf.lex.c_shipped b/payloads/external/SeaBIOS/scripts/kconfig/zconf.lex.c_shipped deleted file mode 100644 index 349a7f24..00000000 --- a/payloads/external/SeaBIOS/scripts/kconfig/zconf.lex.c_shipped +++ /dev/null @@ -1,2420 +0,0 @@ - -#line 3 "scripts/kconfig/zconf.lex.c_shipped" - -#define YY_INT_ALIGNED short int - -/* A lexical scanner generated by flex */ - -#define yy_create_buffer zconf_create_buffer -#define yy_delete_buffer zconf_delete_buffer -#define yy_flex_debug zconf_flex_debug -#define yy_init_buffer zconf_init_buffer -#define yy_flush_buffer zconf_flush_buffer -#define yy_load_buffer_state zconf_load_buffer_state -#define yy_switch_to_buffer zconf_switch_to_buffer -#define yyin zconfin -#define yyleng zconfleng -#define yylex zconflex -#define yylineno zconflineno -#define yyout zconfout -#define yyrestart zconfrestart -#define yytext zconftext -#define yywrap zconfwrap -#define yyalloc zconfalloc -#define yyrealloc zconfrealloc -#define yyfree zconffree - -#define FLEX_SCANNER -#define YY_FLEX_MAJOR_VERSION 2 -#define YY_FLEX_MINOR_VERSION 5 -#define YY_FLEX_SUBMINOR_VERSION 35 -#if YY_FLEX_SUBMINOR_VERSION > 0 -#define FLEX_BETA -#endif - -/* First, we deal with platform-specific or compiler-specific issues. */ - -/* begin standard C headers. */ -#include <stdio.h> -#include <string.h> -#include <errno.h> -#include <stdlib.h> - -/* end standard C headers. */ - -/* flex integer type definitions */ - -#ifndef FLEXINT_H -#define FLEXINT_H - -/* C99 systems have <inttypes.h>. Non-C99 systems may or may not. */ - -#if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L - -/* C99 says to define __STDC_LIMIT_MACROS before including stdint.h, - * if you want the limit (max/min) macros for int types. - */ -#ifndef __STDC_LIMIT_MACROS -#define __STDC_LIMIT_MACROS 1 -#endif - -#include <inttypes.h> -typedef int8_t flex_int8_t; -typedef uint8_t flex_uint8_t; -typedef int16_t flex_int16_t; -typedef uint16_t flex_uint16_t; -typedef int32_t flex_int32_t; -typedef uint32_t flex_uint32_t; -#else -typedef signed char flex_int8_t; -typedef short int flex_int16_t; -typedef int flex_int32_t; -typedef unsigned char flex_uint8_t; -typedef unsigned short int flex_uint16_t; -typedef unsigned int flex_uint32_t; -#endif /* ! C99 */ - -/* Limits of integral types. */ -#ifndef INT8_MIN -#define INT8_MIN (-128) -#endif -#ifndef INT16_MIN -#define INT16_MIN (-32767-1) -#endif -#ifndef INT32_MIN -#define INT32_MIN (-2147483647-1) -#endif -#ifndef INT8_MAX -#define INT8_MAX (127) -#endif -#ifndef INT16_MAX -#define INT16_MAX (32767) -#endif -#ifndef INT32_MAX -#define INT32_MAX (2147483647) -#endif -#ifndef UINT8_MAX -#define UINT8_MAX (255U) -#endif -#ifndef UINT16_MAX -#define UINT16_MAX (65535U) -#endif -#ifndef UINT32_MAX -#define UINT32_MAX (4294967295U) -#endif - -#endif /* ! FLEXINT_H */ - -#ifdef __cplusplus - -/* The "const" storage-class-modifier is valid. */ -#define YY_USE_CONST - -#else /* ! __cplusplus */ - -/* C99 requires __STDC__ to be defined as 1. */ -#if defined (__STDC__) - -#define YY_USE_CONST - -#endif /* defined (__STDC__) */ -#endif /* ! __cplusplus */ - -#ifdef YY_USE_CONST -#define yyconst const -#else -#define yyconst -#endif - -/* Returned upon end-of-file. */ -#define YY_NULL 0 - -/* Promotes a possibly negative, possibly signed char to an unsigned - * integer for use as an array index. If the signed char is negative, - * we want to instead treat it as an 8-bit unsigned char, hence the - * double cast. - */ -#define YY_SC_TO_UI(c) ((unsigned int) (unsigned char) c) - -/* Enter a start condition. This macro really ought to take a parameter, - * but we do it the disgusting crufty way forced on us by the ()-less - * definition of BEGIN. - */ -#define BEGIN (yy_start) = 1 + 2 * - -/* Translate the current start state into a value that can be later handed - * to BEGIN to return to the state. The YYSTATE alias is for lex - * compatibility. - */ -#define YY_START (((yy_start) - 1) / 2) -#define YYSTATE YY_START - -/* Action number for EOF rule of a given start state. */ -#define YY_STATE_EOF(state) (YY_END_OF_BUFFER + state + 1) - -/* Special action meaning "start processing a new file". */ -#define YY_NEW_FILE zconfrestart(zconfin ) - -#define YY_END_OF_BUFFER_CHAR 0 - -/* Size of default input buffer. */ -#ifndef YY_BUF_SIZE -#define YY_BUF_SIZE 16384 -#endif - -/* The state buf must be large enough to hold one state per character in the main buffer. - */ -#define YY_STATE_BUF_SIZE ((YY_BUF_SIZE + 2) * sizeof(yy_state_type)) - -#ifndef YY_TYPEDEF_YY_BUFFER_STATE -#define YY_TYPEDEF_YY_BUFFER_STATE -typedef struct yy_buffer_state *YY_BUFFER_STATE; -#endif - -extern int zconfleng; - -extern FILE *zconfin, *zconfout; - -#define EOB_ACT_CONTINUE_SCAN 0 -#define EOB_ACT_END_OF_FILE 1 -#define EOB_ACT_LAST_MATCH 2 - - #define YY_LESS_LINENO(n) - -/* Return all but the first "n" matched characters back to the input stream. */ -#define yyless(n) \ - do \ - { \ - /* Undo effects of setting up zconftext. */ \ - int yyless_macro_arg = (n); \ - YY_LESS_LINENO(yyless_macro_arg);\ - *yy_cp = (yy_hold_char); \ - YY_RESTORE_YY_MORE_OFFSET \ - (yy_c_buf_p) = yy_cp = yy_bp + yyless_macro_arg - YY_MORE_ADJ; \ - YY_DO_BEFORE_ACTION; /* set up zconftext again */ \ - } \ - while ( 0 ) - -#define unput(c) yyunput( c, (yytext_ptr) ) - -#ifndef YY_TYPEDEF_YY_SIZE_T -#define YY_TYPEDEF_YY_SIZE_T -typedef size_t yy_size_t; -#endif - -#ifndef YY_STRUCT_YY_BUFFER_STATE -#define YY_STRUCT_YY_BUFFER_STATE -struct yy_buffer_state - { - FILE *yy_input_file; - - char *yy_ch_buf; /* input buffer */ - char *yy_buf_pos; /* current position in input buffer */ - - /* Size of input buffer in bytes, not including room for EOB - * characters. - */ - yy_size_t yy_buf_size; - - /* Number of characters read into yy_ch_buf, not including EOB - * characters. - */ - int yy_n_chars; - - /* Whether we "own" the buffer - i.e., we know we created it, - * and can realloc() it to grow it, and should free() it to - * delete it. - */ - int yy_is_our_buffer; - - /* Whether this is an "interactive" input source; if so, and - * if we're using stdio for input, then we want to use getc() - * instead of fread(), to make sure we stop fetching input after - * each newline. - */ - int yy_is_interactive; - - /* Whether we're considered to be at the beginning of a line. - * If so, '^' rules will be active on the next match, otherwise - * not. - */ - int yy_at_bol; - - int yy_bs_lineno; /**< The line count. */ - int yy_bs_column; /**< The column count. */ - - /* Whether to try to fill the input buffer when we reach the - * end of it. - */ - int yy_fill_buffer; - - int yy_buffer_status; - -#define YY_BUFFER_NEW 0 -#define YY_BUFFER_NORMAL 1 - /* When an EOF's been seen but there's still some text to process - * then we mark the buffer as YY_EOF_PENDING, to indicate that we - * shouldn't try reading from the input source any more. We might - * still have a bunch of tokens to match, though, because of - * possible backing-up. - * - * When we actually see the EOF, we change the status to "new" - * (via zconfrestart()), so that the user can continue scanning by - * just pointing zconfin at a new input file. - */ -#define YY_BUFFER_EOF_PENDING 2 - - }; -#endif /* !YY_STRUCT_YY_BUFFER_STATE */ - -/* Stack of input buffers. */ -static size_t yy_buffer_stack_top = 0; /**< index of top of stack. */ -static size_t yy_buffer_stack_max = 0; /**< capacity of stack. */ -static YY_BUFFER_STATE * yy_buffer_stack = 0; /**< Stack as an array. */ - -/* We provide macros for accessing buffer states in case in the - * future we want to put the buffer states in a more general - * "scanner state". - * - * Returns the top of the stack, or NULL. - */ -#define YY_CURRENT_BUFFER ( (yy_buffer_stack) \ - ? (yy_buffer_stack)[(yy_buffer_stack_top)] \ - : NULL) - -/* Same as previous macro, but useful when we know that the buffer stack is not - * NULL or when we need an lvalue. For internal use only. - */ -#define YY_CURRENT_BUFFER_LVALUE (yy_buffer_stack)[(yy_buffer_stack_top)] - -/* yy_hold_char holds the character lost when zconftext is formed. */ -static char yy_hold_char; -static int yy_n_chars; /* number of characters read into yy_ch_buf */ -int zconfleng; - -/* Points to current character in buffer. */ -static char *yy_c_buf_p = (char *) 0; -static int yy_init = 0; /* whether we need to initialize */ -static int yy_start = 0; /* start state number */ - -/* Flag which is used to allow zconfwrap()'s to do buffer switches - * instead of setting up a fresh zconfin. A bit of a hack ... - */ -static int yy_did_buffer_switch_on_eof; - -void zconfrestart (FILE *input_file ); -void zconf_switch_to_buffer (YY_BUFFER_STATE new_buffer ); -YY_BUFFER_STATE zconf_create_buffer (FILE *file,int size ); -void zconf_delete_buffer (YY_BUFFER_STATE b ); -void zconf_flush_buffer (YY_BUFFER_STATE b ); -void zconfpush_buffer_state (YY_BUFFER_STATE new_buffer ); -void zconfpop_buffer_state (void ); - -static void zconfensure_buffer_stack (void ); -static void zconf_load_buffer_state (void ); -static void zconf_init_buffer (YY_BUFFER_STATE b,FILE *file ); - -#define YY_FLUSH_BUFFER zconf_flush_buffer(YY_CURRENT_BUFFER ) - -YY_BUFFER_STATE zconf_scan_buffer (char *base,yy_size_t size ); -YY_BUFFER_STATE zconf_scan_string (yyconst char *yy_str ); -YY_BUFFER_STATE zconf_scan_bytes (yyconst char *bytes,int len ); - -void *zconfalloc (yy_size_t ); -void *zconfrealloc (void *,yy_size_t ); -void zconffree (void * ); - -#define yy_new_buffer zconf_create_buffer - -#define yy_set_interactive(is_interactive) \ - { \ - if ( ! YY_CURRENT_BUFFER ){ \ - zconfensure_buffer_stack (); \ - YY_CURRENT_BUFFER_LVALUE = \ - zconf_create_buffer(zconfin,YY_BUF_SIZE ); \ - } \ - YY_CURRENT_BUFFER_LVALUE->yy_is_interactive = is_interactive; \ - } - -#define yy_set_bol(at_bol) \ - { \ - if ( ! YY_CURRENT_BUFFER ){\ - zconfensure_buffer_stack (); \ - YY_CURRENT_BUFFER_LVALUE = \ - zconf_create_buffer(zconfin,YY_BUF_SIZE ); \ - } \ - YY_CURRENT_BUFFER_LVALUE->yy_at_bol = at_bol; \ - } - -#define YY_AT_BOL() (YY_CURRENT_BUFFER_LVALUE->yy_at_bol) - -/* Begin user sect3 */ - -#define zconfwrap(n) 1 -#define YY_SKIP_YYWRAP - -typedef unsigned char YY_CHAR; - -FILE *zconfin = (FILE *) 0, *zconfout = (FILE *) 0; - -typedef int yy_state_type; - -extern int zconflineno; - -int zconflineno = 1; - -extern char *zconftext; -#define yytext_ptr zconftext -static yyconst flex_int16_t yy_nxt[][17] = - { - { - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0 - }, - - { - 11, 12, 13, 14, 12, 12, 15, 12, 12, 12, - 12, 12, 12, 12, 12, 12, 12 - }, - - { - 11, 12, 13, 14, 12, 12, 15, 12, 12, 12, - 12, 12, 12, 12, 12, 12, 12 - }, - - { - 11, 16, 16, 17, 16, 16, 16, 16, 16, 16, - 16, 16, 16, 18, 16, 16, 16 - }, - - { - 11, 16, 16, 17, 16, 16, 16, 16, 16, 16, - 16, 16, 16, 18, 16, 16, 16 - - }, - - { - 11, 19, 20, 21, 19, 19, 19, 19, 19, 19, - 19, 19, 19, 19, 19, 19, 19 - }, - - { - 11, 19, 20, 21, 19, 19, 19, 19, 19, 19, - 19, 19, 19, 19, 19, 19, 19 - }, - - { - 11, 22, 22, 23, 22, 24, 22, 22, 24, 22, - 22, 22, 22, 22, 22, 25, 22 - }, - - { - 11, 22, 22, 23, 22, 24, 22, 22, 24, 22, - 22, 22, 22, 22, 22, 25, 22 - }, - - { - 11, 26, 26, 27, 28, 29, 30, 31, 29, 32, - 33, 34, 35, 35, 36, 37, 38 - - }, - - { - 11, 26, 26, 27, 28, 29, 30, 31, 29, 32, - 33, 34, 35, 35, 36, 37, 38 - }, - - { - -11, -11, -11, -11, -11, -11, -11, -11, -11, -11, - -11, -11, -11, -11, -11, -11, -11 - }, - - { - 11, -12, -12, -12, -12, -12, -12, -12, -12, -12, - -12, -12, -12, -12, -12, -12, -12 - }, - - { - 11, -13, 39, 40, -13, -13, 41, -13, -13, -13, - -13, -13, -13, -13, -13, -13, -13 - }, - - { - 11, -14, -14, -14, -14, -14, -14, -14, -14, -14, - -14, -14, -14, -14, -14, -14, -14 - - }, - - { - 11, 42, 42, 43, 42, 42, 42, 42, 42, 42, - 42, 42, 42, 42, 42, 42, 42 - }, - - { - 11, -16, -16, -16, -16, -16, -16, -16, -16, -16, - -16, -16, -16, -16, -16, -16, -16 - }, - - { - 11, -17, -17, -17, -17, -17, -17, -17, -17, -17, - -17, -17, -17, -17, -17, -17, -17 - }, - - { - 11, -18, -18, -18, -18, -18, -18, -18, -18, -18, - -18, -18, -18, 44, -18, -18, -18 - }, - - { - 11, 45, 45, -19, 45, 45, 45, 45, 45, 45, - 45, 45, 45, 45, 45, 45, 45 - - }, - - { - 11, -20, 46, 47, -20, -20, -20, -20, -20, -20, - -20, -20, -20, -20, -20, -20, -20 - }, - - { - 11, 48, -21, -21, 48, 48, 48, 48, 48, 48, - 48, 48, 48, 48, 48, 48, 48 - }, - - { - 11, 49, 49, 50, 49, -22, 49, 49, -22, 49, - 49, 49, 49, 49, 49, -22, 49 - }, - - { - 11, -23, -23, -23, -23, -23, -23, -23, -23, -23, - -23, -23, -23, -23, -23, -23, -23 - }, - - { - 11, -24, -24, -24, -24, -24, -24, -24, -24, -24, - -24, -24, -24, -24, -24, -24, -24 - - }, - - { - 11, 51, 51, 52, 51, 51, 51, 51, 51, 51, - 51, 51, 51, 51, 51, 51, 51 - }, - - { - 11, -26, -26, -26, -26, -26, -26, -26, -26, -26, - -26, -26, -26, -26, -26, -26, -26 - }, - - { - 11, -27, -27, -27, -27, -27, -27, -27, -27, -27, - -27, -27, -27, -27, -27, -27, -27 - }, - - { - 11, -28, -28, -28, -28, -28, -28, -28, -28, -28, - -28, -28, -28, -28, 53, -28, -28 - }, - - { - 11, -29, -29, -29, -29, -29, -29, -29, -29, -29, - -29, -29, -29, -29, -29, -29, -29 - - }, - - { - 11, 54, 54, -30, 54, 54, 54, 54, 54, 54, - 54, 54, 54, 54, 54, 54, 54 - }, - - { - 11, -31, -31, -31, -31, -31, -31, 55, -31, -31, - -31, -31, -31, -31, -31, -31, -31 - }, - - { - 11, -32, -32, -32, -32, -32, -32, -32, -32, -32, - -32, -32, -32, -32, -32, -32, -32 - }, - - { - 11, -33, -33, -33, -33, -33, -33, -33, -33, -33, - -33, -33, -33, -33, -33, -33, -33 - }, - - { - 11, -34, -34, -34, -34, -34, -34, -34, -34, -34, - -34, 56, 57, 57, -34, -34, -34 - - }, - - { - 11, -35, -35, -35, -35, -35, -35, -35, -35, -35, - -35, 57, 57, 57, -35, -35, -35 - }, - - { - 11, -36, -36, -36, -36, -36, -36, -36, -36, -36, - -36, -36, -36, -36, -36, -36, -36 - }, - - { - 11, -37, -37, 58, -37, -37, -37, -37, -37, -37, - -37, -37, -37, -37, -37, -37, -37 - }, - - { - 11, -38, -38, -38, -38, -38, -38, -38, -38, -38, - -38, -38, -38, -38, -38, -38, 59 - }, - - { - 11, -39, 39, 40, -39, -39, 41, -39, -39, -39, - -39, -39, -39, -39, -39, -39, -39 - - }, - - { - 11, -40, -40, -40, -40, -40, -40, -40, -40, -40, - -40, -40, -40, -40, -40, -40, -40 - }, - - { - 11, 42, 42, 43, 42, 42, 42, 42, 42, 42, - 42, 42, 42, 42, 42, 42, 42 - }, - - { - 11, 42, 42, 43, 42, 42, 42, 42, 42, 42, - 42, 42, 42, 42, 42, 42, 42 - }, - - { - 11, -43, -43, -43, -43, -43, -43, -43, -43, -43, - -43, -43, -43, -43, -43, -43, -43 - }, - - { - 11, -44, -44, -44, -44, -44, -44, -44, -44, -44, - -44, -44, -44, 44, -44, -44, -44 - - }, - - { - 11, 45, 45, -45, 45, 45, 45, 45, 45, 45, - 45, 45, 45, 45, 45, 45, 45 - }, - - { - 11, -46, 46, 47, -46, -46, -46, -46, -46, -46, - -46, -46, -46, -46, -46, -46, -46 - }, - - { - 11, 48, -47, -47, 48, 48, 48, 48, 48, 48, - 48, 48, 48, 48, 48, 48, 48 - }, - - { - 11, -48, -48, -48, -48, -48, -48, -48, -48, -48, - -48, -48, -48, -48, -48, -48, -48 - }, - - { - 11, 49, 49, 50, 49, -49, 49, 49, -49, 49, - 49, 49, 49, 49, 49, -49, 49 - - }, - - { - 11, -50, -50, -50, -50, -50, -50, -50, -50, -50, - -50, -50, -50, -50, -50, -50, -50 - }, - - { - 11, -51, -51, 52, -51, -51, -51, -51, -51, -51, - -51, -51, -51, -51, -51, -51, -51 - }, - - { - 11, -52, -52, -52, -52, -52, -52, -52, -52, -52, - -52, -52, -52, -52, -52, -52, -52 - }, - - { - 11, -53, -53, -53, -53, -53, -53, -53, -53, -53, - -53, -53, -53, -53, -53, -53, -53 - }, - - { - 11, 54, 54, -54, 54, 54, 54, 54, 54, 54, - 54, 54, 54, 54, 54, 54, 54 - - }, - - { - 11, -55, -55, -55, -55, -55, -55, -55, -55, -55, - -55, -55, -55, -55, -55, -55, -55 - }, - - { - 11, -56, -56, -56, -56, -56, -56, -56, -56, -56, - -56, 60, 57, 57, -56, -56, -56 - }, - - { - 11, -57, -57, -57, -57, -57, -57, -57, -57, -57, - -57, 57, 57, 57, -57, -57, -57 - }, - - { - 11, -58, -58, -58, -58, -58, -58, -58, -58, -58, - -58, -58, -58, -58, -58, -58, -58 - }, - - { - 11, -59, -59, -59, -59, -59, -59, -59, -59, -59, - -59, -59, -59, -59, -59, -59, -59 - - }, - - { - 11, -60, -60, -60, -60, -60, -60, -60, -60, -60, - -60, 57, 57, 57, -60, -60, -60 - }, - - } ; - -static yy_state_type yy_get_previous_state (void ); -static yy_state_type yy_try_NUL_trans (yy_state_type current_state ); -static int yy_get_next_buffer (void ); -static void yy_fatal_error (yyconst char msg[] ); - -/* Done after the current pattern has been matched and before the - * corresponding action - sets up zconftext. - */ -#define YY_DO_BEFORE_ACTION \ - (yytext_ptr) = yy_bp; \ - zconfleng = (size_t) (yy_cp - yy_bp); \ - (yy_hold_char) = *yy_cp; \ - *yy_cp = '\0'; \ - (yy_c_buf_p) = yy_cp; - -#define YY_NUM_RULES 33 -#define YY_END_OF_BUFFER 34 -/* This struct is not used in this scanner, - but its presence is necessary. */ -struct yy_trans_info - { - flex_int32_t yy_verify; - flex_int32_t yy_nxt; - }; -static yyconst flex_int16_t yy_accept[61] = - { 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 34, 5, 4, 2, 3, 7, 8, 6, 32, 29, - 31, 24, 28, 27, 26, 22, 17, 13, 16, 20, - 22, 11, 12, 19, 19, 14, 22, 22, 4, 2, - 3, 3, 1, 6, 32, 29, 31, 30, 24, 23, - 26, 25, 15, 20, 9, 19, 19, 21, 10, 18 - } ; - -static yyconst flex_int32_t yy_ec[256] = - { 0, - 1, 1, 1, 1, 1, 1, 1, 1, 2, 3, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 2, 4, 5, 6, 1, 1, 7, 8, 9, - 10, 1, 1, 1, 11, 12, 12, 13, 13, 13, - 13, 13, 13, 13, 13, 13, 13, 1, 1, 1, - 14, 1, 1, 1, 13, 13, 13, 13, 13, 13, - 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, - 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, - 1, 15, 1, 1, 13, 1, 13, 13, 13, 13, - - 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, - 13, 13, 13, 13, 13, 13, 13, 13, 13, 13, - 13, 13, 1, 16, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1 - } ; - -extern int zconf_flex_debug; -int zconf_flex_debug = 0; - -/* The intent behind this definition is that it'll catch - * any uses of REJECT which flex missed. - */ -#define REJECT reject_used_but_not_detected -#define yymore() yymore_used_but_not_detected -#define YY_MORE_ADJ 0 -#define YY_RESTORE_YY_MORE_OFFSET -char *zconftext; -#define YY_NO_INPUT 1 - -/* - * Copyright (C) 2002 Roman Zippel <zippel@linux-m68k.org> - * Released under the terms of the GNU GPL v2.0. - */ - -#include <limits.h> -#include <stdio.h> -#include <stdlib.h> -#include <string.h> -#include <unistd.h> - -#include "lkc.h" - -#define START_STRSIZE 16 - -static struct { - struct file *file; - int lineno; -} current_pos; - -static char *text; -static int text_size, text_asize; - -struct buffer { - struct buffer *parent; - YY_BUFFER_STATE state; -}; - -struct buffer *current_buf; - -static int last_ts, first_ts; - -static void zconf_endhelp(void); -static void zconf_endfile(void); - -static void new_string(void) -{ - text = xmalloc(START_STRSIZE); - text_asize = START_STRSIZE; - text_size = 0; - *text = 0; -} - -static void append_string(const char *str, int size) -{ - int new_size = text_size + size + 1; - if (new_size > text_asize) { - new_size += START_STRSIZE - 1; - new_size &= -START_STRSIZE; - text = realloc(text, new_size); - text_asize = new_size; - } - memcpy(text + text_size, str, size); - text_size += size; - text[text_size] = 0; -} - -static void alloc_string(const char *str, int size) -{ - text = xmalloc(size + 1); - memcpy(text, str, size); - text[size] = 0; -} - -#define INITIAL 0 -#define COMMAND 1 -#define HELP 2 -#define STRING 3 -#define PARAM 4 - -#ifndef YY_NO_UNISTD_H -/* Special case for "unistd.h", since it is non-ANSI. We include it way - * down here because we want the user's section 1 to have been scanned first. - * The user has a chance to override it with an option. - */ -#include <unistd.h> -#endif - -#ifndef YY_EXTRA_TYPE -#define YY_EXTRA_TYPE void * -#endif - -static int yy_init_globals (void ); - -/* Accessor methods to globals. - These are made visible to non-reentrant scanners for convenience. */ - -int zconflex_destroy (void ); - -int zconfget_debug (void ); - -void zconfset_debug (int debug_flag ); - -YY_EXTRA_TYPE zconfget_extra (void ); - -void zconfset_extra (YY_EXTRA_TYPE user_defined ); - -FILE *zconfget_in (void ); - -void zconfset_in (FILE * in_str ); - -FILE *zconfget_out (void ); - -void zconfset_out (FILE * out_str ); - -int zconfget_leng (void ); - -char *zconfget_text (void ); - -int zconfget_lineno (void ); - -void zconfset_lineno (int line_number ); - -/* Macros after this point can all be overridden by user definitions in - * section 1. - */ - -#ifndef YY_SKIP_YYWRAP -#ifdef __cplusplus -extern "C" int zconfwrap (void ); -#else -extern int zconfwrap (void ); -#endif -#endif - - static void yyunput (int c,char *buf_ptr ); - -#ifndef yytext_ptr -static void yy_flex_strncpy (char *,yyconst char *,int ); -#endif - -#ifdef YY_NEED_STRLEN -static int yy_flex_strlen (yyconst char * ); -#endif - -#ifndef YY_NO_INPUT - -#ifdef __cplusplus -static int yyinput (void ); -#else -static int input (void ); -#endif - -#endif - -/* Amount of stuff to slurp up with each read. */ -#ifndef YY_READ_BUF_SIZE -#define YY_READ_BUF_SIZE 8192 -#endif - -/* Copy whatever the last rule matched to the standard output. */ -#ifndef ECHO -/* This used to be an fputs(), but since the string might contain NUL's, - * we now use fwrite(). - */ -#define ECHO do { if (fwrite( zconftext, zconfleng, 1, zconfout )) {} } while (0) -#endif - -/* Gets input and stuffs it into "buf". number of characters read, or YY_NULL, - * is returned in "result". - */ -#ifndef YY_INPUT -#define YY_INPUT(buf,result,max_size) \ - errno=0; \ - while ( (result = read( fileno(zconfin), (char *) buf, max_size )) < 0 ) \ - { \ - if( errno != EINTR) \ - { \ - YY_FATAL_ERROR( "input in flex scanner failed" ); \ - break; \ - } \ - errno=0; \ - clearerr(zconfin); \ - }\ -\ - -#endif - -/* No semi-colon after return; correct usage is to write "yyterminate();" - - * we don't want an extra ';' after the "return" because that will cause - * some compilers to complain about unreachable statements. - */ -#ifndef yyterminate -#define yyterminate() return YY_NULL -#endif - -/* Number of entries by which start-condition stack grows. */ -#ifndef YY_START_STACK_INCR -#define YY_START_STACK_INCR 25 -#endif - -/* Report a fatal error. */ -#ifndef YY_FATAL_ERROR -#define YY_FATAL_ERROR(msg) yy_fatal_error( msg ) -#endif - -/* end tables serialization structures and prototypes */ - -/* Default declaration of generated scanner - a define so the user can - * easily add parameters. - */ -#ifndef YY_DECL -#define YY_DECL_IS_OURS 1 - -extern int zconflex (void); - -#define YY_DECL int zconflex (void) -#endif /* !YY_DECL */ - -/* Code executed at the beginning of each rule, after zconftext and zconfleng - * have been set up. - */ -#ifndef YY_USER_ACTION -#define YY_USER_ACTION -#endif - -/* Code executed at the end of each rule. */ -#ifndef YY_BREAK -#define YY_BREAK break; -#endif - -#define YY_RULE_SETUP \ - YY_USER_ACTION - -/** The main scanner function which does all the work. - */ -YY_DECL -{ - register yy_state_type yy_current_state; - register char *yy_cp, *yy_bp; - register int yy_act; - - int str = 0; - int ts, i; - - if ( !(yy_init) ) - { - (yy_init) = 1; - -#ifdef YY_USER_INIT - YY_USER_INIT; -#endif - - if ( ! (yy_start) ) - (yy_start) = 1; /* first start state */ - - if ( ! zconfin ) - zconfin = stdin; - - if ( ! zconfout ) - zconfout = stdout; - - if ( ! YY_CURRENT_BUFFER ) { - zconfensure_buffer_stack (); - YY_CURRENT_BUFFER_LVALUE = - zconf_create_buffer(zconfin,YY_BUF_SIZE ); - } - - zconf_load_buffer_state( ); - } - - while ( 1 ) /* loops until end-of-file is reached */ - { - yy_cp = (yy_c_buf_p); - - /* Support of zconftext. */ - *yy_cp = (yy_hold_char); - - /* yy_bp points to the position in yy_ch_buf of the start of - * the current run. - */ - yy_bp = yy_cp; - - yy_current_state = (yy_start); -yy_match: - while ( (yy_current_state = yy_nxt[yy_current_state][ yy_ec[YY_SC_TO_UI(*yy_cp)] ]) > 0 ) - ++yy_cp; - - yy_current_state = -yy_current_state; - -yy_find_action: - yy_act = yy_accept[yy_current_state]; - - YY_DO_BEFORE_ACTION; - -do_action: /* This label is used only to access EOF actions. */ - - switch ( yy_act ) - { /* beginning of action switch */ -case 1: -/* rule 1 can match eol */ -case 2: -/* rule 2 can match eol */ -YY_RULE_SETUP -{ - current_file->lineno++; - return T_EOL; -} - YY_BREAK -case 3: -YY_RULE_SETUP - - YY_BREAK -case 4: -YY_RULE_SETUP -{ - BEGIN(COMMAND); -} - YY_BREAK -case 5: -YY_RULE_SETUP -{ - unput(zconftext[0]); - BEGIN(COMMAND); -} - YY_BREAK - -case 6: -YY_RULE_SETUP -{ - const struct kconf_id *id = kconf_id_lookup(zconftext, zconfleng); - BEGIN(PARAM); - current_pos.file = current_file; - current_pos.lineno = current_file->lineno; - if (id && id->flags & TF_COMMAND) { - zconflval.id = id; - return id->token; - } - alloc_string(zconftext, zconfleng); - zconflval.string = text; - return T_WORD; - } - YY_BREAK -case 7: -YY_RULE_SETUP - - YY_BREAK -case 8: -/* rule 8 can match eol */ -YY_RULE_SETUP -{ - BEGIN(INITIAL); - current_file->lineno++; - return T_EOL; - } - YY_BREAK - -case 9: -YY_RULE_SETUP -return T_AND; - YY_BREAK -case 10: -YY_RULE_SETUP -return T_OR; - YY_BREAK -case 11: -YY_RULE_SETUP -return T_OPEN_PAREN; - YY_BREAK -case 12: -YY_RULE_SETUP -return T_CLOSE_PAREN; - YY_BREAK -case 13: -YY_RULE_SETUP -return T_NOT; - YY_BREAK -case 14: -YY_RULE_SETUP -return T_EQUAL; - YY_BREAK -case 15: -YY_RULE_SETUP -return T_UNEQUAL; - YY_BREAK -case 16: -YY_RULE_SETUP -{ - str = zconftext[0]; - new_string(); - BEGIN(STRING); - } - YY_BREAK -case 17: -/* rule 17 can match eol */ -YY_RULE_SETUP -BEGIN(INITIAL); current_file->lineno++; return T_EOL; - YY_BREAK -case 18: -YY_RULE_SETUP -/* ignore */ - YY_BREAK -case 19: -YY_RULE_SETUP -{ - const struct kconf_id *id = kconf_id_lookup(zconftext, zconfleng); - if (id && id->flags & TF_PARAM) { - zconflval.id = id; - return id->token; - } - alloc_string(zconftext, zconfleng); - zconflval.string = text; - return T_WORD; - } - YY_BREAK -case 20: -YY_RULE_SETUP -/* comment */ - YY_BREAK -case 21: -/* rule 21 can match eol */ -YY_RULE_SETUP -current_file->lineno++; - YY_BREAK -case 22: -YY_RULE_SETUP - - YY_BREAK -case YY_STATE_EOF(PARAM): -{ - BEGIN(INITIAL); - } - YY_BREAK - -case 23: -/* rule 23 can match eol */ -*yy_cp = (yy_hold_char); /* undo effects of setting up zconftext */ -(yy_c_buf_p) = yy_cp -= 1; -YY_DO_BEFORE_ACTION; /* set up zconftext again */ -YY_RULE_SETUP -{ - append_string(zconftext, zconfleng); - zconflval.string = text; - return T_WORD_QUOTE; - } - YY_BREAK -case 24: -YY_RULE_SETUP -{ - append_string(zconftext, zconfleng); - } - YY_BREAK -case 25: -/* rule 25 can match eol */ -*yy_cp = (yy_hold_char); /* undo effects of setting up zconftext */ -(yy_c_buf_p) = yy_cp -= 1; -YY_DO_BEFORE_ACTION; /* set up zconftext again */ -YY_RULE_SETUP -{ - append_string(zconftext + 1, zconfleng - 1); - zconflval.string = text; - return T_WORD_QUOTE; - } - YY_BREAK -case 26: -YY_RULE_SETUP -{ - append_string(zconftext + 1, zconfleng - 1); - } - YY_BREAK -case 27: -YY_RULE_SETUP -{ - if (str == zconftext[0]) { - BEGIN(PARAM); - zconflval.string = text; - return T_WORD_QUOTE; - } else - append_string(zconftext, 1); - } - YY_BREAK -case 28: -/* rule 28 can match eol */ -YY_RULE_SETUP -{ - printf("%s:%d:warning: multi-line strings not supported\n", zconf_curname(), zconf_lineno()); - current_file->lineno++; - BEGIN(INITIAL); - return T_EOL; - } - YY_BREAK -case YY_STATE_EOF(STRING): -{ - BEGIN(INITIAL); - } - YY_BREAK - -case 29: -YY_RULE_SETUP -{ - ts = 0; - for (i = 0; i < zconfleng; i++) { - if (zconftext[i] == '\t') - ts = (ts & ~7) + 8; - else - ts++; - } - last_ts = ts; - if (first_ts) { - if (ts < first_ts) { - zconf_endhelp(); - return T_HELPTEXT; - } - ts -= first_ts; - while (ts > 8) { - append_string(" ", 8); - ts -= 8; - } - append_string(" ", ts); - } - } - YY_BREAK -case 30: -/* rule 30 can match eol */ -*yy_cp = (yy_hold_char); /* undo effects of setting up zconftext */ -(yy_c_buf_p) = yy_cp -= 1; -YY_DO_BEFORE_ACTION; /* set up zconftext again */ -YY_RULE_SETUP -{ - current_file->lineno++; - zconf_endhelp(); - return T_HELPTEXT; - } - YY_BREAK -case 31: -/* rule 31 can match eol */ -YY_RULE_SETUP -{ - current_file->lineno++; - append_string("\n", 1); - } - YY_BREAK -case 32: -YY_RULE_SETUP -{ - while (zconfleng) { - if ((zconftext[zconfleng-1] != ' ') && (zconftext[zconfleng-1] != '\t')) - break; - zconfleng--; - } - append_string(zconftext, zconfleng); - if (!first_ts) - first_ts = last_ts; - } - YY_BREAK -case YY_STATE_EOF(HELP): -{ - zconf_endhelp(); - return T_HELPTEXT; - } - YY_BREAK - -case YY_STATE_EOF(INITIAL): -case YY_STATE_EOF(COMMAND): -{ - if (current_file) { - zconf_endfile(); - return T_EOL; - } - fclose(zconfin); - yyterminate(); -} - YY_BREAK -case 33: -YY_RULE_SETUP -YY_FATAL_ERROR( "flex scanner jammed" ); - YY_BREAK - - case YY_END_OF_BUFFER: - { - /* Amount of text matched not including the EOB char. */ - int yy_amount_of_matched_text = (int) (yy_cp - (yytext_ptr)) - 1; - - /* Undo the effects of YY_DO_BEFORE_ACTION. */ - *yy_cp = (yy_hold_char); - YY_RESTORE_YY_MORE_OFFSET - - if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_NEW ) - { - /* We're scanning a new file or input source. It's - * possible that this happened because the user - * just pointed zconfin at a new source and called - * zconflex(). If so, then we have to assure - * consistency between YY_CURRENT_BUFFER and our - * globals. Here is the right place to do so, because - * this is the first action (other than possibly a - * back-up) that will match for the new input source. - */ - (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars; - YY_CURRENT_BUFFER_LVALUE->yy_input_file = zconfin; - YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = YY_BUFFER_NORMAL; - } - - /* Note that here we test for yy_c_buf_p "<=" to the position - * of the first EOB in the buffer, since yy_c_buf_p will - * already have been incremented past the NUL character - * (since all states make transitions on EOB to the - * end-of-buffer state). Contrast this with the test - * in input(). - */ - if ( (yy_c_buf_p) <= &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] ) - { /* This was really a NUL. */ - yy_state_type yy_next_state; - - (yy_c_buf_p) = (yytext_ptr) + yy_amount_of_matched_text; - - yy_current_state = yy_get_previous_state( ); - - /* Okay, we're now positioned to make the NUL - * transition. We couldn't have - * yy_get_previous_state() go ahead and do it - * for us because it doesn't know how to deal - * with the possibility of jamming (and we don't - * want to build jamming into it because then it - * will run more slowly). - */ - - yy_next_state = yy_try_NUL_trans( yy_current_state ); - - yy_bp = (yytext_ptr) + YY_MORE_ADJ; - - if ( yy_next_state ) - { - /* Consume the NUL. */ - yy_cp = ++(yy_c_buf_p); - yy_current_state = yy_next_state; - goto yy_match; - } - - else - { - yy_cp = (yy_c_buf_p); - goto yy_find_action; - } - } - - else switch ( yy_get_next_buffer( ) ) - { - case EOB_ACT_END_OF_FILE: - { - (yy_did_buffer_switch_on_eof) = 0; - - if ( zconfwrap( ) ) - { - /* Note: because we've taken care in - * yy_get_next_buffer() to have set up - * zconftext, we can now set up - * yy_c_buf_p so that if some total - * hoser (like flex itself) wants to - * call the scanner after we return the - * YY_NULL, it'll still work - another - * YY_NULL will get returned. - */ - (yy_c_buf_p) = (yytext_ptr) + YY_MORE_ADJ; - - yy_act = YY_STATE_EOF(YY_START); - goto do_action; - } - - else - { - if ( ! (yy_did_buffer_switch_on_eof) ) - YY_NEW_FILE; - } - break; - } - - case EOB_ACT_CONTINUE_SCAN: - (yy_c_buf_p) = - (yytext_ptr) + yy_amount_of_matched_text; - - yy_current_state = yy_get_previous_state( ); - - yy_cp = (yy_c_buf_p); - yy_bp = (yytext_ptr) + YY_MORE_ADJ; - goto yy_match; - - case EOB_ACT_LAST_MATCH: - (yy_c_buf_p) = - &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)]; - - yy_current_state = yy_get_previous_state( ); - - yy_cp = (yy_c_buf_p); - yy_bp = (yytext_ptr) + YY_MORE_ADJ; - goto yy_find_action; - } - break; - } - - default: - YY_FATAL_ERROR( - "fatal flex scanner internal error--no action found" ); - } /* end of action switch */ - } /* end of scanning one token */ -} /* end of zconflex */ - -/* yy_get_next_buffer - try to read in a new buffer - * - * Returns a code representing an action: - * EOB_ACT_LAST_MATCH - - * EOB_ACT_CONTINUE_SCAN - continue scanning from current position - * EOB_ACT_END_OF_FILE - end of file - */ -static int yy_get_next_buffer (void) -{ - register char *dest = YY_CURRENT_BUFFER_LVALUE->yy_ch_buf; - register char *source = (yytext_ptr); - register int number_to_move, i; - int ret_val; - - if ( (yy_c_buf_p) > &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] ) - YY_FATAL_ERROR( - "fatal flex scanner internal error--end of buffer missed" ); - - if ( YY_CURRENT_BUFFER_LVALUE->yy_fill_buffer == 0 ) - { /* Don't try to fill the buffer, so this is an EOF. */ - if ( (yy_c_buf_p) - (yytext_ptr) - YY_MORE_ADJ == 1 ) - { - /* We matched a single character, the EOB, so - * treat this as a final EOF. - */ - return EOB_ACT_END_OF_FILE; - } - - else - { - /* We matched some text prior to the EOB, first - * process it. - */ - return EOB_ACT_LAST_MATCH; - } - } - - /* Try to read more data. */ - - /* First move last chars to start of buffer. */ - number_to_move = (int) ((yy_c_buf_p) - (yytext_ptr)) - 1; - - for ( i = 0; i < number_to_move; ++i ) - *(dest++) = *(source++); - - if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_EOF_PENDING ) - /* don't do the read, it's not guaranteed to return an EOF, - * just force an EOF - */ - YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars) = 0; - - else - { - int num_to_read = - YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1; - - while ( num_to_read <= 0 ) - { /* Not enough room in the buffer - grow it. */ - - /* just a shorter name for the current buffer */ - YY_BUFFER_STATE b = YY_CURRENT_BUFFER; - - int yy_c_buf_p_offset = - (int) ((yy_c_buf_p) - b->yy_ch_buf); - - if ( b->yy_is_our_buffer ) - { - int new_size = b->yy_buf_size * 2; - - if ( new_size <= 0 ) - b->yy_buf_size += b->yy_buf_size / 8; - else - b->yy_buf_size *= 2; - - b->yy_ch_buf = (char *) - /* Include room in for 2 EOB chars. */ - zconfrealloc((void *) b->yy_ch_buf,b->yy_buf_size + 2 ); - } - else - /* Can't grow it, we don't own it. */ - b->yy_ch_buf = 0; - - if ( ! b->yy_ch_buf ) - YY_FATAL_ERROR( - "fatal error - scanner input buffer overflow" ); - - (yy_c_buf_p) = &b->yy_ch_buf[yy_c_buf_p_offset]; - - num_to_read = YY_CURRENT_BUFFER_LVALUE->yy_buf_size - - number_to_move - 1; - - } - - if ( num_to_read > YY_READ_BUF_SIZE ) - num_to_read = YY_READ_BUF_SIZE; - - /* Read in more data. */ - YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]), - (yy_n_chars), (size_t) num_to_read ); - - YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); - } - - if ( (yy_n_chars) == 0 ) - { - if ( number_to_move == YY_MORE_ADJ ) - { - ret_val = EOB_ACT_END_OF_FILE; - zconfrestart(zconfin ); - } - - else - { - ret_val = EOB_ACT_LAST_MATCH; - YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = - YY_BUFFER_EOF_PENDING; - } - } - - else - ret_val = EOB_ACT_CONTINUE_SCAN; - - if ((yy_size_t) ((yy_n_chars) + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) { - /* Extend the array by 50%, plus the number we really need. */ - yy_size_t new_size = (yy_n_chars) + number_to_move + ((yy_n_chars) >> 1); - YY_CURRENT_BUFFER_LVALUE->yy_ch_buf = (char *) zconfrealloc((void *) YY_CURRENT_BUFFER_LVALUE->yy_ch_buf,new_size ); - if ( ! YY_CURRENT_BUFFER_LVALUE->yy_ch_buf ) - YY_FATAL_ERROR( "out of dynamic memory in yy_get_next_buffer()" ); - } - - (yy_n_chars) += number_to_move; - YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR; - YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR; - - (yytext_ptr) = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[0]; - - return ret_val; -} - -/* yy_get_previous_state - get the state just before the EOB char was reached */ - - static yy_state_type yy_get_previous_state (void) -{ - register yy_state_type yy_current_state; - register char *yy_cp; - - yy_current_state = (yy_start); - - for ( yy_cp = (yytext_ptr) + YY_MORE_ADJ; yy_cp < (yy_c_buf_p); ++yy_cp ) - { - yy_current_state = yy_nxt[yy_current_state][(*yy_cp ? yy_ec[YY_SC_TO_UI(*yy_cp)] : 1)]; - } - - return yy_current_state; -} - -/* yy_try_NUL_trans - try to make a transition on the NUL character - * - * synopsis - * next_state = yy_try_NUL_trans( current_state ); - */ - static yy_state_type yy_try_NUL_trans (yy_state_type yy_current_state ) -{ - register int yy_is_jam; - - yy_current_state = yy_nxt[yy_current_state][1]; - yy_is_jam = (yy_current_state <= 0); - - return yy_is_jam ? 0 : yy_current_state; -} - - static void yyunput (int c, register char * yy_bp ) -{ - register char *yy_cp; - - yy_cp = (yy_c_buf_p); - - /* undo effects of setting up zconftext */ - *yy_cp = (yy_hold_char); - - if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 ) - { /* need to shift things up to make room */ - /* +2 for EOB chars. */ - register int number_to_move = (yy_n_chars) + 2; - register char *dest = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[ - YY_CURRENT_BUFFER_LVALUE->yy_buf_size + 2]; - register char *source = - &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]; - - while ( source > YY_CURRENT_BUFFER_LVALUE->yy_ch_buf ) - *--dest = *--source; - - yy_cp += (int) (dest - source); - yy_bp += (int) (dest - source); - YY_CURRENT_BUFFER_LVALUE->yy_n_chars = - (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_buf_size; - - if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 ) - YY_FATAL_ERROR( "flex scanner push-back overflow" ); - } - - *--yy_cp = (char) c; - - (yytext_ptr) = yy_bp; - (yy_hold_char) = *yy_cp; - (yy_c_buf_p) = yy_cp; -} - -#ifndef YY_NO_INPUT -#ifdef __cplusplus - static int yyinput (void) -#else - static int input (void) -#endif - -{ - int c; - - *(yy_c_buf_p) = (yy_hold_char); - - if ( *(yy_c_buf_p) == YY_END_OF_BUFFER_CHAR ) - { - /* yy_c_buf_p now points to the character we want to return. - * If this occurs *before* the EOB characters, then it's a - * valid NUL; if not, then we've hit the end of the buffer. - */ - if ( (yy_c_buf_p) < &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] ) - /* This was really a NUL. */ - *(yy_c_buf_p) = '\0'; - - else - { /* need more input */ - int offset = (yy_c_buf_p) - (yytext_ptr); - ++(yy_c_buf_p); - - switch ( yy_get_next_buffer( ) ) - { - case EOB_ACT_LAST_MATCH: - /* This happens because yy_g_n_b() - * sees that we've accumulated a - * token and flags that we need to - * try matching the token before - * proceeding. But for input(), - * there's no matching to consider. - * So convert the EOB_ACT_LAST_MATCH - * to EOB_ACT_END_OF_FILE. - */ - - /* Reset buffer status. */ - zconfrestart(zconfin ); - - /*FALLTHROUGH*/ - - case EOB_ACT_END_OF_FILE: - { - if ( zconfwrap( ) ) - return EOF; - - if ( ! (yy_did_buffer_switch_on_eof) ) - YY_NEW_FILE; -#ifdef __cplusplus - return yyinput(); -#else - return input(); -#endif - } - - case EOB_ACT_CONTINUE_SCAN: - (yy_c_buf_p) = (yytext_ptr) + offset; - break; - } - } - } - - c = *(unsigned char *) (yy_c_buf_p); /* cast for 8-bit char's */ - *(yy_c_buf_p) = '\0'; /* preserve zconftext */ - (yy_hold_char) = *++(yy_c_buf_p); - - return c; -} -#endif /* ifndef YY_NO_INPUT */ - -/** Immediately switch to a different input stream. - * @param input_file A readable stream. - * - * @note This function does not reset the start condition to @c INITIAL . - */ - void zconfrestart (FILE * input_file ) -{ - - if ( ! YY_CURRENT_BUFFER ){ - zconfensure_buffer_stack (); - YY_CURRENT_BUFFER_LVALUE = - zconf_create_buffer(zconfin,YY_BUF_SIZE ); - } - - zconf_init_buffer(YY_CURRENT_BUFFER,input_file ); - zconf_load_buffer_state( ); -} - -/** Switch to a different input buffer. - * @param new_buffer The new input buffer. - * - */ - void zconf_switch_to_buffer (YY_BUFFER_STATE new_buffer ) -{ - - /* TODO. We should be able to replace this entire function body - * with - * zconfpop_buffer_state(); - * zconfpush_buffer_state(new_buffer); - */ - zconfensure_buffer_stack (); - if ( YY_CURRENT_BUFFER == new_buffer ) - return; - - if ( YY_CURRENT_BUFFER ) - { - /* Flush out information for old buffer. */ - *(yy_c_buf_p) = (yy_hold_char); - YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p); - YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); - } - - YY_CURRENT_BUFFER_LVALUE = new_buffer; - zconf_load_buffer_state( ); - - /* We don't actually know whether we did this switch during - * EOF (zconfwrap()) processing, but the only time this flag - * is looked at is after zconfwrap() is called, so it's safe - * to go ahead and always set it. - */ - (yy_did_buffer_switch_on_eof) = 1; -} - -static void zconf_load_buffer_state (void) -{ - (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars; - (yytext_ptr) = (yy_c_buf_p) = YY_CURRENT_BUFFER_LVALUE->yy_buf_pos; - zconfin = YY_CURRENT_BUFFER_LVALUE->yy_input_file; - (yy_hold_char) = *(yy_c_buf_p); -} - -/** Allocate and initialize an input buffer state. - * @param file A readable stream. - * @param size The character buffer size in bytes. When in doubt, use @c YY_BUF_SIZE. - * - * @return the allocated buffer state. - */ - YY_BUFFER_STATE zconf_create_buffer (FILE * file, int size ) -{ - YY_BUFFER_STATE b; - - b = (YY_BUFFER_STATE) zconfalloc(sizeof( struct yy_buffer_state ) ); - if ( ! b ) - YY_FATAL_ERROR( "out of dynamic memory in zconf_create_buffer()" ); - - b->yy_buf_size = size; - - /* yy_ch_buf has to be 2 characters longer than the size given because - * we need to put in 2 end-of-buffer characters. - */ - b->yy_ch_buf = (char *) zconfalloc(b->yy_buf_size + 2 ); - if ( ! b->yy_ch_buf ) - YY_FATAL_ERROR( "out of dynamic memory in zconf_create_buffer()" ); - - b->yy_is_our_buffer = 1; - - zconf_init_buffer(b,file ); - - return b; -} - -/** Destroy the buffer. - * @param b a buffer created with zconf_create_buffer() - * - */ - void zconf_delete_buffer (YY_BUFFER_STATE b ) -{ - - if ( ! b ) - return; - - if ( b == YY_CURRENT_BUFFER ) /* Not sure if we should pop here. */ - YY_CURRENT_BUFFER_LVALUE = (YY_BUFFER_STATE) 0; - - if ( b->yy_is_our_buffer ) - zconffree((void *) b->yy_ch_buf ); - - zconffree((void *) b ); -} - -/* Initializes or reinitializes a buffer. - * This function is sometimes called more than once on the same buffer, - * such as during a zconfrestart() or at EOF. - */ - static void zconf_init_buffer (YY_BUFFER_STATE b, FILE * file ) - -{ - int oerrno = errno; - - zconf_flush_buffer(b ); - - b->yy_input_file = file; - b->yy_fill_buffer = 1; - - /* If b is the current buffer, then zconf_init_buffer was _probably_ - * called from zconfrestart() or through yy_get_next_buffer. - * In that case, we don't want to reset the lineno or column. - */ - if (b != YY_CURRENT_BUFFER){ - b->yy_bs_lineno = 1; - b->yy_bs_column = 0; - } - - b->yy_is_interactive = 0; - - errno = oerrno; -} - -/** Discard all buffered characters. On the next scan, YY_INPUT will be called. - * @param b the buffer state to be flushed, usually @c YY_CURRENT_BUFFER. - * - */ - void zconf_flush_buffer (YY_BUFFER_STATE b ) -{ - if ( ! b ) - return; - - b->yy_n_chars = 0; - - /* We always need two end-of-buffer characters. The first causes - * a transition to the end-of-buffer state. The second causes - * a jam in that state. - */ - b->yy_ch_buf[0] = YY_END_OF_BUFFER_CHAR; - b->yy_ch_buf[1] = YY_END_OF_BUFFER_CHAR; - - b->yy_buf_pos = &b->yy_ch_buf[0]; - - b->yy_at_bol = 1; - b->yy_buffer_status = YY_BUFFER_NEW; - - if ( b == YY_CURRENT_BUFFER ) - zconf_load_buffer_state( ); -} - -/** Pushes the new state onto the stack. The new state becomes - * the current state. This function will allocate the stack - * if necessary. - * @param new_buffer The new state. - * - */ -void zconfpush_buffer_state (YY_BUFFER_STATE new_buffer ) -{ - if (new_buffer == NULL) - return; - - zconfensure_buffer_stack(); - - /* This block is copied from zconf_switch_to_buffer. */ - if ( YY_CURRENT_BUFFER ) - { - /* Flush out information for old buffer. */ - *(yy_c_buf_p) = (yy_hold_char); - YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p); - YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); - } - - /* Only push if top exists. Otherwise, replace top. */ - if (YY_CURRENT_BUFFER) - (yy_buffer_stack_top)++; - YY_CURRENT_BUFFER_LVALUE = new_buffer; - - /* copied from zconf_switch_to_buffer. */ - zconf_load_buffer_state( ); - (yy_did_buffer_switch_on_eof) = 1; -} - -/** Removes and deletes the top of the stack, if present. - * The next element becomes the new top. - * - */ -void zconfpop_buffer_state (void) -{ - if (!YY_CURRENT_BUFFER) - return; - - zconf_delete_buffer(YY_CURRENT_BUFFER ); - YY_CURRENT_BUFFER_LVALUE = NULL; - if ((yy_buffer_stack_top) > 0) - --(yy_buffer_stack_top); - - if (YY_CURRENT_BUFFER) { - zconf_load_buffer_state( ); - (yy_did_buffer_switch_on_eof) = 1; - } -} - -/* Allocates the stack if it does not exist. - * Guarantees space for at least one push. - */ -static void zconfensure_buffer_stack (void) -{ - int num_to_alloc; - - if (!(yy_buffer_stack)) { - - /* First allocation is just for 2 elements, since we don't know if this - * scanner will even need a stack. We use 2 instead of 1 to avoid an - * immediate realloc on the next call. - */ - num_to_alloc = 1; - (yy_buffer_stack) = (struct yy_buffer_state**)zconfalloc - (num_to_alloc * sizeof(struct yy_buffer_state*) - ); - if ( ! (yy_buffer_stack) ) - YY_FATAL_ERROR( "out of dynamic memory in zconfensure_buffer_stack()" ); - - memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*)); - - (yy_buffer_stack_max) = num_to_alloc; - (yy_buffer_stack_top) = 0; - return; - } - - if ((yy_buffer_stack_top) >= ((yy_buffer_stack_max)) - 1){ - - /* Increase the buffer to prepare for a possible push. */ - int grow_size = 8 /* arbitrary grow size */; - - num_to_alloc = (yy_buffer_stack_max) + grow_size; - (yy_buffer_stack) = (struct yy_buffer_state**)zconfrealloc - ((yy_buffer_stack), - num_to_alloc * sizeof(struct yy_buffer_state*) - ); - if ( ! (yy_buffer_stack) ) - YY_FATAL_ERROR( "out of dynamic memory in zconfensure_buffer_stack()" ); - - /* zero only the new slots.*/ - memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*)); - (yy_buffer_stack_max) = num_to_alloc; - } -} - -/** Setup the input buffer state to scan directly from a user-specified character buffer. - * @param base the character buffer - * @param size the size in bytes of the character buffer - * - * @return the newly allocated buffer state object. - */ -YY_BUFFER_STATE zconf_scan_buffer (char * base, yy_size_t size ) -{ - YY_BUFFER_STATE b; - - if ( size < 2 || - base[size-2] != YY_END_OF_BUFFER_CHAR || - base[size-1] != YY_END_OF_BUFFER_CHAR ) - /* They forgot to leave room for the EOB's. */ - return 0; - - b = (YY_BUFFER_STATE) zconfalloc(sizeof( struct yy_buffer_state ) ); - if ( ! b ) - YY_FATAL_ERROR( "out of dynamic memory in zconf_scan_buffer()" ); - - b->yy_buf_size = size - 2; /* "- 2" to take care of EOB's */ - b->yy_buf_pos = b->yy_ch_buf = base; - b->yy_is_our_buffer = 0; - b->yy_input_file = 0; - b->yy_n_chars = b->yy_buf_size; - b->yy_is_interactive = 0; - b->yy_at_bol = 1; - b->yy_fill_buffer = 0; - b->yy_buffer_status = YY_BUFFER_NEW; - - zconf_switch_to_buffer(b ); - - return b; -} - -/** Setup the input buffer state to scan a string. The next call to zconflex() will - * scan from a @e copy of @a str. - * @param yystr a NUL-terminated string to scan - * - * @return the newly allocated buffer state object. - * @note If you want to scan bytes that may contain NUL values, then use - * zconf_scan_bytes() instead. - */ -YY_BUFFER_STATE zconf_scan_string (yyconst char * yystr ) -{ - - return zconf_scan_bytes(yystr,strlen(yystr) ); -} - -/** Setup the input buffer state to scan the given bytes. The next call to zconflex() will - * scan from a @e copy of @a bytes. - * @param bytes the byte buffer to scan - * @param len the number of bytes in the buffer pointed to by @a bytes. - * - * @return the newly allocated buffer state object. - */ -YY_BUFFER_STATE zconf_scan_bytes (yyconst char * yybytes, int _yybytes_len ) -{ - YY_BUFFER_STATE b; - char *buf; - yy_size_t n; - int i; - - /* Get memory for full buffer, including space for trailing EOB's. */ - n = _yybytes_len + 2; - buf = (char *) zconfalloc(n ); - if ( ! buf ) - YY_FATAL_ERROR( "out of dynamic memory in zconf_scan_bytes()" ); - - for ( i = 0; i < _yybytes_len; ++i ) - buf[i] = yybytes[i]; - - buf[_yybytes_len] = buf[_yybytes_len+1] = YY_END_OF_BUFFER_CHAR; - - b = zconf_scan_buffer(buf,n ); - if ( ! b ) - YY_FATAL_ERROR( "bad buffer in zconf_scan_bytes()" ); - - /* It's okay to grow etc. this buffer, and we should throw it - * away when we're done. - */ - b->yy_is_our_buffer = 1; - - return b; -} - -#ifndef YY_EXIT_FAILURE -#define YY_EXIT_FAILURE 2 -#endif - -static void yy_fatal_error (yyconst char* msg ) -{ - (void) fprintf( stderr, "%s\n", msg ); - exit( YY_EXIT_FAILURE ); -} - -/* Redefine yyless() so it works in section 3 code. */ - -#undef yyless -#define yyless(n) \ - do \ - { \ - /* Undo effects of setting up zconftext. */ \ - int yyless_macro_arg = (n); \ - YY_LESS_LINENO(yyless_macro_arg);\ - zconftext[zconfleng] = (yy_hold_char); \ - (yy_c_buf_p) = zconftext + yyless_macro_arg; \ - (yy_hold_char) = *(yy_c_buf_p); \ - *(yy_c_buf_p) = '\0'; \ - zconfleng = yyless_macro_arg; \ - } \ - while ( 0 ) - -/* Accessor methods (get/set functions) to struct members. */ - -/** Get the current line number. - * - */ -int zconfget_lineno (void) -{ - - return zconflineno; -} - -/** Get the input stream. - * - */ -FILE *zconfget_in (void) -{ - return zconfin; -} - -/** Get the output stream. - * - */ -FILE *zconfget_out (void) -{ - return zconfout; -} - -/** Get the length of the current token. - * - */ -int zconfget_leng (void) -{ - return zconfleng; -} - -/** Get the current token. - * - */ - -char *zconfget_text (void) -{ - return zconftext; -} - -/** Set the current line number. - * @param line_number - * - */ -void zconfset_lineno (int line_number ) -{ - - zconflineno = line_number; -} - -/** Set the input stream. This does not discard the current - * input buffer. - * @param in_str A readable stream. - * - * @see zconf_switch_to_buffer - */ -void zconfset_in (FILE * in_str ) -{ - zconfin = in_str ; -} - -void zconfset_out (FILE * out_str ) -{ - zconfout = out_str ; -} - -int zconfget_debug (void) -{ - return zconf_flex_debug; -} - -void zconfset_debug (int bdebug ) -{ - zconf_flex_debug = bdebug ; -} - -static int yy_init_globals (void) -{ - /* Initialization is the same as for the non-reentrant scanner. - * This function is called from zconflex_destroy(), so don't allocate here. - */ - - (yy_buffer_stack) = 0; - (yy_buffer_stack_top) = 0; - (yy_buffer_stack_max) = 0; - (yy_c_buf_p) = (char *) 0; - (yy_init) = 0; - (yy_start) = 0; - -/* Defined in main.c */ -#ifdef YY_STDINIT - zconfin = stdin; - zconfout = stdout; -#else - zconfin = (FILE *) 0; - zconfout = (FILE *) 0; -#endif - - /* For future reference: Set errno on error, since we are called by - * zconflex_init() - */ - return 0; -} - -/* zconflex_destroy is for both reentrant and non-reentrant scanners. */ -int zconflex_destroy (void) -{ - - /* Pop the buffer stack, destroying each element. */ - while(YY_CURRENT_BUFFER){ - zconf_delete_buffer(YY_CURRENT_BUFFER ); - YY_CURRENT_BUFFER_LVALUE = NULL; - zconfpop_buffer_state(); - } - - /* Destroy the stack itself. */ - zconffree((yy_buffer_stack) ); - (yy_buffer_stack) = NULL; - - /* Reset the globals. This is important in a non-reentrant scanner so the next time - * zconflex() is called, initialization will occur. */ - yy_init_globals( ); - - return 0; -} - -/* - * Internal utility routines. - */ - -#ifndef yytext_ptr -static void yy_flex_strncpy (char* s1, yyconst char * s2, int n ) -{ - register int i; - for ( i = 0; i < n; ++i ) - s1[i] = s2[i]; -} -#endif - -#ifdef YY_NEED_STRLEN -static int yy_flex_strlen (yyconst char * s ) -{ - register int n; - for ( n = 0; s[n]; ++n ) - ; - - return n; -} -#endif - -void *zconfalloc (yy_size_t size ) -{ - return (void *) malloc( size ); -} - -void *zconfrealloc (void * ptr, yy_size_t size ) -{ - /* The cast to (char *) in the following accommodates both - * implementations that use char* generic pointers, and those - * that use void* generic pointers. It works with the latter - * because both ANSI C and C++ allow castless assignment from - * any pointer type to void*, and deal with argument conversions - * as though doing an assignment. - */ - return (void *) realloc( (char *) ptr, size ); -} - -void zconffree (void * ptr ) -{ - free( (char *) ptr ); /* see zconfrealloc() for (char *) cast */ -} - -#define YYTABLES_NAME "yytables" - -void zconf_starthelp(void) -{ - new_string(); - last_ts = first_ts = 0; - BEGIN(HELP); -} - -static void zconf_endhelp(void) -{ - zconflval.string = text; - BEGIN(INITIAL); -} - -/* - * Try to open specified file with following names: - * ./name - * $(srctree)/name - * The latter is used when srctree is separate from objtree - * when compiling the kernel. - * Return NULL if file is not found. - */ -FILE *zconf_fopen(const char *name) -{ - char *env, fullname[PATH_MAX+1]; - FILE *f; - - f = fopen(name, "r"); - if (!f && name != NULL && name[0] != '/') { - env = getenv(SRCTREE); - if (env) { - sprintf(fullname, "%s/%s", env, name); - f = fopen(fullname, "r"); - } - } - return f; -} - -void zconf_initscan(const char *name) -{ - zconfin = zconf_fopen(name); - if (!zconfin) { - printf("can't find file %s\n", name); - exit(1); - } - - current_buf = xmalloc(sizeof(*current_buf)); - memset(current_buf, 0, sizeof(*current_buf)); - - current_file = file_lookup(name); - current_file->lineno = 1; -} - -void zconf_nextfile(const char *name) -{ - struct file *iter; - struct file *file = file_lookup(name); - struct buffer *buf = xmalloc(sizeof(*buf)); - memset(buf, 0, sizeof(*buf)); - - current_buf->state = YY_CURRENT_BUFFER; - zconfin = zconf_fopen(file->name); - if (!zconfin) { - printf("%s:%d: can't open file \"%s\"\n", - zconf_curname(), zconf_lineno(), file->name); - exit(1); - } - zconf_switch_to_buffer(zconf_create_buffer(zconfin,YY_BUF_SIZE)); - buf->parent = current_buf; - current_buf = buf; - - for (iter = current_file->parent; iter; iter = iter->parent ) { - if (!strcmp(current_file->name,iter->name) ) { - printf("%s:%d: recursive inclusion detected. " - "Inclusion path:\n current file : '%s'\n", - zconf_curname(), zconf_lineno(), - zconf_curname()); - iter = current_file->parent; - while (iter && \ - strcmp(iter->name,current_file->name)) { - printf(" included from: '%s:%d'\n", - iter->name, iter->lineno-1); - iter = iter->parent; - } - if (iter) - printf(" included from: '%s:%d'\n", - iter->name, iter->lineno+1); - exit(1); - } - } - file->lineno = 1; - file->parent = current_file; - current_file = file; -} - -static void zconf_endfile(void) -{ - struct buffer *parent; - - current_file = current_file->parent; - - parent = current_buf->parent; - if (parent) { - fclose(zconfin); - zconf_delete_buffer(YY_CURRENT_BUFFER); - zconf_switch_to_buffer(parent->state); - } - free(current_buf); - current_buf = parent; -} - -int zconf_lineno(void) -{ - return current_pos.lineno; -} - -const char *zconf_curname(void) -{ - return current_pos.file ? current_pos.file->name : "<none>"; -} - diff --git a/payloads/external/SeaBIOS/scripts/kconfig/zconf.tab.c_shipped b/payloads/external/SeaBIOS/scripts/kconfig/zconf.tab.c_shipped deleted file mode 100644 index de5e84ed..00000000 --- a/payloads/external/SeaBIOS/scripts/kconfig/zconf.tab.c_shipped +++ /dev/null @@ -1,2538 +0,0 @@ -/* A Bison parser, made by GNU Bison 2.5. */ - -/* Bison implementation for Yacc-like parsers in C - - Copyright (C) 1984, 1989-1990, 2000-2011 Free Software Foundation, Inc. - - This program is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see <http://www.gnu.org/licenses/>. */ - -/* As a special exception, you may create a larger work that contains - part or all of the Bison parser skeleton and distribute that work - under terms of your choice, so long as that work isn't itself a - parser generator using the skeleton or a modified version thereof - as a parser skeleton. Alternatively, if you modify or redistribute - the parser skeleton itself, you may (at your option) remove this - special exception, which will cause the skeleton and the resulting - Bison output files to be licensed under the GNU General Public - License without this special exception. - - This special exception was added by the Free Software Foundation in - version 2.2 of Bison. */ - -/* C LALR(1) parser skeleton written by Richard Stallman, by - simplifying the original so-called "semantic" parser. */ - -/* All symbols defined below should begin with yy or YY, to avoid - infringing on user name space. This should be done even for local - variables, as they might otherwise be expanded by user macros. - There are some unavoidable exceptions within include files to - define necessary library symbols; they are noted "INFRINGES ON - USER NAME SPACE" below. */ - -/* Identify Bison output. */ -#define YYBISON 1 - -/* Bison version. */ -#define YYBISON_VERSION "2.5" - -/* Skeleton name. */ -#define YYSKELETON_NAME "yacc.c" - -/* Pure parsers. */ -#define YYPURE 0 - -/* Push parsers. */ -#define YYPUSH 0 - -/* Pull parsers. */ -#define YYPULL 1 - -/* Using locations. */ -#define YYLSP_NEEDED 0 - -/* Substitute the variable and function names. */ -#define yyparse zconfparse -#define yylex zconflex -#define yyerror zconferror -#define yylval zconflval -#define yychar zconfchar -#define yydebug zconfdebug -#define yynerrs zconfnerrs - - -/* Copy the first part of user declarations. */ - - -/* - * Copyright (C) 2002 Roman Zippel <zippel@linux-m68k.org> - * Released under the terms of the GNU GPL v2.0. - */ - -#include <ctype.h> -#include <stdarg.h> -#include <stdio.h> -#include <stdlib.h> -#include <string.h> -#include <stdbool.h> - -#include "lkc.h" - -#define printd(mask, fmt...) if (cdebug & (mask)) printf(fmt) - -#define PRINTD 0x0001 -#define DEBUG_PARSE 0x0002 - -int cdebug = PRINTD; - -extern int zconflex(void); -static void zconfprint(const char *err, ...); -static void zconf_error(const char *err, ...); -static void zconferror(const char *err); -static bool zconf_endtoken(const struct kconf_id *id, int starttoken, int endtoken); - -struct symbol *symbol_hash[SYMBOL_HASHSIZE]; - -static struct menu *current_menu, *current_entry; - - - - -/* Enabling traces. */ -#ifndef YYDEBUG -# define YYDEBUG 1 -#endif - -/* Enabling verbose error messages. */ -#ifdef YYERROR_VERBOSE -# undef YYERROR_VERBOSE -# define YYERROR_VERBOSE 1 -#else -# define YYERROR_VERBOSE 0 -#endif - -/* Enabling the token table. */ -#ifndef YYTOKEN_TABLE -# define YYTOKEN_TABLE 0 -#endif - - -/* Tokens. */ -#ifndef YYTOKENTYPE -# define YYTOKENTYPE - /* Put the tokens into the symbol table, so that GDB and other debuggers - know about them. */ - enum yytokentype { - T_MAINMENU = 258, - T_MENU = 259, - T_ENDMENU = 260, - T_SOURCE = 261, - T_CHOICE = 262, - T_ENDCHOICE = 263, - T_COMMENT = 264, - T_CONFIG = 265, - T_MENUCONFIG = 266, - T_HELP = 267, - T_HELPTEXT = 268, - T_IF = 269, - T_ENDIF = 270, - T_DEPENDS = 271, - T_OPTIONAL = 272, - T_PROMPT = 273, - T_TYPE = 274, - T_DEFAULT = 275, - T_SELECT = 276, - T_RANGE = 277, - T_VISIBLE = 278, - T_OPTION = 279, - T_ON = 280, - T_WORD = 281, - T_WORD_QUOTE = 282, - T_UNEQUAL = 283, - T_CLOSE_PAREN = 284, - T_OPEN_PAREN = 285, - T_EOL = 286, - T_OR = 287, - T_AND = 288, - T_EQUAL = 289, - T_NOT = 290 - }; -#endif - - - -#if ! defined YYSTYPE && ! defined YYSTYPE_IS_DECLARED -typedef union YYSTYPE -{ - - - char *string; - struct file *file; - struct symbol *symbol; - struct expr *expr; - struct menu *menu; - const struct kconf_id *id; - - - -} YYSTYPE; -# define YYSTYPE_IS_TRIVIAL 1 -# define yystype YYSTYPE /* obsolescent; will be withdrawn */ -# define YYSTYPE_IS_DECLARED 1 -#endif - - -/* Copy the second part of user declarations. */ - - -/* Include zconf.hash.c here so it can see the token constants. */ -#include "zconf.hash.c" - - - -#ifdef short -# undef short -#endif - -#ifdef YYTYPE_UINT8 -typedef YYTYPE_UINT8 yytype_uint8; -#else -typedef unsigned char yytype_uint8; -#endif - -#ifdef YYTYPE_INT8 -typedef YYTYPE_INT8 yytype_int8; -#elif (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) -typedef signed char yytype_int8; -#else -typedef short int yytype_int8; -#endif - -#ifdef YYTYPE_UINT16 -typedef YYTYPE_UINT16 yytype_uint16; -#else -typedef unsigned short int yytype_uint16; -#endif - -#ifdef YYTYPE_INT16 -typedef YYTYPE_INT16 yytype_int16; -#else -typedef short int yytype_int16; -#endif - -#ifndef YYSIZE_T -# ifdef __SIZE_TYPE__ -# define YYSIZE_T __SIZE_TYPE__ -# elif defined size_t -# define YYSIZE_T size_t -# elif ! defined YYSIZE_T && (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) -# include <stddef.h> /* INFRINGES ON USER NAME SPACE */ -# define YYSIZE_T size_t -# else -# define YYSIZE_T unsigned int -# endif -#endif - -#define YYSIZE_MAXIMUM ((YYSIZE_T) -1) - -#ifndef YY_ -# if defined YYENABLE_NLS && YYENABLE_NLS -# if ENABLE_NLS -# include <libintl.h> /* INFRINGES ON USER NAME SPACE */ -# define YY_(msgid) dgettext ("bison-runtime", msgid) -# endif -# endif -# ifndef YY_ -# define YY_(msgid) msgid -# endif -#endif - -/* Suppress unused-variable warnings by "using" E. */ -#if ! defined lint || defined __GNUC__ -# define YYUSE(e) ((void) (e)) -#else -# define YYUSE(e) /* empty */ -#endif - -/* Identity function, used to suppress warnings about constant conditions. */ -#ifndef lint -# define YYID(n) (n) -#else -#if (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) -static int -YYID (int yyi) -#else -static int -YYID (yyi) - int yyi; -#endif -{ - return yyi; -} -#endif - -#if ! defined yyoverflow || YYERROR_VERBOSE - -/* The parser invokes alloca or malloc; define the necessary symbols. */ - -# ifdef YYSTACK_USE_ALLOCA -# if YYSTACK_USE_ALLOCA -# ifdef __GNUC__ -# define YYSTACK_ALLOC __builtin_alloca -# elif defined __BUILTIN_VA_ARG_INCR -# include <alloca.h> /* INFRINGES ON USER NAME SPACE */ -# elif defined _AIX -# define YYSTACK_ALLOC __alloca -# elif defined _MSC_VER -# include <malloc.h> /* INFRINGES ON USER NAME SPACE */ -# define alloca _alloca -# else -# define YYSTACK_ALLOC alloca -# if ! defined _ALLOCA_H && ! defined EXIT_SUCCESS && (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) -# include <stdlib.h> /* INFRINGES ON USER NAME SPACE */ -# ifndef EXIT_SUCCESS -# define EXIT_SUCCESS 0 -# endif -# endif -# endif -# endif -# endif - -# ifdef YYSTACK_ALLOC - /* Pacify GCC's `empty if-body' warning. */ -# define YYSTACK_FREE(Ptr) do { /* empty */; } while (YYID (0)) -# ifndef YYSTACK_ALLOC_MAXIMUM - /* The OS might guarantee only one guard page at the bottom of the stack, - and a page size can be as small as 4096 bytes. So we cannot safely - invoke alloca (N) if N exceeds 4096. Use a slightly smaller number - to allow for a few compiler-allocated temporary stack slots. */ -# define YYSTACK_ALLOC_MAXIMUM 4032 /* reasonable circa 2006 */ -# endif -# else -# define YYSTACK_ALLOC YYMALLOC -# define YYSTACK_FREE YYFREE -# ifndef YYSTACK_ALLOC_MAXIMUM -# define YYSTACK_ALLOC_MAXIMUM YYSIZE_MAXIMUM -# endif -# if (defined __cplusplus && ! defined EXIT_SUCCESS \ - && ! ((defined YYMALLOC || defined malloc) \ - && (defined YYFREE || defined free))) -# include <stdlib.h> /* INFRINGES ON USER NAME SPACE */ -# ifndef EXIT_SUCCESS -# define EXIT_SUCCESS 0 -# endif -# endif -# ifndef YYMALLOC -# define YYMALLOC malloc -# if ! defined malloc && ! defined EXIT_SUCCESS && (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) -void *malloc (YYSIZE_T); /* INFRINGES ON USER NAME SPACE */ -# endif -# endif -# ifndef YYFREE -# define YYFREE free -# if ! defined free && ! defined EXIT_SUCCESS && (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) -void free (void *); /* INFRINGES ON USER NAME SPACE */ -# endif -# endif -# endif -#endif /* ! defined yyoverflow || YYERROR_VERBOSE */ - - -#if (! defined yyoverflow \ - && (! defined __cplusplus \ - || (defined YYSTYPE_IS_TRIVIAL && YYSTYPE_IS_TRIVIAL))) - -/* A type that is properly aligned for any stack member. */ -union yyalloc -{ - yytype_int16 yyss_alloc; - YYSTYPE yyvs_alloc; -}; - -/* The size of the maximum gap between one aligned stack and the next. */ -# define YYSTACK_GAP_MAXIMUM (sizeof (union yyalloc) - 1) - -/* The size of an array large to enough to hold all stacks, each with - N elements. */ -# define YYSTACK_BYTES(N) \ - ((N) * (sizeof (yytype_int16) + sizeof (YYSTYPE)) \ - + YYSTACK_GAP_MAXIMUM) - -# define YYCOPY_NEEDED 1 - -/* Relocate STACK from its old location to the new one. The - local variables YYSIZE and YYSTACKSIZE give the old and new number of - elements in the stack, and YYPTR gives the new location of the - stack. Advance YYPTR to a properly aligned location for the next - stack. */ -# define YYSTACK_RELOCATE(Stack_alloc, Stack) \ - do \ - { \ - YYSIZE_T yynewbytes; \ - YYCOPY (&yyptr->Stack_alloc, Stack, yysize); \ - Stack = &yyptr->Stack_alloc; \ - yynewbytes = yystacksize * sizeof (*Stack) + YYSTACK_GAP_MAXIMUM; \ - yyptr += yynewbytes / sizeof (*yyptr); \ - } \ - while (YYID (0)) - -#endif - -#if defined YYCOPY_NEEDED && YYCOPY_NEEDED -/* Copy COUNT objects from FROM to TO. The source and destination do - not overlap. */ -# ifndef YYCOPY -# if defined __GNUC__ && 1 < __GNUC__ -# define YYCOPY(To, From, Count) \ - __builtin_memcpy (To, From, (Count) * sizeof (*(From))) -# else -# define YYCOPY(To, From, Count) \ - do \ - { \ - YYSIZE_T yyi; \ - for (yyi = 0; yyi < (Count); yyi++) \ - (To)[yyi] = (From)[yyi]; \ - } \ - while (YYID (0)) -# endif -# endif -#endif /* !YYCOPY_NEEDED */ - -/* YYFINAL -- State number of the termination state. */ -#define YYFINAL 11 -/* YYLAST -- Last index in YYTABLE. */ -#define YYLAST 290 - -/* YYNTOKENS -- Number of terminals. */ -#define YYNTOKENS 36 -/* YYNNTS -- Number of nonterminals. */ -#define YYNNTS 50 -/* YYNRULES -- Number of rules. */ -#define YYNRULES 118 -/* YYNRULES -- Number of states. */ -#define YYNSTATES 191 - -/* YYTRANSLATE(YYLEX) -- Bison symbol number corresponding to YYLEX. */ -#define YYUNDEFTOK 2 -#define YYMAXUTOK 290 - -#define YYTRANSLATE(YYX) \ - ((unsigned int) (YYX) <= YYMAXUTOK ? yytranslate[YYX] : YYUNDEFTOK) - -/* YYTRANSLATE[YYLEX] -- Bison symbol number corresponding to YYLEX. */ -static const yytype_uint8 yytranslate[] = -{ - 0, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 1, 2, 3, 4, - 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, - 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, - 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, - 35 -}; - -#if YYDEBUG -/* YYPRHS[YYN] -- Index of the first RHS symbol of rule number YYN in - YYRHS. */ -static const yytype_uint16 yyprhs[] = -{ - 0, 0, 3, 6, 8, 11, 13, 14, 17, 20, - 23, 26, 31, 36, 40, 42, 44, 46, 48, 50, - 52, 54, 56, 58, 60, 62, 64, 66, 68, 72, - 75, 79, 82, 86, 89, 90, 93, 96, 99, 102, - 105, 108, 112, 117, 122, 127, 133, 137, 138, 142, - 143, 146, 150, 153, 155, 159, 160, 163, 166, 169, - 172, 175, 180, 184, 187, 192, 193, 196, 200, 202, - 206, 207, 210, 213, 216, 220, 224, 228, 230, 234, - 235, 238, 241, 244, 248, 252, 255, 258, 261, 262, - 265, 268, 271, 276, 277, 280, 283, 286, 287, 290, - 292, 294, 297, 300, 303, 305, 308, 309, 312, 314, - 318, 322, 326, 329, 333, 337, 339, 341, 342 -}; - -/* YYRHS -- A `-1'-separated list of the rules' RHS. */ -static const yytype_int8 yyrhs[] = -{ - 37, 0, -1, 81, 38, -1, 38, -1, 63, 39, - -1, 39, -1, -1, 39, 41, -1, 39, 55, -1, - 39, 67, -1, 39, 80, -1, 39, 26, 1, 31, - -1, 39, 40, 1, 31, -1, 39, 1, 31, -1, - 16, -1, 18, -1, 19, -1, 21, -1, 17, -1, - 22, -1, 20, -1, 23, -1, 31, -1, 61, -1, - 71, -1, 44, -1, 46, -1, 69, -1, 26, 1, - 31, -1, 1, 31, -1, 10, 26, 31, -1, 43, - 47, -1, 11, 26, 31, -1, 45, 47, -1, -1, - 47, 48, -1, 47, 49, -1, 47, 75, -1, 47, - 73, -1, 47, 42, -1, 47, 31, -1, 19, 78, - 31, -1, 18, 79, 82, 31, -1, 20, 83, 82, - 31, -1, 21, 26, 82, 31, -1, 22, 84, 84, - 82, 31, -1, 24, 50, 31, -1, -1, 50, 26, - 51, -1, -1, 34, 79, -1, 7, 85, 31, -1, - 52, 56, -1, 80, -1, 53, 58, 54, -1, -1, - 56, 57, -1, 56, 75, -1, 56, 73, -1, 56, - 31, -1, 56, 42, -1, 18, 79, 82, 31, -1, - 19, 78, 31, -1, 17, 31, -1, 20, 26, 82, - 31, -1, -1, 58, 41, -1, 14, 83, 81, -1, - 80, -1, 59, 62, 60, -1, -1, 62, 41, -1, - 62, 67, -1, 62, 55, -1, 3, 79, 81, -1, - 4, 79, 31, -1, 64, 76, 74, -1, 80, -1, - 65, 68, 66, -1, -1, 68, 41, -1, 68, 67, - -1, 68, 55, -1, 6, 79, 31, -1, 9, 79, - 31, -1, 70, 74, -1, 12, 31, -1, 72, 13, - -1, -1, 74, 75, -1, 74, 31, -1, 74, 42, - -1, 16, 25, 83, 31, -1, -1, 76, 77, -1, - 76, 31, -1, 23, 82, -1, -1, 79, 82, -1, - 26, -1, 27, -1, 5, 31, -1, 8, 31, -1, - 15, 31, -1, 31, -1, 81, 31, -1, -1, 14, - 83, -1, 84, -1, 84, 34, 84, -1, 84, 28, - 84, -1, 30, 83, 29, -1, 35, 83, -1, 83, - 32, 83, -1, 83, 33, 83, -1, 26, -1, 27, - -1, -1, 26, -1 -}; - -/* YYRLINE[YYN] -- source line where rule number YYN was defined. */ -static const yytype_uint16 yyrline[] = -{ - 0, 103, 103, 103, 105, 105, 107, 109, 110, 111, - 112, 113, 114, 118, 122, 122, 122, 122, 122, 122, - 122, 122, 126, 127, 128, 129, 130, 131, 135, 136, - 142, 150, 156, 164, 174, 176, 177, 178, 179, 180, - 181, 184, 192, 198, 208, 214, 220, 223, 225, 236, - 237, 242, 251, 256, 264, 267, 269, 270, 271, 272, - 273, 276, 282, 293, 299, 309, 311, 316, 324, 332, - 335, 337, 338, 339, 344, 351, 358, 363, 371, 374, - 376, 377, 378, 381, 389, 396, 403, 409, 416, 418, - 419, 420, 423, 431, 433, 434, 437, 444, 446, 451, - 452, 455, 456, 457, 461, 462, 465, 466, 469, 470, - 471, 472, 473, 474, 475, 478, 479, 482, 483 -}; -#endif - -#if YYDEBUG || YYERROR_VERBOSE || YYTOKEN_TABLE -/* YYTNAME[SYMBOL-NUM] -- String name of the symbol SYMBOL-NUM. - First, the terminals, then, starting at YYNTOKENS, nonterminals. */ -static const char *const yytname[] = -{ - "$end", "error", "$undefined", "T_MAINMENU", "T_MENU", "T_ENDMENU", - "T_SOURCE", "T_CHOICE", "T_ENDCHOICE", "T_COMMENT", "T_CONFIG", - "T_MENUCONFIG", "T_HELP", "T_HELPTEXT", "T_IF", "T_ENDIF", "T_DEPENDS", - "T_OPTIONAL", "T_PROMPT", "T_TYPE", "T_DEFAULT", "T_SELECT", "T_RANGE", - "T_VISIBLE", "T_OPTION", "T_ON", "T_WORD", "T_WORD_QUOTE", "T_UNEQUAL", - "T_CLOSE_PAREN", "T_OPEN_PAREN", "T_EOL", "T_OR", "T_AND", "T_EQUAL", - "T_NOT", "$accept", "input", "start", "stmt_list", "option_name", - "common_stmt", "option_error", "config_entry_start", "config_stmt", - "menuconfig_entry_start", "menuconfig_stmt", "config_option_list", - "config_option", "symbol_option", "symbol_option_list", - "symbol_option_arg", "choice", "choice_entry", "choice_end", - "choice_stmt", "choice_option_list", "choice_option", "choice_block", - "if_entry", "if_end", "if_stmt", "if_block", "mainmenu_stmt", "menu", - "menu_entry", "menu_end", "menu_stmt", "menu_block", "source_stmt", - "comment", "comment_stmt", "help_start", "help", "depends_list", - "depends", "visibility_list", "visible", "prompt_stmt_opt", "prompt", - "end", "nl", "if_expr", "expr", "symbol", "word_opt", 0 -}; -#endif - -# ifdef YYPRINT -/* YYTOKNUM[YYLEX-NUM] -- Internal token number corresponding to - token YYLEX-NUM. */ -static const yytype_uint16 yytoknum[] = -{ - 0, 256, 257, 258, 259, 260, 261, 262, 263, 264, - 265, 266, 267, 268, 269, 270, 271, 272, 273, 274, - 275, 276, 277, 278, 279, 280, 281, 282, 283, 284, - 285, 286, 287, 288, 289, 290 -}; -# endif - -/* YYR1[YYN] -- Symbol number of symbol that rule YYN derives. */ -static const yytype_uint8 yyr1[] = -{ - 0, 36, 37, 37, 38, 38, 39, 39, 39, 39, - 39, 39, 39, 39, 40, 40, 40, 40, 40, 40, - 40, 40, 41, 41, 41, 41, 41, 41, 42, 42, - 43, 44, 45, 46, 47, 47, 47, 47, 47, 47, - 47, 48, 48, 48, 48, 48, 49, 50, 50, 51, - 51, 52, 53, 54, 55, 56, 56, 56, 56, 56, - 56, 57, 57, 57, 57, 58, 58, 59, 60, 61, - 62, 62, 62, 62, 63, 64, 65, 66, 67, 68, - 68, 68, 68, 69, 70, 71, 72, 73, 74, 74, - 74, 74, 75, 76, 76, 76, 77, 78, 78, 79, - 79, 80, 80, 80, 81, 81, 82, 82, 83, 83, - 83, 83, 83, 83, 83, 84, 84, 85, 85 -}; - -/* YYR2[YYN] -- Number of symbols composing right hand side of rule YYN. */ -static const yytype_uint8 yyr2[] = -{ - 0, 2, 2, 1, 2, 1, 0, 2, 2, 2, - 2, 4, 4, 3, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 3, 2, - 3, 2, 3, 2, 0, 2, 2, 2, 2, 2, - 2, 3, 4, 4, 4, 5, 3, 0, 3, 0, - 2, 3, 2, 1, 3, 0, 2, 2, 2, 2, - 2, 4, 3, 2, 4, 0, 2, 3, 1, 3, - 0, 2, 2, 2, 3, 3, 3, 1, 3, 0, - 2, 2, 2, 3, 3, 2, 2, 2, 0, 2, - 2, 2, 4, 0, 2, 2, 2, 0, 2, 1, - 1, 2, 2, 2, 1, 2, 0, 2, 1, 3, - 3, 3, 2, 3, 3, 1, 1, 0, 1 -}; - -/* YYDEFACT[STATE-NAME] -- Default reduction number in state STATE-NUM. - Performed when YYTABLE doesn't specify something else to do. Zero - means the default is an error. */ -static const yytype_uint8 yydefact[] = -{ - 6, 0, 104, 0, 3, 0, 6, 6, 99, 100, - 0, 1, 0, 0, 0, 0, 117, 0, 0, 0, - 0, 0, 0, 14, 18, 15, 16, 20, 17, 19, - 21, 0, 22, 0, 7, 34, 25, 34, 26, 55, - 65, 8, 70, 23, 93, 79, 9, 27, 88, 24, - 10, 0, 105, 2, 74, 13, 0, 101, 0, 118, - 0, 102, 0, 0, 0, 115, 116, 0, 0, 0, - 108, 103, 0, 0, 0, 0, 0, 0, 0, 88, - 0, 0, 75, 83, 51, 84, 30, 32, 0, 112, - 0, 0, 67, 0, 0, 11, 12, 0, 0, 0, - 0, 97, 0, 0, 0, 47, 0, 40, 39, 35, - 36, 0, 38, 37, 0, 0, 97, 0, 59, 60, - 56, 58, 57, 66, 54, 53, 71, 73, 69, 72, - 68, 106, 95, 0, 94, 80, 82, 78, 81, 77, - 90, 91, 89, 111, 113, 114, 110, 109, 29, 86, - 0, 106, 0, 106, 106, 106, 0, 0, 0, 87, - 63, 106, 0, 106, 0, 96, 0, 0, 41, 98, - 0, 0, 106, 49, 46, 28, 0, 62, 0, 107, - 92, 42, 43, 44, 0, 0, 48, 61, 64, 45, - 50 -}; - -/* YYDEFGOTO[NTERM-NUM]. */ -static const yytype_int16 yydefgoto[] = -{ - -1, 3, 4, 5, 33, 34, 108, 35, 36, 37, - 38, 74, 109, 110, 157, 186, 39, 40, 124, 41, - 76, 120, 77, 42, 128, 43, 78, 6, 44, 45, - 137, 46, 80, 47, 48, 49, 111, 112, 81, 113, - 79, 134, 152, 153, 50, 7, 165, 69, 70, 60 -}; - -/* YYPACT[STATE-NUM] -- Index in YYTABLE of the portion describing - STATE-NUM. */ -#define YYPACT_NINF -90 -static const yytype_int16 yypact[] = -{ - 4, 42, -90, 96, -90, 111, -90, 15, -90, -90, - 75, -90, 82, 42, 104, 42, 110, 107, 42, 115, - 125, -4, 121, -90, -90, -90, -90, -90, -90, -90, - -90, 162, -90, 163, -90, -90, -90, -90, -90, -90, - -90, -90, -90, -90, -90, -90, -90, -90, -90, -90, - -90, 139, -90, -90, 138, -90, 142, -90, 143, -90, - 152, -90, 164, 167, 168, -90, -90, -4, -4, 77, - -18, -90, 177, 185, 33, 71, 195, 247, 236, -2, - 236, 171, -90, -90, -90, -90, -90, -90, 41, -90, - -4, -4, 138, 97, 97, -90, -90, 186, 187, 194, - 42, 42, -4, 196, 97, -90, 219, -90, -90, -90, - -90, 210, -90, -90, 204, 42, 42, 199, -90, -90, - -90, -90, -90, -90, -90, -90, -90, -90, -90, -90, - -90, 222, -90, 223, -90, -90, -90, -90, -90, -90, - -90, -90, -90, -90, 215, -90, -90, -90, -90, -90, - -4, 222, 228, 222, -5, 222, 97, 35, 229, -90, - -90, 222, 232, 222, -4, -90, 135, 233, -90, -90, - 234, 235, 222, 240, -90, -90, 237, -90, 239, -13, - -90, -90, -90, -90, 244, 42, -90, -90, -90, -90, - -90 -}; - -/* YYPGOTO[NTERM-NUM]. */ -static const yytype_int16 yypgoto[] = -{ - -90, -90, 269, 271, -90, 23, -70, -90, -90, -90, - -90, 243, -90, -90, -90, -90, -90, -90, -90, -48, - -90, -90, -90, -90, -90, -90, -90, -90, -90, -90, - -90, -20, -90, -90, -90, -90, -90, 206, 205, -68, - -90, -90, 169, -1, 27, -7, 118, -66, -89, -90 -}; - -/* YYTABLE[YYPACT[STATE-NUM]]. What to do in state STATE-NUM. If - positive, shift that token. If negative, reduce the rule which - number is the opposite. If YYTABLE_NINF, syntax error. */ -#define YYTABLE_NINF -86 -static const yytype_int16 yytable[] = -{ - 10, 88, 89, 54, 146, 147, 119, 1, 122, 164, - 93, 141, 56, 142, 58, 156, 94, 62, 1, 90, - 91, 131, 65, 66, 144, 145, 67, 90, 91, 132, - 127, 68, 136, -31, 97, 2, 154, -31, -31, -31, - -31, -31, -31, -31, -31, 98, 52, -31, -31, 99, - -31, 100, 101, 102, 103, 104, -31, 105, 129, 106, - 138, 173, 92, 141, 107, 142, 174, 172, 8, 9, - 143, -33, 97, 90, 91, -33, -33, -33, -33, -33, - -33, -33, -33, 98, 166, -33, -33, 99, -33, 100, - 101, 102, 103, 104, -33, 105, 11, 106, 179, 151, - 123, 126, 107, 135, 125, 130, 2, 139, 2, 90, - 91, -5, 12, 55, 161, 13, 14, 15, 16, 17, - 18, 19, 20, 65, 66, 21, 22, 23, 24, 25, - 26, 27, 28, 29, 30, 57, 59, 31, 61, -4, - 12, 63, 32, 13, 14, 15, 16, 17, 18, 19, - 20, 64, 71, 21, 22, 23, 24, 25, 26, 27, - 28, 29, 30, 72, 73, 31, 180, 90, 91, 52, - 32, -85, 97, 82, 83, -85, -85, -85, -85, -85, - -85, -85, -85, 84, 190, -85, -85, 99, -85, -85, - -85, -85, -85, -85, -85, 85, 97, 106, 86, 87, - -52, -52, 140, -52, -52, -52, -52, 98, 95, -52, - -52, 99, 114, 115, 116, 117, 96, 148, 149, 150, - 158, 106, 155, 159, 97, 163, 118, -76, -76, -76, - -76, -76, -76, -76, -76, 160, 164, -76, -76, 99, - 13, 14, 15, 16, 17, 18, 19, 20, 91, 106, - 21, 22, 14, 15, 140, 17, 18, 19, 20, 168, - 175, 21, 22, 177, 181, 182, 183, 32, 187, 167, - 188, 169, 170, 171, 185, 189, 53, 51, 32, 176, - 75, 178, 121, 0, 133, 162, 0, 0, 0, 0, - 184 -}; - -#define yypact_value_is_default(yystate) \ - ((yystate) == (-90)) - -#define yytable_value_is_error(yytable_value) \ - YYID (0) - -static const yytype_int16 yycheck[] = -{ - 1, 67, 68, 10, 93, 94, 76, 3, 76, 14, - 28, 81, 13, 81, 15, 104, 34, 18, 3, 32, - 33, 23, 26, 27, 90, 91, 30, 32, 33, 31, - 78, 35, 80, 0, 1, 31, 102, 4, 5, 6, - 7, 8, 9, 10, 11, 12, 31, 14, 15, 16, - 17, 18, 19, 20, 21, 22, 23, 24, 78, 26, - 80, 26, 69, 133, 31, 133, 31, 156, 26, 27, - 29, 0, 1, 32, 33, 4, 5, 6, 7, 8, - 9, 10, 11, 12, 150, 14, 15, 16, 17, 18, - 19, 20, 21, 22, 23, 24, 0, 26, 164, 100, - 77, 78, 31, 80, 77, 78, 31, 80, 31, 32, - 33, 0, 1, 31, 115, 4, 5, 6, 7, 8, - 9, 10, 11, 26, 27, 14, 15, 16, 17, 18, - 19, 20, 21, 22, 23, 31, 26, 26, 31, 0, - 1, 26, 31, 4, 5, 6, 7, 8, 9, 10, - 11, 26, 31, 14, 15, 16, 17, 18, 19, 20, - 21, 22, 23, 1, 1, 26, 31, 32, 33, 31, - 31, 0, 1, 31, 31, 4, 5, 6, 7, 8, - 9, 10, 11, 31, 185, 14, 15, 16, 17, 18, - 19, 20, 21, 22, 23, 31, 1, 26, 31, 31, - 5, 6, 31, 8, 9, 10, 11, 12, 31, 14, - 15, 16, 17, 18, 19, 20, 31, 31, 31, 25, - 1, 26, 26, 13, 1, 26, 31, 4, 5, 6, - 7, 8, 9, 10, 11, 31, 14, 14, 15, 16, - 4, 5, 6, 7, 8, 9, 10, 11, 33, 26, - 14, 15, 5, 6, 31, 8, 9, 10, 11, 31, - 31, 14, 15, 31, 31, 31, 31, 31, 31, 151, - 31, 153, 154, 155, 34, 31, 7, 6, 31, 161, - 37, 163, 76, -1, 79, 116, -1, -1, -1, -1, - 172 -}; - -/* YYSTOS[STATE-NUM] -- The (internal number of the) accessing - symbol of state STATE-NUM. */ -static const yytype_uint8 yystos[] = -{ - 0, 3, 31, 37, 38, 39, 63, 81, 26, 27, - 79, 0, 1, 4, 5, 6, 7, 8, 9, 10, - 11, 14, 15, 16, 17, 18, 19, 20, 21, 22, - 23, 26, 31, 40, 41, 43, 44, 45, 46, 52, - 53, 55, 59, 61, 64, 65, 67, 69, 70, 71, - 80, 39, 31, 38, 81, 31, 79, 31, 79, 26, - 85, 31, 79, 26, 26, 26, 27, 30, 35, 83, - 84, 31, 1, 1, 47, 47, 56, 58, 62, 76, - 68, 74, 31, 31, 31, 31, 31, 31, 83, 83, - 32, 33, 81, 28, 34, 31, 31, 1, 12, 16, - 18, 19, 20, 21, 22, 24, 26, 31, 42, 48, - 49, 72, 73, 75, 17, 18, 19, 20, 31, 42, - 57, 73, 75, 41, 54, 80, 41, 55, 60, 67, - 80, 23, 31, 74, 77, 41, 55, 66, 67, 80, - 31, 42, 75, 29, 83, 83, 84, 84, 31, 31, - 25, 79, 78, 79, 83, 26, 84, 50, 1, 13, - 31, 79, 78, 26, 14, 82, 83, 82, 31, 82, - 82, 82, 84, 26, 31, 31, 82, 31, 82, 83, - 31, 31, 31, 31, 82, 34, 51, 31, 31, 31, - 79 -}; - -#define yyerrok (yyerrstatus = 0) -#define yyclearin (yychar = YYEMPTY) -#define YYEMPTY (-2) -#define YYEOF 0 - -#define YYACCEPT goto yyacceptlab -#define YYABORT goto yyabortlab -#define YYERROR goto yyerrorlab - - -/* Like YYERROR except do call yyerror. This remains here temporarily - to ease the transition to the new meaning of YYERROR, for GCC. - Once GCC version 2 has supplanted version 1, this can go. However, - YYFAIL appears to be in use. Nevertheless, it is formally deprecated - in Bison 2.4.2's NEWS entry, where a plan to phase it out is - discussed. */ - -#define YYFAIL goto yyerrlab -#if defined YYFAIL - /* This is here to suppress warnings from the GCC cpp's - -Wunused-macros. Normally we don't worry about that warning, but - some users do, and we want to make it easy for users to remove - YYFAIL uses, which will produce warnings from Bison 2.5. */ -#endif - -#define YYRECOVERING() (!!yyerrstatus) - -#define YYBACKUP(Token, Value) \ -do \ - if (yychar == YYEMPTY && yylen == 1) \ - { \ - yychar = (Token); \ - yylval = (Value); \ - YYPOPSTACK (1); \ - goto yybackup; \ - } \ - else \ - { \ - yyerror (YY_("syntax error: cannot back up")); \ - YYERROR; \ - } \ -while (YYID (0)) - - -#define YYTERROR 1 -#define YYERRCODE 256 - - -/* YYLLOC_DEFAULT -- Set CURRENT to span from RHS[1] to RHS[N]. - If N is 0, then set CURRENT to the empty location which ends - the previous symbol: RHS[0] (always defined). */ - -#define YYRHSLOC(Rhs, K) ((Rhs)[K]) -#ifndef YYLLOC_DEFAULT -# define YYLLOC_DEFAULT(Current, Rhs, N) \ - do \ - if (YYID (N)) \ - { \ - (Current).first_line = YYRHSLOC (Rhs, 1).first_line; \ - (Current).first_column = YYRHSLOC (Rhs, 1).first_column; \ - (Current).last_line = YYRHSLOC (Rhs, N).last_line; \ - (Current).last_column = YYRHSLOC (Rhs, N).last_column; \ - } \ - else \ - { \ - (Current).first_line = (Current).last_line = \ - YYRHSLOC (Rhs, 0).last_line; \ - (Current).first_column = (Current).last_column = \ - YYRHSLOC (Rhs, 0).last_column; \ - } \ - while (YYID (0)) -#endif - - -/* This macro is provided for backward compatibility. */ - -#ifndef YY_LOCATION_PRINT -# define YY_LOCATION_PRINT(File, Loc) ((void) 0) -#endif - - -/* YYLEX -- calling `yylex' with the right arguments. */ - -#ifdef YYLEX_PARAM -# define YYLEX yylex (YYLEX_PARAM) -#else -# define YYLEX yylex () -#endif - -/* Enable debugging if requested. */ -#if YYDEBUG - -# ifndef YYFPRINTF -# include <stdio.h> /* INFRINGES ON USER NAME SPACE */ -# define YYFPRINTF fprintf -# endif - -# define YYDPRINTF(Args) \ -do { \ - if (yydebug) \ - YYFPRINTF Args; \ -} while (YYID (0)) - -# define YY_SYMBOL_PRINT(Title, Type, Value, Location) \ -do { \ - if (yydebug) \ - { \ - YYFPRINTF (stderr, "%s ", Title); \ - yy_symbol_print (stderr, \ - Type, Value); \ - YYFPRINTF (stderr, "\n"); \ - } \ -} while (YYID (0)) - - -/*--------------------------------. -| Print this symbol on YYOUTPUT. | -`--------------------------------*/ - -/*ARGSUSED*/ -#if (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) -static void -yy_symbol_value_print (FILE *yyoutput, int yytype, YYSTYPE const * const yyvaluep) -#else -static void -yy_symbol_value_print (yyoutput, yytype, yyvaluep) - FILE *yyoutput; - int yytype; - YYSTYPE const * const yyvaluep; -#endif -{ - if (!yyvaluep) - return; -# ifdef YYPRINT - if (yytype < YYNTOKENS) - YYPRINT (yyoutput, yytoknum[yytype], *yyvaluep); -# else - YYUSE (yyoutput); -# endif - switch (yytype) - { - default: - break; - } -} - - -/*--------------------------------. -| Print this symbol on YYOUTPUT. | -`--------------------------------*/ - -#if (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) -static void -yy_symbol_print (FILE *yyoutput, int yytype, YYSTYPE const * const yyvaluep) -#else -static void -yy_symbol_print (yyoutput, yytype, yyvaluep) - FILE *yyoutput; - int yytype; - YYSTYPE const * const yyvaluep; -#endif -{ - if (yytype < YYNTOKENS) - YYFPRINTF (yyoutput, "token %s (", yytname[yytype]); - else - YYFPRINTF (yyoutput, "nterm %s (", yytname[yytype]); - - yy_symbol_value_print (yyoutput, yytype, yyvaluep); - YYFPRINTF (yyoutput, ")"); -} - -/*------------------------------------------------------------------. -| yy_stack_print -- Print the state stack from its BOTTOM up to its | -| TOP (included). | -`------------------------------------------------------------------*/ - -#if (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) -static void -yy_stack_print (yytype_int16 *yybottom, yytype_int16 *yytop) -#else -static void -yy_stack_print (yybottom, yytop) - yytype_int16 *yybottom; - yytype_int16 *yytop; -#endif -{ - YYFPRINTF (stderr, "Stack now"); - for (; yybottom <= yytop; yybottom++) - { - int yybot = *yybottom; - YYFPRINTF (stderr, " %d", yybot); - } - YYFPRINTF (stderr, "\n"); -} - -# define YY_STACK_PRINT(Bottom, Top) \ -do { \ - if (yydebug) \ - yy_stack_print ((Bottom), (Top)); \ -} while (YYID (0)) - - -/*------------------------------------------------. -| Report that the YYRULE is going to be reduced. | -`------------------------------------------------*/ - -#if (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) -static void -yy_reduce_print (YYSTYPE *yyvsp, int yyrule) -#else -static void -yy_reduce_print (yyvsp, yyrule) - YYSTYPE *yyvsp; - int yyrule; -#endif -{ - int yynrhs = yyr2[yyrule]; - int yyi; - unsigned long int yylno = yyrline[yyrule]; - YYFPRINTF (stderr, "Reducing stack by rule %d (line %lu):\n", - yyrule - 1, yylno); - /* The symbols being reduced. */ - for (yyi = 0; yyi < yynrhs; yyi++) - { - YYFPRINTF (stderr, " $%d = ", yyi + 1); - yy_symbol_print (stderr, yyrhs[yyprhs[yyrule] + yyi], - &(yyvsp[(yyi + 1) - (yynrhs)]) - ); - YYFPRINTF (stderr, "\n"); - } -} - -# define YY_REDUCE_PRINT(Rule) \ -do { \ - if (yydebug) \ - yy_reduce_print (yyvsp, Rule); \ -} while (YYID (0)) - -/* Nonzero means print parse trace. It is left uninitialized so that - multiple parsers can coexist. */ -int yydebug; -#else /* !YYDEBUG */ -# define YYDPRINTF(Args) -# define YY_SYMBOL_PRINT(Title, Type, Value, Location) -# define YY_STACK_PRINT(Bottom, Top) -# define YY_REDUCE_PRINT(Rule) -#endif /* !YYDEBUG */ - - -/* YYINITDEPTH -- initial size of the parser's stacks. */ -#ifndef YYINITDEPTH -# define YYINITDEPTH 200 -#endif - -/* YYMAXDEPTH -- maximum size the stacks can grow to (effective only - if the built-in stack extension method is used). - - Do not make this value too large; the results are undefined if - YYSTACK_ALLOC_MAXIMUM < YYSTACK_BYTES (YYMAXDEPTH) - evaluated with infinite-precision integer arithmetic. */ - -#ifndef YYMAXDEPTH -# define YYMAXDEPTH 10000 -#endif - - -#if YYERROR_VERBOSE - -# ifndef yystrlen -# if defined __GLIBC__ && defined _STRING_H -# define yystrlen strlen -# else -/* Return the length of YYSTR. */ -#if (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) -static YYSIZE_T -yystrlen (const char *yystr) -#else -static YYSIZE_T -yystrlen (yystr) - const char *yystr; -#endif -{ - YYSIZE_T yylen; - for (yylen = 0; yystr[yylen]; yylen++) - continue; - return yylen; -} -# endif -# endif - -# ifndef yystpcpy -# if defined __GLIBC__ && defined _STRING_H && defined _GNU_SOURCE -# define yystpcpy stpcpy -# else -/* Copy YYSRC to YYDEST, returning the address of the terminating '\0' in - YYDEST. */ -#if (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) -static char * -yystpcpy (char *yydest, const char *yysrc) -#else -static char * -yystpcpy (yydest, yysrc) - char *yydest; - const char *yysrc; -#endif -{ - char *yyd = yydest; - const char *yys = yysrc; - - while ((*yyd++ = *yys++) != '\0') - continue; - - return yyd - 1; -} -# endif -# endif - -# ifndef yytnamerr -/* Copy to YYRES the contents of YYSTR after stripping away unnecessary - quotes and backslashes, so that it's suitable for yyerror. The - heuristic is that double-quoting is unnecessary unless the string - contains an apostrophe, a comma, or backslash (other than - backslash-backslash). YYSTR is taken from yytname. If YYRES is - null, do not copy; instead, return the length of what the result - would have been. */ -static YYSIZE_T -yytnamerr (char *yyres, const char *yystr) -{ - if (*yystr == '"') - { - YYSIZE_T yyn = 0; - char const *yyp = yystr; - - for (;;) - switch (*++yyp) - { - case '\'': - case ',': - goto do_not_strip_quotes; - - case '\\': - if (*++yyp != '\\') - goto do_not_strip_quotes; - /* Fall through. */ - default: - if (yyres) - yyres[yyn] = *yyp; - yyn++; - break; - - case '"': - if (yyres) - yyres[yyn] = '\0'; - return yyn; - } - do_not_strip_quotes: ; - } - - if (! yyres) - return yystrlen (yystr); - - return yystpcpy (yyres, yystr) - yyres; -} -# endif - -/* Copy into *YYMSG, which is of size *YYMSG_ALLOC, an error message - about the unexpected token YYTOKEN for the state stack whose top is - YYSSP. - - Return 0 if *YYMSG was successfully written. Return 1 if *YYMSG is - not large enough to hold the message. In that case, also set - *YYMSG_ALLOC to the required number of bytes. Return 2 if the - required number of bytes is too large to store. */ -static int -yysyntax_error (YYSIZE_T *yymsg_alloc, char **yymsg, - yytype_int16 *yyssp, int yytoken) -{ - YYSIZE_T yysize0 = yytnamerr (0, yytname[yytoken]); - YYSIZE_T yysize = yysize0; - YYSIZE_T yysize1; - enum { YYERROR_VERBOSE_ARGS_MAXIMUM = 5 }; - /* Internationalized format string. */ - const char *yyformat = 0; - /* Arguments of yyformat. */ - char const *yyarg[YYERROR_VERBOSE_ARGS_MAXIMUM]; - /* Number of reported tokens (one for the "unexpected", one per - "expected"). */ - int yycount = 0; - - /* There are many possibilities here to consider: - - Assume YYFAIL is not used. It's too flawed to consider. See - <http://lists.gnu.org/archive/html/bison-patches/2009-12/msg00024.html> - for details. YYERROR is fine as it does not invoke this - function. - - If this state is a consistent state with a default action, then - the only way this function was invoked is if the default action - is an error action. In that case, don't check for expected - tokens because there are none. - - The only way there can be no lookahead present (in yychar) is if - this state is a consistent state with a default action. Thus, - detecting the absence of a lookahead is sufficient to determine - that there is no unexpected or expected token to report. In that - case, just report a simple "syntax error". - - Don't assume there isn't a lookahead just because this state is a - consistent state with a default action. There might have been a - previous inconsistent state, consistent state with a non-default - action, or user semantic action that manipulated yychar. - - Of course, the expected token list depends on states to have - correct lookahead information, and it depends on the parser not - to perform extra reductions after fetching a lookahead from the - scanner and before detecting a syntax error. Thus, state merging - (from LALR or IELR) and default reductions corrupt the expected - token list. However, the list is correct for canonical LR with - one exception: it will still contain any token that will not be - accepted due to an error action in a later state. - */ - if (yytoken != YYEMPTY) - { - int yyn = yypact[*yyssp]; - yyarg[yycount++] = yytname[yytoken]; - if (!yypact_value_is_default (yyn)) - { - /* Start YYX at -YYN if negative to avoid negative indexes in - YYCHECK. In other words, skip the first -YYN actions for - this state because they are default actions. */ - int yyxbegin = yyn < 0 ? -yyn : 0; - /* Stay within bounds of both yycheck and yytname. */ - int yychecklim = YYLAST - yyn + 1; - int yyxend = yychecklim < YYNTOKENS ? yychecklim : YYNTOKENS; - int yyx; - - for (yyx = yyxbegin; yyx < yyxend; ++yyx) - if (yycheck[yyx + yyn] == yyx && yyx != YYTERROR - && !yytable_value_is_error (yytable[yyx + yyn])) - { - if (yycount == YYERROR_VERBOSE_ARGS_MAXIMUM) - { - yycount = 1; - yysize = yysize0; - break; - } - yyarg[yycount++] = yytname[yyx]; - yysize1 = yysize + yytnamerr (0, yytname[yyx]); - if (! (yysize <= yysize1 - && yysize1 <= YYSTACK_ALLOC_MAXIMUM)) - return 2; - yysize = yysize1; - } - } - } - - switch (yycount) - { -# define YYCASE_(N, S) \ - case N: \ - yyformat = S; \ - break - YYCASE_(0, YY_("syntax error")); - YYCASE_(1, YY_("syntax error, unexpected %s")); - YYCASE_(2, YY_("syntax error, unexpected %s, expecting %s")); - YYCASE_(3, YY_("syntax error, unexpected %s, expecting %s or %s")); - YYCASE_(4, YY_("syntax error, unexpected %s, expecting %s or %s or %s")); - YYCASE_(5, YY_("syntax error, unexpected %s, expecting %s or %s or %s or %s")); -# undef YYCASE_ - } - - yysize1 = yysize + yystrlen (yyformat); - if (! (yysize <= yysize1 && yysize1 <= YYSTACK_ALLOC_MAXIMUM)) - return 2; - yysize = yysize1; - - if (*yymsg_alloc < yysize) - { - *yymsg_alloc = 2 * yysize; - if (! (yysize <= *yymsg_alloc - && *yymsg_alloc <= YYSTACK_ALLOC_MAXIMUM)) - *yymsg_alloc = YYSTACK_ALLOC_MAXIMUM; - return 1; - } - - /* Avoid sprintf, as that infringes on the user's name space. - Don't have undefined behavior even if the translation - produced a string with the wrong number of "%s"s. */ - { - char *yyp = *yymsg; - int yyi = 0; - while ((*yyp = *yyformat) != '\0') - if (*yyp == '%' && yyformat[1] == 's' && yyi < yycount) - { - yyp += yytnamerr (yyp, yyarg[yyi++]); - yyformat += 2; - } - else - { - yyp++; - yyformat++; - } - } - return 0; -} -#endif /* YYERROR_VERBOSE */ - -/*-----------------------------------------------. -| Release the memory associated to this symbol. | -`-----------------------------------------------*/ - -/*ARGSUSED*/ -#if (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) -static void -yydestruct (const char *yymsg, int yytype, YYSTYPE *yyvaluep) -#else -static void -yydestruct (yymsg, yytype, yyvaluep) - const char *yymsg; - int yytype; - YYSTYPE *yyvaluep; -#endif -{ - YYUSE (yyvaluep); - - if (!yymsg) - yymsg = "Deleting"; - YY_SYMBOL_PRINT (yymsg, yytype, yyvaluep, yylocationp); - - switch (yytype) - { - case 53: /* "choice_entry" */ - - { - fprintf(stderr, "%s:%d: missing end statement for this entry\n", - (yyvaluep->menu)->file->name, (yyvaluep->menu)->lineno); - if (current_menu == (yyvaluep->menu)) - menu_end_menu(); -}; - - break; - case 59: /* "if_entry" */ - - { - fprintf(stderr, "%s:%d: missing end statement for this entry\n", - (yyvaluep->menu)->file->name, (yyvaluep->menu)->lineno); - if (current_menu == (yyvaluep->menu)) - menu_end_menu(); -}; - - break; - case 65: /* "menu_entry" */ - - { - fprintf(stderr, "%s:%d: missing end statement for this entry\n", - (yyvaluep->menu)->file->name, (yyvaluep->menu)->lineno); - if (current_menu == (yyvaluep->menu)) - menu_end_menu(); -}; - - break; - - default: - break; - } -} - - -/* Prevent warnings from -Wmissing-prototypes. */ -#ifdef YYPARSE_PARAM -#if defined __STDC__ || defined __cplusplus -int yyparse (void *YYPARSE_PARAM); -#else -int yyparse (); -#endif -#else /* ! YYPARSE_PARAM */ -#if defined __STDC__ || defined __cplusplus -int yyparse (void); -#else -int yyparse (); -#endif -#endif /* ! YYPARSE_PARAM */ - - -/* The lookahead symbol. */ -int yychar; - -/* The semantic value of the lookahead symbol. */ -YYSTYPE yylval; - -/* Number of syntax errors so far. */ -int yynerrs; - - -/*----------. -| yyparse. | -`----------*/ - -#ifdef YYPARSE_PARAM -#if (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) -int -yyparse (void *YYPARSE_PARAM) -#else -int -yyparse (YYPARSE_PARAM) - void *YYPARSE_PARAM; -#endif -#else /* ! YYPARSE_PARAM */ -#if (defined __STDC__ || defined __C99__FUNC__ \ - || defined __cplusplus || defined _MSC_VER) -int -yyparse (void) -#else -int -yyparse () - -#endif -#endif -{ - int yystate; - /* Number of tokens to shift before error messages enabled. */ - int yyerrstatus; - - /* The stacks and their tools: - `yyss': related to states. - `yyvs': related to semantic values. - - Refer to the stacks thru separate pointers, to allow yyoverflow - to reallocate them elsewhere. */ - - /* The state stack. */ - yytype_int16 yyssa[YYINITDEPTH]; - yytype_int16 *yyss; - yytype_int16 *yyssp; - - /* The semantic value stack. */ - YYSTYPE yyvsa[YYINITDEPTH]; - YYSTYPE *yyvs; - YYSTYPE *yyvsp; - - YYSIZE_T yystacksize; - - int yyn; - int yyresult; - /* Lookahead token as an internal (translated) token number. */ - int yytoken; - /* The variables used to return semantic value and location from the - action routines. */ - YYSTYPE yyval; - -#if YYERROR_VERBOSE - /* Buffer for error messages, and its allocated size. */ - char yymsgbuf[128]; - char *yymsg = yymsgbuf; - YYSIZE_T yymsg_alloc = sizeof yymsgbuf; -#endif - -#define YYPOPSTACK(N) (yyvsp -= (N), yyssp -= (N)) - - /* The number of symbols on the RHS of the reduced rule. - Keep to zero when no symbol should be popped. */ - int yylen = 0; - - yytoken = 0; - yyss = yyssa; - yyvs = yyvsa; - yystacksize = YYINITDEPTH; - - YYDPRINTF ((stderr, "Starting parse\n")); - - yystate = 0; - yyerrstatus = 0; - yynerrs = 0; - yychar = YYEMPTY; /* Cause a token to be read. */ - - /* Initialize stack pointers. - Waste one element of value and location stack - so that they stay on the same level as the state stack. - The wasted elements are never initialized. */ - yyssp = yyss; - yyvsp = yyvs; - - goto yysetstate; - -/*------------------------------------------------------------. -| yynewstate -- Push a new state, which is found in yystate. | -`------------------------------------------------------------*/ - yynewstate: - /* In all cases, when you get here, the value and location stacks - have just been pushed. So pushing a state here evens the stacks. */ - yyssp++; - - yysetstate: - *yyssp = yystate; - - if (yyss + yystacksize - 1 <= yyssp) - { - /* Get the current used size of the three stacks, in elements. */ - YYSIZE_T yysize = yyssp - yyss + 1; - -#ifdef yyoverflow - { - /* Give user a chance to reallocate the stack. Use copies of - these so that the &'s don't force the real ones into - memory. */ - YYSTYPE *yyvs1 = yyvs; - yytype_int16 *yyss1 = yyss; - - /* Each stack pointer address is followed by the size of the - data in use in that stack, in bytes. This used to be a - conditional around just the two extra args, but that might - be undefined if yyoverflow is a macro. */ - yyoverflow (YY_("memory exhausted"), - &yyss1, yysize * sizeof (*yyssp), - &yyvs1, yysize * sizeof (*yyvsp), - &yystacksize); - - yyss = yyss1; - yyvs = yyvs1; - } -#else /* no yyoverflow */ -# ifndef YYSTACK_RELOCATE - goto yyexhaustedlab; -# else - /* Extend the stack our own way. */ - if (YYMAXDEPTH <= yystacksize) - goto yyexhaustedlab; - yystacksize *= 2; - if (YYMAXDEPTH < yystacksize) - yystacksize = YYMAXDEPTH; - - { - yytype_int16 *yyss1 = yyss; - union yyalloc *yyptr = - (union yyalloc *) YYSTACK_ALLOC (YYSTACK_BYTES (yystacksize)); - if (! yyptr) - goto yyexhaustedlab; - YYSTACK_RELOCATE (yyss_alloc, yyss); - YYSTACK_RELOCATE (yyvs_alloc, yyvs); -# undef YYSTACK_RELOCATE - if (yyss1 != yyssa) - YYSTACK_FREE (yyss1); - } -# endif -#endif /* no yyoverflow */ - - yyssp = yyss + yysize - 1; - yyvsp = yyvs + yysize - 1; - - YYDPRINTF ((stderr, "Stack size increased to %lu\n", - (unsigned long int) yystacksize)); - - if (yyss + yystacksize - 1 <= yyssp) - YYABORT; - } - - YYDPRINTF ((stderr, "Entering state %d\n", yystate)); - - if (yystate == YYFINAL) - YYACCEPT; - - goto yybackup; - -/*-----------. -| yybackup. | -`-----------*/ -yybackup: - - /* Do appropriate processing given the current state. Read a - lookahead token if we need one and don't already have one. */ - - /* First try to decide what to do without reference to lookahead token. */ - yyn = yypact[yystate]; - if (yypact_value_is_default (yyn)) - goto yydefault; - - /* Not known => get a lookahead token if don't already have one. */ - - /* YYCHAR is either YYEMPTY or YYEOF or a valid lookahead symbol. */ - if (yychar == YYEMPTY) - { - YYDPRINTF ((stderr, "Reading a token: ")); - yychar = YYLEX; - } - - if (yychar <= YYEOF) - { - yychar = yytoken = YYEOF; - YYDPRINTF ((stderr, "Now at end of input.\n")); - } - else - { - yytoken = YYTRANSLATE (yychar); - YY_SYMBOL_PRINT ("Next token is", yytoken, &yylval, &yylloc); - } - - /* If the proper action on seeing token YYTOKEN is to reduce or to - detect an error, take that action. */ - yyn += yytoken; - if (yyn < 0 || YYLAST < yyn || yycheck[yyn] != yytoken) - goto yydefault; - yyn = yytable[yyn]; - if (yyn <= 0) - { - if (yytable_value_is_error (yyn)) - goto yyerrlab; - yyn = -yyn; - goto yyreduce; - } - - /* Count tokens shifted since error; after three, turn off error - status. */ - if (yyerrstatus) - yyerrstatus--; - - /* Shift the lookahead token. */ - YY_SYMBOL_PRINT ("Shifting", yytoken, &yylval, &yylloc); - - /* Discard the shifted token. */ - yychar = YYEMPTY; - - yystate = yyn; - *++yyvsp = yylval; - - goto yynewstate; - - -/*-----------------------------------------------------------. -| yydefault -- do the default action for the current state. | -`-----------------------------------------------------------*/ -yydefault: - yyn = yydefact[yystate]; - if (yyn == 0) - goto yyerrlab; - goto yyreduce; - - -/*-----------------------------. -| yyreduce -- Do a reduction. | -`-----------------------------*/ -yyreduce: - /* yyn is the number of a rule to reduce with. */ - yylen = yyr2[yyn]; - - /* If YYLEN is nonzero, implement the default value of the action: - `$$ = $1'. - - Otherwise, the following line sets YYVAL to garbage. - This behavior is undocumented and Bison - users should not rely upon it. Assigning to YYVAL - unconditionally makes the parser a bit smaller, and it avoids a - GCC warning that YYVAL may be used uninitialized. */ - yyval = yyvsp[1-yylen]; - - - YY_REDUCE_PRINT (yyn); - switch (yyn) - { - case 10: - - { zconf_error("unexpected end statement"); } - break; - - case 11: - - { zconf_error("unknown statement \"%s\"", (yyvsp[(2) - (4)].string)); } - break; - - case 12: - - { - zconf_error("unexpected option \"%s\"", kconf_id_strings + (yyvsp[(2) - (4)].id)->name); -} - break; - - case 13: - - { zconf_error("invalid statement"); } - break; - - case 28: - - { zconf_error("unknown option \"%s\"", (yyvsp[(1) - (3)].string)); } - break; - - case 29: - - { zconf_error("invalid option"); } - break; - - case 30: - - { - struct symbol *sym = sym_lookup((yyvsp[(2) - (3)].string), 0); - sym->flags |= SYMBOL_OPTIONAL; - menu_add_entry(sym); - printd(DEBUG_PARSE, "%s:%d:config %s\n", zconf_curname(), zconf_lineno(), (yyvsp[(2) - (3)].string)); -} - break; - - case 31: - - { - menu_end_entry(); - printd(DEBUG_PARSE, "%s:%d:endconfig\n", zconf_curname(), zconf_lineno()); -} - break; - - case 32: - - { - struct symbol *sym = sym_lookup((yyvsp[(2) - (3)].string), 0); - sym->flags |= SYMBOL_OPTIONAL; - menu_add_entry(sym); - printd(DEBUG_PARSE, "%s:%d:menuconfig %s\n", zconf_curname(), zconf_lineno(), (yyvsp[(2) - (3)].string)); -} - break; - - case 33: - - { - if (current_entry->prompt) - current_entry->prompt->type = P_MENU; - else - zconfprint("warning: menuconfig statement without prompt"); - menu_end_entry(); - printd(DEBUG_PARSE, "%s:%d:endconfig\n", zconf_curname(), zconf_lineno()); -} - break; - - case 41: - - { - menu_set_type((yyvsp[(1) - (3)].id)->stype); - printd(DEBUG_PARSE, "%s:%d:type(%u)\n", - zconf_curname(), zconf_lineno(), - (yyvsp[(1) - (3)].id)->stype); -} - break; - - case 42: - - { - menu_add_prompt(P_PROMPT, (yyvsp[(2) - (4)].string), (yyvsp[(3) - (4)].expr)); - printd(DEBUG_PARSE, "%s:%d:prompt\n", zconf_curname(), zconf_lineno()); -} - break; - - case 43: - - { - menu_add_expr(P_DEFAULT, (yyvsp[(2) - (4)].expr), (yyvsp[(3) - (4)].expr)); - if ((yyvsp[(1) - (4)].id)->stype != S_UNKNOWN) - menu_set_type((yyvsp[(1) - (4)].id)->stype); - printd(DEBUG_PARSE, "%s:%d:default(%u)\n", - zconf_curname(), zconf_lineno(), - (yyvsp[(1) - (4)].id)->stype); -} - break; - - case 44: - - { - menu_add_symbol(P_SELECT, sym_lookup((yyvsp[(2) - (4)].string), 0), (yyvsp[(3) - (4)].expr)); - printd(DEBUG_PARSE, "%s:%d:select\n", zconf_curname(), zconf_lineno()); -} - break; - - case 45: - - { - menu_add_expr(P_RANGE, expr_alloc_comp(E_RANGE,(yyvsp[(2) - (5)].symbol), (yyvsp[(3) - (5)].symbol)), (yyvsp[(4) - (5)].expr)); - printd(DEBUG_PARSE, "%s:%d:range\n", zconf_curname(), zconf_lineno()); -} - break; - - case 48: - - { - const struct kconf_id *id = kconf_id_lookup((yyvsp[(2) - (3)].string), strlen((yyvsp[(2) - (3)].string))); - if (id && id->flags & TF_OPTION) - menu_add_option(id->token, (yyvsp[(3) - (3)].string)); - else - zconfprint("warning: ignoring unknown option %s", (yyvsp[(2) - (3)].string)); - free((yyvsp[(2) - (3)].string)); -} - break; - - case 49: - - { (yyval.string) = NULL; } - break; - - case 50: - - { (yyval.string) = (yyvsp[(2) - (2)].string); } - break; - - case 51: - - { - struct symbol *sym = sym_lookup((yyvsp[(2) - (3)].string), SYMBOL_CHOICE); - sym->flags |= SYMBOL_AUTO; - menu_add_entry(sym); - menu_add_expr(P_CHOICE, NULL, NULL); - printd(DEBUG_PARSE, "%s:%d:choice\n", zconf_curname(), zconf_lineno()); -} - break; - - case 52: - - { - (yyval.menu) = menu_add_menu(); -} - break; - - case 53: - - { - if (zconf_endtoken((yyvsp[(1) - (1)].id), T_CHOICE, T_ENDCHOICE)) { - menu_end_menu(); - printd(DEBUG_PARSE, "%s:%d:endchoice\n", zconf_curname(), zconf_lineno()); - } -} - break; - - case 61: - - { - menu_add_prompt(P_PROMPT, (yyvsp[(2) - (4)].string), (yyvsp[(3) - (4)].expr)); - printd(DEBUG_PARSE, "%s:%d:prompt\n", zconf_curname(), zconf_lineno()); -} - break; - - case 62: - - { - if ((yyvsp[(1) - (3)].id)->stype == S_BOOLEAN || (yyvsp[(1) - (3)].id)->stype == S_TRISTATE) { - menu_set_type((yyvsp[(1) - (3)].id)->stype); - printd(DEBUG_PARSE, "%s:%d:type(%u)\n", - zconf_curname(), zconf_lineno(), - (yyvsp[(1) - (3)].id)->stype); - } else - YYERROR; -} - break; - - case 63: - - { - current_entry->sym->flags |= SYMBOL_OPTIONAL; - printd(DEBUG_PARSE, "%s:%d:optional\n", zconf_curname(), zconf_lineno()); -} - break; - - case 64: - - { - if ((yyvsp[(1) - (4)].id)->stype == S_UNKNOWN) { - menu_add_symbol(P_DEFAULT, sym_lookup((yyvsp[(2) - (4)].string), 0), (yyvsp[(3) - (4)].expr)); - printd(DEBUG_PARSE, "%s:%d:default\n", - zconf_curname(), zconf_lineno()); - } else - YYERROR; -} - break; - - case 67: - - { - printd(DEBUG_PARSE, "%s:%d:if\n", zconf_curname(), zconf_lineno()); - menu_add_entry(NULL); - menu_add_dep((yyvsp[(2) - (3)].expr)); - (yyval.menu) = menu_add_menu(); -} - break; - - case 68: - - { - if (zconf_endtoken((yyvsp[(1) - (1)].id), T_IF, T_ENDIF)) { - menu_end_menu(); - printd(DEBUG_PARSE, "%s:%d:endif\n", zconf_curname(), zconf_lineno()); - } -} - break; - - case 74: - - { - menu_add_prompt(P_MENU, (yyvsp[(2) - (3)].string), NULL); -} - break; - - case 75: - - { - menu_add_entry(NULL); - menu_add_prompt(P_MENU, (yyvsp[(2) - (3)].string), NULL); - printd(DEBUG_PARSE, "%s:%d:menu\n", zconf_curname(), zconf_lineno()); -} - break; - - case 76: - - { - (yyval.menu) = menu_add_menu(); -} - break; - - case 77: - - { - if (zconf_endtoken((yyvsp[(1) - (1)].id), T_MENU, T_ENDMENU)) { - menu_end_menu(); - printd(DEBUG_PARSE, "%s:%d:endmenu\n", zconf_curname(), zconf_lineno()); - } -} - break; - - case 83: - - { - printd(DEBUG_PARSE, "%s:%d:source %s\n", zconf_curname(), zconf_lineno(), (yyvsp[(2) - (3)].string)); - zconf_nextfile((yyvsp[(2) - (3)].string)); -} - break; - - case 84: - - { - menu_add_entry(NULL); - menu_add_prompt(P_COMMENT, (yyvsp[(2) - (3)].string), NULL); - printd(DEBUG_PARSE, "%s:%d:comment\n", zconf_curname(), zconf_lineno()); -} - break; - - case 85: - - { - menu_end_entry(); -} - break; - - case 86: - - { - printd(DEBUG_PARSE, "%s:%d:help\n", zconf_curname(), zconf_lineno()); - zconf_starthelp(); -} - break; - - case 87: - - { - current_entry->help = (yyvsp[(2) - (2)].string); -} - break; - - case 92: - - { - menu_add_dep((yyvsp[(3) - (4)].expr)); - printd(DEBUG_PARSE, "%s:%d:depends on\n", zconf_curname(), zconf_lineno()); -} - break; - - case 96: - - { - menu_add_visibility((yyvsp[(2) - (2)].expr)); -} - break; - - case 98: - - { - menu_add_prompt(P_PROMPT, (yyvsp[(1) - (2)].string), (yyvsp[(2) - (2)].expr)); -} - break; - - case 101: - - { (yyval.id) = (yyvsp[(1) - (2)].id); } - break; - - case 102: - - { (yyval.id) = (yyvsp[(1) - (2)].id); } - break; - - case 103: - - { (yyval.id) = (yyvsp[(1) - (2)].id); } - break; - - case 106: - - { (yyval.expr) = NULL; } - break; - - case 107: - - { (yyval.expr) = (yyvsp[(2) - (2)].expr); } - break; - - case 108: - - { (yyval.expr) = expr_alloc_symbol((yyvsp[(1) - (1)].symbol)); } - break; - - case 109: - - { (yyval.expr) = expr_alloc_comp(E_EQUAL, (yyvsp[(1) - (3)].symbol), (yyvsp[(3) - (3)].symbol)); } - break; - - case 110: - - { (yyval.expr) = expr_alloc_comp(E_UNEQUAL, (yyvsp[(1) - (3)].symbol), (yyvsp[(3) - (3)].symbol)); } - break; - - case 111: - - { (yyval.expr) = (yyvsp[(2) - (3)].expr); } - break; - - case 112: - - { (yyval.expr) = expr_alloc_one(E_NOT, (yyvsp[(2) - (2)].expr)); } - break; - - case 113: - - { (yyval.expr) = expr_alloc_two(E_OR, (yyvsp[(1) - (3)].expr), (yyvsp[(3) - (3)].expr)); } - break; - - case 114: - - { (yyval.expr) = expr_alloc_two(E_AND, (yyvsp[(1) - (3)].expr), (yyvsp[(3) - (3)].expr)); } - break; - - case 115: - - { (yyval.symbol) = sym_lookup((yyvsp[(1) - (1)].string), 0); free((yyvsp[(1) - (1)].string)); } - break; - - case 116: - - { (yyval.symbol) = sym_lookup((yyvsp[(1) - (1)].string), SYMBOL_CONST); free((yyvsp[(1) - (1)].string)); } - break; - - case 117: - - { (yyval.string) = NULL; } - break; - - - - default: break; - } - /* User semantic actions sometimes alter yychar, and that requires - that yytoken be updated with the new translation. We take the - approach of translating immediately before every use of yytoken. - One alternative is translating here after every semantic action, - but that translation would be missed if the semantic action invokes - YYABORT, YYACCEPT, or YYERROR immediately after altering yychar or - if it invokes YYBACKUP. In the case of YYABORT or YYACCEPT, an - incorrect destructor might then be invoked immediately. In the - case of YYERROR or YYBACKUP, subsequent parser actions might lead - to an incorrect destructor call or verbose syntax error message - before the lookahead is translated. */ - YY_SYMBOL_PRINT ("-> $$ =", yyr1[yyn], &yyval, &yyloc); - - YYPOPSTACK (yylen); - yylen = 0; - YY_STACK_PRINT (yyss, yyssp); - - *++yyvsp = yyval; - - /* Now `shift' the result of the reduction. Determine what state - that goes to, based on the state we popped back to and the rule - number reduced by. */ - - yyn = yyr1[yyn]; - - yystate = yypgoto[yyn - YYNTOKENS] + *yyssp; - if (0 <= yystate && yystate <= YYLAST && yycheck[yystate] == *yyssp) - yystate = yytable[yystate]; - else - yystate = yydefgoto[yyn - YYNTOKENS]; - - goto yynewstate; - - -/*------------------------------------. -| yyerrlab -- here on detecting error | -`------------------------------------*/ -yyerrlab: - /* Make sure we have latest lookahead translation. See comments at - user semantic actions for why this is necessary. */ - yytoken = yychar == YYEMPTY ? YYEMPTY : YYTRANSLATE (yychar); - - /* If not already recovering from an error, report this error. */ - if (!yyerrstatus) - { - ++yynerrs; -#if ! YYERROR_VERBOSE - yyerror (YY_("syntax error")); -#else -# define YYSYNTAX_ERROR yysyntax_error (&yymsg_alloc, &yymsg, \ - yyssp, yytoken) - { - char const *yymsgp = YY_("syntax error"); - int yysyntax_error_status; - yysyntax_error_status = YYSYNTAX_ERROR; - if (yysyntax_error_status == 0) - yymsgp = yymsg; - else if (yysyntax_error_status == 1) - { - if (yymsg != yymsgbuf) - YYSTACK_FREE (yymsg); - yymsg = (char *) YYSTACK_ALLOC (yymsg_alloc); - if (!yymsg) - { - yymsg = yymsgbuf; - yymsg_alloc = sizeof yymsgbuf; - yysyntax_error_status = 2; - } - else - { - yysyntax_error_status = YYSYNTAX_ERROR; - yymsgp = yymsg; - } - } - yyerror (yymsgp); - if (yysyntax_error_status == 2) - goto yyexhaustedlab; - } -# undef YYSYNTAX_ERROR -#endif - } - - - - if (yyerrstatus == 3) - { - /* If just tried and failed to reuse lookahead token after an - error, discard it. */ - - if (yychar <= YYEOF) - { - /* Return failure if at end of input. */ - if (yychar == YYEOF) - YYABORT; - } - else - { - yydestruct ("Error: discarding", - yytoken, &yylval); - yychar = YYEMPTY; - } - } - - /* Else will try to reuse lookahead token after shifting the error - token. */ - goto yyerrlab1; - - -/*---------------------------------------------------. -| yyerrorlab -- error raised explicitly by YYERROR. | -`---------------------------------------------------*/ -yyerrorlab: - - /* Pacify compilers like GCC when the user code never invokes - YYERROR and the label yyerrorlab therefore never appears in user - code. */ - if (/*CONSTCOND*/ 0) - goto yyerrorlab; - - /* Do not reclaim the symbols of the rule which action triggered - this YYERROR. */ - YYPOPSTACK (yylen); - yylen = 0; - YY_STACK_PRINT (yyss, yyssp); - yystate = *yyssp; - goto yyerrlab1; - - -/*-------------------------------------------------------------. -| yyerrlab1 -- common code for both syntax error and YYERROR. | -`-------------------------------------------------------------*/ -yyerrlab1: - yyerrstatus = 3; /* Each real token shifted decrements this. */ - - for (;;) - { - yyn = yypact[yystate]; - if (!yypact_value_is_default (yyn)) - { - yyn += YYTERROR; - if (0 <= yyn && yyn <= YYLAST && yycheck[yyn] == YYTERROR) - { - yyn = yytable[yyn]; - if (0 < yyn) - break; - } - } - - /* Pop the current state because it cannot handle the error token. */ - if (yyssp == yyss) - YYABORT; - - - yydestruct ("Error: popping", - yystos[yystate], yyvsp); - YYPOPSTACK (1); - yystate = *yyssp; - YY_STACK_PRINT (yyss, yyssp); - } - - *++yyvsp = yylval; - - - /* Shift the error token. */ - YY_SYMBOL_PRINT ("Shifting", yystos[yyn], yyvsp, yylsp); - - yystate = yyn; - goto yynewstate; - - -/*-------------------------------------. -| yyacceptlab -- YYACCEPT comes here. | -`-------------------------------------*/ -yyacceptlab: - yyresult = 0; - goto yyreturn; - -/*-----------------------------------. -| yyabortlab -- YYABORT comes here. | -`-----------------------------------*/ -yyabortlab: - yyresult = 1; - goto yyreturn; - -#if !defined(yyoverflow) || YYERROR_VERBOSE -/*-------------------------------------------------. -| yyexhaustedlab -- memory exhaustion comes here. | -`-------------------------------------------------*/ -yyexhaustedlab: - yyerror (YY_("memory exhausted")); - yyresult = 2; - /* Fall through. */ -#endif - -yyreturn: - if (yychar != YYEMPTY) - { - /* Make sure we have latest lookahead translation. See comments at - user semantic actions for why this is necessary. */ - yytoken = YYTRANSLATE (yychar); - yydestruct ("Cleanup: discarding lookahead", - yytoken, &yylval); - } - /* Do not reclaim the symbols of the rule which action triggered - this YYABORT or YYACCEPT. */ - YYPOPSTACK (yylen); - YY_STACK_PRINT (yyss, yyssp); - while (yyssp != yyss) - { - yydestruct ("Cleanup: popping", - yystos[*yyssp], yyvsp); - YYPOPSTACK (1); - } -#ifndef yyoverflow - if (yyss != yyssa) - YYSTACK_FREE (yyss); -#endif -#if YYERROR_VERBOSE - if (yymsg != yymsgbuf) - YYSTACK_FREE (yymsg); -#endif - /* Make sure YYID is used. */ - return YYID (yyresult); -} - - - - - -void conf_parse(const char *name) -{ - struct symbol *sym; - int i; - - zconf_initscan(name); - - sym_init(); - _menu_init(); - rootmenu.prompt = menu_add_prompt(P_MENU, "Linux Kernel Configuration", NULL); - - if (getenv("ZCONF_DEBUG")) - zconfdebug = 1; - zconfparse(); - if (zconfnerrs) - exit(1); - if (!modules_sym) - modules_sym = sym_find( "n" ); - - rootmenu.prompt->text = _(rootmenu.prompt->text); - rootmenu.prompt->text = sym_expand_string_value(rootmenu.prompt->text); - - menu_finalize(&rootmenu); - for_all_symbols(i, sym) { - if (sym_check_deps(sym)) - zconfnerrs++; - } - if (zconfnerrs) - exit(1); - sym_set_change_count(1); -} - -static const char *zconf_tokenname(int token) -{ - switch (token) { - case T_MENU: return "menu"; - case T_ENDMENU: return "endmenu"; - case T_CHOICE: return "choice"; - case T_ENDCHOICE: return "endchoice"; - case T_IF: return "if"; - case T_ENDIF: return "endif"; - case T_DEPENDS: return "depends"; - case T_VISIBLE: return "visible"; - } - return "<token>"; -} - -static bool zconf_endtoken(const struct kconf_id *id, int starttoken, int endtoken) -{ - if (id->token != endtoken) { - zconf_error("unexpected '%s' within %s block", - kconf_id_strings + id->name, zconf_tokenname(starttoken)); - zconfnerrs++; - return false; - } - if (current_menu->file != current_file) { - zconf_error("'%s' in different file than '%s'", - kconf_id_strings + id->name, zconf_tokenname(starttoken)); - fprintf(stderr, "%s:%d: location of the '%s'\n", - current_menu->file->name, current_menu->lineno, - zconf_tokenname(starttoken)); - zconfnerrs++; - return false; - } - return true; -} - -static void zconfprint(const char *err, ...) -{ - va_list ap; - - fprintf(stderr, "%s:%d: ", zconf_curname(), zconf_lineno()); - va_start(ap, err); - vfprintf(stderr, err, ap); - va_end(ap); - fprintf(stderr, "\n"); -} - -static void zconf_error(const char *err, ...) -{ - va_list ap; - - zconfnerrs++; - fprintf(stderr, "%s:%d: ", zconf_curname(), zconf_lineno()); - va_start(ap, err); - vfprintf(stderr, err, ap); - va_end(ap); - fprintf(stderr, "\n"); -} - -static void zconferror(const char *err) -{ - fprintf(stderr, "%s:%d: %s\n", zconf_curname(), zconf_lineno() + 1, err); -} - -static void print_quoted_string(FILE *out, const char *str) -{ - const char *p; - int len; - - putc('"', out); - while ((p = strchr(str, '"'))) { - len = p - str; - if (len) - fprintf(out, "%.*s", len, str); - fputs("\\\"", out); - str = p + 1; - } - fputs(str, out); - putc('"', out); -} - -static void print_symbol(FILE *out, struct menu *menu) -{ - struct symbol *sym = menu->sym; - struct property *prop; - - if (sym_is_choice(sym)) - fprintf(out, "\nchoice\n"); - else - fprintf(out, "\nconfig %s\n", sym->name); - switch (sym->type) { - case S_BOOLEAN: - fputs(" boolean\n", out); - break; - case S_TRISTATE: - fputs(" tristate\n", out); - break; - case S_STRING: - fputs(" string\n", out); - break; - case S_INT: - fputs(" integer\n", out); - break; - case S_HEX: - fputs(" hex\n", out); - break; - default: - fputs(" ???\n", out); - break; - } - for (prop = sym->prop; prop; prop = prop->next) { - if (prop->menu != menu) - continue; - switch (prop->type) { - case P_PROMPT: - fputs(" prompt ", out); - print_quoted_string(out, prop->text); - if (!expr_is_yes(prop->visible.expr)) { - fputs(" if ", out); - expr_fprint(prop->visible.expr, out); - } - fputc('\n', out); - break; - case P_DEFAULT: - fputs( " default ", out); - expr_fprint(prop->expr, out); - if (!expr_is_yes(prop->visible.expr)) { - fputs(" if ", out); - expr_fprint(prop->visible.expr, out); - } - fputc('\n', out); - break; - case P_CHOICE: - fputs(" #choice value\n", out); - break; - case P_SELECT: - fputs( " select ", out); - expr_fprint(prop->expr, out); - fputc('\n', out); - break; - case P_RANGE: - fputs( " range ", out); - expr_fprint(prop->expr, out); - fputc('\n', out); - break; - case P_MENU: - fputs( " menu ", out); - print_quoted_string(out, prop->text); - fputc('\n', out); - break; - default: - fprintf(out, " unknown prop %d!\n", prop->type); - break; - } - } - if (menu->help) { - int len = strlen(menu->help); - while (menu->help[--len] == '\n') - menu->help[len] = 0; - fprintf(out, " help\n%s\n", menu->help); - } -} - -void zconfdump(FILE *out) -{ - struct property *prop; - struct symbol *sym; - struct menu *menu; - - menu = rootmenu.list; - while (menu) { - if ((sym = menu->sym)) - print_symbol(out, menu); - else if ((prop = menu->prompt)) { - switch (prop->type) { - case P_COMMENT: - fputs("\ncomment ", out); - print_quoted_string(out, prop->text); - fputs("\n", out); - break; - case P_MENU: - fputs("\nmenu ", out); - print_quoted_string(out, prop->text); - fputs("\n", out); - break; - default: - ; - } - if (!expr_is_yes(prop->visible.expr)) { - fputs(" depends ", out); - expr_fprint(prop->visible.expr, out); - fputc('\n', out); - } - } - - if (menu->list) - menu = menu->list; - else if (menu->next) - menu = menu->next; - else while ((menu = menu->parent)) { - if (menu->prompt && menu->prompt->type == P_MENU) - fputs("\nendmenu\n", out); - if (menu->next) { - menu = menu->next; - break; - } - } - } -} - -#include "zconf.lex.c" -#include "util.c" -#include "confdata.c" -#include "expr.c" -#include "symbol.c" -#include "menu.c" - diff --git a/payloads/external/SeaBIOS/scripts/kconfig/zconf.y b/payloads/external/SeaBIOS/scripts/kconfig/zconf.y deleted file mode 100644 index 0f683cfa..00000000 --- a/payloads/external/SeaBIOS/scripts/kconfig/zconf.y +++ /dev/null @@ -1,733 +0,0 @@ -%{ -/* - * Copyright (C) 2002 Roman Zippel <zippel@linux-m68k.org> - * Released under the terms of the GNU GPL v2.0. - */ - -#include <ctype.h> -#include <stdarg.h> -#include <stdio.h> -#include <stdlib.h> -#include <string.h> -#include <stdbool.h> - -#include "lkc.h" - -#define printd(mask, fmt...) if (cdebug & (mask)) printf(fmt) - -#define PRINTD 0x0001 -#define DEBUG_PARSE 0x0002 - -int cdebug = PRINTD; - -extern int zconflex(void); -static void zconfprint(const char *err, ...); -static void zconf_error(const char *err, ...); -static void zconferror(const char *err); -static bool zconf_endtoken(const struct kconf_id *id, int starttoken, int endtoken); - -struct symbol *symbol_hash[SYMBOL_HASHSIZE]; - -static struct menu *current_menu, *current_entry; - -%} -%expect 30 - -%union -{ - char *string; - struct file *file; - struct symbol *symbol; - struct expr *expr; - struct menu *menu; - const struct kconf_id *id; -} - -%token <id>T_MAINMENU -%token <id>T_MENU -%token <id>T_ENDMENU -%token <id>T_SOURCE -%token <id>T_CHOICE -%token <id>T_ENDCHOICE -%token <id>T_COMMENT -%token <id>T_CONFIG -%token <id>T_MENUCONFIG -%token <id>T_HELP -%token <string> T_HELPTEXT -%token <id>T_IF -%token <id>T_ENDIF -%token <id>T_DEPENDS -%token <id>T_OPTIONAL -%token <id>T_PROMPT -%token <id>T_TYPE -%token <id>T_DEFAULT -%token <id>T_SELECT -%token <id>T_RANGE -%token <id>T_VISIBLE -%token <id>T_OPTION -%token <id>T_ON -%token <string> T_WORD -%token <string> T_WORD_QUOTE -%token T_UNEQUAL -%token T_CLOSE_PAREN -%token T_OPEN_PAREN -%token T_EOL - -%left T_OR -%left T_AND -%left T_EQUAL T_UNEQUAL -%nonassoc T_NOT - -%type <string> prompt -%type <symbol> symbol -%type <expr> expr -%type <expr> if_expr -%type <id> end -%type <id> option_name -%type <menu> if_entry menu_entry choice_entry -%type <string> symbol_option_arg word_opt - -%destructor { - fprintf(stderr, "%s:%d: missing end statement for this entry\n", - $$->file->name, $$->lineno); - if (current_menu == $$) - menu_end_menu(); -} if_entry menu_entry choice_entry - -%{ -/* Include zconf.hash.c here so it can see the token constants. */ -#include "zconf.hash.c" -%} - -%% -input: nl start | start; - -start: mainmenu_stmt stmt_list | stmt_list; - -stmt_list: - /* empty */ - | stmt_list common_stmt - | stmt_list choice_stmt - | stmt_list menu_stmt - | stmt_list end { zconf_error("unexpected end statement"); } - | stmt_list T_WORD error T_EOL { zconf_error("unknown statement \"%s\"", $2); } - | stmt_list option_name error T_EOL -{ - zconf_error("unexpected option \"%s\"", kconf_id_strings + $2->name); -} - | stmt_list error T_EOL { zconf_error("invalid statement"); } -; - -option_name: - T_DEPENDS | T_PROMPT | T_TYPE | T_SELECT | T_OPTIONAL | T_RANGE | T_DEFAULT | T_VISIBLE -; - -common_stmt: - T_EOL - | if_stmt - | comment_stmt - | config_stmt - | menuconfig_stmt - | source_stmt -; - -option_error: - T_WORD error T_EOL { zconf_error("unknown option \"%s\"", $1); } - | error T_EOL { zconf_error("invalid option"); } -; - - -/* config/menuconfig entry */ - -config_entry_start: T_CONFIG T_WORD T_EOL -{ - struct symbol *sym = sym_lookup($2, 0); - sym->flags |= SYMBOL_OPTIONAL; - menu_add_entry(sym); - printd(DEBUG_PARSE, "%s:%d:config %s\n", zconf_curname(), zconf_lineno(), $2); -}; - -config_stmt: config_entry_start config_option_list -{ - menu_end_entry(); - printd(DEBUG_PARSE, "%s:%d:endconfig\n", zconf_curname(), zconf_lineno()); -}; - -menuconfig_entry_start: T_MENUCONFIG T_WORD T_EOL -{ - struct symbol *sym = sym_lookup($2, 0); - sym->flags |= SYMBOL_OPTIONAL; - menu_add_entry(sym); - printd(DEBUG_PARSE, "%s:%d:menuconfig %s\n", zconf_curname(), zconf_lineno(), $2); -}; - -menuconfig_stmt: menuconfig_entry_start config_option_list -{ - if (current_entry->prompt) - current_entry->prompt->type = P_MENU; - else - zconfprint("warning: menuconfig statement without prompt"); - menu_end_entry(); - printd(DEBUG_PARSE, "%s:%d:endconfig\n", zconf_curname(), zconf_lineno()); -}; - -config_option_list: - /* empty */ - | config_option_list config_option - | config_option_list symbol_option - | config_option_list depends - | config_option_list help - | config_option_list option_error - | config_option_list T_EOL -; - -config_option: T_TYPE prompt_stmt_opt T_EOL -{ - menu_set_type($1->stype); - printd(DEBUG_PARSE, "%s:%d:type(%u)\n", - zconf_curname(), zconf_lineno(), - $1->stype); -}; - -config_option: T_PROMPT prompt if_expr T_EOL -{ - menu_add_prompt(P_PROMPT, $2, $3); - printd(DEBUG_PARSE, "%s:%d:prompt\n", zconf_curname(), zconf_lineno()); -}; - -config_option: T_DEFAULT expr if_expr T_EOL -{ - menu_add_expr(P_DEFAULT, $2, $3); - if ($1->stype != S_UNKNOWN) - menu_set_type($1->stype); - printd(DEBUG_PARSE, "%s:%d:default(%u)\n", - zconf_curname(), zconf_lineno(), - $1->stype); -}; - -config_option: T_SELECT T_WORD if_expr T_EOL -{ - menu_add_symbol(P_SELECT, sym_lookup($2, 0), $3); - printd(DEBUG_PARSE, "%s:%d:select\n", zconf_curname(), zconf_lineno()); -}; - -config_option: T_RANGE symbol symbol if_expr T_EOL -{ - menu_add_expr(P_RANGE, expr_alloc_comp(E_RANGE,$2, $3), $4); - printd(DEBUG_PARSE, "%s:%d:range\n", zconf_curname(), zconf_lineno()); -}; - -symbol_option: T_OPTION symbol_option_list T_EOL -; - -symbol_option_list: - /* empty */ - | symbol_option_list T_WORD symbol_option_arg -{ - const struct kconf_id *id = kconf_id_lookup($2, strlen($2)); - if (id && id->flags & TF_OPTION) - menu_add_option(id->token, $3); - else - zconfprint("warning: ignoring unknown option %s", $2); - free($2); -}; - -symbol_option_arg: - /* empty */ { $$ = NULL; } - | T_EQUAL prompt { $$ = $2; } -; - -/* choice entry */ - -choice: T_CHOICE word_opt T_EOL -{ - struct symbol *sym = sym_lookup($2, SYMBOL_CHOICE); - sym->flags |= SYMBOL_AUTO; - menu_add_entry(sym); - menu_add_expr(P_CHOICE, NULL, NULL); - printd(DEBUG_PARSE, "%s:%d:choice\n", zconf_curname(), zconf_lineno()); -}; - -choice_entry: choice choice_option_list -{ - $$ = menu_add_menu(); -}; - -choice_end: end -{ - if (zconf_endtoken($1, T_CHOICE, T_ENDCHOICE)) { - menu_end_menu(); - printd(DEBUG_PARSE, "%s:%d:endchoice\n", zconf_curname(), zconf_lineno()); - } -}; - -choice_stmt: choice_entry choice_block choice_end -; - -choice_option_list: - /* empty */ - | choice_option_list choice_option - | choice_option_list depends - | choice_option_list help - | choice_option_list T_EOL - | choice_option_list option_error -; - -choice_option: T_PROMPT prompt if_expr T_EOL -{ - menu_add_prompt(P_PROMPT, $2, $3); - printd(DEBUG_PARSE, "%s:%d:prompt\n", zconf_curname(), zconf_lineno()); -}; - -choice_option: T_TYPE prompt_stmt_opt T_EOL -{ - if ($1->stype == S_BOOLEAN || $1->stype == S_TRISTATE) { - menu_set_type($1->stype); - printd(DEBUG_PARSE, "%s:%d:type(%u)\n", - zconf_curname(), zconf_lineno(), - $1->stype); - } else - YYERROR; -}; - -choice_option: T_OPTIONAL T_EOL -{ - current_entry->sym->flags |= SYMBOL_OPTIONAL; - printd(DEBUG_PARSE, "%s:%d:optional\n", zconf_curname(), zconf_lineno()); -}; - -choice_option: T_DEFAULT T_WORD if_expr T_EOL -{ - if ($1->stype == S_UNKNOWN) { - menu_add_symbol(P_DEFAULT, sym_lookup($2, 0), $3); - printd(DEBUG_PARSE, "%s:%d:default\n", - zconf_curname(), zconf_lineno()); - } else - YYERROR; -}; - -choice_block: - /* empty */ - | choice_block common_stmt -; - -/* if entry */ - -if_entry: T_IF expr nl -{ - printd(DEBUG_PARSE, "%s:%d:if\n", zconf_curname(), zconf_lineno()); - menu_add_entry(NULL); - menu_add_dep($2); - $$ = menu_add_menu(); -}; - -if_end: end -{ - if (zconf_endtoken($1, T_IF, T_ENDIF)) { - menu_end_menu(); - printd(DEBUG_PARSE, "%s:%d:endif\n", zconf_curname(), zconf_lineno()); - } -}; - -if_stmt: if_entry if_block if_end -; - -if_block: - /* empty */ - | if_block common_stmt - | if_block menu_stmt - | if_block choice_stmt -; - -/* mainmenu entry */ - -mainmenu_stmt: T_MAINMENU prompt nl -{ - menu_add_prompt(P_MENU, $2, NULL); -}; - -/* menu entry */ - -menu: T_MENU prompt T_EOL -{ - menu_add_entry(NULL); - menu_add_prompt(P_MENU, $2, NULL); - printd(DEBUG_PARSE, "%s:%d:menu\n", zconf_curname(), zconf_lineno()); -}; - -menu_entry: menu visibility_list depends_list -{ - $$ = menu_add_menu(); -}; - -menu_end: end -{ - if (zconf_endtoken($1, T_MENU, T_ENDMENU)) { - menu_end_menu(); - printd(DEBUG_PARSE, "%s:%d:endmenu\n", zconf_curname(), zconf_lineno()); - } -}; - -menu_stmt: menu_entry menu_block menu_end -; - -menu_block: - /* empty */ - | menu_block common_stmt - | menu_block menu_stmt - | menu_block choice_stmt -; - -source_stmt: T_SOURCE prompt T_EOL -{ - printd(DEBUG_PARSE, "%s:%d:source %s\n", zconf_curname(), zconf_lineno(), $2); - zconf_nextfile($2); -}; - -/* comment entry */ - -comment: T_COMMENT prompt T_EOL -{ - menu_add_entry(NULL); - menu_add_prompt(P_COMMENT, $2, NULL); - printd(DEBUG_PARSE, "%s:%d:comment\n", zconf_curname(), zconf_lineno()); -}; - -comment_stmt: comment depends_list -{ - menu_end_entry(); -}; - -/* help option */ - -help_start: T_HELP T_EOL -{ - printd(DEBUG_PARSE, "%s:%d:help\n", zconf_curname(), zconf_lineno()); - zconf_starthelp(); -}; - -help: help_start T_HELPTEXT -{ - current_entry->help = $2; -}; - -/* depends option */ - -depends_list: - /* empty */ - | depends_list depends - | depends_list T_EOL - | depends_list option_error -; - -depends: T_DEPENDS T_ON expr T_EOL -{ - menu_add_dep($3); - printd(DEBUG_PARSE, "%s:%d:depends on\n", zconf_curname(), zconf_lineno()); -}; - -/* visibility option */ - -visibility_list: - /* empty */ - | visibility_list visible - | visibility_list T_EOL -; - -visible: T_VISIBLE if_expr -{ - menu_add_visibility($2); -}; - -/* prompt statement */ - -prompt_stmt_opt: - /* empty */ - | prompt if_expr -{ - menu_add_prompt(P_PROMPT, $1, $2); -}; - -prompt: T_WORD - | T_WORD_QUOTE -; - -end: T_ENDMENU T_EOL { $$ = $1; } - | T_ENDCHOICE T_EOL { $$ = $1; } - | T_ENDIF T_EOL { $$ = $1; } -; - -nl: - T_EOL - | nl T_EOL -; - -if_expr: /* empty */ { $$ = NULL; } - | T_IF expr { $$ = $2; } -; - -expr: symbol { $$ = expr_alloc_symbol($1); } - | symbol T_EQUAL symbol { $$ = expr_alloc_comp(E_EQUAL, $1, $3); } - | symbol T_UNEQUAL symbol { $$ = expr_alloc_comp(E_UNEQUAL, $1, $3); } - | T_OPEN_PAREN expr T_CLOSE_PAREN { $$ = $2; } - | T_NOT expr { $$ = expr_alloc_one(E_NOT, $2); } - | expr T_OR expr { $$ = expr_alloc_two(E_OR, $1, $3); } - | expr T_AND expr { $$ = expr_alloc_two(E_AND, $1, $3); } -; - -symbol: T_WORD { $$ = sym_lookup($1, 0); free($1); } - | T_WORD_QUOTE { $$ = sym_lookup($1, SYMBOL_CONST); free($1); } -; - -word_opt: /* empty */ { $$ = NULL; } - | T_WORD - -%% - -void conf_parse(const char *name) -{ - struct symbol *sym; - int i; - - zconf_initscan(name); - - sym_init(); - _menu_init(); - rootmenu.prompt = menu_add_prompt(P_MENU, "Linux Kernel Configuration", NULL); - - if (getenv("ZCONF_DEBUG")) - zconfdebug = 1; - zconfparse(); - if (zconfnerrs) - exit(1); - if (!modules_sym) - modules_sym = sym_find( "n" ); - - rootmenu.prompt->text = _(rootmenu.prompt->text); - rootmenu.prompt->text = sym_expand_string_value(rootmenu.prompt->text); - - menu_finalize(&rootmenu); - for_all_symbols(i, sym) { - if (sym_check_deps(sym)) - zconfnerrs++; - } - if (zconfnerrs) - exit(1); - sym_set_change_count(1); -} - -static const char *zconf_tokenname(int token) -{ - switch (token) { - case T_MENU: return "menu"; - case T_ENDMENU: return "endmenu"; - case T_CHOICE: return "choice"; - case T_ENDCHOICE: return "endchoice"; - case T_IF: return "if"; - case T_ENDIF: return "endif"; - case T_DEPENDS: return "depends"; - case T_VISIBLE: return "visible"; - } - return "<token>"; -} - -static bool zconf_endtoken(const struct kconf_id *id, int starttoken, int endtoken) -{ - if (id->token != endtoken) { - zconf_error("unexpected '%s' within %s block", - kconf_id_strings + id->name, zconf_tokenname(starttoken)); - zconfnerrs++; - return false; - } - if (current_menu->file != current_file) { - zconf_error("'%s' in different file than '%s'", - kconf_id_strings + id->name, zconf_tokenname(starttoken)); - fprintf(stderr, "%s:%d: location of the '%s'\n", - current_menu->file->name, current_menu->lineno, - zconf_tokenname(starttoken)); - zconfnerrs++; - return false; - } - return true; -} - -static void zconfprint(const char *err, ...) -{ - va_list ap; - - fprintf(stderr, "%s:%d: ", zconf_curname(), zconf_lineno()); - va_start(ap, err); - vfprintf(stderr, err, ap); - va_end(ap); - fprintf(stderr, "\n"); -} - -static void zconf_error(const char *err, ...) -{ - va_list ap; - - zconfnerrs++; - fprintf(stderr, "%s:%d: ", zconf_curname(), zconf_lineno()); - va_start(ap, err); - vfprintf(stderr, err, ap); - va_end(ap); - fprintf(stderr, "\n"); -} - -static void zconferror(const char *err) -{ - fprintf(stderr, "%s:%d: %s\n", zconf_curname(), zconf_lineno() + 1, err); -} - -static void print_quoted_string(FILE *out, const char *str) -{ - const char *p; - int len; - - putc('"', out); - while ((p = strchr(str, '"'))) { - len = p - str; - if (len) - fprintf(out, "%.*s", len, str); - fputs("\\\"", out); - str = p + 1; - } - fputs(str, out); - putc('"', out); -} - -static void print_symbol(FILE *out, struct menu *menu) -{ - struct symbol *sym = menu->sym; - struct property *prop; - - if (sym_is_choice(sym)) - fprintf(out, "\nchoice\n"); - else - fprintf(out, "\nconfig %s\n", sym->name); - switch (sym->type) { - case S_BOOLEAN: - fputs(" boolean\n", out); - break; - case S_TRISTATE: - fputs(" tristate\n", out); - break; - case S_STRING: - fputs(" string\n", out); - break; - case S_INT: - fputs(" integer\n", out); - break; - case S_HEX: - fputs(" hex\n", out); - break; - default: - fputs(" ???\n", out); - break; - } - for (prop = sym->prop; prop; prop = prop->next) { - if (prop->menu != menu) - continue; - switch (prop->type) { - case P_PROMPT: - fputs(" prompt ", out); - print_quoted_string(out, prop->text); - if (!expr_is_yes(prop->visible.expr)) { - fputs(" if ", out); - expr_fprint(prop->visible.expr, out); - } - fputc('\n', out); - break; - case P_DEFAULT: - fputs( " default ", out); - expr_fprint(prop->expr, out); - if (!expr_is_yes(prop->visible.expr)) { - fputs(" if ", out); - expr_fprint(prop->visible.expr, out); - } - fputc('\n', out); - break; - case P_CHOICE: - fputs(" #choice value\n", out); - break; - case P_SELECT: - fputs( " select ", out); - expr_fprint(prop->expr, out); - fputc('\n', out); - break; - case P_RANGE: - fputs( " range ", out); - expr_fprint(prop->expr, out); - fputc('\n', out); - break; - case P_MENU: - fputs( " menu ", out); - print_quoted_string(out, prop->text); - fputc('\n', out); - break; - default: - fprintf(out, " unknown prop %d!\n", prop->type); - break; - } - } - if (menu->help) { - int len = strlen(menu->help); - while (menu->help[--len] == '\n') - menu->help[len] = 0; - fprintf(out, " help\n%s\n", menu->help); - } -} - -void zconfdump(FILE *out) -{ - struct property *prop; - struct symbol *sym; - struct menu *menu; - - menu = rootmenu.list; - while (menu) { - if ((sym = menu->sym)) - print_symbol(out, menu); - else if ((prop = menu->prompt)) { - switch (prop->type) { - case P_COMMENT: - fputs("\ncomment ", out); - print_quoted_string(out, prop->text); - fputs("\n", out); - break; - case P_MENU: - fputs("\nmenu ", out); - print_quoted_string(out, prop->text); - fputs("\n", out); - break; - default: - ; - } - if (!expr_is_yes(prop->visible.expr)) { - fputs(" depends ", out); - expr_fprint(prop->visible.expr, out); - fputc('\n', out); - } - } - - if (menu->list) - menu = menu->list; - else if (menu->next) - menu = menu->next; - else while ((menu = menu->parent)) { - if (menu->prompt && menu->prompt->type == P_MENU) - fputs("\nendmenu\n", out); - if (menu->next) { - menu = menu->next; - break; - } - } - } -} - -#include "zconf.lex.c" -#include "util.c" -#include "confdata.c" -#include "expr.c" -#include "symbol.c" -#include "menu.c" diff --git a/payloads/external/SeaBIOS/scripts/layoutrom.py b/payloads/external/SeaBIOS/scripts/layoutrom.py deleted file mode 100755 index abebf021..00000000 --- a/payloads/external/SeaBIOS/scripts/layoutrom.py +++ /dev/null @@ -1,709 +0,0 @@ -#!/usr/bin/env python -# Script to analyze code and arrange ld sections. -# -# Copyright (C) 2008-2014 Kevin O'Connor <kevin@koconnor.net> -# -# This file may be distributed under the terms of the GNU GPLv3 license. - -import operator -import sys - -# LD script headers/trailers -COMMONHEADER = """ -/* DO NOT EDIT! This is an autogenerated file. See scripts/layoutrom.py. */ -OUTPUT_FORMAT("elf32-i386") -OUTPUT_ARCH("i386") -SECTIONS -{ -""" -COMMONTRAILER = """ - - /* Discard regular data sections to force a link error if - * code attempts to access data not marked with VAR16 (or other - * appropriate macro) - */ - /DISCARD/ : { - *(.text*) *(.data*) *(.bss*) *(.rodata*) - *(COMMON) *(.discard*) *(.eh_frame) *(.note*) - } -} -""" - - -###################################################################### -# Determine section locations -###################################################################### - -# Align 'pos' up to 'alignbytes' offset -def alignpos(pos, alignbytes): - mask = alignbytes - 1 - return (pos + mask) & ~mask - -# Align 'pos' down to 'alignbytes' offset -def aligndown(pos, alignbytes): - mask = alignbytes - 1 - return pos & ~mask - -# Determine the final addresses for a list of sections that end at an -# address. -def setSectionsStart(sections, endaddr, minalign=1, segoffset=0): - totspace = 0 - for section in sections: - minalign = max(minalign, section.align) - totspace = alignpos(totspace, section.align) + section.size - startaddr = int((endaddr - totspace) / minalign) * minalign - curaddr = startaddr - for section in sections: - curaddr = alignpos(curaddr, section.align) - section.finalloc = curaddr - section.finalsegloc = curaddr - segoffset - curaddr += section.size - return startaddr, minalign - -# The 16bit code can't exceed 64K of space. -BUILD_BIOS_ADDR = 0xf0000 -BUILD_BIOS_SIZE = 0x10000 -BUILD_ROM_START = 0xc0000 -BUILD_LOWRAM_END = 0xa0000 -# Space to reserve in f-segment for dynamic allocations -BUILD_MIN_BIOSTABLE = 2048 - -# Layout the 16bit code. This ensures sections with fixed offset -# requirements are placed in the correct location. It also places the -# 16bit code as high as possible in the f-segment. -def fitSections(sections, fillsections): - # fixedsections = [(addr, section), ...] - fixedsections = [] - for section in sections: - if section.name.startswith('.fixedaddr.'): - addr = int(section.name[11:], 16) - section.finalloc = addr + BUILD_BIOS_ADDR - section.finalsegloc = addr - fixedsections.append((addr, section)) - if section.align != 1: - print("Error: Fixed section %s has non-zero alignment (%d)" % ( - section.name, section.align)) - sys.exit(1) - fixedsections.sort(key=operator.itemgetter(0)) - firstfixed = fixedsections[0][0] - - # Find freespace in fixed address area - # fixedAddr = [(freespace, section), ...] - fixedAddr = [] - for i in range(len(fixedsections)): - fixedsectioninfo = fixedsections[i] - addr, section = fixedsectioninfo - if i == len(fixedsections) - 1: - nextaddr = BUILD_BIOS_SIZE - else: - nextaddr = fixedsections[i+1][0] - avail = nextaddr - addr - section.size - fixedAddr.append((avail, section)) - fixedAddr.sort(key=operator.itemgetter(0)) - - # Attempt to fit other sections into fixed area - canrelocate = [(section.size, section.align, section.name, section) - for section in fillsections] - canrelocate.sort() - canrelocate = [section for size, align, name, section in canrelocate] - totalused = 0 - for freespace, fixedsection in fixedAddr: - addpos = fixedsection.finalsegloc + fixedsection.size - totalused += fixedsection.size - nextfixedaddr = addpos + freespace -# print("Filling section %x uses %d, next=%x, available=%d" % ( -# fixedsection.finalloc, fixedsection.size, nextfixedaddr, freespace)) - while 1: - canfit = None - for fitsection in canrelocate: - if addpos + fitsection.size > nextfixedaddr: - # Can't fit and nothing else will fit. - break - fitnextaddr = alignpos(addpos, fitsection.align) + fitsection.size -# print("Test %s - %x vs %x" % ( -# fitsection.name, fitnextaddr, nextfixedaddr)) - if fitnextaddr > nextfixedaddr: - # This item can't fit. - continue - canfit = (fitnextaddr, fitsection) - if canfit is None: - break - # Found a section that can fit. - fitnextaddr, fitsection = canfit - canrelocate.remove(fitsection) - fitsection.finalloc = addpos + BUILD_BIOS_ADDR - fitsection.finalsegloc = addpos - addpos = fitnextaddr - totalused += fitsection.size -# print(" Adding %s (size %d align %d) pos=%x avail=%d" % ( -# fitsection[2], fitsection[0], fitsection[1] -# , fitnextaddr, nextfixedaddr - fitnextaddr)) - - # Report stats - total = BUILD_BIOS_SIZE-firstfixed - slack = total - totalused - print ("Fixed space: 0x%x-0x%x total: %d slack: %d" - " Percent slack: %.1f%%" % ( - firstfixed, BUILD_BIOS_SIZE, total, slack, - (float(slack) / total) * 100.0)) - - return firstfixed + BUILD_BIOS_ADDR - -# Return the subset of sections with a given category -def getSectionsCategory(sections, category): - return [section for section in sections if section.category == category] - -# Return the subset of sections with a given fileid -def getSectionsFileid(sections, fileid): - return [section for section in sections if section.fileid == fileid] - -# Return the subset of sections with a given name prefix -def getSectionsPrefix(sections, prefix): - return [section for section in sections - if section.name.startswith(prefix)] - -# The sections (and associated information) to be placed in output rom -class LayoutInfo: - sections = None - config = None - genreloc = None - sec32init_start = sec32init_end = sec32init_align = None - sec32low_start = sec32low_end = None - zonelow_base = final_sec32low_start = None - zonefseg_start = zonefseg_end = None - final_readonly_start = None - varlowsyms = entrysym = None - -# Determine final memory addresses for sections -def doLayout(sections, config, genreloc): - li = LayoutInfo() - li.config = config - li.sections = sections - li.genreloc = genreloc - # Determine 16bit positions - sections16 = getSectionsCategory(sections, '16') - textsections = getSectionsPrefix(sections16, '.text.') - rodatasections = getSectionsPrefix(sections16, '.rodata') - datasections = getSectionsPrefix(sections16, '.data16.') - fixedsections = getSectionsCategory(sections, 'fixed') - - firstfixed = fitSections(fixedsections, textsections) - remsections = [s for s in textsections+rodatasections+datasections - if s.finalloc is None] - sec16_start, sec16_align = setSectionsStart( - remsections, firstfixed, segoffset=BUILD_BIOS_ADDR) - - # Determine 32seg positions - sections32seg = getSectionsCategory(sections, '32seg') - textsections = getSectionsPrefix(sections32seg, '.text.') - rodatasections = getSectionsPrefix(sections32seg, '.rodata') - datasections = getSectionsPrefix(sections32seg, '.data32seg.') - - sec32seg_start, sec32seg_align = setSectionsStart( - textsections + rodatasections + datasections, sec16_start - , segoffset=BUILD_BIOS_ADDR) - - # Determine 32bit "fseg memory" data positions - sections32textfseg = getSectionsCategory(sections, '32textfseg') - sec32textfseg_start, sec32textfseg_align = setSectionsStart( - sections32textfseg, sec32seg_start, 16) - - sections32fseg = getSectionsCategory(sections, '32fseg') - sec32fseg_start, sec32fseg_align = setSectionsStart( - sections32fseg, sec32textfseg_start, 16 - , segoffset=BUILD_BIOS_ADDR) - - # Determine 32flat runtime positions - sections32flat = getSectionsCategory(sections, '32flat') - textsections = getSectionsPrefix(sections32flat, '.text.') - rodatasections = getSectionsPrefix(sections32flat, '.rodata') - datasections = getSectionsPrefix(sections32flat, '.data.') - bsssections = getSectionsPrefix(sections32flat, '.bss.') - - sec32flat_start, sec32flat_align = setSectionsStart( - textsections + rodatasections + datasections + bsssections - , sec32fseg_start, 16) - - # Determine 32flat init positions - sections32init = getSectionsCategory(sections, '32init') - init32_textsections = getSectionsPrefix(sections32init, '.text.') - init32_rodatasections = getSectionsPrefix(sections32init, '.rodata') - init32_datasections = getSectionsPrefix(sections32init, '.data.') - init32_bsssections = getSectionsPrefix(sections32init, '.bss.') - - sec32init_start, sec32init_align = setSectionsStart( - init32_textsections + init32_rodatasections - + init32_datasections + init32_bsssections - , sec32flat_start, 16) - - # Determine location of ZoneFSeg memory. - zonefseg_end = sec32flat_start - if not genreloc: - zonefseg_end = sec32init_start - zonefseg_start = BUILD_BIOS_ADDR - if zonefseg_start + BUILD_MIN_BIOSTABLE > zonefseg_end: - # Not enough ZoneFSeg space - force a minimum space. - zonefseg_end = sec32fseg_start - zonefseg_start = zonefseg_end - BUILD_MIN_BIOSTABLE - sec32flat_start, sec32flat_align = setSectionsStart( - textsections + rodatasections + datasections + bsssections - , zonefseg_start, 16) - sec32init_start, sec32init_align = setSectionsStart( - init32_textsections + init32_rodatasections - + init32_datasections + init32_bsssections - , sec32flat_start, 16) - li.sec32init_start = sec32init_start - li.sec32init_end = sec32flat_start - li.sec32init_align = sec32init_align - final_readonly_start = min(BUILD_BIOS_ADDR, sec32flat_start) - if not genreloc: - final_readonly_start = min(BUILD_BIOS_ADDR, sec32init_start) - li.zonefseg_start = zonefseg_start - li.zonefseg_end = zonefseg_end - li.final_readonly_start = final_readonly_start - - # Determine "low memory" data positions - sections32low = getSectionsCategory(sections, '32low') - sec32low_end = sec32init_start - if config.get('CONFIG_MALLOC_UPPERMEMORY'): - final_sec32low_end = final_readonly_start - zonelow_base = final_sec32low_end - 64*1024 - zonelow_base = max(BUILD_ROM_START, alignpos(zonelow_base, 2*1024)) - else: - final_sec32low_end = BUILD_LOWRAM_END - zonelow_base = final_sec32low_end - 64*1024 - relocdelta = final_sec32low_end - sec32low_end - li.sec32low_start, sec32low_align = setSectionsStart( - sections32low, sec32low_end, 16 - , segoffset=zonelow_base - relocdelta) - li.sec32low_end = sec32low_end - li.zonelow_base = zonelow_base - li.final_sec32low_start = li.sec32low_start + relocdelta - - # Print statistics - size16 = BUILD_BIOS_ADDR + BUILD_BIOS_SIZE - sec16_start - size32seg = sec16_start - sec32seg_start - size32textfseg = sec32seg_start - sec32textfseg_start - size32fseg = sec32textfseg_start - sec32fseg_start - size32flat = sec32fseg_start - sec32flat_start - size32init = sec32flat_start - sec32init_start - sizelow = li.sec32low_end - li.sec32low_start - print("16bit size: %d" % size16) - print("32bit segmented size: %d" % size32seg) - print("32bit flat size: %d" % (size32flat + size32textfseg)) - print("32bit flat init size: %d" % size32init) - print("Lowmem size: %d" % sizelow) - print("f-segment var size: %d" % size32fseg) - return li - - -###################################################################### -# Linker script output -###################################################################### - -# Write LD script includes for the given cross references -def outXRefs(sections, useseg=0, exportsyms=[], forcedelta=0): - xrefs = dict([(symbol.name, symbol) for symbol in exportsyms]) - out = "" - for section in sections: - for reloc in section.relocs: - symbol = reloc.symbol - if (symbol.section is not None - and (symbol.section.fileid != section.fileid - or symbol.name != reloc.symbolname)): - xrefs[reloc.symbolname] = symbol - for symbolname, symbol in xrefs.items(): - loc = symbol.section.finalloc - if useseg: - loc = symbol.section.finalsegloc - out += "%s = 0x%x ;\n" % (symbolname, loc + forcedelta + symbol.offset) - return out - -# Write LD script includes for the given sections -def outSections(sections, useseg=0): - out = "" - for section in sections: - loc = section.finalloc - if useseg: - loc = section.finalsegloc - out += "%s 0x%x : { *(%s) }\n" % (section.name, loc, section.name) - return out - -# Write LD script includes for the given sections using relative offsets -def outRelSections(sections, startsym, useseg=0): - sections = [(section.finalloc, section) for section in sections - if section.finalloc is not None] - sections.sort(key=operator.itemgetter(0)) - out = "" - for addr, section in sections: - loc = section.finalloc - if useseg: - loc = section.finalsegloc - out += ". = ( 0x%x - %s ) ;\n" % (loc, startsym) - if section.name in ('.rodata.str1.1', '.rodata'): - out += "_rodata%s = . ;\n" % (section.fileid,) - out += "*%s.*(%s)\n" % (section.fileid, section.name) - return out - -# Build linker script output for a list of relocations. -def strRelocs(outname, outrel, relocs): - relocs.sort() - return (" %s_start = ABSOLUTE(.) ;\n" % (outname,) - + "".join(["LONG(0x%x - %s)\n" % (pos, outrel) - for pos in relocs]) - + " %s_end = ABSOLUTE(.) ;\n" % (outname,)) - -# Find relocations to the given sections -def getRelocs(sections, tosection, type=None): - return [section.finalloc + reloc.offset - for section in sections - for reloc in section.relocs - if (reloc.symbol.section in tosection - and (type is None or reloc.type == type))] - -# Output the linker scripts for all required sections. -def writeLinkerScripts(li, out16, out32seg, out32flat): - # Write 16bit linker script - filesections16 = getSectionsFileid(li.sections, '16') - out = outXRefs(filesections16, useseg=1) + """ - zonelow_base = 0x%x ; - _zonelow_seg = 0x%x ; - -%s -""" % (li.zonelow_base, - int(li.zonelow_base / 16), - outSections(filesections16, useseg=1)) - outfile = open(out16, 'w') - outfile.write(COMMONHEADER + out + COMMONTRAILER) - outfile.close() - - # Write 32seg linker script - filesections32seg = getSectionsFileid(li.sections, '32seg') - out = (outXRefs(filesections32seg, useseg=1) - + outSections(filesections32seg, useseg=1)) - outfile = open(out32seg, 'w') - outfile.write(COMMONHEADER + out + COMMONTRAILER) - outfile.close() - - # Write 32flat linker script - sec32all_start = li.sec32low_start - relocstr = "" - if li.genreloc: - # Generate relocations - initsections = dict([ - (s, 1) for s in getSectionsCategory(li.sections, '32init')]) - noninitsections = dict([(s, 1) for s in li.sections - if s not in initsections]) - absrelocs = getRelocs(initsections, initsections, type='R_386_32') - relrelocs = getRelocs(initsections, noninitsections, type='R_386_PC32') - initrelocs = getRelocs(noninitsections, initsections) - relocstr = (strRelocs("_reloc_abs", "code32init_start", absrelocs) - + strRelocs("_reloc_rel", "code32init_start", relrelocs) - + strRelocs("_reloc_init", "code32flat_start", initrelocs)) - numrelocs = len(absrelocs + relrelocs + initrelocs) - sec32all_start -= numrelocs * 4 - filesections32flat = getSectionsFileid(li.sections, '32flat') - out = outXRefs([], exportsyms=li.varlowsyms - , forcedelta=li.final_sec32low_start-li.sec32low_start) - multiboot_header = "" - if li.config.get('CONFIG_MULTIBOOT'): - multiboot_header = "LONG(0x1BADB002) LONG(0) LONG(-0x1BADB002)" - sec32all_start -= 3 * 4 - sec32all_align = max([section.align for section in li.sections]) - sec32all_start = aligndown(sec32all_start, sec32all_align) - out += outXRefs(filesections32flat, exportsyms=[li.entrysym]) + """ - _reloc_min_align = 0x%x ; - zonefseg_start = 0x%x ; - zonefseg_end = 0x%x ; - zonelow_base = 0x%x ; - final_varlow_start = 0x%x ; - final_readonly_start = 0x%x ; - varlow_start = 0x%x ; - varlow_end = 0x%x ; - code32init_start = 0x%x ; - code32init_end = 0x%x ; - - code32flat_start = 0x%x ; - .text code32flat_start : { -%s -%s -%s - code32flat_end = ABSOLUTE(.) ; - } :text -""" % (li.sec32init_align, - li.zonefseg_start, - li.zonefseg_end, - li.zonelow_base, - li.final_sec32low_start, - li.final_readonly_start, - li.sec32low_start, - li.sec32low_end, - li.sec32init_start, - li.sec32init_end, - sec32all_start, - multiboot_header, - relocstr, - outRelSections(li.sections, 'code32flat_start')) - out = COMMONHEADER + out + COMMONTRAILER + """ -ENTRY(%s) -PHDRS -{ - text PT_LOAD AT ( code32flat_start ) ; -} -""" % (li.entrysym.name,) - outfile = open(out32flat, 'w') - outfile.write(out) - outfile.close() - - -###################################################################### -# Detection of unused sections and init sections -###################################################################### - -# Visit all sections reachable from a given set of start sections -def findReachable(anchorsections, checkreloc, data): - anchorsections = dict([(section, []) for section in anchorsections]) - pending = list(anchorsections) - while pending: - section = pending.pop() - for reloc in section.relocs: - chain = anchorsections[section] + [section.name] - if not checkreloc(reloc, section, data, chain): - continue - nextsection = reloc.symbol.section - if nextsection not in anchorsections: - anchorsections[nextsection] = chain - pending.append(nextsection) - return anchorsections - -# Find "runtime" sections (ie, not init only sections). -def checkRuntime(reloc, rsection, data, chain): - section = reloc.symbol.section - if section is None or '.init.' in section.name: - return 0 - if '.data.varinit.' in section.name: - print("ERROR: %s is VARVERIFY32INIT but used from %s" % ( - section.name, chain)) - sys.exit(1) - return 1 - -# Find and keep the section associated with a symbol (if available). -def checkKeepSym(reloc, syms, fileid, isxref): - symbolname = reloc.symbolname - mustbecfunc = symbolname.startswith('_cfunc') - if mustbecfunc: - symprefix = '_cfunc' + fileid + '_' - if not symbolname.startswith(symprefix): - return 0 - symbolname = symbolname[len(symprefix):] - symbol = syms.get(symbolname) - if (symbol is None or symbol.section is None - or symbol.section.name.startswith('.discard.')): - return 0 - isdestcfunc = (symbol.section.name.startswith('.text.') - and not symbol.section.name.startswith('.text.asm.')) - if ((mustbecfunc and not isdestcfunc) - or (not mustbecfunc and isdestcfunc and isxref)): - return 0 - - reloc.symbol = symbol - return 1 - -# Resolve a relocation and check if it should be kept in the final binary. -def checkKeep(reloc, section, symbols, chain): - ret = checkKeepSym(reloc, symbols[section.fileid], section.fileid, 0) - if ret: - return ret - # Not in primary sections - it may be a cross 16/32 reference - for fileid in ('16', '32seg', '32flat'): - if fileid != section.fileid: - ret = checkKeepSym(reloc, symbols[fileid], fileid, 1) - if ret: - return ret - return 0 - - -###################################################################### -# Startup and input parsing -###################################################################### - -class Section: - name = size = alignment = fileid = relocs = None - finalloc = finalsegloc = category = None -class Reloc: - offset = type = symbolname = symbol = None -class Symbol: - name = offset = section = None - -# Read in output from objdump -def parseObjDump(file, fileid): - # sections = [section, ...] - sections = [] - sectionmap = {} - # symbols[symbolname] = symbol - symbols = {} - - state = None - for line in file.readlines(): - line = line.rstrip() - if line == 'Sections:': - state = 'section' - continue - if line == 'SYMBOL TABLE:': - state = 'symbol' - continue - if line.startswith('RELOCATION RECORDS FOR ['): - sectionname = line[24:-2] - if sectionname.startswith('.debug_'): - # Skip debugging sections (to reduce parsing time) - state = None - continue - state = 'reloc' - relocsection = sectionmap[sectionname] - continue - - if state == 'section': - try: - idx, name, size, vma, lma, fileoff, align = line.split() - if align[:3] != '2**': - continue - section = Section() - section.name = name - section.size = int(size, 16) - section.align = 2**int(align[3:]) - section.fileid = fileid - section.relocs = [] - sections.append(section) - sectionmap[name] = section - except ValueError: - pass - continue - if state == 'symbol': - try: - parts = line[17:].split() - if len(parts) == 3: - sectionname, size, name = parts - elif len(parts) == 4 and parts[2] == '.hidden': - sectionname, size, hidden, name = parts - else: - continue - symbol = Symbol() - symbol.size = int(size, 16) - symbol.offset = int(line[:8], 16) - symbol.name = name - symbol.section = sectionmap.get(sectionname) - symbols[name] = symbol - except ValueError: - pass - continue - if state == 'reloc': - try: - off, type, symbolname = line.split() - reloc = Reloc() - reloc.offset = int(off, 16) - reloc.type = type - reloc.symbolname = symbolname - reloc.symbol = symbols.get(symbolname) - if reloc.symbol is None: - # Some binutils (2.20.1) give section name instead - # of a symbol - create a dummy symbol. - reloc.symbol = symbol = Symbol() - symbol.size = 0 - symbol.offset = 0 - symbol.name = symbolname - symbol.section = sectionmap.get(symbolname) - symbols[symbolname] = symbol - relocsection.relocs.append(reloc) - except ValueError: - pass - return sections, symbols - -# Parser for constants in simple C header files. -def scanconfig(file): - f = open(file, 'r') - opts = {} - for l in f.readlines(): - parts = l.split() - if len(parts) != 3: - continue - if parts[0] != '#define': - continue - value = parts[2] - if value.isdigit() or (value.startswith('0x') and value[2:].isdigit()): - value = int(value, 0) - opts[parts[1]] = value - return opts - -def main(): - # Get output name - in16, in32seg, in32flat, cfgfile, out16, out32seg, out32flat = sys.argv[1:] - - # Read in the objdump information - infile16 = open(in16, 'r') - infile32seg = open(in32seg, 'r') - infile32flat = open(in32flat, 'r') - - # infoX = (sections, symbols) - info16 = parseObjDump(infile16, '16') - info32seg = parseObjDump(infile32seg, '32seg') - info32flat = parseObjDump(infile32flat, '32flat') - - # Read kconfig config file - config = scanconfig(cfgfile) - - # larger roms have more room in the f-segment due to moving out 32bit code - if config.get('CONFIG_ROM_SIZE') >= 256: - BUILD_MIN_BIOSTABLE = 8192 - - # Figure out which sections to keep. - allsections = info16[0] + info32seg[0] + info32flat[0] - symbols = {'16': info16[1], '32seg': info32seg[1], '32flat': info32flat[1]} - if config.get('CONFIG_COREBOOT'): - entrysym = symbols['16'].get('entry_elf') - elif config.get('CONFIG_CSM'): - entrysym = symbols['16'].get('entry_csm') - else: - entrysym = symbols['16'].get('reset_vector') - anchorsections = [entrysym.section] + [ - section for section in allsections - if section.name.startswith('.fixedaddr.')] - keepsections = findReachable(anchorsections, checkKeep, symbols) - sections = [section for section in allsections if section in keepsections] - - # Separate 32bit flat into runtime, init, and special variable parts - anchorsections = [ - section for section in sections - if ('.data.varlow.' in section.name or '.data.varfseg.' in section.name - or '.fixedaddr.' in section.name or '.runtime.' in section.name)] - runtimesections = findReachable(anchorsections, checkRuntime, None) - for section in sections: - if section.name.startswith('.data.varlow.'): - section.category = '32low' - elif section.name.startswith('.data.varfseg.'): - section.category = '32fseg' - elif section.name.startswith('.text.32fseg.'): - section.category = '32textfseg' - elif section.name.startswith('.fixedaddr.'): - section.category = 'fixed' - elif section.fileid == '32flat' and section not in runtimesections: - section.category = '32init' - else: - section.category = section.fileid - - # Determine the final memory locations of each kept section. - genreloc = '_reloc_abs_start' in symbols['32flat'] - li = doLayout(sections, config, genreloc) - - # Exported symbols - li.varlowsyms = [symbol for symbol in symbols['32flat'].values() - if (symbol.section is not None - and symbol.section.finalloc is not None - and '.data.varlow.' in symbol.section.name - and symbol.name != symbol.section.name)] - li.entrysym = entrysym - - # Write out linker script files. - writeLinkerScripts(li, out16, out32seg, out32flat) - -if __name__ == '__main__': - main() diff --git a/payloads/external/SeaBIOS/scripts/ldnoexec.py b/payloads/external/SeaBIOS/scripts/ldnoexec.py deleted file mode 100755 index 60bed078..00000000 --- a/payloads/external/SeaBIOS/scripts/ldnoexec.py +++ /dev/null @@ -1,32 +0,0 @@ -#!/usr/bin/env python -# Script to remove EXEC flag from an ELF file -# -# Copyright (C) 2020 Kevin O'Connor <kevin@koconnor.net> -# -# This file may be distributed under the terms of the GNU GPLv3 license. -import optparse - -FLAG_OFFSET = 16 - -def main(): - # Parse command-line arguments - usage = "%prog <input_file> <output_file>" - opts = optparse.OptionParser(usage) - options, args = opts.parse_args() - if len(args) != 2: - opts.error("Incorrect number of arguments") - infilename, outfilename = args - # Read input - f = open(infilename, "rb") - srcdata = f.read() - f.close() - # Update - outdata = bytearray(srcdata) - outdata[FLAG_OFFSET] = 0x01 # change ET_EXEC to ET_REL - # Write output - f = open(outfilename, "wb") - f.write(outdata) - f.close() - -if __name__ == '__main__': - main() diff --git a/payloads/external/SeaBIOS/scripts/python23compat.py b/payloads/external/SeaBIOS/scripts/python23compat.py deleted file mode 100644 index 572b7f18..00000000 --- a/payloads/external/SeaBIOS/scripts/python23compat.py +++ /dev/null @@ -1,14 +0,0 @@ -# Helper code for compatibility of the code with both Python 2 and Python 3 -# -# Copyright (C) 2014 Johannes Krampf <johannes.krampf@googlemail.com> -# -# This file may be distributed under the terms of the GNU GPLv3 license. - -import sys - -if (sys.version_info > (3, 0)): - def as_bytes(str): - return bytes(str, "ASCII") -else: - def as_bytes(str): - return str diff --git a/payloads/external/SeaBIOS/scripts/readserial.py b/payloads/external/SeaBIOS/scripts/readserial.py deleted file mode 100755 index a7383e83..00000000 --- a/payloads/external/SeaBIOS/scripts/readserial.py +++ /dev/null @@ -1,190 +0,0 @@ -#!/usr/bin/env python -# Script that can read from a serial device and show timestamps. -# -# Copyright (C) 2009 Kevin O'Connor <kevin@koconnor.net> -# -# This file may be distributed under the terms of the GNU GPLv3 license. - -# Usage: -# scripts/readserial.py /dev/ttyUSB0 115200 - -import sys, os, time, select, optparse - -from python23compat import as_bytes - -# Reset time counter after this much idle time. -RESTARTINTERVAL = 60 -# Number of bits in a transmitted byte - 8N1 is 1 start bit + 8 data -# bits + 1 stop bit. -BITSPERBYTE = 10 - -def calibrateserialwrite(outfile, byteadjust): - # Build 4000 bytes of dummy data. - data = "0123456789" * 4 + "012345678" + "\n" - data = data * 80 - while 1: - st = time.time() - outfile.write(as_bytes(data)) - outfile.flush() - et = time.time() - sys.stdout.write( - "Wrote %d - %.1fus per char (theory states %.1fus)\n" % ( - len(data), (et-st) / len(data) * 1000000, byteadjust * 1000000)) - sys.stdout.flush() - time.sleep(3) - -def calibrateserialread(infile, byteadjust): - starttime = lasttime = 0 - totalchars = 0 - while 1: - select.select([infile], [], []) - d = infile.read(4096) - curtime = time.time() - if curtime - lasttime > 1.0: - if starttime and totalchars: - sys.stdout.write( - "Calibrating on %d bytes - %.1fus per char" - " (theory states %.1fus)\n" % ( - totalchars, - float(lasttime - starttime) * 1000000 / totalchars, - byteadjust * 1000000)) - totalchars = 0 - starttime = curtime - else: - totalchars += len(d) - lasttime = curtime - -def readserial(infile, logfile, byteadjust): - lasttime = 0 - while 1: - # Read data - try: - res = select.select([infile, sys.stdin], [], []) - except KeyboardInterrupt: - sys.stdout.write("\n") - return -1 - if sys.stdin in res[0]: - # Got keyboard input - force reset on next serial input - sys.stdin.read(1) - lasttime = 0 - if len(res[0]) == 1: - continue - d = infile.read(4096) - if not d: - return 0 - datatime = time.time() - - datatime -= len(d) * byteadjust - - # Reset start time if no data for some time - if datatime - lasttime > RESTARTINTERVAL: - starttime = datatime - charcount = 0 - isnewline = 1 - msg = "\n\n======= %s (adjust=%.1fus)\n" % ( - time.asctime(time.localtime(datatime)), byteadjust * 1000000) - sys.stdout.write(msg) - logfile.write(as_bytes(msg)) - lasttime = datatime - - # Translate unprintable chars; add timestamps - out = as_bytes("") - for c in d: - if isnewline: - delta = datatime - starttime - (charcount * byteadjust) - out += "%06.3f: " % delta - isnewline = 0 - oc = ord(c) - charcount += 1 - datatime += byteadjust - if oc == 0x0d: - continue - if oc == 0x00: - out += "<00>\n" - isnewline = 1 - continue - if oc == 0x0a: - out += "\n" - isnewline = 1 - continue - if oc < 0x20 or oc >= 0x7f and oc != 0x09: - out += "<%02x>" % oc - continue - out += c - - if (sys.version_info > (3, 0)): - sys.stdout.buffer.write(out) - else: - sys.stdout.write(out) - sys.stdout.flush() - logfile.write(out) - logfile.flush() - -def main(): - usage = "%prog [options] [<serialdevice> [<baud>]]" - opts = optparse.OptionParser(usage) - opts.add_option("-f", "--file", - action="store_false", dest="serial", default=True, - help="read from unix named pipe instead of serialdevice") - opts.add_option("-n", "--no-adjust", - action="store_false", dest="adjustbaud", default=True, - help="don't adjust times by serial rate") - opts.add_option("-c", "--calibrate-read", - action="store_true", dest="calibrate_read", default=False, - help="read from serial port to calibrate it") - opts.add_option("-C", "--calibrate-write", - action="store_true", dest="calibrate_write", default=False, - help="write to serial port to calibrate it") - opts.add_option("-t", "--time", - type="float", dest="time", default=None, - help="time to write one byte on serial port (in us)") - options, args = opts.parse_args() - serialport = 0 - baud = 115200 - if len(args) > 2: - opts.error("Too many arguments") - if len(args) > 0: - serialport = args[0] - if len(args) > 1: - baud = int(args[1]) - byteadjust = float(BITSPERBYTE) / baud - if options.time is not None: - byteadjust = options.time / 1000000.0 - if not options.adjustbaud: - byteadjust = 0.0 - - if options.serial: - # Read from serial port - try: - import serial - except ImportError: - print(""" -Unable to find pyserial package ( http://pyserial.sourceforge.net/ ). -On Linux machines try: yum install pyserial -Or: apt-get install python-serial -""") - sys.exit(1) - ser = serial.Serial(serialport, baud, timeout=0) - - if options.calibrate_read: - calibrateserialread(ser, byteadjust) - return - if options.calibrate_write: - calibrateserialwrite(ser, byteadjust) - return - - logname = time.strftime("seriallog-%Y%m%d_%H%M%S.log") - f = open(logname, 'wb') - if options.serial: - readserial(ser, f, byteadjust) - else: - # Read from a pipe - while 1: - ser = os.fdopen(os.open(serialport, os.O_RDONLY|os.O_NONBLOCK), 'rb') - res = readserial(ser, f, byteadjust) - ser.close() - if res < 0: - break - -if __name__ == '__main__': - main() diff --git a/payloads/external/SeaBIOS/scripts/tarball.sh b/payloads/external/SeaBIOS/scripts/tarball.sh deleted file mode 100755 index 06d85546..00000000 --- a/payloads/external/SeaBIOS/scripts/tarball.sh +++ /dev/null @@ -1,36 +0,0 @@ -#!/bin/sh -# -# Script to create seabios release and snapshot tarballs. -# Accepts conmmit (hash, tag, branch, ...) as first argument, -# uses HEAD if unspecified. -# - -commit="${1-HEAD}" - -# figure name for the tarball -reltag="$(git describe --tags --match 'rel-*' --exact $commit 2>/dev/null)" -if test "$reltag" != ""; then - # release - name="${reltag#rel-}" -else - # snapshot - reltag="$(git describe --tags --match 'rel-*' $commit 2>/dev/null)" - name="snap-${reltag#rel-}" -fi - -# export tarball archive from git -prefix="seabios-${name}/" -output="seabios-${name}.tar" -echo "# commit $commit -> tarball: ${output}.gz" -rm -f "$output" "${output}.gz" -git archive --format=tar --prefix="$prefix" "$commit" > "$output" - -# add .version file to tarball -dotver="$(mktemp dotver.XXXXXX)" -echo "$name" > "$dotver" -tar --append --file="$output" --owner=root --group=root --mode=0664 \ - --transform "s:${dotver}:${prefix}.version:" "$dotver" -rm -f "$dotver" - -# finally compress it -gzip "$output" diff --git a/payloads/external/SeaBIOS/scripts/test-build.sh b/payloads/external/SeaBIOS/scripts/test-build.sh deleted file mode 100755 index 25cc2f20..00000000 --- a/payloads/external/SeaBIOS/scripts/test-build.sh +++ /dev/null @@ -1,90 +0,0 @@ -#!/bin/sh -# Script to test if the build works properly. - -mkdir -p ${OUT} -TMPFILE1=${OUT}/tmp_testcompile1.c -TMPFILE1o=${OUT}/tmp_testcompile1.o -TMPFILE1_ld=${OUT}/tmp_testcompile1.lds -TMPFILE2=${OUT}/tmp_testcompile2.c -TMPFILE2o=${OUT}/tmp_testcompile2.o -TMPFILE3o=${OUT}/tmp_testcompile3.o - -# Test if ld's alignment handling is correct. This is a known problem -# with the linker that ships with Ubuntu 11.04. -cat - > $TMPFILE1 <<EOF -const char v1[] __attribute__((section(".text.v1"))) = "0123456789"; -const char v2[] __attribute__((section(".text.v2"))) = "0123456789"; -EOF -cat - > $TMPFILE1_ld <<EOF -SECTIONS -{ - .mysection 0x88f0 : { -. = 0x10 ; -*(.text.v1) -. = 0x20 ; -*(.text.v2) -. = 0x30 ; - } -} -EOF -$CC -O -g -c $TMPFILE1 -o $TMPFILE1o > /dev/null 2>&1 -if [ $? -ne 0 ]; then - echo "Unable to execute the C compiler ($CC)." >&2 - echo "" >&2 - echo "Please install a working compiler and retry." >&2 - echo -1 - exit 0 -fi -$LD -T $TMPFILE1_ld $TMPFILE1o -o $TMPFILE2o > /dev/null 2>&1 -if [ $? -ne 0 ]; then - echo "The version of LD on this system ($LD) does not properly handle" >&2 - echo "alignments. As a result, this project can not be built." >&2 - echo "" >&2 - echo "The problem may be the result of this LD bug report:" >&2 - echo " http://sourceware.org/bugzilla/show_bug.cgi?id=12726" >&2 - echo "" >&2 - echo "Please update to a working version of binutils and retry." >&2 - echo -1 - exit 0 -fi - -# Test for "-fwhole-program". Older versions of gcc (pre v4.1) don't -# support the whole-program optimization - detect that. -$CC -fwhole-program -S -o /dev/null -xc /dev/null > /dev/null 2>&1 -if [ $? -ne 0 ]; then - echo " Working around no -fwhole-program" >&2 - echo 2 - exit 0 -fi - -# Test if "visible" variables and functions are marked global. On -# OpenSuse 10.3 "visible" variables declared with "extern" first -# aren't marked as global in the resulting assembler. On Ubuntu 7.10 -# "visible" functions aren't marked as global in the resulting -# assembler. -cat - > $TMPFILE1 <<EOF -void __attribute__((externally_visible)) t1() { } -extern unsigned char v1; -unsigned char v1 __attribute__((section(".data16.foo.19"))) __attribute__((externally_visible)); -EOF -$CC -Os -c -fwhole-program $TMPFILE1 -o $TMPFILE1o > /dev/null 2>&1 -cat - > $TMPFILE2 <<EOF -void t1(); -extern unsigned char v1; -int __attribute__((externally_visible)) main() { t1(); return v1; } -EOF -$CC -Os -c -fwhole-program $TMPFILE2 -o $TMPFILE2o > /dev/null 2>&1 -$CC -nostdlib -Os $TMPFILE1o $TMPFILE2o -o $TMPFILE3o > /dev/null 2>&1 -if [ $? -ne 0 ]; then - echo " Working around non-functional -fwhole-program" >&2 - echo 2 - exit 0 -fi - -echo 0 - -# Also, the Ubuntu 8.04 compiler has a bug causing corruption when the -# "ebp" register is clobberred in an "asm" statement. The code has -# been modified to not clobber "ebp" - no test is available yet. - -rm -f $TMPFILE1 $TMPFILE1o $TMPFILE1_ld $TMPFILE2 $TMPFILE2o $TMPFILE3o diff --git a/payloads/external/SeaBIOS/scripts/transdump.py b/payloads/external/SeaBIOS/scripts/transdump.py deleted file mode 100755 index 665f04a0..00000000 --- a/payloads/external/SeaBIOS/scripts/transdump.py +++ /dev/null @@ -1,53 +0,0 @@ -#!/usr/bin/env python - -# This script is useful for taking the output of memdump() and -# converting it back into binary output. This can be useful, for -# example, when one wants to push that data into other tools like -# objdump or hexdump. -# -# (C) Copyright 2010 Kevin O'Connor <kevin@koconnor.net> -# -# This file may be distributed under the terms of the GNU GPLv3 license. - -import sys -import struct - -def unhex(str): - return int(str, 16) - -def parseMem(filehdl): - mem = [] - for line in filehdl: - parts = line.split(':') - if len(parts) < 2: - continue - try: - vaddr = unhex(parts[0]) - parts = parts[1].split() - mem.extend([unhex(v) for v in parts]) - except ValueError: - continue - return mem - -def printUsage(): - sys.stderr.write("Usage:\n %s <file | ->\n" - % (sys.argv[0],)) - sys.exit(1) - -def main(): - if len(sys.argv) != 2: - printUsage() - filename = sys.argv[1] - if filename == '-': - filehdl = sys.stdin - else: - filehdl = open(filename, 'r') - mem = parseMem(filehdl) - for i in mem: - if (sys.version_info > (3, 0)): - sys.stdout.buffer.write(struct.pack("<I", i)) - else: - sys.stdout.write(struct.pack("<I", i)) - -if __name__ == '__main__': - main() diff --git a/payloads/external/SeaBIOS/scripts/vgafixup.py b/payloads/external/SeaBIOS/scripts/vgafixup.py deleted file mode 100644 index 2053cd5d..00000000 --- a/payloads/external/SeaBIOS/scripts/vgafixup.py +++ /dev/null @@ -1,96 +0,0 @@ -#!/usr/bin/env python -# Work around x86emu bugs by replacing problematic instructions. -# -# Copyright (C) 2012 Kevin O'Connor <kevin@koconnor.net> -# -# This file may be distributed under the terms of the GNU GPLv3 license. - -# The x86emu code widely used in Linux distributions when running Xorg -# in vesamode is known to have issues with "retl", "leavel", "entryl", -# "leal", and some variants of "calll". This code modifies those -# instructions that are known to be generated by gcc to avoid -# triggering the x86emu bugs. - -# It is also known that the Windows vgabios emulator has issues with -# addressing negative offsets to the %esp register. That has been -# worked around by not using the gcc parameter "-fomit-frame-pointer" -# when compiling. - -import sys, re - -# leal parameter regex - example string: -3(%edx,%eax,8), %eax -re_leal = re.compile( - r'^\s*(?P<offset>[^(]*?)\s*' - r'\(\s*(?P<base>[^,)]*?)\s*(?:,\s*(?P<index>[^,)]*?)\s*)?' - r'(?:,\s*(?P<scale>[^,)]*?)\s*)?\)\s*' - r',\s*(?P<dest>.*?)\s*$') - -# Find an alternate set of instructions for a given "leal" instruction -def handle_leal(sline): - m = re_leal.match(sline[5:]) - if m is None or m.group('index') == '%esp': - print("Unable to fixup leal instruction: %s" % (sline,)) - sys.exit(-1) - offset, base, index, scale, dest = m.group( - 'offset', 'base', 'index', 'scale', 'dest') - if dest == '%esp': - # If destination is %esp then just use 16bit leaw instead - return 'leaw %s\n' % (sline[5:].replace('%e', '%'),) - if not scale: - scale = '1' - scale = {1: 0, 2: 1, 4: 2, 8: 3}[int(scale, 0)] - # Try to rearrange arguments to simplify 'base' (to improve code gen) - if not scale and base == index: - base, index, scale = '', index, 1 - elif not index or (not scale and base in (dest, '%esp') and index != dest): - base, index, scale = index, base, 0 - # Produce instructions to calculate "leal" - insns = ['pushfw'] - if base != dest: - # Calculate "leal" directly in dest register - if index != dest: - insns.insert(0, 'movl %s, %s' % (index, dest)) - if scale: - insns.append('shll $%d, %s' % (scale, dest)) - if base: - if base == '%esp': - offset += '+2' - insns.append('addl %s, %s' % (base, dest)) - elif base == index: - # Use "imull" method - insns.append('imull $%d, %s' % ((1<<scale)+1, dest)) - else: - # Backup/restore index register and do scaling in index register - insns.append('pushl %s' % (index,)) - insns.append('shll $%d, %s' % (scale, index)) - insns.append('addl %s, %s' % (index, dest)) - insns.append('popl %s' % (index,)) - if offset and offset != '0': - insns.append('addl $%s, %s' % (offset, dest)) - insns.append('popfw\n') - return ' ; '.join(insns) - -def main(): - infilename, outfilename = sys.argv[1:] - infile = open(infilename, 'r') - out = [] - for line in infile: - sline = line.strip() - if sline == 'ret': - out.append('retw $2\n') - elif sline == 'leave': - out.append('movl %ebp, %esp ; popl %ebp\n') - elif sline.startswith('call'): - out.append('pushw %ax ; callw' + sline[4:] + '\n') - elif sline.startswith('leal'): - out.append(handle_leal(sline)) - #print("-> %s\n %s" % (sline, out[-1].strip())) - else: - out.append(line) - infile.close() - outfile = open(outfilename, 'w') - outfile.write(''.join(out)) - outfile.close() - -if __name__ == '__main__': - main() diff --git a/payloads/external/SeaBIOS/src/Kconfig b/payloads/external/SeaBIOS/src/Kconfig deleted file mode 100644 index 3a8ffa15..00000000 --- a/payloads/external/SeaBIOS/src/Kconfig +++ /dev/null @@ -1,593 +0,0 @@ -# Kconfig SeaBIOS configuration - -mainmenu "SeaBIOS Configuration" - -menu "General Features" - -choice - prompt "Build Target" - default QEMU - - config COREBOOT - bool "Build for coreboot" - help - Configure as a coreboot payload. - - config QEMU - bool "Build for QEMU/Xen/KVM/Bochs" - select QEMU_HARDWARE - help - Configure for an emulated machine (QEMU, Xen, KVM, or Bochs). - - config CSM - bool "Build as Compatibility Support Module for EFI BIOS" - help - Configure to be used by EFI firmware as Compatibility Support - module (CSM) to provide legacy BIOS services. - -endchoice - - config QEMU_HARDWARE - bool "Support hardware found on emulators (QEMU/Xen/KVM/Bochs)" if !QEMU - default n - help - Support virtual hardware when the code detects it is - running on an emulator. - - config XEN - depends on QEMU - bool "Support Xen HVM" - default y - help - Configure to be used by xen hvmloader, for a HVM guest. - - config THREADS - bool "Parallelize hardware init" - default y - help - Support running hardware initialization in parallel. - - config RELOCATE_INIT - bool "Copy init code to high memory" - default y - help - Support relocating the one time initialization code to high memory. - - config BOOTMENU - depends on BOOT - bool "Bootmenu" - default y - help - Support an interactive boot menu at end of post. - config BOOTSPLASH - depends on BOOTMENU - bool "Graphical boot splash screen" - default y - help - Support showing a graphical boot splash screen. - config BOOTORDER - depends on BOOT - bool "Boot ordering" - default y - help - Support controlling of the boot order via the fw_cfg/CBFS - "bootorder" file. - config HOST_BIOS_GEOMETRY - depends on BOOT - bool "Boot device bios geometry override" - default y - help - Support overriding bios (logical) geometry of boot devices via the - fw_cfg/CBFS "bios-geometry" file. - - config COREBOOT_FLASH - depends on COREBOOT - bool "coreboot CBFS support" - default y - help - Support searching coreboot flash format. - config LZMA - depends on COREBOOT_FLASH - bool "CBFS lzma support" - default y - help - Support CBFS files compressed using the lzma decompression - algorithm. - config CBFS_LOCATION - depends on COREBOOT_FLASH - hex "CBFS memory end location" - default 0 - help - Memory address of where the CBFS data ends. This should - be zero for normal builds. It may be a non-zero value if - the CBFS filesystem is at a non-standard location (eg, - 0xffe00000 if CBFS ends 2Meg below the end of flash). - - config MULTIBOOT - depends on COREBOOT - bool "multiboot support" - default y - help - Add multiboot header in bios.bin.raw and accept files supplied - as multiboot modules. - config ENTRY_EXTRASTACK - bool "Use internal stack for 16bit interrupt entry points" - default y - help - Utilize an internal stack for all the legacy 16bit - interrupt entry points. This reduces the amount of space - on the caller's stack that SeaBIOS uses. This may - adversely impact any legacy operating systems that call - the BIOS in 16bit protected mode. - - config MALLOC_UPPERMEMORY - bool "Allocate memory that needs to be in first Meg above 0xc0000" - default y - help - Use the "Upper Memory Block" area (0xc0000-0xf0000) for - internal "low memory" allocations. If this is not - selected, the memory is instead allocated from the - "9-segment" (0x90000-0xa0000). - - config ROM_SIZE - int "ROM size (in KB)" - default 0 - help - Set the ROM size. Say '0' here to make seabios figure the - needed size automatically. - - Currently SeaBIOS will easily fit into 256 KB. To make it fit - it into 128 KB (which was big enouth for a long time) you'll - probably have to disable some featues such as xhci support. - -endmenu - -menu "Hardware support" - config ATA - depends on DRIVES - bool "ATA controllers" - default y - help - Support for IDE disk code. - config ATA_DMA - depends on ATA - bool "ATA DMA" - default n - help - Detect and try to use ATA bus mastering DMA controllers. - config ATA_PIO32 - depends on ATA - bool "ATA 32bit PIO" - default n - help - Use 32bit PIO accesses on ATA (minor optimization on PCI transfers). - config AHCI - depends on DRIVES - bool "AHCI controllers" - default y - help - Support for AHCI disk code. - config SDCARD - depends on DRIVES - bool "SD controllers" - default y - help - Support for SD cards on PCI host controllers. - config VIRTIO_BLK - depends on DRIVES && QEMU_HARDWARE - bool "virtio-blk controllers" - default y - help - Support boot from virtio-blk storage. - config VIRTIO_SCSI - depends on DRIVES && QEMU_HARDWARE - bool "virtio-scsi controllers" - default y - help - Support boot from virtio-scsi storage. - config PVSCSI - depends on DRIVES && QEMU_HARDWARE - bool "PVSCSI controllers" - default y - help - Support boot from Paravirtualized SCSI storage. This kind of storage - is mainly supported by VMware ESX hypervisor. It is commonly used - to allow fast storage access by communicating directly with the - underlying hypervisor. Enabling this type of boot will allow - booting directly from images imported from an ESX platform, - without the need to use slower emulation of storage controllers - such as IDE. - config ESP_SCSI - depends on DRIVES && QEMU_HARDWARE - bool "AMD PCscsi controllers" - default y - help - Support boot from AMD PCscsi storage. - config LSI_SCSI - depends on DRIVES && QEMU_HARDWARE - bool "lsi53c895a scsi controllers" - default y - help - Support boot from qemu-emulated lsi53c895a scsi storage. - config MEGASAS - depends on DRIVES - bool "LSI MegaRAID SAS controllers" - default y - help - Support boot from LSI MegaRAID SAS scsi storage. - config MPT_SCSI - depends on DRIVES && QEMU_HARDWARE - bool "LSI MPT Fusion controllers" - default y - help - Support boot from LSI MPT Fusion scsi storage. - config FLOPPY - depends on DRIVES && HARDWARE_IRQ - bool "Floppy controller" - default y - help - Support floppy drive access. - config FLASH_FLOPPY - depends on DRIVES - bool "Floppy images from CBFS or fw_cfg" - default y - help - Support floppy images stored in coreboot flash or from - QEMU fw_cfg. - config NVME - depends on DRIVES - bool "NVMe controllers" - default y - help - Support for NVMe disk code. - - config PS2PORT - depends on KEYBOARD || MOUSE - bool "PS/2 port" - default y - help - Support PS2 ports (keyboard and mouse). - - config USB - bool "USB" - default y - help - Support USB devices. - config USB_UHCI - depends on USB - bool "USB UHCI controllers" - default y - help - Support USB UHCI controllers. - config USB_OHCI - depends on USB - bool "USB OHCI controllers" - default y - help - Support USB OHCI controllers. - config USB_EHCI - depends on USB - bool "USB EHCI controllers" - default y - help - Support USB EHCI controllers. - config USB_XHCI - depends on USB - bool "USB XHCI controllers" - default y - help - Support USB XHCI controllers. - config USB_MSC - depends on USB && DRIVES - bool "USB drives" - default y - help - Support USB BOT (bulk-only transport) disks. - config USB_UAS - depends on USB && DRIVES - bool "UAS drives" - default y - help - Support USB UAS (usb attached scsi) disks. - config USB_HUB - depends on USB - bool "USB hubs" - default y - help - Support USB hubs. - config USB_KEYBOARD - depends on USB && KEYBOARD - bool "USB keyboards" - default y - help - Support USB keyboards. - config USB_MOUSE - depends on USB && MOUSE - bool "USB mice" - default y - help - Support USB mice. - - config SERIAL - bool "Serial port" - default y - help - Support serial ports. This also enables int 14 serial port calls. - config SERCON - bool "Serial console" - default y - help - Support redirecting vga output to the serial console. - config LPT - bool "Parallel port" - default y - help - Support parallel ports. This also enables int 17 parallel port calls. - config RTC_TIMER - bool "Real Time Clock (RTC) scheduling" - depends on HARDWARE_IRQ - default y - help - Support MC146818 Real Time Clock chip timer - interrupts. This also enables int 1583 and int 1586 calls. - - Disabling this support does not disable access to the RTC - cmos registers. - - config HARDWARE_IRQ - bool "Hardware interrupts" - default y - help - Program and support hardware interrupts using the i8259 - programmable interrupt controller (PIC). This option must - be enabled in order to support most boot loaders. Only - disable this option if running on peculiar hardware known - not to support irq routing. - - config USE_SMM - depends on QEMU - bool "System Management Mode (SMM)" - default y - help - Support System Management Mode (on emulators). - config CALL32_SMM - bool - depends on USE_SMM - default y - config MTRR_INIT - depends on QEMU - bool "Initialize MTRRs" - default y - help - Initialize the Memory Type Range Registers (on emulators). - config PMTIMER - bool "Support ACPI timer" - default y - help - Detect and use the ACPI timer for timekeeping. - config TSC_TIMER - bool "Support CPU timestamp counter as timer" - default y - help - Support for using the CPU timestamp counter as an internal - timing source. -endmenu - -menu "BIOS interfaces" - config DRIVES - bool "Drive interface" - default y - help - Support int13 disk/floppy drive functions. - - config CDROM_BOOT - depends on DRIVES - bool "DVD/CDROM booting" - default y - help - Support for booting from a CD. (El Torito spec support.) - config CDROM_EMU - depends on CDROM_BOOT - bool "DVD/CDROM boot drive emulation" - default y - help - Support bootable CDROMs that emulate a floppy/harddrive. - - config PCIBIOS - bool "PCIBIOS interface" - default y - help - Support int 1a/b1 PCI BIOS calls. - config APMBIOS - bool "APM interface" - default y - help - Support int 15/53 APM BIOS calls. - config PNPBIOS - bool "PnP BIOS interface" - default y - help - Support PnP BIOS entry point. - config OPTIONROMS - bool "Option ROMS" - default y - help - Support finding and running option roms during POST. - config PMM - depends on OPTIONROMS - bool "PMM interface" - default y - help - Support Post Memory Manager (PMM) entry point. - config BOOT - bool "Boot interface" - default y - help - Support int 19/18 system bootup support. - config KEYBOARD - bool "Keyboard interface" - default y - help - Support int 16 keyboard calls. - config KBD_CALL_INT15_4F - depends on KEYBOARD - bool "Keyboard hook interface" - default y - help - Support calling int155f on each keyboard event. - config MOUSE - bool "Mouse interface" - default y - help - Support for int15c2 mouse calls. - - config S3_RESUME - bool "S3 resume" - default y - help - Support S3 resume handler. - - config VGAHOOKS - bool "Hardware specific VGA helpers" - default y - help - Support int 155f BIOS callbacks specific to some Intel and - VIA on-board vga devices. - - config DISABLE_A20 - bool "Disable A20" - default n - help - Disable A20 on 16bit boot. - - config WRITABLE_UPPERMEMORY - depends on QEMU - bool "Make unused UMB memory read/writeable." - default n - help - When selected, the "Upper Memory Block" area - (0x90000-0xa0000) that is not used for option roms will be - made writable. This allows the ram to be directly - modified by programs. However, some old DOS high memory - managers may require the UMB region to be read-only. - - config TCGBIOS - depends on S3_RESUME - bool "TPM support and TCG BIOS extensions" - default y - help - Provide TPM support along with TCG BIOS extensions - -endmenu - -menu "BIOS Tables" - depends on QEMU - config PIRTABLE - bool "PIR table" - default y - help - Support generation of a PIR table in 0xf000 segment. - config MPTABLE - bool "MPTable" - default y - help - Support generation of MPTable. - config SMBIOS - bool "SMBIOS" - default y - help - Support generation of SM BIOS tables. This is also - sometimes called DMI. - config ACPI - bool "ACPI" - default y - help - Support generation of ACPI tables. - config ACPI_DSDT - bool "Include default ACPI DSDT" - default y - depends on ACPI - help - Include default DSDT ACPI table in BIOS. - Required for QEMU 1.3 and older. - This option can be disabled for QEMU 1.4 and newer - to save some space in the ROM file. - If unsure, say Y. - config FW_ROMFILE_LOAD - bool "Load BIOS tables from ROM files" - depends on QEMU_HARDWARE - default y - help - Support loading BIOS firmware tables from ROM files. - At the moment, only ACPI tables can be loaded in this way. - Required for QEMU 1.7 and newer. - This option can be disabled for QEMU 1.6 and older - to save some space in the ROM file. - If unsure, say Y. - config ACPI_PARSE - bool "Include ACPI DSDT parser." - default y - help - Support parsing ACPI DSDT for device probing. - Needed to find virtio-mmio devices. - If unsure, say Y. -endmenu - -source vgasrc/Kconfig - -menu "Debugging" - config DEBUG_LEVEL - int "Debug level" - default 1 - help - Control how verbose debug output is. The higher the - number, the more verbose SeaBIOS will be. - - Set to zero to disable debugging. - - config DEBUG_SERIAL - depends on DEBUG_LEVEL != 0 - bool "Serial port debugging" - default n - help - Send debugging information to serial port. - config DEBUG_SERIAL_PORT - depends on DEBUG_SERIAL - hex "Serial port base address" - default 0x3f8 - help - Base port for serial - generally 0x3f8, 0x2f8, 0x3e8, or 0x2e8. - config DEBUG_SERIAL_MMIO - depends on DEBUG_LEVEL != 0 && !DEBUG_SERIAL - bool "Serial port debugging via memory mapped IO" - default n - help - Send debugging information to serial port mapped in memory. - config DEBUG_SERIAL_MEM_ADDRESS - depends on DEBUG_SERIAL_MMIO - hex "Serial port memory mapped IO address" - help - On some chipsets the serial port is memory mapped, in those cases - provide the 32 bit address. E.g. 0xFEDC6000 for the AMD Kern - (a.k.a Hudson UART). - - config DEBUG_IO - depends on QEMU_HARDWARE && DEBUG_LEVEL != 0 - bool "Special IO port debugging" - default y - help - Some emulators or hypervisors provide with a way to output debug - information by outputing strings in a special port present in the - IO space. - - config DEBUG_COREBOOT - depends on COREBOOT && DEBUG_LEVEL != 0 - bool "coreboot cbmem debug logging" - default y - help - Send debugging information to the coreboot cbmem console buffer. - Needs CONFIG_CONSOLE_CBMEM in coreboot. You can read the log - after boot using 'cbmem -c'. Only 32bit code (basically every- - thing before booting the OS) writes to the log buffer. - -endmenu diff --git a/payloads/external/SeaBIOS/src/apm.c b/payloads/external/SeaBIOS/src/apm.c deleted file mode 100644 index f7c2306c..00000000 --- a/payloads/external/SeaBIOS/src/apm.c +++ /dev/null @@ -1,215 +0,0 @@ -// Basic support for apmbios callbacks. -// -// Copyright (C) 2008 Kevin O'Connor <kevin@koconnor.net> -// Copyright (C) 2005 Struan Bartlett -// Copyright (C) 2004 Fabrice Bellard -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "biosvar.h" // GET_GLOBAL -#include "bregs.h" // struct bregs -#include "config.h" // CONFIG_* -#include "output.h" // dprintf -#include "stacks.h" // yield_toirq -#include "util.h" // apm_shutdown -#include "x86.h" // outb - -// APM installation check -static void -handle_155300(struct bregs *regs) -{ - regs->ah = 1; // APM major version - regs->al = 2; // APM minor version - regs->bh = 'P'; - regs->bl = 'M'; - // bit 0 : 16 bit interface supported - // bit 1 : 32 bit interface supported - regs->cx = 0x03; - set_success(regs); -} - -// APM real mode interface connect -static void -handle_155301(struct bregs *regs) -{ - set_success(regs); -} - -// APM 16 bit protected mode interface connect -static void -handle_155302(struct bregs *regs) -{ - extern void entry_apm16(void); - regs->bx = (u32)entry_apm16; - regs->ax = SEG_BIOS; // 16 bit code segment base - regs->si = 0xfff0; // 16 bit code segment size - regs->cx = SEG_BIOS; // data segment address - regs->di = 0xfff0; // data segment length - set_success(regs); -} - -// APM 32 bit protected mode interface connect -static void -handle_155303(struct bregs *regs) -{ - extern void entry_apm32(void); - regs->ax = SEG_BIOS; // 32 bit code segment base - regs->ebx = (u32)entry_apm32; - regs->cx = SEG_BIOS; // 16 bit code segment base - // 32 bit code segment size (low 16 bits) - // 16 bit code segment size (high 16 bits) - regs->esi = 0xfff0fff0; - regs->dx = SEG_BIOS; // data segment address - regs->di = 0xfff0; // data segment length - set_success(regs); -} - -// APM interface disconnect -static void -handle_155304(struct bregs *regs) -{ - set_success(regs); -} - -// APM cpu idle -static void -handle_155305(struct bregs *regs) -{ - yield_toirq(); - set_success(regs); -} - -// APM cpu busy -static void -handle_155306(struct bregs *regs) -{ - set_success(regs); -} - -void -apm_shutdown(void) -{ - u16 pm1a_cnt = GET_GLOBAL(acpi_pm1a_cnt); - if (pm1a_cnt) - outw(0x2000, pm1a_cnt); - - irq_disable(); - for (;;) - hlt(); -} - -// APM Set Power State -static void -handle_155307(struct bregs *regs) -{ - if (regs->bx != 1) { - set_success(regs); - return; - } - switch (regs->cx) { - case 1: - dprintf(1, "APM standby request\n"); - break; - case 2: - dprintf(1, "APM suspend request\n"); - break; - case 3: - apm_shutdown(); - break; - } - set_success(regs); -} - -static void -handle_155308(struct bregs *regs) -{ - set_success(regs); -} - -// Get Power Status -static void -handle_15530a(struct bregs *regs) -{ - regs->bh = 0x01; // on line - regs->bl = 0xff; // unknown battery status - regs->ch = 0x80; // no system battery - regs->cl = 0xff; // unknown remaining time - regs->dx = 0xffff; // unknown remaining time - regs->si = 0x00; // zero battery - set_success(regs); -} - -#define RET_ENOEVENT 0x80 - -// Get PM Event -static void -handle_15530b(struct bregs *regs) -{ - set_code_invalid_silent(regs, RET_ENOEVENT); -} - -// APM Driver Version -static void -handle_15530e(struct bregs *regs) -{ - regs->ah = 1; - regs->al = 2; - set_success(regs); -} - -// APM Engage / Disengage -static void -handle_15530f(struct bregs *regs) -{ - set_success(regs); -} - -// APM Get Capabilities -static void -handle_155310(struct bregs *regs) -{ - regs->bl = 0; - regs->cx = 0; - set_success(regs); -} - -static void -handle_1553XX(struct bregs *regs) -{ - set_unimplemented(regs); -} - -void -handle_1553(struct bregs *regs) -{ - if (! CONFIG_APMBIOS) { - set_code_invalid(regs, RET_EUNSUPPORTED); - return; - } - - //debug_stub(regs); - switch (regs->al) { - case 0x00: handle_155300(regs); break; - case 0x01: handle_155301(regs); break; - case 0x02: handle_155302(regs); break; - case 0x03: handle_155303(regs); break; - case 0x04: handle_155304(regs); break; - case 0x05: handle_155305(regs); break; - case 0x06: handle_155306(regs); break; - case 0x07: handle_155307(regs); break; - case 0x08: handle_155308(regs); break; - case 0x0a: handle_15530a(regs); break; - case 0x0b: handle_15530b(regs); break; - case 0x0e: handle_15530e(regs); break; - case 0x0f: handle_15530f(regs); break; - case 0x10: handle_155310(regs); break; - default: handle_1553XX(regs); break; - } -} - -void VISIBLE16 VISIBLE32SEG -handle_apm(struct bregs *regs) -{ - debug_enter(regs, DEBUG_HDL_apm); - handle_1553(regs); -} diff --git a/payloads/external/SeaBIOS/src/asm-offsets.c b/payloads/external/SeaBIOS/src/asm-offsets.c deleted file mode 100644 index b98f3b5a..00000000 --- a/payloads/external/SeaBIOS/src/asm-offsets.c +++ /dev/null @@ -1,23 +0,0 @@ -// Generate assembler offsets. - -#include "gen-defs.h" // OFFSET -#include "bregs.h" // struct bregs - -/* workaround for a warning with -Wmissing-prototypes */ -void foo(void) VISIBLE16; - -void foo(void) -{ - COMMENT("BREGS"); - OFFSET(BREGS_es, bregs, es); - OFFSET(BREGS_ds, bregs, ds); - OFFSET(BREGS_eax, bregs, eax); - OFFSET(BREGS_ebx, bregs, ebx); - OFFSET(BREGS_ecx, bregs, ecx); - OFFSET(BREGS_edx, bregs, edx); - OFFSET(BREGS_ebp, bregs, ebp); - OFFSET(BREGS_esi, bregs, esi); - OFFSET(BREGS_edi, bregs, edi); - OFFSET(BREGS_flags, bregs, flags); - OFFSET(BREGS_code, bregs, code); -} diff --git a/payloads/external/SeaBIOS/src/biosvar.h b/payloads/external/SeaBIOS/src/biosvar.h deleted file mode 100644 index f61fb6a5..00000000 --- a/payloads/external/SeaBIOS/src/biosvar.h +++ /dev/null @@ -1,130 +0,0 @@ -// Memory access to BIOS variables. -// -// Copyright (C) 2008-2013 Kevin O'Connor <kevin@koconnor.net> -// -// This file may be distributed under the terms of the GNU LGPLv3 license. -#ifndef __BIOSVAR_H -#define __BIOSVAR_H - -#include "config.h" // SEG_BDA -#include "farptr.h" // GET_FARVAR -#include "memmap.h" // SYMBOL -#include "std/bda.h" // struct bios_data_area_s - - -/**************************************************************** - * Interrupt vector table - ****************************************************************/ - -#define GET_IVT(vector) \ - GET_FARVAR(SEG_IVT, ((struct rmode_IVT *)0)->ivec[vector]) -#define SET_IVT(vector, segoff) \ - SET_FARVAR(SEG_IVT, ((struct rmode_IVT *)0)->ivec[vector], segoff) - -#define FUNC16(func) ({ \ - ASSERT32FLAT(); \ - extern void func (void); \ - SEGOFF(SEG_BIOS, (u32)func - BUILD_BIOS_ADDR); \ - }) - - -/**************************************************************** - * Bios Data Area (BDA) - ****************************************************************/ - -// Accessor functions -#define GET_BDA(var) \ - GET_FARVAR(SEG_BDA, ((struct bios_data_area_s *)0)->var) -#define SET_BDA(var, val) \ - SET_FARVAR(SEG_BDA, ((struct bios_data_area_s *)0)->var, (val)) - -// Helper function to set the bits of the equipment_list_flags variable. -static inline void set_equipment_flags(u16 clear, u16 set) { - u16 eqf = GET_BDA(equipment_list_flags); - SET_BDA(equipment_list_flags, (eqf & ~clear) | set); -} - - -/**************************************************************** - * Extended Bios Data Area (EBDA) - ****************************************************************/ - -// The initial size and location of EBDA -#define EBDA_SIZE_START \ - DIV_ROUND_UP(sizeof(struct extended_bios_data_area_s), 1024) -#define EBDA_SEGMENT_START \ - FLATPTR_TO_SEG(BUILD_LOWRAM_END - EBDA_SIZE_START*1024) - -// Accessor functions -static inline u16 get_ebda_seg(void) { - return GET_BDA(ebda_seg); -} -static inline struct extended_bios_data_area_s * -get_ebda_ptr(void) -{ - ASSERT32FLAT(); - return MAKE_FLATPTR(get_ebda_seg(), 0); -} -#define GET_EBDA(eseg, var) \ - GET_FARVAR(eseg, ((struct extended_bios_data_area_s *)0)->var) -#define SET_EBDA(eseg, var, val) \ - SET_FARVAR(eseg, ((struct extended_bios_data_area_s *)0)->var, (val)) - - -/**************************************************************** - * Global variables - ****************************************************************/ - -#if MODE16 == 0 && MODESEGMENT == 1 -// In 32bit segmented mode %cs may not be readable and the code may be -// relocated. The entry code sets up %gs with a readable segment and -// the code offset can be determined by get_global_offset(). -#define GLOBAL_SEGREG GS -static inline u32 __attribute_const get_global_offset(void) { - u32 ret; - asm(" calll 1f\n" - "1:popl %0\n" - " subl $1b, %0" - : "=r"(ret)); - return ret; -} -#else -#define GLOBAL_SEGREG CS -static inline u32 __attribute_const get_global_offset(void) { - return 0; -} -#endif -static inline u16 get_global_seg(void) { - return GET_SEG(GLOBAL_SEGREG); -} -#define GET_GLOBAL(var) \ - GET_VAR(GLOBAL_SEGREG, *(typeof(&(var)))((void*)&(var) \ - + get_global_offset())) -#if MODESEGMENT -#define GLOBALFLAT2GLOBAL(var) ((typeof(var))((void*)(var) - BUILD_BIOS_ADDR)) -#else -#define GLOBALFLAT2GLOBAL(var) (var) -#endif -// Access a "flat" pointer known to point to the f-segment. -#define GET_GLOBALFLAT(var) GET_GLOBAL(*GLOBALFLAT2GLOBAL(&(var))) - - -/**************************************************************** - * "Low" memory variables - ****************************************************************/ - -#define SEG_LOW SYMBOL(_zonelow_seg) - -#if MODESEGMENT -#define GET_LOW(var) GET_FARVAR(SEG_LOW, (var)) -#define SET_LOW(var, val) SET_FARVAR(SEG_LOW, (var), (val)) -#define LOWFLAT2LOW(var) ((typeof(var))((void*)(var) - SYMBOL(zonelow_base))) -#else -#define GET_LOW(var) (var) -#define SET_LOW(var, val) do { (var) = (val); } while (0) -#define LOWFLAT2LOW(var) (var) -#endif -#define GET_LOWFLAT(var) GET_LOW(*LOWFLAT2LOW(&(var))) -#define SET_LOWFLAT(var, val) SET_LOW(*LOWFLAT2LOW(&(var)), (val)) - -#endif // __BIOSVAR_H diff --git a/payloads/external/SeaBIOS/src/block.c b/payloads/external/SeaBIOS/src/block.c deleted file mode 100644 index 1f600b85..00000000 --- a/payloads/external/SeaBIOS/src/block.c +++ /dev/null @@ -1,639 +0,0 @@ -// Disk setup and access -// -// Copyright (C) 2008,2009 Kevin O'Connor <kevin@koconnor.net> -// Copyright (C) 2002 MandrakeSoft S.A. -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "biosvar.h" // GET_GLOBAL -#include "block.h" // process_op -#include "hw/ata.h" // process_ata_op -#include "hw/ahci.h" // process_ahci_op -#include "hw/esp-scsi.h" // esp_scsi_process_op -#include "hw/lsi-scsi.h" // lsi_scsi_process_op -#include "hw/megasas.h" // megasas_process_op -#include "hw/mpt-scsi.h" // mpt_scsi_process_op -#include "hw/pci.h" // pci_bdf_to_bus -#include "hw/pvscsi.h" // pvscsi_process_op -#include "hw/rtc.h" // rtc_read -#include "hw/usb-msc.h" // usb_process_op -#include "hw/usb-uas.h" // uas_process_op -#include "hw/virtio-blk.h" // process_virtio_blk_op -#include "hw/virtio-scsi.h" // virtio_scsi_process_op -#include "hw/nvme.h" // nvme_process_op -#include "malloc.h" // malloc_low -#include "output.h" // dprintf -#include "stacks.h" // call32 -#include "std/disk.h" // struct dpte_s -#include "string.h" // checksum -#include "util.h" // process_floppy_op - -u8 FloppyCount VARFSEG; -u8 CDCount; -struct drive_s *IDMap[3][BUILD_MAX_EXTDRIVE] VARFSEG; -u8 *bounce_buf_fl VARFSEG; - -struct drive_s * -getDrive(u8 exttype, u8 extdriveoffset) -{ - if (extdriveoffset >= ARRAY_SIZE(IDMap[0])) - return NULL; - return GET_GLOBAL(IDMap[exttype][extdriveoffset]); -} - -int getDriveId(u8 exttype, struct drive_s *drive) -{ - ASSERT32FLAT(); - int i; - for (i = 0; i < ARRAY_SIZE(IDMap[0]); i++) - if (getDrive(exttype, i) == drive) - return i; - return -1; -} - -int create_bounce_buf(void) -{ - if (bounce_buf_fl) - return 0; - - u8 *buf = malloc_low(CDROM_SECTOR_SIZE); - if (!buf) { - warn_noalloc(); - return -1; - } - bounce_buf_fl = buf; - return 0; -} - -/**************************************************************** - * Disk geometry translation - ****************************************************************/ - -static int -host_lchs_supplied(struct drive_s *drive) -{ - return (drive->lchs.head <= 255 && - drive->lchs.sector > 0 && drive->lchs.sector <= 63); -} - -static u8 -get_translation(struct drive_s *drive) -{ - if (host_lchs_supplied(drive)) - return TRANSLATION_HOST; - u8 type = drive->type; - if (CONFIG_QEMU && type == DTYPE_ATA) { - // Emulators pass in the translation info via nvram. - u8 translation = rtc_read(CMOS_BIOS_DISKTRANSFLAG + drive->cntl_id/4); - translation >>= 2 * (drive->cntl_id % 4); - translation &= 0x03; - return translation; - } - - // Otherwise use a heuristic to determine translation type. - u16 heads = drive->pchs.head; - u16 cylinders = drive->pchs.cylinder; - u16 spt = drive->pchs.sector; - u64 sectors = drive->sectors; - u64 psectors = (u64)heads * cylinders * spt; - if (!heads || !cylinders || !spt || psectors > sectors) - // pchs doesn't look valid - use LBA. - return TRANSLATION_LBA; - - if (cylinders <= 1024 && heads <= 16 && spt <= 63) - return TRANSLATION_NONE; - if (cylinders * heads <= 131072) - return TRANSLATION_LARGE; - return TRANSLATION_LBA; -} - -static void -setup_translation(struct drive_s *drive) -{ - u8 translation = get_translation(drive); - drive->translation = translation; - - u16 heads = drive->pchs.head ; - u16 cylinders = drive->pchs.cylinder; - u16 spt = drive->pchs.sector; - u64 sectors = drive->sectors; - const char *desc = NULL; - - switch (translation) { - default: - case TRANSLATION_NONE: - desc = "none"; - break; - case TRANSLATION_LBA: - desc = "lba"; - spt = 63; - if (sectors > 63*255*1024) { - heads = 255; - cylinders = 1024; - break; - } - u32 sect = (u32)sectors / 63; - heads = sect / 1024; - if (heads>128) - heads = 255; - else if (heads>64) - heads = 128; - else if (heads>32) - heads = 64; - else if (heads>16) - heads = 32; - else - heads = 16; - cylinders = sect / heads; - break; - case TRANSLATION_RECHS: - desc = "r-echs"; - // Take care not to overflow - if (heads==16) { - if (cylinders>61439) - cylinders=61439; - heads=15; - cylinders = (u16)((u32)(cylinders)*16/15); - } - // then go through the large bitshift process - case TRANSLATION_LARGE: - if (translation == TRANSLATION_LARGE) - desc = "large"; - while (cylinders > 1024) { - cylinders >>= 1; - heads <<= 1; - - // If we max out the head count - if (heads > 127) - break; - } - break; - case TRANSLATION_HOST: - desc = "host-supplied"; - cylinders = drive->lchs.cylinder; - heads = drive->lchs.head; - spt = drive->lchs.sector; - break; - } - // clip to 1024 cylinders in lchs - if (cylinders > 1024) - cylinders = 1024; - dprintf(1, "drive %p: PCHS=%u/%d/%d translation=%s LCHS=%d/%d/%d s=%u\n" - , drive - , drive->pchs.cylinder, drive->pchs.head, drive->pchs.sector - , desc - , cylinders, heads, spt - , (u32)sectors); - - drive->lchs.head = heads; - drive->lchs.cylinder = cylinders; - drive->lchs.sector = spt; -} - - -/**************************************************************** - * Drive mapping - ****************************************************************/ - -// Fill in Fixed Disk Parameter Table (located in ebda). -static void -fill_fdpt(struct drive_s *drive, int hdid) -{ - if (hdid > 1) - return; - - u16 nlc = drive->lchs.cylinder; - u16 nlh = drive->lchs.head; - u16 nls = drive->lchs.sector; - - u16 npc = drive->pchs.cylinder; - u16 nph = drive->pchs.head; - u16 nps = drive->pchs.sector; - - struct fdpt_s *fdpt = &get_ebda_ptr()->fdpt[hdid]; - fdpt->precompensation = 0xffff; - fdpt->drive_control_byte = 0xc0 | ((nph > 8) << 3); - fdpt->landing_zone = npc; - fdpt->cylinders = nlc; - fdpt->heads = nlh; - fdpt->sectors = nls; - - if (nlc != npc || nlh != nph || nls != nps) { - // Logical mapping present - use extended structure. - - // complies with Phoenix style Translated Fixed Disk Parameter - // Table (FDPT) - fdpt->phys_cylinders = npc; - fdpt->phys_heads = nph; - fdpt->phys_sectors = nps; - fdpt->a0h_signature = 0xa0; - - // Checksum structure. - fdpt->checksum -= checksum(fdpt, sizeof(*fdpt)); - } - - if (hdid == 0) - SET_IVT(0x41, SEGOFF(get_ebda_seg(), offsetof( - struct extended_bios_data_area_s, fdpt[0]))); - else - SET_IVT(0x46, SEGOFF(get_ebda_seg(), offsetof( - struct extended_bios_data_area_s, fdpt[1]))); -} - -// Find spot to add a drive -static void -add_drive(struct drive_s **idmap, u8 *count, struct drive_s *drive) -{ - if (*count >= ARRAY_SIZE(IDMap[0])) { - warn_noalloc(); - return; - } - idmap[*count] = drive; - *count = *count + 1; -} - -// Map a hard drive -void -map_hd_drive(struct drive_s *drive) -{ - ASSERT32FLAT(); - struct bios_data_area_s *bda = MAKE_FLATPTR(SEG_BDA, 0); - int hdid = bda->hdcount; - dprintf(3, "Mapping hd drive %p to %d\n", drive, hdid); - add_drive(IDMap[EXTTYPE_HD], &bda->hdcount, drive); - - // Setup disk geometry translation. - setup_translation(drive); - - // Fill "fdpt" structure. - fill_fdpt(drive, hdid); -} - -// Map a cd -void -map_cd_drive(struct drive_s *drive) -{ - ASSERT32FLAT(); - dprintf(3, "Mapping cd drive %p\n", drive); - add_drive(IDMap[EXTTYPE_CD], &CDCount, drive); -} - -// Map a floppy -void -map_floppy_drive(struct drive_s *drive) -{ - ASSERT32FLAT(); - dprintf(3, "Mapping floppy drive %p\n", drive); - add_drive(IDMap[EXTTYPE_FLOPPY], &FloppyCount, drive); - - // Update equipment word bits for floppy - if (FloppyCount == 1) { - // 1 drive, ready for boot - set_equipment_flags(0x41, 0x01); - SET_BDA(floppy_harddisk_info, 0x07); - } else if (FloppyCount >= 2) { - // 2 drives, ready for boot - set_equipment_flags(0x41, 0x41); - SET_BDA(floppy_harddisk_info, 0x77); - } -} - - -/**************************************************************** - * Extended Disk Drive (EDD) get drive parameters - ****************************************************************/ - -// flags for bus_iface field in fill_generic_edd() -#define EDD_ISA 0x01 -#define EDD_PCI 0x02 -#define EDD_BUS_MASK 0x0f -#define EDD_ATA 0x10 -#define EDD_SCSI 0x20 -#define EDD_IFACE_MASK 0xf0 - -// Fill in EDD info -static int -fill_generic_edd(struct segoff_s edd, struct drive_s *drive_fl - , u32 dpte_so, u8 bus_iface, u32 iface_path, u32 device_path) -{ - u16 seg = edd.seg; - struct int13dpt_s *param_far = (void*)(edd.offset+0); - u16 size = GET_FARVAR(seg, param_far->size); - u16 t13 = size == 74; - - // Buffer is too small - if (size < 26) - return DISK_RET_EPARAM; - - // EDD 1.x - - u8 type = GET_FLATPTR(drive_fl->type); - u16 npc = GET_FLATPTR(drive_fl->pchs.cylinder); - u16 nph = GET_FLATPTR(drive_fl->pchs.head); - u16 nps = GET_FLATPTR(drive_fl->pchs.sector); - u64 lba = GET_FLATPTR(drive_fl->sectors); - u16 blksize = GET_FLATPTR(drive_fl->blksize); - - dprintf(DEBUG_HDL_13, "disk_1348 size=%d t=%d chs=%d,%d,%d lba=%d bs=%d\n" - , size, type, npc, nph, nps, (u32)lba, blksize); - - SET_FARVAR(seg, param_far->size, 26); - if (lba == (u64)-1) { - // 0x74 = removable, media change, lockable, max values - SET_FARVAR(seg, param_far->infos, 0x74); - SET_FARVAR(seg, param_far->cylinders, 0xffffffff); - SET_FARVAR(seg, param_far->heads, 0xffffffff); - SET_FARVAR(seg, param_far->spt, 0xffffffff); - } else { - if (lba > (u64)nps*nph*0x3fff) { - SET_FARVAR(seg, param_far->infos, 0x00); // geometry is invalid - SET_FARVAR(seg, param_far->cylinders, 0x3fff); - } else { - SET_FARVAR(seg, param_far->infos, 0x02); // geometry is valid - SET_FARVAR(seg, param_far->cylinders, (u32)npc); - } - SET_FARVAR(seg, param_far->heads, (u32)nph); - SET_FARVAR(seg, param_far->spt, (u32)nps); - } - SET_FARVAR(seg, param_far->sector_count, lba); - SET_FARVAR(seg, param_far->blksize, blksize); - - if (size < 30 || !dpte_so) - return DISK_RET_SUCCESS; - - // EDD 2.x - - SET_FARVAR(seg, param_far->size, 30); - SET_FARVAR(seg, param_far->dpte.segoff, dpte_so); - - if (size < 66 || !bus_iface) - return DISK_RET_SUCCESS; - - // EDD 3.x - SET_FARVAR(seg, param_far->key, 0xbedd); - SET_FARVAR(seg, param_far->dpi_length, t13 ? 44 : 36); - SET_FARVAR(seg, param_far->reserved1, 0); - SET_FARVAR(seg, param_far->reserved2, 0); - - const char *host_bus = "ISA "; - if ((bus_iface & EDD_BUS_MASK) == EDD_PCI) { - host_bus = "PCI "; - if (!t13) - // Phoenix v3 spec (pre t13) did not define the PCI channel field - iface_path &= 0x00ffffff; - } - memcpy_far(seg, param_far->host_bus, SEG_BIOS, host_bus - , sizeof(param_far->host_bus)); - SET_FARVAR(seg, param_far->iface_path, iface_path); - - const char *iface_type = "ATA "; - if ((bus_iface & EDD_IFACE_MASK) == EDD_SCSI) - iface_type = "SCSI "; - memcpy_far(seg, param_far->iface_type, SEG_BIOS, iface_type - , sizeof(param_far->iface_type)); - if (t13) { - SET_FARVAR(seg, param_far->t13.device_path[0], device_path); - SET_FARVAR(seg, param_far->t13.device_path[1], 0); - - SET_FARVAR(seg, param_far->t13.checksum - , -checksum_far(seg, (void*)param_far+30, 43)); - } else { - SET_FARVAR(seg, param_far->phoenix.device_path, device_path); - - SET_FARVAR(seg, param_far->phoenix.checksum - , -checksum_far(seg, (void*)param_far+30, 35)); - } - - return DISK_RET_SUCCESS; -} - -// Build an EDD "iface_path" field for a PCI device -static u32 -edd_pci_path(u16 bdf, u8 channel) -{ - return (pci_bdf_to_bus(bdf) | (pci_bdf_to_dev(bdf) << 8) - | (pci_bdf_to_fn(bdf) << 16) | ((u32)channel << 24)); -} - -struct dpte_s DefaultDPTE VARLOW; - -// EDD info for ATA and ATAPI drives -static int -fill_ata_edd(struct segoff_s edd, struct drive_s *drive_gf) -{ - if (!CONFIG_ATA) - return DISK_RET_EPARAM; - - // Fill in dpte - struct atadrive_s *adrive_gf = container_of( - drive_gf, struct atadrive_s, drive); - struct ata_channel_s *chan_gf = GET_GLOBALFLAT(adrive_gf->chan_gf); - u8 slave = GET_GLOBALFLAT(adrive_gf->slave); - u16 iobase2 = GET_GLOBALFLAT(chan_gf->iobase2); - u8 irq = GET_GLOBALFLAT(chan_gf->irq); - u16 iobase1 = GET_GLOBALFLAT(chan_gf->iobase1); - int bdf = GET_GLOBALFLAT(chan_gf->pci_bdf); - u8 channel = GET_GLOBALFLAT(chan_gf->chanid); - - u16 options = 0; - if (GET_GLOBALFLAT(drive_gf->type) == DTYPE_ATA) { - u8 translation = GET_GLOBALFLAT(drive_gf->translation); - if ((translation != TRANSLATION_NONE) && - (translation != TRANSLATION_HOST)) { - options |= 1<<3; // CHS translation - if (translation == TRANSLATION_LBA) - options |= 1<<9; - if (translation == TRANSLATION_RECHS) - options |= 3<<9; - } - } else { - // ATAPI - options |= 1<<5; // removable device - options |= 1<<6; // atapi device - } - options |= 1<<4; // lba translation - if (CONFIG_ATA_PIO32) - options |= 1<<7; - - SET_LOW(DefaultDPTE.iobase1, iobase1); - SET_LOW(DefaultDPTE.iobase2, iobase2 + ATA_CB_DC); - SET_LOW(DefaultDPTE.prefix, ((slave ? ATA_CB_DH_DEV1 : ATA_CB_DH_DEV0) - | ATA_CB_DH_LBA)); - SET_LOW(DefaultDPTE.unused, 0xcb); - SET_LOW(DefaultDPTE.irq, irq); - SET_LOW(DefaultDPTE.blkcount, 1); - SET_LOW(DefaultDPTE.dma, 0); - SET_LOW(DefaultDPTE.pio, 0); - SET_LOW(DefaultDPTE.options, options); - SET_LOW(DefaultDPTE.reserved, 0); - SET_LOW(DefaultDPTE.revision, 0x11); - - u8 sum = checksum_far(SEG_LOW, &DefaultDPTE, 15); - SET_LOW(DefaultDPTE.checksum, -sum); - - u32 bustype = EDD_ISA, ifpath = iobase1; - if (bdf >= 0) { - bustype = EDD_PCI; - ifpath = edd_pci_path(bdf, channel); - } - return fill_generic_edd( - edd, drive_gf, SEGOFF(SEG_LOW, (u32)&DefaultDPTE).segoff - , bustype | EDD_ATA, ifpath, slave); -} - -// Fill Extended Disk Drive (EDD) "Get drive parameters" info for a drive -int noinline -fill_edd(struct segoff_s edd, struct drive_s *drive_fl) -{ - switch (GET_FLATPTR(drive_fl->type)) { - case DTYPE_ATA: - case DTYPE_ATA_ATAPI: - return fill_ata_edd(edd, drive_fl); - case DTYPE_VIRTIO_BLK: - case DTYPE_VIRTIO_SCSI: - return fill_generic_edd( - edd, drive_fl, 0xffffffff, EDD_PCI | EDD_SCSI - , edd_pci_path(GET_FLATPTR(drive_fl->cntl_id), 0), 0); - default: - return fill_generic_edd(edd, drive_fl, 0, 0, 0, 0); - } -} - - -/**************************************************************** - * Disk driver dispatch - ****************************************************************/ - -void -block_setup(void) -{ - floppy_setup(); - ata_setup(); - ahci_setup(); - sdcard_setup(); - ramdisk_setup(); - virtio_blk_setup(); - virtio_scsi_setup(); - lsi_scsi_setup(); - esp_scsi_setup(); - megasas_setup(); - pvscsi_setup(); - mpt_scsi_setup(); - nvme_setup(); -} - -// Fallback handler for command requests not implemented by drivers -int -default_process_op(struct disk_op_s *op) -{ - switch (op->command) { - case CMD_FORMAT: - case CMD_RESET: - case CMD_ISREADY: - case CMD_VERIFY: - case CMD_SEEK: - // Return success if the driver doesn't implement these commands - return DISK_RET_SUCCESS; - default: - return DISK_RET_EPARAM; - } -} - -// Command dispatch for disk drivers that run in both 16bit and 32bit mode -static int -process_op_both(struct disk_op_s *op) -{ - switch (GET_FLATPTR(op->drive_fl->type)) { - case DTYPE_ATA_ATAPI: - return ata_atapi_process_op(op); - case DTYPE_USB: - return usb_process_op(op); - case DTYPE_UAS: - return uas_process_op(op); - case DTYPE_LSI_SCSI: - return lsi_scsi_process_op(op); - case DTYPE_ESP_SCSI: - return esp_scsi_process_op(op); - case DTYPE_MEGASAS: - return megasas_process_op(op); - case DTYPE_MPT_SCSI: - return mpt_scsi_process_op(op); - default: - if (!MODESEGMENT) - return DISK_RET_EPARAM; - // In 16bit mode and driver not found - try in 32bit mode - return call32(process_op_32, MAKE_FLATPTR(GET_SEG(SS), op) - , DISK_RET_EPARAM); - } -} - -// Command dispatch for disk drivers that only run in 32bit mode -int VISIBLE32FLAT -process_op_32(struct disk_op_s *op) -{ - ASSERT32FLAT(); - switch (op->drive_fl->type) { - case DTYPE_VIRTIO_BLK: - return virtio_blk_process_op(op); - case DTYPE_AHCI: - return ahci_process_op(op); - case DTYPE_AHCI_ATAPI: - return ahci_atapi_process_op(op); - case DTYPE_SDCARD: - return sdcard_process_op(op); - case DTYPE_USB_32: - return usb_process_op(op); - case DTYPE_UAS_32: - return uas_process_op(op); - case DTYPE_VIRTIO_SCSI: - return virtio_scsi_process_op(op); - case DTYPE_PVSCSI: - return pvscsi_process_op(op); - case DTYPE_NVME: - return nvme_process_op(op); - default: - return process_op_both(op); - } -} - -// Command dispatch for disk drivers that only run in 16bit mode -static int -process_op_16(struct disk_op_s *op) -{ - ASSERT16(); - switch (GET_FLATPTR(op->drive_fl->type)) { - case DTYPE_FLOPPY: - return floppy_process_op(op); - case DTYPE_ATA: - return ata_process_op(op); - case DTYPE_RAMDISK: - return ramdisk_process_op(op); - case DTYPE_CDEMU: - return cdemu_process_op(op); - default: - return process_op_both(op); - } -} - -// Execute a disk_op_s request. -int -process_op(struct disk_op_s *op) -{ - dprintf(DEBUG_HDL_13, "disk_op d=%p lba=%d buf=%p count=%d cmd=%d\n" - , op->drive_fl, (u32)op->lba, op->buf_fl - , op->count, op->command); - - int ret, origcount = op->count; - if (origcount * GET_FLATPTR(op->drive_fl->blksize) > 64*1024) { - op->count = 0; - return DISK_RET_EBOUNDARY; - } - if (MODESEGMENT) - ret = process_op_16(op); - else - ret = process_op_32(op); - if (ret && op->count == origcount) - // If the count hasn't changed on error, assume no data transferred. - op->count = 0; - return ret; -} diff --git a/payloads/external/SeaBIOS/src/block.h b/payloads/external/SeaBIOS/src/block.h deleted file mode 100644 index c1b8d734..00000000 --- a/payloads/external/SeaBIOS/src/block.h +++ /dev/null @@ -1,122 +0,0 @@ -#ifndef __BLOCK_H -#define __BLOCK_H - -#include "types.h" // u32 - - -/**************************************************************** - * Disk command request - ****************************************************************/ - -struct disk_op_s { - void *buf_fl; - struct drive_s *drive_fl; - u8 command; - u16 count; - union { - // Commands: READ, WRITE, VERIFY, SEEK, FORMAT - u64 lba; - // Commands: SCSI - struct { - u16 blocksize; - void *cdbcmd; - }; - }; -}; - -#define CMD_RESET 0x00 -#define CMD_READ 0x02 -#define CMD_WRITE 0x03 -#define CMD_VERIFY 0x04 -#define CMD_FORMAT 0x05 -#define CMD_SEEK 0x07 -#define CMD_ISREADY 0x10 -#define CMD_SCSI 0x20 - - -/**************************************************************** - * Global storage - ****************************************************************/ - -struct chs_s { - u16 head; - u16 cylinder; - u16 sector; - u16 pad; -}; - -struct drive_s { - u8 type; // Driver type (DTYPE_*) - u8 floppy_type; // Type of floppy (only for floppy drives). - struct chs_s lchs; // Logical CHS - u64 sectors; // Total sectors count - u32 cntl_id; // Unique id for a given driver type. - u8 removable; // Is media removable (currently unused) - - // Info for EDD calls - u8 translation; // type of translation - u16 blksize; // block size - struct chs_s pchs; // Physical CHS -}; - -#define DISK_SECTOR_SIZE 512 -#define CDROM_SECTOR_SIZE 2048 - -#define DTYPE_NONE 0x00 -#define DTYPE_FLOPPY 0x10 -#define DTYPE_ATA 0x20 -#define DTYPE_ATA_ATAPI 0x21 -#define DTYPE_RAMDISK 0x30 -#define DTYPE_CDEMU 0x40 -#define DTYPE_AHCI 0x50 -#define DTYPE_AHCI_ATAPI 0x51 -#define DTYPE_VIRTIO_SCSI 0x60 -#define DTYPE_VIRTIO_BLK 0x61 -#define DTYPE_USB 0x70 -#define DTYPE_USB_32 0x71 -#define DTYPE_UAS 0x72 -#define DTYPE_UAS_32 0x73 -#define DTYPE_LSI_SCSI 0x80 -#define DTYPE_ESP_SCSI 0x81 -#define DTYPE_MEGASAS 0x82 -#define DTYPE_PVSCSI 0x83 -#define DTYPE_MPT_SCSI 0x84 -#define DTYPE_SDCARD 0x90 -#define DTYPE_NVME 0x91 - -#define MAXDESCSIZE 80 - -#define TRANSLATION_NONE 0 -#define TRANSLATION_LBA 1 -#define TRANSLATION_LARGE 2 -#define TRANSLATION_RECHS 3 -#define TRANSLATION_HOST 4 - -#define EXTTYPE_FLOPPY 0 -#define EXTTYPE_HD 1 -#define EXTTYPE_CD 2 - -#define EXTSTART_HD 0x80 -#define EXTSTART_CD 0xE0 - - -/**************************************************************** - * Function defs - ****************************************************************/ - -// block.c -extern u8 FloppyCount, CDCount; -extern u8 *bounce_buf_fl; -struct drive_s *getDrive(u8 exttype, u8 extdriveoffset); -int getDriveId(u8 exttype, struct drive_s *drive); -void map_floppy_drive(struct drive_s *drive); -void map_hd_drive(struct drive_s *drive); -void map_cd_drive(struct drive_s *drive); -struct int13dpt_s; -int fill_edd(struct segoff_s edd, struct drive_s *drive_fl); -void block_setup(void); -int default_process_op(struct disk_op_s *op); -int process_op(struct disk_op_s *op); -int create_bounce_buf(void); - -#endif // block.h diff --git a/payloads/external/SeaBIOS/src/bmp.c b/payloads/external/SeaBIOS/src/bmp.c deleted file mode 100644 index fecc2953..00000000 --- a/payloads/external/SeaBIOS/src/bmp.c +++ /dev/null @@ -1,116 +0,0 @@ -/* -* Basic BMP data process and Raw picture data handle functions. -* Could be used to adjust pixel data format, get information, etc. -* -* Copyright (C) 2011 Wayne Xia <xiawenc@cn.ibm.com> -* -* This work is licensed under the terms of the GNU LGPLv3. -*/ -#include "malloc.h" // malloc_tmphigh -#include "string.h" // memcpy -#include "util.h" // struct bmp_decdata - -struct bmp_decdata { - struct tagRGBQUAD *quadp; - unsigned char *datap; - int width; - int height; - int bpp; -}; - -#define bmp_load4byte(addr) (*(u32 *)(addr)) -#define bmp_load2byte(addr) (*(u16 *)(addr)) - -typedef struct tagBITMAPFILEHEADER { - u8 bfType[2]; - u8 bfSize[4]; - u8 bfReserved1[2]; - u8 bfReserved2[2]; - u8 bfOffBits[4]; -} BITMAPFILEHEADER, tagBITMAPFILEHEADER; - -typedef struct tagBITMAPINFOHEADER { - u8 biSize[4]; - u8 biWidth[4]; - u8 biHeight[4]; - u8 biPlanes[2]; - u8 biBitCount[2]; - u8 biCompression[4]; - u8 biSizeImage[4]; - u8 biXPelsPerMeter[4]; - u8 biYPelsPerMeter[4]; - u8 biClrUsed[4]; - u8 biClrImportant[4]; -} BITMAPINFOHEADER, tagBITMAPINFOHEADER; - -typedef struct tagRGBQUAD { - u8 rgbBlue; - u8 rgbGreen; - u8 rgbRed; - u8 rgbReserved; -} RGBQUAD, tagRGBQUAD; - -/* flat picture data adjusting function -* description: -* switch the vertical line sequence -* arrange horizontal pixel data, add extra space in the dest buffer -* for every line -*/ -static void raw_data_format_adjust(u8 *src, u8 *dest, int width, - int height, int bytes_per_line_src, int bytes_per_line_dest) -{ - int i; - for (i = 0 ; i < height ; i++) { - memcpy(dest + i * bytes_per_line_dest, - src + (height - 1 - i) * bytes_per_line_src, bytes_per_line_src); - } -} - -/* allocate decdata struct */ -struct bmp_decdata *bmp_alloc(void) -{ - struct bmp_decdata *bmp = malloc_tmphigh(sizeof(*bmp)); - return bmp; -} - -/* extract information from bmp file data */ -int bmp_decode(struct bmp_decdata *bmp, unsigned char *data, int data_size) -{ - if (data_size < 54) - return 1; - - u16 bmp_filehead = bmp_load2byte(data + 0); - if (bmp_filehead != 0x4d42) - return 2; - u32 bmp_recordsize = bmp_load4byte(data + 2); - if (bmp_recordsize != data_size) - return 3; - u32 bmp_dataoffset = bmp_load4byte(data + 10); - bmp->datap = (unsigned char *)data + bmp_dataoffset; - bmp->width = bmp_load4byte(data + 18); - bmp->height = bmp_load4byte(data + 22); - bmp->bpp = bmp_load2byte(data + 28); - return 0; -} - -/* get bmp properties */ -void bmp_get_info(struct bmp_decdata *bmp, int *width, int *height, int *bpp) -{ - *width = bmp->width; - *height = bmp->height; - *bpp = bmp->bpp; -} - -/* flush flat picture data to *pc */ -int bmp_show(struct bmp_decdata *bmp, unsigned char *pic, int width, - int height, int depth, int bytes_per_line_dest) -{ - if (bmp->datap == pic) - return 0; - if ((depth == bmp->bpp) && (bmp->bpp%8 == 0)) { - raw_data_format_adjust(bmp->datap, pic, width, height, - (bmp->bpp/8)*width, bytes_per_line_dest); - return 0; - } - return 1; -} diff --git a/payloads/external/SeaBIOS/src/boot.c b/payloads/external/SeaBIOS/src/boot.c deleted file mode 100644 index 1effd802..00000000 --- a/payloads/external/SeaBIOS/src/boot.c +++ /dev/null @@ -1,1043 +0,0 @@ -// Code to load disk image and start system boot. -// -// Copyright (C) 2008-2013 Kevin O'Connor <kevin@koconnor.net> -// Copyright (C) 2002 MandrakeSoft S.A. -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "block.h" // struct drive_s -#include "bregs.h" // struct bregs -#include "config.h" // CONFIG_* -#include "fw/paravirt.h" // qemu_cfg_show_boot_menu -#include "hw/pci.h" // pci_bdf_to_* -#include "hw/pcidevice.h" // struct pci_device -#include "hw/rtc.h" // rtc_read -#include "hw/usb.h" // struct usbdevice_s -#include "list.h" // hlist_node -#include "malloc.h" // free -#include "output.h" // dprintf -#include "romfile.h" // romfile_loadint -#include "std/disk.h" // struct mbr_s -#include "string.h" // memset -#include "util.h" // irqtimer_calc -#include "tcgbios.h" // tpm_* - -/**************************************************************** - * Helper search functions - ****************************************************************/ - -// See if 'str' starts with 'glob' - if glob contains an '*' character -// it will match any number of characters in str that aren't a '/' or -// the next glob character. -static char * -glob_prefix(const char *glob, const char *str) -{ - for (;;) { - if (!*glob && (!*str || *str == '/')) - return (char*)str; - if (*glob == '*') { - if (!*str || *str == '/' || *str == glob[1]) - glob++; - else - str++; - continue; - } - if (*glob != *str) - return NULL; - glob++; - str++; - } -} - -#define FW_PCI_DOMAIN "/pci@i0cf8" - -static char * -build_pci_path(char *buf, int max, const char *devname, struct pci_device *pci) -{ - // Build the string path of a bdf - for example: /pci@i0cf8/isa@1,2 - char *p = buf; - if (pci->parent) { - p = build_pci_path(p, max, "pci-bridge", pci->parent); - } else { - p += snprintf(p, buf+max-p, "%s", FW_PCI_DOMAIN); - if (pci->rootbus) - p += snprintf(p, buf+max-p, ",%x", pci->rootbus); - } - - int dev = pci_bdf_to_dev(pci->bdf), fn = pci_bdf_to_fn(pci->bdf); - p += snprintf(p, buf+max-p, "/%s@%x", devname, dev); - if (fn) - p += snprintf(p, buf+max-p, ",%x", fn); - return p; -} - -static char * -build_scsi_path(char *buf, int max, - struct pci_device *pci, int target, int lun) -{ - // Build the string path of a scsi drive - for example: - // /pci@i0cf8/scsi@5/channel@0/disk@1,0 - char *p; - p = build_pci_path(buf, max, "*", pci); - p += snprintf(p, buf+max-p, "/*@0/*@%x,%x", target, lun); - return p; -} - -static char * -build_ata_path(char *buf, int max, - struct pci_device *pci, int chanid, int slave) -{ - // Build the string path of an ata drive - for example: - // /pci@i0cf8/ide@1,1/drive@1/disk@0 - char *p; - p = build_pci_path(buf, max, "*", pci); - p += snprintf(p, buf+max-p, "/drive@%x/disk@%x", chanid, slave); - return p; -} - - -/**************************************************************** - * Boot device logical geometry - ****************************************************************/ - -typedef struct BootDeviceLCHS { - char *name; - u32 lcyls; - u32 lheads; - u32 lsecs; -} BootDeviceLCHS; - -static BootDeviceLCHS *BiosGeometry VARVERIFY32INIT; -static int BiosGeometryCount; - -static char * -parse_u32(char *cur, u32 *n) -{ - u32 m = 0; - if (cur) { - while ('0' <= *cur && *cur <= '9') { - m = 10 * m + (*cur - '0'); - cur++; - } - if (*cur != '\0') - cur++; - } - *n = m; - return cur; -} - -static void -loadBiosGeometry(void) -{ - if (!CONFIG_HOST_BIOS_GEOMETRY) - return; - char *f = romfile_loadfile("bios-geometry", NULL); - if (!f) - return; - - int i = 0; - BiosGeometryCount = 1; - while (f[i]) { - if (f[i] == '\n') - BiosGeometryCount++; - i++; - } - BiosGeometry = malloc_tmphigh(BiosGeometryCount * sizeof(BootDeviceLCHS)); - if (!BiosGeometry) { - warn_noalloc(); - free(f); - BiosGeometryCount = 0; - return; - } - - dprintf(1, "bios geometry:\n"); - i = 0; - do { - BootDeviceLCHS *d = &BiosGeometry[i]; - d->name = f; - f = strchr(f, '\n'); - if (f) - *(f++) = '\0'; - char *chs_values = strchr(d->name, ' '); - if (chs_values) - *(chs_values++) = '\0'; - chs_values = parse_u32(chs_values, &d->lcyls); - chs_values = parse_u32(chs_values, &d->lheads); - chs_values = parse_u32(chs_values, &d->lsecs); - dprintf(1, "%s: (%u, %u, %u)\n", - d->name, d->lcyls, d->lheads, d->lsecs); - i++; - } while (f); -} - -// Search the bios-geometry list for the given glob pattern. -static BootDeviceLCHS * -boot_lchs_find(const char *glob) -{ - dprintf(1, "Searching bios-geometry for: %s\n", glob); - int i; - for (i = 0; i < BiosGeometryCount; i++) - if (glob_prefix(glob, BiosGeometry[i].name)) - return &BiosGeometry[i]; - return NULL; -} - -int boot_lchs_find_pci_device(struct pci_device *pci, struct chs_s *chs) -{ - if (!CONFIG_HOST_BIOS_GEOMETRY) - return -1; - char desc[256]; - build_pci_path(desc, sizeof(desc), "*", pci); - BootDeviceLCHS *b = boot_lchs_find(desc); - if (!b) - return -1; - chs->cylinder = (u16)b->lcyls; - chs->head = (u16)b->lheads; - chs->sector = (u16)b->lsecs; - return 0; -} - -int boot_lchs_find_scsi_device(struct pci_device *pci, int target, int lun, - struct chs_s *chs) -{ - if (!CONFIG_HOST_BIOS_GEOMETRY) - return -1; - if (!pci) - // support only pci machine for now - return -1; - // Find scsi drive - for example: /pci@i0cf8/scsi@5/channel@0/disk@1,0 - char desc[256]; - build_scsi_path(desc, sizeof(desc), pci, target, lun); - BootDeviceLCHS *b = boot_lchs_find(desc); - if (!b) - return -1; - chs->cylinder = (u16)b->lcyls; - chs->head = (u16)b->lheads; - chs->sector = (u16)b->lsecs; - return 0; -} - -int boot_lchs_find_ata_device(struct pci_device *pci, int chanid, int slave, - struct chs_s *chs) -{ - if (!CONFIG_HOST_BIOS_GEOMETRY) - return -1; - if (!pci) - // support only pci machine for now - return -1; - // Find ata drive - for example: /pci@i0cf8/ide@1,1/drive@1/disk@0 - char desc[256]; - build_ata_path(desc, sizeof(desc), pci, chanid, slave); - BootDeviceLCHS *b = boot_lchs_find(desc); - if (!b) - return -1; - chs->cylinder = (u16)b->lcyls; - chs->head = (u16)b->lheads; - chs->sector = (u16)b->lsecs; - return 0; -} - - -/**************************************************************** - * Boot priority ordering - ****************************************************************/ - -static char **Bootorder VARVERIFY32INIT; -static int BootorderCount; - -static void -loadBootOrder(void) -{ - if (!CONFIG_BOOTORDER) - return; - - char *f = romfile_loadfile("bootorder", NULL); - if (!f) - return; - - int i = 0; - BootorderCount = 1; - while (f[i]) { - if (f[i] == '\n') - BootorderCount++; - i++; - } - Bootorder = malloc_tmphigh(BootorderCount*sizeof(char*)); - if (!Bootorder) { - warn_noalloc(); - free(f); - BootorderCount = 0; - return; - } - - dprintf(1, "boot order:\n"); - i = 0; - do { - Bootorder[i] = f; - f = strchr(f, '\n'); - if (f) - *(f++) = '\0'; - Bootorder[i] = nullTrailingSpace(Bootorder[i]); - dprintf(1, "%d: %s\n", i+1, Bootorder[i]); - i++; - } while (f); -} - -// Search the bootorder list for the given glob pattern. -static int -find_prio(const char *glob) -{ - dprintf(1, "Searching bootorder for: %s\n", glob); - int i; - for (i = 0; i < BootorderCount; i++) - if (glob_prefix(glob, Bootorder[i])) - return i+1; - return -1; -} - -u8 is_bootprio_strict(void) -{ - static int prio_halt = -2; - - if (prio_halt == -2) - prio_halt = find_prio("HALT"); - return prio_halt >= 0; -} - -int bootprio_find_pci_device(struct pci_device *pci) -{ - if (CONFIG_CSM) - return csm_bootprio_pci(pci); - if (!CONFIG_BOOTORDER) - return -1; - // Find pci device - for example: /pci@i0cf8/ethernet@5 - char desc[256]; - build_pci_path(desc, sizeof(desc), "*", pci); - return find_prio(desc); -} - -int bootprio_find_mmio_device(void *mmio) -{ - if (!CONFIG_BOOTORDER) - return -1; - char desc[256]; - snprintf(desc, sizeof(desc), "/virtio-mmio@%016x/*", (u32)mmio); - return find_prio(desc); -} - -int bootprio_find_scsi_device(struct pci_device *pci, int target, int lun) -{ - if (!CONFIG_BOOTORDER) - return -1; - if (!pci) - // support only pci machine for now - return -1; - char desc[256]; - build_scsi_path(desc, sizeof(desc), pci, target, lun); - return find_prio(desc); -} - -int bootprio_find_scsi_mmio_device(void *mmio, int target, int lun) -{ - if (!CONFIG_BOOTORDER) - return -1; - char desc[256]; - snprintf(desc, sizeof(desc), "/virtio-mmio@%016x/*@0/*@%x,%x", - (u32)mmio, target, lun); - return find_prio(desc); -} - -int bootprio_find_ata_device(struct pci_device *pci, int chanid, int slave) -{ - if (CONFIG_CSM) - return csm_bootprio_ata(pci, chanid, slave); - if (!CONFIG_BOOTORDER) - return -1; - if (!pci) - // support only pci machine for now - return -1; - char desc[256]; - build_ata_path(desc, sizeof(desc), pci, chanid, slave); - return find_prio(desc); -} - -int bootprio_find_fdc_device(struct pci_device *pci, int port, int fdid) -{ - if (CONFIG_CSM) - return csm_bootprio_fdc(pci, port, fdid); - if (!CONFIG_BOOTORDER) - return -1; - if (!pci) - // support only pci machine for now - return -1; - // Find floppy - for example: /pci@i0cf8/isa@1/fdc@03f1/floppy@0 - char desc[256], *p; - p = build_pci_path(desc, sizeof(desc), "isa", pci); - snprintf(p, desc+sizeof(desc)-p, "/fdc@%04x/floppy@%x", port, fdid); - return find_prio(desc); -} - -int bootprio_find_pci_rom(struct pci_device *pci, int instance) -{ - if (!CONFIG_BOOTORDER) - return -1; - // Find pci rom - for example: /pci@i0cf8/scsi@3:rom2 - char desc[256], *p; - p = build_pci_path(desc, sizeof(desc), "*", pci); - if (instance) - snprintf(p, desc+sizeof(desc)-p, ":rom%x", instance); - return find_prio(desc); -} - -int bootprio_find_named_rom(const char *name, int instance) -{ - if (!CONFIG_BOOTORDER) - return -1; - // Find named rom - for example: /rom@genroms/linuxboot.bin - char desc[256], *p; - p = desc + snprintf(desc, sizeof(desc), "/rom@%s", name); - if (instance) - snprintf(p, desc+sizeof(desc)-p, ":rom%x", instance); - return find_prio(desc); -} - -static int usb_portmap(struct usbdevice_s *usbdev) -{ - if (usbdev->hub->op->portmap) - return usbdev->hub->op->portmap(usbdev->hub, usbdev->port); - return usbdev->port + 1; -} - -static char * -build_usb_path(char *buf, int max, struct usbhub_s *hub) -{ - if (!hub->usbdev) - // Root hub - nothing to add. - return buf; - char *p = build_usb_path(buf, max, hub->usbdev->hub); - p += snprintf(p, buf+max-p, "/hub@%x", usb_portmap(hub->usbdev)); - return p; -} - -int bootprio_find_usb(struct usbdevice_s *usbdev, int lun) -{ - if (!CONFIG_BOOTORDER) - return -1; - // Find usb - examples: - // pci: /pci@i0cf8/usb@1,2/storage@1/channel@0/disk@0,0 - // mmio: /sysbus-xhci@00000000fe900000/storage@1/channel@0/disk@0,0 - char desc[256], *p; - - if (usbdev->hub->cntl->pci) - p = build_pci_path(desc, sizeof(desc), "usb", usbdev->hub->cntl->pci); - else if (usbdev->hub->cntl->mmio) - p = desc + snprintf(desc, sizeof(desc), "/*@%016x" - , (u32)usbdev->hub->cntl->mmio); - else - return -1; - - p = build_usb_path(p, desc+sizeof(desc)-p, usbdev->hub); - snprintf(p, desc+sizeof(desc)-p, "/storage@%x/*@0/*@0,%x" - , usb_portmap(usbdev), lun); - int ret = find_prio(desc); - if (ret >= 0) - return ret; - // Try usb-host/redir - for example: /pci@i0cf8/usb@1,2/usb-host@1 - snprintf(p, desc+sizeof(desc)-p, "/usb-*@%x", usb_portmap(usbdev)); - return find_prio(desc); -} - - -/**************************************************************** - * Boot setup - ****************************************************************/ - -static int BootRetryTime; -static int CheckFloppySig = 1; - -#define DEFAULT_PRIO 9999 - -static int DefaultFloppyPrio = 101; -static int DefaultCDPrio = 102; -static int DefaultHDPrio = 103; -static int DefaultBEVPrio = 104; - -void -boot_init(void) -{ - if (! CONFIG_BOOT) - return; - - if (CONFIG_QEMU) { - // On emulators, get boot order from nvram. - if (rtc_read(CMOS_BIOS_BOOTFLAG1) & 1) - CheckFloppySig = 0; - u32 bootorder = (rtc_read(CMOS_BIOS_BOOTFLAG2) - | ((rtc_read(CMOS_BIOS_BOOTFLAG1) & 0xf0) << 4)); - DefaultFloppyPrio = DefaultCDPrio = DefaultHDPrio - = DefaultBEVPrio = DEFAULT_PRIO; - int i; - for (i=101; i<104; i++) { - u32 val = bootorder & 0x0f; - bootorder >>= 4; - switch (val) { - case 1: DefaultFloppyPrio = i; break; - case 2: DefaultHDPrio = i; break; - case 3: DefaultCDPrio = i; break; - case 4: DefaultBEVPrio = i; break; - } - } - } - - BootRetryTime = romfile_loadint("etc/boot-fail-wait", 60*1000); - - loadBootOrder(); - loadBiosGeometry(); -} - - -/**************************************************************** - * BootList handling - ****************************************************************/ - -struct bootentry_s { - int type; - union { - u32 data; - struct segoff_s vector; - struct drive_s *drive; - }; - int priority; - const char *description; - struct hlist_node node; -}; -static struct hlist_head BootList VARVERIFY32INIT; - -#define IPL_TYPE_FLOPPY 0x01 -#define IPL_TYPE_HARDDISK 0x02 -#define IPL_TYPE_CDROM 0x03 -#define IPL_TYPE_CBFS 0x20 -#define IPL_TYPE_BEV 0x80 -#define IPL_TYPE_BCV 0x81 -#define IPL_TYPE_HALT 0xf0 - -static void -bootentry_add(int type, int prio, u32 data, const char *desc) -{ - if (! CONFIG_BOOT) - return; - struct bootentry_s *be = malloc_tmp(sizeof(*be)); - if (!be) { - warn_noalloc(); - return; - } - be->type = type; - be->priority = prio; - be->data = data; - be->description = desc ?: "?"; - dprintf(3, "Registering bootable: %s (type:%d prio:%d data:%x)\n" - , be->description, type, prio, data); - - // Add entry in sorted order. - struct hlist_node **pprev; - struct bootentry_s *pos; - hlist_for_each_entry_pprev(pos, pprev, &BootList, node) { - if (be->priority < pos->priority) - break; - if (be->priority > pos->priority) - continue; - if (be->type < pos->type) - break; - if (be->type > pos->type) - continue; - if (be->type <= IPL_TYPE_CDROM - && (be->drive->type < pos->drive->type - || (be->drive->type == pos->drive->type - && be->drive->cntl_id < pos->drive->cntl_id))) - break; - } - hlist_add(&be->node, pprev); -} - -// Return the given priority if it's set - defaultprio otherwise. -static inline int defPrio(int priority, int defaultprio) { - return (priority < 0) ? defaultprio : priority; -} - -// Add a BEV vector for a given pnp compatible option rom. -void -boot_add_bev(u16 seg, u16 bev, u16 desc, int prio) -{ - bootentry_add(IPL_TYPE_BEV, defPrio(prio, DefaultBEVPrio) - , SEGOFF(seg, bev).segoff - , desc ? MAKE_FLATPTR(seg, desc) : "Unknown"); - DefaultBEVPrio = DEFAULT_PRIO; -} - -// Add a bcv entry for an expansion card harddrive or legacy option rom -void -boot_add_bcv(u16 seg, u16 ip, u16 desc, int prio) -{ - bootentry_add(IPL_TYPE_BCV, defPrio(prio, DefaultHDPrio) - , SEGOFF(seg, ip).segoff - , desc ? MAKE_FLATPTR(seg, desc) : "Legacy option rom"); -} - -void -boot_add_floppy(struct drive_s *drive, const char *desc, int prio) -{ - bootentry_add(IPL_TYPE_FLOPPY, defPrio(prio, DefaultFloppyPrio) - , (u32)drive, desc); -} - -void -boot_add_hd(struct drive_s *drive, const char *desc, int prio) -{ - bootentry_add(IPL_TYPE_HARDDISK, defPrio(prio, DefaultHDPrio) - , (u32)drive, desc); -} - -void -boot_add_cd(struct drive_s *drive, const char *desc, int prio) -{ - if (GET_GLOBAL(PlatformRunningOn) & PF_QEMU) { - // We want short boot times. But on physical hardware even - // the test unit ready can take several seconds. So do media - // access on qemu only, where we know it will be fast. - char *extra = cdrom_media_info(drive); - if (extra) { - desc = znprintf(MAXDESCSIZE, "%s (%s)", desc, extra); - free(extra); - } - } - bootentry_add(IPL_TYPE_CDROM, defPrio(prio, DefaultCDPrio) - , (u32)drive, desc); -} - -// Add a CBFS payload entry -void -boot_add_cbfs(void *data, const char *desc, int prio) -{ - bootentry_add(IPL_TYPE_CBFS, defPrio(prio, DEFAULT_PRIO), (u32)data, desc); -} - - -/**************************************************************** - * Keyboard calls - ****************************************************************/ - -// See if a keystroke is pending in the keyboard buffer. -static int -check_for_keystroke(void) -{ - struct bregs br; - memset(&br, 0, sizeof(br)); - br.flags = F_IF|F_ZF; - br.ah = 1; - call16_int(0x16, &br); - return !(br.flags & F_ZF); -} - -// Return a keystroke - waiting forever if necessary. -static int -get_raw_keystroke(void) -{ - struct bregs br; - memset(&br, 0, sizeof(br)); - br.flags = F_IF; - call16_int(0x16, &br); - return br.ax; -} - -// Read a keystroke - waiting up to 'msec' milliseconds. -// returns both scancode and ascii code. -int -get_keystroke_full(int msec) -{ - u32 end = irqtimer_calc(msec); - for (;;) { - if (check_for_keystroke()) - return get_raw_keystroke(); - if (irqtimer_check(end)) - return -1; - yield_toirq(); - } -} - -// Read a keystroke - waiting up to 'msec' milliseconds. -// returns scancode only. -int -get_keystroke(int msec) -{ - int keystroke = get_keystroke_full(msec); - - if (keystroke < 0) - return keystroke; - return keystroke >> 8; -} - -/**************************************************************** - * Boot menu and BCV execution - ****************************************************************/ - -#define DEFAULT_BOOTMENU_WAIT 2500 - -static const char menuchars[] = { - '1', '2', '3', '4', '5', '6', '7', '8', '9', - 'a', 'b', 'c', 'd', 'e', 'f', 'g', 'h', 'i', - 'j', 'k', 'l', 'm', 'n', 'o', 'p', 'q', 'r', - 's', /* skip t (tpm menu) */ - 'u', 'v', 'w', 'x', 'y', 'z' -}; - -// Show IPL option menu. -void -interactive_bootmenu(void) -{ - if (! CONFIG_BOOTMENU) - return; - int show_boot_menu = romfile_loadint("etc/show-boot-menu", 1); - if (!show_boot_menu) - return; - - // skip menu if only one boot device and no TPM - if (show_boot_menu == 2 && !tpm_can_show_menu() - && !hlist_empty(&BootList) && !BootList.first->next) { - dprintf(1, "Only one boot device present. Skip boot menu.\n"); - printf("\n"); - return; - } - - while (get_keystroke(0) >= 0) - ; - - char *bootmsg = romfile_loadfile("etc/boot-menu-message", NULL); - int menukey = romfile_loadint("etc/boot-menu-key", 1); - printf("%s", bootmsg ?: "\nPress ESC for boot menu.\n\n"); - free(bootmsg); - - u32 menutime = romfile_loadint("etc/boot-menu-wait", DEFAULT_BOOTMENU_WAIT); - enable_bootsplash(); - int scan_code = get_keystroke(menutime); - disable_bootsplash(); - if (scan_code != menukey) - return; - - while (get_keystroke(0) >= 0) - ; - - printf("Select boot device:\n\n"); - wait_threads(); - - // Show menu items - int maxmenu = 0; - struct bootentry_s *pos, *boot = NULL; - hlist_for_each_entry(pos, &BootList, node) { - char desc[77]; - if (maxmenu >= ARRAY_SIZE(menuchars)) { - break; - } - printf("%c. %s\n", menuchars[maxmenu] - , strtcpy(desc, pos->description, ARRAY_SIZE(desc))); - maxmenu++; - } - if (tpm_can_show_menu()) { - printf("\nt. TPM Configuration\n"); - } - - // Get key press. If the menu key is ESC, do not restart boot unless - // 1.5 seconds have passed. Otherwise users (trained by years of - // repeatedly hitting keys to enter the BIOS) will end up hitting ESC - // multiple times and immediately booting the primary boot device. - int esc_accepted_time = irqtimer_calc(menukey == 1 ? 1500 : 0); - for (;;) { - int keystroke = get_keystroke_full(1000); - if (keystroke == 0x011b && !irqtimer_check(esc_accepted_time)) - continue; - if (keystroke < 0) // timeout - continue; - - scan_code = keystroke >> 8; - int key_ascii = keystroke & 0xff; - if (tpm_can_show_menu() && key_ascii == 't') { - printf("\n"); - tpm_menu(); - } - if (scan_code == 1) { - // ESC - printf("\n"); - return; - } - - maxmenu = 0; - hlist_for_each_entry(pos, &BootList, node) { - if (maxmenu >= ARRAY_SIZE(menuchars)) - break; - if (key_ascii == menuchars[maxmenu]) { - boot = pos; - break; - } - maxmenu++; - } - if (boot) - break; - } - printf("\n"); - - // Find entry and make top priority. - hlist_del(&boot->node); - boot->priority = 0; - hlist_add_head(&boot->node, &BootList); -} - -// BEV (Boot Execution Vector) list -struct bev_s { - int type; - u32 vector; -}; -static struct bev_s BEV[20]; -static int BEVCount; -static int HaveHDBoot, HaveFDBoot; - -static void -add_bev(int type, u32 vector) -{ - if (type == IPL_TYPE_HARDDISK && HaveHDBoot++) - return; - if (type == IPL_TYPE_FLOPPY && HaveFDBoot++) - return; - if (BEVCount >= ARRAY_SIZE(BEV)) - return; - struct bev_s *bev = &BEV[BEVCount++]; - bev->type = type; - bev->vector = vector; -} - -// Prepare for boot - show menu and run bcvs. -void -bcv_prepboot(void) -{ - if (! CONFIG_BOOT) - return; - - int haltprio = find_prio("HALT"); - if (haltprio >= 0) - bootentry_add(IPL_TYPE_HALT, haltprio, 0, "HALT"); - - // Map drives and populate BEV list - struct bootentry_s *pos; - hlist_for_each_entry(pos, &BootList, node) { - switch (pos->type) { - case IPL_TYPE_BCV: - call_bcv(pos->vector.seg, pos->vector.offset); - add_bev(IPL_TYPE_HARDDISK, 0); - break; - case IPL_TYPE_FLOPPY: - map_floppy_drive(pos->drive); - add_bev(IPL_TYPE_FLOPPY, 0); - break; - case IPL_TYPE_HARDDISK: - map_hd_drive(pos->drive); - add_bev(IPL_TYPE_HARDDISK, 0); - break; - case IPL_TYPE_CDROM: - map_cd_drive(pos->drive); - // NO BREAK - default: - add_bev(pos->type, pos->data); - break; - } - } - - // If nothing added a floppy/hd boot - add it manually. - add_bev(IPL_TYPE_FLOPPY, 0); - add_bev(IPL_TYPE_HARDDISK, 0); -} - - -/**************************************************************** - * Boot code (int 18/19) - ****************************************************************/ - -// Jump to a bootup entry point. -static void -call_boot_entry(struct segoff_s bootsegip, u8 bootdrv) -{ - dprintf(1, "Booting from %04x:%04x\n", bootsegip.seg, bootsegip.offset); - struct bregs br; - memset(&br, 0, sizeof(br)); - br.flags = F_IF; - br.code = bootsegip; - // Set the magic number in ax and the boot drive in dl. - br.dl = bootdrv; - br.ax = 0xaa55; - farcall16(&br); -} - -// Boot from a disk (either floppy or harddrive) -static void -boot_disk(u8 bootdrv, int checksig) -{ - u16 bootseg = 0x07c0; - - // Read sector - struct bregs br; - memset(&br, 0, sizeof(br)); - br.flags = F_IF; - br.dl = bootdrv; - br.es = bootseg; - br.ah = 2; - br.al = 1; - br.cl = 1; - call16_int(0x13, &br); - - if (br.flags & F_CF) { - printf("Boot failed: could not read the boot disk\n\n"); - return; - } - - if (checksig) { - struct mbr_s *mbr = (void*)0; - if (GET_FARVAR(bootseg, mbr->signature) != MBR_SIGNATURE) { - printf("Boot failed: not a bootable disk\n\n"); - return; - } - } - - tpm_add_bcv(bootdrv, MAKE_FLATPTR(bootseg, 0), 512); - - /* Canonicalize bootseg:bootip */ - u16 bootip = (bootseg & 0x0fff) << 4; - bootseg &= 0xf000; - - call_boot_entry(SEGOFF(bootseg, bootip), bootdrv); -} - -// Boot from a CD-ROM -static void -boot_cdrom(struct drive_s *drive) -{ - if (! CONFIG_CDROM_BOOT) - return; - printf("Booting from DVD/CD...\n"); - - int status = cdrom_boot(drive); - if (status) { - printf("Boot failed: Could not read from CDROM (code %04x)\n", status); - return; - } - - u8 bootdrv = CDEmu.emulated_drive; - u16 bootseg = CDEmu.load_segment; - - tpm_add_cdrom(bootdrv, MAKE_FLATPTR(bootseg, 0), 512); - - /* Canonicalize bootseg:bootip */ - u16 bootip = (bootseg & 0x0fff) << 4; - bootseg &= 0xf000; - - call_boot_entry(SEGOFF(bootseg, bootip), bootdrv); -} - -// Boot from a CBFS payload -static void -boot_cbfs(struct cbfs_file *file) -{ - if (!CONFIG_COREBOOT_FLASH) - return; - printf("Booting from CBFS...\n"); - cbfs_run_payload(file); -} - -// Boot from a BEV entry on an optionrom. -static void -boot_rom(u32 vector) -{ - printf("Booting from ROM...\n"); - struct segoff_s so; - so.segoff = vector; - call_boot_entry(so, 0); -} - -// Unable to find bootable device - warn user and eventually retry. -static void -boot_fail(void) -{ - if (BootRetryTime == (u32)-1) - printf("No bootable device.\n"); - else - printf("No bootable device. Retrying in %d seconds.\n" - , BootRetryTime/1000); - // Wait for 'BootRetryTime' milliseconds and then reboot. - u32 end = irqtimer_calc(BootRetryTime); - for (;;) { - if (BootRetryTime != (u32)-1 && irqtimer_check(end)) - break; - yield_toirq(); - } - printf("Rebooting.\n"); - reset(); -} - -// Determine next boot method and attempt a boot using it. -static void -do_boot(int seq_nr) -{ - if (! CONFIG_BOOT) - panic("Boot support not compiled in.\n"); - - if (seq_nr >= BEVCount) - boot_fail(); - - // Boot the given BEV type. - struct bev_s *ie = &BEV[seq_nr]; - switch (ie->type) { - case IPL_TYPE_FLOPPY: - printf("Booting from Floppy...\n"); - boot_disk(0x00, CheckFloppySig); - break; - case IPL_TYPE_HARDDISK: - printf("Booting from Hard Disk...\n"); - boot_disk(0x80, 1); - break; - case IPL_TYPE_CDROM: - boot_cdrom((void*)ie->vector); - break; - case IPL_TYPE_CBFS: - boot_cbfs((void*)ie->vector); - break; - case IPL_TYPE_BEV: - boot_rom(ie->vector); - break; - case IPL_TYPE_HALT: - boot_fail(); - break; - } - - // Boot failed: invoke the boot recovery function - struct bregs br; - memset(&br, 0, sizeof(br)); - br.flags = F_IF; - call16_int(0x18, &br); -} - -int BootSequence VARLOW = -1; - -// Boot Failure recovery: try the next device. -void VISIBLE32FLAT -handle_18(void) -{ - debug_enter(NULL, DEBUG_HDL_18); - int seq = BootSequence + 1; - BootSequence = seq; - do_boot(seq); -} - -// INT 19h Boot Load Service Entry Point -void VISIBLE32FLAT -handle_19(void) -{ - debug_enter(NULL, DEBUG_HDL_19); - BootSequence = 0; - do_boot(0); -} diff --git a/payloads/external/SeaBIOS/src/bootsplash.c b/payloads/external/SeaBIOS/src/bootsplash.c deleted file mode 100644 index 538b316d..00000000 --- a/payloads/external/SeaBIOS/src/bootsplash.c +++ /dev/null @@ -1,255 +0,0 @@ -// Initialize the VGA console and possibly show a boot splash image. -// -// Copyright (C) 2009-2010 coresystems GmbH -// Copyright (C) 2010 Kevin O'Connor <kevin@koconnor.net> -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "bregs.h" // struct bregs -#include "config.h" // CONFIG_* -#include "farptr.h" // FLATPTR_TO_SEG -#include "malloc.h" // free -#include "output.h" // dprintf -#include "romfile.h" // romfile_loadfile -#include "stacks.h" // call16_int -#include "std/vbe.h" // struct vbe_info -#include "string.h" // memset -#include "util.h" // enable_bootsplash - - -/**************************************************************** - * Helper functions - ****************************************************************/ - -// Call int10 vga handler. -static void -call16_int10(struct bregs *br) -{ - br->flags = F_IF; - start_preempt(); - call16_int(0x10, br); - finish_preempt(); -} - - -/**************************************************************** - * VGA text / graphics console - ****************************************************************/ - -void -enable_vga_console(void) -{ - dprintf(1, "Turning on vga text mode console\n"); - struct bregs br; - - /* Enable VGA text mode */ - memset(&br, 0, sizeof(br)); - br.ax = 0x0003; - call16_int10(&br); - - // Write to screen. - printf("SeaBIOS (version %s)\n", VERSION); - display_uuid(); -} - -static int -find_videomode(struct vbe_info *vesa_info, struct vbe_mode_info *mode_info - , int width, int height, int bpp_req) -{ - dprintf(3, "Finding vesa mode with dimensions %d/%d\n", width, height); - u16 *videomodes = SEGOFF_TO_FLATPTR(vesa_info->video_mode); - for (;; videomodes++) { - u16 videomode = *videomodes; - if (videomode == 0xffff) { - dprintf(1, "Unable to find vesa video mode dimensions %d/%d\n" - , width, height); - return -1; - } - struct bregs br; - memset(&br, 0, sizeof(br)); - br.ax = 0x4f01; - br.cx = videomode; - br.di = FLATPTR_TO_OFFSET(mode_info); - br.es = FLATPTR_TO_SEG(mode_info); - call16_int10(&br); - if (br.ax != 0x4f) { - dprintf(1, "get_mode failed.\n"); - continue; - } - if (mode_info->xres != width - || mode_info->yres != height) - continue; - u8 depth = mode_info->bits_per_pixel; - if (bpp_req == 0) { - if ((depth != 16 && depth != 24 && depth != 32) - || mode_info->green_size == 5) - continue; - } else { - if (depth != bpp_req) - continue; - } - return videomode; - } -} - -static int BootsplashActive; - -void -enable_bootsplash(void) -{ - if (!CONFIG_BOOTSPLASH) - return; - /* splash picture can be bmp or jpeg file */ - dprintf(3, "Checking for bootsplash\n"); - u8 type = 0; /* 0 means jpg, 1 means bmp, default is 0=jpg */ - int filesize; - u8 *filedata = romfile_loadfile("bootsplash.jpg", &filesize); - if (!filedata) { - filedata = romfile_loadfile("bootsplash.bmp", &filesize); - if (!filedata) - return; - type = 1; - } - dprintf(3, "start showing bootsplash\n"); - - u8 *picture = NULL; /* data buff used to be flushed to the video buf */ - struct jpeg_decdata *jpeg = NULL; - struct bmp_decdata *bmp = NULL; - struct vbe_info *vesa_info = malloc_tmplow(sizeof(*vesa_info)); - struct vbe_mode_info *mode_info = malloc_tmplow(sizeof(*mode_info)); - if (!vesa_info || !mode_info) { - warn_noalloc(); - goto done; - } - - /* Check whether we have a VESA 2.0 compliant BIOS */ - memset(vesa_info, 0, sizeof(struct vbe_info)); - vesa_info->signature = VBE2_SIGNATURE; - struct bregs br; - memset(&br, 0, sizeof(br)); - br.ax = 0x4f00; - br.di = FLATPTR_TO_OFFSET(vesa_info); - br.es = FLATPTR_TO_SEG(vesa_info); - call16_int10(&br); - if (vesa_info->signature != VESA_SIGNATURE) { - dprintf(1,"No VBE2 found.\n"); - goto done; - } - - /* Print some debugging information about our card. */ - char *vendor = SEGOFF_TO_FLATPTR(vesa_info->oem_vendor_string); - char *product = SEGOFF_TO_FLATPTR(vesa_info->oem_product_string); - dprintf(3, "VESA %d.%d\nVENDOR: %s\nPRODUCT: %s\n", - vesa_info->version>>8, vesa_info->version&0xff, - vendor, product); - - int ret, width, height; - int bpp_require = 0; - if (type == 0) { - jpeg = jpeg_alloc(); - if (!jpeg) { - warn_noalloc(); - goto done; - } - /* Parse jpeg and get image size. */ - dprintf(5, "Decoding bootsplash.jpg\n"); - ret = jpeg_decode(jpeg, filedata); - if (ret) { - dprintf(1, "jpeg_decode failed with return code %d...\n", ret); - goto done; - } - jpeg_get_size(jpeg, &width, &height); - } else { - bmp = bmp_alloc(); - if (!bmp) { - warn_noalloc(); - goto done; - } - /* Parse bmp and get image size. */ - dprintf(5, "Decoding bootsplash.bmp\n"); - ret = bmp_decode(bmp, filedata, filesize); - if (ret) { - dprintf(1, "bmp_decode failed with return code %d...\n", ret); - goto done; - } - bmp_get_info(bmp, &width, &height, &bpp_require); - } - - // jpeg would use 16 or 24 bpp video mode, BMP uses 16/24/32 bpp mode. - - // Try to find a graphics mode with the corresponding dimensions. - int videomode = find_videomode(vesa_info, mode_info, width, height, - bpp_require); - if (videomode < 0) { - dprintf(1, "failed to find a videomode with %dx%d %dbpp (0=any).\n", - width, height, bpp_require); - goto done; - } - void *framebuffer = (void *)mode_info->phys_base; - int depth = mode_info->bits_per_pixel; - dprintf(3, "mode: %04x\n", videomode); - dprintf(3, "framebuffer: %p\n", framebuffer); - dprintf(3, "bytes per scanline: %d\n", mode_info->bytes_per_scanline); - dprintf(3, "bits per pixel: %d\n", depth); - - // Allocate space for image and decompress it. - int imagesize = height * mode_info->bytes_per_scanline; - picture = malloc_tmphigh(imagesize); - if (!picture) { - warn_noalloc(); - goto done; - } - - if (type == 0) { - dprintf(5, "Decompressing bootsplash.jpg\n"); - ret = jpeg_show(jpeg, picture, width, height, depth, - mode_info->bytes_per_scanline); - if (ret) { - dprintf(1, "jpeg_show failed with return code %d...\n", ret); - goto done; - } - } else { - dprintf(5, "Decompressing bootsplash.bmp\n"); - ret = bmp_show(bmp, picture, width, height, depth, - mode_info->bytes_per_scanline); - if (ret) { - dprintf(1, "bmp_show failed with return code %d...\n", ret); - goto done; - } - } - - /* Switch to graphics mode */ - dprintf(5, "Switching to graphics mode\n"); - memset(&br, 0, sizeof(br)); - br.ax = 0x4f02; - br.bx = videomode | VBE_MODE_LINEAR_FRAME_BUFFER; - call16_int10(&br); - if (br.ax != 0x4f) { - dprintf(1, "set_mode failed.\n"); - goto done; - } - - /* Show the picture */ - dprintf(5, "Showing bootsplash picture\n"); - iomemcpy(framebuffer, picture, imagesize); - dprintf(5, "Bootsplash copy complete\n"); - BootsplashActive = 1; - -done: - free(filedata); - free(picture); - free(vesa_info); - free(mode_info); - free(jpeg); - free(bmp); - return; -} - -void -disable_bootsplash(void) -{ - if (!CONFIG_BOOTSPLASH || !BootsplashActive) - return; - BootsplashActive = 0; - enable_vga_console(); -} diff --git a/payloads/external/SeaBIOS/src/bregs.h b/payloads/external/SeaBIOS/src/bregs.h deleted file mode 100644 index d4052634..00000000 --- a/payloads/external/SeaBIOS/src/bregs.h +++ /dev/null @@ -1,80 +0,0 @@ -// Structure layout of cpu registers that the bios uses. -// -// Copyright (C) 2008 Kevin O'Connor <kevin@koconnor.net> -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#ifndef __BREGS_H -#define __BREGS_H - -#include "types.h" // u16 -#include "x86.h" // F_CF - - -/**************************************************************** - * Registers saved/restored in romlayout.S - ****************************************************************/ - -#define UREG(ER, R, RH, RL) union { u32 ER; struct { u16 R; u16 R ## _hi; }; struct { u8 RL; u8 RH; u8 R ## _hilo; u8 R ## _hihi; }; } - -// Layout of registers passed in to irq handlers. Note that this -// layout corresponds to code in romlayout.S - don't change it here -// without also updating the assembler code. -struct bregs { - u16 ds; - u16 es; - UREG(edi, di, di8u, di8l); - UREG(esi, si, si8u, si8l); - UREG(ebp, bp, bp8u, bp8l); - UREG(ebx, bx, bh, bl); - UREG(edx, dx, dh, dl); - UREG(ecx, cx, ch, cl); - UREG(eax, ax, ah, al); - struct segoff_s code; - u16 flags; -} PACKED; - - -/**************************************************************** - * Helper functions - ****************************************************************/ - -static inline void -set_cf(struct bregs *regs, int cond) -{ - if (cond) - regs->flags |= F_CF; - else - regs->flags &= ~F_CF; -} - -// Frequently used return codes -#define RET_EUNSUPPORTED 0x86 - -static inline void -set_success(struct bregs *regs) -{ - set_cf(regs, 0); -} - -static inline void -set_code_success(struct bregs *regs) -{ - regs->ah = 0; - set_cf(regs, 0); -} - -static inline void -set_invalid_silent(struct bregs *regs) -{ - set_cf(regs, 1); -} - -static inline void -set_code_invalid_silent(struct bregs *regs, u8 code) -{ - regs->ah = code; - set_cf(regs, 1); -} - -#endif // bregs.h diff --git a/payloads/external/SeaBIOS/src/byteorder.h b/payloads/external/SeaBIOS/src/byteorder.h deleted file mode 100644 index 928c1b80..00000000 --- a/payloads/external/SeaBIOS/src/byteorder.h +++ /dev/null @@ -1,71 +0,0 @@ -#ifndef __BYTEORDER_H -#define __BYTEORDER_H - -#include "types.h" // u32 - -static inline u16 __swab16_constant(u16 val) { - return (val<<8) | (val>>8); -} -static inline u32 __swab32_constant(u32 val) { - return (val<<24) | ((val&0xff00)<<8) | ((val&0xff0000)>>8) | (val>>24); -} -static inline u64 __swab64_constant(u64 val) { - return ((u64)__swab32_constant(val) << 32) | __swab32_constant(val>>32); -} -static inline u32 __swab32(u32 val) { - asm("bswapl %0" : "+r"(val)); - return val; -} -static inline u64 __swab64(u64 val) { - union u64_u32_u i, o; - i.val = val; - o.lo = __swab32(i.hi); - o.hi = __swab32(i.lo); - return o.val; -} - -#define swab16(x) __swab16_constant(x) -#define swab32(x) (__builtin_constant_p((u32)(x)) \ - ? __swab32_constant(x) : __swab32(x)) -#define swab64(x) (__builtin_constant_p((u64)(x)) \ - ? __swab64_constant(x) : __swab64(x)) - -static inline u16 cpu_to_le16(u16 x) { - return x; -} -static inline u32 cpu_to_le32(u32 x) { - return x; -} -static inline u64 cpu_to_le64(u64 x) { - return x; -} -static inline u16 le16_to_cpu(u16 x) { - return x; -} -static inline u32 le32_to_cpu(u32 x) { - return x; -} -static inline u64 le64_to_cpu(u64 x) { - return x; -} - -static inline u16 cpu_to_be16(u16 x) { - return swab16(x); -} -static inline u32 cpu_to_be32(u32 x) { - return swab32(x); -} -static inline u64 cpu_to_be64(u64 x) { - return swab64(x); -} -static inline u16 be16_to_cpu(u16 x) { - return swab16(x); -} -static inline u32 be32_to_cpu(u32 x) { - return swab32(x); -} -static inline u64 be64_to_cpu(u64 x) { - return swab64(x); -} - -#endif // byteorder.h diff --git a/payloads/external/SeaBIOS/src/cdrom.c b/payloads/external/SeaBIOS/src/cdrom.c deleted file mode 100644 index a77671a4..00000000 --- a/payloads/external/SeaBIOS/src/cdrom.c +++ /dev/null @@ -1,322 +0,0 @@ -// Support for booting from cdroms (the "El Torito" spec). -// -// Copyright (C) 2008,2009 Kevin O'Connor <kevin@koconnor.net> -// Copyright (C) 2002 MandrakeSoft S.A. -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "biosvar.h" // GET_GLOBAL -#include "block.h" // struct drive_s -#include "bregs.h" // struct bregs -#include "hw/ata.h" // ATA_CMD_REQUEST_SENSE -#include "hw/blockcmd.h" // CDB_CMD_REQUEST_SENSE -#include "malloc.h" // free -#include "output.h" // dprintf -#include "std/disk.h" // DISK_RET_SUCCESS -#include "string.h" // memset -#include "util.h" // cdrom_prepboot -#include "tcgbios.h" // tpm_* - - -/**************************************************************** - * CD emulation - ****************************************************************/ - -struct eltorito_s CDEmu VARLOW = { .size=sizeof(CDEmu) }; -struct drive_s *emulated_drive_gf VARLOW; -struct drive_s *cdemu_drive_gf VARFSEG; - -static int -cdemu_read(struct disk_op_s *op) -{ - struct drive_s *drive_gf = GET_LOW(emulated_drive_gf); - struct disk_op_s dop; - dop.drive_fl = drive_gf; - dop.command = op->command; - dop.lba = GET_LOW(CDEmu.ilba) + op->lba / 4; - - int count = op->count; - op->count = 0; - u8 *cdbuf_fl = GET_GLOBAL(bounce_buf_fl); - - if (op->lba & 3) { - // Partial read of first block. - dop.count = 1; - dop.buf_fl = cdbuf_fl; - int ret = process_op(&dop); - if (ret) - return ret; - u8 thiscount = 4 - (op->lba & 3); - if (thiscount > count) - thiscount = count; - count -= thiscount; - memcpy_fl(op->buf_fl, cdbuf_fl + (op->lba & 3) * 512, thiscount * 512); - op->buf_fl += thiscount * 512; - op->count += thiscount; - dop.lba++; - } - - if (count > 3) { - // Read n number of regular blocks. - dop.count = count / 4; - dop.buf_fl = op->buf_fl; - int ret = process_op(&dop); - op->count += dop.count * 4; - if (ret) - return ret; - u8 thiscount = count & ~3; - count &= 3; - op->buf_fl += thiscount * 512; - dop.lba += thiscount / 4; - } - - if (count) { - // Partial read on last block. - dop.count = 1; - dop.buf_fl = cdbuf_fl; - int ret = process_op(&dop); - if (ret) - return ret; - u8 thiscount = count; - memcpy_fl(op->buf_fl, cdbuf_fl, thiscount * 512); - op->count += thiscount; - } - - return DISK_RET_SUCCESS; -} - -int -cdemu_process_op(struct disk_op_s *op) -{ - if (!CONFIG_CDROM_EMU) - return 0; - - switch (op->command) { - case CMD_READ: - return cdemu_read(op); - case CMD_WRITE: - case CMD_FORMAT: - return DISK_RET_EWRITEPROTECT; - default: - return default_process_op(op); - } -} - -void -cdrom_prepboot(void) -{ - if (!CONFIG_CDROM_EMU) - return; - if (!CDCount) - return; - if (create_bounce_buf() < 0) - return; - - struct drive_s *drive = malloc_fseg(sizeof(*drive)); - if (!drive) { - warn_noalloc(); - return; - } - cdemu_drive_gf = drive; - memset(drive, 0, sizeof(*drive)); - drive->type = DTYPE_CDEMU; - drive->blksize = DISK_SECTOR_SIZE; - drive->sectors = (u64)-1; -} - - -/**************************************************************** - * CD booting - ****************************************************************/ - -int -cdrom_boot(struct drive_s *drive) -{ - ASSERT32FLAT(); - struct disk_op_s dop; - int cdid = getDriveId(EXTTYPE_CD, drive); - memset(&dop, 0, sizeof(dop)); - dop.drive_fl = drive; - if (!dop.drive_fl || cdid < 0) - return 1; - - int ret = scsi_is_ready(&dop); - if (ret) - dprintf(5, "scsi_is_ready returned %d\n", ret); - - // Read the Boot Record Volume Descriptor - u8 buffer[CDROM_SECTOR_SIZE]; - dop.command = CMD_READ; - dop.lba = 0x11; - dop.count = 1; - dop.buf_fl = buffer; - ret = process_op(&dop); - if (ret) - return 3; - - // Validity checks - if (buffer[0]) - return 4; - if (strcmp((char*)&buffer[1], "CD001\001EL TORITO SPECIFICATION") != 0) - return 5; - - // ok, now we calculate the Boot catalog address - u32 lba = *(u32*)&buffer[0x47]; - - // And we read the Boot Catalog - dop.lba = lba; - dop.count = 1; - ret = process_op(&dop); - if (ret) - return 7; - - // Validation entry - if (buffer[0x00] != 0x01) - return 8; // Header - if (buffer[0x01] != 0x00) - return 9; // Platform - if (buffer[0x1E] != 0x55) - return 10; // key 1 - if (buffer[0x1F] != 0xAA) - return 10; // key 2 - - // Initial/Default Entry - if (buffer[0x20] != 0x88) - return 11; // Bootable - - /* measure 2048 bytes (one sector) */ - tpm_add_cdrom_catalog(MAKE_FLATPTR(GET_SEG(SS), buffer), sizeof(buffer)); - - // Fill in el-torito cdrom emulation fields. - emulated_drive_gf = drive; - u8 media = buffer[0x21]; - - u16 boot_segment = *(u16*)&buffer[0x22]; - if (!boot_segment) - boot_segment = 0x07C0; - CDEmu.load_segment = boot_segment; - CDEmu.buffer_segment = 0x0000; - - u16 nbsectors = *(u16*)&buffer[0x26]; - CDEmu.sector_count = nbsectors; - - lba = *(u32*)&buffer[0x28]; - CDEmu.ilba = lba; - - CDEmu.controller_index = drive->cntl_id / 2; - CDEmu.device_spec = drive->cntl_id % 2; - - // And we read the image in memory - nbsectors = DIV_ROUND_UP(nbsectors, 4); - dop.lba = lba; - dop.buf_fl = MAKE_FLATPTR(boot_segment, 0); - while (nbsectors) { - int count = nbsectors; - if (count > 64*1024/CDROM_SECTOR_SIZE) - count = 64*1024/CDROM_SECTOR_SIZE; - dop.count = count; - ret = process_op(&dop); - if (ret) - return 12; - nbsectors -= count; - dop.lba += count; - dop.buf_fl += count*CDROM_SECTOR_SIZE; - } - - if (media == 0) { - // No emulation requested - return success. - CDEmu.emulated_drive = EXTSTART_CD + cdid; - return 0; - } - - // Emulation of a floppy/harddisk requested - if (! CONFIG_CDROM_EMU || !cdemu_drive_gf) - return 13; - - // Set emulated drive id and increase bios installed hardware - // number of devices - if (media < 4) { - // Floppy emulation - CDEmu.emulated_drive = 0x00; - // XXX - get and set actual floppy count. - set_equipment_flags(0x41, 0x41); - - switch (media) { - case 0x01: // 1.2M floppy - CDEmu.chs.sptcyl = 15; - CDEmu.chs.cyllow = 79; - CDEmu.chs.heads = 1; - break; - case 0x02: // 1.44M floppy - CDEmu.chs.sptcyl = 18; - CDEmu.chs.cyllow = 79; - CDEmu.chs.heads = 1; - break; - case 0x03: // 2.88M floppy - CDEmu.chs.sptcyl = 36; - CDEmu.chs.cyllow = 79; - CDEmu.chs.heads = 1; - break; - } - } else { - // Harddrive emulation - CDEmu.emulated_drive = 0x80; - SET_BDA(hdcount, GET_BDA(hdcount) + 1); - - // Peak at partition table to get chs. - struct mbr_s *mbr = MAKE_FLATPTR(boot_segment, 0); - CDEmu.chs = mbr->partitions[0].last; - } - - // everything is ok, so from now on, the emulation is active - CDEmu.media = media; - dprintf(6, "cdemu media=%d\n", media); - - return 0; -} - -// check if media is present and the drive is bootable. -// in case it is return the volume label. -char* -cdrom_media_info(struct drive_s *drive) -{ - ASSERT32FLAT(); - - struct disk_op_s dop; - memset(&dop, 0, sizeof(dop)); - dop.drive_fl = drive; - - int ret = scsi_is_ready(&dop); - if (ret) - return NULL; - - // Read the Boot Record Volume Descriptor - u8 buffer[CDROM_SECTOR_SIZE]; - dop.command = CMD_READ; - dop.lba = 0x11; - dop.count = 1; - dop.buf_fl = buffer; - ret = process_op(&dop); - if (ret) - return NULL; - - // Is it bootable? - if (buffer[0]) - return NULL; - if (strcmp((char*)&buffer[1], "CD001\001EL TORITO SPECIFICATION") != 0) - return NULL; - - // Read the Primary Volume Descriptor - dop.command = CMD_READ; - dop.lba = 0x10; - dop.count = 1; - dop.buf_fl = buffer; - ret = process_op(&dop); - if (ret) - return NULL; - - // Read volume id, trim trailing spaces - char *volume = znprintf(30, "%s", buffer + 40); - nullTrailingSpace(volume); - return volume; -} diff --git a/payloads/external/SeaBIOS/src/clock.c b/payloads/external/SeaBIOS/src/clock.c deleted file mode 100644 index e44e1120..00000000 --- a/payloads/external/SeaBIOS/src/clock.c +++ /dev/null @@ -1,506 +0,0 @@ -// 16bit code to handle system clocks. -// -// Copyright (C) 2008-2010 Kevin O'Connor <kevin@koconnor.net> -// Copyright (C) 2002 MandrakeSoft S.A. -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "biosvar.h" // SET_BDA -#include "bregs.h" // struct bregs -#include "hw/pic.h" // pic_eoi1 -#include "hw/ps2port.h" // ps2_check_event -#include "hw/rtc.h" // rtc_read -#include "hw/usb-hid.h" // usb_check_event -#include "output.h" // debug_enter -#include "stacks.h" // yield -#include "string.h" // memset -#include "util.h" // clock_setup - - -/**************************************************************** - * Init - ****************************************************************/ - -static u32 -bcd2bin(u8 val) -{ - return (val & 0xf) + ((val >> 4) * 10); -} - -u8 Century VARLOW; - -void -clock_setup(void) -{ - dprintf(3, "init timer\n"); - pit_setup(); - - rtc_setup(); - rtc_updating(); - u32 seconds = bcd2bin(rtc_read(CMOS_RTC_SECONDS)); - u32 minutes = bcd2bin(rtc_read(CMOS_RTC_MINUTES)); - u32 hours = bcd2bin(rtc_read(CMOS_RTC_HOURS)); - u32 ticks = ticks_from_ms(((hours * 60 + minutes) * 60 + seconds) * 1000); - SET_BDA(timer_counter, ticks % TICKS_PER_DAY); - - // Setup Century storage - if (CONFIG_QEMU) { - Century = rtc_read(CMOS_CENTURY); - } else { - // Infer current century from the year. - u8 year = rtc_read(CMOS_RTC_YEAR); - if (year > 0x80) - Century = 0x19; - else - Century = 0x20; - } - - enable_hwirq(0, FUNC16(entry_08)); - if (CONFIG_RTC_TIMER) - enable_hwirq(8, FUNC16(entry_70)); -} - - -/**************************************************************** - * Standard clock functions - ****************************************************************/ - -// get current clock count -static void -handle_1a00(struct bregs *regs) -{ - yield(); - u32 ticks = GET_BDA(timer_counter); - regs->cx = ticks >> 16; - regs->dx = ticks; - regs->al = GET_BDA(timer_rollover); - SET_BDA(timer_rollover, 0); // reset flag - set_success(regs); -} - -// Set Current Clock Count -static void -handle_1a01(struct bregs *regs) -{ - u32 ticks = (regs->cx << 16) | regs->dx; - SET_BDA(timer_counter, ticks); - SET_BDA(timer_rollover, 0); // reset flag - // XXX - should use set_code_success()? - regs->ah = 0; - set_success(regs); -} - -// Read CMOS Time -static void -handle_1a02(struct bregs *regs) -{ - if (rtc_updating()) { - set_invalid(regs); - return; - } - - regs->dh = rtc_read(CMOS_RTC_SECONDS); - regs->cl = rtc_read(CMOS_RTC_MINUTES); - regs->ch = rtc_read(CMOS_RTC_HOURS); - regs->dl = rtc_read(CMOS_STATUS_B) & RTC_B_DSE; - regs->ah = 0; - regs->al = regs->ch; - set_success(regs); -} - -// Set CMOS Time -static void -handle_1a03(struct bregs *regs) -{ - // Using a debugger, I notice the following masking/setting - // of bits in Status Register B, by setting Reg B to - // a few values and getting its value after INT 1A was called. - // - // try#1 try#2 try#3 - // before 1111 1101 0111 1101 0000 0000 - // after 0110 0010 0110 0010 0000 0010 - // - // Bit4 in try#1 flipped in hardware (forced low) due to bit7=1 - // My assumption: RegB = ((RegB & 01100000b) | 00000010b) - if (rtc_updating()) { - rtc_setup(); - // fall through as if an update were not in progress - } - rtc_write(CMOS_RTC_SECONDS, regs->dh); - rtc_write(CMOS_RTC_MINUTES, regs->cl); - rtc_write(CMOS_RTC_HOURS, regs->ch); - // Set Daylight Savings time enabled bit to requested value - u8 val8 = ((rtc_read(CMOS_STATUS_B) & (RTC_B_PIE|RTC_B_AIE)) - | RTC_B_24HR | (regs->dl & RTC_B_DSE)); - rtc_write(CMOS_STATUS_B, val8); - regs->ah = 0; - regs->al = val8; // val last written to Reg B - set_success(regs); -} - -// Read CMOS Date -static void -handle_1a04(struct bregs *regs) -{ - regs->ah = 0; - if (rtc_updating()) { - set_invalid(regs); - return; - } - regs->cl = rtc_read(CMOS_RTC_YEAR); - regs->dh = rtc_read(CMOS_RTC_MONTH); - regs->dl = rtc_read(CMOS_RTC_DAY_MONTH); - regs->ch = GET_LOW(Century); - regs->al = regs->ch; - set_success(regs); -} - -// Set CMOS Date -static void -handle_1a05(struct bregs *regs) -{ - // Using a debugger, I notice the following masking/setting - // of bits in Status Register B, by setting Reg B to - // a few values and getting its value after INT 1A was called. - // - // try#1 try#2 try#3 try#4 - // before 1111 1101 0111 1101 0000 0010 0000 0000 - // after 0110 1101 0111 1101 0000 0010 0000 0000 - // - // Bit4 in try#1 flipped in hardware (forced low) due to bit7=1 - // My assumption: RegB = (RegB & 01111111b) - if (rtc_updating()) { - rtc_setup(); - set_invalid(regs); - return; - } - rtc_write(CMOS_RTC_YEAR, regs->cl); - rtc_write(CMOS_RTC_MONTH, regs->dh); - rtc_write(CMOS_RTC_DAY_MONTH, regs->dl); - SET_LOW(Century, regs->ch); - // clear halt-clock bit - u8 val8 = rtc_read(CMOS_STATUS_B) & ~RTC_B_SET; - rtc_write(CMOS_STATUS_B, val8); - regs->ah = 0; - regs->al = val8; // AL = val last written to Reg B - set_success(regs); -} - -// Set Alarm Time in CMOS -static void -handle_1a06(struct bregs *regs) -{ - // Using a debugger, I notice the following masking/setting - // of bits in Status Register B, by setting Reg B to - // a few values and getting its value after INT 1A was called. - // - // try#1 try#2 try#3 - // before 1101 1111 0101 1111 0000 0000 - // after 0110 1111 0111 1111 0010 0000 - // - // Bit4 in try#1 flipped in hardware (forced low) due to bit7=1 - // My assumption: RegB = ((RegB & 01111111b) | 00100000b) - u8 val8 = rtc_read(CMOS_STATUS_B); // Get Status Reg B - regs->ax = 0; - if (val8 & RTC_B_AIE) { - // Alarm interrupt enabled already - set_invalid(regs); - return; - } - if (rtc_updating()) { - rtc_setup(); - // fall through as if an update were not in progress - } - rtc_write(CMOS_RTC_SECONDS_ALARM, regs->dh); - rtc_write(CMOS_RTC_MINUTES_ALARM, regs->cl); - rtc_write(CMOS_RTC_HOURS_ALARM, regs->ch); - // enable Status Reg B alarm bit, clear halt clock bit - rtc_write(CMOS_STATUS_B, (val8 & ~RTC_B_SET) | RTC_B_AIE); - set_success(regs); -} - -// Turn off Alarm -static void -handle_1a07(struct bregs *regs) -{ - // Using a debugger, I notice the following masking/setting - // of bits in Status Register B, by setting Reg B to - // a few values and getting its value after INT 1A was called. - // - // try#1 try#2 try#3 try#4 - // before 1111 1101 0111 1101 0010 0000 0010 0010 - // after 0100 0101 0101 0101 0000 0000 0000 0010 - // - // Bit4 in try#1 flipped in hardware (forced low) due to bit7=1 - // My assumption: RegB = (RegB & 01010111b) - u8 val8 = rtc_read(CMOS_STATUS_B); // Get Status Reg B - // clear clock-halt bit, disable alarm bit - rtc_write(CMOS_STATUS_B, val8 & ~(RTC_B_SET|RTC_B_AIE)); - regs->ah = 0; - regs->al = val8; // val last written to Reg B - set_success(regs); -} - -static void -handle_1abb(struct bregs *regs) -{ - if (!CONFIG_TCGBIOS) - return; - - dprintf(DEBUG_tcg, "16: Calling tpm_interrupt_handler\n"); - call32(tpm_interrupt_handler32, MAKE_FLATPTR(GET_SEG(SS), regs), 0); -} - -// Unsupported -static void -handle_1aXX(struct bregs *regs) -{ - set_unimplemented(regs); -} - -// INT 1Ah Time-of-day Service Entry Point -void VISIBLE16 -handle_1a(struct bregs *regs) -{ - debug_enter(regs, DEBUG_HDL_1a); - switch (regs->ah) { - case 0x00: handle_1a00(regs); break; - case 0x01: handle_1a01(regs); break; - case 0x02: handle_1a02(regs); break; - case 0x03: handle_1a03(regs); break; - case 0x04: handle_1a04(regs); break; - case 0x05: handle_1a05(regs); break; - case 0x06: handle_1a06(regs); break; - case 0x07: handle_1a07(regs); break; - case 0xbb: handle_1abb(regs); break; - default: handle_1aXX(regs); break; - } -} - -// Update main tick counter -static void -clock_update(void) -{ - u32 counter = GET_BDA(timer_counter); - counter++; - // compare to one days worth of timer ticks at 18.2 hz - if (counter >= TICKS_PER_DAY) { - // there has been a midnight rollover at this point - counter = 0; - SET_BDA(timer_rollover, GET_BDA(timer_rollover) + 1); - } - SET_BDA(timer_counter, counter); - - // Check for internal events. - floppy_tick(); - usb_check_event(); - ps2_check_event(); - sercon_check_event(); -} - -// INT 08h System Timer ISR Entry Point -void VISIBLE16 -handle_08(void) -{ - debug_isr(DEBUG_ISR_08); - clock_update(); - - // chain to user timer tick INT #0x1c - struct bregs br; - memset(&br, 0, sizeof(br)); - br.flags = F_IF; - call16_int(0x1c, &br); - - pic_eoi1(); -} - -u32 last_timer_check VARLOW; - -// Simulate timer irq on machines without hardware irqs -void -clock_poll_irq(void) -{ - if (CONFIG_HARDWARE_IRQ) - return; - if (!timer_check(GET_LOW(last_timer_check))) - return; - SET_LOW(last_timer_check, timer_calc(ticks_to_ms(1))); - clock_update(); -} - - -/**************************************************************** - * IRQ based timer - ****************************************************************/ - -// Calculate the timer value at 'count' number of full timer ticks in -// the future. -u32 -irqtimer_calc_ticks(u32 count) -{ - return (GET_BDA(timer_counter) + count + 1) % TICKS_PER_DAY; -} - -// Return the timer value that is 'msecs' time in the future. -u32 -irqtimer_calc(u32 msecs) -{ - if (!msecs) - return GET_BDA(timer_counter); - return irqtimer_calc_ticks(ticks_from_ms(msecs)); -} - -// Check if the given timer value has passed. -int -irqtimer_check(u32 end) -{ - return (((GET_BDA(timer_counter) + TICKS_PER_DAY - end) % TICKS_PER_DAY) - < (TICKS_PER_DAY/2)); -} - - -/**************************************************************** - * Periodic timer - ****************************************************************/ - -static int -set_usertimer(u32 usecs, u16 seg, u16 offset) -{ - if (GET_BDA(rtc_wait_flag) & RWS_WAIT_PENDING) - return -1; - - // Interval not already set. - SET_BDA(rtc_wait_flag, RWS_WAIT_PENDING); // Set status byte. - SET_BDA(user_wait_complete_flag, SEGOFF(seg, offset)); - SET_BDA(user_wait_timeout, usecs); - rtc_use(); - return 0; -} - -static void -clear_usertimer(void) -{ - if (!(GET_BDA(rtc_wait_flag) & RWS_WAIT_PENDING)) - return; - // Turn off status byte. - SET_BDA(rtc_wait_flag, 0); - rtc_release(); -} - -#define RET_ECLOCKINUSE 0x83 - -// Wait for CX:DX microseconds -void -handle_1586(struct bregs *regs) -{ - if (!CONFIG_RTC_TIMER) { - set_code_unimplemented(regs, RET_EUNSUPPORTED); - return; - } - // Use the rtc to wait for the specified time. - u8 statusflag = 0; - u32 count = (regs->cx << 16) | regs->dx; - int ret = set_usertimer(count, GET_SEG(SS), (u32)&statusflag); - if (ret) { - set_code_invalid(regs, RET_ECLOCKINUSE); - return; - } - while (!statusflag) - yield_toirq(); - set_success(regs); -} - -// Set Interval requested. -static void -handle_158300(struct bregs *regs) -{ - int ret = set_usertimer((regs->cx << 16) | regs->dx, regs->es, regs->bx); - if (ret) - // Interval already set. - set_code_invalid(regs, RET_EUNSUPPORTED); - else - set_success(regs); -} - -// Clear interval requested -static void -handle_158301(struct bregs *regs) -{ - clear_usertimer(); - set_success(regs); -} - -static void -handle_1583XX(struct bregs *regs) -{ - set_code_unimplemented(regs, RET_EUNSUPPORTED); - regs->al--; -} - -void -handle_1583(struct bregs *regs) -{ - if (!CONFIG_RTC_TIMER) { - handle_1583XX(regs); - return; - } - switch (regs->al) { - case 0x00: handle_158300(regs); break; - case 0x01: handle_158301(regs); break; - default: handle_1583XX(regs); break; - } -} - -#define USEC_PER_RTC DIV_ROUND_CLOSEST(1000000, 1024) - -// int70h: IRQ8 - CMOS RTC -void VISIBLE16 -handle_70(void) -{ - if (!CONFIG_RTC_TIMER) - return; - debug_isr(DEBUG_ISR_70); - - // Check which modes are enabled and have occurred. - u8 registerB = rtc_read(CMOS_STATUS_B); - u8 registerC = rtc_read(CMOS_STATUS_C); - - if (!(registerB & (RTC_B_PIE|RTC_B_AIE))) - goto done; - if (registerC & RTC_B_AIE) { - // Handle Alarm Interrupt. - struct bregs br; - memset(&br, 0, sizeof(br)); - br.flags = F_IF; - call16_int(0x4a, &br); - } - if (!(registerC & RTC_B_PIE)) - goto done; - - // Handle Periodic Interrupt. - - check_preempt(); - - if (!GET_BDA(rtc_wait_flag)) - goto done; - - // Wait Interval (Int 15, AH=83) active. - u32 time = GET_BDA(user_wait_timeout); // Time left in microseconds. - if (time < USEC_PER_RTC) { - // Done waiting - write to specified flag byte. - struct segoff_s segoff = GET_BDA(user_wait_complete_flag); - u16 ptr_seg = segoff.seg; - u8 *ptr_far = (u8*)(segoff.offset+0); - u8 oldval = GET_FARVAR(ptr_seg, *ptr_far); - SET_FARVAR(ptr_seg, *ptr_far, oldval | 0x80); - - clear_usertimer(); - } else { - // Continue waiting. - time -= USEC_PER_RTC; - SET_BDA(user_wait_timeout, time); - } - -done: - pic_eoi2(); -} diff --git a/payloads/external/SeaBIOS/src/code16gcc.s b/payloads/external/SeaBIOS/src/code16gcc.s deleted file mode 100644 index 8f7121b8..00000000 --- a/payloads/external/SeaBIOS/src/code16gcc.s +++ /dev/null @@ -1 +0,0 @@ -.code16gcc diff --git a/payloads/external/SeaBIOS/src/config.h b/payloads/external/SeaBIOS/src/config.h deleted file mode 100644 index 93c8dbc2..00000000 --- a/payloads/external/SeaBIOS/src/config.h +++ /dev/null @@ -1,108 +0,0 @@ -#ifndef __CONFIG_H -#define __CONFIG_H - -#include "autoconf.h" - -// Configuration definitions. - -//#define BUILD_APPNAME "QEMU" -//#define BUILD_CPUNAME8 "QEMUCPU " -//#define BUILD_APPNAME6 "QEMU " -//#define BUILD_APPNAME4 "QEMU" -#define BUILD_APPNAME "Bochs" -#define BUILD_CPUNAME8 "BOCHSCPU" -#define BUILD_APPNAME6 "BOCHS " -#define BUILD_APPNAME4 "BXPC" - -// Maximum number of map entries in the e820 map -#define BUILD_MAX_E820 32 -// Space to reserve in high-memory for tables -#define BUILD_MAX_HIGHTABLE (256*1024) -// Largest supported externaly facing drive id -#define BUILD_MAX_EXTDRIVE 16 -// Number of bytes the smbios may be and still live in the f-segment -#define BUILD_MAX_SMBIOS_FSEG 600 -// Maximum number of bytes the mptable may be and still be copied to f-segment -#define BUILD_MAX_MPTABLE_FSEG 600 - -#define BUILD_MODEL_ID 0xFC -#define BUILD_SUBMODEL_ID 0x00 -#define BUILD_BIOS_REVISION 0x01 - -// Various memory addresses used by the code. -#define BUILD_STACK_ADDR 0x7000 -#define BUILD_S3RESUME_STACK_ADDR 0x1000 -#define BUILD_AP_BOOT_ADDR 0x10000 -#define BUILD_EBDA_MINIMUM 0x90000 -#define BUILD_LOWRAM_END 0xa0000 -#define BUILD_ROM_START 0xc0000 -#define BUILD_BIOS_ADDR 0xf0000 -#define BUILD_BIOS_SIZE 0x10000 -#define BUILD_EXTRA_STACK_SIZE 0x800 -#define BUILD_SMM_INIT_ADDR 0x30000 -#define BUILD_SMM_ADDR 0xa0000 - -#define BUILD_PCIMEM_START 0xe0000000 -#define BUILD_PCIMEM_END 0xfec00000 /* IOAPIC is mapped at */ -#define BUILD_PCIMEM64_START 0x8000000000ULL -#define BUILD_PCIMEM64_END 0x10000000000ULL - -#define BUILD_IOAPIC_ADDR 0xfec00000 -#define BUILD_IOAPIC_ID 0 -#define BUILD_HPET_ADDRESS 0xfed00000 -#define BUILD_APIC_ADDR 0xfee00000 - -// PCI IRQS -#define BUILD_PCI_IRQS ((1<<5) | (1<<9) | (1<<10) | (1<<11)) - -// Important real-mode segments -#define SEG_IVT 0x0000 -#define SEG_BDA 0x0040 -#define SEG_BIOS 0xf000 - -// Segment definitions in protected mode (see rombios32_gdt in misc.c) -#define SEG32_MODE32_CS (1 << 3) -#define SEG32_MODE32_DS (2 << 3) -#define SEG32_MODE16_CS (3 << 3) -#define SEG32_MODE16_DS (4 << 3) -#define SEG32_MODE16BIG_CS (5 << 3) -#define SEG32_MODE16BIG_DS (6 << 3) - -// Debugging levels. If non-zero and CONFIG_DEBUG_LEVEL is greater -// than the specified value, then the corresponding irq handler will -// report every enter event. -#define DEBUG_ISR_02 1 -#define DEBUG_HDL_05 1 -#define DEBUG_ISR_08 20 -#define DEBUG_ISR_09 9 -#define DEBUG_ISR_0e 9 -#define DEBUG_HDL_11 2 -#define DEBUG_HDL_12 2 -#define DEBUG_HDL_13 10 -#define DEBUG_HDL_14 2 -#define DEBUG_HDL_15 9 -#define DEBUG_HDL_16 9 -#define DEBUG_HDL_17 2 -#define DEBUG_HDL_18 1 -#define DEBUG_HDL_19 1 -#define DEBUG_HDL_1a 9 -#define DEBUG_HDL_40 1 -#define DEBUG_ISR_70 9 -#define DEBUG_ISR_74 9 -#define DEBUG_ISR_75 1 -#define DEBUG_ISR_76 10 -#define DEBUG_ISR_hwpic1 5 -#define DEBUG_ISR_hwpic2 5 -#define DEBUG_HDL_smi 9 -#define DEBUG_HDL_smp 1 -#define DEBUG_HDL_pnp 1 -#define DEBUG_HDL_pmm 1 -#define DEBUG_HDL_pcibios 9 -#define DEBUG_HDL_apm 9 - -#define DEBUG_unimplemented 2 -#define DEBUG_invalid 3 -#define DEBUG_thread 2 -#define DEBUG_tcg 20 - -#endif // config.h diff --git a/payloads/external/SeaBIOS/src/cp437.c b/payloads/external/SeaBIOS/src/cp437.c deleted file mode 100644 index 719872f5..00000000 --- a/payloads/external/SeaBIOS/src/cp437.c +++ /dev/null @@ -1,277 +0,0 @@ -/* - * code page 437 to unicode map - * - * This file may be distributed under the terms of the GNU LGPLv3 license. - */ - -#include "types.h" -#include "biosvar.h" -#include "cp437.h" - -static VAR16 u16 cp437_to_unicode_map[256] = { - - /* https://en.wikipedia.org/wiki/Code_page_437 */ - [ 0x00 ] = 0x0000, - [ 0x01 ] = 0x263A, - [ 0x02 ] = 0x263B, - [ 0x03 ] = 0x2665, - [ 0x04 ] = 0x2666, - [ 0x05 ] = 0x2663, - [ 0x06 ] = 0x2660, - [ 0x07 ] = 0x2022, - [ 0x08 ] = 0x25D8, - [ 0x09 ] = 0x25CB, - [ 0x0a ] = 0x25D9, - [ 0x0b ] = 0x2642, - [ 0x0c ] = 0x2640, - [ 0x0d ] = 0x266A, - [ 0x0e ] = 0x266B, - [ 0x0f ] = 0x263C, - [ 0x10 ] = 0x25BA, - [ 0x11 ] = 0x25C4, - [ 0x12 ] = 0x2195, - [ 0x13 ] = 0x203C, - [ 0x14 ] = 0x00B6, - [ 0x15 ] = 0x00A7, - [ 0x16 ] = 0x25AC, - [ 0x17 ] = 0x21A8, - [ 0x18 ] = 0x2191, - [ 0x19 ] = 0x2193, - [ 0x1a ] = 0x2192, - [ 0x1b ] = 0x2190, - [ 0x1c ] = 0x221F, - [ 0x1d ] = 0x2194, - [ 0x1e ] = 0x25B2, - [ 0x1f ] = 0x25BC, - [ 0x7f ] = 0x2302, - - /* http://www.unicode.org/Public/MAPPINGS/VENDORS/MICSFT/PC/CP437.TXT */ - [ 0x20 ] = 0x0020, // SPACE - [ 0x21 ] = 0x0021, // EXCLAMATION MARK - [ 0x22 ] = 0x0022, // QUOTATION MARK - [ 0x23 ] = 0x0023, // NUMBER SIGN - [ 0x24 ] = 0x0024, // DOLLAR SIGN - [ 0x25 ] = 0x0025, // PERCENT SIGN - [ 0x26 ] = 0x0026, // AMPERSAND - [ 0x27 ] = 0x0027, // APOSTROPHE - [ 0x28 ] = 0x0028, // LEFT PARENTHESIS - [ 0x29 ] = 0x0029, // RIGHT PARENTHESIS - [ 0x2a ] = 0x002a, // ASTERISK - [ 0x2b ] = 0x002b, // PLUS SIGN - [ 0x2c ] = 0x002c, // COMMA - [ 0x2d ] = 0x002d, // HYPHEN-MINUS - [ 0x2e ] = 0x002e, // FULL STOP - [ 0x2f ] = 0x002f, // SOLIDUS - [ 0x30 ] = 0x0030, // DIGIT ZERO - [ 0x31 ] = 0x0031, // DIGIT ONE - [ 0x32 ] = 0x0032, // DIGIT TWO - [ 0x33 ] = 0x0033, // DIGIT THREE - [ 0x34 ] = 0x0034, // DIGIT FOUR - [ 0x35 ] = 0x0035, // DIGIT FIVE - [ 0x36 ] = 0x0036, // DIGIT SIX - [ 0x37 ] = 0x0037, // DIGIT SEVEN - [ 0x38 ] = 0x0038, // DIGIT EIGHT - [ 0x39 ] = 0x0039, // DIGIT NINE - [ 0x3a ] = 0x003a, // COLON - [ 0x3b ] = 0x003b, // SEMICOLON - [ 0x3c ] = 0x003c, // LESS-THAN SIGN - [ 0x3d ] = 0x003d, // EQUALS SIGN - [ 0x3e ] = 0x003e, // GREATER-THAN SIGN - [ 0x3f ] = 0x003f, // QUESTION MARK - [ 0x40 ] = 0x0040, // COMMERCIAL AT - [ 0x41 ] = 0x0041, // LATIN CAPITAL LETTER A - [ 0x42 ] = 0x0042, // LATIN CAPITAL LETTER B - [ 0x43 ] = 0x0043, // LATIN CAPITAL LETTER C - [ 0x44 ] = 0x0044, // LATIN CAPITAL LETTER D - [ 0x45 ] = 0x0045, // LATIN CAPITAL LETTER E - [ 0x46 ] = 0x0046, // LATIN CAPITAL LETTER F - [ 0x47 ] = 0x0047, // LATIN CAPITAL LETTER G - [ 0x48 ] = 0x0048, // LATIN CAPITAL LETTER H - [ 0x49 ] = 0x0049, // LATIN CAPITAL LETTER I - [ 0x4a ] = 0x004a, // LATIN CAPITAL LETTER J - [ 0x4b ] = 0x004b, // LATIN CAPITAL LETTER K - [ 0x4c ] = 0x004c, // LATIN CAPITAL LETTER L - [ 0x4d ] = 0x004d, // LATIN CAPITAL LETTER M - [ 0x4e ] = 0x004e, // LATIN CAPITAL LETTER N - [ 0x4f ] = 0x004f, // LATIN CAPITAL LETTER O - [ 0x50 ] = 0x0050, // LATIN CAPITAL LETTER P - [ 0x51 ] = 0x0051, // LATIN CAPITAL LETTER Q - [ 0x52 ] = 0x0052, // LATIN CAPITAL LETTER R - [ 0x53 ] = 0x0053, // LATIN CAPITAL LETTER S - [ 0x54 ] = 0x0054, // LATIN CAPITAL LETTER T - [ 0x55 ] = 0x0055, // LATIN CAPITAL LETTER U - [ 0x56 ] = 0x0056, // LATIN CAPITAL LETTER V - [ 0x57 ] = 0x0057, // LATIN CAPITAL LETTER W - [ 0x58 ] = 0x0058, // LATIN CAPITAL LETTER X - [ 0x59 ] = 0x0059, // LATIN CAPITAL LETTER Y - [ 0x5a ] = 0x005a, // LATIN CAPITAL LETTER Z - [ 0x5b ] = 0x005b, // LEFT SQUARE BRACKET - [ 0x5c ] = 0x005c, // REVERSE SOLIDUS - [ 0x5d ] = 0x005d, // RIGHT SQUARE BRACKET - [ 0x5e ] = 0x005e, // CIRCUMFLEX ACCENT - [ 0x5f ] = 0x005f, // LOW LINE - [ 0x60 ] = 0x0060, // GRAVE ACCENT - [ 0x61 ] = 0x0061, // LATIN SMALL LETTER A - [ 0x62 ] = 0x0062, // LATIN SMALL LETTER B - [ 0x63 ] = 0x0063, // LATIN SMALL LETTER C - [ 0x64 ] = 0x0064, // LATIN SMALL LETTER D - [ 0x65 ] = 0x0065, // LATIN SMALL LETTER E - [ 0x66 ] = 0x0066, // LATIN SMALL LETTER F - [ 0x67 ] = 0x0067, // LATIN SMALL LETTER G - [ 0x68 ] = 0x0068, // LATIN SMALL LETTER H - [ 0x69 ] = 0x0069, // LATIN SMALL LETTER I - [ 0x6a ] = 0x006a, // LATIN SMALL LETTER J - [ 0x6b ] = 0x006b, // LATIN SMALL LETTER K - [ 0x6c ] = 0x006c, // LATIN SMALL LETTER L - [ 0x6d ] = 0x006d, // LATIN SMALL LETTER M - [ 0x6e ] = 0x006e, // LATIN SMALL LETTER N - [ 0x6f ] = 0x006f, // LATIN SMALL LETTER O - [ 0x70 ] = 0x0070, // LATIN SMALL LETTER P - [ 0x71 ] = 0x0071, // LATIN SMALL LETTER Q - [ 0x72 ] = 0x0072, // LATIN SMALL LETTER R - [ 0x73 ] = 0x0073, // LATIN SMALL LETTER S - [ 0x74 ] = 0x0074, // LATIN SMALL LETTER T - [ 0x75 ] = 0x0075, // LATIN SMALL LETTER U - [ 0x76 ] = 0x0076, // LATIN SMALL LETTER V - [ 0x77 ] = 0x0077, // LATIN SMALL LETTER W - [ 0x78 ] = 0x0078, // LATIN SMALL LETTER X - [ 0x79 ] = 0x0079, // LATIN SMALL LETTER Y - [ 0x7a ] = 0x007a, // LATIN SMALL LETTER Z - [ 0x7b ] = 0x007b, // LEFT CURLY BRACKET - [ 0x7c ] = 0x007c, // VERTICAL LINE - [ 0x7d ] = 0x007d, // RIGHT CURLY BRACKET - [ 0x7e ] = 0x007e, // TILDE - [ 0x80 ] = 0x00c7, // LATIN CAPITAL LETTER C WITH CEDILLA - [ 0x81 ] = 0x00fc, // LATIN SMALL LETTER U WITH DIAERESIS - [ 0x82 ] = 0x00e9, // LATIN SMALL LETTER E WITH ACUTE - [ 0x83 ] = 0x00e2, // LATIN SMALL LETTER A WITH CIRCUMFLEX - [ 0x84 ] = 0x00e4, // LATIN SMALL LETTER A WITH DIAERESIS - [ 0x85 ] = 0x00e0, // LATIN SMALL LETTER A WITH GRAVE - [ 0x86 ] = 0x00e5, // LATIN SMALL LETTER A WITH RING ABOVE - [ 0x87 ] = 0x00e7, // LATIN SMALL LETTER C WITH CEDILLA - [ 0x88 ] = 0x00ea, // LATIN SMALL LETTER E WITH CIRCUMFLEX - [ 0x89 ] = 0x00eb, // LATIN SMALL LETTER E WITH DIAERESIS - [ 0x8a ] = 0x00e8, // LATIN SMALL LETTER E WITH GRAVE - [ 0x8b ] = 0x00ef, // LATIN SMALL LETTER I WITH DIAERESIS - [ 0x8c ] = 0x00ee, // LATIN SMALL LETTER I WITH CIRCUMFLEX - [ 0x8d ] = 0x00ec, // LATIN SMALL LETTER I WITH GRAVE - [ 0x8e ] = 0x00c4, // LATIN CAPITAL LETTER A WITH DIAERESIS - [ 0x8f ] = 0x00c5, // LATIN CAPITAL LETTER A WITH RING ABOVE - [ 0x90 ] = 0x00c9, // LATIN CAPITAL LETTER E WITH ACUTE - [ 0x91 ] = 0x00e6, // LATIN SMALL LIGATURE AE - [ 0x92 ] = 0x00c6, // LATIN CAPITAL LIGATURE AE - [ 0x93 ] = 0x00f4, // LATIN SMALL LETTER O WITH CIRCUMFLEX - [ 0x94 ] = 0x00f6, // LATIN SMALL LETTER O WITH DIAERESIS - [ 0x95 ] = 0x00f2, // LATIN SMALL LETTER O WITH GRAVE - [ 0x96 ] = 0x00fb, // LATIN SMALL LETTER U WITH CIRCUMFLEX - [ 0x97 ] = 0x00f9, // LATIN SMALL LETTER U WITH GRAVE - [ 0x98 ] = 0x00ff, // LATIN SMALL LETTER Y WITH DIAERESIS - [ 0x99 ] = 0x00d6, // LATIN CAPITAL LETTER O WITH DIAERESIS - [ 0x9a ] = 0x00dc, // LATIN CAPITAL LETTER U WITH DIAERESIS - [ 0x9b ] = 0x00a2, // CENT SIGN - [ 0x9c ] = 0x00a3, // POUND SIGN - [ 0x9d ] = 0x00a5, // YEN SIGN - [ 0x9e ] = 0x20a7, // PESETA SIGN - [ 0x9f ] = 0x0192, // LATIN SMALL LETTER F WITH HOOK - [ 0xa0 ] = 0x00e1, // LATIN SMALL LETTER A WITH ACUTE - [ 0xa1 ] = 0x00ed, // LATIN SMALL LETTER I WITH ACUTE - [ 0xa2 ] = 0x00f3, // LATIN SMALL LETTER O WITH ACUTE - [ 0xa3 ] = 0x00fa, // LATIN SMALL LETTER U WITH ACUTE - [ 0xa4 ] = 0x00f1, // LATIN SMALL LETTER N WITH TILDE - [ 0xa5 ] = 0x00d1, // LATIN CAPITAL LETTER N WITH TILDE - [ 0xa6 ] = 0x00aa, // FEMININE ORDINAL INDICATOR - [ 0xa7 ] = 0x00ba, // MASCULINE ORDINAL INDICATOR - [ 0xa8 ] = 0x00bf, // INVERTED QUESTION MARK - [ 0xa9 ] = 0x2310, // REVERSED NOT SIGN - [ 0xaa ] = 0x00ac, // NOT SIGN - [ 0xab ] = 0x00bd, // VULGAR FRACTION ONE HALF - [ 0xac ] = 0x00bc, // VULGAR FRACTION ONE QUARTER - [ 0xad ] = 0x00a1, // INVERTED EXCLAMATION MARK - [ 0xae ] = 0x00ab, // LEFT-POINTING DOUBLE ANGLE QUOTATION MARK - [ 0xaf ] = 0x00bb, // RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK - [ 0xb0 ] = 0x2591, // LIGHT SHADE - [ 0xb1 ] = 0x2592, // MEDIUM SHADE - [ 0xb2 ] = 0x2593, // DARK SHADE - [ 0xb3 ] = 0x2502, // BOX DRAWINGS LIGHT VERTICAL - [ 0xb4 ] = 0x2524, // BOX DRAWINGS LIGHT VERTICAL AND LEFT - [ 0xb5 ] = 0x2561, // BOX DRAWINGS VERTICAL SINGLE AND LEFT DOUBLE - [ 0xb6 ] = 0x2562, // BOX DRAWINGS VERTICAL DOUBLE AND LEFT SINGLE - [ 0xb7 ] = 0x2556, // BOX DRAWINGS DOWN DOUBLE AND LEFT SINGLE - [ 0xb8 ] = 0x2555, // BOX DRAWINGS DOWN SINGLE AND LEFT DOUBLE - [ 0xb9 ] = 0x2563, // BOX DRAWINGS DOUBLE VERTICAL AND LEFT - [ 0xba ] = 0x2551, // BOX DRAWINGS DOUBLE VERTICAL - [ 0xbb ] = 0x2557, // BOX DRAWINGS DOUBLE DOWN AND LEFT - [ 0xbc ] = 0x255d, // BOX DRAWINGS DOUBLE UP AND LEFT - [ 0xbd ] = 0x255c, // BOX DRAWINGS UP DOUBLE AND LEFT SINGLE - [ 0xbe ] = 0x255b, // BOX DRAWINGS UP SINGLE AND LEFT DOUBLE - [ 0xbf ] = 0x2510, // BOX DRAWINGS LIGHT DOWN AND LEFT - [ 0xc0 ] = 0x2514, // BOX DRAWINGS LIGHT UP AND RIGHT - [ 0xc1 ] = 0x2534, // BOX DRAWINGS LIGHT UP AND HORIZONTAL - [ 0xc2 ] = 0x252c, // BOX DRAWINGS LIGHT DOWN AND HORIZONTAL - [ 0xc3 ] = 0x251c, // BOX DRAWINGS LIGHT VERTICAL AND RIGHT - [ 0xc4 ] = 0x2500, // BOX DRAWINGS LIGHT HORIZONTAL - [ 0xc5 ] = 0x253c, // BOX DRAWINGS LIGHT VERTICAL AND HORIZONTAL - [ 0xc6 ] = 0x255e, // BOX DRAWINGS VERTICAL SINGLE AND RIGHT DOUBLE - [ 0xc7 ] = 0x255f, // BOX DRAWINGS VERTICAL DOUBLE AND RIGHT SINGLE - [ 0xc8 ] = 0x255a, // BOX DRAWINGS DOUBLE UP AND RIGHT - [ 0xc9 ] = 0x2554, // BOX DRAWINGS DOUBLE DOWN AND RIGHT - [ 0xca ] = 0x2569, // BOX DRAWINGS DOUBLE UP AND HORIZONTAL - [ 0xcb ] = 0x2566, // BOX DRAWINGS DOUBLE DOWN AND HORIZONTAL - [ 0xcc ] = 0x2560, // BOX DRAWINGS DOUBLE VERTICAL AND RIGHT - [ 0xcd ] = 0x2550, // BOX DRAWINGS DOUBLE HORIZONTAL - [ 0xce ] = 0x256c, // BOX DRAWINGS DOUBLE VERTICAL AND HORIZONTAL - [ 0xcf ] = 0x2567, // BOX DRAWINGS UP SINGLE AND HORIZONTAL DOUBLE - [ 0xd0 ] = 0x2568, // BOX DRAWINGS UP DOUBLE AND HORIZONTAL SINGLE - [ 0xd1 ] = 0x2564, // BOX DRAWINGS DOWN SINGLE AND HORIZONTAL DOUBLE - [ 0xd2 ] = 0x2565, // BOX DRAWINGS DOWN DOUBLE AND HORIZONTAL SINGLE - [ 0xd3 ] = 0x2559, // BOX DRAWINGS UP DOUBLE AND RIGHT SINGLE - [ 0xd4 ] = 0x2558, // BOX DRAWINGS UP SINGLE AND RIGHT DOUBLE - [ 0xd5 ] = 0x2552, // BOX DRAWINGS DOWN SINGLE AND RIGHT DOUBLE - [ 0xd6 ] = 0x2553, // BOX DRAWINGS DOWN DOUBLE AND RIGHT SINGLE - [ 0xd7 ] = 0x256b, // BOX DRAWINGS VERTICAL DOUBLE AND HORIZONTAL SINGLE - [ 0xd8 ] = 0x256a, // BOX DRAWINGS VERTICAL SINGLE AND HORIZONTAL DOUBLE - [ 0xd9 ] = 0x2518, // BOX DRAWINGS LIGHT UP AND LEFT - [ 0xda ] = 0x250c, // BOX DRAWINGS LIGHT DOWN AND RIGHT - [ 0xdb ] = 0x2588, // FULL BLOCK - [ 0xdc ] = 0x2584, // LOWER HALF BLOCK - [ 0xdd ] = 0x258c, // LEFT HALF BLOCK - [ 0xde ] = 0x2590, // RIGHT HALF BLOCK - [ 0xdf ] = 0x2580, // UPPER HALF BLOCK - [ 0xe0 ] = 0x03b1, // GREEK SMALL LETTER ALPHA - [ 0xe1 ] = 0x00df, // LATIN SMALL LETTER SHARP S - [ 0xe2 ] = 0x0393, // GREEK CAPITAL LETTER GAMMA - [ 0xe3 ] = 0x03c0, // GREEK SMALL LETTER PI - [ 0xe4 ] = 0x03a3, // GREEK CAPITAL LETTER SIGMA - [ 0xe5 ] = 0x03c3, // GREEK SMALL LETTER SIGMA - [ 0xe6 ] = 0x00b5, // MICRO SIGN - [ 0xe7 ] = 0x03c4, // GREEK SMALL LETTER TAU - [ 0xe8 ] = 0x03a6, // GREEK CAPITAL LETTER PHI - [ 0xe9 ] = 0x0398, // GREEK CAPITAL LETTER THETA - [ 0xea ] = 0x03a9, // GREEK CAPITAL LETTER OMEGA - [ 0xeb ] = 0x03b4, // GREEK SMALL LETTER DELTA - [ 0xec ] = 0x221e, // INFINITY - [ 0xed ] = 0x03c6, // GREEK SMALL LETTER PHI - [ 0xee ] = 0x03b5, // GREEK SMALL LETTER EPSILON - [ 0xef ] = 0x2229, // INTERSECTION - [ 0xf0 ] = 0x2261, // IDENTICAL TO - [ 0xf1 ] = 0x00b1, // PLUS-MINUS SIGN - [ 0xf2 ] = 0x2265, // GREATER-THAN OR EQUAL TO - [ 0xf3 ] = 0x2264, // LESS-THAN OR EQUAL TO - [ 0xf4 ] = 0x2320, // TOP HALF INTEGRAL - [ 0xf5 ] = 0x2321, // BOTTOM HALF INTEGRAL - [ 0xf6 ] = 0x00f7, // DIVISION SIGN - [ 0xf7 ] = 0x2248, // ALMOST EQUAL TO - [ 0xf8 ] = 0x00b0, // DEGREE SIGN - [ 0xf9 ] = 0x2219, // BULLET OPERATOR - [ 0xfa ] = 0x00b7, // MIDDLE DOT - [ 0xfb ] = 0x221a, // SQUARE ROOT - [ 0xfc ] = 0x207f, // SUPERSCRIPT LATIN SMALL LETTER N - [ 0xfd ] = 0x00b2, // SUPERSCRIPT TWO - [ 0xfe ] = 0x25a0, // BLACK SQUARE - [ 0xff ] = 0x00a0, // NO-BREAK SPACE -}; - -u16 cp437_to_unicode(u8 cp437) -{ - return GET_GLOBAL(cp437_to_unicode_map[cp437]); -} diff --git a/payloads/external/SeaBIOS/src/cp437.h b/payloads/external/SeaBIOS/src/cp437.h deleted file mode 100644 index 7bd1ef15..00000000 --- a/payloads/external/SeaBIOS/src/cp437.h +++ /dev/null @@ -1 +0,0 @@ -u16 cp437_to_unicode(u8 cp437); diff --git a/payloads/external/SeaBIOS/src/disk.c b/payloads/external/SeaBIOS/src/disk.c deleted file mode 100644 index 0328fbd1..00000000 --- a/payloads/external/SeaBIOS/src/disk.c +++ /dev/null @@ -1,779 +0,0 @@ -// 16bit code to access hard drives. -// -// Copyright (C) 2008 Kevin O'Connor <kevin@koconnor.net> -// Copyright (C) 2002 MandrakeSoft S.A. -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "biosvar.h" // SET_BDA -#include "bregs.h" // struct bregs -#include "config.h" // CONFIG_* -#include "hw/ata.h" // ATA_CB_DC -#include "hw/pic.h" // pic_eoi2 -#include "output.h" // debug_enter -#include "stacks.h" // call16_int -#include "std/disk.h" // DISK_RET_SUCCESS -#include "string.h" // memset -#include "util.h" // CDRom_locks - - -/**************************************************************** - * Return status functions - ****************************************************************/ - -static void -__disk_ret(struct bregs *regs, u32 linecode, const char *fname) -{ - u8 code = linecode; - if (regs->dl < EXTSTART_HD) - SET_BDA(floppy_last_status, code); - else - SET_BDA(disk_last_status, code); - if (code) - __set_code_invalid(regs, linecode, fname); - else - set_code_success(regs); -} - -static void -__disk_ret_unimplemented(struct bregs *regs, u32 linecode, const char *fname) -{ - u8 code = linecode; - if (regs->dl < EXTSTART_HD) - SET_BDA(floppy_last_status, code); - else - SET_BDA(disk_last_status, code); - __set_code_unimplemented(regs, linecode, fname); -} - -static void -__disk_stub(struct bregs *regs, int lineno, const char *fname) -{ - __warn_unimplemented(regs, lineno, fname); - __disk_ret(regs, DISK_RET_SUCCESS | (lineno << 8), fname); -} - -#define disk_ret(regs, code) \ - __disk_ret((regs), (code) | (__LINE__ << 8), __func__) -#define disk_ret_unimplemented(regs, code) \ - __disk_ret_unimplemented((regs), (code) | (__LINE__ << 8), __func__) -#define DISK_STUB(regs) \ - __disk_stub((regs), __LINE__, __func__) - - -/**************************************************************** - * Helper functions - ****************************************************************/ - -// Get the cylinders/heads/sectors for the given drive. -static struct chs_s -getLCHS(struct drive_s *drive_fl) -{ - struct chs_s res = { }; - if (CONFIG_CDROM_EMU && drive_fl == GET_GLOBAL(cdemu_drive_gf)) { - // Emulated drive - get info from CDEmu. (It's not possible to - // populate the geometry directly in the driveid because the - // geometry is only known after the bios segment is made - // read-only). - u8 sptcyl = GET_LOW(CDEmu.chs.sptcyl); - res.cylinder = GET_LOW(CDEmu.chs.cyllow) + ((sptcyl << 2) & 0x300) + 1; - res.head = GET_LOW(CDEmu.chs.heads) + 1; - res.sector = sptcyl & 0x3f; - return res; - } - res.cylinder = GET_FLATPTR(drive_fl->lchs.cylinder); - res.head = GET_FLATPTR(drive_fl->lchs.head); - res.sector = GET_FLATPTR(drive_fl->lchs.sector); - return res; -} - -// Execute a "disk_op_s" request after jumping to the extra stack. -static int -__send_disk_op(struct disk_op_s *op_far, u16 op_seg) -{ - struct disk_op_s dop; - memcpy_far(GET_SEG(SS), &dop, op_seg, op_far, sizeof(dop)); - - int status = process_op(&dop); - - // Update count with total sectors transferred. - SET_FARVAR(op_seg, op_far->count, dop.count); - - return status; -} - -// Execute a "disk_op_s" request (using the extra 16bit stack). -static int -send_disk_op(struct disk_op_s *op) -{ - ASSERT16(); - if (! CONFIG_DRIVES) - return -1; - if (!CONFIG_ENTRY_EXTRASTACK) - // Jump on to extra stack - return stack_hop(__send_disk_op, op, GET_SEG(SS)); - return process_op(op); -} - -// Perform read/write/verify using old-style chs accesses -static void noinline -basic_access(struct bregs *regs, struct drive_s *drive_fl, u16 command) -{ - struct disk_op_s dop; - dop.drive_fl = drive_fl; - dop.command = command; - - u8 count = regs->al; - u16 cylinder = regs->ch | ((((u16)regs->cl) << 2) & 0x300); - u16 sector = regs->cl & 0x3f; - u16 head = regs->dh; - - if (count > 128 || count == 0 || sector == 0) { - warn_invalid(regs); - disk_ret(regs, DISK_RET_EPARAM); - return; - } - dop.count = count; - - struct chs_s chs = getLCHS(drive_fl); - u16 nlc=chs.cylinder, nlh=chs.head, nls=chs.sector; - - // sanity check on cyl heads, sec - if (cylinder >= nlc || head >= nlh || sector > nls) { - warn_invalid(regs); - disk_ret(regs, DISK_RET_EPARAM); - return; - } - - // translate lchs to lba - dop.lba = (((((u32)cylinder * (u32)nlh) + (u32)head) * (u32)nls) - + (u32)sector - 1); - - dop.buf_fl = MAKE_FLATPTR(regs->es, regs->bx); - - int status = send_disk_op(&dop); - - regs->al = dop.count; - - disk_ret(regs, status); -} - -// Perform read/write/verify using new-style "int13ext" accesses. -static void noinline -extended_access(struct bregs *regs, struct drive_s *drive_fl, u16 command) -{ - struct disk_op_s dop; - struct int13ext_s *param_far = (struct int13ext_s*)(regs->si+0); - // Get lba and check. - dop.lba = GET_FARVAR(regs->ds, param_far->lba); - dop.command = command; - dop.drive_fl = drive_fl; - if (dop.lba >= GET_FLATPTR(drive_fl->sectors)) { - warn_invalid(regs); - disk_ret(regs, DISK_RET_EPARAM); - return; - } - - dop.buf_fl = SEGOFF_TO_FLATPTR(GET_FARVAR(regs->ds, param_far->data)); - dop.count = GET_FARVAR(regs->ds, param_far->count); - if (! dop.count) { - // Nothing to do. - disk_ret(regs, DISK_RET_SUCCESS); - return; - } - - int status = send_disk_op(&dop); - - SET_FARVAR(regs->ds, param_far->count, dop.count); - - disk_ret(regs, status); -} - - -/**************************************************************** - * Hard Drive functions - ****************************************************************/ - -// disk controller reset -static void -disk_1300(struct bregs *regs, struct drive_s *drive_fl) -{ - struct disk_op_s dop; - dop.drive_fl = drive_fl; - dop.command = CMD_RESET; - dop.count = 0; - int status = send_disk_op(&dop); - disk_ret(regs, status); -} - -// read disk status -static void -disk_1301(struct bregs *regs, struct drive_s *drive_fl) -{ - u8 v; - if (regs->dl < EXTSTART_HD) - // Floppy - v = GET_BDA(floppy_last_status); - else - v = GET_BDA(disk_last_status); - regs->ah = v; - set_cf(regs, v); - // XXX - clear disk_last_status? -} - -// read disk sectors -static void -disk_1302(struct bregs *regs, struct drive_s *drive_fl) -{ - basic_access(regs, drive_fl, CMD_READ); -} - -// write disk sectors -static void -disk_1303(struct bregs *regs, struct drive_s *drive_fl) -{ - basic_access(regs, drive_fl, CMD_WRITE); -} - -// verify disk sectors -static void -disk_1304(struct bregs *regs, struct drive_s *drive_fl) -{ - basic_access(regs, drive_fl, CMD_VERIFY); -} - -// format disk track -static void noinline -disk_1305(struct bregs *regs, struct drive_s *drive_fl) -{ - debug_stub(regs); - - struct chs_s chs = getLCHS(drive_fl); - u16 nlc=chs.cylinder, nlh=chs.head, nls=chs.sector; - - u8 count = regs->al; - u8 cylinder = regs->ch; - u8 head = regs->dh; - - if (cylinder >= nlc || head >= nlh || count == 0 || count > nls) { - disk_ret(regs, DISK_RET_EPARAM); - return; - } - - struct disk_op_s dop; - dop.drive_fl = drive_fl; - dop.command = CMD_FORMAT; - dop.lba = (((u32)cylinder * (u32)nlh) + (u32)head) * (u32)nls; - dop.count = count; - dop.buf_fl = MAKE_FLATPTR(regs->es, regs->bx); - int status = send_disk_op(&dop); - disk_ret(regs, status); -} - -// read disk drive parameters -static void noinline -disk_1308(struct bregs *regs, struct drive_s *drive_fl) -{ - // Get logical geometry from table - struct chs_s chs = getLCHS(drive_fl); - u16 nlc=chs.cylinder, nlh=chs.head, nls=chs.sector; - nlc--; - nlh--; - u8 count; - if (regs->dl < EXTSTART_HD) { - // Floppy - count = GET_GLOBAL(FloppyCount); - - if (CONFIG_CDROM_EMU && drive_fl == GET_GLOBAL(cdemu_drive_gf)) - regs->bx = GET_LOW(CDEmu.media) * 2; - else - regs->bx = GET_FLATPTR(drive_fl->floppy_type); - - // set es & di to point to 11 byte diskette param table in ROM - regs->es = SEG_BIOS; - regs->di = (u32)&diskette_param_table2; - } else if (regs->dl < EXTSTART_CD) { - // Hard drive - count = GET_BDA(hdcount); - nlc--; // last sector reserved - } else { - // Not supported on CDROM - disk_ret(regs, DISK_RET_EPARAM); - return; - } - - if (CONFIG_CDROM_EMU && GET_LOW(CDEmu.media)) { - u8 emudrive = GET_LOW(CDEmu.emulated_drive); - if (((emudrive ^ regs->dl) & 0x80) == 0) - // Note extra drive due to emulation. - count++; - if (regs->dl < EXTSTART_HD && count > 2) - // Max of two floppy drives. - count = 2; - } - - regs->al = 0; - regs->ch = nlc & 0xff; - regs->cl = ((nlc >> 2) & 0xc0) | (nls & 0x3f); - regs->dh = nlh; - - disk_ret(regs, DISK_RET_SUCCESS); - regs->dl = count; -} - -// initialize drive parameters -static void -disk_1309(struct bregs *regs, struct drive_s *drive_fl) -{ - DISK_STUB(regs); -} - -// seek to specified cylinder -static void -disk_130c(struct bregs *regs, struct drive_s *drive_fl) -{ - DISK_STUB(regs); -} - -// alternate disk reset -static void -disk_130d(struct bregs *regs, struct drive_s *drive_fl) -{ - DISK_STUB(regs); -} - -// check drive ready -static void -disk_1310(struct bregs *regs, struct drive_s *drive_fl) -{ - // should look at 40:8E also??? - - struct disk_op_s dop; - dop.drive_fl = drive_fl; - dop.command = CMD_ISREADY; - dop.count = 0; - int status = send_disk_op(&dop); - disk_ret(regs, status); -} - -// recalibrate -static void -disk_1311(struct bregs *regs, struct drive_s *drive_fl) -{ - DISK_STUB(regs); -} - -// controller internal diagnostic -static void -disk_1314(struct bregs *regs, struct drive_s *drive_fl) -{ - DISK_STUB(regs); -} - -// read disk drive size -static void noinline -disk_1315(struct bregs *regs, struct drive_s *drive_fl) -{ - disk_ret(regs, DISK_RET_SUCCESS); - if (regs->dl < EXTSTART_HD || regs->dl >= EXTSTART_CD) { - // Floppy or cdrom - regs->ah = 1; - return; - } - // Hard drive - - // Get logical geometry from table - struct chs_s chs = getLCHS(drive_fl); - u16 nlc=chs.cylinder, nlh=chs.head, nls=chs.sector; - - // Compute sector count seen by int13 - u32 lba = (u32)(nlc - 1) * (u32)nlh * (u32)nls; - regs->cx = lba >> 16; - regs->dx = lba & 0xffff; - regs->ah = 3; // hard disk accessible -} - -static void -disk_1316(struct bregs *regs, struct drive_s *drive_fl) -{ - if (regs->dl >= EXTSTART_HD) { - // Hard drive - disk_ret(regs, DISK_RET_EPARAM); - return; - } - disk_ret(regs, DISK_RET_ECHANGED); -} - -// IBM/MS installation check -static void -disk_1341(struct bregs *regs, struct drive_s *drive_fl) -{ - regs->bx = 0xaa55; // install check - regs->cx = 0x0007; // ext disk access and edd, removable supported - disk_ret(regs, DISK_RET_SUCCESS); - regs->ah = 0x30; // EDD 3.0 -} - -// IBM/MS extended read -static void -disk_1342(struct bregs *regs, struct drive_s *drive_fl) -{ - extended_access(regs, drive_fl, CMD_READ); -} - -// IBM/MS extended write -static void -disk_1343(struct bregs *regs, struct drive_s *drive_fl) -{ - extended_access(regs, drive_fl, CMD_WRITE); -} - -// IBM/MS verify -static void -disk_1344(struct bregs *regs, struct drive_s *drive_fl) -{ - extended_access(regs, drive_fl, CMD_VERIFY); -} - -// Locks for removable devices -u8 CDRom_locks[BUILD_MAX_EXTDRIVE] VARLOW; - -// lock -static void -disk_134500(struct bregs *regs, struct drive_s *drive_fl) -{ - int cdid = regs->dl - EXTSTART_CD; - u8 locks = GET_LOW(CDRom_locks[cdid]); - if (locks == 0xff) { - regs->al = 1; - disk_ret(regs, DISK_RET_ETOOMANYLOCKS); - return; - } - SET_LOW(CDRom_locks[cdid], locks + 1); - regs->al = 1; - disk_ret(regs, DISK_RET_SUCCESS); -} - -// unlock -static void -disk_134501(struct bregs *regs, struct drive_s *drive_fl) -{ - int cdid = regs->dl - EXTSTART_CD; - u8 locks = GET_LOW(CDRom_locks[cdid]); - if (locks == 0x00) { - regs->al = 0; - disk_ret(regs, DISK_RET_ENOTLOCKED); - return; - } - locks--; - SET_LOW(CDRom_locks[cdid], locks); - regs->al = (locks ? 1 : 0); - disk_ret(regs, DISK_RET_SUCCESS); -} - -// status -static void -disk_134502(struct bregs *regs, struct drive_s *drive_fl) -{ - int cdid = regs->dl - EXTSTART_CD; - u8 locks = GET_LOW(CDRom_locks[cdid]); - regs->al = (locks ? 1 : 0); - disk_ret(regs, DISK_RET_SUCCESS); -} - -static void -disk_1345XX(struct bregs *regs, struct drive_s *drive_fl) -{ - disk_ret_unimplemented(regs, DISK_RET_EPARAM); -} - -// IBM/MS lock/unlock drive -static void -disk_1345(struct bregs *regs, struct drive_s *drive_fl) -{ - if (regs->dl < EXTSTART_CD) { - // Always success for HD - disk_ret(regs, DISK_RET_SUCCESS); - return; - } - - switch (regs->al) { - case 0x00: disk_134500(regs, drive_fl); break; - case 0x01: disk_134501(regs, drive_fl); break; - case 0x02: disk_134502(regs, drive_fl); break; - default: disk_1345XX(regs, drive_fl); break; - } -} - -// IBM/MS eject media -static void noinline -disk_1346(struct bregs *regs, struct drive_s *drive_fl) -{ - if (regs->dl < EXTSTART_CD) { - // Volume Not Removable - disk_ret(regs, DISK_RET_ENOTREMOVABLE); - return; - } - - int cdid = regs->dl - EXTSTART_CD; - u8 locks = GET_LOW(CDRom_locks[cdid]); - if (locks != 0) { - disk_ret(regs, DISK_RET_ELOCKED); - return; - } - - // FIXME should handle 0x31 no media in device - // FIXME should handle 0xb5 valid request failed - - // Call removable media eject - struct bregs br; - memset(&br, 0, sizeof(br)); - br.ah = 0x52; - br.dl = regs->dl; - call16_int(0x15, &br); - - if (br.ah || br.flags & F_CF) { - disk_ret(regs, DISK_RET_ELOCKED); - return; - } - disk_ret(regs, DISK_RET_SUCCESS); -} - -// IBM/MS extended seek -static void -disk_1347(struct bregs *regs, struct drive_s *drive_fl) -{ - extended_access(regs, drive_fl, CMD_SEEK); -} - -// IBM/MS get drive parameters -static void -disk_1348(struct bregs *regs, struct drive_s *drive_fl) -{ - int ret = fill_edd(SEGOFF(regs->ds, regs->si), drive_fl); - disk_ret(regs, ret); -} - -// IBM/MS extended media change -static void -disk_1349(struct bregs *regs, struct drive_s *drive_fl) -{ - if (regs->dl < EXTSTART_CD) { - // Always success for HD - disk_ret(regs, DISK_RET_SUCCESS); - return; - } - set_invalid(regs); - // always send changed ?? - regs->ah = DISK_RET_ECHANGED; -} - -static void -disk_134e01(struct bregs *regs, struct drive_s *drive_fl) -{ - disk_ret(regs, DISK_RET_SUCCESS); -} - -static void -disk_134e03(struct bregs *regs, struct drive_s *drive_fl) -{ - disk_ret(regs, DISK_RET_SUCCESS); -} - -static void -disk_134e04(struct bregs *regs, struct drive_s *drive_fl) -{ - disk_ret(regs, DISK_RET_SUCCESS); -} - -static void -disk_134e06(struct bregs *regs, struct drive_s *drive_fl) -{ - disk_ret(regs, DISK_RET_SUCCESS); -} - -static void -disk_134eXX(struct bregs *regs, struct drive_s *drive_fl) -{ - disk_ret(regs, DISK_RET_EPARAM); -} - -// IBM/MS set hardware configuration -static void -disk_134e(struct bregs *regs, struct drive_s *drive_fl) -{ - switch (regs->al) { - case 0x01: disk_134e01(regs, drive_fl); break; - case 0x03: disk_134e03(regs, drive_fl); break; - case 0x04: disk_134e04(regs, drive_fl); break; - case 0x06: disk_134e06(regs, drive_fl); break; - default: disk_134eXX(regs, drive_fl); break; - } -} - -static void -disk_13XX(struct bregs *regs, struct drive_s *drive_fl) -{ - disk_ret_unimplemented(regs, DISK_RET_EPARAM); -} - -static void -disk_13(struct bregs *regs, struct drive_s *drive_fl) -{ - //debug_stub(regs); - - // clear completion flag - SET_BDA(disk_interrupt_flag, 0); - - switch (regs->ah) { - case 0x00: disk_1300(regs, drive_fl); break; - case 0x01: disk_1301(regs, drive_fl); break; - case 0x02: disk_1302(regs, drive_fl); break; - case 0x03: disk_1303(regs, drive_fl); break; - case 0x04: disk_1304(regs, drive_fl); break; - case 0x05: disk_1305(regs, drive_fl); break; - case 0x08: disk_1308(regs, drive_fl); break; - case 0x09: disk_1309(regs, drive_fl); break; - case 0x0c: disk_130c(regs, drive_fl); break; - case 0x0d: disk_130d(regs, drive_fl); break; - case 0x10: disk_1310(regs, drive_fl); break; - case 0x11: disk_1311(regs, drive_fl); break; - case 0x14: disk_1314(regs, drive_fl); break; - case 0x15: disk_1315(regs, drive_fl); break; - case 0x16: disk_1316(regs, drive_fl); break; - case 0x41: disk_1341(regs, drive_fl); break; - case 0x42: disk_1342(regs, drive_fl); break; - case 0x43: disk_1343(regs, drive_fl); break; - case 0x44: disk_1344(regs, drive_fl); break; - case 0x45: disk_1345(regs, drive_fl); break; - case 0x46: disk_1346(regs, drive_fl); break; - case 0x47: disk_1347(regs, drive_fl); break; - case 0x48: disk_1348(regs, drive_fl); break; - case 0x49: disk_1349(regs, drive_fl); break; - case 0x4e: disk_134e(regs, drive_fl); break; - default: disk_13XX(regs, drive_fl); break; - } -} - -static void -floppy_13(struct bregs *regs, struct drive_s *drive_fl) -{ - // Only limited commands are supported on floppies. - switch (regs->ah) { - case 0x00: - case 0x01: - case 0x02: - case 0x03: - case 0x04: - case 0x05: - case 0x08: - case 0x15: - case 0x16: - disk_13(regs, drive_fl); - break; - default: disk_13XX(regs, drive_fl); break; - } -} - -// ElTorito - Terminate disk emu -static void -cdemu_134b(struct bregs *regs) -{ - memcpy_far(regs->ds, (void*)(regs->si+0), SEG_LOW, &CDEmu, sizeof(CDEmu)); - - // If we have to terminate emulation - if (regs->al == 0x00) { - // FIXME ElTorito Various. Should be handled accordingly to spec - SET_LOW(CDEmu.media, 0x00); // bye bye - - // XXX - update floppy/hd count. - } - - disk_ret(regs, DISK_RET_SUCCESS); -} - - -/**************************************************************** - * Entry points - ****************************************************************/ - -static void -handle_legacy_disk(struct bregs *regs, u8 extdrive) -{ - if (! CONFIG_DRIVES) { - // XXX - support handle_1301 anyway? - disk_ret(regs, DISK_RET_EPARAM); - return; - } - - if (extdrive < EXTSTART_HD) { - struct drive_s *drive_fl = getDrive(EXTTYPE_FLOPPY, extdrive); - if (!drive_fl) - goto fail; - floppy_13(regs, drive_fl); - return; - } - - struct drive_s *drive_fl; - if (extdrive >= EXTSTART_CD) - drive_fl = getDrive(EXTTYPE_CD, extdrive - EXTSTART_CD); - else - drive_fl = getDrive(EXTTYPE_HD, extdrive - EXTSTART_HD); - if (!drive_fl) - goto fail; - disk_13(regs, drive_fl); - return; - -fail: - // XXX - support 1301/1308/1315 anyway? - disk_ret(regs, DISK_RET_EPARAM); -} - -void VISIBLE16 -handle_40(struct bregs *regs) -{ - debug_enter(regs, DEBUG_HDL_40); - handle_legacy_disk(regs, regs->dl); -} - -// INT 13h Fixed Disk Services Entry Point -void VISIBLE16 -handle_13(struct bregs *regs) -{ - debug_enter(regs, DEBUG_HDL_13); - u8 extdrive = regs->dl; - - if (CONFIG_CDROM_EMU) { - if (regs->ah == 0x4b) { - cdemu_134b(regs); - return; - } - if (GET_LOW(CDEmu.media)) { - u8 emudrive = GET_LOW(CDEmu.emulated_drive); - if (extdrive == emudrive) { - // Access to an emulated drive. - struct drive_s *cdemu_gf = GET_GLOBAL(cdemu_drive_gf); - if (regs->ah > 0x16) { - // Only old-style commands supported. - disk_13XX(regs, cdemu_gf); - return; - } - disk_13(regs, cdemu_gf); - return; - } - if (extdrive < EXTSTART_CD && ((emudrive ^ extdrive) & 0x80) == 0) - // Adjust id to make room for emulated drive. - extdrive--; - } - } - handle_legacy_disk(regs, extdrive); -} - -// record completion in BIOS task complete flag -void VISIBLE16 -handle_76(void) -{ - debug_isr(DEBUG_ISR_76); - SET_BDA(disk_interrupt_flag, 0xff); - pic_eoi2(); -} diff --git a/payloads/external/SeaBIOS/src/e820map.c b/payloads/external/SeaBIOS/src/e820map.c deleted file mode 100644 index 39445cf6..00000000 --- a/payloads/external/SeaBIOS/src/e820map.c +++ /dev/null @@ -1,152 +0,0 @@ -// Support for building memory maps suitable for int 15 e820 calls. -// -// Copyright (C) 2008,2009 Kevin O'Connor <kevin@koconnor.net> -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "config.h" // BUILD_MAX_E820 -#include "e820map.h" // struct e820entry -#include "output.h" // dprintf -#include "string.h" // memmove - - -/**************************************************************** - * e820 memory map - ****************************************************************/ - -// Info on e820 map location and size. -struct e820entry e820_list[BUILD_MAX_E820] VARFSEG; -int e820_count VARFSEG; - -// Remove an entry from the e820_list. -static void -remove_e820(int i) -{ - e820_count--; - memmove(&e820_list[i], &e820_list[i+1] - , sizeof(e820_list[0]) * (e820_count - i)); -} - -// Insert an entry in the e820_list at the given position. -static void -insert_e820(int i, u64 start, u64 size, u32 type) -{ - if (e820_count >= BUILD_MAX_E820) { - warn_noalloc(); - return; - } - - memmove(&e820_list[i+1], &e820_list[i] - , sizeof(e820_list[0]) * (e820_count - i)); - e820_count++; - struct e820entry *e = &e820_list[i]; - e->start = start; - e->size = size; - e->type = type; -} - -static const char * -e820_type_name(u32 type) -{ - switch (type) { - case E820_RAM: return "RAM"; - case E820_RESERVED: return "RESERVED"; - case E820_ACPI: return "ACPI"; - case E820_NVS: return "NVS"; - case E820_UNUSABLE: return "UNUSABLE"; - default: return "UNKNOWN"; - } -} - -// Show the current e820_list. -static void -dump_map(void) -{ - dprintf(1, "e820 map has %d items:\n", e820_count); - int i; - for (i=0; i<e820_count; i++) { - struct e820entry *e = &e820_list[i]; - u64 e_end = e->start + e->size; - dprintf(1, " %d: %016llx - %016llx = %d %s\n", i - , e->start, e_end, e->type, e820_type_name(e->type)); - } -} - -#define E820_HOLE ((u32)-1) // Used internally to remove entries - -// Add a new entry to the list. This scans for overlaps and keeps the -// list sorted. -void -e820_add(u64 start, u64 size, u32 type) -{ - dprintf(8, "Add to e820 map: %08llx %08llx %d\n", start, size, type); - - if (! size) - // Huh? Nothing to do. - return; - - // Find position of new item (splitting existing item if needed). - u64 end = start + size; - int i; - for (i=0; i<e820_count; i++) { - struct e820entry *e = &e820_list[i]; - u64 e_end = e->start + e->size; - if (start > e_end) - continue; - // Found position - check if an existing item needs to be split. - if (start > e->start) { - if (type == e->type) { - // Same type - merge them. - size += start - e->start; - start = e->start; - } else { - // Split existing item. - e->size = start - e->start; - i++; - if (e_end > end) - insert_e820(i, end, e_end - end, e->type); - } - } - break; - } - // Remove/adjust existing items that are overlapping. - while (i<e820_count) { - struct e820entry *e = &e820_list[i]; - if (end < e->start) - // No overlap - done. - break; - u64 e_end = e->start + e->size; - if (end >= e_end) { - // Existing item completely overlapped - remove it. - remove_e820(i); - continue; - } - // Not completely overlapped - adjust its start. - e->start = end; - e->size = e_end - end; - if (type == e->type) { - // Same type - merge them. - size += e->size; - remove_e820(i); - } - break; - } - // Insert new item. - if (type != E820_HOLE) - insert_e820(i, start, size, type); - //dump_map(); -} - -// Remove any definitions in a memory range (make a memory hole). -void -e820_remove(u64 start, u64 size) -{ - e820_add(start, size, E820_HOLE); -} - -// Report on final memory locations. -void -e820_prepboot(void) -{ - dump_map(); -} diff --git a/payloads/external/SeaBIOS/src/e820map.h b/payloads/external/SeaBIOS/src/e820map.h deleted file mode 100644 index de8b5230..00000000 --- a/payloads/external/SeaBIOS/src/e820map.h +++ /dev/null @@ -1,26 +0,0 @@ -#ifndef __E820MAP_H -#define __E820MAP_H - -#include "types.h" // u64 - -#define E820_RAM 1 -#define E820_RESERVED 2 -#define E820_ACPI 3 -#define E820_NVS 4 -#define E820_UNUSABLE 5 - -struct e820entry { - u64 start; - u64 size; - u32 type; -}; - -void e820_add(u64 start, u64 size, u32 type); -void e820_remove(u64 start, u64 size); -void e820_prepboot(void); - -// e820 map storage -extern struct e820entry e820_list[]; -extern int e820_count; - -#endif // e820map.h diff --git a/payloads/external/SeaBIOS/src/entryfuncs.S b/payloads/external/SeaBIOS/src/entryfuncs.S deleted file mode 100644 index 7368bb6d..00000000 --- a/payloads/external/SeaBIOS/src/entryfuncs.S +++ /dev/null @@ -1,165 +0,0 @@ -// Macros for entering C code -// -// Copyright (C) 2008-2014 Kevin O'Connor <kevin@koconnor.net> -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - - -/**************************************************************** - * Macros for save and restore of 'struct bregs' registers - ****************************************************************/ - -#define PUSHBREGS_size 32 - - // Save registers (matches struct bregs) to stack - .macro PUSHBREGS - pushl %eax - pushl %ecx - pushl %edx - pushl %ebx - pushl %ebp - pushl %esi - pushl %edi - pushw %es - pushw %ds - .endm - - // Restore registers (from struct bregs) from stack - .macro POPBREGS - popw %ds - popw %es - popl %edi - popl %esi - popl %ebp - popl %ebx - popl %edx - popl %ecx - popl %eax - .endm - - // Save registers to struct bregs at %ds:%eax. The caller - // should "pushw %ds ; pushl %eax" prior to calling - this macro - // will pop them off. - .macro SAVEBREGS_POP_DSEAX - popl BREGS_eax(%eax) - popw BREGS_ds(%eax) - movl %edi, BREGS_edi(%eax) - movl %esi, BREGS_esi(%eax) - movl %ebp, BREGS_ebp(%eax) - movl %ebx, BREGS_ebx(%eax) - movl %edx, BREGS_edx(%eax) - movl %ecx, BREGS_ecx(%eax) - movw %es, BREGS_es(%eax) - .endm - - // Restore registers from struct bregs at %ds:%eax - .macro RESTOREBREGS_DSEAX - movl BREGS_edi(%eax), %edi - movl BREGS_esi(%eax), %esi - movl BREGS_ebp(%eax), %ebp - movl BREGS_ebx(%eax), %ebx - movl BREGS_edx(%eax), %edx - movl BREGS_ecx(%eax), %ecx - movw BREGS_es(%eax), %es - pushl BREGS_eax(%eax) - movw BREGS_ds(%eax), %ds - popl %eax - .endm - - -/**************************************************************** - * Entry macros - ****************************************************************/ - - // Call a C function - this does the minimal work necessary to - // call into C. It sets up %ds, backs up %es, and backs up - // those registers that are call clobbered by the C compiler. - .macro ENTRY cfunc - cli // In case something far-calls instead of using "int" - cld - pushl %eax // Save registers clobbered by C code - pushl %ecx - pushl %edx - pushw %es - pushw %ds - movw %ss, %ax // Move %ss to %ds - movw %ax, %ds - pushl %esp // Backup %esp, then clear high bits - movzwl %sp, %esp - calll \cfunc - popl %esp // Restore %esp (including high bits) - popw %ds // Restore registers saved above - popw %es - popl %edx - popl %ecx - popl %eax - .endm - - // Call a C function with current register list as an - // argument. This backs up the registers and sets %eax - // to point to the backup. On return, the registers are - // restored from the structure. - .macro ENTRY_ARG cfunc - cli - cld - PUSHBREGS - movw %ss, %ax // Move %ss to %ds - movw %ax, %ds - movl %esp, %ebx // Backup %esp, then zero high bits - movzwl %sp, %esp - movl %esp, %eax // First arg is pointer to struct bregs - calll \cfunc - movl %ebx, %esp // Restore %esp (including high bits) - POPBREGS - .endm - - // As above, but get calling function from stack. - .macro ENTRY_ARG_ST - cli - cld - pushl %ecx - pushl %edx - pushl %ebx - pushl %ebp - pushl %esi - pushl %edi - pushw %es - pushw %ds - movw %ss, %cx // Move %ss to %ds - movw %cx, %ds - movl %esp, %ebx // Backup %esp, then zero high bits - movzwl %sp, %esp - movl 28(%esp), %ecx // Get calling function - movl %eax, 28(%esp) // Save %eax - movl %esp, %eax // First arg is pointer to struct bregs - calll *%ecx - movl %ebx, %esp // Restore %esp (including high bits) - POPBREGS - .endm - - // Same as ENTRY_ARG, but don't mangle %esp - .macro ENTRY_ARG_ESP cfunc - cli - cld - PUSHBREGS - movw %ss, %ax // Move %ss to %ds - movw %ax, %ds - movl %esp, %eax // First arg is pointer to struct bregs - calll \cfunc - POPBREGS - .endm - - // Reset stack, transition to 32bit mode, and call a C function. - .macro ENTRY_INTO32 cfunc - xorw %dx, %dx - movw %dx, %ss - movl $ BUILD_STACK_ADDR , %esp - movl $ \cfunc , %edx - jmp transition32 - .endm - - // Declare a function - .macro DECLFUNC func - .section .text.asm.\func - .global \func - .endm diff --git a/payloads/external/SeaBIOS/src/farptr.h b/payloads/external/SeaBIOS/src/farptr.h deleted file mode 100644 index 0a4db68b..00000000 --- a/payloads/external/SeaBIOS/src/farptr.h +++ /dev/null @@ -1,208 +0,0 @@ -// Code to access multiple segments within gcc. -// -// Copyright (C) 2008,2009 Kevin O'Connor <kevin@koconnor.net> -// -// This file may be distributed under the terms of the GNU LGPLv3 license. -#ifndef __FARPTR_H -#define __FARPTR_H - -#include "x86.h" // insb - -// Dummy definitions used to make sure gcc understands dependencies -// between SET_SEG and GET/READ/WRITE_SEG macros. -extern u16 __segment_ES, __segment_CS, __segment_DS, __segment_SS; -extern u16 __segment_FS, __segment_GS; - -// Low level macros for reading/writing memory via a segment selector. -#define READ8_SEG(prefix, SEG, value, var) \ - __asm__(prefix "movb %%" #SEG ":%1, %b0" : "=Qi"(value) \ - : "m"(var), "m"(__segment_ ## SEG)) -#define READ16_SEG(prefix, SEG, value, var) \ - __asm__(prefix "movw %%" #SEG ":%1, %w0" : "=ri"(value) \ - : "m"(var), "m"(__segment_ ## SEG)) -#define READ32_SEG(prefix, SEG, value, var) \ - __asm__(prefix "movl %%" #SEG ":%1, %0" : "=ri"(value) \ - : "m"(var), "m"(__segment_ ## SEG)) -#define READ64_SEG(prefix, SEG, value, var) do { \ - union u64_u32_u __value; \ - union u64_u32_u *__r64_ptr = (union u64_u32_u *)&(var); \ - READ32_SEG(prefix, SEG, __value.lo, __r64_ptr->lo); \ - READ32_SEG(prefix, SEG, __value.hi, __r64_ptr->hi); \ - *(u64*)&(value) = __value.val; \ - } while (0) -#define WRITE8_SEG(prefix, SEG, var, value) \ - __asm__(prefix "movb %b1, %%" #SEG ":%0" : "=m"(var) \ - : "Q"(value), "m"(__segment_ ## SEG)) -#define WRITE16_SEG(prefix, SEG, var, value) \ - __asm__(prefix "movw %w1, %%" #SEG ":%0" : "=m"(var) \ - : "r"(value), "m"(__segment_ ## SEG)) -#define WRITE32_SEG(prefix, SEG, var, value) \ - __asm__(prefix "movl %1, %%" #SEG ":%0" : "=m"(var) \ - : "r"(value), "m"(__segment_ ## SEG)) -#define WRITE64_SEG(prefix, SEG, var, value) do { \ - union u64_u32_u __value; \ - union u64_u32_u *__w64_ptr = (union u64_u32_u *)&(var); \ - typeof(var) __value_tmp = (value); \ - __value.val = *(u64*)&__value_tmp; \ - WRITE32_SEG(prefix, SEG, __w64_ptr->lo, __value.lo); \ - WRITE32_SEG(prefix, SEG, __w64_ptr->hi, __value.hi); \ - } while (0) - -// Macros for automatically choosing the appropriate memory size -// access method. -extern void __force_link_error__unknown_type(void); - -#define __GET_VAR(prefix, seg, var) ({ \ - typeof(var) __val; \ - if (sizeof(__val) == 1) \ - READ8_SEG(prefix, seg, __val, var); \ - else if (sizeof(__val) == 2) \ - READ16_SEG(prefix, seg, __val, var); \ - else if (sizeof(__val) == 4) \ - READ32_SEG(prefix, seg, __val, var); \ - else if (sizeof(__val) == 8) \ - READ64_SEG(prefix, seg, __val, var); \ - else \ - __force_link_error__unknown_type(); \ - __val; }) - -#define __SET_VAR(prefix, seg, var, val) do { \ - if (sizeof(var) == 1) \ - WRITE8_SEG(prefix, seg, var, (val)); \ - else if (sizeof(var) == 2) \ - WRITE16_SEG(prefix, seg, var, (val)); \ - else if (sizeof(var) == 4) \ - WRITE32_SEG(prefix, seg, var, (val)); \ - else if (sizeof(var) == 8) \ - WRITE64_SEG(prefix, seg, var, (val)); \ - else \ - __force_link_error__unknown_type(); \ - } while (0) - -#define DECL_SEGFUNCS(SEG) \ -static inline void __set_seg_##SEG(u16 seg) { \ - __asm__("movw %w1, %%" #SEG : "=m"(__segment_##SEG) \ - : "rm"(seg)); \ -} \ -static inline u16 __get_seg_##SEG(void) { \ - u16 res; \ - __asm__("movw %%" #SEG ", %w0" : "=rm"(res) \ - : "m"(__segment_##SEG)); \ - return res; \ -} -DECL_SEGFUNCS(CS) -DECL_SEGFUNCS(DS) -DECL_SEGFUNCS(ES) -DECL_SEGFUNCS(FS) -DECL_SEGFUNCS(GS) -DECL_SEGFUNCS(SS) - -// Low level macros for getting/setting a segment register. -#define __SET_SEG(SEG, value) \ - __set_seg_##SEG(value) -#define __GET_SEG(SEG) \ - __get_seg_##SEG() - -// Macros for accessing a variable in another segment. (They -// automatically update the %es segment and then make the appropriate -// access.) -#define __GET_FARVAR(seg, var) ({ \ - SET_SEG(ES, (seg)); \ - GET_VAR(ES, (var)); }) -#define __SET_FARVAR(seg, var, val) do { \ - typeof(var) __sfv_val = (val); \ - SET_SEG(ES, (seg)); \ - SET_VAR(ES, (var), __sfv_val); \ - } while (0) - -// Macros for accesssing a 32bit flat mode pointer from 16bit real -// mode. (They automatically update the %es segment, break the -// pointer into segment/offset, and then make the access.) -#define __GET_FLATPTR(ptr) ({ \ - typeof(&(ptr)) __ptr = &(ptr); \ - GET_FARVAR(FLATPTR_TO_SEG(__ptr) \ - , *(typeof(__ptr))FLATPTR_TO_OFFSET(__ptr)); }) -#define __SET_FLATPTR(ptr, val) do { \ - typeof (&(ptr)) __ptr = &(ptr); \ - SET_FARVAR(FLATPTR_TO_SEG(__ptr) \ - , *(typeof(__ptr))FLATPTR_TO_OFFSET(__ptr) \ - , (val)); \ - } while (0) - -// Macros for converting to/from 32bit flat mode pointers to their -// equivalent 16bit segment/offset values. -#define FLATPTR_TO_SEG(p) (((u32)(p)) >> 4) -#define FLATPTR_TO_OFFSET(p) (((u32)(p)) & 0xf) -#define MAKE_FLATPTR(seg,off) ((void*)(((u32)(seg)<<4)+(u32)(off))) - - -#if MODESEGMENT == 1 - -// Definitions when using segmented mode. -#define GET_FARVAR(seg, var) __GET_FARVAR((seg), (var)) -#define SET_FARVAR(seg, var, val) __SET_FARVAR((seg), (var), (val)) -#define GET_VAR(seg, var) __GET_VAR("", seg, (var)) -#define SET_VAR(seg, var, val) __SET_VAR("", seg, (var), (val)) -#define SET_SEG(SEG, value) __SET_SEG(SEG, (value)) -#define GET_SEG(SEG) __GET_SEG(SEG) -#define GET_FLATPTR(ptr) __GET_FLATPTR(ptr) -#define SET_FLATPTR(ptr, val) __SET_FLATPTR((ptr), (val)) - -static inline void insb_fl(u16 port, void *ptr_fl, u16 count) { - SET_SEG(ES, FLATPTR_TO_SEG(ptr_fl)); - insb(port, (u8*)FLATPTR_TO_OFFSET(ptr_fl), count); -} -static inline void insw_fl(u16 port, void *ptr_fl, u16 count) { - SET_SEG(ES, FLATPTR_TO_SEG(ptr_fl)); - insw(port, (u16*)FLATPTR_TO_OFFSET(ptr_fl), count); -} -static inline void insl_fl(u16 port, void *ptr_fl, u16 count) { - SET_SEG(ES, FLATPTR_TO_SEG(ptr_fl)); - insl(port, (u32*)FLATPTR_TO_OFFSET(ptr_fl), count); -} -static inline void outsb_fl(u16 port, void *ptr_fl, u16 count) { - SET_SEG(ES, FLATPTR_TO_SEG(ptr_fl)); - outsb(port, (u8*)FLATPTR_TO_OFFSET(ptr_fl), count); -} -static inline void outsw_fl(u16 port, void *ptr_fl, u16 count) { - SET_SEG(ES, FLATPTR_TO_SEG(ptr_fl)); - outsw(port, (u16*)FLATPTR_TO_OFFSET(ptr_fl), count); -} -static inline void outsl_fl(u16 port, void *ptr_fl, u16 count) { - SET_SEG(ES, FLATPTR_TO_SEG(ptr_fl)); - outsl(port, (u32*)FLATPTR_TO_OFFSET(ptr_fl), count); -} - -#else - -// In 32-bit flat mode there is no need to mess with the segments. -#define GET_FARVAR(seg, var) \ - (*((typeof(&(var)))MAKE_FLATPTR((seg), &(var)))) -#define SET_FARVAR(seg, var, val) \ - do { GET_FARVAR((seg), (var)) = (val); } while (0) -#define GET_VAR(seg, var) (var) -#define SET_VAR(seg, var, val) do { (var) = (val); } while (0) -#define SET_SEG(SEG, value) ((void)(value)) -#define GET_SEG(SEG) 0 -#define GET_FLATPTR(ptr) (ptr) -#define SET_FLATPTR(ptr, val) do { (ptr) = (val); } while (0) - -#define insb_fl(port, ptr_fl, count) insb(port, ptr_fl, count) -#define insw_fl(port, ptr_fl, count) insw(port, ptr_fl, count) -#define insl_fl(port, ptr_fl, count) insl(port, ptr_fl, count) -#define outsb_fl(port, ptr_fl, count) outsb(port, ptr_fl, count) -#define outsw_fl(port, ptr_fl, count) outsw(port, ptr_fl, count) -#define outsl_fl(port, ptr_fl, count) outsl(port, ptr_fl, count) - -#endif - -#define SEGOFF(s,o) ({struct segoff_s __so; __so.offset=(o); __so.seg=(s); __so;}) - -static inline struct segoff_s FLATPTR_TO_SEGOFF(void *p) { - return SEGOFF(FLATPTR_TO_SEG(p), FLATPTR_TO_OFFSET(p)); -} -static inline void *SEGOFF_TO_FLATPTR(struct segoff_s so) { - return MAKE_FLATPTR(so.seg, so.offset); -} - -#endif // farptr.h diff --git a/payloads/external/SeaBIOS/src/font.c b/payloads/external/SeaBIOS/src/font.c deleted file mode 100644 index 67e5d46b..00000000 --- a/payloads/external/SeaBIOS/src/font.c +++ /dev/null @@ -1,139 +0,0 @@ -#include "types.h" // u8 - -// Character Font for 320x200 & 640x200 Graphics (lower 128 characters) - -/* - * This font comes from the fntcol16.zip package (c) by Joseph Gil - * found at ftp://ftp.simtel.net/pub/simtelnet/msdos/screen/fntcol16.zip - * This font is public domain - */ -u8 vgafont8[128*8] VARFSEGFIXED(0xfa6e) = { - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x7e, 0x81, 0xa5, 0x81, 0xbd, 0x99, 0x81, 0x7e, - 0x7e, 0xff, 0xdb, 0xff, 0xc3, 0xe7, 0xff, 0x7e, - 0x6c, 0xfe, 0xfe, 0xfe, 0x7c, 0x38, 0x10, 0x00, - 0x10, 0x38, 0x7c, 0xfe, 0x7c, 0x38, 0x10, 0x00, - 0x38, 0x7c, 0x38, 0xfe, 0xfe, 0x7c, 0x38, 0x7c, - 0x10, 0x10, 0x38, 0x7c, 0xfe, 0x7c, 0x38, 0x7c, - 0x00, 0x00, 0x18, 0x3c, 0x3c, 0x18, 0x00, 0x00, - 0xff, 0xff, 0xe7, 0xc3, 0xc3, 0xe7, 0xff, 0xff, - 0x00, 0x3c, 0x66, 0x42, 0x42, 0x66, 0x3c, 0x00, - 0xff, 0xc3, 0x99, 0xbd, 0xbd, 0x99, 0xc3, 0xff, - 0x0f, 0x07, 0x0f, 0x7d, 0xcc, 0xcc, 0xcc, 0x78, - 0x3c, 0x66, 0x66, 0x66, 0x3c, 0x18, 0x7e, 0x18, - 0x3f, 0x33, 0x3f, 0x30, 0x30, 0x70, 0xf0, 0xe0, - 0x7f, 0x63, 0x7f, 0x63, 0x63, 0x67, 0xe6, 0xc0, - 0x99, 0x5a, 0x3c, 0xe7, 0xe7, 0x3c, 0x5a, 0x99, - 0x80, 0xe0, 0xf8, 0xfe, 0xf8, 0xe0, 0x80, 0x00, - 0x02, 0x0e, 0x3e, 0xfe, 0x3e, 0x0e, 0x02, 0x00, - 0x18, 0x3c, 0x7e, 0x18, 0x18, 0x7e, 0x3c, 0x18, - 0x66, 0x66, 0x66, 0x66, 0x66, 0x00, 0x66, 0x00, - 0x7f, 0xdb, 0xdb, 0x7b, 0x1b, 0x1b, 0x1b, 0x00, - 0x3e, 0x63, 0x38, 0x6c, 0x6c, 0x38, 0xcc, 0x78, - 0x00, 0x00, 0x00, 0x00, 0x7e, 0x7e, 0x7e, 0x00, - 0x18, 0x3c, 0x7e, 0x18, 0x7e, 0x3c, 0x18, 0xff, - 0x18, 0x3c, 0x7e, 0x18, 0x18, 0x18, 0x18, 0x00, - 0x18, 0x18, 0x18, 0x18, 0x7e, 0x3c, 0x18, 0x00, - 0x00, 0x18, 0x0c, 0xfe, 0x0c, 0x18, 0x00, 0x00, - 0x00, 0x30, 0x60, 0xfe, 0x60, 0x30, 0x00, 0x00, - 0x00, 0x00, 0xc0, 0xc0, 0xc0, 0xfe, 0x00, 0x00, - 0x00, 0x24, 0x66, 0xff, 0x66, 0x24, 0x00, 0x00, - 0x00, 0x18, 0x3c, 0x7e, 0xff, 0xff, 0x00, 0x00, - 0x00, 0xff, 0xff, 0x7e, 0x3c, 0x18, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x30, 0x78, 0x78, 0x30, 0x30, 0x00, 0x30, 0x00, - 0x6c, 0x6c, 0x6c, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x6c, 0x6c, 0xfe, 0x6c, 0xfe, 0x6c, 0x6c, 0x00, - 0x30, 0x7c, 0xc0, 0x78, 0x0c, 0xf8, 0x30, 0x00, - 0x00, 0xc6, 0xcc, 0x18, 0x30, 0x66, 0xc6, 0x00, - 0x38, 0x6c, 0x38, 0x76, 0xdc, 0xcc, 0x76, 0x00, - 0x60, 0x60, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x18, 0x30, 0x60, 0x60, 0x60, 0x30, 0x18, 0x00, - 0x60, 0x30, 0x18, 0x18, 0x18, 0x30, 0x60, 0x00, - 0x00, 0x66, 0x3c, 0xff, 0x3c, 0x66, 0x00, 0x00, - 0x00, 0x30, 0x30, 0xfc, 0x30, 0x30, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x30, 0x60, - 0x00, 0x00, 0x00, 0xfc, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x30, 0x00, - 0x06, 0x0c, 0x18, 0x30, 0x60, 0xc0, 0x80, 0x00, - 0x7c, 0xc6, 0xce, 0xde, 0xf6, 0xe6, 0x7c, 0x00, - 0x30, 0x70, 0x30, 0x30, 0x30, 0x30, 0xfc, 0x00, - 0x78, 0xcc, 0x0c, 0x38, 0x60, 0xcc, 0xfc, 0x00, - 0x78, 0xcc, 0x0c, 0x38, 0x0c, 0xcc, 0x78, 0x00, - 0x1c, 0x3c, 0x6c, 0xcc, 0xfe, 0x0c, 0x1e, 0x00, - 0xfc, 0xc0, 0xf8, 0x0c, 0x0c, 0xcc, 0x78, 0x00, - 0x38, 0x60, 0xc0, 0xf8, 0xcc, 0xcc, 0x78, 0x00, - 0xfc, 0xcc, 0x0c, 0x18, 0x30, 0x30, 0x30, 0x00, - 0x78, 0xcc, 0xcc, 0x78, 0xcc, 0xcc, 0x78, 0x00, - 0x78, 0xcc, 0xcc, 0x7c, 0x0c, 0x18, 0x70, 0x00, - 0x00, 0x30, 0x30, 0x00, 0x00, 0x30, 0x30, 0x00, - 0x00, 0x30, 0x30, 0x00, 0x00, 0x30, 0x30, 0x60, - 0x18, 0x30, 0x60, 0xc0, 0x60, 0x30, 0x18, 0x00, - 0x00, 0x00, 0xfc, 0x00, 0x00, 0xfc, 0x00, 0x00, - 0x60, 0x30, 0x18, 0x0c, 0x18, 0x30, 0x60, 0x00, - 0x78, 0xcc, 0x0c, 0x18, 0x30, 0x00, 0x30, 0x00, - 0x7c, 0xc6, 0xde, 0xde, 0xde, 0xc0, 0x78, 0x00, - 0x30, 0x78, 0xcc, 0xcc, 0xfc, 0xcc, 0xcc, 0x00, - 0xfc, 0x66, 0x66, 0x7c, 0x66, 0x66, 0xfc, 0x00, - 0x3c, 0x66, 0xc0, 0xc0, 0xc0, 0x66, 0x3c, 0x00, - 0xf8, 0x6c, 0x66, 0x66, 0x66, 0x6c, 0xf8, 0x00, - 0xfe, 0x62, 0x68, 0x78, 0x68, 0x62, 0xfe, 0x00, - 0xfe, 0x62, 0x68, 0x78, 0x68, 0x60, 0xf0, 0x00, - 0x3c, 0x66, 0xc0, 0xc0, 0xce, 0x66, 0x3e, 0x00, - 0xcc, 0xcc, 0xcc, 0xfc, 0xcc, 0xcc, 0xcc, 0x00, - 0x78, 0x30, 0x30, 0x30, 0x30, 0x30, 0x78, 0x00, - 0x1e, 0x0c, 0x0c, 0x0c, 0xcc, 0xcc, 0x78, 0x00, - 0xe6, 0x66, 0x6c, 0x78, 0x6c, 0x66, 0xe6, 0x00, - 0xf0, 0x60, 0x60, 0x60, 0x62, 0x66, 0xfe, 0x00, - 0xc6, 0xee, 0xfe, 0xfe, 0xd6, 0xc6, 0xc6, 0x00, - 0xc6, 0xe6, 0xf6, 0xde, 0xce, 0xc6, 0xc6, 0x00, - 0x38, 0x6c, 0xc6, 0xc6, 0xc6, 0x6c, 0x38, 0x00, - 0xfc, 0x66, 0x66, 0x7c, 0x60, 0x60, 0xf0, 0x00, - 0x78, 0xcc, 0xcc, 0xcc, 0xdc, 0x78, 0x1c, 0x00, - 0xfc, 0x66, 0x66, 0x7c, 0x6c, 0x66, 0xe6, 0x00, - 0x78, 0xcc, 0xe0, 0x70, 0x1c, 0xcc, 0x78, 0x00, - 0xfc, 0xb4, 0x30, 0x30, 0x30, 0x30, 0x78, 0x00, - 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0xfc, 0x00, - 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0x78, 0x30, 0x00, - 0xc6, 0xc6, 0xc6, 0xd6, 0xfe, 0xee, 0xc6, 0x00, - 0xc6, 0xc6, 0x6c, 0x38, 0x38, 0x6c, 0xc6, 0x00, - 0xcc, 0xcc, 0xcc, 0x78, 0x30, 0x30, 0x78, 0x00, - 0xfe, 0xc6, 0x8c, 0x18, 0x32, 0x66, 0xfe, 0x00, - 0x78, 0x60, 0x60, 0x60, 0x60, 0x60, 0x78, 0x00, - 0xc0, 0x60, 0x30, 0x18, 0x0c, 0x06, 0x02, 0x00, - 0x78, 0x18, 0x18, 0x18, 0x18, 0x18, 0x78, 0x00, - 0x10, 0x38, 0x6c, 0xc6, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, - 0x30, 0x30, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x78, 0x0c, 0x7c, 0xcc, 0x76, 0x00, - 0xe0, 0x60, 0x60, 0x7c, 0x66, 0x66, 0xdc, 0x00, - 0x00, 0x00, 0x78, 0xcc, 0xc0, 0xcc, 0x78, 0x00, - 0x1c, 0x0c, 0x0c, 0x7c, 0xcc, 0xcc, 0x76, 0x00, - 0x00, 0x00, 0x78, 0xcc, 0xfc, 0xc0, 0x78, 0x00, - 0x38, 0x6c, 0x60, 0xf0, 0x60, 0x60, 0xf0, 0x00, - 0x00, 0x00, 0x76, 0xcc, 0xcc, 0x7c, 0x0c, 0xf8, - 0xe0, 0x60, 0x6c, 0x76, 0x66, 0x66, 0xe6, 0x00, - 0x30, 0x00, 0x70, 0x30, 0x30, 0x30, 0x78, 0x00, - 0x0c, 0x00, 0x0c, 0x0c, 0x0c, 0xcc, 0xcc, 0x78, - 0xe0, 0x60, 0x66, 0x6c, 0x78, 0x6c, 0xe6, 0x00, - 0x70, 0x30, 0x30, 0x30, 0x30, 0x30, 0x78, 0x00, - 0x00, 0x00, 0xcc, 0xfe, 0xfe, 0xd6, 0xc6, 0x00, - 0x00, 0x00, 0xf8, 0xcc, 0xcc, 0xcc, 0xcc, 0x00, - 0x00, 0x00, 0x78, 0xcc, 0xcc, 0xcc, 0x78, 0x00, - 0x00, 0x00, 0xdc, 0x66, 0x66, 0x7c, 0x60, 0xf0, - 0x00, 0x00, 0x76, 0xcc, 0xcc, 0x7c, 0x0c, 0x1e, - 0x00, 0x00, 0xdc, 0x76, 0x66, 0x60, 0xf0, 0x00, - 0x00, 0x00, 0x7c, 0xc0, 0x78, 0x0c, 0xf8, 0x00, - 0x10, 0x30, 0x7c, 0x30, 0x30, 0x34, 0x18, 0x00, - 0x00, 0x00, 0xcc, 0xcc, 0xcc, 0xcc, 0x76, 0x00, - 0x00, 0x00, 0xcc, 0xcc, 0xcc, 0x78, 0x30, 0x00, - 0x00, 0x00, 0xc6, 0xd6, 0xfe, 0xfe, 0x6c, 0x00, - 0x00, 0x00, 0xc6, 0x6c, 0x38, 0x6c, 0xc6, 0x00, - 0x00, 0x00, 0xcc, 0xcc, 0xcc, 0x7c, 0x0c, 0xf8, - 0x00, 0x00, 0xfc, 0x98, 0x30, 0x64, 0xfc, 0x00, - 0x1c, 0x30, 0x30, 0xe0, 0x30, 0x30, 0x1c, 0x00, - 0x18, 0x18, 0x18, 0x00, 0x18, 0x18, 0x18, 0x00, - 0xe0, 0x30, 0x30, 0x1c, 0x30, 0x30, 0xe0, 0x00, - 0x76, 0xdc, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x10, 0x38, 0x6c, 0xc6, 0xc6, 0xfe, 0x00, -}; diff --git a/payloads/external/SeaBIOS/src/fw/acpi-dsdt-cpu-hotplug.dsl b/payloads/external/SeaBIOS/src/fw/acpi-dsdt-cpu-hotplug.dsl deleted file mode 100644 index 0f3e83b1..00000000 --- a/payloads/external/SeaBIOS/src/fw/acpi-dsdt-cpu-hotplug.dsl +++ /dev/null @@ -1,78 +0,0 @@ -/**************************************************************** - * CPU hotplug - ****************************************************************/ - -Scope(\_SB) { - /* Objects filled in by run-time generated SSDT */ - External(NTFY, MethodObj) - External(CPON, PkgObj) - - /* Methods called by run-time generated SSDT Processor objects */ - Method(CPMA, 1, NotSerialized) { - // _MAT method - create an madt apic buffer - // Arg0 = Processor ID = Local APIC ID - // Local0 = CPON flag for this cpu - Store(DerefOf(Index(CPON, Arg0)), Local0) - // Local1 = Buffer (in madt apic form) to return - Store(Buffer(8) {0x00, 0x08, 0x00, 0x00, 0x00, 0, 0, 0}, Local1) - // Update the processor id, lapic id, and enable/disable status - Store(Arg0, Index(Local1, 2)) - Store(Arg0, Index(Local1, 3)) - Store(Local0, Index(Local1, 4)) - Return (Local1) - } - Method(CPST, 1, NotSerialized) { - // _STA method - return ON status of cpu - // Arg0 = Processor ID = Local APIC ID - // Local0 = CPON flag for this cpu - Store(DerefOf(Index(CPON, Arg0)), Local0) - If (Local0) { - Return (0xF) - } Else { - Return (0x0) - } - } - Method(CPEJ, 2, NotSerialized) { - // _EJ0 method - eject callback - Sleep(200) - } - - /* CPU hotplug notify method */ - OperationRegion(PRST, SystemIO, 0xaf00, 32) - Field(PRST, ByteAcc, NoLock, Preserve) { - PRS, 256 - } - Method(PRSC, 0) { - // Local5 = active cpu bitmap - Store(PRS, Local5) - // Local2 = last read byte from bitmap - Store(Zero, Local2) - // Local0 = Processor ID / APIC ID iterator - Store(Zero, Local0) - While (LLess(Local0, SizeOf(CPON))) { - // Local1 = CPON flag for this cpu - Store(DerefOf(Index(CPON, Local0)), Local1) - If (And(Local0, 0x07)) { - // Shift down previously read bitmap byte - ShiftRight(Local2, 1, Local2) - } Else { - // Read next byte from cpu bitmap - Store(DerefOf(Index(Local5, ShiftRight(Local0, 3))), Local2) - } - // Local3 = active state for this cpu - Store(And(Local2, 1), Local3) - - If (LNotEqual(Local1, Local3)) { - // State change - update CPON with new state - Store(Local3, Index(CPON, Local0)) - // Do CPU notify - If (LEqual(Local3, 1)) { - NTFY(Local0, 1) - } Else { - NTFY(Local0, 3) - } - } - Increment(Local0) - } - } -} diff --git a/payloads/external/SeaBIOS/src/fw/acpi-dsdt-dbug.dsl b/payloads/external/SeaBIOS/src/fw/acpi-dsdt-dbug.dsl deleted file mode 100644 index 276321f6..00000000 --- a/payloads/external/SeaBIOS/src/fw/acpi-dsdt-dbug.dsl +++ /dev/null @@ -1,26 +0,0 @@ -/**************************************************************** - * Debugging - ****************************************************************/ - -Scope(\) { - /* Debug Output */ - OperationRegion(DBG, SystemIO, 0x0402, 0x01) - Field(DBG, ByteAcc, NoLock, Preserve) { - DBGB, 8, - } - - /* Debug method - use this method to send output to the QEMU - * BIOS debug port. This method handles strings, integers, - * and buffers. For example: DBUG("abc") DBUG(0x123) */ - Method(DBUG, 1) { - ToHexString(Arg0, Local0) - ToBuffer(Local0, Local0) - Subtract(SizeOf(Local0), 1, Local1) - Store(Zero, Local2) - While (LLess(Local2, Local1)) { - Store(DerefOf(Index(Local0, Local2)), DBGB) - Increment(Local2) - } - Store(0x0A, DBGB) - } -} diff --git a/payloads/external/SeaBIOS/src/fw/acpi-dsdt-hpet.dsl b/payloads/external/SeaBIOS/src/fw/acpi-dsdt-hpet.dsl deleted file mode 100644 index f33e5279..00000000 --- a/payloads/external/SeaBIOS/src/fw/acpi-dsdt-hpet.dsl +++ /dev/null @@ -1,36 +0,0 @@ -/**************************************************************** - * HPET - ****************************************************************/ - -Scope(\_SB) { - Device(HPET) { - Name(_HID, EISAID("PNP0103")) - Name(_UID, 0) - OperationRegion(HPTM, SystemMemory, 0xFED00000, 0x400) - Field(HPTM, DWordAcc, Lock, Preserve) { - VEND, 32, - PRD, 32, - } - Method(_STA, 0, NotSerialized) { - Store(VEND, Local0) - Store(PRD, Local1) - ShiftRight(Local0, 16, Local0) - If (LOr(LEqual(Local0, 0), LEqual(Local0, 0xffff))) { - Return (0x0) - } - If (LOr(LEqual(Local1, 0), LGreater(Local1, 100000000))) { - Return (0x0) - } - Return (0x0F) - } - Name(_CRS, ResourceTemplate() { -#if 0 /* This makes WinXP BSOD for not yet figured reasons. */ - IRQNoFlags() {2, 8} -#endif - Memory32Fixed(ReadOnly, - 0xFED00000, // Address Base - 0x00000400, // Address Length - ) - }) - } -} diff --git a/payloads/external/SeaBIOS/src/fw/acpi-dsdt-isa.dsl b/payloads/external/SeaBIOS/src/fw/acpi-dsdt-isa.dsl deleted file mode 100644 index 23761dbb..00000000 --- a/payloads/external/SeaBIOS/src/fw/acpi-dsdt-isa.dsl +++ /dev/null @@ -1,102 +0,0 @@ -/* Common legacy ISA style devices. */ -Scope(\_SB.PCI0.ISA) { - - Device(RTC) { - Name(_HID, EisaId("PNP0B00")) - Name(_CRS, ResourceTemplate() { - IO(Decode16, 0x0070, 0x0070, 0x10, 0x02) - IRQNoFlags() { 8 } - IO(Decode16, 0x0072, 0x0072, 0x02, 0x06) - }) - } - - Device(KBD) { - Name(_HID, EisaId("PNP0303")) - Method(_STA, 0, NotSerialized) { - Return (0x0f) - } - Name(_CRS, ResourceTemplate() { - IO(Decode16, 0x0060, 0x0060, 0x01, 0x01) - IO(Decode16, 0x0064, 0x0064, 0x01, 0x01) - IRQNoFlags() { 1 } - }) - } - - Device(MOU) { - Name(_HID, EisaId("PNP0F13")) - Method(_STA, 0, NotSerialized) { - Return (0x0f) - } - Name(_CRS, ResourceTemplate() { - IRQNoFlags() { 12 } - }) - } - - Device(FDC0) { - Name(_HID, EisaId("PNP0700")) - Method(_STA, 0, NotSerialized) { - Store(FDEN, Local0) - If (LEqual(Local0, 0)) { - Return (0x00) - } Else { - Return (0x0F) - } - } - Name(_CRS, ResourceTemplate() { - IO(Decode16, 0x03F2, 0x03F2, 0x00, 0x04) - IO(Decode16, 0x03F7, 0x03F7, 0x00, 0x01) - IRQNoFlags() { 6 } - DMA(Compatibility, NotBusMaster, Transfer8) { 2 } - }) - } - - Device(LPT) { - Name(_HID, EisaId("PNP0400")) - Method(_STA, 0, NotSerialized) { - Store(LPEN, Local0) - If (LEqual(Local0, 0)) { - Return (0x00) - } Else { - Return (0x0F) - } - } - Name(_CRS, ResourceTemplate() { - IO(Decode16, 0x0378, 0x0378, 0x08, 0x08) - IRQNoFlags() { 7 } - }) - } - - Device(COM1) { - Name(_HID, EisaId("PNP0501")) - Name(_UID, 0x01) - Method(_STA, 0, NotSerialized) { - Store(CAEN, Local0) - If (LEqual(Local0, 0)) { - Return (0x00) - } Else { - Return (0x0F) - } - } - Name(_CRS, ResourceTemplate() { - IO(Decode16, 0x03F8, 0x03F8, 0x00, 0x08) - IRQNoFlags() { 4 } - }) - } - - Device(COM2) { - Name(_HID, EisaId("PNP0501")) - Name(_UID, 0x02) - Method(_STA, 0, NotSerialized) { - Store(CBEN, Local0) - If (LEqual(Local0, 0)) { - Return (0x00) - } Else { - Return (0x0F) - } - } - Name(_CRS, ResourceTemplate() { - IO(Decode16, 0x02F8, 0x02F8, 0x00, 0x08) - IRQNoFlags() { 3 } - }) - } -} diff --git a/payloads/external/SeaBIOS/src/fw/acpi-dsdt-pci-crs.dsl b/payloads/external/SeaBIOS/src/fw/acpi-dsdt-pci-crs.dsl deleted file mode 100644 index d4218914..00000000 --- a/payloads/external/SeaBIOS/src/fw/acpi-dsdt-pci-crs.dsl +++ /dev/null @@ -1,90 +0,0 @@ -/* PCI CRS (current resources) definition. */ -Scope(\_SB.PCI0) { - - Name(CRES, ResourceTemplate() { - WordBusNumber(ResourceProducer, MinFixed, MaxFixed, PosDecode, - 0x0000, // Address Space Granularity - 0x0000, // Address Range Minimum - 0x00FF, // Address Range Maximum - 0x0000, // Address Translation Offset - 0x0100, // Address Length - ,, ) - IO(Decode16, - 0x0CF8, // Address Range Minimum - 0x0CF8, // Address Range Maximum - 0x01, // Address Alignment - 0x08, // Address Length - ) - WordIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, // Address Space Granularity - 0x0000, // Address Range Minimum - 0x0CF7, // Address Range Maximum - 0x0000, // Address Translation Offset - 0x0CF8, // Address Length - ,, , TypeStatic) - WordIO(ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, - 0x0000, // Address Space Granularity - 0x0D00, // Address Range Minimum - 0xFFFF, // Address Range Maximum - 0x0000, // Address Translation Offset - 0xF300, // Address Length - ,, , TypeStatic) - DWordMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0x00000000, // Address Space Granularity - 0x000A0000, // Address Range Minimum - 0x000BFFFF, // Address Range Maximum - 0x00000000, // Address Translation Offset - 0x00020000, // Address Length - ,, , AddressRangeMemory, TypeStatic) - DWordMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, NonCacheable, ReadWrite, - 0x00000000, // Address Space Granularity - 0xE0000000, // Address Range Minimum - 0xFEBFFFFF, // Address Range Maximum - 0x00000000, // Address Translation Offset - 0x1EC00000, // Address Length - ,, PW32, AddressRangeMemory, TypeStatic) - }) - - Name(CR64, ResourceTemplate() { - QWordMemory(ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite, - 0x00000000, // Address Space Granularity - 0x8000000000, // Address Range Minimum - 0xFFFFFFFFFF, // Address Range Maximum - 0x00000000, // Address Translation Offset - 0x8000000000, // Address Length - ,, PW64, AddressRangeMemory, TypeStatic) - }) - - Method(_CRS, 0) { - /* Fields provided by dynamically created ssdt */ - External(P0S, IntObj) - External(P0E, IntObj) - External(P1V, IntObj) - External(P1S, BuffObj) - External(P1E, BuffObj) - External(P1L, BuffObj) - - /* fixup 32bit pci io window */ - CreateDWordField(CRES, \_SB.PCI0.PW32._MIN, PS32) - CreateDWordField(CRES, \_SB.PCI0.PW32._MAX, PE32) - CreateDWordField(CRES, \_SB.PCI0.PW32._LEN, PL32) - Store(P0S, PS32) - Store(P0E, PE32) - Store(Add(Subtract(P0E, P0S), 1), PL32) - - If (LEqual(P1V, Zero)) { - Return (CRES) - } - - /* fixup 64bit pci io window */ - CreateQWordField(CR64, \_SB.PCI0.PW64._MIN, PS64) - CreateQWordField(CR64, \_SB.PCI0.PW64._MAX, PE64) - CreateQWordField(CR64, \_SB.PCI0.PW64._LEN, PL64) - Store(P1S, PS64) - Store(P1E, PE64) - Store(P1L, PL64) - /* add window and return result */ - ConcatenateResTemplate(CRES, CR64, Local0) - Return (Local0) - } -} diff --git a/payloads/external/SeaBIOS/src/fw/acpi-dsdt.dsl b/payloads/external/SeaBIOS/src/fw/acpi-dsdt.dsl deleted file mode 100644 index 3556dcaf..00000000 --- a/payloads/external/SeaBIOS/src/fw/acpi-dsdt.dsl +++ /dev/null @@ -1,342 +0,0 @@ -/* - * Bochs/QEMU ACPI DSDT ASL definition - * - * Copyright (c) 2006 Fabrice Bellard - * - * This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU Lesser General Public - * License version 2 as published by the Free Software Foundation. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * Lesser General Public License for more details. - * - * You should have received a copy of the GNU Lesser General Public - * License along with this library; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -ACPI_EXTRACT_ALL_CODE AmlCode - -DefinitionBlock ( - "acpi-dsdt.aml", // Output Filename - "DSDT", // Signature - 0x01, // DSDT Compliance Revision - "BXPC", // OEMID - "BXDSDT", // TABLE ID - 0x1 // OEM Revision - ) -{ - -#include "acpi-dsdt-dbug.dsl" - - -/**************************************************************** - * PCI Bus definition - ****************************************************************/ - - Scope(\_SB) { - Device(PCI0) { - Name(_HID, EisaId("PNP0A03")) - Name(_ADR, 0x00) - Name(_UID, 1) - } - } - -#include "acpi-dsdt-pci-crs.dsl" -#include "acpi-dsdt-hpet.dsl" - - -/**************************************************************** - * VGA - ****************************************************************/ - - Scope(\_SB.PCI0) { - Device(VGA) { - Name(_ADR, 0x00020000) - OperationRegion(PCIC, PCI_Config, Zero, 0x4) - Field(PCIC, DWordAcc, NoLock, Preserve) { - VEND, 32 - } - Method(_S1D, 0, NotSerialized) { - Return (0x00) - } - Method(_S2D, 0, NotSerialized) { - Return (0x00) - } - Method(_S3D, 0, NotSerialized) { - If (LEqual(VEND, 0x1001b36)) { - Return (0x03) // QXL - } Else { - Return (0x00) - } - } - } - } - - -/**************************************************************** - * PIIX4 PM - ****************************************************************/ - - Scope(\_SB.PCI0) { - Device(PX13) { - Name(_ADR, 0x00010003) - OperationRegion(P13C, PCI_Config, 0x00, 0xff) - } - } - - -/**************************************************************** - * PIIX3 ISA bridge - ****************************************************************/ - - Scope(\_SB.PCI0) { - Device(ISA) { - Name(_ADR, 0x00010000) - - /* PIIX PCI to ISA irq remapping */ - OperationRegion(P40C, PCI_Config, 0x60, 0x04) - - /* enable bits */ - Field(\_SB.PCI0.PX13.P13C, AnyAcc, NoLock, Preserve) { - Offset(0x5f), - , 7, - LPEN, 1, // LPT - Offset(0x67), - , 3, - CAEN, 1, // COM1 - , 3, - CBEN, 1, // COM2 - } - Name(FDEN, 1) - } - } - -#include "acpi-dsdt-isa.dsl" - - -/**************************************************************** - * PCI hotplug - ****************************************************************/ - - Scope(\_SB.PCI0) { - OperationRegion(PCST, SystemIO, 0xae00, 0x08) - Field(PCST, DWordAcc, NoLock, WriteAsZeros) { - PCIU, 32, - PCID, 32, - } - - OperationRegion(SEJ, SystemIO, 0xae08, 0x04) - Field(SEJ, DWordAcc, NoLock, WriteAsZeros) { - B0EJ, 32, - } - - /* Methods called by bulk generated PCI devices below */ - - /* Methods called by hotplug devices */ - Method(PCEJ, 1, NotSerialized) { - // _EJ0 method - eject callback - Store(ShiftLeft(1, Arg0), B0EJ) - } - - /* Hotplug notification method supplied by SSDT */ - External(\_SB.PCI0.PCNT, MethodObj) - - /* PCI hotplug notify method */ - Method(PCNF, 0) { - // Local0 = iterator - Store(Zero, Local0) - While (LLess(Local0, 31)) { - Increment(Local0) - If (And(PCIU, ShiftLeft(1, Local0))) { - PCNT(Local0, 1) - } - If (And(PCID, ShiftLeft(1, Local0))) { - PCNT(Local0, 3) - } - } - } - } - - -/**************************************************************** - * PCI IRQs - ****************************************************************/ - - Scope(\_SB) { - Scope(PCI0) { - Name(_PRT, Package() { - /* PCI IRQ routing table, example from ACPI 2.0a specification, - section 6.2.8.1 */ - /* Note: we provide the same info as the PCI routing - table of the Bochs BIOS */ - -#define prt_slot(nr, lnk0, lnk1, lnk2, lnk3) \ - Package() { nr##ffff, 0, lnk0, 0 }, \ - Package() { nr##ffff, 1, lnk1, 0 }, \ - Package() { nr##ffff, 2, lnk2, 0 }, \ - Package() { nr##ffff, 3, lnk3, 0 } - -#define prt_slot0(nr) prt_slot(nr, LNKD, LNKA, LNKB, LNKC) -#define prt_slot1(nr) prt_slot(nr, LNKA, LNKB, LNKC, LNKD) -#define prt_slot2(nr) prt_slot(nr, LNKB, LNKC, LNKD, LNKA) -#define prt_slot3(nr) prt_slot(nr, LNKC, LNKD, LNKA, LNKB) - - prt_slot0(0x0000), - /* Device 1 is power mgmt device, and can only use irq 9 */ - prt_slot(0x0001, LNKS, LNKB, LNKC, LNKD), - prt_slot2(0x0002), - prt_slot3(0x0003), - prt_slot0(0x0004), - prt_slot1(0x0005), - prt_slot2(0x0006), - prt_slot3(0x0007), - prt_slot0(0x0008), - prt_slot1(0x0009), - prt_slot2(0x000a), - prt_slot3(0x000b), - prt_slot0(0x000c), - prt_slot1(0x000d), - prt_slot2(0x000e), - prt_slot3(0x000f), - prt_slot0(0x0010), - prt_slot1(0x0011), - prt_slot2(0x0012), - prt_slot3(0x0013), - prt_slot0(0x0014), - prt_slot1(0x0015), - prt_slot2(0x0016), - prt_slot3(0x0017), - prt_slot0(0x0018), - prt_slot1(0x0019), - prt_slot2(0x001a), - prt_slot3(0x001b), - prt_slot0(0x001c), - prt_slot1(0x001d), - prt_slot2(0x001e), - prt_slot3(0x001f), - }) - } - - Field(PCI0.ISA.P40C, ByteAcc, NoLock, Preserve) { - PRQ0, 8, - PRQ1, 8, - PRQ2, 8, - PRQ3, 8 - } - - Method(IQST, 1, NotSerialized) { - // _STA method - get status - If (And(0x80, Arg0)) { - Return (0x09) - } - Return (0x0B) - } - Method(IQCR, 1, Serialized) { - // _CRS method - get current settings - Name(PRR0, ResourceTemplate() { - Interrupt(, Level, ActiveHigh, Shared) { 0 } - }) - CreateDWordField(PRR0, 0x05, PRRI) - If (LLess(Arg0, 0x80)) { - Store(Arg0, PRRI) - } - Return (PRR0) - } - -#define define_link(link, uid, reg) \ - Device(link) { \ - Name(_HID, EISAID("PNP0C0F")) \ - Name(_UID, uid) \ - Name(_PRS, ResourceTemplate() { \ - Interrupt(, Level, ActiveHigh, Shared) { \ - 5, 10, 11 \ - } \ - }) \ - Method(_STA, 0, NotSerialized) { \ - Return (IQST(reg)) \ - } \ - Method(_DIS, 0, NotSerialized) { \ - Or(reg, 0x80, reg) \ - } \ - Method(_CRS, 0, NotSerialized) { \ - Return (IQCR(reg)) \ - } \ - Method(_SRS, 1, NotSerialized) { \ - CreateDWordField(Arg0, 0x05, PRRI) \ - Store(PRRI, reg) \ - } \ - } - - define_link(LNKA, 0, PRQ0) - define_link(LNKB, 1, PRQ1) - define_link(LNKC, 2, PRQ2) - define_link(LNKD, 3, PRQ3) - - Device(LNKS) { - Name(_HID, EISAID("PNP0C0F")) - Name(_UID, 4) - Name(_PRS, ResourceTemplate() { - Interrupt(, Level, ActiveHigh, Shared) { 9 } - }) - - // The SCI cannot be disabled and is always attached to GSI 9, - // so these are no-ops. We only need this link to override the - // polarity to active high and match the content of the MADT. - Method(_STA, 0, NotSerialized) { Return (0x0b) } - Method(_DIS, 0, NotSerialized) { } - Method(_CRS, 0, NotSerialized) { Return (_PRS) } - Method(_SRS, 1, NotSerialized) { } - } - } - -#include "acpi-dsdt-cpu-hotplug.dsl" - - -/**************************************************************** - * General purpose events - ****************************************************************/ - - Scope(\_GPE) { - Name(_HID, "ACPI0006") - - Method(_L00) { - } - Method(_E01) { - // PCI hotplug event - \_SB.PCI0.PCNF() - } - Method(_E02) { - // CPU hotplug event - \_SB.PRSC() - } - Method(_L03) { - } - Method(_L04) { - } - Method(_L05) { - } - Method(_L06) { - } - Method(_L07) { - } - Method(_L08) { - } - Method(_L09) { - } - Method(_L0A) { - } - Method(_L0B) { - } - Method(_L0C) { - } - Method(_L0D) { - } - Method(_L0E) { - } - Method(_L0F) { - } - } -} diff --git a/payloads/external/SeaBIOS/src/fw/acpi-dsdt.hex b/payloads/external/SeaBIOS/src/fw/acpi-dsdt.hex deleted file mode 100644 index 6a113cdd..00000000 --- a/payloads/external/SeaBIOS/src/fw/acpi-dsdt.hex +++ /dev/null @@ -1,554 +0,0 @@ -/* DO NOT EDIT! This is an autogenerated file. See scripts/acpi_extract.py. */ -static unsigned char AmlCode[] = { - 0x44, 0x53, 0x44, 0x54, 0x35, 0x11, 0x00, 0x00, - 0x01, 0x8b, 0x42, 0x58, 0x50, 0x43, 0x00, 0x00, - 0x42, 0x58, 0x44, 0x53, 0x44, 0x54, 0x00, 0x00, - 0x01, 0x00, 0x00, 0x00, 0x49, 0x4e, 0x54, 0x4c, - 0x18, 0x08, 0x15, 0x20, 0x10, 0x49, 0x04, 0x5c, - 0x00, 0x5b, 0x80, 0x44, 0x42, 0x47, 0x5f, 0x01, - 0x0b, 0x02, 0x04, 0x01, 0x5b, 0x81, 0x0b, 0x44, - 0x42, 0x47, 0x5f, 0x01, 0x44, 0x42, 0x47, 0x42, - 0x08, 0x14, 0x2c, 0x44, 0x42, 0x55, 0x47, 0x01, - 0x98, 0x68, 0x60, 0x96, 0x60, 0x60, 0x74, 0x87, - 0x60, 0x01, 0x61, 0x70, 0x00, 0x62, 0xa2, 0x10, - 0x95, 0x62, 0x61, 0x70, 0x83, 0x88, 0x60, 0x62, - 0x00, 0x44, 0x42, 0x47, 0x42, 0x75, 0x62, 0x70, - 0x0a, 0x0a, 0x44, 0x42, 0x47, 0x42, 0x10, 0x22, - 0x5f, 0x53, 0x42, 0x5f, 0x5b, 0x82, 0x1b, 0x50, - 0x43, 0x49, 0x30, 0x08, 0x5f, 0x48, 0x49, 0x44, - 0x0c, 0x41, 0xd0, 0x0a, 0x03, 0x08, 0x5f, 0x41, - 0x44, 0x52, 0x00, 0x08, 0x5f, 0x55, 0x49, 0x44, - 0x01, 0x10, 0x4e, 0x15, 0x2e, 0x5f, 0x53, 0x42, - 0x5f, 0x50, 0x43, 0x49, 0x30, 0x08, 0x43, 0x52, - 0x45, 0x53, 0x11, 0x42, 0x07, 0x0a, 0x6e, 0x88, - 0x0d, 0x00, 0x02, 0x0c, 0x00, 0x00, 0x00, 0x00, - 0x00, 0xff, 0x00, 0x00, 0x00, 0x00, 0x01, 0x47, - 0x01, 0xf8, 0x0c, 0xf8, 0x0c, 0x01, 0x08, 0x88, - 0x0d, 0x00, 0x01, 0x0c, 0x03, 0x00, 0x00, 0x00, - 0x00, 0xf7, 0x0c, 0x00, 0x00, 0xf8, 0x0c, 0x88, - 0x0d, 0x00, 0x01, 0x0c, 0x03, 0x00, 0x00, 0x00, - 0x0d, 0xff, 0xff, 0x00, 0x00, 0x00, 0xf3, 0x87, - 0x17, 0x00, 0x00, 0x0c, 0x03, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x0a, 0x00, 0xff, 0xff, 0x0b, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, - 0x00, 0x87, 0x17, 0x00, 0x00, 0x0c, 0x01, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0xff, - 0xff, 0xbf, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0xc0, 0x1e, 0x79, 0x00, 0x08, 0x43, 0x52, - 0x36, 0x34, 0x11, 0x33, 0x0a, 0x30, 0x8a, 0x2b, - 0x00, 0x00, 0x0c, 0x03, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x80, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, - 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x80, 0x00, 0x00, 0x00, 0x79, 0x00, 0x14, 0x41, - 0x0a, 0x5f, 0x43, 0x52, 0x53, 0x00, 0x8a, 0x43, - 0x52, 0x45, 0x53, 0x0a, 0x5c, 0x50, 0x53, 0x33, - 0x32, 0x8a, 0x43, 0x52, 0x45, 0x53, 0x0a, 0x60, - 0x50, 0x45, 0x33, 0x32, 0x8a, 0x43, 0x52, 0x45, - 0x53, 0x0a, 0x68, 0x50, 0x4c, 0x33, 0x32, 0x70, - 0x50, 0x30, 0x53, 0x5f, 0x50, 0x53, 0x33, 0x32, - 0x70, 0x50, 0x30, 0x45, 0x5f, 0x50, 0x45, 0x33, - 0x32, 0x70, 0x72, 0x74, 0x50, 0x30, 0x45, 0x5f, - 0x50, 0x30, 0x53, 0x5f, 0x00, 0x01, 0x00, 0x50, - 0x4c, 0x33, 0x32, 0xa0, 0x0c, 0x93, 0x50, 0x31, - 0x56, 0x5f, 0x00, 0xa4, 0x43, 0x52, 0x45, 0x53, - 0x8f, 0x43, 0x52, 0x36, 0x34, 0x0a, 0x0e, 0x50, - 0x53, 0x36, 0x34, 0x8f, 0x43, 0x52, 0x36, 0x34, - 0x0a, 0x16, 0x50, 0x45, 0x36, 0x34, 0x8f, 0x43, - 0x52, 0x36, 0x34, 0x0a, 0x26, 0x50, 0x4c, 0x36, - 0x34, 0x70, 0x50, 0x31, 0x53, 0x5f, 0x50, 0x53, - 0x36, 0x34, 0x70, 0x50, 0x31, 0x45, 0x5f, 0x50, - 0x45, 0x36, 0x34, 0x70, 0x50, 0x31, 0x4c, 0x5f, - 0x50, 0x4c, 0x36, 0x34, 0x84, 0x43, 0x52, 0x45, - 0x53, 0x43, 0x52, 0x36, 0x34, 0x60, 0xa4, 0x60, - 0x10, 0x4d, 0x08, 0x5f, 0x53, 0x42, 0x5f, 0x5b, - 0x82, 0x45, 0x08, 0x48, 0x50, 0x45, 0x54, 0x08, - 0x5f, 0x48, 0x49, 0x44, 0x0c, 0x41, 0xd0, 0x01, - 0x03, 0x08, 0x5f, 0x55, 0x49, 0x44, 0x00, 0x5b, - 0x80, 0x48, 0x50, 0x54, 0x4d, 0x00, 0x0c, 0x00, - 0x00, 0xd0, 0xfe, 0x0b, 0x00, 0x04, 0x5b, 0x81, - 0x10, 0x48, 0x50, 0x54, 0x4d, 0x13, 0x56, 0x45, - 0x4e, 0x44, 0x20, 0x50, 0x52, 0x44, 0x5f, 0x20, - 0x14, 0x36, 0x5f, 0x53, 0x54, 0x41, 0x00, 0x70, - 0x56, 0x45, 0x4e, 0x44, 0x60, 0x70, 0x50, 0x52, - 0x44, 0x5f, 0x61, 0x7a, 0x60, 0x0a, 0x10, 0x60, - 0xa0, 0x0c, 0x91, 0x93, 0x60, 0x00, 0x93, 0x60, - 0x0b, 0xff, 0xff, 0xa4, 0x00, 0xa0, 0x0e, 0x91, - 0x93, 0x61, 0x00, 0x94, 0x61, 0x0c, 0x00, 0xe1, - 0xf5, 0x05, 0xa4, 0x00, 0xa4, 0x0a, 0x0f, 0x08, - 0x5f, 0x43, 0x52, 0x53, 0x11, 0x11, 0x0a, 0x0e, - 0x86, 0x09, 0x00, 0x00, 0x00, 0x00, 0xd0, 0xfe, - 0x00, 0x04, 0x00, 0x00, 0x79, 0x00, 0x10, 0x40, - 0x06, 0x2e, 0x5f, 0x53, 0x42, 0x5f, 0x50, 0x43, - 0x49, 0x30, 0x5b, 0x82, 0x43, 0x05, 0x56, 0x47, - 0x41, 0x5f, 0x08, 0x5f, 0x41, 0x44, 0x52, 0x0c, - 0x00, 0x00, 0x02, 0x00, 0x5b, 0x80, 0x50, 0x43, - 0x49, 0x43, 0x02, 0x00, 0x0a, 0x04, 0x5b, 0x81, - 0x0b, 0x50, 0x43, 0x49, 0x43, 0x03, 0x56, 0x45, - 0x4e, 0x44, 0x20, 0x14, 0x08, 0x5f, 0x53, 0x31, - 0x44, 0x00, 0xa4, 0x00, 0x14, 0x08, 0x5f, 0x53, - 0x32, 0x44, 0x00, 0xa4, 0x00, 0x14, 0x19, 0x5f, - 0x53, 0x33, 0x44, 0x00, 0xa0, 0x0e, 0x93, 0x56, - 0x45, 0x4e, 0x44, 0x0c, 0x36, 0x1b, 0x00, 0x01, - 0xa4, 0x0a, 0x03, 0xa1, 0x03, 0xa4, 0x00, 0x10, - 0x25, 0x2e, 0x5f, 0x53, 0x42, 0x5f, 0x50, 0x43, - 0x49, 0x30, 0x5b, 0x82, 0x19, 0x50, 0x58, 0x31, - 0x33, 0x08, 0x5f, 0x41, 0x44, 0x52, 0x0c, 0x03, - 0x00, 0x01, 0x00, 0x5b, 0x80, 0x50, 0x31, 0x33, - 0x43, 0x02, 0x00, 0x0a, 0xff, 0x10, 0x46, 0x05, - 0x2e, 0x5f, 0x53, 0x42, 0x5f, 0x50, 0x43, 0x49, - 0x30, 0x5b, 0x82, 0x49, 0x04, 0x49, 0x53, 0x41, - 0x5f, 0x08, 0x5f, 0x41, 0x44, 0x52, 0x0c, 0x00, - 0x00, 0x01, 0x00, 0x5b, 0x80, 0x50, 0x34, 0x30, - 0x43, 0x02, 0x0a, 0x60, 0x0a, 0x04, 0x5b, 0x81, - 0x26, 0x5e, 0x2e, 0x50, 0x58, 0x31, 0x33, 0x50, - 0x31, 0x33, 0x43, 0x00, 0x00, 0x48, 0x2f, 0x00, - 0x07, 0x4c, 0x50, 0x45, 0x4e, 0x01, 0x00, 0x38, - 0x00, 0x03, 0x43, 0x41, 0x45, 0x4e, 0x01, 0x00, - 0x03, 0x43, 0x42, 0x45, 0x4e, 0x01, 0x08, 0x46, - 0x44, 0x45, 0x4e, 0x01, 0x10, 0x4c, 0x1b, 0x2f, - 0x03, 0x5f, 0x53, 0x42, 0x5f, 0x50, 0x43, 0x49, - 0x30, 0x49, 0x53, 0x41, 0x5f, 0x5b, 0x82, 0x2d, - 0x52, 0x54, 0x43, 0x5f, 0x08, 0x5f, 0x48, 0x49, - 0x44, 0x0c, 0x41, 0xd0, 0x0b, 0x00, 0x08, 0x5f, - 0x43, 0x52, 0x53, 0x11, 0x18, 0x0a, 0x15, 0x47, - 0x01, 0x70, 0x00, 0x70, 0x00, 0x10, 0x02, 0x22, - 0x00, 0x01, 0x47, 0x01, 0x72, 0x00, 0x72, 0x00, - 0x02, 0x06, 0x79, 0x00, 0x5b, 0x82, 0x37, 0x4b, - 0x42, 0x44, 0x5f, 0x08, 0x5f, 0x48, 0x49, 0x44, - 0x0c, 0x41, 0xd0, 0x03, 0x03, 0x14, 0x09, 0x5f, - 0x53, 0x54, 0x41, 0x00, 0xa4, 0x0a, 0x0f, 0x08, - 0x5f, 0x43, 0x52, 0x53, 0x11, 0x18, 0x0a, 0x15, - 0x47, 0x01, 0x60, 0x00, 0x60, 0x00, 0x01, 0x01, - 0x47, 0x01, 0x64, 0x00, 0x64, 0x00, 0x01, 0x01, - 0x22, 0x02, 0x00, 0x79, 0x00, 0x5b, 0x82, 0x27, - 0x4d, 0x4f, 0x55, 0x5f, 0x08, 0x5f, 0x48, 0x49, - 0x44, 0x0c, 0x41, 0xd0, 0x0f, 0x13, 0x14, 0x09, - 0x5f, 0x53, 0x54, 0x41, 0x00, 0xa4, 0x0a, 0x0f, - 0x08, 0x5f, 0x43, 0x52, 0x53, 0x11, 0x08, 0x0a, - 0x05, 0x22, 0x00, 0x10, 0x79, 0x00, 0x5b, 0x82, - 0x4a, 0x04, 0x46, 0x44, 0x43, 0x30, 0x08, 0x5f, - 0x48, 0x49, 0x44, 0x0c, 0x41, 0xd0, 0x07, 0x00, - 0x14, 0x18, 0x5f, 0x53, 0x54, 0x41, 0x00, 0x70, - 0x46, 0x44, 0x45, 0x4e, 0x60, 0xa0, 0x06, 0x93, - 0x60, 0x00, 0xa4, 0x00, 0xa1, 0x04, 0xa4, 0x0a, - 0x0f, 0x08, 0x5f, 0x43, 0x52, 0x53, 0x11, 0x1b, - 0x0a, 0x18, 0x47, 0x01, 0xf2, 0x03, 0xf2, 0x03, - 0x00, 0x04, 0x47, 0x01, 0xf7, 0x03, 0xf7, 0x03, - 0x00, 0x01, 0x22, 0x40, 0x00, 0x2a, 0x04, 0x00, - 0x79, 0x00, 0x5b, 0x82, 0x3e, 0x4c, 0x50, 0x54, - 0x5f, 0x08, 0x5f, 0x48, 0x49, 0x44, 0x0c, 0x41, - 0xd0, 0x04, 0x00, 0x14, 0x18, 0x5f, 0x53, 0x54, - 0x41, 0x00, 0x70, 0x4c, 0x50, 0x45, 0x4e, 0x60, - 0xa0, 0x06, 0x93, 0x60, 0x00, 0xa4, 0x00, 0xa1, - 0x04, 0xa4, 0x0a, 0x0f, 0x08, 0x5f, 0x43, 0x52, - 0x53, 0x11, 0x10, 0x0a, 0x0d, 0x47, 0x01, 0x78, - 0x03, 0x78, 0x03, 0x08, 0x08, 0x22, 0x80, 0x00, - 0x79, 0x00, 0x5b, 0x82, 0x45, 0x04, 0x43, 0x4f, - 0x4d, 0x31, 0x08, 0x5f, 0x48, 0x49, 0x44, 0x0c, - 0x41, 0xd0, 0x05, 0x01, 0x08, 0x5f, 0x55, 0x49, - 0x44, 0x01, 0x14, 0x18, 0x5f, 0x53, 0x54, 0x41, - 0x00, 0x70, 0x43, 0x41, 0x45, 0x4e, 0x60, 0xa0, - 0x06, 0x93, 0x60, 0x00, 0xa4, 0x00, 0xa1, 0x04, - 0xa4, 0x0a, 0x0f, 0x08, 0x5f, 0x43, 0x52, 0x53, - 0x11, 0x10, 0x0a, 0x0d, 0x47, 0x01, 0xf8, 0x03, - 0xf8, 0x03, 0x00, 0x08, 0x22, 0x10, 0x00, 0x79, - 0x00, 0x5b, 0x82, 0x46, 0x04, 0x43, 0x4f, 0x4d, - 0x32, 0x08, 0x5f, 0x48, 0x49, 0x44, 0x0c, 0x41, - 0xd0, 0x05, 0x01, 0x08, 0x5f, 0x55, 0x49, 0x44, - 0x0a, 0x02, 0x14, 0x18, 0x5f, 0x53, 0x54, 0x41, - 0x00, 0x70, 0x43, 0x42, 0x45, 0x4e, 0x60, 0xa0, - 0x06, 0x93, 0x60, 0x00, 0xa4, 0x00, 0xa1, 0x04, - 0xa4, 0x0a, 0x0f, 0x08, 0x5f, 0x43, 0x52, 0x53, - 0x11, 0x10, 0x0a, 0x0d, 0x47, 0x01, 0xf8, 0x02, - 0xf8, 0x02, 0x00, 0x08, 0x22, 0x08, 0x00, 0x79, - 0x00, 0x10, 0x49, 0x08, 0x2e, 0x5f, 0x53, 0x42, - 0x5f, 0x50, 0x43, 0x49, 0x30, 0x5b, 0x80, 0x50, - 0x43, 0x53, 0x54, 0x01, 0x0b, 0x00, 0xae, 0x0a, - 0x08, 0x5b, 0x81, 0x10, 0x50, 0x43, 0x53, 0x54, - 0x43, 0x50, 0x43, 0x49, 0x55, 0x20, 0x50, 0x43, - 0x49, 0x44, 0x20, 0x5b, 0x80, 0x53, 0x45, 0x4a, - 0x5f, 0x01, 0x0b, 0x08, 0xae, 0x0a, 0x04, 0x5b, - 0x81, 0x0b, 0x53, 0x45, 0x4a, 0x5f, 0x43, 0x42, - 0x30, 0x45, 0x4a, 0x20, 0x14, 0x0f, 0x50, 0x43, - 0x45, 0x4a, 0x01, 0x70, 0x79, 0x01, 0x68, 0x00, - 0x42, 0x30, 0x45, 0x4a, 0x14, 0x36, 0x50, 0x43, - 0x4e, 0x46, 0x00, 0x70, 0x00, 0x60, 0xa2, 0x2c, - 0x95, 0x60, 0x0a, 0x1f, 0x75, 0x60, 0xa0, 0x11, - 0x7b, 0x50, 0x43, 0x49, 0x55, 0x79, 0x01, 0x60, - 0x00, 0x00, 0x50, 0x43, 0x4e, 0x54, 0x60, 0x01, - 0xa0, 0x12, 0x7b, 0x50, 0x43, 0x49, 0x44, 0x79, - 0x01, 0x60, 0x00, 0x00, 0x50, 0x43, 0x4e, 0x54, - 0x60, 0x0a, 0x03, 0x10, 0x4a, 0xa0, 0x5f, 0x53, - 0x42, 0x5f, 0x10, 0x47, 0x74, 0x50, 0x43, 0x49, - 0x30, 0x08, 0x5f, 0x50, 0x52, 0x54, 0x12, 0x4b, - 0x73, 0x80, 0x12, 0x0b, 0x04, 0x0b, 0xff, 0xff, - 0x00, 0x4c, 0x4e, 0x4b, 0x44, 0x00, 0x12, 0x0b, - 0x04, 0x0b, 0xff, 0xff, 0x01, 0x4c, 0x4e, 0x4b, - 0x41, 0x00, 0x12, 0x0c, 0x04, 0x0b, 0xff, 0xff, - 0x0a, 0x02, 0x4c, 0x4e, 0x4b, 0x42, 0x00, 0x12, - 0x0c, 0x04, 0x0b, 0xff, 0xff, 0x0a, 0x03, 0x4c, - 0x4e, 0x4b, 0x43, 0x00, 0x12, 0x0d, 0x04, 0x0c, - 0xff, 0xff, 0x01, 0x00, 0x00, 0x4c, 0x4e, 0x4b, - 0x53, 0x00, 0x12, 0x0d, 0x04, 0x0c, 0xff, 0xff, - 0x01, 0x00, 0x01, 0x4c, 0x4e, 0x4b, 0x42, 0x00, - 0x12, 0x0e, 0x04, 0x0c, 0xff, 0xff, 0x01, 0x00, - 0x0a, 0x02, 0x4c, 0x4e, 0x4b, 0x43, 0x00, 0x12, - 0x0e, 0x04, 0x0c, 0xff, 0xff, 0x01, 0x00, 0x0a, - 0x03, 0x4c, 0x4e, 0x4b, 0x44, 0x00, 0x12, 0x0d, - 0x04, 0x0c, 0xff, 0xff, 0x02, 0x00, 0x00, 0x4c, - 0x4e, 0x4b, 0x42, 0x00, 0x12, 0x0d, 0x04, 0x0c, - 0xff, 0xff, 0x02, 0x00, 0x01, 0x4c, 0x4e, 0x4b, - 0x43, 0x00, 0x12, 0x0e, 0x04, 0x0c, 0xff, 0xff, - 0x02, 0x00, 0x0a, 0x02, 0x4c, 0x4e, 0x4b, 0x44, - 0x00, 0x12, 0x0e, 0x04, 0x0c, 0xff, 0xff, 0x02, - 0x00, 0x0a, 0x03, 0x4c, 0x4e, 0x4b, 0x41, 0x00, - 0x12, 0x0d, 0x04, 0x0c, 0xff, 0xff, 0x03, 0x00, - 0x00, 0x4c, 0x4e, 0x4b, 0x43, 0x00, 0x12, 0x0d, - 0x04, 0x0c, 0xff, 0xff, 0x03, 0x00, 0x01, 0x4c, - 0x4e, 0x4b, 0x44, 0x00, 0x12, 0x0e, 0x04, 0x0c, - 0xff, 0xff, 0x03, 0x00, 0x0a, 0x02, 0x4c, 0x4e, - 0x4b, 0x41, 0x00, 0x12, 0x0e, 0x04, 0x0c, 0xff, - 0xff, 0x03, 0x00, 0x0a, 0x03, 0x4c, 0x4e, 0x4b, - 0x42, 0x00, 0x12, 0x0d, 0x04, 0x0c, 0xff, 0xff, - 0x04, 0x00, 0x00, 0x4c, 0x4e, 0x4b, 0x44, 0x00, - 0x12, 0x0d, 0x04, 0x0c, 0xff, 0xff, 0x04, 0x00, - 0x01, 0x4c, 0x4e, 0x4b, 0x41, 0x00, 0x12, 0x0e, - 0x04, 0x0c, 0xff, 0xff, 0x04, 0x00, 0x0a, 0x02, - 0x4c, 0x4e, 0x4b, 0x42, 0x00, 0x12, 0x0e, 0x04, - 0x0c, 0xff, 0xff, 0x04, 0x00, 0x0a, 0x03, 0x4c, - 0x4e, 0x4b, 0x43, 0x00, 0x12, 0x0d, 0x04, 0x0c, - 0xff, 0xff, 0x05, 0x00, 0x00, 0x4c, 0x4e, 0x4b, - 0x41, 0x00, 0x12, 0x0d, 0x04, 0x0c, 0xff, 0xff, - 0x05, 0x00, 0x01, 0x4c, 0x4e, 0x4b, 0x42, 0x00, - 0x12, 0x0e, 0x04, 0x0c, 0xff, 0xff, 0x05, 0x00, - 0x0a, 0x02, 0x4c, 0x4e, 0x4b, 0x43, 0x00, 0x12, - 0x0e, 0x04, 0x0c, 0xff, 0xff, 0x05, 0x00, 0x0a, - 0x03, 0x4c, 0x4e, 0x4b, 0x44, 0x00, 0x12, 0x0d, - 0x04, 0x0c, 0xff, 0xff, 0x06, 0x00, 0x00, 0x4c, - 0x4e, 0x4b, 0x42, 0x00, 0x12, 0x0d, 0x04, 0x0c, - 0xff, 0xff, 0x06, 0x00, 0x01, 0x4c, 0x4e, 0x4b, - 0x43, 0x00, 0x12, 0x0e, 0x04, 0x0c, 0xff, 0xff, - 0x06, 0x00, 0x0a, 0x02, 0x4c, 0x4e, 0x4b, 0x44, - 0x00, 0x12, 0x0e, 0x04, 0x0c, 0xff, 0xff, 0x06, - 0x00, 0x0a, 0x03, 0x4c, 0x4e, 0x4b, 0x41, 0x00, - 0x12, 0x0d, 0x04, 0x0c, 0xff, 0xff, 0x07, 0x00, - 0x00, 0x4c, 0x4e, 0x4b, 0x43, 0x00, 0x12, 0x0d, - 0x04, 0x0c, 0xff, 0xff, 0x07, 0x00, 0x01, 0x4c, - 0x4e, 0x4b, 0x44, 0x00, 0x12, 0x0e, 0x04, 0x0c, - 0xff, 0xff, 0x07, 0x00, 0x0a, 0x02, 0x4c, 0x4e, - 0x4b, 0x41, 0x00, 0x12, 0x0e, 0x04, 0x0c, 0xff, - 0xff, 0x07, 0x00, 0x0a, 0x03, 0x4c, 0x4e, 0x4b, - 0x42, 0x00, 0x12, 0x0d, 0x04, 0x0c, 0xff, 0xff, - 0x08, 0x00, 0x00, 0x4c, 0x4e, 0x4b, 0x44, 0x00, - 0x12, 0x0d, 0x04, 0x0c, 0xff, 0xff, 0x08, 0x00, - 0x01, 0x4c, 0x4e, 0x4b, 0x41, 0x00, 0x12, 0x0e, - 0x04, 0x0c, 0xff, 0xff, 0x08, 0x00, 0x0a, 0x02, - 0x4c, 0x4e, 0x4b, 0x42, 0x00, 0x12, 0x0e, 0x04, - 0x0c, 0xff, 0xff, 0x08, 0x00, 0x0a, 0x03, 0x4c, - 0x4e, 0x4b, 0x43, 0x00, 0x12, 0x0d, 0x04, 0x0c, - 0xff, 0xff, 0x09, 0x00, 0x00, 0x4c, 0x4e, 0x4b, - 0x41, 0x00, 0x12, 0x0d, 0x04, 0x0c, 0xff, 0xff, - 0x09, 0x00, 0x01, 0x4c, 0x4e, 0x4b, 0x42, 0x00, - 0x12, 0x0e, 0x04, 0x0c, 0xff, 0xff, 0x09, 0x00, - 0x0a, 0x02, 0x4c, 0x4e, 0x4b, 0x43, 0x00, 0x12, - 0x0e, 0x04, 0x0c, 0xff, 0xff, 0x09, 0x00, 0x0a, - 0x03, 0x4c, 0x4e, 0x4b, 0x44, 0x00, 0x12, 0x0d, - 0x04, 0x0c, 0xff, 0xff, 0x0a, 0x00, 0x00, 0x4c, - 0x4e, 0x4b, 0x42, 0x00, 0x12, 0x0d, 0x04, 0x0c, - 0xff, 0xff, 0x0a, 0x00, 0x01, 0x4c, 0x4e, 0x4b, - 0x43, 0x00, 0x12, 0x0e, 0x04, 0x0c, 0xff, 0xff, - 0x0a, 0x00, 0x0a, 0x02, 0x4c, 0x4e, 0x4b, 0x44, - 0x00, 0x12, 0x0e, 0x04, 0x0c, 0xff, 0xff, 0x0a, - 0x00, 0x0a, 0x03, 0x4c, 0x4e, 0x4b, 0x41, 0x00, - 0x12, 0x0d, 0x04, 0x0c, 0xff, 0xff, 0x0b, 0x00, - 0x00, 0x4c, 0x4e, 0x4b, 0x43, 0x00, 0x12, 0x0d, - 0x04, 0x0c, 0xff, 0xff, 0x0b, 0x00, 0x01, 0x4c, - 0x4e, 0x4b, 0x44, 0x00, 0x12, 0x0e, 0x04, 0x0c, - 0xff, 0xff, 0x0b, 0x00, 0x0a, 0x02, 0x4c, 0x4e, - 0x4b, 0x41, 0x00, 0x12, 0x0e, 0x04, 0x0c, 0xff, - 0xff, 0x0b, 0x00, 0x0a, 0x03, 0x4c, 0x4e, 0x4b, - 0x42, 0x00, 0x12, 0x0d, 0x04, 0x0c, 0xff, 0xff, - 0x0c, 0x00, 0x00, 0x4c, 0x4e, 0x4b, 0x44, 0x00, - 0x12, 0x0d, 0x04, 0x0c, 0xff, 0xff, 0x0c, 0x00, - 0x01, 0x4c, 0x4e, 0x4b, 0x41, 0x00, 0x12, 0x0e, - 0x04, 0x0c, 0xff, 0xff, 0x0c, 0x00, 0x0a, 0x02, - 0x4c, 0x4e, 0x4b, 0x42, 0x00, 0x12, 0x0e, 0x04, - 0x0c, 0xff, 0xff, 0x0c, 0x00, 0x0a, 0x03, 0x4c, - 0x4e, 0x4b, 0x43, 0x00, 0x12, 0x0d, 0x04, 0x0c, - 0xff, 0xff, 0x0d, 0x00, 0x00, 0x4c, 0x4e, 0x4b, - 0x41, 0x00, 0x12, 0x0d, 0x04, 0x0c, 0xff, 0xff, - 0x0d, 0x00, 0x01, 0x4c, 0x4e, 0x4b, 0x42, 0x00, - 0x12, 0x0e, 0x04, 0x0c, 0xff, 0xff, 0x0d, 0x00, - 0x0a, 0x02, 0x4c, 0x4e, 0x4b, 0x43, 0x00, 0x12, - 0x0e, 0x04, 0x0c, 0xff, 0xff, 0x0d, 0x00, 0x0a, - 0x03, 0x4c, 0x4e, 0x4b, 0x44, 0x00, 0x12, 0x0d, - 0x04, 0x0c, 0xff, 0xff, 0x0e, 0x00, 0x00, 0x4c, - 0x4e, 0x4b, 0x42, 0x00, 0x12, 0x0d, 0x04, 0x0c, - 0xff, 0xff, 0x0e, 0x00, 0x01, 0x4c, 0x4e, 0x4b, - 0x43, 0x00, 0x12, 0x0e, 0x04, 0x0c, 0xff, 0xff, - 0x0e, 0x00, 0x0a, 0x02, 0x4c, 0x4e, 0x4b, 0x44, - 0x00, 0x12, 0x0e, 0x04, 0x0c, 0xff, 0xff, 0x0e, - 0x00, 0x0a, 0x03, 0x4c, 0x4e, 0x4b, 0x41, 0x00, - 0x12, 0x0d, 0x04, 0x0c, 0xff, 0xff, 0x0f, 0x00, - 0x00, 0x4c, 0x4e, 0x4b, 0x43, 0x00, 0x12, 0x0d, - 0x04, 0x0c, 0xff, 0xff, 0x0f, 0x00, 0x01, 0x4c, - 0x4e, 0x4b, 0x44, 0x00, 0x12, 0x0e, 0x04, 0x0c, - 0xff, 0xff, 0x0f, 0x00, 0x0a, 0x02, 0x4c, 0x4e, - 0x4b, 0x41, 0x00, 0x12, 0x0e, 0x04, 0x0c, 0xff, - 0xff, 0x0f, 0x00, 0x0a, 0x03, 0x4c, 0x4e, 0x4b, - 0x42, 0x00, 0x12, 0x0d, 0x04, 0x0c, 0xff, 0xff, - 0x10, 0x00, 0x00, 0x4c, 0x4e, 0x4b, 0x44, 0x00, - 0x12, 0x0d, 0x04, 0x0c, 0xff, 0xff, 0x10, 0x00, - 0x01, 0x4c, 0x4e, 0x4b, 0x41, 0x00, 0x12, 0x0e, - 0x04, 0x0c, 0xff, 0xff, 0x10, 0x00, 0x0a, 0x02, - 0x4c, 0x4e, 0x4b, 0x42, 0x00, 0x12, 0x0e, 0x04, - 0x0c, 0xff, 0xff, 0x10, 0x00, 0x0a, 0x03, 0x4c, - 0x4e, 0x4b, 0x43, 0x00, 0x12, 0x0d, 0x04, 0x0c, - 0xff, 0xff, 0x11, 0x00, 0x00, 0x4c, 0x4e, 0x4b, - 0x41, 0x00, 0x12, 0x0d, 0x04, 0x0c, 0xff, 0xff, - 0x11, 0x00, 0x01, 0x4c, 0x4e, 0x4b, 0x42, 0x00, - 0x12, 0x0e, 0x04, 0x0c, 0xff, 0xff, 0x11, 0x00, - 0x0a, 0x02, 0x4c, 0x4e, 0x4b, 0x43, 0x00, 0x12, - 0x0e, 0x04, 0x0c, 0xff, 0xff, 0x11, 0x00, 0x0a, - 0x03, 0x4c, 0x4e, 0x4b, 0x44, 0x00, 0x12, 0x0d, - 0x04, 0x0c, 0xff, 0xff, 0x12, 0x00, 0x00, 0x4c, - 0x4e, 0x4b, 0x42, 0x00, 0x12, 0x0d, 0x04, 0x0c, - 0xff, 0xff, 0x12, 0x00, 0x01, 0x4c, 0x4e, 0x4b, - 0x43, 0x00, 0x12, 0x0e, 0x04, 0x0c, 0xff, 0xff, - 0x12, 0x00, 0x0a, 0x02, 0x4c, 0x4e, 0x4b, 0x44, - 0x00, 0x12, 0x0e, 0x04, 0x0c, 0xff, 0xff, 0x12, - 0x00, 0x0a, 0x03, 0x4c, 0x4e, 0x4b, 0x41, 0x00, - 0x12, 0x0d, 0x04, 0x0c, 0xff, 0xff, 0x13, 0x00, - 0x00, 0x4c, 0x4e, 0x4b, 0x43, 0x00, 0x12, 0x0d, - 0x04, 0x0c, 0xff, 0xff, 0x13, 0x00, 0x01, 0x4c, - 0x4e, 0x4b, 0x44, 0x00, 0x12, 0x0e, 0x04, 0x0c, - 0xff, 0xff, 0x13, 0x00, 0x0a, 0x02, 0x4c, 0x4e, - 0x4b, 0x41, 0x00, 0x12, 0x0e, 0x04, 0x0c, 0xff, - 0xff, 0x13, 0x00, 0x0a, 0x03, 0x4c, 0x4e, 0x4b, - 0x42, 0x00, 0x12, 0x0d, 0x04, 0x0c, 0xff, 0xff, - 0x14, 0x00, 0x00, 0x4c, 0x4e, 0x4b, 0x44, 0x00, - 0x12, 0x0d, 0x04, 0x0c, 0xff, 0xff, 0x14, 0x00, - 0x01, 0x4c, 0x4e, 0x4b, 0x41, 0x00, 0x12, 0x0e, - 0x04, 0x0c, 0xff, 0xff, 0x14, 0x00, 0x0a, 0x02, - 0x4c, 0x4e, 0x4b, 0x42, 0x00, 0x12, 0x0e, 0x04, - 0x0c, 0xff, 0xff, 0x14, 0x00, 0x0a, 0x03, 0x4c, - 0x4e, 0x4b, 0x43, 0x00, 0x12, 0x0d, 0x04, 0x0c, - 0xff, 0xff, 0x15, 0x00, 0x00, 0x4c, 0x4e, 0x4b, - 0x41, 0x00, 0x12, 0x0d, 0x04, 0x0c, 0xff, 0xff, - 0x15, 0x00, 0x01, 0x4c, 0x4e, 0x4b, 0x42, 0x00, - 0x12, 0x0e, 0x04, 0x0c, 0xff, 0xff, 0x15, 0x00, - 0x0a, 0x02, 0x4c, 0x4e, 0x4b, 0x43, 0x00, 0x12, - 0x0e, 0x04, 0x0c, 0xff, 0xff, 0x15, 0x00, 0x0a, - 0x03, 0x4c, 0x4e, 0x4b, 0x44, 0x00, 0x12, 0x0d, - 0x04, 0x0c, 0xff, 0xff, 0x16, 0x00, 0x00, 0x4c, - 0x4e, 0x4b, 0x42, 0x00, 0x12, 0x0d, 0x04, 0x0c, - 0xff, 0xff, 0x16, 0x00, 0x01, 0x4c, 0x4e, 0x4b, - 0x43, 0x00, 0x12, 0x0e, 0x04, 0x0c, 0xff, 0xff, - 0x16, 0x00, 0x0a, 0x02, 0x4c, 0x4e, 0x4b, 0x44, - 0x00, 0x12, 0x0e, 0x04, 0x0c, 0xff, 0xff, 0x16, - 0x00, 0x0a, 0x03, 0x4c, 0x4e, 0x4b, 0x41, 0x00, - 0x12, 0x0d, 0x04, 0x0c, 0xff, 0xff, 0x17, 0x00, - 0x00, 0x4c, 0x4e, 0x4b, 0x43, 0x00, 0x12, 0x0d, - 0x04, 0x0c, 0xff, 0xff, 0x17, 0x00, 0x01, 0x4c, - 0x4e, 0x4b, 0x44, 0x00, 0x12, 0x0e, 0x04, 0x0c, - 0xff, 0xff, 0x17, 0x00, 0x0a, 0x02, 0x4c, 0x4e, - 0x4b, 0x41, 0x00, 0x12, 0x0e, 0x04, 0x0c, 0xff, - 0xff, 0x17, 0x00, 0x0a, 0x03, 0x4c, 0x4e, 0x4b, - 0x42, 0x00, 0x12, 0x0d, 0x04, 0x0c, 0xff, 0xff, - 0x18, 0x00, 0x00, 0x4c, 0x4e, 0x4b, 0x44, 0x00, - 0x12, 0x0d, 0x04, 0x0c, 0xff, 0xff, 0x18, 0x00, - 0x01, 0x4c, 0x4e, 0x4b, 0x41, 0x00, 0x12, 0x0e, - 0x04, 0x0c, 0xff, 0xff, 0x18, 0x00, 0x0a, 0x02, - 0x4c, 0x4e, 0x4b, 0x42, 0x00, 0x12, 0x0e, 0x04, - 0x0c, 0xff, 0xff, 0x18, 0x00, 0x0a, 0x03, 0x4c, - 0x4e, 0x4b, 0x43, 0x00, 0x12, 0x0d, 0x04, 0x0c, - 0xff, 0xff, 0x19, 0x00, 0x00, 0x4c, 0x4e, 0x4b, - 0x41, 0x00, 0x12, 0x0d, 0x04, 0x0c, 0xff, 0xff, - 0x19, 0x00, 0x01, 0x4c, 0x4e, 0x4b, 0x42, 0x00, - 0x12, 0x0e, 0x04, 0x0c, 0xff, 0xff, 0x19, 0x00, - 0x0a, 0x02, 0x4c, 0x4e, 0x4b, 0x43, 0x00, 0x12, - 0x0e, 0x04, 0x0c, 0xff, 0xff, 0x19, 0x00, 0x0a, - 0x03, 0x4c, 0x4e, 0x4b, 0x44, 0x00, 0x12, 0x0d, - 0x04, 0x0c, 0xff, 0xff, 0x1a, 0x00, 0x00, 0x4c, - 0x4e, 0x4b, 0x42, 0x00, 0x12, 0x0d, 0x04, 0x0c, - 0xff, 0xff, 0x1a, 0x00, 0x01, 0x4c, 0x4e, 0x4b, - 0x43, 0x00, 0x12, 0x0e, 0x04, 0x0c, 0xff, 0xff, - 0x1a, 0x00, 0x0a, 0x02, 0x4c, 0x4e, 0x4b, 0x44, - 0x00, 0x12, 0x0e, 0x04, 0x0c, 0xff, 0xff, 0x1a, - 0x00, 0x0a, 0x03, 0x4c, 0x4e, 0x4b, 0x41, 0x00, - 0x12, 0x0d, 0x04, 0x0c, 0xff, 0xff, 0x1b, 0x00, - 0x00, 0x4c, 0x4e, 0x4b, 0x43, 0x00, 0x12, 0x0d, - 0x04, 0x0c, 0xff, 0xff, 0x1b, 0x00, 0x01, 0x4c, - 0x4e, 0x4b, 0x44, 0x00, 0x12, 0x0e, 0x04, 0x0c, - 0xff, 0xff, 0x1b, 0x00, 0x0a, 0x02, 0x4c, 0x4e, - 0x4b, 0x41, 0x00, 0x12, 0x0e, 0x04, 0x0c, 0xff, - 0xff, 0x1b, 0x00, 0x0a, 0x03, 0x4c, 0x4e, 0x4b, - 0x42, 0x00, 0x12, 0x0d, 0x04, 0x0c, 0xff, 0xff, - 0x1c, 0x00, 0x00, 0x4c, 0x4e, 0x4b, 0x44, 0x00, - 0x12, 0x0d, 0x04, 0x0c, 0xff, 0xff, 0x1c, 0x00, - 0x01, 0x4c, 0x4e, 0x4b, 0x41, 0x00, 0x12, 0x0e, - 0x04, 0x0c, 0xff, 0xff, 0x1c, 0x00, 0x0a, 0x02, - 0x4c, 0x4e, 0x4b, 0x42, 0x00, 0x12, 0x0e, 0x04, - 0x0c, 0xff, 0xff, 0x1c, 0x00, 0x0a, 0x03, 0x4c, - 0x4e, 0x4b, 0x43, 0x00, 0x12, 0x0d, 0x04, 0x0c, - 0xff, 0xff, 0x1d, 0x00, 0x00, 0x4c, 0x4e, 0x4b, - 0x41, 0x00, 0x12, 0x0d, 0x04, 0x0c, 0xff, 0xff, - 0x1d, 0x00, 0x01, 0x4c, 0x4e, 0x4b, 0x42, 0x00, - 0x12, 0x0e, 0x04, 0x0c, 0xff, 0xff, 0x1d, 0x00, - 0x0a, 0x02, 0x4c, 0x4e, 0x4b, 0x43, 0x00, 0x12, - 0x0e, 0x04, 0x0c, 0xff, 0xff, 0x1d, 0x00, 0x0a, - 0x03, 0x4c, 0x4e, 0x4b, 0x44, 0x00, 0x12, 0x0d, - 0x04, 0x0c, 0xff, 0xff, 0x1e, 0x00, 0x00, 0x4c, - 0x4e, 0x4b, 0x42, 0x00, 0x12, 0x0d, 0x04, 0x0c, - 0xff, 0xff, 0x1e, 0x00, 0x01, 0x4c, 0x4e, 0x4b, - 0x43, 0x00, 0x12, 0x0e, 0x04, 0x0c, 0xff, 0xff, - 0x1e, 0x00, 0x0a, 0x02, 0x4c, 0x4e, 0x4b, 0x44, - 0x00, 0x12, 0x0e, 0x04, 0x0c, 0xff, 0xff, 0x1e, - 0x00, 0x0a, 0x03, 0x4c, 0x4e, 0x4b, 0x41, 0x00, - 0x12, 0x0d, 0x04, 0x0c, 0xff, 0xff, 0x1f, 0x00, - 0x00, 0x4c, 0x4e, 0x4b, 0x43, 0x00, 0x12, 0x0d, - 0x04, 0x0c, 0xff, 0xff, 0x1f, 0x00, 0x01, 0x4c, - 0x4e, 0x4b, 0x44, 0x00, 0x12, 0x0e, 0x04, 0x0c, - 0xff, 0xff, 0x1f, 0x00, 0x0a, 0x02, 0x4c, 0x4e, - 0x4b, 0x41, 0x00, 0x12, 0x0e, 0x04, 0x0c, 0xff, - 0xff, 0x1f, 0x00, 0x0a, 0x03, 0x4c, 0x4e, 0x4b, - 0x42, 0x00, 0x5b, 0x81, 0x24, 0x2f, 0x03, 0x50, - 0x43, 0x49, 0x30, 0x49, 0x53, 0x41, 0x5f, 0x50, - 0x34, 0x30, 0x43, 0x01, 0x50, 0x52, 0x51, 0x30, - 0x08, 0x50, 0x52, 0x51, 0x31, 0x08, 0x50, 0x52, - 0x51, 0x32, 0x08, 0x50, 0x52, 0x51, 0x33, 0x08, - 0x14, 0x13, 0x49, 0x51, 0x53, 0x54, 0x01, 0xa0, - 0x09, 0x7b, 0x0a, 0x80, 0x68, 0x00, 0xa4, 0x0a, - 0x09, 0xa4, 0x0a, 0x0b, 0x14, 0x36, 0x49, 0x51, - 0x43, 0x52, 0x09, 0x08, 0x50, 0x52, 0x52, 0x30, - 0x11, 0x0e, 0x0a, 0x0b, 0x89, 0x06, 0x00, 0x09, - 0x01, 0x00, 0x00, 0x00, 0x00, 0x79, 0x00, 0x8a, - 0x50, 0x52, 0x52, 0x30, 0x0a, 0x05, 0x50, 0x52, - 0x52, 0x49, 0xa0, 0x0b, 0x95, 0x68, 0x0a, 0x80, - 0x70, 0x68, 0x50, 0x52, 0x52, 0x49, 0xa4, 0x50, - 0x52, 0x52, 0x30, 0x5b, 0x82, 0x4c, 0x07, 0x4c, - 0x4e, 0x4b, 0x41, 0x08, 0x5f, 0x48, 0x49, 0x44, - 0x0c, 0x41, 0xd0, 0x0c, 0x0f, 0x08, 0x5f, 0x55, - 0x49, 0x44, 0x00, 0x08, 0x5f, 0x50, 0x52, 0x53, - 0x11, 0x16, 0x0a, 0x13, 0x89, 0x0e, 0x00, 0x09, - 0x03, 0x05, 0x00, 0x00, 0x00, 0x0a, 0x00, 0x00, - 0x00, 0x0b, 0x00, 0x00, 0x00, 0x79, 0x00, 0x14, - 0x0f, 0x5f, 0x53, 0x54, 0x41, 0x00, 0xa4, 0x49, - 0x51, 0x53, 0x54, 0x50, 0x52, 0x51, 0x30, 0x14, - 0x11, 0x5f, 0x44, 0x49, 0x53, 0x00, 0x7d, 0x50, - 0x52, 0x51, 0x30, 0x0a, 0x80, 0x50, 0x52, 0x51, - 0x30, 0x14, 0x0f, 0x5f, 0x43, 0x52, 0x53, 0x00, - 0xa4, 0x49, 0x51, 0x43, 0x52, 0x50, 0x52, 0x51, - 0x30, 0x14, 0x17, 0x5f, 0x53, 0x52, 0x53, 0x01, - 0x8a, 0x68, 0x0a, 0x05, 0x50, 0x52, 0x52, 0x49, - 0x70, 0x50, 0x52, 0x52, 0x49, 0x50, 0x52, 0x51, - 0x30, 0x5b, 0x82, 0x4c, 0x07, 0x4c, 0x4e, 0x4b, - 0x42, 0x08, 0x5f, 0x48, 0x49, 0x44, 0x0c, 0x41, - 0xd0, 0x0c, 0x0f, 0x08, 0x5f, 0x55, 0x49, 0x44, - 0x01, 0x08, 0x5f, 0x50, 0x52, 0x53, 0x11, 0x16, - 0x0a, 0x13, 0x89, 0x0e, 0x00, 0x09, 0x03, 0x05, - 0x00, 0x00, 0x00, 0x0a, 0x00, 0x00, 0x00, 0x0b, - 0x00, 0x00, 0x00, 0x79, 0x00, 0x14, 0x0f, 0x5f, - 0x53, 0x54, 0x41, 0x00, 0xa4, 0x49, 0x51, 0x53, - 0x54, 0x50, 0x52, 0x51, 0x31, 0x14, 0x11, 0x5f, - 0x44, 0x49, 0x53, 0x00, 0x7d, 0x50, 0x52, 0x51, - 0x31, 0x0a, 0x80, 0x50, 0x52, 0x51, 0x31, 0x14, - 0x0f, 0x5f, 0x43, 0x52, 0x53, 0x00, 0xa4, 0x49, - 0x51, 0x43, 0x52, 0x50, 0x52, 0x51, 0x31, 0x14, - 0x17, 0x5f, 0x53, 0x52, 0x53, 0x01, 0x8a, 0x68, - 0x0a, 0x05, 0x50, 0x52, 0x52, 0x49, 0x70, 0x50, - 0x52, 0x52, 0x49, 0x50, 0x52, 0x51, 0x31, 0x5b, - 0x82, 0x4d, 0x07, 0x4c, 0x4e, 0x4b, 0x43, 0x08, - 0x5f, 0x48, 0x49, 0x44, 0x0c, 0x41, 0xd0, 0x0c, - 0x0f, 0x08, 0x5f, 0x55, 0x49, 0x44, 0x0a, 0x02, - 0x08, 0x5f, 0x50, 0x52, 0x53, 0x11, 0x16, 0x0a, - 0x13, 0x89, 0x0e, 0x00, 0x09, 0x03, 0x05, 0x00, - 0x00, 0x00, 0x0a, 0x00, 0x00, 0x00, 0x0b, 0x00, - 0x00, 0x00, 0x79, 0x00, 0x14, 0x0f, 0x5f, 0x53, - 0x54, 0x41, 0x00, 0xa4, 0x49, 0x51, 0x53, 0x54, - 0x50, 0x52, 0x51, 0x32, 0x14, 0x11, 0x5f, 0x44, - 0x49, 0x53, 0x00, 0x7d, 0x50, 0x52, 0x51, 0x32, - 0x0a, 0x80, 0x50, 0x52, 0x51, 0x32, 0x14, 0x0f, - 0x5f, 0x43, 0x52, 0x53, 0x00, 0xa4, 0x49, 0x51, - 0x43, 0x52, 0x50, 0x52, 0x51, 0x32, 0x14, 0x17, - 0x5f, 0x53, 0x52, 0x53, 0x01, 0x8a, 0x68, 0x0a, - 0x05, 0x50, 0x52, 0x52, 0x49, 0x70, 0x50, 0x52, - 0x52, 0x49, 0x50, 0x52, 0x51, 0x32, 0x5b, 0x82, - 0x4d, 0x07, 0x4c, 0x4e, 0x4b, 0x44, 0x08, 0x5f, - 0x48, 0x49, 0x44, 0x0c, 0x41, 0xd0, 0x0c, 0x0f, - 0x08, 0x5f, 0x55, 0x49, 0x44, 0x0a, 0x03, 0x08, - 0x5f, 0x50, 0x52, 0x53, 0x11, 0x16, 0x0a, 0x13, - 0x89, 0x0e, 0x00, 0x09, 0x03, 0x05, 0x00, 0x00, - 0x00, 0x0a, 0x00, 0x00, 0x00, 0x0b, 0x00, 0x00, - 0x00, 0x79, 0x00, 0x14, 0x0f, 0x5f, 0x53, 0x54, - 0x41, 0x00, 0xa4, 0x49, 0x51, 0x53, 0x54, 0x50, - 0x52, 0x51, 0x33, 0x14, 0x11, 0x5f, 0x44, 0x49, - 0x53, 0x00, 0x7d, 0x50, 0x52, 0x51, 0x33, 0x0a, - 0x80, 0x50, 0x52, 0x51, 0x33, 0x14, 0x0f, 0x5f, - 0x43, 0x52, 0x53, 0x00, 0xa4, 0x49, 0x51, 0x43, - 0x52, 0x50, 0x52, 0x51, 0x33, 0x14, 0x17, 0x5f, - 0x53, 0x52, 0x53, 0x01, 0x8a, 0x68, 0x0a, 0x05, - 0x50, 0x52, 0x52, 0x49, 0x70, 0x50, 0x52, 0x52, - 0x49, 0x50, 0x52, 0x51, 0x33, 0x5b, 0x82, 0x4f, - 0x04, 0x4c, 0x4e, 0x4b, 0x53, 0x08, 0x5f, 0x48, - 0x49, 0x44, 0x0c, 0x41, 0xd0, 0x0c, 0x0f, 0x08, - 0x5f, 0x55, 0x49, 0x44, 0x0a, 0x04, 0x08, 0x5f, - 0x50, 0x52, 0x53, 0x11, 0x0e, 0x0a, 0x0b, 0x89, - 0x06, 0x00, 0x09, 0x01, 0x09, 0x00, 0x00, 0x00, - 0x79, 0x00, 0x14, 0x09, 0x5f, 0x53, 0x54, 0x41, - 0x00, 0xa4, 0x0a, 0x0b, 0x14, 0x06, 0x5f, 0x44, - 0x49, 0x53, 0x00, 0x14, 0x0b, 0x5f, 0x43, 0x52, - 0x53, 0x00, 0xa4, 0x5f, 0x50, 0x52, 0x53, 0x14, - 0x06, 0x5f, 0x53, 0x52, 0x53, 0x01, 0x10, 0x47, - 0x0e, 0x5f, 0x53, 0x42, 0x5f, 0x14, 0x35, 0x43, - 0x50, 0x4d, 0x41, 0x01, 0x70, 0x83, 0x88, 0x43, - 0x50, 0x4f, 0x4e, 0x68, 0x00, 0x60, 0x70, 0x11, - 0x0b, 0x0a, 0x08, 0x00, 0x08, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x61, 0x70, 0x68, 0x88, 0x61, - 0x0a, 0x02, 0x00, 0x70, 0x68, 0x88, 0x61, 0x0a, - 0x03, 0x00, 0x70, 0x60, 0x88, 0x61, 0x0a, 0x04, - 0x00, 0xa4, 0x61, 0x14, 0x1a, 0x43, 0x50, 0x53, - 0x54, 0x01, 0x70, 0x83, 0x88, 0x43, 0x50, 0x4f, - 0x4e, 0x68, 0x00, 0x60, 0xa0, 0x05, 0x60, 0xa4, - 0x0a, 0x0f, 0xa1, 0x03, 0xa4, 0x00, 0x14, 0x0a, - 0x43, 0x50, 0x45, 0x4a, 0x02, 0x5b, 0x22, 0x0a, - 0xc8, 0x5b, 0x80, 0x50, 0x52, 0x53, 0x54, 0x01, - 0x0b, 0x00, 0xaf, 0x0a, 0x20, 0x5b, 0x81, 0x0c, - 0x50, 0x52, 0x53, 0x54, 0x01, 0x50, 0x52, 0x53, - 0x5f, 0x40, 0x10, 0x14, 0x4a, 0x06, 0x50, 0x52, - 0x53, 0x43, 0x00, 0x70, 0x50, 0x52, 0x53, 0x5f, - 0x65, 0x70, 0x00, 0x62, 0x70, 0x00, 0x60, 0xa2, - 0x46, 0x05, 0x95, 0x60, 0x87, 0x43, 0x50, 0x4f, - 0x4e, 0x70, 0x83, 0x88, 0x43, 0x50, 0x4f, 0x4e, - 0x60, 0x00, 0x61, 0xa0, 0x0a, 0x7b, 0x60, 0x0a, - 0x07, 0x00, 0x7a, 0x62, 0x01, 0x62, 0xa1, 0x0c, - 0x70, 0x83, 0x88, 0x65, 0x7a, 0x60, 0x0a, 0x03, - 0x00, 0x00, 0x62, 0x70, 0x7b, 0x62, 0x01, 0x00, - 0x63, 0xa0, 0x22, 0x92, 0x93, 0x61, 0x63, 0x70, - 0x63, 0x88, 0x43, 0x50, 0x4f, 0x4e, 0x60, 0x00, - 0xa0, 0x0a, 0x93, 0x63, 0x01, 0x4e, 0x54, 0x46, - 0x59, 0x60, 0x01, 0xa1, 0x08, 0x4e, 0x54, 0x46, - 0x59, 0x60, 0x0a, 0x03, 0x75, 0x60, 0x10, 0x4e, - 0x09, 0x5f, 0x47, 0x50, 0x45, 0x08, 0x5f, 0x48, - 0x49, 0x44, 0x0d, 0x41, 0x43, 0x50, 0x49, 0x30, - 0x30, 0x30, 0x36, 0x00, 0x14, 0x06, 0x5f, 0x4c, - 0x30, 0x30, 0x00, 0x14, 0x15, 0x5f, 0x45, 0x30, - 0x31, 0x00, 0x5c, 0x2f, 0x03, 0x5f, 0x53, 0x42, - 0x5f, 0x50, 0x43, 0x49, 0x30, 0x50, 0x43, 0x4e, - 0x46, 0x14, 0x10, 0x5f, 0x45, 0x30, 0x32, 0x00, - 0x5c, 0x2e, 0x5f, 0x53, 0x42, 0x5f, 0x50, 0x52, - 0x53, 0x43, 0x14, 0x06, 0x5f, 0x4c, 0x30, 0x33, - 0x00, 0x14, 0x06, 0x5f, 0x4c, 0x30, 0x34, 0x00, - 0x14, 0x06, 0x5f, 0x4c, 0x30, 0x35, 0x00, 0x14, - 0x06, 0x5f, 0x4c, 0x30, 0x36, 0x00, 0x14, 0x06, - 0x5f, 0x4c, 0x30, 0x37, 0x00, 0x14, 0x06, 0x5f, - 0x4c, 0x30, 0x38, 0x00, 0x14, 0x06, 0x5f, 0x4c, - 0x30, 0x39, 0x00, 0x14, 0x06, 0x5f, 0x4c, 0x30, - 0x41, 0x00, 0x14, 0x06, 0x5f, 0x4c, 0x30, 0x42, - 0x00, 0x14, 0x06, 0x5f, 0x4c, 0x30, 0x43, 0x00, - 0x14, 0x06, 0x5f, 0x4c, 0x30, 0x44, 0x00, 0x14, - 0x06, 0x5f, 0x4c, 0x30, 0x45, 0x00, 0x14, 0x06, - 0x5f, 0x4c, 0x30, 0x46, 0x00 -}; diff --git a/payloads/external/SeaBIOS/src/fw/acpi.c b/payloads/external/SeaBIOS/src/fw/acpi.c deleted file mode 100644 index 8bc2ca6b..00000000 --- a/payloads/external/SeaBIOS/src/fw/acpi.c +++ /dev/null @@ -1,685 +0,0 @@ -// Support for generating ACPI tables (on emulators) -// DO NOT ADD NEW FEATURES HERE. (See paravirt.c / biostables.c instead.) -// -// Copyright (C) 2008-2010 Kevin O'Connor <kevin@koconnor.net> -// Copyright (C) 2006 Fabrice Bellard -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "byteorder.h" // cpu_to_le16 -#include "config.h" // CONFIG_* -#include "dev-q35.h" -#include "dev-piix.h" -#include "hw/pcidevice.h" // pci_find_init_device -#include "hw/pci_ids.h" // PCI_VENDOR_ID_INTEL -#include "hw/pci_regs.h" // PCI_INTERRUPT_LINE -#include "malloc.h" // free -#include "output.h" // dprintf -#include "paravirt.h" // RamSize -#include "romfile.h" // romfile_loadint -#include "std/acpi.h" // struct rsdp_descriptor -#include "string.h" // memset -#include "util.h" // MaxCountCPUs -#include "x86.h" // readl - -#include "fw/acpi-dsdt.hex" - -static void -build_header(struct acpi_table_header *h, u32 sig, int len, u8 rev) -{ - h->signature = cpu_to_le32(sig); - h->length = cpu_to_le32(len); - h->revision = rev; - memcpy(h->oem_id, BUILD_APPNAME6, 6); - memcpy(h->oem_table_id, BUILD_APPNAME4, 4); - memcpy(h->oem_table_id + 4, (void*)&sig, 4); - h->oem_revision = cpu_to_le32(1); - memcpy(h->asl_compiler_id, BUILD_APPNAME4, 4); - h->asl_compiler_revision = cpu_to_le32(1); - h->checksum -= checksum(h, len); -} - -static void piix4_fadt_setup(struct pci_device *pci, void *arg) -{ - struct fadt_descriptor_rev1 *fadt = arg; - - fadt->model = 1; - fadt->reserved1 = 0; - fadt->sci_int = cpu_to_le16(PIIX_PM_INTRRUPT); - fadt->smi_cmd = cpu_to_le32(PORT_SMI_CMD); - fadt->acpi_enable = PIIX_ACPI_ENABLE; - fadt->acpi_disable = PIIX_ACPI_DISABLE; - fadt->pm1a_evt_blk = cpu_to_le32(acpi_pm_base); - fadt->pm1a_cnt_blk = cpu_to_le32(acpi_pm_base + 0x04); - fadt->pm_tmr_blk = cpu_to_le32(acpi_pm_base + 0x08); - fadt->gpe0_blk = cpu_to_le32(PIIX_GPE0_BLK); - fadt->pm1_evt_len = 4; - fadt->pm1_cnt_len = 2; - fadt->pm_tmr_len = 4; - fadt->gpe0_blk_len = PIIX_GPE0_BLK_LEN; - fadt->plvl2_lat = cpu_to_le16(0xfff); // C2 state not supported - fadt->plvl3_lat = cpu_to_le16(0xfff); // C3 state not supported - fadt->flags = cpu_to_le32(ACPI_FADT_F_WBINVD | - ACPI_FADT_F_PROC_C1 | - ACPI_FADT_F_SLP_BUTTON | - ACPI_FADT_F_RTC_S4 | - ACPI_FADT_F_USE_PLATFORM_CLOCK); -} - -/* PCI_VENDOR_ID_INTEL && PCI_DEVICE_ID_INTEL_ICH9_LPC */ -static void ich9_lpc_fadt_setup(struct pci_device *dev, void *arg) -{ - struct fadt_descriptor_rev1 *fadt = arg; - - fadt->model = 1; - fadt->reserved1 = 0; - fadt->sci_int = cpu_to_le16(9); - fadt->smi_cmd = cpu_to_le32(PORT_SMI_CMD); - fadt->acpi_enable = ICH9_ACPI_ENABLE; - fadt->acpi_disable = ICH9_ACPI_DISABLE; - fadt->pm1a_evt_blk = cpu_to_le32(acpi_pm_base); - fadt->pm1a_cnt_blk = cpu_to_le32(acpi_pm_base + 0x04); - fadt->pm_tmr_blk = cpu_to_le32(acpi_pm_base + 0x08); - fadt->gpe0_blk = cpu_to_le32(acpi_pm_base + ICH9_PMIO_GPE0_STS); - fadt->pm1_evt_len = 4; - fadt->pm1_cnt_len = 2; - fadt->pm_tmr_len = 4; - fadt->gpe0_blk_len = ICH9_PMIO_GPE0_BLK_LEN; - fadt->plvl2_lat = cpu_to_le16(0xfff); // C2 state not supported - fadt->plvl3_lat = cpu_to_le16(0xfff); // C3 state not supported - fadt->flags = cpu_to_le32(ACPI_FADT_F_WBINVD | - ACPI_FADT_F_PROC_C1 | - ACPI_FADT_F_SLP_BUTTON | - ACPI_FADT_F_RTC_S4 | - ACPI_FADT_F_USE_PLATFORM_CLOCK); -} - -static const struct pci_device_id fadt_init_tbl[] = { - /* PIIX4 Power Management device (for ACPI) */ - PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3, - piix4_fadt_setup), - PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_LPC, - ich9_lpc_fadt_setup), - PCI_DEVICE_END -}; - -static void fill_dsdt(struct fadt_descriptor_rev1 *fadt, void *dsdt) -{ - if (fadt->dsdt) { - free((void *)le32_to_cpu(fadt->dsdt)); - } - fadt->dsdt = cpu_to_le32((u32)dsdt); - fadt->checksum -= checksum(fadt, sizeof(*fadt)); - dprintf(1, "ACPI DSDT=%p\n", dsdt); -} - -static void * -build_fadt(struct pci_device *pci) -{ - struct fadt_descriptor_rev1 *fadt = malloc_high(sizeof(*fadt)); - struct facs_descriptor_rev1 *facs = memalign_high(64, sizeof(*facs)); - - if (!fadt || !facs) { - warn_noalloc(); - return NULL; - } - - /* FACS */ - memset(facs, 0, sizeof(*facs)); - facs->signature = cpu_to_le32(FACS_SIGNATURE); - facs->length = cpu_to_le32(sizeof(*facs)); - - /* FADT */ - memset(fadt, 0, sizeof(*fadt)); - fadt->firmware_ctrl = cpu_to_le32((u32)facs); - fadt->dsdt = 0; /* dsdt will be filled later in acpi_setup() - by fill_dsdt() */ - pci_init_device(fadt_init_tbl, pci, fadt); - - build_header((void*)fadt, FACP_SIGNATURE, sizeof(*fadt), 1); - - return fadt; -} - -static void* -build_madt(void) -{ - int madt_size = (sizeof(struct multiple_apic_table) - + sizeof(struct madt_processor_apic) * MaxCountCPUs - + sizeof(struct madt_io_apic) - + sizeof(struct madt_intsrcovr) * 16 - + sizeof(struct madt_local_nmi)); - - struct multiple_apic_table *madt = malloc_high(madt_size); - if (!madt) { - warn_noalloc(); - return NULL; - } - memset(madt, 0, madt_size); - madt->local_apic_address = cpu_to_le32(BUILD_APIC_ADDR); - madt->flags = cpu_to_le32(1); - struct madt_processor_apic *apic = (void*)&madt[1]; - int i; - for (i=0; i<MaxCountCPUs; i++) { - apic->type = APIC_PROCESSOR; - apic->length = sizeof(*apic); - apic->processor_id = i; - apic->local_apic_id = i; - if (apic_id_is_present(apic->local_apic_id)) - apic->flags = cpu_to_le32(1); - else - apic->flags = cpu_to_le32(0); - apic++; - } - struct madt_io_apic *io_apic = (void*)apic; - io_apic->type = APIC_IO; - io_apic->length = sizeof(*io_apic); - io_apic->io_apic_id = BUILD_IOAPIC_ID; - io_apic->address = cpu_to_le32(BUILD_IOAPIC_ADDR); - io_apic->interrupt = cpu_to_le32(0); - - struct madt_intsrcovr *intsrcovr = (void*)&io_apic[1]; - if (romfile_loadint("etc/irq0-override", 0)) { - memset(intsrcovr, 0, sizeof(*intsrcovr)); - intsrcovr->type = APIC_XRUPT_OVERRIDE; - intsrcovr->length = sizeof(*intsrcovr); - intsrcovr->source = 0; - intsrcovr->gsi = cpu_to_le32(2); - intsrcovr->flags = cpu_to_le16(0); /* conforms to bus specifications */ - intsrcovr++; - } - for (i = 1; i < 16; i++) { - if (!(BUILD_PCI_IRQS & (1 << i))) - /* No need for a INT source override structure. */ - continue; - memset(intsrcovr, 0, sizeof(*intsrcovr)); - intsrcovr->type = APIC_XRUPT_OVERRIDE; - intsrcovr->length = sizeof(*intsrcovr); - intsrcovr->source = i; - intsrcovr->gsi = cpu_to_le32(i); - intsrcovr->flags = cpu_to_le16(0xd); /* active high, level triggered */ - intsrcovr++; - } - - struct madt_local_nmi *local_nmi = (void*)intsrcovr; - local_nmi->type = APIC_LOCAL_NMI; - local_nmi->length = sizeof(*local_nmi); - local_nmi->processor_id = 0xff; /* all processors */ - local_nmi->flags = cpu_to_le16(0); - local_nmi->lint = 1; /* LINT1 */ - local_nmi++; - - build_header((void*)madt, APIC_SIGNATURE, (void*)local_nmi - (void*)madt, 1); - return madt; -} - -// Encode a hex value -static inline char getHex(u32 val) { - val &= 0x0f; - return (val <= 9) ? ('0' + val) : ('A' + val - 10); -} - -// Encode a length in an SSDT. -static u8 * -encodeLen(u8 *ssdt_ptr, int length, int bytes) -{ - switch (bytes) { - default: - case 4: ssdt_ptr[3] = ((length >> 20) & 0xff); - case 3: ssdt_ptr[2] = ((length >> 12) & 0xff); - case 2: ssdt_ptr[1] = ((length >> 4) & 0xff); - ssdt_ptr[0] = (((bytes-1) & 0x3) << 6) | (length & 0x0f); - break; - case 1: ssdt_ptr[0] = length & 0x3f; - } - return ssdt_ptr + bytes; -} - -#include "fw/ssdt-proc.hex" - -/* 0x5B 0x83 ProcessorOp PkgLength NameString ProcID */ -#define PROC_OFFSET_CPUHEX (*ssdt_proc_name - *ssdt_proc_start + 2) -#define PROC_OFFSET_CPUID1 (*ssdt_proc_name - *ssdt_proc_start + 4) -#define PROC_OFFSET_CPUID2 (*ssdt_proc_id - *ssdt_proc_start) -#define PROC_SIZEOF (*ssdt_proc_end - *ssdt_proc_start) -#define PROC_AML (ssdp_proc_aml + *ssdt_proc_start) - -/* 0x5B 0x82 DeviceOp PkgLength NameString */ -#define PCIHP_OFFSET_HEX (*ssdt_pcihp_name - *ssdt_pcihp_start + 1) -#define PCIHP_OFFSET_ID (*ssdt_pcihp_id - *ssdt_pcihp_start) -#define PCIHP_OFFSET_ADR (*ssdt_pcihp_adr - *ssdt_pcihp_start) -#define PCIHP_OFFSET_EJ0 (*ssdt_pcihp_ej0 - *ssdt_pcihp_start) -#define PCIHP_SIZEOF (*ssdt_pcihp_end - *ssdt_pcihp_start) -#define PCIHP_AML (ssdp_pcihp_aml + *ssdt_pcihp_start) -#define PCI_SLOTS 32 - -#define SSDT_SIGNATURE 0x54445353 // SSDT -#define SSDT_HEADER_LENGTH 36 - -#include "fw/ssdt-misc.hex" -#include "fw/ssdt-pcihp.hex" - -#define PCI_RMV_BASE 0xae0c - -static u8* -build_notify(u8 *ssdt_ptr, const char *name, int skip, int count, - const char *target, int ofs) -{ - count -= skip; - - *(ssdt_ptr++) = 0x14; // MethodOp - ssdt_ptr = encodeLen(ssdt_ptr, 2+5+(12*count), 2); - memcpy(ssdt_ptr, name, 4); - ssdt_ptr += 4; - *(ssdt_ptr++) = 0x02; // MethodOp - - int i; - for (i = skip; count-- > 0; i++) { - *(ssdt_ptr++) = 0xA0; // IfOp - ssdt_ptr = encodeLen(ssdt_ptr, 11, 1); - *(ssdt_ptr++) = 0x93; // LEqualOp - *(ssdt_ptr++) = 0x68; // Arg0Op - *(ssdt_ptr++) = 0x0A; // BytePrefix - *(ssdt_ptr++) = i; - *(ssdt_ptr++) = 0x86; // NotifyOp - memcpy(ssdt_ptr, target, 4); - ssdt_ptr[ofs] = getHex(i >> 4); - ssdt_ptr[ofs + 1] = getHex(i); - ssdt_ptr += 4; - *(ssdt_ptr++) = 0x69; // Arg1Op - } - return ssdt_ptr; -} - -static void patch_pcihp(int slot, u8 *ssdt_ptr, u32 eject) -{ - ssdt_ptr[PCIHP_OFFSET_HEX] = getHex(slot >> 4); - ssdt_ptr[PCIHP_OFFSET_HEX+1] = getHex(slot); - ssdt_ptr[PCIHP_OFFSET_ID] = slot; - ssdt_ptr[PCIHP_OFFSET_ADR + 2] = slot; - - /* Runtime patching of EJ0: to disable hotplug for a slot, - * replace the method name: _EJ0 by EJ0_. */ - /* Sanity check */ - if (memcmp(ssdt_ptr + PCIHP_OFFSET_EJ0, "_EJ0", 4)) { - warn_internalerror(); - } - if (!eject) { - memcpy(ssdt_ptr + PCIHP_OFFSET_EJ0, "EJ0_", 4); - } -} - -static void* -build_ssdt(void) -{ - int acpi_cpus = MaxCountCPUs > 0xff ? 0xff : MaxCountCPUs; - int length = (sizeof(ssdp_misc_aml) // _S3_ / _S4_ / _S5_ - + (1+3+4) // Scope(_SB_) - + (acpi_cpus * PROC_SIZEOF) // procs - + (1+2+5+(12*acpi_cpus)) // NTFY - + (6+2+1+(1*acpi_cpus)) // CPON - + (1+3+4) // Scope(PCI0) - + ((PCI_SLOTS - 1) * PCIHP_SIZEOF) // slots - + (1+2+5+(12*(PCI_SLOTS - 1)))); // PCNT - u8 *ssdt = malloc_high(length); - if (! ssdt) { - warn_noalloc(); - return NULL; - } - u8 *ssdt_ptr = ssdt; - - // Copy header and encode fwcfg values in the S3_ / S4_ / S5_ packages - int sys_state_size; - char *sys_states = romfile_loadfile("etc/system-states", &sys_state_size); - if (!sys_states || sys_state_size != 6) - sys_states = (char[]){128, 0, 0, 129, 128, 128}; - - memcpy(ssdt_ptr, ssdp_misc_aml, sizeof(ssdp_misc_aml)); - if (!(sys_states[3] & 128)) - ssdt_ptr[acpi_s3_name[0]] = 'X'; - if (!(sys_states[4] & 128)) - ssdt_ptr[acpi_s4_name[0]] = 'X'; - else - ssdt_ptr[acpi_s4_pkg[0] + 1] = ssdt[acpi_s4_pkg[0] + 3] = sys_states[4] & 127; - - // store pci io windows - *(u32*)&ssdt_ptr[acpi_pci32_start[0]] = cpu_to_le32(pcimem_start); - *(u32*)&ssdt_ptr[acpi_pci32_end[0]] = cpu_to_le32(pcimem_end - 1); - if (pcimem64_start) { - ssdt_ptr[acpi_pci64_valid[0]] = 1; - *(u64*)&ssdt_ptr[acpi_pci64_start[0]] = cpu_to_le64(pcimem64_start); - *(u64*)&ssdt_ptr[acpi_pci64_end[0]] = cpu_to_le64(pcimem64_end - 1); - *(u64*)&ssdt_ptr[acpi_pci64_length[0]] = cpu_to_le64( - pcimem64_end - pcimem64_start); - } else { - ssdt_ptr[acpi_pci64_valid[0]] = 0; - } - - int pvpanic_port = romfile_loadint("etc/pvpanic-port", 0x0); - *(u16 *)(ssdt_ptr + *ssdt_isa_pest) = pvpanic_port; - - ssdt_ptr += sizeof(ssdp_misc_aml); - - // build Scope(_SB_) header - *(ssdt_ptr++) = 0x10; // ScopeOp - ssdt_ptr = encodeLen(ssdt_ptr, length - (ssdt_ptr - ssdt), 3); - *(ssdt_ptr++) = '_'; - *(ssdt_ptr++) = 'S'; - *(ssdt_ptr++) = 'B'; - *(ssdt_ptr++) = '_'; - - // build Processor object for each processor - int i; - for (i=0; i<acpi_cpus; i++) { - memcpy(ssdt_ptr, PROC_AML, PROC_SIZEOF); - ssdt_ptr[PROC_OFFSET_CPUHEX] = getHex(i >> 4); - ssdt_ptr[PROC_OFFSET_CPUHEX+1] = getHex(i); - ssdt_ptr[PROC_OFFSET_CPUID1] = i; - ssdt_ptr[PROC_OFFSET_CPUID2] = i; - ssdt_ptr += PROC_SIZEOF; - } - - // build "Method(NTFY, 2) {If (LEqual(Arg0, 0x00)) {Notify(CP00, Arg1)} ...}" - // Arg0 = Processor ID = APIC ID - ssdt_ptr = build_notify(ssdt_ptr, "NTFY", 0, acpi_cpus, "CP00", 2); - - // build "Name(CPON, Package() { One, One, ..., Zero, Zero, ... })" - *(ssdt_ptr++) = 0x08; // NameOp - *(ssdt_ptr++) = 'C'; - *(ssdt_ptr++) = 'P'; - *(ssdt_ptr++) = 'O'; - *(ssdt_ptr++) = 'N'; - *(ssdt_ptr++) = 0x12; // PackageOp - ssdt_ptr = encodeLen(ssdt_ptr, 2+1+(1*acpi_cpus), 2); - *(ssdt_ptr++) = acpi_cpus; - for (i=0; i<acpi_cpus; i++) - *(ssdt_ptr++) = (apic_id_is_present(i)) ? 0x01 : 0x00; - - // build Scope(PCI0) opcode - *(ssdt_ptr++) = 0x10; // ScopeOp - ssdt_ptr = encodeLen(ssdt_ptr, length - (ssdt_ptr - ssdt), 3); - *(ssdt_ptr++) = 'P'; - *(ssdt_ptr++) = 'C'; - *(ssdt_ptr++) = 'I'; - *(ssdt_ptr++) = '0'; - - // build Device object for each slot - u32 rmvc_pcrm = inl(PCI_RMV_BASE); - for (i=1; i<PCI_SLOTS; i++) { - u32 eject = rmvc_pcrm & (0x1 << i); - memcpy(ssdt_ptr, PCIHP_AML, PCIHP_SIZEOF); - patch_pcihp(i, ssdt_ptr, eject != 0); - ssdt_ptr += PCIHP_SIZEOF; - } - - ssdt_ptr = build_notify(ssdt_ptr, "PCNT", 1, PCI_SLOTS, "S00_", 1); - - build_header((void*)ssdt, SSDT_SIGNATURE, ssdt_ptr - ssdt, 1); - - //hexdump(ssdt, ssdt_ptr - ssdt); - - return ssdt; -} - -#define HPET_ID 0x000 -#define HPET_PERIOD 0x004 - -static void* -build_hpet(void) -{ - struct acpi_20_hpet *hpet; - const void *hpet_base = (void *)BUILD_HPET_ADDRESS; - u32 hpet_vendor = readl(hpet_base + HPET_ID) >> 16; - u32 hpet_period = readl(hpet_base + HPET_PERIOD); - - if (hpet_vendor == 0 || hpet_vendor == 0xffff || - hpet_period == 0 || hpet_period > 100000000) - return NULL; - - hpet = malloc_high(sizeof(*hpet)); - if (!hpet) { - warn_noalloc(); - return NULL; - } - - memset(hpet, 0, sizeof(*hpet)); - /* Note timer_block_id value must be kept in sync with value advertised by - * emulated hpet - */ - hpet->timer_block_id = cpu_to_le32(0x8086a201); - hpet->addr.address = cpu_to_le64(BUILD_HPET_ADDRESS); - build_header((void*)hpet, HPET_SIGNATURE, sizeof(*hpet), 1); - - return hpet; -} - -static void -acpi_build_srat_memory(struct srat_memory_affinity *numamem, - u64 base, u64 len, int node, int enabled) -{ - numamem->type = SRAT_MEMORY; - numamem->length = sizeof(*numamem); - memset(numamem->proximity, 0, 4); - numamem->proximity[0] = node; - numamem->flags = cpu_to_le32(!!enabled); - numamem->base_addr = cpu_to_le64(base); - numamem->range_length = cpu_to_le64(len); -} - -static void * -build_srat(void) -{ - int numadatasize, numacpusize; - u64 *numadata = romfile_loadfile("etc/numa-nodes", &numadatasize); - u64 *numacpumap = romfile_loadfile("etc/numa-cpu-map", &numacpusize); - if (!numadata || !numacpumap) - goto fail; - int max_cpu = numacpusize / sizeof(u64); - int nb_numa_nodes = numadatasize / sizeof(u64); - - struct system_resource_affinity_table *srat; - int srat_size = sizeof(*srat) + - sizeof(struct srat_processor_affinity) * max_cpu + - sizeof(struct srat_memory_affinity) * (nb_numa_nodes + 2); - - srat = malloc_high(srat_size); - if (!srat) { - warn_noalloc(); - goto fail; - } - - memset(srat, 0, srat_size); - srat->reserved1=cpu_to_le32(1); - struct srat_processor_affinity *core = (void*)(srat + 1); - int i; - u64 curnode; - - for (i = 0; i < max_cpu; ++i) { - core->type = SRAT_PROCESSOR; - core->length = sizeof(*core); - core->local_apic_id = i; - curnode = *numacpumap++; - core->proximity_lo = curnode; - memset(core->proximity_hi, 0, 3); - core->local_sapic_eid = 0; - if (apic_id_is_present(i)) - core->flags = cpu_to_le32(1); - else - core->flags = cpu_to_le32(0); - core++; - } - - - /* the memory map is a bit tricky, it contains at least one hole - * from 640k-1M and possibly another one from 3.5G-4G. - */ - struct srat_memory_affinity *numamem = (void*)core; - int slots = 0; - u64 mem_len, mem_base, next_base = 0; - - acpi_build_srat_memory(numamem, 0, 640*1024, 0, 1); - next_base = 1024 * 1024; - numamem++; - slots++; - for (i = 1; i < nb_numa_nodes + 1; ++i) { - mem_base = next_base; - mem_len = *numadata++; - if (i == 1) - mem_len -= 1024 * 1024; - next_base = mem_base + mem_len; - - /* Cut out the PCI hole */ - if (mem_base <= RamSize && next_base > RamSize) { - mem_len -= next_base - RamSize; - if (mem_len > 0) { - acpi_build_srat_memory(numamem, mem_base, mem_len, i-1, 1); - numamem++; - slots++; - } - mem_base = 1ULL << 32; - mem_len = next_base - RamSize; - next_base += (1ULL << 32) - RamSize; - } - acpi_build_srat_memory(numamem, mem_base, mem_len, i-1, 1); - numamem++; - slots++; - } - for (; slots < nb_numa_nodes + 2; slots++) { - acpi_build_srat_memory(numamem, 0, 0, 0, 0); - numamem++; - } - - build_header((void*)srat, SRAT_SIGNATURE, srat_size, 1); - - free(numadata); - free(numacpumap); - return srat; -fail: - free(numadata); - free(numacpumap); - return NULL; -} - -static void * -build_mcfg_q35(void) -{ - struct acpi_table_mcfg *mcfg; - - int len = sizeof(*mcfg) + 1 * sizeof(mcfg->allocation[0]); - mcfg = malloc_high(len); - if (!mcfg) { - warn_noalloc(); - return NULL; - } - memset(mcfg, 0, len); - mcfg->allocation[0].address = cpu_to_le64(Q35_HOST_BRIDGE_PCIEXBAR_ADDR); - mcfg->allocation[0].pci_segment = cpu_to_le16(Q35_HOST_PCIE_PCI_SEGMENT); - mcfg->allocation[0].start_bus_number = Q35_HOST_PCIE_START_BUS_NUMBER; - mcfg->allocation[0].end_bus_number = Q35_HOST_PCIE_END_BUS_NUMBER; - - build_header((void *)mcfg, MCFG_SIGNATURE, len, 1); - return mcfg; -} - -static const struct pci_device_id acpi_find_tbl[] = { - /* PIIX4 Power Management device. */ - PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3, NULL), - PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_LPC, NULL), - PCI_DEVICE_END, -}; - -#define MAX_ACPI_TABLES 20 -void -acpi_setup(void) -{ - if (! CONFIG_ACPI) - return; - - dprintf(3, "init ACPI tables\n"); - - // This code is hardcoded for PIIX4 Power Management device. - struct pci_device *pci = pci_find_init_device(acpi_find_tbl, NULL); - if (!pci) - // Device not found - return; - - // Build ACPI tables - u32 tables[MAX_ACPI_TABLES], tbl_idx = 0; - -#define ACPI_INIT_TABLE(X) \ - do { \ - tables[tbl_idx] = cpu_to_le32((u32)(X)); \ - if (le32_to_cpu(tables[tbl_idx])) \ - tbl_idx++; \ - } while(0) - - struct fadt_descriptor_rev1 *fadt = build_fadt(pci); - ACPI_INIT_TABLE(fadt); - ACPI_INIT_TABLE(build_ssdt()); - ACPI_INIT_TABLE(build_madt()); - ACPI_INIT_TABLE(build_hpet()); - ACPI_INIT_TABLE(build_srat()); - if (pci->device == PCI_DEVICE_ID_INTEL_ICH9_LPC) - ACPI_INIT_TABLE(build_mcfg_q35()); - - struct romfile_s *file = NULL; - for (;;) { - file = romfile_findprefix("acpi/", file); - if (!file) - break; - struct acpi_table_header *table = malloc_high(file->size); - if (!table) { - warn_noalloc(); - continue; - } - int ret = file->copy(file, table, file->size); - if (ret <= sizeof(*table)) - continue; - if (table->signature == DSDT_SIGNATURE) { - if (fadt) { - fill_dsdt(fadt, table); - } - } else { - ACPI_INIT_TABLE(table); - } - if (tbl_idx == MAX_ACPI_TABLES) { - warn_noalloc(); - break; - } - } - - if (CONFIG_ACPI_DSDT && fadt && !fadt->dsdt) { - /* default DSDT */ - struct acpi_table_header *dsdt = malloc_high(sizeof(AmlCode)); - if (!dsdt) { - warn_noalloc(); - return; - } - memcpy(dsdt, AmlCode, sizeof(AmlCode)); - fill_dsdt(fadt, dsdt); - /* Strip out compiler-generated header if any */ - memset(dsdt, 0, sizeof *dsdt); - build_header(dsdt, DSDT_SIGNATURE, sizeof(AmlCode), 1); - } - - // Build final rsdt table - struct rsdt_descriptor_rev1 *rsdt; - size_t rsdt_len = sizeof(*rsdt) + sizeof(u32) * tbl_idx; - rsdt = malloc_high(rsdt_len); - if (!rsdt) { - warn_noalloc(); - return; - } - memset(rsdt, 0, rsdt_len); - memcpy(rsdt->table_offset_entry, tables, sizeof(u32) * tbl_idx); - build_header((void*)rsdt, RSDT_SIGNATURE, rsdt_len, 1); - - // Build rsdp pointer table - struct rsdp_descriptor rsdp; - memset(&rsdp, 0, sizeof(rsdp)); - rsdp.signature = cpu_to_le64(RSDP_SIGNATURE); - memcpy(rsdp.oem_id, BUILD_APPNAME6, 6); - rsdp.rsdt_physical_address = cpu_to_le32((u32)rsdt); - rsdp.checksum -= checksum(&rsdp, 20); - copy_acpi_rsdp(&rsdp); -} diff --git a/payloads/external/SeaBIOS/src/fw/biostables.c b/payloads/external/SeaBIOS/src/fw/biostables.c deleted file mode 100644 index 794b5be8..00000000 --- a/payloads/external/SeaBIOS/src/fw/biostables.c +++ /dev/null @@ -1,518 +0,0 @@ -// Support for manipulating bios tables (pir, mptable, acpi, smbios). -// -// Copyright (C) 2008,2009 Kevin O'Connor <kevin@koconnor.net> -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "byteorder.h" // le32_to_cpu -#include "config.h" // CONFIG_* -#include "hw/pci.h" // pci_config_writeb -#include "malloc.h" // malloc_fseg -#include "memmap.h" // SYMBOL -#include "output.h" // dprintf -#include "romfile.h" // romfile_find -#include "std/acpi.h" // struct rsdp_descriptor -#include "std/mptable.h" // MPTABLE_SIGNATURE -#include "std/pirtable.h" // struct pir_header -#include "std/smbios.h" // struct smbios_entry_point -#include "string.h" // memcpy -#include "util.h" // copy_table -#include "x86.h" // outb - -struct pir_header *PirAddr VARFSEG; - -void -copy_pir(void *pos) -{ - struct pir_header *p = pos; - if (p->signature != PIR_SIGNATURE) - return; - if (PirAddr) - return; - if (p->size < sizeof(*p)) - return; - if (checksum(pos, p->size) != 0) - return; - void *newpos = malloc_fseg(p->size); - if (!newpos) { - warn_noalloc(); - return; - } - dprintf(1, "Copying PIR from %p to %p\n", pos, newpos); - memcpy(newpos, pos, p->size); - PirAddr = newpos; -} - -void -copy_mptable(void *pos) -{ - struct mptable_floating_s *p = pos; - if (p->signature != MPTABLE_SIGNATURE) - return; - if (!p->physaddr) - return; - if (checksum(pos, sizeof(*p)) != 0) - return; - u32 length = p->length * 16; - u16 mpclength = ((struct mptable_config_s *)p->physaddr)->length; - if (length + mpclength > BUILD_MAX_MPTABLE_FSEG) { - dprintf(1, "Skipping MPTABLE copy due to large size (%d bytes)\n" - , length + mpclength); - return; - } - // Allocate final memory location. (In theory the config - // structure can go in high memory, but Linux kernels before - // v2.6.30 crash with that.) - struct mptable_floating_s *newpos = malloc_fseg(length + mpclength); - if (!newpos) { - warn_noalloc(); - return; - } - dprintf(1, "Copying MPTABLE from %p/%x to %p\n", pos, p->physaddr, newpos); - memcpy(newpos, pos, length); - newpos->physaddr = (u32)newpos + length; - newpos->checksum -= checksum(newpos, sizeof(*newpos)); - memcpy((void*)newpos + length, (void*)p->physaddr, mpclength); -} - - -/**************************************************************** - * ACPI - ****************************************************************/ - -static int -get_acpi_rsdp_length(void *pos, unsigned size) -{ - struct rsdp_descriptor *p = pos; - if (p->signature != RSDP_SIGNATURE) - return -1; - u32 length = 20; - if (length > size) - return -1; - if (checksum(pos, length) != 0) - return -1; - if (p->revision > 1) { - length = p->length; - if (length > size) - return -1; - if (checksum(pos, length) != 0) - return -1; - } - return length; -} - -struct rsdp_descriptor *RsdpAddr; - -void -copy_acpi_rsdp(void *pos) -{ - if (RsdpAddr) - return; - int length = get_acpi_rsdp_length(pos, -1); - if (length < 0) - return; - void *newpos = malloc_fseg(length); - if (!newpos) { - warn_noalloc(); - return; - } - dprintf(1, "Copying ACPI RSDP from %p to %p\n", pos, newpos); - memcpy(newpos, pos, length); - RsdpAddr = newpos; -} - -void *find_acpi_rsdp(void) -{ - unsigned long start = SYMBOL(zonefseg_start); - unsigned long end = SYMBOL(zonefseg_end); - unsigned long pos; - - for (pos = ALIGN(start, 0x10); pos <= ALIGN_DOWN(end, 0x10); pos += 0x10) - if (get_acpi_rsdp_length((void *)pos, end - pos) >= 0) - return (void *)pos; - - return NULL; -} - -void * -find_acpi_table(u32 signature) -{ - dprintf(4, "rsdp=%p\n", RsdpAddr); - if (!RsdpAddr || RsdpAddr->signature != RSDP_SIGNATURE) - return NULL; - struct rsdt_descriptor_rev1 *rsdt = (void*)RsdpAddr->rsdt_physical_address; - struct xsdt_descriptor_rev2 *xsdt = - RsdpAddr->xsdt_physical_address >= 0x100000000 - ? NULL : (void*)(u32)(RsdpAddr->xsdt_physical_address); - dprintf(4, "rsdt=%p\n", rsdt); - dprintf(4, "xsdt=%p\n", xsdt); - - if (xsdt && xsdt->signature == XSDT_SIGNATURE) { - void *end = (void*)xsdt + xsdt->length; - int i; - for (i=0; (void*)&xsdt->table_offset_entry[i] < end; i++) { - if (xsdt->table_offset_entry[i] >= 0x100000000) - continue; /* above 4G */ - struct acpi_table_header *tbl = (void*)(u32)xsdt->table_offset_entry[i]; - if (!tbl || tbl->signature != signature) - continue; - dprintf(1, "table(%x)=%p (via xsdt)\n", signature, tbl); - return tbl; - } - } - - if (rsdt && rsdt->signature == RSDT_SIGNATURE) { - void *end = (void*)rsdt + rsdt->length; - int i; - for (i=0; (void*)&rsdt->table_offset_entry[i] < end; i++) { - struct acpi_table_header *tbl = (void*)rsdt->table_offset_entry[i]; - if (!tbl || tbl->signature != signature) - continue; - dprintf(1, "table(%x)=%p (via rsdt)\n", signature, tbl); - return tbl; - } - } - - dprintf(4, "no table %x found\n", signature); - return NULL; -} - -u32 -find_resume_vector(void) -{ - struct fadt_descriptor_rev1 *fadt = find_acpi_table(FACP_SIGNATURE); - if (!fadt) - return 0; - struct facs_descriptor_rev1 *facs = (void*)fadt->firmware_ctrl; - dprintf(4, "facs=%p\n", facs); - if (! facs || facs->signature != FACS_SIGNATURE) - return 0; - // Found it. - dprintf(4, "resume addr=%d\n", facs->firmware_waking_vector); - return facs->firmware_waking_vector; -} - -static struct acpi_20_generic_address acpi_reset_reg; -static u8 acpi_reset_val; -u32 acpi_pm1a_cnt VARFSEG; -u16 acpi_pm_base = 0xb000; - -#define acpi_ga_to_bdf(addr) pci_to_bdf(0, (addr >> 32) & 0xffff, (addr >> 16) & 0xffff) - -void -acpi_reboot(void) -{ - // Check it passed the sanity checks in acpi_set_reset_reg() and was set - if (acpi_reset_reg.register_bit_width != 8) - return; - - u64 addr = le64_to_cpu(acpi_reset_reg.address); - - dprintf(1, "ACPI hard reset %d:%llx (%x)\n", - acpi_reset_reg.address_space_id, addr, acpi_reset_val); - - switch (acpi_reset_reg.address_space_id) { - case 0: // System Memory - writeb((void *)(u32)addr, acpi_reset_val); - break; - case 1: // System I/O - outb(acpi_reset_val, addr); - break; - case 2: // PCI config space - pci_config_writeb(acpi_ga_to_bdf(addr), addr & 0xffff, acpi_reset_val); - break; - } -} - -static void -acpi_set_reset_reg(struct acpi_20_generic_address *reg, u8 val) -{ - if (!reg || reg->address_space_id > 2 || - reg->register_bit_width != 8 || reg->register_bit_offset) - return; - - acpi_reset_reg = *reg; - acpi_reset_val = val; -} - -void -find_acpi_features(void) -{ - struct fadt_descriptor_rev1 *fadt = find_acpi_table(FACP_SIGNATURE); - if (!fadt) - return; - u32 pm_tmr = le32_to_cpu(fadt->pm_tmr_blk); - u32 pm1a_cnt = le32_to_cpu(fadt->pm1a_cnt_blk); - dprintf(4, "pm_tmr_blk=%x\n", pm_tmr); - if (pm_tmr) - pmtimer_setup(pm_tmr); - if (pm1a_cnt) - acpi_pm1a_cnt = pm1a_cnt; - - // Theoretically we should check the 'reset_reg_sup' flag, but Windows - // doesn't and thus nobody seems to *set* it. If the table is large enough - // to include it, let the sanity checks in acpi_set_reset_reg() suffice. - if (fadt->length >= 129) { - void *p = fadt; - acpi_set_reset_reg(p + 116, *(u8 *)(p + 128)); - } - acpi_dsdt_parse(); -} - - -/**************************************************************** - * SMBIOS - ****************************************************************/ - -// Iterator for each sub-table in the smbios blob. -void * -smbios_next(struct smbios_entry_point *smbios, void *prev) -{ - if (!smbios) - return NULL; - void *start = (void*)smbios->structure_table_address; - void *end = start + smbios->structure_table_length; - - if (!prev) { - prev = start; - } else { - struct smbios_structure_header *hdr = prev; - if (prev + sizeof(*hdr) > end) - return NULL; - prev += hdr->length + 2; - while (prev < end && (*(u8*)(prev-1) != '\0' || *(u8*)(prev-2) != '\0')) - prev++; - } - struct smbios_structure_header *hdr = prev; - if (prev >= end || prev + sizeof(*hdr) >= end || prev + hdr->length >= end) - return NULL; - return prev; -} - -struct smbios_entry_point *SMBiosAddr; - -void -copy_smbios(void *pos) -{ - if (SMBiosAddr) - return; - struct smbios_entry_point *p = pos; - if (p->signature != SMBIOS_SIGNATURE) - return; - if (checksum(pos, 0x10) != 0) - return; - if (memcmp(p->intermediate_anchor_string, "_DMI_", 5)) - return; - if (checksum(pos+0x10, p->length-0x10) != 0) - return; - struct smbios_entry_point *newpos = malloc_fseg(p->length); - if (!newpos) { - warn_noalloc(); - return; - } - dprintf(1, "Copying SMBIOS entry point from %p to %p\n", pos, newpos); - memcpy(newpos, pos, p->length); - SMBiosAddr = newpos; -} - -void -display_uuid(void) -{ - struct smbios_type_1 *tbl = smbios_next(SMBiosAddr, NULL); - int minlen = offsetof(struct smbios_type_1, uuid) + sizeof(tbl->uuid); - for (; tbl; tbl = smbios_next(SMBiosAddr, tbl)) - if (tbl->header.type == 1 && tbl->header.length >= minlen) { - u8 *uuid = tbl->uuid; - u8 empty_uuid[sizeof(tbl->uuid)] = { 0 }; - if (memcmp(uuid, empty_uuid, sizeof(empty_uuid)) == 0) - return; - - /* - * According to SMBIOS v2.6 the first three fields are encoded in - * little-endian format. Versions prior to v2.6 did not specify - * the encoding, but we follow dmidecode and assume big-endian - * encoding. - */ - if (SMBiosAddr->smbios_major_version > 2 || - (SMBiosAddr->smbios_major_version == 2 && - SMBiosAddr->smbios_minor_version >= 6)) { - printf("Machine UUID" - " %02x%02x%02x%02x" - "-%02x%02x" - "-%02x%02x" - "-%02x%02x" - "-%02x%02x%02x%02x%02x%02x\n" - , uuid[ 3], uuid[ 2], uuid[ 1], uuid[ 0] - , uuid[ 5], uuid[ 4] - , uuid[ 7], uuid[ 6] - , uuid[ 8], uuid[ 9] - , uuid[10], uuid[11], uuid[12] - , uuid[13], uuid[14], uuid[15]); - } else { - printf("Machine UUID" - " %02x%02x%02x%02x" - "-%02x%02x" - "-%02x%02x" - "-%02x%02x" - "-%02x%02x%02x%02x%02x%02x\n" - , uuid[ 0], uuid[ 1], uuid[ 2], uuid[ 3] - , uuid[ 4], uuid[ 5] - , uuid[ 6], uuid[ 7] - , uuid[ 8], uuid[ 9] - , uuid[10], uuid[11], uuid[12] - , uuid[13], uuid[14], uuid[15]); - } - - return; - } -} - -#define set_str_field_or_skip(type, field, value) \ - do { \ - int size = (value != NULL) ? strlen(value) + 1 : 0; \ - if (size > 1) { \ - memcpy(end, value, size); \ - end += size; \ - p->field = ++str_index; \ - } else { \ - p->field = 0; \ - } \ - } while (0) - -static void * -smbios_new_type_0(void *start, - const char *vendor, const char *version, const char *date) -{ - struct smbios_type_0 *p = (struct smbios_type_0 *)start; - char *end = (char *)start + sizeof(struct smbios_type_0); - int str_index = 0; - - p->header.type = 0; - p->header.length = sizeof(struct smbios_type_0); - p->header.handle = 0; - - set_str_field_or_skip(0, vendor_str, vendor); - set_str_field_or_skip(0, bios_version_str, version); - p->bios_starting_address_segment = 0xe800; - set_str_field_or_skip(0, bios_release_date_str, date); - - p->bios_rom_size = 0; /* FIXME */ - - /* BIOS characteristics not supported */ - memset(p->bios_characteristics, 0, 8); - p->bios_characteristics[0] = 0x08; - - /* Enable targeted content distribution (needed for SVVP) */ - p->bios_characteristics_extension_bytes[0] = 0; - p->bios_characteristics_extension_bytes[1] = 4; - - p->system_bios_major_release = 0; - p->system_bios_minor_release = 0; - p->embedded_controller_major_release = 0xFF; - p->embedded_controller_minor_release = 0xFF; - - *end = 0; - end++; - if (!str_index) { - *end = 0; - end++; - } - - return end; -} - -#define BIOS_NAME "SeaBIOS" -#define BIOS_DATE "04/01/2014" - -static int -smbios_romfile_setup(void) -{ - struct romfile_s *f_anchor = romfile_find("etc/smbios/smbios-anchor"); - struct romfile_s *f_tables = romfile_find("etc/smbios/smbios-tables"); - struct smbios_entry_point ep; - struct smbios_type_0 *t0; - u16 qtables_len, need_t0 = 1; - u8 *qtables, *tables; - - if (!f_anchor || !f_tables || f_anchor->size != sizeof(ep)) - return 0; - - f_anchor->copy(f_anchor, &ep, f_anchor->size); - - if (f_tables->size != ep.structure_table_length) - return 0; - - qtables = malloc_tmphigh(f_tables->size); - if (!qtables) { - warn_noalloc(); - return 0; - } - f_tables->copy(f_tables, qtables, f_tables->size); - ep.structure_table_address = (u32)qtables; /* for smbios_next(), below */ - - /* did we get a type 0 structure ? */ - for (t0 = smbios_next(&ep, NULL); t0; t0 = smbios_next(&ep, t0)) - if (t0->header.type == 0) { - need_t0 = 0; - break; - } - - qtables_len = ep.structure_table_length; - if (need_t0) { - /* common case: add our own type 0, with 3 strings and 4 '\0's */ - u16 t0_len = sizeof(struct smbios_type_0) + strlen(BIOS_NAME) + - strlen(VERSION) + strlen(BIOS_DATE) + 4; - if (t0_len > (0xffff - ep.structure_table_length)) { - dprintf(1, "Insufficient space (%d bytes) to add SMBIOS type 0 table (%d bytes)\n", - 0xffff - ep.structure_table_length, t0_len); - need_t0 = 0; - } else { - ep.structure_table_length += t0_len; - if (t0_len > ep.max_structure_size) - ep.max_structure_size = t0_len; - ep.number_of_structures++; - } - } - - /* allocate final blob and record its address in the entry point */ - if (ep.structure_table_length > BUILD_MAX_SMBIOS_FSEG) - tables = malloc_high(ep.structure_table_length); - else - tables = malloc_fseg(ep.structure_table_length); - if (!tables) { - warn_noalloc(); - free(qtables); - return 0; - } - ep.structure_table_address = (u32)tables; - - /* populate final blob */ - if (need_t0) - tables = smbios_new_type_0(tables, BIOS_NAME, VERSION, BIOS_DATE); - memcpy(tables, qtables, qtables_len); - free(qtables); - - /* finalize entry point */ - ep.checksum -= checksum(&ep, 0x10); - ep.intermediate_checksum -= checksum((void *)&ep + 0x10, ep.length - 0x10); - - copy_smbios(&ep); - return 1; -} - -void -smbios_setup(void) -{ - if (smbios_romfile_setup()) - return; - smbios_legacy_setup(); -} - -void -copy_table(void *pos) -{ - copy_pir(pos); - copy_mptable(pos); - copy_acpi_rsdp(pos); - copy_smbios(pos); -} diff --git a/payloads/external/SeaBIOS/src/fw/coreboot.c b/payloads/external/SeaBIOS/src/fw/coreboot.c deleted file mode 100644 index 7c0954b5..00000000 --- a/payloads/external/SeaBIOS/src/fw/coreboot.c +++ /dev/null @@ -1,569 +0,0 @@ -// Coreboot interface support. -// -// Copyright (C) 2008,2009 Kevin O'Connor <kevin@koconnor.net> -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "block.h" // MAXDESCSIZE -#include "byteorder.h" // be32_to_cpu -#include "config.h" // CONFIG_* -#include "e820map.h" // e820_add -#include "hw/pcidevice.h" // pci_probe_devices -#include "lzmadecode.h" // LzmaDecode -#include "malloc.h" // free -#include "output.h" // dprintf -#include "paravirt.h" // PlatformRunningOn -#include "romfile.h" // romfile_findprefix -#include "stacks.h" // yield -#include "string.h" // memset -#include "util.h" // coreboot_preinit - - -/**************************************************************** - * Memory map - ****************************************************************/ - -struct cb_header { - u32 signature; - u32 header_bytes; - u32 header_checksum; - u32 table_bytes; - u32 table_checksum; - u32 table_entries; -}; - -#define CB_SIGNATURE 0x4f49424C // "LBIO" - -struct cb_memory_range { - u64 start; - u64 size; - u32 type; -}; - -#define CB_MEM_TABLE 16 - -struct cb_memory { - u32 tag; - u32 size; - struct cb_memory_range map[0]; -}; - -#define CB_TAG_MEMORY 0x01 - -#define MEM_RANGE_COUNT(_rec) \ - (((_rec)->size - sizeof(*(_rec))) / sizeof((_rec)->map[0])) - -struct cb_mainboard { - u32 tag; - u32 size; - u8 vendor_idx; - u8 part_idx; - char strings[0]; -}; - -#define CB_TAG_MAINBOARD 0x0003 - -struct cb_forward { - u32 tag; - u32 size; - u64 forward; -}; - -#define CB_TAG_FORWARD 0x11 - -struct cb_cbmem_ref { - u32 tag; - u32 size; - u64 cbmem_addr; -}; - -#define CB_TAG_CBMEM_CONSOLE 0x17 - -struct cbmem_console { - u32 size; - u32 cursor; - u8 body[0]; -} PACKED; -#define CBMC_CURSOR_MASK ((1 << 28) - 1) -#define CBMC_OVERFLOW (1 << 31) -static struct cbmem_console *cbcon = NULL; - -static u16 -ipchksum(char *buf, int count) -{ - u16 *p = (u16*)buf; - u32 sum = 0; - while (count > 1) { - sum += GET_FARVAR(0, *p); - p++; - count -= 2; - } - if (count) - sum += GET_FARVAR(0, *(u8*)p); - sum = (sum >> 16) + (sum & 0xffff); - sum += (sum >> 16); - return ~sum; -} - -// Try to locate the coreboot header in a given address range. -static struct cb_header * -find_cb_header(u32 addr, int len) -{ - u32 end = addr + len; - for (; addr < end; addr += 16) { - struct cb_header *cbh = (void*)addr; - if (GET_FARVAR(0, cbh->signature) != CB_SIGNATURE) - continue; - u32 tsize = GET_FARVAR(0, cbh->table_bytes); - if (! tsize) - continue; - if (ipchksum((void*)addr, sizeof(*cbh)) != 0) - continue; - if (ipchksum((void*)addr + sizeof(*cbh), tsize) - != GET_FARVAR(0, cbh->table_checksum)) - continue; - return cbh; - } - return NULL; -} - -// Try to find the coreboot memory table in the given coreboot table. -void * -find_cb_subtable(struct cb_header *cbh, u32 tag) -{ - char *tbl = (char *)cbh + sizeof(*cbh); - u32 count = GET_FARVAR(0, cbh->table_entries); - int i; - for (i=0; i<count; i++) { - struct cb_memory *cbm = (void*)tbl; - tbl += GET_FARVAR(0, cbm->size); - if (GET_FARVAR(0, cbm->tag) == tag) - return cbm; - } - return NULL; -} - -struct cb_header * -find_cb_table(void) -{ - struct cb_header *cbh = find_cb_header(0, 0x1000); - if (!cbh) - return NULL; - struct cb_forward *cbf = find_cb_subtable(cbh, CB_TAG_FORWARD); - if (cbf) { - dprintf(3, "Found coreboot table forwarder.\n"); - cbh = find_cb_header(GET_FARVAR(0, cbf->forward), 0x100); - if (!cbh) - return NULL; - } - return cbh; -} - -static struct cb_memory *CBMemTable; -const char *CBvendor = "", *CBpart = ""; - -// Populate max ram and e820 map info by scanning for a coreboot table. -void -coreboot_preinit(void) -{ - if (!CONFIG_COREBOOT) - return; - - dprintf(3, "Attempting to find coreboot table\n"); - - // Find coreboot table. - struct cb_header *cbh = find_cb_table(); - if (!cbh) - goto fail; - dprintf(3, "Now attempting to find coreboot memory map\n"); - struct cb_memory *cbm = CBMemTable = find_cb_subtable(cbh, CB_TAG_MEMORY); - if (!cbm) - goto fail; - - int i, count = MEM_RANGE_COUNT(cbm); - for (i=0; i<count; i++) { - struct cb_memory_range *m = &cbm->map[i]; - u32 type = m->type; - if (type == CB_MEM_TABLE) - type = E820_RESERVED; - e820_add(m->start, m->size, type); - } - - // Ughh - coreboot likes to set a map at 0x0000-0x1000, but this - // confuses grub. So, override it. - e820_add(0, 16*1024, E820_RAM); - - struct cb_cbmem_ref *cbref = find_cb_subtable(cbh, CB_TAG_CBMEM_CONSOLE); - if (cbref) { - cbcon = (void*)(u32)cbref->cbmem_addr; - debug_banner(); - dprintf(1, "Found coreboot cbmem console @ %llx\n", cbref->cbmem_addr); - } - - struct cb_mainboard *cbmb = find_cb_subtable(cbh, CB_TAG_MAINBOARD); - if (cbmb) { - CBvendor = &cbmb->strings[cbmb->vendor_idx]; - CBpart = &cbmb->strings[cbmb->part_idx]; - dprintf(1, "Found mainboard %s %s\n", CBvendor, CBpart); - } - - return; - -fail: - // No table found.. Use 16Megs as a dummy value. - dprintf(1, "Unable to find coreboot table!\n"); - e820_add(0, 16*1024*1024, E820_RAM); - return; -} - -void coreboot_debug_putc(char c) -{ - if (!CONFIG_DEBUG_COREBOOT) - return; - if (!cbcon) - return; - u32 cursor = cbcon->cursor & CBMC_CURSOR_MASK; - u32 flags = cbcon->cursor & ~CBMC_CURSOR_MASK; - if (cursor >= cbcon->size) - return; // Old coreboot version with legacy overflow mechanism. - cbcon->body[cursor++] = c; - if (cursor >= cbcon->size) { - cursor = 0; - flags |= CBMC_OVERFLOW; - } - cbcon->cursor = flags | cursor; -} - -/**************************************************************** - * BIOS table copying - ****************************************************************/ - -// Attempt to find (and relocate) any standard bios tables found in a -// given address range. -static void -scan_tables(u32 start, u32 size) -{ - void *p = (void*)ALIGN(start, 16); - void *end = (void*)start + size; - for (; p<end; p += 16) - copy_table(p); -} - -void -coreboot_platform_setup(void) -{ - if (!CONFIG_COREBOOT) - return; - pci_probe_devices(); - - struct cb_memory *cbm = CBMemTable; - if (!cbm) - return; - - dprintf(3, "Relocating coreboot bios tables\n"); - - // Scan CB_MEM_TABLE areas for bios tables. - int i, count = MEM_RANGE_COUNT(cbm); - for (i=0; i<count; i++) { - struct cb_memory_range *m = &cbm->map[i]; - if (m->type == CB_MEM_TABLE) - scan_tables(m->start, m->size); - } - - find_acpi_features(); -} - - -/**************************************************************** - * ulzma - ****************************************************************/ - -// Uncompress data in flash to an area of memory. -static int -ulzma(u8 *dst, u32 maxlen, const u8 *src, u32 srclen) -{ - dprintf(3, "Uncompressing data %d@%p to %d@%p\n", srclen, src, maxlen, dst); - CLzmaDecoderState state; - int ret = LzmaDecodeProperties(&state.Properties, src, LZMA_PROPERTIES_SIZE); - if (ret != LZMA_RESULT_OK) { - dprintf(1, "LzmaDecodeProperties error - %d\n", ret); - return -1; - } - u8 scratch[15980]; - int need = (LzmaGetNumProbs(&state.Properties) * sizeof(CProb)); - if (need > sizeof(scratch)) { - dprintf(1, "LzmaDecode need %d have %d\n", need, (unsigned int)sizeof(scratch)); - return -1; - } - state.Probs = (CProb *)scratch; - - u32 dstlen = *(u32*)(src + LZMA_PROPERTIES_SIZE); - if (dstlen > maxlen) { - dprintf(1, "LzmaDecode too large (max %d need %d)\n", maxlen, dstlen); - return -1; - } - u32 inProcessed, outProcessed; - ret = LzmaDecode(&state, src + LZMA_PROPERTIES_SIZE + 8, srclen - , &inProcessed, dst, dstlen, &outProcessed); - if (ret) { - dprintf(1, "LzmaDecode returned %d\n", ret); - return -1; - } - return dstlen; -} - - -/**************************************************************** - * Coreboot flash format - ****************************************************************/ - -#define CBFS_HEADER_MAGIC 0x4F524243 -#define CBFS_VERSION1 0x31313131 - -struct cbfs_header { - u32 magic; - u32 version; - u32 romsize; - u32 bootblocksize; - u32 align; - u32 offset; - u32 pad[2]; -} PACKED; - -#define CBFS_FILE_MAGIC 0x455649484352414cLL // LARCHIVE - -struct cbfs_file { - u64 magic; - u32 len; - u32 type; - u32 checksum; - u32 offset; - char filename[0]; -} PACKED; - -struct cbfs_romfile_s { - struct romfile_s file; - struct cbfs_file *fhdr; - void *data; - u32 rawsize, flags; -}; - -// Copy a file to memory (uncompressing if necessary) -static int -cbfs_copyfile(struct romfile_s *file, void *dst, u32 maxlen) -{ - if (!CONFIG_COREBOOT_FLASH) - return -1; - - struct cbfs_romfile_s *cfile; - cfile = container_of(file, struct cbfs_romfile_s, file); - u32 size = cfile->rawsize; - void *src = cfile->data; - if (cfile->flags) { - // Compressed - copy to temp ram and uncompress it. - void *temp = malloc_tmphigh(size); - if (!temp) { - warn_noalloc(); - return -1; - } - iomemcpy(temp, src, size); - int ret = ulzma(dst, maxlen, temp, size); - yield(); - free(temp); - return ret; - } - - // Not compressed. - dprintf(3, "Copying data %d@%p to %d@%p\n", size, src, maxlen, dst); - if (size > maxlen) { - warn_noalloc(); - return -1; - } - iomemcpy(dst, src, size); - return size; -} - -// Process CBFS links file. The links file is a newline separated -// file where each line has a "link name" and a "destination name" -// separated by a space character. -static void -process_links_file(void) -{ - char *links = romfile_loadfile("links", NULL), *next = links; - while (next) { - // Parse out linkname and destname - char *linkname = next; - next = strchr(linkname, '\n'); - if (next) - *next++ = '\0'; - char *comment = strchr(linkname, '#'); - if (comment) - *comment = '\0'; - linkname = nullTrailingSpace(linkname); - char *destname = strchr(linkname, ' '); - if (!destname) - continue; - *destname++ = '\0'; - destname = nullTrailingSpace(destname); - // Lookup destname and create new romfile entry for linkname - struct romfile_s *ufile = romfile_find(destname); - if (!ufile) - continue; - struct cbfs_romfile_s *cufile - = container_of(ufile, struct cbfs_romfile_s, file); - struct cbfs_romfile_s *cfile = malloc_tmp(sizeof(*cfile)); - if (!cfile) { - warn_noalloc(); - break; - } - memcpy(cfile, cufile, sizeof(*cfile)); - strtcpy(cfile->file.name, linkname, sizeof(cfile->file.name)); - romfile_add(&cfile->file); - } - free(links); -} - -void -coreboot_cbfs_init(void) -{ - if (!CONFIG_COREBOOT_FLASH) - return; - - struct cbfs_header *hdr = *(void **)(CONFIG_CBFS_LOCATION - 4); - if ((u32)hdr & 0x03) { - dprintf(1, "Invalid CBFS pointer %p\n", hdr); - return; - } - if (CONFIG_CBFS_LOCATION && (u32)hdr > CONFIG_CBFS_LOCATION) - // Looks like the pointer is relative to CONFIG_CBFS_LOCATION - hdr = (void*)hdr + CONFIG_CBFS_LOCATION; - if (hdr->magic != cpu_to_be32(CBFS_HEADER_MAGIC)) { - dprintf(1, "Unable to find CBFS (ptr=%p; got %x not %x)\n" - , hdr, hdr->magic, cpu_to_be32(CBFS_HEADER_MAGIC)); - return; - } - dprintf(1, "Found CBFS header at %p\n", hdr); - - u32 romsize = be32_to_cpu(hdr->romsize); - u32 romstart = CONFIG_CBFS_LOCATION - romsize; - struct cbfs_file *fhdr = (void*)romstart + be32_to_cpu(hdr->offset); - for (;;) { - if ((u32)fhdr - romstart > romsize) - break; - u64 magic = fhdr->magic; - if (magic != CBFS_FILE_MAGIC) - break; - struct cbfs_romfile_s *cfile = malloc_tmp(sizeof(*cfile)); - if (!cfile) { - warn_noalloc(); - break; - } - memset(cfile, 0, sizeof(*cfile)); - strtcpy(cfile->file.name, fhdr->filename, sizeof(cfile->file.name)); - cfile->file.size = cfile->rawsize = be32_to_cpu(fhdr->len); - cfile->fhdr = fhdr; - cfile->file.copy = cbfs_copyfile; - cfile->data = (void*)fhdr + be32_to_cpu(fhdr->offset); - int len = strlen(cfile->file.name); - if (len > 5 && strcmp(&cfile->file.name[len-5], ".lzma") == 0) { - // Using compression. - cfile->flags = 1; - cfile->file.name[len-5] = '\0'; - cfile->file.size = *(u32*)(cfile->data + LZMA_PROPERTIES_SIZE); - } - romfile_add(&cfile->file); - - fhdr = (void*)ALIGN((u32)cfile->data + cfile->rawsize - , be32_to_cpu(hdr->align)); - } - - process_links_file(); -} - -struct cbfs_payload_segment { - u32 type; - u32 compression; - u32 offset; - u64 load_addr; - u32 len; - u32 mem_len; -} PACKED; - -#define PAYLOAD_SEGMENT_BSS 0x20535342 -#define PAYLOAD_SEGMENT_ENTRY 0x52544E45 - -#define CBFS_COMPRESS_NONE 0 -#define CBFS_COMPRESS_LZMA 1 - -struct cbfs_payload { - struct cbfs_payload_segment segments[1]; -}; - -void -cbfs_run_payload(struct cbfs_file *fhdr) -{ - if (!CONFIG_COREBOOT_FLASH || !fhdr) - return; - dprintf(1, "Run %s\n", fhdr->filename); - struct cbfs_payload *pay = (void*)fhdr + be32_to_cpu(fhdr->offset); - struct cbfs_payload_segment *seg = pay->segments; - for (;;) { - void *src = (void*)pay + be32_to_cpu(seg->offset); - void *dest = (void*)(u32)be64_to_cpu(seg->load_addr); - u32 src_len = be32_to_cpu(seg->len); - u32 dest_len = be32_to_cpu(seg->mem_len); - switch (seg->type) { - case PAYLOAD_SEGMENT_BSS: - dprintf(3, "BSS segment %d@%p\n", dest_len, dest); - memset(dest, 0, dest_len); - break; - case PAYLOAD_SEGMENT_ENTRY: { - dprintf(1, "Calling addr %p\n", dest); - void (*func)(void) = dest; - func(); - return; - } - default: - dprintf(3, "Segment %x %d@%p -> %d@%p\n" - , seg->type, src_len, src, dest_len, dest); - if (seg->compression == cpu_to_be32(CBFS_COMPRESS_NONE)) { - if (src_len > dest_len) - src_len = dest_len; - memcpy(dest, src, src_len); - } else if (CONFIG_LZMA - && seg->compression == cpu_to_be32(CBFS_COMPRESS_LZMA)) { - int ret = ulzma(dest, dest_len, src, src_len); - if (ret < 0) - return; - src_len = ret; - } else { - dprintf(1, "No support for compression type %x\n" - , seg->compression); - return; - } - if (dest_len > src_len) - memset(dest + src_len, 0, dest_len - src_len); - break; - } - seg++; - } -} - -// Register payloads in "img/" directory with boot system. -void -cbfs_payload_setup(void) -{ - if (!CONFIG_COREBOOT_FLASH) - return; - struct romfile_s *file = NULL; - for (;;) { - file = romfile_findprefix("img/", file); - if (!file) - break; - struct cbfs_romfile_s *cfile; - cfile = container_of(file, struct cbfs_romfile_s, file); - const char *filename = file->name; - char *desc = znprintf(MAXDESCSIZE, "Payload [%s]", &filename[4]); - boot_add_cbfs(cfile->fhdr, desc, bootprio_find_named_rom(filename, 0)); - } -} diff --git a/payloads/external/SeaBIOS/src/fw/csm.c b/payloads/external/SeaBIOS/src/fw/csm.c deleted file mode 100644 index 8359bcba..00000000 --- a/payloads/external/SeaBIOS/src/fw/csm.c +++ /dev/null @@ -1,374 +0,0 @@ -// Compatibility Support Module (CSM) for UEFI / EDK-II -// -// Copyright © 2013 Intel Corporation -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "bregs.h" // struct bregs -#include "config.h" // CONFIG_* -#include "e820map.h" // e820_add -#include "farptr.h" // MAKE_FLATPTR -#include "hw/pci.h" // pci_to_bdf -#include "hw/pcidevice.h" // pci_probe_devices -#include "hw/pic.h" // pic_irqmask_read -#include "malloc.h" // malloc_csm_preinit -#include "memmap.h" // SYMBOL -#include "output.h" // dprintf -#include "paravirt.h" // qemu_preinit -#include "stacks.h" // wait_threads -#include "std/acpi.h" // RSDP_SIGNATURE -#include "std/bda.h" // struct bios_data_area_s -#include "std/optionrom.h" // struct rom_header -#include "util.h" // copy_smbios - -#define UINT8 u8 -#define UINT16 u16 -#define UINT32 u32 -#include "std/LegacyBios.h" - -struct rsdp_descriptor csm_rsdp VARFSEG __aligned(16); - -EFI_COMPATIBILITY16_TABLE csm_compat_table VARFSEG __aligned(16) = { - .Signature = 0x24454649, - .TableChecksum = 0 /* Filled in by checkrom.py */, - .TableLength = sizeof(csm_compat_table), - .Compatibility16CallSegment = SEG_BIOS, - .Compatibility16CallOffset = 0 /* Filled in by checkrom.py */, - .OemIdStringPointer = (u32)"SeaBIOS", - .AcpiRsdPtrPointer = (u32)&csm_rsdp, -}; - -EFI_TO_COMPATIBILITY16_INIT_TABLE *csm_init_table; -EFI_TO_COMPATIBILITY16_BOOT_TABLE *csm_boot_table; - -static u16 PICMask = PIC_IRQMASK_DEFAULT; - -extern void __csm_return(struct bregs *regs) __noreturn; - -static void -csm_return(struct bregs *regs) -{ - u32 rommax = rom_get_max(); - - dprintf(3, "handle_csm returning AX=%04x\n", regs->ax); - - csm_compat_table.UmaAddress = rommax; - csm_compat_table.UmaSize = SYMBOL(final_readonly_start) - rommax; - - PICMask = pic_irqmask_read(); - __csm_return(regs); -} - -static void -csm_maininit(struct bregs *regs) -{ - interface_init(); - pci_probe_devices(); - - csm_compat_table.PnPInstallationCheckSegment = SEG_BIOS; - csm_compat_table.PnPInstallationCheckOffset = get_pnp_offset(); - - regs->ax = 0; - - csm_return(regs); -} - -/* Legacy16InitializeYourself */ -static void -handle_csm_0000(struct bregs *regs) -{ - qemu_preinit(); - - dprintf(3, "Legacy16InitializeYourself table %04x:%04x\n", regs->es, - regs->bx); - - csm_init_table = MAKE_FLATPTR(regs->es, regs->bx); - - dprintf(3, "BiosLessThan1MB %08x\n", csm_init_table->BiosLessThan1MB); - dprintf(3, "HiPmmMemory %08x\n", csm_init_table->HiPmmMemory); - dprintf(3, "HiPmmMemorySize %08x\n", csm_init_table->HiPmmMemorySizeInBytes); - dprintf(3, "ReverseThunk %04x:%04x\n", csm_init_table->ReverseThunkCallSegment, - csm_init_table->ReverseThunkCallOffset); - dprintf(3, "NumE820Entries %08x\n", csm_init_table->NumberE820Entries); - dprintf(3, "OsMemoryAbove1M %08x\n", csm_init_table->OsMemoryAbove1Mb); - dprintf(3, "ThunkStart %08x\n", csm_init_table->ThunkStart); - dprintf(3, "ThunkSize %08x\n", csm_init_table->ThunkSizeInBytes); - dprintf(3, "LoPmmMemory %08x\n", csm_init_table->LowPmmMemory); - dprintf(3, "LoPmmMemorySize %08x\n", csm_init_table->LowPmmMemorySizeInBytes); - - malloc_csm_preinit(csm_init_table->LowPmmMemory, - csm_init_table->LowPmmMemorySizeInBytes, - csm_init_table->HiPmmMemory, - csm_init_table->HiPmmMemorySizeInBytes); - reloc_preinit(csm_maininit, regs); -} - -/* Legacy16UpdateBbs */ -static void -handle_csm_0001(struct bregs *regs) -{ - if (!CONFIG_BOOT) { - regs->ax = 1; - return; - } - - dprintf(3, "Legacy16UpdateBbs table %04x:%04x\n", regs->es, regs->bx); - - csm_boot_table = MAKE_FLATPTR(regs->es, regs->bx); - dprintf(3, "MajorVersion %04x\n", csm_boot_table->MajorVersion); - dprintf(3, "MinorVersion %04x\n", csm_boot_table->MinorVersion); - dprintf(3, "AcpiTable %08x\n", csm_boot_table->AcpiTable); - dprintf(3, "SmbiosTable %08x\n", csm_boot_table->SmbiosTable); - dprintf(3, "SmbiosTableLength %08x\n", csm_boot_table->SmbiosTableLength); -// dprintf(3, "SioData %08x\n", csm_boot_table->SioData); - dprintf(3, "DevicePathType %04x\n", csm_boot_table->DevicePathType); - dprintf(3, "PciIrqMask %04x\n", csm_boot_table->PciIrqMask); - dprintf(3, "NumberE820Entries %08x\n", csm_boot_table->NumberE820Entries); -// dprintf(3, "HddInfo %08x\n", csm_boot_table->HddInfo); - dprintf(3, "NumberBbsEntries %08x\n", csm_boot_table->NumberBbsEntries); - dprintf(3, "BBsTable %08x\n", csm_boot_table->BbsTable); - dprintf(3, "SmmTable %08x\n", csm_boot_table->SmmTable); - dprintf(3, "OsMemoryAbove1Mb %08x\n", csm_boot_table->OsMemoryAbove1Mb); - dprintf(3, "UnconventionalDeviceTable %08x\n", csm_boot_table->UnconventionalDeviceTable); - - regs->ax = 0; -} - -/* PrepareToBoot */ -static void -handle_csm_0002(struct bregs *regs) -{ - if (!CONFIG_BOOT) { - regs->ax = 1; - return; - } - - dprintf(3, "PrepareToBoot table %04x:%04x\n", regs->es, regs->bx); - - struct e820entry *p = (void *)csm_compat_table.E820Pointer; - int i; - for (i=0; i < csm_compat_table.E820Length / sizeof(struct e820entry); i++) - e820_add(p[i].start, p[i].size, p[i].type); - - if (csm_init_table->HiPmmMemorySizeInBytes > BUILD_MAX_HIGHTABLE) { - u32 hi_pmm_end = csm_init_table->HiPmmMemory + csm_init_table->HiPmmMemorySizeInBytes; - e820_add(hi_pmm_end - BUILD_MAX_HIGHTABLE, BUILD_MAX_HIGHTABLE, E820_RESERVED); - } - - // For PCIBIOS 1ab10e - if (csm_compat_table.IrqRoutingTablePointer && - csm_compat_table.IrqRoutingTableLength) { - PirAddr = (void *)csm_compat_table.IrqRoutingTablePointer; - dprintf(3, "CSM PIRQ table at %p\n", PirAddr); - } - - // For find_resume_vector()... and find_acpi_features() - if (csm_rsdp.signature == RSDP_SIGNATURE) { - RsdpAddr = &csm_rsdp; - dprintf(3, "CSM ACPI RSDP at %p\n", RsdpAddr); - - find_acpi_features(); - } - - // SMBIOS table needs to be copied into the f-seg - // XX: OVMF doesn't seem to set SmbiosTableLength so don't check it - if (csm_boot_table->SmbiosTable && !SMBiosAddr) - copy_smbios((void *)csm_boot_table->SmbiosTable); - - // MPTABLE is just there; we don't care where. - - // EFI may have reinitialised the video using its *own* driver. - enable_vga_console(); - - // EFI fills this in for us. Zero it for now... - struct bios_data_area_s *bda = MAKE_FLATPTR(SEG_BDA, 0); - bda->hdcount = 0; - - thread_setup(); - mathcp_setup(); - timer_setup(); - clock_setup(); - device_hardware_setup(); - wait_threads(); - interactive_bootmenu(); - - prepareboot(); - - regs->ax = 0; -} - -/* Boot */ -static void -handle_csm_0003(struct bregs *regs) -{ - if (!CONFIG_BOOT) { - regs->ax = 1; - return; - } - - dprintf(3, "Boot\n"); - - startBoot(); - - regs->ax = 1; -} - -/* Legacy16DispatchOprom */ -static void -handle_csm_0005(struct bregs *regs) -{ - EFI_DISPATCH_OPROM_TABLE *table = MAKE_FLATPTR(regs->es, regs->bx); - struct rom_header *rom; - u16 bdf; - - if (!CONFIG_OPTIONROMS) { - regs->ax = 1; - return; - } - - dprintf(3, "Legacy16DispatchOprom rom %p\n", table); - - dprintf(3, "OpromSegment %04x\n", table->OpromSegment); - dprintf(3, "RuntimeSegment %04x\n", table->RuntimeSegment); - dprintf(3, "PnPInstallationCheck %04x:%04x\n", - table->PnPInstallationCheckSegment, - table->PnPInstallationCheckOffset); - dprintf(3, "RuntimeSegment %04x\n", table->RuntimeSegment); - - rom = MAKE_FLATPTR(table->OpromSegment, 0); - bdf = pci_bus_devfn_to_bdf(table->PciBus, table->PciDeviceFunction); - - rom_reserve(rom->size * 512); - - // XX PnP seg/ofs should never be other than default - callrom(rom, bdf); - - rom_confirm(rom->size * 512); - - regs->bx = 0; // FIXME - regs->ax = 0; -} - -/* Legacy16GetTableAddress */ -static void -handle_csm_0006(struct bregs *regs) -{ - u16 size = regs->cx; - u16 align = regs->dx; - u16 region = regs->bx; // (1 for F000 seg, 2 for E000 seg, 0 for either) - void *chunk = NULL; - - dprintf(3, "Legacy16GetTableAddress size %x align %x region %d\n", - size, align, region); - - if (!region) - region = 3; - - // DX = Required address alignment. Bit mapped. - // First non-zero bit from the right is the alignment.*/ - if (align) { - align = 1 << __ffs(align); - if (align < MALLOC_MIN_ALIGN) - align = MALLOC_MIN_ALIGN; - } else { - align = MALLOC_MIN_ALIGN; - } - - if (region & 2) - chunk = _malloc(&ZoneLow, size, align); - if (!chunk && (region & 1)) - chunk = _malloc(&ZoneFSeg, size, align); - - dprintf(3, "Legacy16GetTableAddress size %x align %x region %d yields %p\n", - size, align, region, chunk); - if (chunk) { - regs->ds = FLATPTR_TO_SEG(chunk); - regs->bx = FLATPTR_TO_OFFSET(chunk); - regs->ax = 0; - } else { - regs->ax = 1; - } -} - -void VISIBLE32INIT -handle_csm(struct bregs *regs) -{ - ASSERT32FLAT(); - - if (!CONFIG_CSM) - return; - - dprintf(3, "handle_csm regs %p AX=%04x\n", regs, regs->ax); - - code_mutable_preinit(); - pic_irqmask_write(PICMask); - - switch(regs->ax) { - case 0000: handle_csm_0000(regs); break; - case 0001: handle_csm_0001(regs); break; - case 0002: handle_csm_0002(regs); break; - case 0003: handle_csm_0003(regs); break; -// case 0004: handle_csm_0004(regs); break; - case 0005: handle_csm_0005(regs); break; - case 0006: handle_csm_0006(regs); break; -// case 0007: handle_csm_0007(regs); break; -// case 0008: hamdle_csm_0008(regs); break; - default: regs->al = 1; - } - - csm_return(regs); -} - -static int csm_prio_to_seabios(u16 csm_prio) -{ - switch (csm_prio) { - case BBS_DO_NOT_BOOT_FROM: - case BBS_IGNORE_ENTRY: - return -1; - - case BBS_LOWEST_PRIORITY: - case BBS_UNPRIORITIZED_ENTRY: - default: - // SeaBIOS default priorities start at 1, with 0 being used for - // an item explicitly selected from interactive_bootmenu(). - // As in find_prio(), add 1 to the value being returned. - return csm_prio + 1; - } -} - -int csm_bootprio_ata(struct pci_device *pci, int chanid, int slave) -{ - if (!csm_boot_table) - return -1; - BBS_TABLE *bbs = (void *)csm_boot_table->BbsTable; - int index = 1 + (chanid * 2) + slave; - dprintf(3, "CSM bootprio for ATA%d,%d (index %d) is %d\n", chanid, slave, - index, bbs[index].BootPriority); - return csm_prio_to_seabios(bbs[index].BootPriority); -} - -int csm_bootprio_fdc(struct pci_device *pci, int port, int fdid) -{ - if (!csm_boot_table) - return -1; - BBS_TABLE *bbs = (void *)csm_boot_table->BbsTable; - dprintf(3, "CSM bootprio for FDC is %d\n", bbs[0].BootPriority); - return csm_prio_to_seabios(bbs[0].BootPriority); -} - -int csm_bootprio_pci(struct pci_device *pci) -{ - if (!csm_boot_table) - return -1; - BBS_TABLE *bbs = (void *)csm_boot_table->BbsTable; - int i; - - for (i = 5; i < csm_boot_table->NumberBbsEntries; i++) { - if (pci->bdf == pci_to_bdf(bbs[i].Bus, bbs[i].Device, bbs[i].Function)) { - dprintf(3, "CSM bootprio for PCI(%d,%d,%d) is %d\n", bbs[i].Bus, - bbs[i].Device, bbs[i].Function, bbs[i].BootPriority); - return csm_prio_to_seabios(bbs[i].BootPriority); - } - } - return -1; -} diff --git a/payloads/external/SeaBIOS/src/fw/dev-pci.h b/payloads/external/SeaBIOS/src/fw/dev-pci.h deleted file mode 100644 index 30bb25a3..00000000 --- a/payloads/external/SeaBIOS/src/fw/dev-pci.h +++ /dev/null @@ -1,52 +0,0 @@ -#ifndef _PCI_CAP_H -#define _PCI_CAP_H - -#include "types.h" - -/* - * - * QEMU-specific vendor(Red Hat)-specific capability. - * It's intended to provide some hints for firmware to init PCI devices. - * - * Its structure is shown below: - * - * Header: - * - * u8 id; Standard PCI Capability Header field - * u8 next; Standard PCI Capability Header field - * u8 len; Standard PCI Capability Header field - * u8 type; Red Hat vendor-specific capability type - * Data: - * - * u32 bus_res; minimum bus number to reserve; - * this is necessary for PCI Express Root Ports - * to support PCI bridges hotplug - * u64 io; IO space to reserve - * u32 mem; non-prefetchable memory to reserve - * - * At most of the following two fields may be set to a value - * different from 0xFF...F: - * u32 prefetchable_mem_32; prefetchable memory to reserve (32-bit MMIO) - * u64 prefetchable_mem_64; prefetchable memory to reserve (64-bit MMIO) - * - * If any field value in Data section is 0xFF...F, - * it means that such kind of reservation is not needed and must be ignored. - * -*/ - -/* Offset of vendor-specific capability type field */ -#define PCI_CAP_REDHAT_TYPE_OFFSET 3 - -/* List of valid Red Hat vendor-specific capability types */ -#define REDHAT_CAP_RESOURCE_RESERVE 1 - - -/* Offsets of RESOURCE_RESERVE capability fields */ -#define RES_RESERVE_BUS_RES 4 -#define RES_RESERVE_IO 8 -#define RES_RESERVE_MEM 16 -#define RES_RESERVE_PREF_MEM_32 20 -#define RES_RESERVE_PREF_MEM_64 24 -#define RES_RESERVE_CAP_SIZE 32 - -#endif /* _PCI_CAP_H */ diff --git a/payloads/external/SeaBIOS/src/fw/dev-piix.h b/payloads/external/SeaBIOS/src/fw/dev-piix.h deleted file mode 100644 index c389f171..00000000 --- a/payloads/external/SeaBIOS/src/fw/dev-piix.h +++ /dev/null @@ -1,29 +0,0 @@ -#ifndef __DEV_PIIX_H -#define __DEV_PIIX_H - -#define I440FX_PAM0 0x59 -#define I440FX_SMRAM 0x72 - -#define PIIX_PMBASE 0x40 -#define PIIX_PMREGMISC 0x80 -#define PIIX_SMBHSTBASE 0x90 -#define PIIX_SMBHSTCFG 0xd2 -#define PIIX_DEVACTB 0x58 -#define PIIX_DEVACTB_APMC_EN (1 << 25) - -#define PIIX_PORT_ELCR1 0x4d0 -#define PIIX_PORT_ELCR2 0x4d1 - -/* ICH9 PM I/O registers */ -#define PIIX_GPE0_BLK 0xafe0 -#define PIIX_GPE0_BLK_LEN 4 -#define PIIX_PMIO_GLBCTL 0x28 -#define PIIX_PMIO_GLBCTL_SMI_EN 1 - -/* FADT ACPI_ENABLE/ACPI_DISABLE */ -#define PIIX_ACPI_ENABLE 0xf1 -#define PIIX_ACPI_DISABLE 0xf0 - -#define PIIX_PM_INTRRUPT 9 // irq 9 - -#endif // dev-piix.h diff --git a/payloads/external/SeaBIOS/src/fw/dev-q35.h b/payloads/external/SeaBIOS/src/fw/dev-q35.h deleted file mode 100644 index 201825de..00000000 --- a/payloads/external/SeaBIOS/src/fw/dev-q35.h +++ /dev/null @@ -1,52 +0,0 @@ -#ifndef __DEV_Q35_H -#define __DEV_Q35_H - -#include "types.h" // u16 - -#define PCI_DEVICE_ID_INTEL_Q35_MCH 0x29c0 -#define Q35_HOST_BRIDGE_PAM0 0x90 -#define Q35_HOST_BRIDGE_SMRAM 0x9d -#define Q35_HOST_BRIDGE_PCIEXBAR 0x60 -#define Q35_HOST_BRIDGE_PCIEXBAR_SIZE (256 * 1024 * 1024) -#define Q35_HOST_BRIDGE_PCIEXBAR_ADDR 0xb0000000 -#define Q35_HOST_BRIDGE_PCIEXBAREN ((u64)1) -#define Q35_HOST_PCIE_PCI_SEGMENT 0 -#define Q35_HOST_PCIE_START_BUS_NUMBER 0 -#define Q35_HOST_PCIE_END_BUS_NUMBER 255 - -#define PCI_DEVICE_ID_INTEL_ICH9_LPC 0x2918 -#define ICH9_LPC_PMBASE 0x40 -#define ICH9_LPC_PMBASE_RTE 0x1 - -#define ICH9_LPC_ACPI_CTRL 0x44 -#define ICH9_LPC_ACPI_CTRL_ACPI_EN 0x80 -#define ICH9_LPC_PIRQA_ROUT 0x60 -#define ICH9_LPC_PIRQE_ROUT 0x68 -#define ICH9_LPC_PIRQ_ROUT_IRQEN 0x80 -#define ICH9_LPC_GEN_PMCON_1 0xa0 -#define ICH9_LPC_GEN_PMCON_1_SMI_LOCK (1 << 4) -#define ICH9_LPC_PORT_ELCR1 0x4d0 -#define ICH9_LPC_PORT_ELCR2 0x4d1 -#define ICH9_LPC_RCBA 0xf0 -#define ICH9_LPC_RCBA_ADDR 0xfed1c000 -#define ICH9_LPC_RCBA_EN 0x1 -#define PCI_DEVICE_ID_INTEL_ICH9_SMBUS 0x2930 -#define ICH9_SMB_SMB_BASE 0x20 -#define ICH9_SMB_HOSTC 0x40 -#define ICH9_SMB_HOSTC_HST_EN 0x01 - -#define ICH9_ACPI_ENABLE 0x2 -#define ICH9_ACPI_DISABLE 0x3 - -/* ICH9 LPC PM I/O registers are 128 ports and 128-aligned */ -#define ICH9_PMIO_GPE0_STS 0x20 -#define ICH9_PMIO_GPE0_BLK_LEN 0x10 -#define ICH9_PMIO_SMI_EN 0x30 -#define ICH9_PMIO_SMI_EN_APMC_EN (1 << 5) -#define ICH9_PMIO_SMI_EN_GLB_SMI_EN (1 << 0) - -/* FADT ACPI_ENABLE/ACPI_DISABLE */ -#define ICH9_APM_ACPI_ENABLE 0x2 -#define ICH9_APM_ACPI_DISABLE 0x3 - -#endif // dev-q35.h diff --git a/payloads/external/SeaBIOS/src/fw/dsdt_parser.c b/payloads/external/SeaBIOS/src/fw/dsdt_parser.c deleted file mode 100644 index eb5496f3..00000000 --- a/payloads/external/SeaBIOS/src/fw/dsdt_parser.c +++ /dev/null @@ -1,673 +0,0 @@ -// Support for parsing dsdt acpi tables -// -// Copyright (C) 2008,2009 Kevin O'Connor <kevin@koconnor.net> -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "config.h" // CONFIG_* -#include "list.h" // hlist_* -#include "malloc.h" // malloc_* -#include "output.h" // dprintf -#include "string.h" // memcpy -#include "util.h" -#include "std/acpi.h" // struct rsdp_descriptor - -/**************************************************************** - * DSDT parser - ****************************************************************/ - -struct acpi_device { - struct hlist_node node; - char name[16]; - u8 *hid_aml; - u8 *sta_aml; - u8 *crs_data; - int crs_size; -}; -static struct hlist_head acpi_devices VARVERIFY32INIT; -static const int parse_dumpdevs = 0; - -struct parse_state { - char name[32]; - struct acpi_device *dev; - int error; - int depth; -}; - -static void parse_termlist(struct parse_state *s, - u8 *ptr, int offset, int pkglength); - -static void hex(const u8 *ptr, int count, int lvl, const char *item) -{ - int l = 0, i; - - do { - dprintf(lvl, "%s: %04x: ", item, l); - for (i = l; i < l+16; i += 4) - dprintf(lvl, "%02x %02x %02x %02x ", - ptr[i+0], ptr[i+1], ptr[i+2], ptr[i+3]); - for (i = l; i < l+16; i++) - dprintf(lvl, "%c", (ptr[i] > 0x20 && ptr[i] < 0x80) - ? ptr[i] : '.'); - dprintf(lvl, "\n"); - l += 16; - } while (l < count); -} - -static u64 parse_resource_int(u8 *ptr, int count) -{ - u64 value = 0; - int index = 0; - - for (index = 0; index < count; index++) - value |= (u64)ptr[index] << (index * 8); - return value; -} - -static int parse_resource_bit(u8 *ptr, int count) -{ - int bit; - - for (bit = 0; bit < count*8; bit++) - if (ptr[bit/8] & (1 << (bit%8))) - return bit; - return 0; -} - -static int parse_resource(u8 *ptr, int length, int *type, u64 *min, u64 *max) -{ - int rname, rsize; - u64 len; - - *type = -1; - *min = 0; - *max = 0; - len = 0; - if (!(ptr[0] & 0x80)) { - /* small resource */ - rname = (ptr[0] >> 3) & 0x0f; - rsize = ptr[0] & 0x07; - rsize++; - switch (rname) { - case 0x04: /* irq */ - *min = parse_resource_bit(ptr + 1, rsize); - *max = *min; - *type = 3; - break; - case 0x0f: /* end marker */ - return 0; - case 0x08: /* io */ - *min = parse_resource_int(ptr + 2, 2); - *max = parse_resource_int(ptr + 4, 2); - if (*min == *max) { - *max = *min + ptr[7] - 1; - *type = 1; - } - break; - case 0x09: /* fixed io */ - *min = parse_resource_int(ptr + 2, 2); - *max = *min + ptr[4] - 1; - *type = 1; - break; - default: - dprintf(3, "%s: small: 0x%x (len %d)\n", - __func__, rname, rsize); - break; - } - } else { - /* large resource */ - rname = ptr[0] & 0x7f; - rsize = ptr[2] << 8 | ptr[1]; - rsize += 3; - switch (rname) { - case 0x06: /* 32-bit Fixed Location Memory Range Descriptor */ - *min = parse_resource_int(ptr + 4, 4); - len = parse_resource_int(ptr + 8, 4); - *max = *min + len - 1; - *type = 0; - break; - case 0x07: /* DWORD Address Space Descriptor */ - *min = parse_resource_int(ptr + 10, 4); - *max = parse_resource_int(ptr + 14, 4); - *type = ptr[3]; - break; - case 0x08: /* WORD Address Space Descriptor */ - *min = parse_resource_int(ptr + 8, 2); - *max = parse_resource_int(ptr + 10, 2); - *type = ptr[3]; - break; - case 0x09: /* irq */ - *min = parse_resource_int(ptr + 5, 4); - *max = *min; - *type = 3; - break; - case 0x0a: /* QWORD Address Space Descriptor */ - *min = parse_resource_int(ptr + 14, 8); - *max = parse_resource_int(ptr + 22, 8); - *type = ptr[3]; - break; - default: - dprintf(3, "%s: large: 0x%x (len %d)\n", __func__, rname, rsize); - break; - } - } - return rsize; -} - -static int find_resource(u8 *ptr, int len, int kind, u64 *min, u64 *max) -{ - int type, size, offset = 0; - - do { - size = parse_resource(ptr + offset, len - offset, - &type, min, max); - if (kind == type) - return 0; - offset += size; - } while (size > 0 && offset < len); - return -1; -} - -static int print_resources(const char *prefix, u8 *ptr, int len) -{ - static const char *typename[] = { "mem", "i/o", "bus" }; - int type, size, offset = 0; - u64 min, max; - - do { - size = parse_resource(ptr + offset, len - offset, - &type, &min, &max); - switch (type) { - case 0: - case 1: - case 2: - dprintf(1, "%s%s 0x%llx -> 0x%llx\n", - prefix, typename[type], min, max); - break; - case 3: - dprintf(1, "%sirq %lld\n", prefix, min); - break; - } - offset += size; - } while (size > 0 && offset < len); - return -1; -} - -static int parse_nameseg(u8 *ptr, char **dst) -{ - if (dst && *dst) { - *(dst[0]++) = ptr[0]; - if (ptr[1] != '_') - *(dst[0]++) = ptr[1]; - if (ptr[2] != '_') - *(dst[0]++) = ptr[2]; - if (ptr[3] != '_') - *(dst[0]++) = ptr[3]; - *(dst[0]) = 0; - } - return 4; -} - -static int parse_namestring(struct parse_state *s, - u8 *ptr, const char *item) -{ - char *dst = s->name; - int offset = 0; - int i, count; - - for (;;) { - switch (ptr[offset]) { - case 0: /* null name */ - offset++; - *(dst++) = 0; - break; - case 0x2e: - offset++; - offset += parse_nameseg(ptr + offset, &dst); - *(dst++) = '.'; - offset += parse_nameseg(ptr + offset, &dst); - break; - case 0x2f: - offset++; - count = ptr[offset]; - offset++; - for (i = 0; i < count; i++) { - if (i) - *(dst++) = '.'; - offset += parse_nameseg(ptr + offset, &dst); - } - break; - case '\\': - *(dst++) = '\\'; - offset++; - continue; - case '^': - *(dst++) = '^'; - offset++; - continue; - case 'A' ... 'Z': - case '_': - offset += parse_nameseg(ptr, &dst); - break; - default: - hex(ptr, 16, 3, __func__); - s->error = 1; - break; - } - break; - } - dprintf(5, "%s: %d %s '%s'\n", __func__, s->depth, - item, s->name); - return offset; -} - -static int parse_termarg_int(u8 *ptr, int *error, u64 *dst) -{ - u64 value; - int offset = 1; - - switch (ptr[0]) { - case 0x00: /* zero */ - value = 0; - break; - case 0x01: /* one */ - value = 1; - break; - case 0x0a: /* byte prefix */ - value = ptr[1]; - offset++; - break; - case 0x0b: /* word prefix */ - value = ptr[1] | - ((unsigned long)ptr[2] << 8); - offset += 2; - break; - case 0x0c: /* dword prefix */ - value = ptr[1] | - ((unsigned long)ptr[2] << 8) | - ((unsigned long)ptr[3] << 16) | - ((unsigned long)ptr[4] << 24); - offset += 4; - break; - default: - value = 0; - hex(ptr, 16, 3, __func__); - if (error) - *error = 1; - break; - } - - if (dst) - *dst = value; - dprintf(5, "%s: 0x%llx\n", __func__, value); - return offset; -} - -static int parse_pkglength(u8 *ptr, int *pkglength) -{ - int offset = 2; - - *pkglength = 0; - switch (ptr[0] >> 6) { - case 3: - *pkglength |= ptr[3] << 20; - offset++; - case 2: - *pkglength |= ptr[2] << 12; - offset++; - case 1: - *pkglength |= ptr[1] << 4; - *pkglength |= ptr[0] & 0x0f; - return offset; - case 0: - default: - *pkglength |= ptr[0] & 0x3f; - return 1; - } -} - -static int parse_pkg_common(struct parse_state *s, - u8 *ptr, const char *item, int *pkglength) -{ - int offset; - - offset = parse_pkglength(ptr, pkglength); - offset += parse_namestring(s, ptr + offset, item); - return offset; -} - -static int parse_pkg_scope(struct parse_state *s, - u8 *ptr) -{ - int offset, pkglength; - - offset = parse_pkg_common(s, ptr, "scope", &pkglength); - parse_termlist(s, ptr, offset, pkglength); - return pkglength; -} - -static int parse_pkg_device(struct parse_state *s, - u8 *ptr) -{ - int offset, pkglength; - - offset = parse_pkg_common(s, ptr, "device", &pkglength); - - s->dev = malloc_tmp(sizeof(struct acpi_device)); - if (!s->dev) { - warn_noalloc(); - s->error = 1; - return pkglength; - } - - memset(s->dev, 0, sizeof(struct acpi_device)); - hlist_add_head(&s->dev->node, &acpi_devices); - strtcpy(s->dev->name, s->name, sizeof(s->name)); - parse_termlist(s, ptr, offset, pkglength); - s->dev = NULL; - - return pkglength; -} - -static int parse_pkg_buffer(struct parse_state *s, - u8 *ptr) -{ - u64 blen; - int pkglength, offset; - - offset = parse_pkglength(ptr, &pkglength); - offset += parse_termarg_int(ptr + offset, &s->error, &blen); - if (s->dev && strcmp(s->name, "_CRS") == 0) { - s->dev->crs_data = ptr + offset; - s->dev->crs_size = blen; - } - return pkglength; -} - -static int parse_pkg_skip(struct parse_state *s, - u8 *ptr, int op, int name) -{ - int pkglength, offset; - char item[8]; - - snprintf(item, sizeof(item), "op %x", op); - offset = parse_pkglength(ptr, &pkglength); - if (name) { - parse_namestring(s, ptr + offset, item); - } else { - dprintf(5, "%s: %s (%d)\n", __func__, item, pkglength); - } - return pkglength; -} - -static int parse_termobj(struct parse_state *s, - u8 *ptr) -{ - int offset = 1; - - if (s->depth == 16) { - dprintf(1, "%s: deep recursion\n", __func__); - s->error = 1; - return offset; - } - - s->depth++; - switch (ptr[0]) { - case 0x00: /* zero */ - break; - case 0x01: /* one */ - break; - case 0x08: /* name op */ - offset += parse_namestring(s, ptr + offset, "name"); - offset += parse_termobj(s, ptr + offset); - if (s->dev && strcmp(s->name, "_HID") == 0) - s->dev->hid_aml = ptr; - if (s->dev && strcmp(s->name, "_STA") == 0) - s->dev->sta_aml = ptr; - break; - case 0x0a: /* byte prefix */ - offset++; - break; - case 0x0b: /* word prefix */ - offset += 2; - break; - case 0x0c: /* dword prefix */ - offset += 4; - break; - case 0x0d: /* string prefix */ - while (ptr[offset]) - offset++; - offset++; - break; - case 0x10: /* scope op */ - offset += parse_pkg_scope(s, ptr + offset); - break; - case 0x11: /* buffer op */ - offset += parse_pkg_buffer(s, ptr + offset); - break; - case 0x12: /* package op */ - case 0x13: /* var package op */ - offset += parse_pkg_skip(s, ptr + offset, ptr[0], 0); - break; - case 0x14: /* method op */ - offset += parse_pkg_skip(s, ptr + offset, ptr[0], 1); - if (s->dev && strcmp(s->name, "_STA") == 0) - s->dev->sta_aml = ptr; - break; - case 0x5b: /* ext op prefix */ - offset++; - switch (ptr[1]) { - case 0x01: /* mutex op */ - offset += parse_namestring(s, ptr + offset, "mutex"); - offset++; /* sync flags */ - break; - case 0x80: /* op region op */ - offset += parse_namestring(s, ptr + offset, "op region"); - offset++; /* region space */ - offset += parse_termarg_int(ptr + offset, &s->error, NULL); - offset += parse_termarg_int(ptr + offset, &s->error, NULL); - break; - case 0x81: /* field op */ - case 0x83: /* processor op */ - case 0x84: /* power resource op */ - case 0x85: /* thermal zone op */ - offset += parse_pkg_skip(s, ptr + offset, 0x5b00 | ptr[1], 1); - break; - case 0x82: /* device op */ - offset += parse_pkg_device(s, ptr + offset); - break; - default: - hex(ptr, 16, 3, __func__); - s->error = 1; - break; - } - break; - default: - hex(ptr, 16, 3, __func__); - s->error = 1; - break; - } - s->depth--; - - return offset; -} - -static void parse_termlist(struct parse_state *s, - u8 *ptr, int offset, int pkglength) -{ - for (;;) { - offset += parse_termobj(s, ptr + offset); - if (offset == pkglength) - return; - if (offset > pkglength) { - dprintf(1, "%s: overrun: %d/%d\n", __func__, - offset, pkglength); - s->error = 1; - return; - } - if (s->error) { - dprintf(1, "%s: parse error, skip from %d/%d\n", __func__, - offset, pkglength); - s->error = 0; - return; - } - } -} - -static struct acpi_device *acpi_dsdt_find(struct acpi_device *prev, - const u8 *aml1, int size1, - const u8 *aml2, int size2) -{ - struct acpi_device *dev; - struct hlist_node *node; - - if (!prev) - node = acpi_devices.first; - else - node = prev->node.next; - - for (; node != NULL; node = dev->node.next) { - dev = container_of(node, struct acpi_device, node); - if (!aml1 && !aml2) - return dev; - if (!dev->hid_aml) - continue; - if (aml1 && memcmp(dev->hid_aml + 5, aml1, size1) == 0) - return dev; - if (aml2 && memcmp(dev->hid_aml + 5, aml2, size2) == 0) - return dev; - } - return NULL; -} - -static int acpi_dsdt_present(struct acpi_device *dev) -{ - if (!dev) - return 0; /* no */ - if (!dev->sta_aml) - return 1; /* yes */ - if (dev->sta_aml[0] == 0x14) - return -1; /* unknown (can't evaluate method) */ - if (dev->sta_aml[0] == 0x08) { - u64 value = 0; - parse_termarg_int(dev->sta_aml + 5, NULL, &value); - if (value == 0) - return 0; /* no */ - else - return 1; /* yes */ - } - return -1; /* unknown (should not happen) */ -} - -/**************************************************************** - * DSDT parser, public interface - ****************************************************************/ - -struct acpi_device *acpi_dsdt_find_string(struct acpi_device *prev, - const char *hid) -{ - if (!CONFIG_ACPI_PARSE) - return NULL; - - u8 aml[10]; - int len = snprintf((char*)aml, sizeof(aml), "\x0d%s", hid); - return acpi_dsdt_find(prev, aml, len, NULL, 0); -} - -struct acpi_device *acpi_dsdt_find_eisaid(struct acpi_device *prev, u16 eisaid) -{ - if (!CONFIG_ACPI_PARSE) - return NULL; - u8 aml1[] = { - 0x0c, 0x41, 0xd0, - eisaid >> 8, - eisaid & 0xff - }; - u8 aml2[10]; - int len2 = snprintf((char*)aml2, sizeof(aml2), "\x0dPNP%04X", eisaid); - return acpi_dsdt_find(prev, aml1, 5, aml2, len2); -} - -char *acpi_dsdt_name(struct acpi_device *dev) -{ - if (!CONFIG_ACPI_PARSE || !dev) - return NULL; - return dev->name; -} - -int acpi_dsdt_find_io(struct acpi_device *dev, u64 *min, u64 *max) -{ - if (!CONFIG_ACPI_PARSE || !dev || !dev->crs_data) - return -1; - return find_resource(dev->crs_data, dev->crs_size, - 1 /* I/O */, min, max); -} - -int acpi_dsdt_find_mem(struct acpi_device *dev, u64 *min, u64 *max) -{ - if (!CONFIG_ACPI_PARSE || !dev || !dev->crs_data) - return -1; - return find_resource(dev->crs_data, dev->crs_size, - 0 /* mem */, min, max); -} - -int acpi_dsdt_find_irq(struct acpi_device *dev, u64 *irq) -{ - u64 max; - if (!CONFIG_ACPI_PARSE || !dev || !dev->crs_data) - return -1; - return find_resource(dev->crs_data, dev->crs_size, - 3 /* irq */, irq, &max); -} - -int acpi_dsdt_present_eisaid(u16 eisaid) -{ - if (!CONFIG_ACPI_PARSE) - return -1; /* unknown */ - if (hlist_empty(&acpi_devices)) - return -1; /* unknown (no dsdt table) */ - - struct acpi_device *dev = acpi_dsdt_find_eisaid(NULL, eisaid); - return acpi_dsdt_present(dev); -} - -void acpi_dsdt_parse(void) -{ - if (!CONFIG_ACPI_PARSE) - return; - - struct fadt_descriptor_rev1 *fadt = find_acpi_table(FACP_SIGNATURE); - if (!fadt) - return; - u8 *dsdt = (void*)(fadt->dsdt); - if (!dsdt) - return; - - u32 length = *(u32*)(dsdt + 4); - u32 offset = 0x24; - dprintf(1, "ACPI: parse DSDT at %p (len %d)\n", dsdt, length); - - struct parse_state s; - memset(&s, 0, sizeof(s)); - parse_termlist(&s, dsdt, offset, length); - - if (!parse_dumpdevs) - return; - - struct acpi_device *dev; - dprintf(1, "ACPI: dumping dsdt devices\n"); - for (dev = acpi_dsdt_find(NULL, NULL, 0, NULL, 0); - dev != NULL; - dev = acpi_dsdt_find(dev, NULL, 0, NULL, 0)) { - dprintf(1, " %s", acpi_dsdt_name(dev)); - if (dev->hid_aml) - dprintf(1, ", hid"); - if (dev->sta_aml) - dprintf(1, ", sta (0x%x)", dev->sta_aml[0]); - if (dev->crs_data) - dprintf(1, ", crs"); - dprintf(1, "\n"); - if (dev->crs_data) - print_resources(" ", dev->crs_data, dev->crs_size); - } -} diff --git a/payloads/external/SeaBIOS/src/fw/lzmadecode.c b/payloads/external/SeaBIOS/src/fw/lzmadecode.c deleted file mode 100644 index 65819b53..00000000 --- a/payloads/external/SeaBIOS/src/fw/lzmadecode.c +++ /dev/null @@ -1,398 +0,0 @@ -/* - LzmaDecode.c - LZMA Decoder (optimized for Speed version) - - LZMA SDK 4.40 Copyright (c) 1999-2006 Igor Pavlov (2006-05-01) - http://www.7-zip.org/ - - LZMA SDK is licensed under two licenses: - 1) GNU Lesser General Public License (GNU LGPL) - 2) Common Public License (CPL) - It means that you can select one of these two licenses and - follow rules of that license. - - SPECIAL EXCEPTION: - Igor Pavlov, as the author of this Code, expressly permits you to - statically or dynamically link your Code (or bind by name) to the - interfaces of this file without subjecting your linked Code to the - terms of the CPL or GNU LGPL. Any modifications or additions - to this file, however, are subject to the LGPL or CPL terms. -*/ - -#include "lzmadecode.h" - -#define kNumTopBits 24 -#define kTopValue ((UInt32)1 << kNumTopBits) - -#define kNumBitModelTotalBits 11 -#define kBitModelTotal (1 << kNumBitModelTotalBits) -#define kNumMoveBits 5 - -#define RC_READ_BYTE (*Buffer++) - -#define RC_INIT2 Code = 0; Range = 0xFFFFFFFF; \ - { int i; for(i = 0; i < 5; i++) { RC_TEST; Code = (Code << 8) | RC_READ_BYTE; }} - - -#define RC_TEST { if (Buffer == BufferLim) return LZMA_RESULT_DATA_ERROR; } - -#define RC_INIT(buffer, bufferSize) Buffer = buffer; BufferLim = buffer + bufferSize; RC_INIT2 - - -#define RC_NORMALIZE if (Range < kTopValue) { RC_TEST; Range <<= 8; Code = (Code << 8) | RC_READ_BYTE; } - -#define IfBit0(p) RC_NORMALIZE; bound = (Range >> kNumBitModelTotalBits) * *(p); if (Code < bound) -#define UpdateBit0(p) Range = bound; *(p) += (kBitModelTotal - *(p)) >> kNumMoveBits; -#define UpdateBit1(p) Range -= bound; Code -= bound; *(p) -= (*(p)) >> kNumMoveBits; - -#define RC_GET_BIT2(p, mi, A0, A1) IfBit0(p) \ - { UpdateBit0(p); mi <<= 1; A0; } else \ - { UpdateBit1(p); mi = (mi + mi) + 1; A1; } - -#define RC_GET_BIT(p, mi) RC_GET_BIT2(p, mi, ; , ;) - -#define RangeDecoderBitTreeDecode(probs, numLevels, res) \ - { int i = numLevels; res = 1; \ - do { CProb *cp = probs + res; RC_GET_BIT(cp, res) } while(--i != 0); \ - res -= (1 << numLevels); } - - -#define kNumPosBitsMax 4 -#define kNumPosStatesMax (1 << kNumPosBitsMax) - -#define kLenNumLowBits 3 -#define kLenNumLowSymbols (1 << kLenNumLowBits) -#define kLenNumMidBits 3 -#define kLenNumMidSymbols (1 << kLenNumMidBits) -#define kLenNumHighBits 8 -#define kLenNumHighSymbols (1 << kLenNumHighBits) - -#define LenChoice 0 -#define LenChoice2 (LenChoice + 1) -#define LenLow (LenChoice2 + 1) -#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits)) -#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits)) -#define kNumLenProbs (LenHigh + kLenNumHighSymbols) - - -#define kNumStates 12 -#define kNumLitStates 7 - -#define kStartPosModelIndex 4 -#define kEndPosModelIndex 14 -#define kNumFullDistances (1 << (kEndPosModelIndex >> 1)) - -#define kNumPosSlotBits 6 -#define kNumLenToPosStates 4 - -#define kNumAlignBits 4 -#define kAlignTableSize (1 << kNumAlignBits) - -#define kMatchMinLen 2 - -#define IsMatch 0 -#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax)) -#define IsRepG0 (IsRep + kNumStates) -#define IsRepG1 (IsRepG0 + kNumStates) -#define IsRepG2 (IsRepG1 + kNumStates) -#define IsRep0Long (IsRepG2 + kNumStates) -#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax)) -#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits)) -#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex) -#define LenCoder (Align + kAlignTableSize) -#define RepLenCoder (LenCoder + kNumLenProbs) -#define Literal (RepLenCoder + kNumLenProbs) - -#if Literal != LZMA_BASE_SIZE -StopCompilingDueBUG -#endif - -int LzmaDecodeProperties(CLzmaProperties *propsRes, const unsigned char *propsData, int size) -{ - unsigned char prop0; - if (size < LZMA_PROPERTIES_SIZE) - return LZMA_RESULT_DATA_ERROR; - prop0 = propsData[0]; - if (prop0 >= (9 * 5 * 5)) - return LZMA_RESULT_DATA_ERROR; - { - for (propsRes->pb = 0; prop0 >= (9 * 5); propsRes->pb++, prop0 -= (9 * 5)); - for (propsRes->lp = 0; prop0 >= 9; propsRes->lp++, prop0 -= 9); - propsRes->lc = prop0; - /* - unsigned char remainder = (unsigned char)(prop0 / 9); - propsRes->lc = prop0 % 9; - propsRes->pb = remainder / 5; - propsRes->lp = remainder % 5; - */ - } - - return LZMA_RESULT_OK; -} - -#define kLzmaStreamWasFinishedId (-1) - -int LzmaDecode(CLzmaDecoderState *vs, - const unsigned char *inStream, SizeT inSize, SizeT *inSizeProcessed, - unsigned char *outStream, SizeT outSize, SizeT *outSizeProcessed) -{ - CProb *p = vs->Probs; - SizeT nowPos = 0; - Byte previousByte = 0; - UInt32 posStateMask = (1 << (vs->Properties.pb)) - 1; - UInt32 literalPosMask = (1 << (vs->Properties.lp)) - 1; - int lc = vs->Properties.lc; - - - int state = 0; - UInt32 rep0 = 1, rep1 = 1, rep2 = 1, rep3 = 1; - int len = 0; - const Byte *Buffer; - const Byte *BufferLim; - UInt32 Range; - UInt32 Code; - - *inSizeProcessed = 0; - *outSizeProcessed = 0; - - { - UInt32 i; - UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + vs->Properties.lp)); - for (i = 0; i < numProbs; i++) - p[i] = kBitModelTotal >> 1; - } - - RC_INIT(inStream, inSize); - - - while(nowPos < outSize) - { - CProb *prob; - UInt32 bound; - int posState = (int)( - (nowPos - ) - & posStateMask); - - prob = p + IsMatch + (state << kNumPosBitsMax) + posState; - IfBit0(prob) - { - int symbol = 1; - UpdateBit0(prob) - prob = p + Literal + (LZMA_LIT_SIZE * - ((( - (nowPos - ) - & literalPosMask) << lc) + (previousByte >> (8 - lc)))); - - if (state >= kNumLitStates) - { - int matchByte; - matchByte = outStream[nowPos - rep0]; - do - { - int bit; - CProb *probLit; - matchByte <<= 1; - bit = (matchByte & 0x100); - probLit = prob + 0x100 + bit + symbol; - RC_GET_BIT2(probLit, symbol, if (bit != 0) break, if (bit == 0) break) - } - while (symbol < 0x100); - } - while (symbol < 0x100) - { - CProb *probLit = prob + symbol; - RC_GET_BIT(probLit, symbol) - } - previousByte = (Byte)symbol; - - outStream[nowPos++] = previousByte; - if (state < 4) state = 0; - else if (state < 10) state -= 3; - else state -= 6; - } - else - { - UpdateBit1(prob); - prob = p + IsRep + state; - IfBit0(prob) - { - UpdateBit0(prob); - rep3 = rep2; - rep2 = rep1; - rep1 = rep0; - state = state < kNumLitStates ? 0 : 3; - prob = p + LenCoder; - } - else - { - UpdateBit1(prob); - prob = p + IsRepG0 + state; - IfBit0(prob) - { - UpdateBit0(prob); - prob = p + IsRep0Long + (state << kNumPosBitsMax) + posState; - IfBit0(prob) - { - UpdateBit0(prob); - - if (nowPos == 0) - return LZMA_RESULT_DATA_ERROR; - - state = state < kNumLitStates ? 9 : 11; - previousByte = outStream[nowPos - rep0]; - outStream[nowPos++] = previousByte; - - continue; - } - else - { - UpdateBit1(prob); - } - } - else - { - UInt32 distance; - UpdateBit1(prob); - prob = p + IsRepG1 + state; - IfBit0(prob) - { - UpdateBit0(prob); - distance = rep1; - } - else - { - UpdateBit1(prob); - prob = p + IsRepG2 + state; - IfBit0(prob) - { - UpdateBit0(prob); - distance = rep2; - } - else - { - UpdateBit1(prob); - distance = rep3; - rep3 = rep2; - } - rep2 = rep1; - } - rep1 = rep0; - rep0 = distance; - } - state = state < kNumLitStates ? 8 : 11; - prob = p + RepLenCoder; - } - { - int numBits, offset; - CProb *probLen = prob + LenChoice; - IfBit0(probLen) - { - UpdateBit0(probLen); - probLen = prob + LenLow + (posState << kLenNumLowBits); - offset = 0; - numBits = kLenNumLowBits; - } - else - { - UpdateBit1(probLen); - probLen = prob + LenChoice2; - IfBit0(probLen) - { - UpdateBit0(probLen); - probLen = prob + LenMid + (posState << kLenNumMidBits); - offset = kLenNumLowSymbols; - numBits = kLenNumMidBits; - } - else - { - UpdateBit1(probLen); - probLen = prob + LenHigh; - offset = kLenNumLowSymbols + kLenNumMidSymbols; - numBits = kLenNumHighBits; - } - } - RangeDecoderBitTreeDecode(probLen, numBits, len); - len += offset; - } - - if (state < 4) - { - int posSlot; - state += kNumLitStates; - prob = p + PosSlot + - ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) << - kNumPosSlotBits); - RangeDecoderBitTreeDecode(prob, kNumPosSlotBits, posSlot); - if (posSlot >= kStartPosModelIndex) - { - int numDirectBits = ((posSlot >> 1) - 1); - rep0 = (2 | ((UInt32)posSlot & 1)); - if (posSlot < kEndPosModelIndex) - { - rep0 <<= numDirectBits; - prob = p + SpecPos + rep0 - posSlot - 1; - } - else - { - numDirectBits -= kNumAlignBits; - do - { - RC_NORMALIZE - Range >>= 1; - rep0 <<= 1; - if (Code >= Range) - { - Code -= Range; - rep0 |= 1; - } - } - while (--numDirectBits != 0); - prob = p + Align; - rep0 <<= kNumAlignBits; - numDirectBits = kNumAlignBits; - } - { - int i = 1; - int mi = 1; - do - { - CProb *prob3 = prob + mi; - RC_GET_BIT2(prob3, mi, ; , rep0 |= i); - i <<= 1; - } - while(--numDirectBits != 0); - } - } - else - rep0 = posSlot; - if (++rep0 == (UInt32)(0)) - { - /* it's for stream version */ - len = kLzmaStreamWasFinishedId; - break; - } - } - - len += kMatchMinLen; - if (rep0 > nowPos) - return LZMA_RESULT_DATA_ERROR; - - - do - { - previousByte = outStream[nowPos - rep0]; - len--; - outStream[nowPos++] = previousByte; - } - while(len != 0 && nowPos < outSize); - } - } - RC_NORMALIZE; - - - *inSizeProcessed = (SizeT)(Buffer - inStream); - *outSizeProcessed = nowPos; - return LZMA_RESULT_OK; -} diff --git a/payloads/external/SeaBIOS/src/fw/lzmadecode.h b/payloads/external/SeaBIOS/src/fw/lzmadecode.h deleted file mode 100644 index dedde0de..00000000 --- a/payloads/external/SeaBIOS/src/fw/lzmadecode.h +++ /dev/null @@ -1,67 +0,0 @@ -/* - LzmaDecode.h - LZMA Decoder interface - - LZMA SDK 4.40 Copyright (c) 1999-2006 Igor Pavlov (2006-05-01) - http://www.7-zip.org/ - - LZMA SDK is licensed under two licenses: - 1) GNU Lesser General Public License (GNU LGPL) - 2) Common Public License (CPL) - It means that you can select one of these two licenses and - follow rules of that license. - - SPECIAL EXCEPTION: - Igor Pavlov, as the author of this code, expressly permits you to - statically or dynamically link your code (or bind by name) to the - interfaces of this file without subjecting your linked code to the - terms of the CPL or GNU LGPL. Any modifications or additions - to this file, however, are subject to the LGPL or CPL terms. -*/ - -#ifndef __LZMADECODE_H -#define __LZMADECODE_H - -typedef unsigned char Byte; -typedef unsigned short UInt16; -typedef unsigned int UInt32; -typedef UInt32 SizeT; - -#define CProb UInt16 - -#define LZMA_RESULT_OK 0 -#define LZMA_RESULT_DATA_ERROR 1 - - -#define LZMA_BASE_SIZE 1846 -#define LZMA_LIT_SIZE 768 - -#define LZMA_PROPERTIES_SIZE 5 - -typedef struct _CLzmaProperties -{ - int lc; - int lp; - int pb; -}CLzmaProperties; - -int LzmaDecodeProperties(CLzmaProperties *propsRes, const unsigned char *propsData, int size); - -#define LzmaGetNumProbs(Properties) (LZMA_BASE_SIZE + (LZMA_LIT_SIZE << ((Properties)->lc + (Properties)->lp))) - -#define kLzmaNeedInitId (-2) - -typedef struct _CLzmaDecoderState -{ - CLzmaProperties Properties; - CProb *Probs; - - -} CLzmaDecoderState; - - -int LzmaDecode(CLzmaDecoderState *vs, - const unsigned char *inStream, SizeT inSize, SizeT *inSizeProcessed, - unsigned char *outStream, SizeT outSize, SizeT *outSizeProcessed); - -#endif diff --git a/payloads/external/SeaBIOS/src/fw/mptable.c b/payloads/external/SeaBIOS/src/fw/mptable.c deleted file mode 100644 index 47385cc5..00000000 --- a/payloads/external/SeaBIOS/src/fw/mptable.c +++ /dev/null @@ -1,197 +0,0 @@ -// MPTable generation (on emulators) -// DO NOT ADD NEW FEATURES HERE. (See paravirt.c / biostables.c instead.) -// -// Copyright (C) 2008-2010 Kevin O'Connor <kevin@koconnor.net> -// Copyright (C) 2006 Fabrice Bellard -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "config.h" // CONFIG_* -#include "hw/pci.h" // pci_bdf_to_bus -#include "hw/pcidevice.h" // foreachpci -#include "hw/pci_regs.h" // PCI_INTERRUPT_PIN -#include "malloc.h" // free -#include "output.h" // dprintf -#include "romfile.h" // romfile_loadint -#include "std/mptable.h" // MPTABLE_SIGNATURE -#include "string.h" // memset -#include "util.h" // MaxCountCPUs -#include "x86.h" // cpuid - -void -mptable_setup(void) -{ - if (! CONFIG_MPTABLE) - return; - - dprintf(3, "init MPTable\n"); - - // Config structure in temp area. - struct mptable_config_s *config = malloc_tmp(32*1024); - if (!config) { - warn_noalloc(); - return; - } - memset(config, 0, sizeof(*config)); - config->signature = MPCONFIG_SIGNATURE; - config->spec = 4; - memcpy(config->oemid, BUILD_CPUNAME8, sizeof(config->oemid)); - memcpy(config->productid, "0.1 ", sizeof(config->productid)); - config->lapic = BUILD_APIC_ADDR; - - // Detect cpu info - u32 cpuid_signature, ebx, ecx, cpuid_features; - cpuid(1, &cpuid_signature, &ebx, &ecx, &cpuid_features); - if (! cpuid_signature) { - // Use default values. - cpuid_signature = 0x600; - cpuid_features = 0x201; - } - int pkgcpus = 1; - if (cpuid_features & (1 << 28)) { - /* Only populate the MPS tables with the first logical CPU in - each package */ - pkgcpus = (ebx >> 16) & 0xff; - pkgcpus = 1 << (__fls(pkgcpus - 1) + 1); /* round up to power of 2 */ - } - u8 apic_version = readl((u8*)BUILD_APIC_ADDR + 0x30) & 0xff; - - // CPU definitions. - struct mpt_cpu *cpus = (void*)&config[1], *cpu = cpus; - int i; - for (i = 0; i < MaxCountCPUs; i+=pkgcpus) { - memset(cpu, 0, sizeof(*cpu)); - cpu->type = MPT_TYPE_CPU; - cpu->apicid = i; - cpu->apicver = apic_version; - /* cpu flags: enabled, bootstrap cpu */ - cpu->cpuflag = (apic_id_is_present(i) ? 0x01 : 0x00) | ((i==0) ? 0x02 : 0x00); - cpu->cpusignature = cpuid_signature; - cpu->featureflag = cpuid_features; - cpu++; - } - int entrycount = cpu - cpus; - - // PCI bus - struct mpt_bus *buses = (void*)cpu, *bus = buses; - if (!hlist_empty(&PCIDevices)) { - memset(bus, 0, sizeof(*bus)); - bus->type = MPT_TYPE_BUS; - bus->busid = 0; - memcpy(bus->bustype, "PCI ", sizeof(bus->bustype)); - bus++; - entrycount++; - } - - /* isa bus */ - int isabusid = bus - buses; - memset(bus, 0, sizeof(*bus)); - bus->type = MPT_TYPE_BUS; - bus->busid = isabusid; - memcpy(bus->bustype, "ISA ", sizeof(bus->bustype)); - bus++; - entrycount++; - - /* ioapic */ - u8 ioapic_id = BUILD_IOAPIC_ID; - struct mpt_ioapic *ioapic = (void*)bus; - memset(ioapic, 0, sizeof(*ioapic)); - ioapic->type = MPT_TYPE_IOAPIC; - ioapic->apicid = ioapic_id; - ioapic->apicver = 0x11; - ioapic->flags = 1; // enable - ioapic->apicaddr = BUILD_IOAPIC_ADDR; - entrycount++; - - /* irqs */ - struct mpt_intsrc *intsrcs = (void*)&ioapic[1], *intsrc = intsrcs; - int dev = -1; - unsigned short pinmask = 0; - - struct pci_device *pci; - foreachpci(pci) { - u16 bdf = pci->bdf; - if (pci_bdf_to_bus(bdf) != 0) - break; - int pin = pci_config_readb(bdf, PCI_INTERRUPT_PIN); - int irq = pci_config_readb(bdf, PCI_INTERRUPT_LINE); - if (pin == 0) - continue; - if (dev != pci_bdf_to_busdev(bdf)) { - dev = pci_bdf_to_busdev(bdf); - pinmask = 0; - } - if (pinmask & (1 << pin)) /* pin was seen already */ - continue; - pinmask |= (1 << pin); - memset(intsrc, 0, sizeof(*intsrc)); - intsrc->type = MPT_TYPE_INTSRC; - intsrc->irqtype = 0; /* INT */ - intsrc->irqflag = 1; /* active high */ - intsrc->srcbus = pci_bdf_to_bus(bdf); /* PCI bus */ - intsrc->srcbusirq = (pci_bdf_to_dev(bdf) << 2) | (pin - 1); - intsrc->dstapic = ioapic_id; - intsrc->dstirq = irq; - intsrc++; - } - - int irq0_override = romfile_loadint("etc/irq0-override", 0); - for (i = 0; i < 16; i++) { - memset(intsrc, 0, sizeof(*intsrc)); - if (BUILD_PCI_IRQS & (1 << i)) - continue; - intsrc->type = MPT_TYPE_INTSRC; - intsrc->irqtype = 0; /* INT */ - intsrc->irqflag = 0; /* conform to bus spec */ - intsrc->srcbus = isabusid; /* ISA bus */ - intsrc->srcbusirq = i; - intsrc->dstapic = ioapic_id; - intsrc->dstirq = i; - if (irq0_override) { - /* Destination 2 is covered by irq0->inti2 override (i == - 0). Source IRQ 2 is unused */ - if (i == 0) - intsrc->dstirq = 2; - else if (i == 2) - intsrc--; - } - intsrc++; - } - - /* Local interrupt assignment */ - intsrc->type = MPT_TYPE_LOCAL_INT; - intsrc->irqtype = 3; /* ExtINT */ - intsrc->irqflag = 0; /* PO, EL default */ - intsrc->srcbus = isabusid; /* ISA */ - intsrc->srcbusirq = 0; - intsrc->dstapic = 0; /* BSP == APIC #0 */ - intsrc->dstirq = 0; /* LINTIN0 */ - intsrc++; - - intsrc->type = MPT_TYPE_LOCAL_INT; - intsrc->irqtype = 1; /* NMI */ - intsrc->irqflag = 0; /* PO, EL default */ - intsrc->srcbus = isabusid; /* ISA */ - intsrc->srcbusirq = 0; - intsrc->dstapic = 0xff; /* to all local APICs */ - intsrc->dstirq = 1; /* LINTIN1 */ - intsrc++; - entrycount += intsrc - intsrcs; - - // Finalize config structure. - int length = (void*)intsrc - (void*)config; - config->entrycount = entrycount; - config->length = length; - config->checksum -= checksum(config, length); - - // floating pointer structure - struct mptable_floating_s floating; - memset(&floating, 0, sizeof(floating)); - floating.signature = MPTABLE_SIGNATURE; - floating.physaddr = (u32)config; - floating.length = 1; - floating.spec_rev = 4; - floating.checksum -= checksum(&floating, sizeof(floating)); - copy_mptable(&floating); - free(config); -} diff --git a/payloads/external/SeaBIOS/src/fw/mtrr.c b/payloads/external/SeaBIOS/src/fw/mtrr.c deleted file mode 100644 index 3e799cea..00000000 --- a/payloads/external/SeaBIOS/src/fw/mtrr.c +++ /dev/null @@ -1,105 +0,0 @@ -// Initialize MTRRs - mostly useful on KVM. -// -// Copyright (C) 2006 Fabrice Bellard -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "config.h" // CONFIG_* -#include "output.h" // dprintf -#include "paravirt.h" // RamSize -#include "util.h" // mtrr_setup -#include "x86.h" // cpuid - -#define MSR_MTRRcap 0x000000fe -#define MSR_MTRRfix64K_00000 0x00000250 -#define MSR_MTRRfix16K_80000 0x00000258 -#define MSR_MTRRfix16K_A0000 0x00000259 -#define MSR_MTRRfix4K_C0000 0x00000268 -#define MSR_MTRRfix4K_C8000 0x00000269 -#define MSR_MTRRfix4K_D0000 0x0000026a -#define MSR_MTRRfix4K_D8000 0x0000026b -#define MSR_MTRRfix4K_E0000 0x0000026c -#define MSR_MTRRfix4K_E8000 0x0000026d -#define MSR_MTRRfix4K_F0000 0x0000026e -#define MSR_MTRRfix4K_F8000 0x0000026f -#define MSR_MTRRdefType 0x000002ff - -#define MTRRphysBase_MSR(reg) (0x200 + 2 * (reg)) -#define MTRRphysMask_MSR(reg) (0x200 + 2 * (reg) + 1) - -#define MTRR_MEMTYPE_UC 0 -#define MTRR_MEMTYPE_WC 1 -#define MTRR_MEMTYPE_WT 4 -#define MTRR_MEMTYPE_WP 5 -#define MTRR_MEMTYPE_WB 6 - -void mtrr_setup(void) -{ - if (!CONFIG_MTRR_INIT) - return; - - u32 eax, ebx, ecx, edx, cpuid_features; - cpuid(1, &eax, &ebx, &ecx, &cpuid_features); - if (!(cpuid_features & CPUID_MTRR)) - return; - if (!(cpuid_features & CPUID_MSR)) - return; - - dprintf(3, "init mtrr\n"); - - u32 mtrr_cap = rdmsr(MSR_MTRRcap); - int vcnt = mtrr_cap & 0xff; - int fix = mtrr_cap & 0x100; - if (!vcnt || !fix) - return; - - // Disable MTRRs - wrmsr_smp(MSR_MTRRdefType, 0); - - // Set fixed MTRRs - union u64b { - u8 valb[8]; - u64 val; - } u; - u.val = 0; - int i; - for (i = 0; i < 8; i++) - if (RamSize >= 65536 * (i + 1)) - u.valb[i] = MTRR_MEMTYPE_WB; - wrmsr_smp(MSR_MTRRfix64K_00000, u.val); - u.val = 0; - for (i = 0; i < 8; i++) - if (RamSize >= 0x80000 + 16384 * (i + 1)) - u.valb[i] = MTRR_MEMTYPE_WB; - wrmsr_smp(MSR_MTRRfix16K_80000, u.val); - wrmsr_smp(MSR_MTRRfix16K_A0000, 0); // 0xA0000-0xC0000 is uncached - int j; - for (j = 0; j < 8; j++) { - u.val = 0; - for (i = 0; i < 8; i++) - if (RamSize >= 0xC0000 + j * 0x8000 + 4096 * (i + 1)) - u.valb[i] = MTRR_MEMTYPE_WP; - wrmsr_smp(MSR_MTRRfix4K_C0000 + j, u.val); - } - - // Set variable MTRRs - int phys_bits = 36; - cpuid(0x80000000u, &eax, &ebx, &ecx, &edx); - if (eax >= 0x80000008) { - /* Get physical bits from leaf 0x80000008 (if available) */ - cpuid(0x80000008u, &eax, &ebx, &ecx, &edx); - phys_bits = eax & 0xff; - } - u64 phys_mask = ((1ull << phys_bits) - 1); - for (i=0; i<vcnt; i++) { - wrmsr_smp(MTRRphysBase_MSR(i), 0); - wrmsr_smp(MTRRphysMask_MSR(i), 0); - } - /* Mark 3.5-4GB as UC, anything not specified defaults to WB */ - wrmsr_smp(MTRRphysBase_MSR(0), pcimem_start | MTRR_MEMTYPE_UC); - wrmsr_smp(MTRRphysMask_MSR(0) - , (-((1ull<<32)-pcimem_start) & phys_mask) | 0x800); - - // Enable fixed and variable MTRRs; set default type. - wrmsr_smp(MSR_MTRRdefType, 0xc00 | MTRR_MEMTYPE_WB); -} diff --git a/payloads/external/SeaBIOS/src/fw/multiboot.c b/payloads/external/SeaBIOS/src/fw/multiboot.c deleted file mode 100644 index d9df0676..00000000 --- a/payloads/external/SeaBIOS/src/fw/multiboot.c +++ /dev/null @@ -1,111 +0,0 @@ -// Multiboot interface support. -// -// Copyright (C) 2015 Vladimir Serbinenko <phcoder@gmail.com> -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "config.h" // CONFIG_* -#include "malloc.h" // free -#include "output.h" // dprintf -#include "romfile.h" // romfile_add -#include "std/multiboot.h" // MULTIBOOT_* -#include "string.h" // memset -#include "util.h" // multiboot_init - -struct mbfs_romfile_s { - struct romfile_s file; - void *data; -}; - -static int -extract_filename(char *dest, char *src, size_t lim) -{ - char *ptr; - for (ptr = src; *ptr; ptr++) { - if (!(ptr == src || ptr[-1] == ' ' || ptr[-1] == '\t')) - continue; - /* memcmp stops early if it encounters \0 as it doesn't match name=. */ - if (memcmp(ptr, "name=", 5) == 0) { - int i; - char *optr = dest; - for (i = 0, ptr += 5; *ptr && *ptr != ' ' && i < lim; i++) { - *optr++ = *ptr++; - } - *optr++ = '\0'; - return 1; - } - } - return 0; -} - -// Copy a file to memory -static int -mbfs_copyfile(struct romfile_s *file, void *dst, u32 maxlen) -{ - struct mbfs_romfile_s *cfile; - cfile = container_of(file, struct mbfs_romfile_s, file); - u32 size = cfile->file.size; - void *src = cfile->data; - - // Not compressed. - dprintf(3, "Copying data %d@%p to %d@%p\n", size, src, maxlen, dst); - if (size > maxlen) { - warn_noalloc(); - return -1; - } - iomemcpy(dst, src, size); - return size; -} - -u32 __VISIBLE entry_elf_eax, entry_elf_ebx; - -void -multiboot_init(void) -{ - struct multiboot_info *mbi; - if (!CONFIG_MULTIBOOT) - return; - dprintf(1, "multiboot: eax=%x, ebx=%x\n", entry_elf_eax, entry_elf_ebx); - if (entry_elf_eax != MULTIBOOT_BOOTLOADER_MAGIC) - return; - mbi = (void *)entry_elf_ebx; - dprintf(1, "mbptr=%p\n", mbi); - dprintf(1, "flags=0x%x, mods=0x%x, mods_c=%d\n", mbi->flags, mbi->mods_addr, - mbi->mods_count); - if (!(mbi->flags & MULTIBOOT_INFO_MODS)) - return; - int i; - struct multiboot_mod_list *mod = (void *)mbi->mods_addr; - for (i = 0; i < mbi->mods_count; i++) { - struct mbfs_romfile_s *cfile; - u8 *copy; - u32 len; - if (!mod[i].cmdline) - continue; - len = mod[i].mod_end - mod[i].mod_start; - cfile = malloc_tmp(sizeof(*cfile)); - if (!cfile) { - warn_noalloc(); - return; - } - memset(cfile, 0, sizeof(*cfile)); - dprintf(1, "module %s, size 0x%x\n", (char *)mod[i].cmdline, len); - if (!extract_filename(cfile->file.name, (char *)mod[i].cmdline, - sizeof(cfile->file.name))) { - free(cfile); - continue; - } - dprintf(1, "assigned file name <%s>\n", cfile->file.name); - cfile->file.size = len; - copy = malloc_tmp(len); - if (!copy) { - warn_noalloc(); - free(cfile); - return; - } - memcpy(copy, (void *)mod[i].mod_start, len); - cfile->file.copy = mbfs_copyfile; - cfile->data = copy; - romfile_add(&cfile->file); - } -} diff --git a/payloads/external/SeaBIOS/src/fw/paravirt.c b/payloads/external/SeaBIOS/src/fw/paravirt.c deleted file mode 100644 index fba4e52d..00000000 --- a/payloads/external/SeaBIOS/src/fw/paravirt.c +++ /dev/null @@ -1,721 +0,0 @@ -// Paravirtualization support. -// -// Copyright (C) 2013 Kevin O'Connor <kevin@koconnor.net> -// Copyright (C) 2009 Red Hat Inc. -// -// Authors: -// Gleb Natapov <gnatapov@redhat.com> -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "byteorder.h" // be32_to_cpu -#include "config.h" // CONFIG_QEMU -#include "e820map.h" // e820_add -#include "hw/pci.h" // pci_config_readw -#include "hw/pcidevice.h" // pci_probe_devices -#include "hw/pci_regs.h" // PCI_DEVICE_ID -#include "hw/serialio.h" // PORT_SERIAL1 -#include "hw/rtc.h" // CMOS_* -#include "hw/virtio-mmio.h" // virtio_mmio_acpi -#include "malloc.h" // malloc_tmp -#include "output.h" // dprintf -#include "paravirt.h" // qemu_cfg_preinit -#include "romfile.h" // romfile_loadint -#include "romfile_loader.h" // romfile_loader_execute -#include "string.h" // memset -#include "util.h" // pci_setup -#include "x86.h" // cpuid -#include "xen.h" // xen_biostable_setup -#include "stacks.h" // yield - -// Amount of continuous ram under 4Gig -u32 RamSize; -// Amount of continuous ram >4Gig -u64 RamSizeOver4G; -// Type of emulator platform. -int PlatformRunningOn VARFSEG; -// cfg enabled -int cfg_enabled = 0; -// cfg_dma enabled -int cfg_dma_enabled = 0; - -inline int qemu_cfg_enabled(void) -{ - return cfg_enabled; -} - -inline int qemu_cfg_dma_enabled(void) -{ - return cfg_dma_enabled; -} - -/* This CPUID returns the signature 'KVMKVMKVM' in ebx, ecx, and edx. It - * should be used to determine that a VM is running under KVM. - */ -#define KVM_CPUID_SIGNATURE 0x40000000 - -static void kvm_detect(void) -{ - unsigned int eax, ebx, ecx, edx; - char signature[13]; - - cpuid(KVM_CPUID_SIGNATURE, &eax, &ebx, &ecx, &edx); - memcpy(signature + 0, &ebx, 4); - memcpy(signature + 4, &ecx, 4); - memcpy(signature + 8, &edx, 4); - signature[12] = 0; - - if (strcmp(signature, "KVMKVMKVM") == 0) { - dprintf(1, "Running on KVM\n"); - PlatformRunningOn |= PF_KVM; - if (eax >= KVM_CPUID_SIGNATURE + 0x10) { - cpuid(KVM_CPUID_SIGNATURE + 0x10, &eax, &ebx, &ecx, &edx); - dprintf(1, "kvm: have invtsc, freq %u kHz\n", eax); - tsctimer_setfreq(eax, "invtsc"); - } - } -} - -#define KVM_FEATURE_CLOCKSOURCE 0 -#define KVM_FEATURE_CLOCKSOURCE2 3 - -#define MSR_KVM_SYSTEM_TIME 0x12 -#define MSR_KVM_SYSTEM_TIME_NEW 0x4b564d01 - -#define PVCLOCK_TSC_STABLE_BIT (1 << 0) - -struct pvclock_vcpu_time_info *kvmclock; - -static void kvmclock_init(void) -{ - unsigned int eax, ebx, ecx, edx, msr; - - if (!runningOnKVM()) - return; - - cpuid(KVM_CPUID_SIGNATURE + 0x01, &eax, &ebx, &ecx, &edx); - if (eax & (1 << KVM_FEATURE_CLOCKSOURCE2)) - msr = MSR_KVM_SYSTEM_TIME_NEW; - else if (eax & (1 << KVM_FEATURE_CLOCKSOURCE)) - msr = MSR_KVM_SYSTEM_TIME; - else - return; - - kvmclock = memalign_low(sizeof(*kvmclock), 32); - memset(kvmclock, 0, sizeof(*kvmclock)); - u32 value = (u32)(kvmclock); - dprintf(1, "kvmclock: at 0x%x (msr 0x%x)\n", value, msr); - wrmsr(msr, value | 0x01); - - if (!(kvmclock->flags & PVCLOCK_TSC_STABLE_BIT)) - return; - u32 MHz = (1000 << 16) / (kvmclock->tsc_to_system_mul >> 16); - if (kvmclock->tsc_shift < 0) - MHz <<= -kvmclock->tsc_shift; - else - MHz >>= kvmclock->tsc_shift; - dprintf(1, "kvmclock: stable tsc, %d MHz\n", MHz); - tsctimer_setfreq(MHz * 1000, "kvmclock"); -} - -static void qemu_detect(void) -{ - if (!CONFIG_QEMU_HARDWARE) - return; - - // Setup QEMU debug output port - qemu_debug_preinit(); - - // check northbridge @ 00:00.0 - u16 v = pci_config_readw(0, PCI_VENDOR_ID); - if (v == 0x0000 || v == 0xffff) - return; - u16 d = pci_config_readw(0, PCI_DEVICE_ID); - u16 sv = pci_config_readw(0, PCI_SUBSYSTEM_VENDOR_ID); - u16 sd = pci_config_readw(0, PCI_SUBSYSTEM_ID); - - if (sv != 0x1af4 || /* Red Hat, Inc */ - sd != 0x1100) /* Qemu virtual machine */ - return; - - PlatformRunningOn |= PF_QEMU; - switch (d) { - case 0x1237: - dprintf(1, "Running on QEMU (i440fx)\n"); - break; - case 0x29c0: - dprintf(1, "Running on QEMU (q35)\n"); - break; - default: - dprintf(1, "Running on QEMU (unknown nb: %04x:%04x)\n", v, d); - break; - } -} - -static int qemu_early_e820(void); - -void -qemu_preinit(void) -{ - qemu_detect(); - kvm_detect(); - - if (!CONFIG_QEMU) - return; - - if (runningOnXen()) { - xen_ramsize_preinit(); - return; - } - - // try read e820 table first - if (!qemu_early_e820()) { - // when it fails get memory size from nvram. - u32 rs = ((rtc_read(CMOS_MEM_EXTMEM2_LOW) << 16) - | (rtc_read(CMOS_MEM_EXTMEM2_HIGH) << 24)); - if (rs) - rs += 16 * 1024 * 1024; - else - rs = (((rtc_read(CMOS_MEM_EXTMEM_LOW) << 10) - | (rtc_read(CMOS_MEM_EXTMEM_HIGH) << 18)) - + 1 * 1024 * 1024); - RamSize = rs; - e820_add(0, rs, E820_RAM); - dprintf(1, "RamSize: 0x%08x [cmos]\n", RamSize); - } - - /* reserve 256KB BIOS area at the end of 4 GB */ - e820_add(0xfffc0000, 256*1024, E820_RESERVED); -} - -#define MSR_IA32_FEATURE_CONTROL 0x0000003a - -static void msr_feature_control_setup(void) -{ - u64 feature_control_bits = romfile_loadint("etc/msr_feature_control", 0); - if (feature_control_bits) - wrmsr_smp(MSR_IA32_FEATURE_CONTROL, feature_control_bits); -} - -void -qemu_platform_setup(void) -{ - if (!CONFIG_QEMU) - return; - - if (runningOnXen()) { - pci_probe_devices(); - xen_hypercall_setup(); - xen_biostable_setup(); - return; - } - - kvmclock_init(); - - // Initialize pci - pci_setup(); - smm_device_setup(); - smm_setup(); - - // Initialize mtrr, msr_feature_control and smp - mtrr_setup(); - msr_feature_control_setup(); - smp_setup(); - - // Create bios tables - if (MaxCountCPUs <= 255) { - pirtable_setup(); - mptable_setup(); - } - smbios_setup(); - - if (CONFIG_FW_ROMFILE_LOAD) { - int loader_err; - - dprintf(3, "load ACPI tables\n"); - - loader_err = romfile_loader_execute("etc/table-loader"); - - RsdpAddr = find_acpi_rsdp(); - - if (RsdpAddr) { - acpi_dsdt_parse(); - virtio_mmio_setup_acpi(); - return; - } - /* If present, loader should have installed an RSDP. - * Not installed? We might still be able to continue - * using the builtin RSDP. - */ - if (!loader_err) - warn_internalerror(); - } - - acpi_setup(); -} - - -/**************************************************************** - * QEMU firmware config (fw_cfg) interface - ****************************************************************/ - -// List of QEMU fw_cfg entries. DO NOT ADD MORE. (All new content -// should be passed via the fw_cfg "file" interface.) -#define QEMU_CFG_SIGNATURE 0x00 -#define QEMU_CFG_ID 0x01 -#define QEMU_CFG_UUID 0x02 -#define QEMU_CFG_NOGRAPHIC 0x04 -#define QEMU_CFG_NUMA 0x0d -#define QEMU_CFG_BOOT_MENU 0x0e -#define QEMU_CFG_NB_CPUS 0x05 -#define QEMU_CFG_MAX_CPUS 0x0f -#define QEMU_CFG_FILE_DIR 0x19 -#define QEMU_CFG_ARCH_LOCAL 0x8000 -#define QEMU_CFG_ACPI_TABLES (QEMU_CFG_ARCH_LOCAL + 0) -#define QEMU_CFG_SMBIOS_ENTRIES (QEMU_CFG_ARCH_LOCAL + 1) -#define QEMU_CFG_IRQ0_OVERRIDE (QEMU_CFG_ARCH_LOCAL + 2) -#define QEMU_CFG_E820_TABLE (QEMU_CFG_ARCH_LOCAL + 3) - -static void -qemu_cfg_select(u16 f) -{ - outw(f, PORT_QEMU_CFG_CTL); -} - -static void -qemu_cfg_dma_transfer(void *address, u32 length, u32 control) -{ - QemuCfgDmaAccess access; - - access.address = cpu_to_be64((u64)(u32)address); - access.length = cpu_to_be32(length); - access.control = cpu_to_be32(control); - - barrier(); - - outl(cpu_to_be32((u32)&access), PORT_QEMU_CFG_DMA_ADDR_LOW); - - while(be32_to_cpu(access.control) & ~QEMU_CFG_DMA_CTL_ERROR) { - yield(); - } -} - -static void -qemu_cfg_read(void *buf, int len) -{ - if (len == 0) { - return; - } - - if (qemu_cfg_dma_enabled()) { - qemu_cfg_dma_transfer(buf, len, QEMU_CFG_DMA_CTL_READ); - } else { - insb(PORT_QEMU_CFG_DATA, buf, len); - } -} - -static void -qemu_cfg_write(void *buf, int len) -{ - if (len == 0) { - return; - } - - if (qemu_cfg_dma_enabled()) { - qemu_cfg_dma_transfer(buf, len, QEMU_CFG_DMA_CTL_WRITE); - } else { - warn_internalerror(); - } -} - -static void -qemu_cfg_skip(int len) -{ - if (len == 0) { - return; - } - - if (qemu_cfg_dma_enabled()) { - qemu_cfg_dma_transfer(0, len, QEMU_CFG_DMA_CTL_SKIP); - } else { - while (len--) - inb(PORT_QEMU_CFG_DATA); - } -} - -static void -qemu_cfg_read_entry(void *buf, int e, int len) -{ - if (qemu_cfg_dma_enabled()) { - u32 control = (e << 16) | QEMU_CFG_DMA_CTL_SELECT - | QEMU_CFG_DMA_CTL_READ; - qemu_cfg_dma_transfer(buf, len, control); - } else { - qemu_cfg_select(e); - qemu_cfg_read(buf, len); - } -} - -static void -qemu_cfg_write_entry(void *buf, int e, int len) -{ - if (qemu_cfg_dma_enabled()) { - u32 control = (e << 16) | QEMU_CFG_DMA_CTL_SELECT - | QEMU_CFG_DMA_CTL_WRITE; - qemu_cfg_dma_transfer(buf, len, control); - } else { - warn_internalerror(); - } -} - -struct qemu_romfile_s { - struct romfile_s file; - int select, skip; -}; - -static int -qemu_cfg_read_file(struct romfile_s *file, void *dst, u32 maxlen) -{ - if (file->size > maxlen) - return -1; - struct qemu_romfile_s *qfile; - qfile = container_of(file, struct qemu_romfile_s, file); - if (qfile->skip == 0) { - /* Do it in one transfer */ - qemu_cfg_read_entry(dst, qfile->select, file->size); - } else { - qemu_cfg_select(qfile->select); - qemu_cfg_skip(qfile->skip); - qemu_cfg_read(dst, file->size); - } - return file->size; -} - -// Bare-bones function for writing a file knowing only its unique -// identifying key (select) -int -qemu_cfg_write_file_simple(void *src, u16 key, u32 offset, u32 len) -{ - if (offset == 0) { - /* Do it in one transfer */ - qemu_cfg_write_entry(src, key, len); - } else { - qemu_cfg_select(key); - qemu_cfg_skip(offset); - qemu_cfg_write(src, len); - } - return len; -} - -int -qemu_cfg_write_file(void *src, struct romfile_s *file, u32 offset, u32 len) -{ - if ((offset + len) > file->size) - return -1; - - if (!qemu_cfg_dma_enabled() || (file->copy != qemu_cfg_read_file)) { - warn_internalerror(); - return -1; - } - return qemu_cfg_write_file_simple(src, qemu_get_romfile_key(file), - offset, len); -} - -static void -qemu_romfile_add(char *name, int select, int skip, int size) -{ - struct qemu_romfile_s *qfile = malloc_tmp(sizeof(*qfile)); - if (!qfile) { - warn_noalloc(); - return; - } - memset(qfile, 0, sizeof(*qfile)); - strtcpy(qfile->file.name, name, sizeof(qfile->file.name)); - qfile->file.size = size; - qfile->select = select; - qfile->skip = skip; - qfile->file.copy = qemu_cfg_read_file; - romfile_add(&qfile->file); -} - -u16 -qemu_get_romfile_key(struct romfile_s *file) -{ - struct qemu_romfile_s *qfile; - if (file->copy != qemu_cfg_read_file) { - warn_internalerror(); - return 0; - } - qfile = container_of(file, struct qemu_romfile_s, file); - return qfile->select; -} - -static int rtc_present(void) -{ - return rtc_read(CMOS_RTC_MONTH) != 0xff; -} - -u16 -qemu_get_present_cpus_count(void) -{ - u16 smp_count = 0; - if (qemu_cfg_enabled()) { - qemu_cfg_read_entry(&smp_count, QEMU_CFG_NB_CPUS, sizeof(smp_count)); - } - if (rtc_present()) { - u16 cmos_cpu_count = rtc_read(CMOS_BIOS_SMP_COUNT) + 1; - if (smp_count < cmos_cpu_count) { - smp_count = cmos_cpu_count; - } - } - return smp_count; -} - -struct e820_reservation { - u64 address; - u64 length; - u32 type; -}; - -#define SMBIOS_FIELD_ENTRY 0 -#define SMBIOS_TABLE_ENTRY 1 - -struct qemu_smbios_header { - u16 length; - u8 headertype; - u8 tabletype; - u16 fieldoffset; -} PACKED; - -static void -qemu_cfg_e820(void) -{ - if (!CONFIG_QEMU) - return; - - if (romfile_find("etc/e820")) { - // qemu_early_e820() has handled everything - return; - } - - // QEMU_CFG_E820_TABLE has reservations only - u32 count32; - qemu_cfg_read_entry(&count32, QEMU_CFG_E820_TABLE, sizeof(count32)); - if (count32) { - struct e820_reservation entry; - int i; - for (i = 0; i < count32; i++) { - qemu_cfg_read(&entry, sizeof(entry)); - e820_add(entry.address, entry.length, entry.type); - } - } else if (runningOnKVM()) { - // Backwards compatibility - provide hard coded range. - // 4 pages before the bios, 3 pages for vmx tss pages, the - // other page for EPT real mode pagetable - e820_add(0xfffbc000, 4*4096, E820_RESERVED); - } - - // Check for memory over 4Gig in cmos - u64 high = ((rtc_read(CMOS_MEM_HIGHMEM_LOW) << 16) - | ((u32)rtc_read(CMOS_MEM_HIGHMEM_MID) << 24) - | ((u64)rtc_read(CMOS_MEM_HIGHMEM_HIGH) << 32)); - RamSizeOver4G = high; - e820_add(0x100000000ull, high, E820_RAM); - dprintf(1, "RamSizeOver4G: 0x%016llx [cmos]\n", RamSizeOver4G); -} - -// Populate romfile entries for legacy fw_cfg ports (that predate the -// "file" interface). -static void -qemu_cfg_legacy(void) -{ - if (!CONFIG_QEMU) - return; - - // Misc config items. - qemu_romfile_add("etc/show-boot-menu", QEMU_CFG_BOOT_MENU, 0, 2); - qemu_romfile_add("etc/irq0-override", QEMU_CFG_IRQ0_OVERRIDE, 0, 1); - qemu_romfile_add("etc/max-cpus", QEMU_CFG_MAX_CPUS, 0, 2); - - // NUMA data - u64 numacount; - qemu_cfg_read_entry(&numacount, QEMU_CFG_NUMA, sizeof(numacount)); - int max_cpu = romfile_loadint("etc/max-cpus", 0); - qemu_romfile_add("etc/numa-cpu-map", QEMU_CFG_NUMA, sizeof(numacount) - , max_cpu*sizeof(u64)); - qemu_romfile_add("etc/numa-nodes", QEMU_CFG_NUMA - , sizeof(numacount) + max_cpu*sizeof(u64) - , numacount*sizeof(u64)); - - // ACPI tables - char name[128]; - u16 cnt; - qemu_cfg_read_entry(&cnt, QEMU_CFG_ACPI_TABLES, sizeof(cnt)); - int i, offset = sizeof(cnt); - for (i = 0; i < cnt; i++) { - u16 len; - qemu_cfg_read(&len, sizeof(len)); - offset += sizeof(len); - snprintf(name, sizeof(name), "acpi/table%d", i); - qemu_romfile_add(name, QEMU_CFG_ACPI_TABLES, offset, len); - qemu_cfg_skip(len); - offset += len; - } - - // SMBIOS info - qemu_cfg_read_entry(&cnt, QEMU_CFG_SMBIOS_ENTRIES, sizeof(cnt)); - offset = sizeof(cnt); - for (i = 0; i < cnt; i++) { - struct qemu_smbios_header header; - qemu_cfg_read(&header, sizeof(header)); - if (header.headertype == SMBIOS_FIELD_ENTRY) { - snprintf(name, sizeof(name), "smbios/field%d-%d" - , header.tabletype, header.fieldoffset); - qemu_romfile_add(name, QEMU_CFG_SMBIOS_ENTRIES - , offset + sizeof(header) - , header.length - sizeof(header)); - } else { - snprintf(name, sizeof(name), "smbios/table%d-%d" - , header.tabletype, i); - qemu_romfile_add(name, QEMU_CFG_SMBIOS_ENTRIES - , offset + 3, header.length - 3); - } - qemu_cfg_skip(header.length - sizeof(header)); - offset += header.length; - } -} - -struct QemuCfgFile { - u32 size; /* file size */ - u16 select; /* write this to 0x510 to read it */ - u16 reserved; - char name[56]; -}; - -static int qemu_cfg_detect(void) -{ - if (cfg_enabled) - return 1; - - // Detect fw_cfg interface. - qemu_cfg_select(QEMU_CFG_SIGNATURE); - char *sig = "QEMU"; - int i; - for (i = 0; i < 4; i++) - if (inb(PORT_QEMU_CFG_DATA) != sig[i]) - return 0; - - dprintf(1, "Found QEMU fw_cfg\n"); - cfg_enabled = 1; - - // Detect DMA interface. - u32 id; - qemu_cfg_read_entry(&id, QEMU_CFG_ID, sizeof(id)); - - if (id & QEMU_CFG_VERSION_DMA) { - dprintf(1, "QEMU fw_cfg DMA interface supported\n"); - cfg_dma_enabled = 1; - } - return 1; -} - -void qemu_cfg_init(void) -{ - if (!runningOnQEMU()) - return; - - if (!qemu_cfg_detect()) - return; - - // Populate romfiles for legacy fw_cfg entries - qemu_cfg_legacy(); - - // Load files found in the fw_cfg file directory - u32 count; - qemu_cfg_read_entry(&count, QEMU_CFG_FILE_DIR, sizeof(count)); - count = be32_to_cpu(count); - u32 e; - for (e = 0; e < count; e++) { - struct QemuCfgFile qfile; - qemu_cfg_read(&qfile, sizeof(qfile)); - qemu_romfile_add(qfile.name, be16_to_cpu(qfile.select) - , 0, be32_to_cpu(qfile.size)); - } - - qemu_cfg_e820(); - - if (romfile_find("etc/table-loader")) { - acpi_pm_base = 0x0600; - dprintf(1, "Moving pm_base to 0x%x\n", acpi_pm_base); - } - - // serial console - u16 nogfx = 0; - qemu_cfg_read_entry(&nogfx, QEMU_CFG_NOGRAPHIC, sizeof(nogfx)); - if (nogfx && !romfile_find("etc/sercon-port") - && !romfile_find("vgaroms/sgabios.bin")) - const_romfile_add_int("etc/sercon-port", PORT_SERIAL1); -} - -/* - * This runs before malloc and romfile are ready, so we have to work - * with stack allocations and read from fw_cfg in chunks. - */ -static int qemu_early_e820(void) -{ - struct e820_reservation table; - struct QemuCfgFile qfile; - u32 select = 0, size = 0; - u32 count, i; - - if (!qemu_cfg_detect()) - return 0; - - // find e820 table - qemu_cfg_read_entry(&count, QEMU_CFG_FILE_DIR, sizeof(count)); - count = be32_to_cpu(count); - for (i = 0; i < count; i++) { - qemu_cfg_read(&qfile, sizeof(qfile)); - if (memcmp(qfile.name, "etc/e820", 9) != 0) - continue; - select = be16_to_cpu(qfile.select); - size = be32_to_cpu(qfile.size); - break; - } - if (select == 0) { - // may happen on old qemu - dprintf(1, "qemu/e820: fw_cfg file etc/e820 not found\n"); - return 0; - } - - // walk e820 table - qemu_cfg_select(select); - count = size/sizeof(table); - for (i = 0, select = 0; i < count; i++) { - qemu_cfg_read(&table, sizeof(table)); - switch (table.type) { - case E820_RESERVED: - e820_add(table.address, table.length, table.type); - dprintf(3, "qemu/e820: addr 0x%016llx len 0x%016llx [reserved]\n", - table.address, table.length); - break; - case E820_RAM: - e820_add(table.address, table.length, table.type); - dprintf(1, "qemu/e820: addr 0x%016llx len 0x%016llx [RAM]\n", - table.address, table.length); - if (table.address < 0x100000000LL) { - // below 4g - if (RamSize < table.address + table.length) - RamSize = table.address + table.length; - } else { - // above 4g - if (RamSizeOver4G < table.address + table.length - 0x100000000LL) - RamSizeOver4G = table.address + table.length - 0x100000000LL; - } - } - } - - dprintf(3, "qemu/e820: RamSize: 0x%08x\n", RamSize); - dprintf(3, "qemu/e820: RamSizeOver4G: 0x%016llx\n", RamSizeOver4G); - return 1; -} diff --git a/payloads/external/SeaBIOS/src/fw/paravirt.h b/payloads/external/SeaBIOS/src/fw/paravirt.h deleted file mode 100644 index 4e2e993b..00000000 --- a/payloads/external/SeaBIOS/src/fw/paravirt.h +++ /dev/null @@ -1,78 +0,0 @@ -#ifndef __PV_H -#define __PV_H - -#include "config.h" // CONFIG_* -#include "biosvar.h" // GET_GLOBAL -#include "romfile.h" // struct romfile_s - -// kvmclock -struct pvclock_vcpu_time_info { - u32 version; - u32 pad0; - u64 tsc_timestamp; - u64 system_time; - u32 tsc_to_system_mul; - s8 tsc_shift; - u8 flags; - u8 pad[2]; -} __attribute__((__packed__)); /* 32 bytes */ - -// Types of paravirtualized platforms. -#define PF_QEMU (1<<0) -#define PF_XEN (1<<1) -#define PF_KVM (1<<2) - -typedef struct QemuCfgDmaAccess { - u32 control; - u32 length; - u64 address; -} PACKED QemuCfgDmaAccess; - -extern u32 RamSize; -extern u64 RamSizeOver4G; -extern int PlatformRunningOn; - -static inline int runningOnQEMU(void) { - return CONFIG_QEMU || ( - CONFIG_QEMU_HARDWARE && GET_GLOBAL(PlatformRunningOn) & PF_QEMU); -} -static inline int runningOnXen(void) { - return CONFIG_XEN && GET_GLOBAL(PlatformRunningOn) & PF_XEN; -} -static inline int runningOnKVM(void) { - return CONFIG_QEMU && GET_GLOBAL(PlatformRunningOn) & PF_KVM; -} - -// Common paravirt ports. -#define PORT_SMI_CMD 0x00b2 -#define PORT_SMI_STATUS 0x00b3 -#define PORT_QEMU_CFG_CTL 0x0510 -#define PORT_QEMU_CFG_DATA 0x0511 -#define PORT_QEMU_CFG_DMA_ADDR_HIGH 0x0514 -#define PORT_QEMU_CFG_DMA_ADDR_LOW 0x0518 - -// QEMU_CFG_DMA_CONTROL bits -#define QEMU_CFG_DMA_CTL_ERROR 0x01 -#define QEMU_CFG_DMA_CTL_READ 0x02 -#define QEMU_CFG_DMA_CTL_SKIP 0x04 -#define QEMU_CFG_DMA_CTL_SELECT 0x08 -#define QEMU_CFG_DMA_CTL_WRITE 0x10 - -// QEMU_CFG_DMA ID bit -#define QEMU_CFG_VERSION_DMA 2 - -// QEMU debugcon read value -#define QEMU_DEBUGCON_READBACK 0xe9 - -int qemu_cfg_enabled(void); -int qemu_cfg_dma_enabled(void); -void qemu_preinit(void); -void qemu_platform_setup(void); -void qemu_cfg_init(void); - -u16 qemu_get_present_cpus_count(void); -int qemu_cfg_write_file(void *src, struct romfile_s *file, u32 offset, u32 len); -int qemu_cfg_write_file_simple(void *src, u16 key, u32 offset, u32 len); -u16 qemu_get_romfile_key(struct romfile_s *file); - -#endif diff --git a/payloads/external/SeaBIOS/src/fw/pciinit.c b/payloads/external/SeaBIOS/src/fw/pciinit.c deleted file mode 100644 index d25931bb..00000000 --- a/payloads/external/SeaBIOS/src/fw/pciinit.c +++ /dev/null @@ -1,1185 +0,0 @@ -// Initialize PCI devices (on emulators) -// -// Copyright (C) 2008 Kevin O'Connor <kevin@koconnor.net> -// Copyright (C) 2006 Fabrice Bellard -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "byteorder.h" // le64_to_cpu -#include "config.h" // CONFIG_* -#include "dev-q35.h" // Q35_HOST_BRIDGE_PCIEXBAR_ADDR -#include "dev-piix.h" // PIIX_* -#include "e820map.h" // e820_add -#include "hw/ata.h" // PORT_ATA1_CMD_BASE -#include "hw/pci.h" // pci_config_readl -#include "hw/pcidevice.h" // pci_probe_devices -#include "hw/pci_ids.h" // PCI_VENDOR_ID_INTEL -#include "hw/pci_regs.h" // PCI_COMMAND -#include "fw/dev-pci.h" // REDHAT_CAP_RESOURCE_RESERVE -#include "list.h" // struct hlist_node -#include "malloc.h" // free -#include "output.h" // dprintf -#include "paravirt.h" // RamSize -#include "romfile.h" // romfile_loadint -#include "string.h" // memset -#include "util.h" // pci_setup -#include "x86.h" // outb - -#define PCI_DEVICE_MEM_MIN (1<<12) // 4k == page size -#define PCI_BRIDGE_MEM_MIN (1<<21) // 2M == hugepage size -#define PCI_BRIDGE_IO_MIN 0x1000 // mandated by pci bridge spec - -#define PCI_ROM_SLOT 6 -#define PCI_NUM_REGIONS 7 -#define PCI_BRIDGE_NUM_REGIONS 2 - -enum pci_region_type { - PCI_REGION_TYPE_IO, - PCI_REGION_TYPE_MEM, - PCI_REGION_TYPE_PREFMEM, - PCI_REGION_TYPE_COUNT, -}; - -static const char *region_type_name[] = { - [ PCI_REGION_TYPE_IO ] = "io", - [ PCI_REGION_TYPE_MEM ] = "mem", - [ PCI_REGION_TYPE_PREFMEM ] = "prefmem", -}; - -u64 pcimem_start = BUILD_PCIMEM_START; -u64 pcimem_end = BUILD_PCIMEM_END; -u64 pcimem64_start = BUILD_PCIMEM64_START; -u64 pcimem64_end = BUILD_PCIMEM64_END; -u64 pci_io_low_end = 0xa000; - -struct pci_region_entry { - struct pci_device *dev; - int bar; - u64 size; - u64 align; - int is64; - enum pci_region_type type; - struct hlist_node node; -}; - -struct pci_region { - /* pci region assignments */ - u64 base; - struct hlist_head list; -}; - -struct pci_bus { - struct pci_region r[PCI_REGION_TYPE_COUNT]; - struct pci_device *bus_dev; -}; - -static u32 pci_bar(struct pci_device *pci, int region_num) -{ - if (region_num != PCI_ROM_SLOT) { - return PCI_BASE_ADDRESS_0 + region_num * 4; - } - -#define PCI_HEADER_TYPE_MULTI_FUNCTION 0x80 - u8 type = pci->header_type & ~PCI_HEADER_TYPE_MULTI_FUNCTION; - return type == PCI_HEADER_TYPE_BRIDGE ? PCI_ROM_ADDRESS1 : PCI_ROM_ADDRESS; -} - -static void -pci_set_io_region_addr(struct pci_device *pci, int bar, u64 addr, int is64) -{ - u32 ofs = pci_bar(pci, bar); - pci_config_writel(pci->bdf, ofs, addr); - if (is64) - pci_config_writel(pci->bdf, ofs + 4, addr >> 32); -} - - -/**************************************************************** - * Misc. device init - ****************************************************************/ - -/* host irqs corresponding to PCI irqs A-D */ -const u8 pci_irqs[4] = { - 10, 10, 11, 11 -}; - -static int dummy_pci_slot_get_irq(struct pci_device *pci, int pin) -{ - dprintf(1, "pci_slot_get_irq called with unknown routing\n"); - - return 0xff; /* PCI defined "unknown" or "no connection" for x86 */ -} - -static int (*pci_slot_get_irq)(struct pci_device *pci, int pin) = - dummy_pci_slot_get_irq; - -// Return the global irq number corresponding to a host bus device irq pin. -static int piix_pci_slot_get_irq(struct pci_device *pci, int pin) -{ - int slot_addend = 0; - - while (pci->parent != NULL) { - slot_addend += pci_bdf_to_dev(pci->bdf); - pci = pci->parent; - } - slot_addend += pci_bdf_to_dev(pci->bdf) - 1; - return pci_irqs[(pin - 1 + slot_addend) & 3]; -} - -static int mch_pci_slot_get_irq(struct pci_device *pci, int pin) -{ - int pin_addend = 0; - while (pci->parent != NULL) { - pin_addend += pci_bdf_to_dev(pci->bdf); - pci = pci->parent; - } - u8 slot = pci_bdf_to_dev(pci->bdf); - if (slot <= 24) - /* Slots 0-24 rotate slot:pin mapping similar to piix above, but - with a different starting index - see q35-acpi-dsdt.dsl */ - return pci_irqs[(pin - 1 + pin_addend + slot) & 3]; - /* Slots 25-31 all use LNKA mapping (or LNKE, but A:D = E:H) */ - return pci_irqs[(pin - 1 + pin_addend) & 3]; -} - -/* PIIX3/PIIX4 PCI to ISA bridge */ -static void piix_isa_bridge_setup(struct pci_device *pci, void *arg) -{ - int i, irq; - u8 elcr[2]; - - elcr[0] = 0x00; - elcr[1] = 0x00; - for (i = 0; i < 4; i++) { - irq = pci_irqs[i]; - /* set to trigger level */ - elcr[irq >> 3] |= (1 << (irq & 7)); - /* activate irq remapping in PIIX */ - pci_config_writeb(pci->bdf, 0x60 + i, irq); - } - outb(elcr[0], PIIX_PORT_ELCR1); - outb(elcr[1], PIIX_PORT_ELCR2); - dprintf(1, "PIIX3/PIIX4 init: elcr=%02x %02x\n", elcr[0], elcr[1]); -} - -static void mch_isa_lpc_setup(u16 bdf) -{ - /* pm io base */ - pci_config_writel(bdf, ICH9_LPC_PMBASE, - acpi_pm_base | ICH9_LPC_PMBASE_RTE); - - /* acpi enable, SCI: IRQ9 000b = irq9*/ - pci_config_writeb(bdf, ICH9_LPC_ACPI_CTRL, ICH9_LPC_ACPI_CTRL_ACPI_EN); - - /* set root complex register block BAR */ - pci_config_writel(bdf, ICH9_LPC_RCBA, - ICH9_LPC_RCBA_ADDR | ICH9_LPC_RCBA_EN); -} - -static int ICH9LpcBDF = -1; - -/* ICH9 LPC PCI to ISA bridge */ -/* PCI_VENDOR_ID_INTEL && PCI_DEVICE_ID_INTEL_ICH9_LPC */ -static void mch_isa_bridge_setup(struct pci_device *dev, void *arg) -{ - u16 bdf = dev->bdf; - int i, irq; - u8 elcr[2]; - - elcr[0] = 0x00; - elcr[1] = 0x00; - - for (i = 0; i < 4; i++) { - irq = pci_irqs[i]; - /* set to trigger level */ - elcr[irq >> 3] |= (1 << (irq & 7)); - - /* activate irq remapping in LPC */ - - /* PIRQ[A-D] routing */ - pci_config_writeb(bdf, ICH9_LPC_PIRQA_ROUT + i, irq); - /* PIRQ[E-H] routing */ - pci_config_writeb(bdf, ICH9_LPC_PIRQE_ROUT + i, irq); - } - outb(elcr[0], ICH9_LPC_PORT_ELCR1); - outb(elcr[1], ICH9_LPC_PORT_ELCR2); - dprintf(1, "Q35 LPC init: elcr=%02x %02x\n", elcr[0], elcr[1]); - - ICH9LpcBDF = bdf; - - mch_isa_lpc_setup(bdf); - - e820_add(ICH9_LPC_RCBA_ADDR, 16*1024, E820_RESERVED); - - acpi_pm1a_cnt = acpi_pm_base + 0x04; - pmtimer_setup(acpi_pm_base + 0x08); -} - -static void storage_ide_setup(struct pci_device *pci, void *arg) -{ - /* IDE: we map it as in ISA mode */ - pci_set_io_region_addr(pci, 0, PORT_ATA1_CMD_BASE, 0); - pci_set_io_region_addr(pci, 1, PORT_ATA1_CTRL_BASE, 0); - pci_set_io_region_addr(pci, 2, PORT_ATA2_CMD_BASE, 0); - pci_set_io_region_addr(pci, 3, PORT_ATA2_CTRL_BASE, 0); -} - -/* PIIX3/PIIX4 IDE */ -static void piix_ide_setup(struct pci_device *pci, void *arg) -{ - u16 bdf = pci->bdf; - pci_config_writew(bdf, 0x40, 0x8000); // enable IDE0 - pci_config_writew(bdf, 0x42, 0x8000); // enable IDE1 -} - -static void pic_ibm_setup(struct pci_device *pci, void *arg) -{ - /* PIC, IBM, MPIC & MPIC2 */ - pci_set_io_region_addr(pci, 0, 0x80800000 + 0x00040000, 0); -} - -static void apple_macio_setup(struct pci_device *pci, void *arg) -{ - /* macio bridge */ - pci_set_io_region_addr(pci, 0, 0x80800000, 0); -} - -static void piix4_pm_config_setup(u16 bdf) -{ - // acpi sci is hardwired to 9 - pci_config_writeb(bdf, PCI_INTERRUPT_LINE, 9); - - pci_config_writel(bdf, PIIX_PMBASE, acpi_pm_base | 1); - pci_config_writeb(bdf, PIIX_PMREGMISC, 0x01); /* enable PM io space */ - pci_config_writel(bdf, PIIX_SMBHSTBASE, (acpi_pm_base + 0x100) | 1); - pci_config_writeb(bdf, PIIX_SMBHSTCFG, 0x09); /* enable SMBus io space */ -} - -static int PiixPmBDF = -1; - -/* PIIX4 Power Management device (for ACPI) */ -static void piix4_pm_setup(struct pci_device *pci, void *arg) -{ - PiixPmBDF = pci->bdf; - piix4_pm_config_setup(pci->bdf); - - acpi_pm1a_cnt = acpi_pm_base + 0x04; - pmtimer_setup(acpi_pm_base + 0x08); -} - -static void ich9_smbus_enable(u16 bdf) -{ - /* map smbus into io space */ - pci_config_writel(bdf, ICH9_SMB_SMB_BASE, - (acpi_pm_base + 0x100) | PCI_BASE_ADDRESS_SPACE_IO); - - /* enable SMBus */ - pci_config_writeb(bdf, ICH9_SMB_HOSTC, ICH9_SMB_HOSTC_HST_EN); -} - -static int ICH9SmbusBDF = -1; - -/* ICH9 SMBUS */ -/* PCI_VENDOR_ID_INTEL && PCI_DEVICE_ID_INTEL_ICH9_SMBUS */ -static void ich9_smbus_setup(struct pci_device *dev, void *arg) -{ - ICH9SmbusBDF = dev->bdf; - - ich9_smbus_enable(dev->bdf); -} - -static void intel_igd_setup(struct pci_device *dev, void *arg) -{ - struct romfile_s *opregion = romfile_find("etc/igd-opregion"); - u64 bdsm_size = le64_to_cpu(romfile_loadint("etc/igd-bdsm-size", 0)); - - /* Apply OpRegion to any Intel VGA device, more than one is undefined */ - if (opregion && opregion->size) { - void *addr = memalign_high(PAGE_SIZE, opregion->size); - if (!addr) { - warn_noalloc(); - return; - } - - if (opregion->copy(opregion, addr, opregion->size) < 0) { - free(addr); - return; - } - - pci_config_writel(dev->bdf, 0xFC, cpu_to_le32((u32)addr)); - - dprintf(1, "Intel IGD OpRegion enabled at 0x%08x, size %dKB, dev %pP\n" - , (u32)addr, opregion->size >> 10, dev); - } - - /* Apply BDSM only to Intel VGA at 00:02.0 */ - if (bdsm_size && (dev->bdf == pci_to_bdf(0, 2, 0))) { - void *addr = memalign_tmphigh(1024 * 1024, bdsm_size); - if (!addr) { - warn_noalloc(); - return; - } - - e820_add((u32)addr, bdsm_size, E820_RESERVED); - - pci_config_writel(dev->bdf, 0x5C, cpu_to_le32((u32)addr)); - - dprintf(1, "Intel IGD BDSM enabled at 0x%08x, size %lldMB, dev %pP\n" - , (u32)addr, bdsm_size >> 20, dev); - } -} - -static const struct pci_device_id pci_device_tbl[] = { - /* PIIX3/PIIX4 PCI to ISA bridge */ - PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371SB_0, - piix_isa_bridge_setup), - PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_0, - piix_isa_bridge_setup), - PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_LPC, - mch_isa_bridge_setup), - - /* STORAGE IDE */ - PCI_DEVICE_CLASS(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371SB_1, - PCI_CLASS_STORAGE_IDE, piix_ide_setup), - PCI_DEVICE_CLASS(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB, - PCI_CLASS_STORAGE_IDE, piix_ide_setup), - PCI_DEVICE_CLASS(PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE, - storage_ide_setup), - - /* PIC, IBM, MPIC & MPIC2 */ - PCI_DEVICE_CLASS(PCI_VENDOR_ID_IBM, 0x0046, PCI_CLASS_SYSTEM_PIC, - pic_ibm_setup), - PCI_DEVICE_CLASS(PCI_VENDOR_ID_IBM, 0xFFFF, PCI_CLASS_SYSTEM_PIC, - pic_ibm_setup), - - /* PIIX4 Power Management device (for ACPI) */ - PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3, - piix4_pm_setup), - PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_SMBUS, - ich9_smbus_setup), - - /* 0xff00 */ - PCI_DEVICE_CLASS(PCI_VENDOR_ID_APPLE, 0x0017, 0xff00, apple_macio_setup), - PCI_DEVICE_CLASS(PCI_VENDOR_ID_APPLE, 0x0022, 0xff00, apple_macio_setup), - - /* Intel IGD OpRegion setup */ - PCI_DEVICE_CLASS(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA, - intel_igd_setup), - - PCI_DEVICE_END, -}; - -static int MCHMmcfgBDF = -1; -static void mch_mmconfig_setup(u16 bdf); - -void pci_resume(void) -{ - if (!CONFIG_QEMU) { - return; - } - - if (PiixPmBDF >= 0) { - piix4_pm_config_setup(PiixPmBDF); - } - - if (ICH9LpcBDF >= 0) { - mch_isa_lpc_setup(ICH9LpcBDF); - } - - if (ICH9SmbusBDF >= 0) { - ich9_smbus_enable(ICH9SmbusBDF); - } - - if(MCHMmcfgBDF >= 0) { - mch_mmconfig_setup(MCHMmcfgBDF); - } -} - -static void pci_bios_init_device(struct pci_device *pci) -{ - dprintf(1, "PCI: init bdf=%pP id=%04x:%04x\n" - , pci, pci->vendor, pci->device); - - /* map the interrupt */ - u16 bdf = pci->bdf; - int pin = pci_config_readb(bdf, PCI_INTERRUPT_PIN); - if (pin != 0) - pci_config_writeb(bdf, PCI_INTERRUPT_LINE, pci_slot_get_irq(pci, pin)); - - pci_init_device(pci_device_tbl, pci, NULL); - - /* enable memory mappings */ - pci_config_maskw(bdf, PCI_COMMAND, 0, - PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_SERR); - /* enable SERR# for forwarding */ - if (pci->header_type & PCI_HEADER_TYPE_BRIDGE) - pci_config_maskw(bdf, PCI_BRIDGE_CONTROL, 0, - PCI_BRIDGE_CTL_SERR); -} - -static void pci_bios_init_devices(void) -{ - struct pci_device *pci; - foreachpci(pci) { - pci_bios_init_device(pci); - } -} - -static void pci_enable_default_vga(void) -{ - struct pci_device *pci; - - foreachpci(pci) { - if (is_pci_vga(pci)) { - dprintf(1, "PCI: Using %pP for primary VGA\n", pci); - return; - } - } - - pci = pci_find_class(PCI_CLASS_DISPLAY_VGA); - if (!pci) { - dprintf(1, "PCI: No VGA devices found\n"); - return; - } - - dprintf(1, "PCI: Enabling %pP for primary VGA\n", pci); - - pci_config_maskw(pci->bdf, PCI_COMMAND, 0, - PCI_COMMAND_IO | PCI_COMMAND_MEMORY); - - while (pci->parent) { - pci = pci->parent; - - dprintf(1, "PCI: Setting VGA enable on bridge %pP\n", pci); - - pci_config_maskw(pci->bdf, PCI_BRIDGE_CONTROL, 0, PCI_BRIDGE_CTL_VGA); - pci_config_maskw(pci->bdf, PCI_COMMAND, 0, - PCI_COMMAND_IO | PCI_COMMAND_MEMORY); - } -} - -/**************************************************************** - * Platform device initialization - ****************************************************************/ - -static void i440fx_mem_addr_setup(struct pci_device *dev, void *arg) -{ - if (RamSize <= 0x80000000) - pcimem_start = 0x80000000; - else if (RamSize <= 0xc0000000) - pcimem_start = 0xc0000000; - - pci_slot_get_irq = piix_pci_slot_get_irq; -} - -static void mch_mmconfig_setup(u16 bdf) -{ - u64 addr = Q35_HOST_BRIDGE_PCIEXBAR_ADDR; - u32 upper = addr >> 32; - u32 lower = (addr & 0xffffffff) | Q35_HOST_BRIDGE_PCIEXBAREN; - pci_config_writel(bdf, Q35_HOST_BRIDGE_PCIEXBAR, 0); - pci_config_writel(bdf, Q35_HOST_BRIDGE_PCIEXBAR + 4, upper); - pci_config_writel(bdf, Q35_HOST_BRIDGE_PCIEXBAR, lower); - pci_enable_mmconfig(Q35_HOST_BRIDGE_PCIEXBAR_ADDR, "q35"); -} - -static void mch_mem_addr_setup(struct pci_device *dev, void *arg) -{ - u64 addr = Q35_HOST_BRIDGE_PCIEXBAR_ADDR; - u32 size = Q35_HOST_BRIDGE_PCIEXBAR_SIZE; - - /* setup mmconfig */ - MCHMmcfgBDF = dev->bdf; - mch_mmconfig_setup(dev->bdf); - e820_add(addr, size, E820_RESERVED); - - /* setup pci i/o window (above mmconfig) */ - pcimem_start = addr + size; - - pci_slot_get_irq = mch_pci_slot_get_irq; - - /* setup io address space */ - if (acpi_pm_base < 0x1000) - pci_io_low_end = 0x10000; - else - pci_io_low_end = acpi_pm_base; -} - -static const struct pci_device_id pci_platform_tbl[] = { - PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82441, - i440fx_mem_addr_setup), - PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_Q35_MCH, - mch_mem_addr_setup), - PCI_DEVICE_END -}; - -static void pci_bios_init_platform(void) -{ - struct pci_device *pci; - foreachpci(pci) { - pci_init_device(pci_platform_tbl, pci, NULL); - } -} - -static u8 pci_find_resource_reserve_capability(u16 bdf) -{ - u16 device_id; - - if (pci_config_readw(bdf, PCI_VENDOR_ID) != PCI_VENDOR_ID_REDHAT) { - dprintf(3, "PCI: This is non-QEMU bridge.\n"); - return 0; - } - - device_id = pci_config_readw(bdf, PCI_DEVICE_ID); - - if (device_id != PCI_DEVICE_ID_REDHAT_ROOT_PORT && - device_id != PCI_DEVICE_ID_REDHAT_BRIDGE) { - dprintf(1, "PCI: QEMU resource reserve cap device ID doesn't match.\n"); - return 0; - } - u8 cap = 0; - - do { - cap = pci_find_capability(bdf, PCI_CAP_ID_VNDR, cap); - } while (cap && - pci_config_readb(bdf, cap + PCI_CAP_REDHAT_TYPE_OFFSET) != - REDHAT_CAP_RESOURCE_RESERVE); - if (cap) { - u8 cap_len = pci_config_readb(bdf, cap + PCI_CAP_FLAGS); - if (cap_len < RES_RESERVE_CAP_SIZE) { - dprintf(1, "PCI: QEMU resource reserve cap length %d is invalid\n", - cap_len); - return 0; - } - } else { - dprintf(1, "PCI: QEMU resource reserve cap not found\n"); - } - return cap; -} - -/**************************************************************** - * Bus initialization - ****************************************************************/ - -static void -pci_bios_init_bus_rec(int bus, u8 *pci_bus) -{ - int bdf; - u16 class; - - dprintf(1, "PCI: %s bus = 0x%x\n", __func__, bus); - - /* prevent accidental access to unintended devices */ - foreachbdf(bdf, bus) { - class = pci_config_readw(bdf, PCI_CLASS_DEVICE); - if (class == PCI_CLASS_BRIDGE_PCI) { - pci_config_writeb(bdf, PCI_SECONDARY_BUS, 255); - pci_config_writeb(bdf, PCI_SUBORDINATE_BUS, 0); - } - } - - foreachbdf(bdf, bus) { - class = pci_config_readw(bdf, PCI_CLASS_DEVICE); - if (class != PCI_CLASS_BRIDGE_PCI) { - continue; - } - dprintf(1, "PCI: %s bdf = 0x%x\n", __func__, bdf); - - u8 pribus = pci_config_readb(bdf, PCI_PRIMARY_BUS); - if (pribus != bus) { - dprintf(1, "PCI: primary bus = 0x%x -> 0x%x\n", pribus, bus); - pci_config_writeb(bdf, PCI_PRIMARY_BUS, bus); - } else { - dprintf(1, "PCI: primary bus = 0x%x\n", pribus); - } - - u8 secbus = pci_config_readb(bdf, PCI_SECONDARY_BUS); - (*pci_bus)++; - if (*pci_bus != secbus) { - dprintf(1, "PCI: secondary bus = 0x%x -> 0x%x\n", - secbus, *pci_bus); - secbus = *pci_bus; - pci_config_writeb(bdf, PCI_SECONDARY_BUS, secbus); - } else { - dprintf(1, "PCI: secondary bus = 0x%x\n", secbus); - } - - /* set to max for access to all subordinate buses. - later set it to accurate value */ - u8 subbus = pci_config_readb(bdf, PCI_SUBORDINATE_BUS); - pci_config_writeb(bdf, PCI_SUBORDINATE_BUS, 255); - - pci_bios_init_bus_rec(secbus, pci_bus); - - if (subbus != *pci_bus) { - u8 res_bus = *pci_bus; - u8 cap = pci_find_resource_reserve_capability(bdf); - - if (cap) { - u32 tmp_res_bus = pci_config_readl(bdf, - cap + RES_RESERVE_BUS_RES); - if (tmp_res_bus != (u32)-1) { - res_bus = tmp_res_bus & 0xFF; - if ((u8)(res_bus + secbus) < secbus || - (u8)(res_bus + secbus) < res_bus) { - dprintf(1, "PCI: bus_reserve value %d is invalid\n", - res_bus); - res_bus = 0; - } - if (secbus + res_bus > *pci_bus) { - dprintf(1, "PCI: QEMU resource reserve cap: bus = %u\n", - res_bus); - res_bus = secbus + res_bus; - } - } - } - dprintf(1, "PCI: subordinate bus = 0x%x -> 0x%x\n", - subbus, res_bus); - subbus = res_bus; - *pci_bus = res_bus; - } else { - dprintf(1, "PCI: subordinate bus = 0x%x\n", subbus); - } - pci_config_writeb(bdf, PCI_SUBORDINATE_BUS, subbus); - } -} - -static void -pci_bios_init_bus(void) -{ - u8 extraroots = romfile_loadint("etc/extra-pci-roots", 0); - u8 pci_bus = 0; - - pci_bios_init_bus_rec(0 /* host bus */, &pci_bus); - - if (extraroots) { - while (pci_bus < 0xff) { - pci_bus++; - pci_bios_init_bus_rec(pci_bus, &pci_bus); - } - } -} - - -/**************************************************************** - * Bus sizing - ****************************************************************/ - -static void -pci_bios_get_bar(struct pci_device *pci, int bar, - int *ptype, u64 *psize, int *pis64) -{ - u32 ofs = pci_bar(pci, bar); - u16 bdf = pci->bdf; - u32 old = pci_config_readl(bdf, ofs); - int is64 = 0, type = PCI_REGION_TYPE_MEM; - u64 mask; - - if (bar == PCI_ROM_SLOT) { - mask = PCI_ROM_ADDRESS_MASK; - pci_config_writel(bdf, ofs, mask); - } else { - if (old & PCI_BASE_ADDRESS_SPACE_IO) { - mask = PCI_BASE_ADDRESS_IO_MASK; - type = PCI_REGION_TYPE_IO; - } else { - mask = PCI_BASE_ADDRESS_MEM_MASK; - if (old & PCI_BASE_ADDRESS_MEM_PREFETCH) - type = PCI_REGION_TYPE_PREFMEM; - is64 = ((old & PCI_BASE_ADDRESS_MEM_TYPE_MASK) - == PCI_BASE_ADDRESS_MEM_TYPE_64); - } - pci_config_writel(bdf, ofs, ~0); - } - u64 val = pci_config_readl(bdf, ofs); - pci_config_writel(bdf, ofs, old); - if (is64) { - u32 hold = pci_config_readl(bdf, ofs + 4); - pci_config_writel(bdf, ofs + 4, ~0); - u32 high = pci_config_readl(bdf, ofs + 4); - pci_config_writel(bdf, ofs + 4, hold); - val |= ((u64)high << 32); - mask |= ((u64)0xffffffff << 32); - *psize = (~(val & mask)) + 1; - } else { - *psize = ((~(val & mask)) + 1) & 0xffffffff; - } - *ptype = type; - *pis64 = is64; -} - -static int pci_bios_bridge_region_is64(struct pci_region *r, - struct pci_device *pci, int type) -{ - if (type != PCI_REGION_TYPE_PREFMEM) - return 0; - u32 pmem = pci_config_readl(pci->bdf, PCI_PREF_MEMORY_BASE); - if (!pmem) { - pci_config_writel(pci->bdf, PCI_PREF_MEMORY_BASE, 0xfff0fff0); - pmem = pci_config_readl(pci->bdf, PCI_PREF_MEMORY_BASE); - pci_config_writel(pci->bdf, PCI_PREF_MEMORY_BASE, 0x0); - } - if ((pmem & PCI_PREF_RANGE_TYPE_MASK) != PCI_PREF_RANGE_TYPE_64) - return 0; - struct pci_region_entry *entry; - hlist_for_each_entry(entry, &r->list, node) { - if (!entry->is64) - return 0; - } - return 1; -} - -static u64 pci_region_align(struct pci_region *r) -{ - struct pci_region_entry *entry; - hlist_for_each_entry(entry, &r->list, node) { - // The first entry in the sorted list has the largest alignment - return entry->align; - } - return 1; -} - -static u64 pci_region_sum(struct pci_region *r) -{ - u64 sum = 0; - struct pci_region_entry *entry; - hlist_for_each_entry(entry, &r->list, node) { - sum += entry->size; - } - return sum; -} - -static void pci_region_migrate_64bit_entries(struct pci_region *from, - struct pci_region *to) -{ - struct hlist_node *n, **last = &to->list.first; - struct pci_region_entry *entry; - hlist_for_each_entry_safe(entry, n, &from->list, node) { - if (!entry->is64) - continue; - if (entry->dev->class == PCI_CLASS_SERIAL_USB) - continue; - // Move from source list to destination list. - hlist_del(&entry->node); - hlist_add(&entry->node, last); - last = &entry->node.next; - } -} - -static struct pci_region_entry * -pci_region_create_entry(struct pci_bus *bus, struct pci_device *dev, - int bar, u64 size, u64 align, int type, int is64) -{ - struct pci_region_entry *entry = malloc_tmp(sizeof(*entry)); - if (!entry) { - warn_noalloc(); - return NULL; - } - memset(entry, 0, sizeof(*entry)); - entry->dev = dev; - entry->bar = bar; - entry->size = size; - entry->align = align; - entry->is64 = is64; - entry->type = type; - // Insert into list in sorted order. - struct hlist_node **pprev; - struct pci_region_entry *pos; - hlist_for_each_entry_pprev(pos, pprev, &bus->r[type].list, node) { - if (pos->align < align || (pos->align == align && pos->size < size)) - break; - } - hlist_add(&entry->node, pprev); - return entry; -} - -static int pci_bus_hotplug_support(struct pci_bus *bus, u8 pcie_cap) -{ - u8 shpc_cap; - - if (pcie_cap) { - u16 pcie_flags = pci_config_readw(bus->bus_dev->bdf, - pcie_cap + PCI_EXP_FLAGS); - u8 port_type = ((pcie_flags & PCI_EXP_FLAGS_TYPE) >> - (__builtin_ffs(PCI_EXP_FLAGS_TYPE) - 1)); - u8 downstream_port = (port_type == PCI_EXP_TYPE_DOWNSTREAM) || - (port_type == PCI_EXP_TYPE_ROOT_PORT); - /* - * PCI Express SPEC, 7.8.2: - * Slot Implemented – When Set, this bit indicates that the Link - * HwInit associated with this Port is connected to a slot (as - * compared to being connected to a system-integrated device or - * being disabled). - * This bit is valid for Downstream Ports. This bit is undefined - * for Upstream Ports. - */ - u16 slot_implemented = pcie_flags & PCI_EXP_FLAGS_SLOT; - - return downstream_port && slot_implemented; - } - - shpc_cap = pci_find_capability(bus->bus_dev->bdf, PCI_CAP_ID_SHPC, 0); - return !!shpc_cap; -} - -/* Test whether bridge support forwarding of transactions - * of a specific type. - * Note: disables bridge's window registers as a side effect. - */ -static int pci_bridge_has_region(struct pci_device *pci, - enum pci_region_type region_type) -{ - u8 base; - - switch (region_type) { - case PCI_REGION_TYPE_IO: - base = PCI_IO_BASE; - break; - case PCI_REGION_TYPE_PREFMEM: - base = PCI_PREF_MEMORY_BASE; - break; - default: - /* Regular memory support is mandatory */ - return 1; - } - - pci_config_writeb(pci->bdf, base, 0xFF); - - return pci_config_readb(pci->bdf, base) != 0; -} - -static int pci_bios_check_devices(struct pci_bus *busses) -{ - dprintf(1, "PCI: check devices\n"); - - // Calculate resources needed for regular (non-bus) devices. - struct pci_device *pci; - foreachpci(pci) { - if (pci->class == PCI_CLASS_BRIDGE_PCI) - busses[pci->secondary_bus].bus_dev = pci; - - struct pci_bus *bus = &busses[pci_bdf_to_bus(pci->bdf)]; - if (!bus->bus_dev) - /* - * Resources for all root busses go in busses[0] - */ - bus = &busses[0]; - int i; - for (i = 0; i < PCI_NUM_REGIONS; i++) { - if ((pci->class == PCI_CLASS_BRIDGE_PCI) && - (i >= PCI_BRIDGE_NUM_REGIONS && i < PCI_ROM_SLOT)) - continue; - int type, is64; - u64 size; - pci_bios_get_bar(pci, i, &type, &size, &is64); - if (size == 0) - continue; - - if (type != PCI_REGION_TYPE_IO && size < PCI_DEVICE_MEM_MIN) - size = PCI_DEVICE_MEM_MIN; - struct pci_region_entry *entry = pci_region_create_entry( - bus, pci, i, size, size, type, is64); - if (!entry) - return -1; - - if (is64) - i++; - } - } - - // Propagate required bus resources to parent busses. - int secondary_bus; - for (secondary_bus=MaxPCIBus; secondary_bus>0; secondary_bus--) { - struct pci_bus *s = &busses[secondary_bus]; - if (!s->bus_dev) - continue; - struct pci_bus *parent = &busses[pci_bdf_to_bus(s->bus_dev->bdf)]; - if (!parent->bus_dev) - /* - * Resources for all root busses go in busses[0] - */ - parent = &busses[0]; - int type; - u16 bdf = s->bus_dev->bdf; - u8 pcie_cap = pci_find_capability(bdf, PCI_CAP_ID_EXP, 0); - u8 qemu_cap = pci_find_resource_reserve_capability(bdf); - - int hotplug_support = pci_bus_hotplug_support(s, pcie_cap); - for (type = 0; type < PCI_REGION_TYPE_COUNT; type++) { - u64 align = (type == PCI_REGION_TYPE_IO) ? - PCI_BRIDGE_IO_MIN : PCI_BRIDGE_MEM_MIN; - if (!pci_bridge_has_region(s->bus_dev, type)) - continue; - u64 size = 0; - if (qemu_cap) { - u32 tmp_size; - u64 tmp_size_64; - switch(type) { - case PCI_REGION_TYPE_IO: - tmp_size_64 = (pci_config_readl(bdf, qemu_cap + RES_RESERVE_IO) | - (u64)pci_config_readl(bdf, qemu_cap + RES_RESERVE_IO + 4) << 32); - if (tmp_size_64 != (u64)-1) { - size = tmp_size_64; - } - break; - case PCI_REGION_TYPE_MEM: - tmp_size = pci_config_readl(bdf, qemu_cap + RES_RESERVE_MEM); - if (tmp_size != (u32)-1) { - size = tmp_size; - } - break; - case PCI_REGION_TYPE_PREFMEM: - tmp_size = pci_config_readl(bdf, qemu_cap + RES_RESERVE_PREF_MEM_32); - tmp_size_64 = (pci_config_readl(bdf, qemu_cap + RES_RESERVE_PREF_MEM_64) | - (u64)pci_config_readl(bdf, qemu_cap + RES_RESERVE_PREF_MEM_64 + 4) << 32); - if (tmp_size != (u32)-1 && tmp_size_64 == (u64)-1) { - size = tmp_size; - } else if (tmp_size == (u32)-1 && tmp_size_64 != (u64)-1) { - size = tmp_size_64; - } else if (tmp_size != (u32)-1 && tmp_size_64 != (u64)-1) { - dprintf(1, "PCI: resource reserve cap PREF32 and PREF64" - " conflict\n"); - } - break; - default: - break; - } - } - if (pci_region_align(&s->r[type]) > align) - align = pci_region_align(&s->r[type]); - u64 sum = pci_region_sum(&s->r[type]); - int resource_optional = pcie_cap && (type == PCI_REGION_TYPE_IO); - if (!sum && hotplug_support && !resource_optional) - sum = align; /* reserve min size for hot-plug */ - if (size > sum) { - dprintf(1, "PCI: QEMU resource reserve cap: " - "size %08llx type %s\n", - size, region_type_name[type]); - if (type != PCI_REGION_TYPE_IO) { - size = ALIGN(size, align); - } - } else { - size = ALIGN(sum, align); - } - int is64 = pci_bios_bridge_region_is64(&s->r[type], - s->bus_dev, type); - // entry->bar is -1 if the entry represents a bridge region - struct pci_region_entry *entry = pci_region_create_entry( - parent, s->bus_dev, -1, size, align, type, is64); - if (!entry) - return -1; - dprintf(1, "PCI: secondary bus %d size %08llx type %s\n", - entry->dev->secondary_bus, size, - region_type_name[entry->type]); - } - } - return 0; -} - - -/**************************************************************** - * BAR assignment - ****************************************************************/ - -// Setup region bases (given the regions' size and alignment) -static int pci_bios_init_root_regions_io(struct pci_bus *bus) -{ - /* - * QEMU I/O address space usage: - * 0000 - 0fff legacy isa, pci config, pci root bus, ... - * 1000 - 9fff free - * a000 - afff hotplug (cpu, pci via acpi, i440fx/piix only) - * b000 - bfff power management (PORT_ACPI_PM_BASE) - * [ qemu 1.4+ implements pci config registers - * properly so guests can place the registers - * where they want, on older versions its fixed ] - * c000 - ffff free, traditionally used for pci io - */ - struct pci_region *r_io = &bus->r[PCI_REGION_TYPE_IO]; - u64 sum = pci_region_sum(r_io); - if (sum < 0x4000) { - /* traditional region is big enougth, use it */ - r_io->base = 0xc000; - } else if (sum < pci_io_low_end - 0x1000) { - /* use the larger region at 0x1000 */ - r_io->base = 0x1000; - } else { - /* not enouth io address space -> error out */ - return -1; - } - dprintf(1, "PCI: IO: %4llx - %4llx\n", r_io->base, r_io->base + sum - 1); - return 0; -} - -static int pci_bios_init_root_regions_mem(struct pci_bus *bus) -{ - struct pci_region *r_end = &bus->r[PCI_REGION_TYPE_PREFMEM]; - struct pci_region *r_start = &bus->r[PCI_REGION_TYPE_MEM]; - - if (pci_region_align(r_start) < pci_region_align(r_end)) { - // Swap regions to improve alignment. - r_end = r_start; - r_start = &bus->r[PCI_REGION_TYPE_PREFMEM]; - } - u64 sum = pci_region_sum(r_end); - u64 align = pci_region_align(r_end); - r_end->base = ALIGN_DOWN((pcimem_end - sum), align); - sum = pci_region_sum(r_start); - align = pci_region_align(r_start); - r_start->base = ALIGN_DOWN((r_end->base - sum), align); - - if ((r_start->base < pcimem_start) || - (r_start->base > pcimem_end)) - // Memory range requested is larger than available. - return -1; - return 0; -} - -#define PCI_IO_SHIFT 8 -#define PCI_MEMORY_SHIFT 16 -#define PCI_PREF_MEMORY_SHIFT 16 - -static void -pci_region_map_one_entry(struct pci_region_entry *entry, u64 addr) -{ - if (entry->bar >= 0) { - dprintf(1, "PCI: map device bdf=%pP" - " bar %d, addr %08llx, size %08llx [%s]\n", - entry->dev, - entry->bar, addr, entry->size, region_type_name[entry->type]); - - pci_set_io_region_addr(entry->dev, entry->bar, addr, entry->is64); - return; - } - - u16 bdf = entry->dev->bdf; - u64 limit = addr + entry->size - 1; - if (entry->type == PCI_REGION_TYPE_IO) { - pci_config_writeb(bdf, PCI_IO_BASE, addr >> PCI_IO_SHIFT); - pci_config_writew(bdf, PCI_IO_BASE_UPPER16, 0); - pci_config_writeb(bdf, PCI_IO_LIMIT, limit >> PCI_IO_SHIFT); - pci_config_writew(bdf, PCI_IO_LIMIT_UPPER16, 0); - } - if (entry->type == PCI_REGION_TYPE_MEM) { - pci_config_writew(bdf, PCI_MEMORY_BASE, addr >> PCI_MEMORY_SHIFT); - pci_config_writew(bdf, PCI_MEMORY_LIMIT, limit >> PCI_MEMORY_SHIFT); - } - if (entry->type == PCI_REGION_TYPE_PREFMEM) { - pci_config_writew(bdf, PCI_PREF_MEMORY_BASE, addr >> PCI_PREF_MEMORY_SHIFT); - pci_config_writew(bdf, PCI_PREF_MEMORY_LIMIT, limit >> PCI_PREF_MEMORY_SHIFT); - pci_config_writel(bdf, PCI_PREF_BASE_UPPER32, addr >> 32); - pci_config_writel(bdf, PCI_PREF_LIMIT_UPPER32, limit >> 32); - } -} - -static void pci_region_map_entries(struct pci_bus *busses, struct pci_region *r) -{ - struct hlist_node *n; - struct pci_region_entry *entry; - hlist_for_each_entry_safe(entry, n, &r->list, node) { - u64 addr = r->base; - r->base += entry->size; - if (entry->bar == -1) - // Update bus base address if entry is a bridge region - busses[entry->dev->secondary_bus].r[entry->type].base = addr; - pci_region_map_one_entry(entry, addr); - hlist_del(&entry->node); - free(entry); - } -} - -static void pci_bios_map_devices(struct pci_bus *busses) -{ - if (pci_bios_init_root_regions_io(busses)) - panic("PCI: out of I/O address space\n"); - - dprintf(1, "PCI: 32: %016llx - %016llx\n", pcimem_start, pcimem_end); - if (pci_bios_init_root_regions_mem(busses)) { - struct pci_region r64_mem, r64_pref; - r64_mem.list.first = NULL; - r64_pref.list.first = NULL; - pci_region_migrate_64bit_entries(&busses[0].r[PCI_REGION_TYPE_MEM], - &r64_mem); - pci_region_migrate_64bit_entries(&busses[0].r[PCI_REGION_TYPE_PREFMEM], - &r64_pref); - - if (pci_bios_init_root_regions_mem(busses)) - panic("PCI: out of 32bit address space\n"); - - u64 sum_mem = pci_region_sum(&r64_mem); - u64 sum_pref = pci_region_sum(&r64_pref); - u64 align_mem = pci_region_align(&r64_mem); - u64 align_pref = pci_region_align(&r64_pref); - - r64_mem.base = le64_to_cpu(romfile_loadint("etc/reserved-memory-end", 0)); - if (r64_mem.base < 0x100000000LL + RamSizeOver4G) - r64_mem.base = 0x100000000LL + RamSizeOver4G; - r64_mem.base = ALIGN(r64_mem.base, align_mem); - r64_mem.base = ALIGN(r64_mem.base, (1LL<<30)); // 1G hugepage - r64_pref.base = r64_mem.base + sum_mem; - r64_pref.base = ALIGN(r64_pref.base, align_pref); - r64_pref.base = ALIGN(r64_pref.base, (1LL<<30)); // 1G hugepage - pcimem64_start = r64_mem.base; - pcimem64_end = r64_pref.base + sum_pref; - pcimem64_end = ALIGN(pcimem64_end, (1LL<<30)); // 1G hugepage - dprintf(1, "PCI: 64: %016llx - %016llx\n", pcimem64_start, pcimem64_end); - - pci_region_map_entries(busses, &r64_mem); - pci_region_map_entries(busses, &r64_pref); - } else { - // no bars mapped high -> drop 64bit window (see dsdt) - pcimem64_start = 0; - } - // Map regions on each device. - int bus; - for (bus = 0; bus<=MaxPCIBus; bus++) { - int type; - for (type = 0; type < PCI_REGION_TYPE_COUNT; type++) - pci_region_map_entries(busses, &busses[bus].r[type]); - } -} - - -/**************************************************************** - * Main setup code - ****************************************************************/ - -void -pci_setup(void) -{ - if (!CONFIG_QEMU) - return; - - dprintf(3, "pci setup\n"); - - dprintf(1, "=== PCI bus & bridge init ===\n"); - if (pci_probe_host() != 0) { - return; - } - pci_bios_init_bus(); - - dprintf(1, "=== PCI device probing ===\n"); - pci_probe_devices(); - - pcimem_start = RamSize; - pci_bios_init_platform(); - - dprintf(1, "=== PCI new allocation pass #1 ===\n"); - struct pci_bus *busses = malloc_tmp(sizeof(*busses) * (MaxPCIBus + 1)); - if (!busses) { - warn_noalloc(); - return; - } - memset(busses, 0, sizeof(*busses) * (MaxPCIBus + 1)); - if (pci_bios_check_devices(busses)) - return; - - dprintf(1, "=== PCI new allocation pass #2 ===\n"); - pci_bios_map_devices(busses); - - pci_bios_init_devices(); - - free(busses); - - pci_enable_default_vga(); -} diff --git a/payloads/external/SeaBIOS/src/fw/pirtable.c b/payloads/external/SeaBIOS/src/fw/pirtable.c deleted file mode 100644 index bf8c0470..00000000 --- a/payloads/external/SeaBIOS/src/fw/pirtable.c +++ /dev/null @@ -1,103 +0,0 @@ -// PIR table generation (for emulators) -// DO NOT ADD NEW FEATURES HERE. (See paravirt.c / biostables.c instead.) -// -// Copyright (C) 2008 Kevin O'Connor <kevin@koconnor.net> -// Copyright (C) 2002 MandrakeSoft S.A. -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "config.h" // CONFIG_* -#include "output.h" // dprintf -#include "std/pirtable.h" // struct pir_header -#include "string.h" // checksum -#include "util.h" // PirAddr - -struct pir_table { - struct pir_header pir; - struct pir_slot slots[6]; -} PACKED; - -static struct pir_table PIR_TABLE = { - .pir = { - .version = 0x0100, - .size = sizeof(struct pir_table), - .router_devfunc = 0x08, - .compatible_devid = 0x122e8086, - }, - .slots = { - { - // first slot entry PCI-to-ISA (embedded) - .dev = 1<<3, - .links = { - {.link = 0x60, .bitmap = 0xdef8}, // INTA# - {.link = 0x61, .bitmap = 0xdef8}, // INTB# - {.link = 0x62, .bitmap = 0xdef8}, // INTC# - {.link = 0x63, .bitmap = 0xdef8}, // INTD# - }, - .slot_nr = 0, // embedded - }, { - // second slot entry: 1st PCI slot - .dev = 2<<3, - .links = { - {.link = 0x61, .bitmap = 0xdef8}, // INTA# - {.link = 0x62, .bitmap = 0xdef8}, // INTB# - {.link = 0x63, .bitmap = 0xdef8}, // INTC# - {.link = 0x60, .bitmap = 0xdef8}, // INTD# - }, - .slot_nr = 1, - }, { - // third slot entry: 2nd PCI slot - .dev = 3<<3, - .links = { - {.link = 0x62, .bitmap = 0xdef8}, // INTA# - {.link = 0x63, .bitmap = 0xdef8}, // INTB# - {.link = 0x60, .bitmap = 0xdef8}, // INTC# - {.link = 0x61, .bitmap = 0xdef8}, // INTD# - }, - .slot_nr = 2, - }, { - // 4th slot entry: 3rd PCI slot - .dev = 4<<3, - .links = { - {.link = 0x63, .bitmap = 0xdef8}, // INTA# - {.link = 0x60, .bitmap = 0xdef8}, // INTB# - {.link = 0x61, .bitmap = 0xdef8}, // INTC# - {.link = 0x62, .bitmap = 0xdef8}, // INTD# - }, - .slot_nr = 3, - }, { - // 5th slot entry: 4th PCI slot - .dev = 5<<3, - .links = { - {.link = 0x60, .bitmap = 0xdef8}, // INTA# - {.link = 0x61, .bitmap = 0xdef8}, // INTB# - {.link = 0x62, .bitmap = 0xdef8}, // INTC# - {.link = 0x63, .bitmap = 0xdef8}, // INTD# - }, - .slot_nr = 4, - }, { - // 6th slot entry: 5th PCI slot - .dev = 6<<3, - .links = { - {.link = 0x61, .bitmap = 0xdef8}, // INTA# - {.link = 0x62, .bitmap = 0xdef8}, // INTB# - {.link = 0x63, .bitmap = 0xdef8}, // INTC# - {.link = 0x60, .bitmap = 0xdef8}, // INTD# - }, - .slot_nr = 5, - }, - } -}; - -void -pirtable_setup(void) -{ - if (! CONFIG_PIRTABLE) - return; - - dprintf(3, "init PIR table\n"); - - PIR_TABLE.pir.signature = PIR_SIGNATURE; - PIR_TABLE.pir.checksum -= checksum(&PIR_TABLE, sizeof(PIR_TABLE)); - copy_pir(&PIR_TABLE); -} diff --git a/payloads/external/SeaBIOS/src/fw/q35-acpi-dsdt.dsl b/payloads/external/SeaBIOS/src/fw/q35-acpi-dsdt.dsl deleted file mode 100644 index 5dec5414..00000000 --- a/payloads/external/SeaBIOS/src/fw/q35-acpi-dsdt.dsl +++ /dev/null @@ -1,450 +0,0 @@ -/* - * Bochs/QEMU ACPI DSDT ASL definition - * - * Copyright (c) 2006 Fabrice Bellard - * - * This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU Lesser General Public - * License version 2 as published by the Free Software Foundation. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * Lesser General Public License for more details. - * - * You should have received a copy of the GNU Lesser General Public - * License along with this library; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ -/* - * Copyright (c) 2010 Isaku Yamahata - * yamahata at valinux co jp - * Based on acpi-dsdt.dsl, but heavily modified for q35 chipset. - */ - -DefinitionBlock ( - "q35-acpi-dsdt.aml",// Output Filename - "DSDT", // Signature - 0x01, // DSDT Compliance Revision - "BXPC", // OEMID - "BXDSDT", // TABLE ID - 0x2 // OEM Revision - ) -{ - -#include "acpi-dsdt-dbug.dsl" - - Scope(\_SB) { - OperationRegion(PCST, SystemIO, 0xae00, 0x0c) - OperationRegion(PCSB, SystemIO, 0xae0c, 0x01) - Field(PCSB, AnyAcc, NoLock, WriteAsZeros) { - PCIB, 8, - } - } - - -/**************************************************************** - * PCI Bus definition - ****************************************************************/ - - Scope(\_SB) { - Device(PCI0) { - Name(_HID, EisaId("PNP0A08")) - Name(_CID, EisaId("PNP0A03")) - Name(_ADR, 0x00) - Name(_UID, 1) - - // _OSC: based on sample of ACPI3.0b spec - Name(SUPP, 0) // PCI _OSC Support Field value - Name(CTRL, 0) // PCI _OSC Control Field value - Method(_OSC, 4) { - // Create DWORD-addressable fields from the Capabilities Buffer - CreateDWordField(Arg3, 0, CDW1) - - // Check for proper UUID - If (LEqual(Arg0, ToUUID("33DB4D5B-1FF7-401C-9657-7441C03DD766"))) { - // Create DWORD-addressable fields from the Capabilities Buffer - CreateDWordField(Arg3, 4, CDW2) - CreateDWordField(Arg3, 8, CDW3) - - // Save Capabilities DWORD2 & 3 - Store(CDW2, SUPP) - Store(CDW3, CTRL) - - // Always allow native PME, AER (no dependencies) - // Never allow SHPC (no SHPC controller in this system) - And(CTRL, 0x1D, CTRL) - -#if 0 // For now, nothing to do - If (Not(And(CDW1, 1))) { // Query flag clear? - // Disable GPEs for features granted native control. - If (And(CTRL, 0x01)) { // Hot plug control granted? - Store(0, HPCE) // clear the hot plug SCI enable bit - Store(1, HPCS) // clear the hot plug SCI status bit - } - If (And(CTRL, 0x04)) { // PME control granted? - Store(0, PMCE) // clear the PME SCI enable bit - Store(1, PMCS) // clear the PME SCI status bit - } - If (And(CTRL, 0x10)) { // OS restoring PCI Express cap structure? - // Set status to not restore PCI Express cap structure - // upon resume from S3 - Store(1, S3CR) - } - } -#endif - If (LNotEqual(Arg1, One)) { - // Unknown revision - Or(CDW1, 0x08, CDW1) - } - If (LNotEqual(CDW3, CTRL)) { - // Capabilities bits were masked - Or(CDW1, 0x10, CDW1) - } - // Update DWORD3 in the buffer - Store(CTRL, CDW3) - } Else { - Or(CDW1, 4, CDW1) // Unrecognized UUID - } - Return (Arg3) - } - } - } - -#include "acpi-dsdt-pci-crs.dsl" -#include "acpi-dsdt-hpet.dsl" - - -/**************************************************************** - * VGA - ****************************************************************/ - - Scope(\_SB.PCI0) { - Device(VGA) { - Name(_ADR, 0x00010000) - Method(_S1D, 0, NotSerialized) { - Return (0x00) - } - Method(_S2D, 0, NotSerialized) { - Return (0x00) - } - Method(_S3D, 0, NotSerialized) { - Return (0x00) - } - } - } - - -/**************************************************************** - * LPC ISA bridge - ****************************************************************/ - - Scope(\_SB.PCI0) { - /* PCI D31:f0 LPC ISA bridge */ - Device(ISA) { - /* PCI D31:f0 */ - Name(_ADR, 0x001f0000) - - /* ICH9 PCI to ISA irq remapping */ - OperationRegion(PIRQ, PCI_Config, 0x60, 0x0C) - - OperationRegion(LPCD, PCI_Config, 0x80, 0x2) - Field(LPCD, AnyAcc, NoLock, Preserve) { - COMA, 3, - , 1, - COMB, 3, - - Offset(0x01), - LPTD, 2, - , 2, - FDCD, 2 - } - OperationRegion(LPCE, PCI_Config, 0x82, 0x2) - Field(LPCE, AnyAcc, NoLock, Preserve) { - CAEN, 1, - CBEN, 1, - LPEN, 1, - FDEN, 1 - } - } - } - -#include "acpi-dsdt-isa.dsl" - - -/**************************************************************** - * PCI IRQs - ****************************************************************/ - - /* Zero => PIC mode, One => APIC Mode */ - Name(\PICF, Zero) - Method(\_PIC, 1, NotSerialized) { - Store(Arg0, \PICF) - } - - Scope(\_SB) { - Scope(PCI0) { -#define prt_slot_lnk(nr, lnk0, lnk1, lnk2, lnk3) \ - Package() { nr##ffff, 0, lnk0, 0 }, \ - Package() { nr##ffff, 1, lnk1, 0 }, \ - Package() { nr##ffff, 2, lnk2, 0 }, \ - Package() { nr##ffff, 3, lnk3, 0 } - -#define prt_slot_lnkA(nr) prt_slot_lnk(nr, LNKA, LNKB, LNKC, LNKD) -#define prt_slot_lnkB(nr) prt_slot_lnk(nr, LNKB, LNKC, LNKD, LNKA) -#define prt_slot_lnkC(nr) prt_slot_lnk(nr, LNKC, LNKD, LNKA, LNKB) -#define prt_slot_lnkD(nr) prt_slot_lnk(nr, LNKD, LNKA, LNKB, LNKC) - -#define prt_slot_lnkE(nr) prt_slot_lnk(nr, LNKE, LNKF, LNKG, LNKH) -#define prt_slot_lnkF(nr) prt_slot_lnk(nr, LNKF, LNKG, LNKH, LNKE) -#define prt_slot_lnkG(nr) prt_slot_lnk(nr, LNKG, LNKH, LNKE, LNKF) -#define prt_slot_lnkH(nr) prt_slot_lnk(nr, LNKH, LNKE, LNKF, LNKG) - - Name(PRTP, package() { - prt_slot_lnkE(0x0000), - prt_slot_lnkF(0x0001), - prt_slot_lnkG(0x0002), - prt_slot_lnkH(0x0003), - prt_slot_lnkE(0x0004), - prt_slot_lnkF(0x0005), - prt_slot_lnkG(0x0006), - prt_slot_lnkH(0x0007), - prt_slot_lnkE(0x0008), - prt_slot_lnkF(0x0009), - prt_slot_lnkG(0x000a), - prt_slot_lnkH(0x000b), - prt_slot_lnkE(0x000c), - prt_slot_lnkF(0x000d), - prt_slot_lnkG(0x000e), - prt_slot_lnkH(0x000f), - prt_slot_lnkE(0x0010), - prt_slot_lnkF(0x0011), - prt_slot_lnkG(0x0012), - prt_slot_lnkH(0x0013), - prt_slot_lnkE(0x0014), - prt_slot_lnkF(0x0015), - prt_slot_lnkG(0x0016), - prt_slot_lnkH(0x0017), - prt_slot_lnkE(0x0018), - - /* INTA -> PIRQA for slot 25 - 31 - see the default value of D<N>IR */ - prt_slot_lnkA(0x0019), - prt_slot_lnkA(0x001a), - prt_slot_lnkA(0x001b), - prt_slot_lnkA(0x001c), - prt_slot_lnkA(0x001d), - - /* PCIe->PCI bridge. use PIRQ[E-H] */ - prt_slot_lnkE(0x001e), - - prt_slot_lnkA(0x001f) - }) - -#define prt_slot_gsi(nr, gsi0, gsi1, gsi2, gsi3) \ - Package() { nr##ffff, 0, gsi0, 0 }, \ - Package() { nr##ffff, 1, gsi1, 0 }, \ - Package() { nr##ffff, 2, gsi2, 0 }, \ - Package() { nr##ffff, 3, gsi3, 0 } - -#define prt_slot_gsiA(nr) prt_slot_gsi(nr, GSIA, GSIB, GSIC, GSID) -#define prt_slot_gsiB(nr) prt_slot_gsi(nr, GSIB, GSIC, GSID, GSIA) -#define prt_slot_gsiC(nr) prt_slot_gsi(nr, GSIC, GSID, GSIA, GSIB) -#define prt_slot_gsiD(nr) prt_slot_gsi(nr, GSID, GSIA, GSIB, GSIC) - -#define prt_slot_gsiE(nr) prt_slot_gsi(nr, GSIE, GSIF, GSIG, GSIH) -#define prt_slot_gsiF(nr) prt_slot_gsi(nr, GSIF, GSIG, GSIH, GSIE) -#define prt_slot_gsiG(nr) prt_slot_gsi(nr, GSIG, GSIH, GSIE, GSIF) -#define prt_slot_gsiH(nr) prt_slot_gsi(nr, GSIH, GSIE, GSIF, GSIG) - - Name(PRTA, package() { - prt_slot_gsiE(0x0000), - prt_slot_gsiF(0x0001), - prt_slot_gsiG(0x0002), - prt_slot_gsiH(0x0003), - prt_slot_gsiE(0x0004), - prt_slot_gsiF(0x0005), - prt_slot_gsiG(0x0006), - prt_slot_gsiH(0x0007), - prt_slot_gsiE(0x0008), - prt_slot_gsiF(0x0009), - prt_slot_gsiG(0x000a), - prt_slot_gsiH(0x000b), - prt_slot_gsiE(0x000c), - prt_slot_gsiF(0x000d), - prt_slot_gsiG(0x000e), - prt_slot_gsiH(0x000f), - prt_slot_gsiE(0x0010), - prt_slot_gsiF(0x0011), - prt_slot_gsiG(0x0012), - prt_slot_gsiH(0x0013), - prt_slot_gsiE(0x0014), - prt_slot_gsiF(0x0015), - prt_slot_gsiG(0x0016), - prt_slot_gsiH(0x0017), - prt_slot_gsiE(0x0018), - - /* INTA -> PIRQA for slot 25 - 31, but 30 - see the default value of D<N>IR */ - prt_slot_gsiA(0x0019), - prt_slot_gsiA(0x001a), - prt_slot_gsiA(0x001b), - prt_slot_gsiA(0x001c), - prt_slot_gsiA(0x001d), - - /* PCIe->PCI bridge. use PIRQ[E-H] */ - prt_slot_gsiE(0x001e), - - prt_slot_gsiA(0x001f) - }) - - Method(_PRT, 0, NotSerialized) { - /* PCI IRQ routing table, example from ACPI 2.0a specification, - section 6.2.8.1 */ - /* Note: we provide the same info as the PCI routing - table of the Bochs BIOS */ - If (LEqual(\PICF, Zero)) { - Return (PRTP) - } Else { - Return (PRTA) - } - } - } - - Field(PCI0.ISA.PIRQ, ByteAcc, NoLock, Preserve) { - PRQA, 8, - PRQB, 8, - PRQC, 8, - PRQD, 8, - - Offset(0x08), - PRQE, 8, - PRQF, 8, - PRQG, 8, - PRQH, 8 - } - - Method(IQST, 1, NotSerialized) { - // _STA method - get status - If (And(0x80, Arg0)) { - Return (0x09) - } - Return (0x0B) - } - Method(IQCR, 1, Serialized) { - // _CRS method - get current settings - Name(PRR0, ResourceTemplate() { - Interrupt(, Level, ActiveHigh, Shared) { 0 } - }) - CreateDWordField(PRR0, 0x05, PRRI) - Store(And(Arg0, 0x0F), PRRI) - Return (PRR0) - } - -#define define_link(link, uid, reg) \ - Device(link) { \ - Name(_HID, EISAID("PNP0C0F")) \ - Name(_UID, uid) \ - Name(_PRS, ResourceTemplate() { \ - Interrupt(, Level, ActiveHigh, Shared) { \ - 5, 10, 11 \ - } \ - }) \ - Method(_STA, 0, NotSerialized) { \ - Return (IQST(reg)) \ - } \ - Method(_DIS, 0, NotSerialized) { \ - Or(reg, 0x80, reg) \ - } \ - Method(_CRS, 0, NotSerialized) { \ - Return (IQCR(reg)) \ - } \ - Method(_SRS, 1, NotSerialized) { \ - CreateDWordField(Arg0, 0x05, PRRI) \ - Store(PRRI, reg) \ - } \ - } - - define_link(LNKA, 0, PRQA) - define_link(LNKB, 1, PRQB) - define_link(LNKC, 2, PRQC) - define_link(LNKD, 3, PRQD) - define_link(LNKE, 4, PRQE) - define_link(LNKF, 5, PRQF) - define_link(LNKG, 6, PRQG) - define_link(LNKH, 7, PRQH) - -#define define_gsi_link(link, uid, gsi) \ - Device(link) { \ - Name(_HID, EISAID("PNP0C0F")) \ - Name(_UID, uid) \ - Name(_PRS, ResourceTemplate() { \ - Interrupt(, Level, ActiveHigh, Shared) { \ - gsi \ - } \ - }) \ - Name(_CRS, ResourceTemplate() { \ - Interrupt(, Level, ActiveHigh, Shared) { \ - gsi \ - } \ - }) \ - Method(_SRS, 1, NotSerialized) { \ - } \ - } - - define_gsi_link(GSIA, 0, 0x10) - define_gsi_link(GSIB, 0, 0x11) - define_gsi_link(GSIC, 0, 0x12) - define_gsi_link(GSID, 0, 0x13) - define_gsi_link(GSIE, 0, 0x14) - define_gsi_link(GSIF, 0, 0x15) - define_gsi_link(GSIG, 0, 0x16) - define_gsi_link(GSIH, 0, 0x17) - } - -#include "acpi-dsdt-cpu-hotplug.dsl" - - -/**************************************************************** - * General purpose events - ****************************************************************/ - - Scope(\_GPE) { - Name(_HID, "ACPI0006") - - Method(_L00) { - } - Method(_L01) { - // CPU hotplug event - \_SB.PRSC() - } - Method(_L02) { - } - Method(_L03) { - } - Method(_L04) { - } - Method(_L05) { - } - Method(_L06) { - } - Method(_L07) { - } - Method(_L08) { - } - Method(_L09) { - } - Method(_L0A) { - } - Method(_L0B) { - } - Method(_L0C) { - } - Method(_L0D) { - } - Method(_L0E) { - } - Method(_L0F) { - } - } -} diff --git a/payloads/external/SeaBIOS/src/fw/romfile_loader.c b/payloads/external/SeaBIOS/src/fw/romfile_loader.c deleted file mode 100644 index 18476e20..00000000 --- a/payloads/external/SeaBIOS/src/fw/romfile_loader.c +++ /dev/null @@ -1,259 +0,0 @@ -#include "romfile_loader.h" -#include "byteorder.h" // leXX_to_cpu/cpu_to_leXX -#include "util.h" // checksum -#include "string.h" // strcmp -#include "romfile.h" // struct romfile_s -#include "malloc.h" // Zone*, _malloc -#include "list.h" // struct hlist_node -#include "output.h" // warn_* -#include "paravirt.h" // qemu_cfg_write_file - -struct romfile_loader_file { - struct romfile_s *file; - void *data; -}; -struct romfile_loader_files { - int nfiles; - struct romfile_loader_file files[]; -}; - -// Data structures for storing "write pointer" entries for possible replay -struct romfile_wr_pointer_entry { - u64 pointer; - u32 offset; - u16 key; - u8 ptr_size; - struct hlist_node node; -}; -static struct hlist_head romfile_pointer_list; - -static struct romfile_loader_file * -romfile_loader_find(const char *name, - struct romfile_loader_files *files) -{ - int i; - if (name[ROMFILE_LOADER_FILESZ - 1]) - return NULL; - for (i = 0; i < files->nfiles; ++i) - if (!strcmp(files->files[i].file->name, name)) - return &files->files[i]; - return NULL; -} - -// Replay "write pointer" entries back to QEMU -void romfile_fw_cfg_resume(void) -{ - if (!CONFIG_QEMU) - return; - - struct romfile_wr_pointer_entry *entry; - hlist_for_each_entry(entry, &romfile_pointer_list, node) { - qemu_cfg_write_file_simple(&entry->pointer, entry->key, - entry->offset, entry->ptr_size); - } -} - -static void romfile_loader_allocate(struct romfile_loader_entry_s *entry, - struct romfile_loader_files *files) -{ - struct zone_s *zone; - struct romfile_loader_file *file = &files->files[files->nfiles]; - void *data; - int ret; - unsigned alloc_align = le32_to_cpu(entry->alloc.align); - - if (alloc_align & (alloc_align - 1)) - goto err; - - switch (entry->alloc.zone) { - case ROMFILE_LOADER_ALLOC_ZONE_HIGH: - zone = &ZoneHigh; - break; - case ROMFILE_LOADER_ALLOC_ZONE_FSEG: - zone = &ZoneFSeg; - break; - default: - goto err; - } - if (alloc_align < MALLOC_MIN_ALIGN) - alloc_align = MALLOC_MIN_ALIGN; - if (entry->alloc.file[ROMFILE_LOADER_FILESZ - 1]) - goto err; - file->file = romfile_find(entry->alloc.file); - if (!file->file || !file->file->size) - return; - data = _malloc(zone, file->file->size, alloc_align); - if (!data) { - warn_noalloc(); - return; - } - ret = file->file->copy(file->file, data, file->file->size); - if (ret != file->file->size) - goto file_err; - file->data = data; - files->nfiles++; - return; - -file_err: - free(data); -err: - warn_internalerror(); -} - -static void romfile_loader_add_pointer(struct romfile_loader_entry_s *entry, - struct romfile_loader_files *files) -{ - struct romfile_loader_file *dest_file; - struct romfile_loader_file *src_file; - unsigned offset = le32_to_cpu(entry->pointer.offset); - u64 pointer = 0; - - dest_file = romfile_loader_find(entry->pointer.dest_file, files); - src_file = romfile_loader_find(entry->pointer.src_file, files); - - if (!dest_file || !src_file || !dest_file->data || !src_file->data || - offset + entry->pointer.size < offset || - offset + entry->pointer.size > dest_file->file->size || - entry->pointer.size < 1 || entry->pointer.size > 8 || - entry->pointer.size & (entry->pointer.size - 1)) - goto err; - - memcpy(&pointer, dest_file->data + offset, entry->pointer.size); - pointer = le64_to_cpu(pointer); - pointer += (unsigned long)src_file->data; - pointer = cpu_to_le64(pointer); - memcpy(dest_file->data + offset, &pointer, entry->pointer.size); - - return; -err: - warn_internalerror(); -} - -static void romfile_loader_add_checksum(struct romfile_loader_entry_s *entry, - struct romfile_loader_files *files) -{ - struct romfile_loader_file *file; - unsigned offset = le32_to_cpu(entry->cksum.offset); - unsigned start = le32_to_cpu(entry->cksum.start); - unsigned len = le32_to_cpu(entry->cksum.length); - u8 *data; - - file = romfile_loader_find(entry->cksum.file, files); - - if (!file || !file->data || offset >= file->file->size || - start + len < start || start + len > file->file->size) - goto err; - - data = file->data + offset; - *data -= checksum(file->data + start, len); - - return; -err: - warn_internalerror(); -} - -static void romfile_loader_write_pointer(struct romfile_loader_entry_s *entry, - struct romfile_loader_files *files) -{ - struct romfile_s *dest_file; - struct romfile_loader_file *src_file; - unsigned dst_offset = le32_to_cpu(entry->wr_pointer.dst_offset); - unsigned src_offset = le32_to_cpu(entry->wr_pointer.src_offset); - u64 pointer = 0; - - /* Writing back to a file that may not be loaded in RAM */ - dest_file = romfile_find(entry->wr_pointer.dest_file); - src_file = romfile_loader_find(entry->wr_pointer.src_file, files); - - if (!dest_file || !src_file || !src_file->data || - dst_offset + entry->wr_pointer.size < dst_offset || - dst_offset + entry->wr_pointer.size > dest_file->size || - src_offset >= src_file->file->size || - entry->wr_pointer.size < 1 || entry->wr_pointer.size > 8 || - entry->wr_pointer.size & (entry->wr_pointer.size - 1)) { - goto err; - } - - pointer = (unsigned long)src_file->data + src_offset; - /* Make sure the pointer fits within wr_pointer.size */ - if ((entry->wr_pointer.size != sizeof(u64)) && - ((pointer >> (entry->wr_pointer.size * 8)) > 0)) { - goto err; - } - pointer = cpu_to_le64(pointer); - - /* Only supported on QEMU */ - if (qemu_cfg_write_file(&pointer, dest_file, dst_offset, - entry->wr_pointer.size) != entry->wr_pointer.size) { - goto err; - } - - /* Store the info so it can replayed later if necessary */ - struct romfile_wr_pointer_entry *store = malloc_high(sizeof(*store)); - if (!store) { - warn_noalloc(); - return; - } - store->pointer = pointer; - store->key = qemu_get_romfile_key(dest_file); - store->offset = dst_offset; - store->ptr_size = entry->wr_pointer.size; - hlist_add_head(&store->node, &romfile_pointer_list); - - return; - err: - warn_internalerror(); -} - -int romfile_loader_execute(const char *name) -{ - struct romfile_loader_entry_s *entry; - int size, offset = 0, nfiles; - struct romfile_loader_files *files; - void *data = romfile_loadfile(name, &size); - if (!data) - return -1; - - if (size % sizeof(*entry)) { - warn_internalerror(); - goto err; - } - - /* (over)estimate the number of files to load. */ - nfiles = size / sizeof(*entry); - files = malloc_tmp(sizeof(*files) + nfiles * sizeof(files->files[0])); - if (!files) { - warn_noalloc(); - goto err; - } - files->nfiles = 0; - - for (offset = 0; offset < size; offset += sizeof(*entry)) { - entry = data + offset; - switch (le32_to_cpu(entry->command)) { - case ROMFILE_LOADER_COMMAND_ALLOCATE: - romfile_loader_allocate(entry, files); - break; - case ROMFILE_LOADER_COMMAND_ADD_POINTER: - romfile_loader_add_pointer(entry, files); - break; - case ROMFILE_LOADER_COMMAND_ADD_CHECKSUM: - romfile_loader_add_checksum(entry, files); - break; - case ROMFILE_LOADER_COMMAND_WRITE_POINTER: - romfile_loader_write_pointer(entry, files); - break; - default: - /* Skip commands that we don't recognize. */ - break; - } - } - - free(files); - free(data); - return 0; - -err: - free(data); - return -1; -} diff --git a/payloads/external/SeaBIOS/src/fw/romfile_loader.h b/payloads/external/SeaBIOS/src/fw/romfile_loader.h deleted file mode 100644 index fcd4ab23..00000000 --- a/payloads/external/SeaBIOS/src/fw/romfile_loader.h +++ /dev/null @@ -1,91 +0,0 @@ -#ifndef __ROMFILE_LOADER_H -#define __ROMFILE_LOADER_H - -#include "types.h" // u8 -#include "util.h" // romfile_s - -#define ROMFILE_LOADER_FILESZ 56 - -/* ROM file linker/loader interface. Linker uses little endian format */ -struct romfile_loader_entry_s { - u32 command; - union { - /* - * COMMAND_ALLOCATE - allocate a table from @alloc.file - * subject to @alloc.align alignment (must be power of 2) - * and @alloc.zone (can be HIGH or FSEG) requirements. - * - * Must appear exactly once for each file, and before - * this file is referenced by any other command. - */ - struct { - char file[ROMFILE_LOADER_FILESZ]; - u32 align; - u8 zone; - } alloc; - - /* - * COMMAND_ADD_POINTER - patch the table (originating from - * @dest_file) at @pointer.offset, by adding a pointer to the table - * originating from @src_file. 1,2,4 or 8 byte unsigned - * addition is used depending on @pointer.size. - */ - struct { - char dest_file[ROMFILE_LOADER_FILESZ]; - char src_file[ROMFILE_LOADER_FILESZ]; - u32 offset; - u8 size; - } pointer; - - /* - * COMMAND_ADD_CHECKSUM - calculate checksum of the range specified by - * @cksum.start and @cksum.length fields, - * and then add the value at @cksum_offset. - * Checksum simply sums -X for each byte X in the range - * using 8-bit math. - */ - struct { - char file[ROMFILE_LOADER_FILESZ]; - u32 offset; - u32 start; - u32 length; - } cksum; - - /* - * COMMAND_WRITE_POINTER - Write back to a host file via DMA, - * @wr_pointer.dest_file at offset @wr_pointer.dst_offset, a pointer - * to the table originating from @wr_pointer.src_file at offset - * @wr_pointer.src_offset. - * 1,2,4 or 8 byte unsigned addition is used depending on - * @wr_pointer.size. - */ - struct { - char dest_file[ROMFILE_LOADER_FILESZ]; - char src_file[ROMFILE_LOADER_FILESZ]; - u32 dst_offset; - u32 src_offset; - u8 size; - } wr_pointer; - - /* padding */ - char pad[124]; - }; -}; - -enum { - ROMFILE_LOADER_COMMAND_ALLOCATE = 0x1, - ROMFILE_LOADER_COMMAND_ADD_POINTER = 0x2, - ROMFILE_LOADER_COMMAND_ADD_CHECKSUM = 0x3, - ROMFILE_LOADER_COMMAND_WRITE_POINTER = 0x4, -}; - -enum { - ROMFILE_LOADER_ALLOC_ZONE_HIGH = 0x1, - ROMFILE_LOADER_ALLOC_ZONE_FSEG = 0x2, -}; - -int romfile_loader_execute(const char *name); - -void romfile_fw_cfg_resume(void); - -#endif diff --git a/payloads/external/SeaBIOS/src/fw/shadow.c b/payloads/external/SeaBIOS/src/fw/shadow.c deleted file mode 100644 index 4c627a8f..00000000 --- a/payloads/external/SeaBIOS/src/fw/shadow.c +++ /dev/null @@ -1,208 +0,0 @@ -// Support for enabling/disabling BIOS ram shadowing. -// -// Copyright (C) 2008-2010 Kevin O'Connor <kevin@koconnor.net> -// Copyright (C) 2006 Fabrice Bellard -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "config.h" // CONFIG_* -#include "dev-q35.h" // PCI_VENDOR_ID_INTEL -#include "dev-piix.h" // I440FX_PAM0 -#include "hw/pci.h" // pci_config_writeb -#include "hw/pci_ids.h" // PCI_VENDOR_ID_INTEL -#include "hw/pci_regs.h" // PCI_VENDOR_ID -#include "malloc.h" // rom_get_last -#include "output.h" // dprintf -#include "paravirt.h" // runningOnXen -#include "string.h" // memset -#include "util.h" // make_bios_writable -#include "x86.h" // wbinvd - -// On the emulators, the bios at 0xf0000 is also at 0xffff0000 -#define BIOS_SRC_OFFSET 0xfff00000 - -union pamdata_u { - u8 data8[8]; - u32 data32[2]; -}; - -// Enable shadowing and copy bios. -static void -__make_bios_writable_intel(u16 bdf, u32 pam0) -{ - // Read in current PAM settings from pci config space - union pamdata_u pamdata; - pamdata.data32[0] = pci_config_readl(bdf, ALIGN_DOWN(pam0, 4)); - pamdata.data32[1] = pci_config_readl(bdf, ALIGN_DOWN(pam0, 4) + 4); - u8 *pam = &pamdata.data8[pam0 & 0x03]; - - // Make ram from 0xc0000-0xf0000 writable - int i; - for (i=0; i<6; i++) - pam[i + 1] = 0x33; - - // Make ram from 0xf0000-0x100000 writable - int ram_present = pam[0] & 0x10; - pam[0] = 0x30; - - // Write PAM settings back to pci config space - pci_config_writel(bdf, ALIGN_DOWN(pam0, 4), pamdata.data32[0]); - pci_config_writel(bdf, ALIGN_DOWN(pam0, 4) + 4, pamdata.data32[1]); - - if (!ram_present) - // Copy bios. - memcpy(VSYMBOL(code32flat_start) - , VSYMBOL(code32flat_start) + BIOS_SRC_OFFSET - , SYMBOL(code32flat_end) - SYMBOL(code32flat_start)); -} - -static void -make_bios_writable_intel(u16 bdf, u32 pam0) -{ - int reg = pci_config_readb(bdf, pam0); - if (!(reg & 0x10)) { - // QEMU doesn't fully implement the piix shadow capabilities - - // if ram isn't backing the bios segment when shadowing is - // disabled, the code itself won't be in memory. So, run the - // code from the high-memory flash location. - u32 pos = (u32)__make_bios_writable_intel + BIOS_SRC_OFFSET; - void (*func)(u16 bdf, u32 pam0) = (void*)pos; - func(bdf, pam0); - return; - } - // Ram already present - just enable writes - __make_bios_writable_intel(bdf, pam0); -} - -static void -make_bios_readonly_intel(u16 bdf, u32 pam0) -{ - // Flush any pending writes before locking memory. - wbinvd(); - - // Read in current PAM settings from pci config space - union pamdata_u pamdata; - pamdata.data32[0] = pci_config_readl(bdf, ALIGN_DOWN(pam0, 4)); - pamdata.data32[1] = pci_config_readl(bdf, ALIGN_DOWN(pam0, 4) + 4); - u8 *pam = &pamdata.data8[pam0 & 0x03]; - - // Write protect roms from 0xc0000-0xf0000 - u32 romlast = BUILD_BIOS_ADDR, rommax = BUILD_BIOS_ADDR; - if (CONFIG_WRITABLE_UPPERMEMORY) - romlast = rom_get_last(); - if (CONFIG_MALLOC_UPPERMEMORY) - rommax = rom_get_max(); - int i; - for (i=0; i<6; i++) { - u32 mem = BUILD_ROM_START + i * 32*1024; - if (romlast < mem + 16*1024 || rommax < mem + 32*1024) { - if (romlast >= mem && rommax >= mem + 16*1024) - pam[i + 1] = 0x31; - break; - } - pam[i + 1] = 0x11; - } - - // Write protect 0xf0000-0x100000 - pam[0] = 0x10; - - // Write PAM settings back to pci config space - pci_config_writel(bdf, ALIGN_DOWN(pam0, 4), pamdata.data32[0]); - pci_config_writel(bdf, ALIGN_DOWN(pam0, 4) + 4, pamdata.data32[1]); -} - -static int ShadowBDF = -1; - -// Make the 0xc0000-0x100000 area read/writable. -void -make_bios_writable(void) -{ - if (!CONFIG_QEMU || runningOnXen()) - return; - - dprintf(3, "enabling shadow ram\n"); - - // At this point, statically allocated variables can't be written, - // so do this search manually. - int bdf; - foreachbdf(bdf, 0) { - u32 vendev = pci_config_readl(bdf, PCI_VENDOR_ID); - u16 vendor = vendev & 0xffff, device = vendev >> 16; - if (vendor == PCI_VENDOR_ID_INTEL - && device == PCI_DEVICE_ID_INTEL_82441) { - make_bios_writable_intel(bdf, I440FX_PAM0); - code_mutable_preinit(); - ShadowBDF = bdf; - return; - } - if (vendor == PCI_VENDOR_ID_INTEL - && device == PCI_DEVICE_ID_INTEL_Q35_MCH) { - make_bios_writable_intel(bdf, Q35_HOST_BRIDGE_PAM0); - code_mutable_preinit(); - ShadowBDF = bdf; - return; - } - } - dprintf(1, "Unable to unlock ram - bridge not found\n"); -} - -// Make the BIOS code segment area (0xf0000) read-only. -void -make_bios_readonly(void) -{ - if (!CONFIG_QEMU || runningOnXen()) - return; - dprintf(3, "locking shadow ram\n"); - - if (ShadowBDF < 0) { - dprintf(1, "Unable to lock ram - bridge not found\n"); - return; - } - - u16 device = pci_config_readw(ShadowBDF, PCI_DEVICE_ID); - if (device == PCI_DEVICE_ID_INTEL_82441) - make_bios_readonly_intel(ShadowBDF, I440FX_PAM0); - else - make_bios_readonly_intel(ShadowBDF, Q35_HOST_BRIDGE_PAM0); -} - -void -qemu_reboot(void) -{ - if (!CONFIG_QEMU || runningOnXen()) - return; - // QEMU doesn't map 0xc0000-0xfffff back to the original rom on a - // reset, so do that manually before invoking a hard reset. - void *flash = (void*)BIOS_SRC_OFFSET; - u32 hrp = (u32)&HaveRunPost; - if (readl(flash + hrp)) { - // There isn't a pristine copy of the BIOS at 0xffff0000 to copy - if (HaveRunPost == 3) { - // In a reboot loop. Try to shutdown the machine instead. - dprintf(1, "Unable to hard-reboot machine - attempting shutdown.\n"); - apm_shutdown(); - } - make_bios_writable(); - HaveRunPost = 3; - } else { - // Copy the BIOS making sure to only reset HaveRunPost at end - make_bios_writable(); - u32 cstart = SYMBOL(code32flat_start), cend = SYMBOL(code32flat_end); - memcpy((void*)cstart, flash + cstart, hrp - cstart); - memcpy((void*)hrp + 4, flash + hrp + 4, cend - (hrp + 4)); - barrier(); - HaveRunPost = 0; - barrier(); - } - - // Request a QEMU system reset. Do the reset in this function as - // the BIOS code was overwritten above and not all BIOS - // functionality may be available. - - // Attempt PCI style reset - outb(0x02, PORT_PCI_REBOOT); - outb(0x06, PORT_PCI_REBOOT); - - // Next try triple faulting the CPU to force a reset - asm volatile("int3"); -} diff --git a/payloads/external/SeaBIOS/src/fw/smbios.c b/payloads/external/SeaBIOS/src/fw/smbios.c deleted file mode 100644 index 62a563b2..00000000 --- a/payloads/external/SeaBIOS/src/fw/smbios.c +++ /dev/null @@ -1,589 +0,0 @@ -// smbios table generation (on emulators) -// DO NOT ADD NEW FEATURES HERE. (See paravirt.c / biostables.c instead.) -// -// Copyright (C) 2008,2009 Kevin O'Connor <kevin@koconnor.net> -// Copyright (C) 2006 Fabrice Bellard -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "config.h" // CONFIG_* -#include "malloc.h" // free -#include "output.h" // dprintf -#include "paravirt.h" // RamSize -#include "romfile.h" // romfile_findprefix -#include "std/smbios.h" // struct smbios_entry_point -#include "string.h" // memset -#include "util.h" // MaxCountCPUs -#include "x86.h" // cpuid - -static void -smbios_entry_point_setup(u16 max_structure_size, - u16 structure_table_length, - void *structure_table_address, - u16 number_of_structures) -{ - void *finaltable; - if (structure_table_length <= BUILD_MAX_SMBIOS_FSEG) - // Table is small enough for f-seg - allocate there. This - // works around a bug in JunOS (at least for small SMBIOS tables). - finaltable = malloc_fseg(structure_table_length); - else - finaltable = malloc_high(structure_table_length); - if (!finaltable) { - warn_noalloc(); - return; - } - memcpy(finaltable, structure_table_address, structure_table_length); - - struct smbios_entry_point ep; - memset(&ep, 0, sizeof(ep)); - ep.signature = SMBIOS_SIGNATURE; - ep.length = 0x1f; - ep.smbios_major_version = 2; - ep.smbios_minor_version = 4; - ep.max_structure_size = max_structure_size; - memcpy(ep.intermediate_anchor_string, "_DMI_", 5); - - ep.structure_table_length = structure_table_length; - ep.structure_table_address = (u32)finaltable; - ep.number_of_structures = number_of_structures; - ep.smbios_bcd_revision = 0x24; - - ep.checksum -= checksum(&ep, 0x10); - - ep.intermediate_checksum -= checksum((void*)&ep + 0x10, ep.length - 0x10); - - copy_smbios(&ep); -} - -static int -get_field(int type, int offset, void *dest) -{ - char name[128]; - snprintf(name, sizeof(name), "smbios/field%d-%d", type, offset); - struct romfile_s *file = romfile_find(name); - if (!file) - return 0; - file->copy(file, dest, file->size); - return file->size; -} - -static int -get_external(int type, char **p, unsigned *nr_structs, - unsigned *max_struct_size, char *end) -{ - static u64 used_bitmap[4] = { 0 }; - char *start = *p; - - /* Check if we've already reported these tables */ - if (used_bitmap[(type >> 6) & 0x3] & (1ULL << (type & 0x3f))) - return 1; - - /* Don't introduce spurious end markers */ - if (type == 127) - return 0; - - char prefix[128]; - snprintf(prefix, sizeof(prefix), "smbios/table%d-", type); - struct romfile_s *file = NULL; - for (;;) { - file = romfile_findprefix(prefix, file); - if (!file) - break; - - if (end - *p < file->size) { - warn_noalloc(); - break; - } - - struct smbios_structure_header *header = (void*)*p; - file->copy(file, header, file->size); - *p += file->size; - - /* Entries end with a double NULL char, if there's a string at - * the end (length is greater than formatted length), the string - * terminator provides the first NULL. */ - *((u8*)*p) = 0; - (*p)++; - if (header->length >= file->size) { - *((u8*)*p) = 0; - (*p)++; - } - - (*nr_structs)++; - if (*p - (char*)header > *max_struct_size) - *max_struct_size = *p - (char*)header; - } - - if (start == *p) - return 0; - - /* Mark that we've reported on this type */ - used_bitmap[(type >> 6) & 0x3] |= (1ULL << (type & 0x3f)); - return 1; -} - -#define load_str_field_with_default(type, field, def) \ - do { \ - size = get_field(type, offsetof(struct smbios_type_##type, \ - field), end); \ - if (size == 1) { \ - /* zero-length string, skip to avoid bogus end marker */ \ - p->field = 0; \ - } else if (size > 1) { \ - end += size; \ - p->field = ++str_index; \ - } else { \ - memcpy(end, def, sizeof(def)); \ - end += sizeof(def); \ - p->field = ++str_index; \ - } \ - } while (0) - -#define load_str_field_or_skip(type, field) \ - do { \ - size = get_field(type, offsetof(struct smbios_type_##type, \ - field), end); \ - if (size > 1) { \ - end += size; \ - p->field = ++str_index; \ - } else { \ - p->field = 0; \ - } \ - } while (0) - -#define set_field_with_default(type, field, def) \ - do { \ - if (!get_field(type, offsetof(struct smbios_type_##type, \ - field), &p->field)) { \ - p->field = def; \ - } \ - } while (0) - -/* Type 0 -- BIOS Information */ -#define RELEASE_DATE_STR "01/01/2011" -static void * -smbios_init_type_0(void *start) -{ - struct smbios_type_0 *p = (struct smbios_type_0 *)start; - char *end = (char *)start + sizeof(struct smbios_type_0); - size_t size; - int str_index = 0; - - p->header.type = 0; - p->header.length = sizeof(struct smbios_type_0); - p->header.handle = 0; - - load_str_field_with_default(0, vendor_str, BUILD_APPNAME); - load_str_field_with_default(0, bios_version_str, BUILD_APPNAME); - - p->bios_starting_address_segment = 0xe800; - - load_str_field_with_default(0, bios_release_date_str, RELEASE_DATE_STR); - - p->bios_rom_size = 0; /* FIXME */ - - if (!get_field(0, offsetof(struct smbios_type_0, bios_characteristics), - &p->bios_characteristics)) { - memset(p->bios_characteristics, 0, 8); - /* BIOS characteristics not supported */ - p->bios_characteristics[0] = 0x08; - } - - if (!get_field(0, offsetof(struct smbios_type_0, - bios_characteristics_extension_bytes), - &p->bios_characteristics_extension_bytes)) { - p->bios_characteristics_extension_bytes[0] = 0; - /* Enable targeted content distribution. Needed for SVVP */ - p->bios_characteristics_extension_bytes[1] = 4; - } - - set_field_with_default(0, system_bios_major_release, 1); - set_field_with_default(0, system_bios_minor_release, 0); - set_field_with_default(0, embedded_controller_major_release, 0xff); - set_field_with_default(0, embedded_controller_minor_release, 0xff); - - *end = 0; - end++; - if (!str_index) { - *end = 0; - end++; - } - - return end; -} - -/* Type 1 -- System Information */ -static void * -smbios_init_type_1(void *start) -{ - struct smbios_type_1 *p = (struct smbios_type_1 *)start; - char *end = (char *)start + sizeof(struct smbios_type_1); - size_t size; - int str_index = 0; - - p->header.type = 1; - p->header.length = sizeof(struct smbios_type_1); - p->header.handle = 0x100; - - load_str_field_with_default(1, manufacturer_str, BUILD_APPNAME); - load_str_field_with_default(1, product_name_str, BUILD_APPNAME); - load_str_field_or_skip(1, version_str); - load_str_field_or_skip(1, serial_number_str); - - if (!get_field(1, offsetof(struct smbios_type_1, uuid), &p->uuid)) - memset(p->uuid, 0, 16); - - set_field_with_default(1, wake_up_type, 0x06); /* power switch */ - - load_str_field_or_skip(1, sku_number_str); - load_str_field_or_skip(1, family_str); - - *end = 0; - end++; - if (!str_index) { - *end = 0; - end++; - } - - return end; -} - -/* Type 3 -- System Enclosure */ -static void * -smbios_init_type_3(void *start) -{ - struct smbios_type_3 *p = (struct smbios_type_3 *)start; - char *end = (char *)start + sizeof(struct smbios_type_3); - size_t size; - int str_index = 0; - - p->header.type = 3; - p->header.length = sizeof(struct smbios_type_3); - p->header.handle = 0x300; - - load_str_field_with_default(3, manufacturer_str, BUILD_APPNAME); - set_field_with_default(3, type, 0x01); /* other */ - - load_str_field_or_skip(3, version_str); - load_str_field_or_skip(3, serial_number_str); - load_str_field_or_skip(3, asset_tag_number_str); - - set_field_with_default(3, boot_up_state, 0x03); /* safe */ - set_field_with_default(3, power_supply_state, 0x03); /* safe */ - set_field_with_default(3, thermal_state, 0x03); /* safe */ - set_field_with_default(3, security_status, 0x02); /* unknown */ - - set_field_with_default(3, oem_defined, 0); - set_field_with_default(3, height, 0); - set_field_with_default(3, number_of_power_cords, 0); - set_field_with_default(3, contained_element_count, 0); - - *end = 0; - end++; - if (!str_index) { - *end = 0; - end++; - } - - return end; -} - -/* Type 4 -- Processor Information */ -static void * -smbios_init_type_4(void *start, unsigned int cpu_number) -{ - struct smbios_type_4 *p = (struct smbios_type_4 *)start; - char *end = (char *)start + sizeof(struct smbios_type_4); - size_t size; - int str_index = 0; - char name[1024]; - - p->header.type = 4; - p->header.length = sizeof(struct smbios_type_4); - p->header.handle = 0x400 + cpu_number; - - size = get_field(4, offsetof(struct smbios_type_4, socket_designation_str), - name); - if (size) - snprintf(name + size - 1, sizeof(name) - size, "%2x", cpu_number); - else - snprintf(name, sizeof(name), "CPU%2x", cpu_number); - - memcpy(end, name, strlen(name) + 1); - end += strlen(name) + 1; - p->socket_designation_str = ++str_index; - - set_field_with_default(4, processor_type, 0x03); /* CPU */ - set_field_with_default(4, processor_family, 0x01); /* other */ - - load_str_field_with_default(4, processor_manufacturer_str, BUILD_APPNAME); - - if (!get_field(4, offsetof(struct smbios_type_4, processor_id) - , p->processor_id)) { - u32 cpuid_signature, ebx, ecx, cpuid_features; - cpuid(1, &cpuid_signature, &ebx, &ecx, &cpuid_features); - p->processor_id[0] = cpuid_signature; - p->processor_id[1] = cpuid_features; - } - - load_str_field_or_skip(4, processor_version_str); - set_field_with_default(4, voltage, 0); - set_field_with_default(4, external_clock, 0); - - set_field_with_default(4, max_speed, 2000); - set_field_with_default(4, current_speed, 2000); - - set_field_with_default(4, status, 0x41); /* socket populated, CPU enabled */ - set_field_with_default(4, processor_upgrade, 0x01); /* other */ - - /* cache information structure not provided */ - p->l1_cache_handle = 0xffff; - p->l2_cache_handle = 0xffff; - p->l3_cache_handle = 0xffff; - - *end = 0; - end++; - if (!str_index) { - *end = 0; - end++; - } - - return end; -} - -/* Type 16 -- Physical Memory Array */ -static void * -smbios_init_type_16(void *start, u32 memory_size_mb, int nr_mem_devs) -{ - struct smbios_type_16 *p = (struct smbios_type_16*)start; - - p->header.type = 16; - p->header.length = sizeof(struct smbios_type_16); - p->header.handle = 0x1000; - - set_field_with_default(16, location, 0x01); /* other */ - set_field_with_default(16, use, 0x03); /* system memory */ - /* Multi-bit ECC to make Microsoft happy */ - set_field_with_default(16, error_correction, 0x06); - /* 0x80000000 = unknown, accept sizes < 2TB - TODO multiple arrays */ - p->maximum_capacity = memory_size_mb < 2 << 20 ? - memory_size_mb << 10 : 0x80000000; - p->memory_error_information_handle = 0xfffe; /* none provided */ - p->number_of_memory_devices = nr_mem_devs; - - start += sizeof(struct smbios_type_16); - *((u16 *)start) = 0; - - return start + 2; -} - -/* Type 17 -- Memory Device */ -static void * -smbios_init_type_17(void *start, u32 size_mb, int instance) -{ - struct smbios_type_17 *p = (struct smbios_type_17 *)start; - char *end = (char *)start + sizeof(struct smbios_type_17); - size_t size; - int str_index = 0; - char name[1024]; - - p->header.type = 17; - p->header.length = sizeof(struct smbios_type_17); - p->header.handle = 0x1100 + instance; - - p->physical_memory_array_handle = 0x1000; - set_field_with_default(17, total_width, 64); - set_field_with_default(17, data_width, 64); -/* TODO: should assert in case something is wrong ASSERT((memory_size_mb & ~0x7fff) == 0); */ - p->size = size_mb; - set_field_with_default(17, form_factor, 0x09); /* DIMM */ - p->device_set = 0; - - size = get_field(17, offsetof(struct smbios_type_17, device_locator_str), - name); - if (size) - snprintf(name + size - 1, sizeof(name) - size, "%d", instance); - else - snprintf(name, sizeof(name), "DIMM %d", instance); - - memcpy(end, name, strlen(name) + 1); - end += strlen(name) + 1; - p->device_locator_str = ++str_index; - - load_str_field_or_skip(17, bank_locator_str); - set_field_with_default(17, memory_type, 0x07); /* RAM */ - set_field_with_default(17, type_detail, 0); - - *end = 0; - end++; - if (!str_index) { - *end = 0; - end++; - } - - return end; -} - -/* Type 19 -- Memory Array Mapped Address */ -static void * -smbios_init_type_19(void *start, u32 start_mb, u32 size_mb, int instance) -{ - struct smbios_type_19 *p = (struct smbios_type_19 *)start; - - p->header.type = 19; - p->header.length = sizeof(struct smbios_type_19); - p->header.handle = 0x1300 + instance; - - p->starting_address = start_mb << 10; - p->ending_address = p->starting_address + (size_mb << 10) - 1; - p->memory_array_handle = 0x1000; - p->partition_width = 1; - - start += sizeof(struct smbios_type_19); - *((u16 *)start) = 0; - - return start + 2; -} - -/* Type 20 -- Memory Device Mapped Address */ -static void * -smbios_init_type_20(void *start, u32 start_mb, u32 size_mb, int instance, - int dev_handle, int array_handle) -{ - struct smbios_type_20 *p = (struct smbios_type_20 *)start; - - p->header.type = 20; - p->header.length = sizeof(struct smbios_type_20); - p->header.handle = 0x1400 + instance; - - p->starting_address = start_mb << 10; - p->ending_address = p->starting_address + (size_mb << 10) - 1; - p->memory_device_handle = 0x1100 + dev_handle; - p->memory_array_mapped_address_handle = 0x1300 + array_handle; - p->partition_row_position = 1; - p->interleave_position = 0; - p->interleaved_data_depth = 0; - - start += sizeof(struct smbios_type_20); - - *((u16 *)start) = 0; - return start+2; -} - -/* Type 32 -- System Boot Information */ -static void * -smbios_init_type_32(void *start) -{ - struct smbios_type_32 *p = (struct smbios_type_32 *)start; - - p->header.type = 32; - p->header.length = sizeof(struct smbios_type_32); - p->header.handle = 0x2000; - memset(p->reserved, 0, 6); - set_field_with_default(32, boot_status, 0); /* no errors detected */ - - start += sizeof(struct smbios_type_32); - *((u16 *)start) = 0; - - return start+2; -} - -/* Type 127 -- End of Table */ -static void * -smbios_init_type_127(void *start) -{ - struct smbios_type_127 *p = (struct smbios_type_127 *)start; - - p->header.type = 127; - p->header.length = sizeof(struct smbios_type_127); - p->header.handle = 0x7f00; - - start += sizeof(struct smbios_type_127); - *((u16 *)start) = 0; - - return start + 2; -} - -#define TEMPSMBIOSSIZE (32 * 1024) - -void -smbios_legacy_setup(void) -{ - if (! CONFIG_SMBIOS) - return; - - dprintf(3, "init SMBIOS tables\n"); - - char *start = malloc_tmphigh(TEMPSMBIOSSIZE); - if (! start) { - warn_noalloc(); - return; - } - memset(start, 0, TEMPSMBIOSSIZE); - - u32 nr_structs = 0, max_struct_size = 0; - char *q, *p = start; - char *end = start + TEMPSMBIOSSIZE - sizeof(struct smbios_type_127); - -#define add_struct(type, args...) \ - do { \ - if (!get_external(type, &p, &nr_structs, &max_struct_size, end)) { \ - q = smbios_init_type_##type(args); \ - nr_structs++; \ - if ((q - p) > max_struct_size) \ - max_struct_size = q - p; \ - p = q; \ - } \ - } while (0) - - add_struct(0, p); - add_struct(1, p); - add_struct(3, p); - - int cpu_num; - for (cpu_num = 1; cpu_num <= MaxCountCPUs; cpu_num++) - add_struct(4, p, cpu_num); - - int ram_mb = (RamSize + RamSizeOver4G) >> 20; - int nr_mem_devs = (ram_mb + 0x3fff) >> 14; - add_struct(16, p, ram_mb, nr_mem_devs); - - int i, j; - for (i = 0; i < nr_mem_devs; i++) { - u32 dev_mb = ((i == (nr_mem_devs - 1)) - ? (((ram_mb - 1) & 0x3fff) + 1) - : 16384); - add_struct(17, p, dev_mb, i); - } - - add_struct(19, p, 0, RamSize >> 20, 0); - if (RamSizeOver4G) - add_struct(19, p, 4096, RamSizeOver4G >> 20, 1); - - add_struct(20, p, 0, RamSize >> 20, 0, 0, 0); - if (RamSizeOver4G) { - u32 start_mb = 4096; - for (j = 1, i = 0; i < nr_mem_devs; i++, j++) { - u32 dev_mb = ((i == (nr_mem_devs - 1)) - ? (((ram_mb - 1) & 0x3fff) + 1) - : 16384); - if (i == 0) - dev_mb -= RamSize >> 20; - - add_struct(20, p, start_mb, dev_mb, j, i, 1); - start_mb += dev_mb; - } - } - - add_struct(32, p); - /* Add any remaining provided entries before the end marker */ - for (i = 0; i < 256; i++) - get_external(i, &p, &nr_structs, &max_struct_size, end); - add_struct(127, p); - -#undef add_struct - - smbios_entry_point_setup(max_struct_size, p - start, start, nr_structs); - free(start); -} diff --git a/payloads/external/SeaBIOS/src/fw/smm.c b/payloads/external/SeaBIOS/src/fw/smm.c deleted file mode 100644 index d90e43a9..00000000 --- a/payloads/external/SeaBIOS/src/fw/smm.c +++ /dev/null @@ -1,269 +0,0 @@ -// System Management Mode support (on emulators) -// -// Copyright (C) 2008-2014 Kevin O'Connor <kevin@koconnor.net> -// Copyright (C) 2006 Fabrice Bellard -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "config.h" // CONFIG_* -#include "dev-q35.h" -#include "dev-piix.h" -#include "hw/pci.h" // pci_config_writel -#include "hw/pcidevice.h" // pci_find_device -#include "hw/pci_ids.h" // PCI_VENDOR_ID_INTEL -#include "hw/pci_regs.h" // PCI_DEVICE_ID -#include "output.h" // dprintf -#include "paravirt.h" // PORT_SMI_STATUS -#include "stacks.h" // HaveSmmCall32 -#include "string.h" // memcpy -#include "util.h" // smm_setup -#include "x86.h" // wbinvd - -/* - * Check SMM state save area format (bits 0-15) and require support - * for SMBASE relocation. - */ -#define SMM_REV_MASK 0x0002ffff - -#define SMM_REV_I32 0x00020000 -#define SMM_REV_I64 0x00020064 - -struct smm_state { - union { - struct { - u8 pad_000[0xf8]; - u32 smm_base; - u32 smm_rev; - u8 pad_100[0xd0]; - u32 eax, ecx, edx, ebx, esp, ebp, esi, edi, eip, eflags; - u8 pad_1f8[0x08]; - } i32; - struct { - u8 pad_000[0xfc]; - u32 smm_rev; - u32 smm_base; - u8 pad_104[0x6c]; - u64 rflags, rip, r15, r14, r13, r12, r11, r10, r9, r8; - u64 rdi, rsi, rbp, rsp, rbx, rdx, rcx, rax; - } i64; - }; -}; - -struct smm_layout { - struct smm_state backup1; - struct smm_state backup2; - u32 backup_a20; - u8 stack[0x8000 - sizeof(struct smm_state)*2 - sizeof(u32)]; - u64 codeentry; - u8 pad_8008[0x7df8]; - struct smm_state cpu; -}; - -void VISIBLE32FLAT -handle_smi(u16 cs) -{ - if (!CONFIG_USE_SMM) - return; - u8 cmd = inb(PORT_SMI_CMD); - struct smm_layout *smm = MAKE_FLATPTR(cs, 0); - u32 rev = smm->cpu.i32.smm_rev & SMM_REV_MASK; - dprintf(DEBUG_HDL_smi, "handle_smi cmd=%x smbase=%p\n", cmd, smm); - - if (smm == (void*)BUILD_SMM_INIT_ADDR) { - // relocate SMBASE to 0xa0000 - if (rev == SMM_REV_I32) { - smm->cpu.i32.smm_base = BUILD_SMM_ADDR; - } else if (rev == SMM_REV_I64) { - smm->cpu.i64.smm_base = BUILD_SMM_ADDR; - } else { - warn_internalerror(); - return; - } - // indicate to smm_relocate_and_restore() that the SMM code was executed - outb(0x00, PORT_SMI_STATUS); - - if (CONFIG_CALL32_SMM) { - // Backup current cpu state for SMM trampolining - struct smm_layout *newsmm = (void*)BUILD_SMM_ADDR; - memcpy(&newsmm->backup1, &smm->cpu, sizeof(newsmm->backup1)); - memcpy(&newsmm->backup2, &smm->cpu, sizeof(newsmm->backup2)); - HaveSmmCall32 = 1; - } - - return; - } - - if (CONFIG_CALL32_SMM && cmd == CALL32SMM_CMDID) { - if (rev == SMM_REV_I32) { - u32 regs[8]; - memcpy(regs, &smm->cpu.i32.eax, sizeof(regs)); - if (smm->cpu.i32.ecx == CALL32SMM_ENTERID) { - dprintf(9, "smm cpu call pc=%x esp=%x\n", regs[3], regs[4]); - memcpy(&smm->backup2, &smm->cpu, sizeof(smm->backup2)); - memcpy(&smm->cpu, &smm->backup1, sizeof(smm->cpu)); - memcpy(&smm->cpu.i32.eax, regs, sizeof(regs)); - smm->cpu.i32.eip = regs[3]; - // Enable a20 and backup its previous state - smm->backup_a20 = set_a20(1); - } else if (smm->cpu.i32.ecx == CALL32SMM_RETURNID) { - dprintf(9, "smm cpu ret %x esp=%x\n", regs[3], regs[4]); - memcpy(&smm->cpu, &smm->backup2, sizeof(smm->cpu)); - memcpy(&smm->cpu.i32.eax, regs, sizeof(regs)); - if (!smm->backup_a20) - set_a20(0); - smm->cpu.i32.eip = regs[3]; - } - } else if (rev == SMM_REV_I64) { - u64 regs[8]; - memcpy(regs, &smm->cpu.i64.rdi, sizeof(regs)); - if ((u32)smm->cpu.i64.rcx == CALL32SMM_ENTERID) { - memcpy(&smm->backup2, &smm->cpu, sizeof(smm->backup2)); - memcpy(&smm->cpu, &smm->backup1, sizeof(smm->cpu)); - memcpy(&smm->cpu.i64.rdi, regs, sizeof(regs)); - smm->cpu.i64.rip = (u32)regs[4]; - // Enable a20 and backup its previous state - smm->backup_a20 = set_a20(1); - } else if ((u32)smm->cpu.i64.rcx == CALL32SMM_RETURNID) { - memcpy(&smm->cpu, &smm->backup2, sizeof(smm->cpu)); - memcpy(&smm->cpu.i64.rdi, regs, sizeof(regs)); - if (!smm->backup_a20) - set_a20(0); - smm->cpu.i64.rip = (u32)regs[4]; - } - } - } -} - -extern void entry_smi(void); -// movw %cs, %ax; ljmpw $SEG_BIOS, $(entry_smi - BUILD_BIOS_ADDR) -#define SMI_INSN (0xeac88c | ((u64)SEG_BIOS<<40) \ - | ((u64)((u32)entry_smi - BUILD_BIOS_ADDR) << 24)) - -static void -smm_save_and_copy(void) -{ - // save original memory content - struct smm_layout *initsmm = (void*)BUILD_SMM_INIT_ADDR; - struct smm_layout *smm = (void*)BUILD_SMM_ADDR; - memcpy(&smm->cpu, &initsmm->cpu, sizeof(smm->cpu)); - memcpy(&smm->codeentry, &initsmm->codeentry, sizeof(smm->codeentry)); - - // Setup code entry point. - initsmm->codeentry = SMI_INSN; -} - -static void -smm_relocate_and_restore(void) -{ - /* init APM status port */ - outb(0x01, PORT_SMI_STATUS); - - /* raise an SMI interrupt */ - outb(0x00, PORT_SMI_CMD); - - /* wait until SMM code executed */ - while (inb(PORT_SMI_STATUS) != 0x00) - ; - - /* restore original memory content */ - struct smm_layout *initsmm = (void*)BUILD_SMM_INIT_ADDR; - struct smm_layout *smm = (void*)BUILD_SMM_ADDR; - memcpy(&initsmm->cpu, &smm->cpu, sizeof(initsmm->cpu)); - memcpy(&initsmm->codeentry, &smm->codeentry, sizeof(initsmm->codeentry)); - - // Setup code entry point. - smm->codeentry = SMI_INSN; - wbinvd(); -} - -// This code is hardcoded for PIIX4 Power Management device. -static void piix4_apmc_smm_setup(int isabdf, int i440_bdf) -{ - /* check if SMM init is already done */ - u32 value = pci_config_readl(isabdf, PIIX_DEVACTB); - if (value & PIIX_DEVACTB_APMC_EN) - return; - - /* enable the SMM memory window */ - pci_config_writeb(i440_bdf, I440FX_SMRAM, 0x02 | 0x48); - - smm_save_and_copy(); - - /* enable SMI generation when writing to the APMC register */ - pci_config_writel(isabdf, PIIX_DEVACTB, value | PIIX_DEVACTB_APMC_EN); - - /* enable SMI generation */ - value = inl(acpi_pm_base + PIIX_PMIO_GLBCTL); - outl(value | PIIX_PMIO_GLBCTL_SMI_EN, acpi_pm_base + PIIX_PMIO_GLBCTL); - - smm_relocate_and_restore(); - - /* close the SMM memory window and enable normal SMM */ - pci_config_writeb(i440_bdf, I440FX_SMRAM, 0x02 | 0x08); -} - -/* PCI_VENDOR_ID_INTEL && PCI_DEVICE_ID_INTEL_ICH9_LPC */ -void ich9_lpc_apmc_smm_setup(int isabdf, int mch_bdf) -{ - /* check if SMM init is already done */ - u32 value = inl(acpi_pm_base + ICH9_PMIO_SMI_EN); - if (value & ICH9_PMIO_SMI_EN_APMC_EN) - return; - - /* enable the SMM memory window */ - pci_config_writeb(mch_bdf, Q35_HOST_BRIDGE_SMRAM, 0x02 | 0x48); - - smm_save_and_copy(); - - /* enable SMI generation when writing to the APMC register */ - outl(value | ICH9_PMIO_SMI_EN_APMC_EN | ICH9_PMIO_SMI_EN_GLB_SMI_EN, - acpi_pm_base + ICH9_PMIO_SMI_EN); - - /* lock SMI generation */ - value = pci_config_readw(isabdf, ICH9_LPC_GEN_PMCON_1); - pci_config_writel(isabdf, ICH9_LPC_GEN_PMCON_1, - value | ICH9_LPC_GEN_PMCON_1_SMI_LOCK); - - smm_relocate_and_restore(); - - /* close the SMM memory window and enable normal SMM */ - pci_config_writeb(mch_bdf, Q35_HOST_BRIDGE_SMRAM, 0x02 | 0x08); -} - -static int SMMISADeviceBDF = -1, SMMPMDeviceBDF = -1; - -void -smm_device_setup(void) -{ - if (!CONFIG_USE_SMM) - return; - - struct pci_device *isapci, *pmpci; - isapci = pci_find_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3); - pmpci = pci_find_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82441); - if (isapci && pmpci) { - SMMISADeviceBDF = isapci->bdf; - SMMPMDeviceBDF = pmpci->bdf; - return; - } - isapci = pci_find_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_LPC); - pmpci = pci_find_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_Q35_MCH); - if (isapci && pmpci) { - SMMISADeviceBDF = isapci->bdf; - SMMPMDeviceBDF = pmpci->bdf; - } -} - -void -smm_setup(void) -{ - if (!CONFIG_USE_SMM || SMMISADeviceBDF < 0) - return; - - dprintf(3, "init smm\n"); - u16 device = pci_config_readw(SMMISADeviceBDF, PCI_DEVICE_ID); - if (device == PCI_DEVICE_ID_INTEL_82371AB_3) - piix4_apmc_smm_setup(SMMISADeviceBDF, SMMPMDeviceBDF); - else - ich9_lpc_apmc_smm_setup(SMMISADeviceBDF, SMMPMDeviceBDF); -} diff --git a/payloads/external/SeaBIOS/src/fw/smp.c b/payloads/external/SeaBIOS/src/fw/smp.c deleted file mode 100644 index 46d1da17..00000000 --- a/payloads/external/SeaBIOS/src/fw/smp.c +++ /dev/null @@ -1,194 +0,0 @@ -// QEMU multi-CPU initialization code -// -// Copyright (C) 2008 Kevin O'Connor <kevin@koconnor.net> -// Copyright (C) 2006 Fabrice Bellard -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "config.h" // CONFIG_* -#include "hw/rtc.h" // CMOS_BIOS_SMP_COUNT -#include "output.h" // dprintf -#include "romfile.h" // romfile_loadint -#include "stacks.h" // yield -#include "util.h" // smp_setup, msr_feature_control_setup -#include "x86.h" // wrmsr -#include "paravirt.h" // qemu_*_present_cpus_count - -#define APIC_ICR_LOW ((u8*)BUILD_APIC_ADDR + 0x300) -#define APIC_SVR ((u8*)BUILD_APIC_ADDR + 0x0F0) -#define APIC_LINT0 ((u8*)BUILD_APIC_ADDR + 0x350) -#define APIC_LINT1 ((u8*)BUILD_APIC_ADDR + 0x360) - -#define APIC_ENABLED 0x0100 -#define MSR_IA32_APIC_BASE 0x01B -#define MSR_LOCAL_APIC_ID 0x802 -#define MSR_IA32_APICBASE_EXTD (1ULL << 10) /* Enable x2APIC mode */ - -static struct { u32 index; u64 val; } smp_msr[32]; -static u32 smp_msr_count; - -void -wrmsr_smp(u32 index, u64 val) -{ - wrmsr(index, val); - if (smp_msr_count >= ARRAY_SIZE(smp_msr)) { - warn_noalloc(); - return; - } - smp_msr[smp_msr_count].index = index; - smp_msr[smp_msr_count].val = val; - smp_msr_count++; -} - -static void -smp_write_msrs(void) -{ - // MTRR and MSR_IA32_FEATURE_CONTROL setup - int i; - for (i=0; i<smp_msr_count; i++) - wrmsr(smp_msr[i].index, smp_msr[i].val); -} - -u32 MaxCountCPUs; -static u32 CountCPUs; -// 256 bits for the found APIC IDs -static u32 FoundAPICIDs[256/32]; - -int apic_id_is_present(u8 apic_id) -{ - return !!(FoundAPICIDs[apic_id/32] & (1ul << (apic_id % 32))); -} - -static int -apic_id_init(void) -{ - u32 eax, ebx, ecx, cpuid_features; - cpuid(1, &eax, &ebx, &ecx, &cpuid_features); - u32 apic_id = ebx>>24; - if (MaxCountCPUs < 256) { // xAPIC mode - // Track found apic id for use in legacy internal bios tables - FoundAPICIDs[apic_id/32] |= 1 << (apic_id % 32); - } else if (ecx & CPUID_X2APIC) { - // switch to x2APIC mode - u64 apic_base = rdmsr(MSR_IA32_APIC_BASE); - wrmsr(MSR_IA32_APIC_BASE, apic_base | MSR_IA32_APICBASE_EXTD); - apic_id = rdmsr(MSR_LOCAL_APIC_ID); - } else { - // x2APIC is masked by CPUID - apic_id = -1; - } - return apic_id; -} - -void VISIBLE32FLAT -handle_smp(void) -{ - if (!CONFIG_QEMU) - return; - - // Track this CPU and detect the apic_id - int apic_id = apic_id_init(); - dprintf(DEBUG_HDL_smp, "handle_smp: apic_id=0x%x\n", apic_id); - - smp_write_msrs(); - - CountCPUs++; -} - -// Atomic lock for shared stack across processors. -u32 SMPLock __VISIBLE; -u32 SMPStack __VISIBLE; - -// find and initialize the CPUs by launching a SIPI to them -static void -smp_scan(void) -{ - ASSERT32FLAT(); - u32 eax, ebx, ecx, cpuid_features; - cpuid(1, &eax, &ebx, &ecx, &cpuid_features); - if (eax < 1 || !(cpuid_features & CPUID_APIC)) { - // No apic - only the main cpu is present. - dprintf(1, "No apic - only the main cpu is present.\n"); - CountCPUs= 1; - return; - } - - // mark the BSP initial APIC ID as found, too: - CountCPUs = 1; - - // Setup jump trampoline to counter code. - u64 old = *(u64*)BUILD_AP_BOOT_ADDR; - // ljmpw $SEG_BIOS, $(entry_smp - BUILD_BIOS_ADDR) - extern void entry_smp(void); - u64 new = (0xea | ((u64)SEG_BIOS<<24) - | (((u32)entry_smp - BUILD_BIOS_ADDR) << 8)); - *(u64*)BUILD_AP_BOOT_ADDR = new; - - // enable local APIC - u32 val = readl(APIC_SVR); - writel(APIC_SVR, val | APIC_ENABLED); - - /* Set LINT0 as Ext_INT, level triggered */ - writel(APIC_LINT0, 0x8700); - - /* Set LINT1 as NMI, level triggered */ - writel(APIC_LINT1, 0x8400); - - // Init the lock. - writel(&SMPLock, 1); - - // broadcast SIPI - barrier(); - writel(APIC_ICR_LOW, 0x000C4500); - u32 sipi_vector = BUILD_AP_BOOT_ADDR >> 12; - writel(APIC_ICR_LOW, 0x000C4600 | sipi_vector); - - // switch to x2APIC mode after sending SIPI so that - // x2APIC and xAPIC mode could share AP wake up code - apic_id_init(); - - // Wait for other CPUs to process the SIPI. - u16 expected_cpus_count = qemu_get_present_cpus_count(); - while (expected_cpus_count != CountCPUs) - asm volatile( - // Release lock and allow other processors to use the stack. - " movl %%esp, %1\n" - " movl $0, %0\n" - // Reacquire lock and take back ownership of stack. - "1:rep ; nop\n" - " lock btsl $0, %0\n" - " jc 1b\n" - : "+m" (SMPLock), "+m" (SMPStack) - : : "cc", "memory"); - yield(); - - // Restore memory. - *(u64*)BUILD_AP_BOOT_ADDR = old; - - dprintf(1, "Found %d cpu(s) max supported %d cpu(s)\n", CountCPUs, - MaxCountCPUs); -} - -void -smp_setup(void) -{ - if (!CONFIG_QEMU) - return; - - MaxCountCPUs = romfile_loadint("etc/max-cpus", 0); - u16 smp_count = qemu_get_present_cpus_count(); - if (MaxCountCPUs < smp_count) - MaxCountCPUs = smp_count; - - smp_scan(); -} - -void -smp_resume(void) -{ - if (!CONFIG_QEMU) - return; - - smp_write_msrs(); - smp_scan(); -} diff --git a/payloads/external/SeaBIOS/src/fw/ssdt-misc.dsl b/payloads/external/SeaBIOS/src/fw/ssdt-misc.dsl deleted file mode 100644 index d1d2c9e3..00000000 --- a/payloads/external/SeaBIOS/src/fw/ssdt-misc.dsl +++ /dev/null @@ -1,104 +0,0 @@ -ACPI_EXTRACT_ALL_CODE ssdp_misc_aml - -DefinitionBlock ("ssdt-misc.aml", "SSDT", 0x01, "BXPC", "BXSSDTSU", 0x1) -{ - -/**************************************************************** - * PCI memory ranges - ****************************************************************/ - - Scope(\) { - ACPI_EXTRACT_NAME_DWORD_CONST acpi_pci32_start - Name(P0S, 0x12345678) - ACPI_EXTRACT_NAME_DWORD_CONST acpi_pci32_end - Name(P0E, 0x12345678) - ACPI_EXTRACT_NAME_BYTE_CONST acpi_pci64_valid - Name(P1V, 0x12) - ACPI_EXTRACT_NAME_BUFFER8 acpi_pci64_start - Name(P1S, Buffer() { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }) - ACPI_EXTRACT_NAME_BUFFER8 acpi_pci64_end - Name(P1E, Buffer() { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }) - ACPI_EXTRACT_NAME_BUFFER8 acpi_pci64_length - Name(P1L, Buffer() { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }) - } - - -/**************************************************************** - * Suspend - ****************************************************************/ - - Scope(\) { - /* - * S3 (suspend-to-ram), S4 (suspend-to-disk) and S5 (power-off) type codes: - * must match piix4 emulation. - */ - - ACPI_EXTRACT_NAME_STRING acpi_s3_name - Name(_S3, Package(0x04) { - One, /* PM1a_CNT.SLP_TYP */ - One, /* PM1b_CNT.SLP_TYP */ - Zero, /* reserved */ - Zero /* reserved */ - }) - ACPI_EXTRACT_NAME_STRING acpi_s4_name - ACPI_EXTRACT_PKG_START acpi_s4_pkg - Name(_S4, Package(0x04) { - 0x2, /* PM1a_CNT.SLP_TYP */ - 0x2, /* PM1b_CNT.SLP_TYP */ - Zero, /* reserved */ - Zero /* reserved */ - }) - Name(_S5, Package(0x04) { - Zero, /* PM1a_CNT.SLP_TYP */ - Zero, /* PM1b_CNT.SLP_TYP */ - Zero, /* reserved */ - Zero /* reserved */ - }) - } - - External(\_SB.PCI0, DeviceObj) - External(\_SB.PCI0.ISA, DeviceObj) - - Scope(\_SB.PCI0.ISA) { - Device(PEVT) { - Name(_HID, "QEMU0001") - /* PEST will be patched to be Zero if no such device */ - ACPI_EXTRACT_NAME_WORD_CONST ssdt_isa_pest - Name(PEST, 0xFFFF) - OperationRegion(PEOR, SystemIO, PEST, 0x01) - Field(PEOR, ByteAcc, NoLock, Preserve) { - PEPT, 8, - } - - Method(_STA, 0, NotSerialized) { - Store(PEST, Local0) - If (LEqual(Local0, Zero)) { - Return (0x00) - } Else { - Return (0x0F) - } - } - - Method(RDPT, 0, NotSerialized) { - Store(PEPT, Local0) - Return (Local0) - } - - Method(WRPT, 1, NotSerialized) { - Store(Arg0, PEPT) - } - - Name(_CRS, ResourceTemplate() { - IO(Decode16, 0x00, 0x00, 0x01, 0x01, IO) - }) - - CreateWordField(_CRS, IO._MIN, IOMN) - CreateWordField(_CRS, IO._MAX, IOMX) - - Method(_INI, 0, NotSerialized) { - Store(PEST, IOMN) - Store(PEST, IOMX) - } - } - } -} diff --git a/payloads/external/SeaBIOS/src/fw/ssdt-misc.hex b/payloads/external/SeaBIOS/src/fw/ssdt-misc.hex deleted file mode 100644 index 6eb1c6df..00000000 --- a/payloads/external/SeaBIOS/src/fw/ssdt-misc.hex +++ /dev/null @@ -1,88 +0,0 @@ -/* DO NOT EDIT! This is an autogenerated file. See scripts/acpi_extract.py. */ -static unsigned char acpi_pci64_length[] = { - 0x6f -}; - -static unsigned char acpi_s4_pkg[] = { - 0x8f -}; - -static unsigned char acpi_s3_name[] = { - 0x7c -}; - -static unsigned char acpi_pci32_start[] = { - 0x2f -}; - -static unsigned char acpi_pci64_valid[] = { - 0x43 -}; - -static unsigned char ssdp_misc_aml[] = { - 0x53, 0x53, 0x44, 0x54, 0x62, 0x01, 0x00, 0x00, - 0x01, 0x7f, 0x42, 0x58, 0x50, 0x43, 0x00, 0x00, - 0x42, 0x58, 0x53, 0x53, 0x44, 0x54, 0x53, 0x55, - 0x01, 0x00, 0x00, 0x00, 0x49, 0x4e, 0x54, 0x4c, - 0x18, 0x08, 0x15, 0x20, 0x10, 0x42, 0x05, 0x5c, - 0x00, 0x08, 0x50, 0x30, 0x53, 0x5f, 0x0c, 0x78, - 0x56, 0x34, 0x12, 0x08, 0x50, 0x30, 0x45, 0x5f, - 0x0c, 0x78, 0x56, 0x34, 0x12, 0x08, 0x50, 0x31, - 0x56, 0x5f, 0x0a, 0x12, 0x08, 0x50, 0x31, 0x53, - 0x5f, 0x11, 0x0b, 0x0a, 0x08, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x50, 0x31, - 0x45, 0x5f, 0x11, 0x0b, 0x0a, 0x08, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x50, - 0x31, 0x4c, 0x5f, 0x11, 0x0b, 0x0a, 0x08, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, - 0x29, 0x5c, 0x00, 0x08, 0x5f, 0x53, 0x33, 0x5f, - 0x12, 0x06, 0x04, 0x01, 0x01, 0x00, 0x00, 0x08, - 0x5f, 0x53, 0x34, 0x5f, 0x12, 0x08, 0x04, 0x0a, - 0x02, 0x0a, 0x02, 0x00, 0x00, 0x08, 0x5f, 0x53, - 0x35, 0x5f, 0x12, 0x06, 0x04, 0x00, 0x00, 0x00, - 0x00, 0x10, 0x40, 0x0c, 0x5c, 0x2f, 0x03, 0x5f, - 0x53, 0x42, 0x5f, 0x50, 0x43, 0x49, 0x30, 0x49, - 0x53, 0x41, 0x5f, 0x5b, 0x82, 0x4d, 0x0a, 0x50, - 0x45, 0x56, 0x54, 0x08, 0x5f, 0x48, 0x49, 0x44, - 0x0d, 0x51, 0x45, 0x4d, 0x55, 0x30, 0x30, 0x30, - 0x31, 0x00, 0x08, 0x50, 0x45, 0x53, 0x54, 0x0b, - 0xff, 0xff, 0x5b, 0x80, 0x50, 0x45, 0x4f, 0x52, - 0x01, 0x50, 0x45, 0x53, 0x54, 0x01, 0x5b, 0x81, - 0x0b, 0x50, 0x45, 0x4f, 0x52, 0x01, 0x50, 0x45, - 0x50, 0x54, 0x08, 0x14, 0x18, 0x5f, 0x53, 0x54, - 0x41, 0x00, 0x70, 0x50, 0x45, 0x53, 0x54, 0x60, - 0xa0, 0x06, 0x93, 0x60, 0x00, 0xa4, 0x00, 0xa1, - 0x04, 0xa4, 0x0a, 0x0f, 0x14, 0x0e, 0x52, 0x44, - 0x50, 0x54, 0x00, 0x70, 0x50, 0x45, 0x50, 0x54, - 0x60, 0xa4, 0x60, 0x14, 0x0c, 0x57, 0x52, 0x50, - 0x54, 0x01, 0x70, 0x68, 0x50, 0x45, 0x50, 0x54, - 0x08, 0x5f, 0x43, 0x52, 0x53, 0x11, 0x0d, 0x0a, - 0x0a, 0x47, 0x01, 0x00, 0x00, 0x00, 0x00, 0x01, - 0x01, 0x79, 0x00, 0x8b, 0x5f, 0x43, 0x52, 0x53, - 0x0a, 0x02, 0x49, 0x4f, 0x4d, 0x4e, 0x8b, 0x5f, - 0x43, 0x52, 0x53, 0x0a, 0x04, 0x49, 0x4f, 0x4d, - 0x58, 0x14, 0x18, 0x5f, 0x49, 0x4e, 0x49, 0x00, - 0x70, 0x50, 0x45, 0x53, 0x54, 0x49, 0x4f, 0x4d, - 0x4e, 0x70, 0x50, 0x45, 0x53, 0x54, 0x49, 0x4f, - 0x4d, 0x58 -}; - -static unsigned char ssdt_isa_pest[] = { - 0xd0 -}; - -static unsigned char acpi_s4_name[] = { - 0x88 -}; - -static unsigned char acpi_pci64_start[] = { - 0x4d -}; - -static unsigned char acpi_pci64_end[] = { - 0x5e -}; - -static unsigned char acpi_pci32_end[] = { - 0x39 -}; diff --git a/payloads/external/SeaBIOS/src/fw/ssdt-pcihp.dsl b/payloads/external/SeaBIOS/src/fw/ssdt-pcihp.dsl deleted file mode 100644 index 518a5ebf..00000000 --- a/payloads/external/SeaBIOS/src/fw/ssdt-pcihp.dsl +++ /dev/null @@ -1,36 +0,0 @@ -ACPI_EXTRACT_ALL_CODE ssdp_pcihp_aml - -DefinitionBlock ("ssdt-pcihp.aml", "SSDT", 0x01, "BXPC", "BXSSDTPC", 0x1) -{ - -/**************************************************************** - * PCI hotplug - ****************************************************************/ - - /* Objects supplied by DSDT */ - External(\_SB.PCI0, DeviceObj) - External(\_SB.PCI0.PCEJ, MethodObj) - - Scope(\_SB.PCI0) { - - /* Bulk generated PCI hotplug devices */ - ACPI_EXTRACT_DEVICE_START ssdt_pcihp_start - ACPI_EXTRACT_DEVICE_END ssdt_pcihp_end - ACPI_EXTRACT_DEVICE_STRING ssdt_pcihp_name - - // Method _EJ0 can be patched by BIOS to EJ0_ - // at runtime, if the slot is detected to not support hotplug. - // Extract the offset of the address dword and the - // _EJ0 name to allow this patching. - Device(SAA) { - ACPI_EXTRACT_NAME_BYTE_CONST ssdt_pcihp_id - Name(_SUN, 0xAA) - ACPI_EXTRACT_NAME_DWORD_CONST ssdt_pcihp_adr - Name(_ADR, 0xAA0000) - ACPI_EXTRACT_METHOD_STRING ssdt_pcihp_ej0 - Method(_EJ0, 1) { - PCEJ(_SUN) - } - } - } -} diff --git a/payloads/external/SeaBIOS/src/fw/ssdt-pcihp.hex b/payloads/external/SeaBIOS/src/fw/ssdt-pcihp.hex deleted file mode 100644 index 79b67f7a..00000000 --- a/payloads/external/SeaBIOS/src/fw/ssdt-pcihp.hex +++ /dev/null @@ -1,38 +0,0 @@ -/* DO NOT EDIT! This is an autogenerated file. See scripts/acpi_extract.py. */ -static unsigned char ssdt_pcihp_name[] = { - 0x33 -}; - -static unsigned char ssdt_pcihp_adr[] = { - 0x44 -}; - -static unsigned char ssdt_pcihp_end[] = { - 0x57 -}; - -static unsigned char ssdp_pcihp_aml[] = { - 0x53, 0x53, 0x44, 0x54, 0x57, 0x00, 0x00, 0x00, - 0x01, 0x27, 0x42, 0x58, 0x50, 0x43, 0x00, 0x00, - 0x42, 0x58, 0x53, 0x53, 0x44, 0x54, 0x50, 0x43, - 0x01, 0x00, 0x00, 0x00, 0x49, 0x4e, 0x54, 0x4c, - 0x18, 0x08, 0x15, 0x20, 0x10, 0x32, 0x5c, 0x2e, - 0x5f, 0x53, 0x42, 0x5f, 0x50, 0x43, 0x49, 0x30, - 0x5b, 0x82, 0x25, 0x53, 0x41, 0x41, 0x5f, 0x08, - 0x5f, 0x53, 0x55, 0x4e, 0x0a, 0xaa, 0x08, 0x5f, - 0x41, 0x44, 0x52, 0x0c, 0x00, 0x00, 0xaa, 0x00, - 0x14, 0x0e, 0x5f, 0x45, 0x4a, 0x30, 0x01, 0x50, - 0x43, 0x45, 0x4a, 0x5f, 0x53, 0x55, 0x4e -}; - -static unsigned char ssdt_pcihp_start[] = { - 0x30 -}; - -static unsigned char ssdt_pcihp_id[] = { - 0x3d -}; - -static unsigned char ssdt_pcihp_ej0[] = { - 0x4a -}; diff --git a/payloads/external/SeaBIOS/src/fw/ssdt-proc.dsl b/payloads/external/SeaBIOS/src/fw/ssdt-proc.dsl deleted file mode 100644 index 407d61ea..00000000 --- a/payloads/external/SeaBIOS/src/fw/ssdt-proc.dsl +++ /dev/null @@ -1,48 +0,0 @@ -/* This file is the basis for the ssdt table generated in src/acpi.c. - * It defines the contents of the per-cpu Processor() object. At - * runtime, a dynamically generated SSDT will contain one copy of this - * AML snippet for every possible cpu in the system. The objects will - * be placed in the \_SB_ namespace. - * - * In addition to the aml code generated from this file, the - * src/acpi.c file creates a NTFY method with an entry for each cpu: - * Method(NTFY, 2) { - * If (LEqual(Arg0, 0x00)) { Notify(CP00, Arg1) } - * If (LEqual(Arg0, 0x01)) { Notify(CP01, Arg1) } - * ... - * } - * and a CPON array with the list of active and inactive cpus: - * Name(CPON, Package() { One, One, ..., Zero, Zero, ... }) - */ - -ACPI_EXTRACT_ALL_CODE ssdp_proc_aml - -DefinitionBlock ("ssdt-proc.aml", "SSDT", 0x01, "BXPC", "BXSSDT", 0x1) -{ - ACPI_EXTRACT_PROCESSOR_START ssdt_proc_start - ACPI_EXTRACT_PROCESSOR_END ssdt_proc_end - ACPI_EXTRACT_PROCESSOR_STRING ssdt_proc_name - Processor(CPAA, 0xAA, 0x0000b010, 0x06) { - ACPI_EXTRACT_NAME_BYTE_CONST ssdt_proc_id - Name(ID, 0xAA) -/* - * The src/acpi.c code requires the above ACP_EXTRACT tags so that it can update - * CPAA and 0xAA with the appropriate CPU id (see - * SD_OFFSET_CPUHEX/CPUID1/CPUID2). Don't change the above without - * also updating the C code. - */ - Name(_HID, "ACPI0007") - External(CPMA, MethodObj) - External(CPST, MethodObj) - External(CPEJ, MethodObj) - Method(_MAT, 0) { - Return (CPMA(ID)) - } - Method(_STA, 0) { - Return (CPST(ID)) - } - Method(_EJ0, 1, NotSerialized) { - CPEJ(ID, Arg0) - } - } -} diff --git a/payloads/external/SeaBIOS/src/fw/ssdt-proc.hex b/payloads/external/SeaBIOS/src/fw/ssdt-proc.hex deleted file mode 100644 index b6a57784..00000000 --- a/payloads/external/SeaBIOS/src/fw/ssdt-proc.hex +++ /dev/null @@ -1,35 +0,0 @@ -/* DO NOT EDIT! This is an autogenerated file. See scripts/acpi_extract.py. */ -static unsigned char ssdt_proc_name[] = { - 0x28 -}; - -static unsigned char ssdp_proc_aml[] = { - 0x53, 0x53, 0x44, 0x54, 0x78, 0x00, 0x00, 0x00, - 0x01, 0xbb, 0x42, 0x58, 0x50, 0x43, 0x00, 0x00, - 0x42, 0x58, 0x53, 0x53, 0x44, 0x54, 0x00, 0x00, - 0x01, 0x00, 0x00, 0x00, 0x49, 0x4e, 0x54, 0x4c, - 0x18, 0x08, 0x15, 0x20, 0x5b, 0x83, 0x42, 0x05, - 0x43, 0x50, 0x41, 0x41, 0xaa, 0x10, 0xb0, 0x00, - 0x00, 0x06, 0x08, 0x49, 0x44, 0x5f, 0x5f, 0x0a, - 0xaa, 0x08, 0x5f, 0x48, 0x49, 0x44, 0x0d, 0x41, - 0x43, 0x50, 0x49, 0x30, 0x30, 0x30, 0x37, 0x00, - 0x14, 0x0f, 0x5f, 0x4d, 0x41, 0x54, 0x00, 0xa4, - 0x43, 0x50, 0x4d, 0x41, 0x49, 0x44, 0x5f, 0x5f, - 0x14, 0x0f, 0x5f, 0x53, 0x54, 0x41, 0x00, 0xa4, - 0x43, 0x50, 0x53, 0x54, 0x49, 0x44, 0x5f, 0x5f, - 0x14, 0x0f, 0x5f, 0x45, 0x4a, 0x30, 0x01, 0x43, - 0x50, 0x45, 0x4a, 0x49, 0x44, 0x5f, 0x5f, 0x68, - -}; - -static unsigned char ssdt_proc_id[] = { - 0x38 -}; - -static unsigned char ssdt_proc_end[] = { - 0x78 -}; - -static unsigned char ssdt_proc_start[] = { - 0x24 -}; diff --git a/payloads/external/SeaBIOS/src/fw/xen.c b/payloads/external/SeaBIOS/src/fw/xen.c deleted file mode 100644 index a215b9ea..00000000 --- a/payloads/external/SeaBIOS/src/fw/xen.c +++ /dev/null @@ -1,149 +0,0 @@ -// Xen HVM support -// -// Copyright (C) 2011 Citrix Systems. -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "config.h" // CONFIG_XEN -#include "e820map.h" // e820_add -#include "hw/serialio.h" // DebugOutputPort -#include "malloc.h" // memalign_high -#include "memmap.h" // PAGE_SIZE -#include "output.h" // dprintf -#include "paravirt.h" // PlatformRunningOn -#include "string.h" // memcpy -#include "util.h" // copy_acpi_rsdp -#include "x86.h" // cpuid -#include "xen.h" // xen_extraversion_t - -#define INFO_PHYSICAL_ADDRESS 0x00001000 - -u32 xen_cpuid_base = 0; -unsigned long xen_hypercall_page = 0; - -struct xen_seabios_info { - char signature[14]; /* XenHVMSeaBIOS\0 */ - u8 length; /* Length of this struct */ - u8 checksum; /* Set such that the sum over bytes 0..length == 0 */ - /* - * Physical address of an array of tables_nr elements. - * - * Each element is a 32 bit value contianing the physical address - * of a BIOS table. - */ - u32 tables; - u32 tables_nr; - /* - * Physical address of the e820 table, contains e820_nr entries. - */ - u32 e820; - u32 e820_nr; -} PACKED; - -static void validate_info(struct xen_seabios_info *t) -{ - if ( memcmp(t->signature, "XenHVMSeaBIOS", 14) ) - panic("Bad Xen info signature\n"); - - if ( t->length < sizeof(struct xen_seabios_info) ) - panic("Bad Xen info length\n"); - - if (checksum(t, t->length) != 0) - panic("Bad Xen info checksum\n"); -} - -void xen_preinit(void) -{ - u32 base, eax, ebx, ecx, edx; - char signature[13]; - - if (!CONFIG_XEN) - return; - - for (base = 0x40000000; base < 0x40010000; base += 0x100) { - cpuid(base, &eax, &ebx, &ecx, &edx); - memcpy(signature + 0, &ebx, 4); - memcpy(signature + 4, &ecx, 4); - memcpy(signature + 8, &edx, 4); - signature[12] = 0; - - dprintf(9, "Found hypervisor signature \"%s\" at %x\n", - signature, base); - if (strcmp(signature, "XenVMMXenVMM") == 0) { - /* Set debug_io_port first, so the following messages work. */ - code_mutable_preinit(); - DebugOutputPort = 0xe9; - debug_banner(); - dprintf(1, "\nFound Xen hypervisor signature at %x\n", base); - if ((eax - base) < 2) - panic("Insufficient Xen cpuid leaves. eax=%x at base %x\n", - eax, base); - xen_cpuid_base = base; - break; - } - } - if (!xen_cpuid_base) { - dprintf(1, "No Xen hypervisor found.\n"); - return; - } - PlatformRunningOn = PF_QEMU|PF_XEN; -} - -static int hypercall_xen_version( int cmd, void *arg) -{ - return _hypercall2(int, xen_version, cmd, arg); -} - -/* Fill in hypercall transfer pages. */ -void xen_hypercall_setup(void) -{ - u32 eax, ebx, ecx, edx; - xen_extraversion_t extraversion; - unsigned long i; - - if (!runningOnXen()) - return; - - cpuid(xen_cpuid_base + 2, &eax, &ebx, &ecx, &edx); - - xen_hypercall_page = (unsigned long)memalign_high(PAGE_SIZE, eax*PAGE_SIZE); - if (!xen_hypercall_page) - panic("unable to allocate Xen hypercall page\n"); - - dprintf(1, "Allocated Xen hypercall page at %lx\n", xen_hypercall_page); - for ( i = 0; i < eax; i++ ) - wrmsr(ebx, xen_hypercall_page + (i << 12) + i); - - /* Print version information. */ - cpuid(xen_cpuid_base + 1, &eax, &ebx, &ecx, &edx); - hypercall_xen_version(XENVER_extraversion, extraversion); - dprintf(1, "Detected Xen v%u.%u%s\n", eax >> 16, eax & 0xffff, extraversion); -} - -void xen_biostable_setup(void) -{ - struct xen_seabios_info *info = (void *)INFO_PHYSICAL_ADDRESS; - void **tables = (void*)info->tables; - int i; - - dprintf(1, "xen: copy BIOS tables...\n"); - for (i=0; i<info->tables_nr; i++) - copy_table(tables[i]); - - find_acpi_features(); -} - -void xen_ramsize_preinit(void) -{ - int i; - struct xen_seabios_info *info = (void *)INFO_PHYSICAL_ADDRESS; - struct e820entry *e820 = (struct e820entry *)info->e820; - validate_info(info); - - dprintf(1, "xen: copy e820...\n"); - - for (i = 0; i < info->e820_nr; i++) { - struct e820entry *e = &e820[i]; - e820_add(e->start, e->size, e->type); - } -} diff --git a/payloads/external/SeaBIOS/src/fw/xen.h b/payloads/external/SeaBIOS/src/fw/xen.h deleted file mode 100644 index f00f8407..00000000 --- a/payloads/external/SeaBIOS/src/fw/xen.h +++ /dev/null @@ -1,125 +0,0 @@ -#ifndef __XEN_H -#define __XEN_H - -void xen_preinit(void); -void xen_ramsize_preinit(void); -void xen_hypercall_setup(void); -void xen_biostable_setup(void); - -extern unsigned long xen_hypercall_page; - -#define _hypercall0(type, name) \ -({ \ - unsigned long __hentry = xen_hypercall_page+__HYPERVISOR_##name*32; \ - long __res; \ - asm volatile ( \ - "call *%%eax" \ - : "=a" (__res) \ - : "0" (__hentry) \ - : "memory" ); \ - (type)__res; \ -}) - -#define _hypercall1(type, name, a1) \ -({ \ - unsigned long __hentry = xen_hypercall_page+__HYPERVISOR_##name*32; \ - long __res, __ign1; \ - asm volatile ( \ - "call *%%eax" \ - : "=a" (__res), "=b" (__ign1) \ - : "0" (__hentry), "1" ((long)(a1)) \ - : "memory" ); \ - (type)__res; \ -}) - -#define _hypercall2(type, name, a1, a2) \ -({ \ - unsigned long __hentry = xen_hypercall_page+__HYPERVISOR_##name*32; \ - long __res, __ign1, __ign2; \ - asm volatile ( \ - "call *%%eax" \ - : "=a" (__res), "=b" (__ign1), "=c" (__ign2) \ - : "0" (__hentry), "1" ((long)(a1)), "2" ((long)(a2)) \ - : "memory" ); \ - (type)__res; \ -}) - -#define _hypercall3(type, name, a1, a2, a3) \ -({ \ - unsigned long __hentry = xen_hypercall_page+__HYPERVISOR_##name*32; \ - long __res, __ign1, __ign2, __ign3; \ - asm volatile ( \ - "call *%%eax" \ - : "=a" (__res), "=b" (__ign1), "=c" (__ign2), \ - "=d" (__ign3) \ - : "0" (__hentry), "1" ((long)(a1)), "2" ((long)(a2)), \ - "3" ((long)(a3)) \ - : "memory" ); \ - (type)__res; \ -}) - -#define _hypercall4(type, name, a1, a2, a3, a4) \ -({ \ - unsigned long __hentry = xen_hypercall_page+__HYPERVISOR_##name*32; \ - long __res, __ign1, __ign2, __ign3, __ign4; \ - asm volatile ( \ - "call *%%eax" \ - : "=a" (__res), "=b" (__ign1), "=c" (__ign2), \ - "=d" (__ign3), "=S" (__ign4) \ - : "0" (__hentry), "1" ((long)(a1)), "2" ((long)(a2)), \ - "3" ((long)(a3)), "4" ((long)(a4)) \ - : "memory" ); \ - (type)__res; \ -}) - -#define _hypercall5(type, name, a1, a2, a3, a4, a5) \ -({ \ - unsigned long __hentry = xen_hypercall_page+__HYPERVISOR_##name*32; \ - long __res, __ign1, __ign2, __ign3, __ign4, __ign5; \ - asm volatile ( \ - "call *%%eax" \ - : "=a" (__res), "=b" (__ign1), "=c" (__ign2), \ - "=d" (__ign3), "=S" (__ign4), "=D" (__ign5) \ - : "0" (__hentry), "1" ((long)(a1)), "2" ((long)(a2)), \ - "3" ((long)(a3)), "4" ((long)(a4)), \ - "5" ((long)(a5)) \ - : "memory" ); \ - (type)__res; \ -}) - -/****************************************************************************** - * - * The following interface definitions are taken from Xen and have the - * following license: - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to - * deal in the Software without restriction, including without limitation the - * rights to use, copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE - * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER - * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER - * DEALINGS IN THE SOFTWARE. - */ - -/* xen.h */ - -#define __HYPERVISOR_xen_version 17 - -/* version.h */ - -/* arg == xen_extraversion_t. */ -#define XENVER_extraversion 1 -typedef char xen_extraversion_t[16]; -#define XEN_EXTRAVERSION_LEN (sizeof(xen_extraversion_t)) - -#endif diff --git a/payloads/external/SeaBIOS/src/gen-defs.h b/payloads/external/SeaBIOS/src/gen-defs.h deleted file mode 100644 index dabf64cd..00000000 --- a/payloads/external/SeaBIOS/src/gen-defs.h +++ /dev/null @@ -1,19 +0,0 @@ -// Tool for building defintions accessible from assembler code. This -// is based on code from the Linux Kernel. -#ifndef __GEN_DEFS_H -#define __GEN_DEFS_H - - -#define DEFINE(sym, val) \ - asm volatile("\n->" #sym " %0 " #val : : "i" (val)) - -#define BLANK() \ - asm volatile("\n->" : : ) - -#define OFFSET(sym, str, mem) \ - DEFINE(sym, offsetof(struct str, mem)) - -#define COMMENT(x) \ - asm volatile("\n->#" x) - -#endif // gen-defs.h diff --git a/payloads/external/SeaBIOS/src/hw/ahci.c b/payloads/external/SeaBIOS/src/hw/ahci.c deleted file mode 100644 index d45b4307..00000000 --- a/payloads/external/SeaBIOS/src/hw/ahci.c +++ /dev/null @@ -1,699 +0,0 @@ -// Low level AHCI disk access -// -// Copyright (C) 2010 Gerd Hoffmann <kraxel@redhat.com> -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "ahci.h" // CDB_CMD_READ_10 -#include "ata.h" // ATA_CB_STAT -#include "biosvar.h" // GET_GLOBAL -#include "blockcmd.h" // CDB_CMD_READ_10 -#include "malloc.h" // free -#include "output.h" // dprintf -#include "pci.h" // pci_config_readb -#include "pcidevice.h" // foreachpci -#include "pci_ids.h" // PCI_CLASS_STORAGE_OTHER -#include "pci_regs.h" // PCI_INTERRUPT_LINE -#include "stacks.h" // yield -#include "std/disk.h" // DISK_RET_SUCCESS -#include "string.h" // memset -#include "util.h" // timer_calc -#include "x86.h" // inb - -#define AHCI_REQUEST_TIMEOUT 32000 // 32 seconds max for IDE ops -#define AHCI_RESET_TIMEOUT 500 // 500 miliseconds -#define AHCI_LINK_TIMEOUT 10 // 10 miliseconds - -// prepare sata command fis -static void sata_prep_simple(struct sata_cmd_fis *fis, u8 command) -{ - memset_fl(fis, 0, sizeof(*fis)); - fis->command = command; -} - -static void sata_prep_readwrite(struct sata_cmd_fis *fis, - struct disk_op_s *op, int iswrite) -{ - u64 lba = op->lba; - u8 command; - - memset_fl(fis, 0, sizeof(*fis)); - - if (op->count >= (1<<8) || lba + op->count >= (1<<28)) { - fis->sector_count2 = op->count >> 8; - fis->lba_low2 = lba >> 24; - fis->lba_mid2 = lba >> 32; - fis->lba_high2 = lba >> 40; - lba &= 0xffffff; - command = (iswrite ? ATA_CMD_WRITE_DMA_EXT - : ATA_CMD_READ_DMA_EXT); - } else { - command = (iswrite ? ATA_CMD_WRITE_DMA - : ATA_CMD_READ_DMA); - } - fis->feature = 1; /* dma */ - fis->command = command; - fis->sector_count = op->count; - fis->lba_low = lba; - fis->lba_mid = lba >> 8; - fis->lba_high = lba >> 16; - fis->device = ((lba >> 24) & 0xf) | ATA_CB_DH_LBA; -} - -static void sata_prep_atapi(struct sata_cmd_fis *fis, u16 blocksize) -{ - memset_fl(fis, 0, sizeof(*fis)); - fis->command = ATA_CMD_PACKET; - fis->feature = 1; /* dma */ - fis->lba_mid = blocksize; - fis->lba_high = blocksize >> 8; -} - -// ahci register access helpers -static u32 ahci_ctrl_readl(struct ahci_ctrl_s *ctrl, u32 reg) -{ - return readl(ctrl->iobase + reg); -} - -static void ahci_ctrl_writel(struct ahci_ctrl_s *ctrl, u32 reg, u32 val) -{ - writel(ctrl->iobase + reg, val); -} - -static u32 ahci_port_to_ctrl(u32 pnr, u32 port_reg) -{ - u32 ctrl_reg = 0x100; - ctrl_reg += pnr * 0x80; - ctrl_reg += port_reg; - return ctrl_reg; -} - -static u32 ahci_port_readl(struct ahci_ctrl_s *ctrl, u32 pnr, u32 reg) -{ - u32 ctrl_reg = ahci_port_to_ctrl(pnr, reg); - return ahci_ctrl_readl(ctrl, ctrl_reg); -} - -static void ahci_port_writel(struct ahci_ctrl_s *ctrl, u32 pnr, u32 reg, u32 val) -{ - u32 ctrl_reg = ahci_port_to_ctrl(pnr, reg); - ahci_ctrl_writel(ctrl, ctrl_reg, val); -} - -// submit ahci command + wait for result -static int ahci_command(struct ahci_port_s *port_gf, int iswrite, int isatapi, - void *buffer, u32 bsize) -{ - u32 val, status, success, flags, intbits, error; - struct ahci_ctrl_s *ctrl = port_gf->ctrl; - struct ahci_cmd_s *cmd = port_gf->cmd; - struct ahci_fis_s *fis = port_gf->fis; - struct ahci_list_s *list = port_gf->list; - u32 pnr = port_gf->pnr; - - cmd->fis.reg = 0x27; - cmd->fis.pmp_type = 1 << 7; /* cmd fis */ - cmd->prdt[0].base = (u32)buffer; - cmd->prdt[0].baseu = 0; - cmd->prdt[0].flags = bsize-1; - - flags = ((1 << 16) | /* one prd entry */ - (iswrite ? (1 << 6) : 0) | - (isatapi ? (1 << 5) : 0) | - (5 << 0)); /* fis length (dwords) */ - list[0].flags = flags; - list[0].bytes = 0; - list[0].base = (u32)(cmd); - list[0].baseu = 0; - - dprintf(8, "AHCI/%d: send cmd ...\n", pnr); - intbits = ahci_port_readl(ctrl, pnr, PORT_IRQ_STAT); - if (intbits) - ahci_port_writel(ctrl, pnr, PORT_IRQ_STAT, intbits); - ahci_port_writel(ctrl, pnr, PORT_CMD_ISSUE, 1); - - u32 end = timer_calc(AHCI_REQUEST_TIMEOUT); - do { - for (;;) { - intbits = ahci_port_readl(ctrl, pnr, PORT_IRQ_STAT); - if (intbits) { - ahci_port_writel(ctrl, pnr, PORT_IRQ_STAT, intbits); - if (intbits & 0x02) { - status = GET_LOWFLAT(fis->psfis[2]); - error = GET_LOWFLAT(fis->psfis[3]); - break; - } - if (intbits & 0x01) { - status = GET_LOWFLAT(fis->rfis[2]); - error = GET_LOWFLAT(fis->rfis[3]); - break; - } - } - if (timer_check(end)) { - warn_timeout(); - return -1; - } - yield(); - } - dprintf(8, "AHCI/%d: ... intbits 0x%x, status 0x%x ...\n", - pnr, intbits, status); - } while (status & ATA_CB_STAT_BSY); - - success = (0x00 == (status & (ATA_CB_STAT_BSY | ATA_CB_STAT_DF | - ATA_CB_STAT_ERR)) && - ATA_CB_STAT_RDY == (status & (ATA_CB_STAT_RDY))); - if (success) { - dprintf(8, "AHCI/%d: ... finished, status 0x%x, OK\n", pnr, - status); - } else { - dprintf(2, "AHCI/%d: ... finished, status 0x%x, ERROR 0x%x\n", pnr, - status, error); - - // non-queued error recovery (AHCI 1.3 section 6.2.2.1) - // Clears PxCMD.ST to 0 to reset the PxCI register - val = ahci_port_readl(ctrl, pnr, PORT_CMD); - ahci_port_writel(ctrl, pnr, PORT_CMD, val & ~PORT_CMD_START); - - // waits for PxCMD.CR to clear to 0 - while (1) { - val = ahci_port_readl(ctrl, pnr, PORT_CMD); - if ((val & PORT_CMD_LIST_ON) == 0) - break; - yield(); - } - - // Clears any error bits in PxSERR to enable capturing new errors - val = ahci_port_readl(ctrl, pnr, PORT_SCR_ERR); - ahci_port_writel(ctrl, pnr, PORT_SCR_ERR, val); - - // Clears status bits in PxIS as appropriate - val = ahci_port_readl(ctrl, pnr, PORT_IRQ_STAT); - ahci_port_writel(ctrl, pnr, PORT_IRQ_STAT, val); - - // If PxTFD.STS.BSY or PxTFD.STS.DRQ is set to 1, issue - // a COMRESET to the device to put it in an idle state - val = ahci_port_readl(ctrl, pnr, PORT_TFDATA); - if (val & (ATA_CB_STAT_BSY | ATA_CB_STAT_DRQ)) { - dprintf(2, "AHCI/%d: issue comreset\n", pnr); - val = ahci_port_readl(ctrl, pnr, PORT_SCR_CTL); - // set Device Detection Initialization (DET) to 1 for 1 ms for comreset - ahci_port_writel(ctrl, pnr, PORT_SCR_CTL, val | 1); - mdelay (1); - ahci_port_writel(ctrl, pnr, PORT_SCR_CTL, val); - } - - // Sets PxCMD.ST to 1 to enable issuing new commands - val = ahci_port_readl(ctrl, pnr, PORT_CMD); - ahci_port_writel(ctrl, pnr, PORT_CMD, val | PORT_CMD_START); - } - return success ? 0 : -1; -} - -#define CDROM_CDB_SIZE 12 - -int ahci_atapi_process_op(struct disk_op_s *op) -{ - if (! CONFIG_AHCI) - return 0; - - struct ahci_port_s *port_gf = container_of( - op->drive_fl, struct ahci_port_s, drive); - struct ahci_cmd_s *cmd = port_gf->cmd; - - if (op->command == CMD_WRITE || op->command == CMD_FORMAT) - return DISK_RET_EWRITEPROTECT; - int blocksize = scsi_fill_cmd(op, cmd->atapi, CDROM_CDB_SIZE); - if (blocksize < 0) - return default_process_op(op); - sata_prep_atapi(&cmd->fis, blocksize); - int rc = ahci_command(port_gf, 0, 1, op->buf_fl, op->count * blocksize); - if (rc < 0) - return DISK_RET_EBADTRACK; - return DISK_RET_SUCCESS; -} - -// read/write count blocks from a harddrive, op->buf_fl must be word aligned -static int -ahci_disk_readwrite_aligned(struct disk_op_s *op, int iswrite) -{ - struct ahci_port_s *port_gf = container_of( - op->drive_fl, struct ahci_port_s, drive); - struct ahci_cmd_s *cmd = port_gf->cmd; - int rc; - - sata_prep_readwrite(&cmd->fis, op, iswrite); - rc = ahci_command(port_gf, iswrite, 0, op->buf_fl, - op->count * DISK_SECTOR_SIZE); - dprintf(8, "ahci disk %s, lba %6x, count %3x, buf %p, rc %d\n", - iswrite ? "write" : "read", (u32)op->lba, op->count, op->buf_fl, rc); - if (rc < 0) - return DISK_RET_EBADTRACK; - return DISK_RET_SUCCESS; -} - -// read/write count blocks from a harddrive. -static int -ahci_disk_readwrite(struct disk_op_s *op, int iswrite) -{ - // if caller's buffer is word aligned, use it directly - if (((u32) op->buf_fl & 1) == 0) - return ahci_disk_readwrite_aligned(op, iswrite); - - // Use a word aligned buffer for AHCI I/O - int rc; - struct disk_op_s localop = *op; - u8 *alignedbuf_fl = bounce_buf_fl; - u8 *position = op->buf_fl; - - localop.buf_fl = alignedbuf_fl; - localop.count = 1; - - if (iswrite) { - u16 block; - for (block = 0; block < op->count; block++) { - memcpy_fl (alignedbuf_fl, position, DISK_SECTOR_SIZE); - rc = ahci_disk_readwrite_aligned (&localop, 1); - if (rc) - return rc; - position += DISK_SECTOR_SIZE; - localop.lba++; - } - } else { // read - u16 block; - for (block = 0; block < op->count; block++) { - rc = ahci_disk_readwrite_aligned (&localop, 0); - if (rc) - return rc; - memcpy_fl (position, alignedbuf_fl, DISK_SECTOR_SIZE); - position += DISK_SECTOR_SIZE; - localop.lba++; - } - } - return DISK_RET_SUCCESS; -} - -// command demuxer -int -ahci_process_op(struct disk_op_s *op) -{ - if (!CONFIG_AHCI) - return 0; - switch (op->command) { - case CMD_READ: - return ahci_disk_readwrite(op, 0); - case CMD_WRITE: - return ahci_disk_readwrite(op, 1); - default: - return default_process_op(op); - } -} - -static void -ahci_port_reset(struct ahci_ctrl_s *ctrl, u32 pnr) -{ - u32 val; - - /* disable FIS + CMD */ - u32 end = timer_calc(AHCI_RESET_TIMEOUT); - for (;;) { - val = ahci_port_readl(ctrl, pnr, PORT_CMD); - if (!(val & (PORT_CMD_FIS_RX | PORT_CMD_START | - PORT_CMD_FIS_ON | PORT_CMD_LIST_ON))) - break; - val &= ~(PORT_CMD_FIS_RX | PORT_CMD_START); - ahci_port_writel(ctrl, pnr, PORT_CMD, val); - if (timer_check(end)) { - warn_timeout(); - break; - } - yield(); - } - - /* disable + clear IRQs */ - ahci_port_writel(ctrl, pnr, PORT_IRQ_MASK, 0); - val = ahci_port_readl(ctrl, pnr, PORT_IRQ_STAT); - if (val) - ahci_port_writel(ctrl, pnr, PORT_IRQ_STAT, val); -} - -static struct ahci_port_s* -ahci_port_alloc(struct ahci_ctrl_s *ctrl, u32 pnr) -{ - struct ahci_port_s *port = malloc_tmp(sizeof(*port)); - - if (!port) { - warn_noalloc(); - return NULL; - } - memset(port, 0, sizeof(*port)); - port->pnr = pnr; - port->ctrl = ctrl; - port->list = memalign_tmp(1024, 1024); - port->fis = memalign_tmp(256, 256); - port->cmd = memalign_tmp(256, 256); - if (port->list == NULL || port->fis == NULL || port->cmd == NULL) { - warn_noalloc(); - return NULL; - } - memset(port->list, 0, 1024); - memset(port->fis, 0, 256); - memset(port->cmd, 0, 256); - - ahci_port_writel(ctrl, pnr, PORT_LST_ADDR, (u32)port->list); - ahci_port_writel(ctrl, pnr, PORT_FIS_ADDR, (u32)port->fis); - if (ctrl->caps & HOST_CAP_64) { - ahci_port_writel(ctrl, pnr, PORT_LST_ADDR_HI, 0); - ahci_port_writel(ctrl, pnr, PORT_FIS_ADDR_HI, 0); - } - - return port; -} - -static void ahci_port_release(struct ahci_port_s *port) -{ - ahci_port_reset(port->ctrl, port->pnr); - free(port->list); - free(port->fis); - free(port->cmd); - free(port); -} - -static struct ahci_port_s* ahci_port_realloc(struct ahci_port_s *port) -{ - struct ahci_port_s *tmp; - u32 cmd; - - tmp = malloc_fseg(sizeof(*port)); - if (!tmp) { - warn_noalloc(); - ahci_port_release(port); - return NULL; - } - *tmp = *port; - free(port); - port = tmp; - - ahci_port_reset(port->ctrl, port->pnr); - - free(port->list); - free(port->fis); - free(port->cmd); - port->list = memalign_high(1024, 1024); - port->fis = memalign_high(256, 256); - port->cmd = memalign_high(256, 256); - if (!port->list || !port->fis || !port->cmd) { - warn_noalloc(); - free(port->list); - free(port->fis); - free(port->cmd); - free(port); - return NULL; - } - - ahci_port_writel(port->ctrl, port->pnr, PORT_LST_ADDR, (u32)port->list); - ahci_port_writel(port->ctrl, port->pnr, PORT_FIS_ADDR, (u32)port->fis); - - cmd = ahci_port_readl(port->ctrl, port->pnr, PORT_CMD); - cmd |= (PORT_CMD_FIS_RX|PORT_CMD_START); - ahci_port_writel(port->ctrl, port->pnr, PORT_CMD, cmd); - - return port; -} - -#define MAXMODEL 40 - -/* See ahci spec chapter 10.1 "Software Initialization of HBA" */ -static int ahci_port_setup(struct ahci_port_s *port) -{ - struct ahci_ctrl_s *ctrl = port->ctrl; - u32 pnr = port->pnr; - char model[MAXMODEL+1]; - u16 buffer[256]; - u32 cmd, stat, err, tf; - int rc; - - /* enable FIS recv */ - cmd = ahci_port_readl(ctrl, pnr, PORT_CMD); - cmd |= PORT_CMD_FIS_RX; - ahci_port_writel(ctrl, pnr, PORT_CMD, cmd); - - /* spin up */ - cmd |= PORT_CMD_SPIN_UP; - ahci_port_writel(ctrl, pnr, PORT_CMD, cmd); - u32 end = timer_calc(AHCI_LINK_TIMEOUT); - for (;;) { - stat = ahci_port_readl(ctrl, pnr, PORT_SCR_STAT); - if ((stat & 0x07) == 0x03) { - dprintf(2, "AHCI/%d: link up\n", port->pnr); - break; - } - if (timer_check(end)) { - dprintf(2, "AHCI/%d: link down\n", port->pnr); - return -1; - } - yield(); - } - - /* clear error status */ - err = ahci_port_readl(ctrl, pnr, PORT_SCR_ERR); - if (err) - ahci_port_writel(ctrl, pnr, PORT_SCR_ERR, err); - - /* wait for device becoming ready */ - end = timer_calc(AHCI_REQUEST_TIMEOUT); - for (;;) { - tf = ahci_port_readl(ctrl, pnr, PORT_TFDATA); - if (!(tf & (ATA_CB_STAT_BSY | - ATA_CB_STAT_DRQ))) - break; - if (timer_check(end)) { - warn_timeout(); - dprintf(1, "AHCI/%d: device not ready (tf 0x%x)\n", port->pnr, tf); - return -1; - } - yield(); - } - - /* start device */ - cmd |= PORT_CMD_START; - ahci_port_writel(ctrl, pnr, PORT_CMD, cmd); - - sata_prep_simple(&port->cmd->fis, ATA_CMD_IDENTIFY_PACKET_DEVICE); - rc = ahci_command(port, 0, 0, buffer, sizeof(buffer)); - if (rc == 0) { - port->atapi = 1; - } else { - port->atapi = 0; - sata_prep_simple(&port->cmd->fis, ATA_CMD_IDENTIFY_DEVICE); - rc = ahci_command(port, 0, 0, buffer, sizeof(buffer)); - if (rc < 0) - return -1; - } - - port->drive.cntl_id = pnr; - port->drive.removable = (buffer[0] & 0x80) ? 1 : 0; - - if (!port->atapi) { - // found disk (ata) - port->drive.type = DTYPE_AHCI; - port->drive.blksize = DISK_SECTOR_SIZE; - port->drive.pchs.cylinder = buffer[1]; - port->drive.pchs.head = buffer[3]; - port->drive.pchs.sector = buffer[6]; - - u64 sectors; - if (buffer[83] & (1 << 10)) // word 83 - lba48 support - sectors = *(u64*)&buffer[100]; // word 100-103 - else - sectors = *(u32*)&buffer[60]; // word 60 and word 61 - port->drive.sectors = sectors; - u64 adjsize = sectors >> 11; - char adjprefix = 'M'; - if (adjsize >= (1 << 16)) { - adjsize >>= 10; - adjprefix = 'G'; - } - port->desc = znprintf(MAXDESCSIZE - , "AHCI/%d: %s ATA-%d Hard-Disk (%u %ciBytes)" - , port->pnr - , ata_extract_model(model, MAXMODEL, buffer) - , ata_extract_version(buffer) - , (u32)adjsize, adjprefix); - port->prio = bootprio_find_ata_device(ctrl->pci_tmp, pnr, 0); - - s8 multi_dma = -1; - s8 pio_mode = -1; - s8 udma_mode = -1; - // If bit 2 in word 53 is set, udma information is valid in word 88. - if (buffer[53] & 0x04) { - udma_mode = 6; - while ((udma_mode >= 0) && - !((buffer[88] & 0x7f) & ( 1 << udma_mode ))) { - udma_mode--; - } - } - // If bit 1 in word 53 is set, multiword-dma and advanced pio modes - // are available in words 63 and 64. - if (buffer[53] & 0x02) { - pio_mode = 4; - multi_dma = 3; - while ((multi_dma >= 0) && - !((buffer[63] & 0x7) & ( 1 << multi_dma ))) { - multi_dma--; - } - while ((pio_mode >= 3) && - !((buffer[64] & 0x3) & ( 1 << ( pio_mode - 3 ) ))) { - pio_mode--; - } - } - dprintf(2, "AHCI/%d: supported modes: udma %d, multi-dma %d, pio %d\n", - port->pnr, udma_mode, multi_dma, pio_mode); - - sata_prep_simple(&port->cmd->fis, ATA_CMD_SET_FEATURES); - port->cmd->fis.feature = ATA_SET_FEATRUE_TRANSFER_MODE; - // Select used mode. UDMA first, then Multi-DMA followed by - // advanced PIO modes 3 or 4. If non, set default PIO. - if (udma_mode >= 0) { - dprintf(1, "AHCI/%d: Set transfer mode to UDMA-%d\n", - port->pnr, udma_mode); - port->cmd->fis.sector_count = ATA_TRANSFER_MODE_ULTRA_DMA - | udma_mode; - } else if (multi_dma >= 0) { - dprintf(1, "AHCI/%d: Set transfer mode to Multi-DMA-%d\n", - port->pnr, multi_dma); - port->cmd->fis.sector_count = ATA_TRANSFER_MODE_MULTIWORD_DMA - | multi_dma; - } else if (pio_mode >= 3) { - dprintf(1, "AHCI/%d: Set transfer mode to PIO-%d\n", - port->pnr, pio_mode); - port->cmd->fis.sector_count = ATA_TRANSFER_MODE_PIO_FLOW_CTRL - | pio_mode; - } else { - dprintf(1, "AHCI/%d: Set transfer mode to default PIO\n", - port->pnr); - port->cmd->fis.sector_count = ATA_TRANSFER_MODE_DEFAULT_PIO; - } - rc = ahci_command(port, 1, 0, 0, 0); - if (rc < 0) { - dprintf(1, "AHCI/%d: Set transfer mode failed.\n", port->pnr); - } - } else { - // found cdrom (atapi) - port->drive.type = DTYPE_AHCI_ATAPI; - port->drive.blksize = CDROM_SECTOR_SIZE; - port->drive.sectors = (u64)-1; - u8 iscd = ((buffer[0] >> 8) & 0x1f) == 0x05; - if (!iscd) { - dprintf(1, "AHCI/%d: atapi device isn't a cdrom\n", port->pnr); - return -1; - } - port->desc = znprintf(MAXDESCSIZE - , "DVD/CD [AHCI/%d: %s ATAPI-%d DVD/CD]" - , port->pnr - , ata_extract_model(model, MAXMODEL, buffer) - , ata_extract_version(buffer)); - port->prio = bootprio_find_ata_device(ctrl->pci_tmp, pnr, 0); - } - boot_lchs_find_ata_device(ctrl->pci_tmp, pnr, 0, &(port->drive.lchs)); - return 0; -} - -// Detect any drives attached to a given controller. -static void -ahci_port_detect(void *data) -{ - struct ahci_port_s *port = data; - int rc; - - dprintf(2, "AHCI/%d: probing\n", port->pnr); - ahci_port_reset(port->ctrl, port->pnr); - rc = ahci_port_setup(port); - if (rc < 0) - ahci_port_release(port); - else { - port = ahci_port_realloc(port); - if (port == NULL) - return; - dprintf(1, "AHCI/%d: registering: \"%s\"\n", port->pnr, port->desc); - if (!port->atapi) { - // Register with bcv system. - boot_add_hd(&port->drive, port->desc, port->prio); - } else { - // fill cdidmap - boot_add_cd(&port->drive, port->desc, port->prio); - } - } -} - -// Initialize an ata controller and detect its drives. -static void -ahci_controller_setup(struct pci_device *pci) -{ - struct ahci_port_s *port; - u32 val, pnr, max; - - if (create_bounce_buf() < 0) - return; - - void *iobase = pci_enable_membar(pci, PCI_BASE_ADDRESS_5); - if (!iobase) - return; - - struct ahci_ctrl_s *ctrl = malloc_fseg(sizeof(*ctrl)); - if (!ctrl) { - warn_noalloc(); - return; - } - - ctrl->pci_tmp = pci; - ctrl->iobase = iobase; - ctrl->irq = pci_config_readb(pci->bdf, PCI_INTERRUPT_LINE); - dprintf(1, "AHCI controller at %pP, iobase %p, irq %d\n" - , pci, ctrl->iobase, ctrl->irq); - - pci_enable_busmaster(pci); - - val = ahci_ctrl_readl(ctrl, HOST_CTL); - ahci_ctrl_writel(ctrl, HOST_CTL, val | HOST_CTL_AHCI_EN); - - ctrl->caps = ahci_ctrl_readl(ctrl, HOST_CAP); - ctrl->ports = ahci_ctrl_readl(ctrl, HOST_PORTS_IMPL); - dprintf(2, "AHCI: cap 0x%x, ports_impl 0x%x\n", - ctrl->caps, ctrl->ports); - - max = 0x1f; - for (pnr = 0; pnr <= max; pnr++) { - if (!(ctrl->ports & (1 << pnr))) - continue; - port = ahci_port_alloc(ctrl, pnr); - if (port == NULL) - continue; - run_thread(ahci_port_detect, port); - } -} - -// Locate and init ahci controllers. -static void -ahci_scan(void) -{ - // Scan PCI bus for ATA adapters - struct pci_device *pci; - foreachpci(pci) { - if (pci->class != PCI_CLASS_STORAGE_SATA) - continue; - if (pci->prog_if != 1 /* AHCI rev 1 */) - continue; - ahci_controller_setup(pci); - } -} - -void -ahci_setup(void) -{ - ASSERT32FLAT(); - if (!CONFIG_AHCI) - return; - - dprintf(3, "init ahci\n"); - ahci_scan(); -} diff --git a/payloads/external/SeaBIOS/src/hw/ahci.h b/payloads/external/SeaBIOS/src/hw/ahci.h deleted file mode 100644 index 5c4f6e18..00000000 --- a/payloads/external/SeaBIOS/src/hw/ahci.h +++ /dev/null @@ -1,201 +0,0 @@ -#ifndef __AHCI_H -#define __AHCI_H - -#include "block.h" // struct drive_s -#include "types.h" // u32 - -struct sata_cmd_fis { - u8 reg; - u8 pmp_type; - u8 command; - u8 feature; - - u8 lba_low; - u8 lba_mid; - u8 lba_high; - u8 device; - - u8 lba_low2; - u8 lba_mid2; - u8 lba_high2; - u8 feature2; - - u8 sector_count; - u8 sector_count2; - u8 res_1; - u8 control; - - u8 res_2[64 - 16]; -}; - -struct ahci_ctrl_s { - struct pci_device *pci_tmp; - u8 irq; - void *iobase; - u32 caps; - u32 ports; -}; - -struct ahci_cmd_s { - struct sata_cmd_fis fis; - u8 atapi[0x20]; - u8 res[0x20]; - struct { - u32 base; - u32 baseu; - u32 res; - u32 flags; - } prdt[]; -}; - -/* command list */ -struct ahci_list_s { - u32 flags; - u32 bytes; - u32 base; - u32 baseu; - u32 res[4]; -}; - -struct ahci_fis_s { - u8 dsfis[0x1c]; /* dma setup */ - u8 res_1[0x04]; - u8 psfis[0x14]; /* pio setup */ - u8 res_2[0x0c]; - u8 rfis[0x14]; /* d2h register */ - u8 res_3[0x04]; - u8 sdbfis[0x08]; /* set device bits */ - u8 ufis[0x40]; /* unknown */ - u8 res_4[0x60]; -}; - -struct ahci_port_s { - struct drive_s drive; - struct ahci_ctrl_s *ctrl; - struct ahci_list_s *list; - struct ahci_fis_s *fis; - struct ahci_cmd_s *cmd; - u32 pnr; - u32 atapi; - char *desc; - int prio; -}; - -void ahci_setup(void); -int ahci_process_op(struct disk_op_s *op); -int ahci_atapi_process_op(struct disk_op_s *op); - -#define AHCI_IRQ_ON_SG (1 << 31) -#define AHCI_CMD_ATAPI (1 << 5) -#define AHCI_CMD_WRITE (1 << 6) -#define AHCI_CMD_PREFETCH (1 << 7) -#define AHCI_CMD_RESET (1 << 8) -#define AHCI_CMD_CLR_BUSY (1 << 10) - -#define RX_FIS_D2H_REG 0x40 /* offset of D2H Register FIS data */ -#define RX_FIS_SDB 0x58 /* offset of SDB FIS data */ -#define RX_FIS_UNK 0x60 /* offset of Unknown FIS data */ - -/* global controller registers */ -#define HOST_CAP 0x00 /* host capabilities */ -#define HOST_CTL 0x04 /* global host control */ -#define HOST_IRQ_STAT 0x08 /* interrupt status */ -#define HOST_PORTS_IMPL 0x0c /* bitmap of implemented ports */ -#define HOST_VERSION 0x10 /* AHCI spec. version compliancy */ - -/* HOST_CTL bits */ -#define HOST_CTL_RESET (1 << 0) /* reset controller; self-clear */ -#define HOST_CTL_IRQ_EN (1 << 1) /* global IRQ enable */ -#define HOST_CTL_AHCI_EN (1 << 31) /* AHCI enabled */ - -/* HOST_CAP bits */ -#define HOST_CAP_SSC (1 << 14) /* Slumber capable */ -#define HOST_CAP_AHCI (1 << 18) /* AHCI only */ -#define HOST_CAP_CLO (1 << 24) /* Command List Override support */ -#define HOST_CAP_SSS (1 << 27) /* Staggered Spin-up */ -#define HOST_CAP_NCQ (1 << 30) /* Native Command Queueing */ -#define HOST_CAP_64 (1 << 31) /* PCI DAC (64-bit DMA) support */ - -/* registers for each SATA port */ -#define PORT_LST_ADDR 0x00 /* command list DMA addr */ -#define PORT_LST_ADDR_HI 0x04 /* command list DMA addr hi */ -#define PORT_FIS_ADDR 0x08 /* FIS rx buf addr */ -#define PORT_FIS_ADDR_HI 0x0c /* FIS rx buf addr hi */ -#define PORT_IRQ_STAT 0x10 /* interrupt status */ -#define PORT_IRQ_MASK 0x14 /* interrupt enable/disable mask */ -#define PORT_CMD 0x18 /* port command */ -#define PORT_TFDATA 0x20 /* taskfile data */ -#define PORT_SIG 0x24 /* device TF signature */ -#define PORT_SCR_STAT 0x28 /* SATA phy register: SStatus */ -#define PORT_SCR_CTL 0x2c /* SATA phy register: SControl */ -#define PORT_SCR_ERR 0x30 /* SATA phy register: SError */ -#define PORT_SCR_ACT 0x34 /* SATA phy register: SActive */ -#define PORT_CMD_ISSUE 0x38 /* command issue */ -#define PORT_RESERVED 0x3c /* reserved */ - -/* PORT_IRQ_{STAT,MASK} bits */ -#define PORT_IRQ_COLD_PRES (1 << 31) /* cold presence detect */ -#define PORT_IRQ_TF_ERR (1 << 30) /* task file error */ -#define PORT_IRQ_HBUS_ERR (1 << 29) /* host bus fatal error */ -#define PORT_IRQ_HBUS_DATA_ERR (1 << 28) /* host bus data error */ -#define PORT_IRQ_IF_ERR (1 << 27) /* interface fatal error */ -#define PORT_IRQ_IF_NONFATAL (1 << 26) /* interface non-fatal error */ -#define PORT_IRQ_OVERFLOW (1 << 24) /* xfer exhausted available S/G */ -#define PORT_IRQ_BAD_PMP (1 << 23) /* incorrect port multiplier */ - -#define PORT_IRQ_PHYRDY (1 << 22) /* PhyRdy changed */ -#define PORT_IRQ_DEV_ILCK (1 << 7) /* device interlock */ -#define PORT_IRQ_CONNECT (1 << 6) /* port connect change status */ -#define PORT_IRQ_SG_DONE (1 << 5) /* descriptor processed */ -#define PORT_IRQ_UNK_FIS (1 << 4) /* unknown FIS rx'd */ -#define PORT_IRQ_SDB_FIS (1 << 3) /* Set Device Bits FIS rx'd */ -#define PORT_IRQ_DMAS_FIS (1 << 2) /* DMA Setup FIS rx'd */ -#define PORT_IRQ_PIOS_FIS (1 << 1) /* PIO Setup FIS rx'd */ -#define PORT_IRQ_D2H_REG_FIS (1 << 0) /* D2H Register FIS rx'd */ - -#define PORT_IRQ_FREEZE (PORT_IRQ_HBUS_ERR | PORT_IRQ_IF_ERR | \ - PORT_IRQ_CONNECT | PORT_IRQ_PHYRDY | \ - PORT_IRQ_UNK_FIS) -#define PORT_IRQ_ERROR (PORT_IRQ_FREEZE | PORT_IRQ_TF_ERR | \ - PORT_IRQ_HBUS_DATA_ERR) -#define DEF_PORT_IRQ (PORT_IRQ_ERROR | PORT_IRQ_SG_DONE | \ - PORT_IRQ_SDB_FIS | PORT_IRQ_DMAS_FIS | \ - PORT_IRQ_PIOS_FIS | PORT_IRQ_D2H_REG_FIS) - -/* PORT_CMD bits */ -#define PORT_CMD_ATAPI (1 << 24) /* Device is ATAPI */ -#define PORT_CMD_LIST_ON (1 << 15) /* cmd list DMA engine running */ -#define PORT_CMD_FIS_ON (1 << 14) /* FIS DMA engine running */ -#define PORT_CMD_FIS_RX (1 << 4) /* Enable FIS receive DMA engine */ -#define PORT_CMD_CLO (1 << 3) /* Command list override */ -#define PORT_CMD_POWER_ON (1 << 2) /* Power up device */ -#define PORT_CMD_SPIN_UP (1 << 1) /* Spin up device */ -#define PORT_CMD_START (1 << 0) /* Enable port DMA engine */ - -#define PORT_CMD_ICC_MASK (0xf << 28) /* i/f ICC state mask */ -#define PORT_CMD_ICC_ACTIVE (0x1 << 28) /* Put i/f in active state */ -#define PORT_CMD_ICC_PARTIAL (0x2 << 28) /* Put i/f in partial state */ -#define PORT_CMD_ICC_SLUMBER (0x6 << 28) /* Put i/f in slumber state */ - -#define PORT_IRQ_STAT_DHRS (1 << 0) /* Device to Host Register FIS */ -#define PORT_IRQ_STAT_PSS (1 << 1) /* PIO Setup FIS */ -#define PORT_IRQ_STAT_DSS (1 << 2) /* DMA Setup FIS */ -#define PORT_IRQ_STAT_SDBS (1 << 3) /* Set Device Bits */ -#define PORT_IRQ_STAT_UFS (1 << 4) /* Unknown FIS */ -#define PORT_IRQ_STAT_DPS (1 << 5) /* Descriptor Processed */ -#define PORT_IRQ_STAT_PCS (1 << 6) /* Port Connect Change Status */ -#define PORT_IRQ_STAT_DMPS (1 << 7) /* Device Mechanical Presence - Status */ -#define PORT_IRQ_STAT_PRCS (1 << 22) /* File Ready Status */ -#define PORT_IRQ_STAT_IPMS (1 << 23) /* Incorrect Port Multiplier - Status */ -#define PORT_IRQ_STAT_OFS (1 << 24) /* Overflow Status */ -#define PORT_IRQ_STAT_INFS (1 << 26) /* Interface Non-Fatal Error - Status */ -#define PORT_IRQ_STAT_IFS (1 << 27) /* Interface Fatal Error */ -#define PORT_IRQ_STAT_HBDS (1 << 28) /* Host Bus Data Error Status */ -#define PORT_IRQ_STAT_HBFS (1 << 29) /* Host Bus Fatal Error Status */ -#define PORT_IRQ_STAT_TFES (1 << 30) /* Task File Error Status */ -#define PORT_IRQ_STAT_CPDS (1 << 31) /* Code Port Detect Status */ - -#endif // ahci.h diff --git a/payloads/external/SeaBIOS/src/hw/ata.c b/payloads/external/SeaBIOS/src/hw/ata.c deleted file mode 100644 index f788ce71..00000000 --- a/payloads/external/SeaBIOS/src/hw/ata.c +++ /dev/null @@ -1,1054 +0,0 @@ -// Low level ATA disk access -// -// Copyright (C) 2008,2009 Kevin O'Connor <kevin@koconnor.net> -// Copyright (C) 2002 MandrakeSoft S.A. -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "ata.h" // ATA_CB_STAT -#include "biosvar.h" // GET_GLOBALFLAT -#include "block.h" // struct drive_s -#include "blockcmd.h" // CDB_CMD_READ_10 -#include "byteorder.h" // be16_to_cpu -#include "malloc.h" // malloc_fseg -#include "output.h" // dprintf -#include "pci.h" // pci_config_readb -#include "pcidevice.h" // foreachpci -#include "pci_ids.h" // PCI_CLASS_STORAGE_OTHER -#include "pci_regs.h" // PCI_INTERRUPT_LINE -#include "pic.h" // enable_hwirq -#include "stacks.h" // yield -#include "std/disk.h" // DISK_RET_SUCCESS -#include "string.h" // memset -#include "util.h" // timer_calc -#include "x86.h" // inb - -#define IDE_TIMEOUT 32000 //32 seconds max for IDE ops - - -/**************************************************************** - * Helper functions - ****************************************************************/ - -// Wait for the specified ide state -static inline int -await_ide(u8 mask, u8 flags, u16 base, u16 timeout) -{ - u32 end = timer_calc(timeout); - for (;;) { - u8 status = inb(base+ATA_CB_STAT); - if ((status & mask) == flags) - return status; - if (timer_check(end)) { - warn_timeout(); - return -1; - } - yield(); - } -} - -// Wait for the device to be not-busy. -static int -await_not_bsy(u16 base) -{ - return await_ide(ATA_CB_STAT_BSY, 0, base, IDE_TIMEOUT); -} - -// Wait for the device to be ready. -static int -await_rdy(u16 base) -{ - return await_ide(ATA_CB_STAT_RDY, ATA_CB_STAT_RDY, base, IDE_TIMEOUT); -} - -// Wait for ide state - pauses for one ata cycle first. -static inline int -pause_await_not_bsy(u16 iobase1, u16 iobase2) -{ - // Wait one PIO transfer cycle. - inb(iobase2 + ATA_CB_ASTAT); - - return await_not_bsy(iobase1); -} - -// Wait for ide state - pause for 400ns first. -static inline int -ndelay_await_not_bsy(u16 iobase1) -{ - ndelay(400); - return await_not_bsy(iobase1); -} - -// Reset a drive -static void -ata_reset(struct atadrive_s *adrive_gf) -{ - struct ata_channel_s *chan_gf = GET_GLOBALFLAT(adrive_gf->chan_gf); - u8 slave = GET_GLOBALFLAT(adrive_gf->slave); - u16 iobase1 = GET_GLOBALFLAT(chan_gf->iobase1); - u16 iobase2 = GET_GLOBALFLAT(chan_gf->iobase2); - - dprintf(6, "ata_reset drive=%p\n", &adrive_gf->drive); - // Pulse SRST - outb(ATA_CB_DC_HD15 | ATA_CB_DC_NIEN | ATA_CB_DC_SRST, iobase2+ATA_CB_DC); - udelay(5); - outb(ATA_CB_DC_HD15 | ATA_CB_DC_NIEN, iobase2+ATA_CB_DC); - msleep(2); - - // wait for device to become not busy. - int status = await_not_bsy(iobase1); - if (status < 0) - goto done; - if (slave) { - // Change device. - u32 end = timer_calc(IDE_TIMEOUT); - for (;;) { - outb(ATA_CB_DH_DEV1, iobase1 + ATA_CB_DH); - status = ndelay_await_not_bsy(iobase1); - if (status < 0) - goto done; - if (inb(iobase1 + ATA_CB_DH) == ATA_CB_DH_DEV1) - break; - // Change drive request failed to take effect - retry. - if (timer_check(end)) { - warn_timeout(); - goto done; - } - } - } else { - // QEMU doesn't reset dh on reset, so set it explicitly. - outb(ATA_CB_DH_DEV0, iobase1 + ATA_CB_DH); - } - - // On a user-reset request, wait for RDY if it is an ATA device. - u8 type=GET_GLOBALFLAT(adrive_gf->drive.type); - if (type == DTYPE_ATA) - status = await_rdy(iobase1); - -done: - // Enable interrupts - outb(ATA_CB_DC_HD15, iobase2+ATA_CB_DC); - - dprintf(6, "ata_reset exit status=%x\n", status); -} - -// Check for drive RDY for 16bit interface command. -static int -isready(struct atadrive_s *adrive_gf) -{ - // Read the status from controller - struct ata_channel_s *chan_gf = GET_GLOBALFLAT(adrive_gf->chan_gf); - u16 iobase1 = GET_GLOBALFLAT(chan_gf->iobase1); - u8 status = inb(iobase1 + ATA_CB_STAT); - if ((status & (ATA_CB_STAT_BSY|ATA_CB_STAT_RDY)) == ATA_CB_STAT_RDY) - return DISK_RET_SUCCESS; - return DISK_RET_ENOTREADY; -} - - -/**************************************************************** - * ATA send command - ****************************************************************/ - -struct ata_pio_command { - u8 feature; - u8 sector_count; - u8 lba_low; - u8 lba_mid; - u8 lba_high; - u8 device; - u8 command; - - u8 feature2; - u8 sector_count2; - u8 lba_low2; - u8 lba_mid2; - u8 lba_high2; -}; - -// Send an ata command to the drive. -static int -send_cmd(struct atadrive_s *adrive_gf, struct ata_pio_command *cmd) -{ - struct ata_channel_s *chan_gf = GET_GLOBALFLAT(adrive_gf->chan_gf); - u8 slave = GET_GLOBALFLAT(adrive_gf->slave); - u16 iobase1 = GET_GLOBALFLAT(chan_gf->iobase1); - - // Select device - int status = await_not_bsy(iobase1); - if (status < 0) - return status; - u8 newdh = ((cmd->device & ~ATA_CB_DH_DEV1) - | (slave ? ATA_CB_DH_DEV1 : ATA_CB_DH_DEV0)); - u8 olddh = inb(iobase1 + ATA_CB_DH); - outb(newdh, iobase1 + ATA_CB_DH); - if ((olddh ^ newdh) & (1<<4)) { - // Was a device change - wait for device to become not busy. - status = ndelay_await_not_bsy(iobase1); - if (status < 0) - return status; - } - - // Check for ATA_CMD_(READ|WRITE)_(SECTORS|DMA)_EXT commands. - if ((cmd->command & ~0x11) == ATA_CMD_READ_SECTORS_EXT) { - outb(cmd->feature2, iobase1 + ATA_CB_FR); - outb(cmd->sector_count2, iobase1 + ATA_CB_SC); - outb(cmd->lba_low2, iobase1 + ATA_CB_SN); - outb(cmd->lba_mid2, iobase1 + ATA_CB_CL); - outb(cmd->lba_high2, iobase1 + ATA_CB_CH); - } - outb(cmd->feature, iobase1 + ATA_CB_FR); - outb(cmd->sector_count, iobase1 + ATA_CB_SC); - outb(cmd->lba_low, iobase1 + ATA_CB_SN); - outb(cmd->lba_mid, iobase1 + ATA_CB_CL); - outb(cmd->lba_high, iobase1 + ATA_CB_CH); - outb(cmd->command, iobase1 + ATA_CB_CMD); - - return 0; -} - -// Wait for data after calling 'send_cmd'. -static int -ata_wait_data(u16 iobase1) -{ - int status = ndelay_await_not_bsy(iobase1); - if (status < 0) - return status; - - if (status & ATA_CB_STAT_ERR) { - dprintf(6, "send_cmd : read error (status=%02x err=%02x)\n" - , status, inb(iobase1 + ATA_CB_ERR)); - return -4; - } - if (!(status & ATA_CB_STAT_DRQ)) { - dprintf(6, "send_cmd : DRQ not set (status %02x)\n", status); - return -5; - } - - return 0; -} - -// Send an ata command that does not transfer any further data. -int -ata_cmd_nondata(struct atadrive_s *adrive_gf, struct ata_pio_command *cmd) -{ - struct ata_channel_s *chan_gf = GET_GLOBALFLAT(adrive_gf->chan_gf); - u16 iobase1 = GET_GLOBALFLAT(chan_gf->iobase1); - u16 iobase2 = GET_GLOBALFLAT(chan_gf->iobase2); - - // Disable interrupts - outb(ATA_CB_DC_HD15 | ATA_CB_DC_NIEN, iobase2 + ATA_CB_DC); - - int ret = send_cmd(adrive_gf, cmd); - if (ret) - goto fail; - ret = ndelay_await_not_bsy(iobase1); - if (ret < 0) - goto fail; - - if (ret & ATA_CB_STAT_ERR) { - dprintf(6, "nondata cmd : read error (status=%02x err=%02x)\n" - , ret, inb(iobase1 + ATA_CB_ERR)); - ret = -4; - goto fail; - } - if (ret & ATA_CB_STAT_DRQ) { - dprintf(6, "nondata cmd : DRQ set (status %02x)\n", ret); - ret = -5; - goto fail; - } - -fail: - // Enable interrupts - outb(ATA_CB_DC_HD15, iobase2+ATA_CB_DC); - - return ret; -} - - -/**************************************************************** - * ATA PIO transfers - ****************************************************************/ - -// Transfer 'op->count' blocks (of 'blocksize' bytes) to/from drive -// 'op->drive_fl'. -static int -ata_pio_transfer(struct disk_op_s *op, int iswrite, int blocksize) -{ - dprintf(16, "ata_pio_transfer id=%p write=%d count=%d bs=%d buf=%p\n" - , op->drive_fl, iswrite, op->count, blocksize, op->buf_fl); - - struct atadrive_s *adrive_gf = container_of( - op->drive_fl, struct atadrive_s, drive); - struct ata_channel_s *chan_gf = GET_GLOBALFLAT(adrive_gf->chan_gf); - u16 iobase1 = GET_GLOBALFLAT(chan_gf->iobase1); - u16 iobase2 = GET_GLOBALFLAT(chan_gf->iobase2); - int count = op->count; - void *buf_fl = op->buf_fl; - int status; - for (;;) { - if (iswrite) { - // Write data to controller - dprintf(16, "Write sector id=%p dest=%p\n", op->drive_fl, buf_fl); - if (CONFIG_ATA_PIO32) - outsl_fl(iobase1, buf_fl, blocksize / 4); - else - outsw_fl(iobase1, buf_fl, blocksize / 2); - } else { - // Read data from controller - dprintf(16, "Read sector id=%p dest=%p\n", op->drive_fl, buf_fl); - if (CONFIG_ATA_PIO32) - insl_fl(iobase1, buf_fl, blocksize / 4); - else - insw_fl(iobase1, buf_fl, blocksize / 2); - } - buf_fl += blocksize; - - status = pause_await_not_bsy(iobase1, iobase2); - if (status < 0) { - // Error - op->count -= count; - return status; - } - - count--; - if (!count) - break; - status &= (ATA_CB_STAT_BSY | ATA_CB_STAT_DRQ | ATA_CB_STAT_ERR); - if (status != ATA_CB_STAT_DRQ) { - dprintf(6, "ata_pio_transfer : more sectors left (status %02x)\n" - , status); - op->count -= count; - return -6; - } - } - - status &= (ATA_CB_STAT_BSY | ATA_CB_STAT_DF | ATA_CB_STAT_DRQ - | ATA_CB_STAT_ERR); - if (!iswrite) - status &= ~ATA_CB_STAT_DF; - if (status != 0) { - dprintf(6, "ata_pio_transfer : no sectors left (status %02x)\n", status); - return -7; - } - - return 0; -} - - -/**************************************************************** - * ATA DMA transfers - ****************************************************************/ - -#define BM_CMD 0 -#define BM_CMD_MEMWRITE 0x08 -#define BM_CMD_START 0x01 -#define BM_STATUS 2 -#define BM_STATUS_IRQ 0x04 -#define BM_STATUS_ERROR 0x02 -#define BM_STATUS_ACTIVE 0x01 -#define BM_TABLE 4 - -struct sff_dma_prd { - u32 buf_fl; - u32 count; -}; - -// Check if DMA available and setup transfer if so. -static int -ata_try_dma(struct disk_op_s *op, int iswrite, int blocksize) -{ - ASSERT16(); - if (! CONFIG_ATA_DMA) - return -1; - u32 dest = (u32)op->buf_fl; - if (dest & 1) - // Need minimum alignment of 1. - return -1; - struct atadrive_s *adrive_gf = container_of( - op->drive_fl, struct atadrive_s, drive); - struct ata_channel_s *chan_gf = GET_GLOBALFLAT(adrive_gf->chan_gf); - u16 iomaster = GET_GLOBALFLAT(chan_gf->iomaster); - if (! iomaster) - return -1; - u32 bytes = op->count * blocksize; - if (! bytes) - return -1; - - // Build PRD dma structure. - struct sff_dma_prd *dma = MAKE_FLATPTR(SEG_LOW, ExtraStack); - struct sff_dma_prd *origdma = dma; - while (bytes) { - if (dma >= &origdma[16]) - // Too many descriptors.. - return -1; - u32 count = bytes; - u32 max = 0x10000 - (dest & 0xffff); - if (count > max) - count = max; - - SET_LOWFLAT(dma->buf_fl, dest); - bytes -= count; - if (!bytes) - // Last descriptor. - count |= 1<<31; - dprintf(16, "dma@%p: %08x %08x\n", dma, dest, count); - dest += count; - SET_LOWFLAT(dma->count, count); - dma++; - } - - // Program bus-master controller. - outl((u32)origdma, iomaster + BM_TABLE); - u8 oldcmd = inb(iomaster + BM_CMD) & ~(BM_CMD_MEMWRITE|BM_CMD_START); - outb(oldcmd | (iswrite ? 0x00 : BM_CMD_MEMWRITE), iomaster + BM_CMD); - outb(BM_STATUS_ERROR|BM_STATUS_IRQ, iomaster + BM_STATUS); - - return 0; -} - -// Transfer data using DMA. -static int -ata_dma_transfer(struct disk_op_s *op) -{ - if (! CONFIG_ATA_DMA) - return -1; - dprintf(16, "ata_dma_transfer id=%p buf=%p\n", op->drive_fl, op->buf_fl); - - struct atadrive_s *adrive_gf = container_of( - op->drive_fl, struct atadrive_s, drive); - struct ata_channel_s *chan_gf = GET_GLOBALFLAT(adrive_gf->chan_gf); - u16 iomaster = GET_GLOBALFLAT(chan_gf->iomaster); - - // Start bus-master controller. - u8 oldcmd = inb(iomaster + BM_CMD); - outb(oldcmd | BM_CMD_START, iomaster + BM_CMD); - - u32 end = timer_calc(IDE_TIMEOUT); - u8 status; - for (;;) { - status = inb(iomaster + BM_STATUS); - if (status & BM_STATUS_IRQ) - break; - // Transfer in progress - if (timer_check(end)) { - // Timeout. - warn_timeout(); - break; - } - yield(); - } - outb(oldcmd & ~BM_CMD_START, iomaster + BM_CMD); - - u16 iobase1 = GET_GLOBALFLAT(chan_gf->iobase1); - u16 iobase2 = GET_GLOBALFLAT(chan_gf->iobase2); - int idestatus = pause_await_not_bsy(iobase1, iobase2); - - if ((status & (BM_STATUS_IRQ|BM_STATUS_ACTIVE)) == BM_STATUS_IRQ - && idestatus >= 0x00 - && (idestatus & (ATA_CB_STAT_BSY | ATA_CB_STAT_DF | ATA_CB_STAT_DRQ - | ATA_CB_STAT_ERR)) == 0x00) - // Success. - return 0; - - dprintf(6, "IDE DMA error (dma=%x ide=%x/%x/%x)\n", status, idestatus - , inb(iobase2 + ATA_CB_ASTAT), inb(iobase1 + ATA_CB_ERR)); - return -1; -} - - -/**************************************************************** - * ATA hard drive functions - ****************************************************************/ - -// Transfer data to harddrive using PIO protocol. -static int -ata_pio_cmd_data(struct disk_op_s *op, int iswrite, struct ata_pio_command *cmd) -{ - struct atadrive_s *adrive_gf = container_of( - op->drive_fl, struct atadrive_s, drive); - struct ata_channel_s *chan_gf = GET_GLOBALFLAT(adrive_gf->chan_gf); - u16 iobase1 = GET_GLOBALFLAT(chan_gf->iobase1); - u16 iobase2 = GET_GLOBALFLAT(chan_gf->iobase2); - - // Disable interrupts - outb(ATA_CB_DC_HD15 | ATA_CB_DC_NIEN, iobase2 + ATA_CB_DC); - - int ret = send_cmd(adrive_gf, cmd); - if (ret) - goto fail; - ret = ata_wait_data(iobase1); - if (ret) - goto fail; - ret = ata_pio_transfer(op, iswrite, DISK_SECTOR_SIZE); - -fail: - // Enable interrupts - outb(ATA_CB_DC_HD15, iobase2+ATA_CB_DC); - return ret; -} - -// Transfer data to harddrive using DMA protocol. -static int -ata_dma_cmd_data(struct disk_op_s *op, struct ata_pio_command *cmd) -{ - if (! CONFIG_ATA_DMA) - return -1; - struct atadrive_s *adrive_gf = container_of( - op->drive_fl, struct atadrive_s, drive); - int ret = send_cmd(adrive_gf, cmd); - if (ret) - return ret; - return ata_dma_transfer(op); -} - -// Read/write count blocks from a harddrive. -static int -ata_readwrite(struct disk_op_s *op, int iswrite) -{ - u64 lba = op->lba; - - int usepio = ata_try_dma(op, iswrite, DISK_SECTOR_SIZE); - - struct ata_pio_command cmd; - memset(&cmd, 0, sizeof(cmd)); - - if (op->count >= (1<<8) || lba + op->count >= (1<<28)) { - cmd.sector_count2 = op->count >> 8; - cmd.lba_low2 = lba >> 24; - cmd.lba_mid2 = lba >> 32; - cmd.lba_high2 = lba >> 40; - lba &= 0xffffff; - - if (usepio) - cmd.command = (iswrite ? ATA_CMD_WRITE_SECTORS_EXT - : ATA_CMD_READ_SECTORS_EXT); - else - cmd.command = (iswrite ? ATA_CMD_WRITE_DMA_EXT - : ATA_CMD_READ_DMA_EXT); - } else { - if (usepio) - cmd.command = (iswrite ? ATA_CMD_WRITE_SECTORS - : ATA_CMD_READ_SECTORS); - else - cmd.command = (iswrite ? ATA_CMD_WRITE_DMA - : ATA_CMD_READ_DMA); - } - - cmd.sector_count = op->count; - cmd.lba_low = lba; - cmd.lba_mid = lba >> 8; - cmd.lba_high = lba >> 16; - cmd.device = ((lba >> 24) & 0xf) | ATA_CB_DH_LBA; - - int ret; - if (usepio) - ret = ata_pio_cmd_data(op, iswrite, &cmd); - else - ret = ata_dma_cmd_data(op, &cmd); - if (ret) - return DISK_RET_EBADTRACK; - return DISK_RET_SUCCESS; -} - -// 16bit command demuxer for ATA harddrives. -int -ata_process_op(struct disk_op_s *op) -{ - if (!CONFIG_ATA) - return 0; - - struct atadrive_s *adrive_gf = container_of( - op->drive_fl, struct atadrive_s, drive); - switch (op->command) { - case CMD_READ: - return ata_readwrite(op, 0); - case CMD_WRITE: - return ata_readwrite(op, 1); - case CMD_RESET: - ata_reset(adrive_gf); - return DISK_RET_SUCCESS; - case CMD_ISREADY: - return isready(adrive_gf); - default: - return default_process_op(op); - } -} - - -/**************************************************************** - * ATAPI functions - ****************************************************************/ - -#define CDROM_CDB_SIZE 12 - -// Low-level atapi command transmit function. -int -ata_atapi_process_op(struct disk_op_s *op) -{ - if (! CONFIG_ATA) - return 0; - - if (op->command == CMD_WRITE || op->command == CMD_FORMAT) - return DISK_RET_EWRITEPROTECT; - u8 cdbcmd[CDROM_CDB_SIZE]; - int blocksize = scsi_fill_cmd(op, cdbcmd, sizeof(cdbcmd)); - if (blocksize < 0) - return default_process_op(op); - - struct atadrive_s *adrive_gf = container_of( - op->drive_fl, struct atadrive_s, drive); - struct ata_channel_s *chan_gf = GET_GLOBALFLAT(adrive_gf->chan_gf); - u16 iobase1 = GET_GLOBALFLAT(chan_gf->iobase1); - u16 iobase2 = GET_GLOBALFLAT(chan_gf->iobase2); - - struct ata_pio_command cmd; - memset(&cmd, 0, sizeof(cmd)); - cmd.lba_mid = blocksize; - cmd.lba_high = blocksize >> 8; - cmd.command = ATA_CMD_PACKET; - - // Disable interrupts - outb(ATA_CB_DC_HD15 | ATA_CB_DC_NIEN, iobase2 + ATA_CB_DC); - - int ret = send_cmd(adrive_gf, &cmd); - if (ret) - goto fail; - ret = ata_wait_data(iobase1); - if (ret) - goto fail; - - // Send command to device - outsw_fl(iobase1, MAKE_FLATPTR(GET_SEG(SS), cdbcmd), CDROM_CDB_SIZE / 2); - - int status = pause_await_not_bsy(iobase1, iobase2); - if (status < 0) { - ret = status; - goto fail; - } - - if (status & ATA_CB_STAT_ERR) { - u8 err = inb(iobase1 + ATA_CB_ERR); - // skip "Not Ready" - if (err != 0x20) - dprintf(6, "send_atapi_cmd : read error (status=%02x err=%02x)\n" - , status, err); - ret = -2; - goto fail; - } - if (blocksize) { - if (!(status & ATA_CB_STAT_DRQ)) { - dprintf(6, "send_atapi_cmd : DRQ not set (status %02x)\n", status); - ret = -3; - goto fail; - } - - ret = ata_pio_transfer(op, 0, blocksize); - } - -fail: - // Enable interrupts - outb(ATA_CB_DC_HD15, iobase2+ATA_CB_DC); - if (ret) - return DISK_RET_EBADTRACK; - return DISK_RET_SUCCESS; -} - - -/**************************************************************** - * ATA detect and init - ****************************************************************/ - -// Send an identify device or identify device packet command. -static int -send_ata_identity(struct atadrive_s *adrive, u16 *buffer, int command) -{ - memset(buffer, 0, DISK_SECTOR_SIZE); - - struct disk_op_s dop; - memset(&dop, 0, sizeof(dop)); - dop.drive_fl = &adrive->drive; - dop.count = 1; - dop.lba = 1; - dop.buf_fl = MAKE_FLATPTR(GET_SEG(SS), buffer); - - struct ata_pio_command cmd; - memset(&cmd, 0, sizeof(cmd)); - cmd.command = command; - - return ata_pio_cmd_data(&dop, 0, &cmd); -} - -// Extract the ATA/ATAPI version info. -int -ata_extract_version(u16 *buffer) -{ - // Extract ATA/ATAPI version. - u16 ataversion = buffer[80]; - u8 version; - for (version=15; version>0; version--) - if (ataversion & (1<<version)) - break; - return version; -} - -#define MAXMODEL 40 - -// Extract the ATA/ATAPI model info. -char * -ata_extract_model(char *model, u32 size, u16 *buffer) -{ - // Read model name - int i; - for (i=0; i<size/2; i++) - *(u16*)&model[i*2] = be16_to_cpu(buffer[27+i]); - model[size] = 0x00; - nullTrailingSpace(model); - return model; -} - -// Common init code between ata and atapi -static struct atadrive_s * -init_atadrive(struct atadrive_s *dummy, u16 *buffer) -{ - struct atadrive_s *adrive = malloc_fseg(sizeof(*adrive)); - if (!adrive) { - warn_noalloc(); - return NULL; - } - memset(adrive, 0, sizeof(*adrive)); - adrive->chan_gf = dummy->chan_gf; - adrive->slave = dummy->slave; - adrive->drive.cntl_id = adrive->chan_gf->ataid * 2 + dummy->slave; - adrive->drive.removable = (buffer[0] & 0x80) ? 1 : 0; - return adrive; -} - -// Detect if the given drive is an atapi - initialize it if so. -static struct atadrive_s * -init_drive_atapi(struct atadrive_s *dummy, u16 *buffer) -{ - // Send an IDENTIFY_DEVICE_PACKET command to device - int ret = send_ata_identity(dummy, buffer, ATA_CMD_IDENTIFY_PACKET_DEVICE); - if (ret) - return NULL; - - // Success - setup as ATAPI. - struct atadrive_s *adrive = init_atadrive(dummy, buffer); - if (!adrive) - return NULL; - adrive->drive.type = DTYPE_ATA_ATAPI; - adrive->drive.blksize = CDROM_SECTOR_SIZE; - adrive->drive.sectors = (u64)-1; - u8 iscd = ((buffer[0] >> 8) & 0x1f) == 0x05; - char model[MAXMODEL+1]; - char *desc = znprintf(MAXDESCSIZE - , "DVD/CD [ata%d-%d: %s ATAPI-%d %s]" - , adrive->chan_gf->ataid, adrive->slave - , ata_extract_model(model, MAXMODEL, buffer) - , ata_extract_version(buffer) - , (iscd ? "DVD/CD" : "Device")); - dprintf(1, "%s\n", desc); - - // fill cdidmap - if (iscd) { - int prio = bootprio_find_ata_device(adrive->chan_gf->pci_tmp, - adrive->chan_gf->chanid, - adrive->slave); - boot_lchs_find_ata_device(adrive->chan_gf->pci_tmp, - adrive->chan_gf->chanid, - adrive->slave, - &(adrive->drive.lchs)); - boot_add_cd(&adrive->drive, desc, prio); - } - - return adrive; -} - -// Detect if the given drive is a regular ata drive - initialize it if so. -static struct atadrive_s * -init_drive_ata(struct atadrive_s *dummy, u16 *buffer) -{ - // Send an IDENTIFY_DEVICE command to device - int ret = send_ata_identity(dummy, buffer, ATA_CMD_IDENTIFY_DEVICE); - if (ret) - return NULL; - - // Success - setup as ATA. - struct atadrive_s *adrive = init_atadrive(dummy, buffer); - if (!adrive) - return NULL; - adrive->drive.type = DTYPE_ATA; - adrive->drive.blksize = DISK_SECTOR_SIZE; - - adrive->drive.pchs.cylinder = buffer[1]; - adrive->drive.pchs.head = buffer[3]; - adrive->drive.pchs.sector = buffer[6]; - - u64 sectors; - if (buffer[83] & (1 << 10)) // word 83 - lba48 support - sectors = *(u64*)&buffer[100]; // word 100-103 - else - sectors = *(u32*)&buffer[60]; // word 60 and word 61 - adrive->drive.sectors = sectors; - u64 adjsize = sectors >> 11; - char adjprefix = 'M'; - if (adjsize >= (1 << 16)) { - adjsize >>= 10; - adjprefix = 'G'; - } - char model[MAXMODEL+1]; - char *desc = znprintf(MAXDESCSIZE - , "ata%d-%d: %s ATA-%d Hard-Disk (%u %ciBytes)" - , adrive->chan_gf->ataid, adrive->slave - , ata_extract_model(model, MAXMODEL, buffer) - , ata_extract_version(buffer) - , (u32)adjsize, adjprefix); - dprintf(1, "%s\n", desc); - - int prio = bootprio_find_ata_device(adrive->chan_gf->pci_tmp, - adrive->chan_gf->chanid, - adrive->slave); - boot_lchs_find_ata_device(adrive->chan_gf->pci_tmp, - adrive->chan_gf->chanid, - adrive->slave, - &(adrive->drive.lchs)); - // Register with bcv system. - boot_add_hd(&adrive->drive, desc, prio); - - return adrive; -} - -static u32 SpinupEnd; - -// Wait for non-busy status and check for "floating bus" condition. -static int -powerup_await_non_bsy(u16 base) -{ - u8 orstatus = 0; - u8 status; - for (;;) { - status = inb(base+ATA_CB_STAT); - if (!(status & ATA_CB_STAT_BSY)) - break; - orstatus |= status; - if (orstatus == 0xff) { - dprintf(4, "powerup IDE floating\n"); - return orstatus; - } - if (timer_check(SpinupEnd)) { - warn_timeout(); - return -1; - } - yield(); - } - dprintf(6, "powerup iobase=%x st=%x\n", base, status); - return status; -} - -// Detect any drives attached to a given controller. -static void -ata_detect(void *data) -{ - struct ata_channel_s *chan_gf = data; - struct atadrive_s dummy; - memset(&dummy, 0, sizeof(dummy)); - dummy.chan_gf = chan_gf; - // Device detection - int didreset = 0; - u8 slave; - for (slave=0; slave<=1; slave++) { - // Wait for not-bsy. - u16 iobase1 = chan_gf->iobase1; - int status = powerup_await_non_bsy(iobase1); - if (status < 0) - continue; - u8 newdh = slave ? ATA_CB_DH_DEV1 : ATA_CB_DH_DEV0; - outb(newdh, iobase1+ATA_CB_DH); - ndelay(400); - status = powerup_await_non_bsy(iobase1); - if (status < 0) - continue; - - // Check if ioport registers look valid. - outb(newdh, iobase1+ATA_CB_DH); - u8 dh = inb(iobase1+ATA_CB_DH); - outb(0x55, iobase1+ATA_CB_SC); - outb(0xaa, iobase1+ATA_CB_SN); - u8 sc = inb(iobase1+ATA_CB_SC); - u8 sn = inb(iobase1+ATA_CB_SN); - dprintf(6, "ata_detect ata%d-%d: sc=%x sn=%x dh=%x\n" - , chan_gf->ataid, slave, sc, sn, dh); - if (sc != 0x55 || sn != 0xaa || dh != newdh) - continue; - - // Prepare new drive. - dummy.slave = slave; - - // reset the channel - if (!didreset) { - ata_reset(&dummy); - didreset = 1; - } - - // check for ATAPI - u16 buffer[256]; - struct atadrive_s *adrive = init_drive_atapi(&dummy, buffer); - if (!adrive) { - // Didn't find an ATAPI drive - look for ATA drive. - u8 st = inb(iobase1+ATA_CB_STAT); - if (!st) - // Status not set - can't be a valid drive. - continue; - - // Wait for RDY. - int ret = await_rdy(iobase1); - if (ret < 0) - continue; - - // check for ATA. - adrive = init_drive_ata(&dummy, buffer); - if (!adrive) - // No ATA drive found - continue; - } - - u16 resetresult = buffer[93]; - dprintf(6, "ata_detect resetresult=%04x\n", resetresult); - if (!slave && (resetresult & 0xdf61) == 0x4041) - // resetresult looks valid and device 0 is responding to - // device 1 requests - device 1 must not be present - skip - // detection. - break; - } -} - -// Initialize an ata controller and detect its drives. -static void -init_controller(struct pci_device *pci, int chanid, int irq - , u32 port1, u32 port2, u32 master) -{ - static int ataid = 0; - struct ata_channel_s *chan_gf = malloc_fseg(sizeof(*chan_gf)); - if (!chan_gf) { - warn_noalloc(); - return; - } - chan_gf->ataid = ataid++; - chan_gf->chanid = chanid; - chan_gf->irq = irq; - chan_gf->pci_bdf = pci ? pci->bdf : -1; - chan_gf->pci_tmp = pci; - chan_gf->iobase1 = port1; - chan_gf->iobase2 = port2; - chan_gf->iomaster = master; - dprintf(1, "ATA controller %d at %x/%x/%x (irq %d dev %x)\n" - , ataid, port1, port2, master, irq, chan_gf->pci_bdf); - run_thread(ata_detect, chan_gf); -} - -#define IRQ_ATA1 14 -#define IRQ_ATA2 15 - -// Handle controllers on an ATA PCI device. -static void -init_pciata(struct pci_device *pci, u8 prog_if) -{ - u8 pciirq = pci_config_readb(pci->bdf, PCI_INTERRUPT_LINE); - int master = 0; - if (CONFIG_ATA_DMA && prog_if & 0x80) { - // Check for bus-mastering. - u32 bar = pci_config_readl(pci->bdf, PCI_BASE_ADDRESS_4); - if (bar & PCI_BASE_ADDRESS_SPACE_IO) { - master = pci_enable_iobar(pci, PCI_BASE_ADDRESS_4); - pci_enable_busmaster(pci); - } - } - - u32 port1, port2, irq; - if (prog_if & 1) { - port1 = pci_enable_iobar(pci, PCI_BASE_ADDRESS_0); - port2 = pci_enable_iobar(pci, PCI_BASE_ADDRESS_1); - if (!port1 || !port2) - return; - irq = pciirq; - } else { - port1 = PORT_ATA1_CMD_BASE; - port2 = PORT_ATA1_CTRL_BASE; - irq = IRQ_ATA1; - } - init_controller(pci, 0, irq, port1, port2, master); - - if (prog_if & 4) { - port1 = pci_enable_iobar(pci, PCI_BASE_ADDRESS_2); - port2 = pci_enable_iobar(pci, PCI_BASE_ADDRESS_3); - if (!port1 || !port2) - return; - irq = pciirq; - } else { - port1 = PORT_ATA2_CMD_BASE; - port2 = PORT_ATA2_CTRL_BASE; - irq = IRQ_ATA2; - } - init_controller(pci, 1, irq, port1, port2, master ? master + 8 : 0); -} - -static void -found_genericata(struct pci_device *pci, void *arg) -{ - init_pciata(pci, pci->prog_if); -} - -static void -found_compatibleahci(struct pci_device *pci, void *arg) -{ - if (CONFIG_AHCI) - // Already handled directly via native ahci interface. - return; - init_pciata(pci, 0x8f); -} - -static const struct pci_device_id pci_ata_tbl[] = { - PCI_DEVICE_CLASS(PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE - , found_genericata), - PCI_DEVICE(PCI_VENDOR_ID_ATI, 0x4391, found_compatibleahci), - PCI_DEVICE_END, -}; - -// Locate and init ata controllers. -static void -ata_scan(void) -{ - if (CONFIG_QEMU && hlist_empty(&PCIDevices)) { - // No PCI devices found - probably a QEMU "-M isapc" machine. - // Try using ISA ports for ATA controllers. - init_controller(NULL, 0, IRQ_ATA1 - , PORT_ATA1_CMD_BASE, PORT_ATA1_CTRL_BASE, 0); - init_controller(NULL, 1, IRQ_ATA2 - , PORT_ATA2_CMD_BASE, PORT_ATA2_CTRL_BASE, 0); - return; - } - - // Scan PCI bus for ATA adapters - struct pci_device *pci; - foreachpci(pci) { - pci_init_device(pci_ata_tbl, pci, NULL); - } -} - -void -ata_setup(void) -{ - ASSERT32FLAT(); - if (!CONFIG_ATA) - return; - - dprintf(3, "init hard drives\n"); - - SpinupEnd = timer_calc(IDE_TIMEOUT); - ata_scan(); - - SET_BDA(disk_control_byte, 0xc0); - - enable_hwirq(14, FUNC16(entry_76)); -} diff --git a/payloads/external/SeaBIOS/src/hw/ata.h b/payloads/external/SeaBIOS/src/hw/ata.h deleted file mode 100644 index 9de24906..00000000 --- a/payloads/external/SeaBIOS/src/hw/ata.h +++ /dev/null @@ -1,163 +0,0 @@ -#ifndef __ATA_H -#define __ATA_H - -#include "block.h" // struct drive_s -#include "config.h" // CONFIG_MAX_ATA_INTERFACES -#include "types.h" // u8 - -struct ata_channel_s { - u16 iobase1; - u16 iobase2; - u16 iomaster; - u8 irq; - u8 chanid; - u8 ataid; - int pci_bdf; - struct pci_device *pci_tmp; -}; - -struct atadrive_s { - struct drive_s drive; - struct ata_channel_s *chan_gf; - u8 slave; -}; - -// ata.c -char *ata_extract_model(char *model, u32 size, u16 *buffer); -int ata_extract_version(u16 *buffer); -int ata_process_op(struct disk_op_s *op); -int ata_atapi_process_op(struct disk_op_s *op); -void ata_setup(void); - -#define PORT_ATA2_CMD_BASE 0x0170 -#define PORT_ATA1_CMD_BASE 0x01f0 -#define PORT_ATA2_CTRL_BASE 0x0374 -#define PORT_ATA1_CTRL_BASE 0x03f4 - -// Global defines -- ATA register and register bits. -// command block & control block regs -#define ATA_CB_DATA 0 // data reg in/out pio_base_addr1+0 -#define ATA_CB_ERR 1 // error in pio_base_addr1+1 -#define ATA_CB_FR 1 // feature reg out pio_base_addr1+1 -#define ATA_CB_SC 2 // sector count in/out pio_base_addr1+2 -#define ATA_CB_SN 3 // sector number in/out pio_base_addr1+3 -#define ATA_CB_CL 4 // cylinder low in/out pio_base_addr1+4 -#define ATA_CB_CH 5 // cylinder high in/out pio_base_addr1+5 -#define ATA_CB_DH 6 // device head in/out pio_base_addr1+6 -#define ATA_CB_STAT 7 // primary status in pio_base_addr1+7 -#define ATA_CB_CMD 7 // command out pio_base_addr1+7 - -#define ATA_CB_ASTAT 2 // alternate status in pio_base_addr2+2 -#define ATA_CB_DC 2 // device control out pio_base_addr2+2 -#define ATA_CB_DA 3 // device address in pio_base_addr2+3 - -#define ATA_CB_ER_ICRC 0x80 // ATA Ultra DMA bad CRC -#define ATA_CB_ER_BBK 0x80 // ATA bad block -#define ATA_CB_ER_UNC 0x40 // ATA uncorrected error -#define ATA_CB_ER_MC 0x20 // ATA media change -#define ATA_CB_ER_IDNF 0x10 // ATA id not found -#define ATA_CB_ER_MCR 0x08 // ATA media change request -#define ATA_CB_ER_ABRT 0x04 // ATA command aborted -#define ATA_CB_ER_NTK0 0x02 // ATA track 0 not found -#define ATA_CB_ER_NDAM 0x01 // ATA address mark not found - -#define ATA_CB_ER_P_SNSKEY 0xf0 // ATAPI sense key (mask) -#define ATA_CB_ER_P_MCR 0x08 // ATAPI Media Change Request -#define ATA_CB_ER_P_ABRT 0x04 // ATAPI command abort -#define ATA_CB_ER_P_EOM 0x02 // ATAPI End of Media -#define ATA_CB_ER_P_ILI 0x01 // ATAPI Illegal Length Indication - -// ATAPI Interrupt Reason bits in the Sector Count reg (CB_SC) -#define ATA_CB_SC_P_TAG 0xf8 // ATAPI tag (mask) -#define ATA_CB_SC_P_REL 0x04 // ATAPI release -#define ATA_CB_SC_P_IO 0x02 // ATAPI I/O -#define ATA_CB_SC_P_CD 0x01 // ATAPI C/D - -// bits 7-4 of the device/head (CB_DH) reg -#define ATA_CB_DH_DEV0 0xa0 // select device 0 -#define ATA_CB_DH_DEV1 0xb0 // select device 1 -#define ATA_CB_DH_LBA 0x40 // use LBA - -// status reg (CB_STAT and CB_ASTAT) bits -#define ATA_CB_STAT_BSY 0x80 // busy -#define ATA_CB_STAT_RDY 0x40 // ready -#define ATA_CB_STAT_DF 0x20 // device fault -#define ATA_CB_STAT_WFT 0x20 // write fault (old name) -#define ATA_CB_STAT_SKC 0x10 // seek complete -#define ATA_CB_STAT_SERV 0x10 // service -#define ATA_CB_STAT_DRQ 0x08 // data request -#define ATA_CB_STAT_CORR 0x04 // corrected -#define ATA_CB_STAT_IDX 0x02 // index -#define ATA_CB_STAT_ERR 0x01 // error (ATA) -#define ATA_CB_STAT_CHK 0x01 // check (ATAPI) - -// device control reg (CB_DC) bits -#define ATA_CB_DC_HD15 0x08 // bit should always be set to one -#define ATA_CB_DC_SRST 0x04 // soft reset -#define ATA_CB_DC_NIEN 0x02 // disable interrupts - -// Most mandtory and optional ATA commands (from ATA-3), -#define ATA_CMD_NOP 0x00 -#define ATA_CMD_CFA_REQUEST_EXT_ERR_CODE 0x03 -#define ATA_CMD_DEVICE_RESET 0x08 -#define ATA_CMD_RECALIBRATE 0x10 -#define ATA_CMD_READ_SECTORS 0x20 -#define ATA_CMD_READ_SECTORS_EXT 0x24 -#define ATA_CMD_READ_DMA_EXT 0x25 -#define ATA_CMD_READ_DMA_QUEUED_EXT 0x26 -#define ATA_CMD_READ_NATIVE_MAX_ADDRESS_EXT 0x27 -#define ATA_CMD_READ_MULTIPLE_EXT 0x29 -#define ATA_CMD_READ_LOG_EXT 0x2F -#define ATA_CMD_WRITE_SECTORS 0x30 -#define ATA_CMD_WRITE_SECTORS_EXT 0x34 -#define ATA_CMD_WRITE_DMA_EXT 0x35 -#define ATA_CMD_WRITE_DMA_QUEUED_EXT 0x36 -#define ATA_CMD_SET_MAX_ADDRESS_EXT 0x37 -#define ATA_CMD_CFA_WRITE_SECTORS_WO_ERASE 0x38 -#define ATA_CMD_WRITE_MULTIPLE_EXT 0x39 -#define ATA_CMD_WRITE_VERIFY 0x3C -#define ATA_CMD_WRITE_LOG_EXT 0x3F -#define ATA_CMD_READ_VERIFY_SECTORS 0x40 -#define ATA_CMD_READ_VERIFY_SECTORS_EXT 0x42 -#define ATA_CMD_FORMAT_TRACK 0x50 -#define ATA_CMD_SEEK 0x70 -#define ATA_CMD_CFA_TRANSLATE_SECTOR 0x87 -#define ATA_CMD_EXECUTE_DEVICE_DIAGNOSTIC 0x90 -#define ATA_CMD_INITIALIZE_DEVICE_PARAMETERS 0x91 -#define ATA_CMD_STANDBY_IMMEDIATE2 0x94 -#define ATA_CMD_IDLE_IMMEDIATE2 0x95 -#define ATA_CMD_STANDBY2 0x96 -#define ATA_CMD_IDLE2 0x97 -#define ATA_CMD_CHECK_POWER_MODE2 0x98 -#define ATA_CMD_SLEEP2 0x99 -#define ATA_CMD_PACKET 0xA0 -#define ATA_CMD_IDENTIFY_PACKET_DEVICE 0xA1 -#define ATA_CMD_CFA_ERASE_SECTORS 0xC0 -#define ATA_CMD_READ_MULTIPLE 0xC4 -#define ATA_CMD_WRITE_MULTIPLE 0xC5 -#define ATA_CMD_SET_MULTIPLE_MODE 0xC6 -#define ATA_CMD_READ_DMA_QUEUED 0xC7 -#define ATA_CMD_READ_DMA 0xC8 -#define ATA_CMD_WRITE_DMA 0xCA -#define ATA_CMD_WRITE_DMA_QUEUED 0xCC -#define ATA_CMD_CFA_WRITE_MULTIPLE_WO_ERASE 0xCD -#define ATA_CMD_STANDBY_IMMEDIATE 0xE0 -#define ATA_CMD_IDLE_IMMEDIATE 0xE1 -#define ATA_CMD_STANDBY 0xE2 -#define ATA_CMD_IDLE 0xE3 -#define ATA_CMD_READ_BUFFER 0xE4 -#define ATA_CMD_CHECK_POWER_MODE 0xE5 -#define ATA_CMD_SLEEP 0xE6 -#define ATA_CMD_FLUSH_CACHE 0xE7 -#define ATA_CMD_WRITE_BUFFER 0xE8 -#define ATA_CMD_IDENTIFY_DEVICE 0xEC -#define ATA_CMD_SET_FEATURES 0xEF -#define ATA_CMD_READ_NATIVE_MAX_ADDRESS 0xF8 -#define ATA_CMD_SET_MAX 0xF9 - -#define ATA_SET_FEATRUE_TRANSFER_MODE 0x03 -#define ATA_TRANSFER_MODE_ULTRA_DMA 0x40 -#define ATA_TRANSFER_MODE_MULTIWORD_DMA 0x20 -#define ATA_TRANSFER_MODE_PIO_FLOW_CTRL 0x08 -#define ATA_TRANSFER_MODE_DEFAULT_PIO 0x00 -#endif // ata.h diff --git a/payloads/external/SeaBIOS/src/hw/blockcmd.c b/payloads/external/SeaBIOS/src/hw/blockcmd.c deleted file mode 100644 index 6b6fea97..00000000 --- a/payloads/external/SeaBIOS/src/hw/blockcmd.c +++ /dev/null @@ -1,376 +0,0 @@ -// Support for several common scsi like command data block requests -// -// Copyright (C) 2010 Kevin O'Connor <kevin@koconnor.net> -// Copyright (C) 2002 MandrakeSoft S.A. -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "block.h" // struct disk_op_s -#include "blockcmd.h" // struct cdb_request_sense -#include "byteorder.h" // be32_to_cpu -#include "farptr.h" // GET_FLATPTR -#include "output.h" // dprintf -#include "std/disk.h" // DISK_RET_EPARAM -#include "string.h" // memset -#include "util.h" // timer_calc -#include "malloc.h" - - -/**************************************************************** - * Low level command requests - ****************************************************************/ - -static int -cdb_get_inquiry(struct disk_op_s *op, struct cdbres_inquiry *data) -{ - struct cdb_request_sense cmd; - memset(&cmd, 0, sizeof(cmd)); - cmd.command = CDB_CMD_INQUIRY; - cmd.length = sizeof(*data); - op->command = CMD_SCSI; - op->count = 1; - op->buf_fl = data; - op->cdbcmd = &cmd; - op->blocksize = sizeof(*data); - return process_op(op); -} - -// Request SENSE -static int -cdb_get_sense(struct disk_op_s *op, struct cdbres_request_sense *data) -{ - struct cdb_request_sense cmd; - memset(&cmd, 0, sizeof(cmd)); - cmd.command = CDB_CMD_REQUEST_SENSE; - cmd.length = sizeof(*data); - op->command = CMD_SCSI; - op->count = 1; - op->buf_fl = data; - op->cdbcmd = &cmd; - op->blocksize = sizeof(*data); - return process_op(op); -} - -// Test unit ready -static int -cdb_test_unit_ready(struct disk_op_s *op) -{ - struct cdb_request_sense cmd; - memset(&cmd, 0, sizeof(cmd)); - cmd.command = CDB_CMD_TEST_UNIT_READY; - op->command = CMD_SCSI; - op->count = 0; - op->buf_fl = NULL; - op->cdbcmd = &cmd; - op->blocksize = 0; - return process_op(op); -} - -// Request capacity -static int -cdb_read_capacity(struct disk_op_s *op, struct cdbres_read_capacity *data) -{ - struct cdb_read_capacity cmd; - memset(&cmd, 0, sizeof(cmd)); - cmd.command = CDB_CMD_READ_CAPACITY; - op->command = CMD_SCSI; - op->count = 1; - op->buf_fl = data; - op->cdbcmd = &cmd; - op->blocksize = sizeof(*data); - return process_op(op); -} - -// Mode sense, geometry page. -static int -cdb_mode_sense_geom(struct disk_op_s *op, struct cdbres_mode_sense_geom *data) -{ - struct cdb_mode_sense cmd; - memset(&cmd, 0, sizeof(cmd)); - cmd.command = CDB_CMD_MODE_SENSE; - cmd.flags = 8; /* DBD */ - cmd.page = MODE_PAGE_HD_GEOMETRY; - cmd.count = cpu_to_be16(sizeof(*data)); - op->command = CMD_SCSI; - op->count = 1; - op->buf_fl = data; - op->cdbcmd = &cmd; - op->blocksize = sizeof(*data); - return process_op(op); -} - - -/**************************************************************** - * Main SCSI commands - ****************************************************************/ - -// Create a scsi command request from a disk_op_s request -int -scsi_fill_cmd(struct disk_op_s *op, void *cdbcmd, int maxcdb) -{ - switch (op->command) { - case CMD_READ: - case CMD_WRITE: ; - struct cdb_rwdata_10 *cmd = cdbcmd; - memset(cmd, 0, maxcdb); - cmd->command = (op->command == CMD_READ ? CDB_CMD_READ_10 - : CDB_CMD_WRITE_10); - cmd->lba = cpu_to_be32(op->lba); - cmd->count = cpu_to_be16(op->count); - return GET_FLATPTR(op->drive_fl->blksize); - case CMD_SCSI: - if (MODESEGMENT) - return -1; - memcpy(cdbcmd, op->cdbcmd, maxcdb); - return op->blocksize; - default: - return -1; - } -} - -// Determine if the command is a request to pull data from the device -int -scsi_is_read(struct disk_op_s *op) -{ - return op->command == CMD_READ || ( - !MODESEGMENT && op->command == CMD_SCSI && op->blocksize); -} - -// Check if a SCSI device is ready to receive commands -int -scsi_is_ready(struct disk_op_s *op) -{ - ASSERT32FLAT(); - dprintf(6, "scsi_is_ready (drive=%p)\n", op->drive_fl); - - /* Retry TEST UNIT READY for 5 seconds unless MEDIUM NOT PRESENT is - * reported by the device 3 times. If the device reports "IN PROGRESS", - * 30 seconds is added. */ - int tries = 3; - int in_progress = 0; - u32 end = timer_calc(5000); - for (;;) { - if (timer_check(end)) { - dprintf(1, "test unit ready failed\n"); - return -1; - } - - int ret = cdb_test_unit_ready(op); - if (!ret) - // Success - break; - - struct cdbres_request_sense sense; - ret = cdb_get_sense(op, &sense); - if (ret) - // Error - retry. - continue; - - // Sense succeeded. - if (sense.asc == 0x3a) { /* MEDIUM NOT PRESENT */ - tries--; - dprintf(1, "Device reports MEDIUM NOT PRESENT - %d tries left\n", - tries); - if (!tries) - return -1; - } - - if (sense.asc == 0x04 && sense.ascq == 0x01 && !in_progress) { - /* IN PROGRESS OF BECOMING READY */ - dprintf(1, "Waiting for device to detect medium... "); - /* Allow 30 seconds more */ - end = timer_calc(30000); - in_progress = 1; - } - } - return 0; -} - -#define CDB_CMD_REPORT_LUNS 0xA0 - -struct cdb_report_luns { - u8 command; - u8 reserved_01[5]; - u32 length; - u8 pad[6]; -} PACKED; - -struct scsi_lun { - u16 lun[4]; -}; - -struct cdbres_report_luns { - u32 length; - u32 reserved; - struct scsi_lun luns[]; -}; - -static u64 scsilun2u64(struct scsi_lun *scsi_lun) -{ - int i; - u64 ret = 0; - for (i = 0; i < ARRAY_SIZE(scsi_lun->lun); i++) - ret |= be16_to_cpu(scsi_lun->lun[i]) << (16 * i); - return ret; -} - -// Issue REPORT LUNS on a temporary drive and iterate reported luns calling -// @add_lun for each -int scsi_rep_luns_scan(struct drive_s *tmp_drive, scsi_add_lun add_lun) -{ - int ret = -1; - /* start with the smallest possible buffer, otherwise some devices in QEMU - * may (incorrectly) error out on returning less data than fits in it */ - u32 maxluns = 1; - u32 nluns, i; - struct cdb_report_luns cdb = { - .command = CDB_CMD_REPORT_LUNS, - }; - struct disk_op_s op = { - .drive_fl = tmp_drive, - .command = CMD_SCSI, - .count = 1, - .cdbcmd = &cdb, - }; - struct cdbres_report_luns *resp; - - ASSERT32FLAT(); - - while (1) { - op.blocksize = sizeof(struct cdbres_report_luns) + - maxluns * sizeof(struct scsi_lun); - op.buf_fl = malloc_tmp(op.blocksize); - if (!op.buf_fl) { - warn_noalloc(); - return -1; - } - - cdb.length = cpu_to_be32(op.blocksize); - if (process_op(&op) != DISK_RET_SUCCESS) - goto out; - - resp = op.buf_fl; - nluns = be32_to_cpu(resp->length) / sizeof(struct scsi_lun); - if (nluns <= maxluns) - break; - - free(op.buf_fl); - maxluns = nluns; - } - - for (i = 0, ret = 0; i < nluns; i++) { - u64 lun = scsilun2u64(&resp->luns[i]); - if (lun >> 32) - continue; - ret += !add_lun((u32)lun, tmp_drive); - } -out: - free(op.buf_fl); - return ret; -} - -// Iterate LUNs on the target and call @add_lun for each -int scsi_sequential_scan(struct drive_s *tmp_drive, u32 maxluns, - scsi_add_lun add_lun) -{ - int ret; - u32 lun; - - for (lun = 0, ret = 0; lun < maxluns; lun++) - ret += !add_lun(lun, tmp_drive); - return ret; -} - -// Validate drive, find block size / sector count, and register drive. -int -scsi_drive_setup(struct drive_s *drive, const char *s, int prio) -{ - ASSERT32FLAT(); - struct disk_op_s dop; - memset(&dop, 0, sizeof(dop)); - dop.drive_fl = drive; - struct cdbres_inquiry data; - int ret = cdb_get_inquiry(&dop, &data); - if (ret) - return ret; - char vendor[sizeof(data.vendor)+1], product[sizeof(data.product)+1]; - char rev[sizeof(data.rev)+1]; - strtcpy(vendor, data.vendor, sizeof(vendor)); - nullTrailingSpace(vendor); - strtcpy(product, data.product, sizeof(product)); - nullTrailingSpace(product); - strtcpy(rev, data.rev, sizeof(rev)); - nullTrailingSpace(rev); - int pdt = data.pdt & 0x1f; - int removable = !!(data.removable & 0x80); - dprintf(1, "%s vendor='%s' product='%s' rev='%s' type=%d removable=%d\n" - , s, vendor, product, rev, pdt, removable); - drive->removable = removable; - - if (pdt == SCSI_TYPE_CDROM) { - drive->blksize = CDROM_SECTOR_SIZE; - drive->sectors = (u64)-1; - - char *desc = znprintf(MAXDESCSIZE, "DVD/CD [%s Drive %s %s %s]" - , s, vendor, product, rev); - boot_add_cd(drive, desc, prio); - return 0; - } - - if (pdt != SCSI_TYPE_DISK) - return -1; - - ret = scsi_is_ready(&dop); - if (ret) { - dprintf(1, "scsi_is_ready returned %d\n", ret); - return ret; - } - - struct cdbres_read_capacity capdata; - ret = cdb_read_capacity(&dop, &capdata); - if (ret) - return ret; - - // READ CAPACITY returns the address of the last block. - // We do not bother with READ CAPACITY(16) because BIOS does not support - // 64-bit LBA anyway. - drive->blksize = be32_to_cpu(capdata.blksize); - if (drive->blksize != DISK_SECTOR_SIZE) { - dprintf(1, "%s: unsupported block size %d\n", s, drive->blksize); - return -1; - } - drive->sectors = (u64)be32_to_cpu(capdata.sectors) + 1; - dprintf(1, "%s blksize=%d sectors=%u\n" - , s, drive->blksize, (unsigned)drive->sectors); - - // We do not recover from USB stalls, so try to be safe and avoid - // sending the command if the (obsolete, but still provided by QEMU) - // fixed disk geometry page may not be supported. - // - // We could also send the command only to small disks (e.g. <504MiB) - // but some old USB keys only support a very small subset of SCSI which - // does not even include the MODE SENSE command! - // - if (CONFIG_QEMU_HARDWARE && memcmp(vendor, "QEMU", 5) == 0) { - struct cdbres_mode_sense_geom geomdata; - ret = cdb_mode_sense_geom(&dop, &geomdata); - if (ret == 0) { - u32 cylinders; - cylinders = geomdata.cyl[0] << 16; - cylinders |= geomdata.cyl[1] << 8; - cylinders |= geomdata.cyl[2]; - if (cylinders && geomdata.heads && - drive->sectors <= 0xFFFFFFFFULL && - ((u32)drive->sectors % (geomdata.heads * cylinders) == 0)) { - drive->pchs.cylinder = cylinders; - drive->pchs.head = geomdata.heads; - drive->pchs.sector = (u32)drive->sectors / (geomdata.heads * cylinders); - } - } - } - - char *desc = znprintf(MAXDESCSIZE, "%s Drive %s %s %s" - , s, vendor, product, rev); - boot_add_hd(drive, desc, prio); - return 0; -} diff --git a/payloads/external/SeaBIOS/src/hw/blockcmd.h b/payloads/external/SeaBIOS/src/hw/blockcmd.h deleted file mode 100644 index f18543ed..00000000 --- a/payloads/external/SeaBIOS/src/hw/blockcmd.h +++ /dev/null @@ -1,114 +0,0 @@ -// Definitions for SCSI style command data blocks. -#ifndef __BLOCKCMD_H -#define __BLOCKCMD_H - -#include "types.h" // u8 - -#define CDB_CMD_READ_10 0x28 -#define CDB_CMD_VERIFY_10 0x2f -#define CDB_CMD_WRITE_10 0x2a - -struct cdb_rwdata_10 { - u8 command; - u8 flags; - u32 lba; - u8 resreved_06; - u16 count; - u8 reserved_09; - u8 pad[6]; -} PACKED; - -#define CDB_CMD_READ_CAPACITY 0x25 - -struct cdb_read_capacity { - u8 command; - u8 flags; - u8 resreved_02[8]; - u8 pad[6]; -} PACKED; - -struct cdbres_read_capacity { - u32 sectors; - u32 blksize; -} PACKED; - -#define CDB_CMD_TEST_UNIT_READY 0x00 -#define CDB_CMD_INQUIRY 0x12 -#define CDB_CMD_REQUEST_SENSE 0x03 - -struct cdb_request_sense { - u8 command; - u8 flags; - u16 reserved_02; - u8 length; - u8 reserved_05; - u8 pad[10]; -} PACKED; - -struct cdbres_request_sense { - u8 errcode; - u8 segment; - u8 flags; - u32 info; - u8 additional; - u32 specific; - u8 asc; - u8 ascq; - u32 reserved_0e; -} PACKED; - -#define SCSI_TYPE_DISK 0x00 -#define SCSI_TYPE_CDROM 0x05 - -struct cdbres_inquiry { - u8 pdt; - u8 removable; - u8 reserved_02[2]; - u8 additional; - u8 reserved_05[3]; - char vendor[8]; - char product[16]; - char rev[4]; -} PACKED; - -#define CDB_CMD_MODE_SENSE 0x5A -#define MODE_PAGE_HD_GEOMETRY 0x04 - -struct cdb_mode_sense { - u8 command; - u8 flags; - u8 page; - u32 reserved_03; - u16 count; - u8 reserved_09; - u8 pad[6]; -} PACKED; - -struct cdbres_mode_sense_geom { - u8 unused_00[3]; - u8 read_only; - u32 unused_04; - u8 page; - u8 length; - u8 cyl[3]; - u8 heads; - u8 precomp[3]; - u8 reduced[3]; - u16 step_rate; - u8 landing[3]; - u16 rpm; -} PACKED; - -// blockcmd.c -struct disk_op_s; -int scsi_fill_cmd(struct disk_op_s *op, void *cdbcmd, int maxcdb); -int scsi_is_read(struct disk_op_s *op); -int scsi_is_ready(struct disk_op_s *op); -struct drive_s; -int scsi_drive_setup(struct drive_s *drive, const char *s, int prio); -typedef int (*scsi_add_lun)(u32 lun, struct drive_s *tmpl_drv); -int scsi_rep_luns_scan(struct drive_s *tmp_drive, scsi_add_lun add_lun); -int scsi_sequential_scan(struct drive_s *tmp_drive, u32 maxluns, - scsi_add_lun add_lun); - -#endif // blockcmd.h diff --git a/payloads/external/SeaBIOS/src/hw/dma.c b/payloads/external/SeaBIOS/src/hw/dma.c deleted file mode 100644 index 20c9fbb7..00000000 --- a/payloads/external/SeaBIOS/src/hw/dma.c +++ /dev/null @@ -1,67 +0,0 @@ -// Code to support legacy Intel 8237 DMA chip. -// -// Copyright (C) 2008,2009 Kevin O'Connor <kevin@koconnor.net> -// Copyright (C) 2002 MandrakeSoft S.A. -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "util.h" // dma_setup -#include "x86.h" // outb - -#define PORT_DMA_ADDR_2 0x0004 -#define PORT_DMA_CNT_2 0x0005 -#define PORT_DMA1_MASK_REG 0x000a -#define PORT_DMA1_MODE_REG 0x000b -#define PORT_DMA1_CLEAR_FF_REG 0x000c -#define PORT_DMA1_MASTER_CLEAR 0x000d -#define PORT_DMA_PAGE_2 0x0081 -#define PORT_DMA2_MASK_REG 0x00d4 -#define PORT_DMA2_MODE_REG 0x00d6 -#define PORT_DMA2_MASTER_CLEAR 0x00da - -// Setup the DMA controller for a floppy transfer. -int -dma_floppy(u32 addr, int count, int isWrite) -{ - // check for 64K boundary overrun - u16 end = count - 1; - u32 last_addr = addr + end; - if ((addr >> 16) != (last_addr >> 16)) - return -1; - - u8 mode_register = 0x46; // single mode, increment, autoinit disable, - if (isWrite) - mode_register = 0x4a; - - outb(0x06, PORT_DMA1_MASK_REG); - outb(0x00, PORT_DMA1_CLEAR_FF_REG); // clear flip-flop - outb(addr, PORT_DMA_ADDR_2); - outb(addr>>8, PORT_DMA_ADDR_2); - outb(0x00, PORT_DMA1_CLEAR_FF_REG); // clear flip-flop - outb(end, PORT_DMA_CNT_2); - outb(end>>8, PORT_DMA_CNT_2); - - // port 0b: DMA-1 Mode Register - // transfer type=write, channel 2 - outb(mode_register, PORT_DMA1_MODE_REG); - - // port 81: DMA-1 Page Register, channel 2 - outb(addr>>16, PORT_DMA_PAGE_2); - - outb(0x02, PORT_DMA1_MASK_REG); // unmask channel 2 - - return 0; -} - -// Reset DMA controller -void -dma_setup(void) -{ - // first reset the DMA controllers - outb(0, PORT_DMA1_MASTER_CLEAR); - outb(0, PORT_DMA2_MASTER_CLEAR); - - // then initialize the DMA controllers - outb(0xc0, PORT_DMA2_MODE_REG); - outb(0x00, PORT_DMA2_MASK_REG); -} diff --git a/payloads/external/SeaBIOS/src/hw/esp-scsi.c b/payloads/external/SeaBIOS/src/hw/esp-scsi.c deleted file mode 100644 index cc25f227..00000000 --- a/payloads/external/SeaBIOS/src/hw/esp-scsi.c +++ /dev/null @@ -1,243 +0,0 @@ -// AMD PCscsi boot support. -// -// Copyright (C) 2012 Red Hat Inc. -// -// Authors: -// Paolo Bonzini <pbonzini@redhat.com> -// -// based on lsi-scsi.c which is written by: -// Gerd Hoffman <kraxel@redhat.com> -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "biosvar.h" // GET_GLOBALFLAT -#include "block.h" // struct drive_s -#include "blockcmd.h" // scsi_drive_setup -#include "config.h" // CONFIG_* -#include "fw/paravirt.h" // runningOnQEMU -#include "malloc.h" // free -#include "output.h" // dprintf -#include "pcidevice.h" // foreachpci -#include "pci_ids.h" // PCI_DEVICE_ID -#include "pci_regs.h" // PCI_VENDOR_ID -#include "stacks.h" // run_thread -#include "std/disk.h" // DISK_RET_SUCCESS -#include "string.h" // memset -#include "util.h" // usleep - -#define ESP_TCLO 0x00 -#define ESP_TCMID 0x04 -#define ESP_FIFO 0x08 -#define ESP_CMD 0x0c -#define ESP_WBUSID 0x10 -#define ESP_TCHI 0x38 - -#define ESP_RSTAT 0x10 -#define ESP_RINTR 0x14 -#define ESP_RFLAGS 0x1c - -#define ESP_DMA_CMD 0x40 -#define ESP_DMA_STC 0x44 -#define ESP_DMA_SPA 0x48 -#define ESP_DMA_WBC 0x4c -#define ESP_DMA_WAC 0x50 -#define ESP_DMA_STAT 0x54 -#define ESP_DMA_SMDLA 0x58 -#define ESP_DMA_WMAC 0x58c - -#define ESP_CMD_DMA 0x80 -#define ESP_CMD_RESET 0x02 -#define ESP_CMD_TI 0x10 -#define ESP_CMD_ICCS 0x11 -#define ESP_CMD_SELATN 0x42 - -#define ESP_STAT_DI 0x01 -#define ESP_STAT_CD 0x02 -#define ESP_STAT_MSG 0x04 -#define ESP_STAT_TC 0x10 - -#define ESP_INTR_DC 0x20 - -struct esp_lun_s { - struct drive_s drive; - struct pci_device *pci; - u32 iobase; - u8 target; - u8 lun; -}; - -static void -esp_scsi_dma(u32 iobase, u32 buf, u32 len, int read) -{ - outb(len & 0xff, iobase + ESP_TCLO); - outb((len >> 8) & 0xff, iobase + ESP_TCMID); - outb((len >> 16) & 0xff, iobase + ESP_TCHI); - outl(buf, iobase + ESP_DMA_SPA); - outl(len, iobase + ESP_DMA_STC); - outb(read ? 0x83 : 0x03, iobase + ESP_DMA_CMD); -} - -int -esp_scsi_process_op(struct disk_op_s *op) -{ - if (!CONFIG_ESP_SCSI) - return DISK_RET_EBADTRACK; - struct esp_lun_s *llun_gf = - container_of(op->drive_fl, struct esp_lun_s, drive); - u16 target = GET_GLOBALFLAT(llun_gf->target); - u16 lun = GET_GLOBALFLAT(llun_gf->lun); - u8 cdbcmd[16]; - int blocksize = scsi_fill_cmd(op, cdbcmd, sizeof(cdbcmd)); - if (blocksize < 0) - return default_process_op(op); - u32 iobase = GET_GLOBALFLAT(llun_gf->iobase); - int i, state; - u8 status; - - outb(target, iobase + ESP_WBUSID); - - /* - * We need to pass the LUN at the beginning of the command, and the FIFO - * is only 16 bytes, so we cannot support 16-byte CDBs. The alternative - * would be to use DMA for the 17-byte command too, which is quite - * overkill. - */ - outb(lun, iobase + ESP_FIFO); - cdbcmd[1] &= 0x1f; - cdbcmd[1] |= lun << 5; - for (i = 0; i < 12; i++) - outb(cdbcmd[i], iobase + ESP_FIFO); - outb(ESP_CMD_SELATN, iobase + ESP_CMD); - - for (state = 0;;) { - u8 stat = inb(iobase + ESP_RSTAT); - - /* Detect disconnected device. */ - if (state == 0 && (inb(iobase + ESP_RINTR) & ESP_INTR_DC)) { - return DISK_RET_ENOTREADY; - } - - /* HBA reads command, clears CD, sets TC -> do DMA if needed. */ - if (state == 0 && (stat & ESP_STAT_TC)) { - state++; - if (op->count && blocksize) { - /* Data phase. */ - u32 count = (u32)op->count * blocksize; - esp_scsi_dma(iobase, (u32)op->buf_fl, count, scsi_is_read(op)); - outb(ESP_CMD_TI | ESP_CMD_DMA, iobase + ESP_CMD); - continue; - } - } - - /* At end of DMA TC is set again -> complete command. */ - if (state == 1 && (stat & ESP_STAT_TC)) { - state++; - outb(ESP_CMD_ICCS, iobase + ESP_CMD); - continue; - } - - /* Finally read data from the message in phase. */ - if (state == 2 && (stat & ESP_STAT_MSG)) { - state++; - status = inb(iobase + ESP_FIFO); - inb(iobase + ESP_FIFO); - break; - } - usleep(5); - } - - if (status == 0) { - return DISK_RET_SUCCESS; - } - - return DISK_RET_EBADTRACK; -} - -static void -esp_scsi_init_lun(struct esp_lun_s *llun, struct pci_device *pci, u32 iobase, - u8 target, u8 lun) -{ - memset(llun, 0, sizeof(*llun)); - llun->drive.type = DTYPE_ESP_SCSI; - llun->drive.cntl_id = pci->bdf; - llun->pci = pci; - llun->target = target; - llun->lun = lun; - llun->iobase = iobase; -} - -static int -esp_scsi_add_lun(u32 lun, struct drive_s *tmpl_drv) -{ - struct esp_lun_s *tmpl_llun = - container_of(tmpl_drv, struct esp_lun_s, drive); - struct esp_lun_s *llun = malloc_fseg(sizeof(*llun)); - if (!llun) { - warn_noalloc(); - return -1; - } - esp_scsi_init_lun(llun, tmpl_llun->pci, tmpl_llun->iobase, - tmpl_llun->target, lun); - - char *name = znprintf(MAXDESCSIZE, "esp %pP %d:%d", - llun->pci, llun->target, llun->lun); - boot_lchs_find_scsi_device(llun->pci, llun->target, llun->lun, - &(llun->drive.lchs)); - int prio = bootprio_find_scsi_device(llun->pci, llun->target, llun->lun); - int ret = scsi_drive_setup(&llun->drive, name, prio); - free(name); - if (ret) - goto fail; - return 0; - -fail: - free(llun); - return -1; -} - -static void -esp_scsi_scan_target(struct pci_device *pci, u32 iobase, u8 target) -{ - struct esp_lun_s llun0; - - esp_scsi_init_lun(&llun0, pci, iobase, target, 0); - - scsi_rep_luns_scan(&llun0.drive, esp_scsi_add_lun); -} - -static void -init_esp_scsi(void *data) -{ - struct pci_device *pci = data; - u32 iobase = pci_enable_iobar(pci, PCI_BASE_ADDRESS_0); - if (!iobase) - return; - pci_enable_busmaster(pci); - - dprintf(1, "found esp at %pP, io @ %x\n", pci, iobase); - - // reset - outb(ESP_CMD_RESET, iobase + ESP_CMD); - - int i; - for (i = 0; i <= 7; i++) - esp_scsi_scan_target(pci, iobase, i); -} - -void -esp_scsi_setup(void) -{ - ASSERT32FLAT(); - if (!CONFIG_ESP_SCSI || !runningOnQEMU()) - return; - - dprintf(3, "init esp\n"); - - struct pci_device *pci; - foreachpci(pci) { - if (pci->vendor != PCI_VENDOR_ID_AMD - || pci->device != PCI_DEVICE_ID_AMD_SCSI) - continue; - run_thread(init_esp_scsi, pci); - } -} diff --git a/payloads/external/SeaBIOS/src/hw/esp-scsi.h b/payloads/external/SeaBIOS/src/hw/esp-scsi.h deleted file mode 100644 index 0616d14b..00000000 --- a/payloads/external/SeaBIOS/src/hw/esp-scsi.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef __ESP_SCSI_H -#define __ESP_SCSI_H - -struct disk_op_s; -int esp_scsi_process_op(struct disk_op_s *op); -void esp_scsi_setup(void); - -#endif /* __ESP_SCSI_H */ diff --git a/payloads/external/SeaBIOS/src/hw/floppy.c b/payloads/external/SeaBIOS/src/hw/floppy.c deleted file mode 100644 index 9e6647d4..00000000 --- a/payloads/external/SeaBIOS/src/hw/floppy.c +++ /dev/null @@ -1,741 +0,0 @@ -// 16bit code to access floppy drives. -// -// Copyright (C) 2008,2009 Kevin O'Connor <kevin@koconnor.net> -// Copyright (C) 2002 MandrakeSoft S.A. -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "biosvar.h" // SET_BDA -#include "block.h" // struct drive_s -#include "bregs.h" // struct bregs -#include "config.h" // CONFIG_FLOPPY -#include "malloc.h" // malloc_fseg -#include "output.h" // dprintf -#include "pcidevice.h" // pci_find_class -#include "pci_ids.h" // PCI_CLASS_BRIDGE_ISA -#include "pic.h" // pic_eoi1 -#include "romfile.h" // romfile_loadint -#include "rtc.h" // rtc_read -#include "stacks.h" // yield -#include "std/disk.h" // DISK_RET_SUCCESS -#include "string.h" // memset -#include "util.h" // timer_calc - -#define PORT_FD_BASE 0x03f0 -#define PORT_FD_DOR 0x03f2 -#define PORT_FD_STATUS 0x03f4 -#define PORT_FD_DATA 0x03f5 -#define PORT_FD_DIR 0x03f7 - -#define FLOPPY_SIZE_CODE 0x02 // 512 byte sectors -#define FLOPPY_DATALEN 0xff // Not used - because size code is 0x02 -#define FLOPPY_MOTOR_TICKS 37 // ~2 seconds -#define FLOPPY_FILLBYTE 0xf6 -#define FLOPPY_GAPLEN 0x1B -#define FLOPPY_FORMAT_GAPLEN 0x6c -#define FLOPPY_PIO_TIMEOUT 1000 -#define FLOPPY_IRQ_TIMEOUT 5000 -#define FLOPPY_SPECIFY1 0xAF // step rate 12ms, head unload 240ms -#define FLOPPY_SPECIFY2 0x02 // head load time 4ms, DMA used -#define FLOPPY_STARTUP_TIME 8 // 1 second - -#define FLOPPY_DOR_MOTOR_D 0x80 // Set to turn drive 3's motor ON -#define FLOPPY_DOR_MOTOR_C 0x40 // Set to turn drive 2's motor ON -#define FLOPPY_DOR_MOTOR_B 0x20 // Set to turn drive 1's motor ON -#define FLOPPY_DOR_MOTOR_A 0x10 // Set to turn drive 0's motor ON -#define FLOPPY_DOR_MOTOR_MASK 0xf0 -#define FLOPPY_DOR_IRQ 0x08 // Set to enable IRQs and DMA -#define FLOPPY_DOR_RESET 0x04 // Clear = enter reset mode, Set = normal operation -#define FLOPPY_DOR_DSEL_MASK 0x03 // "Select" drive number for next access - -// New diskette parameter table adding 3 parameters from IBM -// Since no provisions are made for multiple drive types, most -// values in this table are ignored. I set parameters for 1.44M -// floppy here -struct floppy_ext_dbt_s diskette_param_table2 VARFSEG = { - .dbt = { - .specify1 = FLOPPY_SPECIFY1, - .specify2 = FLOPPY_SPECIFY2, - .shutoff_ticks = FLOPPY_MOTOR_TICKS, // ~2 seconds - .bps_code = FLOPPY_SIZE_CODE, - .sectors = 18, - .interblock_len = FLOPPY_GAPLEN, - .data_len = FLOPPY_DATALEN, - .gap_len = FLOPPY_FORMAT_GAPLEN, - .fill_byte = FLOPPY_FILLBYTE, - .settle_time = 0x0F, // 15ms - .startup_time = FLOPPY_STARTUP_TIME, - }, - .max_track = 79, // maximum track - .data_rate = 0, // data transfer rate - .drive_type = 4, // drive type in cmos -}; - -struct floppyinfo_s { - struct chs_s chs; - u8 floppy_size; - u8 data_rate; -}; - -#define FLOPPY_SIZE_525 0x01 -#define FLOPPY_SIZE_350 0x02 - -#define FLOPPY_RATE_500K 0x00 -#define FLOPPY_RATE_300K 0x01 -#define FLOPPY_RATE_250K 0x02 -#define FLOPPY_RATE_1M 0x03 - -struct floppyinfo_s FloppyInfo[] VARFSEG = { - // Unknown - { {0, 0, 0}, 0x00, 0x00}, - // 1 - 360KB, 5.25" - 2 heads, 40 tracks, 9 sectors - { {2, 40, 9}, FLOPPY_SIZE_525, FLOPPY_RATE_300K}, - // 2 - 1.2MB, 5.25" - 2 heads, 80 tracks, 15 sectors - { {2, 80, 15}, FLOPPY_SIZE_525, FLOPPY_RATE_500K}, - // 3 - 720KB, 3.5" - 2 heads, 80 tracks, 9 sectors - { {2, 80, 9}, FLOPPY_SIZE_350, FLOPPY_RATE_250K}, - // 4 - 1.44MB, 3.5" - 2 heads, 80 tracks, 18 sectors - { {2, 80, 18}, FLOPPY_SIZE_350, FLOPPY_RATE_500K}, - // 5 - 2.88MB, 3.5" - 2 heads, 80 tracks, 36 sectors - { {2, 80, 36}, FLOPPY_SIZE_350, FLOPPY_RATE_1M}, - // 6 - 160k, 5.25" - 1 heads, 40 tracks, 8 sectors - { {1, 40, 8}, FLOPPY_SIZE_525, FLOPPY_RATE_250K}, - // 7 - 180k, 5.25" - 1 heads, 40 tracks, 9 sectors - { {1, 40, 9}, FLOPPY_SIZE_525, FLOPPY_RATE_300K}, - // 8 - 320k, 5.25" - 2 heads, 40 tracks, 8 sectors - { {2, 40, 8}, FLOPPY_SIZE_525, FLOPPY_RATE_250K}, -}; - -struct drive_s * -init_floppy(int floppyid, int ftype) -{ - if (ftype <= 0 || ftype >= ARRAY_SIZE(FloppyInfo)) { - dprintf(1, "Bad floppy type %d\n", ftype); - return NULL; - } - - struct drive_s *drive = malloc_fseg(sizeof(*drive)); - if (!drive) { - warn_noalloc(); - return NULL; - } - memset(drive, 0, sizeof(*drive)); - drive->cntl_id = floppyid; - drive->type = DTYPE_FLOPPY; - drive->blksize = DISK_SECTOR_SIZE; - drive->floppy_type = ftype; - drive->sectors = (u64)-1; - - memcpy(&drive->lchs, &FloppyInfo[ftype].chs - , sizeof(FloppyInfo[ftype].chs)); - return drive; -} - -static void -addFloppy(int floppyid, int ftype) -{ - struct drive_s *drive = init_floppy(floppyid, ftype); - if (!drive) - return; - char *desc = znprintf(MAXDESCSIZE, "Floppy [drive %c]", 'A' + floppyid); - struct pci_device *pci = pci_find_class(PCI_CLASS_BRIDGE_ISA); /* isa-to-pci bridge */ - int prio = bootprio_find_fdc_device(pci, PORT_FD_BASE, floppyid); - boot_add_floppy(drive, desc, prio); -} - -void -floppy_setup(void) -{ - memcpy(&diskette_param_table, &diskette_param_table2 - , sizeof(diskette_param_table)); - SET_IVT(0x1E, SEGOFF(SEG_BIOS - , (u32)&diskette_param_table2 - BUILD_BIOS_ADDR)); - - if (! CONFIG_FLOPPY) - return; - dprintf(3, "init floppy drives\n"); - - if (CONFIG_QEMU) { - u8 type = rtc_read(CMOS_FLOPPY_DRIVE_TYPE); - if (type & 0xf0) - addFloppy(0, type >> 4); - if (type & 0x0f) - addFloppy(1, type & 0x0f); - } else { - u8 type = romfile_loadint("etc/floppy0", 0); - if (type) - addFloppy(0, type); - type = romfile_loadint("etc/floppy1", 0); - if (type) - addFloppy(1, type); - } - - enable_hwirq(6, FUNC16(entry_0e)); -} - -// Find a floppy type that matches a given image size. -int -find_floppy_type(u32 size) -{ - int i; - for (i=1; i<ARRAY_SIZE(FloppyInfo); i++) { - struct chs_s *c = &FloppyInfo[i].chs; - if (c->cylinder * c->head * c->sector * DISK_SECTOR_SIZE == size) - return i; - } - return -1; -} - - -/**************************************************************** - * Low-level floppy IO - ****************************************************************/ - -u8 FloppyDOR VARLOW; - -static inline u8 -floppy_dor_read(void) -{ - return GET_LOW(FloppyDOR); -} - -static inline void -floppy_dor_write(u8 val) -{ - outb(val, PORT_FD_DOR); - SET_LOW(FloppyDOR, val); -} - -static inline void -floppy_dor_mask(u8 off, u8 on) -{ - floppy_dor_write((floppy_dor_read() & ~off) | on); -} - -static void -floppy_disable_controller(void) -{ - dprintf(2, "Floppy_disable_controller\n"); - // Clear the reset bit (enter reset state) and clear 'enable IRQ and DMA' - floppy_dor_mask(FLOPPY_DOR_IRQ | FLOPPY_DOR_RESET, 0); -} - -static int -floppy_wait_irq(void) -{ - u8 frs = GET_BDA(floppy_recalibration_status); - SET_BDA(floppy_recalibration_status, frs & ~FRS_IRQ); - u32 end = timer_calc(FLOPPY_IRQ_TIMEOUT); - for (;;) { - if (timer_check(end)) { - warn_timeout(); - floppy_disable_controller(); - return DISK_RET_ETIMEOUT; - } - frs = GET_BDA(floppy_recalibration_status); - if (frs & FRS_IRQ) - break; - // Could use yield_toirq() here, but that causes issues on - // bochs, so use yield() instead. - yield(); - } - - SET_BDA(floppy_recalibration_status, frs & ~FRS_IRQ); - return DISK_RET_SUCCESS; -} - -// Floppy commands -#define FCF_WAITIRQ 0x10000 -#define FC_CHECKIRQ (0x08 | (0<<8) | (2<<12)) -#define FC_SEEK (0x0f | (2<<8) | (0<<12) | FCF_WAITIRQ) -#define FC_RECALIBRATE (0x07 | (1<<8) | (0<<12) | FCF_WAITIRQ) -#define FC_READID (0x4a | (1<<8) | (7<<12) | FCF_WAITIRQ) -#define FC_READ (0xe6 | (8<<8) | (7<<12) | FCF_WAITIRQ) -#define FC_WRITE (0xc5 | (8<<8) | (7<<12) | FCF_WAITIRQ) -#define FC_FORMAT (0x4d | (5<<8) | (7<<12) | FCF_WAITIRQ) -#define FC_SPECIFY (0x03 | (2<<8) | (0<<12)) - -// Send the specified command and it's parameters to the floppy controller. -static int -floppy_pio(int command, u8 *param) -{ - dprintf(9, "Floppy pio command %x\n", command); - // Send command and parameters to controller. - u32 end = timer_calc(FLOPPY_PIO_TIMEOUT); - int send = (command >> 8) & 0xf; - int i = 0; - for (;;) { - u8 sts = inb(PORT_FD_STATUS); - if (!(sts & 0x80)) { - if (timer_check(end)) { - warn_timeout(); - floppy_disable_controller(); - return DISK_RET_ETIMEOUT; - } - yield(); - continue; - } - if (sts & 0x40) { - floppy_disable_controller(); - return DISK_RET_ECONTROLLER; - } - if (i == 0) - outb(command & 0xff, PORT_FD_DATA); - else - outb(param[i-1], PORT_FD_DATA); - if (i++ >= send) - break; - } - - // Wait for command to complete. - if (command & FCF_WAITIRQ) { - int ret = floppy_wait_irq(); - if (ret) - return ret; - } - - // Read response from controller. - end = timer_calc(FLOPPY_PIO_TIMEOUT); - int receive = (command >> 12) & 0xf; - i = 0; - for (;;) { - u8 sts = inb(PORT_FD_STATUS); - if (!(sts & 0x80)) { - if (timer_check(end)) { - warn_timeout(); - floppy_disable_controller(); - return DISK_RET_ETIMEOUT; - } - yield(); - continue; - } - if (i >= receive) { - if (sts & 0x40) { - floppy_disable_controller(); - return DISK_RET_ECONTROLLER; - } - break; - } - if (!(sts & 0x40)) { - floppy_disable_controller(); - return DISK_RET_ECONTROLLER; - } - param[i++] = inb(PORT_FD_DATA); - } - - return DISK_RET_SUCCESS; -} - -static int -floppy_enable_controller(void) -{ - dprintf(2, "Floppy_enable_controller\n"); - // Clear the reset bit (enter reset state), but set 'enable IRQ and DMA' - floppy_dor_mask(FLOPPY_DOR_RESET, FLOPPY_DOR_IRQ); - // Real hardware needs a 4 microsecond delay - usleep(4); - // Set the reset bit (normal operation) and keep 'enable IRQ and DMA' on - floppy_dor_mask(0, FLOPPY_DOR_IRQ | FLOPPY_DOR_RESET); - int ret = floppy_wait_irq(); - if (ret) - return ret; - - // After the interrupt is received, send 4 SENSE INTERRUPT commands to - // clear the interrupt status for each of the four logical drives, - // supported by the controller. - // See section 7.4 - "Drive Polling" of the Intel 82077AA datasheet for - // a more detailed description of why this voodoo needs to be done. - // Without this, initialization fails on real controllers (but still works - // in QEMU) - u8 param[2]; - int i; - for (i=0; i<4; i++) { - ret = floppy_pio(FC_CHECKIRQ, param); - if (ret) - return ret; - } - return DISK_RET_SUCCESS; -} - -// Activate a drive and send a command to it. -static int -floppy_drive_pio(u8 floppyid, int command, u8 *param) -{ - // Enable controller if it isn't running. - if (!(floppy_dor_read() & FLOPPY_DOR_RESET)) { - int ret = floppy_enable_controller(); - if (ret) - return ret; - } - - // set the disk motor timeout value of INT 08 to the highest value - SET_BDA(floppy_motor_counter, 255); - - // Check if the motor is already running - u8 motor_mask = FLOPPY_DOR_MOTOR_A << floppyid; - int motor_already_running = floppy_dor_read() & motor_mask; - - // Turn on motor of selected drive, DMA & int enabled, normal operation - floppy_dor_write(motor_mask | FLOPPY_DOR_IRQ | FLOPPY_DOR_RESET | floppyid); - - // If the motor was just started, wait for it to get up to speed - if (!motor_already_running && !CONFIG_QEMU) - msleep(FLOPPY_STARTUP_TIME * 125); - - // Send command. - int ret = floppy_pio(command, param); - SET_BDA(floppy_motor_counter, FLOPPY_MOTOR_TICKS); // reset motor timeout - if (ret) - return ret; - - // Check IRQ command is needed after irq commands with no results - if ((command & FCF_WAITIRQ) && ((command >> 12) & 0xf) == 0) - return floppy_pio(FC_CHECKIRQ, param); - return DISK_RET_SUCCESS; -} - - -/**************************************************************** - * Floppy media sense and seeking - ****************************************************************/ - -static int -floppy_drive_recal(u8 floppyid) -{ - dprintf(2, "Floppy_drive_recal %d\n", floppyid); - // send Recalibrate command to controller - u8 param[2]; - param[0] = floppyid; - int ret = floppy_drive_pio(floppyid, FC_RECALIBRATE, param); - if (ret) - return ret; - - u8 frs = GET_BDA(floppy_recalibration_status); - SET_BDA(floppy_recalibration_status, frs | (1<<floppyid)); - SET_BDA(floppy_track[floppyid], 0); - return DISK_RET_SUCCESS; -} - -static int -floppy_drive_specify(void) -{ - u8 param[2]; - param[0] = FLOPPY_SPECIFY1; - param[1] = FLOPPY_SPECIFY2; - return floppy_pio(FC_SPECIFY, param); -} - -static int -floppy_drive_readid(u8 floppyid, u8 data_rate, u8 head) -{ - // Set data rate. - outb(data_rate, PORT_FD_DIR); - - // send Read Sector Id command - u8 param[7]; - param[0] = (head << 2) | floppyid; // HD DR1 DR2 - int ret = floppy_drive_pio(floppyid, FC_READID, param); - if (ret) - return ret; - if (param[0] & 0xc0) - return -1; - return 0; -} - -static int -floppy_media_sense(struct drive_s *drive_gf) -{ - u8 ftype = GET_GLOBALFLAT(drive_gf->floppy_type), stype = ftype; - u8 floppyid = GET_GLOBALFLAT(drive_gf->cntl_id); - - u8 data_rate = GET_GLOBAL(FloppyInfo[stype].data_rate); - int ret = floppy_drive_readid(floppyid, data_rate, 0); - if (ret) { - // Attempt media sense. - for (stype=1; ; stype++) { - if (stype >= ARRAY_SIZE(FloppyInfo)) - return DISK_RET_EMEDIA; - if (stype==ftype - || (GET_GLOBAL(FloppyInfo[stype].floppy_size) - != GET_GLOBAL(FloppyInfo[ftype].floppy_size)) - || (GET_GLOBAL(FloppyInfo[stype].chs.head) - > GET_GLOBAL(FloppyInfo[ftype].chs.head)) - || (GET_GLOBAL(FloppyInfo[stype].chs.cylinder) - > GET_GLOBAL(FloppyInfo[ftype].chs.cylinder)) - || (GET_GLOBAL(FloppyInfo[stype].chs.sector) - > GET_GLOBAL(FloppyInfo[ftype].chs.sector))) - continue; - data_rate = GET_GLOBAL(FloppyInfo[stype].data_rate); - ret = floppy_drive_readid(floppyid, data_rate, 0); - if (!ret) - break; - } - } - dprintf(2, "Floppy_media_sense on drive %d found rate %d\n" - , floppyid, data_rate); - - u8 old_data_rate = GET_BDA(floppy_media_state[floppyid]) >> 6; - SET_BDA(floppy_last_data_rate, (old_data_rate<<2) | (data_rate<<6)); - u8 media = (stype == 1 ? 0x04 : (stype == 2 ? 0x05 : 0x07)); - u8 fms = (data_rate<<6) | FMS_MEDIA_DRIVE_ESTABLISHED | media; - if (GET_GLOBAL(FloppyInfo[stype].chs.cylinder) - < GET_GLOBAL(FloppyInfo[ftype].chs.cylinder)) - fms |= FMS_DOUBLE_STEPPING; - SET_BDA(floppy_media_state[floppyid], fms); - - return DISK_RET_SUCCESS; -} - -// Prepare a floppy for a data transfer. -static int -floppy_prep(struct drive_s *drive_gf, u8 cylinder) -{ - u8 floppyid = GET_GLOBALFLAT(drive_gf->cntl_id); - if (!(GET_BDA(floppy_recalibration_status) & (1<<floppyid)) || - !(GET_BDA(floppy_media_state[floppyid]) & FMS_MEDIA_DRIVE_ESTABLISHED)) { - // Recalibrate drive. - int ret = floppy_drive_recal(floppyid); - if (ret) - return ret; - - // Sense media. - ret = floppy_media_sense(drive_gf); - if (ret) - return ret; - - // Execute a SPECIFY command (sets the Step Rate Time, - // Head Load Time, Head Unload Time and the DMA enable/disable bit). - ret = floppy_drive_specify(); - if (ret) - return ret; - } - - // Seek to cylinder if needed. - u8 lastcyl = GET_BDA(floppy_track[floppyid]); - if (cylinder != lastcyl) { - u8 param[2]; - param[0] = floppyid; - param[1] = cylinder; - int ret = floppy_drive_pio(floppyid, FC_SEEK, param); - if (ret) - return ret; - SET_BDA(floppy_track[floppyid], cylinder); - } - - return DISK_RET_SUCCESS; -} - - -/**************************************************************** - * Floppy DMA transfer - ****************************************************************/ - -// Perform a floppy transfer command (setup DMA and issue PIO). -static int -floppy_dma_cmd(struct disk_op_s *op, int count, int command, u8 *param) -{ - // Setup DMA controller - int isWrite = command != FC_READ; - int ret = dma_floppy((u32)op->buf_fl, count, isWrite); - if (ret) - return DISK_RET_EBOUNDARY; - - // Invoke floppy controller - u8 floppyid = GET_GLOBALFLAT(op->drive_fl->cntl_id); - ret = floppy_drive_pio(floppyid, command, param); - if (ret) - return ret; - - // Populate floppy_return_status in BDA - int i; - for (i=0; i<7; i++) - SET_BDA(floppy_return_status[i], param[i]); - - if (param[0] & 0xc0) { - if (param[1] & 0x02) - return DISK_RET_EWRITEPROTECT; - dprintf(1, "floppy error: %02x %02x %02x %02x %02x %02x %02x\n" - , param[0], param[1], param[2], param[3] - , param[4], param[5], param[6]); - return DISK_RET_ECONTROLLER; - } - - return DISK_RET_SUCCESS; -} - - -/**************************************************************** - * Floppy handlers - ****************************************************************/ - -static struct chs_s -lba2chs(struct disk_op_s *op) -{ - struct chs_s res = { }; - - u32 tmp = op->lba; - u16 nls = GET_GLOBALFLAT(op->drive_fl->lchs.sector); - res.sector = (tmp % nls) + 1; - - tmp /= nls; - u16 nlh = GET_GLOBALFLAT(op->drive_fl->lchs.head); - res.head = tmp % nlh; - - tmp /= nlh; - res.cylinder = tmp; - - return res; -} - -// diskette controller reset -static int -floppy_reset(struct disk_op_s *op) -{ - SET_BDA(floppy_recalibration_status, 0); - SET_BDA(floppy_media_state[0], 0); - SET_BDA(floppy_media_state[1], 0); - SET_BDA(floppy_track[0], 0); - SET_BDA(floppy_track[1], 0); - SET_BDA(floppy_last_data_rate, 0); - floppy_disable_controller(); - return floppy_enable_controller(); -} - -// Read Diskette Sectors -static int -floppy_read(struct disk_op_s *op) -{ - struct chs_s chs = lba2chs(op); - int ret = floppy_prep(op->drive_fl, chs.cylinder); - if (ret) - return ret; - - // send read-normal-data command to controller - u8 floppyid = GET_GLOBALFLAT(op->drive_fl->cntl_id); - u8 param[8]; - param[0] = (chs.head << 2) | floppyid; // HD DR1 DR2 - param[1] = chs.cylinder; - param[2] = chs.head; - param[3] = chs.sector; - param[4] = FLOPPY_SIZE_CODE; - param[5] = chs.sector + op->count - 1; // last sector to read on track - param[6] = FLOPPY_GAPLEN; - param[7] = FLOPPY_DATALEN; - return floppy_dma_cmd(op, op->count * DISK_SECTOR_SIZE, FC_READ, param); -} - -// Write Diskette Sectors -static int -floppy_write(struct disk_op_s *op) -{ - struct chs_s chs = lba2chs(op); - int ret = floppy_prep(op->drive_fl, chs.cylinder); - if (ret) - return ret; - - // send write-normal-data command to controller - u8 floppyid = GET_GLOBALFLAT(op->drive_fl->cntl_id); - u8 param[8]; - param[0] = (chs.head << 2) | floppyid; // HD DR1 DR2 - param[1] = chs.cylinder; - param[2] = chs.head; - param[3] = chs.sector; - param[4] = FLOPPY_SIZE_CODE; - param[5] = chs.sector + op->count - 1; // last sector to write on track - param[6] = FLOPPY_GAPLEN; - param[7] = FLOPPY_DATALEN; - return floppy_dma_cmd(op, op->count * DISK_SECTOR_SIZE, FC_WRITE, param); -} - -// Verify Diskette Sectors -static int -floppy_verify(struct disk_op_s *op) -{ - struct chs_s chs = lba2chs(op); - int ret = floppy_prep(op->drive_fl, chs.cylinder); - if (ret) - return ret; - - // This command isn't implemented - just return success. - return DISK_RET_SUCCESS; -} - -// format diskette track -static int -floppy_format(struct disk_op_s *op) -{ - struct chs_s chs = lba2chs(op); - int ret = floppy_prep(op->drive_fl, chs.cylinder); - if (ret) - return ret; - - // send format-track command to controller - u8 floppyid = GET_GLOBALFLAT(op->drive_fl->cntl_id); - u8 param[7]; - param[0] = (chs.head << 2) | floppyid; // HD DR1 DR2 - param[1] = FLOPPY_SIZE_CODE; - param[2] = op->count; // number of sectors per track - param[3] = FLOPPY_FORMAT_GAPLEN; - param[4] = FLOPPY_FILLBYTE; - return floppy_dma_cmd(op, op->count * 4, FC_FORMAT, param); -} - -int -floppy_process_op(struct disk_op_s *op) -{ - if (!CONFIG_FLOPPY) - return 0; - - switch (op->command) { - case CMD_RESET: - return floppy_reset(op); - case CMD_READ: - return floppy_read(op); - case CMD_WRITE: - return floppy_write(op); - case CMD_VERIFY: - return floppy_verify(op); - case CMD_FORMAT: - return floppy_format(op); - default: - return DISK_RET_EPARAM; - } -} - - -/**************************************************************** - * HW irqs - ****************************************************************/ - -// INT 0Eh Diskette Hardware ISR Entry Point -void VISIBLE16 -handle_0e(void) -{ - if (! CONFIG_FLOPPY) - return; - debug_isr(DEBUG_ISR_0e); - - // diskette interrupt has occurred - u8 frs = GET_BDA(floppy_recalibration_status); - SET_BDA(floppy_recalibration_status, frs | FRS_IRQ); - - pic_eoi1(); -} - -// Called from int08 handler. -void -floppy_tick(void) -{ - if (! CONFIG_FLOPPY) - return; - - // time to turn off drive(s)? - u8 fcount = GET_BDA(floppy_motor_counter); - if (fcount) { - fcount--; - SET_BDA(floppy_motor_counter, fcount); - if (fcount == 0) - // turn motor(s) off - floppy_dor_mask(FLOPPY_DOR_MOTOR_MASK, 0); - } -} diff --git a/payloads/external/SeaBIOS/src/hw/lsi-scsi.c b/payloads/external/SeaBIOS/src/hw/lsi-scsi.c deleted file mode 100644 index cbaa2acd..00000000 --- a/payloads/external/SeaBIOS/src/hw/lsi-scsi.c +++ /dev/null @@ -1,223 +0,0 @@ -// (qemu-emulated) lsi53c895a boot support. -// -// Copyright (C) 2012 Red Hat Inc. -// -// Authors: -// Gerd Hoffmann <kraxel@redhat.com> -// -// based on virtio-scsi.c which is written by: -// Paolo Bonzini <pbonzini@redhat.com> -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "biosvar.h" // GET_GLOBALFLAT -#include "block.h" // struct drive_s -#include "blockcmd.h" // scsi_drive_setup -#include "config.h" // CONFIG_* -#include "fw/paravirt.h" // runningOnQEMU -#include "malloc.h" // free -#include "output.h" // dprintf -#include "pcidevice.h" // foreachpci -#include "pci_ids.h" // PCI_DEVICE_ID_VIRTIO_BLK -#include "pci_regs.h" // PCI_VENDOR_ID -#include "stacks.h" // run_thread -#include "std/disk.h" // DISK_RET_SUCCESS -#include "string.h" // memset -#include "util.h" // usleep - -#define LSI_REG_DSTAT 0x0c -#define LSI_REG_ISTAT0 0x14 -#define LSI_REG_DSP0 0x2c -#define LSI_REG_DSP1 0x2d -#define LSI_REG_DSP2 0x2e -#define LSI_REG_DSP3 0x2f -#define LSI_REG_SIST0 0x42 -#define LSI_REG_SIST1 0x43 - -#define LSI_ISTAT0_DIP 0x01 -#define LSI_ISTAT0_SIP 0x02 -#define LSI_ISTAT0_INTF 0x04 -#define LSI_ISTAT0_CON 0x08 -#define LSI_ISTAT0_SEM 0x10 -#define LSI_ISTAT0_SIGP 0x20 -#define LSI_ISTAT0_SRST 0x40 -#define LSI_ISTAT0_ABRT 0x80 - -struct lsi_lun_s { - struct drive_s drive; - struct pci_device *pci; - u32 iobase; - u8 target; - u8 lun; -}; - -int -lsi_scsi_process_op(struct disk_op_s *op) -{ - if (!CONFIG_LSI_SCSI) - return DISK_RET_EBADTRACK; - struct lsi_lun_s *llun_gf = - container_of(op->drive_fl, struct lsi_lun_s, drive); - u16 target = GET_GLOBALFLAT(llun_gf->target); - u16 lun = GET_GLOBALFLAT(llun_gf->lun); - u8 cdbcmd[16]; - int blocksize = scsi_fill_cmd(op, cdbcmd, sizeof(cdbcmd)); - if (blocksize < 0) - return default_process_op(op); - u32 iobase = GET_GLOBALFLAT(llun_gf->iobase); - u32 dma = ((scsi_is_read(op) ? 0x01000000 : 0x00000000) | - (op->count * blocksize)); - u8 msgout[] = { - 0x80 | lun, // select lun - 0x08, - }; - u8 status = 0xff; - u8 msgin_tmp[2]; - u8 msgin = 0xff; - - u32 script[] = { - /* select target, send scsi command */ - 0x40000000 | target << 16, // select target - 0x00000000, - 0x06000001, // msgout - (u32)MAKE_FLATPTR(GET_SEG(SS), &msgout), - 0x02000010, // scsi command - (u32)MAKE_FLATPTR(GET_SEG(SS), cdbcmd), - - /* handle disconnect */ - 0x87820000, // phase == msgin ? - 0x00000018, - 0x07000002, // msgin - (u32)MAKE_FLATPTR(GET_SEG(SS), &msgin_tmp), - 0x50000000, // re-select - 0x00000000, - 0x07000002, // msgin - (u32)MAKE_FLATPTR(GET_SEG(SS), &msgin_tmp), - - /* dma data, get status, raise irq */ - dma, // dma data - (u32)op->buf_fl, - 0x03000001, // status - (u32)MAKE_FLATPTR(GET_SEG(SS), &status), - 0x07000001, // msgin - (u32)MAKE_FLATPTR(GET_SEG(SS), &msgin), - 0x98080000, // dma irq - 0x00000000, - }; - u32 dsp = (u32)MAKE_FLATPTR(GET_SEG(SS), &script); - - outb(dsp & 0xff, iobase + LSI_REG_DSP0); - outb((dsp >> 8) & 0xff, iobase + LSI_REG_DSP1); - outb((dsp >> 16) & 0xff, iobase + LSI_REG_DSP2); - outb((dsp >> 24) & 0xff, iobase + LSI_REG_DSP3); - - for (;;) { - u8 dstat = inb(iobase + LSI_REG_DSTAT); - u8 sist0 = inb(iobase + LSI_REG_SIST0); - u8 sist1 = inb(iobase + LSI_REG_SIST1); - if (sist0 || sist1) { - goto fail; - } - if (dstat & 0x04) { - break; - } - usleep(5); - } - - if (msgin == 0 && status == 0) { - return DISK_RET_SUCCESS; - } - -fail: - return DISK_RET_EBADTRACK; -} - -static void -lsi_scsi_init_lun(struct lsi_lun_s *llun, struct pci_device *pci, u32 iobase, - u8 target, u8 lun) -{ - memset(llun, 0, sizeof(*llun)); - llun->drive.type = DTYPE_LSI_SCSI; - llun->drive.cntl_id = pci->bdf; - llun->pci = pci; - llun->target = target; - llun->lun = lun; - llun->iobase = iobase; -} - -static int -lsi_scsi_add_lun(u32 lun, struct drive_s *tmpl_drv) -{ - struct lsi_lun_s *tmpl_llun = - container_of(tmpl_drv, struct lsi_lun_s, drive); - struct lsi_lun_s *llun = malloc_fseg(sizeof(*llun)); - if (!llun) { - warn_noalloc(); - return -1; - } - lsi_scsi_init_lun(llun, tmpl_llun->pci, tmpl_llun->iobase, - tmpl_llun->target, lun); - - boot_lchs_find_scsi_device(llun->pci, llun->target, llun->lun, - &(llun->drive.lchs)); - char *name = znprintf(MAXDESCSIZE, "lsi %pP %d:%d", - llun->pci, llun->target, llun->lun); - int prio = bootprio_find_scsi_device(llun->pci, llun->target, llun->lun); - int ret = scsi_drive_setup(&llun->drive, name, prio); - free(name); - if (ret) - goto fail; - return 0; - -fail: - free(llun); - return -1; -} - -static void -lsi_scsi_scan_target(struct pci_device *pci, u32 iobase, u8 target) -{ - struct lsi_lun_s llun0; - - lsi_scsi_init_lun(&llun0, pci, iobase, target, 0); - - if (scsi_rep_luns_scan(&llun0.drive, lsi_scsi_add_lun) < 0) - scsi_sequential_scan(&llun0.drive, 8, lsi_scsi_add_lun); -} - -static void -init_lsi_scsi(void *data) -{ - struct pci_device *pci = data; - u32 iobase = pci_enable_iobar(pci, PCI_BASE_ADDRESS_0); - if (!iobase) - return; - pci_enable_busmaster(pci); - - dprintf(1, "found lsi53c895a at %pP, io @ %x\n", pci, iobase); - - // reset - outb(LSI_ISTAT0_SRST, iobase + LSI_REG_ISTAT0); - - int i; - for (i = 0; i < 7; i++) - lsi_scsi_scan_target(pci, iobase, i); -} - -void -lsi_scsi_setup(void) -{ - ASSERT32FLAT(); - if (!CONFIG_LSI_SCSI || !runningOnQEMU()) - return; - - dprintf(3, "init lsi53c895a\n"); - - struct pci_device *pci; - foreachpci(pci) { - if (pci->vendor != PCI_VENDOR_ID_LSI_LOGIC - || pci->device != PCI_DEVICE_ID_LSI_53C895A) - continue; - run_thread(init_lsi_scsi, pci); - } -} diff --git a/payloads/external/SeaBIOS/src/hw/lsi-scsi.h b/payloads/external/SeaBIOS/src/hw/lsi-scsi.h deleted file mode 100644 index 6baf4a16..00000000 --- a/payloads/external/SeaBIOS/src/hw/lsi-scsi.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef __LSI_SCSI_H -#define __LSI_SCSI_H - -struct disk_op_s; -int lsi_scsi_process_op(struct disk_op_s *op); -void lsi_scsi_setup(void); - -#endif /* __LSI_SCSI_H */ diff --git a/payloads/external/SeaBIOS/src/hw/megasas.c b/payloads/external/SeaBIOS/src/hw/megasas.c deleted file mode 100644 index 87b8beec..00000000 --- a/payloads/external/SeaBIOS/src/hw/megasas.c +++ /dev/null @@ -1,406 +0,0 @@ -// MegaRAID SAS boot support. -// -// Copyright (C) 2012 Hannes Reinecke, SUSE Linux Products GmbH -// -// Authors: -// Hannes Reinecke <hare@suse.de> -// -// based on virtio-scsi.c which is written by: -// Paolo Bonzini <pbonzini@redhat.com> -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "biosvar.h" // GET_GLOBALFLAT -#include "block.h" // struct drive_s -#include "blockcmd.h" // scsi_drive_setup -#include "config.h" // CONFIG_* -#include "malloc.h" // free -#include "output.h" // dprintf -#include "pci.h" // pci_config_readl -#include "pcidevice.h" // foreachpci -#include "pci_ids.h" // PCI_DEVICE_ID_XXX -#include "pci_regs.h" // PCI_VENDOR_ID -#include "stacks.h" // yield -#include "std/disk.h" // DISK_RET_SUCCESS -#include "string.h" // memset -#include "util.h" // timer_calc - -#define MFI_DB 0x0 // Doorbell -#define MFI_OMSG0 0x18 // Outbound message 0 -#define MFI_IDB 0x20 // Inbound doorbell -#define MFI_ODB 0x2c // Outbound doorbell -#define MFI_IQP 0x40 // Inbound queue port -#define MFI_OSP0 0xb0 // Outbound scratch pad0 -#define MFI_IQPL 0xc0 // Inbound queue port (low bytes) -#define MFI_IQPH 0xc4 // Inbound queue port (high bytes) - -#define MFI_STATE_MASK 0xf0000000 -#define MFI_STATE_WAIT_HANDSHAKE 0x60000000 -#define MFI_STATE_BOOT_MESSAGE_PENDING 0x90000000 -#define MFI_STATE_READY 0xb0000000 -#define MFI_STATE_OPERATIONAL 0xc0000000 -#define MFI_STATE_FAULT 0xf0000000 - -/* MFI Commands */ -typedef enum { - MFI_CMD_INIT = 0x00, - MFI_CMD_LD_READ, - MFI_CMD_LD_WRITE, - MFI_CMD_LD_SCSI_IO, - MFI_CMD_PD_SCSI_IO, - MFI_CMD_DCMD, - MFI_CMD_ABORT, - MFI_CMD_SMP, - MFI_CMD_STP -} mfi_cmd_t; - -struct megasas_cmd_frame { - u8 cmd; /*00h */ - u8 sense_len; /*01h */ - u8 cmd_status; /*02h */ - u8 scsi_status; /*03h */ - - u8 target_id; /*04h */ - u8 lun; /*05h */ - u8 cdb_len; /*06h */ - u8 sge_count; /*07h */ - - u32 context; /*08h */ - u32 context_64; /*0Ch */ - - u16 flags; /*10h */ - u16 timeout; /*12h */ - u32 data_xfer_len; /*14h */ - - union { - struct { - u32 opcode; /*18h */ - u8 mbox[12]; /*1Ch */ - u32 sgl_addr; /*28h */ - u32 sgl_len; /*32h */ - u32 pad; /*34h */ - } dcmd; - struct { - u32 sense_buf_lo; /*18h */ - u32 sense_buf_hi; /*1Ch */ - u8 cdb[16]; /*20h */ - u32 sgl_addr; /*30h */ - u32 sgl_len; /*34h */ - } pthru; - struct { - u8 pad[22]; /*18h */ - } gen; - }; -} __attribute__ ((packed)); - -struct mfi_ld_list_s { - u32 count; - u32 reserved_0; - struct { - u8 target; - u8 lun; - u16 seq; - u8 state; - u8 reserved_1[3]; - u64 size; - } lds[64]; -} __attribute__ ((packed)); - -#define MEGASAS_POLL_TIMEOUT 60000 // 60 seconds polling timeout - -struct megasas_lun_s { - struct drive_s drive; - struct megasas_cmd_frame *frame; - u32 iobase; - u16 pci_id; - u8 target; - u8 lun; -}; - -static int megasas_fire_cmd(u16 pci_id, u32 ioaddr, - struct megasas_cmd_frame *frame) -{ - u32 frame_addr = (u32)frame; - int frame_count = 1; - u8 cmd_state; - - dprintf(2, "Frame 0x%x\n", frame_addr); - if (pci_id == PCI_DEVICE_ID_LSI_SAS2004 || - pci_id == PCI_DEVICE_ID_LSI_SAS2008) { - outl(0, ioaddr + MFI_IQPH); - outl(frame_addr | frame_count << 1 | 1, ioaddr + MFI_IQPL); - } else if (pci_id == PCI_DEVICE_ID_DELL_PERC5 || - pci_id == PCI_DEVICE_ID_LSI_SAS1064R || - pci_id == PCI_DEVICE_ID_LSI_VERDE_ZCR) { - outl(frame_addr >> 3 | frame_count, ioaddr + MFI_IQP); - } else { - outl(frame_addr | frame_count << 1 | 1, ioaddr + MFI_IQP); - } - - u32 end = timer_calc(MEGASAS_POLL_TIMEOUT); - do { - for (;;) { - cmd_state = GET_LOWFLAT(frame->cmd_status); - if (cmd_state != 0xff) - break; - if (timer_check(end)) { - warn_timeout(); - return -1; - } - yield(); - } - } while (cmd_state == 0xff); - - if (cmd_state == 0 || cmd_state == 0x2d) - return 0; - dprintf(1, "ERROR: Frame 0x%x, status 0x%x\n", frame_addr, cmd_state); - return -1; -} - -int -megasas_process_op(struct disk_op_s *op) -{ - if (!CONFIG_MEGASAS) - return DISK_RET_EBADTRACK; - u8 cdb[16]; - int blocksize = scsi_fill_cmd(op, cdb, sizeof(cdb)); - if (blocksize < 0) - return default_process_op(op); - struct megasas_lun_s *mlun_gf = - container_of(op->drive_fl, struct megasas_lun_s, drive); - struct megasas_cmd_frame *frame = GET_GLOBALFLAT(mlun_gf->frame); - u16 pci_id = GET_GLOBALFLAT(mlun_gf->pci_id); - int i; - - memset_fl(frame, 0, sizeof(*frame)); - SET_LOWFLAT(frame->cmd, MFI_CMD_LD_SCSI_IO); - SET_LOWFLAT(frame->cmd_status, 0xFF); - SET_LOWFLAT(frame->target_id, GET_GLOBALFLAT(mlun_gf->target)); - SET_LOWFLAT(frame->lun, GET_GLOBALFLAT(mlun_gf->lun)); - SET_LOWFLAT(frame->flags, 0x0001); - SET_LOWFLAT(frame->data_xfer_len, op->count * blocksize); - SET_LOWFLAT(frame->cdb_len, 16); - - for (i = 0; i < 16; i++) { - SET_LOWFLAT(frame->pthru.cdb[i], cdb[i]); - } - dprintf(2, "pthru cmd 0x%x count %d bs %d\n", - cdb[0], op->count, blocksize); - - if (op->count) { - SET_LOWFLAT(frame->pthru.sgl_addr, (u32)op->buf_fl); - SET_LOWFLAT(frame->pthru.sgl_len, op->count * blocksize); - SET_LOWFLAT(frame->sge_count, 1); - } - SET_LOWFLAT(frame->context, (u32)frame); - - if (megasas_fire_cmd(pci_id, GET_GLOBALFLAT(mlun_gf->iobase), frame) == 0) - return DISK_RET_SUCCESS; - - dprintf(2, "pthru cmd 0x%x failed\n", cdb[0]); - return DISK_RET_EBADTRACK; -} - -static int -megasas_add_lun(struct pci_device *pci, u32 iobase, u8 target, u8 lun) -{ - struct megasas_lun_s *mlun = malloc_fseg(sizeof(*mlun)); - char *name; - int prio, ret = 0; - - if (!mlun) { - warn_noalloc(); - return -1; - } - memset(mlun, 0, sizeof(*mlun)); - mlun->drive.type = DTYPE_MEGASAS; - mlun->drive.cntl_id = pci->bdf; - mlun->pci_id = pci->device; - mlun->target = target; - mlun->lun = lun; - mlun->iobase = iobase; - mlun->frame = memalign_low(256, sizeof(struct megasas_cmd_frame)); - if (!mlun->frame) { - warn_noalloc(); - free(mlun); - return -1; - } - boot_lchs_find_scsi_device(pci, target, lun, &(mlun->drive.lchs)); - name = znprintf(MAXDESCSIZE, "MegaRAID SAS (PCI %pP) LD %d:%d" - , pci, target, lun); - prio = bootprio_find_scsi_device(pci, target, lun); - ret = scsi_drive_setup(&mlun->drive, name, prio); - free(name); - if (ret) { - free(mlun->frame); - free(mlun); - ret = -1; - } - - return ret; -} - -static void megasas_scan_target(struct pci_device *pci, u32 iobase) -{ - struct mfi_ld_list_s ld_list; - struct megasas_cmd_frame *frame = memalign_tmp(256, sizeof(*frame)); - if (!frame) { - warn_noalloc(); - return; - } - - memset(&ld_list, 0, sizeof(ld_list)); - memset_fl(frame, 0, sizeof(*frame)); - - frame->cmd = MFI_CMD_DCMD; - frame->cmd_status = 0xFF; - frame->sge_count = 1; - frame->flags = 0x0011; - frame->data_xfer_len = sizeof(ld_list); - frame->dcmd.opcode = 0x03010000; - frame->dcmd.sgl_addr = (u32)MAKE_FLATPTR(GET_SEG(SS), &ld_list); - frame->dcmd.sgl_len = sizeof(ld_list); - frame->context = (u32)frame; - - if (megasas_fire_cmd(pci->device, iobase, frame) == 0) { - dprintf(2, "%d LD found\n", ld_list.count); - int i; - for (i = 0; i < ld_list.count; i++) { - dprintf(2, "LD %d:%d state 0x%x\n", - ld_list.lds[i].target, ld_list.lds[i].lun, - ld_list.lds[i].state); - if (ld_list.lds[i].state != 0) { - megasas_add_lun(pci, iobase, - ld_list.lds[i].target, ld_list.lds[i].lun); - } - } - } -} - -static int megasas_transition_to_ready(struct pci_device *pci, u32 ioaddr) -{ - u32 fw_state = 0, new_state, mfi_flags = 0; - - if (pci->device == PCI_DEVICE_ID_LSI_SAS1064R || - pci->device == PCI_DEVICE_ID_DELL_PERC5) - new_state = inl(ioaddr + MFI_OMSG0) & MFI_STATE_MASK; - else - new_state = inl(ioaddr + MFI_OSP0) & MFI_STATE_MASK; - - while (fw_state != new_state) { - switch (new_state) { - case MFI_STATE_FAULT: - dprintf(1, "ERROR: fw in fault state\n"); - return -1; - break; - case MFI_STATE_WAIT_HANDSHAKE: - mfi_flags = 0x08; - /* fallthrough */ - case MFI_STATE_BOOT_MESSAGE_PENDING: - mfi_flags |= 0x10; - if (pci->device == PCI_DEVICE_ID_LSI_SAS2004 || - pci->device == PCI_DEVICE_ID_LSI_SAS2008 || - pci->device == PCI_DEVICE_ID_LSI_SAS2208 || - pci->device == PCI_DEVICE_ID_LSI_SAS3108) { - outl(mfi_flags, ioaddr + MFI_DB); - } else { - outl(mfi_flags, ioaddr + MFI_IDB); - } - break; - case MFI_STATE_OPERATIONAL: - mfi_flags = 0x07; - if (pci->device == PCI_DEVICE_ID_LSI_SAS2004 || - pci->device == PCI_DEVICE_ID_LSI_SAS2008 || - pci->device == PCI_DEVICE_ID_LSI_SAS2208 || - pci->device == PCI_DEVICE_ID_LSI_SAS3108) { - outl(mfi_flags, ioaddr + MFI_DB); - if (pci->device == PCI_DEVICE_ID_LSI_SAS2208 || - pci->device == PCI_DEVICE_ID_LSI_SAS3108) { - int j = 0; - u32 doorbell; - - while (j < MEGASAS_POLL_TIMEOUT) { - doorbell = inl(ioaddr + MFI_DB) & 1; - if (!doorbell) - break; - msleep(20); - j++; - } - } - } else { - outl(mfi_flags, ioaddr + MFI_IDB); - } - break; - case MFI_STATE_READY: - dprintf(2, "MegaRAID SAS fw ready\n"); - return 0; - } - // The current state should not last longer than poll timeout - u32 end = timer_calc(MEGASAS_POLL_TIMEOUT); - for (;;) { - if (timer_check(end)) { - break; - } - yield(); - fw_state = new_state; - if (pci->device == PCI_DEVICE_ID_LSI_SAS1064R || - pci->device == PCI_DEVICE_ID_DELL_PERC5) - new_state = inl(ioaddr + MFI_OMSG0) & MFI_STATE_MASK; - else - new_state = inl(ioaddr + MFI_OSP0) & MFI_STATE_MASK; - if (new_state != fw_state) { - break; - } - } - } - dprintf(1, "ERROR: fw in state %x\n", new_state & MFI_STATE_MASK); - return -1; -} - -static void -init_megasas(void *data) -{ - struct pci_device *pci = data; - u32 bar = PCI_BASE_ADDRESS_2; - if (!(pci_config_readl(pci->bdf, bar) & PCI_BASE_ADDRESS_IO_MASK)) - bar = PCI_BASE_ADDRESS_0; - u32 iobase = pci_enable_iobar(pci, bar); - if (!iobase) - return; - pci_enable_busmaster(pci); - - dprintf(1, "found MegaRAID SAS at %pP, io @ %x\n", pci, iobase); - - // reset - if (megasas_transition_to_ready(pci, iobase) == 0) - megasas_scan_target(pci, iobase); -} - -void -megasas_setup(void) -{ - ASSERT32FLAT(); - if (!CONFIG_MEGASAS) - return; - - dprintf(3, "init megasas\n"); - - struct pci_device *pci; - foreachpci(pci) { - if (pci->vendor != PCI_VENDOR_ID_LSI_LOGIC && - pci->vendor != PCI_VENDOR_ID_DELL) - continue; - if (pci->device == PCI_DEVICE_ID_LSI_SAS1064R || - pci->device == PCI_DEVICE_ID_LSI_SAS1078 || - pci->device == PCI_DEVICE_ID_LSI_SAS1078DE || - pci->device == PCI_DEVICE_ID_LSI_SAS2108 || - pci->device == PCI_DEVICE_ID_LSI_SAS2108E || - pci->device == PCI_DEVICE_ID_LSI_SAS2004 || - pci->device == PCI_DEVICE_ID_LSI_SAS2008 || - pci->device == PCI_DEVICE_ID_LSI_VERDE_ZCR || - pci->device == PCI_DEVICE_ID_DELL_PERC5 || - pci->device == PCI_DEVICE_ID_LSI_SAS2208 || - pci->device == PCI_DEVICE_ID_LSI_SAS3108) - run_thread(init_megasas, pci); - } -} diff --git a/payloads/external/SeaBIOS/src/hw/megasas.h b/payloads/external/SeaBIOS/src/hw/megasas.h deleted file mode 100644 index ed0e4f09..00000000 --- a/payloads/external/SeaBIOS/src/hw/megasas.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef __MEGASAS_H -#define __MEGASAS_H - -struct disk_op_s; -int megasas_process_op(struct disk_op_s *op); -void megasas_setup(void); - -#endif /* __MEGASAS_H */ diff --git a/payloads/external/SeaBIOS/src/hw/mpt-scsi.c b/payloads/external/SeaBIOS/src/hw/mpt-scsi.c deleted file mode 100644 index 570b2126..00000000 --- a/payloads/external/SeaBIOS/src/hw/mpt-scsi.c +++ /dev/null @@ -1,321 +0,0 @@ -// MPT Fusion boot support. -// -// Copyright (c) 2012 Verizon, Inc. -// Copyright (C) 2016 Paolo Bonzini <pbonzini@redhat.com> -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "biosvar.h" // GET_GLOBALFLAT -#include "block.h" // struct drive_s -#include "blockcmd.h" // scsi_drive_setup -#include "config.h" // CONFIG_* -#include "fw/paravirt.h" // runningOnQEMU -#include "malloc.h" // free -#include "output.h" // dprintf -#include "pcidevice.h" // foreachpci -#include "pci_ids.h" // PCI_DEVICE_ID -#include "pci_regs.h" // PCI_VENDOR_ID -#include "stacks.h" // run_thread -#include "std/disk.h" // DISK_RET_SUCCESS -#include "string.h" // memset -#include "util.h" // usleep - -#define MPT_REG_DOORBELL 0x00 -#define MPT_REG_WRITE_SEQ 0x04 -#define MPT_REG_HOST_DIAG 0x08 -#define MPT_REG_TEST 0x0c -#define MPT_REG_DIAG_DATA 0x10 -#define MPT_REG_DIAG_ADDR 0x14 -#define MPT_REG_ISTATUS 0x30 -#define MPT_REG_IMASK 0x34 -#define MPT_REG_REQ_Q 0x40 -#define MPT_REG_REP_Q 0x44 - -#define MPT_DOORBELL_MSG_RESET 0x40 -#define MPT_DOORBELL_HANDSHAKE 0x42 - -#define MPT_IMASK_DOORBELL 0x01 -#define MPT_IMASK_REPLY 0x08 - -struct mpt_lun_s { - struct drive_s drive; - struct pci_device *pci; - u32 iobase; - u8 target; - u8 lun; -}; - -u8 reply_msg[4] __attribute((aligned(4))) VARLOW; - -#define MPT_MESSAGE_HDR_FUNCTION_SCSI_IO_REQUEST (0x00) -#define MPT_MESSAGE_HDR_FUNCTION_IOC_INIT (0x02) - -static struct MptIOCInitRequest -{ - u8 WhoInit; /* Which system sent this init request. */ - u8 Reserved1; /* Reserved */ - u8 ChainOffset; /* Chain offset in the SG list. */ - u8 Function; /* Function to execute. */ - u8 Flags; /* Flags */ - u8 MaxDevices; /* Max devices the driver can handle. */ - u8 MaxBuses; /* Max buses the driver can handle. */ - u8 MessageFlags; /* Message flags. */ - u32 MessageContext; /* Message context ID. */ - u16 ReplyFrameSize; /* Reply frame size. */ - u16 Reserved2; /* Reserved */ - u32 HostMfaHighAddr; /* Upper 32bit of the message frames. */ - u32 SenseBufferHighAddr; /* Upper 32bit of the sense buffer. */ -} MptIOCInitRequest = { - .WhoInit = 2, - .Function = MPT_MESSAGE_HDR_FUNCTION_IOC_INIT, - .MaxDevices = 8, - .MaxBuses = 1, - .ReplyFrameSize = sizeof(reply_msg), - .HostMfaHighAddr = 0, - .SenseBufferHighAddr = 0 -}; - -struct MptIOCInitReply { - u8 WhoInit; /* Which subsystem sent this init request. */ - u8 Reserved1; /* Reserved */ - u8 MessageLength; /* Message length */ - u8 Function; /* Function. */ - u8 Flags; /* Flags */ - u8 MaxDevices; /* Maximum number of devices the driver can handle. */ - u8 MaxBuses; /* Maximum number of busses the driver can handle. */ - u8 MessageFlags; /* Message flags. */ - u32 MessageContext; /* Message context ID */ - u16 Reserved2; /* Reserved */ - u16 IOCStatus; /* IO controller status. */ - u32 IOCLogInfo; /* IO controller log information. */ -}; - -typedef struct MptSCSIIORequest { - u8 TargetID; /* Target ID */ - u8 Bus; /* Bus number */ - u8 ChainOffset; /* Chain offset */ - u8 Function; /* Function number. */ - u8 CDBLength; /* CDB length. */ - u8 SenseBufferLength; /* Sense buffer length. */ - u8 Reserved; /* Reserved */ - u8 MessageFlags; /* Message flags. */ - u32 MessageContext; /* Message context ID. */ - u8 LUN[8]; /* LUN */ - u32 Control; /* Control values. */ - u8 CDB[16]; /* The CDB. */ - u32 DataLength; /* Data length. */ - u32 SenseBufferLowAddr; /* Sense buffer low 32bit address. */ -} __attribute__((packed)) MptSCSIIORequest_t; - -#define MPT_POLL_TIMEOUT 60000 - -typedef struct MptSGEntrySimple32 { - u32 FlagsLength; - u32 DataBufferAddressLow; -} __attribute__((packed)) MptSGEntrySimple32_t; - -static int -mpt_scsi_cmd(u32 iobase, struct disk_op_s *op, - u8 *cdb, u16 target, u16 lun, u16 blocksize) -{ - u32 end = timer_calc(MPT_POLL_TIMEOUT); - - u8 sense_buf[18]; - struct scsi_req { - MptSCSIIORequest_t scsi_io; - MptSGEntrySimple32_t sge; - } __attribute__((packed, aligned(4))) req = { - .scsi_io = { - .TargetID = target, - .Bus = 0, - .Function = MPT_MESSAGE_HDR_FUNCTION_SCSI_IO_REQUEST, - .CDBLength = 16, - .SenseBufferLength = 18, - .MessageContext = end & 0x7fffffff, - .DataLength = op->count * blocksize, - .SenseBufferLowAddr = (u32)MAKE_FLATPTR(GET_SEG(SS), &sense_buf[0]), - }, - .sge = { - /* end of list, simple entry, end of buffer, last element */ - .FlagsLength = (op->count * blocksize) | 0xD1000000, - .DataBufferAddressLow = (u32)op->buf_fl, - } - }; - - req.scsi_io.LUN[1] = lun; - memcpy(req.scsi_io.CDB, cdb, 16); - if (blocksize) { - if (scsi_is_read(op)) { - req.scsi_io.Control = 2 << 24; - } else { - req.scsi_io.Control = 1 << 24; - req.sge.FlagsLength |= 0x04000000; - } - } - - outl((u32)MAKE_FLATPTR(GET_SEG(SS), &req), iobase + MPT_REG_REQ_Q); - - for (;;) { - if (timer_check(end)) { - return DISK_RET_ETIMEOUT; - } - - u32 istatus = inl(iobase + MPT_REG_ISTATUS); - if (istatus & MPT_IMASK_REPLY) { - u32 resp = inl(iobase + MPT_REG_REP_Q); - /* another read to turn interrupt off */ - inl(iobase + MPT_REG_REP_Q); - if (resp == req.scsi_io.MessageContext) { - return DISK_RET_SUCCESS; - } else if (resp & 0x80000000) { - outl((u32)&reply_msg[0], iobase + MPT_REG_REP_Q); - return DISK_RET_EBADTRACK; - } - } - usleep(50); - } -} - -int -mpt_scsi_process_op(struct disk_op_s *op) -{ - if (!CONFIG_MPT_SCSI) - return DISK_RET_EBADTRACK; - - u8 cdbcmd[16]; - int blocksize = scsi_fill_cmd(op, cdbcmd, sizeof(cdbcmd)); - if (blocksize < 0) - return default_process_op(op); - - struct mpt_lun_s *llun_gf = - container_of(op->drive_fl, struct mpt_lun_s, drive); - u16 target = GET_GLOBALFLAT(llun_gf->target); - u16 lun = GET_GLOBALFLAT(llun_gf->lun); - u32 iobase = GET_GLOBALFLAT(llun_gf->iobase); - return mpt_scsi_cmd(iobase, op, cdbcmd, target, lun, blocksize); -} - -static void -mpt_scsi_init_lun(struct mpt_lun_s *llun, struct pci_device *pci, - u32 iobase, u8 target, u8 lun) -{ - memset(llun, 0, sizeof(*llun)); - llun->drive.type = DTYPE_MPT_SCSI; - llun->drive.cntl_id = pci->bdf; - llun->pci = pci; - llun->target = target; - llun->lun = lun; - llun->iobase = iobase; -} - -static int -mpt_scsi_add_lun(u32 lun, struct drive_s *tmpl_drv) -{ - struct mpt_lun_s *tmpl_llun = - container_of(tmpl_drv, struct mpt_lun_s, drive); - struct mpt_lun_s *llun = malloc_fseg(sizeof(*llun)); - if (!llun) { - warn_noalloc(); - return -1; - } - mpt_scsi_init_lun(llun, tmpl_llun->pci, tmpl_llun->iobase, - tmpl_llun->target, lun); - - boot_lchs_find_scsi_device(llun->pci, llun->target, llun->lun, - &(llun->drive.lchs)); - char *name = znprintf(MAXDESCSIZE, "mpt %pP %d:%d", - llun->pci, llun->target, llun->lun); - int prio = bootprio_find_scsi_device(llun->pci, llun->target, llun->lun); - int ret = scsi_drive_setup(&llun->drive, name, prio); - free(name); - if (ret) { - goto fail; - } - return 0; - -fail: - free(llun); - return -1; -} - -static void -mpt_scsi_scan_target(struct pci_device *pci, u32 iobase, u8 target) -{ - struct mpt_lun_s llun0; - - mpt_scsi_init_lun(&llun0, pci, iobase, target, 0); - - if (scsi_rep_luns_scan(&llun0.drive, mpt_scsi_add_lun) < 0) - scsi_sequential_scan(&llun0.drive, 8, mpt_scsi_add_lun); -} - -static inline void -mpt_out_doorbell(u8 func, u8 arg, u16 iobase) -{ - outl((func << 24) | (arg << 16), iobase + MPT_REG_DOORBELL); -} - -static void -init_mpt_scsi(void *data) -{ - struct pci_device *pci = data; - u16 *msg_in_p; - u32 iobase = pci_enable_iobar(pci, PCI_BASE_ADDRESS_0); - if (!iobase) - return; - struct MptIOCInitReply MptIOCInitReply; - pci_enable_busmaster(pci); - - dprintf(1, "found mpt-scsi(%04x) at %pP, io @ %x\n" - , pci->device, pci, iobase); - - // reset - mpt_out_doorbell(MPT_DOORBELL_MSG_RESET, 0, iobase); - outl(MPT_IMASK_DOORBELL|MPT_IMASK_REPLY , iobase + MPT_REG_IMASK); - outl(0, iobase + MPT_REG_ISTATUS); - - // send IOC Init message through the doorbell - mpt_out_doorbell(MPT_DOORBELL_HANDSHAKE, - sizeof(MptIOCInitRequest)/sizeof(u32), - iobase); - - outsl(iobase + MPT_REG_DOORBELL, - (u32 *)&MptIOCInitRequest, - sizeof(MptIOCInitRequest)/sizeof(u32)); - - // Read the reply 16 bits at a time. Cannot use insl - // because the port is 32 bits wide. - msg_in_p = (u16 *)&MptIOCInitReply; - while(msg_in_p != (u16 *)(&MptIOCInitReply + 1)) - *msg_in_p++ = (u16)inl(iobase + MPT_REG_DOORBELL); - - // Eat doorbell interrupt - outl(0, iobase + MPT_REG_ISTATUS); - - // Post reply message used for SCSI errors - outl((u32)&reply_msg[0], iobase + MPT_REG_REP_Q); - - int i; - for (i = 0; i < 7; i++) - mpt_scsi_scan_target(pci, iobase, i); -} - -void -mpt_scsi_setup(void) -{ - ASSERT32FLAT(); - if (!CONFIG_MPT_SCSI || !runningOnQEMU()) { - return; - } - - dprintf(3, "init MPT\n"); - - struct pci_device *pci; - foreachpci(pci) { - if (pci->vendor == PCI_VENDOR_ID_LSI_LOGIC - && (pci->device == PCI_DEVICE_ID_LSI_53C1030 - || pci->device == PCI_DEVICE_ID_LSI_SAS1068 - || pci->device == PCI_DEVICE_ID_LSI_SAS1068E)) - run_thread(init_mpt_scsi, pci); - } -} diff --git a/payloads/external/SeaBIOS/src/hw/mpt-scsi.h b/payloads/external/SeaBIOS/src/hw/mpt-scsi.h deleted file mode 100644 index 6535dd8d..00000000 --- a/payloads/external/SeaBIOS/src/hw/mpt-scsi.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef __MPT_SCSI_H -#define __MPT_SCSI_H - -struct disk_op_s; -int mpt_scsi_process_op(struct disk_op_s *op); -void mpt_scsi_setup(void); - -#endif /* __MPT_SCSI_H */ diff --git a/payloads/external/SeaBIOS/src/hw/nvme-int.h b/payloads/external/SeaBIOS/src/hw/nvme-int.h deleted file mode 100644 index a4c1555c..00000000 --- a/payloads/external/SeaBIOS/src/hw/nvme-int.h +++ /dev/null @@ -1,212 +0,0 @@ -// NVMe datastructures and constants -// -// Copyright 2017 Amazon.com, Inc. or its affiliates. -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#ifndef __NVME_INT_H -#define __NVME_INT_H - -#include "types.h" // u32 -#include "pcidevice.h" // struct pci_device - -#define NVME_MAX_PRPL_ENTRIES 15 /* Allows requests up to 64kb */ - -/* Data structures */ - -/* The register file of a NVMe host controller. This struct follows the naming - scheme in the NVMe specification. */ -struct nvme_reg { - u64 cap; /* controller capabilities */ - u32 vs; /* version */ - u32 intms; /* interrupt mask set */ - u32 intmc; /* interrupt mask clear */ - u32 cc; /* controller configuration */ - u32 _res0; - u32 csts; /* controller status */ - u32 _res1; - u32 aqa; /* admin queue attributes */ - u64 asq; /* admin submission queue base address */ - u64 acq; /* admin completion queue base address */ -}; - -/* Submission queue entry */ -struct nvme_sqe { - union { - u32 dword[16]; - struct { - u32 cdw0; /* Command DWORD 0 */ - u32 nsid; /* Namespace ID */ - u64 _res0; - u64 mptr; /* metadata ptr */ - - u64 dptr_prp1; - u64 dptr_prp2; - }; - }; -}; - -/* Completion queue entry */ -struct nvme_cqe { - union { - u32 dword[4]; - struct { - u32 cdw0; - u32 _res0; - u16 sq_head; - u16 sq_id; - u16 cid; - u16 status; - }; - }; -}; - -/* The common part of every submission or completion queue. */ -struct nvme_queue { - u32 *dbl; /* doorbell */ - u16 mask; /* length - 1 */ -}; - -struct nvme_cq { - struct nvme_queue common; - struct nvme_cqe *cqe; - - /* We have read upto (but not including) this entry in the queue. */ - u16 head; - - /* The current phase bit the controller uses to indicate that it has written - a new entry. This is inverted after each wrap. */ - unsigned phase : 1; -}; - -struct nvme_sq { - struct nvme_queue common; - struct nvme_sqe *sqe; - - /* Corresponding completion queue. We only support a single SQ per CQ. */ - struct nvme_cq *cq; - - /* The last entry the controller has fetched. */ - u16 head; - - /* The last value we have written to the tail doorbell. */ - u16 tail; -}; - -struct nvme_ctrl { - struct pci_device *pci; - struct nvme_reg volatile *reg; - - u32 doorbell_stride; /* in bytes */ - - struct nvme_sq admin_sq; - struct nvme_cq admin_cq; - - u32 ns_count; - - struct nvme_sq io_sq; - struct nvme_cq io_cq; -}; - -struct nvme_namespace { - struct drive_s drive; - struct nvme_ctrl *ctrl; - - u32 ns_id; - - u64 lba_count; /* The total amount of sectors. */ - - u32 block_size; - u32 metadata_size; - u32 max_req_size; - - /* Page aligned buffer of size NVME_PAGE_SIZE. */ - char *dma_buffer; - - /* Page List */ - u32 prpl_len; - void *prp1; - u64 prpl[NVME_MAX_PRPL_ENTRIES]; -}; - -/* Data structures for NVMe admin identify commands */ - -struct nvme_identify_ctrl { - u16 vid; - u16 ssvid; - char sn[20]; - char mn[40]; - char fr[8]; - - u8 rab; - u8 ieee[3]; - u8 cmic; - u8 mdts; - - char _boring[516 - 78]; - - u32 nn; /* number of namespaces */ -}; - -struct nvme_identify_ns_list { - u32 ns_id[1024]; -}; - -struct nvme_lba_format { - u16 ms; - u8 lbads; - u8 rp; - u8 res; -}; - -struct nvme_identify_ns { - u64 nsze; - u64 ncap; - u64 nuse; - u8 nsfeat; - u8 nlbaf; - u8 flbas; - - char _boring[128 - 27]; - - struct nvme_lba_format lbaf[16]; -}; - -union nvme_identify { - struct nvme_identify_ns ns; - struct nvme_identify_ctrl ctrl; - struct nvme_identify_ns_list ns_list; -}; - -/* NVMe constants */ - -#define NVME_CAP_CSS_NVME (1ULL << 37) - -#define NVME_CSTS_FATAL (1U << 1) -#define NVME_CSTS_RDY (1U << 0) - -#define NVME_CC_EN (1U << 0) - -#define NVME_SQE_OPC_ADMIN_CREATE_IO_SQ 1U -#define NVME_SQE_OPC_ADMIN_CREATE_IO_CQ 5U -#define NVME_SQE_OPC_ADMIN_IDENTIFY 6U - -#define NVME_SQE_OPC_IO_WRITE 1U -#define NVME_SQE_OPC_IO_READ 2U - -#define NVME_ADMIN_IDENTIFY_CNS_ID_NS 0U -#define NVME_ADMIN_IDENTIFY_CNS_ID_CTRL 1U -#define NVME_ADMIN_IDENTIFY_CNS_GET_NS_LIST 2U - -#define NVME_CQE_DW3_P (1U << 16) - -#define NVME_PAGE_SIZE 4096 -#define NVME_PAGE_MASK ~(NVME_PAGE_SIZE - 1) - -/* Length for the queue entries. */ -#define NVME_SQE_SIZE_LOG 6 -#define NVME_CQE_SIZE_LOG 4 - -#endif - -/* EOF */ diff --git a/payloads/external/SeaBIOS/src/hw/nvme.c b/payloads/external/SeaBIOS/src/hw/nvme.c deleted file mode 100644 index f035fa2c..00000000 --- a/payloads/external/SeaBIOS/src/hw/nvme.c +++ /dev/null @@ -1,786 +0,0 @@ -// Low level NVMe disk access -// -// Copyright 2017 Amazon.com, Inc. or its affiliates. -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "blockcmd.h" -#include "malloc.h" // malloc_high -#include "output.h" // dprintf -#include "pci.h" -#include "pci_ids.h" // PCI_CLASS_STORAGE_NVME -#include "pci_regs.h" // PCI_BASE_ADDRESS_0 -#include "pcidevice.h" // foreachpci -#include "stacks.h" // yield -#include "std/disk.h" // DISK_RET_ -#include "string.h" // memset -#include "util.h" // boot_add_hd -#include "x86.h" // readl - -#include "nvme.h" -#include "nvme-int.h" - -static void * -zalloc_page_aligned(struct zone_s *zone, u32 size) -{ - void *res = _malloc(zone, size, NVME_PAGE_SIZE); - if (res) memset(res, 0, size); - return res; -} - -static void -nvme_init_queue_common(struct nvme_ctrl *ctrl, struct nvme_queue *q, u16 q_idx, - u16 length) -{ - memset(q, 0, sizeof(*q)); - q->dbl = (u32 *)((char *)ctrl->reg + 0x1000 + q_idx * ctrl->doorbell_stride); - dprintf(3, " q %p q_idx %u dbl %p\n", q, q_idx, q->dbl); - q->mask = length - 1; -} - -static int -nvme_init_sq(struct nvme_ctrl *ctrl, struct nvme_sq *sq, u16 q_idx, u16 length, - struct nvme_cq *cq) -{ - nvme_init_queue_common(ctrl, &sq->common, q_idx, length); - sq->sqe = zalloc_page_aligned(&ZoneHigh, sizeof(*sq->sqe) * length); - - if (!sq->sqe) { - warn_noalloc(); - return -1; - } - - dprintf(3, "sq %p q_idx %u sqe %p\n", sq, q_idx, sq->sqe); - sq->cq = cq; - sq->head = 0; - sq->tail = 0; - - return 0; -} - -static int -nvme_init_cq(struct nvme_ctrl *ctrl, struct nvme_cq *cq, u16 q_idx, u16 length) -{ - nvme_init_queue_common(ctrl, &cq->common, q_idx, length); - cq->cqe = zalloc_page_aligned(&ZoneHigh, sizeof(*cq->cqe) * length); - if (!cq->cqe) { - warn_noalloc(); - return -1; - } - - cq->head = 0; - - /* All CQE phase bits are initialized to zero. This means initially we wait - for the host controller to set these to 1. */ - cq->phase = 1; - - return 0; -} - -static int -nvme_poll_cq(struct nvme_cq *cq) -{ - u32 dw3 = readl(&cq->cqe[cq->head].dword[3]); - return (!!(dw3 & NVME_CQE_DW3_P) == cq->phase); -} - -static int -nvme_is_cqe_success(struct nvme_cqe const *cqe) -{ - return ((cqe->status >> 1) & 0xFF) == 0; -} - -static struct nvme_cqe -nvme_error_cqe(void) -{ - struct nvme_cqe r; - - /* 0xFF is a vendor specific status code != success. Should be okay for - indicating failure. */ - memset(&r, 0xFF, sizeof(r)); - return r; -} - -static struct nvme_cqe -nvme_consume_cqe(struct nvme_sq *sq) -{ - struct nvme_cq *cq = sq->cq; - - if (!nvme_poll_cq(cq)) { - /* Cannot consume a completion queue entry, if there is none ready. */ - return nvme_error_cqe(); - } - - struct nvme_cqe *cqe = &cq->cqe[cq->head]; - u16 cq_next_head = (cq->head + 1) & cq->common.mask; - dprintf(4, "cq %p head %u -> %u\n", cq, cq->head, cq_next_head); - if (cq_next_head < cq->head) { - dprintf(3, "cq %p wrap\n", cq); - cq->phase = ~cq->phase; - } - cq->head = cq_next_head; - - /* Update the submission queue head. */ - if (cqe->sq_head != sq->head) { - sq->head = cqe->sq_head; - dprintf(4, "sq %p advanced to %u\n", sq, cqe->sq_head); - } - - /* Tell the controller that we consumed the completion. */ - writel(cq->common.dbl, cq->head); - - return *cqe; -} - -static struct nvme_cqe -nvme_wait(struct nvme_sq *sq) -{ - static const unsigned nvme_timeout = 5000 /* ms */; - u32 to = timer_calc(nvme_timeout); - while (!nvme_poll_cq(sq->cq)) { - yield(); - - if (timer_check(to)) { - warn_timeout(); - return nvme_error_cqe(); - } - } - - return nvme_consume_cqe(sq); -} - -/* Returns the next submission queue entry (or NULL if the queue is full). It - also fills out Command Dword 0 and clears the rest. */ -static struct nvme_sqe * -nvme_get_next_sqe(struct nvme_sq *sq, u8 opc, void *metadata, void *data, void *data2) -{ - if (((sq->head + 1) & sq->common.mask) == sq->tail) { - dprintf(3, "submission queue is full\n"); - return NULL; - } - - struct nvme_sqe *sqe = &sq->sqe[sq->tail]; - dprintf(4, "sq %p next_sqe %u\n", sq, sq->tail); - - memset(sqe, 0, sizeof(*sqe)); - sqe->cdw0 = opc | (sq->tail << 16 /* CID */); - sqe->mptr = (u32)metadata; - sqe->dptr_prp1 = (u32)data; - sqe->dptr_prp2 = (u32)data2; - - return sqe; -} - -/* Call this after you've filled out an sqe that you've got from nvme_get_next_sqe. */ -static void -nvme_commit_sqe(struct nvme_sq *sq) -{ - dprintf(4, "sq %p commit_sqe %u\n", sq, sq->tail); - sq->tail = (sq->tail + 1) & sq->common.mask; - writel(sq->common.dbl, sq->tail); -} - -/* Perform an identify command on the admin queue and return the resulting - buffer. This may be a NULL pointer, if something failed. This function - cannot be used after initialization, because it uses buffers in tmp zone. */ -static union nvme_identify * -nvme_admin_identify(struct nvme_ctrl *ctrl, u8 cns, u32 nsid) -{ - union nvme_identify *identify_buf = zalloc_page_aligned(&ZoneTmpHigh, 4096); - if (!identify_buf) { - /* Could not allocate identify buffer. */ - warn_internalerror(); - return NULL; - } - - struct nvme_sqe *cmd_identify; - cmd_identify = nvme_get_next_sqe(&ctrl->admin_sq, - NVME_SQE_OPC_ADMIN_IDENTIFY, NULL, - identify_buf, NULL); - - if (!cmd_identify) { - warn_internalerror(); - goto error; - } - - cmd_identify->nsid = nsid; - cmd_identify->dword[10] = cns; - - nvme_commit_sqe(&ctrl->admin_sq); - - struct nvme_cqe cqe = nvme_wait(&ctrl->admin_sq); - - if (!nvme_is_cqe_success(&cqe)) { - goto error; - } - - return identify_buf; - error: - free(identify_buf); - return NULL; -} - -static struct nvme_identify_ctrl * -nvme_admin_identify_ctrl(struct nvme_ctrl *ctrl) -{ - return &nvme_admin_identify(ctrl, NVME_ADMIN_IDENTIFY_CNS_ID_CTRL, 0)->ctrl; -} - -static struct nvme_identify_ns * -nvme_admin_identify_ns(struct nvme_ctrl *ctrl, u32 ns_id) -{ - return &nvme_admin_identify(ctrl, NVME_ADMIN_IDENTIFY_CNS_ID_NS, - ns_id)->ns; -} - -static void -nvme_probe_ns(struct nvme_ctrl *ctrl, u32 ns_idx, u8 mdts) -{ - u32 ns_id = ns_idx + 1; - - struct nvme_identify_ns *id = nvme_admin_identify_ns(ctrl, ns_id); - if (!id) { - dprintf(2, "NVMe couldn't identify namespace %u.\n", ns_id); - goto free_buffer; - } - - u8 current_lba_format = id->flbas & 0xF; - if (current_lba_format > id->nlbaf) { - dprintf(2, "NVMe NS %u: current LBA format %u is beyond what the " - " namespace supports (%u)?\n", - ns_id, current_lba_format, id->nlbaf + 1); - goto free_buffer; - } - - if (!id->nsze) { - dprintf(2, "NVMe NS %u is inactive.\n", ns_id); - goto free_buffer; - } - - struct nvme_namespace *ns = malloc_fseg(sizeof(*ns)); - if (!ns) { - warn_noalloc(); - goto free_buffer; - } - memset(ns, 0, sizeof(*ns)); - ns->ctrl = ctrl; - ns->ns_id = ns_id; - ns->lba_count = id->nsze; - - struct nvme_lba_format *fmt = &id->lbaf[current_lba_format]; - - ns->block_size = 1U << fmt->lbads; - ns->metadata_size = fmt->ms; - - if (ns->block_size > NVME_PAGE_SIZE) { - /* If we see devices that trigger this path, we need to increase our - buffer size. */ - warn_internalerror(); - free(ns); - goto free_buffer; - } - - ns->drive.cntl_id = ns_idx; - ns->drive.removable = 0; - ns->drive.type = DTYPE_NVME; - ns->drive.blksize = ns->block_size; - ns->drive.sectors = ns->lba_count; - - if (mdts) { - ns->max_req_size = ((1U << mdts) * NVME_PAGE_SIZE) / ns->block_size; - dprintf(3, "NVME NS %u max request size: %d sectors\n", - ns_id, ns->max_req_size); - } else { - ns->max_req_size = -1U; - } - - ns->dma_buffer = zalloc_page_aligned(&ZoneHigh, NVME_PAGE_SIZE); - - char *desc = znprintf(MAXDESCSIZE, "NVMe NS %u: %llu MiB (%llu %u-byte " - "blocks + %u-byte metadata)", - ns_id, (ns->lba_count * ns->block_size) >> 20, - ns->lba_count, ns->block_size, ns->metadata_size); - - dprintf(3, "%s\n", desc); - boot_add_hd(&ns->drive, desc, bootprio_find_pci_device(ctrl->pci)); - -free_buffer: - free (id); -} - - -/* Release memory allocated for a completion queue */ -static void -nvme_destroy_cq(struct nvme_cq *cq) -{ - free(cq->cqe); - cq->cqe = NULL; -} - -/* Release memory allocated for a submission queue */ -static void -nvme_destroy_sq(struct nvme_sq *sq) -{ - free(sq->sqe); - sq->sqe = NULL; -} - -/* Returns 0 on success. */ -static int -nvme_create_io_cq(struct nvme_ctrl *ctrl, struct nvme_cq *cq, u16 q_idx) -{ - int rc; - struct nvme_sqe *cmd_create_cq; - u32 length = 1 + (ctrl->reg->cap & 0xffff); - if (length > NVME_PAGE_SIZE / sizeof(struct nvme_cqe)) - length = NVME_PAGE_SIZE / sizeof(struct nvme_cqe); - - rc = nvme_init_cq(ctrl, cq, q_idx, length); - if (rc) { - goto err; - } - - cmd_create_cq = nvme_get_next_sqe(&ctrl->admin_sq, - NVME_SQE_OPC_ADMIN_CREATE_IO_CQ, NULL, - cq->cqe, NULL); - if (!cmd_create_cq) { - goto err_destroy_cq; - } - - cmd_create_cq->dword[10] = (cq->common.mask << 16) | (q_idx >> 1); - cmd_create_cq->dword[11] = 1 /* physically contiguous */; - - nvme_commit_sqe(&ctrl->admin_sq); - - struct nvme_cqe cqe = nvme_wait(&ctrl->admin_sq); - - if (!nvme_is_cqe_success(&cqe)) { - dprintf(2, "create io cq failed: %08x %08x %08x %08x\n", - cqe.dword[0], cqe.dword[1], cqe.dword[2], cqe.dword[3]); - - goto err_destroy_cq; - } - - return 0; - -err_destroy_cq: - nvme_destroy_cq(cq); -err: - return -1; -} - -/* Returns 0 on success. */ -static int -nvme_create_io_sq(struct nvme_ctrl *ctrl, struct nvme_sq *sq, u16 q_idx, struct nvme_cq *cq) -{ - int rc; - struct nvme_sqe *cmd_create_sq; - u32 length = 1 + (ctrl->reg->cap & 0xffff); - if (length > NVME_PAGE_SIZE / sizeof(struct nvme_cqe)) - length = NVME_PAGE_SIZE / sizeof(struct nvme_cqe); - - rc = nvme_init_sq(ctrl, sq, q_idx, length, cq); - if (rc) { - goto err; - } - - cmd_create_sq = nvme_get_next_sqe(&ctrl->admin_sq, - NVME_SQE_OPC_ADMIN_CREATE_IO_SQ, NULL, - sq->sqe, NULL); - if (!cmd_create_sq) { - goto err_destroy_sq; - } - - cmd_create_sq->dword[10] = (sq->common.mask << 16) | (q_idx >> 1); - cmd_create_sq->dword[11] = (q_idx >> 1) << 16 | 1 /* contiguous */; - dprintf(3, "sq %p create dword10 %08x dword11 %08x\n", sq, - cmd_create_sq->dword[10], cmd_create_sq->dword[11]); - - nvme_commit_sqe(&ctrl->admin_sq); - - struct nvme_cqe cqe = nvme_wait(&ctrl->admin_sq); - - if (!nvme_is_cqe_success(&cqe)) { - dprintf(2, "create io sq failed: %08x %08x %08x %08x\n", - cqe.dword[0], cqe.dword[1], cqe.dword[2], cqe.dword[3]); - goto err_destroy_sq; - } - - return 0; - -err_destroy_sq: - nvme_destroy_sq(sq); -err: - return -1; -} - -/* Reads count sectors into buf. Returns DISK_RET_*. The buffer cannot cross - page boundaries. */ -static int -nvme_io_readwrite(struct nvme_namespace *ns, u64 lba, char *buf, u16 count, - int write) -{ - u32 buf_addr = (u32)buf; - void *prp2; - - if (buf_addr & 0x3) { - /* Buffer is misaligned */ - warn_internalerror(); - return DISK_RET_EBADTRACK; - } - - if ((ns->block_size * count) > (NVME_PAGE_SIZE * 2)) { - /* We need to describe more than 2 pages, rely on PRP List */ - prp2 = ns->prpl; - } else if ((ns->block_size * count) > NVME_PAGE_SIZE) { - /* Directly embed the 2nd page if we only need 2 pages */ - prp2 = (void *)(long)ns->prpl[0]; - } else { - /* One page is enough, don't expose anything else */ - prp2 = NULL; - } - - struct nvme_sqe *io_read = nvme_get_next_sqe(&ns->ctrl->io_sq, - write ? NVME_SQE_OPC_IO_WRITE - : NVME_SQE_OPC_IO_READ, - NULL, buf, prp2); - io_read->nsid = ns->ns_id; - io_read->dword[10] = (u32)lba; - io_read->dword[11] = (u32)(lba >> 32); - io_read->dword[12] = (1U << 31 /* limited retry */) | (count - 1); - - nvme_commit_sqe(&ns->ctrl->io_sq); - - struct nvme_cqe cqe = nvme_wait(&ns->ctrl->io_sq); - - if (!nvme_is_cqe_success(&cqe)) { - dprintf(2, "read io: %08x %08x %08x %08x\n", - cqe.dword[0], cqe.dword[1], cqe.dword[2], cqe.dword[3]); - - return DISK_RET_EBADTRACK; - } - - return DISK_RET_SUCCESS; -} - -static void nvme_reset_prpl(struct nvme_namespace *ns) -{ - ns->prpl_len = 0; -} - -static int nvme_add_prpl(struct nvme_namespace *ns, u64 base) -{ - if (ns->prpl_len >= NVME_MAX_PRPL_ENTRIES) - return -1; - - ns->prpl[ns->prpl_len++] = base; - - return 0; -} - -static int nvme_build_prpl(struct nvme_namespace *ns, void *op_buf, u16 count) -{ - int first_page = 1; - u32 base = (long)op_buf; - s32 size; - - if (count > ns->max_req_size) - count = ns->max_req_size; - - nvme_reset_prpl(ns); - - size = count * ns->block_size; - /* Special case for transfers that fit into PRP1, but are unaligned */ - if (((size + (base & ~NVME_PAGE_MASK)) <= NVME_PAGE_SIZE)) { - ns->prp1 = op_buf; - return count; - } - - /* Every request has to be page aligned */ - if (base & ~NVME_PAGE_MASK) - return 0; - - /* Make sure a full block fits into the last chunk */ - if (size & (ns->block_size - 1ULL)) - return 0; - - for (; size > 0; base += NVME_PAGE_SIZE, size -= NVME_PAGE_SIZE) { - if (first_page) { - /* First page is special */ - ns->prp1 = (void*)base; - first_page = 0; - continue; - } - if (nvme_add_prpl(ns, base)) - return 0; - } - - return count; -} - -static int -nvme_create_io_queues(struct nvme_ctrl *ctrl) -{ - if (nvme_create_io_cq(ctrl, &ctrl->io_cq, 3)) - goto err; - - if (nvme_create_io_sq(ctrl, &ctrl->io_sq, 2, &ctrl->io_cq)) - goto err_free_cq; - - return 0; - - err_free_cq: - nvme_destroy_cq(&ctrl->io_cq); - err: - return -1; -} - -/* Waits for CSTS.RDY to match rdy. Returns 0 on success. */ -static int -nvme_wait_csts_rdy(struct nvme_ctrl *ctrl, unsigned rdy) -{ - u32 const max_to = 500 /* ms */ * ((ctrl->reg->cap >> 24) & 0xFFU); - u32 to = timer_calc(max_to); - u32 csts; - - while (rdy != ((csts = ctrl->reg->csts) & NVME_CSTS_RDY)) { - yield(); - - if (csts & NVME_CSTS_FATAL) { - dprintf(3, "NVMe fatal error during controller shutdown\n"); - return -1; - } - - if (timer_check(to)) { - warn_timeout(); - return -1; - } - } - - return 0; -} - -/* Returns 0 on success. */ -static int -nvme_controller_enable(struct nvme_ctrl *ctrl) -{ - int rc; - - pci_enable_busmaster(ctrl->pci); - - /* Turn the controller off. */ - ctrl->reg->cc = 0; - if (nvme_wait_csts_rdy(ctrl, 0)) { - dprintf(2, "NVMe fatal error during controller shutdown\n"); - return -1; - } - - ctrl->doorbell_stride = 4U << ((ctrl->reg->cap >> 32) & 0xF); - - rc = nvme_init_cq(ctrl, &ctrl->admin_cq, 1, - NVME_PAGE_SIZE / sizeof(struct nvme_cqe)); - if (rc) { - return -1; - } - - rc = nvme_init_sq(ctrl, &ctrl->admin_sq, 0, - NVME_PAGE_SIZE / sizeof(struct nvme_sqe), &ctrl->admin_cq); - if (rc) { - goto err_destroy_admin_cq; - } - - ctrl->reg->aqa = ctrl->admin_cq.common.mask << 16 - | ctrl->admin_sq.common.mask; - - ctrl->reg->asq = (u32)ctrl->admin_sq.sqe; - ctrl->reg->acq = (u32)ctrl->admin_cq.cqe; - - dprintf(3, " admin submission queue: %p\n", ctrl->admin_sq.sqe); - dprintf(3, " admin completion queue: %p\n", ctrl->admin_cq.cqe); - - ctrl->reg->cc = NVME_CC_EN | (NVME_CQE_SIZE_LOG << 20) - | (NVME_SQE_SIZE_LOG << 16 /* IOSQES */); - - if (nvme_wait_csts_rdy(ctrl, 1)) { - dprintf(2, "NVMe fatal error while enabling controller\n"); - goto err_destroy_admin_sq; - } - - /* The admin queue is set up and the controller is ready. Let's figure out - what namespaces we have. */ - - struct nvme_identify_ctrl *identify = nvme_admin_identify_ctrl(ctrl); - - if (!identify) { - dprintf(2, "NVMe couldn't identify controller.\n"); - goto err_destroy_admin_sq; - } - - dprintf(3, "NVMe has %u namespace%s.\n", - identify->nn, (identify->nn == 1) ? "" : "s"); - - ctrl->ns_count = identify->nn; - free(identify); - - if ((ctrl->ns_count == 0) || nvme_create_io_queues(ctrl)) { - /* No point to continue, if the controller says it doesn't have - namespaces or we couldn't create I/O queues. */ - goto err_destroy_admin_sq; - } - - /* Populate namespace IDs */ - int ns_idx; - for (ns_idx = 0; ns_idx < ctrl->ns_count; ns_idx++) { - nvme_probe_ns(ctrl, ns_idx, identify->mdts); - } - - dprintf(3, "NVMe initialization complete!\n"); - return 0; - - err_destroy_admin_sq: - nvme_destroy_sq(&ctrl->admin_sq); - err_destroy_admin_cq: - nvme_destroy_cq(&ctrl->admin_cq); - return -1; -} - -/* Initialize an NVMe controller and detect its drives. */ -static void -nvme_controller_setup(void *opaque) -{ - u8 skip_nonbootable = is_bootprio_strict(); - struct pci_device *pci = opaque; - - if (skip_nonbootable && bootprio_find_pci_device(pci) < 0) { - dprintf(1, "skipping init of a non-bootable NVMe at %pP\n", - pci); - goto err; - } - - struct nvme_reg volatile *reg = pci_enable_membar(pci, PCI_BASE_ADDRESS_0); - if (!reg) - return; - - u32 version = reg->vs; - dprintf(3, "Found NVMe controller with version %u.%u.%u.\n", - version >> 16, (version >> 8) & 0xFF, version & 0xFF); - dprintf(3, " Capabilities %016llx\n", reg->cap); - - if (~reg->cap & NVME_CAP_CSS_NVME) { - dprintf(3, "Controller doesn't speak NVMe command set. Skipping.\n"); - goto err; - } - - struct nvme_ctrl *ctrl = malloc_high(sizeof(*ctrl)); - if (!ctrl) { - warn_noalloc(); - goto err; - } - - memset(ctrl, 0, sizeof(*ctrl)); - - ctrl->reg = reg; - ctrl->pci = pci; - - if (nvme_controller_enable(ctrl)) { - goto err_free_ctrl; - } - - return; - - err_free_ctrl: - free(ctrl); - err: - dprintf(2, "Failed to enable NVMe controller.\n"); -} - -// Locate and init NVMe controllers -static void -nvme_scan(void) -{ - // Scan PCI bus for NVMe adapters - struct pci_device *pci; - - foreachpci(pci) { - if (pci->class != PCI_CLASS_STORAGE_NVME) - continue; - if (pci->prog_if != 2 /* as of NVM 1.0e */) { - dprintf(3, "Found incompatble NVMe: prog-if=%02x\n", pci->prog_if); - continue; - } - - run_thread(nvme_controller_setup, pci); - } -} - -static int -nvme_cmd_readwrite(struct nvme_namespace *ns, struct disk_op_s *op, int write) -{ - int res = DISK_RET_SUCCESS; - u16 const max_blocks = NVME_PAGE_SIZE / ns->block_size; - u16 i, blocks; - - for (i = 0; i < op->count && res == DISK_RET_SUCCESS;) { - u16 blocks_remaining = op->count - i; - char *op_buf = op->buf_fl + i * ns->block_size; - - blocks = nvme_build_prpl(ns, op_buf, blocks_remaining); - if (blocks) { - res = nvme_io_readwrite(ns, op->lba + i, ns->prp1, blocks, write); - dprintf(5, "ns %u %s lba %llu+%u: %d\n", ns->ns_id, write ? "write" - : "read", - op->lba, blocks, res); - } else { - blocks = blocks_remaining < max_blocks ? blocks_remaining - : max_blocks; - - if (write) { - memcpy(ns->dma_buffer, op_buf, blocks * ns->block_size); - } - - res = nvme_io_readwrite(ns, op->lba + i, ns->dma_buffer, blocks, write); - dprintf(5, "ns %u %s lba %llu+%u: %d\n", ns->ns_id, write ? "write" - : "read", - op->lba + i, blocks, res); - - if (!write && res == DISK_RET_SUCCESS) { - memcpy(op_buf, ns->dma_buffer, blocks * ns->block_size); - } - } - - i += blocks; - } - - return res; -} - -int -nvme_process_op(struct disk_op_s *op) -{ - if (!CONFIG_NVME) - return DISK_RET_SUCCESS; - - struct nvme_namespace *ns = container_of(op->drive_fl, struct nvme_namespace, - drive); - - switch (op->command) { - case CMD_READ: - case CMD_WRITE: - return nvme_cmd_readwrite(ns, op, op->command == CMD_WRITE); - default: - return default_process_op(op); - } -} - -void -nvme_setup(void) -{ - ASSERT32FLAT(); - if (!CONFIG_NVME) - return; - - dprintf(3, "init nvme\n"); - nvme_scan(); -} - -/* EOF */ diff --git a/payloads/external/SeaBIOS/src/hw/nvme.h b/payloads/external/SeaBIOS/src/hw/nvme.h deleted file mode 100644 index 4dbb70ae..00000000 --- a/payloads/external/SeaBIOS/src/hw/nvme.h +++ /dev/null @@ -1,17 +0,0 @@ -// External interfaces for low level NVMe support -// -// Copyright 2017 Amazon.com, Inc. or its affiliates. -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#ifndef __NVME_H -#define __NVME_H - -#include "block.h" // struct disk_op_s - -void nvme_setup(void); -int nvme_process_op(struct disk_op_s *op); - -#endif - -/* EOF */ diff --git a/payloads/external/SeaBIOS/src/hw/pci.c b/payloads/external/SeaBIOS/src/hw/pci.c deleted file mode 100644 index 3df1dae4..00000000 --- a/payloads/external/SeaBIOS/src/hw/pci.c +++ /dev/null @@ -1,178 +0,0 @@ -// PCI config space access functions. -// -// Copyright (C) 2008 Kevin O'Connor <kevin@koconnor.net> -// Copyright (C) 2002 MandrakeSoft S.A. -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "output.h" // dprintf -#include "pci.h" // pci_config_writel -#include "pci_regs.h" // PCI_VENDOR_ID -#include "util.h" // udelay -#include "x86.h" // outl - -#define PORT_PCI_CMD 0x0cf8 -#define PORT_PCI_DATA 0x0cfc - -static u32 mmconfig; - -static void *mmconfig_addr(u16 bdf, u32 addr) -{ - return (void*)(mmconfig + ((u32)bdf << 12) + addr); -} - -static u32 ioconfig_cmd(u16 bdf, u32 addr) -{ - return 0x80000000 | (bdf << 8) | (addr & 0xfc); -} - -void pci_config_writel(u16 bdf, u32 addr, u32 val) -{ - if (!MODESEGMENT && mmconfig) { - writel(mmconfig_addr(bdf, addr), val); - } else { - outl(ioconfig_cmd(bdf, addr), PORT_PCI_CMD); - outl(val, PORT_PCI_DATA); - } -} - -void pci_config_writew(u16 bdf, u32 addr, u16 val) -{ - if (!MODESEGMENT && mmconfig) { - writew(mmconfig_addr(bdf, addr), val); - } else { - outl(ioconfig_cmd(bdf, addr), PORT_PCI_CMD); - outw(val, PORT_PCI_DATA + (addr & 2)); - } -} - -void pci_config_writeb(u16 bdf, u32 addr, u8 val) -{ - if (!MODESEGMENT && mmconfig) { - writeb(mmconfig_addr(bdf, addr), val); - } else { - outl(ioconfig_cmd(bdf, addr), PORT_PCI_CMD); - outb(val, PORT_PCI_DATA + (addr & 3)); - } -} - -u32 pci_config_readl(u16 bdf, u32 addr) -{ - if (!MODESEGMENT && mmconfig) { - return readl(mmconfig_addr(bdf, addr)); - } else { - outl(ioconfig_cmd(bdf, addr), PORT_PCI_CMD); - return inl(PORT_PCI_DATA); - } -} - -u16 pci_config_readw(u16 bdf, u32 addr) -{ - if (!MODESEGMENT && mmconfig) { - return readw(mmconfig_addr(bdf, addr)); - } else { - outl(ioconfig_cmd(bdf, addr), PORT_PCI_CMD); - return inw(PORT_PCI_DATA + (addr & 2)); - } -} - -u8 pci_config_readb(u16 bdf, u32 addr) -{ - if (!MODESEGMENT && mmconfig) { - return readb(mmconfig_addr(bdf, addr)); - } else { - outl(ioconfig_cmd(bdf, addr), PORT_PCI_CMD); - return inb(PORT_PCI_DATA + (addr & 3)); - } -} - -void -pci_config_maskw(u16 bdf, u32 addr, u16 off, u16 on) -{ - u16 val = pci_config_readw(bdf, addr); - val = (val & ~off) | on; - pci_config_writew(bdf, addr, val); -} - -void -pci_enable_mmconfig(u64 addr, const char *name) -{ - if (addr >= 0x100000000ll) - return; - dprintf(1, "PCIe: using %s mmconfig at 0x%llx\n", name, addr); - mmconfig = addr; -} - -u8 pci_find_capability(u16 bdf, u8 cap_id, u8 cap) -{ - int i; - u16 status = pci_config_readw(bdf, PCI_STATUS); - - if (!(status & PCI_STATUS_CAP_LIST)) - return 0; - - if (cap == 0) { - /* find first */ - cap = pci_config_readb(bdf, PCI_CAPABILITY_LIST); - } else { - /* find next */ - cap = pci_config_readb(bdf, cap + PCI_CAP_LIST_NEXT); - } - for (i = 0; cap && i <= 0xff; i++) { - if (pci_config_readb(bdf, cap + PCI_CAP_LIST_ID) == cap_id) - return cap; - cap = pci_config_readb(bdf, cap + PCI_CAP_LIST_NEXT); - } - - return 0; -} - -// Helper function for foreachbdf() macro - return next device -int -pci_next(int bdf, int bus) -{ - if (pci_bdf_to_fn(bdf) == 0 - && (pci_config_readb(bdf, PCI_HEADER_TYPE) & 0x80) == 0) - // Last found device wasn't a multi-function device - skip to - // the next device. - bdf += 8; - else - bdf += 1; - - for (;;) { - if (pci_bdf_to_bus(bdf) != bus) - return -1; - - u16 v = pci_config_readw(bdf, PCI_VENDOR_ID); - if (v != 0x0000 && v != 0xffff) - // Device is present. - return bdf; - - if (pci_bdf_to_fn(bdf) == 0) - bdf += 8; - else - bdf += 1; - } -} - -// Check if PCI is available at all -int -pci_probe_host(void) -{ - outl(0x80000000, PORT_PCI_CMD); - if (inl(PORT_PCI_CMD) != 0x80000000) { - dprintf(1, "Detected non-PCI system\n"); - return -1; - } - return 0; -} - -void -pci_reboot(void) -{ - u8 v = inb(PORT_PCI_REBOOT) & ~6; - outb(v|2, PORT_PCI_REBOOT); /* Request hard reset */ - udelay(50); - outb(v|6, PORT_PCI_REBOOT); /* Actually do the reset */ - udelay(50); -} diff --git a/payloads/external/SeaBIOS/src/hw/pci.h b/payloads/external/SeaBIOS/src/hw/pci.h deleted file mode 100644 index 01c51f70..00000000 --- a/payloads/external/SeaBIOS/src/hw/pci.h +++ /dev/null @@ -1,48 +0,0 @@ -#ifndef __PCI_H -#define __PCI_H - -#include "types.h" // u32 - -#define PORT_PCI_REBOOT 0x0cf9 - -static inline u8 pci_bdf_to_bus(u16 bdf) { - return bdf >> 8; -} -static inline u8 pci_bdf_to_devfn(u16 bdf) { - return bdf & 0xff; -} -static inline u16 pci_bdf_to_busdev(u16 bdf) { - return bdf & ~0x07; -} -static inline u8 pci_bdf_to_dev(u16 bdf) { - return (bdf >> 3) & 0x1f; -} -static inline u8 pci_bdf_to_fn(u16 bdf) { - return bdf & 0x07; -} -static inline u16 pci_to_bdf(int bus, int dev, int fn) { - return (bus<<8) | (dev<<3) | fn; -} -static inline u16 pci_bus_devfn_to_bdf(int bus, u16 devfn) { - return (bus << 8) | devfn; -} - -#define foreachbdf(BDF, BUS) \ - for (BDF=pci_next(pci_bus_devfn_to_bdf((BUS), 0)-1, (BUS)) \ - ; BDF >= 0 \ - ; BDF=pci_next(BDF, (BUS))) - -void pci_config_writel(u16 bdf, u32 addr, u32 val); -void pci_config_writew(u16 bdf, u32 addr, u16 val); -void pci_config_writeb(u16 bdf, u32 addr, u8 val); -u32 pci_config_readl(u16 bdf, u32 addr); -u16 pci_config_readw(u16 bdf, u32 addr); -u8 pci_config_readb(u16 bdf, u32 addr); -void pci_config_maskw(u16 bdf, u32 addr, u16 off, u16 on); -void pci_enable_mmconfig(u64 addr, const char *name); -u8 pci_find_capability(u16 bdf, u8 cap_id, u8 cap); -int pci_next(int bdf, int bus); -int pci_probe_host(void); -void pci_reboot(void); - -#endif // pci.h diff --git a/payloads/external/SeaBIOS/src/hw/pci_ids.h b/payloads/external/SeaBIOS/src/hw/pci_ids.h deleted file mode 100644 index 10964616..00000000 --- a/payloads/external/SeaBIOS/src/hw/pci_ids.h +++ /dev/null @@ -1,2632 +0,0 @@ -/* - * PCI Class, Vendor and Device IDs - * - * Please keep sorted. - */ - -/* Device classes and subclasses */ - -#define PCI_CLASS_NOT_DEFINED 0x0000 -#define PCI_CLASS_NOT_DEFINED_VGA 0x0001 - -#define PCI_BASE_CLASS_STORAGE 0x01 -#define PCI_CLASS_STORAGE_SCSI 0x0100 -#define PCI_CLASS_STORAGE_IDE 0x0101 -#define PCI_CLASS_STORAGE_FLOPPY 0x0102 -#define PCI_CLASS_STORAGE_IPI 0x0103 -#define PCI_CLASS_STORAGE_RAID 0x0104 -#define PCI_CLASS_STORAGE_SATA 0x0106 -#define PCI_CLASS_STORAGE_SATA_AHCI 0x010601 -#define PCI_CLASS_STORAGE_SAS 0x0107 -#define PCI_CLASS_STORAGE_NVME 0x0108 -#define PCI_CLASS_STORAGE_OTHER 0x0180 - -#define PCI_BASE_CLASS_NETWORK 0x02 -#define PCI_CLASS_NETWORK_ETHERNET 0x0200 -#define PCI_CLASS_NETWORK_TOKEN_RING 0x0201 -#define PCI_CLASS_NETWORK_FDDI 0x0202 -#define PCI_CLASS_NETWORK_ATM 0x0203 -#define PCI_CLASS_NETWORK_OTHER 0x0280 - -#define PCI_BASE_CLASS_DISPLAY 0x03 -#define PCI_CLASS_DISPLAY_VGA 0x0300 -#define PCI_CLASS_DISPLAY_XGA 0x0301 -#define PCI_CLASS_DISPLAY_3D 0x0302 -#define PCI_CLASS_DISPLAY_OTHER 0x0380 - -#define PCI_BASE_CLASS_MULTIMEDIA 0x04 -#define PCI_CLASS_MULTIMEDIA_VIDEO 0x0400 -#define PCI_CLASS_MULTIMEDIA_AUDIO 0x0401 -#define PCI_CLASS_MULTIMEDIA_PHONE 0x0402 -#define PCI_CLASS_MULTIMEDIA_OTHER 0x0480 - -#define PCI_BASE_CLASS_MEMORY 0x05 -#define PCI_CLASS_MEMORY_RAM 0x0500 -#define PCI_CLASS_MEMORY_FLASH 0x0501 -#define PCI_CLASS_MEMORY_OTHER 0x0580 - -#define PCI_BASE_CLASS_BRIDGE 0x06 -#define PCI_CLASS_BRIDGE_HOST 0x0600 -#define PCI_CLASS_BRIDGE_ISA 0x0601 -#define PCI_CLASS_BRIDGE_EISA 0x0602 -#define PCI_CLASS_BRIDGE_MC 0x0603 -#define PCI_CLASS_BRIDGE_PCI 0x0604 -#define PCI_CLASS_BRIDGE_PCMCIA 0x0605 -#define PCI_CLASS_BRIDGE_NUBUS 0x0606 -#define PCI_CLASS_BRIDGE_CARDBUS 0x0607 -#define PCI_CLASS_BRIDGE_RACEWAY 0x0608 -#define PCI_CLASS_BRIDGE_OTHER 0x0680 - -#define PCI_BASE_CLASS_COMMUNICATION 0x07 -#define PCI_CLASS_COMMUNICATION_SERIAL 0x0700 -#define PCI_CLASS_COMMUNICATION_PARALLEL 0x0701 -#define PCI_CLASS_COMMUNICATION_MULTISERIAL 0x0702 -#define PCI_CLASS_COMMUNICATION_MODEM 0x0703 -#define PCI_CLASS_COMMUNICATION_OTHER 0x0780 - -#define PCI_BASE_CLASS_SYSTEM 0x08 -#define PCI_CLASS_SYSTEM_PIC 0x0800 -#define PCI_CLASS_SYSTEM_PIC_IOAPIC 0x080010 -#define PCI_CLASS_SYSTEM_PIC_IOXAPIC 0x080020 -#define PCI_CLASS_SYSTEM_DMA 0x0801 -#define PCI_CLASS_SYSTEM_TIMER 0x0802 -#define PCI_CLASS_SYSTEM_RTC 0x0803 -#define PCI_CLASS_SYSTEM_PCI_HOTPLUG 0x0804 -#define PCI_CLASS_SYSTEM_SDHCI 0x0805 -#define PCI_CLASS_SYSTEM_OTHER 0x0880 - -#define PCI_BASE_CLASS_INPUT 0x09 -#define PCI_CLASS_INPUT_KEYBOARD 0x0900 -#define PCI_CLASS_INPUT_PEN 0x0901 -#define PCI_CLASS_INPUT_MOUSE 0x0902 -#define PCI_CLASS_INPUT_SCANNER 0x0903 -#define PCI_CLASS_INPUT_GAMEPORT 0x0904 -#define PCI_CLASS_INPUT_OTHER 0x0980 - -#define PCI_BASE_CLASS_DOCKING 0x0a -#define PCI_CLASS_DOCKING_GENERIC 0x0a00 -#define PCI_CLASS_DOCKING_OTHER 0x0a80 - -#define PCI_BASE_CLASS_PROCESSOR 0x0b -#define PCI_CLASS_PROCESSOR_386 0x0b00 -#define PCI_CLASS_PROCESSOR_486 0x0b01 -#define PCI_CLASS_PROCESSOR_PENTIUM 0x0b02 -#define PCI_CLASS_PROCESSOR_ALPHA 0x0b10 -#define PCI_CLASS_PROCESSOR_POWERPC 0x0b20 -#define PCI_CLASS_PROCESSOR_MIPS 0x0b30 -#define PCI_CLASS_PROCESSOR_CO 0x0b40 - -#define PCI_BASE_CLASS_SERIAL 0x0c -#define PCI_CLASS_SERIAL_FIREWIRE 0x0c00 -#define PCI_CLASS_SERIAL_FIREWIRE_OHCI 0x0c0010 -#define PCI_CLASS_SERIAL_ACCESS 0x0c01 -#define PCI_CLASS_SERIAL_SSA 0x0c02 -#define PCI_CLASS_SERIAL_USB 0x0c03 -#define PCI_CLASS_SERIAL_USB_UHCI 0x0c0300 -#define PCI_CLASS_SERIAL_USB_OHCI 0x0c0310 -#define PCI_CLASS_SERIAL_USB_EHCI 0x0c0320 -#define PCI_CLASS_SERIAL_USB_XHCI 0x0c0330 -#define PCI_CLASS_SERIAL_FIBER 0x0c04 -#define PCI_CLASS_SERIAL_SMBUS 0x0c05 - -#define PCI_BASE_CLASS_WIRELESS 0x0d -#define PCI_CLASS_WIRELESS_RF_CONTROLLER 0x0d10 -#define PCI_CLASS_WIRELESS_WHCI 0x0d1010 - -#define PCI_BASE_CLASS_INTELLIGENT 0x0e -#define PCI_CLASS_INTELLIGENT_I2O 0x0e00 - -#define PCI_BASE_CLASS_SATELLITE 0x0f -#define PCI_CLASS_SATELLITE_TV 0x0f00 -#define PCI_CLASS_SATELLITE_AUDIO 0x0f01 -#define PCI_CLASS_SATELLITE_VOICE 0x0f03 -#define PCI_CLASS_SATELLITE_DATA 0x0f04 - -#define PCI_BASE_CLASS_CRYPT 0x10 -#define PCI_CLASS_CRYPT_NETWORK 0x1000 -#define PCI_CLASS_CRYPT_ENTERTAINMENT 0x1001 -#define PCI_CLASS_CRYPT_OTHER 0x1080 - -#define PCI_BASE_CLASS_SIGNAL_PROCESSING 0x11 -#define PCI_CLASS_SP_DPIO 0x1100 -#define PCI_CLASS_SP_OTHER 0x1180 - -#define PCI_CLASS_OTHERS 0xff - -/* Vendors and devices. Sort key: vendor first, device next. */ - -#define PCI_VENDOR_ID_TTTECH 0x0357 -#define PCI_DEVICE_ID_TTTECH_MC322 0x000a - -#define PCI_VENDOR_ID_DYNALINK 0x0675 -#define PCI_DEVICE_ID_DYNALINK_IS64PH 0x1702 - -#define PCI_VENDOR_ID_BERKOM 0x0871 -#define PCI_DEVICE_ID_BERKOM_A1T 0xffa1 -#define PCI_DEVICE_ID_BERKOM_T_CONCEPT 0xffa2 -#define PCI_DEVICE_ID_BERKOM_A4T 0xffa4 -#define PCI_DEVICE_ID_BERKOM_SCITEL_QUADRO 0xffa8 - -#define PCI_VENDOR_ID_COMPAQ 0x0e11 -#define PCI_DEVICE_ID_COMPAQ_TOKENRING 0x0508 -#define PCI_DEVICE_ID_COMPAQ_TACHYON 0xa0fc -#define PCI_DEVICE_ID_COMPAQ_SMART2P 0xae10 -#define PCI_DEVICE_ID_COMPAQ_NETEL100 0xae32 -#define PCI_DEVICE_ID_COMPAQ_NETEL10 0xae34 -#define PCI_DEVICE_ID_COMPAQ_TRIFLEX_IDE 0xae33 -#define PCI_DEVICE_ID_COMPAQ_NETFLEX3I 0xae35 -#define PCI_DEVICE_ID_COMPAQ_NETEL100D 0xae40 -#define PCI_DEVICE_ID_COMPAQ_NETEL100PI 0xae43 -#define PCI_DEVICE_ID_COMPAQ_NETEL100I 0xb011 -#define PCI_DEVICE_ID_COMPAQ_CISS 0xb060 -#define PCI_DEVICE_ID_COMPAQ_CISSB 0xb178 -#define PCI_DEVICE_ID_COMPAQ_CISSC 0x46 -#define PCI_DEVICE_ID_COMPAQ_THUNDER 0xf130 -#define PCI_DEVICE_ID_COMPAQ_NETFLEX3B 0xf150 - -#define PCI_VENDOR_ID_NCR 0x1000 -#define PCI_VENDOR_ID_LSI_LOGIC 0x1000 -#define PCI_DEVICE_ID_NCR_53C810 0x0001 -#define PCI_DEVICE_ID_NCR_53C820 0x0002 -#define PCI_DEVICE_ID_NCR_53C825 0x0003 -#define PCI_DEVICE_ID_NCR_53C815 0x0004 -#define PCI_DEVICE_ID_LSI_53C810AP 0x0005 -#define PCI_DEVICE_ID_NCR_53C860 0x0006 -#define PCI_DEVICE_ID_LSI_53C1510 0x000a -#define PCI_DEVICE_ID_NCR_53C896 0x000b -#define PCI_DEVICE_ID_NCR_53C895 0x000c -#define PCI_DEVICE_ID_NCR_53C885 0x000d -#define PCI_DEVICE_ID_NCR_53C875 0x000f -#define PCI_DEVICE_ID_NCR_53C1510 0x0010 -#define PCI_DEVICE_ID_LSI_53C895A 0x0012 -#define PCI_DEVICE_ID_LSI_53C875A 0x0013 -#define PCI_DEVICE_ID_LSI_53C1010_33 0x0020 -#define PCI_DEVICE_ID_LSI_53C1010_66 0x0021 -#define PCI_DEVICE_ID_LSI_53C1030 0x0030 -#define PCI_DEVICE_ID_LSI_1030_53C1035 0x0032 -#define PCI_DEVICE_ID_LSI_53C1035 0x0040 -#define PCI_DEVICE_ID_NCR_53C875J 0x008f -#define PCI_DEVICE_ID_LSI_FC909 0x0621 -#define PCI_DEVICE_ID_LSI_FC929 0x0622 -#define PCI_DEVICE_ID_LSI_FC929_LAN 0x0623 -#define PCI_DEVICE_ID_LSI_FC919 0x0624 -#define PCI_DEVICE_ID_LSI_FC919_LAN 0x0625 -#define PCI_DEVICE_ID_LSI_FC929X 0x0626 -#define PCI_DEVICE_ID_LSI_FC939X 0x0642 -#define PCI_DEVICE_ID_LSI_FC949X 0x0640 -#define PCI_DEVICE_ID_LSI_FC949ES 0x0646 -#define PCI_DEVICE_ID_LSI_FC919X 0x0628 -#define PCI_DEVICE_ID_NCR_YELLOWFIN 0x0701 -#define PCI_DEVICE_ID_LSI_61C102 0x0901 -#define PCI_DEVICE_ID_LSI_63C815 0x1000 -#define PCI_DEVICE_ID_LSI_SAS1064 0x0050 -#define PCI_DEVICE_ID_LSI_SAS1064R 0x0411 -#define PCI_DEVICE_ID_LSI_VERDE_ZCR 0x0413 -#define PCI_DEVICE_ID_LSI_SAS1066 0x005E -#define PCI_DEVICE_ID_LSI_SAS1068 0x0054 -#define PCI_DEVICE_ID_LSI_SAS1064A 0x005C -#define PCI_DEVICE_ID_LSI_SAS1064E 0x0056 -#define PCI_DEVICE_ID_LSI_SAS1066E 0x005A -#define PCI_DEVICE_ID_LSI_SAS1068E 0x0058 -#define PCI_DEVICE_ID_LSI_SAS1078 0x0060 -#define PCI_DEVICE_ID_LSI_SAS1078DE 0x007C -#define PCI_DEVICE_ID_LSI_SAS2108E 0x0078 -#define PCI_DEVICE_ID_LSI_SAS2108 0x0079 -#define PCI_DEVICE_ID_LSI_SAS2208 0x005B -#define PCI_DEVICE_ID_LSI_SAS3108 0x005D -#define PCI_DEVICE_ID_LSI_SAS2004 0x0071 -#define PCI_DEVICE_ID_LSI_SAS2008 0x0073 - -#define PCI_VENDOR_ID_ATI 0x1002 -/* Mach64 */ -#define PCI_DEVICE_ID_ATI_68800 0x4158 -#define PCI_DEVICE_ID_ATI_215CT222 0x4354 -#define PCI_DEVICE_ID_ATI_210888CX 0x4358 -#define PCI_DEVICE_ID_ATI_215ET222 0x4554 -/* Mach64 / Rage */ -#define PCI_DEVICE_ID_ATI_215GB 0x4742 -#define PCI_DEVICE_ID_ATI_215GD 0x4744 -#define PCI_DEVICE_ID_ATI_215GI 0x4749 -#define PCI_DEVICE_ID_ATI_215GP 0x4750 -#define PCI_DEVICE_ID_ATI_215GQ 0x4751 -#define PCI_DEVICE_ID_ATI_215XL 0x4752 -#define PCI_DEVICE_ID_ATI_215GT 0x4754 -#define PCI_DEVICE_ID_ATI_215GTB 0x4755 -#define PCI_DEVICE_ID_ATI_215_IV 0x4756 -#define PCI_DEVICE_ID_ATI_215_IW 0x4757 -#define PCI_DEVICE_ID_ATI_215_IZ 0x475A -#define PCI_DEVICE_ID_ATI_210888GX 0x4758 -#define PCI_DEVICE_ID_ATI_215_LB 0x4c42 -#define PCI_DEVICE_ID_ATI_215_LD 0x4c44 -#define PCI_DEVICE_ID_ATI_215_LG 0x4c47 -#define PCI_DEVICE_ID_ATI_215_LI 0x4c49 -#define PCI_DEVICE_ID_ATI_215_LM 0x4c4D -#define PCI_DEVICE_ID_ATI_215_LN 0x4c4E -#define PCI_DEVICE_ID_ATI_215_LR 0x4c52 -#define PCI_DEVICE_ID_ATI_215_LS 0x4c53 -#define PCI_DEVICE_ID_ATI_264_LT 0x4c54 -/* Mach64 VT */ -#define PCI_DEVICE_ID_ATI_264VT 0x5654 -#define PCI_DEVICE_ID_ATI_264VU 0x5655 -#define PCI_DEVICE_ID_ATI_264VV 0x5656 -/* Rage128 GL */ -#define PCI_DEVICE_ID_ATI_RAGE128_RE 0x5245 -#define PCI_DEVICE_ID_ATI_RAGE128_RF 0x5246 -#define PCI_DEVICE_ID_ATI_RAGE128_RG 0x5247 -/* Rage128 VR */ -#define PCI_DEVICE_ID_ATI_RAGE128_RK 0x524b -#define PCI_DEVICE_ID_ATI_RAGE128_RL 0x524c -#define PCI_DEVICE_ID_ATI_RAGE128_SE 0x5345 -#define PCI_DEVICE_ID_ATI_RAGE128_SF 0x5346 -#define PCI_DEVICE_ID_ATI_RAGE128_SG 0x5347 -#define PCI_DEVICE_ID_ATI_RAGE128_SH 0x5348 -#define PCI_DEVICE_ID_ATI_RAGE128_SK 0x534b -#define PCI_DEVICE_ID_ATI_RAGE128_SL 0x534c -#define PCI_DEVICE_ID_ATI_RAGE128_SM 0x534d -#define PCI_DEVICE_ID_ATI_RAGE128_SN 0x534e -/* Rage128 Ultra */ -#define PCI_DEVICE_ID_ATI_RAGE128_TF 0x5446 -#define PCI_DEVICE_ID_ATI_RAGE128_TL 0x544c -#define PCI_DEVICE_ID_ATI_RAGE128_TR 0x5452 -#define PCI_DEVICE_ID_ATI_RAGE128_TS 0x5453 -#define PCI_DEVICE_ID_ATI_RAGE128_TT 0x5454 -#define PCI_DEVICE_ID_ATI_RAGE128_TU 0x5455 -/* Rage128 M3 */ -#define PCI_DEVICE_ID_ATI_RAGE128_LE 0x4c45 -#define PCI_DEVICE_ID_ATI_RAGE128_LF 0x4c46 -/* Rage128 M4 */ -#define PCI_DEVICE_ID_ATI_RAGE128_MF 0x4d46 -#define PCI_DEVICE_ID_ATI_RAGE128_ML 0x4d4c -/* Rage128 Pro GL */ -#define PCI_DEVICE_ID_ATI_RAGE128_PA 0x5041 -#define PCI_DEVICE_ID_ATI_RAGE128_PB 0x5042 -#define PCI_DEVICE_ID_ATI_RAGE128_PC 0x5043 -#define PCI_DEVICE_ID_ATI_RAGE128_PD 0x5044 -#define PCI_DEVICE_ID_ATI_RAGE128_PE 0x5045 -#define PCI_DEVICE_ID_ATI_RAGE128_PF 0x5046 -/* Rage128 Pro VR */ -#define PCI_DEVICE_ID_ATI_RAGE128_PG 0x5047 -#define PCI_DEVICE_ID_ATI_RAGE128_PH 0x5048 -#define PCI_DEVICE_ID_ATI_RAGE128_PI 0x5049 -#define PCI_DEVICE_ID_ATI_RAGE128_PJ 0x504A -#define PCI_DEVICE_ID_ATI_RAGE128_PK 0x504B -#define PCI_DEVICE_ID_ATI_RAGE128_PL 0x504C -#define PCI_DEVICE_ID_ATI_RAGE128_PM 0x504D -#define PCI_DEVICE_ID_ATI_RAGE128_PN 0x504E -#define PCI_DEVICE_ID_ATI_RAGE128_PO 0x504F -#define PCI_DEVICE_ID_ATI_RAGE128_PP 0x5050 -#define PCI_DEVICE_ID_ATI_RAGE128_PQ 0x5051 -#define PCI_DEVICE_ID_ATI_RAGE128_PR 0x5052 -#define PCI_DEVICE_ID_ATI_RAGE128_PS 0x5053 -#define PCI_DEVICE_ID_ATI_RAGE128_PT 0x5054 -#define PCI_DEVICE_ID_ATI_RAGE128_PU 0x5055 -#define PCI_DEVICE_ID_ATI_RAGE128_PV 0x5056 -#define PCI_DEVICE_ID_ATI_RAGE128_PW 0x5057 -#define PCI_DEVICE_ID_ATI_RAGE128_PX 0x5058 -/* Rage128 M4 */ -/* Radeon R100 */ -#define PCI_DEVICE_ID_ATI_RADEON_QD 0x5144 -#define PCI_DEVICE_ID_ATI_RADEON_QE 0x5145 -#define PCI_DEVICE_ID_ATI_RADEON_QF 0x5146 -#define PCI_DEVICE_ID_ATI_RADEON_QG 0x5147 -/* Radeon RV100 (VE) */ -#define PCI_DEVICE_ID_ATI_RADEON_QY 0x5159 -#define PCI_DEVICE_ID_ATI_RADEON_QZ 0x515a -/* Radeon R200 (8500) */ -#define PCI_DEVICE_ID_ATI_RADEON_QL 0x514c -#define PCI_DEVICE_ID_ATI_RADEON_QN 0x514e -#define PCI_DEVICE_ID_ATI_RADEON_QO 0x514f -#define PCI_DEVICE_ID_ATI_RADEON_Ql 0x516c -#define PCI_DEVICE_ID_ATI_RADEON_BB 0x4242 -/* Radeon R200 (9100) */ -#define PCI_DEVICE_ID_ATI_RADEON_QM 0x514d -/* Radeon RV200 (7500) */ -#define PCI_DEVICE_ID_ATI_RADEON_QW 0x5157 -#define PCI_DEVICE_ID_ATI_RADEON_QX 0x5158 -/* Radeon NV-100 */ -/* Radeon RV250 (9000) */ -#define PCI_DEVICE_ID_ATI_RADEON_Id 0x4964 -#define PCI_DEVICE_ID_ATI_RADEON_Ie 0x4965 -#define PCI_DEVICE_ID_ATI_RADEON_If 0x4966 -#define PCI_DEVICE_ID_ATI_RADEON_Ig 0x4967 -/* Radeon RV280 (9200) */ -#define PCI_DEVICE_ID_ATI_RADEON_Ya 0x5961 -#define PCI_DEVICE_ID_ATI_RADEON_Yd 0x5964 -/* Radeon R300 (9500) */ -/* Radeon R300 (9700) */ -#define PCI_DEVICE_ID_ATI_RADEON_ND 0x4e44 -#define PCI_DEVICE_ID_ATI_RADEON_NE 0x4e45 -#define PCI_DEVICE_ID_ATI_RADEON_NF 0x4e46 -#define PCI_DEVICE_ID_ATI_RADEON_NG 0x4e47 -/* Radeon R350 (9800) */ -/* Radeon RV350 (9600) */ -/* Radeon M6 */ -#define PCI_DEVICE_ID_ATI_RADEON_LY 0x4c59 -#define PCI_DEVICE_ID_ATI_RADEON_LZ 0x4c5a -/* Radeon M7 */ -#define PCI_DEVICE_ID_ATI_RADEON_LW 0x4c57 -#define PCI_DEVICE_ID_ATI_RADEON_LX 0x4c58 -/* Radeon M9 */ -#define PCI_DEVICE_ID_ATI_RADEON_Ld 0x4c64 -#define PCI_DEVICE_ID_ATI_RADEON_Le 0x4c65 -#define PCI_DEVICE_ID_ATI_RADEON_Lf 0x4c66 -#define PCI_DEVICE_ID_ATI_RADEON_Lg 0x4c67 -/* Radeon */ -/* RadeonIGP */ -#define PCI_DEVICE_ID_ATI_RS100 0xcab0 -#define PCI_DEVICE_ID_ATI_RS200 0xcab2 -#define PCI_DEVICE_ID_ATI_RS200_B 0xcbb2 -#define PCI_DEVICE_ID_ATI_RS250 0xcab3 -#define PCI_DEVICE_ID_ATI_RS300_100 0x5830 -#define PCI_DEVICE_ID_ATI_RS300_133 0x5831 -#define PCI_DEVICE_ID_ATI_RS300_166 0x5832 -#define PCI_DEVICE_ID_ATI_RS300_200 0x5833 -#define PCI_DEVICE_ID_ATI_RS350_100 0x7830 -#define PCI_DEVICE_ID_ATI_RS350_133 0x7831 -#define PCI_DEVICE_ID_ATI_RS350_166 0x7832 -#define PCI_DEVICE_ID_ATI_RS350_200 0x7833 -#define PCI_DEVICE_ID_ATI_RS400_100 0x5a30 -#define PCI_DEVICE_ID_ATI_RS400_133 0x5a31 -#define PCI_DEVICE_ID_ATI_RS400_166 0x5a32 -#define PCI_DEVICE_ID_ATI_RS400_200 0x5a33 -#define PCI_DEVICE_ID_ATI_RS480 0x5950 -/* ATI IXP Chipset */ -#define PCI_DEVICE_ID_ATI_IXP200_IDE 0x4349 -#define PCI_DEVICE_ID_ATI_IXP200_SMBUS 0x4353 -#define PCI_DEVICE_ID_ATI_IXP300_SMBUS 0x4363 -#define PCI_DEVICE_ID_ATI_IXP300_IDE 0x4369 -#define PCI_DEVICE_ID_ATI_IXP300_SATA 0x436e -#define PCI_DEVICE_ID_ATI_IXP400_SMBUS 0x4372 -#define PCI_DEVICE_ID_ATI_IXP400_IDE 0x4376 -#define PCI_DEVICE_ID_ATI_IXP400_SATA 0x4379 -#define PCI_DEVICE_ID_ATI_IXP400_SATA2 0x437a -#define PCI_DEVICE_ID_ATI_IXP600_SATA 0x4380 -#define PCI_DEVICE_ID_ATI_SBX00_SMBUS 0x4385 -#define PCI_DEVICE_ID_ATI_IXP600_IDE 0x438c -#define PCI_DEVICE_ID_ATI_IXP700_SATA 0x4390 -#define PCI_DEVICE_ID_ATI_IXP700_IDE 0x439c - -#define PCI_VENDOR_ID_VLSI 0x1004 -#define PCI_DEVICE_ID_VLSI_82C592 0x0005 -#define PCI_DEVICE_ID_VLSI_82C593 0x0006 -#define PCI_DEVICE_ID_VLSI_82C594 0x0007 -#define PCI_DEVICE_ID_VLSI_82C597 0x0009 -#define PCI_DEVICE_ID_VLSI_82C541 0x000c -#define PCI_DEVICE_ID_VLSI_82C543 0x000d -#define PCI_DEVICE_ID_VLSI_82C532 0x0101 -#define PCI_DEVICE_ID_VLSI_82C534 0x0102 -#define PCI_DEVICE_ID_VLSI_82C535 0x0104 -#define PCI_DEVICE_ID_VLSI_82C147 0x0105 -#define PCI_DEVICE_ID_VLSI_VAS96011 0x0702 - -#define PCI_VENDOR_ID_ADL 0x1005 -#define PCI_DEVICE_ID_ADL_2301 0x2301 - -#define PCI_VENDOR_ID_NS 0x100b -#define PCI_DEVICE_ID_NS_87415 0x0002 -#define PCI_DEVICE_ID_NS_87560_LIO 0x000e -#define PCI_DEVICE_ID_NS_87560_USB 0x0012 -#define PCI_DEVICE_ID_NS_83815 0x0020 -#define PCI_DEVICE_ID_NS_83820 0x0022 -#define PCI_DEVICE_ID_NS_CS5535_ISA 0x002b -#define PCI_DEVICE_ID_NS_CS5535_IDE 0x002d -#define PCI_DEVICE_ID_NS_CS5535_AUDIO 0x002e -#define PCI_DEVICE_ID_NS_CS5535_USB 0x002f -#define PCI_DEVICE_ID_NS_GX_VIDEO 0x0030 -#define PCI_DEVICE_ID_NS_SATURN 0x0035 -#define PCI_DEVICE_ID_NS_SCx200_BRIDGE 0x0500 -#define PCI_DEVICE_ID_NS_SCx200_SMI 0x0501 -#define PCI_DEVICE_ID_NS_SCx200_IDE 0x0502 -#define PCI_DEVICE_ID_NS_SCx200_AUDIO 0x0503 -#define PCI_DEVICE_ID_NS_SCx200_VIDEO 0x0504 -#define PCI_DEVICE_ID_NS_SCx200_XBUS 0x0505 -#define PCI_DEVICE_ID_NS_SC1100_BRIDGE 0x0510 -#define PCI_DEVICE_ID_NS_SC1100_SMI 0x0511 -#define PCI_DEVICE_ID_NS_SC1100_XBUS 0x0515 -#define PCI_DEVICE_ID_NS_87410 0xd001 - -#define PCI_DEVICE_ID_NS_GX_HOST_BRIDGE 0x0028 - -#define PCI_VENDOR_ID_TSENG 0x100c -#define PCI_DEVICE_ID_TSENG_W32P_2 0x3202 -#define PCI_DEVICE_ID_TSENG_W32P_b 0x3205 -#define PCI_DEVICE_ID_TSENG_W32P_c 0x3206 -#define PCI_DEVICE_ID_TSENG_W32P_d 0x3207 -#define PCI_DEVICE_ID_TSENG_ET6000 0x3208 - -#define PCI_VENDOR_ID_WEITEK 0x100e -#define PCI_DEVICE_ID_WEITEK_P9000 0x9001 -#define PCI_DEVICE_ID_WEITEK_P9100 0x9100 - -#define PCI_VENDOR_ID_DEC 0x1011 -#define PCI_DEVICE_ID_DEC_BRD 0x0001 -#define PCI_DEVICE_ID_DEC_TULIP 0x0002 -#define PCI_DEVICE_ID_DEC_TGA 0x0004 -#define PCI_DEVICE_ID_DEC_TULIP_FAST 0x0009 -#define PCI_DEVICE_ID_DEC_TGA2 0x000D -#define PCI_DEVICE_ID_DEC_FDDI 0x000F -#define PCI_DEVICE_ID_DEC_TULIP_PLUS 0x0014 -#define PCI_DEVICE_ID_DEC_21142 0x0019 -#define PCI_DEVICE_ID_DEC_21052 0x0021 -#define PCI_DEVICE_ID_DEC_21150 0x0022 -#define PCI_DEVICE_ID_DEC_21152 0x0024 -#define PCI_DEVICE_ID_DEC_21153 0x0025 -#define PCI_DEVICE_ID_DEC_21154 0x0026 -#define PCI_DEVICE_ID_DEC_21285 0x1065 -#define PCI_DEVICE_ID_COMPAQ_42XX 0x0046 - -#define PCI_VENDOR_ID_CIRRUS 0x1013 -#define PCI_DEVICE_ID_CIRRUS_7548 0x0038 -#define PCI_DEVICE_ID_CIRRUS_5430 0x00a0 -#define PCI_DEVICE_ID_CIRRUS_5434_4 0x00a4 -#define PCI_DEVICE_ID_CIRRUS_5434_8 0x00a8 -#define PCI_DEVICE_ID_CIRRUS_5436 0x00ac -#define PCI_DEVICE_ID_CIRRUS_5446 0x00b8 -#define PCI_DEVICE_ID_CIRRUS_5480 0x00bc -#define PCI_DEVICE_ID_CIRRUS_5462 0x00d0 -#define PCI_DEVICE_ID_CIRRUS_5464 0x00d4 -#define PCI_DEVICE_ID_CIRRUS_5465 0x00d6 -#define PCI_DEVICE_ID_CIRRUS_6729 0x1100 -#define PCI_DEVICE_ID_CIRRUS_6832 0x1110 -#define PCI_DEVICE_ID_CIRRUS_7543 0x1202 -#define PCI_DEVICE_ID_CIRRUS_4610 0x6001 -#define PCI_DEVICE_ID_CIRRUS_4612 0x6003 -#define PCI_DEVICE_ID_CIRRUS_4615 0x6004 - -#define PCI_VENDOR_ID_IBM 0x1014 -#define PCI_DEVICE_ID_IBM_TR 0x0018 -#define PCI_DEVICE_ID_IBM_TR_WAKE 0x003e -#define PCI_DEVICE_ID_IBM_CPC710_PCI64 0x00fc -#define PCI_DEVICE_ID_IBM_SNIPE 0x0180 -#define PCI_DEVICE_ID_IBM_CITRINE 0x028C -#define PCI_DEVICE_ID_IBM_GEMSTONE 0xB166 -#define PCI_DEVICE_ID_IBM_OBSIDIAN 0x02BD -#define PCI_DEVICE_ID_IBM_ICOM_DEV_ID_1 0x0031 -#define PCI_DEVICE_ID_IBM_ICOM_DEV_ID_2 0x0219 -#define PCI_DEVICE_ID_IBM_ICOM_V2_TWO_PORTS_RVX 0x021A -#define PCI_DEVICE_ID_IBM_ICOM_V2_ONE_PORT_RVX_ONE_PORT_MDM 0x0251 -#define PCI_DEVICE_ID_IBM_ICOM_V2_ONE_PORT_RVX_ONE_PORT_MDM_PCIE 0x0361 -#define PCI_DEVICE_ID_IBM_ICOM_FOUR_PORT_MODEL 0x252 - -#define PCI_VENDOR_ID_UNISYS 0x1018 -#define PCI_DEVICE_ID_UNISYS_DMA_DIRECTOR 0x001C - -#define PCI_VENDOR_ID_COMPEX2 0x101a /* pci.ids says "AT&T GIS (NCR)" */ -#define PCI_DEVICE_ID_COMPEX2_100VG 0x0005 - -#define PCI_VENDOR_ID_WD 0x101c -#define PCI_DEVICE_ID_WD_90C 0xc24a - -#define PCI_VENDOR_ID_AMI 0x101e -#define PCI_DEVICE_ID_AMI_MEGARAID3 0x1960 -#define PCI_DEVICE_ID_AMI_MEGARAID 0x9010 -#define PCI_DEVICE_ID_AMI_MEGARAID2 0x9060 - -#define PCI_VENDOR_ID_AMD 0x1022 -#define PCI_DEVICE_ID_AMD_K8_NB 0x1100 -#define PCI_DEVICE_ID_AMD_K8_NB_ADDRMAP 0x1101 -#define PCI_DEVICE_ID_AMD_K8_NB_MEMCTL 0x1102 -#define PCI_DEVICE_ID_AMD_K8_NB_MISC 0x1103 -#define PCI_DEVICE_ID_AMD_10H_NB_HT 0x1200 -#define PCI_DEVICE_ID_AMD_10H_NB_MAP 0x1201 -#define PCI_DEVICE_ID_AMD_10H_NB_DRAM 0x1202 -#define PCI_DEVICE_ID_AMD_10H_NB_MISC 0x1203 -#define PCI_DEVICE_ID_AMD_10H_NB_LINK 0x1204 -#define PCI_DEVICE_ID_AMD_11H_NB_HT 0x1300 -#define PCI_DEVICE_ID_AMD_11H_NB_MAP 0x1301 -#define PCI_DEVICE_ID_AMD_11H_NB_DRAM 0x1302 -#define PCI_DEVICE_ID_AMD_11H_NB_MISC 0x1303 -#define PCI_DEVICE_ID_AMD_11H_NB_LINK 0x1304 -#define PCI_DEVICE_ID_AMD_LANCE 0x2000 -#define PCI_DEVICE_ID_AMD_LANCE_HOME 0x2001 -#define PCI_DEVICE_ID_AMD_SCSI 0x2020 -#define PCI_DEVICE_ID_AMD_SERENADE 0x36c0 -#define PCI_DEVICE_ID_AMD_FE_GATE_7006 0x7006 -#define PCI_DEVICE_ID_AMD_FE_GATE_7007 0x7007 -#define PCI_DEVICE_ID_AMD_FE_GATE_700C 0x700C -#define PCI_DEVICE_ID_AMD_FE_GATE_700E 0x700E -#define PCI_DEVICE_ID_AMD_COBRA_7401 0x7401 -#define PCI_DEVICE_ID_AMD_VIPER_7409 0x7409 -#define PCI_DEVICE_ID_AMD_VIPER_740B 0x740B -#define PCI_DEVICE_ID_AMD_VIPER_7410 0x7410 -#define PCI_DEVICE_ID_AMD_VIPER_7411 0x7411 -#define PCI_DEVICE_ID_AMD_VIPER_7413 0x7413 -#define PCI_DEVICE_ID_AMD_VIPER_7440 0x7440 -#define PCI_DEVICE_ID_AMD_OPUS_7441 0x7441 -#define PCI_DEVICE_ID_AMD_OPUS_7443 0x7443 -#define PCI_DEVICE_ID_AMD_VIPER_7443 0x7443 -#define PCI_DEVICE_ID_AMD_OPUS_7445 0x7445 -#define PCI_DEVICE_ID_AMD_8111_LPC 0x7468 -#define PCI_DEVICE_ID_AMD_8111_IDE 0x7469 -#define PCI_DEVICE_ID_AMD_8111_SMBUS2 0x746a -#define PCI_DEVICE_ID_AMD_8111_SMBUS 0x746b -#define PCI_DEVICE_ID_AMD_8111_AUDIO 0x746d -#define PCI_DEVICE_ID_AMD_8151_0 0x7454 -#define PCI_DEVICE_ID_AMD_8131_BRIDGE 0x7450 -#define PCI_DEVICE_ID_AMD_8131_APIC 0x7451 -#define PCI_DEVICE_ID_AMD_8132_BRIDGE 0x7458 -#define PCI_DEVICE_ID_AMD_CS5536_ISA 0x2090 -#define PCI_DEVICE_ID_AMD_CS5536_FLASH 0x2091 -#define PCI_DEVICE_ID_AMD_CS5536_AUDIO 0x2093 -#define PCI_DEVICE_ID_AMD_CS5536_OHC 0x2094 -#define PCI_DEVICE_ID_AMD_CS5536_EHC 0x2095 -#define PCI_DEVICE_ID_AMD_CS5536_UDC 0x2096 -#define PCI_DEVICE_ID_AMD_CS5536_UOC 0x2097 -#define PCI_DEVICE_ID_AMD_CS5536_IDE 0x209A - -#define PCI_DEVICE_ID_AMD_LX_VIDEO 0x2081 -#define PCI_DEVICE_ID_AMD_LX_AES 0x2082 - -#define PCI_VENDOR_ID_TRIDENT 0x1023 -#define PCI_DEVICE_ID_TRIDENT_4DWAVE_DX 0x2000 -#define PCI_DEVICE_ID_TRIDENT_4DWAVE_NX 0x2001 -#define PCI_DEVICE_ID_TRIDENT_9320 0x9320 -#define PCI_DEVICE_ID_TRIDENT_9388 0x9388 -#define PCI_DEVICE_ID_TRIDENT_9397 0x9397 -#define PCI_DEVICE_ID_TRIDENT_939A 0x939A -#define PCI_DEVICE_ID_TRIDENT_9520 0x9520 -#define PCI_DEVICE_ID_TRIDENT_9525 0x9525 -#define PCI_DEVICE_ID_TRIDENT_9420 0x9420 -#define PCI_DEVICE_ID_TRIDENT_9440 0x9440 -#define PCI_DEVICE_ID_TRIDENT_9660 0x9660 -#define PCI_DEVICE_ID_TRIDENT_9750 0x9750 -#define PCI_DEVICE_ID_TRIDENT_9850 0x9850 -#define PCI_DEVICE_ID_TRIDENT_9880 0x9880 -#define PCI_DEVICE_ID_TRIDENT_8400 0x8400 -#define PCI_DEVICE_ID_TRIDENT_8420 0x8420 -#define PCI_DEVICE_ID_TRIDENT_8500 0x8500 - -#define PCI_VENDOR_ID_AI 0x1025 -#define PCI_DEVICE_ID_AI_M1435 0x1435 - -#define PCI_VENDOR_ID_DELL 0x1028 -#define PCI_DEVICE_ID_DELL_RACIII 0x0008 -#define PCI_DEVICE_ID_DELL_RAC4 0x0012 -#define PCI_DEVICE_ID_DELL_PERC5 0x0015 - -#define PCI_VENDOR_ID_MATROX 0x102B -#define PCI_DEVICE_ID_MATROX_MGA_2 0x0518 -#define PCI_DEVICE_ID_MATROX_MIL 0x0519 -#define PCI_DEVICE_ID_MATROX_MYS 0x051A -#define PCI_DEVICE_ID_MATROX_MIL_2 0x051b -#define PCI_DEVICE_ID_MATROX_MYS_AGP 0x051e -#define PCI_DEVICE_ID_MATROX_MIL_2_AGP 0x051f -#define PCI_DEVICE_ID_MATROX_MGA_IMP 0x0d10 -#define PCI_DEVICE_ID_MATROX_G100_MM 0x1000 -#define PCI_DEVICE_ID_MATROX_G100_AGP 0x1001 -#define PCI_DEVICE_ID_MATROX_G200_PCI 0x0520 -#define PCI_DEVICE_ID_MATROX_G200_AGP 0x0521 -#define PCI_DEVICE_ID_MATROX_G400 0x0525 -#define PCI_DEVICE_ID_MATROX_G200EV_PCI 0x0530 -#define PCI_DEVICE_ID_MATROX_G550 0x2527 -#define PCI_DEVICE_ID_MATROX_VIA 0x4536 - -#define PCI_VENDOR_ID_CT 0x102c -#define PCI_DEVICE_ID_CT_69000 0x00c0 -#define PCI_DEVICE_ID_CT_65545 0x00d8 -#define PCI_DEVICE_ID_CT_65548 0x00dc -#define PCI_DEVICE_ID_CT_65550 0x00e0 -#define PCI_DEVICE_ID_CT_65554 0x00e4 -#define PCI_DEVICE_ID_CT_65555 0x00e5 - -#define PCI_VENDOR_ID_MIRO 0x1031 -#define PCI_DEVICE_ID_MIRO_36050 0x5601 -#define PCI_DEVICE_ID_MIRO_DC10PLUS 0x7efe -#define PCI_DEVICE_ID_MIRO_DC30PLUS 0xd801 - -#define PCI_VENDOR_ID_NEC 0x1033 -#define PCI_DEVICE_ID_NEC_CBUS_1 0x0001 /* PCI-Cbus Bridge */ -#define PCI_DEVICE_ID_NEC_LOCAL 0x0002 /* Local Bridge */ -#define PCI_DEVICE_ID_NEC_ATM 0x0003 /* ATM LAN Controller */ -#define PCI_DEVICE_ID_NEC_R4000 0x0004 /* R4000 Bridge */ -#define PCI_DEVICE_ID_NEC_486 0x0005 /* 486 Like Peripheral Bus Bridge */ -#define PCI_DEVICE_ID_NEC_ACCEL_1 0x0006 /* Graphic Accelerator */ -#define PCI_DEVICE_ID_NEC_UXBUS 0x0007 /* UX-Bus Bridge */ -#define PCI_DEVICE_ID_NEC_ACCEL_2 0x0008 /* Graphic Accelerator */ -#define PCI_DEVICE_ID_NEC_GRAPH 0x0009 /* PCI-CoreGraph Bridge */ -#define PCI_DEVICE_ID_NEC_VL 0x0016 /* PCI-VL Bridge */ -#define PCI_DEVICE_ID_NEC_STARALPHA2 0x002c /* STAR ALPHA2 */ -#define PCI_DEVICE_ID_NEC_CBUS_2 0x002d /* PCI-Cbus Bridge */ -#define PCI_DEVICE_ID_NEC_USB 0x0035 /* PCI-USB Host */ -#define PCI_DEVICE_ID_NEC_CBUS_3 0x003b -#define PCI_DEVICE_ID_NEC_NAPCCARD 0x003e -#define PCI_DEVICE_ID_NEC_PCX2 0x0046 /* PowerVR */ -#define PCI_DEVICE_ID_NEC_VRC5476 0x009b -#define PCI_DEVICE_ID_NEC_VRC4173 0x00a5 -#define PCI_DEVICE_ID_NEC_VRC5477_AC97 0x00a6 -#define PCI_DEVICE_ID_NEC_PC9821CS01 0x800c /* PC-9821-CS01 */ -#define PCI_DEVICE_ID_NEC_PC9821NRB06 0x800d /* PC-9821NR-B06 */ - -#define PCI_VENDOR_ID_FD 0x1036 -#define PCI_DEVICE_ID_FD_36C70 0x0000 - -#define PCI_VENDOR_ID_SI 0x1039 -#define PCI_DEVICE_ID_SI_5591_AGP 0x0001 -#define PCI_DEVICE_ID_SI_6202 0x0002 -#define PCI_DEVICE_ID_SI_503 0x0008 -#define PCI_DEVICE_ID_SI_ACPI 0x0009 -#define PCI_DEVICE_ID_SI_SMBUS 0x0016 -#define PCI_DEVICE_ID_SI_LPC 0x0018 -#define PCI_DEVICE_ID_SI_5597_VGA 0x0200 -#define PCI_DEVICE_ID_SI_6205 0x0205 -#define PCI_DEVICE_ID_SI_501 0x0406 -#define PCI_DEVICE_ID_SI_496 0x0496 -#define PCI_DEVICE_ID_SI_300 0x0300 -#define PCI_DEVICE_ID_SI_315H 0x0310 -#define PCI_DEVICE_ID_SI_315 0x0315 -#define PCI_DEVICE_ID_SI_315PRO 0x0325 -#define PCI_DEVICE_ID_SI_530 0x0530 -#define PCI_DEVICE_ID_SI_540 0x0540 -#define PCI_DEVICE_ID_SI_550 0x0550 -#define PCI_DEVICE_ID_SI_540_VGA 0x5300 -#define PCI_DEVICE_ID_SI_550_VGA 0x5315 -#define PCI_DEVICE_ID_SI_620 0x0620 -#define PCI_DEVICE_ID_SI_630 0x0630 -#define PCI_DEVICE_ID_SI_633 0x0633 -#define PCI_DEVICE_ID_SI_635 0x0635 -#define PCI_DEVICE_ID_SI_640 0x0640 -#define PCI_DEVICE_ID_SI_645 0x0645 -#define PCI_DEVICE_ID_SI_646 0x0646 -#define PCI_DEVICE_ID_SI_648 0x0648 -#define PCI_DEVICE_ID_SI_650 0x0650 -#define PCI_DEVICE_ID_SI_651 0x0651 -#define PCI_DEVICE_ID_SI_655 0x0655 -#define PCI_DEVICE_ID_SI_661 0x0661 -#define PCI_DEVICE_ID_SI_730 0x0730 -#define PCI_DEVICE_ID_SI_733 0x0733 -#define PCI_DEVICE_ID_SI_630_VGA 0x6300 -#define PCI_DEVICE_ID_SI_735 0x0735 -#define PCI_DEVICE_ID_SI_740 0x0740 -#define PCI_DEVICE_ID_SI_741 0x0741 -#define PCI_DEVICE_ID_SI_745 0x0745 -#define PCI_DEVICE_ID_SI_746 0x0746 -#define PCI_DEVICE_ID_SI_755 0x0755 -#define PCI_DEVICE_ID_SI_760 0x0760 -#define PCI_DEVICE_ID_SI_900 0x0900 -#define PCI_DEVICE_ID_SI_961 0x0961 -#define PCI_DEVICE_ID_SI_962 0x0962 -#define PCI_DEVICE_ID_SI_963 0x0963 -#define PCI_DEVICE_ID_SI_965 0x0965 -#define PCI_DEVICE_ID_SI_966 0x0966 -#define PCI_DEVICE_ID_SI_968 0x0968 -#define PCI_DEVICE_ID_SI_1180 0x1180 -#define PCI_DEVICE_ID_SI_5511 0x5511 -#define PCI_DEVICE_ID_SI_5513 0x5513 -#define PCI_DEVICE_ID_SI_5517 0x5517 -#define PCI_DEVICE_ID_SI_5518 0x5518 -#define PCI_DEVICE_ID_SI_5571 0x5571 -#define PCI_DEVICE_ID_SI_5581 0x5581 -#define PCI_DEVICE_ID_SI_5582 0x5582 -#define PCI_DEVICE_ID_SI_5591 0x5591 -#define PCI_DEVICE_ID_SI_5596 0x5596 -#define PCI_DEVICE_ID_SI_5597 0x5597 -#define PCI_DEVICE_ID_SI_5598 0x5598 -#define PCI_DEVICE_ID_SI_5600 0x5600 -#define PCI_DEVICE_ID_SI_7012 0x7012 -#define PCI_DEVICE_ID_SI_7013 0x7013 -#define PCI_DEVICE_ID_SI_7016 0x7016 -#define PCI_DEVICE_ID_SI_7018 0x7018 - -#define PCI_VENDOR_ID_HP 0x103c -#define PCI_DEVICE_ID_HP_VISUALIZE_EG 0x1005 -#define PCI_DEVICE_ID_HP_VISUALIZE_FX6 0x1006 -#define PCI_DEVICE_ID_HP_VISUALIZE_FX4 0x1008 -#define PCI_DEVICE_ID_HP_VISUALIZE_FX2 0x100a -#define PCI_DEVICE_ID_HP_TACHYON 0x1028 -#define PCI_DEVICE_ID_HP_TACHLITE 0x1029 -#define PCI_DEVICE_ID_HP_J2585A 0x1030 -#define PCI_DEVICE_ID_HP_J2585B 0x1031 -#define PCI_DEVICE_ID_HP_J2973A 0x1040 -#define PCI_DEVICE_ID_HP_J2970A 0x1042 -#define PCI_DEVICE_ID_HP_DIVA 0x1048 -#define PCI_DEVICE_ID_HP_DIVA_TOSCA1 0x1049 -#define PCI_DEVICE_ID_HP_DIVA_TOSCA2 0x104A -#define PCI_DEVICE_ID_HP_DIVA_MAESTRO 0x104B -#define PCI_DEVICE_ID_HP_REO_IOC 0x10f1 -#define PCI_DEVICE_ID_HP_VISUALIZE_FXE 0x108b -#define PCI_DEVICE_ID_HP_DIVA_HALFDOME 0x1223 -#define PCI_DEVICE_ID_HP_DIVA_KEYSTONE 0x1226 -#define PCI_DEVICE_ID_HP_DIVA_POWERBAR 0x1227 -#define PCI_DEVICE_ID_HP_ZX1_IOC 0x122a -#define PCI_DEVICE_ID_HP_PCIX_LBA 0x122e -#define PCI_DEVICE_ID_HP_SX1000_IOC 0x127c -#define PCI_DEVICE_ID_HP_DIVA_EVEREST 0x1282 -#define PCI_DEVICE_ID_HP_DIVA_AUX 0x1290 -#define PCI_DEVICE_ID_HP_DIVA_RMP3 0x1301 -#define PCI_DEVICE_ID_HP_DIVA_HURRICANE 0x132a -#define PCI_DEVICE_ID_HP_CISSA 0x3220 -#define PCI_DEVICE_ID_HP_CISSC 0x3230 -#define PCI_DEVICE_ID_HP_CISSD 0x3238 -#define PCI_DEVICE_ID_HP_CISSE 0x323a -#define PCI_DEVICE_ID_HP_ZX2_IOC 0x4031 - -#define PCI_VENDOR_ID_PCTECH 0x1042 -#define PCI_DEVICE_ID_PCTECH_RZ1000 0x1000 -#define PCI_DEVICE_ID_PCTECH_RZ1001 0x1001 -#define PCI_DEVICE_ID_PCTECH_SAMURAI_IDE 0x3020 - -#define PCI_VENDOR_ID_ASUSTEK 0x1043 -#define PCI_DEVICE_ID_ASUSTEK_0675 0x0675 - -#define PCI_VENDOR_ID_DPT 0x1044 -#define PCI_DEVICE_ID_DPT 0xa400 - -#define PCI_VENDOR_ID_OPTI 0x1045 -#define PCI_DEVICE_ID_OPTI_82C558 0xc558 -#define PCI_DEVICE_ID_OPTI_82C621 0xc621 -#define PCI_DEVICE_ID_OPTI_82C700 0xc700 -#define PCI_DEVICE_ID_OPTI_82C825 0xd568 - -#define PCI_VENDOR_ID_ELSA 0x1048 -#define PCI_DEVICE_ID_ELSA_MICROLINK 0x1000 -#define PCI_DEVICE_ID_ELSA_QS3000 0x3000 - -#define PCI_VENDOR_ID_BUSLOGIC 0x104B -#define PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER_NC 0x0140 -#define PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER 0x1040 -#define PCI_DEVICE_ID_BUSLOGIC_FLASHPOINT 0x8130 - -#define PCI_VENDOR_ID_TI 0x104c -#define PCI_DEVICE_ID_TI_TVP4020 0x3d07 -#define PCI_DEVICE_ID_TI_4450 0x8011 -#define PCI_DEVICE_ID_TI_TSB43AB22 0x8023 -#define PCI_DEVICE_ID_TI_XX21_XX11 0x8031 -#define PCI_DEVICE_ID_TI_XX21_XX11_FM 0x8033 -#define PCI_DEVICE_ID_TI_XX21_XX11_SD 0x8034 -#define PCI_DEVICE_ID_TI_X515 0x8036 -#define PCI_DEVICE_ID_TI_XX12 0x8039 -#define PCI_DEVICE_ID_TI_XX12_FM 0x803b -#define PCI_DEVICE_ID_TI_1130 0xac12 -#define PCI_DEVICE_ID_TI_1031 0xac13 -#define PCI_DEVICE_ID_TI_1131 0xac15 -#define PCI_DEVICE_ID_TI_1250 0xac16 -#define PCI_DEVICE_ID_TI_1220 0xac17 -#define PCI_DEVICE_ID_TI_1221 0xac19 -#define PCI_DEVICE_ID_TI_1210 0xac1a -#define PCI_DEVICE_ID_TI_1450 0xac1b -#define PCI_DEVICE_ID_TI_1225 0xac1c -#define PCI_DEVICE_ID_TI_1251A 0xac1d -#define PCI_DEVICE_ID_TI_1211 0xac1e -#define PCI_DEVICE_ID_TI_1251B 0xac1f -#define PCI_DEVICE_ID_TI_4410 0xac41 -#define PCI_DEVICE_ID_TI_4451 0xac42 -#define PCI_DEVICE_ID_TI_4510 0xac44 -#define PCI_DEVICE_ID_TI_4520 0xac46 -#define PCI_DEVICE_ID_TI_7510 0xac47 -#define PCI_DEVICE_ID_TI_7610 0xac48 -#define PCI_DEVICE_ID_TI_7410 0xac49 -#define PCI_DEVICE_ID_TI_1410 0xac50 -#define PCI_DEVICE_ID_TI_1420 0xac51 -#define PCI_DEVICE_ID_TI_1451A 0xac52 -#define PCI_DEVICE_ID_TI_1620 0xac54 -#define PCI_DEVICE_ID_TI_1520 0xac55 -#define PCI_DEVICE_ID_TI_1510 0xac56 -#define PCI_DEVICE_ID_TI_X620 0xac8d -#define PCI_DEVICE_ID_TI_X420 0xac8e -#define PCI_DEVICE_ID_TI_XX20_FM 0xac8f - -#define PCI_VENDOR_ID_SONY 0x104d - -/* Winbond have two vendor IDs! See 0x10ad as well */ -#define PCI_VENDOR_ID_WINBOND2 0x1050 -#define PCI_DEVICE_ID_WINBOND2_89C940F 0x5a5a -#define PCI_DEVICE_ID_WINBOND2_6692 0x6692 - -#define PCI_VENDOR_ID_ANIGMA 0x1051 -#define PCI_DEVICE_ID_ANIGMA_MC145575 0x0100 - -#define PCI_VENDOR_ID_EFAR 0x1055 -#define PCI_DEVICE_ID_EFAR_SLC90E66_1 0x9130 -#define PCI_DEVICE_ID_EFAR_SLC90E66_3 0x9463 - -#define PCI_VENDOR_ID_MOTOROLA 0x1057 -#define PCI_DEVICE_ID_MOTOROLA_MPC105 0x0001 -#define PCI_DEVICE_ID_MOTOROLA_MPC106 0x0002 -#define PCI_DEVICE_ID_MOTOROLA_MPC107 0x0004 -#define PCI_DEVICE_ID_MOTOROLA_RAVEN 0x4801 -#define PCI_DEVICE_ID_MOTOROLA_FALCON 0x4802 -#define PCI_DEVICE_ID_MOTOROLA_HAWK 0x4803 -#define PCI_DEVICE_ID_MOTOROLA_HARRIER 0x480b -#define PCI_DEVICE_ID_MOTOROLA_MPC5200 0x5803 -#define PCI_DEVICE_ID_MOTOROLA_MPC5200B 0x5809 - -#define PCI_VENDOR_ID_PROMISE 0x105a -#define PCI_DEVICE_ID_PROMISE_20265 0x0d30 -#define PCI_DEVICE_ID_PROMISE_20267 0x4d30 -#define PCI_DEVICE_ID_PROMISE_20246 0x4d33 -#define PCI_DEVICE_ID_PROMISE_20262 0x4d38 -#define PCI_DEVICE_ID_PROMISE_20263 0x0D38 -#define PCI_DEVICE_ID_PROMISE_20268 0x4d68 -#define PCI_DEVICE_ID_PROMISE_20269 0x4d69 -#define PCI_DEVICE_ID_PROMISE_20270 0x6268 -#define PCI_DEVICE_ID_PROMISE_20271 0x6269 -#define PCI_DEVICE_ID_PROMISE_20275 0x1275 -#define PCI_DEVICE_ID_PROMISE_20276 0x5275 -#define PCI_DEVICE_ID_PROMISE_20277 0x7275 - -#define PCI_VENDOR_ID_UMC 0x1060 -#define PCI_DEVICE_ID_UMC_UM8673F 0x0101 -#define PCI_DEVICE_ID_UMC_UM8886BF 0x673a -#define PCI_DEVICE_ID_UMC_UM8886A 0x886a - -#define PCI_VENDOR_ID_PICOPOWER 0x1066 -#define PCI_DEVICE_ID_PICOPOWER_PT86C523 0x0002 -#define PCI_DEVICE_ID_PICOPOWER_PT86C523BBP 0x8002 - -#define PCI_VENDOR_ID_MYLEX 0x1069 -#define PCI_DEVICE_ID_MYLEX_DAC960_P 0x0001 -#define PCI_DEVICE_ID_MYLEX_DAC960_PD 0x0002 -#define PCI_DEVICE_ID_MYLEX_DAC960_PG 0x0010 -#define PCI_DEVICE_ID_MYLEX_DAC960_LA 0x0020 -#define PCI_DEVICE_ID_MYLEX_DAC960_LP 0x0050 -#define PCI_DEVICE_ID_MYLEX_DAC960_BA 0xBA56 -#define PCI_DEVICE_ID_MYLEX_DAC960_GEM 0xB166 - -#define PCI_VENDOR_ID_APPLE 0x106b -#define PCI_DEVICE_ID_APPLE_BANDIT 0x0001 -#define PCI_DEVICE_ID_APPLE_HYDRA 0x000e -#define PCI_DEVICE_ID_APPLE_UNI_N_FW 0x0018 -#define PCI_DEVICE_ID_APPLE_UNI_N_AGP 0x0020 -#define PCI_DEVICE_ID_APPLE_UNI_N_GMAC 0x0021 -#define PCI_DEVICE_ID_APPLE_UNI_N_GMACP 0x0024 -#define PCI_DEVICE_ID_APPLE_UNI_N_AGP_P 0x0027 -#define PCI_DEVICE_ID_APPLE_UNI_N_AGP15 0x002d -#define PCI_DEVICE_ID_APPLE_UNI_N_PCI15 0x002e -#define PCI_DEVICE_ID_APPLE_UNI_N_GMAC2 0x0032 -#define PCI_DEVICE_ID_APPLE_UNI_N_ATA 0x0033 -#define PCI_DEVICE_ID_APPLE_UNI_N_AGP2 0x0034 -#define PCI_DEVICE_ID_APPLE_IPID_ATA100 0x003b -#define PCI_DEVICE_ID_APPLE_K2_ATA100 0x0043 -#define PCI_DEVICE_ID_APPLE_U3_AGP 0x004b -#define PCI_DEVICE_ID_APPLE_K2_GMAC 0x004c -#define PCI_DEVICE_ID_APPLE_SH_ATA 0x0050 -#define PCI_DEVICE_ID_APPLE_SH_SUNGEM 0x0051 -#define PCI_DEVICE_ID_APPLE_U3L_AGP 0x0058 -#define PCI_DEVICE_ID_APPLE_U3H_AGP 0x0059 -#define PCI_DEVICE_ID_APPLE_IPID2_AGP 0x0066 -#define PCI_DEVICE_ID_APPLE_IPID2_ATA 0x0069 -#define PCI_DEVICE_ID_APPLE_IPID2_FW 0x006a -#define PCI_DEVICE_ID_APPLE_IPID2_GMAC 0x006b -#define PCI_DEVICE_ID_APPLE_TIGON3 0x1645 - -#define PCI_VENDOR_ID_YAMAHA 0x1073 -#define PCI_DEVICE_ID_YAMAHA_724 0x0004 -#define PCI_DEVICE_ID_YAMAHA_724F 0x000d -#define PCI_DEVICE_ID_YAMAHA_740 0x000a -#define PCI_DEVICE_ID_YAMAHA_740C 0x000c -#define PCI_DEVICE_ID_YAMAHA_744 0x0010 -#define PCI_DEVICE_ID_YAMAHA_754 0x0012 - -#define PCI_VENDOR_ID_QLOGIC 0x1077 -#define PCI_DEVICE_ID_QLOGIC_ISP10160 0x1016 -#define PCI_DEVICE_ID_QLOGIC_ISP1020 0x1020 -#define PCI_DEVICE_ID_QLOGIC_ISP1080 0x1080 -#define PCI_DEVICE_ID_QLOGIC_ISP12160 0x1216 -#define PCI_DEVICE_ID_QLOGIC_ISP1240 0x1240 -#define PCI_DEVICE_ID_QLOGIC_ISP1280 0x1280 -#define PCI_DEVICE_ID_QLOGIC_ISP2100 0x2100 -#define PCI_DEVICE_ID_QLOGIC_ISP2200 0x2200 -#define PCI_DEVICE_ID_QLOGIC_ISP2300 0x2300 -#define PCI_DEVICE_ID_QLOGIC_ISP2312 0x2312 -#define PCI_DEVICE_ID_QLOGIC_ISP2322 0x2322 -#define PCI_DEVICE_ID_QLOGIC_ISP6312 0x6312 -#define PCI_DEVICE_ID_QLOGIC_ISP6322 0x6322 -#define PCI_DEVICE_ID_QLOGIC_ISP2422 0x2422 -#define PCI_DEVICE_ID_QLOGIC_ISP2432 0x2432 -#define PCI_DEVICE_ID_QLOGIC_ISP2512 0x2512 -#define PCI_DEVICE_ID_QLOGIC_ISP2522 0x2522 -#define PCI_DEVICE_ID_QLOGIC_ISP5422 0x5422 -#define PCI_DEVICE_ID_QLOGIC_ISP5432 0x5432 - -#define PCI_VENDOR_ID_CYRIX 0x1078 -#define PCI_DEVICE_ID_CYRIX_5510 0x0000 -#define PCI_DEVICE_ID_CYRIX_PCI_MASTER 0x0001 -#define PCI_DEVICE_ID_CYRIX_5520 0x0002 -#define PCI_DEVICE_ID_CYRIX_5530_LEGACY 0x0100 -#define PCI_DEVICE_ID_CYRIX_5530_IDE 0x0102 -#define PCI_DEVICE_ID_CYRIX_5530_AUDIO 0x0103 -#define PCI_DEVICE_ID_CYRIX_5530_VIDEO 0x0104 - -#define PCI_VENDOR_ID_CONTAQ 0x1080 -#define PCI_DEVICE_ID_CONTAQ_82C693 0xc693 - -#define PCI_VENDOR_ID_OLICOM 0x108d -#define PCI_DEVICE_ID_OLICOM_OC2325 0x0012 -#define PCI_DEVICE_ID_OLICOM_OC2183 0x0013 -#define PCI_DEVICE_ID_OLICOM_OC2326 0x0014 - -#define PCI_VENDOR_ID_SUN 0x108e -#define PCI_DEVICE_ID_SUN_EBUS 0x1000 -#define PCI_DEVICE_ID_SUN_HAPPYMEAL 0x1001 -#define PCI_DEVICE_ID_SUN_RIO_EBUS 0x1100 -#define PCI_DEVICE_ID_SUN_RIO_GEM 0x1101 -#define PCI_DEVICE_ID_SUN_RIO_1394 0x1102 -#define PCI_DEVICE_ID_SUN_RIO_USB 0x1103 -#define PCI_DEVICE_ID_SUN_GEM 0x2bad -#define PCI_DEVICE_ID_SUN_SIMBA 0x5000 -#define PCI_DEVICE_ID_SUN_PBM 0x8000 -#define PCI_DEVICE_ID_SUN_SCHIZO 0x8001 -#define PCI_DEVICE_ID_SUN_SABRE 0xa000 -#define PCI_DEVICE_ID_SUN_HUMMINGBIRD 0xa001 -#define PCI_DEVICE_ID_SUN_TOMATILLO 0xa801 -#define PCI_DEVICE_ID_SUN_CASSINI 0xabba - -#define PCI_VENDOR_ID_CMD 0x1095 -#define PCI_DEVICE_ID_CMD_643 0x0643 -#define PCI_DEVICE_ID_CMD_646 0x0646 -#define PCI_DEVICE_ID_CMD_648 0x0648 -#define PCI_DEVICE_ID_CMD_649 0x0649 - -#define PCI_DEVICE_ID_SII_680 0x0680 -#define PCI_DEVICE_ID_SII_3112 0x3112 -#define PCI_DEVICE_ID_SII_1210SA 0x0240 - -#define PCI_VENDOR_ID_BROOKTREE 0x109e -#define PCI_DEVICE_ID_BROOKTREE_878 0x0878 -#define PCI_DEVICE_ID_BROOKTREE_879 0x0879 - -#define PCI_VENDOR_ID_SGI 0x10a9 -#define PCI_DEVICE_ID_SGI_IOC3 0x0003 -#define PCI_DEVICE_ID_SGI_LITHIUM 0x1002 -#define PCI_DEVICE_ID_SGI_IOC4 0x100a - -#define PCI_VENDOR_ID_WINBOND 0x10ad -#define PCI_DEVICE_ID_WINBOND_82C105 0x0105 -#define PCI_DEVICE_ID_WINBOND_83C553 0x0565 - -#define PCI_VENDOR_ID_PLX 0x10b5 -#define PCI_DEVICE_ID_PLX_R685 0x1030 -#define PCI_DEVICE_ID_PLX_ROMULUS 0x106a -#define PCI_DEVICE_ID_PLX_SPCOM800 0x1076 -#define PCI_DEVICE_ID_PLX_1077 0x1077 -#define PCI_DEVICE_ID_PLX_SPCOM200 0x1103 -#define PCI_DEVICE_ID_PLX_DJINN_ITOO 0x1151 -#define PCI_DEVICE_ID_PLX_R753 0x1152 -#define PCI_DEVICE_ID_PLX_OLITEC 0x1187 -#define PCI_DEVICE_ID_PLX_PCI200SYN 0x3196 -#define PCI_DEVICE_ID_PLX_9030 0x9030 -#define PCI_DEVICE_ID_PLX_9050 0x9050 -#define PCI_DEVICE_ID_PLX_9080 0x9080 -#define PCI_DEVICE_ID_PLX_GTEK_SERIAL2 0xa001 - -#define PCI_VENDOR_ID_MADGE 0x10b6 -#define PCI_DEVICE_ID_MADGE_MK2 0x0002 - -#define PCI_VENDOR_ID_3COM 0x10b7 -#define PCI_DEVICE_ID_3COM_3C985 0x0001 -#define PCI_DEVICE_ID_3COM_3C940 0x1700 -#define PCI_DEVICE_ID_3COM_3C339 0x3390 -#define PCI_DEVICE_ID_3COM_3C359 0x3590 -#define PCI_DEVICE_ID_3COM_3C940B 0x80eb -#define PCI_DEVICE_ID_3COM_3CR990 0x9900 -#define PCI_DEVICE_ID_3COM_3CR990_TX_95 0x9902 -#define PCI_DEVICE_ID_3COM_3CR990_TX_97 0x9903 -#define PCI_DEVICE_ID_3COM_3CR990B 0x9904 -#define PCI_DEVICE_ID_3COM_3CR990_FX 0x9905 -#define PCI_DEVICE_ID_3COM_3CR990SVR95 0x9908 -#define PCI_DEVICE_ID_3COM_3CR990SVR97 0x9909 -#define PCI_DEVICE_ID_3COM_3CR990SVR 0x990a - -#define PCI_VENDOR_ID_AL 0x10b9 -#define PCI_DEVICE_ID_AL_M1533 0x1533 -#define PCI_DEVICE_ID_AL_M1535 0x1535 -#define PCI_DEVICE_ID_AL_M1541 0x1541 -#define PCI_DEVICE_ID_AL_M1563 0x1563 -#define PCI_DEVICE_ID_AL_M1621 0x1621 -#define PCI_DEVICE_ID_AL_M1631 0x1631 -#define PCI_DEVICE_ID_AL_M1632 0x1632 -#define PCI_DEVICE_ID_AL_M1641 0x1641 -#define PCI_DEVICE_ID_AL_M1644 0x1644 -#define PCI_DEVICE_ID_AL_M1647 0x1647 -#define PCI_DEVICE_ID_AL_M1651 0x1651 -#define PCI_DEVICE_ID_AL_M1671 0x1671 -#define PCI_DEVICE_ID_AL_M1681 0x1681 -#define PCI_DEVICE_ID_AL_M1683 0x1683 -#define PCI_DEVICE_ID_AL_M1689 0x1689 -#define PCI_DEVICE_ID_AL_M5219 0x5219 -#define PCI_DEVICE_ID_AL_M5228 0x5228 -#define PCI_DEVICE_ID_AL_M5229 0x5229 -#define PCI_DEVICE_ID_AL_M5451 0x5451 -#define PCI_DEVICE_ID_AL_M7101 0x7101 - -#define PCI_VENDOR_ID_NEOMAGIC 0x10c8 -#define PCI_DEVICE_ID_NEOMAGIC_NM256AV_AUDIO 0x8005 -#define PCI_DEVICE_ID_NEOMAGIC_NM256ZX_AUDIO 0x8006 -#define PCI_DEVICE_ID_NEOMAGIC_NM256XL_PLUS_AUDIO 0x8016 - -#define PCI_VENDOR_ID_TCONRAD 0x10da -#define PCI_DEVICE_ID_TCONRAD_TOKENRING 0x0508 - -#define PCI_VENDOR_ID_NVIDIA 0x10de -#define PCI_DEVICE_ID_NVIDIA_TNT 0x0020 -#define PCI_DEVICE_ID_NVIDIA_TNT2 0x0028 -#define PCI_DEVICE_ID_NVIDIA_UTNT2 0x0029 -#define PCI_DEVICE_ID_NVIDIA_TNT_UNKNOWN 0x002a -#define PCI_DEVICE_ID_NVIDIA_VTNT2 0x002C -#define PCI_DEVICE_ID_NVIDIA_UVTNT2 0x002D -#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SMBUS 0x0034 -#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_IDE 0x0035 -#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA 0x0036 -#define PCI_DEVICE_ID_NVIDIA_NVENET_10 0x0037 -#define PCI_DEVICE_ID_NVIDIA_NVENET_11 0x0038 -#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA2 0x003e -#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800_ULTRA 0x0040 -#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800 0x0041 -#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800_LE 0x0042 -#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800_GT 0x0045 -#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_4000 0x004E -#define PCI_DEVICE_ID_NVIDIA_NFORCE4_SMBUS 0x0052 -#define PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_IDE 0x0053 -#define PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_SATA 0x0054 -#define PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_SATA2 0x0055 -#define PCI_DEVICE_ID_NVIDIA_NVENET_8 0x0056 -#define PCI_DEVICE_ID_NVIDIA_NVENET_9 0x0057 -#define PCI_DEVICE_ID_NVIDIA_CK804_AUDIO 0x0059 -#define PCI_DEVICE_ID_NVIDIA_CK804_PCIE 0x005d -#define PCI_DEVICE_ID_NVIDIA_NFORCE2_SMBUS 0x0064 -#define PCI_DEVICE_ID_NVIDIA_NFORCE2_IDE 0x0065 -#define PCI_DEVICE_ID_NVIDIA_NVENET_2 0x0066 -#define PCI_DEVICE_ID_NVIDIA_MCP2_MODEM 0x0069 -#define PCI_DEVICE_ID_NVIDIA_MCP2_AUDIO 0x006a -#define PCI_DEVICE_ID_NVIDIA_NFORCE2S_SMBUS 0x0084 -#define PCI_DEVICE_ID_NVIDIA_NFORCE2S_IDE 0x0085 -#define PCI_DEVICE_ID_NVIDIA_NVENET_4 0x0086 -#define PCI_DEVICE_ID_NVIDIA_MCP2S_MODEM 0x0089 -#define PCI_DEVICE_ID_NVIDIA_CK8_AUDIO 0x008a -#define PCI_DEVICE_ID_NVIDIA_NVENET_5 0x008c -#define PCI_DEVICE_ID_NVIDIA_NFORCE2S_SATA 0x008e -#define PCI_DEVICE_ID_NVIDIA_GEFORCE_7800_GT 0x0090 -#define PCI_DEVICE_ID_NVIDIA_GEFORCE_7800_GTX 0x0091 -#define PCI_DEVICE_ID_NVIDIA_GEFORCE_GO_7800 0x0098 -#define PCI_DEVICE_ID_NVIDIA_GEFORCE_GO_7800_GTX 0x0099 -#define PCI_DEVICE_ID_NVIDIA_ITNT2 0x00A0 -#define PCI_DEVICE_ID_GEFORCE_6800A 0x00c1 -#define PCI_DEVICE_ID_GEFORCE_6800A_LE 0x00c2 -#define PCI_DEVICE_ID_GEFORCE_GO_6800 0x00c8 -#define PCI_DEVICE_ID_GEFORCE_GO_6800_ULTRA 0x00c9 -#define PCI_DEVICE_ID_QUADRO_FX_GO1400 0x00cc -#define PCI_DEVICE_ID_QUADRO_FX_1400 0x00ce -#define PCI_DEVICE_ID_NVIDIA_NFORCE3 0x00d1 -#define PCI_DEVICE_ID_NVIDIA_NFORCE3_SMBUS 0x00d4 -#define PCI_DEVICE_ID_NVIDIA_NFORCE3_IDE 0x00d5 -#define PCI_DEVICE_ID_NVIDIA_NVENET_3 0x00d6 -#define PCI_DEVICE_ID_NVIDIA_MCP3_MODEM 0x00d9 -#define PCI_DEVICE_ID_NVIDIA_MCP3_AUDIO 0x00da -#define PCI_DEVICE_ID_NVIDIA_NVENET_7 0x00df -#define PCI_DEVICE_ID_NVIDIA_NFORCE3S 0x00e1 -#define PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA 0x00e3 -#define PCI_DEVICE_ID_NVIDIA_NFORCE3S_SMBUS 0x00e4 -#define PCI_DEVICE_ID_NVIDIA_NFORCE3S_IDE 0x00e5 -#define PCI_DEVICE_ID_NVIDIA_NVENET_6 0x00e6 -#define PCI_DEVICE_ID_NVIDIA_CK8S_AUDIO 0x00ea -#define PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA2 0x00ee -#define PCIE_DEVICE_ID_NVIDIA_GEFORCE_6800_ALT1 0x00f0 -#define PCIE_DEVICE_ID_NVIDIA_GEFORCE_6600_ALT1 0x00f1 -#define PCIE_DEVICE_ID_NVIDIA_GEFORCE_6600_ALT2 0x00f2 -#define PCIE_DEVICE_ID_NVIDIA_GEFORCE_6200_ALT1 0x00f3 -#define PCIE_DEVICE_ID_NVIDIA_GEFORCE_6800_GT 0x00f9 -#define PCIE_DEVICE_ID_NVIDIA_QUADRO_NVS280 0x00fd -#define PCI_DEVICE_ID_NVIDIA_GEFORCE_SDR 0x0100 -#define PCI_DEVICE_ID_NVIDIA_GEFORCE_DDR 0x0101 -#define PCI_DEVICE_ID_NVIDIA_QUADRO 0x0103 -#define PCI_DEVICE_ID_NVIDIA_GEFORCE2_MX 0x0110 -#define PCI_DEVICE_ID_NVIDIA_GEFORCE2_MX2 0x0111 -#define PCI_DEVICE_ID_NVIDIA_GEFORCE2_GO 0x0112 -#define PCI_DEVICE_ID_NVIDIA_QUADRO2_MXR 0x0113 -#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6600_GT 0x0140 -#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6600 0x0141 -#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6610_XL 0x0145 -#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_540 0x014E -#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6200 0x014F -#define PCI_DEVICE_ID_NVIDIA_GEFORCE2_GTS 0x0150 -#define PCI_DEVICE_ID_NVIDIA_GEFORCE2_GTS2 0x0151 -#define PCI_DEVICE_ID_NVIDIA_GEFORCE2_ULTRA 0x0152 -#define PCI_DEVICE_ID_NVIDIA_QUADRO2_PRO 0x0153 -#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6200_TURBOCACHE 0x0161 -#define PCI_DEVICE_ID_NVIDIA_GEFORCE_GO_6200 0x0164 -#define PCI_DEVICE_ID_NVIDIA_GEFORCE_GO_6250 0x0166 -#define PCI_DEVICE_ID_NVIDIA_GEFORCE_GO_6200_1 0x0167 -#define PCI_DEVICE_ID_NVIDIA_GEFORCE_GO_6250_1 0x0168 -#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_460 0x0170 -#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_440 0x0171 -#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_420 0x0172 -#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_440_SE 0x0173 -#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_440_GO 0x0174 -#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_420_GO 0x0175 -#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_420_GO_M32 0x0176 -#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_460_GO 0x0177 -#define PCI_DEVICE_ID_NVIDIA_QUADRO4_500XGL 0x0178 -#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_440_GO_M64 0x0179 -#define PCI_DEVICE_ID_NVIDIA_QUADRO4_200 0x017A -#define PCI_DEVICE_ID_NVIDIA_QUADRO4_550XGL 0x017B -#define PCI_DEVICE_ID_NVIDIA_QUADRO4_500_GOGL 0x017C -#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_410_GO_M16 0x017D -#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_440_8X 0x0181 -#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_440SE_8X 0x0182 -#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_420_8X 0x0183 -#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_4000 0x0185 -#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_448_GO 0x0186 -#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_488_GO 0x0187 -#define PCI_DEVICE_ID_NVIDIA_QUADRO4_580_XGL 0x0188 -#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_MAC 0x0189 -#define PCI_DEVICE_ID_NVIDIA_QUADRO4_280_NVS 0x018A -#define PCI_DEVICE_ID_NVIDIA_QUADRO4_380_XGL 0x018B -#define PCI_DEVICE_ID_NVIDIA_IGEFORCE2 0x01a0 -#define PCI_DEVICE_ID_NVIDIA_NFORCE 0x01a4 -#define PCI_DEVICE_ID_NVIDIA_MCP1_AUDIO 0x01b1 -#define PCI_DEVICE_ID_NVIDIA_NFORCE_SMBUS 0x01b4 -#define PCI_DEVICE_ID_NVIDIA_NFORCE_IDE 0x01bc -#define PCI_DEVICE_ID_NVIDIA_MCP1_MODEM 0x01c1 -#define PCI_DEVICE_ID_NVIDIA_NVENET_1 0x01c3 -#define PCI_DEVICE_ID_NVIDIA_NFORCE2 0x01e0 -#define PCI_DEVICE_ID_NVIDIA_GEFORCE3 0x0200 -#define PCI_DEVICE_ID_NVIDIA_GEFORCE3_1 0x0201 -#define PCI_DEVICE_ID_NVIDIA_GEFORCE3_2 0x0202 -#define PCI_DEVICE_ID_NVIDIA_QUADRO_DDC 0x0203 -#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800B 0x0211 -#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800B_LE 0x0212 -#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800B_GT 0x0215 -#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4600 0x0250 -#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4400 0x0251 -#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4200 0x0253 -#define PCI_DEVICE_ID_NVIDIA_QUADRO4_900XGL 0x0258 -#define PCI_DEVICE_ID_NVIDIA_QUADRO4_750XGL 0x0259 -#define PCI_DEVICE_ID_NVIDIA_QUADRO4_700XGL 0x025B -#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SMBUS 0x0264 -#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_IDE 0x0265 -#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA 0x0266 -#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA2 0x0267 -#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SMBUS 0x0368 -#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_IDE 0x036E -#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA 0x037E -#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA2 0x037F -#define PCI_DEVICE_ID_NVIDIA_NVENET_12 0x0268 -#define PCI_DEVICE_ID_NVIDIA_NVENET_13 0x0269 -#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4800 0x0280 -#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4800_8X 0x0281 -#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4800SE 0x0282 -#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_4200_GO 0x0286 -#define PCI_DEVICE_ID_NVIDIA_QUADRO4_980_XGL 0x0288 -#define PCI_DEVICE_ID_NVIDIA_QUADRO4_780_XGL 0x0289 -#define PCI_DEVICE_ID_NVIDIA_QUADRO4_700_GOGL 0x028C -#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5800_ULTRA 0x0301 -#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5800 0x0302 -#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_2000 0x0308 -#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_1000 0x0309 -#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5600_ULTRA 0x0311 -#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5600 0x0312 -#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5600SE 0x0314 -#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5600 0x031A -#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5650 0x031B -#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_GO700 0x031C -#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5200 0x0320 -#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5200_ULTRA 0x0321 -#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5200_1 0x0322 -#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5200SE 0x0323 -#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5200 0x0324 -#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5250 0x0325 -#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5500 0x0326 -#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5100 0x0327 -#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5250_32 0x0328 -#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO_5200 0x0329 -#define PCI_DEVICE_ID_NVIDIA_QUADRO_NVS_280_PCI 0x032A -#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_500 0x032B -#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5300 0x032C -#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5100 0x032D -#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5900_ULTRA 0x0330 -#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5900 0x0331 -#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5900XT 0x0332 -#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5950_ULTRA 0x0333 -#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5900ZT 0x0334 -#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_3000 0x0338 -#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_700 0x033F -#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5700_ULTRA 0x0341 -#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5700 0x0342 -#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5700LE 0x0343 -#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5700VE 0x0344 -#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5700_1 0x0347 -#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5700_2 0x0348 -#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_GO1000 0x034C -#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_1100 0x034E -#define PCI_DEVICE_ID_NVIDIA_NVENET_14 0x0372 -#define PCI_DEVICE_ID_NVIDIA_NVENET_15 0x0373 -#define PCI_DEVICE_ID_NVIDIA_NVENET_16 0x03E5 -#define PCI_DEVICE_ID_NVIDIA_NVENET_17 0x03E6 -#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA 0x03E7 -#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SMBUS 0x03EB -#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_IDE 0x03EC -#define PCI_DEVICE_ID_NVIDIA_NVENET_18 0x03EE -#define PCI_DEVICE_ID_NVIDIA_NVENET_19 0x03EF -#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA2 0x03F6 -#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA3 0x03F7 -#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP65_SMBUS 0x0446 -#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP65_IDE 0x0448 -#define PCI_DEVICE_ID_NVIDIA_NVENET_20 0x0450 -#define PCI_DEVICE_ID_NVIDIA_NVENET_21 0x0451 -#define PCI_DEVICE_ID_NVIDIA_NVENET_22 0x0452 -#define PCI_DEVICE_ID_NVIDIA_NVENET_23 0x0453 -#define PCI_DEVICE_ID_NVIDIA_NVENET_24 0x054C -#define PCI_DEVICE_ID_NVIDIA_NVENET_25 0x054D -#define PCI_DEVICE_ID_NVIDIA_NVENET_26 0x054E -#define PCI_DEVICE_ID_NVIDIA_NVENET_27 0x054F -#define PCI_DEVICE_ID_NVIDIA_NVENET_28 0x07DC -#define PCI_DEVICE_ID_NVIDIA_NVENET_29 0x07DD -#define PCI_DEVICE_ID_NVIDIA_NVENET_30 0x07DE -#define PCI_DEVICE_ID_NVIDIA_NVENET_31 0x07DF -#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP67_IDE 0x0560 -#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP73_IDE 0x056C -#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP77_IDE 0x0759 -#define PCI_DEVICE_ID_NVIDIA_NVENET_32 0x0760 -#define PCI_DEVICE_ID_NVIDIA_NVENET_33 0x0761 -#define PCI_DEVICE_ID_NVIDIA_NVENET_34 0x0762 -#define PCI_DEVICE_ID_NVIDIA_NVENET_35 0x0763 -#define PCI_DEVICE_ID_NVIDIA_NVENET_36 0x0AB0 -#define PCI_DEVICE_ID_NVIDIA_NVENET_37 0x0AB1 -#define PCI_DEVICE_ID_NVIDIA_NVENET_38 0x0AB2 -#define PCI_DEVICE_ID_NVIDIA_NVENET_39 0x0AB3 - -#define PCI_VENDOR_ID_IMS 0x10e0 -#define PCI_DEVICE_ID_IMS_TT128 0x9128 -#define PCI_DEVICE_ID_IMS_TT3D 0x9135 - -#define PCI_VENDOR_ID_INTERG 0x10ea -#define PCI_DEVICE_ID_INTERG_1682 0x1682 -#define PCI_DEVICE_ID_INTERG_2000 0x2000 -#define PCI_DEVICE_ID_INTERG_2010 0x2010 -#define PCI_DEVICE_ID_INTERG_5000 0x5000 -#define PCI_DEVICE_ID_INTERG_5050 0x5050 - -#define PCI_VENDOR_ID_REALTEK 0x10ec -#define PCI_DEVICE_ID_REALTEK_8139 0x8139 - -#define PCI_VENDOR_ID_XILINX 0x10ee -#define PCI_DEVICE_ID_RME_DIGI96 0x3fc0 -#define PCI_DEVICE_ID_RME_DIGI96_8 0x3fc1 -#define PCI_DEVICE_ID_RME_DIGI96_8_PRO 0x3fc2 -#define PCI_DEVICE_ID_RME_DIGI96_8_PAD_OR_PST 0x3fc3 -#define PCI_DEVICE_ID_XILINX_HAMMERFALL_DSP 0x3fc5 -#define PCI_DEVICE_ID_XILINX_HAMMERFALL_DSP_MADI 0x3fc6 - -#define PCI_VENDOR_ID_INIT 0x1101 - -#define PCI_VENDOR_ID_CREATIVE 0x1102 /* duplicate: ECTIVA */ -#define PCI_DEVICE_ID_CREATIVE_EMU10K1 0x0002 - -#define PCI_VENDOR_ID_ECTIVA 0x1102 /* duplicate: CREATIVE */ -#define PCI_DEVICE_ID_ECTIVA_EV1938 0x8938 - -#define PCI_VENDOR_ID_TTI 0x1103 -#define PCI_DEVICE_ID_TTI_HPT343 0x0003 -#define PCI_DEVICE_ID_TTI_HPT366 0x0004 -#define PCI_DEVICE_ID_TTI_HPT372 0x0005 -#define PCI_DEVICE_ID_TTI_HPT302 0x0006 -#define PCI_DEVICE_ID_TTI_HPT371 0x0007 -#define PCI_DEVICE_ID_TTI_HPT374 0x0008 -#define PCI_DEVICE_ID_TTI_HPT372N 0x0009 /* apparently a 372N variant? */ - -#define PCI_VENDOR_ID_VIA 0x1106 -#define PCI_DEVICE_ID_VIA_8763_0 0x0198 -#define PCI_DEVICE_ID_VIA_8380_0 0x0204 -#define PCI_DEVICE_ID_VIA_3238_0 0x0238 -#define PCI_DEVICE_ID_VIA_PT880 0x0258 -#define PCI_DEVICE_ID_VIA_PT880ULTRA 0x0308 -#define PCI_DEVICE_ID_VIA_PX8X0_0 0x0259 -#define PCI_DEVICE_ID_VIA_3269_0 0x0269 -#define PCI_DEVICE_ID_VIA_K8T800PRO_0 0x0282 -#define PCI_DEVICE_ID_VIA_3296_0 0x0296 -#define PCI_DEVICE_ID_VIA_8363_0 0x0305 -#define PCI_DEVICE_ID_VIA_P4M800CE 0x0314 -#define PCI_DEVICE_ID_VIA_P4M890 0x0327 -#define PCI_DEVICE_ID_VIA_VT3324 0x0324 -#define PCI_DEVICE_ID_VIA_VT3336 0x0336 -#define PCI_DEVICE_ID_VIA_VT3351 0x0351 -#define PCI_DEVICE_ID_VIA_VT3364 0x0364 -#define PCI_DEVICE_ID_VIA_8371_0 0x0391 -#define PCI_DEVICE_ID_VIA_8501_0 0x0501 -#define PCI_DEVICE_ID_VIA_82C561 0x0561 -#define PCI_DEVICE_ID_VIA_82C586_1 0x0571 -#define PCI_DEVICE_ID_VIA_82C576 0x0576 -#define PCI_DEVICE_ID_VIA_82C586_0 0x0586 -#define PCI_DEVICE_ID_VIA_82C596 0x0596 -#define PCI_DEVICE_ID_VIA_82C597_0 0x0597 -#define PCI_DEVICE_ID_VIA_82C598_0 0x0598 -#define PCI_DEVICE_ID_VIA_8601_0 0x0601 -#define PCI_DEVICE_ID_VIA_8605_0 0x0605 -#define PCI_DEVICE_ID_VIA_82C686 0x0686 -#define PCI_DEVICE_ID_VIA_82C691_0 0x0691 -#define PCI_DEVICE_ID_VIA_82C576_1 0x1571 -#define PCI_DEVICE_ID_VIA_82C586_2 0x3038 -#define PCI_DEVICE_ID_VIA_82C586_3 0x3040 -#define PCI_DEVICE_ID_VIA_82C596_3 0x3050 -#define PCI_DEVICE_ID_VIA_82C596B_3 0x3051 -#define PCI_DEVICE_ID_VIA_82C686_4 0x3057 -#define PCI_DEVICE_ID_VIA_82C686_5 0x3058 -#define PCI_DEVICE_ID_VIA_8233_5 0x3059 -#define PCI_DEVICE_ID_VIA_8233_0 0x3074 -#define PCI_DEVICE_ID_VIA_8633_0 0x3091 -#define PCI_DEVICE_ID_VIA_8367_0 0x3099 -#define PCI_DEVICE_ID_VIA_8653_0 0x3101 -#define PCI_DEVICE_ID_VIA_8622 0x3102 -#define PCI_DEVICE_ID_VIA_8235_USB_2 0x3104 -#define PCI_DEVICE_ID_VIA_8233C_0 0x3109 -#define PCI_DEVICE_ID_VIA_8361 0x3112 -#define PCI_DEVICE_ID_VIA_XM266 0x3116 -#define PCI_DEVICE_ID_VIA_612X 0x3119 -#define PCI_DEVICE_ID_VIA_862X_0 0x3123 -#define PCI_DEVICE_ID_VIA_8753_0 0x3128 -#define PCI_DEVICE_ID_VIA_8233A 0x3147 -#define PCI_DEVICE_ID_VIA_8703_51_0 0x3148 -#define PCI_DEVICE_ID_VIA_8237_SATA 0x3149 -#define PCI_DEVICE_ID_VIA_XN266 0x3156 -#define PCI_DEVICE_ID_VIA_6410 0x3164 -#define PCI_DEVICE_ID_VIA_8754C_0 0x3168 -#define PCI_DEVICE_ID_VIA_8235 0x3177 -#define PCI_DEVICE_ID_VIA_8385_0 0x3188 -#define PCI_DEVICE_ID_VIA_8377_0 0x3189 -#define PCI_DEVICE_ID_VIA_8378_0 0x3205 -#define PCI_DEVICE_ID_VIA_8783_0 0x3208 -#define PCI_DEVICE_ID_VIA_8237 0x3227 -#define PCI_DEVICE_ID_VIA_8251 0x3287 -#define PCI_DEVICE_ID_VIA_8237A 0x3337 -#define PCI_DEVICE_ID_VIA_8237S 0x3372 -#define PCI_DEVICE_ID_VIA_SATA_EIDE 0x5324 -#define PCI_DEVICE_ID_VIA_8231 0x8231 -#define PCI_DEVICE_ID_VIA_8231_4 0x8235 -#define PCI_DEVICE_ID_VIA_8365_1 0x8305 -#define PCI_DEVICE_ID_VIA_CX700 0x8324 -#define PCI_DEVICE_ID_VIA_CX700_IDE 0x0581 -#define PCI_DEVICE_ID_VIA_VX800 0x8353 -#define PCI_DEVICE_ID_VIA_8371_1 0x8391 -#define PCI_DEVICE_ID_VIA_82C598_1 0x8598 -#define PCI_DEVICE_ID_VIA_838X_1 0xB188 -#define PCI_DEVICE_ID_VIA_83_87XX_1 0xB198 - -#define PCI_VENDOR_ID_SIEMENS 0x110A -#define PCI_DEVICE_ID_SIEMENS_DSCC4 0x2102 - -#define PCI_VENDOR_ID_VORTEX 0x1119 -#define PCI_DEVICE_ID_VORTEX_GDT60x0 0x0000 -#define PCI_DEVICE_ID_VORTEX_GDT6000B 0x0001 -#define PCI_DEVICE_ID_VORTEX_GDT6x10 0x0002 -#define PCI_DEVICE_ID_VORTEX_GDT6x20 0x0003 -#define PCI_DEVICE_ID_VORTEX_GDT6530 0x0004 -#define PCI_DEVICE_ID_VORTEX_GDT6550 0x0005 -#define PCI_DEVICE_ID_VORTEX_GDT6x17 0x0006 -#define PCI_DEVICE_ID_VORTEX_GDT6x27 0x0007 -#define PCI_DEVICE_ID_VORTEX_GDT6537 0x0008 -#define PCI_DEVICE_ID_VORTEX_GDT6557 0x0009 -#define PCI_DEVICE_ID_VORTEX_GDT6x15 0x000a -#define PCI_DEVICE_ID_VORTEX_GDT6x25 0x000b -#define PCI_DEVICE_ID_VORTEX_GDT6535 0x000c -#define PCI_DEVICE_ID_VORTEX_GDT6555 0x000d -#define PCI_DEVICE_ID_VORTEX_GDT6x17RP 0x0100 -#define PCI_DEVICE_ID_VORTEX_GDT6x27RP 0x0101 -#define PCI_DEVICE_ID_VORTEX_GDT6537RP 0x0102 -#define PCI_DEVICE_ID_VORTEX_GDT6557RP 0x0103 -#define PCI_DEVICE_ID_VORTEX_GDT6x11RP 0x0104 -#define PCI_DEVICE_ID_VORTEX_GDT6x21RP 0x0105 - -#define PCI_VENDOR_ID_EF 0x111a -#define PCI_DEVICE_ID_EF_ATM_FPGA 0x0000 -#define PCI_DEVICE_ID_EF_ATM_ASIC 0x0002 -#define PCI_DEVICE_ID_EF_ATM_LANAI2 0x0003 -#define PCI_DEVICE_ID_EF_ATM_LANAIHB 0x0005 - -#define PCI_VENDOR_ID_IDT 0x111d -#define PCI_DEVICE_ID_IDT_IDT77201 0x0001 - -#define PCI_VENDOR_ID_FORE 0x1127 -#define PCI_DEVICE_ID_FORE_PCA200E 0x0300 - -#define PCI_VENDOR_ID_PHILIPS 0x1131 -#define PCI_DEVICE_ID_PHILIPS_SAA7146 0x7146 -#define PCI_DEVICE_ID_PHILIPS_SAA9730 0x9730 - -#define PCI_VENDOR_ID_EICON 0x1133 -#define PCI_DEVICE_ID_EICON_DIVA20 0xe002 -#define PCI_DEVICE_ID_EICON_DIVA20_U 0xe004 -#define PCI_DEVICE_ID_EICON_DIVA201 0xe005 -#define PCI_DEVICE_ID_EICON_DIVA202 0xe00b -#define PCI_DEVICE_ID_EICON_MAESTRA 0xe010 -#define PCI_DEVICE_ID_EICON_MAESTRAQ 0xe012 -#define PCI_DEVICE_ID_EICON_MAESTRAQ_U 0xe013 -#define PCI_DEVICE_ID_EICON_MAESTRAP 0xe014 - -#define PCI_VENDOR_ID_CISCO 0x1137 - -#define PCI_VENDOR_ID_ZIATECH 0x1138 -#define PCI_DEVICE_ID_ZIATECH_5550_HC 0x5550 - - -#define PCI_VENDOR_ID_SYSKONNECT 0x1148 -#define PCI_DEVICE_ID_SYSKONNECT_TR 0x4200 -#define PCI_DEVICE_ID_SYSKONNECT_GE 0x4300 -#define PCI_DEVICE_ID_SYSKONNECT_YU 0x4320 -#define PCI_DEVICE_ID_SYSKONNECT_9DXX 0x4400 -#define PCI_DEVICE_ID_SYSKONNECT_9MXX 0x4500 - -#define PCI_VENDOR_ID_DIGI 0x114f -#define PCI_DEVICE_ID_DIGI_DF_M_IOM2_E 0x0070 -#define PCI_DEVICE_ID_DIGI_DF_M_E 0x0071 -#define PCI_DEVICE_ID_DIGI_DF_M_IOM2_A 0x0072 -#define PCI_DEVICE_ID_DIGI_DF_M_A 0x0073 -#define PCI_DEVICE_ID_NEO_2DB9 0x00C8 -#define PCI_DEVICE_ID_NEO_2DB9PRI 0x00C9 -#define PCI_DEVICE_ID_NEO_2RJ45 0x00CA -#define PCI_DEVICE_ID_NEO_2RJ45PRI 0x00CB -#define PCIE_DEVICE_ID_NEO_4_IBM 0x00F4 - -#define PCI_VENDOR_ID_XIRCOM 0x115d -#define PCI_DEVICE_ID_XIRCOM_RBM56G 0x0101 -#define PCI_DEVICE_ID_XIRCOM_X3201_MDM 0x0103 - -#define PCI_VENDOR_ID_SERVERWORKS 0x1166 -#define PCI_DEVICE_ID_SERVERWORKS_HE 0x0008 -#define PCI_DEVICE_ID_SERVERWORKS_LE 0x0009 -#define PCI_DEVICE_ID_SERVERWORKS_GCNB_LE 0x0017 -#define PCI_DEVICE_ID_SERVERWORKS_HT1000_PXB 0x0036 -#define PCI_DEVICE_ID_SERVERWORKS_EPB 0x0103 -#define PCI_DEVICE_ID_SERVERWORKS_HT2000_PCIE 0x0132 -#define PCI_DEVICE_ID_SERVERWORKS_OSB4 0x0200 -#define PCI_DEVICE_ID_SERVERWORKS_CSB5 0x0201 -#define PCI_DEVICE_ID_SERVERWORKS_CSB6 0x0203 -#define PCI_DEVICE_ID_SERVERWORKS_HT1000SB 0x0205 -#define PCI_DEVICE_ID_SERVERWORKS_OSB4IDE 0x0211 -#define PCI_DEVICE_ID_SERVERWORKS_CSB5IDE 0x0212 -#define PCI_DEVICE_ID_SERVERWORKS_CSB6IDE 0x0213 -#define PCI_DEVICE_ID_SERVERWORKS_HT1000IDE 0x0214 -#define PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2 0x0217 -#define PCI_DEVICE_ID_SERVERWORKS_CSB6LPC 0x0227 - -#define PCI_VENDOR_ID_SBE 0x1176 -#define PCI_DEVICE_ID_SBE_WANXL100 0x0301 -#define PCI_DEVICE_ID_SBE_WANXL200 0x0302 -#define PCI_DEVICE_ID_SBE_WANXL400 0x0104 - -#define PCI_VENDOR_ID_TOSHIBA 0x1179 -#define PCI_DEVICE_ID_TOSHIBA_PICCOLO 0x0102 -#define PCI_DEVICE_ID_TOSHIBA_PICCOLO_1 0x0103 -#define PCI_DEVICE_ID_TOSHIBA_PICCOLO_2 0x0105 -#define PCI_DEVICE_ID_TOSHIBA_TOPIC95 0x060a -#define PCI_DEVICE_ID_TOSHIBA_TOPIC97 0x060f -#define PCI_DEVICE_ID_TOSHIBA_TOPIC100 0x0617 - -#define PCI_VENDOR_ID_TOSHIBA_2 0x102f -#define PCI_DEVICE_ID_TOSHIBA_TC35815CF 0x0030 -#define PCI_DEVICE_ID_TOSHIBA_TC35815_NWU 0x0031 -#define PCI_DEVICE_ID_TOSHIBA_TC35815_TX4939 0x0032 -#define PCI_DEVICE_ID_TOSHIBA_TC86C001_IDE 0x0105 -#define PCI_DEVICE_ID_TOSHIBA_TC86C001_MISC 0x0108 -#define PCI_DEVICE_ID_TOSHIBA_SPIDER_NET 0x01b3 - -#define PCI_VENDOR_ID_ATTO 0x117c - -#define PCI_VENDOR_ID_RICOH 0x1180 -#define PCI_DEVICE_ID_RICOH_RL5C465 0x0465 -#define PCI_DEVICE_ID_RICOH_RL5C466 0x0466 -#define PCI_DEVICE_ID_RICOH_RL5C475 0x0475 -#define PCI_DEVICE_ID_RICOH_RL5C476 0x0476 -#define PCI_DEVICE_ID_RICOH_RL5C478 0x0478 -#define PCI_DEVICE_ID_RICOH_R5C822 0x0822 -#define PCI_DEVICE_ID_RICOH_R5C832 0x0832 -#define PCI_DEVICE_ID_RICOH_R5C843 0x0843 - -#define PCI_VENDOR_ID_DLINK 0x1186 -#define PCI_DEVICE_ID_DLINK_DGE510T 0x4c00 - -#define PCI_VENDOR_ID_ARTOP 0x1191 -#define PCI_DEVICE_ID_ARTOP_ATP850UF 0x0005 -#define PCI_DEVICE_ID_ARTOP_ATP860 0x0006 -#define PCI_DEVICE_ID_ARTOP_ATP860R 0x0007 -#define PCI_DEVICE_ID_ARTOP_ATP865 0x0008 -#define PCI_DEVICE_ID_ARTOP_ATP865R 0x0009 -#define PCI_DEVICE_ID_ARTOP_AEC7610 0x8002 -#define PCI_DEVICE_ID_ARTOP_AEC7612UW 0x8010 -#define PCI_DEVICE_ID_ARTOP_AEC7612U 0x8020 -#define PCI_DEVICE_ID_ARTOP_AEC7612S 0x8030 -#define PCI_DEVICE_ID_ARTOP_AEC7612D 0x8040 -#define PCI_DEVICE_ID_ARTOP_AEC7612SUW 0x8050 -#define PCI_DEVICE_ID_ARTOP_8060 0x8060 - -#define PCI_VENDOR_ID_ZEITNET 0x1193 -#define PCI_DEVICE_ID_ZEITNET_1221 0x0001 -#define PCI_DEVICE_ID_ZEITNET_1225 0x0002 - -#define PCI_VENDOR_ID_FUJITSU_ME 0x119e -#define PCI_DEVICE_ID_FUJITSU_FS155 0x0001 -#define PCI_DEVICE_ID_FUJITSU_FS50 0x0003 - -#define PCI_SUBVENDOR_ID_KEYSPAN 0x11a9 -#define PCI_SUBDEVICE_ID_KEYSPAN_SX2 0x5334 - -#define PCI_VENDOR_ID_MARVELL 0x11ab -#define PCI_DEVICE_ID_MARVELL_GT64111 0x4146 -#define PCI_DEVICE_ID_MARVELL_GT64260 0x6430 -#define PCI_DEVICE_ID_MARVELL_MV64360 0x6460 -#define PCI_DEVICE_ID_MARVELL_MV64460 0x6480 -#define PCI_DEVICE_ID_MARVELL_88ALP01_NAND 0x4100 -#define PCI_DEVICE_ID_MARVELL_88ALP01_SD 0x4101 -#define PCI_DEVICE_ID_MARVELL_88ALP01_CCIC 0x4102 - -#define PCI_VENDOR_ID_V3 0x11b0 -#define PCI_DEVICE_ID_V3_V960 0x0001 -#define PCI_DEVICE_ID_V3_V351 0x0002 - -#define PCI_VENDOR_ID_ATT 0x11c1 -#define PCI_DEVICE_ID_ATT_VENUS_MODEM 0x480 - -#define PCI_VENDOR_ID_SPECIALIX 0x11cb -#define PCI_DEVICE_ID_SPECIALIX_IO8 0x2000 -#define PCI_DEVICE_ID_SPECIALIX_RIO 0x8000 -#define PCI_SUBDEVICE_ID_SPECIALIX_SPEED4 0xa004 - -#define PCI_VENDOR_ID_ANALOG_DEVICES 0x11d4 -#define PCI_DEVICE_ID_AD1889JS 0x1889 - -#define PCI_DEVICE_ID_SEGA_BBA 0x1234 - -#define PCI_VENDOR_ID_ZORAN 0x11de -#define PCI_DEVICE_ID_ZORAN_36057 0x6057 -#define PCI_DEVICE_ID_ZORAN_36120 0x6120 - -#define PCI_VENDOR_ID_COMPEX 0x11f6 -#define PCI_DEVICE_ID_COMPEX_ENET100VG4 0x0112 - -#define PCI_VENDOR_ID_RP 0x11fe -#define PCI_DEVICE_ID_RP32INTF 0x0001 -#define PCI_DEVICE_ID_RP8INTF 0x0002 -#define PCI_DEVICE_ID_RP16INTF 0x0003 -#define PCI_DEVICE_ID_RP4QUAD 0x0004 -#define PCI_DEVICE_ID_RP8OCTA 0x0005 -#define PCI_DEVICE_ID_RP8J 0x0006 -#define PCI_DEVICE_ID_RP4J 0x0007 -#define PCI_DEVICE_ID_RP8SNI 0x0008 -#define PCI_DEVICE_ID_RP16SNI 0x0009 -#define PCI_DEVICE_ID_RPP4 0x000A -#define PCI_DEVICE_ID_RPP8 0x000B -#define PCI_DEVICE_ID_RP4M 0x000D -#define PCI_DEVICE_ID_RP2_232 0x000E -#define PCI_DEVICE_ID_RP2_422 0x000F -#define PCI_DEVICE_ID_URP32INTF 0x0801 -#define PCI_DEVICE_ID_URP8INTF 0x0802 -#define PCI_DEVICE_ID_URP16INTF 0x0803 -#define PCI_DEVICE_ID_URP8OCTA 0x0805 -#define PCI_DEVICE_ID_UPCI_RM3_8PORT 0x080C -#define PCI_DEVICE_ID_UPCI_RM3_4PORT 0x080D -#define PCI_DEVICE_ID_CRP16INTF 0x0903 - -#define PCI_VENDOR_ID_CYCLADES 0x120e -#define PCI_DEVICE_ID_CYCLOM_Y_Lo 0x0100 -#define PCI_DEVICE_ID_CYCLOM_Y_Hi 0x0101 -#define PCI_DEVICE_ID_CYCLOM_4Y_Lo 0x0102 -#define PCI_DEVICE_ID_CYCLOM_4Y_Hi 0x0103 -#define PCI_DEVICE_ID_CYCLOM_8Y_Lo 0x0104 -#define PCI_DEVICE_ID_CYCLOM_8Y_Hi 0x0105 -#define PCI_DEVICE_ID_CYCLOM_Z_Lo 0x0200 -#define PCI_DEVICE_ID_CYCLOM_Z_Hi 0x0201 -#define PCI_DEVICE_ID_PC300_RX_2 0x0300 -#define PCI_DEVICE_ID_PC300_RX_1 0x0301 -#define PCI_DEVICE_ID_PC300_TE_2 0x0310 -#define PCI_DEVICE_ID_PC300_TE_1 0x0311 -#define PCI_DEVICE_ID_PC300_TE_M_2 0x0320 -#define PCI_DEVICE_ID_PC300_TE_M_1 0x0321 - -#define PCI_VENDOR_ID_ESSENTIAL 0x120f -#define PCI_DEVICE_ID_ESSENTIAL_ROADRUNNER 0x0001 - -#define PCI_VENDOR_ID_O2 0x1217 -#define PCI_DEVICE_ID_O2_6729 0x6729 -#define PCI_DEVICE_ID_O2_6730 0x673a -#define PCI_DEVICE_ID_O2_6832 0x6832 -#define PCI_DEVICE_ID_O2_6836 0x6836 - -#define PCI_VENDOR_ID_3DFX 0x121a -#define PCI_DEVICE_ID_3DFX_VOODOO 0x0001 -#define PCI_DEVICE_ID_3DFX_VOODOO2 0x0002 -#define PCI_DEVICE_ID_3DFX_BANSHEE 0x0003 -#define PCI_DEVICE_ID_3DFX_VOODOO3 0x0005 -#define PCI_DEVICE_ID_3DFX_VOODOO5 0x0009 - -#define PCI_VENDOR_ID_AVM 0x1244 -#define PCI_DEVICE_ID_AVM_B1 0x0700 -#define PCI_DEVICE_ID_AVM_C4 0x0800 -#define PCI_DEVICE_ID_AVM_A1 0x0a00 -#define PCI_DEVICE_ID_AVM_A1_V2 0x0e00 -#define PCI_DEVICE_ID_AVM_C2 0x1100 -#define PCI_DEVICE_ID_AVM_T1 0x1200 - -#define PCI_VENDOR_ID_STALLION 0x124d - -/* Allied Telesyn */ -#define PCI_VENDOR_ID_AT 0x1259 -#define PCI_SUBDEVICE_ID_AT_2700FX 0x2701 -#define PCI_SUBDEVICE_ID_AT_2701FX 0x2703 - -#define PCI_VENDOR_ID_ESS 0x125d -#define PCI_DEVICE_ID_ESS_ESS1968 0x1968 -#define PCI_DEVICE_ID_ESS_ESS1978 0x1978 -#define PCI_DEVICE_ID_ESS_ALLEGRO_1 0x1988 -#define PCI_DEVICE_ID_ESS_ALLEGRO 0x1989 -#define PCI_DEVICE_ID_ESS_CANYON3D_2LE 0x1990 -#define PCI_DEVICE_ID_ESS_CANYON3D_2 0x1992 -#define PCI_DEVICE_ID_ESS_MAESTRO3 0x1998 -#define PCI_DEVICE_ID_ESS_MAESTRO3_1 0x1999 -#define PCI_DEVICE_ID_ESS_MAESTRO3_HW 0x199a -#define PCI_DEVICE_ID_ESS_MAESTRO3_2 0x199b - -#define PCI_VENDOR_ID_SATSAGEM 0x1267 -#define PCI_DEVICE_ID_SATSAGEM_NICCY 0x1016 - -#define PCI_VENDOR_ID_ENSONIQ 0x1274 -#define PCI_DEVICE_ID_ENSONIQ_CT5880 0x5880 -#define PCI_DEVICE_ID_ENSONIQ_ES1370 0x5000 -#define PCI_DEVICE_ID_ENSONIQ_ES1371 0x1371 - -#define PCI_VENDOR_ID_TRANSMETA 0x1279 -#define PCI_DEVICE_ID_EFFICEON 0x0060 - -#define PCI_VENDOR_ID_ROCKWELL 0x127A - -#define PCI_VENDOR_ID_ITE 0x1283 -#define PCI_DEVICE_ID_ITE_8211 0x8211 -#define PCI_DEVICE_ID_ITE_8212 0x8212 -#define PCI_DEVICE_ID_ITE_8213 0x8213 -#define PCI_DEVICE_ID_ITE_8152 0x8152 -#define PCI_DEVICE_ID_ITE_8872 0x8872 -#define PCI_DEVICE_ID_ITE_IT8330G_0 0xe886 - -/* formerly Platform Tech */ -#define PCI_DEVICE_ID_ESS_ESS0100 0x0100 - -#define PCI_VENDOR_ID_ALTEON 0x12ae - -#define PCI_SUBVENDOR_ID_CONNECT_TECH 0x12c4 -#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232 0x0001 -#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_232 0x0002 -#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_232 0x0003 -#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485 0x0004 -#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_4_4 0x0005 -#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485 0x0006 -#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485_2_2 0x0007 -#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_485 0x0008 -#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_2_6 0x0009 -#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH081101V1 0x000A -#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH041101V1 0x000B -#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_20MHZ 0x000C -#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_PTM 0x000D -#define PCI_SUBDEVICE_ID_CONNECT_TECH_NT960PCI 0x0100 -#define PCI_SUBDEVICE_ID_CONNECT_TECH_TITAN_2 0x0201 -#define PCI_SUBDEVICE_ID_CONNECT_TECH_TITAN_4 0x0202 -#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_232 0x0300 -#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_232 0x0301 -#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_232 0x0302 -#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_1_1 0x0310 -#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_2 0x0311 -#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_4 0x0312 -#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2 0x0320 -#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4 0x0321 -#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8 0x0322 -#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_2_485 0x0330 -#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_485 0x0331 -#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_485 0x0332 - -#define PCI_VENDOR_ID_NVIDIA_SGS 0x12d2 -#define PCI_DEVICE_ID_NVIDIA_SGS_RIVA128 0x0018 - -#define PCI_SUBVENDOR_ID_CHASE_PCIFAST 0x12E0 -#define PCI_SUBDEVICE_ID_CHASE_PCIFAST4 0x0031 -#define PCI_SUBDEVICE_ID_CHASE_PCIFAST8 0x0021 -#define PCI_SUBDEVICE_ID_CHASE_PCIFAST16 0x0011 -#define PCI_SUBDEVICE_ID_CHASE_PCIFAST16FMC 0x0041 -#define PCI_SUBVENDOR_ID_CHASE_PCIRAS 0x124D -#define PCI_SUBDEVICE_ID_CHASE_PCIRAS4 0xF001 -#define PCI_SUBDEVICE_ID_CHASE_PCIRAS8 0xF010 - -#define PCI_VENDOR_ID_AUREAL 0x12eb -#define PCI_DEVICE_ID_AUREAL_VORTEX_1 0x0001 -#define PCI_DEVICE_ID_AUREAL_VORTEX_2 0x0002 -#define PCI_DEVICE_ID_AUREAL_ADVANTAGE 0x0003 - -#define PCI_VENDOR_ID_ELECTRONICDESIGNGMBH 0x12f8 -#define PCI_DEVICE_ID_LML_33R10 0x8a02 - -#define PCI_VENDOR_ID_ESDGMBH 0x12fe -#define PCI_DEVICE_ID_ESDGMBH_CPCIASIO4 0x0111 - -#define PCI_VENDOR_ID_SIIG 0x131f -#define PCI_SUBVENDOR_ID_SIIG 0x131f -#define PCI_DEVICE_ID_SIIG_1S_10x_550 0x1000 -#define PCI_DEVICE_ID_SIIG_1S_10x_650 0x1001 -#define PCI_DEVICE_ID_SIIG_1S_10x_850 0x1002 -#define PCI_DEVICE_ID_SIIG_1S1P_10x_550 0x1010 -#define PCI_DEVICE_ID_SIIG_1S1P_10x_650 0x1011 -#define PCI_DEVICE_ID_SIIG_1S1P_10x_850 0x1012 -#define PCI_DEVICE_ID_SIIG_1P_10x 0x1020 -#define PCI_DEVICE_ID_SIIG_2P_10x 0x1021 -#define PCI_DEVICE_ID_SIIG_2S_10x_550 0x1030 -#define PCI_DEVICE_ID_SIIG_2S_10x_650 0x1031 -#define PCI_DEVICE_ID_SIIG_2S_10x_850 0x1032 -#define PCI_DEVICE_ID_SIIG_2S1P_10x_550 0x1034 -#define PCI_DEVICE_ID_SIIG_2S1P_10x_650 0x1035 -#define PCI_DEVICE_ID_SIIG_2S1P_10x_850 0x1036 -#define PCI_DEVICE_ID_SIIG_4S_10x_550 0x1050 -#define PCI_DEVICE_ID_SIIG_4S_10x_650 0x1051 -#define PCI_DEVICE_ID_SIIG_4S_10x_850 0x1052 -#define PCI_DEVICE_ID_SIIG_1S_20x_550 0x2000 -#define PCI_DEVICE_ID_SIIG_1S_20x_650 0x2001 -#define PCI_DEVICE_ID_SIIG_1S_20x_850 0x2002 -#define PCI_DEVICE_ID_SIIG_1P_20x 0x2020 -#define PCI_DEVICE_ID_SIIG_2P_20x 0x2021 -#define PCI_DEVICE_ID_SIIG_2S_20x_550 0x2030 -#define PCI_DEVICE_ID_SIIG_2S_20x_650 0x2031 -#define PCI_DEVICE_ID_SIIG_2S_20x_850 0x2032 -#define PCI_DEVICE_ID_SIIG_2P1S_20x_550 0x2040 -#define PCI_DEVICE_ID_SIIG_2P1S_20x_650 0x2041 -#define PCI_DEVICE_ID_SIIG_2P1S_20x_850 0x2042 -#define PCI_DEVICE_ID_SIIG_1S1P_20x_550 0x2010 -#define PCI_DEVICE_ID_SIIG_1S1P_20x_650 0x2011 -#define PCI_DEVICE_ID_SIIG_1S1P_20x_850 0x2012 -#define PCI_DEVICE_ID_SIIG_4S_20x_550 0x2050 -#define PCI_DEVICE_ID_SIIG_4S_20x_650 0x2051 -#define PCI_DEVICE_ID_SIIG_4S_20x_850 0x2052 -#define PCI_DEVICE_ID_SIIG_2S1P_20x_550 0x2060 -#define PCI_DEVICE_ID_SIIG_2S1P_20x_650 0x2061 -#define PCI_DEVICE_ID_SIIG_2S1P_20x_850 0x2062 -#define PCI_DEVICE_ID_SIIG_8S_20x_550 0x2080 -#define PCI_DEVICE_ID_SIIG_8S_20x_650 0x2081 -#define PCI_DEVICE_ID_SIIG_8S_20x_850 0x2082 -#define PCI_SUBDEVICE_ID_SIIG_QUARTET_SERIAL 0x2050 - -#define PCI_VENDOR_ID_RADISYS 0x1331 - -#define PCI_VENDOR_ID_MICRO_MEMORY 0x1332 -#define PCI_DEVICE_ID_MICRO_MEMORY_5415CN 0x5415 -#define PCI_DEVICE_ID_MICRO_MEMORY_5425CN 0x5425 -#define PCI_DEVICE_ID_MICRO_MEMORY_6155 0x6155 - -#define PCI_VENDOR_ID_DOMEX 0x134a -#define PCI_DEVICE_ID_DOMEX_DMX3191D 0x0001 - -#define PCI_VENDOR_ID_INTASHIELD 0x135a -#define PCI_DEVICE_ID_INTASHIELD_IS200 0x0d80 -#define PCI_DEVICE_ID_INTASHIELD_IS400 0x0dc0 - -#define PCI_VENDOR_ID_QUATECH 0x135C -#define PCI_DEVICE_ID_QUATECH_QSC100 0x0010 -#define PCI_DEVICE_ID_QUATECH_DSC100 0x0020 -#define PCI_DEVICE_ID_QUATECH_ESC100D 0x0050 -#define PCI_DEVICE_ID_QUATECH_ESC100M 0x0060 -#define PCI_DEVICE_ID_QUATECH_SPPXP_100 0x0278 - -#define PCI_VENDOR_ID_SEALEVEL 0x135e -#define PCI_DEVICE_ID_SEALEVEL_U530 0x7101 -#define PCI_DEVICE_ID_SEALEVEL_UCOMM2 0x7201 -#define PCI_DEVICE_ID_SEALEVEL_UCOMM422 0x7402 -#define PCI_DEVICE_ID_SEALEVEL_UCOMM232 0x7202 -#define PCI_DEVICE_ID_SEALEVEL_COMM4 0x7401 -#define PCI_DEVICE_ID_SEALEVEL_COMM8 0x7801 -#define PCI_DEVICE_ID_SEALEVEL_UCOMM8 0x7804 - -#define PCI_VENDOR_ID_HYPERCOPE 0x1365 -#define PCI_DEVICE_ID_HYPERCOPE_PLX 0x9050 -#define PCI_SUBDEVICE_ID_HYPERCOPE_OLD_ERGO 0x0104 -#define PCI_SUBDEVICE_ID_HYPERCOPE_ERGO 0x0106 -#define PCI_SUBDEVICE_ID_HYPERCOPE_METRO 0x0107 -#define PCI_SUBDEVICE_ID_HYPERCOPE_CHAMP2 0x0108 - -#define PCI_VENDOR_ID_KAWASAKI 0x136b -#define PCI_DEVICE_ID_MCHIP_KL5A72002 0xff01 - -#define PCI_VENDOR_ID_CNET 0x1371 -#define PCI_DEVICE_ID_CNET_GIGACARD 0x434e - -#define PCI_VENDOR_ID_LMC 0x1376 -#define PCI_DEVICE_ID_LMC_HSSI 0x0003 -#define PCI_DEVICE_ID_LMC_DS3 0x0004 -#define PCI_DEVICE_ID_LMC_SSI 0x0005 -#define PCI_DEVICE_ID_LMC_T1 0x0006 - -#define PCI_VENDOR_ID_NETGEAR 0x1385 -#define PCI_DEVICE_ID_NETGEAR_GA620 0x620a - -#define PCI_VENDOR_ID_APPLICOM 0x1389 -#define PCI_DEVICE_ID_APPLICOM_PCIGENERIC 0x0001 -#define PCI_DEVICE_ID_APPLICOM_PCI2000IBS_CAN 0x0002 -#define PCI_DEVICE_ID_APPLICOM_PCI2000PFB 0x0003 - -#define PCI_VENDOR_ID_MOXA 0x1393 -#define PCI_DEVICE_ID_MOXA_RC7000 0x0001 -#define PCI_DEVICE_ID_MOXA_CP102 0x1020 -#define PCI_DEVICE_ID_MOXA_CP102UL 0x1021 -#define PCI_DEVICE_ID_MOXA_CP102U 0x1022 -#define PCI_DEVICE_ID_MOXA_C104 0x1040 -#define PCI_DEVICE_ID_MOXA_CP104U 0x1041 -#define PCI_DEVICE_ID_MOXA_CP104JU 0x1042 -#define PCI_DEVICE_ID_MOXA_CP104EL 0x1043 -#define PCI_DEVICE_ID_MOXA_CT114 0x1140 -#define PCI_DEVICE_ID_MOXA_CP114 0x1141 -#define PCI_DEVICE_ID_MOXA_CP118U 0x1180 -#define PCI_DEVICE_ID_MOXA_CP118EL 0x1181 -#define PCI_DEVICE_ID_MOXA_CP132 0x1320 -#define PCI_DEVICE_ID_MOXA_CP132U 0x1321 -#define PCI_DEVICE_ID_MOXA_CP134U 0x1340 -#define PCI_DEVICE_ID_MOXA_C168 0x1680 -#define PCI_DEVICE_ID_MOXA_CP168U 0x1681 -#define PCI_DEVICE_ID_MOXA_CP168EL 0x1682 -#define PCI_DEVICE_ID_MOXA_CP204J 0x2040 -#define PCI_DEVICE_ID_MOXA_C218 0x2180 -#define PCI_DEVICE_ID_MOXA_C320 0x3200 - -#define PCI_VENDOR_ID_CCD 0x1397 -#define PCI_DEVICE_ID_CCD_HFC4S 0x08B4 -#define PCI_SUBDEVICE_ID_CCD_PMX2S 0x1234 -#define PCI_DEVICE_ID_CCD_HFC8S 0x16B8 -#define PCI_DEVICE_ID_CCD_2BD0 0x2bd0 -#define PCI_DEVICE_ID_CCD_HFCE1 0x30B1 -#define PCI_SUBDEVICE_ID_CCD_SPD4S 0x3136 -#define PCI_SUBDEVICE_ID_CCD_SPDE1 0x3137 -#define PCI_DEVICE_ID_CCD_B000 0xb000 -#define PCI_DEVICE_ID_CCD_B006 0xb006 -#define PCI_DEVICE_ID_CCD_B007 0xb007 -#define PCI_DEVICE_ID_CCD_B008 0xb008 -#define PCI_DEVICE_ID_CCD_B009 0xb009 -#define PCI_DEVICE_ID_CCD_B00A 0xb00a -#define PCI_DEVICE_ID_CCD_B00B 0xb00b -#define PCI_DEVICE_ID_CCD_B00C 0xb00c -#define PCI_DEVICE_ID_CCD_B100 0xb100 -#define PCI_SUBDEVICE_ID_CCD_IOB4ST 0xB520 -#define PCI_SUBDEVICE_ID_CCD_IOB8STR 0xB521 -#define PCI_SUBDEVICE_ID_CCD_IOB8ST 0xB522 -#define PCI_SUBDEVICE_ID_CCD_IOB1E1 0xB523 -#define PCI_SUBDEVICE_ID_CCD_SWYX4S 0xB540 -#define PCI_SUBDEVICE_ID_CCD_JH4S20 0xB550 -#define PCI_SUBDEVICE_ID_CCD_IOB8ST_1 0xB552 -#define PCI_SUBDEVICE_ID_CCD_BN4S 0xB560 -#define PCI_SUBDEVICE_ID_CCD_BN8S 0xB562 -#define PCI_SUBDEVICE_ID_CCD_BNE1 0xB563 -#define PCI_SUBDEVICE_ID_CCD_BNE1D 0xB564 -#define PCI_SUBDEVICE_ID_CCD_BNE1DP 0xB565 -#define PCI_SUBDEVICE_ID_CCD_BN2S 0xB566 -#define PCI_SUBDEVICE_ID_CCD_BN1SM 0xB567 -#define PCI_SUBDEVICE_ID_CCD_BN4SM 0xB568 -#define PCI_SUBDEVICE_ID_CCD_BN2SM 0xB569 -#define PCI_SUBDEVICE_ID_CCD_BNE1M 0xB56A -#define PCI_SUBDEVICE_ID_CCD_BN8SP 0xB56B -#define PCI_SUBDEVICE_ID_CCD_HFC4S 0xB620 -#define PCI_SUBDEVICE_ID_CCD_HFC8S 0xB622 -#define PCI_DEVICE_ID_CCD_B700 0xb700 -#define PCI_DEVICE_ID_CCD_B701 0xb701 -#define PCI_SUBDEVICE_ID_CCD_HFCE1 0xC523 -#define PCI_SUBDEVICE_ID_CCD_OV2S 0xE884 -#define PCI_SUBDEVICE_ID_CCD_OV4S 0xE888 -#define PCI_SUBDEVICE_ID_CCD_OV8S 0xE998 - -#define PCI_VENDOR_ID_EXAR 0x13a8 -#define PCI_DEVICE_ID_EXAR_XR17C152 0x0152 -#define PCI_DEVICE_ID_EXAR_XR17C154 0x0154 -#define PCI_DEVICE_ID_EXAR_XR17C158 0x0158 - -#define PCI_VENDOR_ID_MICROGATE 0x13c0 -#define PCI_DEVICE_ID_MICROGATE_USC 0x0010 -#define PCI_DEVICE_ID_MICROGATE_SCA 0x0030 - -#define PCI_VENDOR_ID_3WARE 0x13C1 -#define PCI_DEVICE_ID_3WARE_1000 0x1000 -#define PCI_DEVICE_ID_3WARE_7000 0x1001 -#define PCI_DEVICE_ID_3WARE_9000 0x1002 - -#define PCI_VENDOR_ID_IOMEGA 0x13ca -#define PCI_DEVICE_ID_IOMEGA_BUZ 0x4231 - -#define PCI_VENDOR_ID_ABOCOM 0x13D1 -#define PCI_DEVICE_ID_ABOCOM_2BD1 0x2BD1 - -#define PCI_VENDOR_ID_SUNDANCE 0x13f0 - -#define PCI_VENDOR_ID_CMEDIA 0x13f6 -#define PCI_DEVICE_ID_CMEDIA_CM8338A 0x0100 -#define PCI_DEVICE_ID_CMEDIA_CM8338B 0x0101 -#define PCI_DEVICE_ID_CMEDIA_CM8738 0x0111 -#define PCI_DEVICE_ID_CMEDIA_CM8738B 0x0112 - -#define PCI_VENDOR_ID_LAVA 0x1407 -#define PCI_DEVICE_ID_LAVA_DSERIAL 0x0100 /* 2x 16550 */ -#define PCI_DEVICE_ID_LAVA_QUATRO_A 0x0101 /* 2x 16550, half of 4 port */ -#define PCI_DEVICE_ID_LAVA_QUATRO_B 0x0102 /* 2x 16550, half of 4 port */ -#define PCI_DEVICE_ID_LAVA_OCTO_A 0x0180 /* 4x 16550A, half of 8 port */ -#define PCI_DEVICE_ID_LAVA_OCTO_B 0x0181 /* 4x 16550A, half of 8 port */ -#define PCI_DEVICE_ID_LAVA_PORT_PLUS 0x0200 /* 2x 16650 */ -#define PCI_DEVICE_ID_LAVA_QUAD_A 0x0201 /* 2x 16650, half of 4 port */ -#define PCI_DEVICE_ID_LAVA_QUAD_B 0x0202 /* 2x 16650, half of 4 port */ -#define PCI_DEVICE_ID_LAVA_SSERIAL 0x0500 /* 1x 16550 */ -#define PCI_DEVICE_ID_LAVA_PORT_650 0x0600 /* 1x 16650 */ -#define PCI_DEVICE_ID_LAVA_PARALLEL 0x8000 -#define PCI_DEVICE_ID_LAVA_DUAL_PAR_A 0x8002 /* The Lava Dual Parallel is */ -#define PCI_DEVICE_ID_LAVA_DUAL_PAR_B 0x8003 /* two PCI devices on a card */ -#define PCI_DEVICE_ID_LAVA_BOCA_IOPPAR 0x8800 - -#define PCI_VENDOR_ID_TIMEDIA 0x1409 -#define PCI_DEVICE_ID_TIMEDIA_1889 0x7168 - -#define PCI_VENDOR_ID_ICE 0x1412 -#define PCI_DEVICE_ID_ICE_1712 0x1712 -#define PCI_DEVICE_ID_VT1724 0x1724 - -#define PCI_VENDOR_ID_OXSEMI 0x1415 -#define PCI_DEVICE_ID_OXSEMI_12PCI840 0x8403 -#define PCI_DEVICE_ID_OXSEMI_PCIe840 0xC000 -#define PCI_DEVICE_ID_OXSEMI_PCIe840_G 0xC004 -#define PCI_DEVICE_ID_OXSEMI_PCIe952_0 0xC100 -#define PCI_DEVICE_ID_OXSEMI_PCIe952_0_G 0xC104 -#define PCI_DEVICE_ID_OXSEMI_PCIe952_1 0xC110 -#define PCI_DEVICE_ID_OXSEMI_PCIe952_1_G 0xC114 -#define PCI_DEVICE_ID_OXSEMI_PCIe952_1_U 0xC118 -#define PCI_DEVICE_ID_OXSEMI_PCIe952_1_GU 0xC11C -#define PCI_DEVICE_ID_OXSEMI_16PCI954 0x9501 -#define PCI_DEVICE_ID_OXSEMI_16PCI95N 0x9511 -#define PCI_DEVICE_ID_OXSEMI_16PCI954PP 0x9513 -#define PCI_DEVICE_ID_OXSEMI_16PCI952 0x9521 -#define PCI_DEVICE_ID_OXSEMI_16PCI952PP 0x9523 - -#define PCI_VENDOR_ID_CHELSIO 0x1425 - -#define PCI_VENDOR_ID_SAMSUNG 0x144d - -#define PCI_VENDOR_ID_MYRICOM 0x14c1 - -#define PCI_VENDOR_ID_TITAN 0x14D2 -#define PCI_DEVICE_ID_TITAN_010L 0x8001 -#define PCI_DEVICE_ID_TITAN_100L 0x8010 -#define PCI_DEVICE_ID_TITAN_110L 0x8011 -#define PCI_DEVICE_ID_TITAN_200L 0x8020 -#define PCI_DEVICE_ID_TITAN_210L 0x8021 -#define PCI_DEVICE_ID_TITAN_400L 0x8040 -#define PCI_DEVICE_ID_TITAN_800L 0x8080 -#define PCI_DEVICE_ID_TITAN_100 0xA001 -#define PCI_DEVICE_ID_TITAN_200 0xA005 -#define PCI_DEVICE_ID_TITAN_400 0xA003 -#define PCI_DEVICE_ID_TITAN_800B 0xA004 - -#define PCI_VENDOR_ID_PANACOM 0x14d4 -#define PCI_DEVICE_ID_PANACOM_QUADMODEM 0x0400 -#define PCI_DEVICE_ID_PANACOM_DUALMODEM 0x0402 - -#define PCI_VENDOR_ID_SIPACKETS 0x14d9 -#define PCI_DEVICE_ID_SP1011 0x0010 - -#define PCI_VENDOR_ID_AFAVLAB 0x14db -#define PCI_DEVICE_ID_AFAVLAB_P028 0x2180 -#define PCI_DEVICE_ID_AFAVLAB_P030 0x2182 -#define PCI_SUBDEVICE_ID_AFAVLAB_P061 0x2150 - -#define PCI_VENDOR_ID_BROADCOM 0x14e4 -#define PCI_DEVICE_ID_TIGON3_5752 0x1600 -#define PCI_DEVICE_ID_TIGON3_5752M 0x1601 -#define PCI_DEVICE_ID_NX2_5709 0x1639 -#define PCI_DEVICE_ID_NX2_5709S 0x163a -#define PCI_DEVICE_ID_TIGON3_5700 0x1644 -#define PCI_DEVICE_ID_TIGON3_5701 0x1645 -#define PCI_DEVICE_ID_TIGON3_5702 0x1646 -#define PCI_DEVICE_ID_TIGON3_5703 0x1647 -#define PCI_DEVICE_ID_TIGON3_5704 0x1648 -#define PCI_DEVICE_ID_TIGON3_5704S_2 0x1649 -#define PCI_DEVICE_ID_NX2_5706 0x164a -#define PCI_DEVICE_ID_NX2_5708 0x164c -#define PCI_DEVICE_ID_TIGON3_5702FE 0x164d -#define PCI_DEVICE_ID_NX2_57710 0x164e -#define PCI_DEVICE_ID_NX2_57711 0x164f -#define PCI_DEVICE_ID_NX2_57711E 0x1650 -#define PCI_DEVICE_ID_TIGON3_5705 0x1653 -#define PCI_DEVICE_ID_TIGON3_5705_2 0x1654 -#define PCI_DEVICE_ID_TIGON3_5720 0x1658 -#define PCI_DEVICE_ID_TIGON3_5721 0x1659 -#define PCI_DEVICE_ID_TIGON3_5722 0x165a -#define PCI_DEVICE_ID_TIGON3_5723 0x165b -#define PCI_DEVICE_ID_TIGON3_5705M 0x165d -#define PCI_DEVICE_ID_TIGON3_5705M_2 0x165e -#define PCI_DEVICE_ID_TIGON3_5714 0x1668 -#define PCI_DEVICE_ID_TIGON3_5714S 0x1669 -#define PCI_DEVICE_ID_TIGON3_5780 0x166a -#define PCI_DEVICE_ID_TIGON3_5780S 0x166b -#define PCI_DEVICE_ID_TIGON3_5705F 0x166e -#define PCI_DEVICE_ID_TIGON3_5754M 0x1672 -#define PCI_DEVICE_ID_TIGON3_5755M 0x1673 -#define PCI_DEVICE_ID_TIGON3_5756 0x1674 -#define PCI_DEVICE_ID_TIGON3_5750 0x1676 -#define PCI_DEVICE_ID_TIGON3_5751 0x1677 -#define PCI_DEVICE_ID_TIGON3_5715 0x1678 -#define PCI_DEVICE_ID_TIGON3_5715S 0x1679 -#define PCI_DEVICE_ID_TIGON3_5754 0x167a -#define PCI_DEVICE_ID_TIGON3_5755 0x167b -#define PCI_DEVICE_ID_TIGON3_5750M 0x167c -#define PCI_DEVICE_ID_TIGON3_5751M 0x167d -#define PCI_DEVICE_ID_TIGON3_5751F 0x167e -#define PCI_DEVICE_ID_TIGON3_5787F 0x167f -#define PCI_DEVICE_ID_TIGON3_5761E 0x1680 -#define PCI_DEVICE_ID_TIGON3_5761 0x1681 -#define PCI_DEVICE_ID_TIGON3_5764 0x1684 -#define PCI_DEVICE_ID_TIGON3_5787M 0x1693 -#define PCI_DEVICE_ID_TIGON3_5782 0x1696 -#define PCI_DEVICE_ID_TIGON3_5784 0x1698 -#define PCI_DEVICE_ID_TIGON3_5785 0x1699 -#define PCI_DEVICE_ID_TIGON3_5786 0x169a -#define PCI_DEVICE_ID_TIGON3_5787 0x169b -#define PCI_DEVICE_ID_TIGON3_5788 0x169c -#define PCI_DEVICE_ID_TIGON3_5789 0x169d -#define PCI_DEVICE_ID_TIGON3_5702X 0x16a6 -#define PCI_DEVICE_ID_TIGON3_5703X 0x16a7 -#define PCI_DEVICE_ID_TIGON3_5704S 0x16a8 -#define PCI_DEVICE_ID_NX2_5706S 0x16aa -#define PCI_DEVICE_ID_NX2_5708S 0x16ac -#define PCI_DEVICE_ID_TIGON3_5702A3 0x16c6 -#define PCI_DEVICE_ID_TIGON3_5703A3 0x16c7 -#define PCI_DEVICE_ID_TIGON3_5781 0x16dd -#define PCI_DEVICE_ID_TIGON3_5753 0x16f7 -#define PCI_DEVICE_ID_TIGON3_5753M 0x16fd -#define PCI_DEVICE_ID_TIGON3_5753F 0x16fe -#define PCI_DEVICE_ID_TIGON3_5901 0x170d -#define PCI_DEVICE_ID_BCM4401B1 0x170c -#define PCI_DEVICE_ID_TIGON3_5901_2 0x170e -#define PCI_DEVICE_ID_TIGON3_5906 0x1712 -#define PCI_DEVICE_ID_TIGON3_5906M 0x1713 -#define PCI_DEVICE_ID_BCM4401 0x4401 -#define PCI_DEVICE_ID_BCM4401B0 0x4402 - -#define PCI_VENDOR_ID_TOPIC 0x151f -#define PCI_DEVICE_ID_TOPIC_TP560 0x0000 - -#define PCI_VENDOR_ID_MAINPINE 0x1522 -#define PCI_DEVICE_ID_MAINPINE_PBRIDGE 0x0100 -#define PCI_VENDOR_ID_ENE 0x1524 -#define PCI_DEVICE_ID_ENE_CB712_SD 0x0550 -#define PCI_DEVICE_ID_ENE_CB712_SD_2 0x0551 -#define PCI_DEVICE_ID_ENE_CB714_SD 0x0750 -#define PCI_DEVICE_ID_ENE_CB714_SD_2 0x0751 -#define PCI_DEVICE_ID_ENE_1211 0x1211 -#define PCI_DEVICE_ID_ENE_1225 0x1225 -#define PCI_DEVICE_ID_ENE_1410 0x1410 -#define PCI_DEVICE_ID_ENE_710 0x1411 -#define PCI_DEVICE_ID_ENE_712 0x1412 -#define PCI_DEVICE_ID_ENE_1420 0x1420 -#define PCI_DEVICE_ID_ENE_720 0x1421 -#define PCI_DEVICE_ID_ENE_722 0x1422 - -#define PCI_SUBVENDOR_ID_PERLE 0x155f -#define PCI_SUBDEVICE_ID_PCI_RAS4 0xf001 -#define PCI_SUBDEVICE_ID_PCI_RAS8 0xf010 - -#define PCI_VENDOR_ID_SYBA 0x1592 -#define PCI_DEVICE_ID_SYBA_2P_EPP 0x0782 -#define PCI_DEVICE_ID_SYBA_1P_ECP 0x0783 - -#define PCI_VENDOR_ID_MORETON 0x15aa -#define PCI_DEVICE_ID_RASTEL_2PORT 0x2000 - -#define PCI_VENDOR_ID_ZOLTRIX 0x15b0 -#define PCI_DEVICE_ID_ZOLTRIX_2BD0 0x2bd0 - -#define PCI_VENDOR_ID_MELLANOX 0x15b3 -#define PCI_DEVICE_ID_MELLANOX_TAVOR 0x5a44 -#define PCI_DEVICE_ID_MELLANOX_TAVOR_BRIDGE 0x5a46 -#define PCI_DEVICE_ID_MELLANOX_ARBEL_COMPAT 0x6278 -#define PCI_DEVICE_ID_MELLANOX_ARBEL 0x6282 -#define PCI_DEVICE_ID_MELLANOX_SINAI_OLD 0x5e8c -#define PCI_DEVICE_ID_MELLANOX_SINAI 0x6274 - -#define PCI_VENDOR_ID_QUICKNET 0x15e2 -#define PCI_DEVICE_ID_QUICKNET_XJ 0x0500 - -/* - * ADDI-DATA GmbH communication cards <info@addi-data.com> - */ -#define PCI_VENDOR_ID_ADDIDATA_OLD 0x10E8 -#define PCI_VENDOR_ID_ADDIDATA 0x15B8 -#define PCI_DEVICE_ID_ADDIDATA_APCI7500 0x7000 -#define PCI_DEVICE_ID_ADDIDATA_APCI7420 0x7001 -#define PCI_DEVICE_ID_ADDIDATA_APCI7300 0x7002 -#define PCI_DEVICE_ID_ADDIDATA_APCI7800 0x818E -#define PCI_DEVICE_ID_ADDIDATA_APCI7500_2 0x7009 -#define PCI_DEVICE_ID_ADDIDATA_APCI7420_2 0x700A -#define PCI_DEVICE_ID_ADDIDATA_APCI7300_2 0x700B -#define PCI_DEVICE_ID_ADDIDATA_APCI7500_3 0x700C -#define PCI_DEVICE_ID_ADDIDATA_APCI7420_3 0x700D -#define PCI_DEVICE_ID_ADDIDATA_APCI7300_3 0x700E -#define PCI_DEVICE_ID_ADDIDATA_APCI7800_3 0x700F - -#define PCI_VENDOR_ID_PDC 0x15e9 - -#define PCI_VENDOR_ID_FARSITE 0x1619 -#define PCI_DEVICE_ID_FARSITE_T2P 0x0400 -#define PCI_DEVICE_ID_FARSITE_T4P 0x0440 -#define PCI_DEVICE_ID_FARSITE_T1U 0x0610 -#define PCI_DEVICE_ID_FARSITE_T2U 0x0620 -#define PCI_DEVICE_ID_FARSITE_T4U 0x0640 -#define PCI_DEVICE_ID_FARSITE_TE1 0x1610 -#define PCI_DEVICE_ID_FARSITE_TE1C 0x1612 - -#define PCI_VENDOR_ID_ARIMA 0x161f - -#define PCI_VENDOR_ID_BROCADE 0x1657 - -#define PCI_VENDOR_ID_SIBYTE 0x166d -#define PCI_DEVICE_ID_BCM1250_PCI 0x0001 -#define PCI_DEVICE_ID_BCM1250_HT 0x0002 - -#define PCI_VENDOR_ID_ATHEROS 0x168c - -#define PCI_VENDOR_ID_NETCELL 0x169c -#define PCI_DEVICE_ID_REVOLUTION 0x0044 - -#define PCI_VENDOR_ID_CENATEK 0x16CA -#define PCI_DEVICE_ID_CENATEK_IDE 0x0001 - -#define PCI_VENDOR_ID_VITESSE 0x1725 -#define PCI_DEVICE_ID_VITESSE_VSC7174 0x7174 - -#define PCI_VENDOR_ID_LINKSYS 0x1737 -#define PCI_DEVICE_ID_LINKSYS_EG1064 0x1064 - -#define PCI_VENDOR_ID_ALTIMA 0x173b -#define PCI_DEVICE_ID_ALTIMA_AC1000 0x03e8 -#define PCI_DEVICE_ID_ALTIMA_AC1001 0x03e9 -#define PCI_DEVICE_ID_ALTIMA_AC9100 0x03ea -#define PCI_DEVICE_ID_ALTIMA_AC1003 0x03eb - -#define PCI_VENDOR_ID_BELKIN 0x1799 -#define PCI_DEVICE_ID_BELKIN_F5D7010V7 0x701f - -#define PCI_VENDOR_ID_RDC 0x17f3 -#define PCI_DEVICE_ID_RDC_R6020 0x6020 -#define PCI_DEVICE_ID_RDC_R6030 0x6030 -#define PCI_DEVICE_ID_RDC_R6040 0x6040 -#define PCI_DEVICE_ID_RDC_R6060 0x6060 -#define PCI_DEVICE_ID_RDC_R6061 0x6061 - -#define PCI_VENDOR_ID_LENOVO 0x17aa - -#define PCI_VENDOR_ID_ARECA 0x17d3 -#define PCI_DEVICE_ID_ARECA_1110 0x1110 -#define PCI_DEVICE_ID_ARECA_1120 0x1120 -#define PCI_DEVICE_ID_ARECA_1130 0x1130 -#define PCI_DEVICE_ID_ARECA_1160 0x1160 -#define PCI_DEVICE_ID_ARECA_1170 0x1170 -#define PCI_DEVICE_ID_ARECA_1200 0x1200 -#define PCI_DEVICE_ID_ARECA_1201 0x1201 -#define PCI_DEVICE_ID_ARECA_1202 0x1202 -#define PCI_DEVICE_ID_ARECA_1210 0x1210 -#define PCI_DEVICE_ID_ARECA_1220 0x1220 -#define PCI_DEVICE_ID_ARECA_1230 0x1230 -#define PCI_DEVICE_ID_ARECA_1260 0x1260 -#define PCI_DEVICE_ID_ARECA_1270 0x1270 -#define PCI_DEVICE_ID_ARECA_1280 0x1280 -#define PCI_DEVICE_ID_ARECA_1380 0x1380 -#define PCI_DEVICE_ID_ARECA_1381 0x1381 -#define PCI_DEVICE_ID_ARECA_1680 0x1680 -#define PCI_DEVICE_ID_ARECA_1681 0x1681 - -#define PCI_VENDOR_ID_S2IO 0x17d5 -#define PCI_DEVICE_ID_S2IO_WIN 0x5731 -#define PCI_DEVICE_ID_S2IO_UNI 0x5831 -#define PCI_DEVICE_ID_HERC_WIN 0x5732 -#define PCI_DEVICE_ID_HERC_UNI 0x5832 - -#define PCI_VENDOR_ID_SITECOM 0x182d -#define PCI_DEVICE_ID_SITECOM_DC105V2 0x3069 - -#define PCI_VENDOR_ID_TOPSPIN 0x1867 - -#define PCI_VENDOR_ID_TDI 0x192E -#define PCI_DEVICE_ID_TDI_EHCI 0x0101 - -#define PCI_VENDOR_ID_FREESCALE 0x1957 -#define PCI_DEVICE_ID_MPC8548E 0x0012 -#define PCI_DEVICE_ID_MPC8548 0x0013 -#define PCI_DEVICE_ID_MPC8543E 0x0014 -#define PCI_DEVICE_ID_MPC8543 0x0015 -#define PCI_DEVICE_ID_MPC8547E 0x0018 -#define PCI_DEVICE_ID_MPC8545E 0x0019 -#define PCI_DEVICE_ID_MPC8545 0x001a -#define PCI_DEVICE_ID_MPC8568E 0x0020 -#define PCI_DEVICE_ID_MPC8568 0x0021 -#define PCI_DEVICE_ID_MPC8567E 0x0022 -#define PCI_DEVICE_ID_MPC8567 0x0023 -#define PCI_DEVICE_ID_MPC8533E 0x0030 -#define PCI_DEVICE_ID_MPC8533 0x0031 -#define PCI_DEVICE_ID_MPC8544E 0x0032 -#define PCI_DEVICE_ID_MPC8544 0x0033 -#define PCI_DEVICE_ID_MPC8572E 0x0040 -#define PCI_DEVICE_ID_MPC8572 0x0041 -#define PCI_DEVICE_ID_MPC8536E 0x0050 -#define PCI_DEVICE_ID_MPC8536 0x0051 -#define PCI_DEVICE_ID_MPC8641 0x7010 -#define PCI_DEVICE_ID_MPC8641D 0x7011 -#define PCI_DEVICE_ID_MPC8610 0x7018 - -#define PCI_VENDOR_ID_PASEMI 0x1959 - -#define PCI_VENDOR_ID_ATTANSIC 0x1969 -#define PCI_DEVICE_ID_ATTANSIC_L1 0x1048 -#define PCI_DEVICE_ID_ATTANSIC_L2 0x2048 - -#define PCI_VENDOR_ID_JMICRON 0x197B -#define PCI_DEVICE_ID_JMICRON_JMB360 0x2360 -#define PCI_DEVICE_ID_JMICRON_JMB361 0x2361 -#define PCI_DEVICE_ID_JMICRON_JMB363 0x2363 -#define PCI_DEVICE_ID_JMICRON_JMB365 0x2365 -#define PCI_DEVICE_ID_JMICRON_JMB366 0x2366 -#define PCI_DEVICE_ID_JMICRON_JMB368 0x2368 -#define PCI_DEVICE_ID_JMICRON_JMB38X_SD 0x2381 -#define PCI_DEVICE_ID_JMICRON_JMB38X_MMC 0x2382 -#define PCI_DEVICE_ID_JMICRON_JMB38X_MS 0x2383 - -#define PCI_VENDOR_ID_KORENIX 0x1982 -#define PCI_DEVICE_ID_KORENIX_JETCARDF0 0x1600 -#define PCI_DEVICE_ID_KORENIX_JETCARDF1 0x16ff - -#define PCI_VENDOR_ID_REDHAT 0x1b36 -#define PCI_DEVICE_ID_REDHAT_ROOT_PORT 0x000C -#define PCI_DEVICE_ID_REDHAT_BRIDGE 0x0001 - -#define PCI_VENDOR_ID_TEKRAM 0x1de1 -#define PCI_DEVICE_ID_TEKRAM_DC290 0xdc29 - -#define PCI_VENDOR_ID_TEHUTI 0x1fc9 -#define PCI_DEVICE_ID_TEHUTI_3009 0x3009 -#define PCI_DEVICE_ID_TEHUTI_3010 0x3010 -#define PCI_DEVICE_ID_TEHUTI_3014 0x3014 - -#define PCI_VENDOR_ID_HINT 0x3388 -#define PCI_DEVICE_ID_HINT_VXPROII_IDE 0x8013 - -#define PCI_VENDOR_ID_3DLABS 0x3d3d -#define PCI_DEVICE_ID_3DLABS_PERMEDIA2 0x0007 -#define PCI_DEVICE_ID_3DLABS_PERMEDIA2V 0x0009 - -#define PCI_VENDOR_ID_NETXEN 0x4040 -#define PCI_DEVICE_ID_NX2031_10GXSR 0x0001 -#define PCI_DEVICE_ID_NX2031_10GCX4 0x0002 -#define PCI_DEVICE_ID_NX2031_4GCU 0x0003 -#define PCI_DEVICE_ID_NX2031_IMEZ 0x0004 -#define PCI_DEVICE_ID_NX2031_HMEZ 0x0005 -#define PCI_DEVICE_ID_NX2031_XG_MGMT 0x0024 -#define PCI_DEVICE_ID_NX2031_XG_MGMT2 0x0025 -#define PCI_DEVICE_ID_NX3031 0x0100 - -#define PCI_VENDOR_ID_AKS 0x416c -#define PCI_DEVICE_ID_AKS_ALADDINCARD 0x0100 - -#define PCI_VENDOR_ID_S3 0x5333 -#define PCI_DEVICE_ID_S3_TRIO 0x8811 -#define PCI_DEVICE_ID_S3_868 0x8880 -#define PCI_DEVICE_ID_S3_968 0x88f0 -#define PCI_DEVICE_ID_S3_SAVAGE4 0x8a25 -#define PCI_DEVICE_ID_S3_PROSAVAGE8 0x8d04 -#define PCI_DEVICE_ID_S3_SONICVIBES 0xca00 - -#define PCI_VENDOR_ID_DUNORD 0x5544 -#define PCI_DEVICE_ID_DUNORD_I3000 0x0001 - -#define PCI_VENDOR_ID_DCI 0x6666 -#define PCI_DEVICE_ID_DCI_PCCOM4 0x0001 -#define PCI_DEVICE_ID_DCI_PCCOM8 0x0002 -#define PCI_DEVICE_ID_DCI_PCCOM2 0x0004 - -#define PCI_VENDOR_ID_INTEL 0x8086 -#define PCI_DEVICE_ID_INTEL_EESSC 0x0008 -#define PCI_DEVICE_ID_INTEL_PXHD_0 0x0320 -#define PCI_DEVICE_ID_INTEL_PXHD_1 0x0321 -#define PCI_DEVICE_ID_INTEL_PXH_0 0x0329 -#define PCI_DEVICE_ID_INTEL_PXH_1 0x032A -#define PCI_DEVICE_ID_INTEL_PXHV 0x032C -#define PCI_DEVICE_ID_INTEL_82375 0x0482 -#define PCI_DEVICE_ID_INTEL_82424 0x0483 -#define PCI_DEVICE_ID_INTEL_82378 0x0484 -#define PCI_DEVICE_ID_INTEL_I960 0x0960 -#define PCI_DEVICE_ID_INTEL_I960RM 0x0962 -#define PCI_DEVICE_ID_INTEL_82815_MC 0x1130 -#define PCI_DEVICE_ID_INTEL_82815_CGC 0x1132 -#define PCI_DEVICE_ID_INTEL_82092AA_0 0x1221 -#define PCI_DEVICE_ID_INTEL_7505_0 0x2550 -#define PCI_DEVICE_ID_INTEL_7205_0 0x255d -#define PCI_DEVICE_ID_INTEL_82437 0x122d -#define PCI_DEVICE_ID_INTEL_82371FB_0 0x122e -#define PCI_DEVICE_ID_INTEL_82371FB_1 0x1230 -#define PCI_DEVICE_ID_INTEL_82371MX 0x1234 -#define PCI_DEVICE_ID_INTEL_82441 0x1237 -#define PCI_DEVICE_ID_INTEL_82380FB 0x124b -#define PCI_DEVICE_ID_INTEL_82439 0x1250 -#define PCI_DEVICE_ID_INTEL_80960_RP 0x1960 -#define PCI_DEVICE_ID_INTEL_82840_HB 0x1a21 -#define PCI_DEVICE_ID_INTEL_82845_HB 0x1a30 -#define PCI_DEVICE_ID_INTEL_IOAT 0x1a38 -#define PCI_DEVICE_ID_INTEL_82801AA_0 0x2410 -#define PCI_DEVICE_ID_INTEL_82801AA_1 0x2411 -#define PCI_DEVICE_ID_INTEL_82801AA_3 0x2413 -#define PCI_DEVICE_ID_INTEL_82801AA_5 0x2415 -#define PCI_DEVICE_ID_INTEL_82801AA_6 0x2416 -#define PCI_DEVICE_ID_INTEL_82801AA_8 0x2418 -#define PCI_DEVICE_ID_INTEL_82801AB_0 0x2420 -#define PCI_DEVICE_ID_INTEL_82801AB_1 0x2421 -#define PCI_DEVICE_ID_INTEL_82801AB_3 0x2423 -#define PCI_DEVICE_ID_INTEL_82801AB_5 0x2425 -#define PCI_DEVICE_ID_INTEL_82801AB_6 0x2426 -#define PCI_DEVICE_ID_INTEL_82801AB_8 0x2428 -#define PCI_DEVICE_ID_INTEL_82801BA_0 0x2440 -#define PCI_DEVICE_ID_INTEL_82801BA_2 0x2443 -#define PCI_DEVICE_ID_INTEL_82801BA_4 0x2445 -#define PCI_DEVICE_ID_INTEL_82801BA_6 0x2448 -#define PCI_DEVICE_ID_INTEL_82801BA_8 0x244a -#define PCI_DEVICE_ID_INTEL_82801BA_9 0x244b -#define PCI_DEVICE_ID_INTEL_82801BA_10 0x244c -#define PCI_DEVICE_ID_INTEL_82801BA_11 0x244e -#define PCI_DEVICE_ID_INTEL_82801E_0 0x2450 -#define PCI_DEVICE_ID_INTEL_82801E_11 0x245b -#define PCI_DEVICE_ID_INTEL_82801CA_0 0x2480 -#define PCI_DEVICE_ID_INTEL_82801CA_3 0x2483 -#define PCI_DEVICE_ID_INTEL_82801CA_5 0x2485 -#define PCI_DEVICE_ID_INTEL_82801CA_6 0x2486 -#define PCI_DEVICE_ID_INTEL_82801CA_10 0x248a -#define PCI_DEVICE_ID_INTEL_82801CA_11 0x248b -#define PCI_DEVICE_ID_INTEL_82801CA_12 0x248c -#define PCI_DEVICE_ID_INTEL_82801DB_0 0x24c0 -#define PCI_DEVICE_ID_INTEL_82801DB_1 0x24c1 -#define PCI_DEVICE_ID_INTEL_82801DB_3 0x24c3 -#define PCI_DEVICE_ID_INTEL_82801DB_5 0x24c5 -#define PCI_DEVICE_ID_INTEL_82801DB_6 0x24c6 -#define PCI_DEVICE_ID_INTEL_82801DB_9 0x24c9 -#define PCI_DEVICE_ID_INTEL_82801DB_10 0x24ca -#define PCI_DEVICE_ID_INTEL_82801DB_11 0x24cb -#define PCI_DEVICE_ID_INTEL_82801DB_12 0x24cc -#define PCI_DEVICE_ID_INTEL_82801EB_0 0x24d0 -#define PCI_DEVICE_ID_INTEL_82801EB_1 0x24d1 -#define PCI_DEVICE_ID_INTEL_82801EB_3 0x24d3 -#define PCI_DEVICE_ID_INTEL_82801EB_5 0x24d5 -#define PCI_DEVICE_ID_INTEL_82801EB_6 0x24d6 -#define PCI_DEVICE_ID_INTEL_82801EB_11 0x24db -#define PCI_DEVICE_ID_INTEL_82801EB_12 0x24dc -#define PCI_DEVICE_ID_INTEL_82801EB_13 0x24dd -#define PCI_DEVICE_ID_INTEL_ESB_1 0x25a1 -#define PCI_DEVICE_ID_INTEL_ESB_2 0x25a2 -#define PCI_DEVICE_ID_INTEL_ESB_4 0x25a4 -#define PCI_DEVICE_ID_INTEL_ESB_5 0x25a6 -#define PCI_DEVICE_ID_INTEL_ESB_9 0x25ab -#define PCI_DEVICE_ID_INTEL_82820_HB 0x2500 -#define PCI_DEVICE_ID_INTEL_82820_UP_HB 0x2501 -#define PCI_DEVICE_ID_INTEL_82850_HB 0x2530 -#define PCI_DEVICE_ID_INTEL_82860_HB 0x2531 -#define PCI_DEVICE_ID_INTEL_E7501_MCH 0x254c -#define PCI_DEVICE_ID_INTEL_82845G_HB 0x2560 -#define PCI_DEVICE_ID_INTEL_82845G_IG 0x2562 -#define PCI_DEVICE_ID_INTEL_82865_HB 0x2570 -#define PCI_DEVICE_ID_INTEL_82865_IG 0x2572 -#define PCI_DEVICE_ID_INTEL_82875_HB 0x2578 -#define PCI_DEVICE_ID_INTEL_82915G_HB 0x2580 -#define PCI_DEVICE_ID_INTEL_82915G_IG 0x2582 -#define PCI_DEVICE_ID_INTEL_82915GM_HB 0x2590 -#define PCI_DEVICE_ID_INTEL_82915GM_IG 0x2592 -#define PCI_DEVICE_ID_INTEL_5000_ERR 0x25F0 -#define PCI_DEVICE_ID_INTEL_5000_FBD0 0x25F5 -#define PCI_DEVICE_ID_INTEL_5000_FBD1 0x25F6 -#define PCI_DEVICE_ID_INTEL_82945G_HB 0x2770 -#define PCI_DEVICE_ID_INTEL_82945G_IG 0x2772 -#define PCI_DEVICE_ID_INTEL_3000_HB 0x2778 -#define PCI_DEVICE_ID_INTEL_82945GM_HB 0x27A0 -#define PCI_DEVICE_ID_INTEL_82945GM_IG 0x27A2 -#define PCI_DEVICE_ID_INTEL_ICH6_0 0x2640 -#define PCI_DEVICE_ID_INTEL_ICH6_1 0x2641 -#define PCI_DEVICE_ID_INTEL_ICH6_2 0x2642 -#define PCI_DEVICE_ID_INTEL_ICH6_16 0x266a -#define PCI_DEVICE_ID_INTEL_ICH6_17 0x266d -#define PCI_DEVICE_ID_INTEL_ICH6_18 0x266e -#define PCI_DEVICE_ID_INTEL_ICH6_19 0x266f -#define PCI_DEVICE_ID_INTEL_ESB2_0 0x2670 -#define PCI_DEVICE_ID_INTEL_ESB2_14 0x2698 -#define PCI_DEVICE_ID_INTEL_ESB2_17 0x269b -#define PCI_DEVICE_ID_INTEL_ESB2_18 0x269e -#define PCI_DEVICE_ID_INTEL_ICH7_0 0x27b8 -#define PCI_DEVICE_ID_INTEL_ICH7_1 0x27b9 -#define PCI_DEVICE_ID_INTEL_ICH7_30 0x27b0 -#define PCI_DEVICE_ID_INTEL_ICH7_31 0x27bd -#define PCI_DEVICE_ID_INTEL_ICH7_17 0x27da -#define PCI_DEVICE_ID_INTEL_ICH7_19 0x27dd -#define PCI_DEVICE_ID_INTEL_ICH7_20 0x27de -#define PCI_DEVICE_ID_INTEL_ICH7_21 0x27df -#define PCI_DEVICE_ID_INTEL_ICH8_0 0x2810 -#define PCI_DEVICE_ID_INTEL_ICH8_1 0x2811 -#define PCI_DEVICE_ID_INTEL_ICH8_2 0x2812 -#define PCI_DEVICE_ID_INTEL_ICH8_3 0x2814 -#define PCI_DEVICE_ID_INTEL_ICH8_4 0x2815 -#define PCI_DEVICE_ID_INTEL_ICH8_5 0x283e -#define PCI_DEVICE_ID_INTEL_ICH8_6 0x2850 -#define PCI_DEVICE_ID_INTEL_ICH9_0 0x2910 -#define PCI_DEVICE_ID_INTEL_ICH9_1 0x2917 -#define PCI_DEVICE_ID_INTEL_ICH9_2 0x2912 -#define PCI_DEVICE_ID_INTEL_ICH9_3 0x2913 -#define PCI_DEVICE_ID_INTEL_ICH9_4 0x2914 -#define PCI_DEVICE_ID_INTEL_ICH9_5 0x2919 -#define PCI_DEVICE_ID_INTEL_ICH9_6 0x2930 -#define PCI_DEVICE_ID_INTEL_ICH9_7 0x2916 -#define PCI_DEVICE_ID_INTEL_ICH9_8 0x2918 -#define PCI_DEVICE_ID_INTEL_82855PM_HB 0x3340 -#define PCI_DEVICE_ID_INTEL_IOAT_TBG4 0x3429 -#define PCI_DEVICE_ID_INTEL_IOAT_TBG5 0x342a -#define PCI_DEVICE_ID_INTEL_IOAT_TBG6 0x342b -#define PCI_DEVICE_ID_INTEL_IOAT_TBG7 0x342c -#define PCI_DEVICE_ID_INTEL_IOAT_TBG0 0x3430 -#define PCI_DEVICE_ID_INTEL_IOAT_TBG1 0x3431 -#define PCI_DEVICE_ID_INTEL_IOAT_TBG2 0x3432 -#define PCI_DEVICE_ID_INTEL_IOAT_TBG3 0x3433 -#define PCI_DEVICE_ID_INTEL_82830_HB 0x3575 -#define PCI_DEVICE_ID_INTEL_82830_CGC 0x3577 -#define PCI_DEVICE_ID_INTEL_82855GM_HB 0x3580 -#define PCI_DEVICE_ID_INTEL_82855GM_IG 0x3582 -#define PCI_DEVICE_ID_INTEL_E7520_MCH 0x3590 -#define PCI_DEVICE_ID_INTEL_E7320_MCH 0x3592 -#define PCI_DEVICE_ID_INTEL_MCH_PA 0x3595 -#define PCI_DEVICE_ID_INTEL_MCH_PA1 0x3596 -#define PCI_DEVICE_ID_INTEL_MCH_PB 0x3597 -#define PCI_DEVICE_ID_INTEL_MCH_PB1 0x3598 -#define PCI_DEVICE_ID_INTEL_MCH_PC 0x3599 -#define PCI_DEVICE_ID_INTEL_MCH_PC1 0x359a -#define PCI_DEVICE_ID_INTEL_E7525_MCH 0x359e -#define PCI_DEVICE_ID_INTEL_IOAT_CNB 0x360b -#define PCI_DEVICE_ID_INTEL_FBD_CNB 0x360c -#define PCI_DEVICE_ID_INTEL_ICH10_0 0x3a14 -#define PCI_DEVICE_ID_INTEL_ICH10_1 0x3a16 -#define PCI_DEVICE_ID_INTEL_ICH10_2 0x3a18 -#define PCI_DEVICE_ID_INTEL_ICH10_3 0x3a1a -#define PCI_DEVICE_ID_INTEL_ICH10_4 0x3a30 -#define PCI_DEVICE_ID_INTEL_ICH10_5 0x3a60 -#define PCI_DEVICE_ID_INTEL_PCH_LPC_MIN 0x3b00 -#define PCI_DEVICE_ID_INTEL_PCH_LPC_MAX 0x3b1f -#define PCI_DEVICE_ID_INTEL_PCH_SMBUS 0x3b30 -#define PCI_DEVICE_ID_INTEL_IOAT_SNB 0x402f -#define PCI_DEVICE_ID_INTEL_5100_16 0x65f0 -#define PCI_DEVICE_ID_INTEL_5100_21 0x65f5 -#define PCI_DEVICE_ID_INTEL_5100_22 0x65f6 -#define PCI_DEVICE_ID_INTEL_5400_ERR 0x4030 -#define PCI_DEVICE_ID_INTEL_5400_FBD0 0x4035 -#define PCI_DEVICE_ID_INTEL_5400_FBD1 0x4036 -#define PCI_DEVICE_ID_INTEL_IOAT_SCNB 0x65ff -#define PCI_DEVICE_ID_INTEL_TOLAPAI_0 0x5031 -#define PCI_DEVICE_ID_INTEL_TOLAPAI_1 0x5032 -#define PCI_DEVICE_ID_INTEL_82371SB_0 0x7000 -#define PCI_DEVICE_ID_INTEL_82371SB_1 0x7010 -#define PCI_DEVICE_ID_INTEL_82371SB_2 0x7020 -#define PCI_DEVICE_ID_INTEL_82437VX 0x7030 -#define PCI_DEVICE_ID_INTEL_82439TX 0x7100 -#define PCI_DEVICE_ID_INTEL_82371AB_0 0x7110 -#define PCI_DEVICE_ID_INTEL_82371AB 0x7111 -#define PCI_DEVICE_ID_INTEL_82371AB_2 0x7112 -#define PCI_DEVICE_ID_INTEL_82371AB_3 0x7113 -#define PCI_DEVICE_ID_INTEL_82810_MC1 0x7120 -#define PCI_DEVICE_ID_INTEL_82810_IG1 0x7121 -#define PCI_DEVICE_ID_INTEL_82810_MC3 0x7122 -#define PCI_DEVICE_ID_INTEL_82810_IG3 0x7123 -#define PCI_DEVICE_ID_INTEL_82810E_MC 0x7124 -#define PCI_DEVICE_ID_INTEL_82810E_IG 0x7125 -#define PCI_DEVICE_ID_INTEL_82443LX_0 0x7180 -#define PCI_DEVICE_ID_INTEL_82443LX_1 0x7181 -#define PCI_DEVICE_ID_INTEL_82443BX_0 0x7190 -#define PCI_DEVICE_ID_INTEL_82443BX_1 0x7191 -#define PCI_DEVICE_ID_INTEL_82443BX_2 0x7192 -#define PCI_DEVICE_ID_INTEL_440MX 0x7195 -#define PCI_DEVICE_ID_INTEL_440MX_6 0x7196 -#define PCI_DEVICE_ID_INTEL_82443MX_0 0x7198 -#define PCI_DEVICE_ID_INTEL_82443MX_1 0x7199 -#define PCI_DEVICE_ID_INTEL_82443MX_3 0x719b -#define PCI_DEVICE_ID_INTEL_82443GX_0 0x71a0 -#define PCI_DEVICE_ID_INTEL_82443GX_2 0x71a2 -#define PCI_DEVICE_ID_INTEL_82372FB_1 0x7601 -#define PCI_DEVICE_ID_INTEL_SCH_LPC 0x8119 -#define PCI_DEVICE_ID_INTEL_SCH_IDE 0x811a -#define PCI_DEVICE_ID_INTEL_82454GX 0x84c4 -#define PCI_DEVICE_ID_INTEL_82450GX 0x84c5 -#define PCI_DEVICE_ID_INTEL_82451NX 0x84ca -#define PCI_DEVICE_ID_INTEL_82454NX 0x84cb -#define PCI_DEVICE_ID_INTEL_84460GX 0x84ea -#define PCI_DEVICE_ID_INTEL_IXP4XX 0x8500 -#define PCI_DEVICE_ID_INTEL_IXP2800 0x9004 -#define PCI_DEVICE_ID_INTEL_S21152BB 0xb152 - -#define PCI_VENDOR_ID_SCALEMP 0x8686 -#define PCI_DEVICE_ID_SCALEMP_VSMP_CTL 0x1010 - -#define PCI_VENDOR_ID_COMPUTONE 0x8e0e -#define PCI_DEVICE_ID_COMPUTONE_IP2EX 0x0291 -#define PCI_DEVICE_ID_COMPUTONE_PG 0x0302 -#define PCI_SUBVENDOR_ID_COMPUTONE 0x8e0e -#define PCI_SUBDEVICE_ID_COMPUTONE_PG4 0x0001 -#define PCI_SUBDEVICE_ID_COMPUTONE_PG8 0x0002 -#define PCI_SUBDEVICE_ID_COMPUTONE_PG6 0x0003 - -#define PCI_VENDOR_ID_KTI 0x8e2e - -#define PCI_VENDOR_ID_ADAPTEC 0x9004 -#define PCI_DEVICE_ID_ADAPTEC_7810 0x1078 -#define PCI_DEVICE_ID_ADAPTEC_7821 0x2178 -#define PCI_DEVICE_ID_ADAPTEC_38602 0x3860 -#define PCI_DEVICE_ID_ADAPTEC_7850 0x5078 -#define PCI_DEVICE_ID_ADAPTEC_7855 0x5578 -#define PCI_DEVICE_ID_ADAPTEC_3860 0x6038 -#define PCI_DEVICE_ID_ADAPTEC_1480A 0x6075 -#define PCI_DEVICE_ID_ADAPTEC_7860 0x6078 -#define PCI_DEVICE_ID_ADAPTEC_7861 0x6178 -#define PCI_DEVICE_ID_ADAPTEC_7870 0x7078 -#define PCI_DEVICE_ID_ADAPTEC_7871 0x7178 -#define PCI_DEVICE_ID_ADAPTEC_7872 0x7278 -#define PCI_DEVICE_ID_ADAPTEC_7873 0x7378 -#define PCI_DEVICE_ID_ADAPTEC_7874 0x7478 -#define PCI_DEVICE_ID_ADAPTEC_7895 0x7895 -#define PCI_DEVICE_ID_ADAPTEC_7880 0x8078 -#define PCI_DEVICE_ID_ADAPTEC_7881 0x8178 -#define PCI_DEVICE_ID_ADAPTEC_7882 0x8278 -#define PCI_DEVICE_ID_ADAPTEC_7883 0x8378 -#define PCI_DEVICE_ID_ADAPTEC_7884 0x8478 -#define PCI_DEVICE_ID_ADAPTEC_7885 0x8578 -#define PCI_DEVICE_ID_ADAPTEC_7886 0x8678 -#define PCI_DEVICE_ID_ADAPTEC_7887 0x8778 -#define PCI_DEVICE_ID_ADAPTEC_7888 0x8878 - -#define PCI_VENDOR_ID_ADAPTEC2 0x9005 -#define PCI_DEVICE_ID_ADAPTEC2_2940U2 0x0010 -#define PCI_DEVICE_ID_ADAPTEC2_2930U2 0x0011 -#define PCI_DEVICE_ID_ADAPTEC2_7890B 0x0013 -#define PCI_DEVICE_ID_ADAPTEC2_7890 0x001f -#define PCI_DEVICE_ID_ADAPTEC2_3940U2 0x0050 -#define PCI_DEVICE_ID_ADAPTEC2_3950U2D 0x0051 -#define PCI_DEVICE_ID_ADAPTEC2_7896 0x005f -#define PCI_DEVICE_ID_ADAPTEC2_7892A 0x0080 -#define PCI_DEVICE_ID_ADAPTEC2_7892B 0x0081 -#define PCI_DEVICE_ID_ADAPTEC2_7892D 0x0083 -#define PCI_DEVICE_ID_ADAPTEC2_7892P 0x008f -#define PCI_DEVICE_ID_ADAPTEC2_7899A 0x00c0 -#define PCI_DEVICE_ID_ADAPTEC2_7899B 0x00c1 -#define PCI_DEVICE_ID_ADAPTEC2_7899D 0x00c3 -#define PCI_DEVICE_ID_ADAPTEC2_7899P 0x00cf -#define PCI_DEVICE_ID_ADAPTEC2_OBSIDIAN 0x0500 -#define PCI_DEVICE_ID_ADAPTEC2_SCAMP 0x0503 - -#define PCI_VENDOR_ID_HOLTEK 0x9412 -#define PCI_DEVICE_ID_HOLTEK_6565 0x6565 - -#define PCI_VENDOR_ID_NETMOS 0x9710 -#define PCI_DEVICE_ID_NETMOS_9705 0x9705 -#define PCI_DEVICE_ID_NETMOS_9715 0x9715 -#define PCI_DEVICE_ID_NETMOS_9735 0x9735 -#define PCI_DEVICE_ID_NETMOS_9745 0x9745 -#define PCI_DEVICE_ID_NETMOS_9755 0x9755 -#define PCI_DEVICE_ID_NETMOS_9805 0x9805 -#define PCI_DEVICE_ID_NETMOS_9815 0x9815 -#define PCI_DEVICE_ID_NETMOS_9835 0x9835 -#define PCI_DEVICE_ID_NETMOS_9845 0x9845 -#define PCI_DEVICE_ID_NETMOS_9855 0x9855 - -#define PCI_VENDOR_ID_3COM_2 0xa727 - -#define PCI_VENDOR_ID_DIGIUM 0xd161 -#define PCI_DEVICE_ID_DIGIUM_HFC4S 0xb410 - -#define PCI_SUBVENDOR_ID_EXSYS 0xd84d -#define PCI_SUBDEVICE_ID_EXSYS_4014 0x4014 -#define PCI_SUBDEVICE_ID_EXSYS_4055 0x4055 - -#define PCI_VENDOR_ID_TIGERJET 0xe159 -#define PCI_DEVICE_ID_TIGERJET_300 0x0001 -#define PCI_DEVICE_ID_TIGERJET_100 0x0002 - -#define PCI_VENDOR_ID_XILINX_RME 0xea60 -#define PCI_DEVICE_ID_RME_DIGI32 0x9896 -#define PCI_DEVICE_ID_RME_DIGI32_PRO 0x9897 -#define PCI_DEVICE_ID_RME_DIGI32_8 0x9898 - -#define PCI_VENDOR_ID_REDHAT_QUMRANET 0x1af4 -/* virtio 0.9.5 ids (legacy/transitional devices) */ -#define PCI_DEVICE_ID_VIRTIO_BLK_09 0x1001 -#define PCI_DEVICE_ID_VIRTIO_SCSI_09 0x1004 -/* virtio 1.0 ids (modern devices) */ -#define PCI_DEVICE_ID_VIRTIO_BLK_10 0x1042 -#define PCI_DEVICE_ID_VIRTIO_SCSI_10 0x1048 - -#define PCI_VENDOR_ID_VMWARE 0x15ad -#define PCI_DEVICE_ID_VMWARE_PVSCSI 0x07C0 diff --git a/payloads/external/SeaBIOS/src/hw/pci_regs.h b/payloads/external/SeaBIOS/src/hw/pci_regs.h deleted file mode 100644 index e5effd47..00000000 --- a/payloads/external/SeaBIOS/src/hw/pci_regs.h +++ /dev/null @@ -1,556 +0,0 @@ -/* - * pci_regs.h - * - * PCI standard defines - * Copyright 1994, Drew Eckhardt - * Copyright 1997--1999 Martin Mares <mj@ucw.cz> - * - * For more information, please consult the following manuals (look at - * http://www.pcisig.com/ for how to get them): - * - * PCI BIOS Specification - * PCI Local Bus Specification - * PCI to PCI Bridge Specification - * PCI System Design Guide - * - * For hypertransport information, please consult the following manuals - * from http://www.hypertransport.org - * - * The Hypertransport I/O Link Specification - */ - -#ifndef LINUX_PCI_REGS_H -#define LINUX_PCI_REGS_H - -/* - * Under PCI, each device has 256 bytes of configuration address space, - * of which the first 64 bytes are standardized as follows: - */ -#define PCI_VENDOR_ID 0x00 /* 16 bits */ -#define PCI_DEVICE_ID 0x02 /* 16 bits */ -#define PCI_COMMAND 0x04 /* 16 bits */ -#define PCI_COMMAND_IO 0x1 /* Enable response in I/O space */ -#define PCI_COMMAND_MEMORY 0x2 /* Enable response in Memory space */ -#define PCI_COMMAND_MASTER 0x4 /* Enable bus mastering */ -#define PCI_COMMAND_SPECIAL 0x8 /* Enable response to special cycles */ -#define PCI_COMMAND_INVALIDATE 0x10 /* Use memory write and invalidate */ -#define PCI_COMMAND_VGA_PALETTE 0x20 /* Enable palette snooping */ -#define PCI_COMMAND_PARITY 0x40 /* Enable parity checking */ -#define PCI_COMMAND_WAIT 0x80 /* Enable address/data stepping */ -#define PCI_COMMAND_SERR 0x100 /* Enable SERR */ -#define PCI_COMMAND_FAST_BACK 0x200 /* Enable back-to-back writes */ -#define PCI_COMMAND_INTX_DISABLE 0x400 /* INTx Emulation Disable */ - -#define PCI_STATUS 0x06 /* 16 bits */ -#define PCI_STATUS_CAP_LIST 0x10 /* Support Capability List */ -#define PCI_STATUS_66MHZ 0x20 /* Support 66 Mhz PCI 2.1 bus */ -#define PCI_STATUS_UDF 0x40 /* Support User Definable Features [obsolete] */ -#define PCI_STATUS_FAST_BACK 0x80 /* Accept fast-back to back */ -#define PCI_STATUS_PARITY 0x100 /* Detected parity error */ -#define PCI_STATUS_DEVSEL_MASK 0x600 /* DEVSEL timing */ -#define PCI_STATUS_DEVSEL_FAST 0x000 -#define PCI_STATUS_DEVSEL_MEDIUM 0x200 -#define PCI_STATUS_DEVSEL_SLOW 0x400 -#define PCI_STATUS_SIG_TARGET_ABORT 0x800 /* Set on target abort */ -#define PCI_STATUS_REC_TARGET_ABORT 0x1000 /* Master ack of " */ -#define PCI_STATUS_REC_MASTER_ABORT 0x2000 /* Set on master abort */ -#define PCI_STATUS_SIG_SYSTEM_ERROR 0x4000 /* Set when we drive SERR */ -#define PCI_STATUS_DETECTED_PARITY 0x8000 /* Set on parity error */ - -#define PCI_CLASS_REVISION 0x08 /* High 24 bits are class, low 8 revision */ -#define PCI_REVISION_ID 0x08 /* Revision ID */ -#define PCI_CLASS_PROG 0x09 /* Reg. Level Programming Interface */ -#define PCI_CLASS_DEVICE 0x0a /* Device class */ - -#define PCI_CACHE_LINE_SIZE 0x0c /* 8 bits */ -#define PCI_LATENCY_TIMER 0x0d /* 8 bits */ -#define PCI_HEADER_TYPE 0x0e /* 8 bits */ -#define PCI_HEADER_TYPE_NORMAL 0 -#define PCI_HEADER_TYPE_BRIDGE 1 -#define PCI_HEADER_TYPE_CARDBUS 2 - -#define PCI_BIST 0x0f /* 8 bits */ -#define PCI_BIST_CODE_MASK 0x0f /* Return result */ -#define PCI_BIST_START 0x40 /* 1 to start BIST, 2 secs or less */ -#define PCI_BIST_CAPABLE 0x80 /* 1 if BIST capable */ - -/* - * Base addresses specify locations in memory or I/O space. - * Decoded size can be determined by writing a value of - * 0xffffffff to the register, and reading it back. Only - * 1 bits are decoded. - */ -#define PCI_BASE_ADDRESS_0 0x10 /* 32 bits */ -#define PCI_BASE_ADDRESS_1 0x14 /* 32 bits [htype 0,1 only] */ -#define PCI_BASE_ADDRESS_2 0x18 /* 32 bits [htype 0 only] */ -#define PCI_BASE_ADDRESS_3 0x1c /* 32 bits */ -#define PCI_BASE_ADDRESS_4 0x20 /* 32 bits */ -#define PCI_BASE_ADDRESS_5 0x24 /* 32 bits */ -#define PCI_BASE_ADDRESS_SPACE 0x01 /* 0 = memory, 1 = I/O */ -#define PCI_BASE_ADDRESS_SPACE_IO 0x01 -#define PCI_BASE_ADDRESS_SPACE_MEMORY 0x00 -#define PCI_BASE_ADDRESS_MEM_TYPE_MASK 0x06 -#define PCI_BASE_ADDRESS_MEM_TYPE_32 0x00 /* 32 bit address */ -#define PCI_BASE_ADDRESS_MEM_TYPE_1M 0x02 /* Below 1M [obsolete] */ -#define PCI_BASE_ADDRESS_MEM_TYPE_64 0x04 /* 64 bit address */ -#define PCI_BASE_ADDRESS_MEM_PREFETCH 0x08 /* prefetchable? */ -#define PCI_BASE_ADDRESS_MEM_MASK (~0x0fUL) -#define PCI_BASE_ADDRESS_IO_MASK (~0x03UL) -/* bit 1 is reserved if address_space = 1 */ - -/* Header type 0 (normal devices) */ -#define PCI_CARDBUS_CIS 0x28 -#define PCI_SUBSYSTEM_VENDOR_ID 0x2c -#define PCI_SUBSYSTEM_ID 0x2e -#define PCI_ROM_ADDRESS 0x30 /* Bits 31..11 are address, 10..1 reserved */ -#define PCI_ROM_ADDRESS_ENABLE 0x01 -#define PCI_ROM_ADDRESS_MASK (~0x7ffUL) - -#define PCI_CAPABILITY_LIST 0x34 /* Offset of first capability list entry */ - -/* 0x35-0x3b are reserved */ -#define PCI_INTERRUPT_LINE 0x3c /* 8 bits */ -#define PCI_INTERRUPT_PIN 0x3d /* 8 bits */ -#define PCI_MIN_GNT 0x3e /* 8 bits */ -#define PCI_MAX_LAT 0x3f /* 8 bits */ - -/* Header type 1 (PCI-to-PCI bridges) */ -#define PCI_PRIMARY_BUS 0x18 /* Primary bus number */ -#define PCI_SECONDARY_BUS 0x19 /* Secondary bus number */ -#define PCI_SUBORDINATE_BUS 0x1a /* Highest bus number behind the bridge */ -#define PCI_SEC_LATENCY_TIMER 0x1b /* Latency timer for secondary interface */ -#define PCI_IO_BASE 0x1c /* I/O range behind the bridge */ -#define PCI_IO_LIMIT 0x1d -#define PCI_IO_RANGE_TYPE_MASK 0x0fUL /* I/O bridging type */ -#define PCI_IO_RANGE_TYPE_16 0x00 -#define PCI_IO_RANGE_TYPE_32 0x01 -#define PCI_IO_RANGE_MASK (~0x0fUL) -#define PCI_SEC_STATUS 0x1e /* Secondary status register, only bit 14 used */ -#define PCI_MEMORY_BASE 0x20 /* Memory range behind */ -#define PCI_MEMORY_LIMIT 0x22 -#define PCI_MEMORY_RANGE_TYPE_MASK 0x0fUL -#define PCI_MEMORY_RANGE_MASK (~0x0fUL) -#define PCI_PREF_MEMORY_BASE 0x24 /* Prefetchable memory range behind */ -#define PCI_PREF_MEMORY_LIMIT 0x26 -#define PCI_PREF_RANGE_TYPE_MASK 0x0fUL -#define PCI_PREF_RANGE_TYPE_32 0x00 -#define PCI_PREF_RANGE_TYPE_64 0x01 -#define PCI_PREF_RANGE_MASK (~0x0fUL) -#define PCI_PREF_BASE_UPPER32 0x28 /* Upper half of prefetchable memory range */ -#define PCI_PREF_LIMIT_UPPER32 0x2c -#define PCI_IO_BASE_UPPER16 0x30 /* Upper half of I/O addresses */ -#define PCI_IO_LIMIT_UPPER16 0x32 -/* 0x34 same as for htype 0 */ -/* 0x35-0x3b is reserved */ -#define PCI_ROM_ADDRESS1 0x38 /* Same as PCI_ROM_ADDRESS, but for htype 1 */ -/* 0x3c-0x3d are same as for htype 0 */ -#define PCI_BRIDGE_CONTROL 0x3e -#define PCI_BRIDGE_CTL_PARITY 0x01 /* Enable parity detection on secondary interface */ -#define PCI_BRIDGE_CTL_SERR 0x02 /* The same for SERR forwarding */ -#define PCI_BRIDGE_CTL_ISA 0x04 /* Enable ISA mode */ -#define PCI_BRIDGE_CTL_VGA 0x08 /* Forward VGA addresses */ -#define PCI_BRIDGE_CTL_MASTER_ABORT 0x20 /* Report master aborts */ -#define PCI_BRIDGE_CTL_BUS_RESET 0x40 /* Secondary bus reset */ -#define PCI_BRIDGE_CTL_FAST_BACK 0x80 /* Fast Back2Back enabled on secondary interface */ - -/* Header type 2 (CardBus bridges) */ -#define PCI_CB_CAPABILITY_LIST 0x14 -/* 0x15 reserved */ -#define PCI_CB_SEC_STATUS 0x16 /* Secondary status */ -#define PCI_CB_PRIMARY_BUS 0x18 /* PCI bus number */ -#define PCI_CB_CARD_BUS 0x19 /* CardBus bus number */ -#define PCI_CB_SUBORDINATE_BUS 0x1a /* Subordinate bus number */ -#define PCI_CB_LATENCY_TIMER 0x1b /* CardBus latency timer */ -#define PCI_CB_MEMORY_BASE_0 0x1c -#define PCI_CB_MEMORY_LIMIT_0 0x20 -#define PCI_CB_MEMORY_BASE_1 0x24 -#define PCI_CB_MEMORY_LIMIT_1 0x28 -#define PCI_CB_IO_BASE_0 0x2c -#define PCI_CB_IO_BASE_0_HI 0x2e -#define PCI_CB_IO_LIMIT_0 0x30 -#define PCI_CB_IO_LIMIT_0_HI 0x32 -#define PCI_CB_IO_BASE_1 0x34 -#define PCI_CB_IO_BASE_1_HI 0x36 -#define PCI_CB_IO_LIMIT_1 0x38 -#define PCI_CB_IO_LIMIT_1_HI 0x3a -#define PCI_CB_IO_RANGE_MASK (~0x03UL) -/* 0x3c-0x3d are same as for htype 0 */ -#define PCI_CB_BRIDGE_CONTROL 0x3e -#define PCI_CB_BRIDGE_CTL_PARITY 0x01 /* Similar to standard bridge control register */ -#define PCI_CB_BRIDGE_CTL_SERR 0x02 -#define PCI_CB_BRIDGE_CTL_ISA 0x04 -#define PCI_CB_BRIDGE_CTL_VGA 0x08 -#define PCI_CB_BRIDGE_CTL_MASTER_ABORT 0x20 -#define PCI_CB_BRIDGE_CTL_CB_RESET 0x40 /* CardBus reset */ -#define PCI_CB_BRIDGE_CTL_16BIT_INT 0x80 /* Enable interrupt for 16-bit cards */ -#define PCI_CB_BRIDGE_CTL_PREFETCH_MEM0 0x100 /* Prefetch enable for both memory regions */ -#define PCI_CB_BRIDGE_CTL_PREFETCH_MEM1 0x200 -#define PCI_CB_BRIDGE_CTL_POST_WRITES 0x400 -#define PCI_CB_SUBSYSTEM_VENDOR_ID 0x40 -#define PCI_CB_SUBSYSTEM_ID 0x42 -#define PCI_CB_LEGACY_MODE_BASE 0x44 /* 16-bit PC Card legacy mode base address (ExCa) */ -/* 0x48-0x7f reserved */ - -/* Capability lists */ - -#define PCI_CAP_LIST_ID 0 /* Capability ID */ -#define PCI_CAP_ID_PM 0x01 /* Power Management */ -#define PCI_CAP_ID_AGP 0x02 /* Accelerated Graphics Port */ -#define PCI_CAP_ID_VPD 0x03 /* Vital Product Data */ -#define PCI_CAP_ID_SLOTID 0x04 /* Slot Identification */ -#define PCI_CAP_ID_MSI 0x05 /* Message Signalled Interrupts */ -#define PCI_CAP_ID_CHSWP 0x06 /* CompactPCI HotSwap */ -#define PCI_CAP_ID_PCIX 0x07 /* PCI-X */ -#define PCI_CAP_ID_HT 0x08 /* HyperTransport */ -#define PCI_CAP_ID_VNDR 0x09 /* Vendor specific */ -#define PCI_CAP_ID_DBG 0x0A /* Debug port */ -#define PCI_CAP_ID_CCRC 0x0B /* CompactPCI Central Resource Control */ -#define PCI_CAP_ID_SHPC 0x0C /* PCI Standard Hot-Plug Controller */ -#define PCI_CAP_ID_SSVID 0x0D /* Bridge subsystem vendor/device ID */ -#define PCI_CAP_ID_AGP3 0x0E /* AGP Target PCI-PCI bridge */ -#define PCI_CAP_ID_EXP 0x10 /* PCI Express */ -#define PCI_CAP_ID_MSIX 0x11 /* MSI-X */ -#define PCI_CAP_LIST_NEXT 1 /* Next capability in the list */ -#define PCI_CAP_FLAGS 2 /* Capability defined flags (16 bits) */ -#define PCI_CAP_SIZEOF 4 - -/* Power Management Registers */ - -#define PCI_PM_PMC 2 /* PM Capabilities Register */ -#define PCI_PM_CAP_VER_MASK 0x0007 /* Version */ -#define PCI_PM_CAP_PME_CLOCK 0x0008 /* PME clock required */ -#define PCI_PM_CAP_RESERVED 0x0010 /* Reserved field */ -#define PCI_PM_CAP_DSI 0x0020 /* Device specific initialization */ -#define PCI_PM_CAP_AUX_POWER 0x01C0 /* Auxilliary power support mask */ -#define PCI_PM_CAP_D1 0x0200 /* D1 power state support */ -#define PCI_PM_CAP_D2 0x0400 /* D2 power state support */ -#define PCI_PM_CAP_PME 0x0800 /* PME pin supported */ -#define PCI_PM_CAP_PME_MASK 0xF800 /* PME Mask of all supported states */ -#define PCI_PM_CAP_PME_D0 0x0800 /* PME# from D0 */ -#define PCI_PM_CAP_PME_D1 0x1000 /* PME# from D1 */ -#define PCI_PM_CAP_PME_D2 0x2000 /* PME# from D2 */ -#define PCI_PM_CAP_PME_D3 0x4000 /* PME# from D3 (hot) */ -#define PCI_PM_CAP_PME_D3cold 0x8000 /* PME# from D3 (cold) */ -#define PCI_PM_CAP_PME_SHIFT 11 /* Start of the PME Mask in PMC */ -#define PCI_PM_CTRL 4 /* PM control and status register */ -#define PCI_PM_CTRL_STATE_MASK 0x0003 /* Current power state (D0 to D3) */ -#define PCI_PM_CTRL_NO_SOFT_RESET 0x0004 /* No reset for D3hot->D0 */ -#define PCI_PM_CTRL_PME_ENABLE 0x0100 /* PME pin enable */ -#define PCI_PM_CTRL_DATA_SEL_MASK 0x1e00 /* Data select (??) */ -#define PCI_PM_CTRL_DATA_SCALE_MASK 0x6000 /* Data scale (??) */ -#define PCI_PM_CTRL_PME_STATUS 0x8000 /* PME pin status */ -#define PCI_PM_PPB_EXTENSIONS 6 /* PPB support extensions (??) */ -#define PCI_PM_PPB_B2_B3 0x40 /* Stop clock when in D3hot (??) */ -#define PCI_PM_BPCC_ENABLE 0x80 /* Bus power/clock control enable (??) */ -#define PCI_PM_DATA_REGISTER 7 /* (??) */ -#define PCI_PM_SIZEOF 8 - -/* AGP registers */ - -#define PCI_AGP_VERSION 2 /* BCD version number */ -#define PCI_AGP_RFU 3 /* Rest of capability flags */ -#define PCI_AGP_STATUS 4 /* Status register */ -#define PCI_AGP_STATUS_RQ_MASK 0xff000000 /* Maximum number of requests - 1 */ -#define PCI_AGP_STATUS_SBA 0x0200 /* Sideband addressing supported */ -#define PCI_AGP_STATUS_64BIT 0x0020 /* 64-bit addressing supported */ -#define PCI_AGP_STATUS_FW 0x0010 /* FW transfers supported */ -#define PCI_AGP_STATUS_RATE4 0x0004 /* 4x transfer rate supported */ -#define PCI_AGP_STATUS_RATE2 0x0002 /* 2x transfer rate supported */ -#define PCI_AGP_STATUS_RATE1 0x0001 /* 1x transfer rate supported */ -#define PCI_AGP_COMMAND 8 /* Control register */ -#define PCI_AGP_COMMAND_RQ_MASK 0xff000000 /* Master: Maximum number of requests */ -#define PCI_AGP_COMMAND_SBA 0x0200 /* Sideband addressing enabled */ -#define PCI_AGP_COMMAND_AGP 0x0100 /* Allow processing of AGP transactions */ -#define PCI_AGP_COMMAND_64BIT 0x0020 /* Allow processing of 64-bit addresses */ -#define PCI_AGP_COMMAND_FW 0x0010 /* Force FW transfers */ -#define PCI_AGP_COMMAND_RATE4 0x0004 /* Use 4x rate */ -#define PCI_AGP_COMMAND_RATE2 0x0002 /* Use 2x rate */ -#define PCI_AGP_COMMAND_RATE1 0x0001 /* Use 1x rate */ -#define PCI_AGP_SIZEOF 12 - -/* Vital Product Data */ - -#define PCI_VPD_ADDR 2 /* Address to access (15 bits!) */ -#define PCI_VPD_ADDR_MASK 0x7fff /* Address mask */ -#define PCI_VPD_ADDR_F 0x8000 /* Write 0, 1 indicates completion */ -#define PCI_VPD_DATA 4 /* 32-bits of data returned here */ - -/* Slot Identification */ - -#define PCI_SID_ESR 2 /* Expansion Slot Register */ -#define PCI_SID_ESR_NSLOTS 0x1f /* Number of expansion slots available */ -#define PCI_SID_ESR_FIC 0x20 /* First In Chassis Flag */ -#define PCI_SID_CHASSIS_NR 3 /* Chassis Number */ - -/* Message Signalled Interrupts registers */ - -#define PCI_MSI_FLAGS 2 /* Various flags */ -#define PCI_MSI_FLAGS_64BIT 0x80 /* 64-bit addresses allowed */ -#define PCI_MSI_FLAGS_QSIZE 0x70 /* Message queue size configured */ -#define PCI_MSI_FLAGS_QMASK 0x0e /* Maximum queue size available */ -#define PCI_MSI_FLAGS_ENABLE 0x01 /* MSI feature enabled */ -#define PCI_MSI_FLAGS_MASKBIT 0x100 /* 64-bit mask bits allowed */ -#define PCI_MSI_RFU 3 /* Rest of capability flags */ -#define PCI_MSI_ADDRESS_LO 4 /* Lower 32 bits */ -#define PCI_MSI_ADDRESS_HI 8 /* Upper 32 bits (if PCI_MSI_FLAGS_64BIT set) */ -#define PCI_MSI_DATA_32 8 /* 16 bits of data for 32-bit devices */ -#define PCI_MSI_DATA_64 12 /* 16 bits of data for 64-bit devices */ -#define PCI_MSI_MASK_BIT 16 /* Mask bits register */ - -/* MSI-X registers (these are at offset PCI_MSIX_FLAGS) */ -#define PCI_MSIX_FLAGS 2 -#define PCI_MSIX_FLAGS_QSIZE 0x7FF -#define PCI_MSIX_FLAGS_ENABLE (1 << 15) -#define PCI_MSIX_FLAGS_MASKALL (1 << 14) -#define PCI_MSIX_FLAGS_BIRMASK (7 << 0) -#define PCI_MSIX_FLAGS_BITMASK (1 << 0) - -/* CompactPCI Hotswap Register */ - -#define PCI_CHSWP_CSR 2 /* Control and Status Register */ -#define PCI_CHSWP_DHA 0x01 /* Device Hiding Arm */ -#define PCI_CHSWP_EIM 0x02 /* ENUM# Signal Mask */ -#define PCI_CHSWP_PIE 0x04 /* Pending Insert or Extract */ -#define PCI_CHSWP_LOO 0x08 /* LED On / Off */ -#define PCI_CHSWP_PI 0x30 /* Programming Interface */ -#define PCI_CHSWP_EXT 0x40 /* ENUM# status - extraction */ -#define PCI_CHSWP_INS 0x80 /* ENUM# status - insertion */ - -/* PCI-X registers */ - -#define PCI_X_CMD 2 /* Modes & Features */ -#define PCI_X_CMD_DPERR_E 0x0001 /* Data Parity Error Recovery Enable */ -#define PCI_X_CMD_ERO 0x0002 /* Enable Relaxed Ordering */ -#define PCI_X_CMD_READ_512 0x0000 /* 512 byte maximum read byte count */ -#define PCI_X_CMD_READ_1K 0x0004 /* 1Kbyte maximum read byte count */ -#define PCI_X_CMD_READ_2K 0x0008 /* 2Kbyte maximum read byte count */ -#define PCI_X_CMD_READ_4K 0x000c /* 4Kbyte maximum read byte count */ -#define PCI_X_CMD_MAX_READ 0x000c /* Max Memory Read Byte Count */ - /* Max # of outstanding split transactions */ -#define PCI_X_CMD_SPLIT_1 0x0000 /* Max 1 */ -#define PCI_X_CMD_SPLIT_2 0x0010 /* Max 2 */ -#define PCI_X_CMD_SPLIT_3 0x0020 /* Max 3 */ -#define PCI_X_CMD_SPLIT_4 0x0030 /* Max 4 */ -#define PCI_X_CMD_SPLIT_8 0x0040 /* Max 8 */ -#define PCI_X_CMD_SPLIT_12 0x0050 /* Max 12 */ -#define PCI_X_CMD_SPLIT_16 0x0060 /* Max 16 */ -#define PCI_X_CMD_SPLIT_32 0x0070 /* Max 32 */ -#define PCI_X_CMD_MAX_SPLIT 0x0070 /* Max Outstanding Split Transactions */ -#define PCI_X_CMD_VERSION(x) (((x) >> 12) & 3) /* Version */ -#define PCI_X_STATUS 4 /* PCI-X capabilities */ -#define PCI_X_STATUS_DEVFN 0x000000ff /* A copy of devfn */ -#define PCI_X_STATUS_BUS 0x0000ff00 /* A copy of bus nr */ -#define PCI_X_STATUS_64BIT 0x00010000 /* 64-bit device */ -#define PCI_X_STATUS_133MHZ 0x00020000 /* 133 MHz capable */ -#define PCI_X_STATUS_SPL_DISC 0x00040000 /* Split Completion Discarded */ -#define PCI_X_STATUS_UNX_SPL 0x00080000 /* Unexpected Split Completion */ -#define PCI_X_STATUS_COMPLEX 0x00100000 /* Device Complexity */ -#define PCI_X_STATUS_MAX_READ 0x00600000 /* Designed Max Memory Read Count */ -#define PCI_X_STATUS_MAX_SPLIT 0x03800000 /* Designed Max Outstanding Split Transactions */ -#define PCI_X_STATUS_MAX_CUM 0x1c000000 /* Designed Max Cumulative Read Size */ -#define PCI_X_STATUS_SPL_ERR 0x20000000 /* Rcvd Split Completion Error Msg */ -#define PCI_X_STATUS_266MHZ 0x40000000 /* 266 MHz capable */ -#define PCI_X_STATUS_533MHZ 0x80000000 /* 533 MHz capable */ - -/* PCI Express capability registers */ - -#define PCI_EXP_FLAGS 2 /* Capabilities register */ -#define PCI_EXP_FLAGS_VERS 0x000f /* Capability version */ -#define PCI_EXP_FLAGS_TYPE 0x00f0 /* Device/Port type */ -#define PCI_EXP_TYPE_ENDPOINT 0x0 /* Express Endpoint */ -#define PCI_EXP_TYPE_LEG_END 0x1 /* Legacy Endpoint */ -#define PCI_EXP_TYPE_ROOT_PORT 0x4 /* Root Port */ -#define PCI_EXP_TYPE_UPSTREAM 0x5 /* Upstream Port */ -#define PCI_EXP_TYPE_DOWNSTREAM 0x6 /* Downstream Port */ -#define PCI_EXP_TYPE_PCI_BRIDGE 0x7 /* PCI/PCI-X Bridge */ -#define PCI_EXP_FLAGS_SLOT 0x0100 /* Slot implemented */ -#define PCI_EXP_FLAGS_IRQ 0x3e00 /* Interrupt message number */ -#define PCI_EXP_DEVCAP 4 /* Device capabilities */ -#define PCI_EXP_DEVCAP_PAYLOAD 0x07 /* Max_Payload_Size */ -#define PCI_EXP_DEVCAP_PHANTOM 0x18 /* Phantom functions */ -#define PCI_EXP_DEVCAP_EXT_TAG 0x20 /* Extended tags */ -#define PCI_EXP_DEVCAP_L0S 0x1c0 /* L0s Acceptable Latency */ -#define PCI_EXP_DEVCAP_L1 0xe00 /* L1 Acceptable Latency */ -#define PCI_EXP_DEVCAP_ATN_BUT 0x1000 /* Attention Button Present */ -#define PCI_EXP_DEVCAP_ATN_IND 0x2000 /* Attention Indicator Present */ -#define PCI_EXP_DEVCAP_PWR_IND 0x4000 /* Power Indicator Present */ -#define PCI_EXP_DEVCAP_RBER 0x8000 /* Role-Based Error Reporting */ -#define PCI_EXP_DEVCAP_PWR_VAL 0x3fc0000 /* Slot Power Limit Value */ -#define PCI_EXP_DEVCAP_PWR_SCL 0xc000000 /* Slot Power Limit Scale */ -#define PCI_EXP_DEVCAP_FLR 0x10000000 /* Function Level Reset */ -#define PCI_EXP_DEVCTL 8 /* Device Control */ -#define PCI_EXP_DEVCTL_CERE 0x0001 /* Correctable Error Reporting En. */ -#define PCI_EXP_DEVCTL_NFERE 0x0002 /* Non-Fatal Error Reporting Enable */ -#define PCI_EXP_DEVCTL_FERE 0x0004 /* Fatal Error Reporting Enable */ -#define PCI_EXP_DEVCTL_URRE 0x0008 /* Unsupported Request Reporting En. */ -#define PCI_EXP_DEVCTL_RELAX_EN 0x0010 /* Enable relaxed ordering */ -#define PCI_EXP_DEVCTL_PAYLOAD 0x00e0 /* Max_Payload_Size */ -#define PCI_EXP_DEVCTL_EXT_TAG 0x0100 /* Extended Tag Field Enable */ -#define PCI_EXP_DEVCTL_PHANTOM 0x0200 /* Phantom Functions Enable */ -#define PCI_EXP_DEVCTL_AUX_PME 0x0400 /* Auxiliary Power PM Enable */ -#define PCI_EXP_DEVCTL_NOSNOOP_EN 0x0800 /* Enable No Snoop */ -#define PCI_EXP_DEVCTL_READRQ 0x7000 /* Max_Read_Request_Size */ -#define PCI_EXP_DEVCTL_BCR_FLR 0x8000 /* Bridge Configuration Retry / FLR */ -#define PCI_EXP_DEVSTA 10 /* Device Status */ -#define PCI_EXP_DEVSTA_CED 0x01 /* Correctable Error Detected */ -#define PCI_EXP_DEVSTA_NFED 0x02 /* Non-Fatal Error Detected */ -#define PCI_EXP_DEVSTA_FED 0x04 /* Fatal Error Detected */ -#define PCI_EXP_DEVSTA_URD 0x08 /* Unsupported Request Detected */ -#define PCI_EXP_DEVSTA_AUXPD 0x10 /* AUX Power Detected */ -#define PCI_EXP_DEVSTA_TRPND 0x20 /* Transactions Pending */ -#define PCI_EXP_LNKCAP 12 /* Link Capabilities */ -#define PCI_EXP_LNKCAP_ASPMS 0xc00 /* ASPM Support */ -#define PCI_EXP_LNKCAP_L0SEL 0x7000 /* L0s Exit Latency */ -#define PCI_EXP_LNKCAP_L1EL 0x38000 /* L1 Exit Latency */ -#define PCI_EXP_LNKCAP_CLKPM 0x40000 /* L1 Clock Power Management */ -#define PCI_EXP_LNKCTL 16 /* Link Control */ -#define PCI_EXP_LNKCTL_RL 0x20 /* Retrain Link */ -#define PCI_EXP_LNKCTL_CCC 0x40 /* Common Clock COnfiguration */ -#define PCI_EXP_LNKCTL_CLKREQ_EN 0x100 /* Enable clkreq */ -#define PCI_EXP_LNKSTA 18 /* Link Status */ -#define PCI_EXP_LNKSTA_LT 0x800 /* Link Training */ -#define PCI_EXP_LNKSTA_SLC 0x1000 /* Slot Clock Configuration */ -#define PCI_EXP_SLTCAP 20 /* Slot Capabilities */ -#define PCI_EXP_SLTCTL 24 /* Slot Control */ -#define PCI_EXP_SLTSTA 26 /* Slot Status */ -#define PCI_EXP_RTCTL 28 /* Root Control */ -#define PCI_EXP_RTCTL_SECEE 0x01 /* System Error on Correctable Error */ -#define PCI_EXP_RTCTL_SENFEE 0x02 /* System Error on Non-Fatal Error */ -#define PCI_EXP_RTCTL_SEFEE 0x04 /* System Error on Fatal Error */ -#define PCI_EXP_RTCTL_PMEIE 0x08 /* PME Interrupt Enable */ -#define PCI_EXP_RTCTL_CRSSVE 0x10 /* CRS Software Visibility Enable */ -#define PCI_EXP_RTCAP 30 /* Root Capabilities */ -#define PCI_EXP_RTSTA 32 /* Root Status */ -#define PCI_EXP_DEVCAP2 36 /* Device Capabilities 2 */ -#define PCI_EXP_DEVCAP2_ARI 0x20 /* Alternative Routing-ID */ -#define PCI_EXP_DEVCTL2 40 /* Device Control 2 */ -#define PCI_EXP_DEVCTL2_ARI 0x20 /* Alternative Routing-ID */ - -/* Extended Capabilities (PCI-X 2.0 and Express) */ -#define PCI_EXT_CAP_ID(header) (header & 0x0000ffff) -#define PCI_EXT_CAP_VER(header) ((header >> 16) & 0xf) -#define PCI_EXT_CAP_NEXT(header) ((header >> 20) & 0xffc) - -#define PCI_EXT_CAP_ID_ERR 1 -#define PCI_EXT_CAP_ID_VC 2 -#define PCI_EXT_CAP_ID_DSN 3 -#define PCI_EXT_CAP_ID_PWR 4 -#define PCI_EXT_CAP_ID_ARI 14 - -/* Advanced Error Reporting */ -#define PCI_ERR_UNCOR_STATUS 4 /* Uncorrectable Error Status */ -#define PCI_ERR_UNC_TRAIN 0x00000001 /* Training */ -#define PCI_ERR_UNC_DLP 0x00000010 /* Data Link Protocol */ -#define PCI_ERR_UNC_POISON_TLP 0x00001000 /* Poisoned TLP */ -#define PCI_ERR_UNC_FCP 0x00002000 /* Flow Control Protocol */ -#define PCI_ERR_UNC_COMP_TIME 0x00004000 /* Completion Timeout */ -#define PCI_ERR_UNC_COMP_ABORT 0x00008000 /* Completer Abort */ -#define PCI_ERR_UNC_UNX_COMP 0x00010000 /* Unexpected Completion */ -#define PCI_ERR_UNC_RX_OVER 0x00020000 /* Receiver Overflow */ -#define PCI_ERR_UNC_MALF_TLP 0x00040000 /* Malformed TLP */ -#define PCI_ERR_UNC_ECRC 0x00080000 /* ECRC Error Status */ -#define PCI_ERR_UNC_UNSUP 0x00100000 /* Unsupported Request */ -#define PCI_ERR_UNCOR_MASK 8 /* Uncorrectable Error Mask */ - /* Same bits as above */ -#define PCI_ERR_UNCOR_SEVER 12 /* Uncorrectable Error Severity */ - /* Same bits as above */ -#define PCI_ERR_COR_STATUS 16 /* Correctable Error Status */ -#define PCI_ERR_COR_RCVR 0x00000001 /* Receiver Error Status */ -#define PCI_ERR_COR_BAD_TLP 0x00000040 /* Bad TLP Status */ -#define PCI_ERR_COR_BAD_DLLP 0x00000080 /* Bad DLLP Status */ -#define PCI_ERR_COR_REP_ROLL 0x00000100 /* REPLAY_NUM Rollover */ -#define PCI_ERR_COR_REP_TIMER 0x00001000 /* Replay Timer Timeout */ -#define PCI_ERR_COR_MASK 20 /* Correctable Error Mask */ - /* Same bits as above */ -#define PCI_ERR_CAP 24 /* Advanced Error Capabilities */ -#define PCI_ERR_CAP_FEP(x) ((x) & 31) /* First Error Pointer */ -#define PCI_ERR_CAP_ECRC_GENC 0x00000020 /* ECRC Generation Capable */ -#define PCI_ERR_CAP_ECRC_GENE 0x00000040 /* ECRC Generation Enable */ -#define PCI_ERR_CAP_ECRC_CHKC 0x00000080 /* ECRC Check Capable */ -#define PCI_ERR_CAP_ECRC_CHKE 0x00000100 /* ECRC Check Enable */ -#define PCI_ERR_HEADER_LOG 28 /* Header Log Register (16 bytes) */ -#define PCI_ERR_ROOT_COMMAND 44 /* Root Error Command */ -/* Correctable Err Reporting Enable */ -#define PCI_ERR_ROOT_CMD_COR_EN 0x00000001 -/* Non-fatal Err Reporting Enable */ -#define PCI_ERR_ROOT_CMD_NONFATAL_EN 0x00000002 -/* Fatal Err Reporting Enable */ -#define PCI_ERR_ROOT_CMD_FATAL_EN 0x00000004 -#define PCI_ERR_ROOT_STATUS 48 -#define PCI_ERR_ROOT_COR_RCV 0x00000001 /* ERR_COR Received */ -/* Multi ERR_COR Received */ -#define PCI_ERR_ROOT_MULTI_COR_RCV 0x00000002 -/* ERR_FATAL/NONFATAL Recevied */ -#define PCI_ERR_ROOT_UNCOR_RCV 0x00000004 -/* Multi ERR_FATAL/NONFATAL Recevied */ -#define PCI_ERR_ROOT_MULTI_UNCOR_RCV 0x00000008 -#define PCI_ERR_ROOT_FIRST_FATAL 0x00000010 /* First Fatal */ -#define PCI_ERR_ROOT_NONFATAL_RCV 0x00000020 /* Non-Fatal Received */ -#define PCI_ERR_ROOT_FATAL_RCV 0x00000040 /* Fatal Received */ -#define PCI_ERR_ROOT_COR_SRC 52 -#define PCI_ERR_ROOT_SRC 54 - -/* Virtual Channel */ -#define PCI_VC_PORT_REG1 4 -#define PCI_VC_PORT_REG2 8 -#define PCI_VC_PORT_CTRL 12 -#define PCI_VC_PORT_STATUS 14 -#define PCI_VC_RES_CAP 16 -#define PCI_VC_RES_CTRL 20 -#define PCI_VC_RES_STATUS 26 - -/* Power Budgeting */ -#define PCI_PWR_DSR 4 /* Data Select Register */ -#define PCI_PWR_DATA 8 /* Data Register */ -#define PCI_PWR_DATA_BASE(x) ((x) & 0xff) /* Base Power */ -#define PCI_PWR_DATA_SCALE(x) (((x) >> 8) & 3) /* Data Scale */ -#define PCI_PWR_DATA_PM_SUB(x) (((x) >> 10) & 7) /* PM Sub State */ -#define PCI_PWR_DATA_PM_STATE(x) (((x) >> 13) & 3) /* PM State */ -#define PCI_PWR_DATA_TYPE(x) (((x) >> 15) & 7) /* Type */ -#define PCI_PWR_DATA_RAIL(x) (((x) >> 18) & 7) /* Power Rail */ -#define PCI_PWR_CAP 12 /* Capability */ -#define PCI_PWR_CAP_BUDGET(x) ((x) & 1) /* Included in system budget */ - -/* - * Hypertransport sub capability types - * - * Unfortunately there are both 3 bit and 5 bit capability types defined - * in the HT spec, catering for that is a little messy. You probably don't - * want to use these directly, just use pci_find_ht_capability() and it - * will do the right thing for you. - */ -#define HT_3BIT_CAP_MASK 0xE0 -#define HT_CAPTYPE_SLAVE 0x00 /* Slave/Primary link configuration */ -#define HT_CAPTYPE_HOST 0x20 /* Host/Secondary link configuration */ - -#define HT_5BIT_CAP_MASK 0xF8 -#define HT_CAPTYPE_IRQ 0x80 /* IRQ Configuration */ -#define HT_CAPTYPE_REMAPPING_40 0xA0 /* 40 bit address remapping */ -#define HT_CAPTYPE_REMAPPING_64 0xA2 /* 64 bit address remapping */ -#define HT_CAPTYPE_UNITID_CLUMP 0x90 /* Unit ID clumping */ -#define HT_CAPTYPE_EXTCONF 0x98 /* Extended Configuration Space Access */ -#define HT_CAPTYPE_MSI_MAPPING 0xA8 /* MSI Mapping Capability */ -#define HT_MSI_FLAGS 0x02 /* Offset to flags */ -#define HT_MSI_FLAGS_ENABLE 0x1 /* Mapping enable */ -#define HT_MSI_FLAGS_FIXED 0x2 /* Fixed mapping only */ -#define HT_MSI_FIXED_ADDR 0x00000000FEE00000ULL /* Fixed addr */ -#define HT_MSI_ADDR_LO 0x04 /* Offset to low addr bits */ -#define HT_MSI_ADDR_LO_MASK 0xFFF00000 /* Low address bit mask */ -#define HT_MSI_ADDR_HI 0x08 /* Offset to high addr bits */ -#define HT_CAPTYPE_DIRECT_ROUTE 0xB0 /* Direct routing configuration */ -#define HT_CAPTYPE_VCSET 0xB8 /* Virtual Channel configuration */ -#define HT_CAPTYPE_ERROR_RETRY 0xC0 /* Retry on error configuration */ -#define HT_CAPTYPE_GEN3 0xD0 /* Generation 3 hypertransport configuration */ -#define HT_CAPTYPE_PM 0xE0 /* Hypertransport powermanagement configuration */ - -/* Alternative Routing-ID Interpretation */ -#define PCI_ARI_CAP 0x04 /* ARI Capability Register */ -#define PCI_ARI_CAP_MFVC 0x0001 /* MFVC Function Groups Capability */ -#define PCI_ARI_CAP_ACS 0x0002 /* ACS Function Groups Capability */ -#define PCI_ARI_CAP_NFN(x) (((x) >> 8) & 0xff) /* Next Function Number */ -#define PCI_ARI_CTRL 0x06 /* ARI Control Register */ -#define PCI_ARI_CTRL_MFVC 0x0001 /* MFVC Function Groups Enable */ -#define PCI_ARI_CTRL_ACS 0x0002 /* ACS Function Groups Enable */ -#define PCI_ARI_CTRL_FG(x) (((x) >> 4) & 7) /* Function Group */ - -#endif /* LINUX_PCI_REGS_H */ diff --git a/payloads/external/SeaBIOS/src/hw/pcidevice.c b/payloads/external/SeaBIOS/src/hw/pcidevice.c deleted file mode 100644 index 8853cf72..00000000 --- a/payloads/external/SeaBIOS/src/hw/pcidevice.c +++ /dev/null @@ -1,192 +0,0 @@ -// Code to maintain and access the pci_device cache -// -// Copyright (C) 2008-2016 Kevin O'Connor <kevin@koconnor.net> -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "malloc.h" // malloc_tmp -#include "output.h" // dprintf -#include "pci.h" // pci_config_writel -#include "pcidevice.h" // pci_probe_devices -#include "pci_regs.h" // PCI_VENDOR_ID -#include "romfile.h" // romfile_loadint -#include "stacks.h" // wait_preempt -#include "string.h" // memset - -struct hlist_head PCIDevices VARVERIFY32INIT; -int MaxPCIBus VARFSEG; - -// Find all PCI devices and populate PCIDevices linked list. -void -pci_probe_devices(void) -{ - dprintf(3, "PCI probe\n"); - struct pci_device *busdevs[256]; - memset(busdevs, 0, sizeof(busdevs)); - struct hlist_node **pprev = &PCIDevices.first; - int extraroots = romfile_loadint("etc/extra-pci-roots", 0); - int bus = -1, lastbus = 0, rootbuses = 0, count=0; - while (bus < 0xff && (bus < MaxPCIBus || rootbuses < extraroots)) { - bus++; - int bdf; - foreachbdf(bdf, bus) { - // Create new pci_device struct and add to list. - struct pci_device *dev = malloc_tmp(sizeof(*dev)); - if (!dev) { - warn_noalloc(); - return; - } - memset(dev, 0, sizeof(*dev)); - hlist_add(&dev->node, pprev); - pprev = &dev->node.next; - count++; - - // Find parent device. - int rootbus; - struct pci_device *parent = busdevs[bus]; - if (!parent) { - if (bus != lastbus) - rootbuses++; - lastbus = bus; - rootbus = rootbuses; - if (bus > MaxPCIBus) - MaxPCIBus = bus; - } else { - rootbus = parent->rootbus; - } - - // Populate pci_device info. - dev->bdf = bdf; - dev->parent = parent; - dev->rootbus = rootbus; - u32 vendev = pci_config_readl(bdf, PCI_VENDOR_ID); - dev->vendor = vendev & 0xffff; - dev->device = vendev >> 16; - u32 classrev = pci_config_readl(bdf, PCI_CLASS_REVISION); - dev->class = classrev >> 16; - dev->prog_if = classrev >> 8; - dev->revision = classrev & 0xff; - dev->header_type = pci_config_readb(bdf, PCI_HEADER_TYPE); - u8 v = dev->header_type & 0x7f; - if (v == PCI_HEADER_TYPE_BRIDGE || v == PCI_HEADER_TYPE_CARDBUS) { - u8 secbus = pci_config_readb(bdf, PCI_SECONDARY_BUS); - dev->secondary_bus = secbus; - if (secbus > bus && !busdevs[secbus]) - busdevs[secbus] = dev; - if (secbus > MaxPCIBus) - MaxPCIBus = secbus; - } - dprintf(4, "PCI device %pP (vd=%04x:%04x c=%04x)\n" - , dev, dev->vendor, dev->device, dev->class); - } - } - dprintf(1, "Found %d PCI devices (max PCI bus is %02x)\n", count, MaxPCIBus); -} - -// Search for a device with the specified vendor and device ids. -struct pci_device * -pci_find_device(u16 vendid, u16 devid) -{ - struct pci_device *pci; - foreachpci(pci) { - if (pci->vendor == vendid && pci->device == devid) - return pci; - } - return NULL; -} - -// Search for a device with the specified class id. -struct pci_device * -pci_find_class(u16 classid) -{ - struct pci_device *pci; - foreachpci(pci) { - if (pci->class == classid) - return pci; - } - return NULL; -} - -int pci_init_device(const struct pci_device_id *ids - , struct pci_device *pci, void *arg) -{ - while (ids->vendid || ids->class_mask) { - if ((ids->vendid == PCI_ANY_ID || ids->vendid == pci->vendor) && - (ids->devid == PCI_ANY_ID || ids->devid == pci->device) && - !((ids->class ^ pci->class) & ids->class_mask)) { - if (ids->func) - ids->func(pci, arg); - return 0; - } - ids++; - } - return -1; -} - -struct pci_device * -pci_find_init_device(const struct pci_device_id *ids, void *arg) -{ - struct pci_device *pci; - foreachpci(pci) { - if (pci_init_device(ids, pci, arg) == 0) - return pci; - } - return NULL; -} - -// Enable PCI bus-mastering (ie, DMA) support on a pci device -void -pci_enable_busmaster(struct pci_device *pci) -{ - wait_preempt(); - pci_config_maskw(pci->bdf, PCI_COMMAND, 0, PCI_COMMAND_MASTER); - pci->have_driver = 1; -} - -// Verify an IO bar and return it to the caller -u16 -pci_enable_iobar(struct pci_device *pci, u32 addr) -{ - wait_preempt(); - u32 bar = pci_config_readl(pci->bdf, addr); - if (!(bar & PCI_BASE_ADDRESS_SPACE_IO)) { - warn_internalerror(); - return 0; - } - bar &= PCI_BASE_ADDRESS_IO_MASK; - if (bar == 0 || bar > 0xffff) { - warn_internalerror(); - return 0; - } - pci_config_maskw(pci->bdf, PCI_COMMAND, 0, PCI_COMMAND_IO); - pci->have_driver = 1; - return bar; -} - -// Verify a memory bar and return it to the caller -void * -pci_enable_membar(struct pci_device *pci, u32 addr) -{ - wait_preempt(); - u32 bar = pci_config_readl(pci->bdf, addr); - if (bar & PCI_BASE_ADDRESS_SPACE_IO) { - warn_internalerror(); - return NULL; - } - if (bar & PCI_BASE_ADDRESS_MEM_TYPE_64) { - u32 high = pci_config_readl(pci->bdf, addr+4); - if (high) { - dprintf(1, "Can not map memory bar over 4Gig\n"); - return NULL; - } - } - bar &= PCI_BASE_ADDRESS_MEM_MASK; - if (bar + 4*1024*1024 < 20*1024*1024) { - // Bar doesn't look valid (it is in last 4M or first 16M) - warn_internalerror(); - return NULL; - } - pci_config_maskw(pci->bdf, PCI_COMMAND, 0, PCI_COMMAND_MEMORY); - pci->have_driver = 1; - return (void*)bar; -} diff --git a/payloads/external/SeaBIOS/src/hw/pcidevice.h b/payloads/external/SeaBIOS/src/hw/pcidevice.h deleted file mode 100644 index 225d5451..00000000 --- a/payloads/external/SeaBIOS/src/hw/pcidevice.h +++ /dev/null @@ -1,76 +0,0 @@ -#ifndef __PCIDEVICE_H -#define __PCIDEVICE_H - -#include "types.h" // u32 -#include "list.h" // hlist_node - -struct pci_device { - u16 bdf; - u8 rootbus; - struct hlist_node node; - struct pci_device *parent; - - // Configuration space device information - u16 vendor, device; - u16 class; - u8 prog_if, revision; - u8 header_type; - u8 secondary_bus; - - // Local information on device. - int have_driver; -}; -extern struct hlist_head PCIDevices; -extern int MaxPCIBus; - -static inline u32 pci_classprog(struct pci_device *pci) { - return (pci->class << 8) | pci->prog_if; -} - -#define foreachpci(PCI) \ - hlist_for_each_entry(PCI, &PCIDevices, node) - -#define PCI_ANY_ID (~0) -struct pci_device_id { - u32 vendid; - u32 devid; - u32 class; - u32 class_mask; - void (*func)(struct pci_device *pci, void *arg); -}; - -#define PCI_DEVICE(vendor_id, device_id, init_func) \ - { \ - .vendid = (vendor_id), \ - .devid = (device_id), \ - .class = PCI_ANY_ID, \ - .class_mask = 0, \ - .func = (init_func) \ - } - -#define PCI_DEVICE_CLASS(vendor_id, device_id, class_code, init_func) \ - { \ - .vendid = (vendor_id), \ - .devid = (device_id), \ - .class = (class_code), \ - .class_mask = ~0, \ - .func = (init_func) \ - } - -#define PCI_DEVICE_END \ - { \ - .vendid = 0, \ - } - -void pci_probe_devices(void); -struct pci_device *pci_find_device(u16 vendid, u16 devid); -struct pci_device *pci_find_class(u16 classid); -int pci_init_device(const struct pci_device_id *ids - , struct pci_device *pci, void *arg); -struct pci_device *pci_find_init_device(const struct pci_device_id *ids - , void *arg); -void pci_enable_busmaster(struct pci_device *pci); -u16 pci_enable_iobar(struct pci_device *pci, u32 addr); -void *pci_enable_membar(struct pci_device *pci, u32 addr); - -#endif // pcidevice.h diff --git a/payloads/external/SeaBIOS/src/hw/pic.c b/payloads/external/SeaBIOS/src/hw/pic.c deleted file mode 100644 index a13564ae..00000000 --- a/payloads/external/SeaBIOS/src/hw/pic.c +++ /dev/null @@ -1,115 +0,0 @@ -// Helpers for working with i8259 interrupt controller. -// -// Copyright (C) 2008 Kevin O'Connor <kevin@koconnor.net> -// Copyright (C) 2002 MandrakeSoft S.A. -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "biosvar.h" // SET_IVT -#include "config.h" // CONFIG_* -#include "output.h" // dprintf -#include "pic.h" // pic_* - -u16 -pic_irqmask_read(void) -{ - if (!CONFIG_HARDWARE_IRQ) - return 0; - return inb(PORT_PIC1_DATA) | (inb(PORT_PIC2_DATA) << 8); -} - -void -pic_irqmask_write(u16 mask) -{ - if (!CONFIG_HARDWARE_IRQ) - return; - outb(mask, PORT_PIC1_DATA); - outb(mask >> 8, PORT_PIC2_DATA); -} - -void -pic_irqmask_mask(u16 off, u16 on) -{ - if (!CONFIG_HARDWARE_IRQ) - return; - u8 pic1off = off, pic1on = on, pic2off = off>>8, pic2on = on>>8; - outb((inb(PORT_PIC1_DATA) & ~pic1off) | pic1on, PORT_PIC1_DATA); - outb((inb(PORT_PIC2_DATA) & ~pic2off) | pic2on, PORT_PIC2_DATA); -} - -void -pic_reset(u8 irq0, u8 irq8) -{ - if (!CONFIG_HARDWARE_IRQ) - return; - // Send ICW1 (select OCW1 + will send ICW4) - outb(0x11, PORT_PIC1_CMD); - outb(0x11, PORT_PIC2_CMD); - // Send ICW2 (base irqs: 0x08-0x0f for irq0-7, 0x70-0x77 for irq8-15) - outb(irq0, PORT_PIC1_DATA); - outb(irq8, PORT_PIC2_DATA); - // Send ICW3 (cascaded pic ids) - outb(0x04, PORT_PIC1_DATA); - outb(0x02, PORT_PIC2_DATA); - // Send ICW4 (enable 8086 mode) - outb(0x01, PORT_PIC1_DATA); - outb(0x01, PORT_PIC2_DATA); - // Mask all irqs (except cascaded PIC2 irq) - pic_irqmask_write(PIC_IRQMASK_DEFAULT); -} - -void -pic_setup(void) -{ - dprintf(3, "init pic\n"); - pic_reset(BIOS_HWIRQ0_VECTOR, BIOS_HWIRQ8_VECTOR); -} - -void -enable_hwirq(int hwirq, struct segoff_s func) -{ - if (!CONFIG_HARDWARE_IRQ) - return; - pic_irqmask_mask(1 << hwirq, 0); - int vector; - if (hwirq < 8) - vector = BIOS_HWIRQ0_VECTOR + hwirq; - else - vector = BIOS_HWIRQ8_VECTOR + hwirq - 8; - SET_IVT(vector, func); -} - -static u8 -pic_isr1_read(void) -{ - if (!CONFIG_HARDWARE_IRQ) - return 0; - // 0x0b == select OCW1 + read ISR - outb(0x0b, PORT_PIC1_CMD); - return inb(PORT_PIC1_CMD); -} - -static u8 -pic_isr2_read(void) -{ - if (!CONFIG_HARDWARE_IRQ) - return 0; - // 0x0b == select OCW1 + read ISR - outb(0x0b, PORT_PIC2_CMD); - return inb(PORT_PIC2_CMD); -} - -// Handler for otherwise unused hardware irqs. -void VISIBLE16 -handle_hwpic1(void) -{ - dprintf(DEBUG_ISR_hwpic1, "handle_hwpic1 irq=%x\n", pic_isr1_read()); - pic_eoi1(); -} - -void VISIBLE16 -handle_hwpic2(void) -{ - dprintf(DEBUG_ISR_hwpic2, "handle_hwpic2 irq=%x\n", pic_isr2_read()); - pic_eoi2(); -} diff --git a/payloads/external/SeaBIOS/src/hw/pic.h b/payloads/external/SeaBIOS/src/hw/pic.h deleted file mode 100644 index f2d9f613..00000000 --- a/payloads/external/SeaBIOS/src/hw/pic.h +++ /dev/null @@ -1,60 +0,0 @@ -// Helpers for working with i8259 interrupt controller. -// -// Copyright (C) 2008 Kevin O'Connor <kevin@koconnor.net> -// Copyright (C) 2002 MandrakeSoft S.A. -// -// This file may be distributed under the terms of the GNU LGPLv3 license. -#ifndef __PIC_H -#define __PIC_H - -#include "x86.h" // outb - -#define PORT_PIC1_CMD 0x0020 -#define PORT_PIC1_DATA 0x0021 -#define PORT_PIC2_CMD 0x00a0 -#define PORT_PIC2_DATA 0x00a1 - -// PORT_PIC1 bitdefs -#define PIC1_IRQ0 (1<<0) -#define PIC1_IRQ1 (1<<1) -#define PIC1_IRQ2 (1<<2) -#define PIC1_IRQ5 (1<<5) -#define PIC1_IRQ6 (1<<6) -// PORT_PIC2 bitdefs -#define PIC2_IRQ8 (1<<8) -#define PIC2_IRQ12 (1<<12) -#define PIC2_IRQ13 (1<<13) -#define PIC2_IRQ14 (1<<14) - -#define PIC_IRQMASK_DEFAULT ((u16)~PIC1_IRQ2) - -#define BIOS_HWIRQ0_VECTOR 0x08 -#define BIOS_HWIRQ8_VECTOR 0x70 - -static inline void -pic_eoi1(void) -{ - if (!CONFIG_HARDWARE_IRQ) - return; - // Send eoi (select OCW2 + eoi) - outb(0x20, PORT_PIC1_CMD); -} - -static inline void -pic_eoi2(void) -{ - if (!CONFIG_HARDWARE_IRQ) - return; - // Send eoi (select OCW2 + eoi) - outb(0x20, PORT_PIC2_CMD); - pic_eoi1(); -} - -u16 pic_irqmask_read(void); -void pic_irqmask_write(u16 mask); -void pic_irqmask_mask(u16 off, u16 on); -void pic_reset(u8 irq0, u8 irq8); -void pic_setup(void); -void enable_hwirq(int hwirq, struct segoff_s func); - -#endif // pic.h diff --git a/payloads/external/SeaBIOS/src/hw/ps2port.c b/payloads/external/SeaBIOS/src/hw/ps2port.c deleted file mode 100644 index 9b099e82..00000000 --- a/payloads/external/SeaBIOS/src/hw/ps2port.c +++ /dev/null @@ -1,547 +0,0 @@ -// Support for handling the PS/2 mouse/keyboard ports. -// -// Copyright (C) 2008 Kevin O'Connor <kevin@koconnor.net> -// Several ideas taken from code Copyright (c) 1999-2004 Vojtech Pavlik -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "biosvar.h" // GET_LOW -#include "output.h" // dprintf -#include "pic.h" // pic_eoi1 -#include "ps2port.h" // ps2_kbd_command -#include "romfile.h" // romfile_loadint -#include "stacks.h" // yield -#include "util.h" // udelay -#include "x86.h" // inb - - -/**************************************************************** - * Low level i8042 commands. - ****************************************************************/ - -// Timeout value. -#define I8042_CTL_TIMEOUT 10000 - -#define I8042_BUFFER_SIZE 16 - -static int -i8042_wait_read(void) -{ - dprintf(7, "i8042_wait_read\n"); - int i; - for (i=0; i<I8042_CTL_TIMEOUT; i++) { - u8 status = inb(PORT_PS2_STATUS); - if (status & I8042_STR_OBF) - return 0; - udelay(50); - } - warn_timeout(); - return -1; -} - -static int -i8042_wait_write(void) -{ - dprintf(7, "i8042_wait_write\n"); - int i; - for (i=0; i<I8042_CTL_TIMEOUT; i++) { - u8 status = inb(PORT_PS2_STATUS); - if (! (status & I8042_STR_IBF)) - return 0; - udelay(50); - } - warn_timeout(); - return -1; -} - -static int -i8042_flush(void) -{ - dprintf(7, "i8042_flush\n"); - int i; - for (i=0; i<I8042_BUFFER_SIZE; i++) { - u8 status = inb(PORT_PS2_STATUS); - if (! (status & I8042_STR_OBF)) - return 0; - udelay(50); - u8 data = inb(PORT_PS2_DATA); - dprintf(7, "i8042 flushed %x (status=%x)\n", data, status); - } - - warn_timeout(); - return -1; -} - -static int -__i8042_command(int command, u8 *param) -{ - int receive = (command >> 8) & 0xf; - int send = (command >> 12) & 0xf; - - // Send the command. - int ret = i8042_wait_write(); - if (ret) - return ret; - outb(command, PORT_PS2_STATUS); - - // Send parameters (if any). - int i; - for (i = 0; i < send; i++) { - ret = i8042_wait_write(); - if (ret) - return ret; - outb(param[i], PORT_PS2_DATA); - } - - // Receive parameters (if any). - for (i = 0; i < receive; i++) { - ret = i8042_wait_read(); - if (ret) - return ret; - param[i] = inb(PORT_PS2_DATA); - dprintf(7, "i8042 param=%x\n", param[i]); - } - - return 0; -} - -static int -i8042_command(int command, u8 *param) -{ - dprintf(7, "i8042_command cmd=%x\n", command); - int ret = __i8042_command(command, param); - if (ret) - dprintf(2, "i8042 command %x failed\n", command); - return ret; -} - -static int -i8042_kbd_write(u8 c) -{ - dprintf(7, "i8042_kbd_write c=%d\n", c); - int ret = i8042_wait_write(); - if (! ret) - outb(c, PORT_PS2_DATA); - return ret; -} - -static int -i8042_aux_write(u8 c) -{ - return i8042_command(I8042_CMD_AUX_SEND, &c); -} - -void -i8042_reboot(void) -{ - if (! CONFIG_PS2PORT) - return; - int i; - for (i=0; i<10; i++) { - i8042_wait_write(); - udelay(50); - outb(0xfe, PORT_PS2_STATUS); /* pulse reset low */ - udelay(50); - } -} - - -/**************************************************************** - * Device commands. - ****************************************************************/ - -#define PS2_RET_ACK 0xfa -#define PS2_RET_NAK 0xfe - -static int -ps2_recvbyte(int aux, int needack, int timeout) -{ - u32 end = timer_calc(timeout); - for (;;) { - u8 status = inb(PORT_PS2_STATUS); - if (status & I8042_STR_OBF) { - u8 data = inb(PORT_PS2_DATA); - dprintf(7, "ps2 read %x\n", data); - - if (!!(status & I8042_STR_AUXDATA) == aux) { - if (!needack) - return data; - if (data == PS2_RET_ACK) - return data; - if (data == PS2_RET_NAK) { - dprintf(1, "Got ps2 nak (status=%x)\n", status); - return data; - } - } - - // This data not part of command - just discard it. - dprintf(1, "Discarding ps2 data %02x (status=%02x)\n", data, status); - } - - if (timer_check(end)) { - warn_timeout(); - return -1; - } - yield(); - } -} - -static int -ps2_sendbyte(int aux, u8 command, int timeout) -{ - dprintf(7, "ps2_sendbyte aux=%d cmd=%x\n", aux, command); - int ret; - if (aux) - ret = i8042_aux_write(command); - else - ret = i8042_kbd_write(command); - if (ret) - return ret; - - // Read ack. - ret = ps2_recvbyte(aux, 1, timeout); - if (ret < 0) - return ret; - if (ret != PS2_RET_ACK) - return -1; - - return 0; -} - -u8 Ps2ctr VARLOW = I8042_CTR_KBDDIS | I8042_CTR_AUXDIS; - -static int -__ps2_command(int aux, int command, u8 *param) -{ - int ret2; - int receive = (command >> 8) & 0xf; - int send = (command >> 12) & 0xf; - - // Disable interrupts and keyboard/mouse. - u8 ps2ctr = GET_LOW(Ps2ctr); - u8 newctr = ((ps2ctr | I8042_CTR_AUXDIS | I8042_CTR_KBDDIS) - & ~(I8042_CTR_KBDINT|I8042_CTR_AUXINT)); - dprintf(6, "i8042 ctr old=%x new=%x\n", ps2ctr, newctr); - int ret = i8042_command(I8042_CMD_CTL_WCTR, &newctr); - if (ret) - return ret; - - // Flush any interrupts already pending. - yield(); - - // Enable port command is being sent to. - SET_LOW(Ps2ctr, newctr); - if (aux) - newctr &= ~I8042_CTR_AUXDIS; - else - newctr &= ~I8042_CTR_KBDDIS; - ret = i8042_command(I8042_CMD_CTL_WCTR, &newctr); - if (ret) - goto fail; - - if ((u8)command == (u8)ATKBD_CMD_RESET_BAT) { - // Reset is special wrt timeouts. - - // Send command. - ret = ps2_sendbyte(aux, command, 1000); - if (ret) - goto fail; - - // Receive parameters. - ret = ps2_recvbyte(aux, 0, 4000); - if (ret < 0) - goto fail; - param[0] = ret; - if (receive > 1) { - ret = ps2_recvbyte(aux, 0, 500); - if (ret < 0) - goto fail; - param[1] = ret; - } - } else if (command == ATKBD_CMD_GETID) { - // Getid is special wrt bytes received. - - // Send command. - ret = ps2_sendbyte(aux, command, 200); - if (ret) - goto fail; - - // Receive parameters. - ret = ps2_recvbyte(aux, 0, 500); - if (ret < 0) - goto fail; - param[0] = ret; - if (ret == 0xab || ret == 0xac || ret == 0x2b || ret == 0x5d - || ret == 0x60 || ret == 0x47) { - // These ids (keyboards) return two bytes. - ret = ps2_recvbyte(aux, 0, 500); - if (ret < 0) - goto fail; - param[1] = ret; - } else { - param[1] = 0; - } - } else { - // Send command. - ret = ps2_sendbyte(aux, command, 200); - if (ret) - goto fail; - - // Send parameters (if any). - int i; - for (i = 0; i < send; i++) { - ret = ps2_sendbyte(aux, param[i], 200); - if (ret) - goto fail; - } - - // Receive parameters (if any). - for (i = 0; i < receive; i++) { - ret = ps2_recvbyte(aux, 0, 500); - if (ret < 0) - goto fail; - param[i] = ret; - } - } - - ret = 0; - -fail: - // Restore interrupts and keyboard/mouse. - SET_LOW(Ps2ctr, ps2ctr); - ret2 = i8042_command(I8042_CMD_CTL_WCTR, &ps2ctr); - if (ret2) - return ret2; - - return ret; -} - -static int -ps2_command(int aux, int command, u8 *param) -{ - dprintf(7, "ps2_command aux=%d cmd=%x\n", aux, command); - int ret = __ps2_command(aux, command, param); - if (ret) - dprintf(2, "ps2 command %x failed (aux=%d)\n", command, aux); - return ret; -} - -int -ps2_kbd_command(int command, u8 *param) -{ - if (! CONFIG_PS2PORT) - return -1; - return ps2_command(0, command, param); -} - -int -ps2_mouse_command(int command, u8 *param) -{ - if (! CONFIG_PS2PORT) - return -1; - - // Update ps2ctr for mouse enable/disable. - if (command == PSMOUSE_CMD_ENABLE || command == PSMOUSE_CMD_DISABLE) { - u8 ps2ctr = GET_LOW(Ps2ctr); - if (command == PSMOUSE_CMD_ENABLE) - ps2ctr = ((ps2ctr | (CONFIG_HARDWARE_IRQ ? I8042_CTR_AUXINT : 0)) - & ~I8042_CTR_AUXDIS); - else - ps2ctr = (ps2ctr | I8042_CTR_AUXDIS) & ~I8042_CTR_AUXINT; - SET_LOW(Ps2ctr, ps2ctr); - } - - return ps2_command(1, command, param); -} - - -/**************************************************************** - * IRQ handlers - ****************************************************************/ - -// INT74h : PS/2 mouse hardware interrupt -void VISIBLE16 -handle_74(void) -{ - if (! CONFIG_PS2PORT) - return; - - debug_isr(DEBUG_ISR_74); - - u8 v = inb(PORT_PS2_STATUS); - if ((v & (I8042_STR_OBF|I8042_STR_AUXDATA)) - != (I8042_STR_OBF|I8042_STR_AUXDATA)) { - dprintf(1, "ps2 mouse irq but no mouse data.\n"); - goto done; - } - v = inb(PORT_PS2_DATA); - - if (!(GET_LOW(Ps2ctr) & I8042_CTR_AUXINT)) - // Interrupts not enabled. - goto done; - - process_mouse(v); - -done: - pic_eoi2(); -} - -// INT09h : Keyboard Hardware Service Entry Point -void VISIBLE16 -handle_09(void) -{ - if (! CONFIG_PS2PORT) - return; - - debug_isr(DEBUG_ISR_09); - - // read key from keyboard controller - u8 v = inb(PORT_PS2_STATUS); - if (v & I8042_STR_AUXDATA) { - dprintf(1, "ps2 keyboard irq but found mouse data?!\n"); - goto done; - } - v = inb(PORT_PS2_DATA); - - if (!(GET_LOW(Ps2ctr) & I8042_CTR_KBDINT)) - // Interrupts not enabled. - goto done; - - process_key(v); - - // Some old programs expect ISR to turn keyboard back on. - i8042_command(I8042_CMD_KBD_ENABLE, NULL); - -done: - pic_eoi1(); -} - -// Check for ps2 activity on machines without hardware irqs -void -ps2_check_event(void) -{ - if (! CONFIG_PS2PORT || CONFIG_HARDWARE_IRQ) - return; - u8 ps2ctr = GET_LOW(Ps2ctr); - if ((ps2ctr & (I8042_CTR_KBDDIS|I8042_CTR_AUXDIS)) - == (I8042_CTR_KBDDIS|I8042_CTR_AUXDIS)) - return; - for (;;) { - u8 status = inb(PORT_PS2_STATUS); - if (!(status & I8042_STR_OBF)) - break; - u8 data = inb(PORT_PS2_DATA); - if (status & I8042_STR_AUXDATA) { - if (!(ps2ctr & I8042_CTR_AUXDIS)) - process_mouse(data); - } else { - if (!(ps2ctr & I8042_CTR_KBDDIS)) - process_key(data); - } - } -} - - -/**************************************************************** - * Setup - ****************************************************************/ - -static void -ps2_keyboard_setup(void *data) -{ - // flush incoming keys (also verifies port is likely present) - int ret = i8042_flush(); - if (ret) - return; - - // Disable keyboard / mouse and drain any input they may have sent - ret = i8042_command(I8042_CMD_KBD_DISABLE, NULL); - if (ret) - return; - ret = i8042_command(I8042_CMD_AUX_DISABLE, NULL); - if (ret) - return; - ret = i8042_flush(); - if (ret) - return; - - // Controller self-test. - u8 param[2]; - ret = i8042_command(I8042_CMD_CTL_TEST, param); - if (ret) - return; - if (param[0] != 0x55) { - dprintf(1, "i8042 self test failed (got %x not 0x55)\n", param[0]); - return; - } - - // Controller keyboard test. - ret = i8042_command(I8042_CMD_KBD_TEST, param); - if (ret) - return; - if (param[0] != 0x00) { - dprintf(1, "i8042 keyboard test failed (got %x not 0x00)\n", param[0]); - return; - } - - - /* ------------------- keyboard side ------------------------*/ - /* reset keyboard and self test (keyboard side) */ - int spinupdelay = romfile_loadint("etc/ps2-keyboard-spinup", 0); - u32 end = timer_calc(spinupdelay); - for (;;) { - ret = ps2_kbd_command(ATKBD_CMD_RESET_BAT, param); - if (!ret) - break; - if (timer_check(end)) { - if (spinupdelay) - warn_timeout(); - return; - } - yield(); - } - if (param[0] != 0xaa) { - dprintf(1, "keyboard self test failed (got %x not 0xaa)\n", param[0]); - return; - } - - /* Disable keyboard */ - ret = ps2_kbd_command(ATKBD_CMD_RESET_DIS, NULL); - if (ret) - return; - - // Set scancode command (mode 2) - param[0] = 0x02; - ret = ps2_kbd_command(ATKBD_CMD_SSCANSET, param); - if (ret) - return; - - // Keyboard Mode: disable mouse, scan code convert, enable kbd IRQ - Ps2ctr = (I8042_CTR_AUXDIS | I8042_CTR_XLATE - | (CONFIG_HARDWARE_IRQ ? I8042_CTR_KBDINT : 0)); - - /* Enable keyboard */ - ret = ps2_kbd_command(ATKBD_CMD_ENABLE, NULL); - if (ret) - return; - - dprintf(1, "PS2 keyboard initialized\n"); -} - -void -ps2port_setup(void) -{ - ASSERT32FLAT(); - if (! CONFIG_PS2PORT) - return; - if (acpi_dsdt_present_eisaid(0x0303) == 0) { - dprintf(1, "ACPI: no PS/2 keyboard present\n"); - return; - } - dprintf(3, "init ps2port\n"); - - enable_hwirq(1, FUNC16(entry_09)); - enable_hwirq(12, FUNC16(entry_74)); - - run_thread(ps2_keyboard_setup, NULL); -} diff --git a/payloads/external/SeaBIOS/src/hw/ps2port.h b/payloads/external/SeaBIOS/src/hw/ps2port.h deleted file mode 100644 index 1338406a..00000000 --- a/payloads/external/SeaBIOS/src/hw/ps2port.h +++ /dev/null @@ -1,67 +0,0 @@ -// Basic ps2 port (keyboard/mouse) command handling. -#ifndef __PS2PORT_H -#define __PS2PORT_H - -#include "types.h" // u8 - -#define PORT_PS2_DATA 0x0060 -#define PORT_PS2_STATUS 0x0064 - -// Standard commands. -#define I8042_CMD_CTL_RCTR 0x0120 -#define I8042_CMD_CTL_WCTR 0x1060 -#define I8042_CMD_CTL_TEST 0x01aa - -#define I8042_CMD_KBD_TEST 0x01ab -#define I8042_CMD_KBD_DISABLE 0x00ad -#define I8042_CMD_KBD_ENABLE 0x00ae - -#define I8042_CMD_AUX_DISABLE 0x00a7 -#define I8042_CMD_AUX_ENABLE 0x00a8 -#define I8042_CMD_AUX_SEND 0x10d4 - -// Keyboard commands -#define ATKBD_CMD_SETLEDS 0x10ed -#define ATKBD_CMD_SSCANSET 0x10f0 -#define ATKBD_CMD_GETID 0x02f2 -#define ATKBD_CMD_ENABLE 0x00f4 -#define ATKBD_CMD_RESET_DIS 0x00f5 -#define ATKBD_CMD_RESET_BAT 0x01ff - -// Mouse commands -#define PSMOUSE_CMD_SETSCALE11 0x00e6 -#define PSMOUSE_CMD_SETSCALE21 0x00e7 -#define PSMOUSE_CMD_SETRES 0x10e8 -#define PSMOUSE_CMD_GETINFO 0x03e9 -#define PSMOUSE_CMD_GETID 0x02f2 -#define PSMOUSE_CMD_SETRATE 0x10f3 -#define PSMOUSE_CMD_ENABLE 0x00f4 -#define PSMOUSE_CMD_DISABLE 0x00f5 -#define PSMOUSE_CMD_RESET_BAT 0x02ff - -// Status register bits. -#define I8042_STR_PARITY 0x80 -#define I8042_STR_TIMEOUT 0x40 -#define I8042_STR_AUXDATA 0x20 -#define I8042_STR_KEYLOCK 0x10 -#define I8042_STR_CMDDAT 0x08 -#define I8042_STR_MUXERR 0x04 -#define I8042_STR_IBF 0x02 -#define I8042_STR_OBF 0x01 - -// Control register bits. -#define I8042_CTR_KBDINT 0x01 -#define I8042_CTR_AUXINT 0x02 -#define I8042_CTR_IGNKEYLOCK 0x08 -#define I8042_CTR_KBDDIS 0x10 -#define I8042_CTR_AUXDIS 0x20 -#define I8042_CTR_XLATE 0x40 - -// ps2port.c -void i8042_reboot(void); -int ps2_kbd_command(int command, u8 *param); -int ps2_mouse_command(int command, u8 *param); -void ps2_check_event(void); -void ps2port_setup(void); - -#endif // ps2port.h diff --git a/payloads/external/SeaBIOS/src/hw/pvscsi.c b/payloads/external/SeaBIOS/src/hw/pvscsi.c deleted file mode 100644 index 3e5171ad..00000000 --- a/payloads/external/SeaBIOS/src/hw/pvscsi.c +++ /dev/null @@ -1,334 +0,0 @@ -// QEMU VMWARE Paravirtualized SCSI boot support. -// -// Copyright (c) 2013 Ravello Systems LTD (http://ravellosystems.com) -// -// Authors: -// Evgeny Budilovsky <evgeny.budilovsky@ravellosystems.com> -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "block.h" // struct drive_s -#include "blockcmd.h" // scsi_drive_setup -#include "config.h" // CONFIG_* -#include "malloc.h" // free -#include "memmap.h" // PAGE_SHIFT, virt_to_phys -#include "output.h" // dprintf -#include "pcidevice.h" // foreachpci -#include "pci_ids.h" // PCI_DEVICE_ID_VMWARE_PVSCSI -#include "pci_regs.h" // PCI_VENDOR_ID -#include "pvscsi.h" // pvscsi_setup -#include "stacks.h" // run_thread -#include "std/disk.h" // DISK_RET_SUCCESS -#include "string.h" // memset -#include "util.h" // usleep -#include "x86.h" // writel - -#define MASK(n) ((1 << (n)) - 1) - -#define SIMPLE_QUEUE_TAG 0x20 - -#define PVSCSI_INTR_CMPL_0 (1 << 0) -#define PVSCSI_INTR_CMPL_1 (1 << 1) -#define PVSCSI_INTR_CMPL_MASK MASK(2) - -#define PVSCSI_INTR_MSG_0 (1 << 2) -#define PVSCSI_INTR_MSG_1 (1 << 3) -#define PVSCSI_INTR_MSG_MASK (MASK(2) << 2) -#define PVSCSI_INTR_ALL_SUPPORTED MASK(4) - -#define PVSCSI_FLAG_CMD_WITH_SG_LIST (1 << 0) -#define PVSCSI_FLAG_CMD_OUT_OF_BAND_CDB (1 << 1) -#define PVSCSI_FLAG_CMD_DIR_NONE (1 << 2) -#define PVSCSI_FLAG_CMD_DIR_TOHOST (1 << 3) -#define PVSCSI_FLAG_CMD_DIR_TODEVICE (1 << 4) - -enum PVSCSIRegOffset { - PVSCSI_REG_OFFSET_COMMAND = 0x0, - PVSCSI_REG_OFFSET_COMMAND_DATA = 0x4, - PVSCSI_REG_OFFSET_COMMAND_STATUS = 0x8, - PVSCSI_REG_OFFSET_LAST_STS_0 = 0x100, - PVSCSI_REG_OFFSET_LAST_STS_1 = 0x104, - PVSCSI_REG_OFFSET_LAST_STS_2 = 0x108, - PVSCSI_REG_OFFSET_LAST_STS_3 = 0x10c, - PVSCSI_REG_OFFSET_INTR_STATUS = 0x100c, - PVSCSI_REG_OFFSET_INTR_MASK = 0x2010, - PVSCSI_REG_OFFSET_KICK_NON_RW_IO = 0x3014, - PVSCSI_REG_OFFSET_DEBUG = 0x3018, - PVSCSI_REG_OFFSET_KICK_RW_IO = 0x4018, -}; - -enum PVSCSICommands { - PVSCSI_CMD_FIRST = 0, - PVSCSI_CMD_ADAPTER_RESET = 1, - PVSCSI_CMD_ISSUE_SCSI = 2, - PVSCSI_CMD_SETUP_RINGS = 3, - PVSCSI_CMD_RESET_BUS = 4, - PVSCSI_CMD_RESET_DEVICE = 5, - PVSCSI_CMD_ABORT_CMD = 6, - PVSCSI_CMD_CONFIG = 7, - PVSCSI_CMD_SETUP_MSG_RING = 8, - PVSCSI_CMD_DEVICE_UNPLUG = 9, - PVSCSI_CMD_LAST = 10 -}; - -#define PVSCSI_SETUP_RINGS_MAX_NUM_PAGES 32 -struct PVSCSICmdDescSetupRings { - u32 reqRingNumPages; - u32 cmpRingNumPages; - u64 ringsStatePPN; - u64 reqRingPPNs[PVSCSI_SETUP_RINGS_MAX_NUM_PAGES]; - u64 cmpRingPPNs[PVSCSI_SETUP_RINGS_MAX_NUM_PAGES]; -} PACKED; - -struct PVSCSIRingCmpDesc { - u64 context; - u64 dataLen; - u32 senseLen; - u16 hostStatus; - u16 scsiStatus; - u32 pad[2]; -} PACKED; - -struct PVSCSIRingsState { - u32 reqProdIdx; - u32 reqConsIdx; - u32 reqNumEntriesLog2; - - u32 cmpProdIdx; - u32 cmpConsIdx; - u32 cmpNumEntriesLog2; - - u8 pad[104]; - - u32 msgProdIdx; - u32 msgConsIdx; - u32 msgNumEntriesLog2; -} PACKED; - -struct PVSCSIRingReqDesc { - u64 context; - u64 dataAddr; - u64 dataLen; - u64 senseAddr; - u32 senseLen; - u32 flags; - u8 cdb[16]; - u8 cdbLen; - u8 lun[8]; - u8 tag; - u8 bus; - u8 target; - u8 vcpuHint; - u8 unused[59]; -} PACKED; - -struct pvscsi_ring_dsc_s { - struct PVSCSIRingsState *ring_state; - struct PVSCSIRingReqDesc *ring_reqs; - struct PVSCSIRingCmpDesc *ring_cmps; -}; - -struct pvscsi_lun_s { - struct drive_s drive; - void *iobase; - u8 target; - u8 lun; - struct pvscsi_ring_dsc_s *ring_dsc; -}; - -static void -pvscsi_write_cmd_desc(void *iobase, u32 cmd, const void *desc, size_t len) -{ - const u32 *ptr = desc; - size_t i; - - len /= sizeof(*ptr); - writel(iobase + PVSCSI_REG_OFFSET_COMMAND, cmd); - for (i = 0; i < len; i++) - writel(iobase + PVSCSI_REG_OFFSET_COMMAND_DATA, ptr[i]); -} - -static void -pvscsi_kick_rw_io(void *iobase) -{ - writel(iobase + PVSCSI_REG_OFFSET_KICK_RW_IO, 0); -} - -static void -pvscsi_wait_intr_cmpl(void *iobase) -{ - while (!(readl(iobase + PVSCSI_REG_OFFSET_INTR_STATUS) & PVSCSI_INTR_CMPL_MASK)) - usleep(5); - writel(iobase + PVSCSI_REG_OFFSET_INTR_STATUS, PVSCSI_INTR_CMPL_MASK); -} - -static void -pvscsi_init_rings(void *iobase, struct pvscsi_ring_dsc_s **ring_dsc) -{ - struct PVSCSICmdDescSetupRings cmd = {0,}; - - struct pvscsi_ring_dsc_s *dsc = malloc_high(sizeof(*dsc)); - if (!dsc) { - warn_noalloc(); - return; - } - - dsc->ring_state = - (struct PVSCSIRingsState *)memalign_high(PAGE_SIZE, PAGE_SIZE); - dsc->ring_reqs = - (struct PVSCSIRingReqDesc *)memalign_high(PAGE_SIZE, PAGE_SIZE); - dsc->ring_cmps = - (struct PVSCSIRingCmpDesc *)memalign_high(PAGE_SIZE, PAGE_SIZE); - if (!dsc->ring_state || !dsc->ring_reqs || !dsc->ring_cmps) { - warn_noalloc(); - return; - } - memset(dsc->ring_state, 0, PAGE_SIZE); - memset(dsc->ring_reqs, 0, PAGE_SIZE); - memset(dsc->ring_cmps, 0, PAGE_SIZE); - - cmd.reqRingNumPages = 1; - cmd.cmpRingNumPages = 1; - cmd.ringsStatePPN = virt_to_phys(dsc->ring_state) >> PAGE_SHIFT; - cmd.reqRingPPNs[0] = virt_to_phys(dsc->ring_reqs) >> PAGE_SHIFT; - cmd.cmpRingPPNs[0] = virt_to_phys(dsc->ring_cmps) >> PAGE_SHIFT; - - pvscsi_write_cmd_desc(iobase, PVSCSI_CMD_SETUP_RINGS, - &cmd, sizeof(cmd)); - *ring_dsc = dsc; -} - -static u32 -pvscsi_get_rsp(struct PVSCSIRingsState *s, - struct PVSCSIRingCmpDesc *rsp) -{ - u32 status = rsp->hostStatus; - s->cmpConsIdx = s->cmpConsIdx + 1; - return status; -} - -int -pvscsi_process_op(struct disk_op_s *op) -{ - if (!CONFIG_PVSCSI) - return DISK_RET_EBADTRACK; - struct pvscsi_lun_s *plun = - container_of(op->drive_fl, struct pvscsi_lun_s, drive); - struct pvscsi_ring_dsc_s *ring_dsc = plun->ring_dsc; - struct PVSCSIRingsState *s = ring_dsc->ring_state; - u32 req_entries = s->reqNumEntriesLog2; - u32 cmp_entries = s->cmpNumEntriesLog2; - struct PVSCSIRingReqDesc *req; - struct PVSCSIRingCmpDesc *rsp; - u32 status; - - if (s->reqProdIdx - s->cmpConsIdx >= 1 << req_entries) { - dprintf(1, "pvscsi: ring full: reqProdIdx=%d cmpConsIdx=%d\n", - s->reqProdIdx, s->cmpConsIdx); - return DISK_RET_EBADTRACK; - } - - req = ring_dsc->ring_reqs + (s->reqProdIdx & MASK(req_entries)); - int blocksize = scsi_fill_cmd(op, req->cdb, 16); - if (blocksize < 0) - return default_process_op(op); - req->bus = 0; - req->target = plun->target; - memset(req->lun, 0, sizeof(req->lun)); - req->lun[1] = plun->lun; - req->senseLen = 0; - req->senseAddr = 0; - req->cdbLen = 16; - req->vcpuHint = 0; - req->tag = SIMPLE_QUEUE_TAG; - req->flags = scsi_is_read(op) ? - PVSCSI_FLAG_CMD_DIR_TOHOST : PVSCSI_FLAG_CMD_DIR_TODEVICE; - req->dataLen = op->count * blocksize; - req->dataAddr = (u32)op->buf_fl; - s->reqProdIdx = s->reqProdIdx + 1; - - pvscsi_kick_rw_io(plun->iobase); - pvscsi_wait_intr_cmpl(plun->iobase); - - rsp = ring_dsc->ring_cmps + (s->cmpConsIdx & MASK(cmp_entries)); - status = pvscsi_get_rsp(s, rsp); - - return status == 0 ? DISK_RET_SUCCESS : DISK_RET_EBADTRACK; -} - -static int -pvscsi_add_lun(struct pci_device *pci, void *iobase, - struct pvscsi_ring_dsc_s *ring_dsc, u8 target, u8 lun) -{ - struct pvscsi_lun_s *plun = malloc_fseg(sizeof(*plun)); - if (!plun) { - warn_noalloc(); - return -1; - } - memset(plun, 0, sizeof(*plun)); - plun->drive.type = DTYPE_PVSCSI; - plun->drive.cntl_id = pci->bdf; - plun->target = target; - plun->lun = lun; - plun->iobase = iobase; - plun->ring_dsc = ring_dsc; - - boot_lchs_find_scsi_device(pci, target, lun, &(plun->drive.lchs)); - char *name = znprintf(MAXDESCSIZE, "pvscsi %pP %d:%d", pci, target, lun); - int prio = bootprio_find_scsi_device(pci, target, lun); - int ret = scsi_drive_setup(&plun->drive, name, prio); - free(name); - if (ret) - goto fail; - return 0; - -fail: - free(plun); - return -1; -} - -static void -pvscsi_scan_target(struct pci_device *pci, void *iobase, - struct pvscsi_ring_dsc_s *ring_dsc, u8 target) -{ - /* pvscsi has no more than a single lun per target */ - pvscsi_add_lun(pci, iobase, ring_dsc, target, 0); -} - -static void -init_pvscsi(void *data) -{ - struct pci_device *pci = data; - void *iobase = pci_enable_membar(pci, PCI_BASE_ADDRESS_0); - if (!iobase) - return; - pci_enable_busmaster(pci); - - dprintf(1, "found pvscsi at %pP, io @ %p\n", pci, iobase); - - pvscsi_write_cmd_desc(iobase, PVSCSI_CMD_ADAPTER_RESET, NULL, 0); - - struct pvscsi_ring_dsc_s *ring_dsc = NULL; - pvscsi_init_rings(iobase, &ring_dsc); - int i; - for (i = 0; i < 64; i++) - pvscsi_scan_target(pci, iobase, ring_dsc, i); -} - -void -pvscsi_setup(void) -{ - ASSERT32FLAT(); - if (! CONFIG_PVSCSI) - return; - - dprintf(3, "init pvscsi\n"); - - struct pci_device *pci; - foreachpci(pci) { - if (pci->vendor != PCI_VENDOR_ID_VMWARE - || pci->device != PCI_DEVICE_ID_VMWARE_PVSCSI) - continue; - run_thread(init_pvscsi, pci); - } -} diff --git a/payloads/external/SeaBIOS/src/hw/pvscsi.h b/payloads/external/SeaBIOS/src/hw/pvscsi.h deleted file mode 100644 index 5af7dcb0..00000000 --- a/payloads/external/SeaBIOS/src/hw/pvscsi.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef _PVSCSI_H_ -#define _PVSCSI_H_ - -struct disk_op_s; -int pvscsi_process_op(struct disk_op_s *op); -void pvscsi_setup(void); - -#endif /* _PVSCSI_H_ */ diff --git a/payloads/external/SeaBIOS/src/hw/ramdisk.c b/payloads/external/SeaBIOS/src/hw/ramdisk.c deleted file mode 100644 index b9e9baab..00000000 --- a/payloads/external/SeaBIOS/src/hw/ramdisk.c +++ /dev/null @@ -1,108 +0,0 @@ -// Code for emulating a drive via high-memory accesses. -// -// Copyright (C) 2009 Kevin O'Connor <kevin@koconnor.net> -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "biosvar.h" // GET_GLOBALFLAT -#include "block.h" // struct drive_s -#include "bregs.h" // struct bregs -#include "e820map.h" // e820_add -#include "malloc.h" // memalign_tmphigh -#include "memmap.h" // PAGE_SIZE -#include "output.h" // dprintf -#include "romfile.h" // romfile_findprefix -#include "stacks.h" // call16_int -#include "std/disk.h" // DISK_RET_SUCCESS -#include "string.h" // memset -#include "util.h" // process_ramdisk_op - -void -ramdisk_setup(void) -{ - if (!CONFIG_FLASH_FLOPPY) - return; - - // Find image. - struct romfile_s *file = romfile_findprefix("floppyimg/", NULL); - if (!file) - return; - const char *filename = file->name; - u32 size = file->size; - dprintf(3, "Found floppy file %s of size %d\n", filename, size); - int ftype = find_floppy_type(size); - if (ftype < 0) { - dprintf(3, "No floppy type found for ramdisk size\n"); - return; - } - - // Allocate ram for image. - void *pos = memalign_tmphigh(PAGE_SIZE, size); - if (!pos) { - warn_noalloc(); - return; - } - e820_add((u32)pos, size, E820_RESERVED); - - // Copy image into ram. - int ret = file->copy(file, pos, size); - if (ret < 0) - return; - - // Setup driver. - struct drive_s *drive = init_floppy((u32)pos, ftype); - if (!drive) - return; - drive->type = DTYPE_RAMDISK; - dprintf(1, "Mapping floppy %s to addr %p\n", filename, pos); - char *desc = znprintf(MAXDESCSIZE, "Ramdisk [%s]", &filename[10]); - boot_add_floppy(drive, desc, bootprio_find_named_rom(filename, 0)); -} - -static int -ramdisk_copy(struct disk_op_s *op, int iswrite) -{ - u32 offset = GET_GLOBALFLAT(op->drive_fl->cntl_id); - offset += (u32)op->lba * DISK_SECTOR_SIZE; - u64 opd = GDT_DATA | GDT_LIMIT(0xfffff) | GDT_BASE((u32)op->buf_fl); - u64 ramd = GDT_DATA | GDT_LIMIT(0xfffff) | GDT_BASE(offset); - - u64 gdt[6]; - if (iswrite) { - gdt[2] = opd; - gdt[3] = ramd; - } else { - gdt[2] = ramd; - gdt[3] = opd; - } - - // Call int 1587 to copy data. - struct bregs br; - memset(&br, 0, sizeof(br)); - br.flags = F_CF|F_IF; - br.ah = 0x87; - br.es = GET_SEG(SS); - br.si = (u32)gdt; - br.cx = op->count * DISK_SECTOR_SIZE / 2; - call16_int(0x15, &br); - - if (br.flags & F_CF) - return DISK_RET_EBADTRACK; - return DISK_RET_SUCCESS; -} - -int -ramdisk_process_op(struct disk_op_s *op) -{ - if (!CONFIG_FLASH_FLOPPY) - return 0; - - switch (op->command) { - case CMD_READ: - return ramdisk_copy(op, 0); - case CMD_WRITE: - return ramdisk_copy(op, 1); - default: - return default_process_op(op); - } -} diff --git a/payloads/external/SeaBIOS/src/hw/rtc.c b/payloads/external/SeaBIOS/src/hw/rtc.c deleted file mode 100644 index 9649a5a7..00000000 --- a/payloads/external/SeaBIOS/src/hw/rtc.c +++ /dev/null @@ -1,100 +0,0 @@ -// Support for MC146818 Real Time Clock chip. -// -// Copyright (C) 2008-2013 Kevin O'Connor <kevin@koconnor.net> -// Copyright (C) 2002 MandrakeSoft S.A. -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "biosvar.h" // GET_LOW -#include "rtc.h" // rtc_read -#include "stacks.h" // yield -#include "util.h" // timer_calc -#include "x86.h" // inb - -u8 -rtc_read(u8 index) -{ - index |= NMI_DISABLE_BIT; - outb(index, PORT_CMOS_INDEX); - return inb(PORT_CMOS_DATA); -} - -void -rtc_write(u8 index, u8 val) -{ - index |= NMI_DISABLE_BIT; - outb(index, PORT_CMOS_INDEX); - outb(val, PORT_CMOS_DATA); -} - -void -rtc_mask(u8 index, u8 off, u8 on) -{ - index |= NMI_DISABLE_BIT; - outb(index, PORT_CMOS_INDEX); - u8 val = inb(PORT_CMOS_DATA); - outb((val & ~off) | on, PORT_CMOS_DATA); -} - -int -rtc_updating(void) -{ - // This function checks to see if the update-in-progress bit - // is set in CMOS Status Register A. If not, it returns 0. - // If it is set, it tries to wait until there is a transition - // to 0, and will return 0 if such a transition occurs. A -1 - // is returned only after timing out. The maximum period - // that this bit should be set is constrained to (1984+244) - // useconds, but we wait for longer just to be sure. - - if ((rtc_read(CMOS_STATUS_A) & RTC_A_UIP) == 0) - return 0; - u32 end = timer_calc(15); - for (;;) { - if ((rtc_read(CMOS_STATUS_A) & RTC_A_UIP) == 0) - return 0; - if (timer_check(end)) - // update-in-progress never transitioned to 0 - return -1; - yield(); - } -} - -void -rtc_setup(void) -{ - if (!CONFIG_RTC_TIMER) - return; - rtc_write(CMOS_STATUS_A, 0x26); // 32,768Khz src, 976.5625us updates - rtc_mask(CMOS_STATUS_B, ~RTC_B_DSE, RTC_B_24HR); - rtc_read(CMOS_STATUS_C); - rtc_read(CMOS_STATUS_D); -} - -int RTCusers VARLOW; - -void -rtc_use(void) -{ - if (!CONFIG_RTC_TIMER) - return; - int count = GET_LOW(RTCusers); - SET_LOW(RTCusers, count+1); - if (count) - return; - // Turn on the Periodic Interrupt timer - rtc_mask(CMOS_STATUS_B, 0, RTC_B_PIE); -} - -void -rtc_release(void) -{ - if (!CONFIG_RTC_TIMER) - return; - int count = GET_LOW(RTCusers); - SET_LOW(RTCusers, count-1); - if (count != 1) - return; - // Clear the Periodic Interrupt. - rtc_mask(CMOS_STATUS_B, RTC_B_PIE, 0); -} diff --git a/payloads/external/SeaBIOS/src/hw/rtc.h b/payloads/external/SeaBIOS/src/hw/rtc.h deleted file mode 100644 index 252e73a4..00000000 --- a/payloads/external/SeaBIOS/src/hw/rtc.h +++ /dev/null @@ -1,75 +0,0 @@ -#ifndef __RTC_H -#define __RTC_H - -#define PORT_CMOS_INDEX 0x0070 -#define PORT_CMOS_DATA 0x0071 - -// PORT_CMOS_INDEX nmi disable bit -#define NMI_DISABLE_BIT 0x80 - -// Standard BIOS RTC chip entries -#define CMOS_RTC_SECONDS 0x00 -#define CMOS_RTC_SECONDS_ALARM 0x01 -#define CMOS_RTC_MINUTES 0x02 -#define CMOS_RTC_MINUTES_ALARM 0x03 -#define CMOS_RTC_HOURS 0x04 -#define CMOS_RTC_HOURS_ALARM 0x05 -#define CMOS_RTC_DAY_WEEK 0x06 -#define CMOS_RTC_DAY_MONTH 0x07 -#define CMOS_RTC_MONTH 0x08 -#define CMOS_RTC_YEAR 0x09 -#define CMOS_STATUS_A 0x0a -#define CMOS_STATUS_B 0x0b -#define CMOS_STATUS_C 0x0c -#define CMOS_STATUS_D 0x0d -#define CMOS_RESET_CODE 0x0f - -// QEMU cmos config fields. DO NOT ADD MORE. (All new content should -// be passed via the fw_cfg "file" interface.) -#define CMOS_FLOPPY_DRIVE_TYPE 0x10 -#define CMOS_DISK_DATA 0x12 -#define CMOS_EQUIPMENT_INFO 0x14 -#define CMOS_DISK_DRIVE1_TYPE 0x19 -#define CMOS_DISK_DRIVE2_TYPE 0x1a -#define CMOS_DISK_DRIVE1_CYL 0x1b -#define CMOS_DISK_DRIVE2_CYL 0x24 -#define CMOS_MEM_EXTMEM_LOW 0x30 -#define CMOS_MEM_EXTMEM_HIGH 0x31 -#define CMOS_CENTURY 0x32 -#define CMOS_MEM_EXTMEM2_LOW 0x34 -#define CMOS_MEM_EXTMEM2_HIGH 0x35 -#define CMOS_BIOS_BOOTFLAG1 0x38 -#define CMOS_BIOS_DISKTRANSFLAG 0x39 -#define CMOS_BIOS_BOOTFLAG2 0x3d -#define CMOS_MEM_HIGHMEM_LOW 0x5b -#define CMOS_MEM_HIGHMEM_MID 0x5c -#define CMOS_MEM_HIGHMEM_HIGH 0x5d -#define CMOS_BIOS_SMP_COUNT 0x5f - -// RTC register flags -#define RTC_A_UIP 0x80 - -#define RTC_B_SET 0x80 -#define RTC_B_PIE 0x40 -#define RTC_B_AIE 0x20 -#define RTC_B_UIE 0x10 -#define RTC_B_BIN 0x04 -#define RTC_B_24HR 0x02 -#define RTC_B_DSE 0x01 - -#ifndef __ASSEMBLY__ - -#include "types.h" // u8 - -// rtc.c -u8 rtc_read(u8 index); -void rtc_write(u8 index, u8 val); -void rtc_mask(u8 index, u8 off, u8 on); -int rtc_updating(void); -void rtc_setup(void); -void rtc_use(void); -void rtc_release(void); - -#endif // !__ASSEMBLY__ - -#endif // rtc.h diff --git a/payloads/external/SeaBIOS/src/hw/sdcard.c b/payloads/external/SeaBIOS/src/hw/sdcard.c deleted file mode 100644 index ab7007bc..00000000 --- a/payloads/external/SeaBIOS/src/hw/sdcard.c +++ /dev/null @@ -1,572 +0,0 @@ -// PCI SD Host Controller Interface -// -// Copyright (C) 2014 Kevin O'Connor <kevin@koconnor.net> -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "block.h" // struct drive_s -#include "malloc.h" // malloc_fseg -#include "output.h" // znprintf -#include "pcidevice.h" // foreachpci -#include "pci_ids.h" // PCI_CLASS_SYSTEM_SDHCI -#include "pci_regs.h" // PCI_BASE_ADDRESS_0 -#include "romfile.h" // romfile_findprefix -#include "stacks.h" // yield -#include "std/disk.h" // DISK_RET_SUCCESS -#include "string.h" // memset -#include "util.h" // boot_add_hd -#include "x86.h" // writel - -// SDHCI MMIO registers -struct sdhci_s { - u32 sdma_addr; - u16 block_size; - u16 block_count; - u32 arg; - u16 transfer_mode; - u16 cmd; - u32 response[4]; - u32 data; - u32 present_state; - u8 host_control; - u8 power_control; - u8 block_gap_control; - u8 wakeup_control; - u16 clock_control; - u8 timeout_control; - u8 software_reset; - u16 irq_status; - u16 error_irq_status; - u16 irq_enable; - u16 error_irq_enable; - u16 irq_signal; - u16 error_signal; - u16 auto_cmd12; - u16 host_control2; - u32 cap_lo, cap_hi; - u64 max_current; - u16 force_auto_cmd12; - u16 force_error; - u8 adma_error; - u8 pad_55[3]; - u64 adma_addr; - u8 pad_60[156]; - u16 slot_irq; - u16 controller_version; -} PACKED; - -// SDHCI commands -#define SCB_R0 0x00 // No response -#define SCB_R48 0x1a // Response R1 (no data), R5, R6, R7 -#define SCB_R48d 0x3a // Response R1 (with data) -#define SCB_R48b 0x1b // Response R1b, R5b -#define SCB_R48o 0x02 // Response R3, R4 -#define SCB_R136 0x09 // Response R2 -#define SC_GO_IDLE_STATE ((0<<8) | SCB_R0) -#define SC_SEND_OP_COND ((1<<8) | SCB_R48o) -#define SC_ALL_SEND_CID ((2<<8) | SCB_R136) -#define SC_SEND_RELATIVE_ADDR ((3<<8) | SCB_R48) -#define SC_SELECT_DESELECT_CARD ((7<<8) | SCB_R48b) -#define SC_SEND_IF_COND ((8<<8) | SCB_R48) -#define SC_SEND_EXT_CSD ((8<<8) | SCB_R48d) -#define SC_SEND_CSD ((9<<8) | SCB_R136) -#define SC_READ_SINGLE ((17<<8) | SCB_R48d) -#define SC_READ_MULTIPLE ((18<<8) | SCB_R48d) -#define SC_WRITE_SINGLE ((24<<8) | SCB_R48d) -#define SC_WRITE_MULTIPLE ((25<<8) | SCB_R48d) -#define SC_APP_CMD ((55<<8) | SCB_R48) -#define SC_APP_SEND_OP_COND ((41<<8) | SCB_R48o) - -// SDHCI irqs -#define SI_CMD_COMPLETE (1<<0) -#define SI_TRANS_DONE (1<<1) -#define SI_WRITE_READY (1<<4) -#define SI_READ_READY (1<<5) -#define SI_ERROR (1<<15) - -// SDHCI present_state flags -#define SP_CMD_INHIBIT (1<<0) -#define SP_DAT_INHIBIT (1<<1) -#define SP_CARD_INSERTED (1<<16) - -// SDHCI transfer_mode flags -#define ST_BLOCKCOUNT (1<<1) -#define ST_AUTO_CMD12 (1<<2) -#define ST_READ (1<<4) -#define ST_MULTIPLE (1<<5) - -// SDHCI capabilities flags -#define SD_CAPLO_V33 (1<<24) -#define SD_CAPLO_V30 (1<<25) -#define SD_CAPLO_V18 (1<<26) -#define SD_CAPLO_BASECLOCK_SHIFT 8 -#define SD_CAPLO_BASECLOCK_MASK 0xff - -// SDHCI clock control flags -#define SCC_INTERNAL_ENABLE (1<<0) -#define SCC_STABLE (1<<1) -#define SCC_CLOCK_ENABLE (1<<2) -#define SCC_SDCLK_MASK 0xff -#define SCC_SDCLK_SHIFT 8 -#define SCC_SDCLK_HI_MASK 0x300 -#define SCC_SDCLK_HI_RSHIFT 2 - -// SDHCI power control flags -#define SPC_POWER_ON (1<<0) -#define SPC_V18 0x0a -#define SPC_V30 0x0c -#define SPC_V33 0x0e - -// SDHCI software reset flags -#define SRF_ALL 0x01 -#define SRF_CMD 0x02 -#define SRF_DATA 0x04 - -// SDHCI result flags -#define SR_OCR_CCS (1<<30) -#define SR_OCR_NOTBUSY (1<<31) - -// SDHCI timeouts -#define SDHCI_POWER_OFF_TIME 1 -#define SDHCI_POWER_ON_TIME 5 -#define SDHCI_CLOCK_ON_TIME 1 // 74 clock cycles -#define SDHCI_POWERUP_TIMEOUT 1000 -#define SDHCI_PIO_TIMEOUT 1000 // XXX - this is just made up - -// Internal 'struct drive_s' storage for a detected card -struct sddrive_s { - struct drive_s drive; - struct sdhci_s *regs; - int card_type; -}; - -// SD card types -#define SF_MMC (1<<0) -#define SF_HIGHCAPACITY (1<<1) - -// Repeatedly read a u16 register until any bit in a given mask is set -static int -sdcard_waitw(u16 *reg, u16 mask) -{ - u32 end = timer_calc(SDHCI_PIO_TIMEOUT); - for (;;) { - u16 v = readw(reg); - if (v & mask) - return v; - if (timer_check(end)) { - dprintf(1, "scard_waitw: %p %x %x\n", reg, mask, v); - warn_timeout(); - return -1; - } - yield(); - } -} - -// Send an sdhci reset -static int -sdcard_reset(struct sdhci_s *regs, int flags) -{ - writeb(®s->software_reset, flags); - u32 end = timer_calc(SDHCI_PIO_TIMEOUT); - while (readb(®s->software_reset)) - if (timer_check(end)) { - warn_timeout(); - return -1; - } - return 0; -} - -// Send a command to the card. -static int -sdcard_pio(struct sdhci_s *regs, int cmd, u32 *param) -{ - u32 state = readl(®s->present_state); - dprintf(9, "sdcard_pio cmd %x %x %x\n", cmd, *param, state); - if ((state & SP_CMD_INHIBIT) - || ((cmd & 0x03) == 0x03 && state & SP_DAT_INHIBIT)) { - dprintf(1, "sdcard_pio not ready %x\n", state); - return -1; - } - // Send command - writel(®s->arg, *param); - writew(®s->cmd, cmd); - int ret = sdcard_waitw(®s->irq_status, SI_ERROR|SI_CMD_COMPLETE); - if (ret < 0) - return ret; - if (ret & SI_ERROR) { - u16 err = readw(®s->error_irq_status); - dprintf(3, "sdcard_pio command stop (code=%x)\n", err); - sdcard_reset(regs, SRF_CMD|SRF_DATA); - writew(®s->error_irq_status, err); - return -1; - } - writew(®s->irq_status, SI_CMD_COMPLETE); - // Read response - memcpy(param, regs->response, sizeof(regs->response)); - dprintf(9, "sdcard cmd %x response %x %x %x %x\n" - , cmd, param[0], param[1], param[2], param[3]); - return 0; -} - -// Send an "app specific" command to the card. -static int -sdcard_pio_app(struct sdhci_s *regs, int cmd, u32 *param) -{ - u32 aparam[4] = {}; - int ret = sdcard_pio(regs, SC_APP_CMD, aparam); - if (ret) - return ret; - return sdcard_pio(regs, cmd, param); -} - -// Send a command to the card which transfers data. -static int -sdcard_pio_transfer(struct sddrive_s *drive, int cmd, u32 addr - , void *data, int count) -{ - // Send command - writew(&drive->regs->block_size, DISK_SECTOR_SIZE); - writew(&drive->regs->block_count, count); - int isread = cmd != SC_WRITE_SINGLE && cmd != SC_WRITE_MULTIPLE; - u16 tmode = ((count > 1 ? ST_MULTIPLE|ST_AUTO_CMD12|ST_BLOCKCOUNT : 0) - | (isread ? ST_READ : 0)); - writew(&drive->regs->transfer_mode, tmode); - if (!(drive->card_type & SF_HIGHCAPACITY)) - addr *= DISK_SECTOR_SIZE; - u32 param[4] = { addr }; - int ret = sdcard_pio(drive->regs, cmd, param); - if (ret) - return ret; - // Read/write data - u16 cbit = isread ? SI_READ_READY : SI_WRITE_READY; - while (count--) { - ret = sdcard_waitw(&drive->regs->irq_status, cbit); - if (ret < 0) - return ret; - writew(&drive->regs->irq_status, cbit); - int i; - for (i=0; i<DISK_SECTOR_SIZE/4; i++) { - if (isread) - *(u32*)data = readl(&drive->regs->data); - else - writel(&drive->regs->data, *(u32*)data); - data += 4; - } - } - // Complete command - ret = sdcard_waitw(&drive->regs->irq_status, SI_TRANS_DONE); - if (ret < 0) - return ret; - writew(&drive->regs->irq_status, SI_TRANS_DONE); - return 0; -} - -// Read/write a block of data to/from the card. -static int -sdcard_readwrite(struct disk_op_s *op, int iswrite) -{ - struct sddrive_s *drive = container_of( - op->drive_fl, struct sddrive_s, drive); - int cmd = iswrite ? SC_WRITE_SINGLE : SC_READ_SINGLE; - if (op->count > 1) - cmd = iswrite ? SC_WRITE_MULTIPLE : SC_READ_MULTIPLE; - int ret = sdcard_pio_transfer(drive, cmd, op->lba, op->buf_fl, op->count); - if (ret) - return DISK_RET_EBADTRACK; - return DISK_RET_SUCCESS; -} - -int -sdcard_process_op(struct disk_op_s *op) -{ - if (!CONFIG_SDCARD) - return 0; - switch (op->command) { - case CMD_READ: - return sdcard_readwrite(op, 0); - case CMD_WRITE: - return sdcard_readwrite(op, 1); - default: - return default_process_op(op); - } -} - - -/**************************************************************** - * Setup - ****************************************************************/ - -static int -sdcard_set_power(struct sdhci_s *regs) -{ - u32 cap = readl(®s->cap_lo); - u32 volt, vbits; - if (cap & SD_CAPLO_V33) { - volt = 1<<20; - vbits = SPC_V33; - } else if (cap & SD_CAPLO_V30) { - volt = 1<<18; - vbits = SPC_V30; - } else if (cap & SD_CAPLO_V18) { - volt = 1<<7; - vbits = SPC_V18; - } else { - dprintf(1, "SD controller unsupported volt range (%x)\n", cap); - return -1; - } - writeb(®s->power_control, 0); - msleep(SDHCI_POWER_OFF_TIME); - writeb(®s->power_control, vbits | SPC_POWER_ON); - msleep(SDHCI_POWER_ON_TIME); - return volt; -} - -static int -sdcard_set_frequency(struct sdhci_s *regs, u32 khz) -{ - u16 ver = readw(®s->controller_version); - u32 cap = readl(®s->cap_lo); - u32 base_freq = (cap >> SD_CAPLO_BASECLOCK_SHIFT) & SD_CAPLO_BASECLOCK_MASK; - if (!base_freq) { - dprintf(1, "Unknown base frequency for SD controller\n"); - return -1; - } - // Set new frequency - u32 divisor = DIV_ROUND_UP(base_freq * 1000, khz); - u16 creg; - if ((ver & 0xff) <= 0x01) { - divisor = divisor > 1 ? 1 << __fls(divisor-1) : 0; - creg = (divisor & SCC_SDCLK_MASK) << SCC_SDCLK_SHIFT; - } else { - divisor = DIV_ROUND_UP(divisor, 2); - creg = (divisor & SCC_SDCLK_MASK) << SCC_SDCLK_SHIFT; - creg |= (divisor & SCC_SDCLK_HI_MASK) >> SCC_SDCLK_HI_RSHIFT; - } - dprintf(3, "sdcard_set_frequency %d %d %x\n", base_freq, khz, creg); - writew(®s->clock_control, 0); - writew(®s->clock_control, creg | SCC_INTERNAL_ENABLE); - // Wait for frequency to become active - int ret = sdcard_waitw(®s->clock_control, SCC_STABLE); - if (ret < 0) - return ret; - // Enable SD clock - writew(®s->clock_control, creg | SCC_INTERNAL_ENABLE | SCC_CLOCK_ENABLE); - return 0; -} - -// Obtain the disk size of an SD card -static int -sdcard_get_capacity(struct sddrive_s *drive, u8 *csd) -{ - // Original MMC/SD card capacity formula - u16 C_SIZE = (csd[6] >> 6) | (csd[7] << 2) | ((csd[8] & 0x03) << 10); - u8 C_SIZE_MULT = (csd[4] >> 7) | ((csd[5] & 0x03) << 1); - u8 READ_BL_LEN = csd[9] & 0x0f; - u32 count = (C_SIZE+1) << (C_SIZE_MULT + 2 + READ_BL_LEN - 9); - // Check for newer encoding formats. - u8 CSD_STRUCTURE = csd[14] >> 6; - if ((drive->card_type & SF_MMC) && CSD_STRUCTURE >= 2) { - // Get capacity from EXT_CSD register - u8 ext_csd[512]; - int ret = sdcard_pio_transfer(drive, SC_SEND_EXT_CSD, 0, ext_csd, 1); - if (ret) - return ret; - count = *(u32*)&ext_csd[212]; - } else if (!(drive->card_type & SF_MMC) && CSD_STRUCTURE >= 1) { - // High capacity SD card - u32 C_SIZE2 = csd[5] | (csd[6] << 8) | ((csd[7] & 0x3f) << 16); - count = (C_SIZE2+1) << (19-9); - } - // Fill drive struct and return - drive->drive.blksize = DISK_SECTOR_SIZE; - drive->drive.sectors = count; - return 0; -} - -// Initialize an SD card -static int -sdcard_card_setup(struct sddrive_s *drive, int volt, int prio) -{ - struct sdhci_s *regs = drive->regs; - // Set controller to initialization clock rate - int ret = sdcard_set_frequency(regs, 400); - if (ret) - return ret; - msleep(SDHCI_CLOCK_ON_TIME); - // Reset card - u32 param[4] = { }; - ret = sdcard_pio(regs, SC_GO_IDLE_STATE, param); - if (ret) - return ret; - // Let card know SDHC/SDXC is supported and confirm voltage - u32 hcs = 0, vrange = (volt >= (1<<15) ? 0x100 : 0x200) | 0xaa; - param[0] = vrange; - ret = sdcard_pio(regs, SC_SEND_IF_COND, param); - if (!ret && param[0] == vrange) - hcs = (1<<30); - // Verify SD card (instead of MMC or SDIO) - param[0] = 0x00; - ret = sdcard_pio_app(regs, SC_APP_SEND_OP_COND, param); - if (ret) { - // Check for MMC card - param[0] = 0x00; - ret = sdcard_pio(regs, SC_SEND_OP_COND, param); - if (ret) - return ret; - drive->card_type |= SF_MMC; - hcs = (1<<30); - } - // Init card - u32 end = timer_calc(SDHCI_POWERUP_TIMEOUT); - for (;;) { - param[0] = hcs | volt; // high-capacity support and voltage level - if (drive->card_type & SF_MMC) - ret = sdcard_pio(regs, SC_SEND_OP_COND, param); - else - ret = sdcard_pio_app(regs, SC_APP_SEND_OP_COND, param); - if (ret) - return ret; - if (param[0] & SR_OCR_NOTBUSY) - break; - if (timer_check(end)) { - warn_timeout(); - return -1; - } - msleep(5); // Avoid flooding log when debugging - } - drive->card_type |= (param[0] & SR_OCR_CCS) ? SF_HIGHCAPACITY : 0; - // Select card (get cid, set rca, get csd, select card) - param[0] = 0x00; - ret = sdcard_pio(regs, SC_ALL_SEND_CID, param); - if (ret) - return ret; - u8 cid[16]; - memcpy(cid, param, sizeof(cid)); - param[0] = drive->card_type & SF_MMC ? 0x0001 << 16 : 0x00; - ret = sdcard_pio(regs, SC_SEND_RELATIVE_ADDR, param); - if (ret) - return ret; - u16 rca = drive->card_type & SF_MMC ? 0x0001 : param[0] >> 16; - param[0] = rca << 16; - ret = sdcard_pio(regs, SC_SEND_CSD, param); - if (ret) - return ret; - u8 csd[16]; - memcpy(csd, param, sizeof(csd)); - param[0] = rca << 16; - ret = sdcard_pio(regs, SC_SELECT_DESELECT_CARD, param); - if (ret) - return ret; - // Set controller to data transfer clock rate - ret = sdcard_set_frequency(regs, 25000); - if (ret) - return ret; - // Register drive - ret = sdcard_get_capacity(drive, csd); - if (ret) - return ret; - char pnm[7] = {}; - int i; - for (i=0; i < (drive->card_type & SF_MMC ? 6 : 5); i++) - pnm[i] = cid[11-i]; - char *desc = znprintf(MAXDESCSIZE, "%s %s %dMiB" - , drive->card_type & SF_MMC ? "MMC drive" : "SD card" - , pnm, (u32)(drive->drive.sectors >> 11)); - dprintf(1, "Found sdcard at %p: %s\n", regs, desc); - boot_add_hd(&drive->drive, desc, prio); - return 0; -} - -// Setup and configure an SD card controller -static void -sdcard_controller_setup(struct sdhci_s *regs, int prio) -{ - // Initialize controller - u32 present_state = readl(®s->present_state); - if (!(present_state & SP_CARD_INSERTED)) - // No card present - return; - dprintf(3, "sdhci@%p ver=%x cap=%x %x\n", regs - , readw(®s->controller_version) - , readl(®s->cap_lo), readl(®s->cap_hi)); - sdcard_reset(regs, SRF_ALL); - writew(®s->irq_signal, 0); - writew(®s->irq_enable, 0x01ff); - writew(®s->irq_status, readw(®s->irq_status)); - writew(®s->error_signal, 0); - writew(®s->error_irq_enable, 0x01ff); - writew(®s->error_irq_status, readw(®s->error_irq_status)); - writeb(®s->timeout_control, 0x0e); // Set to max timeout - int volt = sdcard_set_power(regs); - if (volt < 0) - return; - - // Initialize card - struct sddrive_s *drive = malloc_fseg(sizeof(*drive)); - if (!drive) { - warn_noalloc(); - goto fail; - } - memset(drive, 0, sizeof(*drive)); - drive->drive.type = DTYPE_SDCARD; - drive->regs = regs; - int ret = sdcard_card_setup(drive, volt, prio); - if (ret) { - free(drive); - goto fail; - } - return; -fail: - writeb(®s->power_control, 0); - writew(®s->clock_control, 0); -} - -static void -sdcard_pci_setup(void *data) -{ - struct pci_device *pci = data; - // XXX - bars dependent on slot index register in pci config space - struct sdhci_s *regs = pci_enable_membar(pci, PCI_BASE_ADDRESS_0); - if (!regs) - return; - int prio = bootprio_find_pci_device(pci); - sdcard_controller_setup(regs, prio); -} - -static void -sdcard_romfile_setup(void *data) -{ - struct romfile_s *file = data; - int prio = bootprio_find_named_rom(file->name, 0); - u32 addr = romfile_loadint(file->name, 0); - dprintf(1, "Starting sdcard controller check at addr %x\n", addr); - sdcard_controller_setup((void*)addr, prio); -} - -void -sdcard_setup(void) -{ - if (!CONFIG_SDCARD) - return; - - struct romfile_s *file = NULL; - int num_romfiles = 0; - for (;;) { - file = romfile_findprefix("etc/sdcard", file); - if (!file) - break; - run_thread(sdcard_romfile_setup, file); - num_romfiles++; - } - if (num_romfiles) - // only scan for PCI controllers if etc/sdcard not used - return; - - struct pci_device *pci; - foreachpci(pci) { - if (pci->class != PCI_CLASS_SYSTEM_SDHCI || pci->prog_if >= 2) - // Not an SDHCI controller following SDHCI spec - continue; - run_thread(sdcard_pci_setup, pci); - } -} diff --git a/payloads/external/SeaBIOS/src/hw/serialio.c b/payloads/external/SeaBIOS/src/hw/serialio.c deleted file mode 100644 index fa663b99..00000000 --- a/payloads/external/SeaBIOS/src/hw/serialio.c +++ /dev/null @@ -1,129 +0,0 @@ -// Low-level serial (and serial-like) device access. -// -// Copyright (C) 2008-1013 Kevin O'Connor <kevin@koconnor.net> -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "config.h" // CONFIG_DEBUG_SERIAL -#include "fw/paravirt.h" // RunningOnQEMU -#include "output.h" // dprintf -#include "serialio.h" // serial_debug_preinit -#include "x86.h" // outb - - -/**************************************************************** - * Serial port debug output - ****************************************************************/ - -#define DEBUG_TIMEOUT 100000 - -// Write to a serial port register -static void -serial_debug_write(u8 offset, u8 val) -{ - if (CONFIG_DEBUG_SERIAL) { - outb(val, CONFIG_DEBUG_SERIAL_PORT + offset); - } else if (CONFIG_DEBUG_SERIAL_MMIO) { - ASSERT32FLAT(); - writeb((void*)CONFIG_DEBUG_SERIAL_MEM_ADDRESS + 4*offset, val); - } -} - -// Read from a serial port register -static u8 -serial_debug_read(u8 offset) -{ - if (CONFIG_DEBUG_SERIAL) - return inb(CONFIG_DEBUG_SERIAL_PORT + offset); - if (CONFIG_DEBUG_SERIAL_MMIO) { - ASSERT32FLAT(); - return readb((void*)CONFIG_DEBUG_SERIAL_MEM_ADDRESS + 4*offset); - } -} - -// Setup the debug serial port for output. -void -serial_debug_preinit(void) -{ - if (!CONFIG_DEBUG_SERIAL && (!CONFIG_DEBUG_SERIAL_MMIO || MODESEGMENT)) - return; - // setup for serial logging: 8N1 - u8 oldparam, newparam = 0x03; - oldparam = serial_debug_read(SEROFF_LCR); - serial_debug_write(SEROFF_LCR, newparam); - // Disable irqs - u8 oldier, newier = 0; - oldier = serial_debug_read(SEROFF_IER); - serial_debug_write(SEROFF_IER, newier); - - if (oldparam != newparam || oldier != newier) - dprintf(1, "Changing serial settings was %x/%x now %x/%x\n" - , oldparam, oldier, newparam, newier); -} - -// Write a character to the serial port. -static void -serial_debug(char c) -{ - if (!CONFIG_DEBUG_SERIAL && (!CONFIG_DEBUG_SERIAL_MMIO || MODESEGMENT)) - return; - int timeout = DEBUG_TIMEOUT; - while ((serial_debug_read(SEROFF_LSR) & 0x20) != 0x20) - if (!timeout--) - // Ran out of time. - return; - serial_debug_write(SEROFF_DATA, c); -} - -void -serial_debug_putc(char c) -{ - if (c == '\n') - serial_debug('\r'); - serial_debug(c); -} - -// Make sure all serial port writes have been completely sent. -void -serial_debug_flush(void) -{ - if (!CONFIG_DEBUG_SERIAL && (!CONFIG_DEBUG_SERIAL_MMIO || MODESEGMENT)) - return; - int timeout = DEBUG_TIMEOUT; - while ((serial_debug_read(SEROFF_LSR) & 0x60) != 0x60) - if (!timeout--) - // Ran out of time. - return; -} - - -/**************************************************************** - * QEMU debug port - ****************************************************************/ - -u16 DebugOutputPort VARFSEG = 0x402; - -void -qemu_debug_preinit(void) -{ - /* Xen doesn't support checking if debug output is active. */ - if (runningOnXen()) - return; - - /* Check if the QEMU debug output port is active */ - if (CONFIG_DEBUG_IO && - inb(GET_GLOBAL(DebugOutputPort)) != QEMU_DEBUGCON_READBACK) - DebugOutputPort = 0; -} - -// Write a character to the special debugging port. -void -qemu_debug_putc(char c) -{ - if (!CONFIG_DEBUG_IO || !runningOnQEMU()) - return; - u16 port = GET_GLOBAL(DebugOutputPort); - if (port) - // Send character to debug port. - outb(c, port); -} diff --git a/payloads/external/SeaBIOS/src/hw/serialio.h b/payloads/external/SeaBIOS/src/hw/serialio.h deleted file mode 100644 index 81fed306..00000000 --- a/payloads/external/SeaBIOS/src/hw/serialio.h +++ /dev/null @@ -1,30 +0,0 @@ -#ifndef __SERIALIO_H -#define __SERIALIO_H - -#include "types.h" // u16 - -#define PORT_LPT2 0x0278 -#define PORT_SERIAL4 0x02e8 -#define PORT_SERIAL2 0x02f8 -#define PORT_LPT1 0x0378 -#define PORT_SERIAL3 0x03e8 -#define PORT_SERIAL1 0x03f8 - -// Serial port offsets -#define SEROFF_DATA 0 -#define SEROFF_DLL 0 -#define SEROFF_IER 1 -#define SEROFF_DLH 1 -#define SEROFF_IIR 2 -#define SEROFF_LCR 3 -#define SEROFF_LSR 5 -#define SEROFF_MSR 6 - -void serial_debug_preinit(void); -void serial_debug_putc(char c); -void serial_debug_flush(void); -extern u16 DebugOutputPort; -void qemu_debug_preinit(void); -void qemu_debug_putc(char c); - -#endif // serialio.h diff --git a/payloads/external/SeaBIOS/src/hw/timer.c b/payloads/external/SeaBIOS/src/hw/timer.c deleted file mode 100644 index b6f102e3..00000000 --- a/payloads/external/SeaBIOS/src/hw/timer.c +++ /dev/null @@ -1,283 +0,0 @@ -// Internal timer and Intel 8253 Programmable Interrupt Timer (PIT) support. -// -// Copyright (C) 2008-2013 Kevin O'Connor <kevin@koconnor.net> -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "biosvar.h" // GET_LOW -#include "config.h" // CONFIG_* -#include "output.h" // dprintf -#include "stacks.h" // yield -#include "util.h" // timer_setup -#include "x86.h" // cpuid - -#define PORT_PIT_COUNTER0 0x0040 -#define PORT_PIT_COUNTER1 0x0041 -#define PORT_PIT_COUNTER2 0x0042 -#define PORT_PIT_MODE 0x0043 -#define PORT_PS2_CTRLB 0x0061 - -// Bits for PORT_PIT_MODE -#define PM_SEL_TIMER0 (0<<6) -#define PM_SEL_TIMER1 (1<<6) -#define PM_SEL_TIMER2 (2<<6) -#define PM_SEL_READBACK (3<<6) -#define PM_ACCESS_LATCH (0<<4) -#define PM_ACCESS_LOBYTE (1<<4) -#define PM_ACCESS_HIBYTE (2<<4) -#define PM_ACCESS_WORD (3<<4) -#define PM_MODE0 (0<<1) -#define PM_MODE1 (1<<1) -#define PM_MODE2 (2<<1) -#define PM_MODE3 (3<<1) -#define PM_MODE4 (4<<1) -#define PM_MODE5 (5<<1) -#define PM_CNT_BINARY (0<<0) -#define PM_CNT_BCD (1<<0) -#define PM_READ_COUNTER0 (1<<1) -#define PM_READ_COUNTER1 (1<<2) -#define PM_READ_COUNTER2 (1<<3) -#define PM_READ_STATUSVALUE (0<<4) -#define PM_READ_VALUE (1<<4) -#define PM_READ_STATUS (2<<4) - -// Bits for PORT_PS2_CTRLB -#define PPCB_T2GATE (1<<0) -#define PPCB_SPKR (1<<1) -#define PPCB_T2OUT (1<<5) - -#define PMTIMER_HZ 3579545 // Underlying Hz of the PM Timer -#define PMTIMER_TO_PIT 3 // Ratio of pmtimer rate to pit rate - -u32 TimerKHz VARFSEG = DIV_ROUND_UP(PMTIMER_HZ, 1000 * PMTIMER_TO_PIT); -u16 TimerPort VARFSEG = PORT_PIT_COUNTER0; -u8 ShiftTSC VARFSEG; - - -/**************************************************************** - * Internal timer setup - ****************************************************************/ - -#define CALIBRATE_COUNT 0x800 // Approx 1.7ms - -// Calibrate the CPU time-stamp-counter -static void -tsctimer_setup(void) -{ - // Setup "timer2" - u8 orig = inb(PORT_PS2_CTRLB); - outb((orig & ~PPCB_SPKR) | PPCB_T2GATE, PORT_PS2_CTRLB); - /* binary, mode 0, LSB/MSB, Ch 2 */ - outb(PM_SEL_TIMER2|PM_ACCESS_WORD|PM_MODE0|PM_CNT_BINARY, PORT_PIT_MODE); - /* LSB of ticks */ - outb(CALIBRATE_COUNT & 0xFF, PORT_PIT_COUNTER2); - /* MSB of ticks */ - outb(CALIBRATE_COUNT >> 8, PORT_PIT_COUNTER2); - - u64 start = rdtscll(); - while ((inb(PORT_PS2_CTRLB) & PPCB_T2OUT) == 0) - ; - u64 end = rdtscll(); - - // Restore PORT_PS2_CTRLB - outb(orig, PORT_PS2_CTRLB); - - // Store calibrated cpu khz. - u64 diff = end - start; - dprintf(6, "tsc calibrate start=%u end=%u diff=%u\n" - , (u32)start, (u32)end, (u32)diff); - u64 t = DIV_ROUND_UP(diff * PMTIMER_HZ, CALIBRATE_COUNT); - while (t >= (1<<24)) { - ShiftTSC++; - t = (t + 1) >> 1; - } - TimerKHz = DIV_ROUND_UP((u32)t, 1000 * PMTIMER_TO_PIT); - TimerPort = 0; - - dprintf(1, "CPU Mhz=%u\n", (TimerKHz << ShiftTSC) / 1000); -} - -// Setup internal timers. -void -timer_setup(void) -{ - if (!CONFIG_TSC_TIMER) - return; - if (TimerPort != PORT_PIT_COUNTER0) - return; // have timer already - - // Check if CPU has a timestamp counter - u32 eax, ebx, ecx, edx, cpuid_features = 0; - cpuid(0, &eax, &ebx, &ecx, &edx); - if (eax > 0) - cpuid(1, &eax, &ebx, &ecx, &cpuid_features); - if (cpuid_features & CPUID_TSC) - tsctimer_setup(); -} - -void -tsctimer_setfreq(u32 khz, const char *src) -{ - if (!CONFIG_TSC_TIMER) - return; - if (TimerPort != PORT_PIT_COUNTER0) - return; // have timer already - - TimerKHz = khz; - ShiftTSC = 0; - while (TimerKHz >= 6000) { - ShiftTSC++; - TimerKHz = (TimerKHz + 1) >> 1; - } - TimerPort = 0; - - dprintf(1, "CPU Mhz=%u (%s)\n", (TimerKHz << ShiftTSC) / 1000, src); -} - -void -pmtimer_setup(u16 ioport) -{ - if (!CONFIG_PMTIMER) - return; - if (TimerPort != PORT_PIT_COUNTER0) - return; // have timer already - - dprintf(1, "Using pmtimer, ioport 0x%x\n", ioport); - TimerPort = ioport; - TimerKHz = DIV_ROUND_UP(PMTIMER_HZ, 1000); -} - - -/**************************************************************** - * Internal timer reading - ****************************************************************/ - -u32 TimerLast VARLOW; - -// Add extra high bits to timers that have less than 32bits of precision. -static u32 -timer_adjust_bits(u32 value, u32 validbits) -{ - u32 last = GET_LOW(TimerLast); - value = (last & ~validbits) | (value & validbits); - if (value < last) - value += validbits + 1; - SET_LOW(TimerLast, value); - return value; -} - -// Sample the current timer value. -static u32 -timer_read(void) -{ - u16 port = GET_GLOBAL(TimerPort); - if (CONFIG_TSC_TIMER && !port) - // Read from CPU TSC - return rdtscll() >> GET_GLOBAL(ShiftTSC); - if (CONFIG_PMTIMER && port != PORT_PIT_COUNTER0) - // Read from PMTIMER - return timer_adjust_bits(inl(port), 0xffffff); - // Read from PIT. - outb(PM_SEL_READBACK | PM_READ_VALUE | PM_READ_COUNTER0, PORT_PIT_MODE); - u16 v = inb(PORT_PIT_COUNTER0) | (inb(PORT_PIT_COUNTER0) << 8); - return timer_adjust_bits(-v, 0xffff); -} - -// Return the TSC value that is 'msecs' time in the future. -u32 -timer_calc(u32 msecs) -{ - return timer_read() + (GET_GLOBAL(TimerKHz) * msecs); -} -u32 -timer_calc_usec(u32 usecs) -{ - u32 cur = timer_read(), khz = GET_GLOBAL(TimerKHz); - if (usecs > 500000) - return cur + DIV_ROUND_UP(usecs, 1000) * khz; - return cur + DIV_ROUND_UP(usecs * khz, 1000); -} -static u32 -timer_calc_nsec(u32 nsecs) -{ - u32 cur = timer_read(), khz = GET_GLOBAL(TimerKHz); - if (nsecs > 500000) - return cur + DIV_ROUND_UP(nsecs, 1000000) * khz; - return cur + DIV_ROUND_UP(nsecs * khz, 1000000); -} - -// Check if the current time is past a previously calculated end time. -int -timer_check(u32 end) -{ - return (s32)(timer_read() - end) > 0; -} - -static void -timer_delay(u32 end) -{ - while (!timer_check(end)) - cpu_relax(); -} - -static void -timer_sleep(u32 end) -{ - while (!timer_check(end)) - yield(); -} - -void ndelay(u32 count) { - timer_delay(timer_calc_nsec(count)); -} -void udelay(u32 count) { - timer_delay(timer_calc_usec(count)); -} -void mdelay(u32 count) { - timer_delay(timer_calc(count)); -} - -void nsleep(u32 count) { - timer_sleep(timer_calc_nsec(count)); -} -void usleep(u32 count) { - timer_sleep(timer_calc_usec(count)); -} -void msleep(u32 count) { - timer_sleep(timer_calc(count)); -} - - -/**************************************************************** - * PIT setup - ****************************************************************/ - -#define PIT_TICK_INTERVAL 65536 // Default interval for 18.2Hz timer - -// Return the number of milliseconds in 'ticks' number of timer irqs. -u32 -ticks_to_ms(u32 ticks) -{ - u32 t = PIT_TICK_INTERVAL * 1000 * PMTIMER_TO_PIT * ticks; - return DIV_ROUND_UP(t, PMTIMER_HZ); -} - -// Return the number of timer irqs in 'ms' number of milliseconds. -u32 -ticks_from_ms(u32 ms) -{ - u32 t = DIV_ROUND_UP((u64)ms * PMTIMER_HZ, PIT_TICK_INTERVAL); - return DIV_ROUND_UP(t, 1000 * PMTIMER_TO_PIT); -} - -void -pit_setup(void) -{ - if (!CONFIG_HARDWARE_IRQ) - return; - // timer0: binary count, 16bit count, mode 2 - outb(PM_SEL_TIMER0|PM_ACCESS_WORD|PM_MODE2|PM_CNT_BINARY, PORT_PIT_MODE); - // maximum count of 0000H = 18.2Hz - outb(0x0, PORT_PIT_COUNTER0); - outb(0x0, PORT_PIT_COUNTER0); -} diff --git a/payloads/external/SeaBIOS/src/hw/tpm_drivers.c b/payloads/external/SeaBIOS/src/hw/tpm_drivers.c deleted file mode 100644 index 2b5753c1..00000000 --- a/payloads/external/SeaBIOS/src/hw/tpm_drivers.c +++ /dev/null @@ -1,637 +0,0 @@ -// Implementation of a TPM driver for the TPM TIS interface -// -// Copyright (C) 2006-2011 IBM Corporation -// -// Authors: -// Stefan Berger <stefanb@linux.vnet.ibm.com> -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "byteorder.h" // be32_to_cpu -#include "config.h" // CONFIG_TPM_TIS_SHA1THRESHOLD -#include "hw/tpm_drivers.h" // struct tpm_driver -#include "std/tcg.h" // TCG_RESPONSE_TIMEOUT -#include "output.h" // warn_timeout -#include "stacks.h" // yield -#include "string.h" // memcpy -#include "util.h" // timer_calc_usec -#include "x86.h" // readl - -/* low level driver implementation */ -struct tpm_driver { - u32 *timeouts; - u32 *durations; - void (*set_timeouts)(u32 timeouts[4], u32 durations[3]); - u32 (*probe)(void); - TPMVersion (*get_tpm_version)(void); - u32 (*init)(void); - u32 (*activate)(u8 locty); - u32 (*ready)(void); - u32 (*senddata)(const u8 *const data, u32 len); - u32 (*readresp)(u8 *buffer, u32 *len); - u32 (*waitdatavalid)(void); - u32 (*waitrespready)(enum tpmDurationType to_t); -}; - -extern struct tpm_driver tpm_drivers[]; - -#define TIS_DRIVER_IDX 0 -#define CRB_DRIVER_IDX 1 -#define TPM_NUM_DRIVERS 2 - -#define TPM_INVALID_DRIVER 0xf - -static const u32 tis_default_timeouts[4] = { - TIS_DEFAULT_TIMEOUT_A, - TIS_DEFAULT_TIMEOUT_B, - TIS_DEFAULT_TIMEOUT_C, - TIS_DEFAULT_TIMEOUT_D, -}; - -static const u32 tpm_default_durations[3] = { - TPM_DEFAULT_DURATION_SHORT, - TPM_DEFAULT_DURATION_MEDIUM, - TPM_DEFAULT_DURATION_LONG, -}; - -/* determined values */ -static u32 tpm_default_dur[3]; -static u32 tpm_default_to[4]; - -static u32 crb_cmd_size; -static void *crb_cmd; -static u32 crb_resp_size; -static void *crb_resp; - -static u32 wait_reg8(u8* reg, u32 time, u8 mask, u8 expect) -{ - if (!CONFIG_TCGBIOS) - return 0; - - u32 rc = 1; - u32 end = timer_calc_usec(time); - - for (;;) { - u8 value = readl(reg); - if ((value & mask) == expect) { - rc = 0; - break; - } - if (timer_check(end)) { - warn_timeout(); - break; - } - yield(); - } - return rc; -} - -static u32 tis_wait_access(u8 locty, u32 time, u8 mask, u8 expect) -{ - return wait_reg8(TIS_REG(locty, TIS_REG_ACCESS), time, mask, expect); -} - -static u32 tis_wait_sts(u8 locty, u32 time, u8 mask, u8 expect) -{ - return wait_reg8(TIS_REG(locty, TIS_REG_STS), time, mask, expect); -} - -static u32 crb_wait_reg(u8 locty, u16 reg, u32 time, u8 mask, u8 expect) -{ - return wait_reg8(CRB_REG(locty, reg), time, mask, expect); -} - -/* if device is not there, return '0', '1' otherwise */ -static u32 tis_probe(void) -{ - if (!CONFIG_TCGBIOS) - return 0; - - /* Wait for the interface to report it's ready */ - u32 rc = tis_wait_access(0, TIS_DEFAULT_TIMEOUT_A, - TIS_ACCESS_TPM_REG_VALID_STS, - TIS_ACCESS_TPM_REG_VALID_STS); - if (rc) - return 0; - - u32 didvid = readl(TIS_REG(0, TIS_REG_DID_VID)); - - if ((didvid != 0) && (didvid != 0xffffffff)) - rc = 1; - - /* TPM 2 has an interface register */ - u32 ifaceid = readl(TIS_REG(0, TIS_REG_IFACE_ID)); - - if ((ifaceid & 0xf) != 0xf) { - if ((ifaceid & 0xf) == 1) { - /* CRB is active; no TIS */ - return 0; - } - if ((ifaceid & (1 << 13)) == 0) { - /* TIS cannot be selected */ - return 0; - } - /* write of 0 to bits 17-18 selects TIS */ - writel(TIS_REG(0, TIS_REG_IFACE_ID), 0); - /* since we only support TIS, we lock it */ - writel(TIS_REG(0, TIS_REG_IFACE_ID), (1 << 19)); - } - - return rc; -} - -static TPMVersion tis_get_tpm_version(void) -{ - u32 reg = readl(TIS_REG(0, TIS_REG_IFACE_ID)); - - /* - * FIFO interface as defined in TIS1.3 is active - * Interface capabilities are defined in TIS_REG_INTF_CAPABILITY - */ - if ((reg & 0xf) == 0xf) { - reg = readl(TIS_REG(0, TIS_REG_INTF_CAPABILITY)); - /* Interface 1.3 for TPM 2.0 */ - if (((reg >> 28) & 0x7) == 3) - return TPM_VERSION_2; - } - /* FIFO interface as defined in PTP for TPM 2.0 is active */ - else if ((reg & 0xf) == 0) { - return TPM_VERSION_2; - } - - return TPM_VERSION_1_2; -} - -static void init_timeout(int driver) -{ - if (tpm_drivers[driver].durations == NULL) { - u32 *durations = tpm_default_dur; - memcpy(durations, tpm_default_durations, - sizeof(tpm_default_durations)); - tpm_drivers[driver].durations = durations; - } - - if (tpm_drivers[driver].timeouts == NULL) { - u32 *timeouts = tpm_default_to; - memcpy(timeouts, tis_default_timeouts, - sizeof(tis_default_timeouts)); - tpm_drivers[driver].timeouts = timeouts; - } -} - -static u32 tis_init(void) -{ - if (!CONFIG_TCGBIOS) - return 1; - - writeb(TIS_REG(0, TIS_REG_INT_ENABLE), 0); - - init_timeout(TIS_DRIVER_IDX); - - return 1; -} - - -static void set_timeouts(u32 timeouts[4], u32 durations[3]) -{ - if (!CONFIG_TCGBIOS) - return; - - u32 *tos = tpm_drivers[TIS_DRIVER_IDX].timeouts; - u32 *dus = tpm_drivers[TIS_DRIVER_IDX].durations; - - if (tos && tos != tis_default_timeouts && timeouts) - memcpy(tos, timeouts, 4 * sizeof(u32)); - if (dus && dus != tpm_default_durations && durations) - memcpy(dus, durations, 3 * sizeof(u32)); -} - -static u32 tis_activate(u8 locty) -{ - if (!CONFIG_TCGBIOS) - return 0; - - u32 rc = 0; - u8 acc; - int l; - u32 timeout_a = tpm_drivers[TIS_DRIVER_IDX].timeouts[TIS_TIMEOUT_TYPE_A]; - - if (!(readb(TIS_REG(locty, TIS_REG_ACCESS)) & - TIS_ACCESS_ACTIVE_LOCALITY)) { - /* release locality in use top-downwards */ - for (l = 4; l >= 0; l--) - writeb(TIS_REG(l, TIS_REG_ACCESS), - TIS_ACCESS_ACTIVE_LOCALITY); - } - - /* request access to locality */ - writeb(TIS_REG(locty, TIS_REG_ACCESS), TIS_ACCESS_REQUEST_USE); - - acc = readb(TIS_REG(locty, TIS_REG_ACCESS)); - if ((acc & TIS_ACCESS_ACTIVE_LOCALITY)) { - writeb(TIS_REG(locty, TIS_REG_STS), TIS_STS_COMMAND_READY); - rc = tis_wait_sts(locty, timeout_a, - TIS_STS_COMMAND_READY, TIS_STS_COMMAND_READY); - } - - return rc; -} - -static u32 tis_find_active_locality(void) -{ - if (!CONFIG_TCGBIOS) - return 0; - - u8 locty; - - for (locty = 0; locty <= 4; locty++) { - if ((readb(TIS_REG(locty, TIS_REG_ACCESS)) & - TIS_ACCESS_ACTIVE_LOCALITY)) - return locty; - } - - tis_activate(0); - - return 0; -} - -static u32 tis_ready(void) -{ - if (!CONFIG_TCGBIOS) - return 0; - - u32 rc = 0; - u8 locty = tis_find_active_locality(); - u32 timeout_b = tpm_drivers[TIS_DRIVER_IDX].timeouts[TIS_TIMEOUT_TYPE_B]; - - writeb(TIS_REG(locty, TIS_REG_STS), TIS_STS_COMMAND_READY); - rc = tis_wait_sts(locty, timeout_b, - TIS_STS_COMMAND_READY, TIS_STS_COMMAND_READY); - - return rc; -} - -static u32 tis_senddata(const u8 *const data, u32 len) -{ - if (!CONFIG_TCGBIOS) - return 0; - - u32 rc = 0; - u32 offset = 0; - u32 end_loop = 0; - u16 burst = 0; - u8 locty = tis_find_active_locality(); - u32 timeout_d = tpm_drivers[TIS_DRIVER_IDX].timeouts[TIS_TIMEOUT_TYPE_D]; - u32 end = timer_calc_usec(timeout_d); - - do { - while (burst == 0) { - burst = readl(TIS_REG(locty, TIS_REG_STS)) >> 8; - if (burst == 0) { - if (timer_check(end)) { - warn_timeout(); - break; - } - yield(); - } - } - - if (burst == 0) { - rc = TCG_RESPONSE_TIMEOUT; - break; - } - - while (1) { - writeb(TIS_REG(locty, TIS_REG_DATA_FIFO), data[offset++]); - burst--; - - if (burst == 0 || offset == len) - break; - } - - if (offset == len) - end_loop = 1; - } while (end_loop == 0); - - return rc; -} - -static u32 tis_readresp(u8 *buffer, u32 *len) -{ - if (!CONFIG_TCGBIOS) - return 0; - - u32 rc = 0; - u32 offset = 0; - u32 sts; - u8 locty = tis_find_active_locality(); - - while (offset < *len) { - buffer[offset] = readb(TIS_REG(locty, TIS_REG_DATA_FIFO)); - offset++; - sts = readb(TIS_REG(locty, TIS_REG_STS)); - /* data left ? */ - if ((sts & TIS_STS_DATA_AVAILABLE) == 0) - break; - } - - *len = offset; - - return rc; -} - - -static u32 tis_waitdatavalid(void) -{ - if (!CONFIG_TCGBIOS) - return 0; - - u32 rc = 0; - u8 locty = tis_find_active_locality(); - u32 timeout_c = tpm_drivers[TIS_DRIVER_IDX].timeouts[TIS_TIMEOUT_TYPE_C]; - - if (tis_wait_sts(locty, timeout_c, TIS_STS_VALID, TIS_STS_VALID) != 0) - rc = 1; - - return rc; -} - -static u32 tis_waitrespready(enum tpmDurationType to_t) -{ - if (!CONFIG_TCGBIOS) - return 0; - - u32 rc = 0; - u8 locty = tis_find_active_locality(); - u32 timeout = tpm_drivers[TIS_DRIVER_IDX].durations[to_t]; - - writeb(TIS_REG(locty ,TIS_REG_STS), TIS_STS_TPM_GO); - - if (tis_wait_sts(locty, timeout, - TIS_STS_DATA_AVAILABLE, TIS_STS_DATA_AVAILABLE) != 0) - rc = 1; - - return rc; -} - -#define CRB_STATE_VALID_STS 0b10000000 -#define CRB_STATE_LOC_ASSIGNED 0x00000010 -#define CRB_STATE_READY_MASK (CRB_STATE_VALID_STS | CRB_STATE_LOC_ASSIGNED) - -/* if device is not there, return '0', '1' otherwise */ -static u32 crb_probe(void) -{ - if (!CONFIG_TCGBIOS) - return 0; - - /* Wait for the interface to report it's ready */ - u32 rc = crb_wait_reg(0, CRB_REG_LOC_STATE, TIS2_DEFAULT_TIMEOUT_D, - CRB_STATE_READY_MASK, CRB_STATE_VALID_STS); - if (rc) - return 0; - - u32 ifaceid = readl(CRB_REG(0, CRB_REG_INTF_ID)); - - if ((ifaceid & 0xf) != 0xf) { - if ((ifaceid & 0xf) == 1) { - /* CRB is active */ - } else if ((ifaceid & (1 << 14)) == 0) { - /* CRB cannot be selected */ - return 0; - } - /* write of 1 to bits 17-18 selects CRB */ - writel(CRB_REG(0, CRB_REG_INTF_ID), (1 << 17)); - /* lock it */ - writel(CRB_REG(0, CRB_REG_INTF_ID), (1 << 19)); - } - - /* no support for 64 bit addressing yet */ - if (readl(CRB_REG(0, CRB_REG_CTRL_CMD_HADDR))) - return 0; - - u64 addr = readq(CRB_REG(0, CRB_REG_CTRL_RSP_ADDR)); - if (addr > 0xffffffff) - return 0; - - return 1; -} - -static TPMVersion crb_get_tpm_version(void) -{ - /* CRB is supposed to be TPM 2.0 only */ - return TPM_VERSION_2; -} - -static u32 crb_init(void) -{ - if (!CONFIG_TCGBIOS) - return 1; - - crb_cmd = (void*)readl(CRB_REG(0, CRB_REG_CTRL_CMD_LADDR)); - crb_cmd_size = readl(CRB_REG(0, CRB_REG_CTRL_CMD_SIZE)); - crb_resp = (void*)readl(CRB_REG(0, CRB_REG_CTRL_RSP_ADDR)); - crb_resp_size = readl(CRB_REG(0, CRB_REG_CTRL_RSP_SIZE)); - - init_timeout(CRB_DRIVER_IDX); - - return 0; -} - -static u32 crb_activate(u8 locty) -{ - if (!CONFIG_TCGBIOS) - return 0; - - writeb(CRB_REG(locty, CRB_REG_LOC_CTRL), 1); - - return 0; -} - -static u32 crb_find_active_locality(void) -{ - if (!CONFIG_TCGBIOS) - return 0; - - return 0; -} - -#define CRB_CTRL_REQ_CMD_READY 0b1 -#define CRB_START_INVOKE 0b1 -#define CRB_CTRL_STS_ERROR 0b1 - -static u32 crb_ready(void) -{ - if (!CONFIG_TCGBIOS) - return 0; - - u32 rc = 0; - u8 locty = crb_find_active_locality(); - u32 timeout_c = tpm_drivers[CRB_DRIVER_IDX].timeouts[TIS_TIMEOUT_TYPE_C]; - - writel(CRB_REG(locty, CRB_REG_CTRL_REQ), CRB_CTRL_REQ_CMD_READY); - rc = crb_wait_reg(locty, CRB_REG_CTRL_REQ, timeout_c, - CRB_CTRL_REQ_CMD_READY, 0); - - return rc; -} - -static u32 crb_senddata(const u8 *const data, u32 len) -{ - if (!CONFIG_TCGBIOS) - return 0; - - if (len > crb_cmd_size) - return 1; - - u8 locty = crb_find_active_locality(); - memcpy(crb_cmd, data, len); - writel(CRB_REG(locty, CRB_REG_CTRL_START), CRB_START_INVOKE); - - return 0; -} - -static u32 crb_readresp(u8 *buffer, u32 *len) -{ - if (!CONFIG_TCGBIOS) - return 0; - - u8 locty = crb_find_active_locality(); - if (readl(CRB_REG(locty, CRB_REG_CTRL_STS)) & CRB_CTRL_STS_ERROR) - return 1; - - if (*len < 6) - return 1; - - memcpy(buffer, crb_resp, 6); - u32 expected = be32_to_cpu(*(u32 *) &buffer[2]); - if (expected < 6) - return 1; - - *len = (*len < expected) ? *len : expected; - - memcpy(buffer + 6, crb_resp + 6, *len - 6); - - return 0; -} - - -static u32 crb_waitdatavalid(void) -{ - return 0; -} - -static u32 crb_waitrespready(enum tpmDurationType to_t) -{ - if (!CONFIG_TCGBIOS) - return 0; - - u32 rc = 0; - u8 locty = crb_find_active_locality(); - u32 timeout = tpm_drivers[CRB_DRIVER_IDX].durations[to_t]; - - rc = crb_wait_reg(locty, CRB_REG_CTRL_START, timeout, - CRB_START_INVOKE, 0); - - return rc; -} - -struct tpm_driver tpm_drivers[TPM_NUM_DRIVERS] = { - [TIS_DRIVER_IDX] = - { - .timeouts = NULL, - .durations = NULL, - .set_timeouts = set_timeouts, - .probe = tis_probe, - .get_tpm_version = tis_get_tpm_version, - .init = tis_init, - .activate = tis_activate, - .ready = tis_ready, - .senddata = tis_senddata, - .readresp = tis_readresp, - .waitdatavalid = tis_waitdatavalid, - .waitrespready = tis_waitrespready, - }, - [CRB_DRIVER_IDX] = - { - .timeouts = NULL, - .durations = NULL, - .set_timeouts = set_timeouts, - .probe = crb_probe, - .get_tpm_version = crb_get_tpm_version, - .init = crb_init, - .activate = crb_activate, - .ready = crb_ready, - .senddata = crb_senddata, - .readresp = crb_readresp, - .waitdatavalid = crb_waitdatavalid, - .waitrespready = crb_waitrespready, - }, -}; - -static u8 TPMHW_driver_to_use = TPM_INVALID_DRIVER; - -TPMVersion -tpmhw_probe(void) -{ - unsigned int i; - for (i = 0; i < TPM_NUM_DRIVERS; i++) { - struct tpm_driver *td = &tpm_drivers[i]; - if (td->probe() != 0) { - td->init(); - TPMHW_driver_to_use = i; - return td->get_tpm_version(); - } - } - return TPM_VERSION_NONE; -} - -int -tpmhw_is_present(void) -{ - return TPMHW_driver_to_use != TPM_INVALID_DRIVER; -} - -int -tpmhw_transmit(u8 locty, struct tpm_req_header *req, - void *respbuffer, u32 *respbufferlen, - enum tpmDurationType to_t) -{ - if (TPMHW_driver_to_use == TPM_INVALID_DRIVER) - return -1; - - struct tpm_driver *td = &tpm_drivers[TPMHW_driver_to_use]; - - u32 irc = td->activate(locty); - if (irc != 0) { - /* tpm could not be activated */ - return -1; - } - - irc = td->senddata((void*)req, be32_to_cpu(req->totlen)); - if (irc != 0) - return -1; - - irc = td->waitdatavalid(); - if (irc != 0) - return -1; - - irc = td->waitrespready(to_t); - if (irc != 0) - return -1; - - irc = td->readresp(respbuffer, respbufferlen); - if (irc != 0 || - *respbufferlen < sizeof(struct tpm_rsp_header)) - return -1; - - td->ready(); - - return 0; -} - -void -tpmhw_set_timeouts(u32 timeouts[4], u32 durations[3]) -{ - struct tpm_driver *td = &tpm_drivers[TPMHW_driver_to_use]; - td->set_timeouts(timeouts, durations); -} diff --git a/payloads/external/SeaBIOS/src/hw/tpm_drivers.h b/payloads/external/SeaBIOS/src/hw/tpm_drivers.h deleted file mode 100644 index adf18396..00000000 --- a/payloads/external/SeaBIOS/src/hw/tpm_drivers.h +++ /dev/null @@ -1,127 +0,0 @@ -#ifndef TPM_DRIVERS_H -#define TPM_DRIVERS_H - -#include "types.h" // u32 - - -enum tpmDurationType { - TPM_DURATION_TYPE_SHORT = 0, - TPM_DURATION_TYPE_MEDIUM, - TPM_DURATION_TYPE_LONG, -}; - -typedef u8 TPMVersion; - -#define TPM_VERSION_NONE 0 -#define TPM_VERSION_1_2 1 -#define TPM_VERSION_2 2 - -TPMVersion tpmhw_probe(void); -int tpmhw_is_present(void); -struct tpm_req_header; -int tpmhw_transmit(u8 locty, struct tpm_req_header *req, - void *respbuffer, u32 *respbufferlen, - enum tpmDurationType to_t); -void tpmhw_set_timeouts(u32 timeouts[4], u32 durations[3]); - -/* CRB driver */ -/* address of locality 0 (CRB) */ -#define TPM_CRB_BASE_ADDRESS 0xfed40000 - -#define CRB_REG(LOCTY, REG) \ - (void *)(TPM_CRB_BASE_ADDRESS + (LOCTY << 12) + REG) - -/* hardware registers */ -#define CRB_REG_LOC_STATE 0x0 -#define CRB_REG_LOC_CTRL 0x8 -#define CRB_REG_LOC_STS 0xC -#define CRB_REG_INTF_ID 0x30 -#define CRB_REG_CTRL_EXT 0x38 -#define CRB_REG_CTRL_REQ 0x40 -#define CRB_REG_CTRL_STS 0x44 -#define CRB_REG_CTRL_CANCEL 0x48 -#define CRB_REG_CTRL_START 0x4C -#define CRB_REG_INT_ENABLE 0x50 -#define CRB_REG_INT_STS 0x54 -#define CRB_REG_CTRL_CMD_SIZE 0x58 -#define CRB_REG_CTRL_CMD_LADDR 0x5C -#define CRB_REG_CTRL_CMD_HADDR 0x60 -#define CRB_REG_CTRL_RSP_SIZE 0x64 -#define CRB_REG_CTRL_RSP_ADDR 0x68 -#define CRB_REG_DATA_BUFFER 0x80 - -/* TIS driver */ -/* address of locality 0 (TIS) */ -#define TPM_TIS_BASE_ADDRESS 0xfed40000 - -#define TIS_REG(LOCTY, REG) \ - (void *)(TPM_TIS_BASE_ADDRESS + (LOCTY << 12) + REG) - -/* hardware registers */ -#define TIS_REG_ACCESS 0x0 -#define TIS_REG_INT_ENABLE 0x8 -#define TIS_REG_INT_VECTOR 0xc -#define TIS_REG_INT_STATUS 0x10 -#define TIS_REG_INTF_CAPABILITY 0x14 -#define TIS_REG_STS 0x18 -#define TIS_REG_DATA_FIFO 0x24 -#define TIS_REG_IFACE_ID 0x30 -#define TIS_REG_DID_VID 0xf00 -#define TIS_REG_RID 0xf04 - -#define TIS_STS_VALID (1 << 7) /* 0x80 */ -#define TIS_STS_COMMAND_READY (1 << 6) /* 0x40 */ -#define TIS_STS_TPM_GO (1 << 5) /* 0x20 */ -#define TIS_STS_DATA_AVAILABLE (1 << 4) /* 0x10 */ -#define TIS_STS_EXPECT (1 << 3) /* 0x08 */ -#define TIS_STS_RESPONSE_RETRY (1 << 1) /* 0x02 */ - -#define TIS_ACCESS_TPM_REG_VALID_STS (1 << 7) /* 0x80 */ -#define TIS_ACCESS_ACTIVE_LOCALITY (1 << 5) /* 0x20 */ -#define TIS_ACCESS_BEEN_SEIZED (1 << 4) /* 0x10 */ -#define TIS_ACCESS_SEIZE (1 << 3) /* 0x08 */ -#define TIS_ACCESS_PENDING_REQUEST (1 << 2) /* 0x04 */ -#define TIS_ACCESS_REQUEST_USE (1 << 1) /* 0x02 */ -#define TIS_ACCESS_TPM_ESTABLISHMENT (1 << 0) /* 0x01 */ - -/* - * Default TIS timeouts used before getting them from the TPM itself - */ -#define TIS_DEFAULT_TIMEOUT_A 750000 /* us */ -#define TIS_DEFAULT_TIMEOUT_B 2000000 /* us */ -#define TIS_DEFAULT_TIMEOUT_C 750000 /* us */ -#define TIS_DEFAULT_TIMEOUT_D 750000 /* us */ - -/* - * Default TIS 2 timeouts given in TPM Profile (TPT) Spec - */ -#define TIS2_DEFAULT_TIMEOUT_A 750000 /* us */ -#define TIS2_DEFAULT_TIMEOUT_B 2000000 /* us */ -#define TIS2_DEFAULT_TIMEOUT_C 200000 /* us */ -#define TIS2_DEFAULT_TIMEOUT_D 30000 /* us */ - -enum tisTimeoutType { - TIS_TIMEOUT_TYPE_A = 0, - TIS_TIMEOUT_TYPE_B, - TIS_TIMEOUT_TYPE_C, - TIS_TIMEOUT_TYPE_D, -}; - -/* - * Default command durations used before getting them from the - * TPM itself - */ -#define TPM_DEFAULT_DURATION_SHORT 2000000 /* us */ -#define TPM_DEFAULT_DURATION_MEDIUM 20000000 /* us */ -#define TPM_DEFAULT_DURATION_LONG 60000000 /* us */ - -/* - * TPM 2 command durations; we set them to the timeout values - * given in TPM Profile (PTP) Specification; exceeding those - * timeout values indicates a faulty TPM. - */ -#define TPM2_DEFAULT_DURATION_SHORT 750000 /* us */ -#define TPM2_DEFAULT_DURATION_MEDIUM 2000000 /* us */ -#define TPM2_DEFAULT_DURATION_LONG 2000000 /* us */ - -#endif /* TPM_DRIVERS_H */ diff --git a/payloads/external/SeaBIOS/src/hw/usb-ehci.c b/payloads/external/SeaBIOS/src/hw/usb-ehci.c deleted file mode 100644 index d01fa853..00000000 --- a/payloads/external/SeaBIOS/src/hw/usb-ehci.c +++ /dev/null @@ -1,650 +0,0 @@ -// Code for handling EHCI USB controllers. -// -// Copyright (C) 2010-2013 Kevin O'Connor <kevin@koconnor.net> -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "biosvar.h" // GET_LOWFLAT -#include "config.h" // CONFIG_* -#include "output.h" // dprintf -#include "malloc.h" // free -#include "memmap.h" // PAGE_SIZE -#include "pcidevice.h" // foreachpci -#include "pci_ids.h" // PCI_CLASS_SERIAL_USB_UHCI -#include "pci_regs.h" // PCI_BASE_ADDRESS_0 -#include "string.h" // memset -#include "usb.h" // struct usb_s -#include "usb-ehci.h" // struct ehci_qh -#include "util.h" // msleep -#include "x86.h" // readl - -struct usb_ehci_s { - struct usb_s usb; - struct ehci_caps *caps; - struct ehci_regs *regs; - struct ehci_qh *async_qh; - int checkports; -}; - -struct ehci_pipe { - struct ehci_qh qh; - struct ehci_qtd *next_td, *tds; - void *data; - struct usb_pipe pipe; -}; - -static int PendingEHCI; - - -/**************************************************************** - * Root hub - ****************************************************************/ - -#define EHCI_TIME_POSTPOWER 20 -#define EHCI_TIME_POSTRESET 2 - -// Check if device attached to port -static int -ehci_hub_detect(struct usbhub_s *hub, u32 port) -{ - struct usb_ehci_s *cntl = container_of(hub->cntl, struct usb_ehci_s, usb); - u32 *portreg = &cntl->regs->portsc[port]; - u32 portsc = readl(portreg); - - if (!(portsc & PORT_CONNECT)) - // No device present - return 0; - - if ((portsc & PORT_LINESTATUS_MASK) == PORT_LINESTATUS_KSTATE) { - // low speed device - writel(portreg, portsc | PORT_OWNER); - return -1; - } - - // XXX - if just powered up, need to wait for USB_TIME_ATTDB? - - // Begin reset on port - portsc = (portsc & ~PORT_PE) | PORT_RESET; - writel(portreg, portsc); - msleep(USB_TIME_DRSTR); - return 1; -} - -// Reset device on port -static int -ehci_hub_reset(struct usbhub_s *hub, u32 port) -{ - struct usb_ehci_s *cntl = container_of(hub->cntl, struct usb_ehci_s, usb); - u32 *portreg = &cntl->regs->portsc[port]; - u32 portsc = readl(portreg); - - // Finish reset on port - portsc &= ~PORT_RESET; - writel(portreg, portsc); - msleep(EHCI_TIME_POSTRESET); - - portsc = readl(portreg); - if (!(portsc & PORT_CONNECT)) - // No longer connected - return -1; - if (!(portsc & PORT_PE)) { - // full speed device - writel(portreg, portsc | PORT_OWNER); - return -1; - } - - return USB_HIGHSPEED; -} - -// Disable port -static void -ehci_hub_disconnect(struct usbhub_s *hub, u32 port) -{ - struct usb_ehci_s *cntl = container_of(hub->cntl, struct usb_ehci_s, usb); - u32 *portreg = &cntl->regs->portsc[port]; - u32 portsc = readl(portreg); - writel(portreg, portsc & ~PORT_PE); -} - -static struct usbhub_op_s ehci_HubOp = { - .detect = ehci_hub_detect, - .reset = ehci_hub_reset, - .disconnect = ehci_hub_disconnect, -}; - -// Find any devices connected to the root hub. -static int -check_ehci_ports(struct usb_ehci_s *cntl) -{ - // Power up ports. - int i; - for (i=0; i<cntl->checkports; i++) { - u32 *portreg = &cntl->regs->portsc[i]; - u32 portsc = readl(portreg); - if (!(portsc & PORT_POWER)) { - portsc |= PORT_POWER; - writel(portreg, portsc); - } - } - msleep(EHCI_TIME_POSTPOWER); - - struct usbhub_s hub; - memset(&hub, 0, sizeof(hub)); - hub.cntl = &cntl->usb; - hub.portcount = cntl->checkports; - hub.op = &ehci_HubOp; - usb_enumerate(&hub); - return hub.devcount; -} - - -/**************************************************************** - * Setup - ****************************************************************/ - -// Wait for next USB async frame to start - for ensuring safe memory release. -static void -ehci_waittick(struct usb_ehci_s *cntl) -{ - if (MODE16) { - msleep(10); - return; - } - // Wait for access to "doorbell" - barrier(); - u32 cmd, sts; - u32 end = timer_calc(100); - for (;;) { - sts = readl(&cntl->regs->usbsts); - if (!(sts & STS_IAA)) { - cmd = readl(&cntl->regs->usbcmd); - if (!(cmd & CMD_IAAD)) - break; - } - if (timer_check(end)) { - warn_timeout(); - return; - } - yield(); - } - // Ring "doorbell" - writel(&cntl->regs->usbcmd, cmd | CMD_IAAD); - // Wait for completion - for (;;) { - sts = readl(&cntl->regs->usbsts); - if (sts & STS_IAA) - break; - if (timer_check(end)) { - warn_timeout(); - return; - } - yield(); - } - // Ack completion - writel(&cntl->regs->usbsts, STS_IAA); -} - -static void -ehci_free_pipes(struct usb_ehci_s *cntl) -{ - dprintf(7, "ehci_free_pipes %p\n", cntl); - - struct ehci_qh *start = cntl->async_qh; - struct ehci_qh *pos = start; - for (;;) { - struct ehci_qh *next = (void*)(pos->next & ~EHCI_PTR_BITS); - if (next == start) - break; - struct ehci_pipe *pipe = container_of(next, struct ehci_pipe, qh); - if (usb_is_freelist(&cntl->usb, &pipe->pipe)) - pos->next = next->next; - else - pos = next; - } - ehci_waittick(cntl); - for (;;) { - struct usb_pipe *usbpipe = cntl->usb.freelist; - if (!usbpipe) - break; - cntl->usb.freelist = usbpipe->freenext; - struct ehci_pipe *pipe = container_of(usbpipe, struct ehci_pipe, pipe); - free(pipe); - } -} - -static void -configure_ehci(void *data) -{ - struct usb_ehci_s *cntl = data; - - // Allocate ram for schedule storage - struct ehci_framelist *fl = memalign_high(sizeof(*fl), sizeof(*fl)); - struct ehci_qh *intr_qh = memalign_high(EHCI_QH_ALIGN, sizeof(*intr_qh)); - struct ehci_qh *async_qh = memalign_high(EHCI_QH_ALIGN, sizeof(*async_qh)); - if (!fl || !intr_qh || !async_qh) { - warn_noalloc(); - PendingEHCI--; - goto fail; - } - - // XXX - check for halted? - - // Reset the HC - u32 cmd = readl(&cntl->regs->usbcmd); - writel(&cntl->regs->usbcmd, (cmd & ~(CMD_ASE | CMD_PSE)) | CMD_HCRESET); - u32 end = timer_calc(250); - for (;;) { - cmd = readl(&cntl->regs->usbcmd); - if (!(cmd & CMD_HCRESET)) - break; - if (timer_check(end)) { - warn_timeout(); - PendingEHCI--; - goto fail; - } - yield(); - } - - // Disable interrupts (just to be safe). - writel(&cntl->regs->usbintr, 0); - - // Set schedule to point to primary intr queue head - memset(intr_qh, 0, sizeof(*intr_qh)); - intr_qh->next = EHCI_PTR_TERM; - intr_qh->info2 = (0x01 << QH_SMASK_SHIFT); - intr_qh->token = QTD_STS_HALT; - intr_qh->qtd_next = intr_qh->alt_next = EHCI_PTR_TERM; - int i; - for (i=0; i<ARRAY_SIZE(fl->links); i++) - fl->links[i] = (u32)intr_qh | EHCI_PTR_QH; - writel(&cntl->regs->periodiclistbase, (u32)fl); - - // Set async list to point to primary async queue head - memset(async_qh, 0, sizeof(*async_qh)); - async_qh->next = (u32)async_qh | EHCI_PTR_QH; - async_qh->info1 = QH_HEAD; - async_qh->token = QTD_STS_HALT; - async_qh->qtd_next = async_qh->alt_next = EHCI_PTR_TERM; - cntl->async_qh = async_qh; - writel(&cntl->regs->asynclistbase, (u32)async_qh); - - // Enable queues - writel(&cntl->regs->usbcmd, cmd | CMD_ASE | CMD_PSE | CMD_RUN); - - // Set default of high speed for root hub. - writel(&cntl->regs->configflag, 1); - PendingEHCI--; - - // Find devices - int count = check_ehci_ports(cntl); - ehci_free_pipes(cntl); - if (count) - // Success - return; - - // No devices found - shutdown and free controller. - writel(&cntl->regs->usbcmd, cmd & ~CMD_RUN); - msleep(4); // 2ms to stop reading memory - XXX -fail: - free(fl); - free(intr_qh); - free(async_qh); - free(cntl); -} - -static void -ehci_controller_setup(struct pci_device *pci) -{ - struct ehci_caps *caps = pci_enable_membar(pci, PCI_BASE_ADDRESS_0); - if (!caps) - return; - u32 hcc_params = readl(&caps->hccparams); - - struct usb_ehci_s *cntl = malloc_tmphigh(sizeof(*cntl)); - if (!cntl) { - warn_noalloc(); - return; - } - memset(cntl, 0, sizeof(*cntl)); - cntl->usb.pci = pci; - cntl->usb.type = USB_TYPE_EHCI; - cntl->caps = caps; - cntl->checkports = readl(&cntl->caps->hcsparams) & HCS_N_PORTS_MASK; - cntl->regs = (void*)caps + readb(&caps->caplength); - if (hcc_params & HCC_64BIT_ADDR) - cntl->regs->ctrldssegment = 0; - PendingEHCI++; - - dprintf(1, "EHCI init on dev %pP (regs=%p)\n", pci, cntl->regs); - - pci_enable_busmaster(pci); - - // XXX - check for and disable SMM control? - - run_thread(configure_ehci, cntl); -} - -void -ehci_setup(void) -{ - if (! CONFIG_USB_EHCI) - return; - struct pci_device *pci; - foreachpci(pci) { - if (pci_classprog(pci) == PCI_CLASS_SERIAL_USB_EHCI) - ehci_controller_setup(pci); - } -} - -// Wait for all EHCI controllers to initialize. This forces OHCI/UHCI -// setup to always be after any EHCI ports are routed to EHCI. -void -ehci_wait_controllers(void) -{ - while (CONFIG_USB_EHCI && CONFIG_THREADS && PendingEHCI) - yield(); -} - - -/**************************************************************** - * End point communication - ****************************************************************/ - -// Setup fields in qh -static void -ehci_desc2pipe(struct ehci_pipe *pipe, struct usbdevice_s *usbdev - , struct usb_endpoint_descriptor *epdesc) -{ - usb_desc2pipe(&pipe->pipe, usbdev, epdesc); - - pipe->qh.info1 = ((pipe->pipe.maxpacket << QH_MAXPACKET_SHIFT) - | (pipe->pipe.speed << QH_SPEED_SHIFT) - | (pipe->pipe.ep << QH_EP_SHIFT) - | (pipe->pipe.devaddr << QH_DEVADDR_SHIFT)); - - pipe->qh.info2 = (1 << QH_MULT_SHIFT); - struct usbdevice_s *hubdev = usbdev->hub->usbdev; - if (hubdev) { - struct ehci_pipe *hpipe = container_of( - hubdev->defpipe, struct ehci_pipe, pipe); - if (hpipe->pipe.speed == USB_HIGHSPEED) - pipe->qh.info2 |= (((usbdev->port+1) << QH_HUBPORT_SHIFT) - | (hpipe->pipe.devaddr << QH_HUBADDR_SHIFT)); - else - pipe->qh.info2 = hpipe->qh.info2; - } - - u8 eptype = epdesc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK; - if (eptype == USB_ENDPOINT_XFER_CONTROL) - pipe->qh.info1 |= ((pipe->pipe.speed != USB_HIGHSPEED ? QH_CONTROL : 0) - | QH_TOGGLECONTROL); - else if (eptype == USB_ENDPOINT_XFER_INT) - pipe->qh.info2 |= (0x01 << QH_SMASK_SHIFT) | (0x1c << QH_CMASK_SHIFT); -} - -static struct usb_pipe * -ehci_alloc_intr_pipe(struct usbdevice_s *usbdev - , struct usb_endpoint_descriptor *epdesc) -{ - struct usb_ehci_s *cntl = container_of( - usbdev->hub->cntl, struct usb_ehci_s, usb); - int frameexp = usb_get_period(usbdev, epdesc); - dprintf(7, "ehci_alloc_intr_pipe %p %d\n", &cntl->usb, frameexp); - - if (frameexp > 10) - frameexp = 10; - int maxpacket = epdesc->wMaxPacketSize; - // Determine number of entries needed for 2 timer ticks. - int ms = 1<<frameexp; - int count = DIV_ROUND_UP(ticks_to_ms(2), ms); - struct ehci_pipe *pipe = memalign_low(EHCI_QH_ALIGN, sizeof(*pipe)); - struct ehci_qtd *tds = memalign_low(EHCI_QTD_ALIGN, sizeof(*tds) * count); - void *data = malloc_low(maxpacket * count); - if (!pipe || !tds || !data) { - warn_noalloc(); - goto fail; - } - memset(pipe, 0, sizeof(*pipe)); - memset(tds, 0, sizeof(*tds) * count); - memset(data, 0, maxpacket * count); - ehci_desc2pipe(pipe, usbdev, epdesc); - pipe->next_td = pipe->tds = tds; - pipe->data = data; - pipe->qh.qtd_next = (u32)tds; - - int i; - for (i=0; i<count; i++) { - struct ehci_qtd *td = &tds[i]; - td->qtd_next = (i==count-1 ? (u32)tds : (u32)&td[1]); - td->alt_next = EHCI_PTR_TERM; - td->token = (ehci_explen(maxpacket) | QTD_STS_ACTIVE - | QTD_PID_IN | ehci_maxerr(3)); - td->buf[0] = (u32)data + maxpacket * i; - } - - // Add to interrupt schedule. - struct ehci_framelist *fl = (void*)readl(&cntl->regs->periodiclistbase); - if (frameexp == 0) { - // Add to existing interrupt entry. - struct ehci_qh *intr_qh = (void*)(fl->links[0] & ~EHCI_PTR_BITS); - pipe->qh.next = intr_qh->next; - barrier(); - intr_qh->next = (u32)&pipe->qh | EHCI_PTR_QH; - } else { - int startpos = 1<<(frameexp-1); - pipe->qh.next = fl->links[startpos]; - barrier(); - for (i=startpos; i<ARRAY_SIZE(fl->links); i+=ms) - fl->links[i] = (u32)&pipe->qh | EHCI_PTR_QH; - } - - return &pipe->pipe; -fail: - free(pipe); - free(tds); - free(data); - return NULL; -} - -struct usb_pipe * -ehci_realloc_pipe(struct usbdevice_s *usbdev, struct usb_pipe *upipe - , struct usb_endpoint_descriptor *epdesc) -{ - if (! CONFIG_USB_EHCI) - return NULL; - usb_add_freelist(upipe); - if (!epdesc) - return NULL; - u8 eptype = epdesc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK; - if (eptype == USB_ENDPOINT_XFER_INT) - return ehci_alloc_intr_pipe(usbdev, epdesc); - struct usb_ehci_s *cntl = container_of( - usbdev->hub->cntl, struct usb_ehci_s, usb); - dprintf(7, "ehci_alloc_async_pipe %p %d\n", &cntl->usb, eptype); - - struct usb_pipe *usbpipe = usb_get_freelist(&cntl->usb, eptype); - if (usbpipe) { - // Use previously allocated pipe. - struct ehci_pipe *pipe = container_of(usbpipe, struct ehci_pipe, pipe); - ehci_desc2pipe(pipe, usbdev, epdesc); - pipe->qh.token = 0; - return usbpipe; - } - - // Allocate a new queue head. - struct ehci_pipe *pipe; - if (eptype == USB_ENDPOINT_XFER_CONTROL) - pipe = memalign_tmphigh(EHCI_QH_ALIGN, sizeof(*pipe)); - else - pipe = memalign_low(EHCI_QH_ALIGN, sizeof(*pipe)); - if (!pipe) { - warn_noalloc(); - return NULL; - } - memset(pipe, 0, sizeof(*pipe)); - ehci_desc2pipe(pipe, usbdev, epdesc); - pipe->qh.qtd_next = pipe->qh.alt_next = EHCI_PTR_TERM; - - // Add queue head to controller list. - struct ehci_qh *async_qh = cntl->async_qh; - pipe->qh.next = async_qh->next; - barrier(); - async_qh->next = (u32)&pipe->qh | EHCI_PTR_QH; - return &pipe->pipe; -} - -static void -ehci_reset_pipe(struct ehci_pipe *pipe) -{ - SET_LOWFLAT(pipe->qh.qtd_next, EHCI_PTR_TERM); - SET_LOWFLAT(pipe->qh.alt_next, EHCI_PTR_TERM); - barrier(); - SET_LOWFLAT(pipe->qh.token, GET_LOWFLAT(pipe->qh.token) & QTD_TOGGLE); -} - -static int -ehci_wait_td(struct ehci_pipe *pipe, struct ehci_qtd *td, u32 end) -{ - u32 status; - for (;;) { - status = td->token; - if (!(status & QTD_STS_ACTIVE)) - break; - if (timer_check(end)) { - u32 cur = GET_LOWFLAT(pipe->qh.current); - u32 tok = GET_LOWFLAT(pipe->qh.token); - u32 next = GET_LOWFLAT(pipe->qh.qtd_next); - warn_timeout(); - dprintf(1, "ehci pipe=%p cur=%08x tok=%08x next=%x td=%p status=%x\n" - , pipe, cur, tok, next, td, status); - ehci_reset_pipe(pipe); - struct usb_ehci_s *cntl = container_of( - GET_LOWFLAT(pipe->pipe.cntl), struct usb_ehci_s, usb); - ehci_waittick(cntl); - return -1; - } - yield(); - } - if (status & QTD_STS_HALT) { - dprintf(1, "ehci_wait_td error - status=%x\n", status); - ehci_reset_pipe(pipe); - return -2; - } - return 0; -} - -static void -ehci_fill_tdbuf(struct ehci_qtd *td, u32 dest, int transfer) -{ - u32 *pos = td->buf, end = dest + transfer; - for (; dest < end; dest = ALIGN_DOWN(dest + PAGE_SIZE, PAGE_SIZE)) - *pos++ = dest; -} - -#define STACKQTDS 6 - -int -ehci_send_pipe(struct usb_pipe *p, int dir, const void *cmd - , void *data, int datasize) -{ - if (! CONFIG_USB_EHCI) - return -1; - struct ehci_pipe *pipe = container_of(p, struct ehci_pipe, pipe); - dprintf(7, "ehci_send_pipe qh=%p dir=%d data=%p size=%d\n" - , &pipe->qh, dir, data, datasize); - - // Allocate tds on stack (with required alignment) - u8 tdsbuf[sizeof(struct ehci_qtd) * STACKQTDS + EHCI_QTD_ALIGN - 1]; - struct ehci_qtd *tds = (void*)ALIGN((u32)tdsbuf, EHCI_QTD_ALIGN), *td = tds; - memset(tds, 0, sizeof(*tds) * STACKQTDS); - - // Setup transfer descriptors - u16 maxpacket = GET_LOWFLAT(pipe->pipe.maxpacket); - u32 toggle = 0; - if (cmd) { - // Send setup pid on control transfers - td->qtd_next = (u32)MAKE_FLATPTR(GET_SEG(SS), td+1); - td->alt_next = EHCI_PTR_TERM; - td->token = (ehci_explen(USB_CONTROL_SETUP_SIZE) | QTD_STS_ACTIVE - | QTD_PID_SETUP | ehci_maxerr(3)); - ehci_fill_tdbuf(td, (u32)cmd, USB_CONTROL_SETUP_SIZE); - td++; - toggle = QTD_TOGGLE; - } - u32 dest = (u32)data, dataend = dest + datasize; - while (dest < dataend) { - // Send data pids - if (td >= &tds[STACKQTDS]) { - warn_noalloc(); - return -1; - } - int maxtransfer = 5*PAGE_SIZE - (dest & (PAGE_SIZE-1)); - int transfer = dataend - dest; - if (transfer > maxtransfer) - transfer = ALIGN_DOWN(maxtransfer, maxpacket); - td->qtd_next = (u32)MAKE_FLATPTR(GET_SEG(SS), td+1); - td->alt_next = EHCI_PTR_TERM; - td->token = (ehci_explen(transfer) | toggle | QTD_STS_ACTIVE - | (dir ? QTD_PID_IN : QTD_PID_OUT) | ehci_maxerr(3)); - ehci_fill_tdbuf(td, dest, transfer); - td++; - dest += transfer; - } - if (cmd) { - // Send status pid on control transfers - if (td >= &tds[STACKQTDS]) { - warn_noalloc(); - return -1; - } - td->qtd_next = EHCI_PTR_TERM; - td->alt_next = EHCI_PTR_TERM; - td->token = (QTD_TOGGLE | QTD_STS_ACTIVE - | (dir ? QTD_PID_OUT : QTD_PID_IN) | ehci_maxerr(3)); - td++; - } - - // Transfer data - (td-1)->qtd_next = EHCI_PTR_TERM; - barrier(); - SET_LOWFLAT(pipe->qh.qtd_next, (u32)MAKE_FLATPTR(GET_SEG(SS), tds)); - u32 end = timer_calc(usb_xfer_time(p, datasize)); - int i; - for (i=0, td=tds; i<STACKQTDS; i++, td++) { - int ret = ehci_wait_td(pipe, td, end); - if (ret) - return -1; - } - - return 0; -} - -int -ehci_poll_intr(struct usb_pipe *p, void *data) -{ - ASSERT16(); - if (! CONFIG_USB_EHCI) - return -1; - struct ehci_pipe *pipe = container_of(p, struct ehci_pipe, pipe); - struct ehci_qtd *td = GET_LOWFLAT(pipe->next_td); - u32 token = GET_LOWFLAT(td->token); - if (token & QTD_STS_ACTIVE) - // No intrs found. - return -1; - // XXX - check for errors. - - // Copy data. - int maxpacket = GET_LOWFLAT(pipe->pipe.maxpacket); - int pos = td - GET_LOWFLAT(pipe->tds); - void *tddata = GET_LOWFLAT(pipe->data) + maxpacket * pos; - memcpy_far(GET_SEG(SS), data, SEG_LOW, LOWFLAT2LOW(tddata), maxpacket); - - // Reenable this td. - struct ehci_qtd *next = (void*)(GET_LOWFLAT(td->qtd_next) & ~EHCI_PTR_BITS); - SET_LOWFLAT(pipe->next_td, next); - SET_LOWFLAT(td->buf[0], (u32)tddata); - barrier(); - SET_LOWFLAT(td->token, (ehci_explen(maxpacket) | QTD_STS_ACTIVE - | QTD_PID_IN | ehci_maxerr(3))); - - return 0; -} diff --git a/payloads/external/SeaBIOS/src/hw/usb-ehci.h b/payloads/external/SeaBIOS/src/hw/usb-ehci.h deleted file mode 100644 index 0442188b..00000000 --- a/payloads/external/SeaBIOS/src/hw/usb-ehci.h +++ /dev/null @@ -1,177 +0,0 @@ -#ifndef __USB_EHCI_H -#define __USB_EHCI_H - -// usb-ehci.c -void ehci_setup(void); -void ehci_wait_controllers(void); -struct usbdevice_s; -struct usb_endpoint_descriptor; -struct usb_pipe; -struct usb_pipe *ehci_realloc_pipe(struct usbdevice_s *usbdev - , struct usb_pipe *upipe - , struct usb_endpoint_descriptor *epdesc); -int ehci_send_pipe(struct usb_pipe *p, int dir, const void *cmd - , void *data, int datasize); -int ehci_poll_intr(struct usb_pipe *p, void *data); - - -/**************************************************************** - * ehci structs and flags - ****************************************************************/ - -struct ehci_caps { - u8 caplength; - u8 reserved_01; - u16 hciversion; - u32 hcsparams; - u32 hccparams; - u64 portroute; -} PACKED; - -#define HCC_64BIT_ADDR 1 - -#define HCS_N_PORTS_MASK 0xf - -struct ehci_regs { - u32 usbcmd; - u32 usbsts; - u32 usbintr; - u32 frindex; - u32 ctrldssegment; - u32 periodiclistbase; - u32 asynclistbase; - u32 reserved[9]; - u32 configflag; - u32 portsc[0]; -} PACKED; - -#define CMD_PARK (1<<11) -#define CMD_PARK_CNT(c) (((c)>>8)&3) -#define CMD_LRESET (1<<7) -#define CMD_IAAD (1<<6) -#define CMD_ASE (1<<5) -#define CMD_PSE (1<<4) -#define CMD_HCRESET (1<<1) -#define CMD_RUN (1<<0) - -#define STS_ASS (1<<15) -#define STS_PSS (1<<14) -#define STS_RECL (1<<13) -#define STS_HALT (1<<12) -#define STS_IAA (1<<5) -#define STS_FATAL (1<<4) -#define STS_FLR (1<<3) -#define STS_PCD (1<<2) -#define STS_ERR (1<<1) -#define STS_INT (1<<0) - -#define FLAG_CF (1<<0) - -#define PORT_WKOC_E (1<<22) -#define PORT_WKDISC_E (1<<21) -#define PORT_WKCONN_E (1<<20) -#define PORT_TEST_PKT (0x4<<16) -#define PORT_LED_OFF (0<<14) -#define PORT_LED_AMBER (1<<14) -#define PORT_LED_GREEN (2<<14) -#define PORT_LED_MASK (3<<14) -#define PORT_OWNER (1<<13) -#define PORT_POWER (1<<12) -#define PORT_LINESTATUS_MASK (3<<10) -#define PORT_LINESTATUS_KSTATE (1<<10) -#define PORT_RESET (1<<8) -#define PORT_SUSPEND (1<<7) -#define PORT_RESUME (1<<6) -#define PORT_OCC (1<<5) -#define PORT_OC (1<<4) -#define PORT_PEC (1<<3) -#define PORT_PE (1<<2) -#define PORT_CSC (1<<1) -#define PORT_CONNECT (1<<0) -#define PORT_RWC_BITS (PORT_CSC | PORT_PEC | PORT_OCC) - - -#define EHCI_QH_ALIGN 128 // Can't span a 4K boundary, so increase from 32 - -struct ehci_qh { - u32 next; - u32 info1; - u32 info2; - u32 current; - - u32 qtd_next; - u32 alt_next; - u32 token; - u32 buf[5]; - u32 buf_hi[5]; -} PACKED; - -#define QH_CONTROL (1 << 27) -#define QH_MAXPACKET_SHIFT 16 -#define QH_MAXPACKET_MASK (0x7ff << QH_MAXPACKET_SHIFT) -#define QH_HEAD (1 << 15) -#define QH_TOGGLECONTROL (1 << 14) -#define QH_SPEED_SHIFT 12 -#define QH_SPEED_MASK (0x3 << QH_SPEED_SHIFT) -#define QH_EP_SHIFT 8 -#define QH_EP_MASK (0xf << QH_EP_SHIFT) -#define QH_DEVADDR_SHIFT 0 -#define QH_DEVADDR_MASK (0x7f << QH_DEVADDR_SHIFT) - -#define QH_SMASK_SHIFT 0 -#define QH_SMASK_MASK (0xff << QH_SMASK_SHIFT) -#define QH_CMASK_SHIFT 8 -#define QH_CMASK_MASK (0xff << QH_CMASK_SHIFT) -#define QH_HUBADDR_SHIFT 16 -#define QH_HUBADDR_MASK (0x7f << QH_HUBADDR_SHIFT) -#define QH_HUBPORT_SHIFT 23 -#define QH_HUBPORT_MASK (0x7f << QH_HUBPORT_SHIFT) -#define QH_MULT_SHIFT 30 -#define QH_MULT_MASK (0x3 << QH_MULT_SHIFT) - -#define EHCI_PTR_BITS 0x001F -#define EHCI_PTR_TERM 0x0001 -#define EHCI_PTR_QH 0x0002 - - -#define EHCI_QTD_ALIGN 64 // Can't span a 4K boundary, so increase from 32 - -struct ehci_qtd { - u32 qtd_next; - u32 alt_next; - u32 token; - u32 buf[5]; - u32 buf_hi[5]; - /* keep struct size a multiple of 64 bytes, as we're allocating - arrays. Without this padding, the second qtd could have the - wrong alignment. */ -} PACKED __aligned(EHCI_QTD_ALIGN); - -#define QTD_TOGGLE (1 << 31) -#define QTD_LENGTH_SHIFT 16 -#define QTD_LENGTH_MASK (0x7fff << QTD_LENGTH_SHIFT) -#define QTD_CERR_SHIFT 10 -#define QTD_CERR_MASK (0x3 << QTD_CERR_SHIFT) -#define QTD_IOC (1 << 15) -#define QTD_PID_OUT (0x0 << 8) -#define QTD_PID_IN (0x1 << 8) -#define QTD_PID_SETUP (0x2 << 8) -#define QTD_STS_ACTIVE (1 << 7) -#define QTD_STS_HALT (1 << 6) -#define QTD_STS_DBE (1 << 5) -#define QTD_STS_BABBLE (1 << 4) -#define QTD_STS_XACT (1 << 3) -#define QTD_STS_MMF (1 << 2) -#define QTD_STS_STS (1 << 1) -#define QTD_STS_PING (1 << 0) - -#define ehci_explen(len) (((len) << QTD_LENGTH_SHIFT) & QTD_LENGTH_MASK) - -#define ehci_maxerr(err) (((err) << QTD_CERR_SHIFT) & QTD_CERR_MASK) - - -struct ehci_framelist { - u32 links[1024]; -} PACKED; - -#endif // usb-ehci.h diff --git a/payloads/external/SeaBIOS/src/hw/usb-hid.c b/payloads/external/SeaBIOS/src/hw/usb-hid.c deleted file mode 100644 index 92c6b197..00000000 --- a/payloads/external/SeaBIOS/src/hw/usb-hid.c +++ /dev/null @@ -1,453 +0,0 @@ -// Code for handling USB Human Interface Devices (HID). -// -// Copyright (C) 2009 Kevin O'Connor <kevin@koconnor.net> -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "biosvar.h" // GET_GLOBAL -#include "config.h" // CONFIG_* -#include "output.h" // dprintf -#include "ps2port.h" // ATKBD_CMD_GETID -#include "usb.h" // usb_ctrlrequest -#include "usb-hid.h" // usb_keyboard_setup -#include "util.h" // process_key - -struct usb_pipe *keyboard_pipe VARFSEG; -struct usb_pipe *mouse_pipe VARFSEG; - - -/**************************************************************** - * Setup - ****************************************************************/ - -// Send USB HID protocol message. -static int -set_protocol(struct usb_pipe *pipe, u16 val) -{ - struct usb_ctrlrequest req; - req.bRequestType = USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE; - req.bRequest = HID_REQ_SET_PROTOCOL; - req.wValue = val; - req.wIndex = 0; - req.wLength = 0; - return usb_send_default_control(pipe, &req, NULL); -} - -// Send USB HID SetIdle request. -static int -set_idle(struct usb_pipe *pipe, int ms) -{ - struct usb_ctrlrequest req; - req.bRequestType = USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE; - req.bRequest = HID_REQ_SET_IDLE; - req.wValue = (ms/4)<<8; - req.wIndex = 0; - req.wLength = 0; - return usb_send_default_control(pipe, &req, NULL); -} - -#define KEYREPEATWAITMS 500 -#define KEYREPEATMS 33 - -// Format of USB keyboard event data -struct keyevent { - u8 modifiers; - u8 reserved; - u8 keys[6]; -}; - -#define MAX_KBD_EVENT 16 - -static int -usb_kbd_setup(struct usbdevice_s *usbdev - , struct usb_endpoint_descriptor *epdesc) -{ - if (! CONFIG_USB_KEYBOARD) - return -1; - if (keyboard_pipe) - // XXX - this enables the first found keyboard (could be random) - return -1; - - if (epdesc->wMaxPacketSize < sizeof(struct keyevent) - || epdesc->wMaxPacketSize > MAX_KBD_EVENT) { - dprintf(1, "USB keyboard wMaxPacketSize=%d; aborting\n" - , epdesc->wMaxPacketSize); - return -1; - } - - // Enable "boot" protocol. - int ret = set_protocol(usbdev->defpipe, 0); - if (ret) - return -1; - // Periodically send reports to enable key repeat. - ret = set_idle(usbdev->defpipe, KEYREPEATMS); - if (ret) - dprintf(3, "Warning: Failed to set key repeat rate\n"); - - keyboard_pipe = usb_alloc_pipe(usbdev, epdesc); - if (!keyboard_pipe) - return -1; - - dprintf(1, "USB keyboard initialized\n"); - return 0; -} - -// Format of USB mouse event data -struct mouseevent { - u8 buttons; - u8 x, y; -}; - -#define MAX_MOUSE_EVENT 8 - -static int -usb_mouse_setup(struct usbdevice_s *usbdev - , struct usb_endpoint_descriptor *epdesc) -{ - if (! CONFIG_USB_MOUSE) - return -1; - if (mouse_pipe) - // XXX - this enables the first found mouse (could be random) - return -1; - - if (epdesc->wMaxPacketSize < sizeof(struct mouseevent) - || epdesc->wMaxPacketSize > MAX_MOUSE_EVENT) { - dprintf(1, "USB mouse wMaxPacketSize=%d; aborting\n" - , epdesc->wMaxPacketSize); - return -1; - } - - // Enable "boot" protocol. - int ret = set_protocol(usbdev->defpipe, 0); - if (ret) - return -1; - - mouse_pipe = usb_alloc_pipe(usbdev, epdesc); - if (!mouse_pipe) - return -1; - - dprintf(1, "USB mouse initialized\n"); - return 0; -} - -// Initialize a found USB HID device (if applicable). -int -usb_hid_setup(struct usbdevice_s *usbdev) -{ - if (! CONFIG_USB_KEYBOARD && ! CONFIG_USB_MOUSE) - return -1; - dprintf(2, "usb_hid_setup %p\n", usbdev->defpipe); - - struct usb_interface_descriptor *iface = usbdev->iface; - if (iface->bInterfaceSubClass != USB_INTERFACE_SUBCLASS_BOOT) - // Doesn't support boot protocol. - return -1; - - // Find intr in endpoint. - struct usb_endpoint_descriptor *epdesc = usb_find_desc( - usbdev, USB_ENDPOINT_XFER_INT, USB_DIR_IN); - if (!epdesc) { - dprintf(1, "No usb hid intr in?\n"); - return -1; - } - - if (iface->bInterfaceProtocol == USB_INTERFACE_PROTOCOL_KEYBOARD) - return usb_kbd_setup(usbdev, epdesc); - if (iface->bInterfaceProtocol == USB_INTERFACE_PROTOCOL_MOUSE) - return usb_mouse_setup(usbdev, epdesc); - return -1; -} - - -/**************************************************************** - * Keyboard events - ****************************************************************/ - -// Mapping from USB key id to ps2 key sequence. -static u16 KeyToScanCode[] VAR16 = { - 0x0000, 0x0000, 0x0000, 0x0000, 0x001e, 0x0030, 0x002e, 0x0020, - 0x0012, 0x0021, 0x0022, 0x0023, 0x0017, 0x0024, 0x0025, 0x0026, - 0x0032, 0x0031, 0x0018, 0x0019, 0x0010, 0x0013, 0x001f, 0x0014, - 0x0016, 0x002f, 0x0011, 0x002d, 0x0015, 0x002c, 0x0002, 0x0003, - 0x0004, 0x0005, 0x0006, 0x0007, 0x0008, 0x0009, 0x000a, 0x000b, - 0x001c, 0x0001, 0x000e, 0x000f, 0x0039, 0x000c, 0x000d, 0x001a, - 0x001b, 0x002b, 0x0000, 0x0027, 0x0028, 0x0029, 0x0033, 0x0034, - 0x0035, 0x003a, 0x003b, 0x003c, 0x003d, 0x003e, 0x003f, 0x0040, - 0x0041, 0x0042, 0x0043, 0x0044, 0x0057, 0x0058, 0xe037, 0x0046, - 0xe145, 0xe052, 0xe047, 0xe049, 0xe053, 0xe04f, 0xe051, 0xe04d, - 0xe04b, 0xe050, 0xe048, 0x0045, 0xe035, 0x0037, 0x004a, 0x004e, - 0xe01c, 0x004f, 0x0050, 0x0051, 0x004b, 0x004c, 0x004d, 0x0047, - 0x0048, 0x0049, 0x0052, 0x0053 -}; - -// Mapping from USB modifier id to ps2 key sequence. -static u16 ModifierToScanCode[] VAR16 = { - //lcntl, lshift, lalt, lgui, rcntl, rshift, ralt, rgui - 0x001d, 0x002a, 0x0038, 0xe05b, 0xe01d, 0x0036, 0xe038, 0xe05c -}; - -#define RELEASEBIT 0x80 - -// Translate data from KeyToScanCode[] to calls to process_key(). -static void -prockeys(u16 scancode, u8 key_release, u8 mods) -{ - if (scancode > 0xff) { - if (scancode == 0xe145) { - // XXX - a real AT keyboard would immediately send the key release - if (mods & ((1<<0) | (1<<4))) { - // Cntr+Break key - process_key(0xe0); - process_key(0x46 | key_release); - } else { - // Pause key - process_key(0xe1); - process_key(0x1d | key_release); - process_key(0x45 | key_release); - } - return; - } else if (scancode == 0xe037 && mods & ((1<<2) | (1<<6))) { - // Alt+SysReq key - process_key(0x54 | key_release); - return; - } - process_key(0xe0); - } - process_key(scancode | key_release); -} - -// Handle a USB key press/release event. -static void -procscankey(u8 key, u8 key_release, u8 mods) -{ - if (key >= ARRAY_SIZE(KeyToScanCode)) - return; - u16 scancode = GET_GLOBAL(KeyToScanCode[key]); - if (scancode) - prockeys(scancode, key_release, mods); -} - -// Handle a USB modifier press/release event. -static void -procmodkey(u8 mods, u8 key_release) -{ - int i; - for (i=0; mods; i++) - if (mods & (1<<i)) { - // Modifier key change. - prockeys(GET_GLOBAL(ModifierToScanCode[i]), key_release, 0); - mods &= ~(1<<i); - } -} - -struct usbkeyinfo { - union { - struct { - u8 modifiers; - u8 repeatcount; - u8 keys[6]; - }; - u64 data; - }; -}; -struct usbkeyinfo LastUSBkey VARLOW; - -// Process USB keyboard data. -static void -handle_key(struct keyevent *data) -{ - dprintf(9, "Got key %x %x\n", data->modifiers, data->keys[0]); - - // Load old keys. - struct usbkeyinfo old; - old.data = GET_LOW(LastUSBkey.data); - - // Check for keys no longer pressed. - int addpos = 0; - int i; - for (i=0; i<ARRAY_SIZE(old.keys); i++) { - u8 key = old.keys[i]; - if (!key) - break; - int j; - for (j=0;; j++) { - if (j>=ARRAY_SIZE(data->keys)) { - // Key released. - procscankey(key, RELEASEBIT, data->modifiers); - if (i+1 >= ARRAY_SIZE(old.keys) || !old.keys[i+1]) - // Last pressed key released - disable repeat. - old.repeatcount = 0xff; - break; - } - if (data->keys[j] == key) { - // Key still pressed. - data->keys[j] = 0; - old.keys[addpos++] = key; - break; - } - } - } - procmodkey(old.modifiers & ~data->modifiers, RELEASEBIT); - - // Process new keys - procmodkey(data->modifiers & ~old.modifiers, 0); - old.modifiers = data->modifiers; - for (i=0; i<ARRAY_SIZE(data->keys); i++) { - u8 key = data->keys[i]; - if (!key) - continue; - // New key pressed. - procscankey(key, 0, data->modifiers); - old.keys[addpos++] = key; - old.repeatcount = KEYREPEATWAITMS / KEYREPEATMS + 1; - } - if (addpos < ARRAY_SIZE(old.keys)) - old.keys[addpos] = 0; - - // Check for key repeat event. - if (addpos) { - if (!old.repeatcount) - procscankey(old.keys[addpos-1], 0, data->modifiers); - else if (old.repeatcount != 0xff) - old.repeatcount--; - } - - // Update old keys - SET_LOW(LastUSBkey.data, old.data); -} - -// Check if a USB keyboard event is pending and process it if so. -static void -usb_check_key(void) -{ - if (! CONFIG_USB_KEYBOARD) - return; - struct usb_pipe *pipe = GET_GLOBAL(keyboard_pipe); - if (!pipe) - return; - - for (;;) { - u8 data[MAX_KBD_EVENT]; - int ret = usb_poll_intr(pipe, data); - if (ret) - break; - handle_key((void*)data); - } -} - -// Test if USB keyboard is active. -inline int -usb_kbd_active(void) -{ - if (! CONFIG_USB_KEYBOARD) - return 0; - return GET_GLOBAL(keyboard_pipe) != NULL; -} - -// Handle a ps2 style keyboard command. -inline int -usb_kbd_command(int command, u8 *param) -{ - if (! CONFIG_USB_KEYBOARD) - return -1; - dprintf(9, "usb keyboard cmd=%x\n", command); - switch (command) { - case ATKBD_CMD_GETID: - // Return the id of a standard AT keyboard. - param[0] = 0xab; - param[1] = 0x83; - return 0; - default: - return -1; - } -} - - -/**************************************************************** - * Mouse events - ****************************************************************/ - -// Process USB mouse data. -static void -handle_mouse(struct mouseevent *data) -{ - dprintf(9, "Got mouse b=%x x=%x y=%x\n", data->buttons, data->x, data->y); - - s8 x = data->x, y = -data->y; - u8 flag = ((data->buttons & 0x7) | (1<<3) - | (x & 0x80 ? (1<<4) : 0) | (y & 0x80 ? (1<<5) : 0)); - process_mouse(flag); - process_mouse(x); - process_mouse(y); -} - -// Check if a USB mouse event is pending and process it if so. -static void -usb_check_mouse(void) -{ - if (! CONFIG_USB_MOUSE) - return; - struct usb_pipe *pipe = GET_GLOBAL(mouse_pipe); - if (!pipe) - return; - - for (;;) { - u8 data[MAX_MOUSE_EVENT]; - int ret = usb_poll_intr(pipe, data); - if (ret) - break; - handle_mouse((void*)data); - } -} - -// Test if USB mouse is active. -inline int -usb_mouse_active(void) -{ - if (! CONFIG_USB_MOUSE) - return 0; - return GET_GLOBAL(mouse_pipe) != NULL; -} - -// Handle a ps2 style mouse command. -inline int -usb_mouse_command(int command, u8 *param) -{ - if (! CONFIG_USB_MOUSE) - return -1; - dprintf(9, "usb mouse cmd=%x\n", command); - switch (command) { - case PSMOUSE_CMD_ENABLE: - case PSMOUSE_CMD_DISABLE: - case PSMOUSE_CMD_SETSCALE11: - return 0; - case PSMOUSE_CMD_SETSCALE21: - case PSMOUSE_CMD_SETRATE: - case PSMOUSE_CMD_SETRES: - // XXX - return 0; - case PSMOUSE_CMD_RESET_BAT: - case PSMOUSE_CMD_GETID: - // Return the id of a standard AT mouse. - param[0] = 0xaa; - param[1] = 0x00; - return 0; - - case PSMOUSE_CMD_GETINFO: - param[0] = 0x00; - param[1] = 4; - param[2] = 100; - return 0; - - default: - return -1; - } -} - -// Check for USB events pending - called periodically from timer interrupt. -void -usb_check_event(void) -{ - usb_check_key(); - usb_check_mouse(); -} diff --git a/payloads/external/SeaBIOS/src/hw/usb-hid.h b/payloads/external/SeaBIOS/src/hw/usb-hid.h deleted file mode 100644 index fd7b8f8b..00000000 --- a/payloads/external/SeaBIOS/src/hw/usb-hid.h +++ /dev/null @@ -1,29 +0,0 @@ -#ifndef __USB_HID_H -#define __USB_HID_H - -// usb-hid.c -struct usbdevice_s; -int usb_hid_setup(struct usbdevice_s *usbdev); -int usb_kbd_active(void); -int usb_kbd_command(int command, u8 *param); -int usb_mouse_active(void); -int usb_mouse_command(int command, u8 *param); -void usb_check_event(void); - - -/**************************************************************** - * hid flags - ****************************************************************/ - -#define USB_INTERFACE_SUBCLASS_BOOT 1 -#define USB_INTERFACE_PROTOCOL_KEYBOARD 1 -#define USB_INTERFACE_PROTOCOL_MOUSE 2 - -#define HID_REQ_GET_REPORT 0x01 -#define HID_REQ_GET_IDLE 0x02 -#define HID_REQ_GET_PROTOCOL 0x03 -#define HID_REQ_SET_REPORT 0x09 -#define HID_REQ_SET_IDLE 0x0A -#define HID_REQ_SET_PROTOCOL 0x0B - -#endif // ush-hid.h diff --git a/payloads/external/SeaBIOS/src/hw/usb-hub.c b/payloads/external/SeaBIOS/src/hw/usb-hub.c deleted file mode 100644 index 54e341b7..00000000 --- a/payloads/external/SeaBIOS/src/hw/usb-hub.c +++ /dev/null @@ -1,205 +0,0 @@ -// Code for handling standard USB hubs. -// -// Copyright (C) 2010 Kevin O'Connor <kevin@koconnor.net> -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "config.h" // CONFIG_USB_HUB -#include "output.h" // dprintf -#include "string.h" // memset -#include "usb.h" // struct usb_s -#include "usb-hub.h" // struct usb_hub_descriptor -#include "util.h" // timer_calc - -static int -get_hub_desc(struct usb_pipe *pipe, struct usb_hub_descriptor *desc) -{ - struct usb_ctrlrequest req; - req.bRequestType = USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_DEVICE; - req.bRequest = USB_REQ_GET_DESCRIPTOR; - if (pipe->speed == USB_SUPERSPEED) - req.wValue = USB_DT_HUB3<<8; - else - req.wValue = USB_DT_HUB<<8; - req.wIndex = 0; - req.wLength = sizeof(*desc); - return usb_send_default_control(pipe, &req, desc); -} - -static int -set_hub_depth(struct usb_pipe *pipe, u16 depth) -{ - struct usb_ctrlrequest req; - req.bRequestType = USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_DEVICE; - req.bRequest = HUB_REQ_SET_HUB_DEPTH; - req.wValue = depth; - req.wIndex = 0; - req.wLength = 0; - return usb_send_default_control(pipe, &req, NULL); -} - -static int -set_port_feature(struct usbhub_s *hub, int port, int feature) -{ - struct usb_ctrlrequest req; - req.bRequestType = USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_OTHER; - req.bRequest = USB_REQ_SET_FEATURE; - req.wValue = feature; - req.wIndex = port + 1; - req.wLength = 0; - mutex_lock(&hub->lock); - int ret = usb_send_default_control(hub->usbdev->defpipe, &req, NULL); - mutex_unlock(&hub->lock); - return ret; -} - -static int -clear_port_feature(struct usbhub_s *hub, int port, int feature) -{ - struct usb_ctrlrequest req; - req.bRequestType = USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_OTHER; - req.bRequest = USB_REQ_CLEAR_FEATURE; - req.wValue = feature; - req.wIndex = port + 1; - req.wLength = 0; - mutex_lock(&hub->lock); - int ret = usb_send_default_control(hub->usbdev->defpipe, &req, NULL); - mutex_unlock(&hub->lock); - return ret; -} - -static int -get_port_status(struct usbhub_s *hub, int port, struct usb_port_status *sts) -{ - struct usb_ctrlrequest req; - req.bRequestType = USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_OTHER; - req.bRequest = USB_REQ_GET_STATUS; - req.wValue = 0; - req.wIndex = port + 1; - req.wLength = sizeof(*sts); - mutex_lock(&hub->lock); - int ret = usb_send_default_control(hub->usbdev->defpipe, &req, sts); - mutex_unlock(&hub->lock); - return ret; -} - -// Check if device attached to port -static int -usb_hub_detect(struct usbhub_s *hub, u32 port) -{ - struct usb_port_status sts; - int ret = get_port_status(hub, port, &sts); - if (ret) { - dprintf(1, "Failure on hub port %d detect\n", port); - return -1; - } - return (sts.wPortStatus & USB_PORT_STAT_CONNECTION) ? 1 : 0; -} - -// Disable port -static void -usb_hub_disconnect(struct usbhub_s *hub, u32 port) -{ - int ret = clear_port_feature(hub, port, USB_PORT_FEAT_ENABLE); - if (ret) - dprintf(1, "Failure on hub port %d disconnect\n", port); -} - -// Reset device on port -static int -usb_hub_reset(struct usbhub_s *hub, u32 port) -{ - int ret = set_port_feature(hub, port, USB_PORT_FEAT_RESET); - if (ret) - goto fail; - - // Wait for reset to complete. - struct usb_port_status sts; - u32 end = timer_calc(USB_TIME_DRST * 2); - for (;;) { - ret = get_port_status(hub, port, &sts); - if (ret) - goto fail; - if (!(sts.wPortStatus & USB_PORT_STAT_RESET) - && (hub->usbdev->speed != USB_SUPERSPEED - || !(sts.wPortStatus & USB_PORT_STAT_LINK_MASK))) - break; - if (timer_check(end)) { - warn_timeout(); - goto fail; - } - msleep(5); - } - - // Reset complete. - if (!(sts.wPortStatus & USB_PORT_STAT_CONNECTION)) - // Device no longer present - return -1; - - if (hub->usbdev->speed == USB_SUPERSPEED) - return USB_SUPERSPEED; - return ((sts.wPortStatus & USB_PORT_STAT_SPEED_MASK) - >> USB_PORT_STAT_SPEED_SHIFT); - -fail: - dprintf(1, "Failure on hub port %d reset\n", port); - usb_hub_disconnect(hub, port); - return -1; -} - -static struct usbhub_op_s HubOp = { - .detect = usb_hub_detect, - .reset = usb_hub_reset, - .disconnect = usb_hub_disconnect, -}; - -// Configure a usb hub and then find devices connected to it. -int -usb_hub_setup(struct usbdevice_s *usbdev) -{ - ASSERT32FLAT(); - if (!CONFIG_USB_HUB) - return -1; - - struct usb_hub_descriptor desc; - int ret = get_hub_desc(usbdev->defpipe, &desc); - if (ret) - return ret; - - struct usbhub_s hub; - memset(&hub, 0, sizeof(hub)); - hub.usbdev = usbdev; - hub.cntl = usbdev->defpipe->cntl; - hub.portcount = desc.bNbrPorts; - hub.op = &HubOp; - - if (usbdev->speed == USB_SUPERSPEED) { - int depth = 0; - struct usbdevice_s *parent = usbdev->hub->usbdev; - while (parent) { - depth++; - parent = parent->hub->usbdev; - } - - ret = set_hub_depth(usbdev->defpipe, depth); - if (ret) - return ret; - } - - // Turn on power to ports. - int port; - for (port=0; port<desc.bNbrPorts; port++) { - ret = set_port_feature(&hub, port, USB_PORT_FEAT_POWER); - if (ret) - return ret; - } - // Wait for port power to stabilize. - msleep(desc.bPwrOn2PwrGood * 2); - - usb_enumerate(&hub); - - dprintf(1, "Initialized USB HUB (%d ports used)\n", hub.devcount); - if (hub.devcount) - return 0; - return -1; -} diff --git a/payloads/external/SeaBIOS/src/hw/usb-hub.h b/payloads/external/SeaBIOS/src/hw/usb-hub.h deleted file mode 100644 index 880378ca..00000000 --- a/payloads/external/SeaBIOS/src/hw/usb-hub.h +++ /dev/null @@ -1,64 +0,0 @@ -#ifndef __USB_HUB_H -#define __USB_HUB_H - -// usb-hub.c -struct usbdevice_s; -int usb_hub_setup(struct usbdevice_s *usbdev); - - -/**************************************************************** - * hub flags - ****************************************************************/ - -#define USB_DT_HUB (USB_TYPE_CLASS | 0x09) -#define USB_DT_HUB3 (USB_TYPE_CLASS | 0x0a) - -#define HUB_REQ_SET_HUB_DEPTH 0x0C - -struct usb_hub_descriptor { - u8 bDescLength; - u8 bDescriptorType; - u8 bNbrPorts; - u16 wHubCharacteristics; - u8 bPwrOn2PwrGood; - u8 bHubContrCurrent; - // Variable length fields for DeviceRemovable[], PortPwrCtrlMask[] follow. -} PACKED; - -#define USB_PORT_FEAT_CONNECTION 0 -#define USB_PORT_FEAT_ENABLE 1 -#define USB_PORT_FEAT_SUSPEND 2 -#define USB_PORT_FEAT_OVER_CURRENT 3 -#define USB_PORT_FEAT_RESET 4 -#define USB_PORT_FEAT_POWER 8 -#define USB_PORT_FEAT_LOWSPEED 9 -#define USB_PORT_FEAT_C_CONNECTION 16 -#define USB_PORT_FEAT_C_ENABLE 17 -#define USB_PORT_FEAT_C_SUSPEND 18 -#define USB_PORT_FEAT_C_OVER_CURRENT 19 -#define USB_PORT_FEAT_C_RESET 20 -#define USB_PORT_FEAT_TEST 21 -#define USB_PORT_FEAT_INDICATOR 22 -#define USB_PORT_FEAT_C_PORT_L1 23 - -struct usb_port_status { - u16 wPortStatus; - u16 wPortChange; -} PACKED; - -#define USB_PORT_STAT_CONNECTION 0x0001 -#define USB_PORT_STAT_ENABLE 0x0002 -#define USB_PORT_STAT_SUSPEND 0x0004 -#define USB_PORT_STAT_OVERCURRENT 0x0008 -#define USB_PORT_STAT_RESET 0x0010 -#define USB_PORT_STAT_LINK_SHIFT 5 -#define USB_PORT_STAT_LINK_MASK (0x7 << USB_PORT_STAT_LINK_SHIFT) -#define USB_PORT_STAT_POWER 0x0100 -#define USB_PORT_STAT_SPEED_SHIFT 9 -#define USB_PORT_STAT_SPEED_MASK (0x3 << USB_PORT_STAT_SPEED_SHIFT) -#define USB_PORT_STAT_LOW_SPEED 0x0200 -#define USB_PORT_STAT_HIGH_SPEED 0x0400 -#define USB_PORT_STAT_TEST 0x0800 -#define USB_PORT_STAT_INDICATOR 0x1000 - -#endif // ush-hid.h diff --git a/payloads/external/SeaBIOS/src/hw/usb-msc.c b/payloads/external/SeaBIOS/src/hw/usb-msc.c deleted file mode 100644 index 2b188289..00000000 --- a/payloads/external/SeaBIOS/src/hw/usb-msc.c +++ /dev/null @@ -1,222 +0,0 @@ -// Code for handling USB Mass Storage Controller devices. -// -// Copyright (C) 2010 Kevin O'Connor <kevin@koconnor.net> -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "biosvar.h" // GET_GLOBALFLAT -#include "block.h" // DTYPE_USB -#include "blockcmd.h" // cdb_read -#include "config.h" // CONFIG_USB_MSC -#include "malloc.h" // free -#include "output.h" // dprintf -#include "std/disk.h" // DISK_RET_SUCCESS -#include "string.h" // memset -#include "usb.h" // struct usb_s -#include "usb-msc.h" // usb_msc_setup -#include "util.h" // bootprio_find_usb - -struct usbdrive_s { - struct drive_s drive; - struct usb_pipe *bulkin, *bulkout; - int lun; -}; - - -/**************************************************************** - * Bulk-only drive command processing - ****************************************************************/ - -#define USB_CDB_SIZE 12 - -#define CBW_SIGNATURE 0x43425355 // USBC - -struct cbw_s { - u32 dCBWSignature; - u32 dCBWTag; - u32 dCBWDataTransferLength; - u8 bmCBWFlags; - u8 bCBWLUN; - u8 bCBWCBLength; - u8 CBWCB[16]; -} PACKED; - -#define CSW_SIGNATURE 0x53425355 // USBS - -struct csw_s { - u32 dCSWSignature; - u32 dCSWTag; - u32 dCSWDataResidue; - u8 bCSWStatus; -} PACKED; - -static int -usb_msc_send(struct usbdrive_s *udrive_gf, int dir, void *buf, u32 bytes) -{ - struct usb_pipe *pipe; - if (dir == USB_DIR_OUT) - pipe = GET_GLOBALFLAT(udrive_gf->bulkout); - else - pipe = GET_GLOBALFLAT(udrive_gf->bulkin); - return usb_send_bulk(pipe, dir, buf, bytes); -} - -// Low-level usb command transmit function. -int -usb_process_op(struct disk_op_s *op) -{ - if (!CONFIG_USB_MSC) - return 0; - - dprintf(16, "usb_cmd_data id=%p write=%d count=%d buf=%p\n" - , op->drive_fl, 0, op->count, op->buf_fl); - struct usbdrive_s *udrive_gf = container_of( - op->drive_fl, struct usbdrive_s, drive); - - // Setup command block wrapper. - struct cbw_s cbw; - memset(&cbw, 0, sizeof(cbw)); - int blocksize = scsi_fill_cmd(op, cbw.CBWCB, USB_CDB_SIZE); - if (blocksize < 0) - return default_process_op(op); - u32 bytes = blocksize * op->count; - cbw.dCBWSignature = CBW_SIGNATURE; - cbw.dCBWTag = 999; // XXX - cbw.dCBWDataTransferLength = bytes; - cbw.bmCBWFlags = scsi_is_read(op) ? USB_DIR_IN : USB_DIR_OUT; - cbw.bCBWLUN = GET_GLOBALFLAT(udrive_gf->lun); - cbw.bCBWCBLength = USB_CDB_SIZE; - - // Transfer cbw to device. - int ret = usb_msc_send(udrive_gf, USB_DIR_OUT - , MAKE_FLATPTR(GET_SEG(SS), &cbw), sizeof(cbw)); - if (ret) - goto fail; - - // Transfer data to/from device. - if (bytes) { - ret = usb_msc_send(udrive_gf, cbw.bmCBWFlags, op->buf_fl, bytes); - if (ret) - goto fail; - } - - // Transfer csw info. - struct csw_s csw; - ret = usb_msc_send(udrive_gf, USB_DIR_IN - , MAKE_FLATPTR(GET_SEG(SS), &csw), sizeof(csw)); - if (ret) - goto fail; - - if (!csw.bCSWStatus) - return DISK_RET_SUCCESS; - if (csw.bCSWStatus == 2) - goto fail; - - if (blocksize) - op->count -= csw.dCSWDataResidue / blocksize; - return DISK_RET_EBADTRACK; - -fail: - // XXX - reset connection - dprintf(1, "USB transmission failed\n"); - return DISK_RET_EBADTRACK; -} - -static int -usb_msc_maxlun(struct usb_pipe *pipe) -{ - struct usb_ctrlrequest req; - req.bRequestType = USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE; - req.bRequest = 0xfe; - req.wValue = 0; - req.wIndex = 0; - req.wLength = 1; - unsigned char maxlun; - int ret = usb_send_default_control(pipe, &req, &maxlun); - if (ret) - return 0; - return maxlun; -} - -static int -usb_msc_lun_setup(struct usb_pipe *inpipe, struct usb_pipe *outpipe, - struct usbdevice_s *usbdev, int lun) -{ - // Allocate drive structure. - struct usbdrive_s *drive = malloc_fseg(sizeof(*drive)); - if (!drive) { - warn_noalloc(); - return -1; - } - memset(drive, 0, sizeof(*drive)); - if (usb_32bit_pipe(inpipe)) - drive->drive.type = DTYPE_USB_32; - else - drive->drive.type = DTYPE_USB; - drive->bulkin = inpipe; - drive->bulkout = outpipe; - drive->lun = lun; - - int prio = bootprio_find_usb(usbdev, lun); - int ret = scsi_drive_setup(&drive->drive, "USB MSC", prio); - if (ret) { - dprintf(1, "Unable to configure USB MSC drive.\n"); - free(drive); - return -1; - } - return 0; -} - -/**************************************************************** - * Setup - ****************************************************************/ - -// Configure a usb msc device. -int -usb_msc_setup(struct usbdevice_s *usbdev) -{ - if (!CONFIG_USB_MSC) - return -1; - - // Verify right kind of device - struct usb_interface_descriptor *iface = usbdev->iface; - if ((iface->bInterfaceSubClass != US_SC_SCSI && - iface->bInterfaceSubClass != US_SC_ATAPI_8070 && - iface->bInterfaceSubClass != US_SC_ATAPI_8020) - || iface->bInterfaceProtocol != US_PR_BULK) { - dprintf(1, "Unsupported MSC USB device (subclass=%02x proto=%02x)\n" - , iface->bInterfaceSubClass, iface->bInterfaceProtocol); - return -1; - } - - // Find bulk in and bulk out endpoints. - struct usb_pipe *inpipe = NULL, *outpipe = NULL; - struct usb_endpoint_descriptor *indesc = usb_find_desc( - usbdev, USB_ENDPOINT_XFER_BULK, USB_DIR_IN); - struct usb_endpoint_descriptor *outdesc = usb_find_desc( - usbdev, USB_ENDPOINT_XFER_BULK, USB_DIR_OUT); - if (!indesc || !outdesc) - goto fail; - inpipe = usb_alloc_pipe(usbdev, indesc); - outpipe = usb_alloc_pipe(usbdev, outdesc); - if (!inpipe || !outpipe) - goto fail; - - int maxlun = usb_msc_maxlun(usbdev->defpipe); - int lun, pipesused = 0; - for (lun = 0; lun < maxlun + 1; lun++) { - int ret = usb_msc_lun_setup(inpipe, outpipe, usbdev, lun); - if (!ret) - pipesused = 1; - } - - if (!pipesused) - goto fail; - - return 0; -fail: - dprintf(1, "Unable to configure USB MSC device.\n"); - usb_free_pipe(usbdev, inpipe); - usb_free_pipe(usbdev, outpipe); - return -1; -} diff --git a/payloads/external/SeaBIOS/src/hw/usb-msc.h b/payloads/external/SeaBIOS/src/hw/usb-msc.h deleted file mode 100644 index ff3c3803..00000000 --- a/payloads/external/SeaBIOS/src/hw/usb-msc.h +++ /dev/null @@ -1,10 +0,0 @@ -#ifndef __USB_MSC_H -#define __USB_MSC_H - -// usb-msc.c -struct disk_op_s; -int usb_process_op(struct disk_op_s *op); -struct usbdevice_s; -int usb_msc_setup(struct usbdevice_s *usbdev); - -#endif // ush-msc.h diff --git a/payloads/external/SeaBIOS/src/hw/usb-ohci.c b/payloads/external/SeaBIOS/src/hw/usb-ohci.c deleted file mode 100644 index 90f60e64..00000000 --- a/payloads/external/SeaBIOS/src/hw/usb-ohci.c +++ /dev/null @@ -1,568 +0,0 @@ -// Code for handling OHCI USB controllers. -// -// Copyright (C) 2009 Kevin O'Connor <kevin@koconnor.net> -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "biosvar.h" // GET_LOWFLAT -#include "config.h" // CONFIG_* -#include "malloc.h" // free -#include "memmap.h" // PAGE_SIZE -#include "output.h" // dprintf -#include "pcidevice.h" // foreachpci -#include "pci_ids.h" // PCI_CLASS_SERIAL_USB_OHCI -#include "pci_regs.h" // PCI_BASE_ADDRESS_0 -#include "string.h" // memset -#include "usb.h" // struct usb_s -#include "usb-ehci.h" // ehci_wait_controllers -#include "usb-ohci.h" // struct ohci_hcca -#include "util.h" // msleep -#include "x86.h" // readl - -#define FIT (1 << 31) - -struct usb_ohci_s { - struct usb_s usb; - struct ohci_regs *regs; -}; - -struct ohci_pipe { - struct ohci_ed ed; - struct usb_pipe pipe; - struct ohci_regs *regs; - void *data; - int count; - struct ohci_td *tds; -}; - - -/**************************************************************** - * Root hub - ****************************************************************/ - -// Check if device attached to port -static int -ohci_hub_detect(struct usbhub_s *hub, u32 port) -{ - struct usb_ohci_s *cntl = container_of(hub->cntl, struct usb_ohci_s, usb); - u32 sts = readl(&cntl->regs->roothub_portstatus[port]); - return (sts & RH_PS_CCS) ? 1 : 0; -} - -// Disable port -static void -ohci_hub_disconnect(struct usbhub_s *hub, u32 port) -{ - struct usb_ohci_s *cntl = container_of(hub->cntl, struct usb_ohci_s, usb); - writel(&cntl->regs->roothub_portstatus[port], RH_PS_CCS|RH_PS_LSDA); -} - -// Reset device on port -static int -ohci_hub_reset(struct usbhub_s *hub, u32 port) -{ - struct usb_ohci_s *cntl = container_of(hub->cntl, struct usb_ohci_s, usb); - writel(&cntl->regs->roothub_portstatus[port], RH_PS_PRS); - u32 sts; - u32 end = timer_calc(USB_TIME_DRSTR * 2); - for (;;) { - sts = readl(&cntl->regs->roothub_portstatus[port]); - if (!(sts & RH_PS_PRS)) - // XXX - need to ensure USB_TIME_DRSTR time in reset? - break; - if (timer_check(end)) { - // Timeout. - warn_timeout(); - ohci_hub_disconnect(hub, port); - return -1; - } - yield(); - } - - if ((sts & (RH_PS_CCS|RH_PS_PES)) != (RH_PS_CCS|RH_PS_PES)) - // Device no longer present - return -1; - - return !!(sts & RH_PS_LSDA); -} - -static struct usbhub_op_s ohci_HubOp = { - .detect = ohci_hub_detect, - .reset = ohci_hub_reset, - .disconnect = ohci_hub_disconnect, -}; - -// Find any devices connected to the root hub. -static int -check_ohci_ports(struct usb_ohci_s *cntl) -{ - ASSERT32FLAT(); - // Wait for ehci init - in case this is a "companion controller" - ehci_wait_controllers(); - // Turn on power for all devices on roothub. - u32 rha = readl(&cntl->regs->roothub_a); - rha &= ~(RH_A_PSM | RH_A_OCPM); - writel(&cntl->regs->roothub_status, RH_HS_LPSC); - writel(&cntl->regs->roothub_b, RH_B_PPCM); - msleep((rha >> 24) * 2); - // XXX - need to sleep for USB_TIME_SIGATT if just powered up? - - struct usbhub_s hub; - memset(&hub, 0, sizeof(hub)); - hub.cntl = &cntl->usb; - hub.portcount = rha & RH_A_NDP; - hub.op = &ohci_HubOp; - usb_enumerate(&hub); - return hub.devcount; -} - - -/**************************************************************** - * Setup - ****************************************************************/ - -// Wait for next USB frame to start - for ensuring safe memory release. -static void -ohci_waittick(struct ohci_regs *regs) -{ - barrier(); - struct ohci_hcca *hcca = (void*)regs->hcca; - u32 startframe = hcca->frame_no; - u32 end = timer_calc(1000 * 5); - for (;;) { - if (hcca->frame_no != startframe) - break; - if (timer_check(end)) { - warn_timeout(); - return; - } - yield(); - } -} - -static void -ohci_free_pipes(struct usb_ohci_s *cntl) -{ - dprintf(7, "ohci_free_pipes %p\n", cntl); - - u32 creg = readl(&cntl->regs->control); - if (creg & (OHCI_CTRL_CLE|OHCI_CTRL_BLE)) { - writel(&cntl->regs->control, creg & ~(OHCI_CTRL_CLE|OHCI_CTRL_BLE)); - ohci_waittick(cntl->regs); - } - - u32 *pos = &cntl->regs->ed_controlhead; - for (;;) { - struct ohci_ed *next = (void*)*pos; - if (!next) - break; - struct ohci_pipe *pipe = container_of(next, struct ohci_pipe, ed); - if (usb_is_freelist(&cntl->usb, &pipe->pipe)) { - *pos = next->hwNextED; - free(pipe); - } else { - pos = &next->hwNextED; - } - } - - writel(&cntl->regs->ed_controlcurrent, 0); - writel(&cntl->regs->ed_bulkcurrent, 0); - writel(&cntl->regs->control, creg); - cntl->usb.freelist = NULL; -} - -static int -start_ohci(struct usb_ohci_s *cntl, struct ohci_hcca *hcca) -{ - u32 oldfminterval = readl(&cntl->regs->fminterval); - u32 oldrwc = readl(&cntl->regs->control) & OHCI_CTRL_RWC; - - // XXX - check if already running? - - // Do reset - writel(&cntl->regs->control, OHCI_USB_RESET | oldrwc); - readl(&cntl->regs->control); // flush writes - msleep(USB_TIME_DRSTR); - - // Do software init (min 10us, max 2ms) - u32 end = timer_calc_usec(10); - writel(&cntl->regs->cmdstatus, OHCI_HCR); - for (;;) { - u32 status = readl(&cntl->regs->cmdstatus); - if (! status & OHCI_HCR) - break; - if (timer_check(end)) { - warn_timeout(); - return -1; - } - } - - // Init memory - writel(&cntl->regs->ed_controlhead, 0); - writel(&cntl->regs->ed_bulkhead, 0); - writel(&cntl->regs->hcca, (u32)hcca); - - // Init fminterval - u32 fi = oldfminterval & 0x3fff; - writel(&cntl->regs->fminterval - , (((oldfminterval & FIT) ^ FIT) - | fi | (((6 * (fi - 210)) / 7) << 16))); - writel(&cntl->regs->periodicstart, ((9 * fi) / 10) & 0x3fff); - readl(&cntl->regs->control); // flush writes - - // XXX - verify that fminterval was setup correctly. - - // Go into operational state - writel(&cntl->regs->control - , (OHCI_CTRL_CBSR | OHCI_CTRL_CLE | OHCI_CTRL_BLE | OHCI_CTRL_PLE - | OHCI_USB_OPER | oldrwc)); - readl(&cntl->regs->control); // flush writes - - return 0; -} - -static void -stop_ohci(struct usb_ohci_s *cntl) -{ - u32 oldrwc = readl(&cntl->regs->control) & OHCI_CTRL_RWC; - writel(&cntl->regs->control, oldrwc); - readl(&cntl->regs->control); // flush writes -} - -static void -configure_ohci(void *data) -{ - struct usb_ohci_s *cntl = data; - - // Allocate memory - struct ohci_hcca *hcca = memalign_high(256, sizeof(*hcca)); - struct ohci_ed *intr_ed = malloc_high(sizeof(*intr_ed)); - if (!hcca || !intr_ed) { - warn_noalloc(); - goto free; - } - memset(hcca, 0, sizeof(*hcca)); - memset(intr_ed, 0, sizeof(*intr_ed)); - intr_ed->hwINFO = ED_SKIP; - int i; - for (i=0; i<ARRAY_SIZE(hcca->int_table); i++) - hcca->int_table[i] = (u32)intr_ed; - - int ret = start_ohci(cntl, hcca); - if (ret) - goto err; - - int count = check_ohci_ports(cntl); - ohci_free_pipes(cntl); - if (! count) - goto err; - return; - -err: - stop_ohci(cntl); -free: - free(hcca); - free(intr_ed); -} - -static void -ohci_controller_setup(struct pci_device *pci) -{ - struct ohci_regs *regs = pci_enable_membar(pci, PCI_BASE_ADDRESS_0); - if (!regs) - return; - - struct usb_ohci_s *cntl = malloc_tmphigh(sizeof(*cntl)); - if (!cntl) { - warn_noalloc(); - return; - } - memset(cntl, 0, sizeof(*cntl)); - cntl->usb.pci = pci; - cntl->usb.type = USB_TYPE_OHCI; - cntl->regs = regs; - - dprintf(1, "OHCI init on dev %pP (regs=%p)\n", pci, cntl->regs); - - pci_enable_busmaster(pci); - - // XXX - check for and disable SMM control? - - // Disable interrupts - writel(&cntl->regs->intrdisable, ~0); - writel(&cntl->regs->intrstatus, ~0); - - run_thread(configure_ohci, cntl); -} - -void -ohci_setup(void) -{ - if (! CONFIG_USB_OHCI) - return; - struct pci_device *pci; - foreachpci(pci) { - if (pci_classprog(pci) == PCI_CLASS_SERIAL_USB_OHCI) - ohci_controller_setup(pci); - } -} - - -/**************************************************************** - * End point communication - ****************************************************************/ - -// Setup fields in ed -static void -ohci_desc2pipe(struct ohci_pipe *pipe, struct usbdevice_s *usbdev - , struct usb_endpoint_descriptor *epdesc) -{ - usb_desc2pipe(&pipe->pipe, usbdev, epdesc); - pipe->ed.hwINFO = (ED_SKIP | usbdev->devaddr | (pipe->pipe.ep << 7) - | (epdesc->wMaxPacketSize << 16) - | (usbdev->speed ? ED_LOWSPEED : 0)); - struct usb_ohci_s *cntl = container_of( - usbdev->hub->cntl, struct usb_ohci_s, usb); - pipe->regs = cntl->regs; -} - -static struct usb_pipe * -ohci_alloc_intr_pipe(struct usbdevice_s *usbdev - , struct usb_endpoint_descriptor *epdesc) -{ - struct usb_ohci_s *cntl = container_of( - usbdev->hub->cntl, struct usb_ohci_s, usb); - int frameexp = usb_get_period(usbdev, epdesc); - dprintf(7, "ohci_alloc_intr_pipe %p %d\n", &cntl->usb, frameexp); - - if (frameexp > 5) - frameexp = 5; - int maxpacket = epdesc->wMaxPacketSize; - // Determine number of entries needed for 2 timer ticks. - int ms = 1<<frameexp; - int count = DIV_ROUND_UP(ticks_to_ms(2), ms) + 1; - struct ohci_pipe *pipe = malloc_low(sizeof(*pipe)); - struct ohci_td *tds = malloc_low(sizeof(*tds) * count); - void *data = malloc_low(maxpacket * count); - if (!pipe || !tds || !data) - goto err; - memset(pipe, 0, sizeof(*pipe)); - ohci_desc2pipe(pipe, usbdev, epdesc); - pipe->ed.hwINFO &= ~ED_SKIP; - pipe->data = data; - pipe->count = count; - pipe->tds = tds; - - struct ohci_ed *ed = &pipe->ed; - ed->hwHeadP = (u32)&tds[0]; - ed->hwTailP = (u32)&tds[count-1]; - - int i; - for (i=0; i<count-1; i++) { - tds[i].hwINFO = TD_DP_IN | TD_T_TOGGLE | TD_CC; - tds[i].hwCBP = (u32)data + maxpacket * i; - tds[i].hwNextTD = (u32)&tds[i+1]; - tds[i].hwBE = tds[i].hwCBP + maxpacket - 1; - } - - // Add to interrupt schedule. - struct ohci_hcca *hcca = (void*)cntl->regs->hcca; - if (frameexp == 0) { - // Add to existing interrupt entry. - struct ohci_ed *intr_ed = (void*)hcca->int_table[0]; - ed->hwNextED = intr_ed->hwNextED; - barrier(); - intr_ed->hwNextED = (u32)ed; - } else { - int startpos = 1<<(frameexp-1); - ed->hwNextED = hcca->int_table[startpos]; - barrier(); - for (i=startpos; i<ARRAY_SIZE(hcca->int_table); i+=ms) - hcca->int_table[i] = (u32)ed; - } - - return &pipe->pipe; - -err: - free(pipe); - free(tds); - free(data); - return NULL; -} - -struct usb_pipe * -ohci_realloc_pipe(struct usbdevice_s *usbdev, struct usb_pipe *upipe - , struct usb_endpoint_descriptor *epdesc) -{ - if (! CONFIG_USB_OHCI) - return NULL; - usb_add_freelist(upipe); - if (!epdesc) - return NULL; - u8 eptype = epdesc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK; - if (eptype == USB_ENDPOINT_XFER_INT) - return ohci_alloc_intr_pipe(usbdev, epdesc); - struct usb_ohci_s *cntl = container_of( - usbdev->hub->cntl, struct usb_ohci_s, usb); - dprintf(7, "ohci_alloc_async_pipe %p\n", &cntl->usb); - - struct usb_pipe *usbpipe = usb_get_freelist(&cntl->usb, eptype); - if (usbpipe) { - // Use previously allocated pipe. - struct ohci_pipe *pipe = container_of(usbpipe, struct ohci_pipe, pipe); - ohci_desc2pipe(pipe, usbdev, epdesc); - return usbpipe; - } - - // Allocate a new queue head. - struct ohci_pipe *pipe; - if (eptype == USB_ENDPOINT_XFER_CONTROL) - pipe = malloc_tmphigh(sizeof(*pipe)); - else - pipe = malloc_low(sizeof(*pipe)); - if (!pipe) { - warn_noalloc(); - return NULL; - } - memset(pipe, 0, sizeof(*pipe)); - ohci_desc2pipe(pipe, usbdev, epdesc); - - // Add queue head to controller list. - u32 *head = &cntl->regs->ed_controlhead; - if (eptype != USB_ENDPOINT_XFER_CONTROL) - head = &cntl->regs->ed_bulkhead; - pipe->ed.hwNextED = *head; - barrier(); - *head = (u32)&pipe->ed; - return &pipe->pipe; -} - -static int -wait_ed(struct ohci_ed *ed, int timeout) -{ - u32 end = timer_calc(timeout); - for (;;) { - if ((ed->hwHeadP & ~(ED_C|ED_H)) == ed->hwTailP) - return 0; - if (timer_check(end)) { - warn_timeout(); - dprintf(1, "ohci ed info=%x tail=%x head=%x next=%x\n" - , ed->hwINFO, ed->hwTailP, ed->hwHeadP, ed->hwNextED); - return -1; - } - yield(); - } -} - -#define STACKOTDS 18 -#define OHCI_TD_ALIGN 16 - -int -ohci_send_pipe(struct usb_pipe *p, int dir, const void *cmd - , void *data, int datasize) -{ - ASSERT32FLAT(); - if (! CONFIG_USB_OHCI) - return -1; - dprintf(7, "ohci_send_pipe %p\n", p); - struct ohci_pipe *pipe = container_of(p, struct ohci_pipe, pipe); - - // Allocate tds on stack (with required alignment) - u8 tdsbuf[sizeof(struct ohci_td) * STACKOTDS + OHCI_TD_ALIGN - 1]; - struct ohci_td *tds = (void*)ALIGN((u32)tdsbuf, OHCI_TD_ALIGN), *td = tds; - memset(tds, 0, sizeof(*tds) * STACKOTDS); - - // Setup transfer descriptors - u16 maxpacket = pipe->pipe.maxpacket; - u32 toggle = 0, statuscmd = OHCI_BLF; - if (cmd) { - // Send setup pid on control transfers - td->hwINFO = TD_DP_SETUP | TD_T_DATA0 | TD_CC; - td->hwCBP = (u32)cmd; - td->hwNextTD = (u32)&td[1]; - td->hwBE = (u32)cmd + USB_CONTROL_SETUP_SIZE - 1; - td++; - toggle = TD_T_DATA1; - statuscmd = OHCI_CLF; - } - u32 dest = (u32)data, dataend = dest + datasize; - while (dest < dataend) { - // Send data pids - if (td >= &tds[STACKOTDS]) { - warn_noalloc(); - return -1; - } - int maxtransfer = 2*PAGE_SIZE - (dest & (PAGE_SIZE-1)); - int transfer = dataend - dest; - if (transfer > maxtransfer) - transfer = ALIGN_DOWN(maxtransfer, maxpacket); - td->hwINFO = (dir ? TD_DP_IN : TD_DP_OUT) | toggle | TD_CC; - td->hwCBP = dest; - td->hwNextTD = (u32)&td[1]; - td->hwBE = dest + transfer - 1; - td++; - dest += transfer; - } - if (cmd) { - // Send status pid on control transfers - if (td >= &tds[STACKOTDS]) { - warn_noalloc(); - return -1; - } - td->hwINFO = (dir ? TD_DP_OUT : TD_DP_IN) | TD_T_DATA1 | TD_CC; - td->hwCBP = 0; - td->hwNextTD = (u32)&td[1]; - td->hwBE = 0; - td++; - } - - // Transfer data - pipe->ed.hwHeadP = (u32)tds | (pipe->ed.hwHeadP & ED_C); - pipe->ed.hwTailP = (u32)td; - barrier(); - pipe->ed.hwINFO &= ~ED_SKIP; - writel(&pipe->regs->cmdstatus, statuscmd); - - int ret = wait_ed(&pipe->ed, usb_xfer_time(p, datasize)); - pipe->ed.hwINFO |= ED_SKIP; - if (ret) - ohci_waittick(pipe->regs); - return ret; -} - -int -ohci_poll_intr(struct usb_pipe *p, void *data) -{ - ASSERT16(); - if (! CONFIG_USB_OHCI) - return -1; - - struct ohci_pipe *pipe = container_of(p, struct ohci_pipe, pipe); - struct ohci_td *tds = GET_LOWFLAT(pipe->tds); - struct ohci_td *head = (void*)(GET_LOWFLAT(pipe->ed.hwHeadP) & ~(ED_C|ED_H)); - struct ohci_td *tail = (void*)GET_LOWFLAT(pipe->ed.hwTailP); - int count = GET_LOWFLAT(pipe->count); - int pos = (tail - tds + 1) % count; - struct ohci_td *next = &tds[pos]; - if (head == next) - // No intrs found. - return -1; - // XXX - check for errors. - - // Copy data. - int maxpacket = GET_LOWFLAT(pipe->pipe.maxpacket); - void *pipedata = GET_LOWFLAT((pipe->data)); - void *intrdata = pipedata + maxpacket * pos; - memcpy_far(GET_SEG(SS), data, SEG_LOW, LOWFLAT2LOW(intrdata), maxpacket); - - // Reenable this td. - SET_LOWFLAT(tail->hwINFO, TD_DP_IN | TD_T_TOGGLE | TD_CC); - intrdata = pipedata + maxpacket * (tail-tds); - SET_LOWFLAT(tail->hwCBP, (u32)intrdata); - SET_LOWFLAT(tail->hwNextTD, (u32)next); - SET_LOWFLAT(tail->hwBE, (u32)intrdata + maxpacket - 1); - barrier(); - SET_LOWFLAT(pipe->ed.hwTailP, (u32)next); - - return 0; -} diff --git a/payloads/external/SeaBIOS/src/hw/usb-ohci.h b/payloads/external/SeaBIOS/src/hw/usb-ohci.h deleted file mode 100644 index 5a275a33..00000000 --- a/payloads/external/SeaBIOS/src/hw/usb-ohci.h +++ /dev/null @@ -1,144 +0,0 @@ -#ifndef __USB_OHCI_H -#define __USB_OHCI_H - -// usb-ohci.c -void ohci_setup(void); -struct usbdevice_s; -struct usb_endpoint_descriptor; -struct usb_pipe; -struct usb_pipe *ohci_realloc_pipe(struct usbdevice_s *usbdev - , struct usb_pipe *upipe - , struct usb_endpoint_descriptor *epdesc); -int ohci_send_pipe(struct usb_pipe *p, int dir, const void *cmd - , void *data, int datasize); -int ohci_poll_intr(struct usb_pipe *p, void *data); - - -/**************************************************************** - * ohci structs and flags - ****************************************************************/ - -struct ohci_ed { - u32 hwINFO; - u32 hwTailP; - u32 hwHeadP; - u32 hwNextED; -} PACKED; - -#define ED_ISO (1 << 15) -#define ED_SKIP (1 << 14) -#define ED_LOWSPEED (1 << 13) -#define ED_OUT (0x01 << 11) -#define ED_IN (0x02 << 11) - -#define ED_C (0x02) -#define ED_H (0x01) - -struct ohci_td { - u32 hwINFO; - u32 hwCBP; - u32 hwNextTD; - u32 hwBE; -} PACKED; - -#define TD_CC 0xf0000000 -#define TD_CC_GET(td_p) ((td_p >>28) & 0x0f) -#define TD_DI 0x00E00000 - -#define TD_DONE 0x00020000 -#define TD_ISO 0x00010000 - -#define TD_EC 0x0C000000 -#define TD_T 0x03000000 -#define TD_T_DATA0 0x02000000 -#define TD_T_DATA1 0x03000000 -#define TD_T_TOGGLE 0x00000000 -#define TD_DP 0x00180000 -#define TD_DP_SETUP 0x00000000 -#define TD_DP_IN 0x00100000 -#define TD_DP_OUT 0x00080000 - -#define TD_R 0x00040000 - -struct ohci_hcca { - u32 int_table[32]; - u32 frame_no; - u32 done_head; - u8 reserved[120]; -} PACKED; - -struct ohci_regs { - u32 revision; - u32 control; - u32 cmdstatus; - u32 intrstatus; - u32 intrenable; - u32 intrdisable; - - u32 hcca; - u32 ed_periodcurrent; - u32 ed_controlhead; - u32 ed_controlcurrent; - u32 ed_bulkhead; - u32 ed_bulkcurrent; - u32 donehead; - - u32 fminterval; - u32 fmremaining; - u32 fmnumber; - u32 periodicstart; - u32 lsthresh; - - u32 roothub_a; - u32 roothub_b; - u32 roothub_status; - u32 roothub_portstatus[15]; -} PACKED; - -#define OHCI_CTRL_CBSR (3 << 0) -#define OHCI_CTRL_PLE (1 << 2) -#define OHCI_CTRL_CLE (1 << 4) -#define OHCI_CTRL_BLE (1 << 5) -#define OHCI_CTRL_HCFS (3 << 6) -# define OHCI_USB_RESET (0 << 6) -# define OHCI_USB_OPER (2 << 6) -#define OHCI_CTRL_RWC (1 << 9) - -#define OHCI_HCR (1 << 0) -#define OHCI_CLF (1 << 1) -#define OHCI_BLF (1 << 2) - -#define OHCI_INTR_MIE (1 << 31) - -#define RH_PS_CCS 0x00000001 -#define RH_PS_PES 0x00000002 -#define RH_PS_PSS 0x00000004 -#define RH_PS_POCI 0x00000008 -#define RH_PS_PRS 0x00000010 -#define RH_PS_PPS 0x00000100 -#define RH_PS_LSDA 0x00000200 -#define RH_PS_CSC 0x00010000 -#define RH_PS_PESC 0x00020000 -#define RH_PS_PSSC 0x00040000 -#define RH_PS_OCIC 0x00080000 -#define RH_PS_PRSC 0x00100000 - -#define RH_HS_LPS 0x00000001 -#define RH_HS_OCI 0x00000002 -#define RH_HS_DRWE 0x00008000 -#define RH_HS_LPSC 0x00010000 -#define RH_HS_OCIC 0x00020000 -#define RH_HS_CRWE 0x80000000 - -#define RH_B_DR 0x0000ffff -#define RH_B_PPCM 0xffff0000 - -#define RH_A_NDP (0xff << 0) -#define RH_A_PSM (1 << 8) -#define RH_A_NPS (1 << 9) -#define RH_A_DT (1 << 10) -#define RH_A_OCPM (1 << 11) -#define RH_A_NOCP (1 << 12) -#define RH_A_POTPGT (0xff << 24) - -#endif // usb-ohci.h diff --git a/payloads/external/SeaBIOS/src/hw/usb-uas.c b/payloads/external/SeaBIOS/src/hw/usb-uas.c deleted file mode 100644 index 6a8decc0..00000000 --- a/payloads/external/SeaBIOS/src/hw/usb-uas.c +++ /dev/null @@ -1,289 +0,0 @@ -// Code for handling usb attached scsi devices. -// -// only usb 2.0 for now. -// -// once we have xhci driver with usb 3.0 support this must -// be updated to use usb3 streams so booting from usb3 -// devices actually works. -// -// Authors: -// Gerd Hoffmann <kraxel@redhat.com> -// -// based on usb-msc.c which is written by: -// Kevin O'Connor <kevin@koconnor.net> -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "biosvar.h" // GET_GLOBALFLAT -#include "block.h" // DTYPE_USB -#include "blockcmd.h" // cdb_read -#include "config.h" // CONFIG_USB_UAS -#include "malloc.h" // free -#include "output.h" // dprintf -#include "std/disk.h" // DISK_RET_SUCCESS -#include "string.h" // memset -#include "usb.h" // struct usb_s -#include "usb-uas.h" // usb_uas_init -#include "util.h" // bootprio_find_usb - -#define UAS_UI_COMMAND 0x01 -#define UAS_UI_SENSE 0x03 -#define UAS_UI_RESPONSE 0x04 -#define UAS_UI_TASK_MGMT 0x05 -#define UAS_UI_READ_READY 0x06 -#define UAS_UI_WRITE_READY 0x07 - -#define UAS_PIPE_ID_COMMAND 0x01 -#define UAS_PIPE_ID_STATUS 0x02 -#define UAS_PIPE_ID_DATA_IN 0x03 -#define UAS_PIPE_ID_DATA_OUT 0x04 - -typedef struct { - u8 id; - u8 reserved; - u16 tag; -} PACKED uas_ui_header; - -typedef struct { - u8 prio_taskattr; /* 6:3 priority, 2:0 task attribute */ - u8 reserved_1; - u8 add_cdb_length; /* 7:2 additional adb length (dwords) */ - u8 reserved_2; - u8 lun[8]; - u8 cdb[16]; - u8 add_cdb[]; -} PACKED uas_ui_command; - -typedef struct { - u16 status_qualifier; - u8 status; - u8 reserved[7]; - u16 sense_length; - u8 sense_data[18]; -} PACKED uas_ui_sense; - -typedef struct { - u16 add_response_info; - u8 response_code; -} PACKED uas_ui_response; - -typedef struct { - u8 function; - u8 reserved; - u16 task_tag; - u8 lun[8]; -} PACKED uas_ui_task_mgmt; - -typedef struct { - uas_ui_header hdr; - union { - uas_ui_command command; - uas_ui_sense sense; - uas_ui_task_mgmt task; - uas_ui_response response; - }; -} PACKED uas_ui; - -struct uasdrive_s { - struct drive_s drive; - struct usbdevice_s *usbdev; - struct usb_pipe *command, *status, *data_in, *data_out; - u32 lun; -}; - -int -uas_process_op(struct disk_op_s *op) -{ - if (!CONFIG_USB_UAS) - return DISK_RET_EBADTRACK; - - struct uasdrive_s *drive_gf = container_of( - op->drive_fl, struct uasdrive_s, drive); - - uas_ui ui; - memset(&ui, 0, sizeof(ui)); - ui.hdr.id = UAS_UI_COMMAND; - ui.hdr.tag = 0xdead; - ui.command.lun[1] = GET_GLOBALFLAT(drive_gf->lun); - int blocksize = scsi_fill_cmd(op, ui.command.cdb, sizeof(ui.command.cdb)); - if (blocksize < 0) - return default_process_op(op); - int ret = usb_send_bulk(GET_GLOBALFLAT(drive_gf->command), - USB_DIR_OUT, MAKE_FLATPTR(GET_SEG(SS), &ui), - sizeof(ui.hdr) + sizeof(ui.command)); - if (ret) { - dprintf(1, "uas: command send fail"); - goto fail; - } - - memset(&ui, 0xff, sizeof(ui)); - ret = usb_send_bulk(GET_GLOBALFLAT(drive_gf->status), - USB_DIR_IN, MAKE_FLATPTR(GET_SEG(SS), &ui), sizeof(ui)); - if (ret) { - dprintf(1, "uas: status recv fail"); - goto fail; - } - - switch (ui.hdr.id) { - case UAS_UI_SENSE: - goto have_sense; - case UAS_UI_READ_READY: - ret = usb_send_bulk(GET_GLOBALFLAT(drive_gf->data_in), - USB_DIR_IN, op->buf_fl, op->count * blocksize); - if (ret) { - dprintf(1, "uas: data read fail"); - goto fail; - } - break; - case UAS_UI_WRITE_READY: - ret = usb_send_bulk(GET_GLOBALFLAT(drive_gf->data_out), - USB_DIR_OUT, op->buf_fl, op->count * blocksize); - if (ret) { - dprintf(1, "uas: data write fail"); - goto fail; - } - break; - default: - dprintf(1, "uas: unknown status ui id %d", ui.hdr.id); - goto fail; - } - - memset(&ui, 0xff, sizeof(ui)); - ret = usb_send_bulk(GET_GLOBALFLAT(drive_gf->status), - USB_DIR_IN, MAKE_FLATPTR(GET_SEG(SS), &ui), sizeof(ui)); - if (ret) { - dprintf(1, "uas: status recv fail"); - goto fail; - } - if (ui.hdr.id != UAS_UI_SENSE) { - dprintf(1, "uas: expected sense ui, got ui id %d", ui.hdr.id); - goto fail; - } - -have_sense: - if (ui.sense.status == 0) { - return DISK_RET_SUCCESS; - } - -fail: - return DISK_RET_EBADTRACK; -} - -static void -uas_init_lun(struct uasdrive_s *drive, struct usbdevice_s *usbdev, - struct usb_pipe *command, struct usb_pipe *status, - struct usb_pipe *data_in, struct usb_pipe *data_out, - u32 lun) -{ - memset(drive, 0, sizeof(*drive)); - if (usb_32bit_pipe(data_in)) - drive->drive.type = DTYPE_UAS_32; - else - drive->drive.type = DTYPE_UAS; - drive->usbdev = usbdev; - drive->command = command; - drive->status = status; - drive->data_in = data_in; - drive->data_out = data_out; - drive->lun = lun; -} - -static int -uas_add_lun(u32 lun, struct drive_s *tmpl_drv) -{ - struct uasdrive_s *tmpl_lun = - container_of(tmpl_drv, struct uasdrive_s, drive); - struct uasdrive_s *drive = malloc_fseg(sizeof(*drive)); - if (!drive) { - warn_noalloc(); - return -1; - } - uas_init_lun(drive, tmpl_lun->usbdev, - tmpl_lun->command, tmpl_lun->status, - tmpl_lun->data_in, tmpl_lun->data_out, - lun); - - int prio = bootprio_find_usb(drive->usbdev, drive->lun); - int ret = scsi_drive_setup(&drive->drive, "USB UAS", prio); - if (ret) { - free(drive); - return -1; - } - return 0; -} - -int -usb_uas_setup(struct usbdevice_s *usbdev) -{ - if (!CONFIG_USB_UAS) - return -1; - - // Verify right kind of device - struct usb_interface_descriptor *iface = usbdev->iface; - if (iface->bInterfaceSubClass != US_SC_SCSI || - iface->bInterfaceProtocol != US_PR_UAS) { - dprintf(1, "Unsupported UAS device (subclass=%02x proto=%02x)\n" - , iface->bInterfaceSubClass, iface->bInterfaceProtocol); - return -1; - } - - /* find & allocate pipes */ - struct usb_endpoint_descriptor *ep = NULL; - struct usb_pipe *command = NULL; - struct usb_pipe *status = NULL; - struct usb_pipe *data_in = NULL; - struct usb_pipe *data_out = NULL; - u8 *desc = (u8*)iface; - while (desc) { - desc += desc[0]; - switch (desc[1]) { - case USB_DT_ENDPOINT: - ep = (void*)desc; - break; - case USB_DT_ENDPOINT_COMPANION: - /* No support (yet) for usb3 streams */ - dprintf(1, "Superspeed UAS devices not supported (yet)\n"); - goto fail; - case 0x24: - switch (desc[2]) { - case UAS_PIPE_ID_COMMAND: - command = usb_alloc_pipe(usbdev, ep); - break; - case UAS_PIPE_ID_STATUS: - status = usb_alloc_pipe(usbdev, ep); - break; - case UAS_PIPE_ID_DATA_IN: - data_in = usb_alloc_pipe(usbdev, ep); - break; - case UAS_PIPE_ID_DATA_OUT: - data_out = usb_alloc_pipe(usbdev, ep); - break; - default: - goto fail; - } - break; - default: - desc = NULL; - break; - } - } - if (!command || !status || !data_in || !data_out) - goto fail; - - struct uasdrive_s lun0; - uas_init_lun(&lun0, usbdev, command, status, data_in, data_out, 0); - int ret = scsi_rep_luns_scan(&lun0.drive, uas_add_lun); - if (ret <= 0) { - dprintf(1, "Unable to configure UAS drive.\n"); - goto fail; - } - - return 0; - -fail: - usb_free_pipe(usbdev, command); - usb_free_pipe(usbdev, status); - usb_free_pipe(usbdev, data_in); - usb_free_pipe(usbdev, data_out); - return -1; -} diff --git a/payloads/external/SeaBIOS/src/hw/usb-uas.h b/payloads/external/SeaBIOS/src/hw/usb-uas.h deleted file mode 100644 index 8b2f810e..00000000 --- a/payloads/external/SeaBIOS/src/hw/usb-uas.h +++ /dev/null @@ -1,9 +0,0 @@ -#ifndef __USB_UAS_H -#define __USB_UAS_H - -struct disk_op_s; -int uas_process_op(struct disk_op_s *op); -struct usbdevice_s; -int usb_uas_setup(struct usbdevice_s *usbdev); - -#endif /* __USB_UAS_H */ diff --git a/payloads/external/SeaBIOS/src/hw/usb-uhci.c b/payloads/external/SeaBIOS/src/hw/usb-uhci.c deleted file mode 100644 index 075ed02c..00000000 --- a/payloads/external/SeaBIOS/src/hw/usb-uhci.c +++ /dev/null @@ -1,571 +0,0 @@ -// Code for handling UHCI USB controllers. -// -// Copyright (C) 2009 Kevin O'Connor <kevin@koconnor.net> -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "biosvar.h" // GET_LOWFLAT -#include "config.h" // CONFIG_* -#include "malloc.h" // free -#include "output.h" // dprintf -#include "pci.h" // pci_config_writew -#include "pcidevice.h" // foreachpci -#include "pci_ids.h" // PCI_CLASS_SERIAL_USB_UHCI -#include "pci_regs.h" // PCI_BASE_ADDRESS_4 -#include "string.h" // memset -#include "usb.h" // struct usb_s -#include "usb-ehci.h" // ehci_wait_controllers -#include "usb-uhci.h" // USBLEGSUP -#include "util.h" // msleep -#include "x86.h" // outw - -struct usb_uhci_s { - struct usb_s usb; - u16 iobase; - struct uhci_qh *control_qh; - struct uhci_framelist *framelist; -}; - -struct uhci_pipe { - struct uhci_qh qh; - struct uhci_td *next_td; - struct usb_pipe pipe; - u16 iobase; - u8 toggle; -}; - - -/**************************************************************** - * Root hub - ****************************************************************/ - -// Check if device attached to a given port -static int -uhci_hub_detect(struct usbhub_s *hub, u32 port) -{ - struct usb_uhci_s *cntl = container_of(hub->cntl, struct usb_uhci_s, usb); - u16 ioport = cntl->iobase + USBPORTSC1 + port * 2; - u16 status = inw(ioport); - if (!(status & USBPORTSC_CCS)) - // No device found. - return 0; - - // XXX - if just powered up, need to wait for USB_TIME_ATTDB? - - // Begin reset on port - outw(USBPORTSC_PR, ioport); - msleep(USB_TIME_DRSTR); - return 1; -} - -// Reset device on port -static int -uhci_hub_reset(struct usbhub_s *hub, u32 port) -{ - struct usb_uhci_s *cntl = container_of(hub->cntl, struct usb_uhci_s, usb); - u16 ioport = cntl->iobase + USBPORTSC1 + port * 2; - - // Finish reset on port - outw(0, ioport); - udelay(6); // 64 high-speed bit times - u16 status = inw(ioport); - if (!(status & USBPORTSC_CCS)) - // No longer connected - return -1; - outw(USBPORTSC_PE, ioport); - return !!(status & USBPORTSC_LSDA); -} - -// Disable port -static void -uhci_hub_disconnect(struct usbhub_s *hub, u32 port) -{ - struct usb_uhci_s *cntl = container_of(hub->cntl, struct usb_uhci_s, usb); - u16 ioport = cntl->iobase + USBPORTSC1 + port * 2; - outw(0, ioport); -} - -static struct usbhub_op_s uhci_HubOp = { - .detect = uhci_hub_detect, - .reset = uhci_hub_reset, - .disconnect = uhci_hub_disconnect, -}; - -// Find any devices connected to the root hub. -static int -check_uhci_ports(struct usb_uhci_s *cntl) -{ - ASSERT32FLAT(); - // Wait for ehci init - in case this is a "companion controller" - ehci_wait_controllers(); - - struct usbhub_s hub; - memset(&hub, 0, sizeof(hub)); - hub.cntl = &cntl->usb; - hub.portcount = 2; - hub.op = &uhci_HubOp; - usb_enumerate(&hub); - return hub.devcount; -} - - -/**************************************************************** - * Setup - ****************************************************************/ - -// Wait for next USB frame to start - for ensuring safe memory release. -static void -uhci_waittick(u16 iobase) -{ - barrier(); - u16 startframe = inw(iobase + USBFRNUM); - u32 end = timer_calc(1000 * 5); - for (;;) { - if (inw(iobase + USBFRNUM) != startframe) - break; - if (timer_check(end)) { - warn_timeout(); - return; - } - yield(); - } -} - -static void -uhci_free_pipes(struct usb_uhci_s *cntl) -{ - dprintf(7, "uhci_free_pipes %p\n", cntl); - - struct uhci_qh *pos = (void*)(cntl->framelist->links[0] & ~UHCI_PTR_BITS); - for (;;) { - u32 link = pos->link; - if (link == UHCI_PTR_TERM) - break; - struct uhci_qh *next = (void*)(link & ~UHCI_PTR_BITS); - struct uhci_pipe *pipe = container_of(next, struct uhci_pipe, qh); - if (usb_is_freelist(&cntl->usb, &pipe->pipe)) - pos->link = next->link; - else - pos = next; - } - uhci_waittick(cntl->iobase); - for (;;) { - struct usb_pipe *usbpipe = cntl->usb.freelist; - if (!usbpipe) - break; - cntl->usb.freelist = usbpipe->freenext; - struct uhci_pipe *pipe = container_of(usbpipe, struct uhci_pipe, pipe); - free(pipe); - } -} - -static void -reset_uhci(struct usb_uhci_s *cntl, u16 bdf) -{ - // XXX - don't reset if not needed. - - // Reset PIRQ and SMI - pci_config_writew(bdf, USBLEGSUP, USBLEGSUP_RWC); - - // Reset the HC - outw(USBCMD_HCRESET, cntl->iobase + USBCMD); - udelay(5); - - // Disable interrupts and commands (just to be safe). - outw(0, cntl->iobase + USBINTR); - outw(0, cntl->iobase + USBCMD); -} - -static void -configure_uhci(void *data) -{ - struct usb_uhci_s *cntl = data; - - // Allocate ram for schedule storage - struct uhci_td *term_td = malloc_high(sizeof(*term_td)); - struct uhci_framelist *fl = memalign_high(sizeof(*fl), sizeof(*fl)); - struct uhci_pipe *intr_pipe = malloc_high(sizeof(*intr_pipe)); - struct uhci_pipe *term_pipe = malloc_high(sizeof(*term_pipe)); - if (!term_td || !fl || !intr_pipe || !term_pipe) { - warn_noalloc(); - goto fail; - } - - // Work around for PIIX errata - memset(term_td, 0, sizeof(*term_td)); - term_td->link = UHCI_PTR_TERM; - term_td->token = (uhci_explen(0) | (0x7f << TD_TOKEN_DEVADDR_SHIFT) - | USB_PID_IN); - memset(term_pipe, 0, sizeof(*term_pipe)); - term_pipe->qh.element = (u32)term_td; - term_pipe->qh.link = UHCI_PTR_TERM; - term_pipe->pipe.cntl = &cntl->usb; - - // Set schedule to point to primary intr queue head - memset(intr_pipe, 0, sizeof(*intr_pipe)); - intr_pipe->qh.element = UHCI_PTR_TERM; - intr_pipe->qh.link = (u32)&term_pipe->qh | UHCI_PTR_QH; - intr_pipe->pipe.cntl = &cntl->usb; - int i; - for (i=0; i<ARRAY_SIZE(fl->links); i++) - fl->links[i] = (u32)&intr_pipe->qh | UHCI_PTR_QH; - cntl->framelist = fl; - cntl->control_qh = &intr_pipe->qh; - barrier(); - - // Set the frame length to the default: 1 ms exactly - outb(USBSOF_DEFAULT, cntl->iobase + USBSOF); - - // Store the frame list base address - outl((u32)fl->links, cntl->iobase + USBFLBASEADD); - - // Set the current frame number - outw(0, cntl->iobase + USBFRNUM); - - // Mark as configured and running with a 64-byte max packet. - outw(USBCMD_RS | USBCMD_CF | USBCMD_MAXP, cntl->iobase + USBCMD); - - // Find devices - int count = check_uhci_ports(cntl); - uhci_free_pipes(cntl); - if (count) - // Success - return; - - // No devices found - shutdown and free controller. - outw(0, cntl->iobase + USBCMD); -fail: - free(term_td); - free(fl); - free(intr_pipe); - free(term_pipe); - free(cntl); -} - -static void -uhci_controller_setup(struct pci_device *pci) -{ - u16 iobase = pci_enable_iobar(pci, PCI_BASE_ADDRESS_4); - if (!iobase) - return; - - struct usb_uhci_s *cntl = malloc_tmphigh(sizeof(*cntl)); - if (!cntl) { - warn_noalloc(); - return; - } - memset(cntl, 0, sizeof(*cntl)); - cntl->usb.pci = pci; - cntl->usb.type = USB_TYPE_UHCI; - cntl->iobase = iobase; - - dprintf(1, "UHCI init on dev %pP (io=%x)\n", pci, cntl->iobase); - - pci_enable_busmaster(pci); - - reset_uhci(cntl, pci->bdf); - - run_thread(configure_uhci, cntl); -} - -void -uhci_setup(void) -{ - if (! CONFIG_USB_UHCI) - return; - struct pci_device *pci; - foreachpci(pci) { - if (pci_classprog(pci) == PCI_CLASS_SERIAL_USB_UHCI) - uhci_controller_setup(pci); - } -} - - -/**************************************************************** - * End point communication - ****************************************************************/ - -static struct usb_pipe * -uhci_alloc_intr_pipe(struct usbdevice_s *usbdev - , struct usb_endpoint_descriptor *epdesc) -{ - struct usb_uhci_s *cntl = container_of( - usbdev->hub->cntl, struct usb_uhci_s, usb); - int frameexp = usb_get_period(usbdev, epdesc); - dprintf(7, "uhci_alloc_intr_pipe %p %d\n", &cntl->usb, frameexp); - - if (frameexp > 10) - frameexp = 10; - int maxpacket = epdesc->wMaxPacketSize; - // Determine number of entries needed for 2 timer ticks. - int ms = 1<<frameexp; - int count = DIV_ROUND_UP(ticks_to_ms(2), ms); - count = ALIGN(count, 2); - struct uhci_pipe *pipe = malloc_low(sizeof(*pipe)); - struct uhci_td *tds = malloc_low(sizeof(*tds) * count); - void *data = malloc_low(maxpacket * count); - if (!pipe || !tds || !data) { - warn_noalloc(); - goto fail; - } - memset(pipe, 0, sizeof(*pipe)); - usb_desc2pipe(&pipe->pipe, usbdev, epdesc); - int lowspeed = pipe->pipe.speed; - int devaddr = pipe->pipe.devaddr | (pipe->pipe.ep << 7); - pipe->qh.element = (u32)tds; - pipe->next_td = &tds[0]; - pipe->iobase = cntl->iobase; - - int toggle = 0; - int i; - for (i=0; i<count; i++) { - tds[i].link = (i==count-1 ? (u32)&tds[0] : (u32)&tds[i+1]); - tds[i].status = (uhci_maxerr(3) | (lowspeed ? TD_CTRL_LS : 0) - | TD_CTRL_ACTIVE); - tds[i].token = (uhci_explen(maxpacket) | toggle - | (devaddr << TD_TOKEN_DEVADDR_SHIFT) - | USB_PID_IN); - tds[i].buffer = data + maxpacket * i; - toggle ^= TD_TOKEN_TOGGLE; - } - - // Add to interrupt schedule. - struct uhci_framelist *fl = cntl->framelist; - if (frameexp == 0) { - // Add to existing interrupt entry. - struct uhci_qh *intr_qh = (void*)(fl->links[0] & ~UHCI_PTR_BITS); - pipe->qh.link = intr_qh->link; - barrier(); - intr_qh->link = (u32)&pipe->qh | UHCI_PTR_QH; - if (cntl->control_qh == intr_qh) - cntl->control_qh = &pipe->qh; - } else { - int startpos = 1<<(frameexp-1); - pipe->qh.link = fl->links[startpos]; - barrier(); - for (i=startpos; i<ARRAY_SIZE(fl->links); i+=ms) - fl->links[i] = (u32)&pipe->qh | UHCI_PTR_QH; - } - - return &pipe->pipe; -fail: - free(pipe); - free(tds); - free(data); - return NULL; -} - -struct usb_pipe * -uhci_realloc_pipe(struct usbdevice_s *usbdev, struct usb_pipe *upipe - , struct usb_endpoint_descriptor *epdesc) -{ - if (! CONFIG_USB_UHCI) - return NULL; - usb_add_freelist(upipe); - if (!epdesc) - return NULL; - u8 eptype = epdesc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK; - if (eptype == USB_ENDPOINT_XFER_INT) - return uhci_alloc_intr_pipe(usbdev, epdesc); - struct usb_uhci_s *cntl = container_of( - usbdev->hub->cntl, struct usb_uhci_s, usb); - dprintf(7, "uhci_alloc_async_pipe %p %d\n", &cntl->usb, eptype); - - struct usb_pipe *usbpipe = usb_get_freelist(&cntl->usb, eptype); - if (usbpipe) { - // Use previously allocated pipe. - usb_desc2pipe(usbpipe, usbdev, epdesc); - return usbpipe; - } - - // Allocate a new queue head. - struct uhci_pipe *pipe; - if (eptype == USB_ENDPOINT_XFER_CONTROL) - pipe = malloc_tmphigh(sizeof(*pipe)); - else - pipe = malloc_low(sizeof(*pipe)); - if (!pipe) { - warn_noalloc(); - return NULL; - } - memset(pipe, 0, sizeof(*pipe)); - usb_desc2pipe(&pipe->pipe, usbdev, epdesc); - pipe->qh.element = UHCI_PTR_TERM; - pipe->iobase = cntl->iobase; - - // Add queue head to controller list. - struct uhci_qh *control_qh = cntl->control_qh; - pipe->qh.link = control_qh->link; - barrier(); - control_qh->link = (u32)&pipe->qh | UHCI_PTR_QH; - if (eptype == USB_ENDPOINT_XFER_CONTROL) - cntl->control_qh = &pipe->qh; - return &pipe->pipe; -} - -static int -wait_pipe(struct uhci_pipe *pipe, u32 end) -{ - for (;;) { - u32 el_link = GET_LOWFLAT(pipe->qh.element); - if (el_link & UHCI_PTR_TERM) - return 0; - if (timer_check(end)) { - warn_timeout(); - u16 iobase = GET_LOWFLAT(pipe->iobase); - struct uhci_td *td = (void*)(el_link & ~UHCI_PTR_BITS); - dprintf(1, "Timeout on wait_pipe %p (td=%p s=%x c=%x/%x)\n" - , pipe, (void*)el_link, GET_LOWFLAT(td->status) - , inw(iobase + USBCMD) - , inw(iobase + USBSTS)); - SET_LOWFLAT(pipe->qh.element, UHCI_PTR_TERM); - uhci_waittick(iobase); - return -1; - } - yield(); - } -} - -static int -wait_td(struct uhci_td *td, u32 end) -{ - u32 status; - for (;;) { - status = td->status; - if (!(status & TD_CTRL_ACTIVE)) - break; - if (timer_check(end)) { - warn_timeout(); - return -1; - } - yield(); - } - if (status & TD_CTRL_ANY_ERROR) { - dprintf(1, "wait_td error - status=%x\n", status); - return -2; - } - return 0; -} - -#define STACKTDS 16 -#define TDALIGN 16 - -int -uhci_send_pipe(struct usb_pipe *p, int dir, const void *cmd - , void *data, int datasize) -{ - if (! CONFIG_USB_UHCI) - return -1; - struct uhci_pipe *pipe = container_of(p, struct uhci_pipe, pipe); - dprintf(7, "uhci_send_pipe qh=%p dir=%d data=%p size=%d\n" - , &pipe->qh, dir, data, datasize); - int maxpacket = GET_LOWFLAT(pipe->pipe.maxpacket); - int lowspeed = GET_LOWFLAT(pipe->pipe.speed); - int devaddr = (GET_LOWFLAT(pipe->pipe.devaddr) - | (GET_LOWFLAT(pipe->pipe.ep) << 7)); - int toggle = GET_LOWFLAT(pipe->toggle) ? TD_TOKEN_TOGGLE : 0; - - // Allocate 16 tds on stack (16byte aligned) - u8 tdsbuf[sizeof(struct uhci_td) * STACKTDS + TDALIGN - 1]; - struct uhci_td *tds = (void*)ALIGN((u32)tdsbuf, TDALIGN); - memset(tds, 0, sizeof(*tds) * STACKTDS); - int tdpos = 0; - - // Enable tds - u32 end = timer_calc(usb_xfer_time(p, datasize)); - barrier(); - SET_LOWFLAT(pipe->qh.element, (u32)MAKE_FLATPTR(GET_SEG(SS), tds)); - - // Setup transfer descriptors - if (cmd) { - // Send setup pid on control transfers - struct uhci_td *td = &tds[tdpos++ % STACKTDS]; - u32 nexttd = (u32)MAKE_FLATPTR(GET_SEG(SS), &tds[tdpos % STACKTDS]); - td->link = nexttd | UHCI_PTR_DEPTH; - td->token = (uhci_explen(USB_CONTROL_SETUP_SIZE) - | (devaddr << TD_TOKEN_DEVADDR_SHIFT) | USB_PID_SETUP); - td->buffer = (void*)cmd; - barrier(); - td->status = (uhci_maxerr(3) | (lowspeed ? TD_CTRL_LS : 0) - | TD_CTRL_ACTIVE); - toggle = TD_TOKEN_TOGGLE; - } - while (datasize) { - // Send data pids - struct uhci_td *td = &tds[tdpos++ % STACKTDS]; - int ret = wait_td(td, end); - if (ret) - goto fail; - - int transfer = datasize; - if (transfer > maxpacket) - transfer = maxpacket; - u32 nexttd = (u32)MAKE_FLATPTR(GET_SEG(SS), &tds[tdpos % STACKTDS]); - td->link = ((transfer==datasize && !cmd) - ? UHCI_PTR_TERM : (nexttd | UHCI_PTR_DEPTH)); - td->token = (uhci_explen(transfer) | toggle - | (devaddr << TD_TOKEN_DEVADDR_SHIFT) - | (dir ? USB_PID_IN : USB_PID_OUT)); - td->buffer = data; - barrier(); - td->status = (uhci_maxerr(3) | (lowspeed ? TD_CTRL_LS : 0) - | TD_CTRL_ACTIVE); - toggle ^= TD_TOKEN_TOGGLE; - - data += transfer; - datasize -= transfer; - } - if (cmd) { - // Send status pid on control transfers - struct uhci_td *td = &tds[tdpos++ % STACKTDS]; - int ret = wait_td(td, end); - if (ret) - goto fail; - td->link = UHCI_PTR_TERM; - td->token = (uhci_explen(0) | TD_TOKEN_TOGGLE - | (devaddr << TD_TOKEN_DEVADDR_SHIFT) - | (dir ? USB_PID_OUT : USB_PID_IN)); - td->buffer = 0; - barrier(); - td->status = (uhci_maxerr(0) | (lowspeed ? TD_CTRL_LS : 0) - | TD_CTRL_ACTIVE); - } - SET_LOWFLAT(pipe->toggle, !!toggle); - return wait_pipe(pipe, end); -fail: - dprintf(1, "uhci_send_bulk failed\n"); - SET_LOWFLAT(pipe->qh.element, UHCI_PTR_TERM); - uhci_waittick(GET_LOWFLAT(pipe->iobase)); - return -1; -} - -int -uhci_poll_intr(struct usb_pipe *p, void *data) -{ - ASSERT16(); - if (! CONFIG_USB_UHCI) - return -1; - - struct uhci_pipe *pipe = container_of(p, struct uhci_pipe, pipe); - struct uhci_td *td = GET_LOWFLAT(pipe->next_td); - u32 status = GET_LOWFLAT(td->status); - u32 token = GET_LOWFLAT(td->token); - if (status & TD_CTRL_ACTIVE) - // No intrs found. - return -1; - // XXX - check for errors. - - // Copy data. - void *tddata = GET_LOWFLAT(td->buffer); - memcpy_far(GET_SEG(SS), data, SEG_LOW, LOWFLAT2LOW(tddata) - , uhci_expected_length(token)); - - // Reenable this td. - struct uhci_td *next = (void*)(GET_LOWFLAT(td->link) & ~UHCI_PTR_BITS); - SET_LOWFLAT(pipe->next_td, next); - barrier(); - SET_LOWFLAT(td->status, (uhci_maxerr(0) | (status & TD_CTRL_LS) - | TD_CTRL_ACTIVE)); - - return 0; -} diff --git a/payloads/external/SeaBIOS/src/hw/usb-uhci.h b/payloads/external/SeaBIOS/src/hw/usb-uhci.h deleted file mode 100644 index bff70c66..00000000 --- a/payloads/external/SeaBIOS/src/hw/usb-uhci.h +++ /dev/null @@ -1,128 +0,0 @@ -#ifndef __USB_UHCI_H -#define __USB_UHCI_H - -// usb-uhci.c -void uhci_setup(void); -struct usbdevice_s; -struct usb_endpoint_descriptor; -struct usb_pipe; -struct usb_pipe *uhci_realloc_pipe(struct usbdevice_s *usbdev - , struct usb_pipe *upipe - , struct usb_endpoint_descriptor *epdesc); -int uhci_send_pipe(struct usb_pipe *p, int dir, const void *cmd - , void *data, int datasize); -int uhci_poll_intr(struct usb_pipe *p, void *data); - - -/**************************************************************** - * uhci structs and flags - ****************************************************************/ - -/* USB port status and control registers */ -#define USBPORTSC1 16 -#define USBPORTSC2 18 -#define USBPORTSC_CCS 0x0001 /* Current Connect Status - * ("device present") */ -#define USBPORTSC_CSC 0x0002 /* Connect Status Change */ -#define USBPORTSC_PE 0x0004 /* Port Enable */ -#define USBPORTSC_PEC 0x0008 /* Port Enable Change */ -#define USBPORTSC_DPLUS 0x0010 /* D+ high (line status) */ -#define USBPORTSC_DMINUS 0x0020 /* D- high (line status) */ -#define USBPORTSC_RD 0x0040 /* Resume Detect */ -#define USBPORTSC_RES1 0x0080 /* reserved, always 1 */ -#define USBPORTSC_LSDA 0x0100 /* Low Speed Device Attached */ -#define USBPORTSC_PR 0x0200 /* Port Reset */ - -/* Legacy support register */ -#define USBLEGSUP 0xc0 -#define USBLEGSUP_RWC 0x8f00 /* the R/WC bits */ - -/* Command register */ -#define USBCMD 0 -#define USBCMD_RS 0x0001 /* Run/Stop */ -#define USBCMD_HCRESET 0x0002 /* Host reset */ -#define USBCMD_GRESET 0x0004 /* Global reset */ -#define USBCMD_EGSM 0x0008 /* Global Suspend Mode */ -#define USBCMD_FGR 0x0010 /* Force Global Resume */ -#define USBCMD_SWDBG 0x0020 /* SW Debug mode */ -#define USBCMD_CF 0x0040 /* Config Flag (sw only) */ -#define USBCMD_MAXP 0x0080 /* Max Packet (0 = 32, 1 = 64) */ - -/* Status register */ -#define USBSTS 2 -#define USBSTS_USBINT 0x0001 /* Interrupt due to IOC */ -#define USBSTS_ERROR 0x0002 /* Interrupt due to error */ -#define USBSTS_RD 0x0004 /* Resume Detect */ -#define USBSTS_HSE 0x0008 /* Host System Error: PCI problems */ -#define USBSTS_HCPE 0x0010 /* Host Controller Process Error: - * the schedule is buggy */ -#define USBSTS_HCH 0x0020 /* HC Halted */ - -/* Interrupt enable register */ -#define USBINTR 4 -#define USBINTR_TIMEOUT 0x0001 /* Timeout/CRC error enable */ -#define USBINTR_RESUME 0x0002 /* Resume interrupt enable */ -#define USBINTR_IOC 0x0004 /* Interrupt On Complete enable */ -#define USBINTR_SP 0x0008 /* Short packet interrupt enable */ - -#define USBFRNUM 6 -#define USBFLBASEADD 8 -#define USBSOF 12 -#define USBSOF_DEFAULT 64 /* Frame length is exactly 1 ms */ - -struct uhci_framelist { - u32 links[1024]; -} PACKED; - -#define TD_CTRL_SPD (1 << 29) /* Short Packet Detect */ -#define TD_CTRL_C_ERR_MASK (3 << 27) /* Error Counter bits */ -#define TD_CTRL_C_ERR_SHIFT 27 -#define TD_CTRL_LS (1 << 26) /* Low Speed Device */ -#define TD_CTRL_IOS (1 << 25) /* Isochronous Select */ -#define TD_CTRL_IOC (1 << 24) /* Interrupt on Complete */ -#define TD_CTRL_ACTIVE (1 << 23) /* TD Active */ -#define TD_CTRL_STALLED (1 << 22) /* TD Stalled */ -#define TD_CTRL_DBUFERR (1 << 21) /* Data Buffer Error */ -#define TD_CTRL_BABBLE (1 << 20) /* Babble Detected */ -#define TD_CTRL_NAK (1 << 19) /* NAK Received */ -#define TD_CTRL_CRCTIMEO (1 << 18) /* CRC/Time Out Error */ -#define TD_CTRL_BITSTUFF (1 << 17) /* Bit Stuff Error */ -#define TD_CTRL_ACTLEN_MASK 0x7FF /* actual length, encoded as n - 1 */ - -#define TD_CTRL_ANY_ERROR (TD_CTRL_STALLED | TD_CTRL_DBUFERR | \ - TD_CTRL_BABBLE | TD_CTRL_CRCTIMEO | \ - TD_CTRL_BITSTUFF) -#define uhci_maxerr(err) ((err) << TD_CTRL_C_ERR_SHIFT) - -#define TD_TOKEN_DEVADDR_SHIFT 8 -#define TD_TOKEN_TOGGLE_SHIFT 19 -#define TD_TOKEN_TOGGLE (1 << 19) -#define TD_TOKEN_EXPLEN_SHIFT 21 -#define TD_TOKEN_EXPLEN_MASK 0x7FF /* expected length, encoded as n-1 */ -#define TD_TOKEN_PID_MASK 0xFF - -#define uhci_explen(len) ((((len) - 1) & TD_TOKEN_EXPLEN_MASK) << \ - TD_TOKEN_EXPLEN_SHIFT) - -#define uhci_expected_length(token) ((((token) >> TD_TOKEN_EXPLEN_SHIFT) + \ - 1) & TD_TOKEN_EXPLEN_MASK) - -struct uhci_td { - u32 link; - u32 status; - u32 token; - void *buffer; -} PACKED; - -struct uhci_qh { - u32 link; - u32 element; -} PACKED; - -#define UHCI_PTR_BITS 0x000F -#define UHCI_PTR_TERM 0x0001 -#define UHCI_PTR_QH 0x0002 -#define UHCI_PTR_DEPTH 0x0004 -#define UHCI_PTR_BREADTH 0x0000 - -#endif // usb-uhci.h diff --git a/payloads/external/SeaBIOS/src/hw/usb-xhci.c b/payloads/external/SeaBIOS/src/hw/usb-xhci.c deleted file mode 100644 index c35f2211..00000000 --- a/payloads/external/SeaBIOS/src/hw/usb-xhci.c +++ /dev/null @@ -1,1206 +0,0 @@ -// Code for handling XHCI "Super speed" USB controllers. -// -// Copyright (C) 2013 Gerd Hoffmann <kraxel@redhat.com> -// Copyright (C) 2014 Kevin O'Connor <kevin@koconnor.net> -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "config.h" // CONFIG_* -#include "malloc.h" // memalign_low -#include "memmap.h" // PAGE_SIZE -#include "output.h" // dprintf -#include "pcidevice.h" // foreachpci -#include "pci_ids.h" // PCI_CLASS_SERIAL_USB_XHCI -#include "pci_regs.h" // PCI_BASE_ADDRESS_0 -#include "string.h" // memcpy -#include "usb.h" // struct usb_s -#include "usb-xhci.h" // struct ehci_qh -#include "util.h" // timer_calc -#include "x86.h" // readl - -// -------------------------------------------------------------- -// configuration - -#define XHCI_RING_ITEMS 16 -#define XHCI_RING_SIZE (XHCI_RING_ITEMS*sizeof(struct xhci_trb)) - -/* - * xhci_ring structs are allocated with XHCI_RING_SIZE alignment, - * then we can get it from a trb pointer (provided by evt ring). - */ -#define XHCI_RING(_trb) \ - ((struct xhci_ring*)((u32)(_trb) & ~(XHCI_RING_SIZE-1))) - -// -------------------------------------------------------------- -// bit definitions - -#define XHCI_CMD_RS (1<<0) -#define XHCI_CMD_HCRST (1<<1) -#define XHCI_CMD_INTE (1<<2) -#define XHCI_CMD_HSEE (1<<3) -#define XHCI_CMD_LHCRST (1<<7) -#define XHCI_CMD_CSS (1<<8) -#define XHCI_CMD_CRS (1<<9) -#define XHCI_CMD_EWE (1<<10) -#define XHCI_CMD_EU3S (1<<11) - -#define XHCI_STS_HCH (1<<0) -#define XHCI_STS_HSE (1<<2) -#define XHCI_STS_EINT (1<<3) -#define XHCI_STS_PCD (1<<4) -#define XHCI_STS_SSS (1<<8) -#define XHCI_STS_RSS (1<<9) -#define XHCI_STS_SRE (1<<10) -#define XHCI_STS_CNR (1<<11) -#define XHCI_STS_HCE (1<<12) - -#define XHCI_PORTSC_CCS (1<<0) -#define XHCI_PORTSC_PED (1<<1) -#define XHCI_PORTSC_OCA (1<<3) -#define XHCI_PORTSC_PR (1<<4) -#define XHCI_PORTSC_PLS_SHIFT 5 -#define XHCI_PORTSC_PLS_MASK 0xf -#define XHCI_PORTSC_PP (1<<9) -#define XHCI_PORTSC_SPEED_SHIFT 10 -#define XHCI_PORTSC_SPEED_MASK 0xf -#define XHCI_PORTSC_SPEED_FULL (1<<10) -#define XHCI_PORTSC_SPEED_LOW (2<<10) -#define XHCI_PORTSC_SPEED_HIGH (3<<10) -#define XHCI_PORTSC_SPEED_SUPER (4<<10) -#define XHCI_PORTSC_PIC_SHIFT 14 -#define XHCI_PORTSC_PIC_MASK 0x3 -#define XHCI_PORTSC_LWS (1<<16) -#define XHCI_PORTSC_CSC (1<<17) -#define XHCI_PORTSC_PEC (1<<18) -#define XHCI_PORTSC_WRC (1<<19) -#define XHCI_PORTSC_OCC (1<<20) -#define XHCI_PORTSC_PRC (1<<21) -#define XHCI_PORTSC_PLC (1<<22) -#define XHCI_PORTSC_CEC (1<<23) -#define XHCI_PORTSC_CAS (1<<24) -#define XHCI_PORTSC_WCE (1<<25) -#define XHCI_PORTSC_WDE (1<<26) -#define XHCI_PORTSC_WOE (1<<27) -#define XHCI_PORTSC_DR (1<<30) -#define XHCI_PORTSC_WPR (1<<31) - -#define TRB_C (1<<0) -#define TRB_TYPE_SHIFT 10 -#define TRB_TYPE_MASK 0x3f -#define TRB_TYPE(t) (((t) >> TRB_TYPE_SHIFT) & TRB_TYPE_MASK) - -#define TRB_EV_ED (1<<2) - -#define TRB_TR_ENT (1<<1) -#define TRB_TR_ISP (1<<2) -#define TRB_TR_NS (1<<3) -#define TRB_TR_CH (1<<4) -#define TRB_TR_IOC (1<<5) -#define TRB_TR_IDT (1<<6) -#define TRB_TR_TBC_SHIFT 7 -#define TRB_TR_TBC_MASK 0x3 -#define TRB_TR_BEI (1<<9) -#define TRB_TR_TLBPC_SHIFT 16 -#define TRB_TR_TLBPC_MASK 0xf -#define TRB_TR_FRAMEID_SHIFT 20 -#define TRB_TR_FRAMEID_MASK 0x7ff -#define TRB_TR_SIA (1<<31) - -#define TRB_TR_DIR (1<<16) - -#define TRB_CR_SLOTID_SHIFT 24 -#define TRB_CR_SLOTID_MASK 0xff -#define TRB_CR_EPID_SHIFT 16 -#define TRB_CR_EPID_MASK 0x1f - -#define TRB_CR_BSR (1<<9) -#define TRB_CR_DC (1<<9) - -#define TRB_LK_TC (1<<1) - -#define TRB_INTR_SHIFT 22 -#define TRB_INTR_MASK 0x3ff -#define TRB_INTR(t) (((t).status >> TRB_INTR_SHIFT) & TRB_INTR_MASK) - -typedef enum TRBType { - TRB_RESERVED = 0, - TR_NORMAL, - TR_SETUP, - TR_DATA, - TR_STATUS, - TR_ISOCH, - TR_LINK, - TR_EVDATA, - TR_NOOP, - CR_ENABLE_SLOT, - CR_DISABLE_SLOT, - CR_ADDRESS_DEVICE, - CR_CONFIGURE_ENDPOINT, - CR_EVALUATE_CONTEXT, - CR_RESET_ENDPOINT, - CR_STOP_ENDPOINT, - CR_SET_TR_DEQUEUE, - CR_RESET_DEVICE, - CR_FORCE_EVENT, - CR_NEGOTIATE_BW, - CR_SET_LATENCY_TOLERANCE, - CR_GET_PORT_BANDWIDTH, - CR_FORCE_HEADER, - CR_NOOP, - ER_TRANSFER = 32, - ER_COMMAND_COMPLETE, - ER_PORT_STATUS_CHANGE, - ER_BANDWIDTH_REQUEST, - ER_DOORBELL, - ER_HOST_CONTROLLER, - ER_DEVICE_NOTIFICATION, - ER_MFINDEX_WRAP, -} TRBType; - -typedef enum TRBCCode { - CC_INVALID = 0, - CC_SUCCESS, - CC_DATA_BUFFER_ERROR, - CC_BABBLE_DETECTED, - CC_USB_TRANSACTION_ERROR, - CC_TRB_ERROR, - CC_STALL_ERROR, - CC_RESOURCE_ERROR, - CC_BANDWIDTH_ERROR, - CC_NO_SLOTS_ERROR, - CC_INVALID_STREAM_TYPE_ERROR, - CC_SLOT_NOT_ENABLED_ERROR, - CC_EP_NOT_ENABLED_ERROR, - CC_SHORT_PACKET, - CC_RING_UNDERRUN, - CC_RING_OVERRUN, - CC_VF_ER_FULL, - CC_PARAMETER_ERROR, - CC_BANDWIDTH_OVERRUN, - CC_CONTEXT_STATE_ERROR, - CC_NO_PING_RESPONSE_ERROR, - CC_EVENT_RING_FULL_ERROR, - CC_INCOMPATIBLE_DEVICE_ERROR, - CC_MISSED_SERVICE_ERROR, - CC_COMMAND_RING_STOPPED, - CC_COMMAND_ABORTED, - CC_STOPPED, - CC_STOPPED_LENGTH_INVALID, - CC_MAX_EXIT_LATENCY_TOO_LARGE_ERROR = 29, - CC_ISOCH_BUFFER_OVERRUN = 31, - CC_EVENT_LOST_ERROR, - CC_UNDEFINED_ERROR, - CC_INVALID_STREAM_ID_ERROR, - CC_SECONDARY_BANDWIDTH_ERROR, - CC_SPLIT_TRANSACTION_ERROR -} TRBCCode; - -enum { - PLS_U0 = 0, - PLS_U1 = 1, - PLS_U2 = 2, - PLS_U3 = 3, - PLS_DISABLED = 4, - PLS_RX_DETECT = 5, - PLS_INACTIVE = 6, - PLS_POLLING = 7, - PLS_RECOVERY = 8, - PLS_HOT_RESET = 9, - PLS_COMPILANCE_MODE = 10, - PLS_TEST_MODE = 11, - PLS_RESUME = 15, -}; - -#define xhci_get_field(data, field) \ - (((data) >> field##_SHIFT) & field##_MASK) - -// -------------------------------------------------------------- -// state structs - -struct xhci_ring { - struct xhci_trb ring[XHCI_RING_ITEMS]; - struct xhci_trb evt; - u32 eidx; - u32 nidx; - u32 cs; - struct mutex_s lock; -}; - -struct xhci_portmap { - u8 start; - u8 count; -}; - -struct usb_xhci_s { - struct usb_s usb; - - /* devinfo */ - u32 xcap; - u32 ports; - u32 slots; - u8 context64; - struct xhci_portmap usb2; - struct xhci_portmap usb3; - - /* xhci registers */ - struct xhci_caps *caps; - struct xhci_op *op; - struct xhci_pr *pr; - struct xhci_ir *ir; - struct xhci_db *db; - - /* xhci data structures */ - struct xhci_devlist *devs; - struct xhci_ring *cmds; - struct xhci_ring *evts; - struct xhci_er_seg *eseg; -}; - -struct xhci_pipe { - struct xhci_ring reqs; - - struct usb_pipe pipe; - u32 slotid; - u32 epid; - void *buf; - int bufused; -}; - -// -------------------------------------------------------------- -// tables - -static const char *speed_name[16] = { - [ 0 ] = " - ", - [ 1 ] = "Full", - [ 2 ] = "Low", - [ 3 ] = "High", - [ 4 ] = "Super", -}; - -static const int speed_from_xhci[16] = { - [ 0 ] = -1, - [ 1 ] = USB_FULLSPEED, - [ 2 ] = USB_LOWSPEED, - [ 3 ] = USB_HIGHSPEED, - [ 4 ] = USB_SUPERSPEED, - [ 5 ... 15 ] = -1, -}; - -static const int speed_to_xhci[] = { - [ USB_FULLSPEED ] = 1, - [ USB_LOWSPEED ] = 2, - [ USB_HIGHSPEED ] = 3, - [ USB_SUPERSPEED ] = 4, -}; - -static int wait_bit(u32 *reg, u32 mask, int value, u32 timeout) -{ - u32 end = timer_calc(timeout); - - while ((readl(reg) & mask) != value) { - if (timer_check(end)) { - warn_timeout(); - return -1; - } - yield(); - } - return 0; -} - - -/**************************************************************** - * Root hub - ****************************************************************/ - -#define XHCI_TIME_POSTPOWER 20 - -// Check if device attached to port -static void -xhci_print_port_state(int loglevel, const char *prefix, u32 port, u32 portsc) -{ - u32 pls = xhci_get_field(portsc, XHCI_PORTSC_PLS); - u32 speed = xhci_get_field(portsc, XHCI_PORTSC_SPEED); - - dprintf(loglevel, "%s port #%d: 0x%08x,%s%s pls %d, speed %d [%s]\n", - prefix, port + 1, portsc, - (portsc & XHCI_PORTSC_PP) ? " powered," : "", - (portsc & XHCI_PORTSC_PED) ? " enabled," : "", - pls, speed, speed_name[speed]); -} - -static int -xhci_hub_detect(struct usbhub_s *hub, u32 port) -{ - struct usb_xhci_s *xhci = container_of(hub->cntl, struct usb_xhci_s, usb); - u32 portsc = readl(&xhci->pr[port].portsc); - return (portsc & XHCI_PORTSC_CCS) ? 1 : 0; -} - -// Reset device on port -static int -xhci_hub_reset(struct usbhub_s *hub, u32 port) -{ - struct usb_xhci_s *xhci = container_of(hub->cntl, struct usb_xhci_s, usb); - u32 portsc = readl(&xhci->pr[port].portsc); - if (!(portsc & XHCI_PORTSC_CCS)) - // Device no longer connected?! - return -1; - - switch (xhci_get_field(portsc, XHCI_PORTSC_PLS)) { - case PLS_U0: - // A USB3 port - controller automatically performs reset - break; - case PLS_POLLING: - // A USB2 port - perform device reset - xhci_print_port_state(3, __func__, port, portsc); - writel(&xhci->pr[port].portsc, portsc | XHCI_PORTSC_PR); - break; - default: - return -1; - } - - // Wait for device to complete reset and be enabled - u32 end = timer_calc(100); - for (;;) { - portsc = readl(&xhci->pr[port].portsc); - if (!(portsc & XHCI_PORTSC_CCS)) - // Device disconnected during reset - return -1; - if (portsc & XHCI_PORTSC_PED) - // Reset complete - break; - if (timer_check(end)) { - warn_timeout(); - return -1; - } - yield(); - } - - int rc = speed_from_xhci[xhci_get_field(portsc, XHCI_PORTSC_SPEED)]; - xhci_print_port_state(1, "XHCI", port, portsc); - return rc; -} - -static int -xhci_hub_portmap(struct usbhub_s *hub, u32 vport) -{ - struct usb_xhci_s *xhci = container_of(hub->cntl, struct usb_xhci_s, usb); - u32 pport = vport + 1; - - if (vport + 1 >= xhci->usb3.start && - vport + 1 < xhci->usb3.start + xhci->usb3.count) - pport = vport + 2 - xhci->usb3.start; - - if (vport + 1 >= xhci->usb2.start && - vport + 1 < xhci->usb2.start + xhci->usb2.count) - pport = vport + 2 - xhci->usb2.start; - - return pport; -} - -static void -xhci_hub_disconnect(struct usbhub_s *hub, u32 port) -{ - // XXX - should turn the port power off. -} - -static struct usbhub_op_s xhci_hub_ops = { - .detect = xhci_hub_detect, - .reset = xhci_hub_reset, - .portmap = xhci_hub_portmap, - .disconnect = xhci_hub_disconnect, -}; - -// Find any devices connected to the root hub. -static int -xhci_check_ports(struct usb_xhci_s *xhci) -{ - // Wait for port power to stabilize. - msleep(XHCI_TIME_POSTPOWER); - - struct usbhub_s hub; - memset(&hub, 0, sizeof(hub)); - hub.cntl = &xhci->usb; - hub.portcount = xhci->ports; - hub.op = &xhci_hub_ops; - usb_enumerate(&hub); - return hub.devcount; -} - - -/**************************************************************** - * Setup - ****************************************************************/ - -static void -xhci_free_pipes(struct usb_xhci_s *xhci) -{ - // XXX - should walk list of pipes and free unused pipes. -} - -static void -configure_xhci(void *data) -{ - struct usb_xhci_s *xhci = data; - u32 reg; - - xhci->devs = memalign_high(64, sizeof(*xhci->devs) * (xhci->slots + 1)); - xhci->eseg = memalign_high(64, sizeof(*xhci->eseg)); - xhci->cmds = memalign_high(XHCI_RING_SIZE, sizeof(*xhci->cmds)); - xhci->evts = memalign_high(XHCI_RING_SIZE, sizeof(*xhci->evts)); - if (!xhci->devs || !xhci->cmds || !xhci->evts || !xhci->eseg) { - warn_noalloc(); - goto fail; - } - memset(xhci->devs, 0, sizeof(*xhci->devs) * (xhci->slots + 1)); - memset(xhci->cmds, 0, sizeof(*xhci->cmds)); - memset(xhci->evts, 0, sizeof(*xhci->evts)); - memset(xhci->eseg, 0, sizeof(*xhci->eseg)); - - reg = readl(&xhci->op->usbcmd); - if (reg & XHCI_CMD_RS) { - reg &= ~XHCI_CMD_RS; - writel(&xhci->op->usbcmd, reg); - if (wait_bit(&xhci->op->usbsts, XHCI_STS_HCH, XHCI_STS_HCH, 32) != 0) - goto fail; - } - - dprintf(3, "%s: resetting\n", __func__); - writel(&xhci->op->usbcmd, XHCI_CMD_HCRST); - if (wait_bit(&xhci->op->usbcmd, XHCI_CMD_HCRST, 0, 1000) != 0) - goto fail; - if (wait_bit(&xhci->op->usbsts, XHCI_STS_CNR, 0, 1000) != 0) - goto fail; - - writel(&xhci->op->config, xhci->slots); - writel(&xhci->op->dcbaap_low, (u32)xhci->devs); - writel(&xhci->op->dcbaap_high, 0); - writel(&xhci->op->crcr_low, (u32)xhci->cmds | 1); - writel(&xhci->op->crcr_high, 0); - xhci->cmds->cs = 1; - - xhci->eseg->ptr_low = (u32)xhci->evts; - xhci->eseg->ptr_high = 0; - xhci->eseg->size = XHCI_RING_ITEMS; - writel(&xhci->ir->erstsz, 1); - writel(&xhci->ir->erdp_low, (u32)xhci->evts); - writel(&xhci->ir->erdp_high, 0); - writel(&xhci->ir->erstba_low, (u32)xhci->eseg); - writel(&xhci->ir->erstba_high, 0); - xhci->evts->cs = 1; - - reg = readl(&xhci->caps->hcsparams2); - u32 spb = (reg >> 21 & 0x1f) << 5 | reg >> 27; - if (spb) { - dprintf(3, "%s: setup %d scratch pad buffers\n", __func__, spb); - u64 *spba = memalign_high(64, sizeof(*spba) * spb); - void *pad = memalign_high(PAGE_SIZE, PAGE_SIZE * spb); - if (!spba || !pad) { - warn_noalloc(); - free(spba); - free(pad); - goto fail; - } - int i; - for (i = 0; i < spb; i++) - spba[i] = (u32)pad + (i * PAGE_SIZE); - xhci->devs[0].ptr_low = (u32)spba; - xhci->devs[0].ptr_high = 0; - } - - reg = readl(&xhci->op->usbcmd); - reg |= XHCI_CMD_RS; - writel(&xhci->op->usbcmd, reg); - - // Find devices - int count = xhci_check_ports(xhci); - xhci_free_pipes(xhci); - if (count) - // Success - return; - - // No devices found - shutdown and free controller. - dprintf(1, "XHCI no devices found\n"); - reg = readl(&xhci->op->usbcmd); - reg &= ~XHCI_CMD_RS; - writel(&xhci->op->usbcmd, reg); - wait_bit(&xhci->op->usbsts, XHCI_STS_HCH, XHCI_STS_HCH, 32); - -fail: - free(xhci->eseg); - free(xhci->evts); - free(xhci->cmds); - free(xhci->devs); - free(xhci); -} - -static struct usb_xhci_s* -xhci_controller_setup(void *baseaddr) -{ - struct usb_xhci_s *xhci = malloc_high(sizeof(*xhci)); - if (!xhci) { - warn_noalloc(); - return NULL; - } - memset(xhci, 0, sizeof(*xhci)); - xhci->caps = baseaddr; - xhci->op = baseaddr + readb(&xhci->caps->caplength); - xhci->pr = baseaddr + readb(&xhci->caps->caplength) + 0x400; - xhci->db = baseaddr + readl(&xhci->caps->dboff); - xhci->ir = baseaddr + readl(&xhci->caps->rtsoff) + 0x20; - - u32 hcs1 = readl(&xhci->caps->hcsparams1); - u32 hcc = readl(&xhci->caps->hccparams); - xhci->ports = (hcs1 >> 24) & 0xff; - xhci->slots = hcs1 & 0xff; - xhci->xcap = ((hcc >> 16) & 0xffff) << 2; - xhci->context64 = (hcc & 0x04) ? 1 : 0; - xhci->usb.type = USB_TYPE_XHCI; - - dprintf(1, "XHCI init: regs @ %p, %d ports, %d slots" - ", %d byte contexts\n" - , xhci->caps, xhci->ports, xhci->slots - , xhci->context64 ? 64 : 32); - - if (xhci->xcap) { - u32 off; - void *addr = baseaddr + xhci->xcap; - do { - struct xhci_xcap *xcap = addr; - u32 ports, name, cap = readl(&xcap->cap); - switch (cap & 0xff) { - case 0x02: - name = readl(&xcap->data[0]); - ports = readl(&xcap->data[1]); - u8 major = (cap >> 24) & 0xff; - u8 minor = (cap >> 16) & 0xff; - u8 count = (ports >> 8) & 0xff; - u8 start = (ports >> 0) & 0xff; - dprintf(1, "XHCI protocol %c%c%c%c %x.%02x" - ", %d ports (offset %d), def %x\n" - , (name >> 0) & 0xff - , (name >> 8) & 0xff - , (name >> 16) & 0xff - , (name >> 24) & 0xff - , major, minor - , count, start - , ports >> 16); - if (name == 0x20425355 /* "USB " */) { - if (major == 2) { - xhci->usb2.start = start; - xhci->usb2.count = count; - } - if (major == 3) { - xhci->usb3.start = start; - xhci->usb3.count = count; - } - } - break; - default: - dprintf(1, "XHCI extcap 0x%x @ %p\n", cap & 0xff, addr); - break; - } - off = (cap >> 8) & 0xff; - addr += off << 2; - } while (off > 0); - } - - u32 pagesize = readl(&xhci->op->pagesize); - if (PAGE_SIZE != (pagesize<<12)) { - dprintf(1, "XHCI driver does not support page size code %d\n" - , pagesize<<12); - free(xhci); - return NULL; - } - - return xhci; -} - -static void -xhci_controller_setup_pci(struct pci_device *pci) -{ - struct usb_xhci_s *xhci; - void *baseaddr; - - baseaddr = pci_enable_membar(pci, PCI_BASE_ADDRESS_0); - if (!baseaddr) - return; - - dprintf(1, "PCI: XHCI at %pP (mmio %p)\n", pci, baseaddr); - pci_enable_busmaster(pci); - - xhci = xhci_controller_setup(baseaddr); - if (!xhci) - return; - - xhci->usb.pci = pci; - run_thread(configure_xhci, xhci); -} - -static void -xhci_controller_setup_acpi(struct acpi_device *dev) -{ - struct usb_xhci_s *xhci; - u64 mem, unused; - void *baseaddr; - - if (acpi_dsdt_find_mem(dev, &mem, &unused) < 0) - return; - if (mem >= 0x100000000ll) - return; - - baseaddr = (void*)(u32)mem; - dprintf(1, "ACPI: XHCI at mmio %p\n", baseaddr); - - xhci = xhci_controller_setup(baseaddr); - if (!xhci) - return; - - xhci->usb.mmio = baseaddr; - run_thread(configure_xhci, xhci); -} - -void -xhci_setup(void) -{ - if (! CONFIG_USB_XHCI) - return; - - struct pci_device *pci; - foreachpci(pci) { - if (pci_classprog(pci) == PCI_CLASS_SERIAL_USB_XHCI) - xhci_controller_setup_pci(pci); - } - - u16 xhci_eisaid = 0x0d10; - struct acpi_device *dev; - for (dev = acpi_dsdt_find_eisaid(NULL, xhci_eisaid); - dev != NULL; - dev = acpi_dsdt_find_eisaid(dev, xhci_eisaid)) { - xhci_controller_setup_acpi(dev); - } -} - - -/**************************************************************** - * End point communication - ****************************************************************/ - -// Signal the hardware to process events on a TRB ring -static void xhci_doorbell(struct usb_xhci_s *xhci, u32 slotid, u32 value) -{ - dprintf(5, "%s: slotid %d, epid %d\n", __func__, slotid, value); - struct xhci_db *db = xhci->db; - void *addr = &db[slotid].doorbell; - writel(addr, value); -} - -// Dequeue events on the XHCI command ring generated by the hardware -static void xhci_process_events(struct usb_xhci_s *xhci) -{ - struct xhci_ring *evts = xhci->evts; - - for (;;) { - /* check for event */ - u32 nidx = evts->nidx; - u32 cs = evts->cs; - struct xhci_trb *etrb = evts->ring + nidx; - u32 control = etrb->control; - if ((control & TRB_C) != (cs ? 1 : 0)) - return; - - /* process event */ - u32 evt_type = TRB_TYPE(control); - u32 evt_cc = (etrb->status >> 24) & 0xff; - switch (evt_type) { - case ER_TRANSFER: - case ER_COMMAND_COMPLETE: - { - struct xhci_trb *rtrb = (void*)etrb->ptr_low; - struct xhci_ring *ring = XHCI_RING(rtrb); - struct xhci_trb *evt = &ring->evt; - u32 eidx = rtrb - ring->ring + 1; - dprintf(5, "%s: ring %p [trb %p, evt %p, type %d, eidx %d, cc %d]\n", - __func__, ring, rtrb, evt, evt_type, eidx, evt_cc); - memcpy(evt, etrb, sizeof(*etrb)); - ring->eidx = eidx; - break; - } - case ER_PORT_STATUS_CHANGE: - { - u32 port = ((etrb->ptr_low >> 24) & 0xff) - 1; - // Read status, and clear port status change bits - u32 portsc = readl(&xhci->pr[port].portsc); - u32 pclear = (((portsc & ~(XHCI_PORTSC_PED|XHCI_PORTSC_PR)) - & ~(XHCI_PORTSC_PLS_MASK<<XHCI_PORTSC_PLS_SHIFT)) - | (1<<XHCI_PORTSC_PLS_SHIFT)); - writel(&xhci->pr[port].portsc, pclear); - - xhci_print_port_state(3, __func__, port, portsc); - break; - } - default: - dprintf(1, "%s: unknown event, type %d, cc %d\n", - __func__, evt_type, evt_cc); - break; - } - - /* move ring index, notify xhci */ - nidx++; - if (nidx == XHCI_RING_ITEMS) { - nidx = 0; - cs = cs ? 0 : 1; - evts->cs = cs; - } - evts->nidx = nidx; - struct xhci_ir *ir = xhci->ir; - u32 erdp = (u32)(evts->ring + nidx); - writel(&ir->erdp_low, erdp); - writel(&ir->erdp_high, 0); - } -} - -// Check if a ring has any pending TRBs -static int xhci_ring_busy(struct xhci_ring *ring) -{ - u32 eidx = ring->eidx; - u32 nidx = ring->nidx; - return (eidx != nidx); -} - -// Wait for a ring to empty (all TRBs processed by hardware) -static int xhci_event_wait(struct usb_xhci_s *xhci, - struct xhci_ring *ring, - u32 timeout) -{ - u32 end = timer_calc(timeout); - - for (;;) { - xhci_process_events(xhci); - if (!xhci_ring_busy(ring)) { - u32 status = ring->evt.status; - return (status >> 24) & 0xff; - } - if (timer_check(end)) { - warn_timeout(); - return -1; - } - yield(); - } -} - -// Add a TRB to the given ring -static void xhci_trb_fill(struct xhci_ring *ring - , void *data, u32 xferlen, u32 flags) -{ - struct xhci_trb *dst = &ring->ring[ring->nidx]; - if (flags & TRB_TR_IDT) { - memcpy(&dst->ptr_low, data, xferlen); - } else { - dst->ptr_low = (u32)data; - dst->ptr_high = 0; - } - dst->status = xferlen; - dst->control = flags | (ring->cs ? TRB_C : 0); -} - -// Queue a TRB onto a ring, wrapping ring as needed -static void xhci_trb_queue(struct xhci_ring *ring, - void *data, u32 xferlen, u32 flags) -{ - if (ring->nidx >= ARRAY_SIZE(ring->ring) - 1) { - xhci_trb_fill(ring, ring->ring, 0, (TR_LINK << 10) | TRB_LK_TC); - ring->nidx = 0; - ring->cs ^= 1; - dprintf(5, "%s: ring %p [linked]\n", __func__, ring); - } - - xhci_trb_fill(ring, data, xferlen, flags); - ring->nidx++; - dprintf(5, "%s: ring %p [nidx %d, len %d]\n", - __func__, ring, ring->nidx, xferlen); -} - -// Submit a command to the xhci controller ring -static int xhci_cmd_submit(struct usb_xhci_s *xhci, struct xhci_inctx *inctx - , u32 flags) -{ - if (inctx) { - struct xhci_slotctx *slot = (void*)&inctx[1 << xhci->context64]; - u32 port = ((slot->ctx[1] >> 16) & 0xff) - 1; - u32 portsc = readl(&xhci->pr[port].portsc); - if (!(portsc & XHCI_PORTSC_CCS)) { - // Device no longer connected?! - xhci_print_port_state(1, __func__, port, portsc); - return -1; - } - } - - mutex_lock(&xhci->cmds->lock); - xhci_trb_queue(xhci->cmds, inctx, 0, flags); - xhci_doorbell(xhci, 0, 0); - int rc = xhci_event_wait(xhci, xhci->cmds, 1000); - mutex_unlock(&xhci->cmds->lock); - return rc; -} - -static int xhci_cmd_enable_slot(struct usb_xhci_s *xhci) -{ - dprintf(3, "%s:\n", __func__); - int cc = xhci_cmd_submit(xhci, NULL, CR_ENABLE_SLOT << 10); - if (cc != CC_SUCCESS) - return -1; - return (xhci->cmds->evt.control >> 24) & 0xff; -} - -static int xhci_cmd_disable_slot(struct usb_xhci_s *xhci, u32 slotid) -{ - dprintf(3, "%s: slotid %d\n", __func__, slotid); - return xhci_cmd_submit(xhci, NULL, (CR_DISABLE_SLOT << 10) | (slotid << 24)); -} - -static int xhci_cmd_address_device(struct usb_xhci_s *xhci, u32 slotid - , struct xhci_inctx *inctx) -{ - dprintf(3, "%s: slotid %d\n", __func__, slotid); - return xhci_cmd_submit(xhci, inctx - , (CR_ADDRESS_DEVICE << 10) | (slotid << 24)); -} - -static int xhci_cmd_configure_endpoint(struct usb_xhci_s *xhci, u32 slotid - , struct xhci_inctx *inctx) -{ - dprintf(3, "%s: slotid %d, add 0x%x, del 0x%x\n", __func__, - slotid, inctx->add, inctx->del); - return xhci_cmd_submit(xhci, inctx - , (CR_CONFIGURE_ENDPOINT << 10) | (slotid << 24)); -} - -static int xhci_cmd_evaluate_context(struct usb_xhci_s *xhci, u32 slotid - , struct xhci_inctx *inctx) -{ - dprintf(3, "%s: slotid %d, add 0x%x, del 0x%x\n", __func__, - slotid, inctx->add, inctx->del); - return xhci_cmd_submit(xhci, inctx - , (CR_EVALUATE_CONTEXT << 10) | (slotid << 24)); -} - -static struct xhci_inctx * -xhci_alloc_inctx(struct usbdevice_s *usbdev, int maxepid) -{ - struct usb_xhci_s *xhci = container_of( - usbdev->hub->cntl, struct usb_xhci_s, usb); - int size = (sizeof(struct xhci_inctx) * 33) << xhci->context64; - struct xhci_inctx *in = memalign_tmphigh(2048 << xhci->context64, size); - if (!in) { - warn_noalloc(); - return NULL; - } - memset(in, 0, size); - - struct xhci_slotctx *slot = (void*)&in[1 << xhci->context64]; - slot->ctx[0] |= maxepid << 27; // context entries - slot->ctx[0] |= speed_to_xhci[usbdev->speed] << 20; - - // Set high-speed hub flags. - struct usbdevice_s *hubdev = usbdev->hub->usbdev; - if (hubdev) { - if (usbdev->speed == USB_LOWSPEED || usbdev->speed == USB_FULLSPEED) { - struct xhci_pipe *hpipe = container_of( - hubdev->defpipe, struct xhci_pipe, pipe); - if (hubdev->speed == USB_HIGHSPEED) { - slot->ctx[2] |= hpipe->slotid; - slot->ctx[2] |= (usbdev->port+1) << 8; - } else { - struct xhci_slotctx *hslot = (void*)xhci->devs[hpipe->slotid].ptr_low; - slot->ctx[2] = hslot->ctx[2]; - } - } - u32 route = 0; - while (usbdev->hub->usbdev) { - route <<= 4; - route |= (usbdev->port+1) & 0xf; - usbdev = usbdev->hub->usbdev; - } - slot->ctx[0] |= route; - } - - slot->ctx[1] |= (usbdev->port+1) << 16; - - return in; -} - -static int xhci_config_hub(struct usbhub_s *hub) -{ - struct usb_xhci_s *xhci = container_of( - hub->cntl, struct usb_xhci_s, usb); - struct xhci_pipe *pipe = container_of( - hub->usbdev->defpipe, struct xhci_pipe, pipe); - struct xhci_slotctx *hdslot = (void*)xhci->devs[pipe->slotid].ptr_low; - if ((hdslot->ctx[3] >> 27) == 3) - // Already configured - return 0; - struct xhci_inctx *in = xhci_alloc_inctx(hub->usbdev, 1); - if (!in) - return -1; - in->add = 0x01; - struct xhci_slotctx *slot = (void*)&in[1 << xhci->context64]; - slot->ctx[0] |= 1 << 26; - slot->ctx[1] |= hub->portcount << 24; - - int cc = xhci_cmd_configure_endpoint(xhci, pipe->slotid, in); - free(in); - if (cc != CC_SUCCESS) { - dprintf(1, "%s: configure hub: failed (cc %d)\n", __func__, cc); - return -1; - } - return 0; -} - -static struct usb_pipe * -xhci_alloc_pipe(struct usbdevice_s *usbdev - , struct usb_endpoint_descriptor *epdesc) -{ - u8 eptype = epdesc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK; - struct usb_xhci_s *xhci = container_of( - usbdev->hub->cntl, struct usb_xhci_s, usb); - struct xhci_pipe *pipe; - u32 epid; - - if (epdesc->bEndpointAddress == 0) { - epid = 1; - } else { - epid = (epdesc->bEndpointAddress & 0x0f) * 2; - epid += (epdesc->bEndpointAddress & USB_DIR_IN) ? 1 : 0; - } - - if (eptype == USB_ENDPOINT_XFER_CONTROL) - pipe = memalign_high(XHCI_RING_SIZE, sizeof(*pipe)); - else - pipe = memalign_low(XHCI_RING_SIZE, sizeof(*pipe)); - if (!pipe) { - warn_noalloc(); - return NULL; - } - memset(pipe, 0, sizeof(*pipe)); - - usb_desc2pipe(&pipe->pipe, usbdev, epdesc); - pipe->epid = epid; - pipe->reqs.cs = 1; - if (eptype == USB_ENDPOINT_XFER_INT) { - pipe->buf = malloc_high(pipe->pipe.maxpacket); - if (!pipe->buf) { - warn_noalloc(); - free(pipe); - return NULL; - } - } - - // Allocate input context and initialize endpoint info. - struct xhci_inctx *in = xhci_alloc_inctx(usbdev, epid); - if (!in) - goto fail; - in->add = 0x01 | (1 << epid); - struct xhci_epctx *ep = (void*)&in[(pipe->epid+1) << xhci->context64]; - if (eptype == USB_ENDPOINT_XFER_INT) - ep->ctx[0] = (usb_get_period(usbdev, epdesc) + 3) << 16; - ep->ctx[1] |= eptype << 3; - if (epdesc->bEndpointAddress & USB_DIR_IN - || eptype == USB_ENDPOINT_XFER_CONTROL) - ep->ctx[1] |= 1 << 5; - ep->ctx[1] |= pipe->pipe.maxpacket << 16; - ep->deq_low = (u32)&pipe->reqs.ring[0]; - ep->deq_low |= 1; // dcs - ep->length = pipe->pipe.maxpacket; - - dprintf(3, "%s: usbdev %p, ring %p, slotid %d, epid %d\n", __func__, - usbdev, &pipe->reqs, pipe->slotid, pipe->epid); - if (pipe->epid == 1) { - if (usbdev->hub->usbdev) { - // Make sure parent hub is configured. - int ret = xhci_config_hub(usbdev->hub); - if (ret) - goto fail; - } - // Enable slot. - u32 size = (sizeof(struct xhci_slotctx) * 32) << xhci->context64; - struct xhci_slotctx *dev = memalign_high(1024 << xhci->context64, size); - if (!dev) { - warn_noalloc(); - goto fail; - } - int slotid = xhci_cmd_enable_slot(xhci); - if (slotid < 0) { - dprintf(1, "%s: enable slot: failed\n", __func__); - free(dev); - goto fail; - } - dprintf(3, "%s: enable slot: got slotid %d\n", __func__, slotid); - memset(dev, 0, size); - xhci->devs[slotid].ptr_low = (u32)dev; - xhci->devs[slotid].ptr_high = 0; - - // Send set_address command. - int cc = xhci_cmd_address_device(xhci, slotid, in); - if (cc != CC_SUCCESS) { - dprintf(1, "%s: address device: failed (cc %d)\n", __func__, cc); - cc = xhci_cmd_disable_slot(xhci, slotid); - if (cc != CC_SUCCESS) { - dprintf(1, "%s: disable failed (cc %d)\n", __func__, cc); - goto fail; - } - xhci->devs[slotid].ptr_low = 0; - free(dev); - goto fail; - } - pipe->slotid = slotid; - } else { - struct xhci_pipe *defpipe = container_of( - usbdev->defpipe, struct xhci_pipe, pipe); - pipe->slotid = defpipe->slotid; - // Send configure command. - int cc = xhci_cmd_configure_endpoint(xhci, pipe->slotid, in); - if (cc != CC_SUCCESS) { - dprintf(1, "%s: configure endpoint: failed (cc %d)\n", __func__, cc); - goto fail; - } - } - free(in); - return &pipe->pipe; - -fail: - free(pipe->buf); - free(pipe); - free(in); - return NULL; -} - -struct usb_pipe * -xhci_realloc_pipe(struct usbdevice_s *usbdev, struct usb_pipe *upipe - , struct usb_endpoint_descriptor *epdesc) -{ - if (!CONFIG_USB_XHCI) - return NULL; - if (!epdesc) { - usb_add_freelist(upipe); - return NULL; - } - if (!upipe) - return xhci_alloc_pipe(usbdev, epdesc); - u8 eptype = epdesc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK; - int oldmaxpacket = upipe->maxpacket; - usb_desc2pipe(upipe, usbdev, epdesc); - struct xhci_pipe *pipe = container_of(upipe, struct xhci_pipe, pipe); - struct usb_xhci_s *xhci = container_of( - pipe->pipe.cntl, struct usb_xhci_s, usb); - dprintf(3, "%s: usbdev %p, ring %p, slotid %d, epid %d\n", __func__, - usbdev, &pipe->reqs, pipe->slotid, pipe->epid); - if (eptype != USB_ENDPOINT_XFER_CONTROL || upipe->maxpacket == oldmaxpacket) - return upipe; - - // maxpacket has changed on control endpoint - update controller. - dprintf(1, "%s: reconf ctl endpoint pkt size: %d -> %d\n", - __func__, oldmaxpacket, pipe->pipe.maxpacket); - struct xhci_inctx *in = xhci_alloc_inctx(usbdev, 1); - if (!in) - return upipe; - in->add = (1 << 1); - struct xhci_epctx *ep = (void*)&in[2 << xhci->context64]; - ep->ctx[1] |= (pipe->pipe.maxpacket << 16); - int cc = xhci_cmd_evaluate_context(xhci, pipe->slotid, in); - if (cc != CC_SUCCESS) { - dprintf(1, "%s: reconf ctl endpoint: failed (cc %d)\n", - __func__, cc); - } - free(in); - - return upipe; -} - -// Submit a USB "setup" message request to the pipe's ring -static void xhci_xfer_setup(struct xhci_pipe *pipe, int dir, void *cmd - , void *data, int datalen) -{ - struct usb_xhci_s *xhci = container_of( - pipe->pipe.cntl, struct usb_xhci_s, usb); - xhci_trb_queue(&pipe->reqs, cmd, USB_CONTROL_SETUP_SIZE - , (TR_SETUP << 10) | TRB_TR_IDT - | ((datalen ? (dir ? 3 : 2) : 0) << 16)); - if (datalen) - xhci_trb_queue(&pipe->reqs, data, datalen, (TR_DATA << 10) - | ((dir ? 1 : 0) << 16)); - xhci_trb_queue(&pipe->reqs, NULL, 0, (TR_STATUS << 10) | TRB_TR_IOC - | ((dir ? 0 : 1) << 16)); - xhci_doorbell(xhci, pipe->slotid, pipe->epid); -} - -// Submit a USB transfer request to the pipe's ring -static void xhci_xfer_normal(struct xhci_pipe *pipe, - void *data, int datalen) -{ - struct usb_xhci_s *xhci = container_of( - pipe->pipe.cntl, struct usb_xhci_s, usb); - xhci_trb_queue(&pipe->reqs, data, datalen, (TR_NORMAL << 10) | TRB_TR_IOC); - xhci_doorbell(xhci, pipe->slotid, pipe->epid); -} - -int -xhci_send_pipe(struct usb_pipe *p, int dir, const void *cmd - , void *data, int datalen) -{ - if (!CONFIG_USB_XHCI) - return -1; - struct xhci_pipe *pipe = container_of(p, struct xhci_pipe, pipe); - struct usb_xhci_s *xhci = container_of( - pipe->pipe.cntl, struct usb_xhci_s, usb); - - if (cmd) { - const struct usb_ctrlrequest *req = cmd; - if (req->bRequest == USB_REQ_SET_ADDRESS) - // Set address command sent during xhci_alloc_pipe. - return 0; - xhci_xfer_setup(pipe, dir, (void*)req, data, datalen); - } else { - xhci_xfer_normal(pipe, data, datalen); - } - - int cc = xhci_event_wait(xhci, &pipe->reqs, usb_xfer_time(p, datalen)); - if (cc != CC_SUCCESS) { - dprintf(1, "%s: xfer failed (cc %d)\n", __func__, cc); - return -1; - } - - return 0; -} - -int VISIBLE32FLAT -xhci_poll_intr(struct usb_pipe *p, void *data) -{ - if (!CONFIG_USB_XHCI) - return -1; - - struct xhci_pipe *pipe = container_of(p, struct xhci_pipe, pipe); - struct usb_xhci_s *xhci = container_of( - pipe->pipe.cntl, struct usb_xhci_s, usb); - u32 len = pipe->pipe.maxpacket; - void *buf = pipe->buf; - int bufused = pipe->bufused; - - if (!bufused) { - xhci_xfer_normal(pipe, buf, len); - bufused = 1; - pipe->bufused = bufused; - return -1; - } - - xhci_process_events(xhci); - if (xhci_ring_busy(&pipe->reqs)) - return -1; - dprintf(5, "%s: st %x ct %x [ %p <= %p / %d ]\n", __func__, - pipe->reqs.evt.status, - pipe->reqs.evt.control, - data, buf, len); - memcpy(data, buf, len); - xhci_xfer_normal(pipe, buf, len); - return 0; -} diff --git a/payloads/external/SeaBIOS/src/hw/usb-xhci.h b/payloads/external/SeaBIOS/src/hw/usb-xhci.h deleted file mode 100644 index c768c5b5..00000000 --- a/payloads/external/SeaBIOS/src/hw/usb-xhci.h +++ /dev/null @@ -1,133 +0,0 @@ -#ifndef __USB_XHCI_H -#define __USB_XHCI_H - -struct usbdevice_s; -struct usb_endpoint_descriptor; -struct usb_pipe; - -// -------------------------------------------------------------- - -// usb-xhci.c -void xhci_setup(void); -struct usb_pipe *xhci_realloc_pipe(struct usbdevice_s *usbdev - , struct usb_pipe *upipe - , struct usb_endpoint_descriptor *epdesc); -int xhci_send_pipe(struct usb_pipe *p, int dir, const void *cmd - , void *data, int datasize); -int xhci_poll_intr(struct usb_pipe *p, void *data); - -// -------------------------------------------------------------- -// register interface - -// capabilities -struct xhci_caps { - u8 caplength; - u8 reserved_01; - u16 hciversion; - u32 hcsparams1; - u32 hcsparams2; - u32 hcsparams3; - u32 hccparams; - u32 dboff; - u32 rtsoff; -} PACKED; - -// extended capabilities -struct xhci_xcap { - u32 cap; - u32 data[]; -} PACKED; - -// operational registers -struct xhci_op { - u32 usbcmd; - u32 usbsts; - u32 pagesize; - u32 reserved_01[2]; - u32 dnctl; - u32 crcr_low; - u32 crcr_high; - u32 reserved_02[4]; - u32 dcbaap_low; - u32 dcbaap_high; - u32 config; -} PACKED; - -// port registers -struct xhci_pr { - u32 portsc; - u32 portpmsc; - u32 portli; - u32 reserved_01; -} PACKED; - -// doorbell registers -struct xhci_db { - u32 doorbell; -} PACKED; - -// runtime registers -struct xhci_rts { - u32 mfindex; -} PACKED; - -// interrupter registers -struct xhci_ir { - u32 iman; - u32 imod; - u32 erstsz; - u32 reserved_01; - u32 erstba_low; - u32 erstba_high; - u32 erdp_low; - u32 erdp_high; -} PACKED; - -// -------------------------------------------------------------- -// memory data structs - -// slot context -struct xhci_slotctx { - u32 ctx[4]; - u32 reserved_01[4]; -} PACKED; - -// endpoint context -struct xhci_epctx { - u32 ctx[2]; - u32 deq_low; - u32 deq_high; - u32 length; - u32 reserved_01[3]; -} PACKED; - -// device context array element -struct xhci_devlist { - u32 ptr_low; - u32 ptr_high; -} PACKED; - -// input context -struct xhci_inctx { - u32 del; - u32 add; - u32 reserved_01[6]; -} PACKED; - -// transfer block (ring element) -struct xhci_trb { - u32 ptr_low; - u32 ptr_high; - u32 status; - u32 control; -} PACKED; - -// event ring segment -struct xhci_er_seg { - u32 ptr_low; - u32 ptr_high; - u32 size; - u32 reserved_01; -} PACKED; - -#endif // usb-xhci.h diff --git a/payloads/external/SeaBIOS/src/hw/usb.c b/payloads/external/SeaBIOS/src/hw/usb.c deleted file mode 100644 index 38a866ad..00000000 --- a/payloads/external/SeaBIOS/src/hw/usb.c +++ /dev/null @@ -1,510 +0,0 @@ -// Main code for handling USB controllers and devices. -// -// Copyright (C) 2009-2013 Kevin O'Connor <kevin@koconnor.net> -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "biosvar.h" // GET_GLOBAL -#include "config.h" // CONFIG_* -#include "malloc.h" // free -#include "output.h" // dprintf -#include "romfile.h" // romfile_loadint -#include "string.h" // memset -#include "usb.h" // struct usb_s -#include "usb-ehci.h" // ehci_setup -#include "usb-xhci.h" // xhci_setup -#include "usb-hid.h" // usb_keyboard_setup -#include "usb-hub.h" // usb_hub_setup -#include "usb-msc.h" // usb_msc_setup -#include "usb-ohci.h" // ohci_setup -#include "usb-uas.h" // usb_uas_setup -#include "usb-uhci.h" // uhci_setup -#include "util.h" // msleep -#include "x86.h" // __fls - - -/**************************************************************** - * Controller function wrappers - ****************************************************************/ - -// Allocate, update, or free a usb pipe. -static struct usb_pipe * -usb_realloc_pipe(struct usbdevice_s *usbdev, struct usb_pipe *pipe - , struct usb_endpoint_descriptor *epdesc) -{ - switch (usbdev->hub->cntl->type) { - default: - case USB_TYPE_UHCI: - return uhci_realloc_pipe(usbdev, pipe, epdesc); - case USB_TYPE_OHCI: - return ohci_realloc_pipe(usbdev, pipe, epdesc); - case USB_TYPE_EHCI: - return ehci_realloc_pipe(usbdev, pipe, epdesc); - case USB_TYPE_XHCI: - return xhci_realloc_pipe(usbdev, pipe, epdesc); - } -} - -// Send a message on a control pipe using the default control descriptor. -static int -usb_send_pipe(struct usb_pipe *pipe_fl, int dir, const void *cmd - , void *data, int datasize) -{ - switch (GET_LOWFLAT(pipe_fl->type)) { - default: - case USB_TYPE_UHCI: - return uhci_send_pipe(pipe_fl, dir, cmd, data, datasize); - case USB_TYPE_OHCI: - if (MODESEGMENT) - return -1; - return ohci_send_pipe(pipe_fl, dir, cmd, data, datasize); - case USB_TYPE_EHCI: - return ehci_send_pipe(pipe_fl, dir, cmd, data, datasize); - case USB_TYPE_XHCI: - if (MODESEGMENT) - return -1; - return xhci_send_pipe(pipe_fl, dir, cmd, data, datasize); - } -} - -int -usb_poll_intr(struct usb_pipe *pipe_fl, void *data) -{ - ASSERT16(); - switch (GET_LOWFLAT(pipe_fl->type)) { - default: - case USB_TYPE_UHCI: - return uhci_poll_intr(pipe_fl, data); - case USB_TYPE_OHCI: - return ohci_poll_intr(pipe_fl, data); - case USB_TYPE_EHCI: - return ehci_poll_intr(pipe_fl, data); - case USB_TYPE_XHCI: ; - return call32_params(xhci_poll_intr, pipe_fl - , MAKE_FLATPTR(GET_SEG(SS), data), 0, -1); - } -} - -int usb_32bit_pipe(struct usb_pipe *pipe_fl) -{ - return (CONFIG_USB_XHCI && GET_LOWFLAT(pipe_fl->type) == USB_TYPE_XHCI) - || (CONFIG_USB_OHCI && GET_LOWFLAT(pipe_fl->type) == USB_TYPE_OHCI); -} - - -/**************************************************************** - * Helper functions - ****************************************************************/ - -// Allocate a usb pipe. -struct usb_pipe * -usb_alloc_pipe(struct usbdevice_s *usbdev - , struct usb_endpoint_descriptor *epdesc) -{ - return usb_realloc_pipe(usbdev, NULL, epdesc); -} - -// Free an allocated control or bulk pipe. -void -usb_free_pipe(struct usbdevice_s *usbdev, struct usb_pipe *pipe) -{ - if (!pipe) - return; - usb_realloc_pipe(usbdev, pipe, NULL); -} - -// Send a message to the default control pipe of a device. -int -usb_send_default_control(struct usb_pipe *pipe, const struct usb_ctrlrequest *req - , void *data) -{ - return usb_send_pipe(pipe, req->bRequestType & USB_DIR_IN, req - , data, req->wLength); -} - -// Send a message to a bulk endpoint -int -usb_send_bulk(struct usb_pipe *pipe_fl, int dir, void *data, int datasize) -{ - return usb_send_pipe(pipe_fl, dir, NULL, data, datasize); -} - -// Check if a pipe for a given controller is on the freelist -int -usb_is_freelist(struct usb_s *cntl, struct usb_pipe *pipe) -{ - return pipe->cntl != cntl; -} - -// Add a pipe to the controller's freelist -void -usb_add_freelist(struct usb_pipe *pipe) -{ - if (!pipe) - return; - struct usb_s *cntl = pipe->cntl; - pipe->freenext = cntl->freelist; - cntl->freelist = pipe; -} - -// Check for an available pipe on the freelist. -struct usb_pipe * -usb_get_freelist(struct usb_s *cntl, u8 eptype) -{ - struct usb_pipe **pfree = &cntl->freelist; - for (;;) { - struct usb_pipe *pipe = *pfree; - if (!pipe) - return NULL; - if (pipe->eptype == eptype) { - *pfree = pipe->freenext; - return pipe; - } - pfree = &pipe->freenext; - } -} - -// Fill "pipe" endpoint info from an endpoint descriptor. -void -usb_desc2pipe(struct usb_pipe *pipe, struct usbdevice_s *usbdev - , struct usb_endpoint_descriptor *epdesc) -{ - pipe->cntl = usbdev->hub->cntl; - pipe->type = usbdev->hub->cntl->type; - pipe->ep = epdesc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; - pipe->devaddr = usbdev->devaddr; - pipe->speed = usbdev->speed; - pipe->maxpacket = epdesc->wMaxPacketSize; - pipe->eptype = epdesc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK; -} - -// Find the exponential period of the requested interrupt end point. -int -usb_get_period(struct usbdevice_s *usbdev - , struct usb_endpoint_descriptor *epdesc) -{ - int period = epdesc->bInterval; - if (usbdev->speed != USB_HIGHSPEED) - return (period <= 0) ? 0 : __fls(period); - return (period <= 4) ? 0 : period - 4; -} - -// Maximum time (in ms) a data transfer should take -int -usb_xfer_time(struct usb_pipe *pipe, int datalen) -{ - // Use the maximum command time (5 seconds), except for - // set_address commands where we don't want to stall the boot if - // the device doesn't actually exist. Add 100ms to account for - // any controller delays. - if (!GET_LOWFLAT(pipe->devaddr)) - return USB_TIME_STATUS + 100; - return USB_TIME_COMMAND + 100; -} - -// Find the first endpoint of a given type in an interface description. -struct usb_endpoint_descriptor * -usb_find_desc(struct usbdevice_s *usbdev, int type, int dir) -{ - struct usb_endpoint_descriptor *epdesc = (void*)&usbdev->iface[1]; - for (;;) { - if ((void*)epdesc >= (void*)usbdev->iface + usbdev->imax - || epdesc->bDescriptorType == USB_DT_INTERFACE) { - return NULL; - } - if (epdesc->bDescriptorType == USB_DT_ENDPOINT - && (epdesc->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == dir - && (epdesc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == type) - return epdesc; - epdesc = (void*)epdesc + epdesc->bLength; - } -} - -// Get the first 8 bytes of the device descriptor. -static int -get_device_info8(struct usb_pipe *pipe, struct usb_device_descriptor *dinfo) -{ - struct usb_ctrlrequest req; - req.bRequestType = USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_DEVICE; - req.bRequest = USB_REQ_GET_DESCRIPTOR; - req.wValue = USB_DT_DEVICE<<8; - req.wIndex = 0; - req.wLength = 8; - return usb_send_default_control(pipe, &req, dinfo); -} - -static struct usb_config_descriptor * -get_device_config(struct usb_pipe *pipe) -{ - struct usb_config_descriptor cfg; - - struct usb_ctrlrequest req; - req.bRequestType = USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_DEVICE; - req.bRequest = USB_REQ_GET_DESCRIPTOR; - req.wValue = USB_DT_CONFIG<<8; - req.wIndex = 0; - req.wLength = sizeof(cfg); - int ret = usb_send_default_control(pipe, &req, &cfg); - if (ret) - return NULL; - - struct usb_config_descriptor *config = malloc_tmphigh(cfg.wTotalLength); - if (!config) { - warn_noalloc(); - return NULL; - } - req.wLength = cfg.wTotalLength; - ret = usb_send_default_control(pipe, &req, config); - if (ret || config->wTotalLength != cfg.wTotalLength) { - free(config); - return NULL; - } - //hexdump(config, cfg.wTotalLength); - return config; -} - -static int -set_configuration(struct usb_pipe *pipe, u16 val) -{ - struct usb_ctrlrequest req; - req.bRequestType = USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE; - req.bRequest = USB_REQ_SET_CONFIGURATION; - req.wValue = val; - req.wIndex = 0; - req.wLength = 0; - return usb_send_default_control(pipe, &req, NULL); -} - - -/**************************************************************** - * Initialization and enumeration - ****************************************************************/ - -static const int speed_to_ctlsize[] = { - [ USB_FULLSPEED ] = 8, - [ USB_LOWSPEED ] = 8, - [ USB_HIGHSPEED ] = 64, - [ USB_SUPERSPEED ] = 512, -}; - -// Assign an address to a device in the default state on the given -// controller. -static int -usb_set_address(struct usbdevice_s *usbdev) -{ - ASSERT32FLAT(); - struct usb_s *cntl = usbdev->hub->cntl; - dprintf(3, "set_address %p\n", cntl); - if (cntl->maxaddr >= USB_MAXADDR) - return -1; - - msleep(USB_TIME_RSTRCY); - - // Create a pipe for the default address. - struct usb_endpoint_descriptor epdesc = { - .wMaxPacketSize = speed_to_ctlsize[usbdev->speed], - .bmAttributes = USB_ENDPOINT_XFER_CONTROL, - }; - usbdev->defpipe = usb_alloc_pipe(usbdev, &epdesc); - if (!usbdev->defpipe) - return -1; - - // Send set_address command. - struct usb_ctrlrequest req; - req.bRequestType = USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE; - req.bRequest = USB_REQ_SET_ADDRESS; - req.wValue = cntl->maxaddr + 1; - req.wIndex = 0; - req.wLength = 0; - int ret = usb_send_default_control(usbdev->defpipe, &req, NULL); - if (ret) { - usb_free_pipe(usbdev, usbdev->defpipe); - return -1; - } - - msleep(USB_TIME_SETADDR_RECOVERY); - - cntl->maxaddr++; - usbdev->devaddr = cntl->maxaddr; - usbdev->defpipe = usb_realloc_pipe(usbdev, usbdev->defpipe, &epdesc); - if (!usbdev->defpipe) - return -1; - return 0; -} - -// Called for every found device - see if a driver is available for -// this device and do setup if so. -static int -configure_usb_device(struct usbdevice_s *usbdev) -{ - ASSERT32FLAT(); - dprintf(3, "config_usb: %p\n", usbdev->defpipe); - - // Set the max packet size for endpoint 0 of this device. - struct usb_device_descriptor dinfo; - int ret = get_device_info8(usbdev->defpipe, &dinfo); - if (ret) - return 0; - u16 maxpacket = dinfo.bMaxPacketSize0; - if (dinfo.bcdUSB >= 0x0300) - maxpacket = 1 << dinfo.bMaxPacketSize0; - dprintf(3, "device rev=%04x cls=%02x sub=%02x proto=%02x size=%d\n" - , dinfo.bcdUSB, dinfo.bDeviceClass, dinfo.bDeviceSubClass - , dinfo.bDeviceProtocol, maxpacket); - if (maxpacket < 8) - return 0; - struct usb_endpoint_descriptor epdesc = { - .wMaxPacketSize = maxpacket, - .bmAttributes = USB_ENDPOINT_XFER_CONTROL, - }; - usbdev->defpipe = usb_realloc_pipe(usbdev, usbdev->defpipe, &epdesc); - if (!usbdev->defpipe) - return -1; - - // Get configuration - struct usb_config_descriptor *config = get_device_config(usbdev->defpipe); - if (!config) - return 0; - - // Determine if a driver exists for this device - only look at the - // interfaces of the first configuration. - int num_iface = config->bNumInterfaces; - void *config_end = (void*)config + config->wTotalLength; - struct usb_interface_descriptor *iface = (void*)(&config[1]); - for (;;) { - if (!num_iface-- || (void*)iface + iface->bLength > config_end) - // Not a supported device. - goto fail; - if (iface->bDescriptorType == USB_DT_INTERFACE - && (iface->bInterfaceClass == USB_CLASS_HUB - || (iface->bInterfaceClass == USB_CLASS_MASS_STORAGE - && (iface->bInterfaceProtocol == US_PR_BULK - || iface->bInterfaceProtocol == US_PR_UAS)) - || (iface->bInterfaceClass == USB_CLASS_HID - && iface->bInterfaceSubClass == USB_INTERFACE_SUBCLASS_BOOT))) - break; - iface = (void*)iface + iface->bLength; - } - - // Set the configuration. - ret = set_configuration(usbdev->defpipe, config->bConfigurationValue); - if (ret) - goto fail; - - // Configure driver. - usbdev->config = config; - usbdev->iface = iface; - usbdev->imax = (void*)config + config->wTotalLength - (void*)iface; - if (iface->bInterfaceClass == USB_CLASS_HUB) - ret = usb_hub_setup(usbdev); - else if (iface->bInterfaceClass == USB_CLASS_MASS_STORAGE) { - if (iface->bInterfaceProtocol == US_PR_BULK) - ret = usb_msc_setup(usbdev); - if (iface->bInterfaceProtocol == US_PR_UAS) - ret = usb_uas_setup(usbdev); - } else - ret = usb_hid_setup(usbdev); - if (ret) - goto fail; - - free(config); - return 1; -fail: - free(config); - return 0; -} - -static void -usb_hub_port_setup(void *data) -{ - struct usbdevice_s *usbdev = data; - struct usbhub_s *hub = usbdev->hub; - u32 port = usbdev->port; - - for (;;) { - // Detect if device present (and possibly start reset) - int ret = hub->op->detect(hub, port); - if (ret > 0) - // Device connected. - break; - if (ret < 0 || timer_check(hub->detectend)) - // No device found. - goto done; - msleep(5); - } - - // XXX - wait USB_TIME_ATTDB time? - - // Reset port and determine device speed - mutex_lock(&hub->cntl->resetlock); - int ret = hub->op->reset(hub, port); - if (ret < 0) - // Reset failed - goto resetfail; - usbdev->speed = ret; - - // Set address of port - ret = usb_set_address(usbdev); - if (ret) { - hub->op->disconnect(hub, port); - goto resetfail; - } - mutex_unlock(&hub->cntl->resetlock); - - // Configure the device - int count = configure_usb_device(usbdev); - usb_free_pipe(usbdev, usbdev->defpipe); - if (!count) - hub->op->disconnect(hub, port); - hub->devcount += count; -done: - hub->threads--; - free(usbdev); - return; - -resetfail: - mutex_unlock(&hub->cntl->resetlock); - goto done; -} - -static u32 usb_time_sigatt; - -void -usb_enumerate(struct usbhub_s *hub) -{ - u32 portcount = hub->portcount; - hub->threads = portcount; - hub->detectend = timer_calc(usb_time_sigatt); - - // Launch a thread for every port. - int i; - for (i=0; i<portcount; i++) { - struct usbdevice_s *usbdev = malloc_tmphigh(sizeof(*usbdev)); - if (!usbdev) { - warn_noalloc(); - continue; - } - memset(usbdev, 0, sizeof(*usbdev)); - usbdev->hub = hub; - usbdev->port = i; - run_thread(usb_hub_port_setup, usbdev); - } - - // Wait for threads to complete. - while (hub->threads) - yield(); -} - -void -usb_setup(void) -{ - ASSERT32FLAT(); - if (! CONFIG_USB) - return; - dprintf(3, "init usb\n"); - usb_time_sigatt = romfile_loadint("etc/usb-time-sigatt", USB_TIME_SIGATT); - xhci_setup(); - ehci_setup(); - uhci_setup(); - ohci_setup(); -} diff --git a/payloads/external/SeaBIOS/src/hw/usb.h b/payloads/external/SeaBIOS/src/hw/usb.h deleted file mode 100644 index 887f2064..00000000 --- a/payloads/external/SeaBIOS/src/hw/usb.h +++ /dev/null @@ -1,255 +0,0 @@ -// USB functions and data. -#ifndef __USB_H -#define __USB_H - -#include "stacks.h" // struct mutex_s - -// Information on a USB end point. -struct usb_pipe { - union { - struct usb_s *cntl; - struct usb_pipe *freenext; - }; - u8 type; - u8 ep; - u8 devaddr; - u8 speed; - u16 maxpacket; - u8 eptype; -}; - -// Common information for usb devices. -struct usbdevice_s { - struct usbhub_s *hub; - struct usb_pipe *defpipe; - u32 port; - struct usb_config_descriptor *config; - struct usb_interface_descriptor *iface; - int imax; - u8 speed; - u8 devaddr; -}; - -// Common information for usb controllers. -struct usb_s { - struct usb_pipe *freelist; - struct mutex_s resetlock; - struct pci_device *pci; - void *mmio; - u8 type; - u8 maxaddr; -}; - -// Information for enumerating USB hubs -struct usbhub_s { - struct usbhub_op_s *op; - struct usbdevice_s *usbdev; - struct usb_s *cntl; - struct mutex_s lock; - u32 detectend; - u32 port; - u32 threads; - u32 portcount; - u32 devcount; -}; - -// Hub callback (32bit) info -struct usbhub_op_s { - int (*detect)(struct usbhub_s *hub, u32 port); - int (*reset)(struct usbhub_s *hub, u32 port); - int (*portmap)(struct usbhub_s *hub, u32 port); - void (*disconnect)(struct usbhub_s *hub, u32 port); -}; - -#define USB_TYPE_UHCI 1 -#define USB_TYPE_OHCI 2 -#define USB_TYPE_EHCI 3 -#define USB_TYPE_XHCI 4 - -#define USB_FULLSPEED 0 -#define USB_LOWSPEED 1 -#define USB_HIGHSPEED 2 -#define USB_SUPERSPEED 3 - -#define USB_MAXADDR 127 - - -/**************************************************************** - * usb structs and flags - ****************************************************************/ - -// USB mandated timings (in ms) -#define USB_TIME_SIGATT 100 -#define USB_TIME_ATTDB 100 -#define USB_TIME_DRST 10 -#define USB_TIME_DRSTR 50 -#define USB_TIME_RSTRCY 10 - -#define USB_TIME_STATUS 50 -#define USB_TIME_DATAIN 500 -#define USB_TIME_COMMAND 5000 - -#define USB_TIME_SETADDR_RECOVERY 2 - -#define USB_PID_OUT 0xe1 -#define USB_PID_IN 0x69 -#define USB_PID_SETUP 0x2d - -#define USB_DIR_OUT 0 /* to device */ -#define USB_DIR_IN 0x80 /* to host */ - -#define USB_TYPE_MASK (0x03 << 5) -#define USB_TYPE_STANDARD (0x00 << 5) -#define USB_TYPE_CLASS (0x01 << 5) -#define USB_TYPE_VENDOR (0x02 << 5) -#define USB_TYPE_RESERVED (0x03 << 5) - -#define USB_RECIP_MASK 0x1f -#define USB_RECIP_DEVICE 0x00 -#define USB_RECIP_INTERFACE 0x01 -#define USB_RECIP_ENDPOINT 0x02 -#define USB_RECIP_OTHER 0x03 - -#define USB_REQ_GET_STATUS 0x00 -#define USB_REQ_CLEAR_FEATURE 0x01 -#define USB_REQ_SET_FEATURE 0x03 -#define USB_REQ_SET_ADDRESS 0x05 -#define USB_REQ_GET_DESCRIPTOR 0x06 -#define USB_REQ_SET_DESCRIPTOR 0x07 -#define USB_REQ_GET_CONFIGURATION 0x08 -#define USB_REQ_SET_CONFIGURATION 0x09 -#define USB_REQ_GET_INTERFACE 0x0A -#define USB_REQ_SET_INTERFACE 0x0B -#define USB_REQ_SYNCH_FRAME 0x0C - -struct usb_ctrlrequest { - u8 bRequestType; - u8 bRequest; - u16 wValue; - u16 wIndex; - u16 wLength; -} PACKED; - -#define USB_DT_DEVICE 0x01 -#define USB_DT_CONFIG 0x02 -#define USB_DT_STRING 0x03 -#define USB_DT_INTERFACE 0x04 -#define USB_DT_ENDPOINT 0x05 -#define USB_DT_DEVICE_QUALIFIER 0x06 -#define USB_DT_OTHER_SPEED_CONFIG 0x07 -#define USB_DT_ENDPOINT_COMPANION 0x30 - -struct usb_device_descriptor { - u8 bLength; - u8 bDescriptorType; - - u16 bcdUSB; - u8 bDeviceClass; - u8 bDeviceSubClass; - u8 bDeviceProtocol; - u8 bMaxPacketSize0; - u16 idVendor; - u16 idProduct; - u16 bcdDevice; - u8 iManufacturer; - u8 iProduct; - u8 iSerialNumber; - u8 bNumConfigurations; -} PACKED; - -#define USB_CLASS_PER_INTERFACE 0 /* for DeviceClass */ -#define USB_CLASS_AUDIO 1 -#define USB_CLASS_COMM 2 -#define USB_CLASS_HID 3 -#define USB_CLASS_PHYSICAL 5 -#define USB_CLASS_STILL_IMAGE 6 -#define USB_CLASS_PRINTER 7 -#define USB_CLASS_MASS_STORAGE 8 -#define USB_CLASS_HUB 9 - -struct usb_config_descriptor { - u8 bLength; - u8 bDescriptorType; - - u16 wTotalLength; - u8 bNumInterfaces; - u8 bConfigurationValue; - u8 iConfiguration; - u8 bmAttributes; - u8 bMaxPower; -} PACKED; - -struct usb_interface_descriptor { - u8 bLength; - u8 bDescriptorType; - - u8 bInterfaceNumber; - u8 bAlternateSetting; - u8 bNumEndpoints; - u8 bInterfaceClass; - u8 bInterfaceSubClass; - u8 bInterfaceProtocol; - u8 iInterface; -} PACKED; - -struct usb_endpoint_descriptor { - u8 bLength; - u8 bDescriptorType; - - u8 bEndpointAddress; - u8 bmAttributes; - u16 wMaxPacketSize; - u8 bInterval; -} PACKED; - -#define USB_ENDPOINT_NUMBER_MASK 0x0f /* in bEndpointAddress */ -#define USB_ENDPOINT_DIR_MASK 0x80 - -#define USB_ENDPOINT_XFERTYPE_MASK 0x03 /* in bmAttributes */ -#define USB_ENDPOINT_XFER_CONTROL 0 -#define USB_ENDPOINT_XFER_ISOC 1 -#define USB_ENDPOINT_XFER_BULK 2 -#define USB_ENDPOINT_XFER_INT 3 -#define USB_ENDPOINT_MAX_ADJUSTABLE 0x80 - -#define USB_CONTROL_SETUP_SIZE 8 - - -/**************************************************************** - * usb mass storage flags - ****************************************************************/ - -#define US_SC_ATAPI_8020 0x02 -#define US_SC_ATAPI_8070 0x05 -#define US_SC_SCSI 0x06 - -#define US_PR_BULK 0x50 /* bulk-only transport */ -#define US_PR_UAS 0x62 /* usb attached scsi */ - -/**************************************************************** - * function defs - ****************************************************************/ - -// usb.c -int usb_send_bulk(struct usb_pipe *pipe, int dir, void *data, int datasize); -int usb_poll_intr(struct usb_pipe *pipe, void *data); -int usb_32bit_pipe(struct usb_pipe *pipe_fl); -struct usb_pipe *usb_alloc_pipe(struct usbdevice_s *usbdev - , struct usb_endpoint_descriptor *epdesc); -void usb_free_pipe(struct usbdevice_s *usbdev, struct usb_pipe *pipe); -int usb_send_default_control(struct usb_pipe *pipe - , const struct usb_ctrlrequest *req, void *data); -int usb_is_freelist(struct usb_s *cntl, struct usb_pipe *pipe); -void usb_add_freelist(struct usb_pipe *pipe); -struct usb_pipe *usb_get_freelist(struct usb_s *cntl, u8 eptype); -void usb_desc2pipe(struct usb_pipe *pipe, struct usbdevice_s *usbdev - , struct usb_endpoint_descriptor *epdesc); -int usb_get_period(struct usbdevice_s *usbdev - , struct usb_endpoint_descriptor *epdesc); -int usb_xfer_time(struct usb_pipe *pipe, int datalen); -struct usb_endpoint_descriptor *usb_find_desc(struct usbdevice_s *usbdev - , int type, int dir); -void usb_enumerate(struct usbhub_s *hub); -void usb_setup(void); - -#endif // usb.h diff --git a/payloads/external/SeaBIOS/src/hw/virtio-blk.c b/payloads/external/SeaBIOS/src/hw/virtio-blk.c deleted file mode 100644 index 3b198965..00000000 --- a/payloads/external/SeaBIOS/src/hw/virtio-blk.c +++ /dev/null @@ -1,293 +0,0 @@ -// Virtio block boot support. -// -// Copyright (C) 2010 Red Hat Inc. -// -// Authors: -// Gleb Natapov <gnatapov@redhat.com> -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "biosvar.h" // GET_GLOBALFLAT -#include "config.h" // CONFIG_* -#include "block.h" // struct drive_s -#include "malloc.h" // free -#include "output.h" // dprintf -#include "pcidevice.h" // foreachpci -#include "pci_ids.h" // PCI_DEVICE_ID_VIRTIO_BLK -#include "pci_regs.h" // PCI_VENDOR_ID -#include "stacks.h" // run_thread -#include "std/disk.h" // DISK_RET_SUCCESS -#include "string.h" // memset -#include "util.h" // usleep, bootprio_find_pci_device, is_bootprio_strict -#include "virtio-pci.h" -#include "virtio-mmio.h" -#include "virtio-ring.h" -#include "virtio-blk.h" - -struct virtiodrive_s { - struct drive_s drive; - struct vring_virtqueue *vq; - struct vp_device vp; -}; - -static int -virtio_blk_op(struct disk_op_s *op, int write) -{ - struct virtiodrive_s *vdrive = - container_of(op->drive_fl, struct virtiodrive_s, drive); - struct vring_virtqueue *vq = vdrive->vq; - struct virtio_blk_outhdr hdr = { - .type = write ? VIRTIO_BLK_T_OUT : VIRTIO_BLK_T_IN, - .ioprio = 0, - .sector = op->lba, - }; - u8 status = VIRTIO_BLK_S_UNSUPP; - struct vring_list sg[] = { - { - .addr = (void*)(&hdr), - .length = sizeof(hdr), - }, - { - .addr = op->buf_fl, - .length = vdrive->drive.blksize * op->count, - }, - { - .addr = (void*)(&status), - .length = sizeof(status), - }, - }; - - /* Add to virtqueue and kick host */ - if (write) - vring_add_buf(vq, sg, 2, 1, 0, 0); - else - vring_add_buf(vq, sg, 1, 2, 0, 0); - vring_kick(&vdrive->vp, vq, 1); - - /* Wait for reply */ - while (!vring_more_used(vq)) - usleep(5); - - /* Reclaim virtqueue element */ - vring_get_buf(vq, NULL); - - /* Clear interrupt status register. Avoid leaving interrupts stuck if - * VRING_AVAIL_F_NO_INTERRUPT was ignored and interrupts were raised. - */ - vp_get_isr(&vdrive->vp); - - return status == VIRTIO_BLK_S_OK ? DISK_RET_SUCCESS : DISK_RET_EBADTRACK; -} - -int -virtio_blk_process_op(struct disk_op_s *op) -{ - if (! CONFIG_VIRTIO_BLK) - return 0; - switch (op->command) { - case CMD_READ: - return virtio_blk_op(op, 0); - case CMD_WRITE: - return virtio_blk_op(op, 1); - default: - return default_process_op(op); - } -} - -static void -init_virtio_blk(void *data) -{ - struct pci_device *pci = data; - u8 status = VIRTIO_CONFIG_S_ACKNOWLEDGE | VIRTIO_CONFIG_S_DRIVER; - dprintf(1, "found virtio-blk at %pP\n", pci); - struct virtiodrive_s *vdrive = malloc_low(sizeof(*vdrive)); - if (!vdrive) { - warn_noalloc(); - return; - } - memset(vdrive, 0, sizeof(*vdrive)); - vdrive->drive.type = DTYPE_VIRTIO_BLK; - vdrive->drive.cntl_id = pci->bdf; - - vp_init_simple(&vdrive->vp, pci); - if (vp_find_vq(&vdrive->vp, 0, &vdrive->vq) < 0 ) { - dprintf(1, "fail to find vq for virtio-blk %pP\n", pci); - goto fail; - } - - if (vdrive->vp.use_modern) { - struct vp_device *vp = &vdrive->vp; - u64 features = vp_get_features(vp); - u64 version1 = 1ull << VIRTIO_F_VERSION_1; - u64 iommu_platform = 1ull << VIRTIO_F_IOMMU_PLATFORM; - u64 blk_size = 1ull << VIRTIO_BLK_F_BLK_SIZE; - if (!(features & version1)) { - dprintf(1, "modern device without virtio_1 feature bit: %pP\n", pci); - goto fail; - } - - features = features & (version1 | iommu_platform | blk_size); - vp_set_features(vp, features); - status |= VIRTIO_CONFIG_S_FEATURES_OK; - vp_set_status(vp, status); - if (!(vp_get_status(vp) & VIRTIO_CONFIG_S_FEATURES_OK)) { - dprintf(1, "device didn't accept features: %pP\n", pci); - goto fail; - } - - vdrive->drive.sectors = - vp_read(&vp->device, struct virtio_blk_config, capacity); - if (features & blk_size) { - vdrive->drive.blksize = - vp_read(&vp->device, struct virtio_blk_config, blk_size); - } else { - vdrive->drive.blksize = DISK_SECTOR_SIZE; - } - if (vdrive->drive.blksize != DISK_SECTOR_SIZE) { - dprintf(1, "virtio-blk %pP block size %d is unsupported\n", - pci, vdrive->drive.blksize); - goto fail; - } - dprintf(3, "virtio-blk %pP blksize=%d sectors=%u\n", - pci, vdrive->drive.blksize, (u32)vdrive->drive.sectors); - - vdrive->drive.pchs.cylinder = - vp_read(&vp->device, struct virtio_blk_config, cylinders); - vdrive->drive.pchs.head = - vp_read(&vp->device, struct virtio_blk_config, heads); - vdrive->drive.pchs.sector = - vp_read(&vp->device, struct virtio_blk_config, sectors); - } else { - struct virtio_blk_config cfg; - vp_get_legacy(&vdrive->vp, 0, &cfg, sizeof(cfg)); - - u64 f = vp_get_features(&vdrive->vp); - vdrive->drive.blksize = (f & (1 << VIRTIO_BLK_F_BLK_SIZE)) ? - cfg.blk_size : DISK_SECTOR_SIZE; - - vdrive->drive.sectors = cfg.capacity; - dprintf(3, "virtio-blk %pP blksize=%d sectors=%u\n", - pci, vdrive->drive.blksize, (u32)vdrive->drive.sectors); - - if (vdrive->drive.blksize != DISK_SECTOR_SIZE) { - dprintf(1, "virtio-blk %pP block size %d is unsupported\n", - pci, vdrive->drive.blksize); - goto fail; - } - vdrive->drive.pchs.cylinder = cfg.cylinders; - vdrive->drive.pchs.head = cfg.heads; - vdrive->drive.pchs.sector = cfg.sectors; - } - - char *desc = znprintf(MAXDESCSIZE, "Virtio disk PCI:%pP", pci); - boot_add_hd(&vdrive->drive, desc, bootprio_find_pci_device(pci)); - - status |= VIRTIO_CONFIG_S_DRIVER_OK; - vp_set_status(&vdrive->vp, status); - - boot_lchs_find_pci_device(pci, &vdrive->drive.lchs); - return; - -fail: - vp_reset(&vdrive->vp); - free(vdrive->vq); - free(vdrive); -} - -void -init_virtio_blk_mmio(void *mmio) -{ - u8 status = VIRTIO_CONFIG_S_ACKNOWLEDGE | VIRTIO_CONFIG_S_DRIVER; - dprintf(1, "found virtio-blk-mmio at %p\n", mmio); - struct virtiodrive_s *vdrive = malloc_low(sizeof(*vdrive)); - if (!vdrive) { - warn_noalloc(); - return; - } - memset(vdrive, 0, sizeof(*vdrive)); - vdrive->drive.type = DTYPE_VIRTIO_BLK; - vdrive->drive.cntl_id = (u32)mmio; - - vp_init_mmio(&vdrive->vp, mmio); - if (vp_find_vq(&vdrive->vp, 0, &vdrive->vq) < 0 ) { - dprintf(1, "fail to find vq for virtio-blk-mmio %p\n", mmio); - goto fail; - } - - struct vp_device *vp = &vdrive->vp; - u64 features = vp_get_features(vp); - u64 version1 = 1ull << VIRTIO_F_VERSION_1; - u64 blk_size = 1ull << VIRTIO_BLK_F_BLK_SIZE; - - features = features & (version1 | blk_size); - vp_set_features(vp, features); - status |= VIRTIO_CONFIG_S_FEATURES_OK; - vp_set_status(vp, status); - if (!(vp_get_status(vp) & VIRTIO_CONFIG_S_FEATURES_OK)) { - dprintf(1, "device didn't accept features: %p\n", mmio); - goto fail; - } - - vdrive->drive.sectors = - vp_read(&vp->device, struct virtio_blk_config, capacity); - if (features & blk_size) { - vdrive->drive.blksize = - vp_read(&vp->device, struct virtio_blk_config, blk_size); - } else { - vdrive->drive.blksize = DISK_SECTOR_SIZE; - } - if (vdrive->drive.blksize != DISK_SECTOR_SIZE) { - dprintf(1, "virtio-blk-mmio %p block size %d is unsupported\n", - mmio, vdrive->drive.blksize); - goto fail; - } - dprintf(1, "virtio-blk-mmio %p blksize=%d sectors=%u\n", - mmio, vdrive->drive.blksize, (u32)vdrive->drive.sectors); - - vdrive->drive.pchs.cylinder = - vp_read(&vp->device, struct virtio_blk_config, cylinders); - vdrive->drive.pchs.head = - vp_read(&vp->device, struct virtio_blk_config, heads); - vdrive->drive.pchs.sector = - vp_read(&vp->device, struct virtio_blk_config, sectors); - - char *desc = znprintf(MAXDESCSIZE, "Virtio disk mmio:%p", mmio); - boot_add_hd(&vdrive->drive, desc, bootprio_find_mmio_device(mmio)); - - status |= VIRTIO_CONFIG_S_DRIVER_OK; - vp_set_status(&vdrive->vp, status); - return; - -fail: - vp_reset(&vdrive->vp); - free(vdrive->vq); - free(vdrive); -} - -void -virtio_blk_setup(void) -{ - u8 skip_nonbootable = is_bootprio_strict(); - - ASSERT32FLAT(); - if (! CONFIG_VIRTIO_BLK) - return; - - dprintf(3, "init virtio-blk\n"); - - struct pci_device *pci; - foreachpci(pci) { - if (pci->vendor != PCI_VENDOR_ID_REDHAT_QUMRANET || - (pci->device != PCI_DEVICE_ID_VIRTIO_BLK_09 && - pci->device != PCI_DEVICE_ID_VIRTIO_BLK_10)) - continue; - - if (skip_nonbootable && bootprio_find_pci_device(pci) < 0) { - dprintf(1, "skipping init of a non-bootable virtio-blk at %pP\n", - pci); - continue; - } - - run_thread(init_virtio_blk, pci); - } -} diff --git a/payloads/external/SeaBIOS/src/hw/virtio-blk.h b/payloads/external/SeaBIOS/src/hw/virtio-blk.h deleted file mode 100644 index d20461a2..00000000 --- a/payloads/external/SeaBIOS/src/hw/virtio-blk.h +++ /dev/null @@ -1,44 +0,0 @@ -#ifndef _VIRTIO_BLK_H -#define _VIRTIO_BLK_H - -struct virtio_blk_config -{ - u64 capacity; - u32 size_max; - u32 seg_max; - u16 cylinders; - u8 heads; - u8 sectors; - u32 blk_size; - u8 physical_block_exp; - u8 alignment_offset; - u16 min_io_size; - u32 opt_io_size; -} __attribute__((packed)); - -#define VIRTIO_BLK_F_BLK_SIZE 6 - -/* These two define direction. */ -#define VIRTIO_BLK_T_IN 0 -#define VIRTIO_BLK_T_OUT 1 - -/* This is the first element of the read scatter-gather list. */ -struct virtio_blk_outhdr { - /* VIRTIO_BLK_T* */ - u32 type; - /* io priority. */ - u32 ioprio; - /* Sector (ie. 512 byte offset) */ - u64 sector; -}; - -#define VIRTIO_BLK_S_OK 0 -#define VIRTIO_BLK_S_IOERR 1 -#define VIRTIO_BLK_S_UNSUPP 2 - -struct disk_op_s; -int virtio_blk_process_op(struct disk_op_s *op); -void virtio_blk_setup(void); -void init_virtio_blk_mmio(void *mmio); - -#endif /* _VIRTIO_BLK_H */ diff --git a/payloads/external/SeaBIOS/src/hw/virtio-mmio.c b/payloads/external/SeaBIOS/src/hw/virtio-mmio.c deleted file mode 100644 index 44344a49..00000000 --- a/payloads/external/SeaBIOS/src/hw/virtio-mmio.c +++ /dev/null @@ -1,97 +0,0 @@ -#include "config.h" // CONFIG_DEBUG_LEVEL -#include "malloc.h" // free -#include "output.h" // dprintf -#include "stacks.h" // run_thread -#include "string.h" // memset -#include "util.h" // acpi_dsdt_* -#include "virtio-pci.h" -#include "virtio-blk.h" -#include "virtio-scsi.h" -#include "virtio-ring.h" -#include "virtio-mmio.h" - -void virtio_mmio_setup_acpi(void) -{ - static const char *virtio_hid = "LNRO0005"; - struct acpi_device *dev; - u64 mem, irq, unused; - - for (dev = acpi_dsdt_find_string(NULL, virtio_hid); - dev != NULL; - dev = acpi_dsdt_find_string(dev, virtio_hid)) { - if (acpi_dsdt_find_mem(dev, &mem, &unused) < 0) - continue; - if (acpi_dsdt_find_irq(dev, &irq) < 0) - continue; - dprintf(1, "ACPI: virtio-mmio device %s at 0x%llx, irq %lld\n", - acpi_dsdt_name(dev), mem, irq); - virtio_mmio_setup_one(mem); - } -} - -void virtio_mmio_setup_one(u64 addr) -{ - static const char *names[] = { - [ 1 ] = "net", - [ 2 ] = "blk", - [ 3 ] = "console", - [ 4 ] = "rng", - [ 8 ] = "scsi", - [ 9 ] = "9p", - [ 16 ] = "gpu", - [ 19 ] = "vsock", - [ 18 ] = "input", - [ 26 ] = "fs", - }; - const char *name; - u32 magic, version, devid; - void *mmio; - - if (addr >= 0x100000000) { - dprintf(1, "virtio-mmio: %llx: above 4G\n", addr); - return; - } - - mmio = (void*)(u32)(addr); - magic = readl(mmio); - if (magic != 0x74726976) { - dprintf(1, "virtio-mmio: %llx: magic mismatch\n", addr); - return; - } - version = readl(mmio+4); - if (version != 1 /* legacy */ && - version != 2 /* 1.0 */) { - dprintf(1, "virtio-mmio: %llx: unknown version %d\n", addr, version); - return; - } - devid = readl(mmio+8); - - name = (devid < ARRAY_SIZE(names) && names[devid] != NULL) - ? names[devid] : "unknown"; - dprintf(1, "virtio-mmio: %llx: device id %x (%s%s)\n", - addr, devid, name, version == 1 ? ", legacy" : ""); - - switch (devid) { - case 2: /* blk */ - run_thread(init_virtio_blk_mmio, mmio); - break; - case 8: /* scsi */ - run_thread(init_virtio_scsi_mmio, mmio); - break; - default: - break; - } -} - -void vp_init_mmio(struct vp_device *vp, void *mmio) -{ - memset(vp, 0, sizeof(*vp)); - vp->use_mmio = 1; - vp->common.mode = VP_ACCESS_MMIO; - vp->common.memaddr = mmio; - vp->device.mode = VP_ACCESS_MMIO; - vp->device.memaddr = mmio + 0x100; - vp_reset(vp); - vp_set_status(vp, VIRTIO_CONFIG_S_ACKNOWLEDGE | - VIRTIO_CONFIG_S_DRIVER); -} diff --git a/payloads/external/SeaBIOS/src/hw/virtio-mmio.h b/payloads/external/SeaBIOS/src/hw/virtio-mmio.h deleted file mode 100644 index 69fbd23c..00000000 --- a/payloads/external/SeaBIOS/src/hw/virtio-mmio.h +++ /dev/null @@ -1,77 +0,0 @@ -#ifndef _VIRTIO_MMIO_H -#define _VIRTIO_MMIO_H - -struct vp_device; - -typedef struct virtio_mmio_cfg { - u32 magic; - u32 version; - u32 device_id; - u32 vendor_id; - - u32 device_feature; - u32 device_feature_select; - u32 res_18; - u32 res_1c; - - u32 guest_feature; - u32 guest_feature_select; - u32 legacy_guest_page_size; - u32 res_2c; - - u32 queue_select; - u32 queue_num_max; - u32 queue_num; - u32 legacy_queue_align; - - u32 legacy_queue_pfn; - u32 queue_ready; - u32 res_48; - u32 res_4c; - - u32 queue_notify; - u32 res_54; - u32 res_58; - u32 res_5c; - - u32 irq_status; - u32 irq_ack; - u32 res_68; - u32 res_6c; - - u32 device_status; - u32 res_74; - u32 res_78; - u32 res_7c; - - u32 queue_desc_lo; - u32 queue_desc_hi; - u32 res_88; - u32 res_8c; - - u32 queue_driver_lo; - u32 queue_driver_hi; - u32 res_98; - u32 res_9c; - - u32 queue_device_lo; - u32 queue_device_hi; - u32 res_a8; - u32 shm_sel; - - u32 shmem_len_lo; - u32 shmem_len_hi; - u32 shmem_base_lo; - u32 shmem_base_hi; - - u32 res_c0_f7[14]; - - u32 res_f8; - u32 config_generation; -} virtio_mmio_cfg; - -void virtio_mmio_setup_acpi(void); -void virtio_mmio_setup_one(u64 mmio); -void vp_init_mmio(struct vp_device *vp, void *mmio); - -#endif /* _VIRTIO_MMIO_H */ diff --git a/payloads/external/SeaBIOS/src/hw/virtio-pci.c b/payloads/external/SeaBIOS/src/hw/virtio-pci.c deleted file mode 100644 index 213c4977..00000000 --- a/payloads/external/SeaBIOS/src/hw/virtio-pci.c +++ /dev/null @@ -1,545 +0,0 @@ -/* virtio-pci.c - pci interface for virtio interface - * - * (c) Copyright 2008 Bull S.A.S. - * - * Author: Laurent Vivier <Laurent.Vivier@bull.net> - * - * some parts from Linux Virtio PCI driver - * - * Copyright IBM Corp. 2007 - * Authors: Anthony Liguori <aliguori@us.ibm.com> - * - * Adopted for Seabios: Gleb Natapov <gleb@redhat.com> - * - * This work is licensed under the terms of the GNU LGPLv3 - * See the COPYING file in the top-level directory. - */ - -#include "config.h" // CONFIG_DEBUG_LEVEL -#include "malloc.h" // free -#include "output.h" // dprintf -#include "pci.h" // pci_config_readl -#include "pcidevice.h" // struct pci_device -#include "pci_regs.h" // PCI_BASE_ADDRESS_0 -#include "string.h" // memset -#include "virtio-pci.h" -#include "virtio-mmio.h" -#include "virtio-ring.h" - -u64 _vp_read(struct vp_cap *cap, u32 offset, u8 size) -{ - u64 var = 0; - - switch (cap->mode) { - case VP_ACCESS_IO: - { - u32 addr = cap->ioaddr + offset; - switch (size) { - case 8: - var = inl(addr); - var |= (u64)inl(addr+4) << 32; - break; - case 4: - var = inl(addr); - break; - case 2: - var = inw(addr); - break; - case 1: - var = inb(addr); - break; - } - break; - } - - case VP_ACCESS_MMIO: - { - void *addr = cap->memaddr + offset; - switch (size) { - case 8: - var = readl(addr); - var |= (u64)readl(addr+4) << 32; - break; - case 4: - var = readl(addr); - break; - case 2: - var = readw(addr); - break; - case 1: - var = readb(addr); - break; - } - break; - } - - case VP_ACCESS_PCICFG: - { - u32 addr = cap->baroff + offset; - pci_config_writeb(cap->bdf, cap->cfg + - offsetof(struct virtio_pci_cfg_cap, cap.bar), - cap->bar); - pci_config_writel(cap->bdf, cap->cfg + - offsetof(struct virtio_pci_cfg_cap, cap.offset), - addr); - pci_config_writel(cap->bdf, cap->cfg + - offsetof(struct virtio_pci_cfg_cap, cap.length), - (size > 4) ? 4 : size); - switch (size) { - case 8: - var = pci_config_readl(cap->bdf, cap->cfg + - offsetof(struct virtio_pci_cfg_cap, pci_cfg_data)); - pci_config_writel(cap->bdf, cap->cfg + - offsetof(struct virtio_pci_cfg_cap, cap.offset), - addr + 4); - var |= (u64)pci_config_readl(cap->bdf, cap->cfg + - offsetof(struct virtio_pci_cfg_cap, pci_cfg_data)) << 32; - break; - case 4: - var = pci_config_readl(cap->bdf, cap->cfg + - offsetof(struct virtio_pci_cfg_cap, pci_cfg_data)); - break; - case 2: - var = pci_config_readw(cap->bdf, cap->cfg + - offsetof(struct virtio_pci_cfg_cap, pci_cfg_data)); - break; - case 1: - var = pci_config_readb(cap->bdf, cap->cfg + - offsetof(struct virtio_pci_cfg_cap, pci_cfg_data)); - break; - } - } - } - dprintf(9, "vp read %x (%d) -> 0x%llx\n", cap->ioaddr + offset, size, var); - return var; -} - -void _vp_write(struct vp_cap *cap, u32 offset, u8 size, u64 var) -{ - dprintf(9, "vp write %x (%d) <- 0x%llx\n", cap->ioaddr + offset, size, var); - - switch (cap->mode) { - case VP_ACCESS_IO: - { - u32 addr = cap->ioaddr + offset; - switch (size) { - case 4: - outl(var, addr); - break; - case 2: - outw(var, addr); - break; - case 1: - outb(var, addr); - break; - } - break; - } - - case VP_ACCESS_MMIO: - { - void *addr = cap->memaddr + offset; - switch (size) { - case 4: - writel(addr, var); - break; - case 2: - writew(addr, var); - break; - case 1: - writeb(addr, var); - break; - } - break; - } - - case VP_ACCESS_PCICFG: - { - u32 addr = cap->baroff + offset; - pci_config_writeb(cap->bdf, cap->cfg + - offsetof(struct virtio_pci_cfg_cap, cap.bar), - cap->bar); - pci_config_writel(cap->bdf, cap->cfg + - offsetof(struct virtio_pci_cfg_cap, cap.offset), - addr); - pci_config_writel(cap->bdf, cap->cfg + - offsetof(struct virtio_pci_cfg_cap, cap.length), - size); - switch (size) { - case 4: - pci_config_writel(cap->bdf, cap->cfg + - offsetof(struct virtio_pci_cfg_cap, pci_cfg_data), - var); - break; - case 2: - pci_config_writew(cap->bdf, cap->cfg + - offsetof(struct virtio_pci_cfg_cap, pci_cfg_data), - var); - break; - case 1: - pci_config_writeb(cap->bdf, cap->cfg + - offsetof(struct virtio_pci_cfg_cap, pci_cfg_data), - var); - break; - } - } - } -} - -u64 vp_get_features(struct vp_device *vp) -{ - u32 f0, f1; - - if (vp->use_mmio) { - vp_write(&vp->common, virtio_mmio_cfg, device_feature_select, 0); - f0 = vp_read(&vp->common, virtio_mmio_cfg, device_feature); - f1 = 0; - } else if (vp->use_modern) { - vp_write(&vp->common, virtio_pci_common_cfg, device_feature_select, 0); - f0 = vp_read(&vp->common, virtio_pci_common_cfg, device_feature); - vp_write(&vp->common, virtio_pci_common_cfg, device_feature_select, 1); - f1 = vp_read(&vp->common, virtio_pci_common_cfg, device_feature); - } else { - f0 = vp_read(&vp->legacy, virtio_pci_legacy, host_features); - f1 = 0; - } - return ((u64)f1 << 32) | f0; -} - -void vp_set_features(struct vp_device *vp, u64 features) -{ - u32 f0, f1; - - f0 = features; - f1 = features >> 32; - - if (vp->use_mmio) { - vp_write(&vp->common, virtio_mmio_cfg, guest_feature_select, f0); - vp_write(&vp->common, virtio_mmio_cfg, guest_feature, f0); - } else if (vp->use_modern) { - vp_write(&vp->common, virtio_pci_common_cfg, guest_feature_select, 0); - vp_write(&vp->common, virtio_pci_common_cfg, guest_feature, f0); - vp_write(&vp->common, virtio_pci_common_cfg, guest_feature_select, 1); - vp_write(&vp->common, virtio_pci_common_cfg, guest_feature, f1); - } else { - vp_write(&vp->legacy, virtio_pci_legacy, guest_features, f0); - } -} - -u8 vp_get_status(struct vp_device *vp) -{ - if (vp->use_mmio) { - return vp_read(&vp->common, virtio_mmio_cfg, device_status); - } else if (vp->use_modern) { - return vp_read(&vp->common, virtio_pci_common_cfg, device_status); - } else { - return vp_read(&vp->legacy, virtio_pci_legacy, status); - } -} - -void vp_set_status(struct vp_device *vp, u8 status) -{ - if (status == 0) /* reset */ - return; - if (vp->use_mmio) { - vp_write(&vp->common, virtio_mmio_cfg, device_status, status); - } else if (vp->use_modern) { - vp_write(&vp->common, virtio_pci_common_cfg, device_status, status); - } else { - vp_write(&vp->legacy, virtio_pci_legacy, status, status); - } -} - -u8 vp_get_isr(struct vp_device *vp) -{ - if (vp->use_mmio) { - return vp_read(&vp->common, virtio_mmio_cfg, irq_status); - } else if (vp->use_modern) { - return vp_read(&vp->isr, virtio_pci_isr, isr); - } else { - return vp_read(&vp->legacy, virtio_pci_legacy, isr); - } -} - -void vp_reset(struct vp_device *vp) -{ - if (vp->use_mmio) { - vp_write(&vp->common, virtio_mmio_cfg, device_status, 0); - vp_read(&vp->common, virtio_mmio_cfg, irq_status); - } else if (vp->use_modern) { - vp_write(&vp->common, virtio_pci_common_cfg, device_status, 0); - vp_read(&vp->isr, virtio_pci_isr, isr); - } else { - vp_write(&vp->legacy, virtio_pci_legacy, status, 0); - vp_read(&vp->legacy, virtio_pci_legacy, isr); - } -} - -void vp_notify(struct vp_device *vp, struct vring_virtqueue *vq) -{ - if (vp->use_mmio) { - vp_write(&vp->common, virtio_mmio_cfg, queue_notify, vq->queue_index); - } else if (vp->use_modern) { - u32 offset = vq->queue_notify_off * vp->notify_off_multiplier; - switch (vp->notify.mode) { - case VP_ACCESS_IO: - outw(vq->queue_index, vp->notify.ioaddr + offset); - break; - case VP_ACCESS_MMIO: - writew(vp->notify.memaddr + offset, vq->queue_index); - break; - case VP_ACCESS_PCICFG: - pci_config_writeb(vp->notify.bdf, vp->notify.cfg + - offsetof(struct virtio_pci_cfg_cap, cap.bar), - vp->notify.bar); - pci_config_writel(vp->notify.bdf, vp->notify.cfg + - offsetof(struct virtio_pci_cfg_cap, cap.offset), - vp->notify.baroff + offset); - pci_config_writel(vp->notify.bdf, vp->notify.cfg + - offsetof(struct virtio_pci_cfg_cap, cap.length), - 2); - pci_config_writew(vp->notify.bdf, vp->notify.cfg + - offsetof(struct virtio_pci_cfg_cap, pci_cfg_data), - vq->queue_index); - } - dprintf(9, "vp notify %x (%d) -- 0x%x\n", - vp->notify.ioaddr, 2, vq->queue_index); - } else { - vp_write(&vp->legacy, virtio_pci_legacy, queue_notify, vq->queue_index); - } -} - -int vp_find_vq(struct vp_device *vp, int queue_index, - struct vring_virtqueue **p_vq) -{ - u16 num; - - ASSERT32FLAT(); - struct vring_virtqueue *vq = *p_vq = memalign_high(PAGE_SIZE, sizeof(*vq)); - if (!vq) { - warn_noalloc(); - goto fail; - } - memset(vq, 0, sizeof(*vq)); - - - /* select the queue */ - if (vp->use_mmio) { - vp_write(&vp->common, virtio_mmio_cfg, queue_select, queue_index); - } else if (vp->use_modern) { - vp_write(&vp->common, virtio_pci_common_cfg, queue_select, queue_index); - } else { - vp_write(&vp->legacy, virtio_pci_legacy, queue_sel, queue_index); - } - - /* check if the queue is available */ - if (vp->use_mmio) { - num = vp_read(&vp->common, virtio_mmio_cfg, queue_num_max); - if (num > MAX_QUEUE_NUM) - num = MAX_QUEUE_NUM; - vp_write(&vp->common, virtio_mmio_cfg, queue_num, num); - } else if (vp->use_modern) { - num = vp_read(&vp->common, virtio_pci_common_cfg, queue_size); - if (num > MAX_QUEUE_NUM) { - vp_write(&vp->common, virtio_pci_common_cfg, queue_size, - MAX_QUEUE_NUM); - num = vp_read(&vp->common, virtio_pci_common_cfg, queue_size); - } - } else { - num = vp_read(&vp->legacy, virtio_pci_legacy, queue_num); - } - if (!num) { - dprintf(1, "ERROR: queue size is 0\n"); - goto fail; - } - if (num > MAX_QUEUE_NUM) { - dprintf(1, "ERROR: queue size %d > %d\n", num, MAX_QUEUE_NUM); - goto fail; - } - - /* check if the queue is already active */ - if (vp->use_mmio) { - /* TODO */; - } else if (vp->use_modern) { - if (vp_read(&vp->common, virtio_pci_common_cfg, queue_enable)) { - dprintf(1, "ERROR: queue already active\n"); - goto fail; - } - } else { - if (vp_read(&vp->legacy, virtio_pci_legacy, queue_pfn)) { - dprintf(1, "ERROR: queue already active\n"); - goto fail; - } - } - vq->queue_index = queue_index; - - /* initialize the queue */ - struct vring * vr = &vq->vring; - vring_init(vr, num, (unsigned char*)&vq->queue); - - /* activate the queue - * - * NOTE: vr->desc is initialized by vring_init() - */ - - if (vp->use_mmio) { - if (vp_read(&vp->common, virtio_mmio_cfg, version) == 2) { - vp_write(&vp->common, virtio_mmio_cfg, queue_desc_lo, - (unsigned long)virt_to_phys(vr->desc)); - vp_write(&vp->common, virtio_mmio_cfg, queue_desc_hi, 0); - vp_write(&vp->common, virtio_mmio_cfg, queue_driver_lo, - (unsigned long)virt_to_phys(vr->avail)); - vp_write(&vp->common, virtio_mmio_cfg, queue_driver_hi, 0); - vp_write(&vp->common, virtio_mmio_cfg, queue_device_lo, - (unsigned long)virt_to_phys(vr->used)); - vp_write(&vp->common, virtio_mmio_cfg, queue_device_hi, 0); - vp_write(&vp->common, virtio_mmio_cfg, queue_ready, 1); - } else { - vp_write(&vp->common, virtio_mmio_cfg, legacy_guest_page_size, - (unsigned long)1 << PAGE_SHIFT); - vp_write(&vp->common, virtio_mmio_cfg, legacy_queue_pfn, - (unsigned long)virt_to_phys(vr->desc) >> PAGE_SHIFT); - } - } else if (vp->use_modern) { - vp_write(&vp->common, virtio_pci_common_cfg, queue_desc_lo, - (unsigned long)virt_to_phys(vr->desc)); - vp_write(&vp->common, virtio_pci_common_cfg, queue_desc_hi, 0); - vp_write(&vp->common, virtio_pci_common_cfg, queue_avail_lo, - (unsigned long)virt_to_phys(vr->avail)); - vp_write(&vp->common, virtio_pci_common_cfg, queue_avail_hi, 0); - vp_write(&vp->common, virtio_pci_common_cfg, queue_used_lo, - (unsigned long)virt_to_phys(vr->used)); - vp_write(&vp->common, virtio_pci_common_cfg, queue_used_hi, 0); - vp_write(&vp->common, virtio_pci_common_cfg, queue_enable, 1); - vq->queue_notify_off = vp_read(&vp->common, virtio_pci_common_cfg, - queue_notify_off); - } else { - vp_write(&vp->legacy, virtio_pci_legacy, queue_pfn, - (unsigned long)virt_to_phys(vr->desc) >> PAGE_SHIFT); - } - return num; - -fail: - free(vq); - *p_vq = NULL; - return -1; -} - -void vp_init_simple(struct vp_device *vp, struct pci_device *pci) -{ - u8 cap = pci_find_capability(pci->bdf, PCI_CAP_ID_VNDR, 0); - struct vp_cap *vp_cap; - const char *mode; - u32 offset, base, mul; - u64 addr; - u8 type; - - memset(vp, 0, sizeof(*vp)); - while (cap != 0) { - type = pci_config_readb(pci->bdf, cap + - offsetof(struct virtio_pci_cap, cfg_type)); - switch (type) { - case VIRTIO_PCI_CAP_COMMON_CFG: - vp_cap = &vp->common; - break; - case VIRTIO_PCI_CAP_NOTIFY_CFG: - vp_cap = &vp->notify; - mul = offsetof(struct virtio_pci_notify_cap, notify_off_multiplier); - vp->notify_off_multiplier = pci_config_readl(pci->bdf, cap + mul); - break; - case VIRTIO_PCI_CAP_ISR_CFG: - vp_cap = &vp->isr; - break; - case VIRTIO_PCI_CAP_DEVICE_CFG: - vp_cap = &vp->device; - break; - case VIRTIO_PCI_CAP_PCI_CFG: - vp->common.cfg = cap; - vp->common.bdf = pci->bdf; - vp->notify.cfg = cap; - vp->notify.bdf = pci->bdf; - vp->isr.cfg = cap; - vp->isr.bdf = pci->bdf; - vp->device.cfg = cap; - vp->device.bdf = pci->bdf; - vp_cap = NULL; - dprintf(1, "pci dev %pP virtio cap at 0x%x type %d" - " [pci cfg access]\n", pci, cap, type); - break; - default: - vp_cap = NULL; - break; - } - if (vp_cap && !vp_cap->cap) { - vp_cap->cap = cap; - vp_cap->bar = pci_config_readb(pci->bdf, cap + - offsetof(struct virtio_pci_cap, bar)); - offset = pci_config_readl(pci->bdf, cap + - offsetof(struct virtio_pci_cap, offset)); - base = PCI_BASE_ADDRESS_0 + 4 * vp_cap->bar; - addr = pci_config_readl(pci->bdf, base); - if (addr & PCI_BASE_ADDRESS_SPACE_IO) { - addr &= PCI_BASE_ADDRESS_IO_MASK; - vp_cap->mode = VP_ACCESS_IO; - } else if ((addr & PCI_BASE_ADDRESS_MEM_TYPE_MASK) == - PCI_BASE_ADDRESS_MEM_TYPE_64) { - addr &= PCI_BASE_ADDRESS_MEM_MASK; - addr |= (u64)pci_config_readl(pci->bdf, base + 4) << 32; - vp_cap->mode = (addr > 0xffffffffll) ? - VP_ACCESS_PCICFG : VP_ACCESS_MMIO; - } else { - addr &= PCI_BASE_ADDRESS_MEM_MASK; - vp_cap->mode = VP_ACCESS_MMIO; - } - switch (vp_cap->mode) { - case VP_ACCESS_IO: - { - u32 addr = pci_enable_iobar(pci, base); - if (!addr) - return; - vp_cap->ioaddr = addr + offset; - mode = "io"; - break; - } - case VP_ACCESS_MMIO: - { - void *addr = pci_enable_membar(pci, base); - if (!addr) - return; - vp_cap->memaddr = addr + offset; - mode = "mmio"; - break; - } - case VP_ACCESS_PCICFG: - mode = "pcicfg"; - vp_cap->baroff = offset; - break; - default: - mode = "Huh?"; - break; - } - dprintf(1, "pci dev %pP virtio cap at 0x%x type %d " - "bar %d at 0x%08llx off +0x%04x [%s]\n", - pci, vp_cap->cap, type, vp_cap->bar, addr, offset, mode); - } - - cap = pci_find_capability(pci->bdf, PCI_CAP_ID_VNDR, cap); - } - - if (vp->common.cap && vp->notify.cap && vp->isr.cap && vp->device.cap) { - dprintf(1, "pci dev %pP using modern (1.0) virtio mode\n", pci); - vp->use_modern = 1; - } else { - dprintf(1, "pci dev %pP using legacy (0.9.5) virtio mode\n", pci); - vp->legacy.bar = 0; - vp->legacy.ioaddr = pci_enable_iobar(pci, PCI_BASE_ADDRESS_0); - if (!vp->legacy.ioaddr) - return; - vp->legacy.mode = VP_ACCESS_IO; - } - - vp_reset(vp); - pci_enable_busmaster(pci); - vp_set_status(vp, VIRTIO_CONFIG_S_ACKNOWLEDGE | - VIRTIO_CONFIG_S_DRIVER ); -} diff --git a/payloads/external/SeaBIOS/src/hw/virtio-pci.h b/payloads/external/SeaBIOS/src/hw/virtio-pci.h deleted file mode 100644 index 26962644..00000000 --- a/payloads/external/SeaBIOS/src/hw/virtio-pci.h +++ /dev/null @@ -1,152 +0,0 @@ -#ifndef _VIRTIO_PCI_H -#define _VIRTIO_PCI_H - -#include "x86.h" // inl -#include "biosvar.h" // GET_LOWFLAT - -/* The bit of the ISR which indicates a device configuration change. */ -#define VIRTIO_PCI_ISR_CONFIG 0x2 - -/* Virtio ABI version, this must match exactly */ -#define VIRTIO_PCI_ABI_VERSION 0 - -/* --- virtio 0.9.5 (legacy) struct --------------------------------- */ - -typedef struct virtio_pci_legacy { - u32 host_features; - u32 guest_features; - u32 queue_pfn; - u16 queue_num; - u16 queue_sel; - u16 queue_notify; - u8 status; - u8 isr; - u8 device[]; -} virtio_pci_legacy; - -/* --- virtio 1.0 (modern) structs ---------------------------------- */ - -/* Common configuration */ -#define VIRTIO_PCI_CAP_COMMON_CFG 1 -/* Notifications */ -#define VIRTIO_PCI_CAP_NOTIFY_CFG 2 -/* ISR access */ -#define VIRTIO_PCI_CAP_ISR_CFG 3 -/* Device specific configuration */ -#define VIRTIO_PCI_CAP_DEVICE_CFG 4 -/* PCI configuration access */ -#define VIRTIO_PCI_CAP_PCI_CFG 5 - -/* This is the PCI capability header: */ -struct virtio_pci_cap { - u8 cap_vndr; /* Generic PCI field: PCI_CAP_ID_VNDR */ - u8 cap_next; /* Generic PCI field: next ptr. */ - u8 cap_len; /* Generic PCI field: capability length */ - u8 cfg_type; /* Identifies the structure. */ - u8 bar; /* Where to find it. */ - u8 padding[3]; /* Pad to full dword. */ - u32 offset; /* Offset within bar. */ - u32 length; /* Length of the structure, in bytes. */ -}; - -struct virtio_pci_notify_cap { - struct virtio_pci_cap cap; - u32 notify_off_multiplier; /* Multiplier for queue_notify_off. */ -}; - -struct virtio_pci_cfg_cap { - struct virtio_pci_cap cap; - u8 pci_cfg_data[4]; /* Data for BAR access. */ -}; - -typedef struct virtio_pci_common_cfg { - /* About the whole device. */ - u32 device_feature_select; /* read-write */ - u32 device_feature; /* read-only */ - u32 guest_feature_select; /* read-write */ - u32 guest_feature; /* read-write */ - u16 msix_config; /* read-write */ - u16 num_queues; /* read-only */ - u8 device_status; /* read-write */ - u8 config_generation; /* read-only */ - - /* About a specific virtqueue. */ - u16 queue_select; /* read-write */ - u16 queue_size; /* read-write, power of 2. */ - u16 queue_msix_vector; /* read-write */ - u16 queue_enable; /* read-write */ - u16 queue_notify_off; /* read-only */ - u32 queue_desc_lo; /* read-write */ - u32 queue_desc_hi; /* read-write */ - u32 queue_avail_lo; /* read-write */ - u32 queue_avail_hi; /* read-write */ - u32 queue_used_lo; /* read-write */ - u32 queue_used_hi; /* read-write */ -} virtio_pci_common_cfg; - -typedef struct virtio_pci_isr { - u8 isr; -} virtio_pci_isr; - -/* --- driver structs ----------------------------------------------- */ - -#define VP_ACCESS_IO 1 -#define VP_ACCESS_MMIO 2 -#define VP_ACCESS_PCICFG 3 - -struct vp_cap { - union { - void *memaddr; - u32 ioaddr; - u32 baroff; - }; - u16 bdf; - u8 cap; - u8 cfg; - u8 bar; - u8 mode; -}; - -struct vp_device { - struct vp_cap common, notify, isr, device, legacy; - u32 notify_off_multiplier; - u8 use_modern; - u8 use_mmio; -}; - -u64 _vp_read(struct vp_cap *cap, u32 offset, u8 size); -void _vp_write(struct vp_cap *cap, u32 offset, u8 size, u64 var); - -#define vp_read(_cap, _struct, _field) \ - _vp_read(_cap, offsetof(_struct, _field), \ - sizeof(((_struct *)0)->_field)) - -#define vp_write(_cap, _struct, _field, _var) \ - _vp_write(_cap, offsetof(_struct, _field), \ - sizeof(((_struct *)0)->_field), _var) - -u64 vp_get_features(struct vp_device *vp); -void vp_set_features(struct vp_device *vp, u64 features); - -static inline void vp_get_legacy(struct vp_device *vp, unsigned offset, - void *buf, unsigned len) -{ - u8 *ptr = buf; - unsigned i; - - for (i = 0; i < len; i++) - ptr[i] = vp_read(&vp->legacy, virtio_pci_legacy, device[i]); -} - -u8 vp_get_status(struct vp_device *vp); -void vp_set_status(struct vp_device *vp, u8 status); -u8 vp_get_isr(struct vp_device *vp); -void vp_reset(struct vp_device *vp); - -struct pci_device; -struct vring_virtqueue; -void vp_init_simple(struct vp_device *vp, struct pci_device *pci); -void vp_notify(struct vp_device *vp, struct vring_virtqueue *vq); -int vp_find_vq(struct vp_device *vp, int queue_index, - struct vring_virtqueue **p_vq); -#endif /* _VIRTIO_PCI_H_ */ diff --git a/payloads/external/SeaBIOS/src/hw/virtio-ring.c b/payloads/external/SeaBIOS/src/hw/virtio-ring.c deleted file mode 100644 index 0ed3189e..00000000 --- a/payloads/external/SeaBIOS/src/hw/virtio-ring.c +++ /dev/null @@ -1,147 +0,0 @@ -/* virtio-pci.c - virtio ring management - * - * (c) Copyright 2008 Bull S.A.S. - * - * Author: Laurent Vivier <Laurent.Vivier@bull.net> - * - * some parts from Linux Virtio Ring - * - * Copyright Rusty Russell IBM Corporation 2007 - * - * Adopted for Seabios: Gleb Natapov <gleb@redhat.com> - * - * This work is licensed under the terms of the GNU LGPLv3 - * See the COPYING file in the top-level directory. - * - * - */ - -#include "output.h" // panic -#include "virtio-ring.h" -#include "virtio-pci.h" - -#define BUG() do { \ - panic("BUG: failure at %d/%s()!\n", __LINE__, __func__); \ - } while (0) -#define BUG_ON(condition) do { if (condition) BUG(); } while (0) - -/* - * vring_more_used - * - * is there some used buffers ? - * - */ - -int vring_more_used(struct vring_virtqueue *vq) -{ - struct vring_used *used = vq->vring.used; - int more = vq->last_used_idx != used->idx; - /* Make sure ring reads are done after idx read above. */ - smp_rmb(); - return more; -} - -/* - * vring_free - * - * put at the begin of the free list the current desc[head] - */ - -void vring_detach(struct vring_virtqueue *vq, unsigned int head) -{ - struct vring *vr = &vq->vring; - struct vring_desc *desc = GET_LOWFLAT(vr->desc); - unsigned int i; - - /* find end of given descriptor */ - - i = head; - while (desc[i].flags & VRING_DESC_F_NEXT) - i = desc[i].next; - - /* link it with free list and point to it */ - - desc[i].next = vq->free_head; - vq->free_head = head; -} - -/* - * vring_get_buf - * - * get a buffer from the used list - * - */ - -int vring_get_buf(struct vring_virtqueue *vq, unsigned int *len) -{ - struct vring *vr = &vq->vring; - struct vring_used_elem *elem; - struct vring_used *used = vq->vring.used; - u32 id; - int ret; - -// BUG_ON(!vring_more_used(vq)); - - elem = &used->ring[vq->last_used_idx % vr->num]; - id = elem->id; - if (len != NULL) - *len = elem->len; - - ret = vq->vdata[id]; - - vring_detach(vq, id); - - vq->last_used_idx = vq->last_used_idx + 1; - - return ret; -} - -void vring_add_buf(struct vring_virtqueue *vq, - struct vring_list list[], - unsigned int out, unsigned int in, - int index, int num_added) -{ - struct vring *vr = &vq->vring; - int i, av, head, prev; - struct vring_desc *desc = vr->desc; - struct vring_avail *avail = vr->avail; - - BUG_ON(out + in == 0); - - prev = 0; - head = vq->free_head; - for (i = head; out; i = desc[i].next, out--) { - desc[i].flags = VRING_DESC_F_NEXT; - desc[i].addr = (u64)virt_to_phys(list->addr); - desc[i].len = list->length; - prev = i; - list++; - } - for ( ; in; i = desc[i].next, in--) { - desc[i].flags = VRING_DESC_F_NEXT|VRING_DESC_F_WRITE; - desc[i].addr = (u64)virt_to_phys(list->addr); - desc[i].len = list->length; - prev = i; - list++; - } - desc[prev].flags = desc[prev].flags & ~VRING_DESC_F_NEXT; - - vq->free_head = i; - - vq->vdata[head] = index; - - av = (avail->idx + num_added) % vr->num; - avail->ring[av] = head; -} - -void vring_kick(struct vp_device *vp, struct vring_virtqueue *vq, int num_added) -{ - struct vring *vr = &vq->vring; - struct vring_avail *avail = vr->avail; - - /* Make sure idx update is done after ring write. */ - smp_wmb(); - avail->idx = avail->idx + num_added; - - vp_notify(vp, vq); -} diff --git a/payloads/external/SeaBIOS/src/hw/virtio-ring.h b/payloads/external/SeaBIOS/src/hw/virtio-ring.h deleted file mode 100644 index dccc50d7..00000000 --- a/payloads/external/SeaBIOS/src/hw/virtio-ring.h +++ /dev/null @@ -1,121 +0,0 @@ -#ifndef _VIRTIO_RING_H -#define _VIRTIO_RING_H - -#include "types.h" // u64 -#include "memmap.h" // PAGE_SIZE - -/* Status byte for guest to report progress, and synchronize features. */ -/* We have seen device and processed generic fields (VIRTIO_CONFIG_F_VIRTIO) */ -#define VIRTIO_CONFIG_S_ACKNOWLEDGE 1 -/* We have found a driver for the device. */ -#define VIRTIO_CONFIG_S_DRIVER 2 -/* Driver has used its parts of the config, and is happy */ -#define VIRTIO_CONFIG_S_DRIVER_OK 4 -/* Driver has finished configuring features */ -#define VIRTIO_CONFIG_S_FEATURES_OK 8 -/* We've given up on this device. */ -#define VIRTIO_CONFIG_S_FAILED 0x80 - -/* v1.0 compliant. */ -#define VIRTIO_F_VERSION_1 32 -#define VIRTIO_F_IOMMU_PLATFORM 33 - -#define MAX_QUEUE_NUM (256) - -#define VRING_DESC_F_NEXT 1 -#define VRING_DESC_F_WRITE 2 - -#define VRING_AVAIL_F_NO_INTERRUPT 1 - -#define VRING_USED_F_NO_NOTIFY 1 - -struct vring_desc -{ - u64 addr; - u32 len; - u16 flags; - u16 next; -}; - -struct vring_avail -{ - u16 flags; - u16 idx; - u16 ring[0]; -}; - -struct vring_used_elem -{ - u32 id; - u32 len; -}; - -struct vring_used -{ - u16 flags; - u16 idx; - struct vring_used_elem ring[]; -}; - -struct vring { - unsigned int num; - struct vring_desc *desc; - struct vring_avail *avail; - struct vring_used *used; -}; - -#define vring_size(num) \ - (ALIGN(sizeof(struct vring_desc) * num + sizeof(struct vring_avail) \ - + sizeof(u16) * num, PAGE_SIZE) \ - + sizeof(struct vring_used) + sizeof(struct vring_used_elem) * num) - -typedef unsigned char virtio_queue_t[vring_size(MAX_QUEUE_NUM)]; - -struct vring_virtqueue { - virtio_queue_t queue; - struct vring vring; - u16 free_head; - u16 last_used_idx; - u16 vdata[MAX_QUEUE_NUM]; - /* PCI */ - int queue_index; - int queue_notify_off; -}; - -struct vring_list { - char *addr; - unsigned int length; -}; - -static inline void -vring_init(struct vring *vr, unsigned int num, unsigned char *queue) -{ - ASSERT32FLAT(); - vr->num = num; - - /* physical address of desc must be page aligned */ - vr->desc = (void*)ALIGN((u32)queue, PAGE_SIZE); - - vr->avail = (struct vring_avail *)&vr->desc[num]; - /* disable interrupts */ - vr->avail->flags |= VRING_AVAIL_F_NO_INTERRUPT; - - /* physical address of used must be page aligned */ - vr->used = (void*)ALIGN((u32)&vr->avail->ring[num], PAGE_SIZE); - - int i; - for (i = 0; i < num - 1; i++) - vr->desc[i].next = i + 1; - vr->desc[i].next = 0; -} - -struct vp_device; -int vring_more_used(struct vring_virtqueue *vq); -void vring_detach(struct vring_virtqueue *vq, unsigned int head); -int vring_get_buf(struct vring_virtqueue *vq, unsigned int *len); -void vring_add_buf(struct vring_virtqueue *vq, struct vring_list list[], - unsigned int out, unsigned int in, - int index, int num_added); -void vring_kick(struct vp_device *vp, struct vring_virtqueue *vq, int num_added); - -#endif /* _VIRTIO_RING_H_ */ diff --git a/payloads/external/SeaBIOS/src/hw/virtio-scsi.c b/payloads/external/SeaBIOS/src/hw/virtio-scsi.c deleted file mode 100644 index 369c9813..00000000 --- a/payloads/external/SeaBIOS/src/hw/virtio-scsi.c +++ /dev/null @@ -1,291 +0,0 @@ -// Virtio SCSI boot support. -// -// Copyright (C) 2012 Red Hat Inc. -// -// Authors: -// Paolo Bonzini <pbonzini@redhat.com> -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "block.h" // struct drive_s -#include "blockcmd.h" // scsi_drive_setup -#include "config.h" // CONFIG_* -#include "malloc.h" // free -#include "output.h" // dprintf -#include "pcidevice.h" // foreachpci -#include "pci_ids.h" // PCI_DEVICE_ID_VIRTIO_BLK -#include "pci_regs.h" // PCI_VENDOR_ID -#include "stacks.h" // run_thread -#include "std/disk.h" // DISK_RET_SUCCESS -#include "string.h" // memset -#include "util.h" // usleep, bootprio_find_pci_device, is_bootprio_strict -#include "virtio-pci.h" -#include "virtio-ring.h" -#include "virtio-scsi.h" -#include "virtio-mmio.h" - -struct virtio_lun_s { - struct drive_s drive; - struct pci_device *pci; - void *mmio; - char name[16]; - struct vring_virtqueue *vq; - struct vp_device *vp; - u16 target; - u16 lun; -}; - -int -virtio_scsi_process_op(struct disk_op_s *op) -{ - if (! CONFIG_VIRTIO_SCSI) - return 0; - struct virtio_lun_s *vlun = - container_of(op->drive_fl, struct virtio_lun_s, drive); - struct vp_device *vp = vlun->vp; - struct vring_virtqueue *vq = vlun->vq; - struct virtio_scsi_req_cmd req; - struct virtio_scsi_resp_cmd resp; - struct vring_list sg[3]; - - memset(&req, 0, sizeof(req)); - int blocksize = scsi_fill_cmd(op, req.cdb, 16); - if (blocksize < 0) - return default_process_op(op); - req.lun[0] = 1; - req.lun[1] = vlun->target; - req.lun[2] = (vlun->lun >> 8) | 0x40; - req.lun[3] = (vlun->lun & 0xff); - - u32 len = op->count * blocksize; - int datain = scsi_is_read(op); - int in_num = (datain ? 2 : 1); - int out_num = (len ? 3 : 2) - in_num; - - sg[0].addr = (void*)(&req); - sg[0].length = sizeof(req); - - sg[out_num].addr = (void*)(&resp); - sg[out_num].length = sizeof(resp); - - if (len) { - int data_idx = (datain ? 2 : 1); - sg[data_idx].addr = op->buf_fl; - sg[data_idx].length = len; - } - - /* Add to virtqueue and kick host */ - vring_add_buf(vq, sg, out_num, in_num, 0, 0); - vring_kick(vp, vq, 1); - - /* Wait for reply */ - while (!vring_more_used(vq)) - usleep(5); - - /* Reclaim virtqueue element */ - vring_get_buf(vq, NULL); - - /* Clear interrupt status register. Avoid leaving interrupts stuck if - * VRING_AVAIL_F_NO_INTERRUPT was ignored and interrupts were raised. - */ - vp_get_isr(vp); - - if (resp.response == VIRTIO_SCSI_S_OK && resp.status == 0) { - return DISK_RET_SUCCESS; - } - return DISK_RET_EBADTRACK; -} - -static void -virtio_scsi_init_lun(struct virtio_lun_s *vlun, - struct pci_device *pci, void *mmio, - struct vp_device *vp, struct vring_virtqueue *vq, - u16 target, u16 lun) -{ - memset(vlun, 0, sizeof(*vlun)); - vlun->drive.type = DTYPE_VIRTIO_SCSI; - vlun->drive.cntl_id = pci->bdf; - vlun->pci = pci; - vlun->mmio = mmio; - vlun->vp = vp; - vlun->vq = vq; - vlun->target = target; - vlun->lun = lun; - if (vlun->pci) - snprintf(vlun->name, sizeof(vlun->name), "pci:%pP", vlun->pci); - if (vlun->mmio) - snprintf(vlun->name, sizeof(vlun->name), "mmio:%08x", (u32)vlun->mmio); -} - -static int -virtio_scsi_add_lun(u32 lun, struct drive_s *tmpl_drv) -{ - u8 skip_nonbootable = is_bootprio_strict(); - struct virtio_lun_s *tmpl_vlun = - container_of(tmpl_drv, struct virtio_lun_s, drive); - int prio = -1; - - if (tmpl_vlun->pci) - prio = bootprio_find_scsi_device(tmpl_vlun->pci, tmpl_vlun->target, lun); - if (tmpl_vlun->mmio) - prio = bootprio_find_scsi_mmio_device(tmpl_vlun->mmio, tmpl_vlun->target, lun); - - if (skip_nonbootable && prio < 0) { - dprintf(1, "skipping init of a non-bootable virtio-scsi dev at %s," - " target %d, lun %d\n", - tmpl_vlun->name, tmpl_vlun->target, lun); - return -1; - } - - struct virtio_lun_s *vlun = malloc_low(sizeof(*vlun)); - if (!vlun) { - warn_noalloc(); - return -1; - } - virtio_scsi_init_lun(vlun, tmpl_vlun->pci, tmpl_vlun->mmio,tmpl_vlun->vp, - tmpl_vlun->vq, tmpl_vlun->target, lun); - - if (vlun->pci) - boot_lchs_find_scsi_device(vlun->pci, vlun->target, vlun->lun, - &(vlun->drive.lchs)); - int ret = scsi_drive_setup(&vlun->drive, "virtio-scsi", prio); - if (ret) - goto fail; - return 0; - -fail: - free(vlun); - return -1; -} - -static int -virtio_scsi_scan_target(struct pci_device *pci, void *mmio, struct vp_device *vp, - struct vring_virtqueue *vq, u16 target) -{ - - struct virtio_lun_s vlun0; - - virtio_scsi_init_lun(&vlun0, pci, mmio, vp, vq, target, 0); - - int ret = scsi_rep_luns_scan(&vlun0.drive, virtio_scsi_add_lun); - return ret < 0 ? 0 : ret; -} - -static void -init_virtio_scsi(void *data) -{ - struct pci_device *pci = data; - dprintf(1, "found virtio-scsi at %pP\n", pci); - struct vring_virtqueue *vq = NULL; - struct vp_device *vp = malloc_high(sizeof(*vp)); - if (!vp) { - warn_noalloc(); - return; - } - vp_init_simple(vp, pci); - u8 status = VIRTIO_CONFIG_S_ACKNOWLEDGE | VIRTIO_CONFIG_S_DRIVER; - - if (vp->use_modern) { - u64 features = vp_get_features(vp); - u64 version1 = 1ull << VIRTIO_F_VERSION_1; - u64 iommu_platform = 1ull << VIRTIO_F_IOMMU_PLATFORM; - if (!(features & version1)) { - dprintf(1, "modern device without virtio_1 feature bit: %pP\n", pci); - goto fail; - } - - vp_set_features(vp, features & (version1 | iommu_platform)); - status |= VIRTIO_CONFIG_S_FEATURES_OK; - vp_set_status(vp, status); - if (!(vp_get_status(vp) & VIRTIO_CONFIG_S_FEATURES_OK)) { - dprintf(1, "device didn't accept features: %pP\n", pci); - goto fail; - } - } - - if (vp_find_vq(vp, 2, &vq) < 0 ) { - dprintf(1, "fail to find vq for virtio-scsi %pP\n", pci); - goto fail; - } - - status |= VIRTIO_CONFIG_S_DRIVER_OK; - vp_set_status(vp, status); - - int i, tot; - for (tot = 0, i = 0; i < 256; i++) - tot += virtio_scsi_scan_target(pci, NULL, vp, vq, i); - - if (!tot) - goto fail; - - return; - -fail: - vp_reset(vp); - free(vp); - free(vq); -} - -void -init_virtio_scsi_mmio(void *mmio) -{ - dprintf(1, "found virtio-scsi-mmio at %p\n", mmio); - struct vring_virtqueue *vq = NULL; - struct vp_device *vp = malloc_high(sizeof(*vp)); - if (!vp) { - warn_noalloc(); - return; - } - vp_init_mmio(vp, mmio); - u8 status = VIRTIO_CONFIG_S_ACKNOWLEDGE | VIRTIO_CONFIG_S_DRIVER; - - if (vp_find_vq(vp, 2, &vq) < 0 ) { - dprintf(1, "fail to find vq for virtio-scsi-mmio %p\n", mmio); - goto fail; - } - - status |= VIRTIO_CONFIG_S_DRIVER_OK; - vp_set_status(vp, status); - - int i, tot; - for (tot = 0, i = 0; i < 256; i++) - tot += virtio_scsi_scan_target(NULL, mmio, vp, vq, i); - - if (!tot) - goto fail; - - return; - -fail: - vp_reset(vp); - free(vp); - free(vq); -} - -void -virtio_scsi_setup(void) -{ - u8 skip_nonbootable = is_bootprio_strict(); - - ASSERT32FLAT(); - if (! CONFIG_VIRTIO_SCSI) - return; - - dprintf(3, "init virtio-scsi\n"); - - struct pci_device *pci; - foreachpci(pci) { - if (pci->vendor != PCI_VENDOR_ID_REDHAT_QUMRANET || - (pci->device != PCI_DEVICE_ID_VIRTIO_SCSI_09 && - pci->device != PCI_DEVICE_ID_VIRTIO_SCSI_10)) - continue; - - if (skip_nonbootable && bootprio_find_pci_device(pci) < 0) { - dprintf(1, "skipping init of a non-bootable virtio-scsi at %pP\n", - pci); - continue; - } - - run_thread(init_virtio_scsi, pci); - } -} diff --git a/payloads/external/SeaBIOS/src/hw/virtio-scsi.h b/payloads/external/SeaBIOS/src/hw/virtio-scsi.h deleted file mode 100644 index 8f01de4c..00000000 --- a/payloads/external/SeaBIOS/src/hw/virtio-scsi.h +++ /dev/null @@ -1,48 +0,0 @@ -#ifndef _VIRTIO_SCSI_H -#define _VIRTIO_SCSI_H - -#define VIRTIO_SCSI_CDB_SIZE 32 -#define VIRTIO_SCSI_SENSE_SIZE 96 - -struct virtio_scsi_config -{ - u32 num_queues; - u32 seg_max; - u32 max_sectors; - u32 cmd_per_lun; - u32 event_info_size; - u32 sense_size; - u32 cdb_size; - u16 max_channel; - u16 max_target; - u32 max_lun; -} __attribute__((packed)); - -/* This is the first element of the "out" scatter-gather list. */ -struct virtio_scsi_req_cmd { - u8 lun[8]; - u64 id; - u8 task_attr; - u8 prio; - u8 crn; - char cdb[VIRTIO_SCSI_CDB_SIZE]; -} __attribute__((packed)); - -/* This is the first element of the "in" scatter-gather list. */ -struct virtio_scsi_resp_cmd { - u32 sense_len; - u32 residual; - u16 status_qualifier; - u8 status; - u8 response; - u8 sense[VIRTIO_SCSI_SENSE_SIZE]; -} __attribute__((packed)); - -#define VIRTIO_SCSI_S_OK 0 - -struct disk_op_s; -int virtio_scsi_process_op(struct disk_op_s *op); -void virtio_scsi_setup(void); -void init_virtio_scsi_mmio(void *data); - -#endif /* _VIRTIO_SCSI_H */ diff --git a/payloads/external/SeaBIOS/src/jpeg.c b/payloads/external/SeaBIOS/src/jpeg.c deleted file mode 100644 index c2138eda..00000000 --- a/payloads/external/SeaBIOS/src/jpeg.c +++ /dev/null @@ -1,1055 +0,0 @@ -/* - * Copyright (C) 2001, Novell Inc. - * Copyright (C) 2010 Kevin O'Connor <kevin@koconnor.net> - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * - * 3. Neither the name of Novell nor the names of the contributors may - * be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR - * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, - * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES - * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, - * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING - * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - */ - -/* - * a tiny jpeg decoder. - * - * written in August 2001 by Michael Schroeder <mls@suse.de> - * - */ - -#define __LITTLE_ENDIAN -#include "malloc.h" -#include "string.h" -#include "util.h" -#define ISHIFT 11 - -#define IFIX(a) ((int)((a) * (1 << ISHIFT) + .5)) -#define IMULT(a, b) (((a) * (b)) >> ISHIFT) -#define ITOINT(a) ((a) >> ISHIFT) - -#ifndef __P -# define __P(x) x -#endif - -/* special markers */ -#define M_BADHUFF -1 -#define M_EOF 0x80 - -struct in { - unsigned char *p; - unsigned int bits; - int left; - int marker; - - int (*func) __P((void *)); - void *data; -}; - -/*********************************/ -struct dec_hufftbl; -struct enc_hufftbl; - -union hufftblp { - struct dec_hufftbl *dhuff; - struct enc_hufftbl *ehuff; -}; - -struct scan { - int dc; /* old dc value */ - - union hufftblp hudc; - union hufftblp huac; - int next; /* when to switch to next scan */ - - int cid; /* component id */ - int hv; /* horiz/vert, copied from comp */ - int tq; /* quant tbl, copied from comp */ -}; - -/*********************************/ - -#define DECBITS 10 /* seems to be the optimum */ - -struct dec_hufftbl { - int maxcode[17]; - int valptr[16]; - unsigned char vals[256]; - unsigned int llvals[1 << DECBITS]; -}; - -static void decode_mcus __P((struct in *, int *, int, struct scan *, int *)); -static int dec_readmarker __P((struct in *)); -static void dec_makehuff __P((struct dec_hufftbl *, int *, unsigned char *)); - -static void setinput __P((struct in *, unsigned char *)); -/*********************************/ - -#undef PREC -#define PREC int - -static void idctqtab __P((unsigned char *, PREC *)); -static void idct __P((int *, int *, PREC *, PREC, int)); -static void scaleidctqtab __P((PREC *, PREC)); - -/*********************************/ - -static void initcol __P((PREC[][64])); - -static void col221111 __P((int *, unsigned char *, int)); -static void col221111_16 __P((int *, unsigned char *, int)); -static void col221111_32 __P((int *, unsigned char *, int)); - -/*********************************/ - -#define ERR_NO_SOI 1 -#define ERR_NOT_8BIT 2 -#define ERR_HEIGHT_MISMATCH 3 -#define ERR_WIDTH_MISMATCH 4 -#define ERR_BAD_WIDTH_OR_HEIGHT 5 -#define ERR_TOO_MANY_COMPPS 6 -#define ERR_ILLEGAL_HV 7 -#define ERR_QUANT_TABLE_SELECTOR 8 -#define ERR_NOT_YCBCR_221111 9 -#define ERR_UNKNOWN_CID_IN_SCAN 10 -#define ERR_NOT_SEQUENTIAL_DCT 11 -#define ERR_WRONG_MARKER 12 -#define ERR_NO_EOI 13 -#define ERR_BAD_TABLES 14 -#define ERR_DEPTH_MISMATCH 15 - -/*********************************/ - -#define M_SOI 0xd8 -#define M_APP0 0xe0 -#define M_DQT 0xdb -#define M_SOF0 0xc0 -#define M_DHT 0xc4 -#define M_DRI 0xdd -#define M_SOS 0xda -#define M_RST0 0xd0 -#define M_EOI 0xd9 -#define M_COM 0xfe - -struct comp { - int cid; - int hv; - int tq; -}; - -#define MAXCOMP 4 -struct jpginfo { - int nc; /* number of components */ - int ns; /* number of scans */ - int dri; /* restart interval */ - int nm; /* mcus til next marker */ - int rm; /* next restart marker */ -}; - -struct jpeg_decdata { - int dcts[6 * 64 + 16]; - int out[64 * 6]; - int dquant[3][64]; - - unsigned char *datap; - struct jpginfo info; - struct comp comps[MAXCOMP]; - struct scan dscans[MAXCOMP]; - unsigned char quant[4][64]; - struct dec_hufftbl dhuff[4]; - struct in in; - - int height, width; -}; - -static int getbyte(struct jpeg_decdata *jpeg) -{ - return *jpeg->datap++; -} - -static int getword(struct jpeg_decdata *jpeg) -{ - int c1, c2; - c1 = *jpeg->datap++; - c2 = *jpeg->datap++; - return c1 << 8 | c2; -} - -static int readtables(struct jpeg_decdata *jpeg, int till) -{ - int m, l, i, j, lq, pq, tq; - int tc, th, tt; - - for (;;) { - if (getbyte(jpeg) != 0xff) - return -1; - if ((m = getbyte(jpeg)) == till) - break; - - switch (m) { - case 0xc2: - return 0; - - case M_DQT: - lq = getword(jpeg); - while (lq > 2) { - pq = getbyte(jpeg); - tq = pq & 15; - if (tq > 3) - return -1; - pq >>= 4; - if (pq != 0) - return -1; - for (i = 0; i < 64; i++) - jpeg->quant[tq][i] = getbyte(jpeg); - lq -= 64 + 1; - } - break; - - case M_DHT: - l = getword(jpeg); - while (l > 2) { - int hufflen[16], k; - unsigned char huffvals[256]; - - tc = getbyte(jpeg); - th = tc & 15; - tc >>= 4; - tt = tc * 2 + th; - if (tc > 1 || th > 1) - return -1; - for (i = 0; i < 16; i++) - hufflen[i] = getbyte(jpeg); - l -= 1 + 16; - k = 0; - for (i = 0; i < 16; i++) { - for (j = 0; j < hufflen[i]; j++) - huffvals[k++] = getbyte(jpeg); - l -= hufflen[i]; - } - dec_makehuff(jpeg->dhuff + tt, hufflen, huffvals); - } - break; - - case M_DRI: - l = getword(jpeg); - jpeg->info.dri = getword(jpeg); - break; - - default: - l = getword(jpeg); - while (l-- > 2) - getbyte(jpeg); - break; - } - } - return 0; -} - -static void dec_initscans(struct jpeg_decdata *jpeg) -{ - int i; - - jpeg->info.nm = jpeg->info.dri + 1; - jpeg->info.rm = M_RST0; - for (i = 0; i < jpeg->info.ns; i++) - jpeg->dscans[i].dc = 0; -} - -static int dec_checkmarker(struct jpeg_decdata *jpeg) -{ - int i; - - if (dec_readmarker(&jpeg->in) != jpeg->info.rm) - return -1; - jpeg->info.nm = jpeg->info.dri; - jpeg->info.rm = (jpeg->info.rm + 1) & ~0x08; - for (i = 0; i < jpeg->info.ns; i++) - jpeg->dscans[i].dc = 0; - return 0; -} - -struct jpeg_decdata *jpeg_alloc(void) -{ - struct jpeg_decdata *jpeg = malloc_tmphigh(sizeof(*jpeg)); - return jpeg; -} - -int jpeg_decode(struct jpeg_decdata *jpeg, unsigned char *buf) -{ - int i, j, m, tac, tdc; - - if (!jpeg || !buf) - return -1; - jpeg->datap = buf; - if (getbyte(jpeg) != 0xff) - return ERR_NO_SOI; - if (getbyte(jpeg) != M_SOI) - return ERR_NO_SOI; - if (readtables(jpeg, M_SOF0)) - return ERR_BAD_TABLES; - getword(jpeg); - i = getbyte(jpeg); - if (i != 8) - return ERR_NOT_8BIT; - jpeg->height = getword(jpeg); - jpeg->width = getword(jpeg); - if ((jpeg->height & 15) || (jpeg->width & 15)) - return ERR_BAD_WIDTH_OR_HEIGHT; - jpeg->info.nc = getbyte(jpeg); - if (jpeg->info.nc > MAXCOMP) - return ERR_TOO_MANY_COMPPS; - for (i = 0; i < jpeg->info.nc; i++) { - int h, v; - jpeg->comps[i].cid = getbyte(jpeg); - jpeg->comps[i].hv = getbyte(jpeg); - v = jpeg->comps[i].hv & 15; - h = jpeg->comps[i].hv >> 4; - jpeg->comps[i].tq = getbyte(jpeg); - if (h > 3 || v > 3) - return ERR_ILLEGAL_HV; - if (jpeg->comps[i].tq > 3) - return ERR_QUANT_TABLE_SELECTOR; - } - if (readtables(jpeg, M_SOS)) - return ERR_BAD_TABLES; - getword(jpeg); - jpeg->info.ns = getbyte(jpeg); - if (jpeg->info.ns != 3) - return ERR_NOT_YCBCR_221111; - for (i = 0; i < 3; i++) { - jpeg->dscans[i].cid = getbyte(jpeg); - tdc = getbyte(jpeg); - tac = tdc & 15; - tdc >>= 4; - if (tdc > 1 || tac > 1) - return ERR_QUANT_TABLE_SELECTOR; - for (j = 0; j < jpeg->info.nc; j++) - if (jpeg->comps[j].cid == jpeg->dscans[i].cid) - break; - if (j == jpeg->info.nc) - return ERR_UNKNOWN_CID_IN_SCAN; - jpeg->dscans[i].hv = jpeg->comps[j].hv; - jpeg->dscans[i].tq = jpeg->comps[j].tq; - jpeg->dscans[i].hudc.dhuff = &jpeg->dhuff[tdc]; - jpeg->dscans[i].huac.dhuff = &jpeg->dhuff[2 + tac]; - } - - i = getbyte(jpeg); - j = getbyte(jpeg); - m = getbyte(jpeg); - - if (i != 0 || j != 63 || m != 0) - return ERR_NOT_SEQUENTIAL_DCT; - - if (jpeg->dscans[0].cid != 1 || jpeg->dscans[1].cid != 2 - || jpeg->dscans[2].cid != 3) - return ERR_NOT_YCBCR_221111; - - if (jpeg->dscans[0].hv != 0x22 || jpeg->dscans[1].hv != 0x11 - || jpeg->dscans[2].hv != 0x11) - return ERR_NOT_YCBCR_221111; - - idctqtab(jpeg->quant[jpeg->dscans[0].tq], jpeg->dquant[0]); - idctqtab(jpeg->quant[jpeg->dscans[1].tq], jpeg->dquant[1]); - idctqtab(jpeg->quant[jpeg->dscans[2].tq], jpeg->dquant[2]); - initcol(jpeg->dquant); - setinput(&jpeg->in, jpeg->datap); - -#if 0 - /* landing zone */ - img[len] = 0; - img[len + 1] = 0xff; - img[len + 2] = M_EOF; -#endif - - dec_initscans(jpeg); - - return 0; -} - -void jpeg_get_size(struct jpeg_decdata *jpeg, int *width, int *height) -{ - *width = jpeg->width; - *height = jpeg->height; -} - -int jpeg_show(struct jpeg_decdata *jpeg, unsigned char *pic, int width - , int height, int depth, int bytes_per_line_dest) -{ - int m, mcusx, mcusy, mx, my, mloffset, jpgbpl; - int max[6]; - - if (jpeg->height != height) - return ERR_HEIGHT_MISMATCH; - if (jpeg->width != width) - return ERR_WIDTH_MISMATCH; - - jpgbpl = width * depth / 8; - mloffset = bytes_per_line_dest > jpgbpl ? bytes_per_line_dest : jpgbpl; - - mcusx = jpeg->width >> 4; - mcusy = jpeg->height >> 4; - - jpeg->dscans[0].next = 6 - 4; - jpeg->dscans[1].next = 6 - 4 - 1; - jpeg->dscans[2].next = 6 - 4 - 1 - 1; /* 411 encoding */ - for (my = 0; my < mcusy; my++) { - for (mx = 0; mx < mcusx; mx++) { - if (jpeg->info.dri && !--jpeg->info.nm) - if (dec_checkmarker(jpeg)) - return ERR_WRONG_MARKER; - - decode_mcus(&jpeg->in, jpeg->dcts, 6, jpeg->dscans, max); - idct(jpeg->dcts, jpeg->out, jpeg->dquant[0], - IFIX(128.5), max[0]); - idct(jpeg->dcts + 64, jpeg->out + 64, jpeg->dquant[0], - IFIX(128.5), max[1]); - idct(jpeg->dcts + 128, jpeg->out + 128, jpeg->dquant[0], - IFIX(128.5), max[2]); - idct(jpeg->dcts + 192, jpeg->out + 192, jpeg->dquant[0], - IFIX(128.5), max[3]); - idct(jpeg->dcts + 256, jpeg->out + 256, jpeg->dquant[1], - IFIX(0.5), max[4]); - idct(jpeg->dcts + 320, jpeg->out + 320, jpeg->dquant[2], - IFIX(0.5), max[5]); - - switch (depth) { - case 32: - col221111_32(jpeg->out, - pic + (my * 16 * mloffset + mx * 16 * 4), - mloffset); - break; - case 24: - col221111(jpeg->out, - pic + (my * 16 * mloffset + mx * 16 * 3), - mloffset); - break; - case 16: - col221111_16(jpeg->out, - pic + (my * 16 * mloffset + mx * 16 * 2), - mloffset); - break; - default: - return ERR_DEPTH_MISMATCH; - break; - } - } - } - - m = dec_readmarker(&jpeg->in); - if (m != M_EOI) - return ERR_NO_EOI; - - return 0; -} - -/****************************************************************/ -/************** huffman decoder ***************/ -/****************************************************************/ - -static int fillbits __P((struct in *, int, unsigned int)); -static int dec_rec2 __P((struct in *, struct dec_hufftbl *, int *, int, int)); - -static void setinput(struct in *in, unsigned char *p) -{ - in->p = p; - in->left = 0; - in->bits = 0; - in->marker = 0; -} - -static int fillbits(struct in *in, int le, unsigned int bi) -{ - int b, m; - - if (in->marker) { - if (le <= 16) - in->bits = bi << 16, le += 16; - return le; - } - while (le <= 24) { - b = *in->p++; - if (b == 0xff && (m = *in->p++) != 0) { - if (m == M_EOF) { - if (in->func && (m = in->func(in->data)) == 0) - continue; - } - in->marker = m; - if (le <= 16) - bi = bi << 16, le += 16; - break; - } - bi = bi << 8 | b; - le += 8; - } - in->bits = bi; /* tmp... 2 return values needed */ - return le; -} - -static int dec_readmarker(struct in *in) -{ - int m; - - in->left = fillbits(in, in->left, in->bits); - if ((m = in->marker) == 0) - return 0; - in->left = 0; - in->marker = 0; - return m; -} - -#define LEBI_DCL int le, bi -#define LEBI_GET(in) (le = in->left, bi = in->bits) -#define LEBI_PUT(in) (in->left = le, in->bits = bi) - -#define GETBITS(in, n) ( \ - (le < (n) ? le = fillbits(in, le, bi), bi = in->bits : 0), \ - (le -= (n)), \ - bi >> le & ((1 << (n)) - 1) \ -) - -#define UNGETBITS(in, n) ( \ - le += (n) \ -) - - -static int dec_rec2(struct in *in, struct dec_hufftbl *hu, int *runp, - int c, int i) -{ - LEBI_DCL; - - LEBI_GET(in); - if (i) { - UNGETBITS(in, i & 127); - *runp = i >> 8 & 15; - i >>= 16; - } else { - for (i = DECBITS; - (c = ((c << 1) | GETBITS(in, 1))) >= (hu->maxcode[i]); i++); - if (i >= 16) { - in->marker = M_BADHUFF; - return 0; - } - i = hu->vals[hu->valptr[i] + c - hu->maxcode[i - 1] * 2]; - *runp = i >> 4; - i &= 15; - } - if (i == 0) { /* sigh, 0xf0 is 11 bit */ - LEBI_PUT(in); - return 0; - } - /* receive part */ - c = GETBITS(in, i); - if (c < (1 << (i - 1))) - c += (-1 << i) + 1; - LEBI_PUT(in); - return c; -} - -#define DEC_REC(in, hu, r, i) ( \ - r = GETBITS(in, DECBITS), \ - i = hu->llvals[r], \ - i & 128 ? \ - ( \ - UNGETBITS(in, i & 127), \ - r = i >> 8 & 15, \ - i >> 16 \ - ) \ - : \ - ( \ - LEBI_PUT(in), \ - i = dec_rec2(in, hu, &r, r, i), \ - LEBI_GET(in), \ - i \ - ) \ -) - -static void decode_mcus(struct in *in, int *dct, int n, struct scan *sc, - int *maxp) -{ - struct dec_hufftbl *hu; - int i, r, t; - LEBI_DCL; - - memset(dct, 0, n * 64 * sizeof(*dct)); - LEBI_GET(in); - while (n-- > 0) { - hu = sc->hudc.dhuff; - *dct++ = (sc->dc += DEC_REC(in, hu, r, t)); - - hu = sc->huac.dhuff; - i = 63; - while (i > 0) { - t = DEC_REC(in, hu, r, t); - if (t == 0 && r == 0) { - dct += i; - break; - } - dct += r; - *dct++ = t; - i -= r + 1; - } - *maxp++ = 64 - i; - if (n == sc->next) - sc++; - } - LEBI_PUT(in); -} - -static void dec_makehuff(struct dec_hufftbl *hu, int *hufflen, - unsigned char *huffvals) -{ - int code, k, i, j, d, x, c, v; - for (i = 0; i < (1 << DECBITS); i++) - hu->llvals[i] = 0; - - /* - * llvals layout: - * - * value v already known, run r, backup u bits: - * vvvvvvvvvvvvvvvv 0000 rrrr 1 uuuuuuu - * value unknown, size b bits, run r, backup u bits: - * 000000000000bbbb 0000 rrrr 0 uuuuuuu - * value and size unknown: - * 0000000000000000 0000 0000 0 0000000 - */ - - code = 0; - k = 0; - for (i = 0; i < 16; i++, code <<= 1) { /* sizes */ - hu->valptr[i] = k; - for (j = 0; j < hufflen[i]; j++) { - hu->vals[k] = *huffvals++; - if (i < DECBITS) { - c = code << (DECBITS - 1 - i); - v = hu->vals[k] & 0x0f; /* size */ - for (d = 1 << (DECBITS - 1 - i); --d >= 0;) { - if (v + i < DECBITS) { /* both fit in table */ - x = d >> (DECBITS - 1 - v - i); - if (v && x < (1 << (v - 1))) - x += (-1 << v) + 1; - x = x << 16 | (hu->vals[k] & 0xf0) << 4 | - (DECBITS - (i + 1 + v)) | 128; - } else - x = v << 16 | (hu->vals[k] & 0xf0) << 4 | - (DECBITS - (i + 1)); - hu->llvals[c | d] = x; - } - } - code++; - k++; - } - hu->maxcode[i] = code; - } - hu->maxcode[16] = 0x20000; /* always terminate decode */ -} - -/****************************************************************/ -/************** idct ***************/ -/****************************************************************/ - -#define ONE ((PREC)IFIX(1.)) -#define S2 ((PREC)IFIX(0.382683432)) -#define C2 ((PREC)IFIX(0.923879532)) -#define C4 ((PREC)IFIX(0.707106781)) - -#define S22 ((PREC)IFIX(2 * 0.382683432)) -#define C22 ((PREC)IFIX(2 * 0.923879532)) -#define IC4 ((PREC)IFIX(1 / 0.707106781)) - -#define C3IC1 ((PREC)IFIX(0.847759065)) /* c3/c1 */ -#define C5IC1 ((PREC)IFIX(0.566454497)) /* c5/c1 */ -#define C7IC1 ((PREC)IFIX(0.198912367)) /* c7/c1 */ - -#define XPP(a,b) (t = a + b, b = a - b, a = t) -#define XMP(a,b) (t = a - b, b = a + b, a = t) -#define XPM(a,b) (t = a + b, b = b - a, a = t) - -#define ROT(a,b,s,c) ( t = IMULT(a + b, s), \ - a = IMULT(a, c - s) + t, \ - b = IMULT(b, c + s) - t) - -#define IDCT \ -( \ - XPP(t0, t1), \ - XMP(t2, t3), \ - t2 = IMULT(t2, IC4) - t3, \ - XPP(t0, t3), \ - XPP(t1, t2), \ - XMP(t4, t7), \ - XPP(t5, t6), \ - XMP(t5, t7), \ - t5 = IMULT(t5, IC4), \ - ROT(t4, t6, S22, C22), \ - t6 -= t7, \ - t5 -= t6, \ - t4 -= t5, \ - XPP(t0, t7), \ - XPP(t1, t6), \ - XPP(t2, t5), \ - XPP(t3, t4) \ -) - -static unsigned char zig2[64] = { - 0, 2, 3, 9, 10, 20, 21, 35, - 14, 16, 25, 31, 39, 46, 50, 57, - 5, 7, 12, 18, 23, 33, 37, 48, - 27, 29, 41, 44, 52, 55, 59, 62, - 15, 26, 30, 40, 45, 51, 56, 58, - 1, 4, 8, 11, 19, 22, 34, 36, - 28, 42, 43, 53, 54, 60, 61, 63, - 6, 13, 17, 24, 32, 38, 47, 49 -}; - -static void idct(int *in, int *out, PREC * quant, PREC off, int max) -{ - PREC t0, t1, t2, t3, t4, t5, t6, t7, t; - PREC tmp[64], *tmpp; - int i, j; - unsigned char *zig2p; - - t0 = off; - if (max == 1) { - t0 += in[0] * quant[0]; - for (i = 0; i < 64; i++) - out[i] = ITOINT(t0); - return; - } - zig2p = zig2; - tmpp = tmp; - for (i = 0; i < 8; i++) { - j = *zig2p++; - t0 += in[j] * quant[j]; - j = *zig2p++; - t5 = in[j] * quant[j]; - j = *zig2p++; - t2 = in[j] * quant[j]; - j = *zig2p++; - t7 = in[j] * quant[j]; - j = *zig2p++; - t1 = in[j] * quant[j]; - j = *zig2p++; - t4 = in[j] * quant[j]; - j = *zig2p++; - t3 = in[j] * quant[j]; - j = *zig2p++; - t6 = in[j] * quant[j]; - IDCT; - tmpp[0 * 8] = t0; - tmpp[1 * 8] = t1; - tmpp[2 * 8] = t2; - tmpp[3 * 8] = t3; - tmpp[4 * 8] = t4; - tmpp[5 * 8] = t5; - tmpp[6 * 8] = t6; - tmpp[7 * 8] = t7; - tmpp++; - t0 = 0; - } - for (i = 0; i < 8; i++) { - t0 = tmp[8 * i + 0]; - t1 = tmp[8 * i + 1]; - t2 = tmp[8 * i + 2]; - t3 = tmp[8 * i + 3]; - t4 = tmp[8 * i + 4]; - t5 = tmp[8 * i + 5]; - t6 = tmp[8 * i + 6]; - t7 = tmp[8 * i + 7]; - IDCT; - out[8 * i + 0] = ITOINT(t0); - out[8 * i + 1] = ITOINT(t1); - out[8 * i + 2] = ITOINT(t2); - out[8 * i + 3] = ITOINT(t3); - out[8 * i + 4] = ITOINT(t4); - out[8 * i + 5] = ITOINT(t5); - out[8 * i + 6] = ITOINT(t6); - out[8 * i + 7] = ITOINT(t7); - } -} - -static unsigned char zig[64] = { - 0, 1, 5, 6, 14, 15, 27, 28, - 2, 4, 7, 13, 16, 26, 29, 42, - 3, 8, 12, 17, 25, 30, 41, 43, - 9, 11, 18, 24, 31, 40, 44, 53, - 10, 19, 23, 32, 39, 45, 52, 54, - 20, 22, 33, 38, 46, 51, 55, 60, - 21, 34, 37, 47, 50, 56, 59, 61, - 35, 36, 48, 49, 57, 58, 62, 63 -}; - -static PREC aaidct[8] = { - IFIX(0.3535533906), IFIX(0.4903926402), - IFIX(0.4619397663), IFIX(0.4157348062), - IFIX(0.3535533906), IFIX(0.2777851165), - IFIX(0.1913417162), IFIX(0.0975451610) -}; - - -static void idctqtab(unsigned char *qin, PREC * qout) -{ - int i, j; - - for (i = 0; i < 8; i++) - for (j = 0; j < 8; j++) - qout[zig[i * 8 + j]] = qin[zig[i * 8 + j]] * - IMULT(aaidct[i], aaidct[j]); -} - -static void scaleidctqtab(PREC * q, PREC sc) -{ - int i; - - for (i = 0; i < 64; i++) - q[i] = IMULT(q[i], sc); -} - -/****************************************************************/ -/************** color decoder ***************/ -/****************************************************************/ - -#define ROUND - -/* - * YCbCr Color transformation: - * - * y:0..255 Cb:-128..127 Cr:-128..127 - * - * R = Y + 1.40200 * Cr - * G = Y - 0.34414 * Cb - 0.71414 * Cr - * B = Y + 1.77200 * Cb - * - * => - * Cr *= 1.40200; - * Cb *= 1.77200; - * Cg = 0.19421 * Cb + .50937 * Cr; - * R = Y + Cr; - * G = Y - Cg; - * B = Y + Cb; - * - * => - * Cg = (50 * Cb + 130 * Cr + 128) >> 8; - */ - -static void initcol(PREC q[][64]) -{ - scaleidctqtab(q[1], IFIX(1.77200)); - scaleidctqtab(q[2], IFIX(1.40200)); -} - -/* This is optimized for the stupid sun SUNWspro compiler. */ -#define STORECLAMP(a,x) \ -( \ - (a) = (x), \ - (unsigned int)(x) >= 256 ? \ - ((a) = (x) < 0 ? 0 : 255) \ - : \ - 0 \ -) - -#define CLAMP(x) ((unsigned int)(x) >= 256 ? ((x) < 0 ? 0 : 255) : (x)) - -#ifdef ROUND - -#define CBCRCG(yin, xin) \ -( \ - cb = outc[0 +yin*8+xin], \ - cr = outc[64+yin*8+xin], \ - cg = (50 * cb + 130 * cr + 128) >> 8 \ -) - -#else - -#define CBCRCG(yin, xin) \ -( \ - cb = outc[0 +yin*8+xin], \ - cr = outc[64+yin*8+xin], \ - cg = (3 * cb + 8 * cr) >> 4 \ -) - -#endif - -#ifdef __LITTLE_ENDIAN -#define PIC(yin, xin, p, xout) \ -( \ - y = outy[(yin) * 8 + xin], \ - STORECLAMP(p[(xout) * 3 + 2], y + cr), \ - STORECLAMP(p[(xout) * 3 + 1], y - cg), \ - STORECLAMP(p[(xout) * 3 + 0], y + cb) \ -) -#else -#define PIC(yin, xin, p, xout) \ -( \ - y = outy[(yin) * 8 + xin], \ - STORECLAMP(p[(xout) * 3 + 0], y + cr), \ - STORECLAMP(p[(xout) * 3 + 1], y - cg), \ - STORECLAMP(p[(xout) * 3 + 2], y + cb) \ -) -#endif - -#ifdef __LITTLE_ENDIAN -#define PIC_16(yin, xin, p, xout, add) \ -( \ - y = outy[(yin) * 8 + xin], \ - y = ((CLAMP(y + cr + add*2+1) & 0xf8) << 8) | \ - ((CLAMP(y - cg + add ) & 0xfc) << 3) | \ - ((CLAMP(y + cb + add*2+1) ) >> 3), \ - p[(xout) * 2 + 0] = y & 0xff, \ - p[(xout) * 2 + 1] = y >> 8 \ -) -#else -#ifdef CONFIG_PPC -#define PIC_16(yin, xin, p, xout, add) \ -( \ - y = outy[(yin) * 8 + xin], \ - y = ((CLAMP(y + cr + add*2+1) & 0xf8) << 7) | \ - ((CLAMP(y - cg + add*2+1) & 0xf8) << 2) | \ - ((CLAMP(y + cb + add*2+1) ) >> 3), \ - p[(xout) * 2 + 0] = y >> 8, \ - p[(xout) * 2 + 1] = y & 0xff \ -) -#else -#define PIC_16(yin, xin, p, xout, add) \ -( \ - y = outy[(yin) * 8 + xin], \ - y = ((CLAMP(y + cr + add*2+1) & 0xf8) << 8) | \ - ((CLAMP(y - cg + add ) & 0xfc) << 3) | \ - ((CLAMP(y + cb + add*2+1) ) >> 3), \ - p[(xout) * 2 + 0] = y >> 8, \ - p[(xout) * 2 + 1] = y & 0xff \ -) -#endif -#endif - -#define PIC_32(yin, xin, p, xout) \ -( \ - y = outy[(yin) * 8 + xin], \ - STORECLAMP(p[(xout) * 4 + 0], y + cr), \ - STORECLAMP(p[(xout) * 4 + 1], y - cg), \ - STORECLAMP(p[(xout) * 4 + 2], y + cb), \ - p[(xout) * 4 + 3] = 0 \ -) - -#define PIC221111(xin) \ -( \ - CBCRCG(0, xin), \ - PIC(xin / 4 * 8 + 0, (xin & 3) * 2 + 0, pic0, xin * 2 + 0), \ - PIC(xin / 4 * 8 + 0, (xin & 3) * 2 + 1, pic0, xin * 2 + 1), \ - PIC(xin / 4 * 8 + 1, (xin & 3) * 2 + 0, pic1, xin * 2 + 0), \ - PIC(xin / 4 * 8 + 1, (xin & 3) * 2 + 1, pic1, xin * 2 + 1) \ -) - -#define PIC221111_16(xin) \ -( \ - CBCRCG(0, xin), \ - PIC_16(xin / 4 * 8 + 0, (xin & 3) * 2 + 0, pic0, xin * 2 + 0, 3), \ - PIC_16(xin / 4 * 8 + 0, (xin & 3) * 2 + 1, pic0, xin * 2 + 1, 0), \ - PIC_16(xin / 4 * 8 + 1, (xin & 3) * 2 + 0, pic1, xin * 2 + 0, 1), \ - PIC_16(xin / 4 * 8 + 1, (xin & 3) * 2 + 1, pic1, xin * 2 + 1, 2) \ -) - -#define PIC221111_32(xin) \ -( \ - CBCRCG(0, xin), \ - PIC_32(xin / 4 * 8 + 0, (xin & 3) * 2 + 0, pic0, xin * 2 + 0), \ - PIC_32(xin / 4 * 8 + 0, (xin & 3) * 2 + 1, pic0, xin * 2 + 1), \ - PIC_32(xin / 4 * 8 + 1, (xin & 3) * 2 + 0, pic1, xin * 2 + 0), \ - PIC_32(xin / 4 * 8 + 1, (xin & 3) * 2 + 1, pic1, xin * 2 + 1) \ -) - -static void col221111(int *out, unsigned char *pic, int width) -{ - int i, j, k; - unsigned char *pic0, *pic1; - int *outy, *outc; - int cr, cg, cb, y; - - pic0 = pic; - pic1 = pic + width; - outy = out; - outc = out + 64 * 4; - for (i = 2; i > 0; i--) { - for (j = 4; j > 0; j--) { - for (k = 0; k < 8; k++) { - PIC221111(k); - } - outc += 8; - outy += 16; - pic0 += 2 * width; - pic1 += 2 * width; - } - outy += 64 * 2 - 16 * 4; - } -} - -static void col221111_16(int *out, unsigned char *pic, int width) -{ - int i, j, k; - unsigned char *pic0, *pic1; - int *outy, *outc; - int cr, cg, cb, y; - - pic0 = pic; - pic1 = pic + width; - outy = out; - outc = out + 64 * 4; - for (i = 2; i > 0; i--) { - for (j = 4; j > 0; j--) { - for (k = 0; k < 8; k++) { - PIC221111_16(k); - } - outc += 8; - outy += 16; - pic0 += 2 * width; - pic1 += 2 * width; - } - outy += 64 * 2 - 16 * 4; - } -} - -static void col221111_32(int *out, unsigned char *pic, int width) -{ - int i, j, k; - unsigned char *pic0, *pic1; - int *outy, *outc; - int cr, cg, cb, y; - - pic0 = pic; - pic1 = pic + width; - outy = out; - outc = out + 64 * 4; - for (i = 2; i > 0; i--) { - for (j = 4; j > 0; j--) { - for (k = 0; k < 8; k++) { - PIC221111_32(k); - } - outc += 8; - outy += 16; - pic0 += 2 * width; - pic1 += 2 * width; - } - outy += 64 * 2 - 16 * 4; - } -} diff --git a/payloads/external/SeaBIOS/src/kbd.c b/payloads/external/SeaBIOS/src/kbd.c deleted file mode 100644 index 15e5ae78..00000000 --- a/payloads/external/SeaBIOS/src/kbd.c +++ /dev/null @@ -1,599 +0,0 @@ -// 16bit code to handle keyboard requests. -// -// Copyright (C) 2008 Kevin O'Connor <kevin@koconnor.net> -// Copyright (C) 2002 MandrakeSoft S.A. -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "biosvar.h" // GET_BDA -#include "bregs.h" // struct bregs -#include "config.h" // CONFIG_* -#include "hw/ps2port.h" // ps2_kbd_command -#include "hw/usb-hid.h" // usb_kbd_command -#include "output.h" // debug_enter -#include "stacks.h" // yield -#include "string.h" // memset -#include "util.h" // kbd_init - -void -kbd_init(void) -{ - dprintf(3, "init keyboard\n"); - u16 x = offsetof(struct bios_data_area_s, kbd_buf); - SET_BDA(kbd_flag1, KF1_101KBD); - SET_BDA(kbd_buf_head, x); - SET_BDA(kbd_buf_tail, x); - SET_BDA(kbd_buf_start_offset, x); - - SET_BDA(kbd_buf_end_offset - , x + FIELD_SIZEOF(struct bios_data_area_s, kbd_buf)); -} - -u8 -enqueue_key(u16 keycode) -{ - u16 buffer_start = GET_BDA(kbd_buf_start_offset); - u16 buffer_end = GET_BDA(kbd_buf_end_offset); - - u16 buffer_head = GET_BDA(kbd_buf_head); - u16 buffer_tail = GET_BDA(kbd_buf_tail); - - u16 temp_tail = buffer_tail; - buffer_tail += 2; - if (buffer_tail >= buffer_end) - buffer_tail = buffer_start; - - if (buffer_tail == buffer_head) - return 0; - - SET_FARVAR(SEG_BDA, *(u16*)(temp_tail+0), keycode); - SET_BDA(kbd_buf_tail, buffer_tail); - return 1; -} - -static void -dequeue_key(struct bregs *regs, int incr, int extended) -{ - yield(); - u16 buffer_head; - u16 buffer_tail; - for (;;) { - buffer_head = GET_BDA(kbd_buf_head); - buffer_tail = GET_BDA(kbd_buf_tail); - - if (buffer_head != buffer_tail) - break; - if (!incr) { - regs->flags |= F_ZF; - return; - } - yield_toirq(); - } - - u16 keycode = GET_FARVAR(SEG_BDA, *(u16*)(buffer_head+0)); - u8 ascii = keycode & 0xff; - if (!extended) { - // Translate extended keys - if (ascii == 0xe0 && keycode & 0xff00) - keycode &= 0xff00; - else if (keycode == 0xe00d || keycode == 0xe00a) - // Extended enter key - keycode = 0x1c00 | ascii; - else if (keycode == 0xe02f) - // Extended '/' key - keycode = 0x352f; - // Technically, if the ascii value is 0xf0 or if the - // 'scancode' is greater than 0x84 then the key should be - // discarded. However, there seems no harm in passing on the - // extended values in these cases. - } - if (ascii == 0xf0 && keycode & 0xff00) - keycode &= 0xff00; - regs->ax = keycode; - - if (!incr) { - regs->flags &= ~F_ZF; - return; - } - u16 buffer_start = GET_BDA(kbd_buf_start_offset); - u16 buffer_end = GET_BDA(kbd_buf_end_offset); - - buffer_head += 2; - if (buffer_head >= buffer_end) - buffer_head = buffer_start; - SET_BDA(kbd_buf_head, buffer_head); -} - -static int -kbd_command(int command, u8 *param) -{ - if (usb_kbd_active()) - return usb_kbd_command(command, param); - return ps2_kbd_command(command, param); -} - -// read keyboard input -static void -handle_1600(struct bregs *regs) -{ - dequeue_key(regs, 1, 0); -} - -// check keyboard status -static void -handle_1601(struct bregs *regs) -{ - dequeue_key(regs, 0, 0); -} - -// get shift flag status -static void -handle_1602(struct bregs *regs) -{ - yield(); - regs->al = GET_BDA(kbd_flag0); -} - -// store key-stroke into buffer -static void -handle_1605(struct bregs *regs) -{ - regs->al = !enqueue_key(regs->cx); -} - -// GET KEYBOARD FUNCTIONALITY -static void -handle_1609(struct bregs *regs) -{ - // bit Bochs Description - // 7 0 reserved - // 6 0 INT 16/AH=20h-22h supported (122-key keyboard support) - // 5 1 INT 16/AH=10h-12h supported (enhanced keyboard support) - // 4 1 INT 16/AH=0Ah supported - // 3 0 INT 16/AX=0306h supported - // 2 0 INT 16/AX=0305h supported - // 1 0 INT 16/AX=0304h supported - // 0 0 INT 16/AX=0300h supported - // - regs->al = 0x30; -} - -// GET KEYBOARD ID -static void noinline -handle_160a(struct bregs *regs) -{ - u8 param[2]; - int ret = kbd_command(ATKBD_CMD_GETID, param); - if (ret) { - regs->bx = 0; - return; - } - regs->bx = (param[1] << 8) | param[0]; -} - -// read MF-II keyboard input -static void -handle_1610(struct bregs *regs) -{ - dequeue_key(regs, 1, 1); -} - -// check MF-II keyboard status -static void -handle_1611(struct bregs *regs) -{ - dequeue_key(regs, 0, 1); -} - -// get extended keyboard status -static void -handle_1612(struct bregs *regs) -{ - yield(); - regs->ax = ((GET_BDA(kbd_flag0) & ~((KF1_RCTRL|KF1_RALT) << 8)) - | ((GET_BDA(kbd_flag1) & (KF1_RCTRL|KF1_RALT)) << 8)); - //BX_DEBUG_INT16("int16: func 12 sending %04x\n",AX); -} - -static void -handle_166f(struct bregs *regs) -{ - if (regs->al == 0x08) - // unsupported, aka normal keyboard - regs->ah = 2; -} - -// keyboard capability check called by DOS 5.0+ keyb -static void -handle_1692(struct bregs *regs) -{ - // function int16 ah=0x10-0x12 supported - regs->ah = 0x80; -} - -// 122 keys capability check called by DOS 5.0+ keyb -static void -handle_16a2(struct bregs *regs) -{ - // don't change AH : function int16 ah=0x20-0x22 NOT supported -} - -static void -handle_16XX(struct bregs *regs) -{ - warn_unimplemented(regs); -} - -static void noinline -set_leds(void) -{ - u8 shift_flags = (GET_BDA(kbd_flag0) >> 4) & 0x07; - u8 kbd_led = GET_BDA(kbd_led); - u8 led_flags = kbd_led & 0x07; - if (shift_flags == led_flags) - return; - - int ret = kbd_command(ATKBD_CMD_SETLEDS, &shift_flags); - if (ret) - // Error - return; - kbd_led = (kbd_led & ~0x07) | shift_flags; - SET_BDA(kbd_led, kbd_led); -} - -// INT 16h Keyboard Service Entry Point -void VISIBLE16 -handle_16(struct bregs *regs) -{ - debug_enter(regs, DEBUG_HDL_16); - if (! CONFIG_KEYBOARD) - return; - - // XXX - set_leds should be called from irq handler - set_leds(); - - switch (regs->ah) { - case 0x00: handle_1600(regs); break; - case 0x01: handle_1601(regs); break; - case 0x02: handle_1602(regs); break; - case 0x05: handle_1605(regs); break; - case 0x09: handle_1609(regs); break; - case 0x0a: handle_160a(regs); break; - case 0x10: handle_1610(regs); break; - case 0x11: handle_1611(regs); break; - case 0x12: handle_1612(regs); break; - case 0x92: handle_1692(regs); break; - case 0xa2: handle_16a2(regs); break; - case 0x6f: handle_166f(regs); break; - default: handle_16XX(regs); break; - } -} - -#define none 0 - -static struct scaninfo { - u16 normal; - u16 shift; - u16 control; - u16 alt; -} scan_to_keycode[] VAR16 = { - { none, none, none, none }, - { 0x011b, 0x011b, 0x011b, 0x01f0 }, /* escape */ - { 0x0231, 0x0221, none, 0x7800 }, /* 1! */ - { 0x0332, 0x0340, 0x0300, 0x7900 }, /* 2@ */ - { 0x0433, 0x0423, none, 0x7a00 }, /* 3# */ - { 0x0534, 0x0524, none, 0x7b00 }, /* 4$ */ - { 0x0635, 0x0625, none, 0x7c00 }, /* 5% */ - { 0x0736, 0x075e, 0x071e, 0x7d00 }, /* 6^ */ - { 0x0837, 0x0826, none, 0x7e00 }, /* 7& */ - { 0x0938, 0x092a, none, 0x7f00 }, /* 8* */ - { 0x0a39, 0x0a28, none, 0x8000 }, /* 9( */ - { 0x0b30, 0x0b29, none, 0x8100 }, /* 0) */ - { 0x0c2d, 0x0c5f, 0x0c1f, 0x8200 }, /* -_ */ - { 0x0d3d, 0x0d2b, none, 0x8300 }, /* =+ */ - { 0x0e08, 0x0e08, 0x0e7f, 0x0ef0 }, /* backspace */ - { 0x0f09, 0x0f00, 0x9400, 0xa5f0 }, /* tab */ - { 0x1071, 0x1051, 0x1011, 0x1000 }, /* Q */ - { 0x1177, 0x1157, 0x1117, 0x1100 }, /* W */ - { 0x1265, 0x1245, 0x1205, 0x1200 }, /* E */ - { 0x1372, 0x1352, 0x1312, 0x1300 }, /* R */ - { 0x1474, 0x1454, 0x1414, 0x1400 }, /* T */ - { 0x1579, 0x1559, 0x1519, 0x1500 }, /* Y */ - { 0x1675, 0x1655, 0x1615, 0x1600 }, /* U */ - { 0x1769, 0x1749, 0x1709, 0x1700 }, /* I */ - { 0x186f, 0x184f, 0x180f, 0x1800 }, /* O */ - { 0x1970, 0x1950, 0x1910, 0x1900 }, /* P */ - { 0x1a5b, 0x1a7b, 0x1a1b, 0x1af0 }, /* [{ */ - { 0x1b5d, 0x1b7d, 0x1b1d, 0x1bf0 }, /* ]} */ - { 0x1c0d, 0x1c0d, 0x1c0a, 0x1cf0 }, /* Enter */ - { none, none, none, none }, /* L Ctrl */ - { 0x1e61, 0x1e41, 0x1e01, 0x1e00 }, /* A */ - { 0x1f73, 0x1f53, 0x1f13, 0x1f00 }, /* S */ - { 0x2064, 0x2044, 0x2004, 0x2000 }, /* D */ - { 0x2166, 0x2146, 0x2106, 0x2100 }, /* F */ - { 0x2267, 0x2247, 0x2207, 0x2200 }, /* G */ - { 0x2368, 0x2348, 0x2308, 0x2300 }, /* H */ - { 0x246a, 0x244a, 0x240a, 0x2400 }, /* J */ - { 0x256b, 0x254b, 0x250b, 0x2500 }, /* K */ - { 0x266c, 0x264c, 0x260c, 0x2600 }, /* L */ - { 0x273b, 0x273a, none, 0x27f0 }, /* ;: */ - { 0x2827, 0x2822, none, 0x28f0 }, /* '" */ - { 0x2960, 0x297e, none, 0x29f0 }, /* `~ */ - { none, none, none, none }, /* L shift */ - { 0x2b5c, 0x2b7c, 0x2b1c, 0x2bf0 }, /* |\ */ - { 0x2c7a, 0x2c5a, 0x2c1a, 0x2c00 }, /* Z */ - { 0x2d78, 0x2d58, 0x2d18, 0x2d00 }, /* X */ - { 0x2e63, 0x2e43, 0x2e03, 0x2e00 }, /* C */ - { 0x2f76, 0x2f56, 0x2f16, 0x2f00 }, /* V */ - { 0x3062, 0x3042, 0x3002, 0x3000 }, /* B */ - { 0x316e, 0x314e, 0x310e, 0x3100 }, /* N */ - { 0x326d, 0x324d, 0x320d, 0x3200 }, /* M */ - { 0x332c, 0x333c, none, 0x33f0 }, /* ,< */ - { 0x342e, 0x343e, none, 0x34f0 }, /* .> */ - { 0x352f, 0x353f, none, 0x35f0 }, /* /? */ - { none, none, none, none }, /* R Shift */ - { 0x372a, 0x372a, 0x9600, 0x37f0 }, /* * */ - { none, none, none, none }, /* L Alt */ - { 0x3920, 0x3920, 0x3920, 0x3920 }, /* space */ - { none, none, none, none }, /* caps lock */ - { 0x3b00, 0x5400, 0x5e00, 0x6800 }, /* F1 */ - { 0x3c00, 0x5500, 0x5f00, 0x6900 }, /* F2 */ - { 0x3d00, 0x5600, 0x6000, 0x6a00 }, /* F3 */ - { 0x3e00, 0x5700, 0x6100, 0x6b00 }, /* F4 */ - { 0x3f00, 0x5800, 0x6200, 0x6c00 }, /* F5 */ - { 0x4000, 0x5900, 0x6300, 0x6d00 }, /* F6 */ - { 0x4100, 0x5a00, 0x6400, 0x6e00 }, /* F7 */ - { 0x4200, 0x5b00, 0x6500, 0x6f00 }, /* F8 */ - { 0x4300, 0x5c00, 0x6600, 0x7000 }, /* F9 */ - { 0x4400, 0x5d00, 0x6700, 0x7100 }, /* F10 */ - { none, none, none, none }, /* Num Lock */ - { none, none, none, none }, /* Scroll Lock */ - { 0x4700, 0x4737, 0x7700, none }, /* 7 Home */ - { 0x4800, 0x4838, 0x8d00, none }, /* 8 UP */ - { 0x4900, 0x4939, 0x8400, none }, /* 9 PgUp */ - { 0x4a2d, 0x4a2d, 0x8e00, 0x4af0 }, /* - */ - { 0x4b00, 0x4b34, 0x7300, none }, /* 4 Left */ - { 0x4c00, 0x4c35, 0x8f00, none }, /* 5 */ - { 0x4d00, 0x4d36, 0x7400, none }, /* 6 Right */ - { 0x4e2b, 0x4e2b, 0x9000, 0x4ef0 }, /* + */ - { 0x4f00, 0x4f31, 0x7500, none }, /* 1 End */ - { 0x5000, 0x5032, 0x9100, none }, /* 2 Down */ - { 0x5100, 0x5133, 0x7600, none }, /* 3 PgDn */ - { 0x5200, 0x5230, 0x9200, none }, /* 0 Ins */ - { 0x5300, 0x532e, 0x9300, none }, /* Del */ - { none, none, none, none }, /* SysReq */ - { none, none, none, none }, - { 0x565c, 0x567c, none, none }, /* \| */ - { 0x8500, 0x8700, 0x8900, 0x8b00 }, /* F11 */ - { 0x8600, 0x8800, 0x8a00, 0x8c00 }, /* F12 */ -}; - -struct scaninfo key_ext_enter VAR16 = { - 0xe00d, 0xe00d, 0xe00a, 0xa600 -}; -struct scaninfo key_ext_slash VAR16 = { - 0xe02f, 0xe02f, 0x9500, 0xa400 -}; - -u16 ascii_to_keycode(u8 ascii) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(scan_to_keycode); i++) { - if ((GET_GLOBAL(scan_to_keycode[i].normal) & 0xff) == ascii) - return GET_GLOBAL(scan_to_keycode[i].normal); - if ((GET_GLOBAL(scan_to_keycode[i].shift) & 0xff) == ascii) - return GET_GLOBAL(scan_to_keycode[i].shift); - if ((GET_GLOBAL(scan_to_keycode[i].control) & 0xff) == ascii) - return GET_GLOBAL(scan_to_keycode[i].control); - } - return 0; -} - -// Handle a ps2 style scancode read from the keyboard. -static void -kbd_set_flag(int key_release, u16 set_bit0, u8 set_bit1, u16 toggle_bit) -{ - u16 flags0 = GET_BDA(kbd_flag0); - u8 flags1 = GET_BDA(kbd_flag1); - if (key_release) { - flags0 &= ~set_bit0; - flags1 &= ~set_bit1; - } else { - flags0 ^= toggle_bit; - flags0 |= set_bit0; - flags1 |= set_bit1; - } - SET_BDA(kbd_flag0, flags0); - SET_BDA(kbd_flag1, flags1); -} - -static void -kbd_ctrl_break(int key_release) -{ - if (!key_release) - return; - // Clear keyboard buffer and place 0x0000 in buffer - u16 buffer_start = GET_BDA(kbd_buf_start_offset); - SET_BDA(kbd_buf_head, buffer_start); - SET_BDA(kbd_buf_tail, buffer_start+2); - SET_FARVAR(SEG_BDA, *(u16*)(buffer_start+0), 0x0000); - // Set break flag - SET_BDA(break_flag, 0x80); - // Generate int 0x1b - struct bregs br; - memset(&br, 0, sizeof(br)); - br.flags = F_IF; - call16_int(0x1b, &br); -} - -static void -kbd_sysreq(int key_release) -{ - // SysReq generates int 0x15/0x85 - struct bregs br; - memset(&br, 0, sizeof(br)); - br.ah = 0x85; - br.al = key_release ? 0x01 : 0x00; - br.flags = F_IF; - call16_int(0x15, &br); -} - -static void -kbd_prtscr(int key_release) -{ - if (key_release) - return; - // PrtScr generates int 0x05 (ctrl-prtscr has keycode 0x7200?) - struct bregs br; - memset(&br, 0, sizeof(br)); - br.flags = F_IF; - call16_int(0x05, &br); -} - -// Handle a ps2 style scancode read from the keyboard. -static void -__process_key(u8 scancode) -{ - // Check for multi-scancode key sequences - u8 flags1 = GET_BDA(kbd_flag1); - if (scancode == 0xe0 || scancode == 0xe1) { - // Start of two byte extended (e0) or three byte pause key (e1) sequence - u8 eflag = scancode == 0xe0 ? KF1_LAST_E0 : KF1_LAST_E1; - SET_BDA(kbd_flag1, flags1 | eflag); - return; - } - int key_release = scancode & 0x80; - scancode &= ~0x80; - if (flags1 & (KF1_LAST_E0|KF1_LAST_E1)) { - if (flags1 & KF1_LAST_E1 && scancode == 0x1d) - // Ignore second byte of pause key (e1 1d 45 / e1 9d c5) - return; - // Clear E0/E1 flag in memory for next key event - SET_BDA(kbd_flag1, flags1 & ~(KF1_LAST_E0|KF1_LAST_E1)); - } - - // Check for special keys - switch (scancode) { - case 0x3a: /* Caps Lock */ - kbd_set_flag(key_release, KF0_CAPS, 0, KF0_CAPSACTIVE); - return; - case 0x2a: /* L Shift */ - if (flags1 & KF1_LAST_E0) - // Ignore fake shifts - return; - kbd_set_flag(key_release, KF0_LSHIFT, 0, 0); - return; - case 0x36: /* R Shift */ - if (flags1 & KF1_LAST_E0) - // Ignore fake shifts - return; - kbd_set_flag(key_release, KF0_RSHIFT, 0, 0); - return; - case 0x1d: /* Ctrl */ - if (flags1 & KF1_LAST_E0) - kbd_set_flag(key_release, KF0_CTRLACTIVE, KF1_RCTRL, 0); - else - kbd_set_flag(key_release, KF0_CTRLACTIVE | KF0_LCTRL, 0, 0); - return; - case 0x38: /* Alt */ - if (flags1 & KF1_LAST_E0) - kbd_set_flag(key_release, KF0_ALTACTIVE, KF1_RALT, 0); - else - kbd_set_flag(key_release, KF0_ALTACTIVE | KF0_LALT, 0, 0); - return; - case 0x45: /* Num Lock */ - if (flags1 & KF1_LAST_E1) - // XXX - pause key. - return; - kbd_set_flag(key_release, KF0_NUM, 0, KF0_NUMACTIVE); - return; - case 0x46: /* Scroll Lock */ - if (flags1 & KF1_LAST_E0) { - kbd_ctrl_break(key_release); - return; - } - kbd_set_flag(key_release, KF0_SCROLL, 0, KF0_SCROLLACTIVE); - return; - - case 0x37: /* * */ - if (flags1 & KF1_LAST_E0) { - kbd_prtscr(key_release); - return; - } - break; - case 0x54: /* SysReq */ - kbd_sysreq(key_release); - return; - case 0x53: /* Del */ - if ((GET_BDA(kbd_flag0) & (KF0_CTRLACTIVE|KF0_ALTACTIVE)) - == (KF0_CTRLACTIVE|KF0_ALTACTIVE) && !key_release) { - // Ctrl+alt+del - reset machine. - SET_BDA(soft_reset_flag, 0x1234); - reset(); - } - break; - - default: - break; - } - - // Handle generic keys - if (key_release) - // ignore key releases - return; - if (!scancode || scancode >= ARRAY_SIZE(scan_to_keycode)) { - dprintf(1, "__process_key unknown scancode read: 0x%02x!\n", scancode); - return; - } - struct scaninfo *info = &scan_to_keycode[scancode]; - if (flags1 & KF1_LAST_E0 && (scancode == 0x1c || scancode == 0x35)) - info = (scancode == 0x1c ? &key_ext_enter : &key_ext_slash); - u16 flags0 = GET_BDA(kbd_flag0); - u16 keycode; - if (flags0 & KF0_ALTACTIVE) { - keycode = GET_GLOBAL(info->alt); - } else if (flags0 & KF0_CTRLACTIVE) { - keycode = GET_GLOBAL(info->control); - } else { - u8 useshift = flags0 & (KF0_RSHIFT|KF0_LSHIFT) ? 1 : 0; - u8 ascii = GET_GLOBAL(info->normal) & 0xff; - if ((flags0 & KF0_NUMACTIVE && scancode >= 0x47 && scancode <= 0x53) - || (flags0 & KF0_CAPSACTIVE && ascii >= 'a' && ascii <= 'z')) - // Numlock/capslock toggles shift on certain keys - useshift ^= 1; - if (useshift) - keycode = GET_GLOBAL(info->shift); - else - keycode = GET_GLOBAL(info->normal); - } - if (flags1 & KF1_LAST_E0 && scancode >= 0x47 && scancode <= 0x53) { - /* extended keys handling */ - if (flags0 & KF0_ALTACTIVE) - keycode = (scancode + 0x50) << 8; - else - keycode = (keycode & 0xff00) | 0xe0; - } - if (keycode) - enqueue_key(keycode); -} - -void -process_key(u8 key) -{ - if (!CONFIG_KEYBOARD) - return; - - if (CONFIG_KBD_CALL_INT15_4F) { - // allow for keyboard intercept - struct bregs br; - memset(&br, 0, sizeof(br)); - br.eax = (0x4f << 8) | key; - br.flags = F_IF|F_CF; - call16_int(0x15, &br); - if (!(br.flags & F_CF)) - return; - key = br.eax; - } - __process_key(key); -} diff --git a/payloads/external/SeaBIOS/src/list.h b/payloads/external/SeaBIOS/src/list.h deleted file mode 100644 index 94512e30..00000000 --- a/payloads/external/SeaBIOS/src/list.h +++ /dev/null @@ -1,91 +0,0 @@ -#ifndef __LIST_H -#define __LIST_H - -#include "types.h" // container_of - - -/**************************************************************** - * hlist - Double linked lists with a single pointer list head - ****************************************************************/ - -struct hlist_node { - struct hlist_node *next, **pprev; -}; - -struct hlist_head { - struct hlist_node *first; -}; - -static inline int -hlist_empty(const struct hlist_head *h) -{ - return !h->first; -} - -static inline void -hlist_del(struct hlist_node *n) -{ - struct hlist_node *next = n->next; - struct hlist_node **pprev = n->pprev; - *pprev = next; - if (next) - next->pprev = pprev; -} - -static inline void -hlist_add(struct hlist_node *n, struct hlist_node **pprev) -{ - struct hlist_node *next = *pprev; - n->pprev = pprev; - n->next = next; - if (next) - next->pprev = &n->next; - *pprev = n; -} - -static inline void -hlist_add_head(struct hlist_node *n, struct hlist_head *h) -{ - hlist_add(n, &h->first); -} - -static inline void -hlist_add_before(struct hlist_node *n, struct hlist_node *next) -{ - hlist_add(n, next->pprev); -} - -static inline void -hlist_add_after(struct hlist_node *n, struct hlist_node *prev) -{ - hlist_add(n, &prev->next); -} - -static inline void -hlist_replace(struct hlist_node *old, struct hlist_node *new) -{ - new->next = old->next; - if (new->next) - new->next->pprev = &new->next; - new->pprev = old->pprev; - *new->pprev = new; -} - -#define hlist_for_each_entry(pos, head, member) \ - for (pos = container_of((head)->first, typeof(*pos), member) \ - ; pos != container_of(NULL, typeof(*pos), member) \ - ; pos = container_of(pos->member.next, typeof(*pos), member)) - -#define hlist_for_each_entry_safe(pos, n, head, member) \ - for (pos = container_of((head)->first, typeof(*pos), member) \ - ; pos != container_of(NULL, typeof(*pos), member) \ - && ({ n = pos->member.next; 1; }) \ - ; pos = container_of(n, typeof(*pos), member)) - -#define hlist_for_each_entry_pprev(pos, pprev, head, member) \ - for (pprev = &(head)->first \ - ; *pprev && ({ pos=container_of(*pprev, typeof(*pos), member); 1; }) \ - ; pprev = &(*pprev)->next) - - -#endif // list.h diff --git a/payloads/external/SeaBIOS/src/malloc.c b/payloads/external/SeaBIOS/src/malloc.c deleted file mode 100644 index 3733855c..00000000 --- a/payloads/external/SeaBIOS/src/malloc.c +++ /dev/null @@ -1,561 +0,0 @@ -// Internal dynamic memory allocations. -// -// Copyright (C) 2009-2013 Kevin O'Connor <kevin@koconnor.net> -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "biosvar.h" // GET_BDA -#include "config.h" // BUILD_BIOS_ADDR -#include "e820map.h" // struct e820entry -#include "list.h" // hlist_node -#include "malloc.h" // _malloc -#include "memmap.h" // PAGE_SIZE -#include "output.h" // dprintf -#include "stacks.h" // wait_preempt -#include "std/optionrom.h" // OPTION_ROM_ALIGN -#include "string.h" // memset - -// Information on a reserved area. -struct allocinfo_s { - struct hlist_node node; - u32 range_start, range_end, alloc_size; -}; - -// Information on a tracked memory allocation. -struct allocdetail_s { - struct allocinfo_s detailinfo; - struct allocinfo_s datainfo; - u32 handle; -}; - -// The various memory zones. -struct zone_s { - struct hlist_head head; -}; - -struct zone_s ZoneLow VARVERIFY32INIT, ZoneHigh VARVERIFY32INIT; -struct zone_s ZoneFSeg VARVERIFY32INIT; -struct zone_s ZoneTmpLow VARVERIFY32INIT, ZoneTmpHigh VARVERIFY32INIT; - -static struct zone_s *Zones[] VARVERIFY32INIT = { - &ZoneTmpLow, &ZoneLow, &ZoneFSeg, &ZoneTmpHigh, &ZoneHigh -}; - - -/**************************************************************** - * low-level memory reservations - ****************************************************************/ - -// Find and reserve space from a given zone -static u32 -alloc_new(struct zone_s *zone, u32 size, u32 align, struct allocinfo_s *fill) -{ - struct allocinfo_s *info; - hlist_for_each_entry(info, &zone->head, node) { - u32 alloc_end = info->range_start + info->alloc_size; - u32 range_end = info->range_end; - u32 new_range_end = ALIGN_DOWN(range_end - size, align); - if (new_range_end >= alloc_end && new_range_end <= range_end) { - // Found space - now reserve it. - fill->range_start = new_range_end; - fill->range_end = range_end; - fill->alloc_size = size; - - info->range_end = new_range_end; - hlist_add_before(&fill->node, &info->node); - return new_range_end; - } - } - return 0; -} - -// Reserve space for a 'struct allocdetail_s' and fill -static struct allocdetail_s * -alloc_new_detail(struct allocdetail_s *temp) -{ - u32 detail_addr = alloc_new(&ZoneTmpHigh, sizeof(struct allocdetail_s) - , MALLOC_MIN_ALIGN, &temp->detailinfo); - if (!detail_addr) { - detail_addr = alloc_new(&ZoneTmpLow, sizeof(struct allocdetail_s) - , MALLOC_MIN_ALIGN, &temp->detailinfo); - if (!detail_addr) { - warn_noalloc(); - return NULL; - } - } - struct allocdetail_s *detail = memremap(detail_addr, sizeof(*detail)); - - // Fill final 'detail' allocation from data in 'temp' - memcpy(detail, temp, sizeof(*detail)); - hlist_replace(&temp->detailinfo.node, &detail->detailinfo.node); - hlist_replace(&temp->datainfo.node, &detail->datainfo.node); - return detail; -} - -// Add new memory to a zone -static void -alloc_add(struct zone_s *zone, u32 start, u32 end) -{ - // Find position to add space - struct allocinfo_s *info; - struct hlist_node **pprev; - hlist_for_each_entry_pprev(info, pprev, &zone->head, node) { - if (info->range_start < start) - break; - } - - // Add space using temporary allocation info. - struct allocdetail_s tempdetail; - tempdetail.handle = MALLOC_DEFAULT_HANDLE; - tempdetail.datainfo.range_start = start; - tempdetail.datainfo.range_end = end; - tempdetail.datainfo.alloc_size = 0; - hlist_add(&tempdetail.datainfo.node, pprev); - - // Allocate final allocation info. - struct allocdetail_s *detail = alloc_new_detail(&tempdetail); - if (!detail) - hlist_del(&tempdetail.datainfo.node); -} - -// Release space allocated with alloc_new() -static void -alloc_free(struct allocinfo_s *info) -{ - struct allocinfo_s *next = container_of_or_null( - info->node.next, struct allocinfo_s, node); - if (next && next->range_end == info->range_start) - next->range_end = info->range_end; - hlist_del(&info->node); -} - -// Search all zones for an allocation obtained from alloc_new() -static struct allocinfo_s * -alloc_find(u32 data) -{ - int i; - for (i=0; i<ARRAY_SIZE(Zones); i++) { - struct allocinfo_s *info; - hlist_for_each_entry(info, &Zones[i]->head, node) { - if (info->range_start == data) - return info; - } - } - return NULL; -} - -// Find the lowest memory range added by alloc_add() -static struct allocinfo_s * -alloc_find_lowest(struct zone_s *zone) -{ - struct allocinfo_s *info, *last = NULL; - hlist_for_each_entry(info, &zone->head, node) { - last = info; - } - return last; -} - - -/**************************************************************** - * ebda movement - ****************************************************************/ - -// Move ebda -static int -relocate_ebda(u32 newebda, u32 oldebda, u8 ebda_size) -{ - u32 lowram = GET_BDA(mem_size_kb) * 1024; - if (oldebda != lowram) - // EBDA isn't at end of ram - give up. - return -1; - - // Do copy - memmove((void*)newebda, (void*)oldebda, ebda_size * 1024); - - // Update indexes - dprintf(1, "ebda moved from %x to %x\n", oldebda, newebda); - SET_BDA(mem_size_kb, newebda / 1024); - SET_BDA(ebda_seg, FLATPTR_TO_SEG(newebda)); - return 0; -} - -// Support expanding the ZoneLow dynamically. -static u32 -zonelow_expand(u32 size, u32 align, struct allocinfo_s *fill) -{ - // Make sure to not move ebda while an optionrom is running. - if (unlikely(wait_preempt())) { - u32 data = alloc_new(&ZoneLow, size, align, fill); - if (data) - return data; - } - - struct allocinfo_s *info = alloc_find_lowest(&ZoneLow); - if (!info) - return 0; - u32 oldpos = info->range_end; - u32 newpos = ALIGN_DOWN(oldpos - size, align); - u32 bottom = info->range_start + info->alloc_size; - if (newpos >= bottom && newpos <= oldpos) - // Space already present. - return alloc_new(&ZoneLow, size, align, fill); - u16 ebda_seg = get_ebda_seg(); - u32 ebda_pos = (u32)MAKE_FLATPTR(ebda_seg, 0); - u8 ebda_size = GET_EBDA(ebda_seg, size); - u32 ebda_end = ebda_pos + ebda_size * 1024; - if (ebda_end != bottom) - // Something else is after ebda - can't use any existing space. - newpos = ALIGN_DOWN(ebda_end - size, align); - u32 newbottom = ALIGN_DOWN(newpos, 1024); - u32 newebda = ALIGN_DOWN(newbottom - ebda_size * 1024, 1024); - if (newebda < BUILD_EBDA_MINIMUM) - // Not enough space. - return 0; - - // Move ebda - int ret = relocate_ebda(newebda, ebda_pos, ebda_size); - if (ret) - return 0; - - // Update zone - if (ebda_end == bottom) - info->range_start = newbottom; - else - alloc_add(&ZoneLow, newbottom, ebda_end); - - return alloc_new(&ZoneLow, size, align, fill); -} - - -/**************************************************************** - * tracked memory allocations - ****************************************************************/ - -// Allocate physical memory from the given zone and track it as a PMM allocation -u32 -malloc_palloc(struct zone_s *zone, u32 size, u32 align) -{ - ASSERT32FLAT(); - if (!size) - return 0; - - // Find and reserve space for main allocation - struct allocdetail_s tempdetail; - tempdetail.handle = MALLOC_DEFAULT_HANDLE; - u32 data = alloc_new(zone, size, align, &tempdetail.datainfo); - if (!CONFIG_MALLOC_UPPERMEMORY && !data && zone == &ZoneLow) - data = zonelow_expand(size, align, &tempdetail.datainfo); - if (!data) - return 0; - - // Find and reserve space for bookkeeping. - struct allocdetail_s *detail = alloc_new_detail(&tempdetail); - if (!detail) { - alloc_free(&tempdetail.datainfo); - return 0; - } - - dprintf(8, "phys_alloc zone=%p size=%d align=%x ret=%x (detail=%p)\n" - , zone, size, align, data, detail); - - return data; -} - -// Allocate virtual memory from the given zone -void * __malloc -_malloc(struct zone_s *zone, u32 size, u32 align) -{ - return memremap(malloc_palloc(zone, size, align), size); -} - -// Free a data block allocated with phys_alloc -int -malloc_pfree(u32 data) -{ - ASSERT32FLAT(); - struct allocinfo_s *info = alloc_find(data); - if (!info || data == virt_to_phys(info) || !info->alloc_size) - return -1; - struct allocdetail_s *detail = container_of( - info, struct allocdetail_s, datainfo); - dprintf(8, "phys_free %x (detail=%p)\n", data, detail); - alloc_free(info); - alloc_free(&detail->detailinfo); - return 0; -} - -void -free(void *data) -{ - if (!data) - return; - int ret = malloc_pfree(virt_to_phys(data)); - if (ret) - warn_internalerror(); -} - -// Find the amount of free space in a given zone. -u32 -malloc_getspace(struct zone_s *zone) -{ - // XXX - doesn't account for ZoneLow being able to grow. - // XXX - results not reliable when CONFIG_THREAD_OPTIONROMS - u32 maxspace = 0; - struct allocinfo_s *info; - hlist_for_each_entry(info, &zone->head, node) { - u32 space = info->range_end - info->range_start - info->alloc_size; - if (space > maxspace) - maxspace = space; - } - - if (zone != &ZoneTmpHigh && zone != &ZoneTmpLow) - return maxspace; - // Account for space needed for PMM tracking. - u32 reserve = ALIGN(sizeof(struct allocdetail_s), MALLOC_MIN_ALIGN); - if (maxspace <= reserve) - return 0; - return maxspace - reserve; -} - -// Set a handle associated with an allocation. -void -malloc_sethandle(u32 data, u32 handle) -{ - ASSERT32FLAT(); - struct allocinfo_s *info = alloc_find(data); - if (!info || data == virt_to_phys(info) || !info->alloc_size) - return; - struct allocdetail_s *detail = container_of( - info, struct allocdetail_s, datainfo); - detail->handle = handle; -} - -// Find the data block allocated with phys_alloc with a given handle. -u32 -malloc_findhandle(u32 handle) -{ - int i; - for (i=0; i<ARRAY_SIZE(Zones); i++) { - struct allocinfo_s *info; - hlist_for_each_entry(info, &Zones[i]->head, node) { - if (info->range_start != virt_to_phys(info)) - continue; - struct allocdetail_s *detail = container_of( - info, struct allocdetail_s, detailinfo); - if (detail->handle == handle) - return detail->datainfo.range_start; - } - } - return 0; -} - - -/**************************************************************** - * 0xc0000-0xf0000 management - ****************************************************************/ - -static u32 RomEnd = BUILD_ROM_START; -static struct allocinfo_s *RomBase; - -#define OPROM_HEADER_RESERVE 16 - -// Return the maximum memory position option roms may use. -u32 -rom_get_max(void) -{ - if (CONFIG_MALLOC_UPPERMEMORY) - return ALIGN_DOWN(RomBase->range_end - OPROM_HEADER_RESERVE - , OPTION_ROM_ALIGN); - return SYMBOL(final_readonly_start); -} - -// Return the end of the last deployed option rom. -u32 -rom_get_last(void) -{ - return RomEnd; -} - -// Request space for an optionrom in 0xc0000-0xf0000 area. -struct rom_header * -rom_reserve(u32 size) -{ - u32 newend = ALIGN(RomEnd + size, OPTION_ROM_ALIGN); - if (newend > rom_get_max()) - return NULL; - if (CONFIG_MALLOC_UPPERMEMORY) { - if (newend < SYMBOL(zonelow_base)) - newend = SYMBOL(zonelow_base); - RomBase->range_start = newend + OPROM_HEADER_RESERVE; - } - return (void*)RomEnd; -} - -// Confirm space as in use by an optionrom. -int -rom_confirm(u32 size) -{ - void *new = rom_reserve(size); - if (!new) { - warn_noalloc(); - return -1; - } - RomEnd = ALIGN(RomEnd + size, OPTION_ROM_ALIGN); - return 0; -} - - -/**************************************************************** - * Setup - ****************************************************************/ - -void -malloc_preinit(void) -{ - ASSERT32FLAT(); - dprintf(3, "malloc preinit\n"); - - // Don't declare any memory between 0xa0000 and 0x100000 - e820_remove(BUILD_LOWRAM_END, BUILD_BIOS_ADDR-BUILD_LOWRAM_END); - - // Mark known areas as reserved. - e820_add(BUILD_BIOS_ADDR, BUILD_BIOS_SIZE, E820_RESERVED); - - // Populate temp high ram - u32 highram = 0; - int i; - for (i=e820_count-1; i>=0; i--) { - struct e820entry *en = &e820_list[i]; - u64 end = en->start + en->size; - if (end < 1024*1024) - break; - if (en->type != E820_RAM || end > 0xffffffff) - continue; - u32 s = en->start, e = end; - if (!highram) { - u32 newe = ALIGN_DOWN(e - BUILD_MAX_HIGHTABLE, MALLOC_MIN_ALIGN); - if (newe <= e && newe >= s) { - highram = newe; - e = newe; - } - } - alloc_add(&ZoneTmpHigh, s, e); - } - - // Populate regions - alloc_add(&ZoneTmpLow, BUILD_STACK_ADDR, BUILD_EBDA_MINIMUM); - if (highram) { - alloc_add(&ZoneHigh, highram, highram + BUILD_MAX_HIGHTABLE); - e820_add(highram, BUILD_MAX_HIGHTABLE, E820_RESERVED); - } -} - -void -malloc_csm_preinit(u32 low_pmm, u32 low_pmm_size, u32 hi_pmm, u32 hi_pmm_size) -{ - ASSERT32FLAT(); - - if (hi_pmm_size > BUILD_MAX_HIGHTABLE) { - u32 hi_pmm_end = hi_pmm + hi_pmm_size; - alloc_add(&ZoneTmpHigh, hi_pmm, hi_pmm_end - BUILD_MAX_HIGHTABLE); - alloc_add(&ZoneHigh, hi_pmm_end - BUILD_MAX_HIGHTABLE, hi_pmm_end); - } else { - alloc_add(&ZoneTmpHigh, hi_pmm, hi_pmm + hi_pmm_size); - } - alloc_add(&ZoneTmpLow, low_pmm, low_pmm + low_pmm_size); -} - -u32 LegacyRamSize VARFSEG; - -// Calculate the maximum ramsize (less than 4gig) from e820 map. -static void -calcRamSize(void) -{ - u32 rs = 0; - int i; - for (i=e820_count-1; i>=0; i--) { - struct e820entry *en = &e820_list[i]; - u64 end = en->start + en->size; - u32 type = en->type; - if (end <= 0xffffffff && (type == E820_ACPI || type == E820_RAM)) { - rs = end; - break; - } - } - LegacyRamSize = rs >= 1024*1024 ? rs : 1024*1024; -} - -// Update pointers after code relocation. -void -malloc_init(void) -{ - ASSERT32FLAT(); - dprintf(3, "malloc init\n"); - - if (CONFIG_RELOCATE_INIT) { - // Fixup malloc pointers after relocation - int i; - for (i=0; i<ARRAY_SIZE(Zones); i++) { - struct zone_s *zone = Zones[i]; - if (zone->head.first) - zone->head.first->pprev = &zone->head.first; - } - } - - // Initialize low-memory region - memmove(VSYMBOL(final_varlow_start), VSYMBOL(varlow_start) - , SYMBOL(varlow_end) - SYMBOL(varlow_start)); - if (CONFIG_MALLOC_UPPERMEMORY) { - alloc_add(&ZoneLow, SYMBOL(zonelow_base) + OPROM_HEADER_RESERVE - , SYMBOL(final_varlow_start)); - RomBase = alloc_find_lowest(&ZoneLow); - } else { - alloc_add(&ZoneLow, ALIGN_DOWN(SYMBOL(final_varlow_start), 1024) - , SYMBOL(final_varlow_start)); - } - - // Add space available in f-segment to ZoneFSeg - memset(VSYMBOL(zonefseg_start), 0 - , SYMBOL(zonefseg_end) - SYMBOL(zonefseg_start)); - alloc_add(&ZoneFSeg, SYMBOL(zonefseg_start), SYMBOL(zonefseg_end)); - - calcRamSize(); -} - -void -malloc_prepboot(void) -{ - ASSERT32FLAT(); - dprintf(3, "malloc finalize\n"); - - u32 base = rom_get_max(); - memset((void*)RomEnd, 0, base-RomEnd); - if (CONFIG_MALLOC_UPPERMEMORY) { - // Place an optionrom signature around used low mem area. - struct rom_header *dummyrom = (void*)base; - dummyrom->signature = OPTION_ROM_SIGNATURE; - int size = (BUILD_BIOS_ADDR - base) / 512; - dummyrom->size = (size > 255) ? 255 : size; - } - - // Reserve more low-mem if needed. - u32 endlow = GET_BDA(mem_size_kb)*1024; - e820_add(endlow, BUILD_LOWRAM_END-endlow, E820_RESERVED); - - // Clear unused f-seg ram. - struct allocinfo_s *info = alloc_find_lowest(&ZoneFSeg); - u32 size = info->range_end - info->range_start; - memset(memremap(info->range_start, size), 0, size); - dprintf(1, "Space available for UMB: %x-%x, %x-%x\n" - , RomEnd, base, info->range_start, info->range_end); - - // Give back unused high ram. - info = alloc_find_lowest(&ZoneHigh); - if (info) { - u32 giveback = ALIGN_DOWN(info->range_end-info->range_start, PAGE_SIZE); - e820_add(info->range_start, giveback, E820_RAM); - dprintf(1, "Returned %d bytes of ZoneHigh\n", giveback); - } - - calcRamSize(); -} diff --git a/payloads/external/SeaBIOS/src/malloc.h b/payloads/external/SeaBIOS/src/malloc.h deleted file mode 100644 index 960a7f80..00000000 --- a/payloads/external/SeaBIOS/src/malloc.h +++ /dev/null @@ -1,70 +0,0 @@ -#ifndef __MALLOC_H -#define __MALLOC_H - -#include "types.h" // u32 - -// malloc.c -extern struct zone_s ZoneLow, ZoneHigh, ZoneFSeg, ZoneTmpLow, ZoneTmpHigh; -u32 rom_get_max(void); -u32 rom_get_last(void); -struct rom_header *rom_reserve(u32 size); -int rom_confirm(u32 size); -void malloc_csm_preinit(u32 low_pmm, u32 low_pmm_size, u32 hi_pmm, - u32 hi_pmm_size); -void malloc_preinit(void); -extern u32 LegacyRamSize; -void malloc_init(void); -void malloc_prepboot(void); -u32 malloc_palloc(struct zone_s *zone, u32 size, u32 align); -void *_malloc(struct zone_s *zone, u32 size, u32 align); -int malloc_pfree(u32 data); -void free(void *data); -u32 malloc_getspace(struct zone_s *zone); -void malloc_sethandle(u32 data, u32 handle); -u32 malloc_findhandle(u32 handle); - -#define MALLOC_DEFAULT_HANDLE 0xFFFFFFFF -// Minimum alignment of malloc'd memory -#define MALLOC_MIN_ALIGN 16 -// Helper functions for memory allocation. -static inline void *malloc_low(u32 size) { - return _malloc(&ZoneLow, size, MALLOC_MIN_ALIGN); -} -static inline void *malloc_high(u32 size) { - return _malloc(&ZoneHigh, size, MALLOC_MIN_ALIGN); -} -static inline void *malloc_fseg(u32 size) { - return _malloc(&ZoneFSeg, size, MALLOC_MIN_ALIGN); -} -static inline void *malloc_tmplow(u32 size) { - return _malloc(&ZoneTmpLow, size, MALLOC_MIN_ALIGN); -} -static inline void *malloc_tmphigh(u32 size) { - return _malloc(&ZoneTmpHigh, size, MALLOC_MIN_ALIGN); -} -static inline void *malloc_tmp(u32 size) { - void *ret = malloc_tmphigh(size); - if (ret) - return ret; - return malloc_tmplow(size); -} -static inline void *memalign_low(u32 align, u32 size) { - return _malloc(&ZoneLow, size, align); -} -static inline void *memalign_high(u32 align, u32 size) { - return _malloc(&ZoneHigh, size, align); -} -static inline void *memalign_tmplow(u32 align, u32 size) { - return _malloc(&ZoneTmpLow, size, align); -} -static inline void *memalign_tmphigh(u32 align, u32 size) { - return _malloc(&ZoneTmpHigh, size, align); -} -static inline void *memalign_tmp(u32 align, u32 size) { - void *ret = memalign_tmphigh(align, size); - if (ret) - return ret; - return memalign_tmplow(align, size); -} - -#endif // malloc.h diff --git a/payloads/external/SeaBIOS/src/memmap.h b/payloads/external/SeaBIOS/src/memmap.h deleted file mode 100644 index 22bd4bcb..00000000 --- a/payloads/external/SeaBIOS/src/memmap.h +++ /dev/null @@ -1,21 +0,0 @@ -#ifndef __MEMMAP_H -#define __MEMMAP_H - -#include "types.h" // u32 - -// A typical OS page size -#define PAGE_SIZE 4096 -#define PAGE_SHIFT 12 - -static inline u32 virt_to_phys(void *v) { - return (u32)v; -} -static inline void *memremap(u32 addr, u32 len) { - return (void*)addr; -} - -// Return the value of a linker script symbol (see scripts/layoutrom.py) -#define SYMBOL(SYM) ({ extern char SYM; (u32)&SYM; }) -#define VSYMBOL(SYM) ((void*)SYMBOL(SYM)) - -#endif // memmap.h diff --git a/payloads/external/SeaBIOS/src/misc.c b/payloads/external/SeaBIOS/src/misc.c deleted file mode 100644 index b5117304..00000000 --- a/payloads/external/SeaBIOS/src/misc.c +++ /dev/null @@ -1,195 +0,0 @@ -// Code for misc 16bit handlers and variables. -// -// Copyright (C) 2008,2009 Kevin O'Connor <kevin@koconnor.net> -// Copyright (C) 2002 MandrakeSoft S.A. -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "biosvar.h" // GET_BDA -#include "bregs.h" // struct bregs -#include "hw/pic.h" // enable_hwirq -#include "output.h" // debug_enter -#include "stacks.h" // call16_int -#include "string.h" // memset - -#define PORT_MATH_CLEAR 0x00f0 - -// Indicator if POST phase has been started (and if it has completed). -int HaveRunPost VARFSEG; - -int -in_post(void) -{ - return GET_GLOBAL(HaveRunPost) == 1; -} - - -/**************************************************************** - * Misc 16bit ISRs - ****************************************************************/ - -// INT 12h Memory Size Service Entry Point -void VISIBLE16 -handle_12(struct bregs *regs) -{ - debug_enter(regs, DEBUG_HDL_12); - regs->ax = GET_BDA(mem_size_kb); -} - -// INT 11h Equipment List Service Entry Point -void VISIBLE16 -handle_11(struct bregs *regs) -{ - debug_enter(regs, DEBUG_HDL_11); - regs->ax = GET_BDA(equipment_list_flags); -} - -// INT 05h Print Screen Service Entry Point -void VISIBLE16 -handle_05(struct bregs *regs) -{ - debug_enter(regs, DEBUG_HDL_05); -} - -// NMI handler -void VISIBLE16 -handle_02(void) -{ - debug_isr(DEBUG_ISR_02); -} - -void -mathcp_setup(void) -{ - dprintf(3, "math cp init\n"); - // 80x87 coprocessor installed - set_equipment_flags(0x02, 0x02); - enable_hwirq(13, FUNC16(entry_75)); -} - -// INT 75 - IRQ13 - MATH COPROCESSOR EXCEPTION -void VISIBLE16 -handle_75(void) -{ - debug_isr(DEBUG_ISR_75); - - // clear irq13 - outb(0, PORT_MATH_CLEAR); - // clear interrupt - pic_eoi2(); - // legacy nmi call - struct bregs br; - memset(&br, 0, sizeof(br)); - br.flags = F_IF; - call16_int(0x02, &br); -} - - -/**************************************************************** - * BIOS_CONFIG_TABLE - ****************************************************************/ - -// DMA channel 3 used by hard disk BIOS -#define CBT_F1_DMA3USED (1<<7) -// 2nd interrupt controller (8259) installed -#define CBT_F1_2NDPIC (1<<6) -// Real-Time Clock installed -#define CBT_F1_RTC (1<<5) -// INT 15/AH=4Fh called upon INT 09h -#define CBT_F1_INT154F (1<<4) -// wait for external event (INT 15/AH=41h) supported -#define CBT_F1_WAITEXT (1<<3) -// extended BIOS area allocated (usually at top of RAM) -#define CBT_F1_EBDA (1<<2) -// bus is Micro Channel instead of ISA -#define CBT_F1_MCA (1<<1) -// system has dual bus (Micro Channel + ISA) -#define CBT_F1_MCAISA (1<<0) - -// INT 16/AH=09h (keyboard functionality) supported -#define CBT_F2_INT1609 (1<<6) - -struct bios_config_table_s BIOS_CONFIG_TABLE VARFSEGFIXED(0xe6f5) = { - .size = sizeof(BIOS_CONFIG_TABLE) - 2, - .model = BUILD_MODEL_ID, - .submodel = BUILD_SUBMODEL_ID, - .biosrev = BUILD_BIOS_REVISION, - .feature1 = ( - CBT_F1_2NDPIC | CBT_F1_RTC | CBT_F1_EBDA - | (CONFIG_KBD_CALL_INT15_4F ? CBT_F1_INT154F : 0)), - .feature2 = CBT_F2_INT1609, - .feature3 = 0, - .feature4 = 0, - .feature5 = 0, -}; - - -/**************************************************************** - * GDT and IDT tables - ****************************************************************/ - -// Real mode IDT descriptor -struct descloc_s rmode_IDT_info VARFSEG = { - .length = sizeof(struct rmode_IVT) - 1, - .addr = (u32)MAKE_FLATPTR(SEG_IVT, 0), -}; - -// Dummy IDT that forces a machine shutdown if an irq happens in -// protected mode. -u8 dummy_IDT VARFSEG; - -// Protected mode IDT descriptor -struct descloc_s pmode_IDT_info VARFSEG = { - .length = sizeof(dummy_IDT) - 1, - .addr = (u32)&dummy_IDT, -}; - -// GDT -u64 rombios32_gdt[] VARFSEG __aligned(8) = { - // First entry can't be used. - 0x0000000000000000LL, - // 32 bit flat code segment (SEG32_MODE32_CS) - GDT_GRANLIMIT(0xffffffff) | GDT_CODE | GDT_B, - // 32 bit flat data segment (SEG32_MODE32_DS) - GDT_GRANLIMIT(0xffffffff) | GDT_DATA | GDT_B, - // 16 bit code segment base=0xf0000 limit=0xffff (SEG32_MODE16_CS) - GDT_LIMIT(BUILD_BIOS_SIZE-1) | GDT_CODE | GDT_BASE(BUILD_BIOS_ADDR), - // 16 bit data segment base=0x0 limit=0xffff (SEG32_MODE16_DS) - GDT_LIMIT(0x0ffff) | GDT_DATA, - // 16 bit code segment base=0xf0000 limit=0xffffffff (SEG32_MODE16BIG_CS) - GDT_GRANLIMIT(0xffffffff) | GDT_CODE | GDT_BASE(BUILD_BIOS_ADDR), - // 16 bit data segment base=0 limit=0xffffffff (SEG32_MODE16BIG_DS) - GDT_GRANLIMIT(0xffffffff) | GDT_DATA, -}; - -// GDT descriptor -struct descloc_s rombios32_gdt_48 VARFSEG = { - .length = sizeof(rombios32_gdt) - 1, - .addr = (u32)rombios32_gdt, -}; - - -/**************************************************************** - * Misc fixed vars - ****************************************************************/ - -// BIOS build date -char BiosDate[] VARFSEGFIXED(0xfff5) = "06/23/99"; - -u8 BiosModelId VARFSEGFIXED(0xfffe) = BUILD_MODEL_ID; - -u8 BiosChecksum VARFSEGFIXED(0xffff); - -struct floppy_dbt_s diskette_param_table VARFSEGFIXED(0xefc7); - -// Old Fixed Disk Parameter Table (newer tables are in the ebda). -struct fdpt_s OldFDPT VARFSEGFIXED(0xe401); - -// XXX - Baud Rate Generator Table -u8 BaudTable[16] VARFSEGFIXED(0xe729); - -// XXX - Initial Interrupt Vector Offsets Loaded by POST -u8 InitVectors[13] VARFSEGFIXED(0xfef3); - -// XXX - INT 1D - SYSTEM DATA - VIDEO PARAMETER TABLES -u8 VideoParams[88] VARFSEGFIXED(0xf0a4); diff --git a/payloads/external/SeaBIOS/src/mouse.c b/payloads/external/SeaBIOS/src/mouse.c deleted file mode 100644 index b7ad7c62..00000000 --- a/payloads/external/SeaBIOS/src/mouse.c +++ /dev/null @@ -1,342 +0,0 @@ -// 16bit code to handle mouse events. -// -// Copyright (C) 2008 Kevin O'Connor <kevin@koconnor.net> -// Copyright (C) 2002 MandrakeSoft S.A. -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "biosvar.h" // GET_EBDA -#include "bregs.h" // struct bregs -#include "hw/ps2port.h" // ps2_mouse_command -#include "hw/usb-hid.h" // usb_mouse_command -#include "output.h" // dprintf -#include "stacks.h" // stack_hop_back -#include "util.h" // mouse_init - -void -mouse_init(void) -{ - if (! CONFIG_MOUSE) - return; - dprintf(3, "init mouse\n"); - // pointing device installed - set_equipment_flags(0x04, 0x04); -} - -static int -mouse_command(int command, u8 *param) -{ - if (usb_mouse_active()) - return usb_mouse_command(command, param); - return ps2_mouse_command(command, param); -} - -#define RET_SUCCESS 0x00 -#define RET_EINVFUNCTION 0x01 -#define RET_EINVINPUT 0x02 -#define RET_EINTERFACE 0x03 -#define RET_ENEEDRESEND 0x04 -#define RET_ENOHANDLER 0x05 - -// Disable Mouse -static void -mouse_15c20000(struct bregs *regs) -{ - int ret = mouse_command(PSMOUSE_CMD_DISABLE, NULL); - if (ret) - set_code_invalid(regs, RET_ENEEDRESEND); - else - set_code_success(regs); -} - -// Enable Mouse -static void -mouse_15c20001(struct bregs *regs) -{ - u16 ebda_seg = get_ebda_seg(); - u8 mouse_flags_2 = GET_EBDA(ebda_seg, mouse_flag2); - if ((mouse_flags_2 & 0x80) == 0) { - set_code_invalid(regs, RET_ENOHANDLER); - return; - } - - int ret = mouse_command(PSMOUSE_CMD_ENABLE, NULL); - if (ret) - set_code_invalid(regs, RET_ENEEDRESEND); - else - set_code_success(regs); -} - -static void -mouse_15c200XX(struct bregs *regs) -{ - set_code_unimplemented(regs, RET_EINVFUNCTION); -} - -// Disable/Enable Mouse -static void -mouse_15c200(struct bregs *regs) -{ - switch (regs->bh) { - case 0x00: mouse_15c20000(regs); break; - case 0x01: mouse_15c20001(regs); break; - default: mouse_15c200XX(regs); break; - } -} - -// Reset Mouse -static void -mouse_15c201(struct bregs *regs) -{ - u8 param[2]; - int ret = mouse_command(PSMOUSE_CMD_RESET_BAT, param); - if (ret) { - set_code_invalid(regs, RET_ENEEDRESEND); - return; - } - regs->bl = param[0]; - regs->bh = param[1]; - set_code_success(regs); -} - -// Set Sample Rate -static void -mouse_15c202(struct bregs *regs) -{ - static u8 VAR16 sample_rates[7] = {10, 20, 40, 60, 80, 100, 200}; - if (regs->bh >= ARRAY_SIZE(sample_rates)) { - set_code_invalid(regs, RET_EINVINPUT); - return; - } - u8 mouse_data1 = GET_GLOBAL(sample_rates[regs->bh]); - int ret = mouse_command(PSMOUSE_CMD_SETRATE, &mouse_data1); - if (ret) - set_code_invalid(regs, RET_ENEEDRESEND); - else - set_code_success(regs); -} - -// Set Resolution -static void -mouse_15c203(struct bregs *regs) -{ - // BH: - // 0 = 25 dpi, 1 count per millimeter - // 1 = 50 dpi, 2 counts per millimeter - // 2 = 100 dpi, 4 counts per millimeter - // 3 = 200 dpi, 8 counts per millimeter - if (regs->bh >= 4) { - set_code_invalid(regs, RET_EINVINPUT); - return; - } - u8 param = regs->bh; - int ret = mouse_command(PSMOUSE_CMD_SETRES, ¶m); - if (ret) - set_code_invalid(regs, RET_ENEEDRESEND); - else - set_code_success(regs); -} - -// Get Device ID -static void -mouse_15c204(struct bregs *regs) -{ - u8 param[2]; - int ret = mouse_command(PSMOUSE_CMD_GETID, param); - if (ret) { - set_code_invalid(regs, RET_ENEEDRESEND); - return; - } - regs->bh = param[0]; - set_code_success(regs); -} - -// Initialize Mouse -static void -mouse_15c205(struct bregs *regs) -{ - if (regs->bh != 3) { - set_code_invalid(regs, RET_EINTERFACE); - return; - } - u16 ebda_seg = get_ebda_seg(); - SET_EBDA(ebda_seg, mouse_flag1, 0x00); - SET_EBDA(ebda_seg, mouse_flag2, regs->bh); - - // Reset Mouse - mouse_15c201(regs); -} - -// Return Status -static void -mouse_15c20600(struct bregs *regs) -{ - u8 param[3]; - int ret = mouse_command(PSMOUSE_CMD_GETINFO, param); - if (ret) { - set_code_invalid(regs, RET_ENEEDRESEND); - return; - } - regs->bl = param[0]; - regs->cl = param[1]; - regs->dl = param[2]; - set_code_success(regs); -} - -// Set Scaling Factor to 1:1 -static void -mouse_15c20601(struct bregs *regs) -{ - int ret = mouse_command(PSMOUSE_CMD_SETSCALE11, NULL); - if (ret) - set_code_invalid(regs, RET_ENEEDRESEND); - else - set_code_success(regs); -} - -// Set Scaling Factor to 2:1 -static void -mouse_15c20602(struct bregs *regs) -{ - int ret = mouse_command(PSMOUSE_CMD_SETSCALE21, NULL); - if (ret) - set_code_invalid(regs, RET_ENEEDRESEND); - else - set_code_success(regs); -} - -static void -mouse_15c206XX(struct bregs *regs) -{ - set_code_unimplemented(regs, RET_EINVFUNCTION); -} - -// Return Status & Set Scaling Factor... -static void -mouse_15c206(struct bregs *regs) -{ - switch (regs->bh) { - case 0x00: mouse_15c20600(regs); break; - case 0x01: mouse_15c20601(regs); break; - case 0x02: mouse_15c20602(regs); break; - default: mouse_15c206XX(regs); break; - } -} - -// Set Mouse Handler Address -static void -mouse_15c207(struct bregs *regs) -{ - struct segoff_s farptr = SEGOFF(regs->es, regs->bx); - u16 ebda_seg = get_ebda_seg(); - u8 mouse_flags_2 = GET_EBDA(ebda_seg, mouse_flag2); - if (! farptr.segoff) { - /* remove handler */ - if ((mouse_flags_2 & 0x80) != 0) { - mouse_flags_2 &= ~0x80; - mouse_command(PSMOUSE_CMD_DISABLE, NULL); - } - } else { - /* install handler */ - mouse_flags_2 |= 0x80; - } - SET_EBDA(ebda_seg, mouse_flag2, mouse_flags_2); - SET_EBDA(ebda_seg, far_call_pointer, farptr); - set_code_success(regs); -} - -static void -mouse_15c2XX(struct bregs *regs) -{ - set_code_unimplemented(regs, RET_EINVFUNCTION); -} - -void -handle_15c2(struct bregs *regs) -{ - //debug_stub(regs); - - if (! CONFIG_MOUSE) { - set_code_invalid(regs, RET_EUNSUPPORTED); - return; - } - - switch (regs->al) { - case 0x00: mouse_15c200(regs); break; - case 0x01: mouse_15c201(regs); break; - case 0x02: mouse_15c202(regs); break; - case 0x03: mouse_15c203(regs); break; - case 0x04: mouse_15c204(regs); break; - case 0x05: mouse_15c205(regs); break; - case 0x06: mouse_15c206(regs); break; - case 0x07: mouse_15c207(regs); break; - default: mouse_15c2XX(regs); break; - } -} - -void VISIBLE16 -invoke_mouse_handler(void) -{ - if (!CONFIG_MOUSE) - return; - if (need_hop_back()) { - stack_hop_back(invoke_mouse_handler, 0, 0); - return; - } - ASSERT16(); - u16 ebda_seg = get_ebda_seg(); - u16 status = GET_EBDA(ebda_seg, mouse_data[0]); - u16 X = GET_EBDA(ebda_seg, mouse_data[1]); - u16 Y = GET_EBDA(ebda_seg, mouse_data[2]); - - struct segoff_s func = GET_EBDA(ebda_seg, far_call_pointer); - dprintf(16, "mouse farcall s=%04x x=%04x y=%04x func=%04x:%04x\n" - , status, X, Y, func.seg, func.offset); - - asm volatile( - "pushl %%ebp\n" - "sti\n" - - "pushl %0\n" - "pushw %w1\n" // status - "pushw %w2\n" // X - "pushw %w3\n" // Y - "pushw $0\n" // Z - "lcallw *8(%%esp)\n" - "addl $12, %%esp\n" - - "cli\n" - "cld\n" - "popl %%ebp" - : "+a"(func.segoff), "+c"(status), "+d"(X), "+b"(Y) - : - : "edi", "esi", "cc", "memory"); -} - -void -process_mouse(u8 data) -{ - if (!CONFIG_MOUSE) - return; - - u16 ebda_seg = get_ebda_seg(); - u8 mouse_flags_1 = GET_EBDA(ebda_seg, mouse_flag1); - u8 mouse_flags_2 = GET_EBDA(ebda_seg, mouse_flag2); - - if (! (mouse_flags_2 & 0x80)) - // far call handler not installed - return; - - u8 package_count = mouse_flags_2 & 0x07; - u8 index = mouse_flags_1 & 0x07; - SET_EBDA(ebda_seg, mouse_data[index], data); - - if ((index+1) < package_count) { - mouse_flags_1++; - SET_EBDA(ebda_seg, mouse_flag1, mouse_flags_1); - return; - } - - SET_EBDA(ebda_seg, mouse_flag1, 0); - invoke_mouse_handler(); -} diff --git a/payloads/external/SeaBIOS/src/optionroms.c b/payloads/external/SeaBIOS/src/optionroms.c deleted file mode 100644 index e906ab97..00000000 --- a/payloads/external/SeaBIOS/src/optionroms.c +++ /dev/null @@ -1,499 +0,0 @@ -// Option rom scanning code. -// -// Copyright (C) 2008 Kevin O'Connor <kevin@koconnor.net> -// Copyright (C) 2002 MandrakeSoft S.A. -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "bregs.h" // struct bregs -#include "config.h" // CONFIG_* -#include "farptr.h" // FLATPTR_TO_SEG -#include "biosvar.h" // GET_IVT -#include "hw/pci.h" // pci_config_readl -#include "hw/pcidevice.h" // foreachpci -#include "hw/pci_ids.h" // PCI_CLASS_DISPLAY_VGA -#include "hw/pci_regs.h" // PCI_ROM_ADDRESS -#include "malloc.h" // rom_confirm -#include "output.h" // dprintf -#include "romfile.h" // romfile_loadint -#include "stacks.h" // farcall16big -#include "std/optionrom.h" // struct rom_header -#include "std/pnpbios.h" // PNP_SIGNATURE -#include "string.h" // memset -#include "util.h" // get_pnp_offset -#include "tcgbios.h" // tpm_* - -static int EnforceChecksum, S3ResumeVga, RunPCIroms; - - -/**************************************************************** - * Helper functions - ****************************************************************/ - -// Execute a given option rom. -static void -__callrom(struct rom_header *rom, u16 offset, u16 bdf) -{ - u16 seg = FLATPTR_TO_SEG(rom); - dprintf(1, "Running option rom at %04x:%04x\n", seg, offset); - - struct bregs br; - memset(&br, 0, sizeof(br)); - br.flags = F_IF; - br.ax = bdf; - br.bx = 0xffff; - br.dx = 0xffff; - br.es = SEG_BIOS; - br.di = get_pnp_offset(); - br.code = SEGOFF(seg, offset); - start_preempt(); - farcall16big(&br); - finish_preempt(); -} - -// Execute a given option rom at the standard entry vector. -void -callrom(struct rom_header *rom, u16 bdf) -{ - __callrom(rom, OPTION_ROM_INITVECTOR, bdf); -} - -// Execute a BCV option rom registered via add_bcv(). -void -call_bcv(u16 seg, u16 ip) -{ - __callrom(MAKE_FLATPTR(seg, 0), ip, 0); -} - -// Verify that an option rom looks valid -static int -is_valid_rom(struct rom_header *rom) -{ - dprintf(6, "Checking rom %p (sig %x size %d)\n" - , rom, rom->signature, rom->size); - if (rom->signature != OPTION_ROM_SIGNATURE) - return 0; - if (! rom->size) - return 0; - u32 len = rom->size * 512; - u8 sum = checksum(rom, len); - if (sum != 0) { - dprintf(1, "Found option rom with bad checksum: loc=%p len=%d sum=%x\n" - , rom, len, sum); - if (EnforceChecksum) - return 0; - } - return 1; -} - -// Check if a valid option rom has a pnp struct; return it if so. -static struct pnp_data * -get_pnp_rom(struct rom_header *rom) -{ - struct pnp_data *pnp = (void*)((u8*)rom + rom->pnpoffset); - if (pnp->signature != PNP_SIGNATURE) - return NULL; - return pnp; -} - -// Check for multiple pnp option rom headers. -static struct pnp_data * -get_pnp_next(struct rom_header *rom, struct pnp_data *pnp) -{ - if (! pnp->nextoffset) - return NULL; - pnp = (void*)((u8*)rom + pnp->nextoffset); - if (pnp->signature != PNP_SIGNATURE) - return NULL; - return pnp; -} - -// Check if a valid option rom has a pci struct; return it if so. -static struct pci_data * -get_pci_rom(struct rom_header *rom) -{ - struct pci_data *pd = (void*)((u32)rom + rom->pcioffset); - if (pd->signature != PCI_ROM_SIGNATURE) - return NULL; - if (rom->pcioffset & 3) - dprintf(1, "WARNING! Found unaligned PCI rom (vd=%04x:%04x)\n" - , pd->vendor, pd->device); - return pd; -} - -// Run rom init code and note rom size. -static int -init_optionrom(struct rom_header *rom, u16 bdf, int isvga) -{ - if (! is_valid_rom(rom)) - return -1; - struct rom_header *newrom = rom_reserve(rom->size * 512); - if (!newrom) { - warn_noalloc(); - return -1; - } - if (newrom != rom) - memmove(newrom, rom, rom->size * 512); - - tpm_option_rom(newrom, rom->size * 512); - - if (isvga || get_pnp_rom(newrom)) - // Only init vga and PnP roms here. - callrom(newrom, bdf); - - return rom_confirm(newrom->size * 512); -} - -#define RS_PCIROM (1LL<<33) - -static void -setRomSource(u64 *sources, struct rom_header *rom, u64 source) -{ - if (sources) - sources[((u32)rom - BUILD_ROM_START) / OPTION_ROM_ALIGN] = source; -} - -static int -getRomPriority(u64 *sources, struct rom_header *rom, int instance) -{ - u64 source = sources[((u32)rom - BUILD_ROM_START) / OPTION_ROM_ALIGN]; - if (!source) - return -1; - if (source & RS_PCIROM) - return bootprio_find_pci_rom((void*)(u32)source, instance); - struct romfile_s *file = (void*)(u32)source; - return bootprio_find_named_rom(file->name, instance); -} - - -/**************************************************************** - * Roms in CBFS - ****************************************************************/ - -static struct rom_header * -deploy_romfile(struct romfile_s *file) -{ - u32 size = file->size; - struct rom_header *rom = rom_reserve(size); - if (!rom) { - warn_noalloc(); - return NULL; - } - int ret = file->copy(file, rom, size); - if (ret <= 0) - return NULL; - return rom; -} - -// Run all roms in a given CBFS directory. -static void -run_file_roms(const char *prefix, int isvga, u64 *sources) -{ - struct romfile_s *file = NULL; - for (;;) { - file = romfile_findprefix(prefix, file); - if (!file) - break; - struct rom_header *rom = deploy_romfile(file); - if (rom) { - setRomSource(sources, rom, (u32)file); - init_optionrom(rom, 0, isvga); - } - } -} - - -/**************************************************************** - * PCI roms - ****************************************************************/ - -// Verify device is a vga device with legacy address decoding enabled. -int -is_pci_vga(struct pci_device *pci) -{ - if (pci->class != PCI_CLASS_DISPLAY_VGA) - return 0; - u16 cmd = pci_config_readw(pci->bdf, PCI_COMMAND); - if (!(cmd & PCI_COMMAND_IO && cmd & PCI_COMMAND_MEMORY)) - return 0; - while (pci->parent) { - pci = pci->parent; - u32 ctrl = pci_config_readb(pci->bdf, PCI_BRIDGE_CONTROL); - if (!(ctrl & PCI_BRIDGE_CTL_VGA)) - return 0; - } - return 1; -} - -// Copy a rom to its permanent location below 1MiB -static struct rom_header * -copy_rom(struct rom_header *rom) -{ - u32 romsize = rom->size * 512; - struct rom_header *newrom = rom_reserve(romsize); - if (!newrom) { - warn_noalloc(); - return NULL; - } - dprintf(4, "Copying option rom (size %d) from %p to %p\n" - , romsize, rom, newrom); - iomemcpy(newrom, rom, romsize); - return newrom; -} - -// Map the option rom of a given PCI device. -static struct rom_header * -map_pcirom(struct pci_device *pci) -{ - dprintf(6, "Attempting to map option rom on dev %pP\n", pci); - - if ((pci->header_type & 0x7f) != PCI_HEADER_TYPE_NORMAL) { - dprintf(6, "Skipping non-normal pci device (type=%x)\n" - , pci->header_type); - return NULL; - } - - u16 bdf = pci->bdf; - u32 orig = pci_config_readl(bdf, PCI_ROM_ADDRESS); - pci_config_writel(bdf, PCI_ROM_ADDRESS, ~PCI_ROM_ADDRESS_ENABLE); - u32 sz = pci_config_readl(bdf, PCI_ROM_ADDRESS); - - dprintf(6, "Option rom sizing returned %x %x\n", orig, sz); - orig &= ~PCI_ROM_ADDRESS_ENABLE; - if (!sz || sz == 0xffffffff) - goto fail; - - if (orig == sz || (u32)(orig + 4*1024*1024) < 20*1024*1024) { - // Don't try to map to a pci addresses at its max, in the last - // 4MiB of ram, or the first 16MiB of ram. - dprintf(6, "Preset rom address doesn't look valid\n"); - goto fail; - } - - // Looks like a rom - enable it. - pci_config_writel(bdf, PCI_ROM_ADDRESS, orig | PCI_ROM_ADDRESS_ENABLE); - - struct rom_header *rom = (void*)orig; - for (;;) { - dprintf(5, "Inspecting possible rom at %p (vd=%04x:%04x bdf=%pP)\n" - , rom, pci->vendor, pci->device, pci); - if (rom->signature != OPTION_ROM_SIGNATURE) { - dprintf(6, "No option rom signature (got %x)\n", rom->signature); - goto fail; - } - struct pci_data *pd = get_pci_rom(rom); - if (! pd) { - dprintf(6, "No valid pci signature found\n"); - goto fail; - } - - if (pd->vendor == pci->vendor && pd->device == pci->device - && pd->type == PCIROM_CODETYPE_X86) - // A match - break; - dprintf(6, "Didn't match dev/ven (got %04x:%04x) or type (got %d)\n" - , pd->vendor, pd->device, pd->type); - if (pd->indicator & 0x80) { - dprintf(6, "No more images left\n"); - goto fail; - } - rom = (void*)((u32)rom + pd->ilen * 512); - } - - rom = copy_rom(rom); - pci_config_writel(bdf, PCI_ROM_ADDRESS, orig); - return rom; -fail: - // Not valid - restore original and exit. - pci_config_writel(bdf, PCI_ROM_ADDRESS, orig); - return NULL; -} - -static int boot_irq_captured(void) -{ - return GET_IVT(0x19).segoff != FUNC16(entry_19_official).segoff; -} - -static void boot_irq_restore(void) -{ - struct segoff_s seabios; - - seabios = FUNC16(entry_19_official); - SET_IVT(0x19, seabios); -} - -// Attempt to map and initialize the option rom on a given PCI device. -static void -init_pcirom(struct pci_device *pci, int isvga, u64 *sources) -{ - dprintf(4, "Attempting to init PCI bdf %pP (vd %04x:%04x)\n" - , pci, pci->vendor, pci->device); - - char fname[17]; - snprintf(fname, sizeof(fname), "pci%04x,%04x.rom" - , pci->vendor, pci->device); - struct romfile_s *file = romfile_find(fname); - struct rom_header *rom = NULL; - if (file) - rom = deploy_romfile(file); - else if (RunPCIroms > 1 || (RunPCIroms == 1 && isvga)) - rom = map_pcirom(pci); - if (! rom) - // No ROM present. - return; - int irq_was_captured = boot_irq_captured(); - struct pnp_data *pnp = get_pnp_rom(rom); - setRomSource(sources, rom, RS_PCIROM | (u32)pci); - init_optionrom(rom, pci->bdf, isvga); - if (boot_irq_captured() && !irq_was_captured && - !file && !isvga && pnp) { - // This PCI rom is misbehaving - recapture the boot irqs - char *desc = MAKE_FLATPTR(FLATPTR_TO_SEG(rom), pnp->productname); - dprintf(1, "PnP optionrom \"%s\" (bdf %pP) captured int19, restoring\n", - desc, pci); - boot_irq_restore(); - } -} - - -/**************************************************************** - * Non-VGA option rom init - ****************************************************************/ - -void -optionrom_setup(void) -{ - if (! CONFIG_OPTIONROMS) - return; - - dprintf(1, "Scan for option roms\n"); - u64 sources[(BUILD_BIOS_ADDR - BUILD_ROM_START) / OPTION_ROM_ALIGN]; - memset(sources, 0, sizeof(sources)); - u32 post_vga = rom_get_last(); - - // Find and deploy PCI roms. - struct pci_device *pci; - foreachpci(pci) { - if (pci->class == PCI_CLASS_DISPLAY_VGA || - pci->class == PCI_CLASS_DISPLAY_OTHER || - pci->have_driver) - continue; - init_pcirom(pci, 0, sources); - } - - // Find and deploy CBFS roms not associated with a device. - run_file_roms("genroms/", 0, sources); - rom_reserve(0); - - // All option roms found and deployed - now build BEV/BCV vectors. - - u32 pos = post_vga; - while (pos < rom_get_last()) { - struct rom_header *rom = (void*)pos; - if (! is_valid_rom(rom)) { - pos += OPTION_ROM_ALIGN; - continue; - } - pos += ALIGN(rom->size * 512, OPTION_ROM_ALIGN); - struct pnp_data *pnp = get_pnp_rom(rom); - if (! pnp) { - // Legacy rom. - boot_add_bcv(FLATPTR_TO_SEG(rom), OPTION_ROM_INITVECTOR, 0 - , getRomPriority(sources, rom, 0)); - continue; - } - // PnP rom - check for BEV and BCV boot capabilities. - int instance = 0; - while (pnp) { - if (pnp->bev) - boot_add_bev(FLATPTR_TO_SEG(rom), pnp->bev, pnp->productname - , getRomPriority(sources, rom, instance++)); - else if (pnp->bcv) - boot_add_bcv(FLATPTR_TO_SEG(rom), pnp->bcv, pnp->productname - , getRomPriority(sources, rom, instance++)); - else - break; - pnp = get_pnp_next(rom, pnp); - } - } -} - - -/**************************************************************** - * VGA init - ****************************************************************/ - -int ScreenAndDebug; -struct rom_header *VgaROM; - -static void try_setup_display_other(void) -{ - struct pci_device *pci; - - dprintf(1, "No VGA found, scan for other display\n"); - - foreachpci(pci) { - if (pci->class != PCI_CLASS_DISPLAY_OTHER) - continue; - struct rom_header *rom = map_pcirom(pci); - if (!rom) - continue; - dprintf(1, "Other display found at %pP\n", pci); - pci_config_maskw(pci->bdf, PCI_COMMAND, 0, - PCI_COMMAND_IO | PCI_COMMAND_MEMORY); - init_optionrom(rom, pci->bdf, 1); - return; - } -} - -// Call into vga code to turn on console. -void -vgarom_setup(void) -{ - int have_vga = 0; - - if (! CONFIG_OPTIONROMS) - return; - - dprintf(1, "Scan for VGA option rom\n"); - - // Load some config settings that impact VGA. - EnforceChecksum = romfile_loadint("etc/optionroms-checksum", 1); - S3ResumeVga = romfile_loadint("etc/s3-resume-vga-init", CONFIG_QEMU); - RunPCIroms = romfile_loadint("etc/pci-optionrom-exec", 2); - ScreenAndDebug = romfile_loadint("etc/screen-and-debug", 1); - - // Clear option rom memory - memset((void*)BUILD_ROM_START, 0, rom_get_max() - BUILD_ROM_START); - - // Find and deploy PCI VGA rom. - struct pci_device *pci; - foreachpci(pci) { - if (!is_pci_vga(pci)) - continue; - vgahook_setup(pci); - init_pcirom(pci, 1, NULL); - have_vga = 1; - break; - } - if (!have_vga) - try_setup_display_other(); - - // Find and deploy CBFS vga-style roms not associated with a device. - run_file_roms("vgaroms/", 1, NULL); - rom_reserve(0); - - if (rom_get_last() != BUILD_ROM_START) - // VGA rom found - VgaROM = (void*)BUILD_ROM_START; -} - -void -s3_resume_vga(void) -{ - if (!S3ResumeVga) - return; - if (!VgaROM || ! is_valid_rom(VgaROM)) - return; - callrom(VgaROM, 0); -} diff --git a/payloads/external/SeaBIOS/src/output.c b/payloads/external/SeaBIOS/src/output.c deleted file mode 100644 index 0184444c..00000000 --- a/payloads/external/SeaBIOS/src/output.c +++ /dev/null @@ -1,592 +0,0 @@ -// Raw screen writing and debug output code. -// -// Copyright (C) 2008-2013 Kevin O'Connor <kevin@koconnor.net> -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include <stdarg.h> // va_list - -#include "farptr.h" // GET_VAR -#include "bregs.h" // struct bregs -#include "config.h" // CONFIG_* -#include "biosvar.h" // GET_GLOBAL -#include "hw/pci.h" // pci_bdf_to_bus -#include "hw/pcidevice.h" // pci_device -#include "hw/serialio.h" // serial_debug_putc -#include "malloc.h" // malloc_tmp -#include "output.h" // dprintf -#include "stacks.h" // call16_int -#include "string.h" // memset -#include "util.h" // ScreenAndDebug - -struct putcinfo { - void (*func)(struct putcinfo *info, char c); -}; - - -/**************************************************************** - * Debug output - ****************************************************************/ - -void -debug_banner(void) -{ - dprintf(1, "SeaBIOS (version %s)\n", VERSION); - dprintf(1, "BUILD: %s\n", BUILDINFO); -} - -// Write a character to debug port(s). -static void -debug_putc(struct putcinfo *action, char c) -{ - if (! CONFIG_DEBUG_LEVEL) - return; - qemu_debug_putc(c); - if (!MODESEGMENT) - coreboot_debug_putc(c); - serial_debug_putc(c); -} - -// Flush any pending output to debug port(s). -static void -debug_flush(void) -{ - serial_debug_flush(); -} - -// In segmented mode just need a dummy variable (debug_putc is always -// used anyway), and in 32bit flat mode need a pointer to the 32bit -// instance of debug_putc(). -#if MODE16 -static struct putcinfo debuginfo VAR16; -#elif MODESEGMENT -static struct putcinfo debuginfo VAR32SEG; -#else -static struct putcinfo debuginfo = { debug_putc }; -#endif - - -/**************************************************************** - * Screen writing - ****************************************************************/ - -// Show a character on the screen. -static void -screenc(char c) -{ - if (!MODESEGMENT && GET_IVT(0x10).segoff == FUNC16(entry_10).segoff) - // No need to thunk to 16bit mode if vgabios is not present - return; - struct bregs br; - memset(&br, 0, sizeof(br)); - br.flags = F_IF; - br.ah = 0x0e; - br.al = c; - br.bl = 0x07; - call16_int(0x10, &br); -} - -// Handle a character from a printf request. -static void -screen_putc(struct putcinfo *action, char c) -{ - if (ScreenAndDebug) - debug_putc(&debuginfo, c); - if (c == '\n') - screenc('\r'); - screenc(c); -} - -static struct putcinfo screeninfo = { screen_putc }; - - -/**************************************************************** - * Xprintf code - ****************************************************************/ - -// Output a character. -static void -putc(struct putcinfo *action, char c) -{ - if (MODESEGMENT) { - // Only debugging output supported in segmented mode. - debug_putc(action, c); - return; - } - - void (*func)(struct putcinfo *info, char c) = GET_GLOBAL(action->func); - func(action, c); -} - -// Ouptut a string. -static void -puts(struct putcinfo *action, const char *s) -{ - if (!MODESEGMENT && !s) - s = "(NULL)"; - for (; *s; s++) - putc(action, *s); -} - -// Output a string that is in the CS segment. -static void -puts_cs(struct putcinfo *action, const char *s) -{ - char *vs = (char*)s; - for (;; vs++) { - char c = GET_GLOBAL(*vs); - if (!c) - break; - putc(action, c); - } -} - -// Output an unsigned integer. -static void -putuint(struct putcinfo *action, u32 val) -{ - char buf[12]; - char *d = &buf[sizeof(buf) - 1]; - *d-- = '\0'; - for (;;) { - *d = (val % 10) + '0'; - val /= 10; - if (!val) - break; - d--; - } - puts(action, d); -} - -// Output a single digit hex character. -static inline void -putsinglehex(struct putcinfo *action, u32 val, int uc) -{ - if (val <= 9) - val = '0' + val; - else if (uc) - val = 'A' + val - 10; - else - val = 'a' + val - 10; - putc(action, val); -} - -// Output an integer in hexadecimal with a specified width. -static void -puthex(struct putcinfo *action, u32 val, int width, int uc) -{ - switch (width) { - default: putsinglehex(action, (val >> 28) & 0xf, uc); - case 7: putsinglehex(action, (val >> 24) & 0xf, uc); - case 6: putsinglehex(action, (val >> 20) & 0xf, uc); - case 5: putsinglehex(action, (val >> 16) & 0xf, uc); - case 4: putsinglehex(action, (val >> 12) & 0xf, uc); - case 3: putsinglehex(action, (val >> 8) & 0xf, uc); - case 2: putsinglehex(action, (val >> 4) & 0xf, uc); - case 1: putsinglehex(action, (val >> 0) & 0xf, uc); - } -} - -// Output an integer in hexadecimal with a minimum width. -static void -putprettyhex(struct putcinfo *action, u32 val, int width, char padchar, int uc) -{ - u32 tmp = val; - int count = 1; - while (tmp >>= 4) - count++; - width -= count; - while (width-- > 0) - putc(action, padchar); - puthex(action, val, count, uc); -} - -// Output 'struct pci_device' BDF as %02x:%02x.%x -static void -put_pci_device(struct putcinfo *action, struct pci_device *pci) -{ - puthex(action, pci_bdf_to_bus(pci->bdf), 2, 0); - putc(action, ':'); - puthex(action, pci_bdf_to_dev(pci->bdf), 2, 0); - putc(action, '.'); - puthex(action, pci_bdf_to_fn(pci->bdf), 1, 0); -} - -static inline int -isdigit(u8 c) -{ - return ((u8)(c - '0')) < 10; -} - -static void -bvprintf(struct putcinfo *action, const char *fmt, va_list args) -{ - const char *s = fmt; - int uc; - for (;; s++) { - char c = GET_GLOBAL(*(u8*)s); - if (!c) - break; - if (c != '%') { - putc(action, c); - continue; - } - const char *n = s+1; - int field_width = 0; - char padchar = ' '; - u8 is64 = 0; - for (;;) { - c = GET_GLOBAL(*(u8*)n); - if (!isdigit(c)) - break; - if (!field_width && (c == '0')) - padchar = '0'; - else - field_width = field_width * 10 + c - '0'; - n++; - } - if (c == 'l') { - // Ignore long format indicator - n++; - c = GET_GLOBAL(*(u8*)n); - } - if (c == 'l') { - is64 = 1; - n++; - c = GET_GLOBAL(*(u8*)n); - } - s32 val; - const char *sarg; - switch (c) { - case '%': - putc(action, '%'); - break; - case 'd': - val = va_arg(args, s32); - if (is64) - va_arg(args, s32); - if (val < 0) { - putc(action, '-'); - val = -val; - } - putuint(action, val); - break; - case 'u': - val = va_arg(args, s32); - if (is64) - va_arg(args, s32); - putuint(action, val); - break; - case 'p': - val = va_arg(args, s32); - if (!MODESEGMENT && GET_GLOBAL(*(u8*)(n+1)) == 'P') { - // %pP is 'struct pci_device' printer - put_pci_device(action, (void*)val); - n++; - break; - } - putc(action, '0'); - putc(action, 'x'); - puthex(action, val, 8, 0); - break; - case 'X': - case 'x': - uc = (c == 'X'); - val = va_arg(args, s32); - if (is64) { - u32 upper = va_arg(args, s32); - if (upper) { - putprettyhex(action, upper, field_width - 8, padchar, uc); - puthex(action, val, 8, uc); - break; - } - } - putprettyhex(action, val, field_width, padchar, uc); - break; - case 'c': - val = va_arg(args, int); - putc(action, val); - break; - case '.': - // Hack to support "%.s" - meaning string on stack. - if (GET_GLOBAL(*(u8*)(n+1)) != 's') - break; - n++; - sarg = va_arg(args, const char *); - puts(action, sarg); - break; - case 's': - sarg = va_arg(args, const char *); - puts_cs(action, sarg); - break; - default: - putc(action, '%'); - n = s; - } - s = n; - } -} - -void -panic(const char *fmt, ...) -{ - if (CONFIG_DEBUG_LEVEL) { - va_list args; - va_start(args, fmt); - bvprintf(&debuginfo, fmt, args); - va_end(args); - debug_flush(); - } - - // XXX - use PANIC PORT. - irq_disable(); - for (;;) - hlt(); -} - -void -__dprintf(const char *fmt, ...) -{ - if (!MODESEGMENT && CONFIG_THREADS && CONFIG_DEBUG_LEVEL >= DEBUG_thread - && *fmt != '\\' && *fmt != '/') { - struct thread_info *cur = getCurThread(); - if (cur != &MainThread) { - // Show "thread id" for this debug message. - debug_putc(&debuginfo, '|'); - puthex(&debuginfo, (u32)cur, 8, 0); - debug_putc(&debuginfo, '|'); - debug_putc(&debuginfo, ' '); - } - } - - va_list args; - va_start(args, fmt); - bvprintf(&debuginfo, fmt, args); - va_end(args); - debug_flush(); -} - -void -printf(const char *fmt, ...) -{ - ASSERT32FLAT(); - va_list args; - va_start(args, fmt); - bvprintf(&screeninfo, fmt, args); - va_end(args); - if (ScreenAndDebug) - debug_flush(); -} - - -/**************************************************************** - * snprintf - ****************************************************************/ - -struct snprintfinfo { - struct putcinfo info; - char *str, *end; -}; - -static void -putc_str(struct putcinfo *info, char c) -{ - struct snprintfinfo *sinfo = container_of(info, struct snprintfinfo, info); - if (sinfo->str >= sinfo->end) - return; - *sinfo->str = c; - sinfo->str++; -} - -// Build a formatted string. Note, this function returns the actual -// number of bytes used (not including null) even in the overflow -// case. -int -snprintf(char *str, size_t size, const char *fmt, ...) -{ - ASSERT32FLAT(); - if (!size) - return 0; - struct snprintfinfo sinfo = { { putc_str }, str, str + size }; - va_list args; - va_start(args, fmt); - bvprintf(&sinfo.info, fmt, args); - va_end(args); - char *end = sinfo.str; - if (end >= sinfo.end) - end = sinfo.end - 1; - *end = '\0'; - return end - str; -} - -// Build a formatted string - malloc'ing the memory. -char * -znprintf(size_t size, const char *fmt, ...) -{ - ASSERT32FLAT(); - if (!size) - return NULL; - char *str = malloc_tmp(size); - if (!str) { - warn_noalloc(); - return NULL; - } - struct snprintfinfo sinfo = { { putc_str }, str, str + size }; - va_list args; - va_start(args, fmt); - bvprintf(&sinfo.info, fmt, args); - va_end(args); - char *end = sinfo.str; - if (end >= sinfo.end) - end = sinfo.end - 1; - *end = '\0'; - return str; -} - - -/**************************************************************** - * Misc helpers - ****************************************************************/ - -void -hexdump(const void *d, int len) -{ - int count=0; - while (len > 0) { - if (count % 8 == 0) { - putc(&debuginfo, '\n'); - puthex(&debuginfo, count*4, 8, 0); - putc(&debuginfo, ':'); - } else { - putc(&debuginfo, ' '); - } - puthex(&debuginfo, *(u32*)d, 8, 0); - count++; - len-=4; - d+=4; - } - putc(&debuginfo, '\n'); - debug_flush(); -} - -static void -dump_regs(struct bregs *regs) -{ - if (!regs) { - dprintf(1, " NULL\n"); - return; - } - dprintf(1, " a=%08x b=%08x c=%08x d=%08x ds=%04x es=%04x ss=%04x\n" - , regs->eax, regs->ebx, regs->ecx, regs->edx - , regs->ds, regs->es, GET_SEG(SS)); - dprintf(1, " si=%08x di=%08x bp=%08x sp=%08x cs=%04x ip=%04x f=%04x\n" - , regs->esi, regs->edi, regs->ebp, (u32)®s[1] - , regs->code.seg, regs->code.offset, regs->flags); -} - -// Report entry to an Interrupt Service Routine (ISR). -void -__debug_isr(const char *fname) -{ - puts_cs(&debuginfo, fname); - putc(&debuginfo, '\n'); - debug_flush(); -} - -// Function called on handler startup. -void -__debug_enter(struct bregs *regs, const char *fname) -{ - dprintf(1, "enter %s:\n", fname); - dump_regs(regs); -} - -// Send debugging output info. -void -__debug_stub(struct bregs *regs, int lineno, const char *fname) -{ - dprintf(1, "stub %s:%d:\n", fname, lineno); - dump_regs(regs); -} - -// Report on an invalid parameter. -void -__warn_invalid(struct bregs *regs, int lineno, const char *fname) -{ - if (CONFIG_DEBUG_LEVEL >= DEBUG_invalid) { - dprintf(1, "invalid %s:%d:\n", fname, lineno); - dump_regs(regs); - } -} - -// Report on an unimplemented feature. -void -__warn_unimplemented(struct bregs *regs, int lineno, const char *fname) -{ - if (CONFIG_DEBUG_LEVEL >= DEBUG_unimplemented) { - dprintf(1, "unimplemented %s:%d:\n", fname, lineno); - dump_regs(regs); - } -} - -// Report a detected internal inconsistency. -void -__warn_internalerror(int lineno, const char *fname) -{ - dprintf(1, "WARNING - internal error detected at %s:%d!\n" - , fname, lineno); -} - -// Report on an allocation failure. -void -__warn_noalloc(int lineno, const char *fname) -{ - dprintf(1, "WARNING - Unable to allocate resource at %s:%d!\n" - , fname, lineno); -} - -// Report on a timeout exceeded. -void -__warn_timeout(int lineno, const char *fname) -{ - dprintf(1, "WARNING - Timeout at %s:%d!\n", fname, lineno); -} - -// Report a handler reporting an invalid parameter to the caller. -void -__set_invalid(struct bregs *regs, int lineno, const char *fname) -{ - __warn_invalid(regs, lineno, fname); - set_invalid_silent(regs); -} - -// Report a call of an unimplemented function. -void -__set_unimplemented(struct bregs *regs, int lineno, const char *fname) -{ - __warn_unimplemented(regs, lineno, fname); - set_invalid_silent(regs); -} - -// Report a handler reporting an invalid parameter code to the -// caller. Note, the lineno and return code are encoded in the same -// parameter as gcc does a better job of scheduling function calls -// when there are 3 or less parameters. -void -__set_code_invalid(struct bregs *regs, u32 linecode, const char *fname) -{ - u8 code = linecode; - u32 lineno = linecode >> 8; - __warn_invalid(regs, lineno, fname); - set_code_invalid_silent(regs, code); -} - -// Report a call of an unimplemented function. -void -__set_code_unimplemented(struct bregs *regs, u32 linecode, const char *fname) -{ - u8 code = linecode; - u32 lineno = linecode >> 8; - __warn_unimplemented(regs, lineno, fname); - set_code_invalid_silent(regs, code); -} diff --git a/payloads/external/SeaBIOS/src/output.h b/payloads/external/SeaBIOS/src/output.h deleted file mode 100644 index 14288cf5..00000000 --- a/payloads/external/SeaBIOS/src/output.h +++ /dev/null @@ -1,68 +0,0 @@ -#ifndef __OUTPUT_H -#define __OUTPUT_H - -#include "config.h" // CONFIG_DEBUG_LEVEL -#include "types.h" // u32 - -// output.c -void debug_banner(void); -void panic(const char *fmt, ...) - __attribute__ ((format (printf, 1, 2))) __noreturn; -void printf(const char *fmt, ...) - __attribute__ ((format (printf, 1, 2))); -int snprintf(char *str, size_t size, const char *fmt, ...) - __attribute__ ((format (printf, 3, 4))); -char * znprintf(size_t size, const char *fmt, ...) - __attribute__ ((format (printf, 2, 3))); -void __dprintf(const char *fmt, ...) - __attribute__ ((format (printf, 1, 2))); -struct bregs; -void __debug_enter(struct bregs *regs, const char *fname); -void __debug_isr(const char *fname); -void __debug_stub(struct bregs *regs, int lineno, const char *fname); -void __warn_invalid(struct bregs *regs, int lineno, const char *fname); -void __warn_unimplemented(struct bregs *regs, int lineno, const char *fname); -void __warn_internalerror(int lineno, const char *fname); -void __warn_noalloc(int lineno, const char *fname); -void __warn_timeout(int lineno, const char *fname); -void __set_invalid(struct bregs *regs, int lineno, const char *fname); -void __set_unimplemented(struct bregs *regs, int lineno, const char *fname); -void __set_code_invalid(struct bregs *regs, u32 linecode, const char *fname); -void __set_code_unimplemented(struct bregs *regs, u32 linecode - , const char *fname); -void hexdump(const void *d, int len); - -#define dprintf(lvl, fmt, args...) do { \ - if (CONFIG_DEBUG_LEVEL && (lvl) <= CONFIG_DEBUG_LEVEL) \ - __dprintf((fmt) , ##args ); \ - } while (0) -#define debug_enter(regs, lvl) do { \ - if ((lvl) && (lvl) <= CONFIG_DEBUG_LEVEL) \ - __debug_enter((regs), __func__); \ - } while (0) -#define debug_isr(lvl) do { \ - if ((lvl) && (lvl) <= CONFIG_DEBUG_LEVEL) \ - __debug_isr(__func__); \ - } while (0) -#define debug_stub(regs) \ - __debug_stub((regs), __LINE__, __func__) -#define warn_invalid(regs) \ - __warn_invalid((regs), __LINE__, __func__) -#define warn_unimplemented(regs) \ - __warn_unimplemented((regs), __LINE__, __func__) -#define warn_internalerror() \ - __warn_internalerror(__LINE__, __func__) -#define warn_noalloc() \ - __warn_noalloc(__LINE__, __func__) -#define warn_timeout() \ - __warn_timeout(__LINE__, __func__) -#define set_invalid(regs) \ - __set_invalid((regs), __LINE__, __func__) -#define set_code_invalid(regs, code) \ - __set_code_invalid((regs), (code) | (__LINE__ << 8), __func__) -#define set_unimplemented(regs) \ - __set_unimplemented((regs), __LINE__, __func__) -#define set_code_unimplemented(regs, code) \ - __set_code_unimplemented((regs), (code) | (__LINE__ << 8), __func__) - -#endif // output.h diff --git a/payloads/external/SeaBIOS/src/pcibios.c b/payloads/external/SeaBIOS/src/pcibios.c deleted file mode 100644 index 81735e3d..00000000 --- a/payloads/external/SeaBIOS/src/pcibios.c +++ /dev/null @@ -1,241 +0,0 @@ -// PCI BIOS (int 1a/b1) calls -// -// Copyright (C) 2008 Kevin O'Connor <kevin@koconnor.net> -// Copyright (C) 2002 MandrakeSoft S.A. -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "biosvar.h" // GET_GLOBAL -#include "bregs.h" // struct bregs -#include "hw/pci.h" // pci_config_readl -#include "hw/pcidevice.h" // MaxPCIBus -#include "hw/pci_regs.h" // PCI_VENDOR_ID -#include "output.h" // dprintf -#include "std/pirtable.h" // struct pir_header -#include "string.h" // checksum -#include "util.h" // handle_1ab1 - -// romlayout.S -extern void entry_bios32(void); -extern void entry_pcibios32(void); - -#define RET_FUNC_NOT_SUPPORTED 0x81 -#define RET_BAD_VENDOR_ID 0x83 -#define RET_DEVICE_NOT_FOUND 0x86 -#define RET_BUFFER_TOO_SMALL 0x89 - -// installation check -static void -handle_1ab101(struct bregs *regs) -{ - regs->al = 0x01; // Flags - "Config Mechanism #1" supported. - regs->bx = 0x0210; // PCI version 2.10 - regs->cl = GET_GLOBAL(MaxPCIBus); - regs->edx = 0x20494350; // "PCI " - regs->edi = (u32)entry_pcibios32 + BUILD_BIOS_ADDR; - set_code_success(regs); -} - -// find pci device -static void -handle_1ab102(struct bregs *regs) -{ - u32 id = (regs->cx << 16) | regs->dx; - int count = regs->si; - int bus = -1; - while (bus < GET_GLOBAL(MaxPCIBus)) { - bus++; - int bdf; - foreachbdf(bdf, bus) { - u32 v = pci_config_readl(bdf, PCI_VENDOR_ID); - if (v != id) - continue; - if (count--) - continue; - regs->bx = bdf; - set_code_success(regs); - return; - } - } - set_code_invalid(regs, RET_DEVICE_NOT_FOUND); -} - -// find class code -static void -handle_1ab103(struct bregs *regs) -{ - int count = regs->si; - u32 classprog = regs->ecx; - int bus = -1; - while (bus < GET_GLOBAL(MaxPCIBus)) { - bus++; - int bdf; - foreachbdf(bdf, bus) { - u32 v = pci_config_readl(bdf, PCI_CLASS_REVISION); - if ((v>>8) != classprog) - continue; - if (count--) - continue; - regs->bx = bdf; - set_code_success(regs); - return; - } - } - set_code_invalid(regs, RET_DEVICE_NOT_FOUND); -} - -// read configuration byte -static void -handle_1ab108(struct bregs *regs) -{ - regs->cl = pci_config_readb(regs->bx, regs->di); - set_code_success(regs); -} - -// read configuration word -static void -handle_1ab109(struct bregs *regs) -{ - regs->cx = pci_config_readw(regs->bx, regs->di); - set_code_success(regs); -} - -// read configuration dword -static void -handle_1ab10a(struct bregs *regs) -{ - regs->ecx = pci_config_readl(regs->bx, regs->di); - set_code_success(regs); -} - -// write configuration byte -static void -handle_1ab10b(struct bregs *regs) -{ - pci_config_writeb(regs->bx, regs->di, regs->cl); - set_code_success(regs); -} - -// write configuration word -static void -handle_1ab10c(struct bregs *regs) -{ - pci_config_writew(regs->bx, regs->di, regs->cx); - set_code_success(regs); -} - -// write configuration dword -static void -handle_1ab10d(struct bregs *regs) -{ - pci_config_writel(regs->bx, regs->di, regs->ecx); - set_code_success(regs); -} - -// get irq routing options -static void -handle_1ab10e(struct bregs *regs) -{ - struct pir_header *pirtable_gf = GET_GLOBAL(PirAddr); - if (! pirtable_gf) { - set_code_invalid(regs, RET_FUNC_NOT_SUPPORTED); - return; - } - struct pir_header *pirtable_g = GLOBALFLAT2GLOBAL(pirtable_gf); - - struct param_s { - u16 size; - u16 buf_off; - u16 buf_seg; - } *param_far = (void*)(regs->di+0); - - // Validate and update size. - u16 bufsize = GET_FARVAR(regs->es, param_far->size); - u16 pirsize = GET_GLOBAL(pirtable_g->size) - sizeof(struct pir_header); - SET_FARVAR(regs->es, param_far->size, pirsize); - if (bufsize < pirsize) { - set_code_invalid(regs, RET_BUFFER_TOO_SMALL); - return; - } - - // Get dest buffer. - void *buf_far = (void*)(GET_FARVAR(regs->es, param_far->buf_off)+0); - u16 buf_seg = GET_FARVAR(regs->es, param_far->buf_seg); - - // Memcpy pir table slots to dest buffer. - memcpy_far(buf_seg, buf_far - , get_global_seg() - , (void*)(pirtable_g->slots) + get_global_offset() - , pirsize); - - // XXX - bochs bios sets bx to (1 << 9) | (1 << 11) - regs->bx = GET_GLOBAL(pirtable_g->exclusive_irqs); - set_code_success(regs); -} - -static void -handle_1ab1XX(struct bregs *regs) -{ - set_code_unimplemented(regs, RET_FUNC_NOT_SUPPORTED); -} - -void -handle_1ab1(struct bregs *regs) -{ - //debug_stub(regs); - - if (! CONFIG_PCIBIOS) { - set_invalid(regs); - return; - } - - switch (regs->al) { - case 0x01: handle_1ab101(regs); break; - case 0x02: handle_1ab102(regs); break; - case 0x03: handle_1ab103(regs); break; - case 0x08: handle_1ab108(regs); break; - case 0x09: handle_1ab109(regs); break; - case 0x0a: handle_1ab10a(regs); break; - case 0x0b: handle_1ab10b(regs); break; - case 0x0c: handle_1ab10c(regs); break; - case 0x0d: handle_1ab10d(regs); break; - case 0x0e: handle_1ab10e(regs); break; - default: handle_1ab1XX(regs); break; - } -} - -// Entry point for pci bios functions. -void VISIBLE16 VISIBLE32SEG -handle_pcibios(struct bregs *regs) -{ - debug_enter(regs, DEBUG_HDL_pcibios); - handle_1ab1(regs); -} - - -/**************************************************************** - * 32bit interface - ****************************************************************/ - -struct bios32_s { - u32 signature; - u32 entry; - u8 version; - u8 length; - u8 checksum; - u8 reserved[5]; -} PACKED; - -struct bios32_s BIOS32HEADER __aligned(16) VARFSEG = { - .signature = 0x5f32335f, // _32_ - .length = sizeof(BIOS32HEADER) / 16, -}; - -void -bios32_init(void) -{ - dprintf(3, "init bios32\n"); - - BIOS32HEADER.entry = (u32)entry_bios32; - BIOS32HEADER.checksum -= checksum(&BIOS32HEADER, sizeof(BIOS32HEADER)); -} diff --git a/payloads/external/SeaBIOS/src/pmm.c b/payloads/external/SeaBIOS/src/pmm.c deleted file mode 100644 index 28b253b2..00000000 --- a/payloads/external/SeaBIOS/src/pmm.c +++ /dev/null @@ -1,176 +0,0 @@ -// Post memory manager (PMM) calls -// -// Copyright (C) 2009-2013 Kevin O'Connor <kevin@koconnor.net> -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "biosvar.h" // FUNC16 -#include "config.h" // CONFIG_* -#include "malloc.h" // _malloc -#include "output.h" // dprintf -#include "e820map.h" // struct e820entry -#include "std/pmm.h" // PMM_SIGNATURE -#include "string.h" // checksum -#include "util.h" // pmm_init -#include "x86.h" // __ffs - -extern struct pmmheader PMMHEADER; - -#if CONFIG_PMM -struct pmmheader PMMHEADER __aligned(16) VARFSEG = { - .signature = PMM_SIGNATURE, - .version = 0x01, - .length = sizeof(PMMHEADER), -}; -#endif - -// PMM - allocate -static u32 -handle_pmm00(u16 *args) -{ - u32 length = *(u32*)&args[1], handle = *(u32*)&args[3]; - u16 flags = args[5]; - dprintf(3, "pmm00: length=%x handle=%x flags=%x\n" - , length, handle, flags); - struct zone_s *lowzone = &ZoneTmpLow, *highzone = &ZoneTmpHigh; - if (flags & 8) { - // Permanent memory request. - lowzone = &ZoneLow; - highzone = &ZoneHigh; - } - if (!length) { - // Memory size request - switch (flags & 3) { - default: - case 0: - return 0; - case 1: - return malloc_getspace(lowzone); - case 2: - return malloc_getspace(highzone); - case 3: { - u32 spacelow = malloc_getspace(lowzone); - u32 spacehigh = malloc_getspace(highzone); - if (spacelow > spacehigh) - return spacelow; - return spacehigh; - } - } - } - u32 size = length * 16; - if ((s32)size <= 0) - return 0; - u32 align = MALLOC_MIN_ALIGN; - if (flags & 4) { - align = 1<<__ffs(size); - if (align < MALLOC_MIN_ALIGN) - align = MALLOC_MIN_ALIGN; - } - u32 data; - switch (flags & 3) { - default: - case 0: - return 0; - case 1: - data = malloc_palloc(lowzone, size, align); - break; - case 2: - data = malloc_palloc(highzone, size, align); - if (!data && (flags & 8)) { - /* - * We are out of meory. So go allocate from the (big) - * ZoneTmpHigh instead and reserve the block in the e820 - * map so the OS will not override it. That way we can - * handle big permanent allocations without needing a big - * ZoneHigh. - */ - data = malloc_palloc(&ZoneTmpHigh, size, align); - if (data) - e820_add(data, size, E820_RESERVED); - } - break; - case 3: { - data = malloc_palloc(lowzone, size, align); - if (!data) - data = malloc_palloc(highzone, size, align); - } - } - if (data && handle != MALLOC_DEFAULT_HANDLE) - malloc_sethandle(data, handle); - return data; -} - -// PMM - find -static u32 -handle_pmm01(u16 *args) -{ - u32 handle = *(u32*)&args[1]; - dprintf(3, "pmm01: handle=%x\n", handle); - if (handle == MALLOC_DEFAULT_HANDLE) - return 0; - return malloc_findhandle(handle); -} - -// PMM - deallocate -static u32 -handle_pmm02(u16 *args) -{ - u32 buffer = *(u32*)&args[1]; - dprintf(3, "pmm02: buffer=%x\n", buffer); - int ret = malloc_pfree(buffer); - if (ret) - // Error - return 1; - return 0; -} - -static u32 -handle_pmmXX(u16 *args) -{ - return PMM_FUNCTION_NOT_SUPPORTED; -} - -u32 VISIBLE32INIT -handle_pmm(u16 *args) -{ - ASSERT32FLAT(); - if (! CONFIG_PMM) - return PMM_FUNCTION_NOT_SUPPORTED; - - u16 arg1 = args[0]; - dprintf(DEBUG_HDL_pmm, "pmm call arg1=%x\n", arg1); - - u32 ret; - switch (arg1) { - case 0x00: ret = handle_pmm00(args); break; - case 0x01: ret = handle_pmm01(args); break; - case 0x02: ret = handle_pmm02(args); break; - default: ret = handle_pmmXX(args); break; - } - - return ret; -} - -void -pmm_init(void) -{ - if (! CONFIG_PMM) - return; - - dprintf(3, "init PMM\n"); - - PMMHEADER.entry = FUNC16(entry_pmm); - PMMHEADER.checksum -= checksum(&PMMHEADER, sizeof(PMMHEADER)); -} - -void -pmm_prepboot(void) -{ - if (! CONFIG_PMM) - return; - - dprintf(3, "finalize PMM\n"); - - PMMHEADER.signature = 0; - PMMHEADER.entry.segoff = 0; -} diff --git a/payloads/external/SeaBIOS/src/pnpbios.c b/payloads/external/SeaBIOS/src/pnpbios.c deleted file mode 100644 index 95ce21f8..00000000 --- a/payloads/external/SeaBIOS/src/pnpbios.c +++ /dev/null @@ -1,88 +0,0 @@ -// PNP BIOS calls -// -// Copyright (C) 2008 Kevin O'Connor <kevin@koconnor.net> -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "config.h" // BUILD_BIOS_ADDR -#include "farptr.h" // SET_FARVAR -#include "output.h" // dprintf -#include "std/pnpbios.h" // PNP_SIGNATURE -#include "string.h" // checksum -#include "util.h" // pnp_init - -extern struct pnpheader PNPHEADER; -extern char pnp_string[]; - -#if CONFIG_PNPBIOS -struct pnpheader PNPHEADER __aligned(16) VARFSEG = { - .signature = PNP_SIGNATURE, - .version = 0x10, - .length = sizeof(PNPHEADER), - .real_cs = SEG_BIOS, - .prot_base = BUILD_BIOS_ADDR, - .real_ds = SEG_BIOS, - .prot_database = BUILD_BIOS_ADDR, -}; -#else -// We need a copy of this string in the 0xf000 segment, but we are not -// actually a PnP BIOS, so make sure it is *not* aligned, so OSes will -// not see it if they scan. -char pnp_string[] __aligned(2) VARFSEG = " $PnP"; -#endif - -// BBS - Get Version and Installation Check -static u16 -handle_pnp60(u16 *args) -{ - u16 version_ptr = args[1]; - u16 version_seg = args[2]; - SET_FARVAR(version_seg, *(u16*)(version_ptr+0), 0x0101); - return 0; -} - -static u16 -handle_pnpXX(u16 *args) -{ - return FUNCTION_NOT_SUPPORTED; -} - -u16 VISIBLE16 -handle_pnp(u16 *args) -{ - if (! CONFIG_PNPBIOS) - return FUNCTION_NOT_SUPPORTED; - - u16 arg1 = args[0]; - dprintf(DEBUG_HDL_pnp, "pnp call arg1=%x\n", arg1); - - switch (arg1) { - case 0x60: return handle_pnp60(args); - default: return handle_pnpXX(args); - } -} - -u16 -get_pnp_offset(void) -{ - if (! CONFIG_PNPBIOS) - return (u32)pnp_string + 1 - BUILD_BIOS_ADDR; - return (u32)&PNPHEADER - BUILD_BIOS_ADDR; -} - -// romlayout.S -extern void entry_pnp_real(void); -extern void entry_pnp_prot(void); - -void -pnp_init(void) -{ - if (! CONFIG_PNPBIOS) - return; - - dprintf(3, "init PNPBIOS table\n"); - - PNPHEADER.real_ip = (u32)entry_pnp_real - BUILD_BIOS_ADDR; - PNPHEADER.prot_ip = (u32)entry_pnp_prot - BUILD_BIOS_ADDR; - PNPHEADER.checksum -= checksum(&PNPHEADER, sizeof(PNPHEADER)); -} diff --git a/payloads/external/SeaBIOS/src/post.c b/payloads/external/SeaBIOS/src/post.c deleted file mode 100644 index f93106a1..00000000 --- a/payloads/external/SeaBIOS/src/post.c +++ /dev/null @@ -1,337 +0,0 @@ -// 32bit code to Power On Self Test (POST) a machine. -// -// Copyright (C) 2008-2013 Kevin O'Connor <kevin@koconnor.net> -// Copyright (C) 2002 MandrakeSoft S.A. -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "biosvar.h" // SET_BDA -#include "block.h" // block_setup -#include "bregs.h" // struct bregs -#include "config.h" // CONFIG_* -#include "e820map.h" // e820_add -#include "fw/paravirt.h" // qemu_cfg_preinit -#include "fw/xen.h" // xen_preinit -#include "hw/pic.h" // pic_setup -#include "hw/ps2port.h" // ps2port_setup -#include "hw/rtc.h" // rtc_write -#include "hw/serialio.h" // serial_debug_preinit -#include "hw/usb.h" // usb_setup -#include "malloc.h" // malloc_init -#include "memmap.h" // SYMBOL -#include "output.h" // dprintf -#include "string.h" // memset -#include "util.h" // kbd_init -#include "tcgbios.h" // tpm_* - - -/**************************************************************** - * BIOS initialization and hardware setup - ****************************************************************/ - -static void -ivt_init(void) -{ - dprintf(3, "init ivt\n"); - - // Initialize all vectors to the default handler. - int i; - for (i=0; i<256; i++) - SET_IVT(i, FUNC16(entry_iret_official)); - - // Initialize all hw vectors to a default hw handler. - for (i=BIOS_HWIRQ0_VECTOR; i<BIOS_HWIRQ0_VECTOR+8; i++) - SET_IVT(i, FUNC16(entry_hwpic1)); - for (i=BIOS_HWIRQ8_VECTOR; i<BIOS_HWIRQ8_VECTOR+8; i++) - SET_IVT(i, FUNC16(entry_hwpic2)); - - // Initialize software handlers. - SET_IVT(0x02, FUNC16(entry_02)); - SET_IVT(0x05, FUNC16(entry_05)); - SET_IVT(0x10, FUNC16(entry_10)); - SET_IVT(0x11, FUNC16(entry_11)); - SET_IVT(0x12, FUNC16(entry_12)); - SET_IVT(0x13, FUNC16(entry_13_official)); - SET_IVT(0x14, FUNC16(entry_14)); - SET_IVT(0x15, FUNC16(entry_15_official)); - SET_IVT(0x16, FUNC16(entry_16)); - SET_IVT(0x17, FUNC16(entry_17)); - SET_IVT(0x18, FUNC16(entry_18)); - SET_IVT(0x19, FUNC16(entry_19_official)); - SET_IVT(0x1a, FUNC16(entry_1a_official)); - SET_IVT(0x40, FUNC16(entry_40)); - - // INT 60h-66h reserved for user interrupt - for (i=0x60; i<=0x66; i++) - SET_IVT(i, SEGOFF(0, 0)); - - // set vector 0x79 to zero - // this is used by 'gardian angel' protection system - SET_IVT(0x79, SEGOFF(0, 0)); -} - -static void -bda_init(void) -{ - dprintf(3, "init bda\n"); - - struct bios_data_area_s *bda = MAKE_FLATPTR(SEG_BDA, 0); - memset(bda, 0, sizeof(*bda)); - - int esize = EBDA_SIZE_START; - u16 ebda_seg = EBDA_SEGMENT_START; - if (!CONFIG_MALLOC_UPPERMEMORY) - ebda_seg = FLATPTR_TO_SEG(ALIGN_DOWN(SYMBOL(final_varlow_start), 1024) - - EBDA_SIZE_START*1024); - SET_BDA(ebda_seg, ebda_seg); - - SET_BDA(mem_size_kb, ebda_seg / (1024/16)); - - // Init ebda - struct extended_bios_data_area_s *ebda = get_ebda_ptr(); - memset(ebda, 0, sizeof(*ebda)); - ebda->size = esize; - - e820_add((u32)ebda, BUILD_LOWRAM_END-(u32)ebda, E820_RESERVED); - - // Init extra stack - StackPos = &ExtraStack[BUILD_EXTRA_STACK_SIZE] - SYMBOL(zonelow_base); -} - -void -interface_init(void) -{ - // Running at new code address - do code relocation fixups - malloc_init(); - - // Setup romfile items. - qemu_cfg_init(); - coreboot_cbfs_init(); - multiboot_init(); - - // Setup ivt/bda/ebda - ivt_init(); - bda_init(); - - // Other interfaces - boot_init(); - bios32_init(); - pmm_init(); - pnp_init(); - kbd_init(); - mouse_init(); -} - -// Initialize hardware devices -void -device_hardware_setup(void) -{ - usb_setup(); - ps2port_setup(); - block_setup(); - lpt_setup(); - serial_setup(); - cbfs_payload_setup(); -} - -static void -platform_hardware_setup(void) -{ - // Make sure legacy DMA isn't running. - dma_setup(); - - // Init base pc hardware. - pic_setup(); - thread_setup(); - mathcp_setup(); - - // Platform specific setup - qemu_platform_setup(); - coreboot_platform_setup(); - - // Setup timers and periodic clock interrupt - timer_setup(); - clock_setup(); - - // Initialize TPM - tpm_setup(); -} - -void -prepareboot(void) -{ - // Change TPM phys. presence state befor leaving BIOS - tpm_prepboot(); - - // Run BCVs - bcv_prepboot(); - - // Finalize data structures before boot - cdrom_prepboot(); - pmm_prepboot(); - malloc_prepboot(); - e820_prepboot(); - - HaveRunPost = 2; - - // Setup bios checksum. - BiosChecksum -= checksum((u8*)BUILD_BIOS_ADDR, BUILD_BIOS_SIZE); -} - -// Begin the boot process by invoking an int0x19 in 16bit mode. -void VISIBLE32FLAT -startBoot(void) -{ - // Clear low-memory allocations (required by PMM spec). - memset((void*)BUILD_STACK_ADDR, 0, BUILD_EBDA_MINIMUM - BUILD_STACK_ADDR); - - dprintf(3, "Jump to int19\n"); - struct bregs br; - memset(&br, 0, sizeof(br)); - br.flags = F_IF; - call16_int(0x19, &br); -} - -// Main setup code. -static void -maininit(void) -{ - // Initialize internal interfaces. - interface_init(); - - // Setup platform devices. - platform_hardware_setup(); - - // Start hardware initialization (if threads allowed during optionroms) - if (threads_during_optionroms()) - device_hardware_setup(); - - // Run vga option rom - vgarom_setup(); - sercon_setup(); - enable_vga_console(); - - // Do hardware initialization (if running synchronously) - if (!threads_during_optionroms()) { - device_hardware_setup(); - wait_threads(); - } - - // Run option roms - optionrom_setup(); - - // Allow user to modify overall boot order. - interactive_bootmenu(); - wait_threads(); - - // Prepare for boot. - prepareboot(); - - // Write protect bios memory. - make_bios_readonly(); - - // Invoke int 19 to start boot process. - startBoot(); -} - - -/**************************************************************** - * POST entry and code relocation - ****************************************************************/ - -// Update given relocs for the code at 'dest' with a given 'delta' -static void -updateRelocs(void *dest, u32 *rstart, u32 *rend, u32 delta) -{ - u32 *reloc; - for (reloc = rstart; reloc < rend; reloc++) - *((u32*)(dest + *reloc)) += delta; -} - -// Relocate init code and then call a function at its new address. -// The passed function should be in the "init" section and must not -// return. -void __noreturn -reloc_preinit(void *f, void *arg) -{ - void (*func)(void *) __noreturn = f; - if (!CONFIG_RELOCATE_INIT) - func(arg); - - // Allocate space for init code. - u32 initsize = SYMBOL(code32init_end) - SYMBOL(code32init_start); - u32 codealign = SYMBOL(_reloc_min_align); - void *codedest = memalign_tmp(codealign, initsize); - void *codesrc = VSYMBOL(code32init_start); - if (!codedest) - panic("No space for init relocation.\n"); - - // Copy code and update relocs (init absolute, init relative, and runtime) - dprintf(1, "Relocating init from %p to %p (size %d)\n" - , codesrc, codedest, initsize); - s32 delta = codedest - codesrc; - memcpy(codedest, codesrc, initsize); - updateRelocs(codedest, VSYMBOL(_reloc_abs_start), VSYMBOL(_reloc_abs_end) - , delta); - updateRelocs(codedest, VSYMBOL(_reloc_rel_start), VSYMBOL(_reloc_rel_end) - , -delta); - updateRelocs(VSYMBOL(code32flat_start), VSYMBOL(_reloc_init_start) - , VSYMBOL(_reloc_init_end), delta); - if (f >= codesrc && f < VSYMBOL(code32init_end)) - func = f + delta; - - // Call function in relocated code. - barrier(); - func(arg); -} - -// Runs after all code is present and prior to any modifications -void -code_mutable_preinit(void) -{ - if (HaveRunPost) - // Already run - return; - // Setup reset-vector entry point (controls legacy reboots). - rtc_write(CMOS_RESET_CODE, 0); - barrier(); - HaveRunPost = 1; - barrier(); -} - -// Setup for code relocation and then relocate. -void VISIBLE32INIT -dopost(void) -{ - code_mutable_preinit(); - - // Detect ram and setup internal malloc. - qemu_preinit(); - coreboot_preinit(); - malloc_preinit(); - - // Relocate initialization code and call maininit(). - reloc_preinit(maininit, NULL); -} - -// Entry point for Power On Self Test (POST) - the BIOS initilization -// phase. This function makes the memory at 0xc0000-0xfffff -// read/writable and then calls dopost(). -void VISIBLE32FLAT -handle_post(void) -{ - if (!CONFIG_QEMU && !CONFIG_COREBOOT) - return; - - serial_debug_preinit(); - debug_banner(); - - // Check if we are running under Xen. - xen_preinit(); - - // Allow writes to modify bios area (0xf0000) - make_bios_writable(); - - // Now that memory is read/writable - start post process. - dopost(); -} diff --git a/payloads/external/SeaBIOS/src/resume.c b/payloads/external/SeaBIOS/src/resume.c deleted file mode 100644 index fb0b8a89..00000000 --- a/payloads/external/SeaBIOS/src/resume.c +++ /dev/null @@ -1,157 +0,0 @@ -// Code for handling calls to "post" that are resume related. -// -// Copyright (C) 2008,2009 Kevin O'Connor <kevin@koconnor.net> -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "bregs.h" // struct bregs -#include "config.h" // CONFIG_* -#include "farptr.h" // FLATPTR_TO_SEGOFF -#include "hw/pci.h" // pci_reboot -#include "hw/pic.h" // pic_eoi2 -#include "hw/ps2port.h" // i8042_reboot -#include "hw/rtc.h" // rtc_read -#include "output.h" // dprintf -#include "stacks.h" // farcall16big -#include "std/bda.h" // struct bios_data_area_s -#include "string.h" // memset -#include "util.h" // dma_setup -#include "tcgbios.h" // tpm_s3_resume -#include "fw/romfile_loader.h" // romfile_fw_cfg_resume - -// Handler for post calls that look like a resume. -void VISIBLE16 -handle_resume(void) -{ - ASSERT16(); - int status = rtc_read(CMOS_RESET_CODE); - rtc_write(CMOS_RESET_CODE, 0); - dprintf(1, "In resume (status=%d)\n", status); - - dma_setup(); - - switch (status) { - case 0x01 ... 0x04: - case 0x06 ... 0x09: - panic("Unimplemented shutdown status: %02x\n", status); - - case 0x05: - // flush keyboard (issue EOI) and jump via 40h:0067h - pic_eoi2(); - // NO BREAK - case 0x0a: -#define BDA_JUMP (((struct bios_data_area_s *)0)->jump) - // resume execution by jump via 40h:0067h - asm volatile( - "movw %w1, %%ds\n" - "ljmpw *%0\n" - : : "m"(BDA_JUMP), "r"(SEG_BDA) - ); - break; - - case 0x0b: - // resume execution via IRET via 40h:0067h - asm volatile( - "movw %w1, %%ds\n" - "lssw %0, %%sp\n" - "iretw\n" - : : "m"(BDA_JUMP), "r"(SEG_BDA) - ); - break; - - case 0x0c: - // resume execution via RETF via 40h:0067h - asm volatile( - "movw %w1, %%ds\n" - "lssw %0, %%sp\n" - "lretw\n" - : : "m"(BDA_JUMP), "r"(SEG_BDA) - ); - break; - - default: - break; - } - - // Not a 16bit resume - do remaining checks in 32bit mode - asm volatile( - "movw %w1, %%ss\n" - "movl %0, %%esp\n" - "movl $_cfunc32flat_handle_resume32, %%edx\n" - "jmp transition32\n" - : : "i"(BUILD_S3RESUME_STACK_ADDR), "r"(0), "a"(status) - ); -} - -// Handle an S3 resume event -static void -s3_resume(void) -{ - if (!CONFIG_S3_RESUME) - return; - - u32 s3_resume_vector = find_resume_vector(); - if (!s3_resume_vector) { - dprintf(1, "No resume vector set!\n"); - return; - } - - pic_setup(); - smm_setup(); - smp_resume(); - - pci_resume(); - - /* resume TPM before we may measure option roms */ - tpm_s3_resume(); - s3_resume_vga(); - - /* Replay any fw_cfg entries that go back to the host */ - romfile_fw_cfg_resume(); - - make_bios_readonly(); - - // Invoke the resume vector. - struct bregs br; - memset(&br, 0, sizeof(br)); - dprintf(1, "Jump to resume vector (%x)\n", s3_resume_vector); - br.code = FLATPTR_TO_SEGOFF((void*)s3_resume_vector); - farcall16big(&br); -} - -// Attempt to invoke a hard-reboot. -static void -tryReboot(void) -{ - dprintf(1, "Attempting a hard reboot\n"); - - // Use a QEMU specific reboot on QEMU - qemu_reboot(); - - // Reboot using ACPI RESET_REG - acpi_reboot(); - - // Try keyboard controller reboot. - i8042_reboot(); - - // Try PCI 0xcf9 reboot - pci_reboot(); - - // Try triple fault - asm volatile("int3"); - - panic("Could not reboot"); -} - -void VISIBLE32FLAT -handle_resume32(int status) -{ - ASSERT32FLAT(); - dprintf(1, "In 32bit resume\n"); - - if (status == 0xfe) - s3_resume(); - - // Must be a soft reboot - invoke a hard reboot. - tryReboot(); -} diff --git a/payloads/external/SeaBIOS/src/romfile.c b/payloads/external/SeaBIOS/src/romfile.c deleted file mode 100644 index b598274e..00000000 --- a/payloads/external/SeaBIOS/src/romfile.c +++ /dev/null @@ -1,146 +0,0 @@ -// Access to pseudo "file" interface for configuration information. -// -// Copyright (C) 2012 Kevin O'Connor <kevin@koconnor.net> -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "config.h" // CONFIG_* -#include "malloc.h" // free -#include "output.h" // dprintf -#include "romfile.h" // struct romfile_s -#include "string.h" // memcmp - -static struct romfile_s *RomfileRoot VARVERIFY32INIT; - -void -romfile_add(struct romfile_s *file) -{ - dprintf(3, "Add romfile: %s (size=%d)\n", file->name, file->size); - file->next = RomfileRoot; - RomfileRoot = file; -} - -// Search for the specified file. -static struct romfile_s * -__romfile_findprefix(const char *prefix, int prefixlen, struct romfile_s *prev) -{ - struct romfile_s *cur = RomfileRoot; - if (prev) - cur = prev->next; - while (cur) { - if (memcmp(prefix, cur->name, prefixlen) == 0) - return cur; - cur = cur->next; - } - return NULL; -} - -struct romfile_s * -romfile_findprefix(const char *prefix, struct romfile_s *prev) -{ - return __romfile_findprefix(prefix, strlen(prefix), prev); -} - -struct romfile_s * -romfile_find(const char *name) -{ - return __romfile_findprefix(name, strlen(name) + 1, NULL); -} - -// Helper function to find, malloc_tmphigh, and copy a romfile. This -// function adds a trailing zero to the malloc'd copy. -void * -romfile_loadfile(const char *name, int *psize) -{ - struct romfile_s *file = romfile_find(name); - if (!file) - return NULL; - - int filesize = file->size; - if (!filesize) - return NULL; - - char *data = malloc_tmphigh(filesize+1); - if (!data) { - warn_noalloc(); - return NULL; - } - - dprintf(5, "Copying romfile '%s' (len %d)\n", name, filesize); - int ret = file->copy(file, data, filesize); - if (ret < 0) { - free(data); - return NULL; - } - if (psize) - *psize = filesize; - data[filesize] = '\0'; - return data; -} - -// Attempt to load an integer from the given file - return 'defval' -// if unsuccessful. -u64 -romfile_loadint(const char *name, u64 defval) -{ - struct romfile_s *file = romfile_find(name); - if (!file) - return defval; - - int filesize = file->size; - if (!filesize || filesize > sizeof(u64) || (filesize & (filesize-1))) - // Doesn't look like a valid integer. - return defval; - - u64 val = 0; - int ret = file->copy(file, &val, sizeof(val)); - if (ret < 0) - return defval; - return val; -} - -struct const_romfile_s { - struct romfile_s file; - void *data; -}; - -static int -const_read_file(struct romfile_s *file, void *dst, u32 maxlen) -{ - if (file->size > maxlen) - return -1; - struct const_romfile_s *cfile; - cfile = container_of(file, struct const_romfile_s, file); - if (maxlen > file->size) - maxlen = file->size; - memcpy(dst, cfile->data, maxlen); - return file->size; -} - -static void -const_romfile_add(char *name, void *data, int size) -{ - struct const_romfile_s *cfile = malloc_tmp(sizeof(*cfile)); - if (!cfile) { - warn_noalloc(); - return; - } - memset(cfile, 0, sizeof(*cfile)); - strtcpy(cfile->file.name, name, sizeof(cfile->file.name)); - cfile->file.size = size; - cfile->file.copy = const_read_file; - cfile->data = data; - romfile_add(&cfile->file); -} - -void -const_romfile_add_int(char *name, u32 value) -{ - u32 *data = malloc_tmp(sizeof(*data)); - if (!data) { - warn_noalloc(); - return; - } - *data = value; - const_romfile_add(name, data, sizeof(*data)); -} diff --git a/payloads/external/SeaBIOS/src/romfile.h b/payloads/external/SeaBIOS/src/romfile.h deleted file mode 100644 index 3e0f8200..00000000 --- a/payloads/external/SeaBIOS/src/romfile.h +++ /dev/null @@ -1,21 +0,0 @@ -#ifndef __ROMFILE_H -#define __ROMFILE_H - -#include "types.h" // u32 - -// romfile.c -struct romfile_s { - struct romfile_s *next; - char name[128]; - u32 size; - int (*copy)(struct romfile_s *file, void *dest, u32 maxlen); -}; -void romfile_add(struct romfile_s *file); -struct romfile_s *romfile_findprefix(const char *prefix, struct romfile_s *prev); -struct romfile_s *romfile_find(const char *name); -void *romfile_loadfile(const char *name, int *psize); -u64 romfile_loadint(const char *name, u64 defval); - -void const_romfile_add_int(char *name, u32 value); - -#endif // romfile.h diff --git a/payloads/external/SeaBIOS/src/romlayout.S b/payloads/external/SeaBIOS/src/romlayout.S deleted file mode 100644 index c4a4635e..00000000 --- a/payloads/external/SeaBIOS/src/romlayout.S +++ /dev/null @@ -1,698 +0,0 @@ -// Rom layout and bios assembler to C interface. -// -// Copyright (C) 2008-2012 Kevin O'Connor <kevin@koconnor.net> -// Copyright (C) 2002 MandrakeSoft S.A. -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "asm-offsets.h" // BREGS_* -#include "config.h" // CONFIG_* -#include "entryfuncs.S" // ENTRY_* -#include "hw/rtc.h" // CMOS_RESET_CODE -#include "x86.h" // CR0_* - - .code16 - - -/**************************************************************** - * 16bit / 32bit call trampolines - ****************************************************************/ - -// Place CPU into 32bit mode from 16bit mode. -// %edx = return location (in 32bit mode) -// Clobbers: ecx, flags, segment registers, cr0, idt/gdt - DECLFUNC transition32 - .global transition32_nmi_off -transition32: - // Disable irqs (and clear direction flag) - cli - cld - - // Disable nmi - movl %eax, %ecx - movl $CMOS_RESET_CODE|NMI_DISABLE_BIT, %eax - outb %al, $PORT_CMOS_INDEX - inb $PORT_CMOS_DATA, %al - - // enable a20 - inb $PORT_A20, %al - orb $A20_ENABLE_BIT, %al - outb %al, $PORT_A20 - movl %ecx, %eax - -transition32_nmi_off: - // Set segment descriptors - lidtw %cs:pmode_IDT_info - lgdtw %cs:rombios32_gdt_48 - - // Enable protected mode - movl %cr0, %ecx - andl $~(CR0_PG|CR0_CD|CR0_NW), %ecx - orl $CR0_PE, %ecx - movl %ecx, %cr0 - - // start 32bit protected mode code - ljmpl $SEG32_MODE32_CS, $(BUILD_BIOS_ADDR + 1f) - - .code32 - // init data segments -1: movl $SEG32_MODE32_DS, %ecx - movw %cx, %ds - movw %cx, %es - movw %cx, %ss - movw %cx, %fs - movw %cx, %gs - - jmpl *%edx - .code16 - -// Place CPU into 16bit mode from 32bit mode. -// %edx = return location (in 16bit mode) -// Clobbers: ecx, flags, segment registers, cr0, idt/gdt - DECLFUNC transition16 - .global transition16big - .code32 -transition16: - // Reset data segment limits - movl $SEG32_MODE16_DS, %ecx - movw %cx, %ds - movw %cx, %es - movw %cx, %ss - movw %cx, %fs - movw %cx, %gs - - // Jump to 16bit mode - ljmpw $SEG32_MODE16_CS, $1f - -transition16big: - movl $SEG32_MODE16BIG_DS, %ecx - movw %cx, %ds - movw %cx, %es - movw %cx, %ss - movw %cx, %fs - movw %cx, %gs - - ljmpw $SEG32_MODE16BIG_CS, $1f - - .code16 - // Disable protected mode -1: movl %cr0, %ecx - andl $~CR0_PE, %ecx - movl %ecx, %cr0 - - // far jump to flush CPU queue after transition to real mode - ljmpw $SEG_BIOS, $2f - - // restore IDT to normal real-mode defaults -2: lidtw %cs:rmode_IDT_info - - // Clear segment registers - xorw %cx, %cx - movw %cx, %fs - movw %cx, %gs - movw %cx, %es - movw %cx, %ds - movw %cx, %ss // Assume stack is in segment 0 - - jmpl *%edx - - -/**************************************************************** - * External calling trampolines - ****************************************************************/ - -// Far call a 16bit function from 16bit mode with a specified cpu register state -// %eax = address of struct bregs, %edx = segment of struct bregs -// Clobbers: %e[bc]x, %e[ds]i, flags - DECLFUNC __farcall16 -__farcall16: - // Save %edx/%eax, %ebp - pushl %ebp - pushl %eax - pushl %edx - - // Setup for iretw call - movl %edx, %ds - pushw %cs - pushw $1f // return point - pushw BREGS_flags(%eax) // flags - pushl BREGS_code(%eax) // CS:IP - - // Load calling registers and invoke call - RESTOREBREGS_DSEAX - iretw // XXX - just do a lcalll -1: - // Store flags, es, eax - pushfw - cli - cld - pushw %ds - pushl %eax - movw 0x08(%esp), %ds - movl 0x0c(%esp), %eax - SAVEBREGS_POP_DSEAX - popw BREGS_flags(%eax) - movw %ss, %cx - movw %cx, %ds // Restore %ds == %ss - - // Remove %edx/%eax, restore %ebp - popl %edx - popl %eax - popl %ebp - - retl - -// IRQ trampolines - .macro IRQ_TRAMPOLINE num - DECLFUNC irq_trampoline_0x\num - irq_trampoline_0x\num : - int $0x\num - lretw - .endm - - IRQ_TRAMPOLINE 02 - IRQ_TRAMPOLINE 05 - IRQ_TRAMPOLINE 10 - IRQ_TRAMPOLINE 13 - IRQ_TRAMPOLINE 15 - IRQ_TRAMPOLINE 16 - IRQ_TRAMPOLINE 18 - IRQ_TRAMPOLINE 19 - IRQ_TRAMPOLINE 1b - IRQ_TRAMPOLINE 1c - IRQ_TRAMPOLINE 4a - - -/**************************************************************** - * Misc. entry points. - ****************************************************************/ - -// Entry point for QEMU smi interrupts. - DECLFUNC entry_smi -entry_smi: - // Transition to 32bit mode. - movl $1f + BUILD_BIOS_ADDR, %edx - jmp transition32_nmi_off - .code32 -1: movl $BUILD_SMM_ADDR + 0x8000, %esp - calll _cfunc32flat_handle_smi - BUILD_BIOS_ADDR - rsm - .code16 - -// Entry point for QEMU smp sipi interrupts. - DECLFUNC entry_smp -entry_smp: - // Transition to 32bit mode. - cli - cld - movl $2f + BUILD_BIOS_ADDR, %edx - jmp transition32_nmi_off - .code32 - // Acquire lock and take ownership of shared stack -1: rep ; nop -2: lock btsl $0, SMPLock - jc 1b - movl SMPStack, %esp - // Call handle_smp - calll _cfunc32flat_handle_smp - BUILD_BIOS_ADDR - // Release lock and halt processor. - movl $0, SMPLock -3: hlt - jmp 3b - .code16 - -// Resume (and reboot) entry point - called from entry_post - DECLFUNC entry_resume -entry_resume: - // Disable interrupts - cli - cld - // Use the ExtraStack in low mem. - movl $_zonelow_seg, %eax - movw %ax, %ds - movw %ax, %ss - movl $ExtraStack + BUILD_EXTRA_STACK_SIZE, %esp - // Call handler. - jmp handle_resume - -// PMM entry point - DECLFUNC entry_pmm -entry_pmm: - pushl %esp // Backup %esp, then clear high bits - movzwl %sp, %esp - pushfl // Save registers clobbered by C code - cli - cld - PUSHBREGS - movl %ss, %ecx // Move %ss to %ds - movw %cx, %ds - shll $4, %ecx - movl $_cfunc32flat_handle_pmm, %eax // Setup: call32(handle_pmm, args, -1) - leal PUSHBREGS_size+12(%esp, %ecx), %edx // %edx points to start of args - movl $-1, %ecx - calll __call32 - movw %ax, BREGS_eax(%esp) // Modify %ax:%dx to return %eax - shrl $16, %eax - movw %ax, BREGS_edx(%esp) - POPBREGS - popfl - popl %esp - lretw - -// PnP entry points - DECLFUNC entry_pnp_real - .global entry_pnp_prot -entry_pnp_prot: - pushl %esp - jmp 1f -entry_pnp_real: - pushl %esp // Backup %esp, then clear high bits - movzwl %sp, %esp -1: - pushfl // Save registers clobbered by C code - cli - cld - PUSHBREGS - movw %ss, %cx // Move %ss to %ds - movw %cx, %ds - leal PUSHBREGS_size+12(%esp), %eax // %eax points to start of u16 args - calll handle_pnp - movw %ax, BREGS_eax(%esp) // Modify %eax to return %ax - POPBREGS - popfl - popl %esp - lretw - -// APM entry points - DECLFUNC entry_apm16 -entry_apm16: - pushfw // save flags - pushl %eax // dummy - ENTRY_ARG handle_apm - addw $4, %sp // pop dummy - popfw // restore flags - lretw - - DECLFUNC entry_apm32 - .code32 -entry_apm32: - pushfl - pushl %gs - pushl %cs // Move second descriptor after %cs to %gs - addl $16, (%esp) - popl %gs - ENTRY_ARG_ESP _cfunc32seg_handle_apm - popl %gs - popfl - lretl - .code16 - -// PCI-BIOS entry points - DECLFUNC entry_pcibios32 - .code32 -entry_pcibios32: - pushfl - pushl %gs // Backup %gs and set %gs=%ds - pushl %ds - popl %gs - ENTRY_ARG_ESP _cfunc32seg_handle_pcibios - popl %gs - popfl - lretl - .code16 - - DECLFUNC entry_pcibios16 -entry_pcibios16: - ENTRY_ARG handle_pcibios - iretw - -// int 1589 entry point - DECLFUNC entry_1589 -entry_1589: - ENTRY_ARG handle_1589 - iretw - -// BIOS32 support - DECLFUNC entry_bios32 - .code32 -entry_bios32: - pushfl -#if CONFIG_PCIBIOS - // Check for PCI-BIOS request - cmpl $0x49435024, %eax // $PCI - jne 1f - movl $BUILD_BIOS_ADDR, %ebx - movl $BUILD_BIOS_SIZE, %ecx - movl $entry_pcibios32, %edx - xorb %al, %al - jmp 2f -#endif - // Unknown request -1: movb $0x80, %al - // Return to caller -2: popfl - lretl - .code16 - -// 32bit elf entry point - DECLFUNC entry_elf - .code32 -entry_elf: - cli - cld - movl %eax, entry_elf_eax - movl %ebx, entry_elf_ebx - lidtl (BUILD_BIOS_ADDR + pmode_IDT_info) - lgdtl (BUILD_BIOS_ADDR + rombios32_gdt_48) - movl $SEG32_MODE32_DS, %eax - movw %ax, %ds - movw %ax, %es - movw %ax, %fs - movw %ax, %gs - movw %ax, %ss - movl $BUILD_STACK_ADDR, %esp - ljmpl $SEG32_MODE32_CS, $_cfunc32flat_handle_post - .code16 - -// UEFI Compatibility Support Module (CSM) entry point - DECLFUNC entry_csm -entry_csm: - // Backup register state - pushfw - cli - cld - pushl %eax // dummy - PUSHBREGS - - // Backup stack location and convert to a "flat pointer" - movl %ss, %eax - movw %ax, BREGS_code+2(%esp) // Store %ss in bregs->code.seg - shll $4, %eax - addl %esp, %eax - - // Change to BUILD_STACK_ADDR stack and call handle_csm(bregs) - ENTRY_INTO32 _cfunc32flat_handle_csm - - DECLFUNC __csm_return - .code32 -__csm_return: - movl $1f, %edx - jmp transition16big - .code16 - - // Switch back to original stack -1: movzwl BREGS_code+2(%eax), %edx - movl %edx, %ecx - shll $4, %ecx - subl %ecx, %eax - movl %edx, %ss - movl %eax, %esp - - // Restore register state and return. - POPBREGS - addw $4, %sp // pop dummy - popfw - lretw - -// Serial console "hooked vga" entry point - DECLFUNC entry_sercon -entry_sercon: - // Setup for chain loading to real vga handler - pushfw - pushl %cs:sercon_real_vga_handler - - // Set %ds to varlow segment - cli - cld - pushw %ds - pushl %eax - movl $_zonelow_seg, %eax - movl %eax, %ds - - // Test if the sercon handler can be called - movl %esp, %eax // Test for broken x86emu - pushl $1f - retl -1: cmpl %esp, %eax - jne 4f - cmpb $0, sercon_enable // Test that sercon is enabled - je 3f - - // call handle_sercon - popl %eax - popw %ds -2: pushl $handle_sercon -#if CONFIG_ENTRY_EXTRASTACK - jmp irqentry_arg_extrastack -#else - jmp irqentry_arg -#endif - - // sercon disabled - check for legacy text modeset and otherwise exit -3: popl %eax - popw %ds - cmpw $0x0007, %ax - jle 2b - iretw - - // Running on broken x86emu - restore stack and exit -4: movl %eax, %esp - popl %eax - popw %ds - iretw - - -/**************************************************************** - * Interrupt entry points - ****************************************************************/ - - // Main entry point for hardware interrupts handled on extra stack - DECLFUNC irqentry_extrastack -irqentry_extrastack: - cli - cld - pushw %ds // Set %ds:%eax to space on ExtraStack - pushl %eax - movl $_zonelow_seg, %eax - movl %eax, %ds - movl StackPos, %eax - subl $PUSHBREGS_size+8, %eax - SAVEBREGS_POP_DSEAX - popl %ecx - movl %esp, PUSHBREGS_size(%eax) - movw %ss, PUSHBREGS_size+4(%eax) - - movw %ds, %dx // Setup %ss/%esp and call function - movw %dx, %ss - movl %eax, %esp - calll *%ecx - - movl %esp, %eax // Restore registers and return - movw PUSHBREGS_size+4(%eax), %ss - movl PUSHBREGS_size(%eax), %esp - RESTOREBREGS_DSEAX - iretw - - // Main entry point for software interrupts handled on extra stack - DECLFUNC irqentry_arg_extrastack -irqentry_arg_extrastack: - cli - cld - pushw %ds // Set %ds:%eax to space on ExtraStack - pushl %eax - movl $_zonelow_seg, %eax - movl %eax, %ds - movl StackPos, %eax - subl $PUSHBREGS_size+16, %eax - SAVEBREGS_POP_DSEAX // Save registers on extra stack - popl %ecx - movl %esp, PUSHBREGS_size+8(%eax) - movw %ss, PUSHBREGS_size+12(%eax) - popl BREGS_code(%eax) - popw BREGS_flags(%eax) - - movw %ds, %dx // Setup %ss/%esp and call function - movw %dx, %ss - movl %eax, %esp - calll *%ecx - - movl %esp, %eax // Restore registers and return - movw PUSHBREGS_size+12(%eax), %ss - movl PUSHBREGS_size+8(%eax), %esp - popl %edx - popw %dx - pushw BREGS_flags(%eax) - pushl BREGS_code(%eax) - RESTOREBREGS_DSEAX - iretw - - // Main entry point for software interrupts (using caller's stack) - DECLFUNC irqentry_arg -irqentry_arg: - ENTRY_ARG_ST - iretw - - // Helper macros for hardware interrupt declaration - .macro IRQ_ENTRY num - .global entry_\num - entry_\num : - pushl $ handle_\num - jmp irqentry_extrastack - .endm - - .macro DECL_IRQ_ENTRY num - DECLFUNC entry_\num - IRQ_ENTRY \num - .endm - - // Helper macros for software interrupt declaration - .macro IRQ_ENTRY_ARG num - .global entry_\num - entry_\num : - pushl $ handle_\num -#if CONFIG_ENTRY_EXTRASTACK - jmp irqentry_arg_extrastack -#else - jmp irqentry_arg -#endif - .endm - - .macro DECL_IRQ_ENTRY_ARG num - DECLFUNC entry_\num - IRQ_ENTRY_ARG \num - .endm - - // Various entry points (that don't require a fixed location). - DECL_IRQ_ENTRY_ARG 13 - DECL_IRQ_ENTRY 76 - DECL_IRQ_ENTRY 70 - DECL_IRQ_ENTRY 74 - DECL_IRQ_ENTRY 75 - DECL_IRQ_ENTRY hwpic1 - DECL_IRQ_ENTRY hwpic2 - - // int 18/19 are special - they reset stack and call into 32bit mode. - DECLFUNC entry_19 -entry_19: - ENTRY_INTO32 _cfunc32flat_handle_19 - - DECLFUNC entry_18 -entry_18: - ENTRY_INTO32 _cfunc32flat_handle_18 - - -/**************************************************************** - * Fixed position entry points - ****************************************************************/ - - // Specify a location in the fixed part of bios area. - .macro ORG addr - .section .fixedaddr.\addr - .endm - - ORG 0xe05b -entry_post: - cmpl $0, %cs:HaveRunPost // Check for resume/reboot - jnz entry_resume - ENTRY_INTO32 _cfunc32flat_handle_post // Normal entry point - - ORG 0xe2c3 - .global entry_02 -entry_02: - ENTRY handle_02 // NMI handler does not switch onto extra stack - iretw - - ORG 0xe3fe - .global entry_13_official -entry_13_official: - jmp entry_13 - - // 0xe401 - OldFDPT in misc.c - - ORG 0xe6f2 - .global entry_19_official -entry_19_official: - jmp entry_19 - - // 0xe6f5 - BIOS_CONFIG_TABLE in misc.c - - // 0xe729 - BaudTable in misc.c - - ORG 0xe739 - IRQ_ENTRY_ARG 14 - - ORG 0xe82e - IRQ_ENTRY_ARG 16 - - ORG 0xe987 - IRQ_ENTRY 09 - - ORG 0xec59 - IRQ_ENTRY_ARG 40 - - ORG 0xef57 - IRQ_ENTRY 0e - - // 0xefc7 - diskette_param_table in misc.c - - ORG 0xefd2 - IRQ_ENTRY_ARG 17 - - ORG 0xf045 -entry_10_0x0f: - // XXX - INT 10 Functions 0-Fh Entry Point - iretw - - ORG 0xf065 -entry_10: - iretw - - // 0xf0a4 - VideoParams in misc.c - - ORG 0xf841 - IRQ_ENTRY_ARG 12 - - ORG 0xf84d - IRQ_ENTRY_ARG 11 - - ORG 0xf859 - .global entry_15_official -entry_15_official: - cmpb $0x89, %ah - je entry_1589 // 1589 calls return in protected mode - IRQ_ENTRY_ARG 15 - - // 0xfa6e - vgafont8 in font.c - - ORG 0xfe6e - .global entry_1a_official -entry_1a_official: - cmpb $0xb1, %ah - je entry_pcibios16 // PCIBIOS calls can be in protected mode - IRQ_ENTRY_ARG 1a - - ORG 0xfea5 - IRQ_ENTRY 08 - - // 0xfef3 - InitVectors in misc.c - - ORG 0xff53 - .global entry_iret_official -entry_iret_official: - iretw - - ORG 0xff54 - IRQ_ENTRY_ARG 05 - - ORG 0xfff0 // Power-up Entry Point - .global reset_vector -reset_vector: - ljmpw $SEG_BIOS, $entry_post - - // 0xfff5 - BiosDate in misc.c - - // 0xfffe - BiosModelId in misc.c - - // 0xffff - BiosChecksum in misc.c - - .end diff --git a/payloads/external/SeaBIOS/src/sercon.c b/payloads/external/SeaBIOS/src/sercon.c deleted file mode 100644 index 66a1f241..00000000 --- a/payloads/external/SeaBIOS/src/sercon.c +++ /dev/null @@ -1,677 +0,0 @@ -// serial console support -// -// Copyright (C) 2016 Gerd Hoffmann <kraxel@redhat.com> -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "biosvar.h" // SET_BDA -#include "bregs.h" // struct bregs -#include "stacks.h" // yield -#include "output.h" // dprintf -#include "util.h" // irqtimer_calc_ticks -#include "string.h" // memcpy -#include "romfile.h" // romfile_loadint -#include "hw/serialio.h" // SEROFF_IER -#include "cp437.h" - -static u8 video_rows(void) -{ - return GET_BDA(video_rows)+1; -} - -static u8 video_cols(void) -{ - return GET_BDA(video_cols); -} - -static u8 cursor_pos_col(void) -{ - u16 pos = GET_BDA(cursor_pos[0]); - return pos & 0xff; -} - -static u8 cursor_pos_row(void) -{ - u16 pos = GET_BDA(cursor_pos[0]); - return (pos >> 8) & 0xff; -} - -static void cursor_pos_set(u8 row, u8 col) -{ - u16 pos = ((u16)row << 8) | col; - SET_BDA(cursor_pos[0], pos); -} - -/**************************************************************** - * serial console output - ****************************************************************/ - -VARLOW u16 sercon_port; -VARLOW u8 sercon_split; -VARLOW u8 sercon_enable; -VARFSEG struct segoff_s sercon_real_vga_handler; - -/* - * We have a small output buffer here, for lazy output. That allows - * to avoid a whole bunch of control sequences for pointless cursor - * moves, so when logging the output it'll be *alot* less cluttered. - * - * sercon_char/attr is the actual output buffer. - * sercon_attr_last is the most recent attribute sent to the terminal. - * sercon_col_last is the most recent column sent to the terminal. - * sercon_row_last is the most recent row sent to the terminal. - */ -VARLOW u8 sercon_attr_last; -VARLOW u8 sercon_col_last; -VARLOW u8 sercon_row_last; -VARLOW u8 sercon_char; -VARLOW u8 sercon_attr = 0x07; - -static VAR16 u8 sercon_cmap[8] = { '0', '4', '2', '6', '1', '5', '3', '7' }; - -static int sercon_splitmode(void) -{ - return GET_LOW(sercon_split); -} - -static void sercon_putchar(u8 chr) -{ - u16 addr = GET_LOW(sercon_port); - u32 end = irqtimer_calc_ticks(0x0a); - -#if 0 - /* for visual control sequence debugging */ - if (chr == '\x1b') - chr = '*'; -#endif - - for (;;) { - u8 lsr = inb(addr+SEROFF_LSR); - if ((lsr & 0x60) == 0x60) { - // Success - can write data - outb(chr, addr+SEROFF_DATA); - break; - } - if (irqtimer_check(end)) { - break; - } - yield(); - } -} - -static void sercon_term_reset(void) -{ - sercon_putchar('\x1b'); - sercon_putchar('c'); -} - -static void sercon_term_clear_screen(void) -{ - sercon_putchar('\x1b'); - sercon_putchar('['); - sercon_putchar('2'); - sercon_putchar('J'); -} - -static void sercon_term_no_linewrap(void) -{ - sercon_putchar('\x1b'); - sercon_putchar('['); - sercon_putchar('?'); - sercon_putchar('7'); - sercon_putchar('l'); -} - -static void sercon_term_cursor_goto(u8 row, u8 col) -{ - row++; col++; - sercon_putchar('\x1b'); - sercon_putchar('['); - sercon_putchar('0' + row / 10); - sercon_putchar('0' + row % 10); - sercon_putchar(';'); - sercon_putchar('0' + col / 10); - sercon_putchar('0' + col % 10); - sercon_putchar('H'); -} - -static void sercon_term_set_color(u8 fg, u8 bg, u8 bold) -{ - sercon_putchar('\x1b'); - sercon_putchar('['); - sercon_putchar('0'); - if (fg != 7) { - sercon_putchar(';'); - sercon_putchar('3'); - sercon_putchar(GET_GLOBAL(sercon_cmap[fg & 7])); - } - if (bg != 0) { - sercon_putchar(';'); - sercon_putchar('4'); - sercon_putchar(GET_GLOBAL(sercon_cmap[bg & 7])); - } - if (bold) { - sercon_putchar(';'); - sercon_putchar('1'); - } - sercon_putchar('m'); -} - -static void sercon_set_attr(u8 attr) -{ - if (attr == GET_LOW(sercon_attr_last)) - return; - - SET_LOW(sercon_attr_last, attr); - sercon_term_set_color((attr >> 0) & 7, - (attr >> 4) & 7, - attr & 0x08); -} - -static void sercon_print_utf8(u8 chr) -{ - u16 unicode = cp437_to_unicode(chr); - - if (unicode < 0x7f) { - sercon_putchar(unicode); - } else if (unicode < 0x7ff) { - sercon_putchar(0xc0 | ((unicode >> 6) & 0x1f)); - sercon_putchar(0x80 | ((unicode >> 0) & 0x3f)); - } else { - sercon_putchar(0xe0 | ((unicode >> 12) & 0x0f)); - sercon_putchar(0x80 | ((unicode >> 6) & 0x3f)); - sercon_putchar(0x80 | ((unicode >> 0) & 0x3f)); - } -} - -static void sercon_cursor_pos_set(u8 row, u8 col) -{ - if (!sercon_splitmode()) { - cursor_pos_set(row, col); - } else { - /* let vgabios update cursor */ - } -} - -static void sercon_lazy_cursor_sync(void) -{ - u8 row = cursor_pos_row(); - u8 col = cursor_pos_col(); - - if (GET_LOW(sercon_row_last) == row && - GET_LOW(sercon_col_last) == col) - return; - - if (col == 0 && GET_LOW(sercon_row_last) <= row) { - if (GET_LOW(sercon_col_last) != 0) { - sercon_putchar('\r'); - SET_LOW(sercon_col_last, 0); - } - while (GET_LOW(sercon_row_last) < row) { - sercon_putchar('\n'); - SET_LOW(sercon_row_last, GET_LOW(sercon_row_last)+1); - } - if (GET_LOW(sercon_row_last) == row && - GET_LOW(sercon_col_last) == col) - return; - } - - sercon_term_cursor_goto(row, col); - SET_LOW(sercon_row_last, row); - SET_LOW(sercon_col_last, col); -} - -static void sercon_lazy_flush(void) -{ - u8 chr, attr; - - chr = GET_LOW(sercon_char); - attr = GET_LOW(sercon_attr); - if (chr) { - sercon_set_attr(attr); - sercon_print_utf8(chr); - SET_LOW(sercon_col_last, GET_LOW(sercon_col_last) + 1); - } - - sercon_lazy_cursor_sync(); - - SET_LOW(sercon_attr, 0x07); - SET_LOW(sercon_char, 0x00); -} - -static void sercon_lazy_cursor_update(u8 row, u8 col) -{ - sercon_cursor_pos_set(row, col); - SET_LOW(sercon_row_last, row); - SET_LOW(sercon_col_last, col); -} - -static void sercon_lazy_backspace(void) -{ - u8 col; - - sercon_lazy_flush(); - col = cursor_pos_col(); - if (col > 0) { - sercon_putchar(8); - sercon_lazy_cursor_update(cursor_pos_row(), col-1); - } -} - -static void sercon_lazy_cr(void) -{ - sercon_cursor_pos_set(cursor_pos_row(), 0); -} - -static void sercon_lazy_lf(void) -{ - u8 row; - - row = cursor_pos_row() + 1; - if (row >= video_rows()) { - /* scrolling up */ - row = video_rows()-1; - if (GET_LOW(sercon_row_last) > 0) { - SET_LOW(sercon_row_last, GET_LOW(sercon_row_last) - 1); - } - } - sercon_cursor_pos_set(row, cursor_pos_col()); -} - -static void sercon_lazy_move_cursor(void) -{ - u8 col; - - col = cursor_pos_col() + 1; - if (col >= video_cols()) { - sercon_lazy_cr(); - sercon_lazy_lf(); - } else { - sercon_cursor_pos_set(cursor_pos_row(), col); - } -} - -static void sercon_lazy_putchar(u8 chr, u8 attr, u8 teletype) -{ - if (cursor_pos_row() != GET_LOW(sercon_row_last) || - cursor_pos_col() != GET_LOW(sercon_col_last)) { - sercon_lazy_flush(); - } - - SET_LOW(sercon_char, chr); - if (teletype) - sercon_lazy_move_cursor(); - else - SET_LOW(sercon_attr, attr); -} - -/* Set video mode */ -static void sercon_1000(struct bregs *regs) -{ - u8 clearscreen = !(regs->al & 0x80); - u8 mode = regs->al & 0x7f; - u8 rows, cols; - - if (!sercon_splitmode()) { - switch (mode) { - case 0x00: - case 0x01: - case 0x04: /* 320x200 */ - case 0x05: /* 320x200 */ - cols = 40; - rows = 25; - regs->al = 0x30; - break; - case 0x02: - case 0x03: - case 0x06: /* 640x200 */ - case 0x07: - default: - cols = 80; - rows = 25; - regs->al = 0x30; - break; - } - cursor_pos_set(0, 0); - SET_BDA(video_mode, mode); - SET_BDA(video_cols, cols); - SET_BDA(video_rows, rows-1); - SET_BDA(cursor_type, 0x0007); - } else { - /* let vgabios handle mode init */ - } - - SET_LOW(sercon_enable, mode <= 0x07); - SET_LOW(sercon_col_last, 0); - SET_LOW(sercon_row_last, 0); - SET_LOW(sercon_attr_last, 0); - - sercon_term_reset(); - sercon_term_no_linewrap(); - if (clearscreen) - sercon_term_clear_screen(); -} - -/* Set text-mode cursor shape */ -static void sercon_1001(struct bregs *regs) -{ - /* show/hide cursor? */ - SET_BDA(cursor_type, regs->cx); -} - -/* Set cursor position */ -static void sercon_1002(struct bregs *regs) -{ - sercon_cursor_pos_set(regs->dh, regs->dl); -} - -/* Get cursor position */ -static void sercon_1003(struct bregs *regs) -{ - regs->cx = GET_BDA(cursor_type); - regs->dh = cursor_pos_row(); - regs->dl = cursor_pos_col(); -} - -/* Scroll up window */ -static void sercon_1006(struct bregs *regs) -{ - sercon_lazy_flush(); - if (regs->al == 0) { - /* clear rect, do only in case this looks like a fullscreen clear */ - if (regs->ch == 0 && - regs->cl == 0 && - regs->dh == video_rows()-1 && - regs->dl == video_cols()-1) { - sercon_set_attr(regs->bh); - sercon_term_clear_screen(); - } - } else { - sercon_putchar('\r'); - sercon_putchar('\n'); - } -} - -/* Read character and attribute at cursor position */ -static void sercon_1008(struct bregs *regs) -{ - regs->ah = 0x07; - regs->bh = ' '; -} - -/* Write character and attribute at cursor position */ -static void sercon_1009(struct bregs *regs) -{ - u16 count = regs->cx; - - if (count == 1) { - sercon_lazy_putchar(regs->al, regs->bl, 0); - - } else if (regs->al == 0x20 && - video_rows() * video_cols() == count && - cursor_pos_row() == 0 && - cursor_pos_col() == 0) { - /* override everything with spaces -> this is clear screen */ - sercon_lazy_flush(); - sercon_set_attr(regs->bl); - sercon_term_clear_screen(); - - } else { - sercon_lazy_flush(); - sercon_set_attr(regs->bl); - while (count) { - sercon_print_utf8(regs->al); - count--; - } - sercon_term_cursor_goto(cursor_pos_row(), - cursor_pos_col()); - } -} - -/* Teletype output */ -static void sercon_100e(struct bregs *regs) -{ - switch (regs->al) { - case 7: - sercon_putchar(0x07); - break; - case 8: - sercon_lazy_backspace(); - break; - case '\r': - sercon_lazy_cr(); - break; - case '\n': - sercon_lazy_lf(); - break; - default: - sercon_lazy_putchar(regs->al, 0, 1); - break; - } -} - -/* Get current video mode */ -static void sercon_100f(struct bregs *regs) -{ - regs->al = GET_BDA(video_mode); - regs->ah = GET_BDA(video_cols); -} - -/* VBE 2.0 */ -static void sercon_104f(struct bregs *regs) -{ - if (!sercon_splitmode()) { - regs->ax = 0x0100; - } else { - // Disable sercon entry point on any vesa modeset - if (regs->al == 0x02) - SET_LOW(sercon_enable, 0); - } -} - -static void sercon_10XX(struct bregs *regs) -{ - warn_unimplemented(regs); -} - -void VISIBLE16 -handle_sercon(struct bregs *regs) -{ - if (!CONFIG_SERCON) - return; - if (!GET_LOW(sercon_port)) - return; - - switch (regs->ah) { - case 0x01: - case 0x02: - case 0x03: - case 0x08: - case 0x0f: - if (sercon_splitmode()) - /* nothing, vgabios handles it */ - return; - } - - switch (regs->ah) { - case 0x00: sercon_1000(regs); break; - case 0x01: sercon_1001(regs); break; - case 0x02: sercon_1002(regs); break; - case 0x03: sercon_1003(regs); break; - case 0x06: sercon_1006(regs); break; - case 0x08: sercon_1008(regs); break; - case 0x09: sercon_1009(regs); break; - case 0x0e: sercon_100e(regs); break; - case 0x0f: sercon_100f(regs); break; - case 0x4f: sercon_104f(regs); break; - default: sercon_10XX(regs); break; - } -} - -void sercon_setup(void) -{ - if (!CONFIG_SERCON) - return; - - struct segoff_s seabios, vgabios; - u16 addr; - - addr = romfile_loadint("etc/sercon-port", 0); - if (!addr) - return; - dprintf(1, "sercon: using ioport 0x%x\n", addr); - - if (CONFIG_DEBUG_SERIAL) - if (addr == CONFIG_DEBUG_SERIAL_PORT) - ScreenAndDebug = 0; - - vgabios = GET_IVT(0x10); - seabios = FUNC16(entry_10); - if (vgabios.seg != seabios.seg || - vgabios.offset != seabios.offset) { - dprintf(1, "sercon: configuring in splitmode (vgabios %04x:%04x)\n", - vgabios.seg, vgabios.offset); - sercon_real_vga_handler = vgabios; - SET_LOW(sercon_split, 1); - } else { - dprintf(1, "sercon: configuring as primary display\n"); - sercon_real_vga_handler = seabios; - } - - SET_IVT(0x10, FUNC16(entry_sercon)); - SET_LOW(sercon_port, addr); - outb(0x03, addr + SEROFF_LCR); // 8N1 - outb(0x01, addr + 0x02); // enable fifo -} - -/**************************************************************** - * serial input - ****************************************************************/ - -VARLOW u8 rx_buf[16]; -VARLOW u8 rx_bytes; - -static VAR16 struct { - char seq[4]; - u8 len; - u16 keycode; -} termseq[] = { - { .seq = "OP", .len = 2, .keycode = 0x3b00 }, // F1 - { .seq = "OQ", .len = 2, .keycode = 0x3c00 }, // F2 - { .seq = "OR", .len = 2, .keycode = 0x3d00 }, // F3 - { .seq = "OS", .len = 2, .keycode = 0x3e00 }, // F4 - - { .seq = "[15~", .len = 4, .keycode = 0x3f00 }, // F5 - { .seq = "[17~", .len = 4, .keycode = 0x4000 }, // F6 - { .seq = "[18~", .len = 4, .keycode = 0x4100 }, // F7 - { .seq = "[19~", .len = 4, .keycode = 0x4200 }, // F8 - { .seq = "[20~", .len = 4, .keycode = 0x4300 }, // F9 - { .seq = "[21~", .len = 4, .keycode = 0x4400 }, // F10 - { .seq = "[23~", .len = 4, .keycode = 0x5700 }, // F11 - { .seq = "[24~", .len = 4, .keycode = 0x5800 }, // F12 - - { .seq = "[2~", .len = 3, .keycode = 0x52e0 }, // insert - { .seq = "[3~", .len = 3, .keycode = 0x53e0 }, // delete - { .seq = "[5~", .len = 3, .keycode = 0x49e0 }, // page up - { .seq = "[6~", .len = 3, .keycode = 0x51e0 }, // page down - - { .seq = "[A", .len = 2, .keycode = 0x48e0 }, // up - { .seq = "[B", .len = 2, .keycode = 0x50e0 }, // down - { .seq = "[C", .len = 2, .keycode = 0x4de0 }, // right - { .seq = "[D", .len = 2, .keycode = 0x4be0 }, // left - - { .seq = "[H", .len = 2, .keycode = 0x47e0 }, // home - { .seq = "[F", .len = 2, .keycode = 0x4fe0 }, // end -}; - -static void shiftbuf(int remove) -{ - int i, remaining; - - remaining = GET_LOW(rx_bytes) - remove; - SET_LOW(rx_bytes, remaining); - for (i = 0; i < remaining; i++) - SET_LOW(rx_buf[i], GET_LOW(rx_buf[i + remove])); -} - -static int cmpbuf(int seq) -{ - int chr, len; - - len = GET_GLOBAL(termseq[seq].len); - if (GET_LOW(rx_bytes) < len + 1) - return 0; - for (chr = 0; chr < len; chr++) - if (GET_GLOBAL(termseq[seq].seq[chr]) != GET_LOW(rx_buf[chr + 1])) - return 0; - return 1; -} - -static int findseq(void) -{ - int seq; - - for (seq = 0; seq < ARRAY_SIZE(termseq); seq++) - if (cmpbuf(seq)) - return seq; - return -1; -} - -void -sercon_check_event(void) -{ - if (!CONFIG_SERCON) - return; - - u16 addr = GET_LOW(sercon_port); - u16 keycode; - u8 byte, count = 0; - int seq, chr; - - // check to see if there is a active serial port - if (!addr) - return; - if (inb(addr + SEROFF_LSR) == 0xFF) - return; - - // flush pending output - sercon_lazy_flush(); - - // read all available data - while (inb(addr + SEROFF_LSR) & 0x01) { - byte = inb(addr + SEROFF_DATA); - if (GET_LOW(rx_bytes) < sizeof(rx_buf)) { - SET_LOW(rx_buf[rx_bytes], byte); - SET_LOW(rx_bytes, GET_LOW(rx_bytes) + 1); - count++; - } - } - - for (;;) { - // no (more) input data - if (!GET_LOW(rx_bytes)) - return; - - // lookup escape sequences - if (GET_LOW(rx_bytes) > 1 && GET_LOW(rx_buf[0]) == 0x1b) { - seq = findseq(); - if (seq >= 0) { - enqueue_key(GET_GLOBAL(termseq[seq].keycode)); - shiftbuf(GET_GLOBAL(termseq[seq].len) + 1); - continue; - } - } - - // Seems we got a escape sequence we didn't recognise. - // -> If we received data wait for more, maybe it is just incomplete. - if (GET_LOW(rx_buf[0]) == 0x1b && count) - return; - - // Handle input as individual char. - chr = GET_LOW(rx_buf[0]); - keycode = ascii_to_keycode(chr); - if (keycode) - enqueue_key(keycode); - shiftbuf(1); - } -} diff --git a/payloads/external/SeaBIOS/src/serial.c b/payloads/external/SeaBIOS/src/serial.c deleted file mode 100644 index 88349c8a..00000000 --- a/payloads/external/SeaBIOS/src/serial.c +++ /dev/null @@ -1,317 +0,0 @@ -// 16bit code to handle serial and printer services. -// -// Copyright (C) 2008,2009 Kevin O'Connor <kevin@koconnor.net> -// Copyright (C) 2002 MandrakeSoft S.A. -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "biosvar.h" // SET_BDA -#include "bregs.h" // struct bregs -#include "hw/serialio.h" // SEROFF_IER -#include "output.h" // debug_enter -#include "romfile.h" // romfile_loadint -#include "stacks.h" // yield -#include "util.h" // serial_setup - - -/**************************************************************** - * COM ports - ****************************************************************/ - -static u16 -detect_serial(u16 port, u8 timeout, u8 count) -{ - if (CONFIG_DEBUG_SERIAL && port == CONFIG_DEBUG_SERIAL_PORT - && !romfile_loadint("etc/advertise-serial-debug-port", 1)) - return 0; - outb(0x02, port+SEROFF_IER); - u8 ier = inb(port+SEROFF_IER); - if (ier != 0x02) - return 0; - u8 iir = inb(port+SEROFF_IIR); - if ((iir & 0x3f) != 0x02) - return 0; - - outb(0x00, port+SEROFF_IER); - SET_BDA(port_com[count], port); - SET_BDA(com_timeout[count], timeout); - return 1; -} - -void -serial_setup(void) -{ - if (! CONFIG_SERIAL) - return; - dprintf(3, "init serial\n"); - - u16 count = 0; - count += detect_serial(PORT_SERIAL1, 0x0a, count); - count += detect_serial(PORT_SERIAL2, 0x0a, count); - count += detect_serial(PORT_SERIAL3, 0x0a, count); - count += detect_serial(PORT_SERIAL4, 0x0a, count); - dprintf(1, "Found %d serial ports\n", count); - - // Equipment word bits 9..11 determing # serial ports - set_equipment_flags(0xe00, count << 9); -} - -static u16 -getComAddr(struct bregs *regs) -{ - if (regs->dx >= 4) { - set_invalid(regs); - return 0; - } - u16 addr = GET_BDA(port_com[regs->dx]); - if (! addr) - set_invalid(regs); - return addr; -} - -// SERIAL - INITIALIZE PORT -static void -handle_1400(struct bregs *regs) -{ - u16 addr = getComAddr(regs); - if (!addr) - return; - outb(inb(addr+SEROFF_LCR) | 0x80, addr+SEROFF_LCR); - if ((regs->al & 0xE0) == 0) { - outb(0x17, addr+SEROFF_DLL); - outb(0x04, addr+SEROFF_DLH); - } else { - u16 val16 = 0x600 >> ((regs->al & 0xE0) >> 5); - outb(val16 & 0xFF, addr+SEROFF_DLL); - outb(val16 >> 8, addr+SEROFF_DLH); - } - outb(regs->al & 0x1F, addr+SEROFF_LCR); - regs->ah = inb(addr+SEROFF_LSR); - regs->al = inb(addr+SEROFF_MSR); - set_success(regs); -} - -// SERIAL - WRITE CHARACTER TO PORT -static void -handle_1401(struct bregs *regs) -{ - u16 addr = getComAddr(regs); - if (!addr) - return; - u32 end = irqtimer_calc_ticks(GET_BDA(com_timeout[regs->dx])); - for (;;) { - u8 lsr = inb(addr+SEROFF_LSR); - if ((lsr & 0x60) == 0x60) { - // Success - can write data - outb(regs->al, addr+SEROFF_DATA); - // XXX - reread lsr? - regs->ah = lsr; - break; - } - if (irqtimer_check(end)) { - // Timed out - can't write data. - regs->ah = lsr | 0x80; - break; - } - yield(); - } - set_success(regs); -} - -// SERIAL - READ CHARACTER FROM PORT -static void -handle_1402(struct bregs *regs) -{ - u16 addr = getComAddr(regs); - if (!addr) - return; - u32 end = irqtimer_calc_ticks(GET_BDA(com_timeout[regs->dx])); - for (;;) { - u8 lsr = inb(addr+SEROFF_LSR); - if (lsr & 0x01) { - // Success - can read data - regs->al = inb(addr+SEROFF_DATA); - regs->ah = lsr; - break; - } - if (irqtimer_check(end)) { - // Timed out - can't read data. - regs->ah = lsr | 0x80; - break; - } - yield(); - } - set_success(regs); -} - -// SERIAL - GET PORT STATUS -static void -handle_1403(struct bregs *regs) -{ - u16 addr = getComAddr(regs); - if (!addr) - return; - regs->ah = inb(addr+SEROFF_LSR); - regs->al = inb(addr+SEROFF_MSR); - set_success(regs); -} - -static void -handle_14XX(struct bregs *regs) -{ - set_unimplemented(regs); -} - -// INT 14h Serial Communications Service Entry Point -void VISIBLE16 -handle_14(struct bregs *regs) -{ - debug_enter(regs, DEBUG_HDL_14); - if (! CONFIG_SERIAL) { - handle_14XX(regs); - return; - } - - switch (regs->ah) { - case 0x00: handle_1400(regs); break; - case 0x01: handle_1401(regs); break; - case 0x02: handle_1402(regs); break; - case 0x03: handle_1403(regs); break; - default: handle_14XX(regs); break; - } -} - - -/**************************************************************** - * LPT ports - ****************************************************************/ - -static u16 -detect_parport(u16 port, u8 timeout, u8 count) -{ - // clear input mode - outb(inb(port+2) & 0xdf, port+2); - - outb(0xaa, port); - if (inb(port) != 0xaa) - // Not present - return 0; - SET_BDA(port_lpt[count], port); - SET_BDA(lpt_timeout[count], timeout); - return 1; -} - -void -lpt_setup(void) -{ - if (! CONFIG_LPT) - return; - dprintf(3, "init lpt\n"); - - u16 count = 0; - count += detect_parport(PORT_LPT1, 0x14, count); - count += detect_parport(PORT_LPT2, 0x14, count); - dprintf(1, "Found %d lpt ports\n", count); - - // Equipment word bits 14..15 determing # parallel ports - set_equipment_flags(0xc000, count << 14); -} - -static u16 -getLptAddr(struct bregs *regs) -{ - if (regs->dx >= 3) { - set_invalid(regs); - return 0; - } - u16 addr = GET_BDA(port_lpt[regs->dx]); - if (! addr) - set_invalid(regs); - return addr; -} - -// INT 17 - PRINTER - WRITE CHARACTER -static void -handle_1700(struct bregs *regs) -{ - u16 addr = getLptAddr(regs); - if (!addr) - return; - - u32 end = irqtimer_calc_ticks(GET_BDA(lpt_timeout[regs->dx])); - - outb(regs->al, addr); - u8 val8 = inb(addr+2); - outb(val8 | 0x01, addr+2); // send strobe - udelay(5); - outb(val8 & ~0x01, addr+2); - - for (;;) { - u8 v = inb(addr+1); - if (!(v & 0x40)) { - // Success - regs->ah = v ^ 0x48; - break; - } - if (irqtimer_check(end)) { - // Timeout - regs->ah = (v ^ 0x48) | 0x01; - break; - } - yield(); - } - - set_success(regs); -} - -// INT 17 - PRINTER - INITIALIZE PORT -static void -handle_1701(struct bregs *regs) -{ - u16 addr = getLptAddr(regs); - if (!addr) - return; - - u8 val8 = inb(addr+2); - outb(val8 & ~0x04, addr+2); // send init - udelay(5); - outb(val8 | 0x04, addr+2); - - regs->ah = inb(addr+1) ^ 0x48; - set_success(regs); -} - -// INT 17 - PRINTER - GET STATUS -static void -handle_1702(struct bregs *regs) -{ - u16 addr = getLptAddr(regs); - if (!addr) - return; - regs->ah = inb(addr+1) ^ 0x48; - set_success(regs); -} - -static void -handle_17XX(struct bregs *regs) -{ - set_unimplemented(regs); -} - -// INT17h : Printer Service Entry Point -void VISIBLE16 -handle_17(struct bregs *regs) -{ - debug_enter(regs, DEBUG_HDL_17); - if (! CONFIG_LPT) { - handle_17XX(regs); - return; - } - - switch (regs->ah) { - case 0x00: handle_1700(regs); break; - case 0x01: handle_1701(regs); break; - case 0x02: handle_1702(regs); break; - default: handle_17XX(regs); break; - } -} diff --git a/payloads/external/SeaBIOS/src/sha.h b/payloads/external/SeaBIOS/src/sha.h deleted file mode 100644 index edc9437e..00000000 --- a/payloads/external/SeaBIOS/src/sha.h +++ /dev/null @@ -1,11 +0,0 @@ -#ifndef __SHA_H -#define __SHA_H - -#include "types.h" // u32 - -void sha1(const u8 *data, u32 length, u8 *hash); -void sha256(const u8 *data, u32 length, u8 *hash); -void sha384(const u8 *data, u32 length, u8 *hash); -void sha512(const u8 *data, u32 length, u8 *hash); - -#endif // sha.h diff --git a/payloads/external/SeaBIOS/src/sha1.c b/payloads/external/SeaBIOS/src/sha1.c deleted file mode 100644 index e6d80c80..00000000 --- a/payloads/external/SeaBIOS/src/sha1.c +++ /dev/null @@ -1,147 +0,0 @@ -// Support for Calculation of SHA1 in SW -// -// Copyright (C) 2006-2011 IBM Corporation -// -// Authors: -// Stefan Berger <stefanb@linux.vnet.ibm.com> -// -// This file may be distributed under the terms of the GNU LGPLv3 license. -// -// See: http://www.itl.nist.gov/fipspubs/fip180-1.htm -// RFC3174, Wikipedia's SHA1 alogrithm description -// - -#include "config.h" -#include "byteorder.h" // cpu_to_*, __swab64 -#include "sha.h" // sha1 -#include "string.h" // memcpy -#include "x86.h" // rol - -typedef struct _sha1_ctx { - u32 h[5]; -} sha1_ctx; - - -static void -sha1_block(u32 *w, sha1_ctx *ctx) -{ - u32 i; - u32 a,b,c,d,e,f; - u32 tmp; - u32 idx; - - static const u32 sha_ko[4] = { - 0x5a827999, 0x6ed9eba1, 0x8f1bbcdc, 0xca62c1d6 }; - - /* change endianness of given data */ - for (i = 0; i < 16; i++) - w[i] = be32_to_cpu(w[i]); - - for (i = 16; i <= 79; i++) { - tmp = w[i-3] ^ w[i-8] ^ w[i-14] ^ w[i-16]; - w[i] = rol(tmp,1); - } - - a = ctx->h[0]; - b = ctx->h[1]; - c = ctx->h[2]; - d = ctx->h[3]; - e = ctx->h[4]; - - for (i = 0; i <= 79; i++) { - if (i <= 19) { - f = (b & c) | ((b ^ 0xffffffff) & d); - idx = 0; - } else if (i <= 39) { - f = b ^ c ^ d; - idx = 1; - } else if (i <= 59) { - f = (b & c) | (b & d) | (c & d); - idx = 2; - } else { - f = b ^ c ^ d; - idx = 3; - } - - tmp = rol(a, 5) + - f + - e + - sha_ko[idx] + - w[i]; - e = d; - d = c; - c = rol(b, 30); - b = a; - a = tmp; - } - - ctx->h[0] += a; - ctx->h[1] += b; - ctx->h[2] += c; - ctx->h[3] += d; - ctx->h[4] += e; -} - - -static void -sha1_do(sha1_ctx *ctx, const u8 *data32, u32 length) -{ - u32 offset; - u16 num; - u32 bits = 0; - u32 w[80]; - u64 tmp; - - /* treat data in 64-byte chunks */ - for (offset = 0; length - offset >= 64; offset += 64) { - memcpy(w, data32 + offset, 64); - sha1_block((u32 *)w, ctx); - bits += (64 * 8); - } - - /* last block with less than 64 bytes */ - num = length - offset; - bits += (num << 3); - - memcpy(w, data32 + offset, num); - ((u8 *)w)[num] = 0x80; - if (64 - (num + 1) > 0) - memset( &((u8 *)w)[num + 1], 0x0, 64 - (num + 1)); - - if (num >= 56) { - /* cannot append number of bits here */ - sha1_block((u32 *)w, ctx); - memset(w, 0x0, 60); - } - - /* write number of bits to end of block */ - tmp = __swab64(bits); - memcpy(&w[14], &tmp, 8); - - sha1_block(w, ctx); - - /* need to switch result's endianness */ - for (num = 0; num < 5; num++) - ctx->h[num] = cpu_to_be32(ctx->h[num]); -} - - -void -sha1(const u8 *data, u32 length, u8 *hash) -{ - if (!CONFIG_TCGBIOS) - return; - - sha1_ctx ctx = { - .h[0] = 0x67452301, - .h[1] = 0xefcdab89, - .h[2] = 0x98badcfe, - .h[3] = 0x10325476, - .h[4] = 0xc3d2e1f0, - }; - - sha1_do(&ctx, data, length); - memcpy(hash, &ctx.h[0], 20); - - return; -} diff --git a/payloads/external/SeaBIOS/src/sha256.c b/payloads/external/SeaBIOS/src/sha256.c deleted file mode 100644 index 72c3df83..00000000 --- a/payloads/external/SeaBIOS/src/sha256.c +++ /dev/null @@ -1,211 +0,0 @@ -/***************************************************************************** - * Copyright (c) 2015-2020 IBM Corporation - * All rights reserved. - * This program and the accompanying materials - * are made available under the terms of the BSD License - * which accompanies this distribution, and is available at - * http://www.opensource.org/licenses/bsd-license.php - * - * Contributors: - * IBM Corporation - initial implementation - *****************************************************************************/ - -/* - * See: NIST standard for SHA-256 in FIPS PUB 180-4 - */ - -#include "config.h" -#include "byteorder.h" -#include "sha.h" -#include "string.h" -#include "x86.h" - -typedef struct _sha256_ctx { - u32 h[8]; -} sha256_ctx; - -static inline u32 Ch(u32 x, u32 y, u32 z) -{ - return (x & y) | ((x ^ 0xffffffff) & z); -} - -static inline u32 Maj(u32 x, u32 y, u32 z) -{ - return (x & y) | (x & z) | (y & z); -} - -static inline u32 sum0(u32 x) -{ - return ror(x, 2) ^ ror(x, 13) ^ ror(x, 22); -} - -static inline u32 sum1(u32 x) -{ - return ror(x, 6) ^ ror(x, 11) ^ ror(x, 25); -} - -static inline u32 sigma0(u32 x) -{ - return ror(x, 7) ^ ror(x, 18) ^ (x >> 3); -} - -static inline u32 sigma1(u32 x) -{ - return ror(x, 17) ^ ror(x, 19) ^ (x >> 10); -} - -static void sha256_block(u32 *w, sha256_ctx *ctx) -{ - u32 t; - u32 a, b, c, d, e, f, g, h; - u32 T1, T2; - - /* - * FIPS 180-4 4.2.2: SHA256 Constants - */ - static const u32 sha_ko[64] = { - 0x428a2f98, 0x71374491, 0xb5c0fbcf, 0xe9b5dba5, - 0x3956c25b, 0x59f111f1, 0x923f82a4, 0xab1c5ed5, - 0xd807aa98, 0x12835b01, 0x243185be, 0x550c7dc3, - 0x72be5d74, 0x80deb1fe, 0x9bdc06a7, 0xc19bf174, - 0xe49b69c1, 0xefbe4786, 0x0fc19dc6, 0x240ca1cc, - 0x2de92c6f, 0x4a7484aa, 0x5cb0a9dc, 0x76f988da, - 0x983e5152, 0xa831c66d, 0xb00327c8, 0xbf597fc7, - 0xc6e00bf3, 0xd5a79147, 0x06ca6351, 0x14292967, - 0x27b70a85, 0x2e1b2138, 0x4d2c6dfc, 0x53380d13, - 0x650a7354, 0x766a0abb, 0x81c2c92e, 0x92722c85, - 0xa2bfe8a1, 0xa81a664b, 0xc24b8b70, 0xc76c51a3, - 0xd192e819, 0xd6990624, 0xf40e3585, 0x106aa070, - 0x19a4c116, 0x1e376c08, 0x2748774c, 0x34b0bcb5, - 0x391c0cb3, 0x4ed8aa4a, 0x5b9cca4f, 0x682e6ff3, - 0x748f82ee, 0x78a5636f, 0x84c87814, 0x8cc70208, - 0x90befffa, 0xa4506ceb, 0xbef9a3f7, 0xc67178f2 - }; - - /* - * FIPS 180-4 6.2.2: step 1 - * - * 0 <= i <= 15: - * W(t) = M(t) - * 16 <= i <= 63: - * W(t) = sigma1(W(t-2)) + W(t-7) + sigma0(W(t-15)) + W(t-16) - */ - - /* w(0)..w(15) are in big endian format */ - for (t = 0; t <= 15; t++) - w[t] = be32_to_cpu(w[t]); - - for (t = 16; t <= 63; t++) - w[t] = sigma1(w[t-2]) + w[t-7] + sigma0(w[t-15]) + w[t-16]; - - /* - * step 2: a = H0, b = H1, c = H2, d = H3, e = H4, f = H5, g = H6, h = H7 - */ - a = ctx->h[0]; - b = ctx->h[1]; - c = ctx->h[2]; - d = ctx->h[3]; - e = ctx->h[4]; - f = ctx->h[5]; - g = ctx->h[6]; - h = ctx->h[7]; - - /* - * step 3: For i = 0 to 63: - * T1 = h + sum1(e) + Ch(e,f,g) + K(t) + W(t); - * T2 = sum0(a) + Maj(a,b,c) - * h = g; g = f; f = e; e = d + T1; d = c; c = b; b = a; a + T1 + T2 - */ - for (t = 0; t <= 63; t++) { - T1 = h + sum1(e) + Ch(e, f, g) + sha_ko[t] + w[t]; - T2 = sum0(a) + Maj(a, b, c); - h = g; - g = f; - f = e; - e = d + T1; - d = c; - c = b; - b = a; - a = T1 + T2; - } - - /* - * step 4: - * H0 = a + H0, H1 = b + H1, H2 = c + H2, H3 = d + H3, H4 = e + H4 - */ - ctx->h[0] += a; - ctx->h[1] += b; - ctx->h[2] += c; - ctx->h[3] += d; - ctx->h[4] += e; - ctx->h[5] += f; - ctx->h[6] += g; - ctx->h[7] += h; -} - -static void sha256_do(sha256_ctx *ctx, const u8 *data32, u32 length) -{ - u32 offset; - u16 num; - u32 bits = 0; - u32 w[64]; - u64 tmp; - - /* treat data in 64-byte chunks */ - for (offset = 0; length - offset >= 64; offset += 64) { - memcpy(w, data32 + offset, 64); - sha256_block((u32 *)w, ctx); - bits += (64 * 8); - } - - /* last block with less than 64 bytes */ - num = length - offset; - bits += (num << 3); - - memcpy(w, data32 + offset, num); - /* - * FIPS 180-4 5.1: Padding the Message - */ - ((u8 *)w)[num] = 0x80; - if (64 - (num + 1) > 0) - memset( &((u8 *)w)[num + 1], 0, 64 - (num + 1)); - - if (num >= 56) { - /* cannot append number of bits here */ - sha256_block((u32 *)w, ctx); - memset(w, 0, 60); - } - - /* write number of bits to end of block */ - tmp = cpu_to_be64(bits); - memcpy(&w[14], &tmp, 8); - - sha256_block(w, ctx); - - /* need to switch result's endianness */ - for (num = 0; num < 8; num++) - ctx->h[num] = cpu_to_be32(ctx->h[num]); -} - -void sha256(const u8 *data, u32 length, u8 *hash) -{ - sha256_ctx ctx = { - .h = { - /* - * FIPS 180-4: 6.2.1 - * -> 5.3.3: initial hash value - */ - 0x6a09e667, - 0xbb67ae85, - 0x3c6ef372, - 0xa54ff53a, - 0x510e527f, - 0x9b05688c, - 0x1f83d9ab, - 0x5be0cd19 - } - }; - - sha256_do(&ctx, data, length); - memcpy(hash, ctx.h, sizeof(ctx.h)); -} diff --git a/payloads/external/SeaBIOS/src/sha512.c b/payloads/external/SeaBIOS/src/sha512.c deleted file mode 100644 index fddd9fa7..00000000 --- a/payloads/external/SeaBIOS/src/sha512.c +++ /dev/null @@ -1,244 +0,0 @@ -/***************************************************************************** - * Copyright (c) 2021 IBM Corporation - * All rights reserved. - * This program and the accompanying materials - * are made available under the terms of the BSD License - * which accompanies this distribution, and is available at - * http://www.opensource.org/licenses/bsd-license.php - * - * Contributors: - * IBM Corporation - initial implementation - *****************************************************************************/ - -/* - * See: NIST standard for SHA-512 and SHA-384 in FIPS PUB 180-4 & RFC 6234 - */ - -#include "config.h" -#include "byteorder.h" -#include "sha.h" -#include "string.h" - -typedef struct _sha512_ctx { - u64 h[8]; -} sha512_ctx; - -static inline u64 ror64(u64 x, u8 n) -{ - return (x >> n) | (x << (64 - n)); -} - -static inline u64 Ch64(u64 x, u64 y, u64 z) -{ - return (x & y) ^ ((x ^ 0xffffffffffffffffULL) & z); -} - -static inline u64 Maj64(u64 x, u64 y, u64 z) -{ - return (x & y) ^ (x & z) ^ (y & z); -} - -static inline u64 sum0_64(u64 x) -{ - return ror64(x, 28) ^ ror64(x, 34) ^ ror64(x, 39); -} - -static inline u64 sum1_64(u64 x) -{ - return ror64(x, 14) ^ ror64(x, 18) ^ ror64(x, 41); -} - -static inline u64 sigma0_64(u64 x) -{ - return ror64(x, 1) ^ ror64(x, 8) ^ (x >> 7); -} - -static inline u64 sigma1_64(u64 x) -{ - return ror64(x, 19) ^ ror64(x, 61) ^ (x >> 6); -} - -static void sha512_block(u64 *w, sha512_ctx *ctx) -{ - u32 t; - u64 a, b, c, d, e, f, g, h; - u64 T1, T2; - - /* - * FIPS 180-4 4.2.2: SHA512 Constants - */ - static const u64 sha_ko[80] = { - 0x428a2f98d728ae22, 0x7137449123ef65cd, 0xb5c0fbcfec4d3b2f, 0xe9b5dba58189dbbc, - 0x3956c25bf348b538, 0x59f111f1b605d019, 0x923f82a4af194f9b, 0xab1c5ed5da6d8118, - 0xd807aa98a3030242, 0x12835b0145706fbe, 0x243185be4ee4b28c, 0x550c7dc3d5ffb4e2, - 0x72be5d74f27b896f, 0x80deb1fe3b1696b1, 0x9bdc06a725c71235, 0xc19bf174cf692694, - 0xe49b69c19ef14ad2, 0xefbe4786384f25e3, 0x0fc19dc68b8cd5b5, 0x240ca1cc77ac9c65, - 0x2de92c6f592b0275, 0x4a7484aa6ea6e483, 0x5cb0a9dcbd41fbd4, 0x76f988da831153b5, - 0x983e5152ee66dfab, 0xa831c66d2db43210, 0xb00327c898fb213f, 0xbf597fc7beef0ee4, - 0xc6e00bf33da88fc2, 0xd5a79147930aa725, 0x06ca6351e003826f, 0x142929670a0e6e70, - 0x27b70a8546d22ffc, 0x2e1b21385c26c926, 0x4d2c6dfc5ac42aed, 0x53380d139d95b3df, - 0x650a73548baf63de, 0x766a0abb3c77b2a8, 0x81c2c92e47edaee6, 0x92722c851482353b, - 0xa2bfe8a14cf10364, 0xa81a664bbc423001, 0xc24b8b70d0f89791, 0xc76c51a30654be30, - 0xd192e819d6ef5218, 0xd69906245565a910, 0xf40e35855771202a, 0x106aa07032bbd1b8, - 0x19a4c116b8d2d0c8, 0x1e376c085141ab53, 0x2748774cdf8eeb99, 0x34b0bcb5e19b48a8, - 0x391c0cb3c5c95a63, 0x4ed8aa4ae3418acb, 0x5b9cca4f7763e373, 0x682e6ff3d6b2b8a3, - 0x748f82ee5defb2fc, 0x78a5636f43172f60, 0x84c87814a1f0ab72, 0x8cc702081a6439ec, - 0x90befffa23631e28, 0xa4506cebde82bde9, 0xbef9a3f7b2c67915, 0xc67178f2e372532b, - 0xca273eceea26619c, 0xd186b8c721c0c207, 0xeada7dd6cde0eb1e, 0xf57d4f7fee6ed178, - 0x06f067aa72176fba, 0x0a637dc5a2c898a6, 0x113f9804bef90dae, 0x1b710b35131c471b, - 0x28db77f523047d84, 0x32caab7b40c72493, 0x3c9ebe0a15c9bebc, 0x431d67c49c100d4c, - 0x4cc5d4becb3e42b6, 0x597f299cfc657e2a, 0x5fcb6fab3ad6faec, 0x6c44198c4a475817 - }; - - /* - * FIPS 180-4 6.4.2: step 1 - * - * 0 <= i <= 15: - * W(t) = M(t) - * 16 <= i <= 79: - * W(t) = sigma1(W(t-2)) + W(t-7) + sigma0(W(t-15)) + W(t-16) - */ - - /* w(0)..w(15) are in big endian format */ - for (t = 0; t <= 15; t++) - w[t] = be64_to_cpu(w[t]); - - for (t = 16; t <= 79; t++) - w[t] = sigma1_64(w[t-2]) + w[t-7] + sigma0_64(w[t-15]) + w[t-16]; - - /* - * step 2: a = H0, b = H1, c = H2, d = H3, e = H4, f = H5, g = H6, h = H7 - */ - a = ctx->h[0]; - b = ctx->h[1]; - c = ctx->h[2]; - d = ctx->h[3]; - e = ctx->h[4]; - f = ctx->h[5]; - g = ctx->h[6]; - h = ctx->h[7]; - - /* - * step 3: For i = 0 to 79: - * T1 = h + sum1(e) + Ch(e,f,g) + K(t) + W(t); - * T2 = sum0(a) + Maj(a,b,c) - * h = g; g = f; f = e; e = d + T1; d = c; c = b; b = a; a + T1 + T2 - */ - for (t = 0; t <= 79; t++) { - T1 = h + sum1_64(e) + Ch64(e, f, g) + sha_ko[t] + w[t]; - T2 = sum0_64(a) + Maj64(a, b, c); - h = g; - g = f; - f = e; - e = d + T1; - d = c; - c = b; - b = a; - a = T1 + T2; - } - - /* - * step 4: - * H0 = a + H0, H1 = b + H1, H2 = c + H2, H3 = d + H3, H4 = e + H4 - */ - ctx->h[0] += a; - ctx->h[1] += b; - ctx->h[2] += c; - ctx->h[3] += d; - ctx->h[4] += e; - ctx->h[5] += f; - ctx->h[6] += g; - ctx->h[7] += h; -} - -static void sha512_do(sha512_ctx *ctx, const u8 *data32, u32 length) -{ - u32 offset; - u16 num; - u64 bits = 0; - u64 w[80]; - u64 tmp; - - /* treat data in 128-byte/1024 bit chunks */ - for (offset = 0; length - offset >= 128; offset += 128) { - memcpy(w, data32 + offset, 128); - sha512_block(w, ctx); - bits += (128 * 8); - } - - /* last block with less than 128 bytes */ - num = length - offset; - bits += (num << 3); - - memcpy(w, data32 + offset, num); - /* - * FIPS 180-4 5.1: Padding the Message - */ - ((u8 *)w)[num] = 0x80; - if (128 - (num + 1) > 0) - memset( &((u8 *)w)[num + 1], 0, 128 - (num + 1)); - - if (num >= 112) { - /* cannot append number of bits here; - * need space for 128 bits (16 bytes) - */ - sha512_block((u64 *)w, ctx); - memset(w, 0, 128); - } - - /* write number of bits to end of the block; we write 64 bits */ - tmp = cpu_to_be64(bits); - memcpy(&w[15], &tmp, 8); - - sha512_block(w, ctx); - - /* need to switch result's endianness */ - for (num = 0; num < 8; num++) - ctx->h[num] = cpu_to_be64(ctx->h[num]); -} - -void sha384(const u8 *data, u32 length, u8 *hash) -{ - sha512_ctx ctx = { - .h = { - /* - * FIPS 180-4: 6.2.1 - * -> 5.3.4: initial hash value - */ - 0xcbbb9d5dc1059ed8, - 0x629a292a367cd507, - 0x9159015a3070dd17, - 0x152fecd8f70e5939, - 0x67332667ffc00b31, - 0x8eb44a8768581511, - 0xdb0c2e0d64f98fa7, - 0x47b5481dbefa4fa4 - } - }; - - sha512_do(&ctx, data, length); - memcpy(hash, ctx.h, 384/8); -} - -void sha512(const u8 *data, u32 length, u8 *hash) -{ - sha512_ctx ctx = { - .h = { - /* - * FIPS 180-4: 6.2.1 - * -> 5.3.5: initial hash value - */ - 0x6a09e667f3bcc908, - 0xbb67ae8584caa73b, - 0x3c6ef372fe94f82b, - 0xa54ff53a5f1d36f1, - 0x510e527fade682d1, - 0x9b05688c2b3e6c1f, - 0x1f83d9abfb41bd6b, - 0x5be0cd19137e2179 - } - }; - - sha512_do(&ctx, data, length); - memcpy(hash, ctx.h, sizeof(ctx.h)); -} diff --git a/payloads/external/SeaBIOS/src/stacks.c b/payloads/external/SeaBIOS/src/stacks.c deleted file mode 100644 index 4c8e5df6..00000000 --- a/payloads/external/SeaBIOS/src/stacks.c +++ /dev/null @@ -1,776 +0,0 @@ -// Code for manipulating stack locations. -// -// Copyright (C) 2009-2015 Kevin O'Connor <kevin@koconnor.net> -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "biosvar.h" // GET_GLOBAL -#include "bregs.h" // CR0_PE -#include "fw/paravirt.h" // PORT_SMI_CMD -#include "hw/rtc.h" // rtc_use -#include "list.h" // hlist_node -#include "malloc.h" // free -#include "output.h" // dprintf -#include "romfile.h" // romfile_loadint -#include "stacks.h" // struct mutex_s -#include "string.h" // memset -#include "util.h" // useRTC - -#define MAIN_STACK_MAX (1024*1024) - - -/**************************************************************** - * 16bit / 32bit calling - ****************************************************************/ - -struct { - u8 method; - u8 cmosindex; - u8 a20; - u16 ss, fs, gs; - u32 cr0; - struct descloc_s gdt; -} Call16Data VARLOW; - -#define C16_BIG 1 -#define C16_SMM 2 - -int HaveSmmCall32 VARFSEG; - -// Backup state in preparation for call32 -static int -call32_prep(u8 method) -{ - if (!CONFIG_CALL32_SMM || method != C16_SMM) { - // Backup cr0 - u32 cr0 = cr0_read(); - if (cr0 & CR0_PE) - // Called in 16bit protected mode?! - return -1; - SET_LOW(Call16Data.cr0, cr0); - - // Backup fs/gs and gdt - SET_LOW(Call16Data.fs, GET_SEG(FS)); - SET_LOW(Call16Data.gs, GET_SEG(GS)); - struct descloc_s gdt; - sgdt(&gdt); - SET_LOW(Call16Data.gdt.length, gdt.length); - SET_LOW(Call16Data.gdt.addr, gdt.addr); - - // Enable a20 and backup its previous state - SET_LOW(Call16Data.a20, set_a20(1)); - } - - // Backup ss - SET_LOW(Call16Data.ss, GET_SEG(SS)); - - // Backup cmos index register and disable nmi - u8 cmosindex = inb(PORT_CMOS_INDEX); - if (!(cmosindex & NMI_DISABLE_BIT)) { - outb(cmosindex | NMI_DISABLE_BIT, PORT_CMOS_INDEX); - inb(PORT_CMOS_DATA); - } - SET_LOW(Call16Data.cmosindex, cmosindex); - - SET_LOW(Call16Data.method, method); - return 0; -} - -// Restore state backed up during call32 -static u8 -call32_post(void) -{ - u8 method = GET_LOW(Call16Data.method); - SET_LOW(Call16Data.method, 0); - SET_LOW(Call16Data.ss, 0); - - if (!CONFIG_CALL32_SMM || method != C16_SMM) { - // Restore a20 - u8 a20 = GET_LOW(Call16Data.a20); - if (!a20) - set_a20(0); - - // Restore gdt and fs/gs - struct descloc_s gdt; - gdt.length = GET_LOW(Call16Data.gdt.length); - gdt.addr = GET_LOW(Call16Data.gdt.addr); - lgdt(&gdt); - SET_SEG(FS, GET_LOW(Call16Data.fs)); - SET_SEG(GS, GET_LOW(Call16Data.gs)); - - // Restore cr0 - u32 cr0_caching = GET_LOW(Call16Data.cr0) & (CR0_CD|CR0_NW); - if (cr0_caching) - cr0_mask(CR0_CD|CR0_NW, cr0_caching); - } - - // Restore cmos index register - u8 cmosindex = GET_LOW(Call16Data.cmosindex); - if (!(cmosindex & NMI_DISABLE_BIT)) { - outb(cmosindex, PORT_CMOS_INDEX); - inb(PORT_CMOS_DATA); - } - return method; -} - -// Force next call16() to restore to a pristine cpu environment state -static void -call16_override(int big) -{ - ASSERT32FLAT(); - if (getesp() > BUILD_STACK_ADDR) - panic("call16_override with invalid stack\n"); - memset(&Call16Data, 0, sizeof(Call16Data)); - if (big) { - Call16Data.method = C16_BIG; - Call16Data.a20 = 1; - } else { - Call16Data.a20 = !CONFIG_DISABLE_A20; - } -} - -// 16bit handler code called from call16() / call16_smm() -u32 VISIBLE16 -call16_helper(u32 eax, u32 edx, u32 (*func)(u32 eax, u32 edx)) -{ - u8 method = call32_post(); - u32 ret = func(eax, edx); - call32_prep(method); - return ret; -} - -#define ASM32_SWITCH16 " .pushsection .text.32fseg." UNIQSEC "\n .code16\n" -#define ASM32_BACK32 " .popsection\n .code32\n" -#define ASM16_SWITCH32 " .code32\n" -#define ASM16_BACK16 " .code16gcc\n" - -// Call a SeaBIOS C function in 32bit mode using smm trampoline -static u32 -call32_smm(void *func, u32 eax) -{ - ASSERT16(); - dprintf(9, "call32_smm %p %x\n", func, eax); - call32_prep(C16_SMM); - u32 bkup_esp; - asm volatile( - // Backup esp / set esp to flat stack location - " movl %%esp, %0\n" - " movl %%ss, %%eax\n" - " shll $4, %%eax\n" - " addl %%eax, %%esp\n" - - // Transition to 32bit mode, call func, return to 16bit - " movl $" __stringify(CALL32SMM_CMDID) ", %%eax\n" - " movl $" __stringify(CALL32SMM_ENTERID) ", %%ecx\n" - " movl $(" __stringify(BUILD_BIOS_ADDR) " + 1f), %%ebx\n" - " outb %%al, $" __stringify(PORT_SMI_CMD) "\n" - " rep; nop\n" - " hlt\n" - - ASM16_SWITCH32 - "1:movl %1, %%eax\n" - " calll *%2\n" - " movl %%eax, %1\n" - - " movl $" __stringify(CALL32SMM_CMDID) ", %%eax\n" - " movl $" __stringify(CALL32SMM_RETURNID) ", %%ecx\n" - " movl $2f, %%ebx\n" - " outb %%al, $" __stringify(PORT_SMI_CMD) "\n" - " rep; nop\n" - " hlt\n" - - // Restore esp - ASM16_BACK16 - "2:movl %0, %%esp\n" - : "=&r" (bkup_esp), "+r" (eax) - : "r" (func) - : "eax", "ecx", "edx", "ebx", "cc", "memory"); - call32_post(); - - dprintf(9, "call32_smm done %p %x\n", func, eax); - return eax; -} - -static u32 -call16_smm(u32 eax, u32 edx, void *func) -{ - ASSERT32FLAT(); - if (!CONFIG_CALL32_SMM) - return eax; - func -= BUILD_BIOS_ADDR; - dprintf(9, "call16_smm %p %x %x\n", func, eax, edx); - u32 stackoffset = Call16Data.ss << 4; - asm volatile( - // Restore esp - " subl %0, %%esp\n" - - // Transition to 16bit mode, call func, return to 32bit - " movl $" __stringify(CALL32SMM_CMDID) ", %%eax\n" - " movl $" __stringify(CALL32SMM_RETURNID) ", %%ecx\n" - " movl $(1f - " __stringify(BUILD_BIOS_ADDR) "), %%ebx\n" - " outb %%al, $" __stringify(PORT_SMI_CMD) "\n" - " rep; nop\n" - " hlt\n" - - ASM32_SWITCH16 - "1:movl %1, %%eax\n" - " movl %3, %%ecx\n" - " calll _cfunc16_call16_helper\n" - " movl %%eax, %1\n" - - " movl $" __stringify(CALL32SMM_CMDID) ", %%eax\n" - " movl $" __stringify(CALL32SMM_ENTERID) ", %%ecx\n" - " movl $2f, %%ebx\n" - " outb %%al, $" __stringify(PORT_SMI_CMD) "\n" - " rep; nop\n" - " hlt\n" - - // Set esp to flat stack location - ASM32_BACK32 - "2:addl %0, %%esp\n" - : "+r" (stackoffset), "+r" (eax), "+d" (edx) - : "r" (func) - : "eax", "ecx", "ebx", "cc", "memory"); - return eax; -} - -// Call a 32bit SeaBIOS function from a 16bit SeaBIOS function. -u32 VISIBLE16 -__call32(void *func, u32 eax, u32 errret) -{ - ASSERT16(); - if (CONFIG_CALL32_SMM && GET_GLOBAL(HaveSmmCall32)) - return call32_smm(func, eax); - // Jump direclty to 32bit mode - this clobbers the 16bit segment - // selector registers. - int ret = call32_prep(C16_BIG); - if (ret) - return errret; - u32 bkup_ss, bkup_esp; - asm volatile( - // Backup ss/esp / set esp to flat stack location - " movl %%ss, %0\n" - " movl %%esp, %1\n" - " shll $4, %0\n" - " addl %0, %%esp\n" - " shrl $4, %0\n" - - // Transition to 32bit mode, call func, return to 16bit - " movl $(" __stringify(BUILD_BIOS_ADDR) " + 1f), %%edx\n" - " jmp transition32_nmi_off\n" - ASM16_SWITCH32 - "1:calll *%3\n" - " movl $2f, %%edx\n" - " jmp transition16big\n" - - // Restore ds/ss/esp - ASM16_BACK16 - "2:movl %0, %%ds\n" - " movl %0, %%ss\n" - " movl %1, %%esp\n" - : "=&r" (bkup_ss), "=&r" (bkup_esp), "+a" (eax) - : "r" (func) - : "ecx", "edx", "cc", "memory"); - call32_post(); - return eax; -} - -// Call a 16bit SeaBIOS function, restoring the mode from last call32(). -static u32 -call16(u32 eax, u32 edx, void *func) -{ - ASSERT32FLAT(); - if (getesp() > MAIN_STACK_MAX) - panic("call16 with invalid stack\n"); - if (CONFIG_CALL32_SMM && Call16Data.method == C16_SMM) - return call16_smm(eax, edx, func); - - extern void transition16big(void); - extern void transition16(void); - void *thunk = transition16; - if (Call16Data.method == C16_BIG || in_post()) - thunk = transition16big; - func -= BUILD_BIOS_ADDR; - u32 stackseg = Call16Data.ss; - asm volatile( - // Transition to 16bit mode - " movl $(1f - " __stringify(BUILD_BIOS_ADDR) "), %%edx\n" - " jmp *%%ecx\n" - // Setup ss/esp and call func - ASM32_SWITCH16 - "1:movl %2, %%ecx\n" - " shll $4, %2\n" - " movw %%cx, %%ss\n" - " subl %2, %%esp\n" - " movw %%cx, %%ds\n" - " movl %4, %%edx\n" - " movl %3, %%ecx\n" - " calll _cfunc16_call16_helper\n" - // Return to 32bit and restore esp - " movl $2f, %%edx\n" - " jmp transition32_nmi_off\n" - ASM32_BACK32 - "2:addl %2, %%esp\n" - : "+a" (eax), "+c"(thunk), "+r"(stackseg) - : "r" (func), "r" (edx) - : "edx", "cc", "memory"); - return eax; -} - - -/**************************************************************** - * Extra 16bit stack - ****************************************************************/ - -// Space for a stack for 16bit code. -u8 ExtraStack[BUILD_EXTRA_STACK_SIZE+1] VARLOW __aligned(8); -u8 *StackPos VARLOW; - -// Test if currently on the extra stack -int -on_extra_stack(void) -{ - return MODE16 && GET_SEG(SS) == SEG_LOW && getesp() > (u32)ExtraStack; -} - -// Switch to the extra stack and call a function. -u32 -__stack_hop(u32 eax, u32 edx, void *func) -{ - if (on_extra_stack()) - return ((u32 (*)(u32, u32))func)(eax, edx); - ASSERT16(); - u16 stack_seg = SEG_LOW; - u32 bkup_ss, bkup_esp; - asm volatile( - // Backup current %ss/%esp values. - "movw %%ss, %w3\n" - "movl %%esp, %4\n" - // Copy stack seg to %ds/%ss and set %esp - "movw %w6, %%ds\n" - "movw %w6, %%ss\n" - "movl %5, %%esp\n" - "pushl %3\n" - "pushl %4\n" - // Call func - "calll *%2\n" - "popl %4\n" - "popl %3\n" - // Restore segments and stack - "movw %w3, %%ds\n" - "movw %w3, %%ss\n" - "movl %4, %%esp" - : "+a" (eax), "+d" (edx), "+c" (func), "=&r" (bkup_ss), "=&r" (bkup_esp) - : "m" (StackPos), "r" (stack_seg) - : "cc", "memory"); - return eax; -} - -// Switch back to original caller's stack and call a function. -u32 -__stack_hop_back(u32 eax, u32 edx, void *func) -{ - if (!MODESEGMENT) - return call16(eax, edx, func); - if (!MODE16 || !on_extra_stack()) - return ((u32 (*)(u32, u32))func)(eax, edx); - ASSERT16(); - u16 bkup_ss; - u32 bkup_stack_pos, temp; - asm volatile( - // Backup stack_pos and current %ss/%esp - "movl %6, %4\n" - "movw %%ss, %w3\n" - "movl %%esp, %6\n" - // Restore original callers' %ss/%esp - "movl -4(%4), %5\n" - "movl %5, %%ss\n" - "movw %%ds:-8(%4), %%sp\n" - "movl %5, %%ds\n" - // Call func - "calll *%2\n" - // Restore %ss/%esp and stack_pos - "movw %w3, %%ds\n" - "movw %w3, %%ss\n" - "movl %6, %%esp\n" - "movl %4, %6" - : "+a" (eax), "+d" (edx), "+c" (func), "=&r" (bkup_ss) - , "=&r" (bkup_stack_pos), "=&r" (temp), "+m" (StackPos) - : - : "cc", "memory"); - return eax; -} - - -/**************************************************************** - * External 16bit interface calling - ****************************************************************/ - -// Far call 16bit code with a specified register state. -void VISIBLE16 -_farcall16(struct bregs *callregs, u16 callregseg) -{ - if (need_hop_back()) { - stack_hop_back(_farcall16, callregs, callregseg); - return; - } - ASSERT16(); - asm volatile( - "calll __farcall16\n" - : "+a" (callregs), "+m" (*callregs), "+d" (callregseg) - : - : "ebx", "ecx", "esi", "edi", "cc", "memory"); -} - -// Invoke external 16bit code. -void -farcall16(struct bregs *callregs) -{ - call16_override(0); - _farcall16(callregs, 0); -} - -// Invoke external 16bit code in "big real" mode. -void -farcall16big(struct bregs *callregs) -{ - call16_override(1); - _farcall16(callregs, 0); -} - -// Invoke a 16bit software interrupt. -void -__call16_int(struct bregs *callregs, u16 offset) -{ - callregs->code.offset = offset; - if (!MODESEGMENT) { - callregs->code.seg = SEG_BIOS; - _farcall16((void*)callregs - Call16Data.ss * 16, Call16Data.ss); - return; - } - callregs->code.seg = GET_SEG(CS); - _farcall16(callregs, GET_SEG(SS)); -} - -// Reset the machine -void -reset(void) -{ - extern void reset_vector(void) __noreturn; - if (!MODE16) - call16(0, 0, reset_vector); - reset_vector(); -} - - -/**************************************************************** - * Threads - ****************************************************************/ - -// Thread info - stored at bottom of each thread stack - don't change -// without also updating the inline assembler below. -struct thread_info { - void *stackpos; - struct hlist_node node; -}; -struct thread_info MainThread VARFSEG = { - NULL, { &MainThread.node, &MainThread.node.next } -}; -#define THREADSTACKSIZE 4096 - -// Check if any threads are running. -static int -have_threads(void) -{ - return (CONFIG_THREADS - && GET_FLATPTR(MainThread.node.next) != &MainThread.node); -} - -// Return the 'struct thread_info' for the currently running thread. -struct thread_info * -getCurThread(void) -{ - u32 esp = getesp(); - if (esp <= MAIN_STACK_MAX) - return &MainThread; - return (void*)ALIGN_DOWN(esp, THREADSTACKSIZE); -} - -static u8 CanInterrupt, ThreadControl; - -// Initialize the support for internal threads. -void -thread_setup(void) -{ - CanInterrupt = 1; - call16_override(1); - if (! CONFIG_THREADS) - return; - ThreadControl = romfile_loadint("etc/threads", 1); -} - -// Should hardware initialization threads run during optionrom execution. -int -threads_during_optionroms(void) -{ - return CONFIG_THREADS && CONFIG_RTC_TIMER && ThreadControl == 2 && in_post(); -} - -// Switch to next thread stack. -static void -switch_next(struct thread_info *cur) -{ - struct thread_info *next = container_of( - cur->node.next, struct thread_info, node); - if (cur == next) - // Nothing to do. - return; - asm volatile( - " pushl $1f\n" // store return pc - " pushl %%ebp\n" // backup %ebp - " movl %%esp, (%%eax)\n" // cur->stackpos = %esp - " movl (%%ecx), %%esp\n" // %esp = next->stackpos - " popl %%ebp\n" // restore %ebp - " retl\n" // restore pc - "1:\n" - : "+a"(cur), "+c"(next) - : - : "ebx", "edx", "esi", "edi", "cc", "memory"); -} - -// Last thing called from a thread (called on MainThread stack). -static void -__end_thread(struct thread_info *old) -{ - hlist_del(&old->node); - dprintf(DEBUG_thread, "\\%08x/ End thread\n", (u32)old); - free(old); - if (!have_threads()) - dprintf(1, "All threads complete.\n"); -} - -void VISIBLE16 check_irqs(void); - -// Create a new thread and start executing 'func' in it. -void -run_thread(void (*func)(void*), void *data) -{ - ASSERT32FLAT(); - if (! CONFIG_THREADS || ! ThreadControl) - goto fail; - struct thread_info *thread; - thread = memalign_tmphigh(THREADSTACKSIZE, THREADSTACKSIZE); - if (!thread) - goto fail; - - dprintf(DEBUG_thread, "/%08x\\ Start thread\n", (u32)thread); - thread->stackpos = (void*)thread + THREADSTACKSIZE; - struct thread_info *cur = getCurThread(); - struct thread_info *edx = cur; - hlist_add_after(&thread->node, &cur->node); - asm volatile( - // Start thread - " pushl $1f\n" // store return pc - " pushl %%ebp\n" // backup %ebp - " movl %%esp, (%%edx)\n" // cur->stackpos = %esp - " movl (%%ebx), %%esp\n" // %esp = thread->stackpos - " calll *%%ecx\n" // Call func - - // End thread - " movl %%ebx, %%eax\n" // %eax = thread - " movl 4(%%ebx), %%ebx\n" // %ebx = thread->node.next - " movl (%5), %%esp\n" // %esp = MainThread.stackpos - " calll %4\n" // call __end_thread(thread) - " movl -4(%%ebx), %%esp\n" // %esp = next->stackpos - " popl %%ebp\n" // restore %ebp - " retl\n" // restore pc - "1:\n" - : "+a"(data), "+c"(func), "+b"(thread), "+d"(edx) - : "m"(*(u8*)__end_thread), "m"(MainThread) - : "esi", "edi", "cc", "memory"); - if (cur == &MainThread) - // Permit irqs to fire - check_irqs(); - return; - -fail: - func(data); -} - - -/**************************************************************** - * Thread helpers - ****************************************************************/ - -// Low-level irq enable. -void VISIBLE16 -check_irqs(void) -{ - if (!MODESEGMENT && !CanInterrupt) { - // Can't enable interrupts (PIC and/or IVT not yet setup) - cpu_relax(); - return; - } - if (need_hop_back()) { - stack_hop_back(check_irqs, 0, 0); - return; - } - if (MODE16) - clock_poll_irq(); - asm volatile("sti ; nop ; rep ; nop ; cli ; cld" : : :"memory"); -} - -// Briefly permit irqs to occur. -void -yield(void) -{ - if (MODESEGMENT || !CONFIG_THREADS) { - check_irqs(); - return; - } - struct thread_info *cur = getCurThread(); - // Switch to the next thread - switch_next(cur); - if (cur == &MainThread) - // Permit irqs to fire - check_irqs(); -} - -void VISIBLE16 -wait_irq(void) -{ - if (need_hop_back()) { - stack_hop_back(wait_irq, 0, 0); - return; - } - asm volatile("sti ; hlt ; cli ; cld": : :"memory"); -} - -// Wait for next irq to occur. -void -yield_toirq(void) -{ - if (!CONFIG_HARDWARE_IRQ - || (!MODESEGMENT && (have_threads() || !CanInterrupt))) { - // Threads still active or irqs not available - do a yield instead. - yield(); - return; - } - wait_irq(); -} - -// Wait for all threads (other than the main thread) to complete. -void -wait_threads(void) -{ - ASSERT32FLAT(); - while (have_threads()) - yield(); -} - -void -mutex_lock(struct mutex_s *mutex) -{ - ASSERT32FLAT(); - if (! CONFIG_THREADS) - return; - while (mutex->isLocked) - yield(); - mutex->isLocked = 1; -} - -void -mutex_unlock(struct mutex_s *mutex) -{ - ASSERT32FLAT(); - if (! CONFIG_THREADS) - return; - mutex->isLocked = 0; -} - - -/**************************************************************** - * Thread preemption - ****************************************************************/ - -int CanPreempt VARFSEG; -static u32 PreemptCount; - -// Turn on RTC irqs and arrange for them to check the 32bit threads. -void -start_preempt(void) -{ - if (! threads_during_optionroms()) - return; - CanPreempt = 1; - PreemptCount = 0; - rtc_use(); -} - -// Turn off RTC irqs / stop checking for thread execution. -void -finish_preempt(void) -{ - if (! threads_during_optionroms()) { - yield(); - return; - } - CanPreempt = 0; - rtc_release(); - dprintf(9, "Done preempt - %d checks\n", PreemptCount); - yield(); -} - -// Check if preemption is on, and wait for it to complete if so. -int -wait_preempt(void) -{ - if (MODESEGMENT || !CONFIG_THREADS || !CanPreempt - || getesp() < MAIN_STACK_MAX) - return 0; - while (CanPreempt) - yield(); - return 1; -} - -// Try to execute 32bit threads. -void VISIBLE32INIT -yield_preempt(void) -{ - PreemptCount++; - switch_next(&MainThread); -} - -// 16bit code that checks if threads are pending and executes them if so. -void -check_preempt(void) -{ - if (CONFIG_THREADS && GET_GLOBAL(CanPreempt) && have_threads()) - call32(yield_preempt, 0, 0); -} - - -/**************************************************************** - * call32 helper - ****************************************************************/ - -struct call32_params_s { - void *func; - u32 eax, edx, ecx; -}; - -u32 VISIBLE32FLAT -call32_params_helper(struct call32_params_s *params) -{ - return ((u32 (*)(u32, u32, u32))params->func)( - params->eax, params->edx, params->ecx); -} - -u32 -__call32_params(void *func, u32 eax, u32 edx, u32 ecx, u32 errret) -{ - ASSERT16(); - struct call32_params_s params = {func, eax, edx, ecx}; - return call32(call32_params_helper, MAKE_FLATPTR(GET_SEG(SS), ¶ms) - , errret); -} diff --git a/payloads/external/SeaBIOS/src/stacks.h b/payloads/external/SeaBIOS/src/stacks.h deleted file mode 100644 index c71bdc8e..00000000 --- a/payloads/external/SeaBIOS/src/stacks.h +++ /dev/null @@ -1,68 +0,0 @@ -// Misc function and variable declarations. -#ifndef __STACKS_H -#define __STACKS_H - -#include "types.h" // u32 - -#define CALL32SMM_CMDID 0xb5 -#define CALL32SMM_ENTERID 0x1234 -#define CALL32SMM_RETURNID 0x5678 - -// stacks.c -extern int HaveSmmCall32; -u32 __call32(void *func, u32 eax, u32 errret); -#define call32(func, eax, errret) ({ \ - extern void _cfunc32flat_ ##func (void); \ - __call32( _cfunc32flat_ ##func , (u32)(eax), (errret)); \ - }) -extern u8 ExtraStack[], *StackPos; -u32 __stack_hop(u32 eax, u32 edx, void *func); -#define stack_hop(func, eax, edx) \ - __stack_hop((u32)(eax), (u32)(edx), (func)) -u32 __stack_hop_back(u32 eax, u32 edx, void *func); -#define stack_hop_back(func, eax, edx) ({ \ - extern void _cfunc16_ ##func (void); \ - __stack_hop_back((u32)(eax), (u32)(edx), _cfunc16_ ##func ); \ - }) -int on_extra_stack(void); -struct bregs; -void farcall16(struct bregs *callregs); -void farcall16big(struct bregs *callregs); -void __call16_int(struct bregs *callregs, u16 offset); -#define call16_int(nr, callregs) do { \ - extern void irq_trampoline_ ##nr (void); \ - __call16_int((callregs), (u32)&irq_trampoline_ ##nr ); \ - } while (0) -void reset(void); -extern struct thread_info MainThread; -struct thread_info *getCurThread(void); -void yield(void); -void yield_toirq(void); -void thread_setup(void); -int threads_during_optionroms(void); -void run_thread(void (*func)(void*), void *data); -void wait_threads(void); -struct mutex_s { u32 isLocked; }; -void mutex_lock(struct mutex_s *mutex); -void mutex_unlock(struct mutex_s *mutex); -void start_preempt(void); -void finish_preempt(void); -int wait_preempt(void); -void check_preempt(void); -u32 __call32_params(void *func, u32 eax, u32 edx, u32 ecx, u32 errret); -#define call32_params(func, eax, edx, ecx, errret) ({ \ - extern void _cfunc32flat_ ##func (void); \ - __call32_params( _cfunc32flat_ ##func , (u32)(eax), (u32)(edx) \ - , (u32)(ecx), (errret)); \ - }) - -// Inline functions - -// Check if a call to stack_hop_back is needed. -static inline int -need_hop_back(void) -{ - return !MODESEGMENT || on_extra_stack(); -} - -#endif // stacks.h diff --git a/payloads/external/SeaBIOS/src/std/LegacyBios.h b/payloads/external/SeaBIOS/src/std/LegacyBios.h deleted file mode 100644 index 5170c378..00000000 --- a/payloads/external/SeaBIOS/src/std/LegacyBios.h +++ /dev/null @@ -1,985 +0,0 @@ -/** @file - The EFI Legacy BIOS Protocol is used to abstract legacy Option ROM usage - under EFI and Legacy OS boot. This file also includes all the related - COMPATIBILIY16 structures and defintions. - - Note: The names for EFI_IA32_REGISTER_SET elements were picked to follow - well known naming conventions. - - Thunk is the code that switches from 32-bit protected environment into the 16-bit real-mode - environment. Reverse thunk is the code that does the opposite. - -Copyright (c) 2007 - 2010, Intel Corporation. All rights reserved.<BR> -This program and the accompanying materials are licensed and made available under -the terms and conditions of the BSD License that accompanies this distribution. -The full text of the license may be found at -http://opensource.org/licenses/bsd-license.php. - -THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. - - @par Revision Reference: - This protocol is defined in Framework for EFI Compatibility Support Module spec - Version 0.97. - -**/ - -#ifndef _EFI_LEGACY_BIOS_H_ -#define _EFI_LEGACY_BIOS_H_ - -/// -/// -/// -#pragma pack(1) - -typedef UINT8 SERIAL_MODE; -typedef UINT8 PARALLEL_MODE; - -#define EFI_COMPATIBILITY16_TABLE_SIGNATURE SIGNATURE_32 ('I', 'F', 'E', '$') - -/// -/// There is a table located within the traditional BIOS in either the 0xF000:xxxx or 0xE000:xxxx -/// physical address range. It is located on a 16-byte boundary and provides the physical address of the -/// entry point for the Compatibility16 functions. These functions provide the platform-specific -/// information that is required by the generic EfiCompatibility code. The functions are invoked via -/// thunking by using EFI_LEGACY_BIOS_PROTOCOL.FarCall86() with the 32-bit physical -/// entry point. -/// -typedef struct { - /// - /// The string "$EFI" denotes the start of the EfiCompatibility table. Byte 0 is "I," byte - /// 1 is "F," byte 2 is "E," and byte 3 is "$" and is normally accessed as a DWORD or UINT32. - /// - UINT32 Signature; - - /// - /// The value required such that byte checksum of TableLength equals zero. - /// - UINT8 TableChecksum; - - /// - /// The length of this table. - /// - UINT8 TableLength; - - /// - /// The major EFI revision for which this table was generated. - /// - UINT8 EfiMajorRevision; - - /// - /// The minor EFI revision for which this table was generated. - /// - UINT8 EfiMinorRevision; - - /// - /// The major revision of this table. - /// - UINT8 TableMajorRevision; - - /// - /// The minor revision of this table. - /// - UINT8 TableMinorRevision; - - /// - /// Reserved for future usage. - /// - UINT16 Reserved; - - /// - /// The segment of the entry point within the traditional BIOS for Compatibility16 functions. - /// - UINT16 Compatibility16CallSegment; - - /// - /// The offset of the entry point within the traditional BIOS for Compatibility16 functions. - /// - UINT16 Compatibility16CallOffset; - - /// - /// The segment of the entry point within the traditional BIOS for EfiCompatibility - /// to invoke the PnP installation check. - /// - UINT16 PnPInstallationCheckSegment; - - /// - /// The Offset of the entry point within the traditional BIOS for EfiCompatibility - /// to invoke the PnP installation check. - /// - UINT16 PnPInstallationCheckOffset; - - /// - /// EFI system resources table. Type EFI_SYSTEM_TABLE is defined in the IntelPlatform - ///Innovation Framework for EFI Driver Execution Environment Core Interface Specification (DXE CIS). - /// - UINT32 EfiSystemTable; - - /// - /// The address of an OEM-provided identifier string. The string is null terminated. - /// - UINT32 OemIdStringPointer; - - /// - /// The 32-bit physical address where ACPI RSD PTR is stored within the traditional - /// BIOS. The remained of the ACPI tables are located at their EFI addresses. The size - /// reserved is the maximum for ACPI 2.0. The EfiCompatibility will fill in the ACPI - /// RSD PTR with either the ACPI 1.0b or 2.0 values. - /// - UINT32 AcpiRsdPtrPointer; - - /// - /// The OEM revision number. Usage is undefined but provided for OEM module usage. - /// - UINT16 OemRevision; - - /// - /// The 32-bit physical address where INT15 E820 data is stored within the traditional - /// BIOS. The EfiCompatibility code will fill in the E820Pointer value and copy the - /// data to the indicated area. - /// - UINT32 E820Pointer; - - /// - /// The length of the E820 data and is filled in by the EfiCompatibility code. - /// - UINT32 E820Length; - - /// - /// The 32-bit physical address where the $PIR table is stored in the traditional BIOS. - /// The EfiCompatibility code will fill in the IrqRoutingTablePointer value and - /// copy the data to the indicated area. - /// - UINT32 IrqRoutingTablePointer; - - /// - /// The length of the $PIR table and is filled in by the EfiCompatibility code. - /// - UINT32 IrqRoutingTableLength; - - /// - /// The 32-bit physical address where the MP table is stored in the traditional BIOS. - /// The EfiCompatibility code will fill in the MpTablePtr value and copy the data - /// to the indicated area. - /// - UINT32 MpTablePtr; - - /// - /// The length of the MP table and is filled in by the EfiCompatibility code. - /// - UINT32 MpTableLength; - - /// - /// The segment of the OEM-specific INT table/code. - /// - UINT16 OemIntSegment; - - /// - /// The offset of the OEM-specific INT table/code. - /// - UINT16 OemIntOffset; - - /// - /// The segment of the OEM-specific 32-bit table/code. - /// - UINT16 Oem32Segment; - - /// - /// The offset of the OEM-specific 32-bit table/code. - /// - UINT16 Oem32Offset; - - /// - /// The segment of the OEM-specific 16-bit table/code. - /// - UINT16 Oem16Segment; - - /// - /// The offset of the OEM-specific 16-bit table/code. - /// - UINT16 Oem16Offset; - - /// - /// The segment of the TPM binary passed to 16-bit CSM. - /// - UINT16 TpmSegment; - - /// - /// The offset of the TPM binary passed to 16-bit CSM. - /// - UINT16 TpmOffset; - - /// - /// A pointer to a string identifying the independent BIOS vendor. - /// - UINT32 IbvPointer; - - /// - /// This field is NULL for all systems not supporting PCI Express. This field is the base - /// value of the start of the PCI Express memory-mapped configuration registers and - /// must be filled in prior to EfiCompatibility code issuing the Compatibility16 function - /// Compatibility16InitializeYourself(). - /// Compatibility16InitializeYourself() is defined in Compatability16 - /// Functions. - /// - UINT32 PciExpressBase; - - /// - /// Maximum PCI bus number assigned. - /// - UINT8 LastPciBus; - - /// - /// Start address of UMB RAM - /// - UINT32 UmaAddress; - - /// - /// Size of UMB RAM - /// - UINT32 UmaSize; - - /// - /// Start address of persistent allocation in high (>1MiB) memory - /// - UINT32 HiPermanentMemoryAddress; - - /// - /// Size of persistent allocation in high (>1MiB) memory - /// - UINT32 HiPermanentMemorySize; -} EFI_COMPATIBILITY16_TABLE; - -/// -/// Functions provided by the CSM binary which communicate between the EfiCompatibility -/// and Compatability16 code. -/// -/// Inconsistent with the specification here: -/// The member's name started with "Compatibility16" [defined in Intel Framework -/// Compatibility Support Module Specification / 0.97 version] -/// has been changed to "Legacy16" since keeping backward compatible. -/// -typedef enum { - /// - /// Causes the Compatibility16 code to do any internal initialization required. - /// Input: - /// AX = Compatibility16InitializeYourself - /// ES:BX = Pointer to EFI_TO_COMPATIBILITY16_INIT_TABLE - /// Return: - /// AX = Return Status codes - /// - Legacy16InitializeYourself = 0x0000, - - /// - /// Causes the Compatibility16 BIOS to perform any drive number translations to match the boot sequence. - /// Input: - /// AX = Compatibility16UpdateBbs - /// ES:BX = Pointer to EFI_TO_COMPATIBILITY16_BOOT_TABLE - /// Return: - /// AX = Returned status codes - /// - Legacy16UpdateBbs = 0x0001, - - /// - /// Allows the Compatibility16 code to perform any final actions before booting. The Compatibility16 - /// code is read/write. - /// Input: - /// AX = Compatibility16PrepareToBoot - /// ES:BX = Pointer to EFI_TO_COMPATIBILITY16_BOOT_TABLE structure - /// Return: - /// AX = Returned status codes - /// - Legacy16PrepareToBoot = 0x0002, - - /// - /// Causes the Compatibility16 BIOS to boot. The Compatibility16 code is Read/Only. - /// Input: - /// AX = Compatibility16Boot - /// Output: - /// AX = Returned status codes - /// - Legacy16Boot = 0x0003, - - /// - /// Allows the Compatibility16 code to get the last device from which a boot was attempted. This is - /// stored in CMOS and is the priority number of the last attempted boot device. - /// Input: - /// AX = Compatibility16RetrieveLastBootDevice - /// Output: - /// AX = Returned status codes - /// BX = Priority number of the boot device. - /// - Legacy16RetrieveLastBootDevice = 0x0004, - - /// - /// Allows the Compatibility16 code rehook INT13, INT18, and/or INT19 after dispatching a legacy OpROM. - /// Input: - /// AX = Compatibility16DispatchOprom - /// ES:BX = Pointer to EFI_DISPATCH_OPROM_TABLE - /// Output: - /// AX = Returned status codes - /// BX = Number of non-BBS-compliant devices found. Equals 0 if BBS compliant. - /// - Legacy16DispatchOprom = 0x0005, - - /// - /// Finds a free area in the 0xFxxxx or 0xExxxx region of the specified length and returns the address - /// of that region. - /// Input: - /// AX = Compatibility16GetTableAddress - /// BX = Allocation region - /// 00 = Allocate from either 0xE0000 or 0xF0000 64 KB blocks. - /// Bit 0 = 1 Allocate from 0xF0000 64 KB block - /// Bit 1 = 1 Allocate from 0xE0000 64 KB block - /// CX = Requested length in bytes. - /// DX = Required address alignment. Bit mapped. First non-zero bit from the right is the alignment. - /// Output: - /// AX = Returned status codes - /// DS:BX = Address of the region - /// - Legacy16GetTableAddress = 0x0006, - - /// - /// Enables the EfiCompatibility module to do any nonstandard processing of keyboard LEDs or state. - /// Input: - /// AX = Compatibility16SetKeyboardLeds - /// CL = LED status. - /// Bit 0 Scroll Lock 0 = Off - /// Bit 1 NumLock - /// Bit 2 Caps Lock - /// Output: - /// AX = Returned status codes - /// - Legacy16SetKeyboardLeds = 0x0007, - - /// - /// Enables the EfiCompatibility module to install an interrupt handler for PCI mass media devices that - /// do not have an OpROM associated with them. An example is SATA. - /// Input: - /// AX = Compatibility16InstallPciHandler - /// ES:BX = Pointer to EFI_LEGACY_INSTALL_PCI_HANDLER structure - /// Output: - /// AX = Returned status codes - /// - Legacy16InstallPciHandler = 0x0008 -} EFI_COMPATIBILITY_FUNCTIONS; - - -/// -/// EFI_DISPATCH_OPROM_TABLE -/// -typedef struct { - UINT16 PnPInstallationCheckSegment; ///< A pointer to the PnpInstallationCheck data structure. - UINT16 PnPInstallationCheckOffset; ///< A pointer to the PnpInstallationCheck data structure. - UINT16 OpromSegment; ///< The segment where the OpROM was placed. Offset is assumed to be 3. - UINT8 PciBus; ///< The PCI bus. - UINT8 PciDeviceFunction; ///< The PCI device * 0x08 | PCI function. - UINT8 NumberBbsEntries; ///< The number of valid BBS table entries upon entry and exit. The IBV code may - ///< increase this number, if BBS-compliant devices also hook INTs in order to force the - ///< OpROM BIOS Setup to be executed. - UINT32 BbsTablePointer; ///< A pointer to the BBS table. - UINT16 RuntimeSegment; ///< The segment where the OpROM can be relocated to. If this value is 0x0000, this - ///< means that the relocation of this run time code is not supported. - ///< Inconsistent with specification here: - ///< The member's name "OpromDestinationSegment" [defined in Intel Framework Compatibility Support Module Specification / 0.97 version] - ///< has been changed to "RuntimeSegment" since keeping backward compatible. - -} EFI_DISPATCH_OPROM_TABLE; - -/// -/// EFI_TO_COMPATIBILITY16_INIT_TABLE -/// -typedef struct { - /// - /// Starting address of memory under 1 MB. The ending address is assumed to be 640 KB or 0x9FFFF. - /// - UINT32 BiosLessThan1MB; - - /// - /// The starting address of the high memory block. - /// - UINT32 HiPmmMemory; - - /// - /// The length of high memory block. - /// - UINT32 HiPmmMemorySizeInBytes; - - /// - /// The segment of the reverse thunk call code. - /// - UINT16 ReverseThunkCallSegment; - - /// - /// The offset of the reverse thunk call code. - /// - UINT16 ReverseThunkCallOffset; - - /// - /// The number of E820 entries copied to the Compatibility16 BIOS. - /// - UINT32 NumberE820Entries; - - /// - /// The amount of usable memory above 1 MB, e.g., E820 type 1 memory. - /// - UINT32 OsMemoryAbove1Mb; - - /// - /// The start of thunk code in main memory. Memory cannot be used by BIOS or PMM. - /// - UINT32 ThunkStart; - - /// - /// The size of the thunk code. - /// - UINT32 ThunkSizeInBytes; - - /// - /// Starting address of memory under 1 MB. - /// - UINT32 LowPmmMemory; - - /// - /// The length of low Memory block. - /// - UINT32 LowPmmMemorySizeInBytes; -} EFI_TO_COMPATIBILITY16_INIT_TABLE; - -/// -/// DEVICE_PRODUCER_SERIAL. -/// -typedef struct { - UINT16 Address; ///< I/O address assigned to the serial port. - UINT8 Irq; ///< IRQ assigned to the serial port. - SERIAL_MODE Mode; ///< Mode of serial port. Values are defined below. -} DEVICE_PRODUCER_SERIAL; - -/// -/// DEVICE_PRODUCER_SERIAL's modes. -///@{ -#define DEVICE_SERIAL_MODE_NORMAL 0x00 -#define DEVICE_SERIAL_MODE_IRDA 0x01 -#define DEVICE_SERIAL_MODE_ASK_IR 0x02 -#define DEVICE_SERIAL_MODE_DUPLEX_HALF 0x00 -#define DEVICE_SERIAL_MODE_DUPLEX_FULL 0x10 -///@) - -/// -/// DEVICE_PRODUCER_PARALLEL. -/// -typedef struct { - UINT16 Address; ///< I/O address assigned to the parallel port. - UINT8 Irq; ///< IRQ assigned to the parallel port. - UINT8 Dma; ///< DMA assigned to the parallel port. - PARALLEL_MODE Mode; ///< Mode of the parallel port. Values are defined below. -} DEVICE_PRODUCER_PARALLEL; - -/// -/// DEVICE_PRODUCER_PARALLEL's modes. -///@{ -#define DEVICE_PARALLEL_MODE_MODE_OUTPUT_ONLY 0x00 -#define DEVICE_PARALLEL_MODE_MODE_BIDIRECTIONAL 0x01 -#define DEVICE_PARALLEL_MODE_MODE_EPP 0x02 -#define DEVICE_PARALLEL_MODE_MODE_ECP 0x03 -///@} - -/// -/// DEVICE_PRODUCER_FLOPPY -/// -typedef struct { - UINT16 Address; ///< I/O address assigned to the floppy. - UINT8 Irq; ///< IRQ assigned to the floppy. - UINT8 Dma; ///< DMA assigned to the floppy. - UINT8 NumberOfFloppy; ///< Number of floppies in the system. -} DEVICE_PRODUCER_FLOPPY; - -/// -/// LEGACY_DEVICE_FLAGS -/// -typedef struct { - UINT32 A20Kybd : 1; ///< A20 controller by keyboard controller. - UINT32 A20Port90 : 1; ///< A20 controlled by port 0x92. - UINT32 Reserved : 30; ///< Reserved for future usage. -} LEGACY_DEVICE_FLAGS; - -/// -/// DEVICE_PRODUCER_DATA_HEADER -/// -typedef struct { - DEVICE_PRODUCER_SERIAL Serial[4]; ///< Data for serial port x. Type DEVICE_PRODUCER_SERIAL is defined below. - DEVICE_PRODUCER_PARALLEL Parallel[3]; ///< Data for parallel port x. Type DEVICE_PRODUCER_PARALLEL is defined below. - DEVICE_PRODUCER_FLOPPY Floppy; ///< Data for floppy. Type DEVICE_PRODUCER_FLOPPY is defined below. - UINT8 MousePresent; ///< Flag to indicate if mouse is present. - LEGACY_DEVICE_FLAGS Flags; ///< Miscellaneous Boolean state information passed to CSM. -} DEVICE_PRODUCER_DATA_HEADER; - -/// -/// ATAPI_IDENTIFY -/// -typedef struct { - UINT16 Raw[256]; ///< Raw data from the IDE IdentifyDrive command. -} ATAPI_IDENTIFY; - -/// -/// HDD_INFO -/// -typedef struct { - /// - /// Status of IDE device. Values are defined below. There is one HDD_INFO structure - /// per IDE controller. The IdentifyDrive is per drive. Index 0 is master and index - /// 1 is slave. - /// - UINT16 Status; - - /// - /// PCI bus of IDE controller. - /// - UINT32 Bus; - - /// - /// PCI device of IDE controller. - /// - UINT32 Device; - - /// - /// PCI function of IDE controller. - /// - UINT32 Function; - - /// - /// Command ports base address. - /// - UINT16 CommandBaseAddress; - - /// - /// Control ports base address. - /// - UINT16 ControlBaseAddress; - - /// - /// Bus master address. - /// - UINT16 BusMasterAddress; - - UINT8 HddIrq; - - /// - /// Data that identifies the drive data; one per possible attached drive. - /// - ATAPI_IDENTIFY IdentifyDrive[2]; -} HDD_INFO; - -/// -/// HDD_INFO status bits -/// -#define HDD_PRIMARY 0x01 -#define HDD_SECONDARY 0x02 -#define HDD_MASTER_ATAPI_CDROM 0x04 -#define HDD_SLAVE_ATAPI_CDROM 0x08 -#define HDD_MASTER_IDE 0x20 -#define HDD_SLAVE_IDE 0x40 -#define HDD_MASTER_ATAPI_ZIPDISK 0x10 -#define HDD_SLAVE_ATAPI_ZIPDISK 0x80 - -/// -/// BBS_STATUS_FLAGS;\. -/// -typedef struct { - UINT16 OldPosition : 4; ///< Prior priority. - UINT16 Reserved1 : 4; ///< Reserved for future use. - UINT16 Enabled : 1; ///< If 0, ignore this entry. - UINT16 Failed : 1; ///< 0 = Not known if boot failure occurred. - ///< 1 = Boot attempted failed. - - /// - /// State of media present. - /// 00 = No bootable media is present in the device. - /// 01 = Unknown if a bootable media present. - /// 10 = Media is present and appears bootable. - /// 11 = Reserved. - /// - UINT16 MediaPresent : 2; - UINT16 Reserved2 : 4; ///< Reserved for future use. -} BBS_STATUS_FLAGS; - -/// -/// BBS_TABLE, device type values & boot priority values. -/// -typedef struct { - /// - /// The boot priority for this boot device. Values are defined below. - /// - UINT16 BootPriority; - - /// - /// The PCI bus for this boot device. - /// - UINT32 Bus; - - /// - /// The PCI device for this boot device. - /// - UINT32 Device; - - /// - /// The PCI function for the boot device. - /// - UINT32 Function; - - /// - /// The PCI class for this boot device. - /// - UINT8 Class; - - /// - /// The PCI Subclass for this boot device. - /// - UINT8 SubClass; - - /// - /// Segment:offset address of an ASCIIZ description string describing the manufacturer. - /// - UINT16 MfgStringOffset; - - /// - /// Segment:offset address of an ASCIIZ description string describing the manufacturer. - /// - UINT16 MfgStringSegment; - - /// - /// BBS device type. BBS device types are defined below. - /// - UINT16 DeviceType; - - /// - /// Status of this boot device. Type BBS_STATUS_FLAGS is defined below. - /// - BBS_STATUS_FLAGS StatusFlags; - - /// - /// Segment:Offset address of boot loader for IPL devices or install INT13 handler for - /// BCV devices. - /// - UINT16 BootHandlerOffset; - - /// - /// Segment:Offset address of boot loader for IPL devices or install INT13 handler for - /// BCV devices. - /// - UINT16 BootHandlerSegment; - - /// - /// Segment:offset address of an ASCIIZ description string describing this device. - /// - UINT16 DescStringOffset; - - /// - /// Segment:offset address of an ASCIIZ description string describing this device. - /// - UINT16 DescStringSegment; - - /// - /// Reserved. - /// - UINT32 InitPerReserved; - - /// - /// The use of these fields is IBV dependent. They can be used to flag that an OpROM - /// has hooked the specified IRQ. The OpROM may be BBS compliant as some SCSI - /// BBS-compliant OpROMs also hook IRQ vectors in order to run their BIOS Setup - /// - UINT32 AdditionalIrq13Handler; - - /// - /// The use of these fields is IBV dependent. They can be used to flag that an OpROM - /// has hooked the specified IRQ. The OpROM may be BBS compliant as some SCSI - /// BBS-compliant OpROMs also hook IRQ vectors in order to run their BIOS Setup - /// - UINT32 AdditionalIrq18Handler; - - /// - /// The use of these fields is IBV dependent. They can be used to flag that an OpROM - /// has hooked the specified IRQ. The OpROM may be BBS compliant as some SCSI - /// BBS-compliant OpROMs also hook IRQ vectors in order to run their BIOS Setup - /// - UINT32 AdditionalIrq19Handler; - - /// - /// The use of these fields is IBV dependent. They can be used to flag that an OpROM - /// has hooked the specified IRQ. The OpROM may be BBS compliant as some SCSI - /// BBS-compliant OpROMs also hook IRQ vectors in order to run their BIOS Setup - /// - UINT32 AdditionalIrq40Handler; - UINT8 AssignedDriveNumber; - UINT32 AdditionalIrq41Handler; - UINT32 AdditionalIrq46Handler; - UINT32 IBV1; - UINT32 IBV2; -} BBS_TABLE; - -/// -/// BBS device type values -///@{ -#define BBS_FLOPPY 0x01 -#define BBS_HARDDISK 0x02 -#define BBS_CDROM 0x03 -#define BBS_PCMCIA 0x04 -#define BBS_USB 0x05 -#define BBS_EMBED_NETWORK 0x06 -#define BBS_BEV_DEVICE 0x80 -#define BBS_UNKNOWN 0xff -///@} - -/// -/// BBS boot priority values -///@{ -#define BBS_DO_NOT_BOOT_FROM 0xFFFC -#define BBS_LOWEST_PRIORITY 0xFFFD -#define BBS_UNPRIORITIZED_ENTRY 0xFFFE -#define BBS_IGNORE_ENTRY 0xFFFF -///@} - -/// -/// SMM_ATTRIBUTES -/// -typedef struct { - /// - /// Access mechanism used to generate the soft SMI. Defined types are below. The other - /// values are reserved for future usage. - /// - UINT16 Type : 3; - - /// - /// The size of "port" in bits. Defined values are below. - /// - UINT16 PortGranularity : 3; - - /// - /// The size of data in bits. Defined values are below. - /// - UINT16 DataGranularity : 3; - - /// - /// Reserved for future use. - /// - UINT16 Reserved : 7; -} SMM_ATTRIBUTES; - -/// -/// SMM_ATTRIBUTES type values. -///@{ -#define STANDARD_IO 0x00 -#define STANDARD_MEMORY 0x01 -///@} - -/// -/// SMM_ATTRIBUTES port size constants. -///@{ -#define PORT_SIZE_8 0x00 -#define PORT_SIZE_16 0x01 -#define PORT_SIZE_32 0x02 -#define PORT_SIZE_64 0x03 -///@} - -/// -/// SMM_ATTRIBUTES data size constants. -///@{ -#define DATA_SIZE_8 0x00 -#define DATA_SIZE_16 0x01 -#define DATA_SIZE_32 0x02 -#define DATA_SIZE_64 0x03 -///@} - -/// -/// SMM_FUNCTION & relating constants. -/// -typedef struct { - UINT16 Function : 15; - UINT16 Owner : 1; -} SMM_FUNCTION; - -/// -/// SMM_FUNCTION Function constants. -///@{ -#define INT15_D042 0x0000 -#define GET_USB_BOOT_INFO 0x0001 -#define DMI_PNP_50_57 0x0002 -///@} - -/// -/// SMM_FUNCTION Owner constants. -///@{ -#define STANDARD_OWNER 0x0 -#define OEM_OWNER 0x1 -///@} - -/// -/// This structure assumes both port and data sizes are 1. SmmAttribute must be -/// properly to reflect that assumption. -/// -typedef struct { - /// - /// Describes the access mechanism, SmmPort, and SmmData sizes. Type - /// SMM_ATTRIBUTES is defined below. - /// - SMM_ATTRIBUTES SmmAttributes; - - /// - /// Function Soft SMI is to perform. Type SMM_FUNCTION is defined below. - /// - SMM_FUNCTION SmmFunction; - - /// - /// SmmPort size depends upon SmmAttributes and ranges from2 bytes to 16 bytes. - /// - UINT8 SmmPort; - - /// - /// SmmData size depends upon SmmAttributes and ranges from2 bytes to 16 bytes. - /// - UINT8 SmmData; -} SMM_ENTRY; - -/// -/// SMM_TABLE -/// -typedef struct { - UINT16 NumSmmEntries; ///< Number of entries represented by SmmEntry. - SMM_ENTRY SmmEntry; ///< One entry per function. Type SMM_ENTRY is defined below. -} SMM_TABLE; - -/// -/// UDC_ATTRIBUTES -/// -typedef struct { - /// - /// This bit set indicates that the ServiceAreaData is valid. - /// - UINT8 DirectoryServiceValidity : 1; - - /// - /// This bit set indicates to use the Reserve Area Boot Code Address (RACBA) only if - /// DirectoryServiceValidity is 0. - /// - UINT8 RabcaUsedFlag : 1; - - /// - /// This bit set indicates to execute hard disk diagnostics. - /// - UINT8 ExecuteHddDiagnosticsFlag : 1; - - /// - /// Reserved for future use. Set to 0. - /// - UINT8 Reserved : 5; -} UDC_ATTRIBUTES; - -/// -/// UD_TABLE -/// -typedef struct { - /// - /// This field contains the bit-mapped attributes of the PARTIES information. Type - /// UDC_ATTRIBUTES is defined below. - /// - UDC_ATTRIBUTES Attributes; - - /// - /// This field contains the zero-based device on which the selected - /// ServiceDataArea is present. It is 0 for master and 1 for the slave device. - /// - UINT8 DeviceNumber; - - /// - /// This field contains the zero-based index into the BbsTable for the parent device. - /// This index allows the user to reference the parent device information such as PCI - /// bus, device function. - /// - UINT8 BbsTableEntryNumberForParentDevice; - - /// - /// This field contains the zero-based index into the BbsTable for the boot entry. - /// - UINT8 BbsTableEntryNumberForBoot; - - /// - /// This field contains the zero-based index into the BbsTable for the HDD diagnostics entry. - /// - UINT8 BbsTableEntryNumberForHddDiag; - - /// - /// The raw Beer data. - /// - UINT8 BeerData[128]; - - /// - /// The raw data of selected service area. - /// - UINT8 ServiceAreaData[64]; -} UD_TABLE; - -#define EFI_TO_LEGACY_MAJOR_VERSION 0x02 -#define EFI_TO_LEGACY_MINOR_VERSION 0x00 -#define MAX_IDE_CONTROLLER 8 - -/// -/// EFI_TO_COMPATIBILITY16_BOOT_TABLE -/// -typedef struct { - UINT16 MajorVersion; ///< The EfiCompatibility major version number. - UINT16 MinorVersion; ///< The EfiCompatibility minor version number. - UINT32 AcpiTable; ///< The location of the RSDT ACPI table. < 4G range. - UINT32 SmbiosTable; ///< The location of the SMBIOS table in EFI memory. < 4G range. - UINT32 SmbiosTableLength; - // - // Legacy SIO state - // - DEVICE_PRODUCER_DATA_HEADER SioData; ///< Standard traditional device information. - UINT16 DevicePathType; ///< The default boot type. - UINT16 PciIrqMask; ///< Mask of which IRQs have been assigned to PCI. - UINT32 NumberE820Entries; ///< Number of E820 entries. The number can change from the - ///< Compatibility16InitializeYourself() function. - // - // Controller & Drive Identify[2] per controller information - // - HDD_INFO HddInfo[MAX_IDE_CONTROLLER]; ///< Hard disk drive information, including raw Identify Drive data. - UINT32 NumberBbsEntries; ///< Number of entries in the BBS table - UINT32 BbsTable; ///< A pointer to the BBS table. Type BBS_TABLE is defined below. - UINT32 SmmTable; ///< A pointer to the SMM table. Type SMM_TABLE is defined below. - UINT32 OsMemoryAbove1Mb; ///< The amount of usable memory above 1 MB, i.e. E820 type 1 memory. This value can - ///< differ from the value in EFI_TO_COMPATIBILITY16_INIT_TABLE as more - ///< memory may have been discovered. - UINT32 UnconventionalDeviceTable; ///< Information to boot off an unconventional device like a PARTIES partition. Type - ///< UD_TABLE is defined below. -} EFI_TO_COMPATIBILITY16_BOOT_TABLE; - -/// -/// EFI_LEGACY_INSTALL_PCI_HANDLER -/// -typedef struct { - UINT8 PciBus; ///< The PCI bus of the device. - UINT8 PciDeviceFun; ///< The PCI device in bits 7:3 and function in bits 2:0. - UINT8 PciSegment; ///< The PCI segment of the device. - UINT8 PciClass; ///< The PCI class code of the device. - UINT8 PciSubclass; ///< The PCI subclass code of the device. - UINT8 PciInterface; ///< The PCI interface code of the device. - // - // Primary section - // - UINT8 PrimaryIrq; ///< The primary device IRQ. - UINT8 PrimaryReserved; ///< Reserved. - UINT16 PrimaryControl; ///< The primary device control I/O base. - UINT16 PrimaryBase; ///< The primary device I/O base. - UINT16 PrimaryBusMaster; ///< The primary device bus master I/O base. - // - // Secondary Section - // - UINT8 SecondaryIrq; ///< The secondary device IRQ. - UINT8 SecondaryReserved; ///< Reserved. - UINT16 SecondaryControl; ///< The secondary device control I/O base. - UINT16 SecondaryBase; ///< The secondary device I/O base. - UINT16 SecondaryBusMaster; ///< The secondary device bus master I/O base. -} EFI_LEGACY_INSTALL_PCI_HANDLER; - -#endif diff --git a/payloads/external/SeaBIOS/src/std/acpi.h b/payloads/external/SeaBIOS/src/std/acpi.h deleted file mode 100644 index 81c22757..00000000 --- a/payloads/external/SeaBIOS/src/std/acpi.h +++ /dev/null @@ -1,334 +0,0 @@ -#ifndef __ACPI_H -#define __ACPI_H - -#include "types.h" // u32 - -/* - * ACPI 2.0 Generic Address Space definition. - */ -struct acpi_20_generic_address { - u8 address_space_id; - u8 register_bit_width; - u8 register_bit_offset; - u8 reserved; - u64 address; -} PACKED; - -#define RSDP_SIGNATURE 0x2052545020445352LL // "RSD PTR " - -struct rsdp_descriptor { /* Root System Descriptor Pointer */ - u64 signature; /* ACPI signature, contains "RSD PTR " */ - u8 checksum; /* To make sum of struct == 0 */ - u8 oem_id [6]; /* OEM identification */ - u8 revision; /* Must be 0 for 1.0, 2 for 2.0 */ - u32 rsdt_physical_address; /* 32-bit physical address of RSDT */ - u32 length; /* XSDT Length in bytes including hdr */ - u64 xsdt_physical_address; /* 64-bit physical address of XSDT */ - u8 extended_checksum; /* Checksum of entire table */ - u8 reserved [3]; /* Reserved field must be 0 */ -}; - -/* Table structure from Linux kernel (the ACPI tables are under the - BSD license) */ - -#define ACPI_TABLE_HEADER_DEF /* ACPI common table header */ \ - u32 signature; /* ACPI signature (4 ASCII characters) */ \ - u32 length; /* Length of table, in bytes, including header */ \ - u8 revision; /* ACPI Specification minor version # */ \ - u8 checksum; /* To make sum of entire table == 0 */ \ - u8 oem_id [6]; /* OEM identification */ \ - u8 oem_table_id [8]; /* OEM table identification */ \ - u32 oem_revision; /* OEM revision number */ \ - u8 asl_compiler_id [4]; /* ASL compiler vendor ID */ \ - u32 asl_compiler_revision; /* ASL compiler revision number */ - -/* - * Fixed ACPI Description Table Fixed Feature Flags - */ -#define ACPI_FADT_F_WBINVD (1 << 0) -#define ACPI_FADT_F_WBINVD_FLUSH (1 << 1) -#define ACPI_FADT_F_PROC_C1 (1 << 2) -#define ACPI_FADT_F_P_LVL2_UP (1 << 3) -#define ACPI_FADT_F_PWR_BUTTON (1 << 4) -#define ACPI_FADT_F_SLP_BUTTON (1 << 5) -#define ACPI_FADT_F_FIX_RTC (1 << 6) -#define ACPI_FADT_F_RTC_S4 (1 << 7) -#define ACPI_FADT_F_TMR_VAL_EXT (1 << 8) -#define ACPI_FADT_F_DCK_CAP (1 << 9) -#define ACPI_FADT_F_RESET_REG_SUP (1 << 10) -#define ACPI_FADT_F_SEALED_CASE (1 << 11) -#define ACPI_FADT_F_HEADLESS (1 << 12) -#define ACPI_FADT_F_CPU_SW_SLP (1 << 13) -#define ACPI_FADT_F_PCI_EXP_WAK (1 << 14) -#define ACPI_FADT_F_USE_PLATFORM_CLOCK (1 << 15) -#define ACPI_FADT_F_S4_RTC_STS_VALID (1 << 16) -#define ACPI_FADT_F_REMOTE_POWER_ON_CAPABLE (1 << 17) -#define ACPI_FADT_F_FORCE_APIC_CLUSTER_MODEL (1 << 18) -#define ACPI_FADT_F_FORCE_APIC_PHYSICAL_DESTINATION_MODE (1 << 19) -#define ACPI_FADT_F_HW_REDUCED_ACPI (1 << 20) -#define ACPI_FADT_F_LOW_POWER_S0_IDLE_CAPABLE (1 << 21) - -/* - * ACPI 1.0 Fixed ACPI Description Table (FADT) - */ -#define FACP_SIGNATURE 0x50434146 // FACP -struct fadt_descriptor_rev1 -{ - ACPI_TABLE_HEADER_DEF /* ACPI common table header */ - u32 firmware_ctrl; /* Physical address of FACS */ - u32 dsdt; /* Physical address of DSDT */ - u8 model; /* System Interrupt Model */ - u8 reserved1; /* Reserved */ - u16 sci_int; /* System vector of SCI interrupt */ - u32 smi_cmd; /* Port address of SMI command port */ - u8 acpi_enable; /* Value to write to smi_cmd to enable ACPI */ - u8 acpi_disable; /* Value to write to smi_cmd to disable ACPI */ - u8 S4bios_req; /* Value to write to SMI CMD to enter S4BIOS state */ - u8 reserved2; /* Reserved - must be zero */ - u32 pm1a_evt_blk; /* Port address of Power Mgt 1a acpi_event Reg Blk */ - u32 pm1b_evt_blk; /* Port address of Power Mgt 1b acpi_event Reg Blk */ - u32 pm1a_cnt_blk; /* Port address of Power Mgt 1a Control Reg Blk */ - u32 pm1b_cnt_blk; /* Port address of Power Mgt 1b Control Reg Blk */ - u32 pm2_cnt_blk; /* Port address of Power Mgt 2 Control Reg Blk */ - u32 pm_tmr_blk; /* Port address of Power Mgt Timer Ctrl Reg Blk */ - u32 gpe0_blk; /* Port addr of General Purpose acpi_event 0 Reg Blk */ - u32 gpe1_blk; /* Port addr of General Purpose acpi_event 1 Reg Blk */ - u8 pm1_evt_len; /* Byte length of ports at pm1_x_evt_blk */ - u8 pm1_cnt_len; /* Byte length of ports at pm1_x_cnt_blk */ - u8 pm2_cnt_len; /* Byte Length of ports at pm2_cnt_blk */ - u8 pm_tmr_len; /* Byte Length of ports at pm_tm_blk */ - u8 gpe0_blk_len; /* Byte Length of ports at gpe0_blk */ - u8 gpe1_blk_len; /* Byte Length of ports at gpe1_blk */ - u8 gpe1_base; /* Offset in gpe model where gpe1 events start */ - u8 reserved3; /* Reserved */ - u16 plvl2_lat; /* Worst case HW latency to enter/exit C2 state */ - u16 plvl3_lat; /* Worst case HW latency to enter/exit C3 state */ - u16 flush_size; /* Size of area read to flush caches */ - u16 flush_stride; /* Stride used in flushing caches */ - u8 duty_offset; /* Bit location of duty cycle field in p_cnt reg */ - u8 duty_width; /* Bit width of duty cycle field in p_cnt reg */ - u8 day_alrm; /* Index to day-of-month alarm in RTC CMOS RAM */ - u8 mon_alrm; /* Index to month-of-year alarm in RTC CMOS RAM */ - u8 century; /* Index to century in RTC CMOS RAM */ - u8 reserved4; /* Reserved */ - u8 reserved4a; /* Reserved */ - u8 reserved4b; /* Reserved */ - u32 flags; -} PACKED; - -struct acpi_table_header /* ACPI common table header */ -{ - ACPI_TABLE_HEADER_DEF -} PACKED; - -/* - * ACPI 1.0 Root System Description Table (RSDT) - */ -#define RSDT_SIGNATURE 0x54445352 // RSDT -struct rsdt_descriptor_rev1 -{ - ACPI_TABLE_HEADER_DEF /* ACPI common table header */ - u32 table_offset_entry[0]; /* Array of pointers to other */ - /* ACPI tables */ -} PACKED; - -/* - * ACPI 2.0 eXtended System Description Table (XSDT) - */ -#define XSDT_SIGNATURE 0x54445358 // XSDT -struct xsdt_descriptor_rev2 -{ - ACPI_TABLE_HEADER_DEF /* ACPI common table header */ - u64 table_offset_entry[0]; /* Array of pointers to other */ - /* ACPI tables */ -} PACKED; - -/* - * ACPI 1.0 Firmware ACPI Control Structure (FACS) - */ -#define FACS_SIGNATURE 0x53434146 // FACS -struct facs_descriptor_rev1 -{ - u32 signature; /* ACPI Signature */ - u32 length; /* Length of structure, in bytes */ - u32 hardware_signature; /* Hardware configuration signature */ - u32 firmware_waking_vector; /* ACPI OS waking vector */ - u32 global_lock; /* Global Lock */ - u32 flags; - u8 resverved3 [40]; /* Reserved - must be zero */ -} PACKED; - -/* - * Differentiated System Description Table (DSDT) - */ -#define DSDT_SIGNATURE 0x54445344 // DSDT - -/* - * MADT values and structures - */ - -/* Values for MADT PCATCompat */ - -#define DUAL_PIC 0 -#define MULTIPLE_APIC 1 - -/* Master MADT */ - -#define APIC_SIGNATURE 0x43495041 // APIC -struct multiple_apic_table -{ - ACPI_TABLE_HEADER_DEF /* ACPI common table header */ - u32 local_apic_address; /* Physical address of local APIC */ - u32 flags; -} PACKED; - -/* Values for Type in APIC sub-headers */ - -#define APIC_PROCESSOR 0 -#define APIC_IO 1 -#define APIC_XRUPT_OVERRIDE 2 -#define APIC_NMI 3 -#define APIC_LOCAL_NMI 4 -#define APIC_ADDRESS_OVERRIDE 5 -#define APIC_IO_SAPIC 6 -#define APIC_LOCAL_SAPIC 7 -#define APIC_XRUPT_SOURCE 8 -#define APIC_RESERVED 9 /* 9 and greater are reserved */ - -/* - * MADT sub-structures (Follow MULTIPLE_APIC_DESCRIPTION_TABLE) - */ -#define ACPI_SUB_HEADER_DEF /* Common ACPI sub-structure header */\ - u8 type; \ - u8 length; - -/* Sub-structures for MADT */ - -struct madt_processor_apic -{ - ACPI_SUB_HEADER_DEF - u8 processor_id; /* ACPI processor id */ - u8 local_apic_id; /* Processor's local APIC id */ - u32 flags; -} PACKED; - -struct madt_io_apic -{ - ACPI_SUB_HEADER_DEF - u8 io_apic_id; /* I/O APIC ID */ - u8 reserved; /* Reserved - must be zero */ - u32 address; /* APIC physical address */ - u32 interrupt; /* Global system interrupt where INTI - * lines start */ -} PACKED; - -struct madt_intsrcovr { - ACPI_SUB_HEADER_DEF - u8 bus; - u8 source; - u32 gsi; - u16 flags; -} PACKED; - -struct madt_local_nmi { - ACPI_SUB_HEADER_DEF - u8 processor_id; /* ACPI processor id */ - u16 flags; /* MPS INTI flags */ - u8 lint; /* Local APIC LINT# */ -} PACKED; - -/* - * HPET Description Table - */ -#define HPET_SIGNATURE 0x54455048 // HPET -struct acpi_20_hpet { - ACPI_TABLE_HEADER_DEF /* ACPI common table header */ - u32 timer_block_id; - struct acpi_20_generic_address addr; - u8 hpet_number; - u16 min_tick; - u8 page_protect; -} PACKED; - -/* - * SRAT (NUMA topology description) table - */ - -#define SRAT_SIGNATURE 0x54415253 // SRAT -struct system_resource_affinity_table -{ - ACPI_TABLE_HEADER_DEF - u32 reserved1; - u32 reserved2[2]; -} PACKED; - -#define SRAT_PROCESSOR 0 -#define SRAT_MEMORY 1 - -struct srat_processor_affinity -{ - ACPI_SUB_HEADER_DEF - u8 proximity_lo; - u8 local_apic_id; - u32 flags; - u8 local_sapic_eid; - u8 proximity_hi[3]; - u32 reserved; -} PACKED; - -struct srat_memory_affinity -{ - ACPI_SUB_HEADER_DEF - u8 proximity[4]; - u16 reserved1; - u64 base_addr; - u64 range_length; - u32 reserved2; - u32 flags; - u32 reserved3[2]; -} PACKED; - -/* PCI fw r3.0 MCFG table. */ -/* Subtable */ -struct acpi_mcfg_allocation { - u64 address; /* Base address, processor-relative */ - u16 pci_segment; /* PCI segment group number */ - u8 start_bus_number; /* Starting PCI Bus number */ - u8 end_bus_number; /* Final PCI Bus number */ - u32 reserved; -} PACKED; - -#define MCFG_SIGNATURE 0x4746434d // MCFG -struct acpi_table_mcfg { - ACPI_TABLE_HEADER_DEF; - u8 reserved[8]; - struct acpi_mcfg_allocation allocation[0]; -} PACKED; - -#define TCPA_SIGNATURE 0x41504354 -struct tcpa_descriptor_rev2 -{ - ACPI_TABLE_HEADER_DEF - u16 platform_class; - u32 log_area_minimum_length; - u64 log_area_start_address; -} PACKED; - -/* TCPA ACPI definitions */ -#define TCPA_ACPI_CLASS_CLIENT 0 -#define TCPA_ACPI_CLASS_SERVER 1 - -#define TPM2_SIGNATURE 0x324D5054 -struct tpm2_descriptor_rev2 -{ - ACPI_TABLE_HEADER_DEF - u16 platform_class; - u16 reserved; - u64 address_of_control_area; - u32 start_method; - u8 start_method_params[12]; - u32 log_area_minimum_length; - u64 log_area_start_address; -} PACKED; - -#endif // acpi.h diff --git a/payloads/external/SeaBIOS/src/std/bda.h b/payloads/external/SeaBIOS/src/std/bda.h deleted file mode 100644 index 90d64a60..00000000 --- a/payloads/external/SeaBIOS/src/std/bda.h +++ /dev/null @@ -1,174 +0,0 @@ -// BIOS Data Area (and similar) definitions -#ifndef __BDA_H -#define __BDA_H - -#include "disk.h" // struct fdpt_s -#include "types.h" // u8 - - -/**************************************************************** - * Interrupt vector table - ****************************************************************/ - -struct rmode_IVT { - struct segoff_s ivec[256]; -}; - - -/**************************************************************** - * Bios Data Area (BDA) - ****************************************************************/ - -struct bios_data_area_s { - // 40:00 - u16 port_com[4]; - u16 port_lpt[3]; - u16 ebda_seg; - // 40:10 - u16 equipment_list_flags; - u8 pad1; - u16 mem_size_kb; - u8 pad2; - u8 ps2_ctrl_flag; - u16 kbd_flag0; - u8 alt_keypad; - u16 kbd_buf_head; - u16 kbd_buf_tail; - // 40:1e - u8 kbd_buf[32]; - u8 floppy_recalibration_status; - u8 floppy_motor_status; - // 40:40 - u8 floppy_motor_counter; - u8 floppy_last_status; - u8 floppy_return_status[7]; - u8 video_mode; - u16 video_cols; - u16 video_pagesize; - u16 video_pagestart; - // 40:50 - u16 cursor_pos[8]; - // 40:60 - u16 cursor_type; - u8 video_page; - u16 crtc_address; - u8 video_msr; - u8 video_pal; - struct segoff_s jump; - u8 other_6b; - u32 timer_counter; - // 40:70 - u8 timer_rollover; - u8 break_flag; - u16 soft_reset_flag; - u8 disk_last_status; - u8 hdcount; - u8 disk_control_byte; - u8 port_disk; - u8 lpt_timeout[4]; - u8 com_timeout[4]; - // 40:80 - u16 kbd_buf_start_offset; - u16 kbd_buf_end_offset; - u8 video_rows; - u16 char_height; - u8 video_ctl; - u8 video_switches; - u8 modeset_ctl; - u8 dcc_index; - u8 floppy_last_data_rate; - u8 disk_status_controller; - u8 disk_error_controller; - u8 disk_interrupt_flag; - u8 floppy_harddisk_info; - // 40:90 - u8 floppy_media_state[4]; - u8 floppy_track[2]; - u8 kbd_flag1; - u8 kbd_led; - struct segoff_s user_wait_complete_flag; - u32 user_wait_timeout; - // 40:A0 - u8 rtc_wait_flag; - u8 other_a1[7]; - struct segoff_s video_savetable; - u8 other_ac[4]; - // 40:B0 - u8 other_b0[5*16]; -} PACKED; - -// BDA floppy_recalibration_status bitdefs -#define FRS_IRQ (1<<7) - -// BDA rtc_wait_flag bitdefs -#define RWS_WAIT_PENDING (1<<0) -#define RWS_WAIT_ELAPSED (1<<7) - -// BDA floppy_media_state bitdefs -#define FMS_DRIVE_STATE_MASK (0x07) -#define FMS_MEDIA_DRIVE_ESTABLISHED (1<<4) -#define FMS_DOUBLE_STEPPING (1<<5) -#define FMS_DATA_RATE_MASK (0xc0) - -// BDA kbd_flag[01] bitdefs -#define KF0_RSHIFT (1<<0) -#define KF0_LSHIFT (1<<1) -#define KF0_CTRLACTIVE (1<<2) -#define KF0_ALTACTIVE (1<<3) -#define KF0_SCROLLACTIVE (1<<4) -#define KF0_NUMACTIVE (1<<5) -#define KF0_CAPSACTIVE (1<<6) -#define KF0_LCTRL (1<<8) -#define KF0_LALT (1<<9) -#define KF0_PAUSEACTIVE (1<<11) -#define KF0_SCROLL (1<<12) -#define KF0_NUM (1<<13) -#define KF0_CAPS (1<<14) - -#define KF1_LAST_E1 (1<<0) -#define KF1_LAST_E0 (1<<1) -#define KF1_RCTRL (1<<2) -#define KF1_RALT (1<<3) -#define KF1_101KBD (1<<4) - -// Limit of BDA timer_counter field -#define TICKS_PER_DAY 1573040 - - -/**************************************************************** - * Extended Bios Data Area (EBDA) - ****************************************************************/ - -struct extended_bios_data_area_s { - u8 size; - u8 reserved1[0x21]; - struct segoff_s far_call_pointer; - u8 mouse_flag1; - u8 mouse_flag2; - u8 mouse_data[0x08]; - // 0x30 - u8 other1[0x0d]; - - // 0x3d - struct fdpt_s fdpt[2]; - - // 0x5d - u8 other2[0xC4]; - - // 0x121 - Begin custom storage. -} PACKED; - - -/**************************************************************** - * Bios Config Table - ****************************************************************/ - -struct bios_config_table_s { - u16 size; - u8 model; - u8 submodel; - u8 biosrev; - u8 feature1, feature2, feature3, feature4, feature5; -} PACKED; - -#endif // bda.h diff --git a/payloads/external/SeaBIOS/src/std/disk.h b/payloads/external/SeaBIOS/src/std/disk.h deleted file mode 100644 index 63971089..00000000 --- a/payloads/external/SeaBIOS/src/std/disk.h +++ /dev/null @@ -1,175 +0,0 @@ -// Standard disk BIOS definitions. -#ifndef __DISK_H -#define __DISK_H - -#include "types.h" // u8 - -#define DISK_RET_SUCCESS 0x00 -#define DISK_RET_EPARAM 0x01 -#define DISK_RET_EADDRNOTFOUND 0x02 -#define DISK_RET_EWRITEPROTECT 0x03 -#define DISK_RET_ECHANGED 0x06 -#define DISK_RET_EBOUNDARY 0x09 -#define DISK_RET_EBADTRACK 0x0c -#define DISK_RET_ECONTROLLER 0x20 -#define DISK_RET_ETIMEOUT 0x80 -#define DISK_RET_ENOTLOCKED 0xb0 -#define DISK_RET_ELOCKED 0xb1 -#define DISK_RET_ENOTREMOVABLE 0xb2 -#define DISK_RET_ETOOMANYLOCKS 0xb4 -#define DISK_RET_EMEDIA 0xC0 -#define DISK_RET_ENOTREADY 0xAA - - -/**************************************************************** - * Interface structs - ****************************************************************/ - -// Bios disk structures. -struct int13ext_s { - u8 size; - u8 reserved; - u16 count; - struct segoff_s data; - u64 lba; -} PACKED; - -// DPTE definition -struct dpte_s { - u16 iobase1; - u16 iobase2; - u8 prefix; - u8 unused; - u8 irq; - u8 blkcount; - u8 dma; - u8 pio; - u16 options; - u16 reserved; - u8 revision; - u8 checksum; -}; - -// Disk Physical Table definition -struct int13dpt_s { - u16 size; - u16 infos; - u32 cylinders; - u32 heads; - u32 spt; - u64 sector_count; - u16 blksize; - struct segoff_s dpte; - u16 key; - u8 dpi_length; - u8 reserved1; - u16 reserved2; - u8 host_bus[4]; - u8 iface_type[8]; - u64 iface_path; - union { - struct { - u64 device_path; - u8 reserved3; - u8 checksum; - } phoenix; - struct { - u64 device_path[2]; - u8 reserved3; - u8 checksum; - } t13; - }; -} PACKED; - -// Floppy info -struct fdpt_s { - u16 cylinders; - u8 heads; - u8 a0h_signature; - u8 phys_sectors; - u16 precompensation; - u8 reserved; - u8 drive_control_byte; - u16 phys_cylinders; - u8 phys_heads; - u16 landing_zone; - u8 sectors; - u8 checksum; -} PACKED; - -// Floppy "Disk Base Table" -struct floppy_dbt_s { - u8 specify1; - u8 specify2; - u8 shutoff_ticks; - u8 bps_code; - u8 sectors; - u8 interblock_len; - u8 data_len; - u8 gap_len; - u8 fill_byte; - u8 settle_time; - u8 startup_time; -} PACKED; - -struct floppy_ext_dbt_s { - struct floppy_dbt_s dbt; - // Extra fields - u8 max_track; - u8 data_rate; - u8 drive_type; -} PACKED; - - -/**************************************************************** - * Master boot record - ****************************************************************/ - -struct packed_chs_s { - u8 heads; - u8 sptcyl; - u8 cyllow; -} PACKED; - -struct partition_s { - u8 status; - struct packed_chs_s first; - u8 type; - struct packed_chs_s last; - u32 lba; - u32 count; -} PACKED; - -struct mbr_s { - u8 code[440]; - // 0x01b8 - u32 diskseg; - // 0x01bc - u16 null; - // 0x01be - struct partition_s partitions[4]; - // 0x01fe - u16 signature; -} PACKED; - -#define MBR_SIGNATURE 0xaa55 - - -/**************************************************************** - * ElTorito CDROM interface - ****************************************************************/ - -struct eltorito_s { - u8 size; - u8 media; - u8 emulated_drive; - u8 controller_index; - u32 ilba; - u16 device_spec; - u16 buffer_segment; - u16 load_segment; - u16 sector_count; - struct packed_chs_s chs; -} PACKED; - -#endif // disk.h diff --git a/payloads/external/SeaBIOS/src/std/mptable.h b/payloads/external/SeaBIOS/src/std/mptable.h deleted file mode 100644 index fa6a2294..00000000 --- a/payloads/external/SeaBIOS/src/std/mptable.h +++ /dev/null @@ -1,77 +0,0 @@ -#ifndef __MPTABLE_H -#define __MPTABLE_H - -#include "types.h" // u32 - -#define MPTABLE_SIGNATURE 0x5f504d5f // "_MP_" - -struct mptable_floating_s { - u32 signature; - u32 physaddr; - u8 length; - u8 spec_rev; - u8 checksum; - u8 feature1; - u8 feature2; - u8 reserved[3]; -}; - -#define MPCONFIG_SIGNATURE 0x504d4350 // "PCMP" - -struct mptable_config_s { - u32 signature; - u16 length; - u8 spec; - u8 checksum; - char oemid[8]; - char productid[12]; - u32 oemptr; - u16 oemsize; - u16 entrycount; - u32 lapic; - u16 exttable_length; - u8 exttable_checksum; - u8 reserved; -} PACKED; - -#define MPT_TYPE_CPU 0 -#define MPT_TYPE_BUS 1 -#define MPT_TYPE_IOAPIC 2 -#define MPT_TYPE_INTSRC 3 -#define MPT_TYPE_LOCAL_INT 4 - -struct mpt_cpu { - u8 type; - u8 apicid; - u8 apicver; - u8 cpuflag; - u32 cpusignature; - u32 featureflag; - u32 reserved[2]; -} PACKED; - -struct mpt_bus { - u8 type; - u8 busid; - char bustype[6]; -} PACKED; - -struct mpt_ioapic { - u8 type; - u8 apicid; - u8 apicver; - u8 flags; - u32 apicaddr; -} PACKED; - -struct mpt_intsrc { - u8 type; - u8 irqtype; - u16 irqflag; - u8 srcbus; - u8 srcbusirq; - u8 dstapic; - u8 dstirq; -} PACKED; - -#endif // mptable.h diff --git a/payloads/external/SeaBIOS/src/std/multiboot.h b/payloads/external/SeaBIOS/src/std/multiboot.h deleted file mode 100644 index 6c951270..00000000 --- a/payloads/external/SeaBIOS/src/std/multiboot.h +++ /dev/null @@ -1,260 +0,0 @@ -/* multiboot.h - Multiboot header file. */ -/* Copyright (C) 1999,2003,2007,2008,2009,2010 Free Software Foundation, Inc. - * - * Permission is hereby granted, free of charge, to any person obtaining a copy - * of this software and associated documentation files (the "Software"), to - * deal in the Software without restriction, including without limitation the - * rights to use, copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the Software is - * furnished to do so, subject to the following conditions: - * - * The above copyright notice and this permission notice shall be included in - * all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL ANY - * DEVELOPER OR DISTRIBUTOR BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR - * IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. - */ - -#ifndef MULTIBOOT_HEADER -#define MULTIBOOT_HEADER 1 - -/* How many bytes from the start of the file we search for the header. */ -#define MULTIBOOT_SEARCH 8192 -#define MULTIBOOT_HEADER_ALIGN 4 - -/* The magic field should contain this. */ -#define MULTIBOOT_HEADER_MAGIC 0x1BADB002 - -/* This should be in %eax. */ -#define MULTIBOOT_BOOTLOADER_MAGIC 0x2BADB002 - -/* Alignment of multiboot modules. */ -#define MULTIBOOT_MOD_ALIGN 0x00001000 - -/* Alignment of the multiboot info structure. */ -#define MULTIBOOT_INFO_ALIGN 0x00000004 - -/* Flags set in the 'flags' member of the multiboot header. */ - -/* Align all boot modules on i386 page (4KB) boundaries. */ -#define MULTIBOOT_PAGE_ALIGN 0x00000001 - -/* Must pass memory information to OS. */ -#define MULTIBOOT_MEMORY_INFO 0x00000002 - -/* Must pass video information to OS. */ -#define MULTIBOOT_VIDEO_MODE 0x00000004 - -/* This flag indicates the use of the address fields in the header. */ -#define MULTIBOOT_AOUT_KLUDGE 0x00010000 - -/* Flags to be set in the 'flags' member of the multiboot info structure. */ - -/* is there basic lower/upper memory information? */ -#define MULTIBOOT_INFO_MEMORY 0x00000001 -/* is there a boot device set? */ -#define MULTIBOOT_INFO_BOOTDEV 0x00000002 -/* is the command-line defined? */ -#define MULTIBOOT_INFO_CMDLINE 0x00000004 -/* are there modules to do something with? */ -#define MULTIBOOT_INFO_MODS 0x00000008 - -/* These next two are mutually exclusive */ - -/* is there a symbol table loaded? */ -#define MULTIBOOT_INFO_AOUT_SYMS 0x00000010 -/* is there an ELF section header table? */ -#define MULTIBOOT_INFO_ELF_SHDR 0X00000020 - -/* is there a full memory map? */ -#define MULTIBOOT_INFO_MEM_MAP 0x00000040 - -/* Is there drive info? */ -#define MULTIBOOT_INFO_DRIVE_INFO 0x00000080 - -/* Is there a config table? */ -#define MULTIBOOT_INFO_CONFIG_TABLE 0x00000100 - -/* Is there a boot loader name? */ -#define MULTIBOOT_INFO_BOOT_LOADER_NAME 0x00000200 - -/* Is there a APM table? */ -#define MULTIBOOT_INFO_APM_TABLE 0x00000400 - -/* Is there video information? */ -#define MULTIBOOT_INFO_VBE_INFO 0x00000800 -#define MULTIBOOT_INFO_FRAMEBUFFER_INFO 0x00001000 - -#ifndef ASM_FILE - -typedef unsigned char multiboot_uint8_t; -typedef unsigned short multiboot_uint16_t; -typedef unsigned int multiboot_uint32_t; -typedef unsigned long long multiboot_uint64_t; - -struct multiboot_header -{ - /* Must be MULTIBOOT_MAGIC - see above. */ - multiboot_uint32_t magic; - - /* Feature flags. */ - multiboot_uint32_t flags; - - /* The above fields plus this one must equal 0 mod 2^32. */ - multiboot_uint32_t checksum; - - /* These are only valid if MULTIBOOT_AOUT_KLUDGE is set. */ - multiboot_uint32_t header_addr; - multiboot_uint32_t load_addr; - multiboot_uint32_t load_end_addr; - multiboot_uint32_t bss_end_addr; - multiboot_uint32_t entry_addr; - - /* These are only valid if MULTIBOOT_VIDEO_MODE is set. */ - multiboot_uint32_t mode_type; - multiboot_uint32_t width; - multiboot_uint32_t height; - multiboot_uint32_t depth; -}; - -/* The symbol table for a.out. */ -struct multiboot_aout_symbol_table -{ - multiboot_uint32_t tabsize; - multiboot_uint32_t strsize; - multiboot_uint32_t addr; - multiboot_uint32_t reserved; -}; -typedef struct multiboot_aout_symbol_table multiboot_aout_symbol_table_t; - -/* The section header table for ELF. */ -struct multiboot_elf_section_header_table -{ - multiboot_uint32_t num; - multiboot_uint32_t size; - multiboot_uint32_t addr; - multiboot_uint32_t shndx; -}; -typedef struct multiboot_elf_section_header_table multiboot_elf_section_header_table_t; - -struct multiboot_info -{ - /* Multiboot info version number */ - multiboot_uint32_t flags; - - /* Available memory from BIOS */ - multiboot_uint32_t mem_lower; - multiboot_uint32_t mem_upper; - - /* "root" partition */ - multiboot_uint32_t boot_device; - - /* Kernel command line */ - multiboot_uint32_t cmdline; - - /* Boot-Module list */ - multiboot_uint32_t mods_count; - multiboot_uint32_t mods_addr; - - union - { - multiboot_aout_symbol_table_t aout_sym; - multiboot_elf_section_header_table_t elf_sec; - } u; - - /* Memory Mapping buffer */ - multiboot_uint32_t mmap_length; - multiboot_uint32_t mmap_addr; - - /* Drive Info buffer */ - multiboot_uint32_t drives_length; - multiboot_uint32_t drives_addr; - - /* ROM configuration table */ - multiboot_uint32_t config_table; - - /* Boot Loader Name */ - multiboot_uint32_t boot_loader_name; - - /* APM table */ - multiboot_uint32_t apm_table; - - /* Video */ - multiboot_uint32_t vbe_control_info; - multiboot_uint32_t vbe_mode_info; - multiboot_uint16_t vbe_mode; - multiboot_uint16_t vbe_interface_seg; - multiboot_uint16_t vbe_interface_off; - multiboot_uint16_t vbe_interface_len; - - multiboot_uint64_t framebuffer_addr; - multiboot_uint32_t framebuffer_pitch; - multiboot_uint32_t framebuffer_width; - multiboot_uint32_t framebuffer_height; - multiboot_uint8_t framebuffer_bpp; -#define MULTIBOOT_FRAMEBUFFER_TYPE_INDEXED 0 -#define MULTIBOOT_FRAMEBUFFER_TYPE_RGB 1 -#define MULTIBOOT_FRAMEBUFFER_TYPE_EGA_TEXT 2 - multiboot_uint8_t framebuffer_type; - union - { - struct - { - multiboot_uint32_t framebuffer_palette_addr; - multiboot_uint16_t framebuffer_palette_num_colors; - }; - struct - { - multiboot_uint8_t framebuffer_red_field_position; - multiboot_uint8_t framebuffer_red_mask_size; - multiboot_uint8_t framebuffer_green_field_position; - multiboot_uint8_t framebuffer_green_mask_size; - multiboot_uint8_t framebuffer_blue_field_position; - multiboot_uint8_t framebuffer_blue_mask_size; - }; - }; -}; -typedef struct multiboot_info multiboot_info_t; - -struct multiboot_color -{ - multiboot_uint8_t red; - multiboot_uint8_t green; - multiboot_uint8_t blue; -}; - -struct multiboot_mmap_entry -{ - multiboot_uint32_t size; - multiboot_uint64_t addr; - multiboot_uint64_t len; -#define MULTIBOOT_MEMORY_AVAILABLE 1 -#define MULTIBOOT_MEMORY_RESERVED 2 -#define MULTIBOOT_MEMORY_ACPI_RECLAIMABLE 3 -#define MULTIBOOT_MEMORY_NVS 4 -#define MULTIBOOT_MEMORY_BADRAM 5 - multiboot_uint32_t type; -} __attribute__((packed)); -typedef struct multiboot_mmap_entry multiboot_memory_map_t; - -struct multiboot_mod_list -{ - /* the memory used goes from bytes 'mod_start' to 'mod_end-1' inclusive */ - multiboot_uint32_t mod_start; - multiboot_uint32_t mod_end; - - /* Module command line */ - multiboot_uint32_t cmdline; - - /* padding to take it to 16 bytes (must be zero) */ - multiboot_uint32_t pad; -}; -typedef struct multiboot_mod_list multiboot_module_t; - -#endif /* ! ASM_FILE */ - -#endif /* ! MULTIBOOT_HEADER */ diff --git a/payloads/external/SeaBIOS/src/std/optionrom.h b/payloads/external/SeaBIOS/src/std/optionrom.h deleted file mode 100644 index 94ca4ae1..00000000 --- a/payloads/external/SeaBIOS/src/std/optionrom.h +++ /dev/null @@ -1,59 +0,0 @@ -#ifndef __OPTIONROMS_H -#define __OPTIONROMS_H - -#include "types.h" // u32 - -#define OPTION_ROM_SIGNATURE 0xaa55 - -struct rom_header { - u16 signature; - u8 size; - u8 initVector[4]; - u8 reserved[17]; - u16 pcioffset; - u16 pnpoffset; -} PACKED; - -#define PCI_ROM_SIGNATURE 0x52494350 // "PCIR" - -struct pci_data { - u32 signature; - u16 vendor; - u16 device; - u16 vitaldata; - u16 dlen; - u8 drevision; - u8 class_lo; - u16 class_hi; - u16 ilen; - u16 irevision; - u8 type; - u8 indicator; - u16 reserved; -} PACKED; - -struct pnp_data { - u32 signature; - u8 revision; - u8 len; - u16 nextoffset; - u8 reserved_08; - u8 checksum; - u32 devid; - u16 manufacturer; - u16 productname; - u8 type_lo; - u16 type_hi; - u8 dev_flags; - u16 bcv; - u16 dv; - u16 bev; - u16 reserved_1c; - u16 staticresource; -} PACKED; - -#define OPTION_ROM_ALIGN 2048 -#define OPTION_ROM_INITVECTOR offsetof(struct rom_header, initVector[0]) -#define PCIROM_CODETYPE_X86 0 - -#endif diff --git a/payloads/external/SeaBIOS/src/std/pirtable.h b/payloads/external/SeaBIOS/src/std/pirtable.h deleted file mode 100644 index 9de3a438..00000000 --- a/payloads/external/SeaBIOS/src/std/pirtable.h +++ /dev/null @@ -1,35 +0,0 @@ -#ifndef __PIRTABLE_H -#define __PIRTABLE_H - -#include "types.h" // u32 - -struct link_info { - u8 link; - u16 bitmap; -} PACKED; - -struct pir_slot { - u8 bus; - u8 dev; - struct link_info links[4]; - u8 slot_nr; - u8 reserved; -} PACKED; - -struct pir_header { - u32 signature; - u16 version; - u16 size; - u8 router_bus; - u8 router_devfunc; - u16 exclusive_irqs; - u32 compatible_devid; - u32 miniport_data; - u8 reserved[11]; - u8 checksum; - struct pir_slot slots[0]; -} PACKED; - -#define PIR_SIGNATURE 0x52495024 // $PIR - -#endif // pirtable.h diff --git a/payloads/external/SeaBIOS/src/std/pmm.h b/payloads/external/SeaBIOS/src/std/pmm.h deleted file mode 100644 index 80027f38..00000000 --- a/payloads/external/SeaBIOS/src/std/pmm.h +++ /dev/null @@ -1,19 +0,0 @@ -#ifndef __PMM_H -#define __PMM_H - -#include "types.h" // u32 - -#define PMM_SIGNATURE 0x4d4d5024 // $PMM - -struct pmmheader { - u32 signature; - u8 version; - u8 length; - u8 checksum; - struct segoff_s entry; - u8 reserved[5]; -} PACKED; - -#define PMM_FUNCTION_NOT_SUPPORTED 0xffffffff - -#endif // pmm.h diff --git a/payloads/external/SeaBIOS/src/std/pnpbios.h b/payloads/external/SeaBIOS/src/std/pnpbios.h deleted file mode 100644 index 0871e3ab..00000000 --- a/payloads/external/SeaBIOS/src/std/pnpbios.h +++ /dev/null @@ -1,24 +0,0 @@ -#ifndef __PNPHEADER_H -#define __PNPHEADER_H - -#define PNP_SIGNATURE 0x506e5024 // $PnP - -struct pnpheader { - u32 signature; - u8 version; - u8 length; - u16 control; - u8 checksum; - u32 eventloc; - u16 real_ip; - u16 real_cs; - u16 prot_ip; - u32 prot_base; - u32 oemid; - u16 real_ds; - u32 prot_database; -} PACKED; - -#define FUNCTION_NOT_SUPPORTED 0x82 - -#endif // pnpheader.h diff --git a/payloads/external/SeaBIOS/src/std/smbios.h b/payloads/external/SeaBIOS/src/std/smbios.h deleted file mode 100644 index 4ccf2ea3..00000000 --- a/payloads/external/SeaBIOS/src/std/smbios.h +++ /dev/null @@ -1,167 +0,0 @@ -#ifndef __SMBIOS_H -#define __SMBIOS_H - -#include "types.h" // u32 - -#define SMBIOS_SIGNATURE 0x5f4d535f // "_SM_" - -/* SMBIOS entry point -- must be written to a 16-bit aligned address - between 0xf0000 and 0xfffff. - */ -struct smbios_entry_point { - u32 signature; - u8 checksum; - u8 length; - u8 smbios_major_version; - u8 smbios_minor_version; - u16 max_structure_size; - u8 entry_point_revision; - u8 formatted_area[5]; - char intermediate_anchor_string[5]; - u8 intermediate_checksum; - u16 structure_table_length; - u32 structure_table_address; - u16 number_of_structures; - u8 smbios_bcd_revision; -} PACKED; - -/* This goes at the beginning of every SMBIOS structure. */ -struct smbios_structure_header { - u8 type; - u8 length; - u16 handle; -} PACKED; - -/* SMBIOS type 0 - BIOS Information */ -struct smbios_type_0 { - struct smbios_structure_header header; - u8 vendor_str; - u8 bios_version_str; - u16 bios_starting_address_segment; - u8 bios_release_date_str; - u8 bios_rom_size; - u8 bios_characteristics[8]; - u8 bios_characteristics_extension_bytes[2]; - u8 system_bios_major_release; - u8 system_bios_minor_release; - u8 embedded_controller_major_release; - u8 embedded_controller_minor_release; -} PACKED; - -/* SMBIOS type 1 - System Information */ -struct smbios_type_1 { - struct smbios_structure_header header; - u8 manufacturer_str; - u8 product_name_str; - u8 version_str; - u8 serial_number_str; - u8 uuid[16]; - u8 wake_up_type; - u8 sku_number_str; - u8 family_str; -} PACKED; - -/* SMBIOS type 3 - System Enclosure (v2.3) */ -struct smbios_type_3 { - struct smbios_structure_header header; - u8 manufacturer_str; - u8 type; - u8 version_str; - u8 serial_number_str; - u8 asset_tag_number_str; - u8 boot_up_state; - u8 power_supply_state; - u8 thermal_state; - u8 security_status; - u32 oem_defined; - u8 height; - u8 number_of_power_cords; - u8 contained_element_count; - // contained elements follow -} PACKED; - -/* SMBIOS type 4 - Processor Information (v2.0) */ -struct smbios_type_4 { - struct smbios_structure_header header; - u8 socket_designation_str; - u8 processor_type; - u8 processor_family; - u8 processor_manufacturer_str; - u32 processor_id[2]; - u8 processor_version_str; - u8 voltage; - u16 external_clock; - u16 max_speed; - u16 current_speed; - u8 status; - u8 processor_upgrade; - u16 l1_cache_handle; - u16 l2_cache_handle; - u16 l3_cache_handle; -} PACKED; - -/* SMBIOS type 16 - Physical Memory Array - * Associated with one type 17 (Memory Device). - */ -struct smbios_type_16 { - struct smbios_structure_header header; - u8 location; - u8 use; - u8 error_correction; - u32 maximum_capacity; - u16 memory_error_information_handle; - u16 number_of_memory_devices; -} PACKED; - -/* SMBIOS type 17 - Memory Device - * Associated with one type 19 - */ -struct smbios_type_17 { - struct smbios_structure_header header; - u16 physical_memory_array_handle; - u16 memory_error_information_handle; - u16 total_width; - u16 data_width; - u16 size; - u8 form_factor; - u8 device_set; - u8 device_locator_str; - u8 bank_locator_str; - u8 memory_type; - u16 type_detail; -} PACKED; - -/* SMBIOS type 19 - Memory Array Mapped Address */ -struct smbios_type_19 { - struct smbios_structure_header header; - u32 starting_address; - u32 ending_address; - u16 memory_array_handle; - u8 partition_width; -} PACKED; - -/* SMBIOS type 20 - Memory Device Mapped Address */ -struct smbios_type_20 { - struct smbios_structure_header header; - u32 starting_address; - u32 ending_address; - u16 memory_device_handle; - u16 memory_array_mapped_address_handle; - u8 partition_row_position; - u8 interleave_position; - u8 interleaved_data_depth; -} PACKED; - -/* SMBIOS type 32 - System Boot Information */ -struct smbios_type_32 { - struct smbios_structure_header header; - u8 reserved[6]; - u8 boot_status; -} PACKED; - -/* SMBIOS type 127 -- End-of-table */ -struct smbios_type_127 { - struct smbios_structure_header header; -} PACKED; - -#endif // smbios.h diff --git a/payloads/external/SeaBIOS/src/std/tcg.h b/payloads/external/SeaBIOS/src/std/tcg.h deleted file mode 100644 index 98cca499..00000000 --- a/payloads/external/SeaBIOS/src/std/tcg.h +++ /dev/null @@ -1,580 +0,0 @@ -#ifndef STD_TCG_H -#define STD_TCG_H - -#include "types.h" - -#define SHA1_BUFSIZE 20 -#define SHA256_BUFSIZE 32 -#define SHA384_BUFSIZE 48 -#define SHA512_BUFSIZE 64 -#define SM3_256_BUFSIZE 32 -#define SHA3_256_BUFSIZE 32 -#define SHA3_384_BUFSIZE 48 -#define SHA3_512_BUFSIZE 64 - - -/**************************************************************** - * 16bit BIOS interface - ****************************************************************/ - -/* Define for section 12.3 */ -#define TCG_PC_OK 0x0 -#define TCG_PC_TPMERROR 0x1 -#define TCG_PC_LOGOVERFLOW 0x2 -#define TCG_PC_UNSUPPORTED 0x3 - -#define TPM_ALG_SHA 0x4 - -#define TCG_MAGIC 0x41504354L -#define TCG_VERSION_MAJOR 1 -#define TCG_VERSION_MINOR 2 - -#define TPM_OK 0x0 -#define TPM_RET_BASE 0x1 -#define TCG_GENERAL_ERROR (TPM_RET_BASE + 0x0) -#define TCG_TPM_IS_LOCKED (TPM_RET_BASE + 0x1) -#define TCG_NO_RESPONSE (TPM_RET_BASE + 0x2) -#define TCG_INVALID_RESPONSE (TPM_RET_BASE + 0x3) -#define TCG_INVALID_ACCESS_REQUEST (TPM_RET_BASE + 0x4) -#define TCG_FIRMWARE_ERROR (TPM_RET_BASE + 0x5) -#define TCG_INTEGRITY_CHECK_FAILED (TPM_RET_BASE + 0x6) -#define TCG_INVALID_DEVICE_ID (TPM_RET_BASE + 0x7) -#define TCG_INVALID_VENDOR_ID (TPM_RET_BASE + 0x8) -#define TCG_UNABLE_TO_OPEN (TPM_RET_BASE + 0x9) -#define TCG_UNABLE_TO_CLOSE (TPM_RET_BASE + 0xa) -#define TCG_RESPONSE_TIMEOUT (TPM_RET_BASE + 0xb) -#define TCG_INVALID_COM_REQUEST (TPM_RET_BASE + 0xc) -#define TCG_INVALID_ADR_REQUEST (TPM_RET_BASE + 0xd) -#define TCG_WRITE_BYTE_ERROR (TPM_RET_BASE + 0xe) -#define TCG_READ_BYTE_ERROR (TPM_RET_BASE + 0xf) -#define TCG_BLOCK_WRITE_TIMEOUT (TPM_RET_BASE + 0x10) -#define TCG_CHAR_WRITE_TIMEOUT (TPM_RET_BASE + 0x11) -#define TCG_CHAR_READ_TIMEOUT (TPM_RET_BASE + 0x12) -#define TCG_BLOCK_READ_TIMEOUT (TPM_RET_BASE + 0x13) -#define TCG_TRANSFER_ABORT (TPM_RET_BASE + 0x14) -#define TCG_INVALID_DRV_FUNCTION (TPM_RET_BASE + 0x15) -#define TCG_OUTPUT_BUFFER_TOO_SHORT (TPM_RET_BASE + 0x16) -#define TCG_FATAL_COM_ERROR (TPM_RET_BASE + 0x17) -#define TCG_INVALID_INPUT_PARA (TPM_RET_BASE + 0x18) -#define TCG_TCG_COMMAND_ERROR (TPM_RET_BASE + 0x19) -#define TCG_INTERFACE_SHUTDOWN (TPM_RET_BASE + 0x20) -//define TCG_PC_UNSUPPORTED (TPM_RET_BASE + 0x21) -#define TCG_PC_TPM_NOT_PRESENT (TPM_RET_BASE + 0x22) -#define TCG_PC_TPM_DEACTIVATED (TPM_RET_BASE + 0x23) - -/* interrupt identifiers (al register) */ -enum irq_ids { - TCG_StatusCheck = 0, - TCG_HashLogExtendEvent = 1, - TCG_PassThroughToTPM = 2, - TCG_ShutdownPreBootInterface = 3, - TCG_HashLogEvent = 4, - TCG_HashAll = 5, - TCG_TSS = 6, - TCG_CompactHashLogExtendEvent = 7, -}; - -/* Input and Output blocks for the TCG BIOS commands */ - -struct hleei_short -{ - u16 ipblength; - u16 reserved; - const void *hashdataptr; - u32 hashdatalen; - u32 pcrindex; - const void *logdataptr; - u32 logdatalen; -} PACKED; - -struct hleei_long -{ - u16 ipblength; - u16 reserved; - void *hashdataptr; - u32 hashdatalen; - u32 pcrindex; - u32 reserved2; - void *logdataptr; - u32 logdatalen; -} PACKED; - -struct hleeo -{ - u16 opblength; - u16 reserved; - u32 eventnumber; - u8 digest[SHA1_BUFSIZE]; -} PACKED; - -struct pttti -{ - u16 ipblength; - u16 reserved; - u16 opblength; - u16 reserved2; - u8 tpmopin[0]; -} PACKED; - -struct pttto -{ - u16 opblength; - u16 reserved; - u8 tpmopout[0]; -}; - -struct hlei -{ - u16 ipblength; - u16 reserved; - const void *hashdataptr; - u32 hashdatalen; - u32 pcrindex; - u32 logeventtype; - const void *logdataptr; - u32 logdatalen; -} PACKED; - -struct hleo -{ - u16 opblength; - u16 reserved; - u32 eventnumber; -} PACKED; - -struct hai -{ - u16 ipblength; - u16 reserved; - const void *hashdataptr; - u32 hashdatalen; - u32 algorithmid; -} PACKED; - -struct ti -{ - u16 ipblength; - u16 reserved; - u16 opblength; - u16 reserved2; - u8 tssoperandin[0]; -} PACKED; - -struct to -{ - u16 opblength; - u16 reserved; - u8 tssoperandout[0]; -} PACKED; - -struct pcpes -{ - u32 pcrindex; - u32 eventtype; - u8 digest[SHA1_BUFSIZE]; - u32 eventdatasize; - u8 event[0]; -} PACKED; - - -/**************************************************************** - * TPM v1.2 hardware commands - ****************************************************************/ - -#define TPM_ORD_SelfTestFull 0x00000050 -#define TPM_ORD_ForceClear 0x0000005d -#define TPM_ORD_GetCapability 0x00000065 -#define TPM_ORD_PhysicalEnable 0x0000006f -#define TPM_ORD_PhysicalDisable 0x00000070 -#define TPM_ORD_SetOwnerInstall 0x00000071 -#define TPM_ORD_PhysicalSetDeactivated 0x00000072 -#define TPM_ORD_SetTempDeactivated 0x00000073 -#define TPM_ORD_Startup 0x00000099 -#define TPM_ORD_PhysicalPresence 0x4000000a -#define TPM_ORD_Extend 0x00000014 -#define TSC_ORD_ResetEstablishmentBit 0x4000000b - -#define TPM_ST_CLEAR 0x0001 -#define TPM_ST_STATE 0x0002 -#define TPM_ST_DEACTIVATED 0x0003 - -#define TPM_PP_CMD_ENABLE 0x0020 -#define TPM_PP_PRESENT 0x0008 -#define TPM_PP_NOT_PRESENT_LOCK 0x0014 - -/* TPM command error codes */ -#define TPM_INVALID_POSTINIT 0x26 -#define TPM_BAD_LOCALITY 0x3d - -/* TPM command tags */ -#define TPM_TAG_RQU_CMD 0x00c1 -#define TPM_TAG_RQU_AUTH1_CMD 0x00c2 -#define TPM_TAG_RQU_AUTH2_CMD 0x00c3 - -struct tpm_req_header { - u16 tag; - u32 totlen; - u32 ordinal; -} PACKED; - -struct tpm_rsp_header { - u16 tag; - u32 totlen; - u32 errcode; -} PACKED; - -struct tpm_req_extend { - struct tpm_req_header hdr; - u32 pcrindex; - u8 digest[SHA1_BUFSIZE]; -} PACKED; - -struct tpm_rsp_extend { - struct tpm_rsp_header hdr; - u8 digest[SHA1_BUFSIZE]; -} PACKED; - -struct tpm_req_getcap { - struct tpm_req_header hdr; - u32 capArea; - u32 subCapSize; - u32 subCap; -} PACKED; - -#define TPM_CAP_FLAG 0x04 -#define TPM_CAP_PROPERTY 0x05 -#define TPM_CAP_FLAG_PERMANENT 0x108 -#define TPM_CAP_FLAG_VOLATILE 0x109 -#define TPM_CAP_PROP_OWNER 0x111 -#define TPM_CAP_PROP_TIS_TIMEOUT 0x115 -#define TPM_CAP_PROP_DURATION 0x120 - -struct tpm_permanent_flags { - u16 tag; - u8 flags[20]; -} PACKED; - -enum permFlagsIndex { - PERM_FLAG_IDX_DISABLE = 0, - PERM_FLAG_IDX_OWNERSHIP, - PERM_FLAG_IDX_DEACTIVATED, - PERM_FLAG_IDX_READPUBEK, - PERM_FLAG_IDX_DISABLEOWNERCLEAR, - PERM_FLAG_IDX_ALLOW_MAINTENANCE, - PERM_FLAG_IDX_PHYSICAL_PRESENCE_LIFETIME_LOCK, - PERM_FLAG_IDX_PHYSICAL_PRESENCE_HW_ENABLE, - PERM_FLAG_IDX_PHYSICAL_PRESENCE_CMD_ENABLE, -}; - -struct tpm_res_getcap_perm_flags { - struct tpm_rsp_header hdr; - u32 size; - struct tpm_permanent_flags perm_flags; -} PACKED; - -struct tpm_stclear_flags { - u16 tag; - u8 flags[5]; -} PACKED; - -#define STCLEAR_FLAG_IDX_DEACTIVATED 0 -#define STCLEAR_FLAG_IDX_DISABLE_FORCE_CLEAR 1 -#define STCLEAR_FLAG_IDX_PHYSICAL_PRESENCE 2 -#define STCLEAR_FLAG_IDX_PHYSICAL_PRESENCE_LOCK 3 -#define STCLEAR_FLAG_IDX_GLOBAL_LOCK 4 - -struct tpm_res_getcap_stclear_flags { - struct tpm_rsp_header hdr; - u32 size; - struct tpm_stclear_flags stclear_flags; -} PACKED; - -struct tpm_res_getcap_ownerauth { - struct tpm_rsp_header hdr; - u32 size; - u8 flag; -} PACKED; - -struct tpm_res_getcap_timeouts { - struct tpm_rsp_header hdr; - u32 size; - u32 timeouts[4]; -} PACKED; - -struct tpm_res_getcap_durations { - struct tpm_rsp_header hdr; - u32 size; - u32 durations[3]; -} PACKED; - -struct tpm_res_sha1start { - struct tpm_rsp_header hdr; - u32 max_num_bytes; -} PACKED; - -struct tpm_res_sha1complete { - struct tpm_rsp_header hdr; - u8 hash[20]; -} PACKED; - - -/**************************************************************** - * TPM v2.0 hardware commands - ****************************************************************/ - -#define TPM2_NO 0 -#define TPM2_YES 1 - -#define TPM2_SU_CLEAR 0x0000 -#define TPM2_SU_STATE 0x0001 - -#define TPM2_RH_OWNER 0x40000001 -#define TPM2_RS_PW 0x40000009 -#define TPM2_RH_ENDORSEMENT 0x4000000b -#define TPM2_RH_PLATFORM 0x4000000c - -#define TPM2_ALG_SHA1 0x0004 -#define TPM2_ALG_SHA256 0x000b -#define TPM2_ALG_SHA384 0x000c -#define TPM2_ALG_SHA512 0x000d -#define TPM2_ALG_SM3_256 0x0012 -#define TPM2_ALG_SHA3_256 0x0027 -#define TPM2_ALG_SHA3_384 0x0028 -#define TPM2_ALG_SHA3_512 0x0029 - -#define TPM2_ALG_SHA1_FLAG (1 << 0) -#define TPM2_ALG_SHA256_FLAG (1 << 1) -#define TPM2_ALG_SHA384_FLAG (1 << 2) -#define TPM2_ALG_SHA512_FLAG (1 << 3) -#define TPM2_ALG_SM3_256_FLAG (1 << 4) -#define TPM2_ALG_SHA3_256_FLAG (1 << 5) -#define TPM2_ALG_SHA3_384_FLAG (1 << 6) -#define TPM2_ALG_SHA3_512_FLAG (1 << 7) - -/* TPM 2 command tags */ -#define TPM2_ST_NO_SESSIONS 0x8001 -#define TPM2_ST_SESSIONS 0x8002 - -/* TPM 2 commands */ -#define TPM2_CC_HierarchyControl 0x121 -#define TPM2_CC_Clear 0x126 -#define TPM2_CC_ClearControl 0x127 -#define TPM2_CC_HierarchyChangeAuth 0x129 -#define TPM2_CC_PCR_Allocate 0x12b -#define TPM2_CC_SelfTest 0x143 -#define TPM2_CC_Startup 0x144 -#define TPM2_CC_Shutdown 0x145 -#define TPM2_CC_StirRandom 0x146 -#define TPM2_CC_GetCapability 0x17a -#define TPM2_CC_GetRandom 0x17b -#define TPM2_CC_PCR_Extend 0x182 - -/* TPM 2 error codes */ -#define TPM2_RC_INITIALIZE 0x100 - -/* TPM 2 Capabilities */ -#define TPM2_CAP_PCRS 0x00000005 - -/* TPM 2 data structures */ - -struct tpm2_req_stirrandom { - struct tpm_req_header hdr; - u16 size; - u64 stir; -} PACKED; - -struct tpm2_req_getrandom { - struct tpm_req_header hdr; - u16 bytesRequested; -} PACKED; - -struct tpm2b_20 { - u16 size; - u8 buffer[20]; -} PACKED; - -struct tpm2_res_getrandom { - struct tpm_rsp_header hdr; - struct tpm2b_20 rnd; -} PACKED; - -struct tpm2_authblock { - u32 handle; - u16 noncesize; /* always 0 */ - u8 contsession; /* always TPM2_YES */ - u16 pwdsize; /* always 0 */ -} PACKED; - -struct tpm2_req_hierarchychangeauth { - struct tpm_req_header hdr; - u32 authhandle; - u32 authblocksize; - struct tpm2_authblock authblock; - struct tpm2b_20 newAuth; -} PACKED; - -struct tpm2_req_extend { - struct tpm_req_header hdr; - u32 pcrindex; - u32 authblocksize; - struct tpm2_authblock authblock; - u8 digest[0]; -} PACKED; - -struct tpm2_req_clearcontrol { - struct tpm_req_header hdr; - u32 authhandle; - u32 authblocksize; - struct tpm2_authblock authblock; - u8 disable; -} PACKED; - -struct tpm2_req_clear { - struct tpm_req_header hdr; - u32 authhandle; - u32 authblocksize; - struct tpm2_authblock authblock; -} PACKED; - -struct tpm2_req_hierarchycontrol { - struct tpm_req_header hdr; - u32 authhandle; - u32 authblocksize; - struct tpm2_authblock authblock; - u32 enable; - u8 state; -} PACKED; - -struct tpm2_req_getcapability { - struct tpm_req_header hdr; - u32 capability; - u32 property; - u32 propertycount; -} PACKED; - -struct tpm2_res_getcapability { - struct tpm_rsp_header hdr; - u8 moreData; - u32 capability; - u8 data[0]; /* capability dependent data */ -} PACKED; - -struct tpm2_req_pcr_allocate { - struct tpm_req_header hdr; - u32 authhandle; - u32 authblocksize; - struct tpm2_authblock authblock; - u32 count; - u8 tpms_pcr_selections[4]; -} PACKED; - -struct tpms_pcr_selection { - u16 hashAlg; - u8 sizeOfSelect; - u8 pcrSelect[0]; -} PACKED; - -struct tpml_pcr_selection { - u32 count; - struct tpms_pcr_selection selections[0]; -} PACKED; - - -/**************************************************************** - * ACPI TCPA table interface - ****************************************************************/ - -/* event types: 10.4.1 / table 11 */ -#define EV_POST_CODE 1 -#define EV_NO_ACTION 3 -#define EV_SEPARATOR 4 -#define EV_ACTION 5 -#define EV_EVENT_TAG 6 -#define EV_COMPACT_HASH 12 -#define EV_IPL 13 -#define EV_IPL_PARTITION_DATA 14 - -struct tpm2_digest_value { - u16 hashAlg; - u8 hash[0]; /* size depends on hashAlg */ -} PACKED; - -struct tpm2_digest_values { - u32 count; - struct tpm2_digest_value digest[0]; -} PACKED; - -// Each entry in the TPM log contains: a tpm_log_header, a variable -// length digest, a tpm_log_trailer, and a variable length event. The -// 'digest' matches what is sent to the TPM hardware via the Extend -// command. On TPM1.2 the digest is a SHA1 hash; on TPM2.0 the digest -// contains a tpm2_digest_values struct followed by a variable number -// of tpm2_digest_value structs (as specified by the hardware via the -// TPM2_CAP_PCRS request). -struct tpm_log_header { - u32 pcrindex; - u32 eventtype; - u8 digest[0]; -} PACKED; - -struct tpm_log_trailer { - u32 eventdatasize; - u8 event[0]; -} PACKED; - -struct TCG_EfiSpecIdEventStruct { - u8 signature[16]; - u32 platformClass; - u8 specVersionMinor; - u8 specVersionMajor; - u8 specErrata; - u8 uintnSize; - u32 numberOfAlgorithms; - struct TCG_EfiSpecIdEventAlgorithmSize { - u16 algorithmId; - u16 digestSize; - } digestSizes[]; - /* - u8 vendorInfoSize; - u8 vendorInfo[0]; - */ -} PACKED; - -#define TPM_TCPA_ACPI_CLASS_CLIENT 0 - -struct pcctes -{ - u32 eventid; - u32 eventdatasize; - u8 digest[SHA1_BUFSIZE]; -} PACKED; - -struct pcctes_romex -{ - u32 eventid; - u32 eventdatasize; - u16 reserved; - u16 pfa; - u8 digest[SHA1_BUFSIZE]; -} PACKED; - - -/**************************************************************** - * Physical presence interface - ****************************************************************/ - -#define TPM_STATE_ENABLED 1 -#define TPM_STATE_ACTIVE 2 -#define TPM_STATE_OWNED 4 -#define TPM_STATE_OWNERINSTALL 8 - -#define TPM_PPI_OP_NOOP 0 -#define TPM_PPI_OP_ENABLE 1 -#define TPM_PPI_OP_DISABLE 2 -#define TPM_PPI_OP_ACTIVATE 3 -#define TPM_PPI_OP_DEACTIVATE 4 -#define TPM_PPI_OP_CLEAR 5 -#define TPM_PPI_OP_SET_OWNERINSTALL_TRUE 8 -#define TPM_PPI_OP_SET_OWNERINSTALL_FALSE 9 - -#endif // tcg.h diff --git a/payloads/external/SeaBIOS/src/std/vbe.h b/payloads/external/SeaBIOS/src/std/vbe.h deleted file mode 100644 index 94b4ad86..00000000 --- a/payloads/external/SeaBIOS/src/std/vbe.h +++ /dev/null @@ -1,156 +0,0 @@ -#ifndef __VBE_H -#define __VBE_H - -#include "types.h" // u8 - -#define VESA_SIGNATURE 0x41534556 // VESA -#define VBE2_SIGNATURE 0x32454256 // VBE2 - -struct vbe_info { - u32 signature; - u16 version; - struct segoff_s oem_string; - u32 capabilities; - struct segoff_s video_mode; - u16 total_memory; - u16 oem_revision; - struct segoff_s oem_vendor_string; - struct segoff_s oem_product_string; - struct segoff_s oem_revision_string; - u8 reserved[222]; -} PACKED; - -struct vbe_mode_info { - /* VBE */ - u16 mode_attributes; - u8 winA_attributes; - u8 winB_attributes; - u16 win_granularity; - u16 win_size; - u16 winA_seg; - u16 winB_seg; - struct segoff_s win_func_ptr; - u16 bytes_per_scanline; - /* VBE 1.2 */ - u16 xres; - u16 yres; - u8 xcharsize; - u8 ycharsize; - u8 planes; - u8 bits_per_pixel; - u8 banks; - u8 mem_model; - u8 bank_size; - u8 pages; - u8 reserved0; - /* Direct Color */ - u8 red_size; - u8 red_pos; - u8 green_size; - u8 green_pos; - u8 blue_size; - u8 blue_pos; - u8 alpha_size; - u8 alpha_pos; - u8 directcolor_info; - /* VBE 2.0 */ - u32 phys_base; - u32 reserved1; - u16 reserved2; - /* VBE 3.0 */ - u16 linear_bytes_per_scanline; - u8 bank_pages; - u8 linear_pages; - u8 linear_red_size; - u8 linear_red_pos; - u8 linear_green_size; - u8 linear_green_pos; - u8 linear_blue_size; - u8 linear_blue_pos; - u8 linear_alpha_size; - u8 linear_alpha_pos; - u32 pixclock_max; - u8 reserved[190]; -} PACKED; - -struct vbe_crtc_info { - u16 horiz_total; - u16 horiz_sync_start; - u16 horiz_sync_end; - u16 vert_total; - u16 vert_sync_start; - u16 vert_sync_end; - u8 flags; - u32 pixclock; - u16 refresh_rate; - u8 reserved[40]; -} PACKED; - -/* VBE Return Status Info */ -/* AL */ -#define VBE_RETURN_STATUS_SUPPORTED 0x4F -#define VBE_RETURN_STATUS_UNSUPPORTED 0x00 -/* AH */ -#define VBE_RETURN_STATUS_SUCCESSFULL 0x00 -#define VBE_RETURN_STATUS_FAILED 0x01 -#define VBE_RETURN_STATUS_NOT_SUPPORTED 0x02 -#define VBE_RETURN_STATUS_INVALID 0x03 - -/* VBE Mode Numbers */ - -#define VBE_MODE_VESA_DEFINED 0x0100 -#define VBE_MODE_REFRESH_RATE_USE_CRTC 0x0800 -#define VBE_MODE_LINEAR_FRAME_BUFFER 0x4000 -#define VBE_MODE_PRESERVE_DISPLAY_MEMORY 0x8000 - -#define VBE_VESA_MODE_END_OF_LIST 0xFFFF - -/* Capabilities */ - -#define VBE_CAPABILITY_8BIT_DAC 0x0001 -#define VBE_CAPABILITY_NOT_VGA_COMPATIBLE 0x0002 -#define VBE_CAPABILITY_RAMDAC_USE_BLANK_BIT 0x0004 -#define VBE_CAPABILITY_STEREOSCOPIC_SUPPORT 0x0008 -#define VBE_CAPABILITY_STEREO_VIA_VESA_EVC 0x0010 - -/* Mode Attributes */ - -#define VBE_MODE_ATTRIBUTE_SUPPORTED 0x0001 -#define VBE_MODE_ATTRIBUTE_EXTENDED_INFORMATION_AVAILABLE 0x0002 -#define VBE_MODE_ATTRIBUTE_TTY_BIOS_SUPPORT 0x0004 -#define VBE_MODE_ATTRIBUTE_COLOR_MODE 0x0008 -#define VBE_MODE_ATTRIBUTE_GRAPHICS_MODE 0x0010 -#define VBE_MODE_ATTRIBUTE_NOT_VGA_COMPATIBLE 0x0020 -#define VBE_MODE_ATTRIBUTE_NO_VGA_COMPATIBLE_WINDOW 0x0040 -#define VBE_MODE_ATTRIBUTE_LINEAR_FRAME_BUFFER_MODE 0x0080 -#define VBE_MODE_ATTRIBUTE_DOUBLE_SCAN_MODE 0x0100 -#define VBE_MODE_ATTRIBUTE_INTERLACE_MODE 0x0200 -#define VBE_MODE_ATTRIBUTE_HARDWARE_TRIPLE_BUFFER 0x0400 -#define VBE_MODE_ATTRIBUTE_HARDWARE_STEREOSCOPIC_DISPLAY 0x0800 -#define VBE_MODE_ATTRIBUTE_DUAL_DISPLAY_START_ADDRESS 0x1000 - -#define VBE_MODE_ATTTRIBUTE_LFB_ONLY ( VBE_MODE_ATTRIBUTE_NO_VGA_COMPATIBLE_WINDOW | VBE_MODE_ATTRIBUTE_LINEAR_FRAME_BUFFER_MODE ) - -/* Window attributes */ - -#define VBE_WINDOW_ATTRIBUTE_RELOCATABLE 0x01 -#define VBE_WINDOW_ATTRIBUTE_READABLE 0x02 -#define VBE_WINDOW_ATTRIBUTE_WRITEABLE 0x04 - -/* Memory model */ - -#define VBE_MEMORYMODEL_TEXT_MODE 0x00 -#define VBE_MEMORYMODEL_CGA_GRAPHICS 0x01 -#define VBE_MEMORYMODEL_HERCULES_GRAPHICS 0x02 -#define VBE_MEMORYMODEL_PLANAR 0x03 -#define VBE_MEMORYMODEL_PACKED_PIXEL 0x04 -#define VBE_MEMORYMODEL_NON_CHAIN_4_256 0x05 -#define VBE_MEMORYMODEL_DIRECT_COLOR 0x06 -#define VBE_MEMORYMODEL_YUV 0x07 - -/* DirectColorModeInfo */ - -#define VBE_DIRECTCOLOR_COLOR_RAMP_PROGRAMMABLE 0x01 -#define VBE_DIRECTCOLOR_RESERVED_BITS_AVAILABLE 0x02 - -#endif diff --git a/payloads/external/SeaBIOS/src/std/vga.h b/payloads/external/SeaBIOS/src/std/vga.h deleted file mode 100644 index de9ec750..00000000 --- a/payloads/external/SeaBIOS/src/std/vga.h +++ /dev/null @@ -1,63 +0,0 @@ -#ifndef __VGA_H -#define __VGA_H -// Standard structure definitions for vgabios video tables - -#include "types.h" // u8 - -// standard BIOS Video Parameter Table -struct video_param_s { - u8 twidth; - u8 theightm1; - u8 cheight; - u16 slength; - u8 sequ_regs[4]; - u8 miscreg; - u8 crtc_regs[25]; - u8 actl_regs[20]; - u8 grdc_regs[9]; -} PACKED; - -// Standard Video Save Pointer Table -struct video_save_pointer_s { - struct segoff_s videoparam; - struct segoff_s paramdynamicsave; - struct segoff_s textcharset; - struct segoff_s graphcharset; - struct segoff_s secsavepointer; - u8 reserved[8]; -} PACKED; - -// Data returned by int101B -struct video_func_static { - u32 modes; - u8 reserved_0x04[3]; - u8 scanlines; - u8 cblocks; - u8 active_cblocks; - u16 misc_flags; - u8 reserved_0x0c[2]; - u8 save_flags; - u8 reserved_0x0f; -} PACKED; - -struct video_func_info { - struct segoff_s static_functionality; - u8 bda_0x49[30]; - u8 bda_0x84[3]; - u8 dcc_index; - u8 dcc_alt; - u16 colors; - u8 pages; - u8 scan_lines; - u8 primary_char; - u8 secondar_char; - u8 misc; - u8 non_vga_mode; - u8 reserved_2f[2]; - u8 video_mem; - u8 save_flags; - u8 disp_info; - u8 reserved_34[12]; -} PACKED; - -#endif // vga.h diff --git a/payloads/external/SeaBIOS/src/string.c b/payloads/external/SeaBIOS/src/string.c deleted file mode 100644 index adb8198f..00000000 --- a/payloads/external/SeaBIOS/src/string.c +++ /dev/null @@ -1,251 +0,0 @@ -// String manipulation functions. -// -// Copyright (C) 2008-2013 Kevin O'Connor <kevin@koconnor.net> -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "stacks.h" // yield -#include "string.h" // memcpy -#include "farptr.h" // SET_SEG - - -/**************************************************************** - * String ops - ****************************************************************/ - -// Sum the bytes in the specified area. -u8 -checksum_far(u16 buf_seg, void *buf_far, u32 len) -{ - SET_SEG(ES, buf_seg); - u32 i; - u8 sum = 0; - for (i=0; i<len; i++) - sum += GET_VAR(ES, ((u8*)buf_far)[i]); - return sum; -} - -u8 -checksum(void *buf, u32 len) -{ - return checksum_far(GET_SEG(SS), buf, len); -} - -size_t -strlen(const char *s) -{ - if (__builtin_constant_p(s)) - return __builtin_strlen(s); - const char *p = s; - while (*p) - p++; - return p-s; -} - -int -memcmp_far(u16 s1seg, const void *s1, u16 s2seg, const void *s2, size_t n) -{ - while (n--) { - int d = GET_FARVAR(s1seg, *(u8*)s1) - GET_FARVAR(s2seg, *(u8*)s2); - if (d) - return d < 0 ? -1 : 1; - s1++; - s2++; - } - return 0; -} - -// Compare two areas of memory. -int -memcmp(const void *s1, const void *s2, size_t n) -{ - while (n) { - if (*(u8*)s1 != *(u8*)s2) - return *(u8*)s1 < *(u8*)s2 ? -1 : 1; - s1++; - s2++; - n--; - } - return 0; -} - -// Compare two strings. -int -strcmp(const char *s1, const char *s2) -{ - for (;;) { - if (*s1 != *s2) - return *s1 < *s2 ? -1 : 1; - if (! *s1) - return 0; - s1++; - s2++; - } -} - -inline void -memset_far(u16 d_seg, void *d_far, u8 c, size_t len) -{ - SET_SEG(ES, d_seg); - asm volatile( - "rep stosb %%es:(%%di)" - : "+c"(len), "+D"(d_far) - : "a"(c), "m" (__segment_ES) - : "cc", "memory"); -} - -inline void -memset16_far(u16 d_seg, void *d_far, u16 c, size_t len) -{ - len /= 2; - SET_SEG(ES, d_seg); - asm volatile( - "rep stosw %%es:(%%di)" - : "+c"(len), "+D"(d_far) - : "a"(c), "m" (__segment_ES) - : "cc", "memory"); -} - -void * -memset(void *s, int c, size_t n) -{ - while (n) - ((char *)s)[--n] = c; - return s; -} - -void memset_fl(void *ptr, u8 val, size_t size) -{ - if (MODESEGMENT) - memset_far(FLATPTR_TO_SEG(ptr), (void*)(FLATPTR_TO_OFFSET(ptr)), - val, size); - else - memset(ptr, val, size); -} - -inline void -memcpy_far(u16 d_seg, void *d_far, u16 s_seg, const void *s_far, size_t len) -{ - SET_SEG(ES, d_seg); - u16 bkup_ds; - asm volatile( - "movw %%ds, %w0\n" - "movw %w4, %%ds\n" - "rep movsb (%%si),%%es:(%%di)\n" - "movw %w0, %%ds" - : "=&r"(bkup_ds), "+c"(len), "+S"(s_far), "+D"(d_far) - : "r"(s_seg), "m" (__segment_ES) - : "cc", "memory"); -} - -inline void -memcpy_fl(void *d_fl, const void *s_fl, size_t len) -{ - if (MODESEGMENT) - memcpy_far(FLATPTR_TO_SEG(d_fl), (void*)FLATPTR_TO_OFFSET(d_fl) - , FLATPTR_TO_SEG(s_fl), (void*)FLATPTR_TO_OFFSET(s_fl) - , len); - else - memcpy(d_fl, s_fl, len); -} - -void * -#undef memcpy -memcpy(void *d1, const void *s1, size_t len) -#if MODESEGMENT == 0 -#define memcpy __builtin_memcpy -#endif -{ - SET_SEG(ES, GET_SEG(SS)); - void *d = d1; - if (((u32)d1 | (u32)s1 | len) & 3) { - // non-aligned memcpy - asm volatile( - "rep movsb (%%esi),%%es:(%%edi)" - : "+c"(len), "+S"(s1), "+D"(d) - : "m" (__segment_ES) : "cc", "memory"); - return d1; - } - // Common case - use 4-byte copy - len /= 4; - asm volatile( - "rep movsl (%%esi),%%es:(%%edi)" - : "+c"(len), "+S"(s1), "+D"(d) - : "m" (__segment_ES) : "cc", "memory"); - return d1; -} - -// Copy to/from memory mapped IO. IO mem is very slow, so yield -// periodically. -void -iomemcpy(void *d, const void *s, u32 len) -{ - ASSERT32FLAT(); - yield(); - while (len > 3) { - u32 copylen = len; - if (copylen > 2048) - copylen = 2048; - copylen /= 4; - len -= copylen * 4; - asm volatile( - "rep movsl (%%esi),%%es:(%%edi)" - : "+c"(copylen), "+S"(s), "+D"(d) - : : "cc", "memory"); - yield(); - } - if (len) - // Copy any remaining bytes. - memcpy(d, s, len); -} - -void * -memmove(void *d, const void *s, size_t len) -{ - if (s >= d) - return memcpy(d, s, len); - - d += len-1; - s += len-1; - while (len--) { - *(char*)d = *(char*)s; - d--; - s--; - } - - return d; -} - -// Copy a string - truncating it if necessary. -char * -strtcpy(char *dest, const char *src, size_t len) -{ - char *d = dest; - while (--len && *src != '\0') - *d++ = *src++; - *d = '\0'; - return dest; -} - -// locate first occurrence of character c in the string s -char * -strchr(const char *s, int c) -{ - for (; *s; s++) - if (*s == c) - return (char*)s; - return NULL; -} - -// Remove any trailing blank characters (spaces, new lines, carriage returns) -char * -nullTrailingSpace(char *buf) -{ - int len = strlen(buf); - char *end = &buf[len-1]; - while (end >= buf && *end <= ' ') - *(end--) = '\0'; - while (*buf && *buf <= ' ') - buf++; - return buf; -} diff --git a/payloads/external/SeaBIOS/src/string.h b/payloads/external/SeaBIOS/src/string.h deleted file mode 100644 index d069989d..00000000 --- a/payloads/external/SeaBIOS/src/string.h +++ /dev/null @@ -1,31 +0,0 @@ -// String manipulation function defs. -#ifndef __STRING_H -#define __STRING_H - -#include "types.h" // u32 - -// string.c -u8 checksum_far(u16 buf_seg, void *buf_far, u32 len); -u8 checksum(void *buf, u32 len); -size_t strlen(const char *s); -int memcmp_far(u16 s1seg, const void *s1, u16 s2seg, const void *s2, size_t n); -int memcmp(const void *s1, const void *s2, size_t n); -int strcmp(const char *s1, const char *s2); -void memset_far(u16 d_seg, void *d_far, u8 c, size_t len); -void memset16_far(u16 d_seg, void *d_far, u16 c, size_t len); -void *memset(void *s, int c, size_t n); -void memset_fl(void *ptr, u8 val, size_t size); -void memcpy_far(u16 d_seg, void *d_far - , u16 s_seg, const void *s_far, size_t len); -void memcpy_fl(void *d_fl, const void *s_fl, size_t len); -void *memcpy(void *d1, const void *s1, size_t len); -#if MODESEGMENT == 0 -#define memcpy __builtin_memcpy -#endif -void iomemcpy(void *d, const void *s, u32 len); -void *memmove(void *d, const void *s, size_t len); -char *strtcpy(char *dest, const char *src, size_t len); -char *strchr(const char *s, int c); -char *nullTrailingSpace(char *buf); - -#endif // string.h diff --git a/payloads/external/SeaBIOS/src/system.c b/payloads/external/SeaBIOS/src/system.c deleted file mode 100644 index 438e60e2..00000000 --- a/payloads/external/SeaBIOS/src/system.c +++ /dev/null @@ -1,357 +0,0 @@ -// Handler for int 0x15 "system" calls -// -// Copyright (C) 2008 Kevin O'Connor <kevin@koconnor.net> -// Copyright (C) 2002 MandrakeSoft S.A. -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "biosvar.h" // GET_GLOBAL -#include "bregs.h" // struct bregs -#include "e820map.h" // E820_RAM -#include "hw/pic.h" // pic_reset -#include "malloc.h" // LegacyRamSize -#include "output.h" // debug_enter -#include "string.h" // memcpy_far -#include "util.h" // handle_1553 -#include "x86.h" // set_a20 - -static void -handle_152400(struct bregs *regs) -{ - set_a20(0); - set_code_success(regs); -} - -static void -handle_152401(struct bregs *regs) -{ - set_a20(1); - set_code_success(regs); -} - -static void -handle_152402(struct bregs *regs) -{ - regs->al = get_a20(); - set_code_success(regs); -} - -static void -handle_152403(struct bregs *regs) -{ - regs->bx = 3; - set_code_success(regs); -} - -static void -handle_1524XX(struct bregs *regs) -{ - set_code_unimplemented(regs, RET_EUNSUPPORTED); -} - -static void -handle_1524(struct bregs *regs) -{ - switch (regs->al) { - case 0x00: handle_152400(regs); break; - case 0x01: handle_152401(regs); break; - case 0x02: handle_152402(regs); break; - case 0x03: handle_152403(regs); break; - default: handle_1524XX(regs); break; - } -} - -// removable media eject -static void -handle_1552(struct bregs *regs) -{ - set_code_success(regs); -} - -static void -handle_1587(struct bregs *regs) -{ - // +++ should probably have descriptor checks - // +++ should have exception handlers - - u8 prev_a20_enable = set_a20(1); // enable A20 line - - // 128K max of transfer on 386+ ??? - // source == destination ??? - - // ES:SI points to descriptor table - // offset use initially comments - // ============================================== - // 00..07 Unused zeros Null descriptor - // 08..0f GDT zeros filled in by BIOS - // 10..17 source ssssssss source of data - // 18..1f dest dddddddd destination of data - // 20..27 CS zeros filled in by BIOS - // 28..2f SS zeros filled in by BIOS - -// check for access rights of source & dest here - - // Initialize GDT descriptor - u64 *gdt_far = (void*)(regs->si + 0); - u16 gdt_seg = regs->es; - u32 loc = (u32)MAKE_FLATPTR(gdt_seg, gdt_far); - SET_FARVAR(gdt_seg, gdt_far[1], GDT_DATA | GDT_LIMIT((6*sizeof(u64))-1) - | GDT_BASE(loc)); - // Initialize CS descriptor - u64 lim = GDT_LIMIT(0x0ffff); - if (in_post()) - lim = GDT_GRANLIMIT(0xffffffff); - SET_FARVAR(gdt_seg, gdt_far[4], GDT_CODE | lim | GDT_BASE(BUILD_BIOS_ADDR)); - // Initialize SS descriptor - loc = (u32)MAKE_FLATPTR(GET_SEG(SS), 0); - SET_FARVAR(gdt_seg, gdt_far[5], GDT_DATA | lim | GDT_BASE(loc)); - - SET_SEG(ES, gdt_seg); - u16 count = regs->cx, si = 0, di = 0; - asm volatile( - // Load new descriptor tables - " lgdtw %%es:(1<<3)(%%eax)\n" - " lidtw %%cs:pmode_IDT_info\n" - - // Enable protected mode - " movl %%cr0, %%eax\n" - " orl $" __stringify(CR0_PE) ", %%eax\n" - " movl %%eax, %%cr0\n" - - // far jump to flush CPU queue after transition to protected mode - " ljmpw $(4<<3), $1f\n" - - // GDT points to valid descriptor table, now load DS, ES - "1:movw $(2<<3), %%ax\n" // 2nd descriptor in table, TI=GDT, RPL=00 - " movw %%ax, %%ds\n" - " movw $(3<<3), %%ax\n" // 3rd descriptor in table, TI=GDT, RPL=00 - " movw %%ax, %%es\n" - - // memcpy CX words using 32bit memcpy if applicable - " testw $1, %%cx\n" - " jnz 3f\n" - " shrw $1, %%cx\n" - " rep movsl %%ds:(%%si), %%es:(%%di)\n" - - // Restore DS and ES segment limits to 0xffff - "2:movw $(5<<3), %%ax\n" // 5th descriptor in table (SS) - " movw %%ax, %%ds\n" - " movw %%ax, %%es\n" - - // Disable protected mode - " movl %%cr0, %%eax\n" - " andl $~" __stringify(CR0_PE) ", %%eax\n" - " movl %%eax, %%cr0\n" - - // far jump to flush CPU queue after transition to real mode - " ljmpw $" __stringify(SEG_BIOS) ", $4f\n" - - // Slower 16bit copy method - "3:rep movsw %%ds:(%%si), %%es:(%%di)\n" - " jmp 2b\n" - - // restore IDT to normal real-mode defaults - "4:lidtw %%cs:rmode_IDT_info\n" - - // Restore %ds (from %ss) - " movw %%ss, %%ax\n" - " movw %%ax, %%ds\n" - : "+a" (gdt_far), "+c"(count), "+m" (__segment_ES) - : "S" (si), "D" (di) - : "cc"); - - set_a20(prev_a20_enable); - - set_code_success(regs); -} - -// Get the amount of extended memory (above 1M) -static void -handle_1588(struct bregs *regs) -{ - u32 rs = GET_GLOBAL(LegacyRamSize); - - // According to Ralf Brown's interrupt the limit should be 15M, - // but real machines mostly return max. 63M. - if (rs > 64*1024*1024) - regs->ax = 63 * 1024; - else - regs->ax = (rs - 1*1024*1024) / 1024; - set_success(regs); -} - -// Switch to protected mode -void VISIBLE16 -handle_1589(struct bregs *regs) -{ - debug_enter(regs, DEBUG_HDL_15); - set_a20(1); - - pic_reset(regs->bl, regs->bh); - - u64 *gdt_far = (void*)(regs->si + 0); - u16 gdt_seg = regs->es; - SET_FARVAR(gdt_seg, gdt_far[7], GDT_CODE | GDT_LIMIT(BUILD_BIOS_SIZE-1) - | GDT_BASE(BUILD_BIOS_ADDR)); - - regs->ds = 3<<3; // 3rd gdt descriptor is %ds - regs->es = 4<<3; // 4th gdt descriptor is %es - regs->code.seg = 6<<3; // 6th gdt descriptor is %cs - - set_code_success(regs); - - asm volatile( - // Load new descriptor tables - " lgdtw %%es:(1<<3)(%%si)\n" - " lidtw %%es:(2<<3)(%%si)\n" - - // Enable protected mode - " movl %%cr0, %%eax\n" - " orl $" __stringify(CR0_PE) ", %%eax\n" - " movl %%eax, %%cr0\n" - - // far jump to flush CPU queue after transition to protected mode - " ljmpw $(7<<3), $1f\n" - - // GDT points to valid descriptor table, now load SS - "1:movw $(5<<3), %%ax\n" - " movw %%ax, %%ds\n" - " movw %%ax, %%ss\n" - : - : "S"(gdt_far), "m" (__segment_ES) - : "eax", "cc"); -} - -// Device busy interrupt. Called by Int 16h when no key available -static void -handle_1590(struct bregs *regs) -{ -} - -// Interrupt complete. Called by Int 16h when key becomes available -static void -handle_1591(struct bregs *regs) -{ -} - -// keyboard intercept -static void -handle_154f(struct bregs *regs) -{ - set_invalid_silent(regs); -} - -static void -handle_15c0(struct bregs *regs) -{ - regs->es = SEG_BIOS; - regs->bx = (u32)&BIOS_CONFIG_TABLE; - set_code_success(regs); -} - -static void -handle_15c1(struct bregs *regs) -{ - regs->es = get_ebda_seg(); - set_success(regs); -} - -static void -handle_15e801(struct bregs *regs) -{ - // my real system sets ax and bx to 0 - // this is confirmed by Ralph Brown list - // but syslinux v1.48 is known to behave - // strangely if ax is set to 0 - // regs.u.r16.ax = 0; - // regs.u.r16.bx = 0; - - u32 rs = GET_GLOBAL(LegacyRamSize); - - // Get the amount of extended memory (above 1M) - if (rs > 16*1024*1024) { - // limit to 15M - regs->cx = 15*1024; - // Get the amount of extended memory above 16M in 64k blocks - regs->dx = (rs - 16*1024*1024) / (64*1024); - } else { - regs->cx = (rs - 1*1024*1024) / 1024; - regs->dx = 0; - } - - // Set configured memory equal to extended memory - regs->ax = regs->cx; - regs->bx = regs->dx; - - set_success(regs); -} - -static void -handle_15e820(struct bregs *regs) -{ - int count = GET_GLOBAL(e820_count); - if (regs->edx != 0x534D4150 || regs->bx >= count - || regs->ecx < sizeof(e820_list[0])) { - set_code_invalid(regs, RET_EUNSUPPORTED); - return; - } - - memcpy_far(regs->es, (void*)(regs->di+0) - , get_global_seg(), &e820_list[regs->bx] - , sizeof(e820_list[0])); - if (regs->bx == count-1) - regs->ebx = 0; - else - regs->ebx++; - regs->eax = 0x534D4150; - regs->ecx = sizeof(e820_list[0]); - set_success(regs); -} - -static void -handle_15e8XX(struct bregs *regs) -{ - set_code_unimplemented(regs, RET_EUNSUPPORTED); -} - -static void -handle_15e8(struct bregs *regs) -{ - switch (regs->al) { - case 0x01: handle_15e801(regs); break; - case 0x20: handle_15e820(regs); break; - default: handle_15e8XX(regs); break; - } -} - -static void -handle_15XX(struct bregs *regs) -{ - set_code_unimplemented(regs, RET_EUNSUPPORTED); -} - -// INT 15h System Services Entry Point -void VISIBLE16 -handle_15(struct bregs *regs) -{ - debug_enter(regs, DEBUG_HDL_15); - switch (regs->ah) { - case 0x24: handle_1524(regs); break; - case 0x4f: handle_154f(regs); break; - case 0x52: handle_1552(regs); break; - case 0x53: handle_1553(regs); break; - case 0x5f: handle_155f(regs); break; - case 0x7f: handle_157f(regs); break; - case 0x83: handle_1583(regs); break; - case 0x86: handle_1586(regs); break; - case 0x87: handle_1587(regs); break; - case 0x88: handle_1588(regs); break; - case 0x90: handle_1590(regs); break; - case 0x91: handle_1591(regs); break; - case 0xc0: handle_15c0(regs); break; - case 0xc1: handle_15c1(regs); break; - case 0xc2: handle_15c2(regs); break; - case 0xe8: handle_15e8(regs); break; - default: handle_15XX(regs); break; - } -} diff --git a/payloads/external/SeaBIOS/src/tcgbios.c b/payloads/external/SeaBIOS/src/tcgbios.c deleted file mode 100644 index 31f4d7b8..00000000 --- a/payloads/external/SeaBIOS/src/tcgbios.c +++ /dev/null @@ -1,2321 +0,0 @@ -// Implementation of the TCG BIOS extension according to the specification -// described in specs found at -// http://www.trustedcomputinggroup.org/resources/pc_client_work_group_specific_implementation_specification_for_conventional_bios -// -// Copyright (C) 2006-2011, 2014, 2015 IBM Corporation -// -// Authors: -// Stefan Berger <stefanb@linux.vnet.ibm.com> -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "bregs.h" // struct bregs -#include "byteorder.h" // cpu_to_* -#include "config.h" // CONFIG_TCGBIOS -#include "farptr.h" // MAKE_FLATPTR -#include "fw/paravirt.h" // runningOnXen -#include "hw/tpm_drivers.h" // tpm_drivers[] -#include "output.h" // dprintf -#include "sha.h" // sha1, sha256, ... -#include "std/acpi.h" // RSDP_SIGNATURE, rsdt_descriptor -#include "std/smbios.h" // struct smbios_entry_point -#include "std/tcg.h" // TCG_PC_LOGOVERFLOW -#include "string.h" // checksum -#include "tcgbios.h"// tpm_*, prototypes -#include "util.h" // printf, get_keystroke -#include "stacks.h" // wait_threads, reset -#include "malloc.h" // malloc_high - - -/**************************************************************** - * ACPI TCPA table interface - ****************************************************************/ - -struct { - /* length of the TCPA log buffer */ - u32 log_area_minimum_length; - - /* start address of TCPA log buffer */ - u8 * log_area_start_address; - - /* number of log entries written */ - u32 entry_count; - - /* address to write next log entry to */ - u8 * log_area_next_entry; - - /* address of last entry written (need for TCG_StatusCheck) */ - u8 * log_area_last_entry; -} tpm_state VARLOW; - -static int tpm_set_log_area(u8 *log_area_start_address, - u32 log_area_minimum_length) -{ - if (!log_area_start_address || !log_area_minimum_length) - return -1; - - memset(log_area_start_address, 0, log_area_minimum_length); - tpm_state.log_area_start_address = log_area_start_address; - tpm_state.log_area_minimum_length = log_area_minimum_length; - tpm_state.log_area_next_entry = log_area_start_address; - tpm_state.log_area_last_entry = NULL; - tpm_state.entry_count = 0; - return 0; -} - -static int -tpm_tcpa_probe(void) -{ - struct tcpa_descriptor_rev2 *tcpa = find_acpi_table(TCPA_SIGNATURE); - if (!tcpa) - return -1; - - dprintf(DEBUG_tcg, "TCGBIOS: TCPA: LASA = %p, LAML = %u\n", - (u8 *)(long)tcpa->log_area_start_address, - tcpa->log_area_minimum_length); - - return tpm_set_log_area((u8*)(long)tcpa->log_area_start_address, - tcpa->log_area_minimum_length); -} - -static int -tpm_tpm2_probe(void) -{ - struct tpm2_descriptor_rev2 *tpm2 = find_acpi_table(TPM2_SIGNATURE); - if (!tpm2) - return -1; - - if (tpm2->length < 76) - return -1; - - dprintf(DEBUG_tcg, "TCGBIOS: TPM2: LASA = %p, LAML = %u\n", - (u8 *)(long)tpm2->log_area_start_address, - tpm2->log_area_minimum_length); - - return tpm_set_log_area((u8*)(long)tpm2->log_area_start_address, - tpm2->log_area_minimum_length); -} - -/* - * Extend the ACPI log with the given entry by copying the - * entry data into the log. - * Input - * entry : The header data to use (including the variable length digest) - * digest_len : Length of the digest in 'entry' - * event : Pointer to the event body to be copied into the log - * event_len : Length of 'event' - * - * Output: - * Returns an error code in case of faiure, 0 in case of success - */ -static int -tpm_log_event(struct tpm_log_header *entry, int digest_len - , const void *event, int event_len) -{ - dprintf(DEBUG_tcg, "TCGBIOS: LASA = %p, next entry = %p\n", - tpm_state.log_area_start_address, tpm_state.log_area_next_entry); - - if (tpm_state.log_area_next_entry == NULL) - return -1; - - u32 size = (sizeof(*entry) + digest_len - + sizeof(struct tpm_log_trailer) + event_len); - u32 logsize = (tpm_state.log_area_next_entry + size - - tpm_state.log_area_start_address); - if (logsize > tpm_state.log_area_minimum_length) { - dprintf(DEBUG_tcg, "TCGBIOS: LOG OVERFLOW: size = %d\n", size); - return -1; - } - - void *dest = tpm_state.log_area_next_entry; - memcpy(dest, entry, sizeof(*entry) + digest_len); - struct tpm_log_trailer *t = dest + sizeof(*entry) + digest_len; - t->eventdatasize = event_len; - memcpy(t->event, event, event_len); - - tpm_state.log_area_last_entry = tpm_state.log_area_next_entry; - tpm_state.log_area_next_entry += size; - tpm_state.entry_count++; - - return 0; -} - - -/**************************************************************** - * Digest formatting - ****************************************************************/ - -static TPMVersion TPM_version; -static u32 tpm20_pcr_selection_size; -static struct tpml_pcr_selection *tpm20_pcr_selection; - -// A 'struct tpm_log_entry' is a local data structure containing a -// 'tpm_log_header' followed by space for the maximum supported -// digest. (The digest is a sha1 hash on tpm1.2 or a series of -// tpm2_digest_value structs on tpm2.0) -struct tpm_log_entry { - struct tpm_log_header hdr; - u8 pad[sizeof(struct tpm2_digest_values) - + 8 * sizeof(struct tpm2_digest_value) - + SHA1_BUFSIZE + SHA256_BUFSIZE + SHA384_BUFSIZE - + SHA512_BUFSIZE + SM3_256_BUFSIZE + SHA3_256_BUFSIZE - + SHA3_384_BUFSIZE + SHA3_512_BUFSIZE]; -} PACKED; - -static const struct hash_parameters { - u16 hashalg; - u8 hashalg_flag; - u8 hash_buffersize; - const char *name; - void (*hashfunc)(const u8 *data, u32 length, u8 *hash); -} hash_parameters[] = { - { - .hashalg = TPM2_ALG_SHA1, - .hashalg_flag = TPM2_ALG_SHA1_FLAG, - .hash_buffersize = SHA1_BUFSIZE, - .name = "SHA1", - .hashfunc = sha1, - }, { - .hashalg = TPM2_ALG_SHA256, - .hashalg_flag = TPM2_ALG_SHA256_FLAG, - .hash_buffersize = SHA256_BUFSIZE, - .name = "SHA256", - .hashfunc = sha256, - }, { - .hashalg = TPM2_ALG_SHA384, - .hashalg_flag = TPM2_ALG_SHA384_FLAG, - .hash_buffersize = SHA384_BUFSIZE, - .name = "SHA384", - .hashfunc = sha384, - }, { - .hashalg = TPM2_ALG_SHA512, - .hashalg_flag = TPM2_ALG_SHA512_FLAG, - .hash_buffersize = SHA512_BUFSIZE, - .name = "SHA512", - .hashfunc = sha512, - }, { - .hashalg = TPM2_ALG_SM3_256, - .hashalg_flag = TPM2_ALG_SM3_256_FLAG, - .hash_buffersize = SM3_256_BUFSIZE, - .name = "SM3-256", - }, { - .hashalg = TPM2_ALG_SHA3_256, - .hashalg_flag = TPM2_ALG_SHA3_256_FLAG, - .hash_buffersize = SHA3_256_BUFSIZE, - .name = "SHA3-256", - }, { - .hashalg = TPM2_ALG_SHA3_384, - .hashalg_flag = TPM2_ALG_SHA3_384_FLAG, - .hash_buffersize = SHA3_384_BUFSIZE, - .name = "SHA3-384", - }, { - .hashalg = TPM2_ALG_SHA3_512, - .hashalg_flag = TPM2_ALG_SHA3_512_FLAG, - .hash_buffersize = SHA3_512_BUFSIZE, - .name = "SHA3-512", - } -}; - -static int -tpm20_get_hash_buffersize(u16 hashAlg) -{ - unsigned i; - - for (i = 0; i < ARRAY_SIZE(hash_parameters); i++) { - if (hash_parameters[i].hashalg == hashAlg) - return hash_parameters[i].hash_buffersize; - } - return -1; -} - -static u8 -tpm20_hashalg_to_flag(u16 hashAlg) -{ - unsigned i; - - for (i = 0; i < ARRAY_SIZE(hash_parameters); i++) { - if (hash_parameters[i].hashalg == hashAlg) - return hash_parameters[i].hashalg_flag; - } - return 0; -} - -static u16 -tpm20_hashalg_flag_to_hashalg(u8 hashalg_flag) -{ - unsigned i; - - for (i = 0; i < ARRAY_SIZE(hash_parameters); i++) { - if (hash_parameters[i].hashalg_flag == hashalg_flag) - return hash_parameters[i].hashalg; - } - return 0; -} - -static const char * -tpm20_hashalg_flag_to_name(u8 hashalg_flag) -{ - unsigned i; - - for (i = 0; i < ARRAY_SIZE(hash_parameters); i++) { - if (hash_parameters[i].hashalg_flag == hashalg_flag) - return hash_parameters[i].name; - } - return NULL; -} - -static void tpm2_hash_data(u16 hashAlg, const u8 *data, u32 data_len, u8 *hash) -{ - unsigned i; - - for (i = 0; i < ARRAY_SIZE(hash_parameters); i++) { - if (hash_parameters[i].hashalg == hashAlg) { - if (hash_parameters[i].hashfunc) { - hash_parameters[i].hashfunc(data, data_len, hash); - } else { - memset(hash, 0xff, hash_parameters[i].hash_buffersize); - } - } - } -} - -// Add an entry at the start of the log describing digest formats -static int -tpm20_write_EfiSpecIdEventStruct(void) -{ - if (!tpm20_pcr_selection) - return -1; - - struct { - struct TCG_EfiSpecIdEventStruct hdr; - u8 pad[sizeof(struct tpm_log_entry) + sizeof(u8)]; - } event = { - .hdr.signature = "Spec ID Event03", - .hdr.platformClass = TPM_TCPA_ACPI_CLASS_CLIENT, - .hdr.specVersionMinor = 0, - .hdr.specVersionMajor = 2, - .hdr.specErrata = 2, - .hdr.uintnSize = 2, - }; - - struct tpms_pcr_selection *sel = tpm20_pcr_selection->selections; - void *nsel, *end = (void*)tpm20_pcr_selection + tpm20_pcr_selection_size; - - u32 count, numAlgs = 0; - for (count = 0; count < be32_to_cpu(tpm20_pcr_selection->count); count++) { - u8 sizeOfSelect = sel->sizeOfSelect; - - nsel = (void*)sel + sizeof(*sel) + sizeOfSelect; - if (nsel > end) - break; - - if (!sizeOfSelect || sel->pcrSelect[0] == 0) { - sel = nsel; - continue; - } - - int hsize = tpm20_get_hash_buffersize(be16_to_cpu(sel->hashAlg)); - if (hsize < 0) { - dprintf(DEBUG_tcg, "TPM is using an unsupported hash: %d\n", - be16_to_cpu(sel->hashAlg)); - return -1; - } - - int event_size = offsetof(struct TCG_EfiSpecIdEventStruct - , digestSizes[count+1]); - if (event_size > sizeof(event) - sizeof(u8)) { - dprintf(DEBUG_tcg, "EfiSpecIdEventStruct pad too small\n"); - return -1; - } - - event.hdr.digestSizes[numAlgs].algorithmId = be16_to_cpu(sel->hashAlg); - event.hdr.digestSizes[numAlgs].digestSize = hsize; - numAlgs++; - - sel = nsel; - } - - if (sel != end) { - dprintf(DEBUG_tcg, "Malformed pcr selection structure fron TPM\n"); - return -1; - } - - event.hdr.numberOfAlgorithms = numAlgs; - int event_size = offsetof(struct TCG_EfiSpecIdEventStruct - , digestSizes[numAlgs]); - u8 *vendorInfoSize = (void*)&event + event_size; - *vendorInfoSize = 0; - event_size += sizeof(*vendorInfoSize); - - struct tpm_log_entry le = { - .hdr.eventtype = EV_NO_ACTION, - }; - return tpm_log_event(&le.hdr, SHA1_BUFSIZE, &event, event_size); -} - -/* - * Build the TPM2 tpm2_digest_values data structure from the given hash. - * Follow the PCR bank configuration of the TPM and write the same hash - * in either truncated or zero-padded form in the areas of all the other - * hashes. For example, write the sha1 hash in the area of the sha256 - * hash and fill the remaining bytes with zeros. Or truncate the sha256 - * hash when writing it in the area of the sha1 hash. - * - * le: the log entry to build the digest in - * hashdata: the data to hash - * hashdata_len: the length of the hashdata - * bigEndian: whether to build in big endian format for the TPM or - * little endian for the log - * - * Returns the digest size; -1 on fatal error - */ -static int -tpm20_build_digest(struct tpm_log_entry *le, - const u8 *hashdata, u32 hashdata_len, int bigEndian) -{ - if (!tpm20_pcr_selection) - return -1; - - struct tpms_pcr_selection *sel = tpm20_pcr_selection->selections; - void *nsel, *end = (void*)tpm20_pcr_selection + tpm20_pcr_selection_size; - void *dest = le->hdr.digest + sizeof(struct tpm2_digest_values); - - u32 count, numAlgs = 0; - for (count = 0; count < be32_to_cpu(tpm20_pcr_selection->count); count++) { - u8 sizeOfSelect = sel->sizeOfSelect; - - nsel = (void*)sel + sizeof(*sel) + sizeOfSelect; - if (nsel > end) - break; - - /* PCR 0-7 unused? -- skip */ - if (!sizeOfSelect || sel->pcrSelect[0] == 0) { - sel = nsel; - continue; - } - - int hsize = tpm20_get_hash_buffersize(be16_to_cpu(sel->hashAlg)); - if (hsize < 0) { - dprintf(DEBUG_tcg, "TPM is using an unsupported hash: %d\n", - be16_to_cpu(sel->hashAlg)); - return -1; - } - - /* buffer size sanity check before writing */ - struct tpm2_digest_value *v = dest; - if (dest + sizeof(*v) + hsize > (void*)le + sizeof(*le)) { - dprintf(DEBUG_tcg, "tpm_log_entry is too small\n"); - return -1; - } - - if (bigEndian) - v->hashAlg = sel->hashAlg; - else - v->hashAlg = be16_to_cpu(sel->hashAlg); - - tpm2_hash_data(be16_to_cpu(sel->hashAlg), hashdata, hashdata_len, - v->hash); - - dest += sizeof(*v) + hsize; - sel = nsel; - - numAlgs++; - } - - if (sel != end) { - dprintf(DEBUG_tcg, "Malformed pcr selection structure fron TPM\n"); - return -1; - } - - struct tpm2_digest_values *v = (void*)le->hdr.digest; - if (bigEndian) - v->count = cpu_to_be32(numAlgs); - else - v->count = numAlgs; - - return dest - (void*)le->hdr.digest; -} - -static int -tpm12_build_digest(struct tpm_log_entry *le, - const u8 *hashdata, u32 hashdata_len) -{ - sha1(hashdata, hashdata_len, le->hdr.digest); - return SHA1_BUFSIZE; -} - -static int -tpm12_build_digest_direct(struct tpm_log_entry *le, const u8 *sha1) -{ - // On TPM 1.2 the digest contains just the SHA1 hash - memcpy(le->hdr.digest, sha1, SHA1_BUFSIZE); - return SHA1_BUFSIZE; -} - -static int -tpm_build_digest(struct tpm_log_entry *le, const u8 *hashdata, u32 hashdata_len - , int bigEndian) -{ - switch (TPM_version) { - case TPM_VERSION_1_2: - return tpm12_build_digest(le, hashdata, hashdata_len); - case TPM_VERSION_2: - return tpm20_build_digest(le, hashdata, hashdata_len, bigEndian); - } - return -1; -} - - -/**************************************************************** - * TPM hardware command wrappers - ****************************************************************/ - -// Helper function for sending tpm commands that take a single -// optional parameter (0, 1, or 2 bytes) and have no special response. -static int -tpm_simple_cmd(u8 locty, u32 ordinal - , int param_size, u16 param, enum tpmDurationType to_t) -{ - struct { - struct tpm_req_header trqh; - u16 param; - } PACKED req = { - .trqh.totlen = cpu_to_be32(sizeof(req.trqh) + param_size), - .trqh.ordinal = cpu_to_be32(ordinal), - .param = param_size == 2 ? cpu_to_be16(param) : param, - }; - switch (TPM_version) { - case TPM_VERSION_1_2: - req.trqh.tag = cpu_to_be16(TPM_TAG_RQU_CMD); - break; - case TPM_VERSION_2: - req.trqh.tag = cpu_to_be16(TPM2_ST_NO_SESSIONS); - break; - } - - u8 obuffer[64]; - struct tpm_rsp_header *trsh = (void*)obuffer; - u32 obuffer_len = sizeof(obuffer); - memset(obuffer, 0x0, sizeof(obuffer)); - - int ret = tpmhw_transmit(locty, &req.trqh, obuffer, &obuffer_len, to_t); - ret = ret ? -1 : be32_to_cpu(trsh->errcode); - dprintf(DEBUG_tcg, "Return from tpm_simple_cmd(%x, %x) = %x\n", - ordinal, param, ret); - return ret; -} - -static int -tpm20_getcapability(u32 capability, u32 property, u32 count, - struct tpm_rsp_header *rsp, u32 rsize) -{ - struct tpm2_req_getcapability trg = { - .hdr.tag = cpu_to_be16(TPM2_ST_NO_SESSIONS), - .hdr.totlen = cpu_to_be32(sizeof(trg)), - .hdr.ordinal = cpu_to_be32(TPM2_CC_GetCapability), - .capability = cpu_to_be32(capability), - .property = cpu_to_be32(property), - .propertycount = cpu_to_be32(count), - }; - - u32 resp_size = rsize; - int ret = tpmhw_transmit(0, &trg.hdr, rsp, &resp_size, - TPM_DURATION_TYPE_SHORT); - ret = (ret || - rsize < be32_to_cpu(rsp->totlen)) ? -1 : be32_to_cpu(rsp->errcode); - - dprintf(DEBUG_tcg, "TCGBIOS: Return value from sending TPM2_CC_GetCapability = 0x%08x\n", - ret); - - return ret; -} - -static int -tpm20_get_pcrbanks(void) -{ - u8 buffer[128]; - struct tpm2_res_getcapability *trg = - (struct tpm2_res_getcapability *)&buffer; - - int ret = tpm20_getcapability(TPM2_CAP_PCRS, 0, 8, &trg->hdr, - sizeof(buffer)); - if (ret) - return ret; - - /* defend against (broken) TPM sending packets that are too short */ - u32 resplen = be32_to_cpu(trg->hdr.totlen); - if (resplen <= offsetof(struct tpm2_res_getcapability, data)) - return -1; - - u32 size = resplen - offsetof(struct tpm2_res_getcapability, data); - /* we need a valid tpml_pcr_selection up to and including sizeOfSelect */ - if (size < offsetof(struct tpml_pcr_selection, selections) + - offsetof(struct tpms_pcr_selection, pcrSelect)) - return -1; - - tpm20_pcr_selection = malloc_high(size); - if (tpm20_pcr_selection) { - memcpy(tpm20_pcr_selection, &trg->data, size); - tpm20_pcr_selection_size = size; - } else { - warn_noalloc(); - ret = -1; - } - - return ret; -} - -static int -tpm20_get_suppt_pcrbanks(u8 *suppt_pcrbanks, u8 *active_pcrbanks) -{ - *suppt_pcrbanks = 0; - *active_pcrbanks = 0; - - if (!tpm20_pcr_selection) - return -1; - - struct tpms_pcr_selection *sel = tpm20_pcr_selection->selections; - void *end = (void*)tpm20_pcr_selection + tpm20_pcr_selection_size; - - while (1) { - u8 sizeOfSelect = sel->sizeOfSelect; - void *nsel = (void*)sel + sizeof(*sel) + sizeOfSelect; - if (nsel > end) - return 0; - - u16 hashalg = be16_to_cpu(sel->hashAlg); - u8 hashalg_flag = tpm20_hashalg_to_flag(hashalg); - - *suppt_pcrbanks |= hashalg_flag; - - unsigned i; - for (i = 0; i < sizeOfSelect; i++) { - if (sel->pcrSelect[i]) { - *active_pcrbanks |= hashalg_flag; - break; - } - } - - sel = nsel; - } -} - -static int -tpm20_set_pcrbanks(u32 active_banks) -{ - struct tpm2_req_pcr_allocate trpa = { - .hdr.tag = cpu_to_be16(TPM2_ST_SESSIONS), - .hdr.ordinal = cpu_to_be32(TPM2_CC_PCR_Allocate), - .authhandle = cpu_to_be32(TPM2_RH_PLATFORM), - .authblocksize = cpu_to_be32(sizeof(trpa.authblock)), - .authblock = { - .handle = cpu_to_be32(TPM2_RS_PW), - .noncesize = cpu_to_be16(0), - .contsession = TPM2_YES, - .pwdsize = cpu_to_be16(0), - }, - }; - struct tpms_pcr_selection3 { - u16 hashAlg; - u8 sizeOfSelect; - u8 pcrSelect[3]; - } tps[ARRAY_SIZE(trpa.tpms_pcr_selections)]; - int i = 0; - u8 hashalg_flag = TPM2_ALG_SHA1_FLAG; - u8 dontcare, suppt_banks; - - tpm20_get_suppt_pcrbanks(&suppt_banks, &dontcare); - - while (hashalg_flag) { - if ((hashalg_flag & suppt_banks)) { - u16 hashalg = tpm20_hashalg_flag_to_hashalg(hashalg_flag); - - if (hashalg) { - u8 mask = 0; - tps[i].hashAlg = cpu_to_be16(hashalg); - tps[i].sizeOfSelect = 3; - - if (active_banks & hashalg_flag) - mask = 0xff; - - tps[i].pcrSelect[0] = mask; - tps[i].pcrSelect[1] = mask; - tps[i].pcrSelect[2] = mask; - i++; - } - } - hashalg_flag <<= 1; - } - - trpa.count = cpu_to_be32(i); - memcpy(trpa.tpms_pcr_selections, tps, i * sizeof(tps[0])); - trpa.hdr.totlen = cpu_to_be32(offsetof(struct tpm2_req_pcr_allocate, - tpms_pcr_selections) + - i * sizeof(tps[0])); - - struct tpm_rsp_header rsp; - u32 resp_length = sizeof(rsp); - - int ret = tpmhw_transmit(0, &trpa.hdr, &rsp, &resp_length, - TPM_DURATION_TYPE_SHORT); - ret = ret ? -1 : be32_to_cpu(rsp.errcode); - - return ret; -} - -static int tpm20_activate_pcrbanks(u32 active_banks) -{ - int ret = tpm20_set_pcrbanks(active_banks); - if (!ret) - ret = tpm_simple_cmd(0, TPM2_CC_Shutdown, - 2, TPM2_SU_CLEAR, TPM_DURATION_TYPE_SHORT); - if (!ret) - reset(); - return ret; -} - -static int -tpm12_get_capability(u32 cap, u32 subcap, struct tpm_rsp_header *rsp, u32 rsize) -{ - struct tpm_req_getcap trgc = { - .hdr.tag = cpu_to_be16(TPM_TAG_RQU_CMD), - .hdr.totlen = cpu_to_be32(sizeof(trgc)), - .hdr.ordinal = cpu_to_be32(TPM_ORD_GetCapability), - .capArea = cpu_to_be32(cap), - .subCapSize = cpu_to_be32(sizeof(trgc.subCap)), - .subCap = cpu_to_be32(subcap) - }; - u32 resp_size = rsize; - int ret = tpmhw_transmit(0, &trgc.hdr, rsp, &resp_size, - TPM_DURATION_TYPE_SHORT); - ret = (ret || resp_size != rsize) ? -1 : be32_to_cpu(rsp->errcode); - dprintf(DEBUG_tcg, "TCGBIOS: Return code from TPM_GetCapability(%d, %d)" - " = %x\n", cap, subcap, ret); - return ret; -} - -static int -tpm12_read_permanent_flags(char *buf, int buf_len) -{ - memset(buf, 0, buf_len); - - struct tpm_res_getcap_perm_flags pf; - int ret = tpm12_get_capability(TPM_CAP_FLAG, TPM_CAP_FLAG_PERMANENT - , &pf.hdr, sizeof(pf)); - if (ret) - return -1; - - memcpy(buf, &pf.perm_flags, buf_len); - - return 0; -} - -static int -tpm12_determine_timeouts(void) -{ - struct tpm_res_getcap_timeouts timeouts; - int ret = tpm12_get_capability(TPM_CAP_PROPERTY, TPM_CAP_PROP_TIS_TIMEOUT - , &timeouts.hdr, sizeof(timeouts)); - if (ret) - return ret; - - struct tpm_res_getcap_durations durations; - ret = tpm12_get_capability(TPM_CAP_PROPERTY, TPM_CAP_PROP_DURATION - , &durations.hdr, sizeof(durations)); - if (ret) - return ret; - - int i; - for (i = 0; i < 3; i++) - durations.durations[i] = be32_to_cpu(durations.durations[i]); - - for (i = 0; i < 4; i++) - timeouts.timeouts[i] = be32_to_cpu(timeouts.timeouts[i]); - - dprintf(DEBUG_tcg, "TCGBIOS: timeouts: %u %u %u %u\n", - timeouts.timeouts[0], - timeouts.timeouts[1], - timeouts.timeouts[2], - timeouts.timeouts[3]); - - dprintf(DEBUG_tcg, "TCGBIOS: durations: %u %u %u\n", - durations.durations[0], - durations.durations[1], - durations.durations[2]); - - tpmhw_set_timeouts(timeouts.timeouts, durations.durations); - - return 0; -} - -static void -tpm20_set_timeouts(void) -{ - u32 durations[3] = { - TPM2_DEFAULT_DURATION_SHORT, - TPM2_DEFAULT_DURATION_MEDIUM, - TPM2_DEFAULT_DURATION_LONG, - }; - u32 timeouts[4] = { - TIS2_DEFAULT_TIMEOUT_A, - TIS2_DEFAULT_TIMEOUT_B, - TIS2_DEFAULT_TIMEOUT_C, - TIS2_DEFAULT_TIMEOUT_D, - }; - - tpmhw_set_timeouts(timeouts, durations); -} - -static int -tpm12_extend(struct tpm_log_entry *le, int digest_len) -{ - struct tpm_req_extend tre = { - .hdr.tag = cpu_to_be16(TPM_TAG_RQU_CMD), - .hdr.totlen = cpu_to_be32(sizeof(tre)), - .hdr.ordinal = cpu_to_be32(TPM_ORD_Extend), - .pcrindex = cpu_to_be32(le->hdr.pcrindex), - }; - memcpy(tre.digest, le->hdr.digest, sizeof(tre.digest)); - - struct tpm_rsp_extend rsp; - u32 resp_length = sizeof(rsp); - int ret = tpmhw_transmit(0, &tre.hdr, &rsp, &resp_length, - TPM_DURATION_TYPE_SHORT); - if (ret || resp_length != sizeof(rsp) || rsp.hdr.errcode) - return -1; - - return 0; -} - -static int tpm20_extend(struct tpm_log_entry *le, int digest_len) -{ - struct tpm2_req_extend tmp_tre = { - .hdr.tag = cpu_to_be16(TPM2_ST_SESSIONS), - .hdr.totlen = cpu_to_be32(0), - .hdr.ordinal = cpu_to_be32(TPM2_CC_PCR_Extend), - .pcrindex = cpu_to_be32(le->hdr.pcrindex), - .authblocksize = cpu_to_be32(sizeof(tmp_tre.authblock)), - .authblock = { - .handle = cpu_to_be32(TPM2_RS_PW), - .noncesize = cpu_to_be16(0), - .contsession = TPM2_YES, - .pwdsize = cpu_to_be16(0), - }, - }; - u8 buffer[sizeof(tmp_tre) + sizeof(le->pad)]; - struct tpm2_req_extend *tre = (struct tpm2_req_extend *)buffer; - - memcpy(tre, &tmp_tre, sizeof(tmp_tre)); - memcpy(&tre->digest[0], le->hdr.digest, digest_len); - - tre->hdr.totlen = cpu_to_be32(sizeof(tmp_tre) + digest_len); - - struct tpm_rsp_header rsp; - u32 resp_length = sizeof(rsp); - int ret = tpmhw_transmit(0, &tre->hdr, &rsp, &resp_length, - TPM_DURATION_TYPE_SHORT); - if (ret || resp_length != sizeof(rsp) || rsp.errcode) - return -1; - - return 0; -} - -static int -tpm_extend(struct tpm_log_entry *le, int digest_len) -{ - switch (TPM_version) { - case TPM_VERSION_1_2: - return tpm12_extend(le, digest_len); - case TPM_VERSION_2: - return tpm20_extend(le, digest_len); - } - return -1; -} - -static int -tpm20_stirrandom(void) -{ - struct tpm2_req_stirrandom stir = { - .hdr.tag = cpu_to_be16(TPM2_ST_NO_SESSIONS), - .hdr.totlen = cpu_to_be32(sizeof(stir)), - .hdr.ordinal = cpu_to_be32(TPM2_CC_StirRandom), - .size = cpu_to_be16(sizeof(stir.stir)), - .stir = rdtscll(), - }; - /* set more bits to stir with */ - stir.stir += swab64(rdtscll()); - - struct tpm_rsp_header rsp; - u32 resp_length = sizeof(rsp); - int ret = tpmhw_transmit(0, &stir.hdr, &rsp, &resp_length, - TPM_DURATION_TYPE_SHORT); - if (ret || resp_length != sizeof(rsp) || rsp.errcode) - ret = -1; - - dprintf(DEBUG_tcg, "TCGBIOS: Return value from sending TPM2_CC_StirRandom = 0x%08x\n", - ret); - - return ret; -} - -static int -tpm20_getrandom(u8 *buf, u16 buf_len) -{ - struct tpm2_res_getrandom rsp; - - if (buf_len > sizeof(rsp.rnd.buffer)) - return -1; - - struct tpm2_req_getrandom trgr = { - .hdr.tag = cpu_to_be16(TPM2_ST_NO_SESSIONS), - .hdr.totlen = cpu_to_be32(sizeof(trgr)), - .hdr.ordinal = cpu_to_be32(TPM2_CC_GetRandom), - .bytesRequested = cpu_to_be16(buf_len), - }; - u32 resp_length = sizeof(rsp); - - int ret = tpmhw_transmit(0, &trgr.hdr, &rsp, &resp_length, - TPM_DURATION_TYPE_MEDIUM); - if (ret || resp_length != sizeof(rsp) || rsp.hdr.errcode) - ret = -1; - else - memcpy(buf, rsp.rnd.buffer, buf_len); - - dprintf(DEBUG_tcg, "TCGBIOS: Return value from sending TPM2_CC_GetRandom = 0x%08x\n", - ret); - - return ret; -} - -static int -tpm20_hierarchycontrol(u32 hierarchy, u8 state) -{ - /* we will try to deactivate the TPM now - ignoring all errors */ - struct tpm2_req_hierarchycontrol trh = { - .hdr.tag = cpu_to_be16(TPM2_ST_SESSIONS), - .hdr.totlen = cpu_to_be32(sizeof(trh)), - .hdr.ordinal = cpu_to_be32(TPM2_CC_HierarchyControl), - .authhandle = cpu_to_be32(TPM2_RH_PLATFORM), - .authblocksize = cpu_to_be32(sizeof(trh.authblock)), - .authblock = { - .handle = cpu_to_be32(TPM2_RS_PW), - .noncesize = cpu_to_be16(0), - .contsession = TPM2_YES, - .pwdsize = cpu_to_be16(0), - }, - .enable = cpu_to_be32(hierarchy), - .state = state, - }; - struct tpm_rsp_header rsp; - u32 resp_length = sizeof(rsp); - int ret = tpmhw_transmit(0, &trh.hdr, &rsp, &resp_length, - TPM_DURATION_TYPE_MEDIUM); - if (ret || resp_length != sizeof(rsp) || rsp.errcode) - ret = -1; - - dprintf(DEBUG_tcg, "TCGBIOS: Return value from sending TPM2_CC_HierarchyControl = 0x%08x\n", - ret); - - return ret; -} - -static int -tpm20_hierarchychangeauth(u8 auth[20]) -{ - struct tpm2_req_hierarchychangeauth trhca = { - .hdr.tag = cpu_to_be16(TPM2_ST_SESSIONS), - .hdr.totlen = cpu_to_be32(sizeof(trhca)), - .hdr.ordinal = cpu_to_be32(TPM2_CC_HierarchyChangeAuth), - .authhandle = cpu_to_be32(TPM2_RH_PLATFORM), - .authblocksize = cpu_to_be32(sizeof(trhca.authblock)), - .authblock = { - .handle = cpu_to_be32(TPM2_RS_PW), - .noncesize = cpu_to_be16(0), - .contsession = TPM2_YES, - .pwdsize = cpu_to_be16(0), - }, - .newAuth = { - .size = cpu_to_be16(sizeof(trhca.newAuth.buffer)), - }, - }; - memcpy(trhca.newAuth.buffer, auth, sizeof(trhca.newAuth.buffer)); - - struct tpm_rsp_header rsp; - u32 resp_length = sizeof(rsp); - int ret = tpmhw_transmit(0, &trhca.hdr, &rsp, &resp_length, - TPM_DURATION_TYPE_MEDIUM); - if (ret || resp_length != sizeof(rsp) || rsp.errcode) - ret = -1; - - dprintf(DEBUG_tcg, "TCGBIOS: Return value from sending TPM2_CC_HierarchyChangeAuth = 0x%08x\n", - ret); - - return ret; -} - - -/**************************************************************** - * Setup and Measurements - ****************************************************************/ - -static int TPM_has_physical_presence; -u8 TPM_working VARLOW; - -static int -tpm_is_working(void) -{ - return CONFIG_TCGBIOS && TPM_working; -} - -static void -tpm_set_failure(void) -{ - switch (TPM_version) { - case TPM_VERSION_1_2: - /* - * We will try to deactivate the TPM now - ignoring all errors - * Physical presence is asserted. - */ - - tpm_simple_cmd(0, TPM_ORD_SetTempDeactivated, - 0, 0, TPM_DURATION_TYPE_SHORT); - break; - case TPM_VERSION_2: - tpm20_hierarchycontrol(TPM2_RH_ENDORSEMENT, TPM2_NO); - tpm20_hierarchycontrol(TPM2_RH_OWNER, TPM2_NO); - tpm20_hierarchycontrol(TPM2_RH_PLATFORM, TPM2_NO); - break; - } - - TPM_working = 0; -} - -/* - * Add a measurement to the log; the data at data_seg:data/length are - * appended to the TCG_PCClientPCREventStruct - * - * Input parameters: - * pcrindex : which PCR to extend - * event_type : type of event; specs section on 'Event Types' - * event : pointer to info (e.g., string) to be added to log as-is - * event_length: length of the event - * hashdata : pointer to the data to be hashed - * hashdata_length: length of the data to be hashed - */ -static void -tpm_add_measurement_to_log(u32 pcrindex, u32 event_type, - const char *event, u32 event_length, - const u8 *hashdata, u32 hashdata_length) -{ - if (!tpm_is_working()) - return; - - struct tpm_log_entry le = { - .hdr.pcrindex = pcrindex, - .hdr.eventtype = event_type, - }; - int digest_len = tpm_build_digest(&le, hashdata, hashdata_length, 1); - if (digest_len < 0) - return; - int ret = tpm_extend(&le, digest_len); - if (ret) { - tpm_set_failure(); - return; - } - tpm_build_digest(&le, hashdata, hashdata_length, 0); - tpm_log_event(&le.hdr, digest_len, event, event_length); -} - -// Add an EV_ACTION measurement to the list of measurements -static void -tpm_add_action(u32 pcrIndex, const char *string) -{ - u32 len = strlen(string); - tpm_add_measurement_to_log(pcrIndex, EV_ACTION, - string, len, (u8 *)string, len); -} - -/* - * Add event separators for PCRs 0 to 7; specs on 'Measuring Boot Events' - */ -static void -tpm_add_event_separators(void) -{ - static const u8 evt_separator[] = {0xff,0xff,0xff,0xff}; - u32 pcrIndex; - for (pcrIndex = 0; pcrIndex <= 7; pcrIndex++) - tpm_add_measurement_to_log(pcrIndex, EV_SEPARATOR, - (const char *)evt_separator, - sizeof(evt_separator), - evt_separator, - sizeof(evt_separator)); -} - -static void -tpm_smbios_measure(void) -{ - struct pcctes pcctes = { - .eventid = 1, - .eventdatasize = SHA1_BUFSIZE, - }; - struct smbios_entry_point *sep = SMBiosAddr; - - dprintf(DEBUG_tcg, "TCGBIOS: SMBIOS at %p\n", sep); - - if (!sep) - return; - - sha1((const u8 *)sep->structure_table_address, - sep->structure_table_length, pcctes.digest); - tpm_add_measurement_to_log(1, - EV_EVENT_TAG, - (const char *)&pcctes, sizeof(pcctes), - (u8 *)&pcctes, sizeof(pcctes)); -} - -static int -tpm12_assert_physical_presence(void) -{ - int ret = tpm_simple_cmd(0, TPM_ORD_PhysicalPresence, - 2, TPM_PP_PRESENT, TPM_DURATION_TYPE_SHORT); - if (!ret) - return 0; - - struct tpm_permanent_flags pf; - ret = tpm12_read_permanent_flags((char *)&pf, sizeof(pf)); - if (ret) - return -1; - - /* check if hardware physical presence is supported */ - if (pf.flags[PERM_FLAG_IDX_PHYSICAL_PRESENCE_HW_ENABLE]) { - /* HW phys. presence may not be asserted... */ - return 0; - } - - if (!pf.flags[PERM_FLAG_IDX_PHYSICAL_PRESENCE_LIFETIME_LOCK] - && !pf.flags[PERM_FLAG_IDX_PHYSICAL_PRESENCE_CMD_ENABLE]) { - tpm_simple_cmd(0, TPM_ORD_PhysicalPresence, - 2, TPM_PP_CMD_ENABLE, TPM_DURATION_TYPE_SHORT); - - return tpm_simple_cmd(0, TPM_ORD_PhysicalPresence, - 2, TPM_PP_PRESENT, TPM_DURATION_TYPE_SHORT); - } - return -1; -} - -static int -tpm12_startup(void) -{ - dprintf(DEBUG_tcg, "TCGBIOS: Starting with TPM_Startup(ST_CLEAR)\n"); - int ret = tpm_simple_cmd(0, TPM_ORD_Startup, - 2, TPM_ST_CLEAR, TPM_DURATION_TYPE_SHORT); - if (CONFIG_COREBOOT && ret == TPM_INVALID_POSTINIT) - /* with other firmware on the system the TPM may already have been - * initialized - */ - ret = 0; - if (ret) - goto err_exit; - - /* assertion of physical presence is only possible after startup */ - ret = tpm12_assert_physical_presence(); - if (!ret) - TPM_has_physical_presence = 1; - - ret = tpm12_determine_timeouts(); - if (ret) - goto err_exit; - - ret = tpm_simple_cmd(0, TPM_ORD_SelfTestFull, - 0, 0, TPM_DURATION_TYPE_LONG); - if (ret) - goto err_exit; - - ret = tpm_simple_cmd(3, TSC_ORD_ResetEstablishmentBit, - 0, 0, TPM_DURATION_TYPE_SHORT); - if (ret && ret != TPM_BAD_LOCALITY) - goto err_exit; - - return 0; - -err_exit: - dprintf(DEBUG_tcg, "TCGBIOS: TPM malfunctioning (line %d).\n", __LINE__); - - tpm_set_failure(); - return -1; -} - -static int -tpm20_startup(void) -{ - tpm20_set_timeouts(); - - int ret = tpm_simple_cmd(0, TPM2_CC_Startup, - 2, TPM2_SU_CLEAR, TPM_DURATION_TYPE_SHORT); - - dprintf(DEBUG_tcg, "TCGBIOS: Return value from sending TPM2_CC_Startup(SU_CLEAR) = 0x%08x\n", - ret); - - if (CONFIG_COREBOOT && ret == TPM2_RC_INITIALIZE) - /* with other firmware on the system the TPM may already have been - * initialized - */ - ret = 0; - - if (ret) - goto err_exit; - - ret = tpm_simple_cmd(0, TPM2_CC_SelfTest, - 1, TPM2_YES, TPM_DURATION_TYPE_LONG); - - dprintf(DEBUG_tcg, "TCGBIOS: Return value from sending TPM2_CC_SelfTest = 0x%08x\n", - ret); - - if (ret) - goto err_exit; - - ret = tpm20_get_pcrbanks(); - if (ret) - goto err_exit; - - ret = tpm20_write_EfiSpecIdEventStruct(); - if (ret) - goto err_exit; - - return 0; - -err_exit: - dprintf(DEBUG_tcg, "TCGBIOS: TPM malfunctioning (line %d).\n", __LINE__); - - tpm_set_failure(); - return -1; -} - -static int -tpm_startup(void) -{ - switch (TPM_version) { - case TPM_VERSION_1_2: - return tpm12_startup(); - case TPM_VERSION_2: - return tpm20_startup(); - } - return -1; -} - -void -tpm_setup(void) -{ - if (!CONFIG_TCGBIOS) - return; - - int ret = tpm_tpm2_probe(); - if (ret) { - ret = tpm_tcpa_probe(); - if (ret) - return; - } - - TPM_version = tpmhw_probe(); - if (TPM_version == TPM_VERSION_NONE) - return; - - dprintf(DEBUG_tcg, - "TCGBIOS: Detected a TPM %s.\n", - (TPM_version == TPM_VERSION_1_2) ? "1.2" : "2"); - - TPM_working = 1; - - if (runningOnXen()) - return; - - ret = tpm_startup(); - if (ret) - return; - - tpm_smbios_measure(); - tpm_add_action(2, "Start Option ROM Scan"); -} - -static void -tpm20_prepboot(void) -{ - int ret = tpm20_stirrandom(); - if (ret) - goto err_exit; - - u8 auth[20]; - ret = tpm20_getrandom(&auth[0], sizeof(auth)); - if (ret) - goto err_exit; - - ret = tpm20_hierarchychangeauth(auth); - if (ret) - goto err_exit; - - return; - -err_exit: - dprintf(DEBUG_tcg, "TCGBIOS: TPM malfunctioning (line %d).\n", __LINE__); - - tpm_set_failure(); -} - -void -tpm_prepboot(void) -{ - if (!CONFIG_TCGBIOS) - return; - - switch (TPM_version) { - case TPM_VERSION_1_2: - if (TPM_has_physical_presence) - tpm_simple_cmd(0, TPM_ORD_PhysicalPresence, - 2, TPM_PP_NOT_PRESENT_LOCK, TPM_DURATION_TYPE_SHORT); - break; - case TPM_VERSION_2: - tpm20_prepboot(); - break; - } - - tpm_add_action(4, "Calling INT 19h"); - tpm_add_event_separators(); -} - -/* - * Add measurement to the log about an option rom - */ -void -tpm_option_rom(const void *addr, u32 len) -{ - if (!tpm_is_working()) - return; - - struct pcctes_romex pcctes = { - .eventid = 7, - .eventdatasize = sizeof(u16) + sizeof(u16) + SHA1_BUFSIZE, - }; - sha1((const u8 *)addr, len, pcctes.digest); - tpm_add_measurement_to_log(2, - EV_EVENT_TAG, - (const char *)&pcctes, sizeof(pcctes), - (u8 *)&pcctes, sizeof(pcctes)); -} - -void -tpm_add_bcv(u32 bootdrv, const u8 *addr, u32 length) -{ - if (!tpm_is_working()) - return; - - if (length < 0x200) - return; - - const char *string = "Booting BCV device 00h (Floppy)"; - if (bootdrv == 0x80) - string = "Booting BCV device 80h (HDD)"; - tpm_add_action(4, string); - - /* specs: see section 'Hard Disk Device or Hard Disk-Like Devices' */ - /* equivalent to: dd if=/dev/hda ibs=1 count=440 | sha1sum */ - string = "MBR"; - tpm_add_measurement_to_log(4, EV_IPL, - string, strlen(string), - addr, 0x1b8); - - /* equivalent to: dd if=/dev/hda ibs=1 count=72 skip=440 | sha1sum */ - string = "MBR PARTITION_TABLE"; - tpm_add_measurement_to_log(5, EV_IPL_PARTITION_DATA, - string, strlen(string), - addr + 0x1b8, 0x48); -} - -void -tpm_add_cdrom(u32 bootdrv, const u8 *addr, u32 length) -{ - if (!tpm_is_working()) - return; - - tpm_add_action(4, "Booting from CD ROM device"); - - /* specs: see section 'El Torito' */ - const char *string = "EL TORITO IPL"; - tpm_add_measurement_to_log(4, EV_IPL, - string, strlen(string), - addr, length); -} - -void -tpm_add_cdrom_catalog(const u8 *addr, u32 length) -{ - if (!tpm_is_working()) - return; - - tpm_add_action(4, "Booting from CD ROM device"); - - /* specs: see section 'El Torito' */ - const char *string = "BOOT CATALOG"; - tpm_add_measurement_to_log(5, EV_IPL_PARTITION_DATA, - string, strlen(string), - addr, length); -} - -void -tpm_s3_resume(void) -{ - if (!tpm_is_working()) - return; - - dprintf(DEBUG_tcg, "TCGBIOS: Resuming with TPM_Startup(ST_STATE)\n"); - - int ret = -1; - - switch (TPM_version) { - case TPM_VERSION_1_2: - ret = tpm_simple_cmd(0, TPM_ORD_Startup, - 2, TPM_ST_STATE, TPM_DURATION_TYPE_SHORT); - break; - case TPM_VERSION_2: - ret = tpm_simple_cmd(0, TPM2_CC_Startup, - 2, TPM2_SU_STATE, TPM_DURATION_TYPE_SHORT); - - dprintf(DEBUG_tcg, "TCGBIOS: Return value from sending TPM2_CC_Startup(SU_STATE) = 0x%08x\n", - ret); - - if (ret) - goto err_exit; - - - ret = tpm_simple_cmd(0, TPM2_CC_SelfTest, - 1, TPM2_YES, TPM_DURATION_TYPE_LONG); - - dprintf(DEBUG_tcg, "TCGBIOS: Return value from sending TPM2_CC_SelfTest() = 0x%08x\n", - ret); - - break; - } - - if (ret) - goto err_exit; - - return; - -err_exit: - dprintf(DEBUG_tcg, "TCGBIOS: TPM malfunctioning (line %d).\n", __LINE__); - - tpm_set_failure(); -} - - -/**************************************************************** - * BIOS interface - ****************************************************************/ - -u8 TPM_interface_shutdown VARLOW; - -static inline void *input_buf32(struct bregs *regs) -{ - return MAKE_FLATPTR(regs->es, regs->di); -} - -static inline void *output_buf32(struct bregs *regs) -{ - return MAKE_FLATPTR(regs->ds, regs->si); -} - -static u32 -hash_log_extend(struct pcpes *pcpes, const void *hashdata, u32 hashdata_length - , void *event, int extend) -{ - if (pcpes->pcrindex >= 24) - return TCG_INVALID_INPUT_PARA; - if (hashdata) - sha1(hashdata, hashdata_length, pcpes->digest); - - struct tpm_log_entry le = { - .hdr.pcrindex = pcpes->pcrindex, - .hdr.eventtype = pcpes->eventtype, - }; - int digest_len = tpm12_build_digest_direct(&le, pcpes->digest); - if (digest_len < 0) - return TCG_GENERAL_ERROR; - if (extend) { - int ret = tpm_extend(&le, digest_len); - if (ret) - return TCG_TCG_COMMAND_ERROR; - } - tpm12_build_digest_direct(&le, pcpes->digest); - int ret = tpm_log_event(&le.hdr, digest_len - , pcpes->event, pcpes->eventdatasize); - if (ret) - return TCG_PC_LOGOVERFLOW; - return 0; -} - -static u32 -hash_log_extend_event_int(const struct hleei_short *hleei_s, - struct hleeo *hleeo) -{ - u32 rc = 0; - struct hleei_long *hleei_l = (struct hleei_long *)hleei_s; - const void *logdataptr; - u32 logdatalen; - struct pcpes *pcpes; - u32 pcrindex; - - /* short or long version? */ - switch (hleei_s->ipblength) { - case sizeof(struct hleei_short): - /* short */ - logdataptr = hleei_s->logdataptr; - logdatalen = hleei_s->logdatalen; - pcrindex = hleei_s->pcrindex; - break; - - case sizeof(struct hleei_long): - /* long */ - logdataptr = hleei_l->logdataptr; - logdatalen = hleei_l->logdatalen; - pcrindex = hleei_l->pcrindex; - break; - - default: - /* bad input block */ - rc = TCG_INVALID_INPUT_PARA; - goto err_exit; - } - - pcpes = (struct pcpes *)logdataptr; - - if (pcpes->pcrindex != pcrindex - || logdatalen != sizeof(*pcpes) + pcpes->eventdatasize) { - rc = TCG_INVALID_INPUT_PARA; - goto err_exit; - } - rc = hash_log_extend(pcpes, hleei_s->hashdataptr, hleei_s->hashdatalen - , pcpes->event, 1); - if (rc) - goto err_exit; - - hleeo->opblength = sizeof(struct hleeo); - hleeo->reserved = 0; - hleeo->eventnumber = tpm_state.entry_count; - memcpy(hleeo->digest, pcpes->digest, sizeof(hleeo->digest)); - -err_exit: - if (rc != 0) { - hleeo->opblength = 4; - hleeo->reserved = 0; - } - - return rc; -} - -static u32 -pass_through_to_tpm_int(struct pttti *pttti, struct pttto *pttto) -{ - u32 rc = 0; - struct tpm_req_header *trh = (void*)pttti->tpmopin; - - if (pttti->ipblength < sizeof(struct pttti) + sizeof(*trh) - || pttti->ipblength != sizeof(struct pttti) + be32_to_cpu(trh->totlen) - || pttti->opblength < sizeof(struct pttto)) { - rc = TCG_INVALID_INPUT_PARA; - goto err_exit; - } - - u16 tag = be16_to_cpu(trh->tag); - - switch (TPM_version) { - case TPM_VERSION_1_2: - if (tag != TPM_TAG_RQU_CMD && tag != TPM_TAG_RQU_AUTH1_CMD - && tag != TPM_TAG_RQU_AUTH2_CMD) { - rc = TCG_INVALID_INPUT_PARA; - goto err_exit; - } - break; - case TPM_VERSION_2: - if (tag != TPM2_ST_NO_SESSIONS && tag != TPM2_ST_SESSIONS) { - rc = TCG_INVALID_INPUT_PARA; - goto err_exit; - } - } - - u32 resbuflen = pttti->opblength - offsetof(struct pttto, tpmopout); - int ret = tpmhw_transmit(0, trh, pttto->tpmopout, &resbuflen, - TPM_DURATION_TYPE_LONG /* worst case */); - if (ret) { - rc = TCG_FATAL_COM_ERROR; - goto err_exit; - } - - pttto->opblength = offsetof(struct pttto, tpmopout) + resbuflen; - pttto->reserved = 0; - -err_exit: - if (rc != 0) { - pttto->opblength = 4; - pttto->reserved = 0; - } - - return rc; -} - -static u32 -shutdown_preboot_interface(void) -{ - TPM_interface_shutdown = 1; - return 0; -} - -static u32 -hash_log_event_int(const struct hlei *hlei, struct hleo *hleo) -{ - u32 rc = 0; - u16 size; - struct pcpes *pcpes; - - size = hlei->ipblength; - if (size != sizeof(*hlei)) { - rc = TCG_INVALID_INPUT_PARA; - goto err_exit; - } - - pcpes = (struct pcpes *)hlei->logdataptr; - - if (pcpes->pcrindex != hlei->pcrindex - || pcpes->eventtype != hlei->logeventtype - || hlei->logdatalen != sizeof(*pcpes) + pcpes->eventdatasize) { - rc = TCG_INVALID_INPUT_PARA; - goto err_exit; - } - rc = hash_log_extend(pcpes, hlei->hashdataptr, hlei->hashdatalen - , pcpes->event, 0); - if (rc) - goto err_exit; - - /* updating the log was fine */ - hleo->opblength = sizeof(struct hleo); - hleo->reserved = 0; - hleo->eventnumber = tpm_state.entry_count; - -err_exit: - if (rc != 0) { - hleo->opblength = 2; - hleo->reserved = 0; - } - - return rc; -} - -static u32 -hash_all_int(const struct hai *hai, u8 *hash) -{ - if (hai->ipblength != sizeof(struct hai) || - hai->hashdataptr == 0 || - hai->hashdatalen == 0 || - hai->algorithmid != TPM_ALG_SHA) - return TCG_INVALID_INPUT_PARA; - - sha1((const u8 *)hai->hashdataptr, hai->hashdatalen, hash); - return 0; -} - -static u32 -tss_int(struct ti *ti, struct to *to) -{ - to->opblength = sizeof(struct to); - to->reserved = 0; - - return TCG_PC_UNSUPPORTED; -} - -static u32 -compact_hash_log_extend_event_int(u8 *buffer, - u32 info, - u32 length, - u32 pcrindex, - u32 *edx_ptr) -{ - struct pcpes pcpes = { - .pcrindex = pcrindex, - .eventtype = EV_COMPACT_HASH, - .eventdatasize = sizeof(info), - }; - u32 rc = hash_log_extend(&pcpes, buffer, length, &info, 1); - if (rc) - return rc; - - *edx_ptr = tpm_state.entry_count; - return 0; -} - -void VISIBLE32FLAT -tpm_interrupt_handler32(struct bregs *regs) -{ - if (!CONFIG_TCGBIOS) - return; - - set_cf(regs, 0); - - if (TPM_interface_shutdown && regs->al) { - regs->eax = TCG_INTERFACE_SHUTDOWN; - return; - } - - switch ((enum irq_ids)regs->al) { - case TCG_StatusCheck: - if (!tpmhw_is_present()) { - /* no TPM available */ - regs->eax = TCG_PC_TPM_NOT_PRESENT; - } else { - regs->eax = 0; - regs->ebx = TCG_MAGIC; - regs->ch = TCG_VERSION_MAJOR; - regs->cl = TCG_VERSION_MINOR; - regs->edx = 0x0; - regs->esi = (u32)tpm_state.log_area_start_address; - regs->edi = (u32)tpm_state.log_area_last_entry; - } - break; - - case TCG_HashLogExtendEvent: - regs->eax = - hash_log_extend_event_int( - (struct hleei_short *)input_buf32(regs), - (struct hleeo *)output_buf32(regs)); - break; - - case TCG_PassThroughToTPM: - regs->eax = - pass_through_to_tpm_int((struct pttti *)input_buf32(regs), - (struct pttto *)output_buf32(regs)); - break; - - case TCG_ShutdownPreBootInterface: - regs->eax = shutdown_preboot_interface(); - break; - - case TCG_HashLogEvent: - regs->eax = hash_log_event_int((struct hlei*)input_buf32(regs), - (struct hleo*)output_buf32(regs)); - break; - - case TCG_HashAll: - regs->eax = - hash_all_int((struct hai*)input_buf32(regs), - (u8 *)output_buf32(regs)); - break; - - case TCG_TSS: - regs->eax = tss_int((struct ti*)input_buf32(regs), - (struct to*)output_buf32(regs)); - break; - - case TCG_CompactHashLogExtendEvent: - regs->eax = - compact_hash_log_extend_event_int((u8 *)input_buf32(regs), - regs->esi, - regs->ecx, - regs->edx, - ®s->edx); - break; - - default: - set_cf(regs, 1); - } - - return; -} - - -/**************************************************************** - * TPM Configuration Menu - ****************************************************************/ - -typedef u8 tpm_ppi_code; - -static int -tpm12_read_has_owner(int *has_owner) -{ - struct tpm_res_getcap_ownerauth oauth; - int ret = tpm12_get_capability(TPM_CAP_PROPERTY, TPM_CAP_PROP_OWNER - , &oauth.hdr, sizeof(oauth)); - if (ret) - return -1; - - *has_owner = oauth.flag; - - return 0; -} - -static int -tpm12_enable_tpm(int enable, int verbose) -{ - struct tpm_permanent_flags pf; - int ret = tpm12_read_permanent_flags((char *)&pf, sizeof(pf)); - if (ret) - return -1; - - if (pf.flags[PERM_FLAG_IDX_DISABLE] && !enable) - return 0; - - ret = tpm_simple_cmd(0, enable ? TPM_ORD_PhysicalEnable - : TPM_ORD_PhysicalDisable, - 0, 0, TPM_DURATION_TYPE_SHORT); - if (ret) { - if (enable) - dprintf(DEBUG_tcg, "TCGBIOS: Enabling the TPM failed.\n"); - else - dprintf(DEBUG_tcg, "TCGBIOS: Disabling the TPM failed.\n"); - } - return ret; -} - -static int -tpm12_activate_tpm(int activate, int allow_reset, int verbose) -{ - struct tpm_permanent_flags pf; - int ret = tpm12_read_permanent_flags((char *)&pf, sizeof(pf)); - if (ret) - return -1; - - if (pf.flags[PERM_FLAG_IDX_DEACTIVATED] && !activate) - return 0; - - if (pf.flags[PERM_FLAG_IDX_DISABLE]) - return 0; - - ret = tpm_simple_cmd(0, TPM_ORD_PhysicalSetDeactivated, - 1, activate ? 0x00 : 0x01, TPM_DURATION_TYPE_SHORT); - if (ret) - return ret; - - if (activate && allow_reset) { - if (verbose) { - printf("Requiring a reboot to activate the TPM.\n"); - - msleep(2000); - } - reset(); - } - - return 0; -} - -static int -tpm12_enable_activate(int allow_reset, int verbose) -{ - int ret = tpm12_enable_tpm(1, verbose); - if (ret) - return ret; - - return tpm12_activate_tpm(1, allow_reset, verbose); -} - -static int -tpm12_force_clear(int enable_activate_before, int enable_activate_after, - int verbose) -{ - int has_owner; - int ret = tpm12_read_has_owner(&has_owner); - if (ret) - return -1; - if (!has_owner) { - if (verbose) - printf("TPM does not have an owner.\n"); - return 0; - } - - if (enable_activate_before) { - ret = tpm12_enable_activate(0, verbose); - if (ret) { - dprintf(DEBUG_tcg, - "TCGBIOS: Enabling/activating the TPM failed.\n"); - return ret; - } - } - - ret = tpm_simple_cmd(0, TPM_ORD_ForceClear, - 0, 0, TPM_DURATION_TYPE_SHORT); - if (ret) - return ret; - - if (!enable_activate_after) { - if (verbose) - printf("Owner successfully cleared.\n" - "You will need to enable/activate the TPM again.\n\n"); - return 0; - } - - return tpm12_enable_activate(1, verbose); -} - -static int -tpm12_set_owner_install(int allow, int verbose) -{ - int has_owner; - int ret = tpm12_read_has_owner(&has_owner); - if (ret) - return -1; - if (has_owner) { - if (verbose) - printf("Must first remove owner.\n"); - return 0; - } - - struct tpm_permanent_flags pf; - ret = tpm12_read_permanent_flags((char *)&pf, sizeof(pf)); - if (ret) - return -1; - - if (pf.flags[PERM_FLAG_IDX_DISABLE]) { - if (verbose) - printf("TPM must first be enable.\n"); - return 0; - } - - ret = tpm_simple_cmd(0, TPM_ORD_SetOwnerInstall, - 1, allow ? 0x01 : 0x00, TPM_DURATION_TYPE_SHORT); - if (ret) - return ret; - - if (verbose) - printf("Installation of owner %s.\n", allow ? "enabled" : "disabled"); - - return 0; -} - -static int -tpm12_process_cfg(tpm_ppi_code msgCode, int verbose) -{ - int ret = 0; - - switch (msgCode) { - case TPM_PPI_OP_NOOP: /* no-op */ - break; - - case TPM_PPI_OP_ENABLE: - ret = tpm12_enable_tpm(1, verbose); - break; - - case TPM_PPI_OP_DISABLE: - ret = tpm12_enable_tpm(0, verbose); - break; - - case TPM_PPI_OP_ACTIVATE: - ret = tpm12_activate_tpm(1, 1, verbose); - break; - - case TPM_PPI_OP_DEACTIVATE: - ret = tpm12_activate_tpm(0, 1, verbose); - break; - - case TPM_PPI_OP_CLEAR: - ret = tpm12_force_clear(1, 0, verbose); - break; - - case TPM_PPI_OP_SET_OWNERINSTALL_TRUE: - ret = tpm12_set_owner_install(1, verbose); - break; - - case TPM_PPI_OP_SET_OWNERINSTALL_FALSE: - ret = tpm12_set_owner_install(0, verbose); - break; - - default: - break; - } - - if (ret) - printf("Op %d: An error occurred: 0x%x\n", msgCode, ret); - - return ret; -} - -static int -tpm20_clearcontrol(u8 disable, int verbose) -{ - struct tpm2_req_clearcontrol trc = { - .hdr.tag = cpu_to_be16(TPM2_ST_SESSIONS), - .hdr.totlen = cpu_to_be32(sizeof(trc)), - .hdr.ordinal = cpu_to_be32(TPM2_CC_ClearControl), - .authhandle = cpu_to_be32(TPM2_RH_PLATFORM), - .authblocksize = cpu_to_be32(sizeof(trc.authblock)), - .authblock = { - .handle = cpu_to_be32(TPM2_RS_PW), - .noncesize = cpu_to_be16(0), - .contsession = TPM2_YES, - .pwdsize = cpu_to_be16(0), - }, - .disable = disable, - }; - struct tpm_rsp_header rsp; - u32 resp_length = sizeof(rsp); - int ret = tpmhw_transmit(0, &trc.hdr, &rsp, &resp_length, - TPM_DURATION_TYPE_SHORT); - if (ret || resp_length != sizeof(rsp) || rsp.errcode) - ret = -1; - - dprintf(DEBUG_tcg, "TCGBIOS: Return value from sending TPM2_CC_ClearControl = 0x%08x\n", - ret); - - return ret; -} - -static int -tpm20_clear(void) -{ - struct tpm2_req_clear trq = { - .hdr.tag = cpu_to_be16(TPM2_ST_SESSIONS), - .hdr.totlen = cpu_to_be32(sizeof(trq)), - .hdr.ordinal = cpu_to_be32(TPM2_CC_Clear), - .authhandle = cpu_to_be32(TPM2_RH_PLATFORM), - .authblocksize = cpu_to_be32(sizeof(trq.authblock)), - .authblock = { - .handle = cpu_to_be32(TPM2_RS_PW), - .noncesize = cpu_to_be16(0), - .contsession = TPM2_YES, - .pwdsize = cpu_to_be16(0), - }, - }; - struct tpm_rsp_header rsp; - u32 resp_length = sizeof(rsp); - int ret = tpmhw_transmit(0, &trq.hdr, &rsp, &resp_length, - TPM_DURATION_TYPE_MEDIUM); - if (ret || resp_length != sizeof(rsp) || rsp.errcode) - ret = -1; - - dprintf(DEBUG_tcg, "TCGBIOS: Return value from sending TPM2_CC_Clear = 0x%08x\n", - ret); - - return ret; -} - -static int -tpm20_process_cfg(tpm_ppi_code msgCode, int verbose) -{ - int ret = 0; - - switch (msgCode) { - case TPM_PPI_OP_NOOP: /* no-op */ - break; - - case TPM_PPI_OP_CLEAR: - ret = tpm20_clearcontrol(0, verbose); - if (!ret) - ret = tpm20_clear(); - break; - } - - if (ret) - printf("Op %d: An error occurred: 0x%x\n", msgCode, ret); - - return ret; -} - -static int -tpm12_get_tpm_state(void) -{ - int state = 0; - struct tpm_permanent_flags pf; - int has_owner; - - if (tpm12_read_permanent_flags((char *)&pf, sizeof(pf)) || - tpm12_read_has_owner(&has_owner)) - return ~0; - - if (!pf.flags[PERM_FLAG_IDX_DISABLE]) - state |= TPM_STATE_ENABLED; - - if (!pf.flags[PERM_FLAG_IDX_DEACTIVATED]) - state |= TPM_STATE_ACTIVE; - - if (has_owner) { - state |= TPM_STATE_OWNED; - } else { - if (pf.flags[PERM_FLAG_IDX_OWNERSHIP]) - state |= TPM_STATE_OWNERINSTALL; - } - - return state; -} - -static void -tpm12_show_tpm_menu(int state, int next_scancodes[7]) -{ - int i = 0; - - printf("\nThe current state of the TPM is:\n"); - - if (state & TPM_STATE_ENABLED) - printf(" Enabled"); - else - printf(" Disabled"); - - if (state & TPM_STATE_ACTIVE) - printf(" and active\n"); - else - printf(" and deactivated\n"); - - if (state & TPM_STATE_OWNED) - printf(" Ownership has been taken\n"); - else { - printf(" Ownership has not been taken\n"); - if (state & TPM_STATE_OWNERINSTALL) - printf(" A user can take ownership of the TPM\n"); - else - printf(" Taking ownership of the TPM has been disabled\n"); - } - - if ((state & (TPM_STATE_ENABLED | TPM_STATE_ACTIVE)) != - (TPM_STATE_ENABLED | TPM_STATE_ACTIVE)) { - printf("\nNote: To make use of all functionality, the TPM must be " - "enabled and active.\n"); - } - - printf("\nAvailable options are:\n"); - if (state & TPM_STATE_ENABLED) { - printf(" d. Disable the TPM\n"); - next_scancodes[i++] = 32; - - if (state & TPM_STATE_ACTIVE) { - printf(" v. Deactivate the TPM\n"); - next_scancodes[i++] = 47; - - if (state & TPM_STATE_OWNERINSTALL) { - printf(" p. Prevent installation of an owner\n"); - next_scancodes[i++] = 25; - } else { - printf(" s. Allow installation of an owner\n"); - next_scancodes[i++] = 31; - } - } else { - printf(" a. Activate the TPM\n"); - next_scancodes[i++] = 30; - } - - } else { - printf(" e. Enable the TPM\n"); - next_scancodes[i++] = 18; - } - - if (state & TPM_STATE_OWNED) { - printf(" c. Clear ownership\n"); - next_scancodes[i++] = 46; - } - - next_scancodes[i++] = 0; -} - -static void -tpm12_menu(void) -{ - int scancode, next_scancodes[7]; - tpm_ppi_code msgCode; - int state = 0, i; - int waitkey; - - printf("The Trusted Platform Module (TPM) is a hardware device in " - "this machine.\n" - "It can help verify the integrity of system software.\n\n"); - - for (;;) { - if ((state = tpm12_get_tpm_state()) != ~0) { - tpm12_show_tpm_menu(state, next_scancodes); - } else { - printf("TPM is not working correctly.\n"); - return; - } - - printf("\nIf no change is desired or if this menu was reached by " - "mistake, press ESC to\n" - "reboot the machine.\n"); - - msgCode = TPM_PPI_OP_NOOP; - - waitkey = 1; - - while (waitkey) { - while ((scancode = get_keystroke(1000)) == ~0) - ; - - switch (scancode) { - case 1: - // ESC - reset(); - break; - case 18: /* e. enable */ - msgCode = TPM_PPI_OP_ENABLE; - break; - case 32: /* d. disable */ - msgCode = TPM_PPI_OP_DISABLE; - break; - case 30: /* a. activate */ - msgCode = TPM_PPI_OP_ACTIVATE; - break; - case 47: /* v. deactivate */ - msgCode = TPM_PPI_OP_DEACTIVATE; - break; - case 46: /* c. clear owner */ - msgCode = TPM_PPI_OP_CLEAR; - break; - case 25: /* p. prevent ownerinstall */ - msgCode = TPM_PPI_OP_SET_OWNERINSTALL_FALSE; - break; - case 31: /* s. allow ownerinstall */ - msgCode = TPM_PPI_OP_SET_OWNERINSTALL_TRUE; - break; - default: - continue; - } - - /* - * Using the next_scancodes array, check whether the - * pressed key is currently a valid option. - */ - for (i = 0; i < sizeof(next_scancodes); i++) { - if (next_scancodes[i] == 0) - break; - - if (next_scancodes[i] == scancode) { - tpm12_process_cfg(msgCode, 1); - waitkey = 0; - break; - } - } - } - } -} - -static int -tpm20_menu_change_active_pcrbanks(void) -{ - u8 active_banks, suppt_banks; - - tpm20_get_suppt_pcrbanks(&suppt_banks, &active_banks); - - u8 activate_banks = active_banks; - - while (1) { - u8 hashalg_flag = TPM2_ALG_SHA1_FLAG; - u8 i = 0; - - printf("\nToggle active PCR banks by pressing number key\n\n"); - - while (hashalg_flag) { - u8 flag = hashalg_flag & suppt_banks; - const char *hashname = tpm20_hashalg_flag_to_name(flag); - - i++; - if (hashname) { - printf(" %d: %s", i, hashname); - if (activate_banks & hashalg_flag) - printf(" (enabled)"); - printf("\n"); - } - - hashalg_flag <<= 1; - } - printf("\n" - "ESC: return to previous menu without changes\n"); - if (activate_banks) - printf("A : activate selection\n"); - - u8 flagnum; - int show = 0; - while (!show) { - int scancode = get_keystroke(1000); - - switch (scancode) { - case ~0: - continue; - case 1: /* ESC */ - printf("\n"); - return -1; - case 2 ... 6: /* keys 1 .. 5 */ - flagnum = scancode - 1; - if (flagnum > i) - continue; - if (suppt_banks & (1 << (flagnum - 1))) { - activate_banks ^= 1 << (flagnum - 1); - show = 1; - } - break; - case 30: /* a */ - if (activate_banks) - tpm20_activate_pcrbanks(activate_banks); - } - } - } -} - -static void -tpm20_menu(void) -{ - int scan_code; - tpm_ppi_code msgCode; - - for (;;) { - printf("1. Clear TPM\n"); - printf("2. Change active PCR banks\n"); - - printf("\nIf no change is desired or if this menu was reached by " - "mistake, press ESC to\n" - "reboot the machine.\n"); - - msgCode = TPM_PPI_OP_NOOP; - - while ((scan_code = get_keystroke(1000)) == ~0) - ; - - switch (scan_code) { - case 1: - // ESC - reset(); - break; - case 2: - msgCode = TPM_PPI_OP_CLEAR; - break; - case 3: - tpm20_menu_change_active_pcrbanks(); - continue; - default: - continue; - } - - tpm20_process_cfg(msgCode, 0); - } -} - -void -tpm_menu(void) -{ - if (!CONFIG_TCGBIOS) - return; - - while (get_keystroke(0) >= 0) - ; - wait_threads(); - - switch (TPM_version) { - case TPM_VERSION_1_2: - tpm12_menu(); - break; - case TPM_VERSION_2: - tpm20_menu(); - break; - } -} - -int -tpm_can_show_menu(void) -{ - switch (TPM_version) { - case TPM_VERSION_1_2: - return tpm_is_working() && TPM_has_physical_presence; - case TPM_VERSION_2: - return tpm_is_working(); - } - return 0; -} diff --git a/payloads/external/SeaBIOS/src/tcgbios.h b/payloads/external/SeaBIOS/src/tcgbios.h deleted file mode 100644 index 32fb9417..00000000 --- a/payloads/external/SeaBIOS/src/tcgbios.h +++ /dev/null @@ -1,19 +0,0 @@ -#ifndef TCGBIOS_H -#define TCGBIOS_H - -#include "types.h" - -struct bregs; -void tpm_interrupt_handler32(struct bregs *regs); - -void tpm_setup(void); -void tpm_prepboot(void); -void tpm_s3_resume(void); -void tpm_add_bcv(u32 bootdrv, const u8 *addr, u32 length); -void tpm_add_cdrom(u32 bootdrv, const u8 *addr, u32 length); -void tpm_add_cdrom_catalog(const u8 *addr, u32 length); -void tpm_option_rom(const void *addr, u32 len); -int tpm_can_show_menu(void); -void tpm_menu(void); - -#endif /* TCGBIOS_H */ diff --git a/payloads/external/SeaBIOS/src/types.h b/payloads/external/SeaBIOS/src/types.h deleted file mode 100644 index 19d9f6c1..00000000 --- a/payloads/external/SeaBIOS/src/types.h +++ /dev/null @@ -1,156 +0,0 @@ -// Basic type definitions for X86 cpus. -// -// Copyright (C) 2008-2010 Kevin O'Connor <kevin@koconnor.net> -// -// This file may be distributed under the terms of the GNU LGPLv3 license. -#ifndef __TYPES_H -#define __TYPES_H - -typedef unsigned char u8; -typedef signed char s8; -typedef unsigned short u16; -typedef signed short s16; -typedef unsigned int u32; -typedef signed int s32; -typedef unsigned long long u64; -typedef signed long long s64; -typedef u32 size_t; - -union u64_u32_u { - struct { u32 lo, hi; }; - u64 val; -}; - -// Definition for common 16bit segment/offset pointers. -struct segoff_s { - union { - struct { - u16 offset; - u16 seg; - }; - u32 segoff; - }; -}; - -#ifdef MANUAL_NO_JUMP_TABLE -# define default case 775324556: asm(""); default -#endif - -#ifdef WHOLE_PROGRAM -# define __VISIBLE __attribute__((externally_visible)) -#else -# define __VISIBLE -#endif - -#define UNIQSEC __FILE__ "." __stringify(__LINE__) - -#define __noreturn __attribute__((noreturn)) -extern void __force_link_error__only_in_32bit_flat(void) __noreturn; -extern void __force_link_error__only_in_32bit_segmented(void) __noreturn; -extern void __force_link_error__only_in_16bit(void) __noreturn; - -#define __ASM(code) asm(".section .text.asm." UNIQSEC "\n\t" code) - -#if MODE16 == 1 -// Notes a function as externally visible in the 16bit code chunk. -# define VISIBLE16 __VISIBLE -// Notes a function as externally visible in the 32bit flat code chunk. -# define VISIBLE32FLAT -// Notes a 32bit flat function that will only be called during init. -# define VISIBLE32INIT -// Notes a function as externally visible in the 32bit segmented code chunk. -# define VISIBLE32SEG -// Designate a variable as (only) visible to 16bit code. -# define VAR16 __section(".data16." UNIQSEC) -// Designate a variable as (only) visible to 32bit segmented code. -# define VAR32SEG __section(".discard.var32seg." UNIQSEC) -// Designate a variable as visible and located in the e-segment. -# define VARLOW __section(".discard.varlow." UNIQSEC) __VISIBLE __weak -// Designate a variable as visible and located in the f-segment. -# define VARFSEG __section(".discard.varfseg." UNIQSEC) __VISIBLE __weak -// Designate a variable at a specific address in the f-segment. -# define VARFSEGFIXED(addr) __section(".discard.varfixed." UNIQSEC) __VISIBLE __weak -// Verify a variable is only accessible via 32bit "init" functions -# define VARVERIFY32INIT __section(".discard.varinit." UNIQSEC) -// Designate top-level assembler as 16bit only. -# define ASM16(code) __ASM(code) -// Designate top-level assembler as 32bit flat only. -# define ASM32FLAT(code) -// Compile time check for a given mode. -# define ASSERT16() do { } while (0) -# define ASSERT32SEG() __force_link_error__only_in_32bit_segmented() -# define ASSERT32FLAT() __force_link_error__only_in_32bit_flat() -#elif MODESEGMENT == 1 -# define VISIBLE16 -# define VISIBLE32FLAT -# define VISIBLE32INIT -# define VISIBLE32SEG __VISIBLE -# define VAR16 __section(".discard.var16." UNIQSEC) -# define VAR32SEG __section(".data32seg." UNIQSEC) -# define VARLOW __section(".discard.varlow." UNIQSEC) __VISIBLE __weak -# define VARFSEG __section(".discard.varfseg." UNIQSEC) __VISIBLE __weak -# define VARFSEGFIXED(addr) __section(".discard.varfixed." UNIQSEC) __VISIBLE __weak -# define VARVERIFY32INIT __section(".discard.varinit." UNIQSEC) -# define ASM16(code) -# define ASM32FLAT(code) -# define ASSERT16() __force_link_error__only_in_16bit() -# define ASSERT32SEG() do { } while (0) -# define ASSERT32FLAT() __force_link_error__only_in_32bit_flat() -#else -# define VISIBLE16 -# define VISIBLE32FLAT __section(".text.runtime." UNIQSEC) __VISIBLE -# define VISIBLE32INIT __section(".text.init." UNIQSEC) __VISIBLE -# define VISIBLE32SEG -# define VAR16 __section(".discard.var16." UNIQSEC) -# define VAR32SEG __section(".discard.var32seg." UNIQSEC) -# define VARLOW __section(".data.varlow." UNIQSEC) __VISIBLE __weak -# define VARFSEG __section(".data.varfseg." UNIQSEC) __VISIBLE -# define VARFSEGFIXED(addr) __section(".fixedaddr." __stringify(addr)) __VISIBLE __aligned(1) -# define VARVERIFY32INIT __section(".data.varinit." UNIQSEC) -# define ASM16(code) -# define ASM32FLAT(code) __ASM(code) -# define ASSERT16() __force_link_error__only_in_16bit() -# define ASSERT32SEG() __force_link_error__only_in_32bit_segmented() -# define ASSERT32FLAT() do { } while (0) -#endif - -#define offsetof(TYPE, MEMBER) ((size_t) &((TYPE *)0)->MEMBER) -#define ARRAY_SIZE(a) (sizeof(a) / sizeof(a[0])) -#define FIELD_SIZEOF(t, f) (sizeof(((t*)0)->f)) -#define DIV_ROUND_UP(n,d) (((n) + (d) - 1) / (d)) -#define DIV_ROUND_CLOSEST(x, divisor)({ \ - typeof(divisor) __divisor = divisor; \ - (((x) + ((__divisor) / 2)) / (__divisor)); \ - }) -#define ALIGN(x,a) __ALIGN_MASK(x,(typeof(x))(a)-1) -#define __ALIGN_MASK(x,mask) (((x)+(mask))&~(mask)) -#define ALIGN_DOWN(x,a) ((x) & ~((typeof(x))(a)-1)) -#define container_of(ptr, type, member) ({ \ - const typeof( ((type *)0)->member ) *__mptr = (ptr); \ - (type *)( (char *)__mptr - offsetof(type,member) );}) -#define container_of_or_null(ptr, type, member) ({ \ - const typeof( ((type *)0)->member ) *___mptr = (ptr); \ - ___mptr ? container_of(___mptr, type, member) : NULL; }) - -#define likely(x) __builtin_expect(!!(x), 1) -#define unlikely(x) __builtin_expect(!!(x), 0) - -#define NULL ((void*)0) - -#define __weak __attribute__((weak)) -#define __section(S) __attribute__((section(S))) - -#define PACKED __attribute__((packed)) -#define __aligned(x) __attribute__((aligned(x))) - -#define barrier() __asm__ __volatile__("": : :"memory") - -#define noinline __attribute__((noinline)) -#define __always_inline inline __attribute__((always_inline)) -#define __malloc __attribute__((__malloc__)) -#define __attribute_const __attribute__((__const__)) - -#define __stringify_1(x) #x -#define __stringify(x) __stringify_1(x) - -#endif // types.h diff --git a/payloads/external/SeaBIOS/src/util.h b/payloads/external/SeaBIOS/src/util.h deleted file mode 100644 index 0de35229..00000000 --- a/payloads/external/SeaBIOS/src/util.h +++ /dev/null @@ -1,273 +0,0 @@ -// Misc function and variable declarations. -#ifndef __UTIL_H -#define __UTIL_H - -#include "types.h" // u32 - -// apm.c -void apm_shutdown(void); -struct bregs; -void handle_1553(struct bregs *regs); - -// bmp.c -struct bmp_decdata *bmp_alloc(void); -int bmp_decode(struct bmp_decdata *bmp, unsigned char *data, int data_size); -void bmp_get_info(struct bmp_decdata *bmp, int *width, int *height, int *bpp); -int bmp_show(struct bmp_decdata *bmp, unsigned char *pic, int width - , int height, int depth, int bytes_per_line_dest); - -// boot.c -void boot_init(void); -void boot_add_bev(u16 seg, u16 bev, u16 desc, int prio); -void boot_add_bcv(u16 seg, u16 ip, u16 desc, int prio); -struct drive_s; -void boot_add_floppy(struct drive_s *drive_g, const char *desc, int prio); -void boot_add_hd(struct drive_s *drive_g, const char *desc, int prio); -void boot_add_cd(struct drive_s *drive_g, const char *desc, int prio); -void boot_add_cbfs(void *data, const char *desc, int prio); -void interactive_bootmenu(void); -void bcv_prepboot(void); -u8 is_bootprio_strict(void); -struct pci_device; -int bootprio_find_pci_device(struct pci_device *pci); -int bootprio_find_mmio_device(void *mmio); -int bootprio_find_scsi_device(struct pci_device *pci, int target, int lun); -int bootprio_find_scsi_mmio_device(void *mmio, int target, int lun); -int bootprio_find_ata_device(struct pci_device *pci, int chanid, int slave); -int bootprio_find_fdc_device(struct pci_device *pci, int port, int fdid); -int bootprio_find_pci_rom(struct pci_device *pci, int instance); -int bootprio_find_named_rom(const char *name, int instance); -struct usbdevice_s; -int bootprio_find_usb(struct usbdevice_s *usbdev, int lun); -int get_keystroke_full(int msec); -int get_keystroke(int msec); -struct chs_s; -int boot_lchs_find_pci_device(struct pci_device *pci, struct chs_s *chs); -int boot_lchs_find_scsi_device(struct pci_device *pci, int target, int lun, - struct chs_s *chs); -int boot_lchs_find_ata_device(struct pci_device *pci, int chanid, int slave, - struct chs_s *chs); - -// bootsplash.c -void enable_vga_console(void); -void enable_bootsplash(void); -void disable_bootsplash(void); - -// cdrom.c -extern struct eltorito_s CDEmu; -extern struct drive_s *cdemu_drive_gf; -struct disk_op_s; -int cdemu_process_op(struct disk_op_s *op); -void cdrom_prepboot(void); -int cdrom_boot(struct drive_s *drive_g); -char *cdrom_media_info(struct drive_s *drive_g); - -// clock.c -void clock_setup(void); -void handle_1583(struct bregs *regs); -void clock_poll_irq(void); -u32 irqtimer_calc_ticks(u32 count); -u32 irqtimer_calc(u32 msecs); -int irqtimer_check(u32 end); -void handle_1586(struct bregs *regs); - -// fw/acpi.c -void acpi_setup(void); - -// fw/biostable.c -void copy_pir(void *pos); -void copy_mptable(void *pos); -extern struct pir_header *PirAddr; -void copy_acpi_rsdp(void *pos); -extern struct rsdp_descriptor *RsdpAddr; -extern u32 acpi_pm1a_cnt; -extern u16 acpi_pm_base; -void *find_acpi_rsdp(void); -void *find_acpi_table(u32 signature); -u32 find_resume_vector(void); -void acpi_reboot(void); -void find_acpi_features(void); -extern struct smbios_entry_point *SMBiosAddr; -struct smbios_entry_point *get_smbios_entry_point(); -void copy_smbios(void *pos); -void display_uuid(void); -void copy_table(void *pos); -void smbios_setup(void); - -// fw/dsdt_parser.c -struct acpi_device; -void acpi_dsdt_parse(void); -struct acpi_device *acpi_dsdt_find_string(struct acpi_device *prev, const char *hid); -struct acpi_device *acpi_dsdt_find_eisaid(struct acpi_device *prev, u16 eisaid); -char *acpi_dsdt_name(struct acpi_device *dev); -int acpi_dsdt_present_eisaid(u16 eisaid); -int acpi_dsdt_find_io(struct acpi_device *dev, u64 *min, u64 *max); -int acpi_dsdt_find_mem(struct acpi_device *dev, u64 *min, u64 *max); -int acpi_dsdt_find_irq(struct acpi_device *dev, u64 *irq); - -// fw/coreboot.c -extern const char *CBvendor, *CBpart; -struct cbfs_file; -void coreboot_debug_putc(char c); -void cbfs_run_payload(struct cbfs_file *file); -void coreboot_platform_setup(void); -void cbfs_payload_setup(void); -void coreboot_preinit(void); -void coreboot_cbfs_init(void); -struct cb_header; -void *find_cb_subtable(struct cb_header *cbh, u32 tag); -struct cb_header *find_cb_table(void); - -// fw/csm.c -int csm_bootprio_fdc(struct pci_device *pci, int port, int fdid); -int csm_bootprio_ata(struct pci_device *pci, int chanid, int slave); -int csm_bootprio_pci(struct pci_device *pci); - -// fw/mptable.c -void mptable_setup(void); - -// fw/mtrr.c -void mtrr_setup(void); - -// fw/multiboot.c -void multiboot_init(void); - -// fw/pciinit.c -extern u64 pcimem_start, pcimem_end; -extern u64 pcimem64_start, pcimem64_end; -extern const u8 pci_irqs[4]; -void pci_setup(void); -void pci_resume(void); - -// fw/pirtable.c -void pirtable_setup(void); - -// fw/shadow.c -void make_bios_writable(void); -void make_bios_readonly(void); -void qemu_reboot(void); - -// fw/smbios.c -void smbios_legacy_setup(void); - -// fw/smm.c -void smm_device_setup(void); -void smm_setup(void); - -// fw/smp.c -extern u32 MaxCountCPUs; -void wrmsr_smp(u32 index, u64 val); -void smp_setup(void); -void smp_resume(void); -int apic_id_is_present(u8 apic_id); - -// hw/dma.c -int dma_floppy(u32 addr, int count, int isWrite); -void dma_setup(void); - -// hw/floppy.c -extern struct floppy_ext_dbt_s diskette_param_table2; -void floppy_setup(void); -struct drive_s *init_floppy(int floppyid, int ftype); -int find_floppy_type(u32 size); -int floppy_process_op(struct disk_op_s *op); -void floppy_tick(void); - -// hw/ramdisk.c -void ramdisk_setup(void); -int ramdisk_process_op(struct disk_op_s *op); - -// hw/sdcard.c -int sdcard_process_op(struct disk_op_s *op); -void sdcard_setup(void); - -// hw/timer.c -void timer_setup(void); -void pmtimer_setup(u16 ioport); -void tsctimer_setfreq(u32 khz, const char *src); -u32 timer_calc(u32 msecs); -u32 timer_calc_usec(u32 usecs); -int timer_check(u32 end); -void ndelay(u32 count); -void udelay(u32 count); -void mdelay(u32 count); -void nsleep(u32 count); -void usleep(u32 count); -void msleep(u32 count); -u32 ticks_to_ms(u32 ticks); -u32 ticks_from_ms(u32 ms); -void pit_setup(void); - -// jpeg.c -struct jpeg_decdata *jpeg_alloc(void); -int jpeg_decode(struct jpeg_decdata *jpeg, unsigned char *buf); -void jpeg_get_size(struct jpeg_decdata *jpeg, int *width, int *height); -int jpeg_show(struct jpeg_decdata *jpeg, unsigned char *pic, int width - , int height, int depth, int bytes_per_line_dest); - -// kbd.c -void kbd_init(void); -void handle_15c2(struct bregs *regs); -void process_key(u8 key); -u8 enqueue_key(u16 keycode); -u16 ascii_to_keycode(u8 ascii); - -// misc.c -extern int HaveRunPost; -extern struct bios_config_table_s BIOS_CONFIG_TABLE __aligned(1); -extern struct floppy_dbt_s diskette_param_table __aligned(1); -extern u8 BiosChecksum; -int in_post(void); -void mathcp_setup(void); - -// mouse.c -void mouse_init(void); -void process_mouse(u8 data); - -// optionroms.c -struct rom_header; -void callrom(struct rom_header *rom, u16 bdf); -void call_bcv(u16 seg, u16 ip); -int is_pci_vga(struct pci_device *pci); -void optionrom_setup(void); -void vgarom_setup(void); -void s3_resume_vga(void); -extern int ScreenAndDebug; - -// pcibios.c -void handle_1ab1(struct bregs *regs); -void bios32_init(void); - -// pmm.c -void pmm_init(void); -void pmm_prepboot(void); - -// pnpbios.c -u16 get_pnp_offset(void); -void pnp_init(void); - -// post.c -void interface_init(void); -void device_hardware_setup(void); -void prepareboot(void); -void startBoot(void); -void reloc_preinit(void *f, void *arg); -void code_mutable_preinit(void); - -// sercon.c -void sercon_setup(void); -void sercon_check_event(void); - -// serial.c -void serial_setup(void); -void lpt_setup(void); - -// version.c -extern const char VERSION[], BUILDINFO[]; - -// vgahooks.c -void handle_155f(struct bregs *regs); -void handle_157f(struct bregs *regs); -void vgahook_setup(struct pci_device *pci); - -#endif // util.h diff --git a/payloads/external/SeaBIOS/src/version.c b/payloads/external/SeaBIOS/src/version.c deleted file mode 100644 index a8a58cf0..00000000 --- a/payloads/external/SeaBIOS/src/version.c +++ /dev/null @@ -1,5 +0,0 @@ -// Place build generated version into a C variable -#include "autoversion.h" - -char VERSION[] = BUILD_VERSION; -char BUILDINFO[] = BUILD_TOOLS; diff --git a/payloads/external/SeaBIOS/src/vgahooks.c b/payloads/external/SeaBIOS/src/vgahooks.c deleted file mode 100644 index 1f149532..00000000 --- a/payloads/external/SeaBIOS/src/vgahooks.c +++ /dev/null @@ -1,355 +0,0 @@ -// Hooks for via vgabios calls into main bios. -// -// Copyright (C) 2008 Kevin O'Connor <kevin@koconnor.net> -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "biosvar.h" // GET_GLOBAL -#include "bregs.h" // set_code_invalid -#include "config.h" // CONFIG_* -#include "hw/pci.h" // pci_config_readb -#include "hw/pcidevice.h" // pci_find_device -#include "hw/pci_ids.h" // PCI_VENDOR_ID_VIA -#include "hw/pci_regs.h" // PCI_VENDOR_ID -#include "output.h" // dprintf -#include "string.h" // strcmp -#include "util.h" // handle_155f, handle_157f - -#define VH_VIA 1 -#define VH_INTEL 2 -#define VH_SMI 3 - -int VGAHookHandlerType VARFSEG; - -static void -handle_155fXX(struct bregs *regs) -{ - set_code_unimplemented(regs, RET_EUNSUPPORTED); -} - -static void -handle_157fXX(struct bregs *regs) -{ - set_code_unimplemented(regs, RET_EUNSUPPORTED); -} - -/**************************************************************** - * Via hooks - ****************************************************************/ - -int ViaFBsize VARFSEG, ViaRamSpeed VARFSEG; - -static void -via_155f01(struct bregs *regs) -{ - regs->eax = 0x5f; - regs->cl = 2; // panel type = 2 = 1024 * 768 - set_success(regs); - dprintf(1, "Warning: VGA panel type is hardcoded\n"); -} - -static void -via_155f02(struct bregs *regs) -{ - regs->eax = 0x5f; - regs->bx = 2; - regs->cx = 0x401; // PAL + crt only - regs->dx = 0; // TV Layout - default - set_success(regs); - dprintf(1, "Warning: VGA TV/CRT output type is hardcoded\n"); -} - -static void -via_155f18(struct bregs *regs) -{ - int fbsize = GET_GLOBAL(ViaFBsize), ramspeed = GET_GLOBAL(ViaRamSpeed); - if (fbsize < 0 || ramspeed < 0) { - set_code_invalid(regs, RET_EUNSUPPORTED); - return; - } - regs->eax = 0x5f; - regs->ebx = 0x500 | (ramspeed << 4) | fbsize; - regs->ecx = 0x060; - set_success(regs); -} - -static void -via_155f19(struct bregs *regs) -{ - set_invalid_silent(regs); -} - -static void -via_155f(struct bregs *regs) -{ - switch (regs->al) { - case 0x01: via_155f01(regs); break; - case 0x02: via_155f02(regs); break; - case 0x18: via_155f18(regs); break; - case 0x19: via_155f19(regs); break; - default: handle_155fXX(regs); break; - } -} - -static int -getFBSize(struct pci_device *pci) -{ - /* FB config */ - u8 reg = pci_config_readb(pci->bdf, 0xa1); - - /* GFX disabled ? */ - if (!(reg & 0x80)) - return -1; - - static u8 mem_power[] = {0, 3, 4, 5, 6, 7, 8, 9}; - return mem_power[(reg >> 4) & 0x7]; -} - -static int -getViaRamSpeed(struct pci_device *pci) -{ - return (pci_config_readb(pci->bdf, 0x90) & 0x07) + 3; -} - -static int -getAMDRamSpeed(void) -{ - struct pci_device *pci = pci_find_device(PCI_VENDOR_ID_AMD - , PCI_DEVICE_ID_AMD_K8_NB_MEMCTL); - if (!pci) - return -1; - - /* mem clk 0 = DDR2 400 */ - return (pci_config_readb(pci->bdf, 0x94) & 0x7) + 6; -} - -/* int 0x15 - 5f18 - - ECX = unknown/don't care - EBX[3..0] Frame Buffer Size 2^N MiB - EBX[7..4] Memory speed: - 0: SDR 66Mhz - 1: SDR 100Mhz - 2: SDR 133Mhz - 3: DDR 100Mhz (PC1600 or DDR200) - 4: DDR 133Mhz (PC2100 or DDR266) - 5: DDR 166Mhz (PC2700 or DDR333) - 6: DDR 200Mhz (PC3200 or DDR400) - 7: DDR2 133Mhz (DDR2 533) - 8: DDR2 166Mhz (DDR2 667) - 9: DDR2 200Mhz (DDR2 800) - A: DDR2 233Mhz (DDR2 1066) - B: and above: Unknown - EBX[?..8] Total memory size? - EAX = 0x5f for success -*/ - -#define PCI_DEVICE_ID_VIA_K8M890CE_3 0x3336 -#define PCI_DEVICE_ID_VIA_VX855_MEMCTRL 0x3409 - -static void -via_setup(struct pci_device *pci) -{ - VGAHookHandlerType = VH_VIA; - - struct pci_device *d = pci_find_device(PCI_VENDOR_ID_VIA - , PCI_DEVICE_ID_VIA_K8M890CE_3); - if (d) { - ViaFBsize = getFBSize(d); - ViaRamSpeed = getAMDRamSpeed(); - return; - } - d = pci_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VX855_MEMCTRL); - if (d) { - ViaFBsize = getFBSize(d); - ViaRamSpeed = getViaRamSpeed(d); - return; - } - - dprintf(1, "Warning: VGA memory size and speed is hardcoded\n"); - ViaFBsize = 5; // 32M frame buffer - ViaRamSpeed = 4; // MCLK = DDR266 -} - - -/**************************************************************** - * Intel VGA hooks - ****************************************************************/ - -u8 IntelDisplayType VARFSEG, IntelDisplayId VARFSEG; - -static void -intel_155f35(struct bregs *regs) -{ - regs->ax = 0x005f; - regs->cl = GET_GLOBAL(IntelDisplayType); - set_success(regs); -} - -static void -intel_155f40(struct bregs *regs) -{ - regs->ax = 0x005f; - regs->cl = GET_GLOBAL(IntelDisplayId); - set_success(regs); -} - -static void -intel_155f50(struct bregs *regs) -{ - /* Mandatory hook on some Dell laptops */ - regs->ax = 0x005f; - set_success(regs); -} - -static void -intel_155f(struct bregs *regs) -{ - switch (regs->al) { - case 0x35: intel_155f35(regs); break; - case 0x40: intel_155f40(regs); break; - case 0x50: intel_155f50(regs); break; - default: handle_155fXX(regs); break; - } -} - -#define BOOT_DISPLAY_DEFAULT (0) -#define BOOT_DISPLAY_CRT (1 << 0) -#define BOOT_DISPLAY_TV (1 << 1) -#define BOOT_DISPLAY_EFP (1 << 2) -#define BOOT_DISPLAY_LCD (1 << 3) -#define BOOT_DISPLAY_CRT2 (1 << 4) -#define BOOT_DISPLAY_TV2 (1 << 5) -#define BOOT_DISPLAY_EFP2 (1 << 6) -#define BOOT_DISPLAY_LCD2 (1 << 7) - -static void -intel_setup(struct pci_device *pci) -{ - VGAHookHandlerType = VH_INTEL; - - IntelDisplayType = BOOT_DISPLAY_DEFAULT; - IntelDisplayId = 3; -} - -static void -roda_setup(struct pci_device *pci) -{ - VGAHookHandlerType = VH_INTEL; - // IntelDisplayType = BOOT_DISPLAY_DEFAULT; - IntelDisplayType = BOOT_DISPLAY_LCD; - // IntelDisplayId = inb(0x60f) & 0x0f; // Correct according to Crete - IntelDisplayId = 3; // Correct according to empirical studies -} - -static void -kontron_setup(struct pci_device *pci) -{ - VGAHookHandlerType = VH_INTEL; - IntelDisplayType = BOOT_DISPLAY_CRT; - IntelDisplayId = 3; -} - -static void -getac_setup(struct pci_device *pci) -{ -} - -/**************************************************************** - * Silicon Motion hooks - ****************************************************************/ - -u8 SmiBootDisplay VARFSEG; // 1: LCD, 2: CRT, 3: Both */ - -static void -smi_157f02(struct bregs *regs) -{ - /* Boot Display Device Override */ - regs->ax = 0x007f; - regs->bl = GET_GLOBAL(SmiBootDisplay); - set_success(regs); -} - -static void -smi_157f14(struct bregs *regs) -{ - /* ReduceOn support default status */ - regs->ax = 0x007f; - regs->bl = 0x00; - set_success(regs); -} - -static void -smi_157f(struct bregs *regs) -{ - switch (regs->al) { - case 0x02: smi_157f02(regs); break; - case 0x14: smi_157f14(regs); break; - default: handle_157fXX(regs); break; - } -} - -static void -winent_mb6047_setup(struct pci_device *pci) -{ - VGAHookHandlerType = VH_SMI; - SmiBootDisplay = 0x02; -} - -/**************************************************************** - * Entry and setup - ****************************************************************/ - -// Main 16bit entry point -void -handle_155f(struct bregs *regs) -{ - if (!CONFIG_VGAHOOKS) { - handle_155fXX(regs); - return; - } - - int htype = GET_GLOBAL(VGAHookHandlerType); - switch (htype) { - case VH_VIA: via_155f(regs); break; - case VH_INTEL: intel_155f(regs); break; - default: handle_155fXX(regs); break; - } -} - -// Main 16bit entry point -void -handle_157f(struct bregs *regs) -{ - if (!CONFIG_VGAHOOKS) { - handle_157fXX(regs); - return; - } - - int htype = GET_GLOBAL(VGAHookHandlerType); - switch (htype) { - case VH_SMI: smi_157f(regs); break; - default: handle_157fXX(regs); break; - } -} - -// Setup -void -vgahook_setup(struct pci_device *pci) -{ - if (!CONFIG_VGAHOOKS) - return; - - if (strcmp(CBvendor, "KONTRON") == 0 && strcmp(CBpart, "986LCD-M") == 0) - kontron_setup(pci); - else if (strcmp(CBvendor, "GETAC") == 0 && strcmp(CBpart, "P470") == 0) - getac_setup(pci); - else if (strcmp(CBvendor, "RODA") == 0 && strcmp(CBpart, "RK886EX") == 0) - roda_setup(pci); - else if (strcmp(CBvendor, "Win Enterprise") == 0 && strcmp(CBpart, "MB6047") == 0) - winent_mb6047_setup(pci); - else if (pci->vendor == PCI_VENDOR_ID_VIA) - via_setup(pci); - else if (pci->vendor == PCI_VENDOR_ID_INTEL) - intel_setup(pci); -} diff --git a/payloads/external/SeaBIOS/src/x86.c b/payloads/external/SeaBIOS/src/x86.c deleted file mode 100644 index 0fdf86f9..00000000 --- a/payloads/external/SeaBIOS/src/x86.c +++ /dev/null @@ -1,23 +0,0 @@ -// X86 utility functions. -// -// Copyright (C) 2013 Kevin O'Connor <kevin@koconnor.net> -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "x86.h" // __cpuid - -void -cpuid(u32 index, u32 *eax, u32 *ebx, u32 *ecx, u32 *edx) -{ - // Check for cpu id - u32 origflags = save_flags(); - restore_flags(origflags ^ F_ID); - u32 newflags = save_flags(); - restore_flags(origflags); - - if (((origflags ^ newflags) & F_ID) != F_ID) - // no cpuid - *eax = *ebx = *ecx = *edx = 0; - else - __cpuid(index, eax, ebx, ecx, edx); -} diff --git a/payloads/external/SeaBIOS/src/x86.h b/payloads/external/SeaBIOS/src/x86.h deleted file mode 100644 index 43a9e6d8..00000000 --- a/payloads/external/SeaBIOS/src/x86.h +++ /dev/null @@ -1,284 +0,0 @@ -// Basic x86 asm functions. -#ifndef __X86_H -#define __X86_H - -// CPU flag bitdefs -#define F_CF (1<<0) -#define F_ZF (1<<6) -#define F_IF (1<<9) -#define F_ID (1<<21) - -// CR0 flags -#define CR0_PG (1<<31) // Paging -#define CR0_CD (1<<30) // Cache disable -#define CR0_NW (1<<29) // Not Write-through -#define CR0_PE (1<<0) // Protection enable - -// PORT_A20 bitdefs -#define PORT_A20 0x0092 -#define A20_ENABLE_BIT 0x02 - -#ifndef __ASSEMBLY__ - -#include "types.h" // u32 - -static inline void irq_disable(void) -{ - asm volatile("cli": : :"memory"); -} - -static inline void irq_enable(void) -{ - asm volatile("sti": : :"memory"); -} - -static inline u32 save_flags(void) -{ - u32 flags; - asm volatile("pushfl ; popl %0" : "=rm" (flags)); - return flags; -} - -static inline void restore_flags(u32 flags) -{ - asm volatile("pushl %0 ; popfl" : : "g" (flags) : "memory", "cc"); -} - -static inline void cpu_relax(void) -{ - asm volatile("rep ; nop": : :"memory"); -} - -static inline void nop(void) -{ - asm volatile("nop"); -} - -static inline void hlt(void) -{ - asm volatile("hlt": : :"memory"); -} - -static inline void wbinvd(void) -{ - asm volatile("wbinvd": : :"memory"); -} - -#define CPUID_TSC (1 << 4) -#define CPUID_MSR (1 << 5) -#define CPUID_APIC (1 << 9) -#define CPUID_MTRR (1 << 12) -#define CPUID_X2APIC (1 << 21) -static inline void __cpuid(u32 index, u32 *eax, u32 *ebx, u32 *ecx, u32 *edx) -{ - asm("cpuid" - : "=a" (*eax), "=b" (*ebx), "=c" (*ecx), "=d" (*edx) - : "0" (index)); -} - -static inline u32 cr0_read(void) { - u32 cr0; - asm("movl %%cr0, %0" : "=r"(cr0)); - return cr0; -} -static inline void cr0_write(u32 cr0) { - asm("movl %0, %%cr0" : : "r"(cr0)); -} -static inline void cr0_mask(u32 off, u32 on) { - cr0_write((cr0_read() & ~off) | on); -} -static inline u16 cr0_vm86_read(void) { - u16 cr0; - asm("smsww %0" : "=r"(cr0)); - return cr0; -} - -static inline u64 rdmsr(u32 index) -{ - u64 ret; - asm ("rdmsr" : "=A"(ret) : "c"(index)); - return ret; -} - -static inline void wrmsr(u32 index, u64 val) -{ - asm volatile ("wrmsr" : : "c"(index), "A"(val)); -} - -static inline u64 rdtscll(void) -{ - u64 val; - asm volatile("rdtsc" : "=A" (val)); - return val; -} - -static inline u32 __ffs(u32 word) -{ - asm("bsf %1,%0" - : "=r" (word) - : "rm" (word)); - return word; -} -static inline u32 __fls(u32 word) -{ - asm("bsr %1,%0" - : "=r" (word) - : "rm" (word)); - return word; -} - -static inline u32 getesp(void) { - u32 esp; - asm("movl %%esp, %0" : "=rm"(esp)); - return esp; -} - -static inline u32 rol(u32 val, u16 rol) { - u32 res; - asm volatile("roll %%cl, %%eax" - : "=a" (res) : "a" (val), "c" (rol)); - return res; -} - -static inline u32 ror(u32 val, u16 ror) { - u32 res; - asm volatile("rorl %%cl, %%eax" - : "=a" (res) : "a" (val), "c" (ror)); - return res; -} - -static inline void outb(u8 value, u16 port) { - __asm__ __volatile__("outb %b0, %w1" : : "a"(value), "Nd"(port)); -} -static inline void outw(u16 value, u16 port) { - __asm__ __volatile__("outw %w0, %w1" : : "a"(value), "Nd"(port)); -} -static inline void outl(u32 value, u16 port) { - __asm__ __volatile__("outl %0, %w1" : : "a"(value), "Nd"(port)); -} -static inline u8 inb(u16 port) { - u8 value; - __asm__ __volatile__("inb %w1, %b0" : "=a"(value) : "Nd"(port)); - return value; -} -static inline u16 inw(u16 port) { - u16 value; - __asm__ __volatile__("inw %w1, %w0" : "=a"(value) : "Nd"(port)); - return value; -} -static inline u32 inl(u16 port) { - u32 value; - __asm__ __volatile__("inl %w1, %0" : "=a"(value) : "Nd"(port)); - return value; -} - -static inline void insb(u16 port, u8 *data, u32 count) { - asm volatile("rep insb (%%dx), %%es:(%%edi)" - : "+c"(count), "+D"(data) : "d"(port) : "memory"); -} -static inline void insw(u16 port, u16 *data, u32 count) { - asm volatile("rep insw (%%dx), %%es:(%%edi)" - : "+c"(count), "+D"(data) : "d"(port) : "memory"); -} -static inline void insl(u16 port, u32 *data, u32 count) { - asm volatile("rep insl (%%dx), %%es:(%%edi)" - : "+c"(count), "+D"(data) : "d"(port) : "memory"); -} -// XXX - outs not limited to es segment -static inline void outsb(u16 port, u8 *data, u32 count) { - asm volatile("rep outsb %%es:(%%esi), (%%dx)" - : "+c"(count), "+S"(data) : "d"(port) : "memory"); -} -static inline void outsw(u16 port, u16 *data, u32 count) { - asm volatile("rep outsw %%es:(%%esi), (%%dx)" - : "+c"(count), "+S"(data) : "d"(port) : "memory"); -} -static inline void outsl(u16 port, u32 *data, u32 count) { - asm volatile("rep outsl %%es:(%%esi), (%%dx)" - : "+c"(count), "+S"(data) : "d"(port) : "memory"); -} - -/* Compiler barrier is enough as an x86 CPU does not reorder reads or writes */ -static inline void smp_rmb(void) { - barrier(); -} -static inline void smp_wmb(void) { - barrier(); -} - -static inline void writel(void *addr, u32 val) { - barrier(); - *(volatile u32 *)addr = val; -} -static inline void writew(void *addr, u16 val) { - barrier(); - *(volatile u16 *)addr = val; -} -static inline void writeb(void *addr, u8 val) { - barrier(); - *(volatile u8 *)addr = val; -} -static inline u64 readq(const void *addr) { - u64 val = *(volatile const u64 *)addr; - barrier(); - return val; -} -static inline u32 readl(const void *addr) { - u32 val = *(volatile const u32 *)addr; - barrier(); - return val; -} -static inline u16 readw(const void *addr) { - u16 val = *(volatile const u16 *)addr; - barrier(); - return val; -} -static inline u8 readb(const void *addr) { - u8 val = *(volatile const u8 *)addr; - barrier(); - return val; -} - -// GDT bits -#define GDT_CODE (0x9bULL << 40) // Code segment - P,R,A bits also set -#define GDT_DATA (0x93ULL << 40) // Data segment - W,A bits also set -#define GDT_B (0x1ULL << 54) // Big flag -#define GDT_G (0x1ULL << 55) // Granularity flag -// GDT bits for segment base -#define GDT_BASE(v) ((((u64)(v) & 0xff000000) << 32) \ - | (((u64)(v) & 0x00ffffff) << 16)) -// GDT bits for segment limit (0-1Meg) -#define GDT_LIMIT(v) ((((u64)(v) & 0x000f0000) << 32) \ - | (((u64)(v) & 0x0000ffff) << 0)) -// GDT bits for segment limit (0-4Gig in 4K chunks) -#define GDT_GRANLIMIT(v) (GDT_G | GDT_LIMIT((v) >> 12)) - -struct descloc_s { - u16 length; - u32 addr; -} PACKED; - -static inline void sgdt(struct descloc_s *desc) { - asm("sgdtl %0" : "=m"(*desc)); -} -static inline void lgdt(struct descloc_s *desc) { - asm("lgdtl %0" : : "m"(*desc) : "memory"); -} - -static inline u8 get_a20(void) { - return (inb(PORT_A20) & A20_ENABLE_BIT) != 0; -} - -static inline u8 set_a20(u8 cond) { - u8 val = inb(PORT_A20), a20_enabled = (val & A20_ENABLE_BIT) != 0; - if (a20_enabled != !!cond) - outb(val ^ A20_ENABLE_BIT, PORT_A20); - return a20_enabled; -} - -// x86.c -void cpuid(u32 index, u32 *eax, u32 *ebx, u32 *ecx, u32 *edx); - -#endif // !__ASSEMBLY__ - -#endif // x86.h diff --git a/payloads/external/SeaBIOS/vgasrc/Kconfig b/payloads/external/SeaBIOS/vgasrc/Kconfig deleted file mode 100644 index c8fac36f..00000000 --- a/payloads/external/SeaBIOS/vgasrc/Kconfig +++ /dev/null @@ -1,222 +0,0 @@ -# Kconfig SeaBIOS VGA BIOS configuration - -menu "VGA ROM" - choice - prompt "VGA Hardware Type" - default NO_VGABIOS - - config NO_VGABIOS - bool "None" - help - Do not build a VGA BIOS. - - config VGA_STANDARD_VGA - depends on QEMU - bool "QEMU/Bochs Original IBM 256K VGA" - select VGA_STDVGA_PORTS - help - Build basic VGA BIOS support (pre Super-VGA) for use - on emulators. - - config VGA_CIRRUS - depends on QEMU - bool "QEMU/Bochs Cirrus SVGA" - select VGA_STDVGA_PORTS - help - Build support for Cirrus VGA emulation found on QEMU - and Bochs emulators. This is for emulators; it is not - intended for use on real Cirrus hardware. - - config VGA_ATI - depends on QEMU - bool "QEMU ATI SVGA" - select VGA_STDVGA_PORTS - help - Build support for ATI VGA emulation found on QEMU - and emulators. This is for emulators; it is not - intended for use on real ATI hardware. - - config VGA_BOCHS - depends on QEMU - bool "QEMU/Bochs VBE SVGA" - select VGA_STDVGA_PORTS - help - Build support for Bochs DISPI interface (a custom VBE - protocol) found on QEMU and Bochs emulators. - - config VGA_GEODEGX2 - bool "GeodeGX2" - select VGA_STDVGA_PORTS - help - Build support for Geode GX2 vga. - - config VGA_GEODELX - bool "GeodeLX" - select VGA_STDVGA_PORTS - help - Build support for Geode LX vga. - - config VGA_COREBOOT - depends on COREBOOT - bool "coreboot linear framebuffer" - select VGA_EMULATE_TEXT - help - Build support for a vgabios wrapper around video - devices initialized using coreboot native vga init. - - config DISPLAY_BOCHS - depends on QEMU - bool "qemu bochs-display support" - select VGA_EMULATE_TEXT - help - Build support for the qemu bochs-display device, which - is basically qemu stdvga without the legacy vga - emulation, supporting only 16+32 bpp VESA video modes - in a linear framebuffer. So this uses cbvga text mode - emulation. - - The bochs-display device is available in qemu - v3.0+. The vgabios works with the qemu stdvga too (use - "qemu -device VGA,romfile=/path/to/vgabios.bin")". - - config VGA_RAMFB - depends on QEMU - bool "qemu ramfb" - select VGA_EMULATE_TEXT - help - qemu ram framebuffer support (-device ramfb). - - endchoice - - choice - depends on VGA_BOCHS - prompt "bochs vga variant" - default VGA_BOCHS_STDVGA - - config VGA_BOCHS_STDVGA - bool "qemu stdvga / bochs svga" - - config VGA_BOCHS_VMWARE - bool "qemu vmware svga" - - config VGA_BOCHS_QXL - bool "qemu qxl vga" - - config VGA_BOCHS_VIRTIO - bool "qemu virtio vga" - - endchoice - - choice - depends on VGA_GEODEGX2 || VGA_GEODELX - prompt "Output Mode" - default VGA_OUTPUT_CRT - - config VGA_OUTPUT_CRT - bool "CRT" - help - Use CRT for output. - - config VGA_OUTPUT_PANEL - bool "Flat Panel" - help - Use flat panel for output. - - config VGA_OUTPUT_CRT_PANEL - bool "CRT and Flat Panel" - help - Use CRT and flat panel for output. - endchoice - - config BUILD_VGABIOS - bool - default !NO_VGABIOS - - config VGA_STDVGA_PORTS - bool - config VGA_EMULATE_TEXT - bool - help - Support emulating text mode features when only a - framebuffer is available. - - config VGA_FIXUP_ASM - depends on BUILD_VGABIOS - bool "Fixup assembler to work with broken emulators" - default y - help - This option will cause the build to attempt to avoid - certain x86 machine instructions that are known to confuse - some emulators. In particular, it works around - deficiencies in the Windows vgabios emulator and the - x86emu vgabios emulator (frequently used in Xorg). - - config VGA_ALLOCATE_EXTRA_STACK - depends on BUILD_VGABIOS - bool "Allocate an internal stack for 16bit interrupt entry point" - default y - help - Attempt to allocate (via BIOS PMM call) an internal stack - for the legacy 16bit 0x10 interrupt entry point. This - reduces the amount of space on the caller's stack that - SeaVGABIOS uses. - - config VGA_EXTRA_STACK_SIZE - int - default 512 - - config VGA_VBE - depends on BUILD_VGABIOS - bool "Video BIOS Extensions (VBE)" - default y - help - Support VBE. - - config VGA_PCI - depends on BUILD_VGABIOS && !VGA_COREBOOT - bool "PCI ROM Headers" - default y - help - Build PCI ROM headers so the vga rom can be extracted from - a PCI device. - - config OVERRIDE_PCI_ID - depends on VGA_PCI - bool "Override PCI Vendor and Device IDs" - help - Specify specific values for the PCI Vendor and Device IDs. - - config VGA_VID - depends on VGA_PCI - hex - prompt "PCI Vendor ID" if OVERRIDE_PCI_ID - default 0x1013 if VGA_CIRRUS - default 0x1002 if VGA_ATI - default 0x1234 if VGA_BOCHS_STDVGA - default 0x15ad if VGA_BOCHS_VMWARE - default 0x1b36 if VGA_BOCHS_QXL - default 0x1af4 if VGA_BOCHS_VIRTIO - default 0x100b if VGA_GEODEGX2 - default 0x1022 if VGA_GEODELX - default 0x1234 if DISPLAY_BOCHS - default 0x0000 - help - Vendor ID for the PCI ROM - - config VGA_DID - depends on VGA_PCI - hex - prompt "PCI Vendor ID" if OVERRIDE_PCI_ID - default 0x00b8 if VGA_CIRRUS - default 0x5159 if VGA_ATI - default 0x1111 if VGA_BOCHS_STDVGA - default 0x0405 if VGA_BOCHS_VMWARE - default 0x0100 if VGA_BOCHS_QXL - default 0x1050 if VGA_BOCHS_VIRTIO - default 0x0030 if VGA_GEODEGX2 - default 0x2081 if VGA_GEODELX - default 0x1111 if DISPLAY_BOCHS - default 0x0000 - help - Device ID for the PCI ROM -endmenu diff --git a/payloads/external/SeaBIOS/vgasrc/ati-tables.S b/payloads/external/SeaBIOS/vgasrc/ati-tables.S deleted file mode 100644 index cdbde2fa..00000000 --- a/payloads/external/SeaBIOS/vgasrc/ati-tables.S +++ /dev/null @@ -1,43 +0,0 @@ -// -// Fake ati bios tables. -// -// aty128fb and radeonfb try to gather informations from these tables, -// so add some stuff here to make the drivers happy. Specifically -// radeonfb needs the pll information, otherwise it'll crash with a -// division by zero ... -// - .org 0x48 - .word _ati_main - - // main info - .org 0x50 -_ati_main: - .org 0x50 + 0x30 - .word _ati_pll - .org 0x50 + 0x50 - .word _ati_connector - - // pll info - .org 0x100 -_ati_pll: - .word 0 // ??? (not used by radeonfb) - .word 0 - .word 0 - .word 0 - .word 23000 // sclk - .word 23000 // mclk - .word 0 - .word 2700 // ref_clk - .word 4 // ref_div - .long 12000 // ppll_min - .long 35000 // ppll_max - - // connector info - .org 0x140 -_ati_connector: - .byte 0x10 // one chip - .byte 0x01 // one connector - .word 0x3000 // type DVI-I - .word 0 // end of list - - .org 0x200 diff --git a/payloads/external/SeaBIOS/vgasrc/atiext.c b/payloads/external/SeaBIOS/vgasrc/atiext.c deleted file mode 100644 index 69dfd46e..00000000 --- a/payloads/external/SeaBIOS/vgasrc/atiext.c +++ /dev/null @@ -1,413 +0,0 @@ -// QEMU ATI VGABIOS Extension. -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "biosvar.h" // GET_GLOBAL -#include "bregs.h" // struct bregs -#include "hw/pci.h" // pci_config_readl -#include "hw/pci_regs.h" // PCI_BASE_ADDRESS_0 -#include "output.h" // dprintf -#include "stdvga.h" // VGAREG_SEQU_ADDRESS -#include "string.h" // memset16_far -#include "vgabios.h" // SET_VGA -#include "vgautil.h" // VBE_total_memory -#include "vgafb.h" // memset_high - -#include "svgamodes.h" - -#define MM_INDEX 0x0000 -#define MM_DATA 0x0004 -#define CRTC_GEN_CNTL 0x0050 -#define CRTC_EXT_CNTL 0x0054 -#define GPIO_VGA_DDC 0x0060 -#define GPIO_DVI_DDC 0x0064 -#define GPIO_MONID 0x0068 -#define CRTC_H_TOTAL_DISP 0x0200 -#define CRTC_V_TOTAL_DISP 0x0208 -#define CRTC_OFFSET 0x0224 -#define CRTC_PITCH 0x022c - -/* CRTC control values (CRTC_GEN_CNTL) */ -#define CRTC2_EXT_DISP_EN 0x01000000 -#define CRTC2_EN 0x02000000 - -#define CRTC_PIX_WIDTH_MASK 0x00000700 -#define CRTC_PIX_WIDTH_4BPP 0x00000100 -#define CRTC_PIX_WIDTH_8BPP 0x00000200 -#define CRTC_PIX_WIDTH_15BPP 0x00000300 -#define CRTC_PIX_WIDTH_16BPP 0x00000400 -#define CRTC_PIX_WIDTH_24BPP 0x00000500 -#define CRTC_PIX_WIDTH_32BPP 0x00000600 - -/* CRTC_EXT_CNTL */ -#define CRT_CRTC_DISPLAY_DIS 0x00000400 -#define CRT_CRTC_ON 0x00008000 - -static u32 ati_io_addr VAR16 = 0; -static u32 ati_i2c_reg VAR16; -static u32 ati_i2c_bit_scl_out VAR16; -static u32 ati_i2c_bit_sda_out VAR16; -static u32 ati_i2c_bit_sda_in VAR16; -static u32 ati_i2c_bit_enable VAR16 = -1; - - -int -is_ati_mode(struct vgamode_s *vmode_g) -{ - unsigned int mcount = GET_GLOBAL(svga_mcount); - - return (vmode_g >= &svga_modes[0].info && - vmode_g <= &svga_modes[mcount-1].info); -} - -struct vgamode_s * -ati_find_mode(int mode) -{ - u32 io_addr = GET_GLOBAL(ati_io_addr); - struct generic_svga_mode *table_g = svga_modes; - unsigned int mcount = GET_GLOBAL(svga_mcount); - - if (io_addr) { - while (table_g < &svga_modes[mcount]) { - if (GET_GLOBAL(table_g->mode) == mode) - return &table_g->info; - table_g++; - } - } - - return stdvga_find_mode(mode); -} - -void -ati_list_modes(u16 seg, u16 *dest, u16 *last) -{ - u32 io_addr = GET_GLOBAL(ati_io_addr); - unsigned int mcount = GET_GLOBAL(svga_mcount); - - dprintf(1, "%s: ati ext %s\n", __func__, io_addr ? "yes" : "no"); - if (io_addr) { - int i; - for (i=0; i<mcount && dest<last; i++) { - u16 mode = GET_GLOBAL(svga_modes[i].mode); - if (mode == 0xffff) - continue; - SET_FARVAR(seg, *dest, mode); - dest++; - } - } - - stdvga_list_modes(seg, dest, last); -} - -/**************************************************************** - * Mode setting - ****************************************************************/ - -static inline void ati_write(u32 reg, u32 val) -{ - u32 io_addr = GET_GLOBAL(ati_io_addr); - - if (reg < 0x100) { - outl(val, io_addr + reg); - } else { - outl(reg, io_addr + MM_INDEX); - outl(val, io_addr + MM_DATA); - } -} - -static inline u32 ati_read(u32 reg) -{ - u32 io_addr = GET_GLOBAL(ati_io_addr); - u32 val; - - if (reg < 0x100) { - val = inl(io_addr + reg); - } else { - outl(reg, io_addr + MM_INDEX); - val = inl(io_addr + MM_DATA); - } - return val; -} - -static void ati_clear(u32 offset, u32 size) -{ - u8 data[64]; - void *datap = MAKE_FLATPTR(GET_SEG(SS), data); - void *fb = (void*)(GET_GLOBAL(VBE_framebuffer) + offset); - u32 i, pos; - - for (i = 0; i < sizeof(data); i++) - data[i] = 0; - for (pos = 0; pos < size; pos += sizeof(data)) { - memcpy_high(fb, datap, sizeof(data)); - fb += sizeof(data); - } -} - -static int -ati_ext_mode(struct generic_svga_mode *table, int flags) -{ - u32 width = GET_GLOBAL(table->info.width); - u32 height = GET_GLOBAL(table->info.height); - u32 depth = GET_GLOBAL(table->info.depth); - u32 stride = width; - u32 offset = 0; - u32 pxmask = 0; - u32 bytes = 0; - - dprintf(1, "%s: 0x%x, %dx%d-%d\n", __func__, - GET_GLOBAL(table->mode), - width, height, depth); - - switch (depth) { - case 8: pxmask = CRTC_PIX_WIDTH_8BPP; bytes = 1; break; - case 15: pxmask = CRTC_PIX_WIDTH_15BPP; bytes = 2; break; - case 16: pxmask = CRTC_PIX_WIDTH_16BPP; bytes = 2; break; - case 24: pxmask = CRTC_PIX_WIDTH_24BPP; bytes = 3; break; - case 32: pxmask = CRTC_PIX_WIDTH_32BPP; bytes = 4; break; - } - - /* disable display */ - ati_write(CRTC_EXT_CNTL, CRT_CRTC_DISPLAY_DIS); - - /* modeset */ - ati_write(CRTC_GEN_CNTL, CRTC2_EXT_DISP_EN | CRTC2_EN | pxmask); - ati_write(CRTC_H_TOTAL_DISP, ((width / 8) - 1) << 16); - ati_write(CRTC_V_TOTAL_DISP, (height - 1) << 16); - ati_write(CRTC_OFFSET, offset); - ati_write(CRTC_PITCH, stride / 8); - - /* clear screen */ - if (!(flags & MF_NOCLEARMEM)) { - u32 size = width * height * bytes; - ati_clear(offset, size); - } - - /* enable display */ - ati_write(CRTC_EXT_CNTL, 0); - - return 0; -} - -int -ati_set_mode(struct vgamode_s *vmode_g, int flags) -{ - struct generic_svga_mode *table_g = - container_of(vmode_g, struct generic_svga_mode, info); - - if (is_ati_mode(vmode_g)) { - return ati_ext_mode(table_g, flags); - } - - ati_write(CRTC_GEN_CNTL, 0); - return stdvga_set_mode(vmode_g, flags); -} - -/**************************************************************** - * edid - ****************************************************************/ - -static void -ati_i2c_set_scl_sda(int scl, int sda) -{ - u32 enable = GET_GLOBAL(ati_i2c_bit_enable); - u32 data = 0; - - if (enable != -1) - data |= (1 << enable); - if (!scl) - data |= (1 << GET_GLOBAL(ati_i2c_bit_scl_out)); - if (!sda) - data |= (1 << GET_GLOBAL(ati_i2c_bit_sda_out)); - ati_write(GET_GLOBAL(ati_i2c_reg), data); -} - -static int -ati_i2c_get_sda(void) -{ - u32 data = ati_read(GET_GLOBAL(ati_i2c_reg)); - - return data & (1 << GET_GLOBAL(ati_i2c_bit_sda_in)) ? 1 : 0; -} - -static void ati_i2c_start(void) -{ - ati_i2c_set_scl_sda(1, 1); - ati_i2c_set_scl_sda(1, 0); - ati_i2c_set_scl_sda(0, 0); -} - -static void ati_i2c_ack(void) -{ - ati_i2c_set_scl_sda(0, 0); - ati_i2c_set_scl_sda(1, 0); - ati_i2c_set_scl_sda(0, 0); -} - -static void ati_i2c_stop(void) -{ - ati_i2c_set_scl_sda(0, 0); - ati_i2c_set_scl_sda(1, 0); - ati_i2c_set_scl_sda(1, 1); -} - -static void ati_i2c_send_byte(u8 byte) -{ - int i, bit; - - for (i = 0; i < 8; i++) { - bit = (1 << (7-i)) & byte ? 1 : 0; - ati_i2c_set_scl_sda(0, bit); - ati_i2c_set_scl_sda(1, bit); - ati_i2c_set_scl_sda(0, bit); - } -} - -static u8 ati_i2c_recv_byte(void) -{ - u8 byte = 0; - int i, bit; - - for (i = 0; i < 8; i++) { - ati_i2c_set_scl_sda(0, 1); - ati_i2c_set_scl_sda(1, 1); - bit = ati_i2c_get_sda(); - ati_i2c_set_scl_sda(0, 1); - if (bit) - byte |= (1 << (7-i)); - } - - return byte; -} - -static void ati_i2c_edid(void) -{ - u8 byte; - int i; - - ati_i2c_start(); - ati_i2c_send_byte(0x50 << 1 | 1); - ati_i2c_ack(); - for (i = 0; i < 128; i++) { - byte = ati_i2c_recv_byte(); - ati_i2c_ack(); - SET_VGA(VBE_edid[i], byte); - } - ati_i2c_stop(); -} - -static void ati_i2c_edid_radeon(void) -{ - int valid; - - SET_VGA(ati_i2c_bit_scl_out, 17); - SET_VGA(ati_i2c_bit_sda_out, 16); - SET_VGA(ati_i2c_bit_sda_in, 8); - - dprintf(1, "ati: reading edid blob (radeon vga) ... \n"); - SET_VGA(ati_i2c_reg, GPIO_VGA_DDC); - ati_i2c_edid(); - valid = (GET_GLOBAL(VBE_edid[0]) == 0x00 && - GET_GLOBAL(VBE_edid[1]) == 0xff); - dprintf(1, "ati: ... %s\n", valid ? "good" : "invalid"); - if (valid) - return; - - dprintf(1, "ati: reading edid blob (radeon dvi) ... \n"); - SET_VGA(ati_i2c_reg, GPIO_DVI_DDC); - ati_i2c_edid(); - valid = (GET_GLOBAL(VBE_edid[0]) == 0x00 && - GET_GLOBAL(VBE_edid[1]) == 0xff); - dprintf(1, "ati: ... %s\n", valid ? "good" : "invalid"); -} - -static void ati_i2c_edid_rage128(void) -{ - int valid; - - SET_VGA(ati_i2c_bit_enable, 25); - SET_VGA(ati_i2c_bit_scl_out, 18); - SET_VGA(ati_i2c_bit_sda_out, 17); - SET_VGA(ati_i2c_bit_sda_in, 9); - SET_VGA(ati_i2c_reg, GPIO_MONID); - - dprintf(1, "ati: reading edid blob (rage128) ... \n"); - ati_i2c_edid(); - valid = (GET_GLOBAL(VBE_edid[0]) == 0x00 && - GET_GLOBAL(VBE_edid[1]) == 0xff); - dprintf(1, "ati: ... %s\n", valid ? "good" : "invalid"); -} - -/**************************************************************** - * init - ****************************************************************/ - -int -ati_setup(void) -{ - int ret = stdvga_setup(); - if (ret) - return ret; - - dprintf(1, "%s:%d\n", __func__, __LINE__); - - if (GET_GLOBAL(HaveRunInit)) - return 0; - - int bdf = GET_GLOBAL(VgaBDF); - if (!CONFIG_VGA_PCI || bdf == 0) - return 0; - - u32 bar = pci_config_readl(bdf, PCI_BASE_ADDRESS_0); - u32 lfb_addr = bar & PCI_BASE_ADDRESS_MEM_MASK; - pci_config_writel(bdf, PCI_BASE_ADDRESS_0, ~0); - u32 barmask = pci_config_readl(bdf, PCI_BASE_ADDRESS_0); - u32 totalmem = ~(barmask & PCI_BASE_ADDRESS_MEM_MASK) + 1; - pci_config_writel(bdf, PCI_BASE_ADDRESS_0, bar); - - bar = pci_config_readl(bdf, PCI_BASE_ADDRESS_1); - u32 io_addr = bar & PCI_BASE_ADDRESS_IO_MASK; - - bar = pci_config_readl(bdf, PCI_BASE_ADDRESS_2); - u32 mmio_addr = bar & PCI_BASE_ADDRESS_MEM_MASK; - - dprintf(1, "ati: bdf %02x:%02x.%x, lfb 0x%x, %d MB, io 0x%x, mmio 0x%x\n", - pci_bdf_to_bus(bdf), pci_bdf_to_dev(bdf), pci_bdf_to_fn(bdf), - lfb_addr, totalmem / (1024 * 1024), io_addr, mmio_addr); - - SET_VGA(VBE_framebuffer, lfb_addr); - SET_VGA(VBE_total_memory, totalmem); - SET_VGA(ati_io_addr, io_addr); - - // Validate modes - struct generic_svga_mode *m = svga_modes; - unsigned int mcount = GET_GLOBAL(svga_mcount); - for (; m < &svga_modes[mcount]; m++) { - u8 memmodel = GET_GLOBAL(m->info.memmodel); - u16 width = GET_GLOBAL(m->info.width); - u16 height = GET_GLOBAL(m->info.height); - u32 mem = (height * DIV_ROUND_UP(width * vga_bpp(&m->info), 8) - * stdvga_vram_ratio(&m->info)); - - if (width % 8 != 0 || - width > 0x7ff * 8 || - height > 0xfff || - mem > totalmem || - memmodel != MM_DIRECT) { - dprintf(3, "ati: removing mode 0x%x\n", GET_GLOBAL(m->mode)); - SET_VGA(m->mode, 0xffff); - } - } - - u16 device = pci_config_readw(bdf, PCI_DEVICE_ID); - switch (device) { - case 0x5046: - ati_i2c_edid_rage128(); - break; - case 0x5159: - ati_i2c_edid_radeon(); - break; - } - - return 0; -} diff --git a/payloads/external/SeaBIOS/vgasrc/bochsdisplay.c b/payloads/external/SeaBIOS/vgasrc/bochsdisplay.c deleted file mode 100644 index d7ff3e9f..00000000 --- a/payloads/external/SeaBIOS/vgasrc/bochsdisplay.c +++ /dev/null @@ -1,79 +0,0 @@ -// Simple framebuffer vgabios for use with qemu bochs-display device -// -// Copyright (C) 2019 Gerd Hoffmann <kraxel@redhat.com> -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "biosvar.h" // GET_BDA -#include "output.h" // dprintf -#include "string.h" // memset16_far -#include "bochsvga.h" // VBE_BOCHS_* -#include "hw/pci.h" // pci_config_readl -#include "hw/pci_regs.h" // PCI_BASE_ADDRESS_0 -#include "vgabios.h" // SET_VGA -#include "vgautil.h" // VBE_total_memory - -#define FRAMEBUFFER_WIDTH 1024 -#define FRAMEBUFFER_HEIGHT 768 -#define FRAMEBUFFER_BPP 4 - -int -bochs_display_setup(void) -{ - dprintf(1, "bochs-display: setup called\n"); - - if (GET_GLOBAL(HaveRunInit)) - return 0; - - int bdf = GET_GLOBAL(VgaBDF); - if (bdf == 0) - return 0; - - u32 bar = pci_config_readl(bdf, PCI_BASE_ADDRESS_0); - u32 lfb_addr = bar & PCI_BASE_ADDRESS_MEM_MASK; - bar = pci_config_readl(bdf, PCI_BASE_ADDRESS_2); - u32 io_addr = bar & PCI_BASE_ADDRESS_IO_MASK; - dprintf(1, "bochs-display: bdf %02x:%02x.%x, bar 0 at 0x%x, bar 1 at 0x%x\n" - , pci_bdf_to_bus(bdf) , pci_bdf_to_dev(bdf), pci_bdf_to_fn(bdf), - lfb_addr, io_addr); - - u16 *dispi = (void*)(io_addr + 0x500); - u8 *vga = (void*)(io_addr + 0x400); - u16 id = readw(dispi + VBE_DISPI_INDEX_ID); - dprintf(1, "bochs-display: id is 0x%x, %s\n", id - , id == VBE_DISPI_ID5 ? "good" : "FAIL"); - if (id != VBE_DISPI_ID5) - return -1; - - int i; - u8 *edid = (void*)(io_addr); - for (i = 0; i < sizeof(VBE_edid); i++) - SET_VGA(VBE_edid[i], readb(edid + i)); - - int fb_width = FRAMEBUFFER_WIDTH; - int fb_height = FRAMEBUFFER_HEIGHT; - if (GET_GLOBAL(VBE_edid[0]) == 0x00 && - GET_GLOBAL(VBE_edid[1]) == 0xff) { - fb_width = GET_GLOBAL(VBE_edid[54 + 2]); - fb_width |= (GET_GLOBAL(VBE_edid[54 + 4]) & 0xf0) << 4; - fb_height = GET_GLOBAL(VBE_edid[54 + 5]); - fb_height |= (GET_GLOBAL(VBE_edid[54 + 7]) & 0xf0) << 4; - } - int fb_stride = FRAMEBUFFER_BPP * fb_width; - - dprintf(1, "bochs-display: using %dx%d, %d bpp (%d stride)\n" - , fb_width, fb_height - , FRAMEBUFFER_BPP * 8, fb_stride); - - cbvga_setup_modes(lfb_addr, FRAMEBUFFER_BPP * 8, - fb_width, fb_height, fb_stride); - - writew(dispi + VBE_DISPI_INDEX_XRES, fb_width); - writew(dispi + VBE_DISPI_INDEX_YRES, fb_height); - writew(dispi + VBE_DISPI_INDEX_BPP, FRAMEBUFFER_BPP * 8); - writew(dispi + VBE_DISPI_INDEX_ENABLE, VBE_DISPI_ENABLED); - - writeb(vga, 0x20); /* unblank (for qemu -device VGA) */ - - return 0; -} diff --git a/payloads/external/SeaBIOS/vgasrc/bochsvga.c b/payloads/external/SeaBIOS/vgasrc/bochsvga.c deleted file mode 100644 index fd5e586b..00000000 --- a/payloads/external/SeaBIOS/vgasrc/bochsvga.c +++ /dev/null @@ -1,390 +0,0 @@ -// Bochs VGA interface to extended "VBE" modes -// -// Copyright (C) 2012 Kevin O'Connor <kevin@koconnor.net> -// Copyright (C) 2011 Julian Pidancet <julian.pidancet@citrix.com> -// Copyright (C) 2002 Jeroen Janssen -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "biosvar.h" // GET_GLOBAL -#include "bochsvga.h" // bochsvga_set_mode -#include "config.h" // CONFIG_* -#include "hw/pci.h" // pci_config_readl -#include "hw/pci_regs.h" // PCI_BASE_ADDRESS_0 -#include "output.h" // dprintf -#include "std/vbe.h" // VBE_CAPABILITY_8BIT_DAC -#include "stdvga.h" // stdvga_get_linelength -#include "vgabios.h" // SET_VGA -#include "vgautil.h" // VBE_total_memory -#include "x86.h" // outw - - -/**************************************************************** - * Mode tables - ****************************************************************/ - -#include "svgamodes.h" - -static int dispi_found VAR16 = 0; - -static int is_bochsvga_mode(struct vgamode_s *vmode_g) -{ - unsigned int mcount = GET_GLOBAL(svga_mcount); - - return (vmode_g >= &svga_modes[0].info - && vmode_g <= &svga_modes[mcount-1].info); -} - -struct vgamode_s *bochsvga_find_mode(int mode) -{ - struct generic_svga_mode *m = svga_modes; - unsigned int mcount = GET_GLOBAL(svga_mcount); - - if (GET_GLOBAL(dispi_found)) - for (; m < &svga_modes[mcount]; m++) - if (GET_GLOBAL(m->mode) == mode) - return &m->info; - return stdvga_find_mode(mode); -} - -void -bochsvga_list_modes(u16 seg, u16 *dest, u16 *last) -{ - struct generic_svga_mode *m = svga_modes; - unsigned int mcount = GET_GLOBAL(svga_mcount); - - if (GET_GLOBAL(dispi_found)) { - for (; m < &svga_modes[mcount] && dest<last; m++) { - u16 mode = GET_GLOBAL(m->mode); - if (mode == 0xffff) - continue; - SET_FARVAR(seg, *dest, mode); - dest++; - } - } - stdvga_list_modes(seg, dest, last); -} - - -/**************************************************************** - * Helper functions - ****************************************************************/ - -static inline u16 dispi_read(u16 reg) -{ - outw(reg, VBE_DISPI_IOPORT_INDEX); - return inw(VBE_DISPI_IOPORT_DATA); -} -static inline void dispi_write(u16 reg, u16 val) -{ - outw(reg, VBE_DISPI_IOPORT_INDEX); - outw(val, VBE_DISPI_IOPORT_DATA); -} - -static u8 -bochsvga_dispi_enabled(void) -{ - if (!GET_GLOBAL(dispi_found)) - return 0; - u16 en = dispi_read(VBE_DISPI_INDEX_ENABLE); - if (!(en & VBE_DISPI_ENABLED)) - return 0; - return 1; -} - -int -bochsvga_get_window(struct vgamode_s *vmode_g, int window) -{ - if (!bochsvga_dispi_enabled()) - return stdvga_get_window(vmode_g, window); - if (window != 0) - return -1; - return dispi_read(VBE_DISPI_INDEX_BANK); -} - -int -bochsvga_set_window(struct vgamode_s *vmode_g, int window, int val) -{ - if (!bochsvga_dispi_enabled()) - return stdvga_set_window(vmode_g, window, val); - if (window != 0) - return -1; - dispi_write(VBE_DISPI_INDEX_BANK, val); - if (dispi_read(VBE_DISPI_INDEX_BANK) != val) - return -1; - return 0; -} - -int -bochsvga_get_linelength(struct vgamode_s *vmode_g) -{ - if (!bochsvga_dispi_enabled()) - return stdvga_get_linelength(vmode_g); - return dispi_read(VBE_DISPI_INDEX_VIRT_WIDTH) * vga_bpp(vmode_g) / 8; -} - -int -bochsvga_set_linelength(struct vgamode_s *vmode_g, int val) -{ - stdvga_set_linelength(vmode_g, val); - if (bochsvga_dispi_enabled()) { - int pixels = (val * 8) / vga_bpp(vmode_g); - dispi_write(VBE_DISPI_INDEX_VIRT_WIDTH, pixels); - } - return 0; -} - -int -bochsvga_get_displaystart(struct vgamode_s *vmode_g) -{ - if (!bochsvga_dispi_enabled()) - return stdvga_get_displaystart(vmode_g); - int bpp = vga_bpp(vmode_g); - int linelength = dispi_read(VBE_DISPI_INDEX_VIRT_WIDTH) * bpp / 8; - int x = dispi_read(VBE_DISPI_INDEX_X_OFFSET); - int y = dispi_read(VBE_DISPI_INDEX_Y_OFFSET); - return x * bpp / 8 + linelength * y; -} - -int -bochsvga_set_displaystart(struct vgamode_s *vmode_g, int val) -{ - stdvga_set_displaystart(vmode_g, val); - if (bochsvga_dispi_enabled()) { - int bpp = vga_bpp(vmode_g); - int linelength = dispi_read(VBE_DISPI_INDEX_VIRT_WIDTH) * bpp / 8; - if (!linelength) - return 0; - dispi_write(VBE_DISPI_INDEX_X_OFFSET, (val % linelength) * 8 / bpp); - dispi_write(VBE_DISPI_INDEX_Y_OFFSET, val / linelength); - } - return 0; -} - -int -bochsvga_get_dacformat(struct vgamode_s *vmode_g) -{ - if (!bochsvga_dispi_enabled()) - return stdvga_get_dacformat(vmode_g); - u16 en = dispi_read(VBE_DISPI_INDEX_ENABLE); - return (en & VBE_DISPI_8BIT_DAC) ? 8 : 6; -} - -int -bochsvga_set_dacformat(struct vgamode_s *vmode_g, int val) -{ - if (!bochsvga_dispi_enabled()) - return stdvga_set_dacformat(vmode_g, val); - u16 en = dispi_read(VBE_DISPI_INDEX_ENABLE); - if (val == 6) - en &= ~VBE_DISPI_8BIT_DAC; - else if (val == 8) - en |= VBE_DISPI_8BIT_DAC; - else - return -1; - dispi_write(VBE_DISPI_INDEX_ENABLE, en); - return 0; -} - -static int -bochsvga_save_state(u16 seg, u16 *info) -{ - u16 en = dispi_read(VBE_DISPI_INDEX_ENABLE); - SET_FARVAR(seg, *info, en); - info++; - if (!(en & VBE_DISPI_ENABLED)) - return 0; - int i; - for (i = VBE_DISPI_INDEX_XRES; i <= VBE_DISPI_INDEX_Y_OFFSET; i++) - if (i != VBE_DISPI_INDEX_ENABLE) { - u16 v = dispi_read(i); - SET_FARVAR(seg, *info, v); - info++; - } - return 0; -} - -static int -bochsvga_restore_state(u16 seg, u16 *info) -{ - u16 en = GET_FARVAR(seg, *info); - info++; - if (!(en & VBE_DISPI_ENABLED)) { - dispi_write(VBE_DISPI_INDEX_ENABLE, en); - return 0; - } - int i; - for (i = VBE_DISPI_INDEX_XRES; i <= VBE_DISPI_INDEX_Y_OFFSET; i++) - if (i == VBE_DISPI_INDEX_ENABLE) { - dispi_write(i, en); - } else { - dispi_write(i, GET_FARVAR(seg, *info)); - info++; - } - return 0; -} - -int -bochsvga_save_restore(int cmd, u16 seg, void *data) -{ - int ret = stdvga_save_restore(cmd, seg, data); - if (ret < 0 || !(cmd & SR_REGISTERS) || !GET_GLOBAL(dispi_found)) - return ret; - - u16 *info = (data + ret); - if (cmd & SR_SAVE) - bochsvga_save_state(seg, info); - if (cmd & SR_RESTORE) - bochsvga_restore_state(seg, info); - return ret + (VBE_DISPI_INDEX_Y_OFFSET-VBE_DISPI_INDEX_XRES+1)*sizeof(u16); -} - - -/**************************************************************** - * Mode setting - ****************************************************************/ - -int -bochsvga_set_mode(struct vgamode_s *vmode_g, int flags) -{ - if (GET_GLOBAL(dispi_found)) - dispi_write(VBE_DISPI_INDEX_ENABLE, VBE_DISPI_DISABLED); - if (! is_bochsvga_mode(vmode_g)) - return stdvga_set_mode(vmode_g, flags); - if (!GET_GLOBAL(dispi_found)) - return -1; - - u8 memmodel = GET_GLOBAL(vmode_g->memmodel); - if (memmodel == MM_PLANAR) - stdvga_set_mode(stdvga_find_mode(0x6a), 0); - if (memmodel == MM_PACKED && !(flags & MF_NOPALETTE)) - stdvga_set_packed_palette(); - - dispi_write(VBE_DISPI_INDEX_BPP, GET_GLOBAL(vmode_g->depth)); - u16 width = GET_GLOBAL(vmode_g->width); - u16 height = GET_GLOBAL(vmode_g->height); - dispi_write(VBE_DISPI_INDEX_XRES, width); - dispi_write(VBE_DISPI_INDEX_YRES, height); - dispi_write(VBE_DISPI_INDEX_BANK, 0); - u16 bf = ((flags & MF_NOCLEARMEM ? VBE_DISPI_NOCLEARMEM : 0) - | (flags & MF_LINEARFB ? VBE_DISPI_LFB_ENABLED : 0)); - dispi_write(VBE_DISPI_INDEX_ENABLE, VBE_DISPI_ENABLED | bf); - - /* VGA compat setup */ - u16 crtc_addr = VGAREG_VGA_CRTC_ADDRESS; - stdvga_crtc_write(crtc_addr, 0x11, 0x00); - stdvga_crtc_write(crtc_addr, 0x01, width / 8 - 1); - stdvga_set_linelength(vmode_g, width); - stdvga_crtc_write(crtc_addr, 0x12, height - 1); - u8 v = 0; - if ((height - 1) & 0x0100) - v |= 0x02; - if ((height - 1) & 0x0200) - v |= 0x40; - stdvga_crtc_mask(crtc_addr, 0x07, 0x42, v); - - stdvga_crtc_write(crtc_addr, 0x09, 0x00); - stdvga_crtc_mask(crtc_addr, 0x17, 0x00, 0x03); - stdvga_attr_mask(0x10, 0x00, 0x01); - stdvga_grdc_write(0x06, 0x05); - stdvga_sequ_write(0x02, 0x0f); - if (memmodel != MM_PLANAR) { - stdvga_crtc_mask(crtc_addr, 0x14, 0x00, 0x40); - stdvga_attr_mask(0x10, 0x00, 0x40); - stdvga_sequ_mask(0x04, 0x00, 0x08); - stdvga_grdc_mask(0x05, 0x20, 0x40); - } - stdvga_attrindex_write(0x20); - - return 0; -} - - -/**************************************************************** - * Init - ****************************************************************/ - -int -bochsvga_setup(void) -{ - int ret = stdvga_setup(); - if (ret) - return ret; - - /* Sanity checks */ - dispi_write(VBE_DISPI_INDEX_ID, VBE_DISPI_ID0); - if (dispi_read(VBE_DISPI_INDEX_ID) != VBE_DISPI_ID0) { - dprintf(1, "No VBE DISPI interface detected, falling back to stdvga\n"); - return 0; - } - - dispi_write(VBE_DISPI_INDEX_ID, VBE_DISPI_ID5); - SET_VGA(dispi_found, 1); - - if (GET_GLOBAL(HaveRunInit)) - return 0; - - u32 lfb_addr = VBE_DISPI_LFB_PHYSICAL_ADDRESS; - u32 io_addr = 0; - int bdf = GET_GLOBAL(VgaBDF); - if (CONFIG_VGA_PCI && bdf >= 0) { - u16 vendor = pci_config_readw(bdf, PCI_VENDOR_ID); - int barid, bar; - switch (vendor) { - case 0x15ad: /* qemu vmware vga */ - barid = 1; - break; - case 0x1234: /* stdvga */ - bar = pci_config_readl(bdf, PCI_BASE_ADDRESS_2); - io_addr = bar & PCI_BASE_ADDRESS_IO_MASK; - barid = 0; - break; - default: /* qxl, virtio */ - barid = 0; - break; - } - bar = pci_config_readl(bdf, PCI_BASE_ADDRESS_0 + barid * 4); - lfb_addr = bar & PCI_BASE_ADDRESS_MEM_MASK; - dprintf(1, "VBE DISPI: bdf %02x:%02x.%x, bar %d\n", pci_bdf_to_bus(bdf) - , pci_bdf_to_dev(bdf), pci_bdf_to_fn(bdf), barid); - } - - SET_VGA(VBE_framebuffer, lfb_addr); - u32 totalmem = dispi_read(VBE_DISPI_INDEX_VIDEO_MEMORY_64K) * 64 * 1024; - SET_VGA(VBE_total_memory, totalmem); - SET_VGA(VBE_win_granularity, 64); - SET_VGA(VBE_capabilities, VBE_CAPABILITY_8BIT_DAC); - - dprintf(1, "VBE DISPI: lfb_addr=%x, size %d MB\n", - lfb_addr, totalmem >> 20); - - // Validate modes - u16 en = dispi_read(VBE_DISPI_INDEX_ENABLE); - dispi_write(VBE_DISPI_INDEX_ENABLE, en | VBE_DISPI_GETCAPS); - u16 max_xres = dispi_read(VBE_DISPI_INDEX_XRES); - u16 max_bpp = dispi_read(VBE_DISPI_INDEX_BPP); - dispi_write(VBE_DISPI_INDEX_ENABLE, en); - struct generic_svga_mode *m = svga_modes; - unsigned int mcount = GET_GLOBAL(svga_mcount); - for (; m < &svga_modes[mcount]; m++) { - u16 width = GET_GLOBAL(m->info.width); - u16 height = GET_GLOBAL(m->info.height); - u8 depth = GET_GLOBAL(m->info.depth); - u32 mem = (height * DIV_ROUND_UP(width * vga_bpp(&m->info), 8) - * stdvga_vram_ratio(&m->info)); - - if (width > max_xres || depth > max_bpp || mem > totalmem) { - dprintf(1, "Removing mode %x\n", GET_GLOBAL(m->mode)); - SET_VGA(m->mode, 0xffff); - } - } - - if (io_addr) { - int i; - u8 *edid = (void*)(io_addr); - for (i = 0; i < sizeof(VBE_edid); i++) - SET_VGA(VBE_edid[i], readb(edid + i)); - } - - return 0; -} diff --git a/payloads/external/SeaBIOS/vgasrc/bochsvga.h b/payloads/external/SeaBIOS/vgasrc/bochsvga.h deleted file mode 100644 index ae5f75db..00000000 --- a/payloads/external/SeaBIOS/vgasrc/bochsvga.h +++ /dev/null @@ -1,57 +0,0 @@ -#ifndef __BOCHSVGA_H -#define __BOCHSVGA_H - -#include "types.h" // u8 - -#define VBE_DISPI_BANK_ADDRESS 0xA0000 -#define VBE_DISPI_BANK_SIZE_KB 64 - -#define VBE_DISPI_MAX_XRES 2560 -#define VBE_DISPI_MAX_YRES 1600 - -#define VBE_DISPI_IOPORT_INDEX 0x01CE -#define VBE_DISPI_IOPORT_DATA 0x01CF - -#define VBE_DISPI_INDEX_ID 0x0 -#define VBE_DISPI_INDEX_XRES 0x1 -#define VBE_DISPI_INDEX_YRES 0x2 -#define VBE_DISPI_INDEX_BPP 0x3 -#define VBE_DISPI_INDEX_ENABLE 0x4 -#define VBE_DISPI_INDEX_BANK 0x5 -#define VBE_DISPI_INDEX_VIRT_WIDTH 0x6 -#define VBE_DISPI_INDEX_VIRT_HEIGHT 0x7 -#define VBE_DISPI_INDEX_X_OFFSET 0x8 -#define VBE_DISPI_INDEX_Y_OFFSET 0x9 -#define VBE_DISPI_INDEX_VIDEO_MEMORY_64K 0xa - -#define VBE_DISPI_ID0 0xB0C0 -#define VBE_DISPI_ID1 0xB0C1 -#define VBE_DISPI_ID2 0xB0C2 -#define VBE_DISPI_ID3 0xB0C3 -#define VBE_DISPI_ID4 0xB0C4 -#define VBE_DISPI_ID5 0xB0C5 - -#define VBE_DISPI_DISABLED 0x00 -#define VBE_DISPI_ENABLED 0x01 -#define VBE_DISPI_GETCAPS 0x02 -#define VBE_DISPI_8BIT_DAC 0x20 -#define VBE_DISPI_LFB_ENABLED 0x40 -#define VBE_DISPI_NOCLEARMEM 0x80 - -#define VBE_DISPI_LFB_PHYSICAL_ADDRESS 0xE0000000 - -struct vgamode_s *bochsvga_find_mode(int mode); -void bochsvga_list_modes(u16 seg, u16 *dest, u16 *last); -int bochsvga_get_window(struct vgamode_s *vmode_g, int window); -int bochsvga_set_window(struct vgamode_s *vmode_g, int window, int val); -int bochsvga_get_linelength(struct vgamode_s *vmode_g); -int bochsvga_set_linelength(struct vgamode_s *vmode_g, int val); -int bochsvga_get_displaystart(struct vgamode_s *vmode_g); -int bochsvga_set_displaystart(struct vgamode_s *vmode_g, int val); -int bochsvga_get_dacformat(struct vgamode_s *vmode_g); -int bochsvga_set_dacformat(struct vgamode_s *vmode_g, int val); -int bochsvga_save_restore(int cmd, u16 seg, void *data); -int bochsvga_set_mode(struct vgamode_s *vmode_g, int flags); -int bochsvga_setup(void); - -#endif // bochsvga.h diff --git a/payloads/external/SeaBIOS/vgasrc/cbvga.c b/payloads/external/SeaBIOS/vgasrc/cbvga.c deleted file mode 100644 index b919137b..00000000 --- a/payloads/external/SeaBIOS/vgasrc/cbvga.c +++ /dev/null @@ -1,275 +0,0 @@ -// Simple framebuffer vgabios for use with coreboot native vga init. -// -// Copyright (C) 2014 Kevin O'Connor <kevin@koconnor.net> -// Copyright (C) 2017 Patrick Rudolph <siro@das-labor.org> -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "biosvar.h" // GET_BDA -#include "output.h" // dprintf -#include "stdvga.h" // SEG_CTEXT -#include "string.h" // memset16_far -#include "util.h" // find_cb_table -#include "vgabios.h" // SET_VGA -#include "vgafb.h" // handle_gfx_op -#include "vgautil.h" // VBE_total_memory -#include "svgamodes.h" // svga_modes - -static int CBmode VAR16; -static struct vgamode_s CBmodeinfo VAR16; -static struct vgamode_s CBemulinfo VAR16; -static u32 CBlinelength VAR16; - -struct vgamode_s *cbvga_find_mode(int mode) -{ - if (mode == GET_GLOBAL(CBmode)) - return &CBmodeinfo; - if (mode == 0x03) - return &CBemulinfo; - - int i; - for (i = 0; i < GET_GLOBAL(svga_mcount); i++) { - struct generic_svga_mode *cbmode_g = &svga_modes[i]; - if (GET_GLOBAL(cbmode_g->mode) == 0xffff) - continue; - if (GET_GLOBAL(cbmode_g->mode) == mode) - return &cbmode_g->info; - } - return NULL; -} - -void -cbvga_list_modes(u16 seg, u16 *dest, u16 *last) -{ - int seen = 0; - - if (GET_GLOBAL(CBmode) != 0x3) { - /* Advertise additional SVGA modes for Microsoft NTLDR graphical mode. - * Microsoft NTLDR: - * + Graphical mode uses a maximum resolution of 1600x1200. - * + Expects to find VESA mode with 800x600 or 1024x768. - * + 24 Bpp and 32 Bpp are supported - */ - int i; - for (i = 0; i < GET_GLOBAL(svga_mcount) && dest < last; i++) { - struct generic_svga_mode *cbmode_g = &svga_modes[i]; - u16 mode = GET_GLOBAL(cbmode_g->mode); - if (mode == 0xffff) - continue; - SET_FARVAR(seg, *dest, mode); - dest++; - if (GET_GLOBAL(CBmode) == mode) - seen = 1; - } - } - if (dest < last && !seen) { - SET_FARVAR(seg, *dest, GET_GLOBAL(CBmode)); - dest++; - } - SET_FARVAR(seg, *dest, 0xffff); -} - -int -cbvga_get_window(struct vgamode_s *vmode_g, int window) -{ - return -1; -} - -int -cbvga_set_window(struct vgamode_s *vmode_g, int window, int val) -{ - return -1; -} - -int -cbvga_get_linelength(struct vgamode_s *vmode_g) -{ - return GET_GLOBAL(CBlinelength); -} - -int -cbvga_set_linelength(struct vgamode_s *vmode_g, int val) -{ - return -1; -} - -int -cbvga_get_displaystart(struct vgamode_s *vmode_g) -{ - return 0; -} - -int -cbvga_set_displaystart(struct vgamode_s *vmode_g, int val) -{ - return -1; -} - -int -cbvga_get_dacformat(struct vgamode_s *vmode_g) -{ - return -1; -} - -int -cbvga_set_dacformat(struct vgamode_s *vmode_g, int val) -{ - return -1; -} - -int -cbvga_save_restore(int cmd, u16 seg, void *data) -{ - if (cmd & (SR_HARDWARE|SR_DAC|SR_REGISTERS)) - return -1; - return bda_save_restore(cmd, seg, data); -} - -int -cbvga_set_mode(struct vgamode_s *vmode_g, int flags) -{ - u8 emul = vmode_g == &CBemulinfo || GET_GLOBAL(CBmode) == 0x03; - /* - * The extra_stack flag is false when running in windows x86 - * emulator, to avoid stack switching triggering bugs. Using the - * same flag here to skip screen clearing, because the windows - * emulator seems to have problems to handle the int 1587 call - * too, and GO_MEMSET uses that. - */ - u8 extra_stack = GET_BDA_EXT(flags) & BF_EXTRA_STACK; - MASK_BDA_EXT(flags, BF_EMULATE_TEXT, emul ? BF_EMULATE_TEXT : 0); - if (!(flags & MF_NOCLEARMEM)) { - if (GET_GLOBAL(CBmodeinfo.memmodel) == MM_TEXT) { - memset16_far(SEG_CTEXT, (void*)0, 0x0720, 80*25*2); - return 0; - } - if (extra_stack || flags & MF_LEGACY) { - struct gfx_op op; - init_gfx_op(&op, &CBmodeinfo); - op.x = op.y = 0; - op.xlen = GET_GLOBAL(CBmodeinfo.width); - op.ylen = GET_GLOBAL(CBmodeinfo.height); - op.op = GO_MEMSET; - handle_gfx_op(&op); - } - } - return 0; -} - -int -cbvga_get_linesize(struct vgamode_s *vmode_g) -{ - /* Can't change mode, always report active pitch. */ - return GET_GLOBAL(CBlinelength); -} - -#define CB_TAG_FRAMEBUFFER 0x0012 -struct cb_framebuffer { - u32 tag; - u32 size; - - u64 physical_address; - u32 x_resolution; - u32 y_resolution; - u32 bytes_per_line; - u8 bits_per_pixel; - u8 red_mask_pos; - u8 red_mask_size; - u8 green_mask_pos; - u8 green_mask_size; - u8 blue_mask_pos; - u8 blue_mask_size; - u8 reserved_mask_pos; - u8 reserved_mask_size; -}; - -void -cbvga_setup_modes(u64 addr, u8 bpp, u32 xlines, u32 ylines, u32 linelength) -{ - int i; - - SET_VGA(CBmode, 0x140); - SET_VGA(VBE_framebuffer, addr); - SET_VGA(VBE_total_memory, linelength * ylines); - SET_VGA(CBlinelength, linelength); - SET_VGA(CBmodeinfo.memmodel, MM_DIRECT); - SET_VGA(CBmodeinfo.width, xlines); - SET_VGA(CBmodeinfo.height, ylines); - SET_VGA(CBmodeinfo.depth, bpp); - SET_VGA(CBmodeinfo.cwidth, 8); - SET_VGA(CBmodeinfo.cheight, 16); - memcpy_far(get_global_seg(), &CBemulinfo - , get_global_seg(), &CBmodeinfo, sizeof(CBemulinfo)); - - // Validate modes - for (i = 0; i < GET_GLOBAL(svga_mcount); i++) { - struct generic_svga_mode *cbmode_g = &svga_modes[i]; - /* Skip VBE modes that doesn't fit into coreboot's framebuffer */ - if ((GET_GLOBAL(cbmode_g->info.memmodel) != MM_DIRECT) - || (GET_GLOBAL(cbmode_g->info.height) > ylines) - || (GET_GLOBAL(cbmode_g->info.width) > xlines) - || (GET_GLOBAL(cbmode_g->info.depth) != bpp)) { - dprintf(3, "Removing mode %x\n", GET_GLOBAL(cbmode_g->mode)); - SET_VGA(cbmode_g->mode, 0xffff); - } - if ((GET_GLOBAL(cbmode_g->info.height) == ylines) - && (GET_GLOBAL(cbmode_g->info.width) == xlines) - && (GET_GLOBAL(cbmode_g->info.depth) == bpp)) { - SET_VGA(CBmode, GET_GLOBAL(cbmode_g->mode)); - } - } -} - -int -cbvga_setup(void) -{ - dprintf(1, "coreboot vga init\n"); - - if (GET_GLOBAL(HaveRunInit)) - return 0; - - struct cb_header *cbh = find_cb_table(); - if (!cbh) { - dprintf(1, "Unable to find coreboot table\n"); - return -1; - } - struct cb_framebuffer *cbfb = find_cb_subtable(cbh, CB_TAG_FRAMEBUFFER); - if (!cbfb) { - // Assume there is an EGA text framebuffer. - dprintf(1, "Did not find coreboot framebuffer - assuming EGA text\n"); - SET_VGA(CBmode, 0x03); - SET_VGA(CBlinelength, 80*2); - SET_VGA(CBmodeinfo.memmodel, MM_TEXT); - SET_VGA(CBmodeinfo.width, 80); - SET_VGA(CBmodeinfo.height, 25); - SET_VGA(CBmodeinfo.depth, 4); - SET_VGA(CBmodeinfo.cwidth, 9); - SET_VGA(CBmodeinfo.cheight, 16); - SET_VGA(CBmodeinfo.sstart, SEG_CTEXT); - return 0; - } - - u64 addr = GET_FARVAR(0, cbfb->physical_address); - u8 bpp = GET_FARVAR(0, cbfb->blue_mask_size) - + GET_FARVAR(0, cbfb->green_mask_size) - + GET_FARVAR(0, cbfb->red_mask_size) - + GET_FARVAR(0, cbfb->reserved_mask_size); - u32 xlines = GET_FARVAR(0, cbfb->x_resolution); - u32 ylines = GET_FARVAR(0, cbfb->y_resolution); - u32 linelength = GET_FARVAR(0, cbfb->bytes_per_line); - //fall back to coreboot reported bpp if calculated value invalid - if (bpp != 15 && bpp != 16 && bpp != 24 && bpp != 32) - bpp = GET_FARVAR(0, cbfb->bits_per_pixel); - - dprintf(1, "Found FB @ %llx %dx%d with %d bpp (%d stride)\n" - , addr, xlines, ylines, bpp, linelength); - - if (!addr || addr > 0xffffffff - || (bpp != 15 && bpp != 16 && bpp != 24 && bpp != 32)) { - dprintf(1, "Unable to use FB\n"); - return -1; - } - - cbvga_setup_modes(addr, bpp, xlines, ylines, linelength); - return 0; -} diff --git a/payloads/external/SeaBIOS/vgasrc/clext.c b/payloads/external/SeaBIOS/vgasrc/clext.c deleted file mode 100644 index da8b790d..00000000 --- a/payloads/external/SeaBIOS/vgasrc/clext.c +++ /dev/null @@ -1,627 +0,0 @@ -// QEMU Cirrus CLGD 54xx VGABIOS Extension. -// -// Copyright (C) 2009 Kevin O'Connor <kevin@koconnor.net> -// Copyright (c) 2004 Makoto Suzuki (suzu) -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "biosvar.h" // GET_GLOBAL -#include "bregs.h" // struct bregs -#include "hw/pci.h" // pci_config_readl -#include "hw/pci_regs.h" // PCI_BASE_ADDRESS_0 -#include "output.h" // dprintf -#include "stdvga.h" // VGAREG_SEQU_ADDRESS -#include "string.h" // memset16_far -#include "vgabios.h" // SET_VGA -#include "vgautil.h" // VBE_total_memory - - -/**************************************************************** - * Cirrus mode tables - ****************************************************************/ - -/* VGA */ -static u16 cseq_vga[] VAR16 = {0x0007,0xffff}; -static u16 cgraph_vga[] VAR16 = {0x0009,0x000a,0x000b,0xffff}; -static u16 ccrtc_vga[] VAR16 = {0x001a,0x001b,0x001d,0xffff}; - -/* extensions */ -static u16 cgraph_svgacolor[] VAR16 = { - 0x0000,0x0001,0x0002,0x0003,0x0004,0x4005,0x0506,0x0f07,0xff08, - 0x0009,0x000a,0x000b, - 0xffff -}; -/* 640x480x8 */ -static u16 cseq_640x480x8[] VAR16 = { - 0x0300,0x2101,0x0f02,0x0003,0x0e04,0x1107, - 0x580b,0x580c,0x580d,0x580e, - 0x0412,0x0013,0x2017, - 0x331b,0x331c,0x331d,0x331e, - 0xffff -}; -static u16 ccrtc_640x480x8[] VAR16 = { - 0x2c11, - 0x5f00,0x4f01,0x4f02,0x8003,0x5204,0x1e05,0x0b06,0x3e07, - 0x4009,0x000c,0x000d, - 0xea10,0xdf12,0x5013,0x4014,0xdf15,0x0b16,0xc317,0xff18, - 0x001a,0x221b,0x001d, - 0xffff -}; -/* 640x480x16 */ -static u16 cseq_640x480x16[] VAR16 = { - 0x0300,0x2101,0x0f02,0x0003,0x0e04,0x1707, - 0x580b,0x580c,0x580d,0x580e, - 0x0412,0x0013,0x2017, - 0x331b,0x331c,0x331d,0x331e, - 0xffff -}; -static u16 ccrtc_640x480x16[] VAR16 = { - 0x2c11, - 0x5f00,0x4f01,0x4f02,0x8003,0x5204,0x1e05,0x0b06,0x3e07, - 0x4009,0x000c,0x000d, - 0xea10,0xdf12,0xa013,0x4014,0xdf15,0x0b16,0xc317,0xff18, - 0x001a,0x221b,0x001d, - 0xffff -}; -/* 640x480x24 */ -static u16 cseq_640x480x24[] VAR16 = { - 0x0300,0x2101,0x0f02,0x0003,0x0e04,0x1507, - 0x580b,0x580c,0x580d,0x580e, - 0x0412,0x0013,0x2017, - 0x331b,0x331c,0x331d,0x331e, - 0xffff -}; -static u16 ccrtc_640x480x24[] VAR16 = { - 0x2c11, - 0x5f00,0x4f01,0x4f02,0x8003,0x5204,0x1e05,0x0b06,0x3e07, - 0x4009,0x000c,0x000d, - 0xea10,0xdf12,0xf013,0x4014,0xdf15,0x0b16,0xc317,0xff18, - 0x001a,0x221b,0x001d, - 0xffff -}; -/* 800x600x8 */ -static u16 cseq_800x600x8[] VAR16 = { - 0x0300,0x2101,0x0f02,0x0003,0x0e04,0x1107, - 0x230b,0x230c,0x230d,0x230e, - 0x0412,0x0013,0x2017, - 0x141b,0x141c,0x141d,0x141e, - 0xffff -}; -static u16 ccrtc_800x600x8[] VAR16 = { - 0x2311,0x7d00,0x6301,0x6302,0x8003,0x6b04,0x1a05,0x9806,0xf007, - 0x6009,0x000c,0x000d, - 0x7d10,0x5712,0x6413,0x4014,0x5715,0x9816,0xc317,0xff18, - 0x001a,0x221b,0x001d, - 0xffff -}; -/* 800x600x16 */ -static u16 cseq_800x600x16[] VAR16 = { - 0x0300,0x2101,0x0f02,0x0003,0x0e04,0x1707, - 0x230b,0x230c,0x230d,0x230e, - 0x0412,0x0013,0x2017, - 0x141b,0x141c,0x141d,0x141e, - 0xffff -}; -static u16 ccrtc_800x600x16[] VAR16 = { - 0x2311,0x7d00,0x6301,0x6302,0x8003,0x6b04,0x1a05,0x9806,0xf007, - 0x6009,0x000c,0x000d, - 0x7d10,0x5712,0xc813,0x4014,0x5715,0x9816,0xc317,0xff18, - 0x001a,0x221b,0x001d, - 0xffff -}; -/* 800x600x24 */ -static u16 cseq_800x600x24[] VAR16 = { - 0x0300,0x2101,0x0f02,0x0003,0x0e04,0x1507, - 0x230b,0x230c,0x230d,0x230e, - 0x0412,0x0013,0x2017, - 0x141b,0x141c,0x141d,0x141e, - 0xffff -}; -static u16 ccrtc_800x600x24[] VAR16 = { - 0x2311,0x7d00,0x6301,0x6302,0x8003,0x6b04,0x1a05,0x9806,0xf007, - 0x6009,0x000c,0x000d, - 0x7d10,0x5712,0x2c13,0x4014,0x5715,0x9816,0xc317,0xff18, - 0x001a,0x321b,0x001d, - 0xffff -}; -/* 1024x768x8 */ -static u16 cseq_1024x768x8[] VAR16 = { - 0x0300,0x2101,0x0f02,0x0003,0x0e04,0x1107, - 0x760b,0x760c,0x760d,0x760e, - 0x0412,0x0013,0x2017, - 0x341b,0x341c,0x341d,0x341e, - 0xffff -}; -static u16 ccrtc_1024x768x8[] VAR16 = { - 0x2911,0xa300,0x7f01,0x7f02,0x8603,0x8304,0x9405,0x2406,0xf507, - 0x6009,0x000c,0x000d, - 0x0310,0xff12,0x8013,0x4014,0xff15,0x2416,0xc317,0xff18, - 0x001a,0x221b,0x001d, - 0xffff -}; -/* 1024x768x16 */ -static u16 cseq_1024x768x16[] VAR16 = { - 0x0300,0x2101,0x0f02,0x0003,0x0e04,0x1707, - 0x760b,0x760c,0x760d,0x760e, - 0x0412,0x0013,0x2017, - 0x341b,0x341c,0x341d,0x341e, - 0xffff -}; -static u16 ccrtc_1024x768x16[] VAR16 = { - 0x2911,0xa300,0x7f01,0x7f02,0x8603,0x8304,0x9405,0x2406,0xf507, - 0x6009,0x000c,0x000d, - 0x0310,0xff12,0x0013,0x4014,0xff15,0x2416,0xc317,0xff18, - 0x001a,0x321b,0x001d, - 0xffff -}; -/* 1024x768x24 */ -static u16 cseq_1024x768x24[] VAR16 = { - 0x0300,0x2101,0x0f02,0x0003,0x0e04,0x1507, - 0x760b,0x760c,0x760d,0x760e, - 0x0412,0x0013,0x2017, - 0x341b,0x341c,0x341d,0x341e, - 0xffff -}; -static u16 ccrtc_1024x768x24[] VAR16 = { - 0x2911,0xa300,0x7f01,0x7f02,0x8603,0x8304,0x9405,0x2406,0xf507, - 0x6009,0x000c,0x000d, - 0x0310,0xff12,0x8013,0x4014,0xff15,0x2416,0xc317,0xff18, - 0x001a,0x321b,0x001d, - 0xffff -}; -/* 1280x1024x8 */ -static u16 cseq_1280x1024x8[] VAR16 = { - 0x0300,0x2101,0x0f02,0x0003,0x0e04,0x1107, - 0x760b,0x760c,0x760d,0x760e, - 0x0412,0x0013,0x2017, - 0x341b,0x341c,0x341d,0x341e, - 0xffff -}; -static u16 ccrtc_1280x1024x8[] VAR16 = { - 0x2911,0xc300,0x9f01,0x9f02,0x8603,0x8304,0x9405,0x2406,0xf707, - 0x6009,0x000c,0x000d, - 0x0310,0xff12,0xa013,0x4014,0xff15,0x2416,0xc317,0xff18, - 0x001a,0x221b,0x001d, - 0xffff -}; -/* 1280x1024x16 */ -static u16 cseq_1280x1024x16[] VAR16 = { - 0x0300,0x2101,0x0f02,0x0003,0x0e04,0x1707, - 0x760b,0x760c,0x760d,0x760e, - 0x0412,0x0013,0x2017, - 0x341b,0x341c,0x341d,0x341e, - 0xffff -}; -static u16 ccrtc_1280x1024x16[] VAR16 = { - 0x2911,0xc300,0x9f01,0x9f02,0x8603,0x8304,0x9405,0x2406,0xf707, - 0x6009,0x000c,0x000d, - 0x0310,0xff12,0x4013,0x4014,0xff15,0x2416,0xc317,0xff18, - 0x001a,0x321b,0x001d, - 0xffff -}; - -/* 1600x1200x8 */ -static u16 cseq_1600x1200x8[] VAR16 = { - 0x0300,0x2101,0x0f02,0x0003,0x0e04,0x1107, - 0x760b,0x760c,0x760d,0x760e, - 0x0412,0x0013,0x2017, - 0x341b,0x341c,0x341d,0x341e, - 0xffff -}; -static u16 ccrtc_1600x1200x8[] VAR16 = { - 0x2911,0xc300,0x9f01,0x9f02,0x8603,0x8304,0x9405,0x2406,0xf707, - 0x6009,0x000c,0x000d, - 0x0310,0xff12,0xc813,0x4014,0xff15,0x2416,0xc317,0xff18, - 0x001a,0x221b,0x001d, - 0xffff -}; - -struct cirrus_mode_s { - u16 mode, vesamode; - struct vgamode_s info; - - u16 hidden_dac; /* 0x3c6 */ - u16 *seq; /* 0x3c4 */ - u16 *graph; /* 0x3ce */ - u16 *crtc; /* 0x3d4 */ -}; - -static struct cirrus_mode_s cirrus_modes[] VAR16 = { - {0x5f,0x101,{MM_PACKED,640,480,8,8,16,SEG_GRAPH},0x00, - cseq_640x480x8,cgraph_svgacolor,ccrtc_640x480x8}, - {0x64,0x111,{MM_DIRECT,640,480,16,8,16,SEG_GRAPH},0xe1, - cseq_640x480x16,cgraph_svgacolor,ccrtc_640x480x16}, - {0x66,0x110,{MM_DIRECT,640,480,15,8,16,SEG_GRAPH},0xf0, - cseq_640x480x16,cgraph_svgacolor,ccrtc_640x480x16}, - {0x71,0x112,{MM_DIRECT,640,480,24,8,16,SEG_GRAPH},0xe5, - cseq_640x480x24,cgraph_svgacolor,ccrtc_640x480x24}, - - {0x5c,0x103,{MM_PACKED,800,600,8,8,16,SEG_GRAPH},0x00, - cseq_800x600x8,cgraph_svgacolor,ccrtc_800x600x8}, - {0x65,0x114,{MM_DIRECT,800,600,16,8,16,SEG_GRAPH},0xe1, - cseq_800x600x16,cgraph_svgacolor,ccrtc_800x600x16}, - {0x67,0x113,{MM_DIRECT,800,600,15,8,16,SEG_GRAPH},0xf0, - cseq_800x600x16,cgraph_svgacolor,ccrtc_800x600x16}, - - {0x60,0x105,{MM_PACKED,1024,768,8,8,16,SEG_GRAPH},0x00, - cseq_1024x768x8,cgraph_svgacolor,ccrtc_1024x768x8}, - {0x74,0x117,{MM_DIRECT,1024,768,16,8,16,SEG_GRAPH},0xe1, - cseq_1024x768x16,cgraph_svgacolor,ccrtc_1024x768x16}, - {0x68,0x116,{MM_DIRECT,1024,768,15,8,16,SEG_GRAPH},0xf0, - cseq_1024x768x16,cgraph_svgacolor,ccrtc_1024x768x16}, - - {0x78,0x115,{MM_DIRECT,800,600,24,8,16,SEG_GRAPH},0xe5, - cseq_800x600x24,cgraph_svgacolor,ccrtc_800x600x24}, - {0x79,0x118,{MM_DIRECT,1024,768,24,8,16,SEG_GRAPH},0xe5, - cseq_1024x768x24,cgraph_svgacolor,ccrtc_1024x768x24}, - - {0x6d,0x107,{MM_PACKED,1280,1024,8,8,16,SEG_GRAPH},0x00, - cseq_1280x1024x8,cgraph_svgacolor,ccrtc_1280x1024x8}, - {0x69,0x119,{MM_DIRECT,1280,1024,15,8,16,SEG_GRAPH},0xf0, - cseq_1280x1024x16,cgraph_svgacolor,ccrtc_1280x1024x16}, - {0x75,0x11a,{MM_DIRECT,1280,1024,16,8,16,SEG_GRAPH},0xe1, - cseq_1280x1024x16,cgraph_svgacolor,ccrtc_1280x1024x16}, - - {0x7b,0xffff,{MM_PACKED,1600,1200,8,8,16,SEG_GRAPH},0x00, - cseq_1600x1200x8,cgraph_svgacolor,ccrtc_1600x1200x8}, -}; - -static struct cirrus_mode_s mode_switchback VAR16 = - {0xfe,0xffff,{0xff},0,cseq_vga,cgraph_vga,ccrtc_vga}; - -int -is_cirrus_mode(struct vgamode_s *vmode_g) -{ - return (vmode_g >= &cirrus_modes[0].info - && vmode_g <= &cirrus_modes[ARRAY_SIZE(cirrus_modes)-1].info); -} - -struct vgamode_s * -clext_find_mode(int mode) -{ - struct cirrus_mode_s *table_g = cirrus_modes; - while (table_g < &cirrus_modes[ARRAY_SIZE(cirrus_modes)]) { - if (GET_GLOBAL(table_g->mode) == mode - || GET_GLOBAL(table_g->vesamode) == mode) - return &table_g->info; - table_g++; - } - return stdvga_find_mode(mode); -} - -void -clext_list_modes(u16 seg, u16 *dest, u16 *last) -{ - int i; - for (i=0; i<ARRAY_SIZE(cirrus_modes) && dest<last; i++) { - u16 mode = GET_GLOBAL(cirrus_modes[i].vesamode); - if (mode == 0xffff) - continue; - SET_FARVAR(seg, *dest, mode); - dest++; - } - stdvga_list_modes(seg, dest, last); -} - - -/**************************************************************** - * helper functions - ****************************************************************/ - -int -clext_get_window(struct vgamode_s *vmode_g, int window) -{ - return stdvga_grdc_read(window + 9); -} - -int -clext_set_window(struct vgamode_s *vmode_g, int window, int val) -{ - if (val >= 0x100) - return -1; - stdvga_grdc_write(window + 9, val); - return 0; -} - -int -clext_get_linelength(struct vgamode_s *vmode_g) -{ - u16 crtc_addr = stdvga_get_crtc(); - u8 reg13 = stdvga_crtc_read(crtc_addr, 0x13); - u8 reg1b = stdvga_crtc_read(crtc_addr, 0x1b); - return (((reg1b & 0x10) << 4) + reg13) * 8 / stdvga_vram_ratio(vmode_g); -} - -int -clext_set_linelength(struct vgamode_s *vmode_g, int val) -{ - u16 crtc_addr = stdvga_get_crtc(); - val = DIV_ROUND_UP(val * stdvga_vram_ratio(vmode_g), 8); - stdvga_crtc_write(crtc_addr, 0x13, val); - stdvga_crtc_mask(crtc_addr, 0x1b, 0x10, (val & 0x100) >> 4); - return 0; -} - -int -clext_get_displaystart(struct vgamode_s *vmode_g) -{ - u16 crtc_addr = stdvga_get_crtc(); - u8 b2 = stdvga_crtc_read(crtc_addr, 0x0c); - u8 b1 = stdvga_crtc_read(crtc_addr, 0x0d); - u8 b3 = stdvga_crtc_read(crtc_addr, 0x1b); - u8 b4 = stdvga_crtc_read(crtc_addr, 0x1d); - int val = (b1 | (b2<<8) | ((b3 & 0x01) << 16) | ((b3 & 0x0c) << 15) - | ((b4 & 0x80) << 12)); - return val * 4 / stdvga_vram_ratio(vmode_g); -} - -int -clext_set_displaystart(struct vgamode_s *vmode_g, int val) -{ - u16 crtc_addr = stdvga_get_crtc(); - val = val * stdvga_vram_ratio(vmode_g) / 4; - stdvga_crtc_write(crtc_addr, 0x0d, val); - stdvga_crtc_write(crtc_addr, 0x0c, val >> 8); - stdvga_crtc_mask(crtc_addr, 0x1d, 0x80, (val & 0x0800) >> 4); - stdvga_crtc_mask(crtc_addr, 0x1b, 0x0d - , ((val & 0x0100) >> 8) | ((val & 0x0600) >> 7)); - return 0; -} - -int -clext_save_restore(int cmd, u16 seg, void *data) -{ - if (cmd & SR_REGISTERS) - return -1; - return stdvga_save_restore(cmd, seg, data); -} - - -/**************************************************************** - * Mode setting - ****************************************************************/ - -static void -cirrus_switch_mode_setregs(u16 *data, u16 port) -{ - for (;;) { - u16 val = GET_GLOBAL(*data); - if (val == 0xffff) - return; - outw(val, port); - data++; - } -} - -static void -cirrus_switch_mode(struct cirrus_mode_s *table) -{ - // Unlock cirrus special - stdvga_sequ_write(0x06, 0x12); - cirrus_switch_mode_setregs(GET_GLOBAL(table->seq), VGAREG_SEQU_ADDRESS); - cirrus_switch_mode_setregs(GET_GLOBAL(table->graph), VGAREG_GRDC_ADDRESS); - cirrus_switch_mode_setregs(GET_GLOBAL(table->crtc), stdvga_get_crtc()); - - stdvga_pelmask_write(0x00); - stdvga_pelmask_read(); - stdvga_pelmask_read(); - stdvga_pelmask_read(); - stdvga_pelmask_read(); - stdvga_pelmask_write(GET_GLOBAL(table->hidden_dac)); - stdvga_pelmask_write(0xff); - - u8 memmodel = GET_GLOBAL(table->info.memmodel); - u8 on = 0; - if (memmodel == MM_PLANAR) - on = 0x41; - else if (memmodel != MM_TEXT) - on = 0x01; - stdvga_attr_mask(0x10, 0x01, on); - stdvga_attrindex_write(0x20); -} - -static void -cirrus_enable_16k_granularity(void) -{ - stdvga_grdc_mask(0x0b, 0x00, 0x20); -} - -static void -cirrus_clear_vram(u16 fill) -{ - cirrus_enable_16k_granularity(); - int count = GET_GLOBAL(VBE_total_memory) / (16 * 1024); - int i; - for (i=0; i<count; i++) { - stdvga_grdc_write(0x09, i); - memset16_far(SEG_GRAPH, 0, fill, 16 * 1024); - } - stdvga_grdc_write(0x09, 0x00); -} - -int -clext_set_mode(struct vgamode_s *vmode_g, int flags) -{ - if (!is_cirrus_mode(vmode_g)) { - cirrus_switch_mode(&mode_switchback); - dprintf(1, "cirrus mode switch regular\n"); - return stdvga_set_mode(vmode_g, flags); - } - struct cirrus_mode_s *table_g = container_of( - vmode_g, struct cirrus_mode_s, info); - cirrus_switch_mode(table_g); - if (GET_GLOBAL(vmode_g->memmodel) == MM_PACKED && !(flags & MF_NOPALETTE)) - stdvga_set_packed_palette(); - if (!(flags & MF_LINEARFB)) - cirrus_enable_16k_granularity(); - if (!(flags & MF_NOCLEARMEM)) - // fill with 0xff to keep win 2K happy - cirrus_clear_vram(flags & MF_LEGACY ? 0xffff : 0x0000); - return 0; -} - - -/**************************************************************** - * extbios - ****************************************************************/ - -static void -clext_101280(struct bregs *regs) -{ - u8 v = stdvga_crtc_read(stdvga_get_crtc(), 0x27); - if (v == 0xa0) - // 5430 - regs->ax = 0x0032; - else if (v == 0xb8) - // 5446 - regs->ax = 0x0039; - else - regs->ax = 0x00ff; - regs->bx = 0x00; - return; -} - -static void -clext_101281(struct bregs *regs) -{ - // XXX - regs->ax = 0x0100; -} - -static void -clext_101282(struct bregs *regs) -{ - regs->al = stdvga_crtc_read(stdvga_get_crtc(), 0x27) & 0x03; - regs->ah = 0xAF; -} - -static void -clext_101285(struct bregs *regs) -{ - regs->al = GET_GLOBAL(VBE_total_memory) / (64*1024); -} - -static void -clext_10129a(struct bregs *regs) -{ - regs->ax = 0x4060; - regs->cx = 0x1132; -} - -extern void a0h_callback(void); -ASM16( - // fatal: not implemented yet - "a0h_callback:" - "cli\n" - "hlt\n" - "lretw"); - -static void -clext_1012a0(struct bregs *regs) -{ - struct vgamode_s *table_g = clext_find_mode(regs->al & 0x7f); - regs->ah = (table_g ? 1 : 0); - regs->bx = (u32)a0h_callback; - regs->ds = regs->si = regs->es = regs->di = 0xffff; -} - -static void -clext_1012a1(struct bregs *regs) -{ - regs->bx = 0x0e00; // IBM 8512/8513, color -} - -static void -clext_1012a2(struct bregs *regs) -{ - regs->al = 0x07; // HSync 31.5 - 64.0 kHz -} - -static void -clext_1012ae(struct bregs *regs) -{ - regs->al = 0x01; // High Refresh 75Hz -} - -static void -clext_1012XX(struct bregs *regs) -{ - debug_stub(regs); -} - -void -clext_1012(struct bregs *regs) -{ - switch (regs->bl) { - case 0x80: clext_101280(regs); break; - case 0x81: clext_101281(regs); break; - case 0x82: clext_101282(regs); break; - case 0x85: clext_101285(regs); break; - case 0x9a: clext_10129a(regs); break; - case 0xa0: clext_1012a0(regs); break; - case 0xa1: clext_1012a1(regs); break; - case 0xa2: clext_1012a2(regs); break; - case 0xae: clext_1012ae(regs); break; - default: clext_1012XX(regs); break; - } -} - - -/**************************************************************** - * init - ****************************************************************/ - -static int -cirrus_check(void) -{ - stdvga_sequ_write(0x06, 0x92); - return stdvga_sequ_read(0x06) == 0x12; -} - -static u8 -cirrus_get_memsize(void) -{ - // get DRAM band width - u8 v = stdvga_sequ_read(0x0f); - u8 x = (v >> 3) & 0x03; - if (x == 0x03 && v & 0x80) - // 4MB - return 0x40; - return 0x04 << x; -} - -int -clext_setup(void) -{ - int ret = stdvga_setup(); - if (ret) - return ret; - - dprintf(1, "cirrus init\n"); - if (! cirrus_check()) - return -1; - dprintf(1, "cirrus init 2\n"); - - // memory setup - stdvga_sequ_write(0x0a, stdvga_sequ_read(0x0f) & 0x18); - // set vga mode - stdvga_sequ_write(0x07, 0x00); - // reset bitblt - stdvga_grdc_write(0x31, 0x04); - stdvga_grdc_write(0x31, 0x00); - - if (GET_GLOBAL(HaveRunInit)) - return 0; - - u32 lfb_addr = 0; - int bdf = GET_GLOBAL(VgaBDF); - if (CONFIG_VGA_PCI && bdf >= 0) - lfb_addr = (pci_config_readl(bdf, PCI_BASE_ADDRESS_0) - & PCI_BASE_ADDRESS_MEM_MASK); - SET_VGA(VBE_framebuffer, lfb_addr); - u16 totalmem = cirrus_get_memsize(); - SET_VGA(VBE_total_memory, totalmem * 64 * 1024); - SET_VGA(VBE_win_granularity, 16); - - return 0; -} diff --git a/payloads/external/SeaBIOS/vgasrc/geodevga.c b/payloads/external/SeaBIOS/vgasrc/geodevga.c deleted file mode 100644 index a5a58cdb..00000000 --- a/payloads/external/SeaBIOS/vgasrc/geodevga.c +++ /dev/null @@ -1,434 +0,0 @@ -// Geode GX2/LX VGA functions -// -// Copyright (C) 2009 Chris Kindt -// -// Written for Google Summer of Code 2009 for the coreboot project -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "biosvar.h" // GET_BDA -#include "farptr.h" // SET_FARVAR -#include "geodevga.h" // geodevga_setup -#include "hw/pci.h" // pci_config_readl -#include "hw/pci_regs.h" // PCI_BASE_ADDRESS_0 -#include "output.h" // dprintf -#include "stdvga.h" // stdvga_crtc_write -#include "vgabios.h" // SET_VGA -#include "vgautil.h" // VBE_total_memory - - -/**************************************************************** -* MSR and High Mem access through VSA Virtual Register -****************************************************************/ - -static u64 geode_msr_read(u32 msrAddr) -{ - union u64_u32_u val; - asm __volatile__ ( - "movw $0x0AC1C, %%dx \n" - "movl $0xFC530007, %%eax \n" - "outl %%eax, %%dx \n" - "addb $2, %%dl \n" - "inw %%dx, %%ax \n" - : "=a" (val.lo), "=d"(val.hi) - : "c"(msrAddr) - : "cc" - ); - - dprintf(4, "%s(0x%08x) = 0x%08x-0x%08x\n" - , __func__, msrAddr, val.hi, val.lo); - return val.val; -} - -static void geode_msr_mask(u32 msrAddr, u64 off, u64 on) -{ - union u64_u32_u uand, uor; - uand.val = ~off; - uor.val = on; - - dprintf(4, "%s(0x%08x, 0x%016llx, 0x%016llx)\n" - , __func__, msrAddr, off, on); - - asm __volatile__ ( - "push %%eax \n" - "movw $0x0AC1C, %%dx \n" - "movl $0xFC530007, %%eax \n" - "outl %%eax, %%dx \n" - "addb $2, %%dl \n" - "pop %%eax \n" - "outw %%ax, %%dx \n" - : - : "c"(msrAddr), "S" (uand.hi), "D" (uand.lo), "b" (uor.hi), "a" (uor.lo) - : "%edx","cc" - ); -} - -static u32 geode_mem_read(u32 addr) -{ - u32 val; - asm __volatile__ ( - "movw $0x0AC1C, %%dx \n" - "movl $0xFC530001, %%eax \n" - "outl %%eax, %%dx \n" - "addb $2, %%dl \n" - "inw %%dx, %%ax \n" - : "=a" (val) - : "b"(addr) - : "cc" - ); - - return val; -} - -static void geode_mem_mask(u32 addr, u32 off, u32 or) -{ - asm __volatile__ ( - "movw $0x0AC1C, %%dx \n" - "movl $0xFC530001, %%eax \n" - "outl %%eax, %%dx \n" - "addb $2, %%dl \n" - "outw %%ax, %%dx \n" - : - : "b"(addr), "S" (~off), "D" (or) - : "%eax","cc" - ); -} - -#define VP_FP_START 0x400 - -static u32 GeodeFB VAR16; -static u32 GeodeDC VAR16; -static u32 GeodeVP VAR16; - -static u32 geode_dc_read(int reg) -{ - u32 val = geode_mem_read(GET_GLOBAL(GeodeDC) + reg); - dprintf(4, "%s(0x%08x) = 0x%08x\n" - , __func__, GET_GLOBAL(GeodeDC) + reg, val); - return val; -} - -static void geode_dc_write(int reg, u32 val) -{ - dprintf(4, "%s(0x%08x, 0x%08x)\n" - , __func__, GET_GLOBAL(GeodeDC) + reg, val); - geode_mem_mask(GET_GLOBAL(GeodeDC) + reg, ~0, val); -} - -static void geode_dc_mask(int reg, u32 off, u32 on) -{ - dprintf(4, "%s(0x%08x, 0x%08x, 0x%08x)\n" - , __func__, GET_GLOBAL(GeodeDC) + reg, off, on); - geode_mem_mask(GET_GLOBAL(GeodeDC) + reg, off, on); -} - -static u32 geode_vp_read(int reg) -{ - u32 val = geode_mem_read(GET_GLOBAL(GeodeVP) + reg); - dprintf(4, "%s(0x%08x) = 0x%08x\n" - , __func__, GET_GLOBAL(GeodeVP) + reg, val); - return val; -} - -static void geode_vp_write(int reg, u32 val) -{ - dprintf(4, "%s(0x%08x, 0x%08x)\n" - , __func__, GET_GLOBAL(GeodeVP) + reg, val); - geode_mem_mask(GET_GLOBAL(GeodeVP) + reg, ~0, val); -} - -static void geode_vp_mask(int reg, u32 off, u32 on) -{ - dprintf(4, "%s(0x%08x, 0x%08x, 0x%08x)\n" - , __func__, GET_GLOBAL(GeodeVP) + reg, off, on); - geode_mem_mask(GET_GLOBAL(GeodeVP) + reg, off, on); -} - -static u32 geode_fp_read(int reg) -{ - u32 val = geode_mem_read(GET_GLOBAL(GeodeVP) + VP_FP_START + reg); - dprintf(4, "%s(0x%08x) = 0x%08x\n" - , __func__, GET_GLOBAL(GeodeVP) + VP_FP_START + reg, val); - return val; -} - -static void geode_fp_write(int reg, u32 val) -{ - dprintf(4, "%s(0x%08x, 0x%08x)\n" - , __func__, GET_GLOBAL(GeodeVP) + VP_FP_START + reg, val); - geode_mem_mask(GET_GLOBAL(GeodeVP) + VP_FP_START + reg, ~0, val); -} - -/**************************************************************** - * Helper functions - ****************************************************************/ - -static int legacyio_check(void) -{ - int ret=0; - u64 val; - - if (CONFIG_VGA_GEODEGX2) - val = geode_msr_read(GLIU0_P2D_BM_4); - else - val = geode_msr_read(MSR_GLIU0_BASE4); - if ((val & 0xffffffff) != 0x0A0fffe0) - ret|=1; - - val = geode_msr_read(GLIU0_IOD_BM_0); - if ((val & 0xffffffff) != 0x3c0ffff0) - ret|=2; - - val = geode_msr_read(GLIU0_IOD_BM_1); - if ((val & 0xffffffff) != 0x3d0ffff0) - ret|=4; - - return ret; -} - -static u32 framebuffer_size(void) -{ - /* We use the P2D_R0 msr to read out the number of pages. - * One page has a size of 4k - * - * Bit Name Description - * 39:20 PMAX Physical Memory Address Max - * 19:0 PMIX Physical Memory Address Min - * - */ - u64 msr = geode_msr_read(GLIU0_P2D_RO); - - u32 pmax = (msr >> 20) & 0x000fffff; - u32 pmin = msr & 0x000fffff; - - u32 val = pmax - pmin; - val += 1; - - /* The page size is 4k */ - return (val << 12); -} - -/**************************************************************** -* Init Functions -****************************************************************/ - -static void geodevga_set_output_mode(void) -{ - u64 msr_addr; - u64 msr; - - /* set output to crt and RGB/YUV */ - if (CONFIG_VGA_GEODEGX2) - msr_addr = VP_MSR_CONFIG_GX2; - else - msr_addr = VP_MSR_CONFIG_LX; - - /* set output mode (RGB/YUV) */ - msr = geode_msr_read(msr_addr); - msr &= ~VP_MSR_CONFIG_FMT; // mask out FMT (bits 5:3) - - if (CONFIG_VGA_OUTPUT_PANEL || CONFIG_VGA_OUTPUT_CRT_PANEL) { - msr |= VP_MSR_CONFIG_FMT_FP; // flat panel - - if (CONFIG_VGA_OUTPUT_CRT_PANEL) { - msr |= VP_MSR_CONFIG_FPC; // simultaneous Flat Panel and CRT - dprintf(1, "output: simultaneous Flat Panel and CRT\n"); - } else { - msr &= ~VP_MSR_CONFIG_FPC; // no simultaneous Flat Panel and CRT - dprintf(1, "ouput: flat panel\n"); - } - } else { - msr |= VP_MSR_CONFIG_FMT_CRT; // CRT only - dprintf(1, "output: CRT\n"); - } - geode_msr_mask(msr_addr, ~msr, msr); -} - -/* Set up the dc (display controller) portion of the geodelx -* The dc provides hardware support for VGA graphics. -*/ -static void dc_setup(void) -{ - dprintf(2, "DC_SETUP\n"); - - geode_dc_write(DC_UNLOCK, DC_LOCK_UNLOCK); - - /* zero memory config */ - geode_dc_write(DC_FB_ST_OFFSET, 0x0); - geode_dc_write(DC_CB_ST_OFFSET, 0x0); - geode_dc_write(DC_CURS_ST_OFFSET, 0x0); - - geode_dc_mask(DC_DISPLAY_CFG, ~DC_CFG_MSK, DC_DISPLAY_CFG_GDEN|DC_DISPLAY_CFG_TRUP); - geode_dc_write(DC_GENERAL_CFG, DC_GENERAL_CFG_VGAE); - - geode_dc_write(DC_UNLOCK, DC_LOCK_LOCK); -} - -/* Setup the vp (video processor) portion of the geodelx -* Under VGA modes the vp was handled by softvg from inside VSA2. -* Without a softvg module, access is only available through a pci bar. -* The High Mem Access virtual register is used to configure the -* pci mmio bar from 16bit friendly io space. -*/ -static void vp_setup(void) -{ - dprintf(2,"VP_SETUP\n"); - - geodevga_set_output_mode(); - - /* Set mmio registers - * there may be some timing issues here, the reads seem - * to slow things down enough work reliably - */ - - u32 reg = geode_vp_read(VP_MISC); - dprintf(1,"VP_SETUP VP_MISC=0x%08x\n",reg); - geode_vp_write(VP_MISC, VP_DCFG_BYP_BOTH); - reg = geode_vp_read(VP_MISC); - dprintf(1,"VP_SETUP VP_MISC=0x%08x\n",reg); - - reg = geode_vp_read(VP_DCFG); - dprintf(1,"VP_SETUP VP_DCFG=0x%08x\n",reg); - geode_vp_mask(VP_DCFG, 0, VP_DCFG_CRT_EN|VP_DCFG_HSYNC_EN|VP_DCFG_VSYNC_EN|VP_DCFG_DAC_BL_EN|VP_DCFG_CRT_SKEW); - reg = geode_vp_read(VP_DCFG); - dprintf(1,"VP_SETUP VP_DCFG=0x%08x\n",reg); - - /* setup flat panel */ - if (CONFIG_VGA_OUTPUT_PANEL || CONFIG_VGA_OUTPUT_CRT_PANEL) { - u64 msr; - - dprintf(1, "Setting up flat panel\n"); - /* write timing register */ - geode_fp_write(FP_PT1, 0x0); - geode_fp_write(FP_PT2, FP_PT2_SCRC); - - /* set pad select for TFT/LVDS */ - msr = VP_MSR_PADSEL_TFT_SEL_HIGH; - msr = msr << 32; - msr |= VP_MSR_PADSEL_TFT_SEL_LOW; - geode_msr_mask(VP_MSR_PADSEL, ~msr, msr); - - /* turn the panel on (if it isn't already) */ - reg = geode_fp_read(FP_PM); - reg |= FP_PM_P; - geode_fp_write(FP_PM, reg); - } -} - -static u8 geode_crtc_01[] VAR16 = { - 0x2d, 0x27, 0x28, 0x90, 0x29, 0x8e, 0xbf, 0x1f, - 0x00, 0x4f, 0x0d, 0x0e, 0x00, 0x00, 0x00, 0x00, - 0x9b, 0x8d, 0x8f, 0x14, 0x1f, 0x97, 0xb9, 0xa3, - 0xff }; -static u8 geode_crtc_03[] VAR16 = { - 0x5f, 0x4f, 0x50, 0x82, 0x51, 0x9e, 0xbf, 0x1f, - 0x00, 0x4f, 0x0d, 0x0e, 0x00, 0x00, 0x00, 0x00, - 0x9b, 0x8d, 0x8f, 0x28, 0x1f, 0x97, 0xb9, 0xa3, - 0xff }; -static u8 geode_crtc_04[] VAR16 = { - 0x2d, 0x27, 0x28, 0x90, 0x29, 0x8e, 0xbf, 0x1f, - 0x00, 0xc1, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x9b, 0x8d, 0x8f, 0x14, 0x00, 0x97, 0xb9, 0xa2, - 0xff }; -static u8 geode_crtc_05[] VAR16 = { - 0x2d, 0x27, 0x28, 0x90, 0x29, 0x8e, 0xbf, 0x1f, - 0x00, 0xc1, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x9b, 0x8e, 0x8f, 0x14, 0x00, 0x97, 0xb9, 0xa2, - 0xff }; -static u8 geode_crtc_06[] VAR16 = { - 0x5f, 0x4f, 0x50, 0x82, 0x51, 0x9e, 0xbf, 0x1f, - 0x00, 0xc1, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x9b, 0x8d, 0x8f, 0x28, 0x00, 0x97, 0xb9, 0xc2, - 0xff }; -static u8 geode_crtc_07[] VAR16 = { - 0x5f, 0x4f, 0x50, 0x82, 0x51, 0x9e, 0xbf, 0x1f, - 0x00, 0x4f, 0x0d, 0x0e, 0x00, 0x00, 0x00, 0x00, - 0x9b, 0x8d, 0x8f, 0x28, 0x0f, 0x97, 0xb9, 0xa3, - 0xff }; -static u8 geode_crtc_0d[] VAR16 = { - 0x2d, 0x27, 0x28, 0x90, 0x29, 0x8e, 0xbf, 0x1f, - 0x00, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x9b, 0x8d, 0x8f, 0x14, 0x00, 0x97, 0xb9, 0xe3, - 0xff }; -static u8 geode_crtc_0e[] VAR16 = { - 0x5f, 0x4f, 0x50, 0x82, 0x51, 0x9e, 0xbf, 0x1f, - 0x00, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x9b, 0x8d, 0x8f, 0x28, 0x00, 0x97, 0xb9, 0xe3, - 0xff }; -static u8 geode_crtc_0f[] VAR16 = { - 0x5f, 0x4f, 0x50, 0x82, 0x51, 0x9e, 0xbf, 0x1f, - 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x83, 0x85, 0x5d, 0x28, 0x0f, 0x65, 0xb9, 0xe3, - 0xff }; -static u8 geode_crtc_11[] VAR16 = { - 0x5f, 0x4f, 0x50, 0x82, 0x51, 0x9e, 0x0b, 0x3e, - 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0xe9, 0x8b, 0xdf, 0x28, 0x00, 0xe7, 0x04, 0xe3, - 0xff }; -static u8 geode_crtc_13[] VAR16 = { - 0x5f, 0x4f, 0x50, 0x82, 0x51, 0x9e, 0xbf, 0x1f, - 0x00, 0x41, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x9b, 0x8d, 0x8f, 0x28, 0x40, 0x98, 0xb9, 0xa3, - 0xff }; - -int geodevga_setup(void) -{ - int ret = stdvga_setup(); - if (ret) - return ret; - - dprintf(1,"GEODEVGA_SETUP\n"); - - if ((ret=legacyio_check())) { - dprintf(1,"GEODEVGA_SETUP legacyio_check=0x%x\n",ret); - } - - // Updated timings from geode datasheets, table 6-53 in particular - static u8 *new_crtc[] VAR16 = { - geode_crtc_01, geode_crtc_01, geode_crtc_03, geode_crtc_03, - geode_crtc_04, geode_crtc_05, geode_crtc_06, geode_crtc_07, - 0, 0, 0, 0, 0, - geode_crtc_0d, geode_crtc_0e, geode_crtc_0f, geode_crtc_0f, - geode_crtc_11, geode_crtc_11, geode_crtc_13 }; - int i; - for (i=0; i<ARRAY_SIZE(new_crtc); i++) { - u8 *crtc = GET_GLOBAL(new_crtc[i]); - if (crtc) - stdvga_override_crtc(i, crtc); - } - - if (GET_GLOBAL(VgaBDF) < 0) - // Device should be at 00:01.1 - SET_VGA(VgaBDF, pci_to_bdf(0, 1, 1)); - - // setup geode struct which is used for register access - SET_VGA(GeodeFB, pci_config_readl(GET_GLOBAL(VgaBDF), PCI_BASE_ADDRESS_0)); - SET_VGA(GeodeDC, pci_config_readl(GET_GLOBAL(VgaBDF), PCI_BASE_ADDRESS_2)); - SET_VGA(GeodeVP, pci_config_readl(GET_GLOBAL(VgaBDF), PCI_BASE_ADDRESS_3)); - - dprintf(1, "fb addr: 0x%08x\n", GET_GLOBAL(GeodeFB)); - dprintf(1, "dc addr: 0x%08x\n", GET_GLOBAL(GeodeDC)); - dprintf(1, "vp addr: 0x%08x\n", GET_GLOBAL(GeodeVP)); - - /* setup framebuffer */ - geode_dc_write(DC_UNLOCK, DC_LOCK_UNLOCK); - - /* read fb-bar from pci, then point dc to the fb base */ - u32 fb = GET_GLOBAL(GeodeFB); - if (geode_dc_read(DC_GLIU0_MEM_OFFSET) != fb) - geode_dc_write(DC_GLIU0_MEM_OFFSET, fb); - - geode_dc_write(DC_UNLOCK, DC_LOCK_LOCK); - - u32 fb_size = framebuffer_size(); // in byte - dprintf(1, "%d KB of video memory at 0x%08x\n", fb_size / 1024, fb); - - /* update VBE variables */ - SET_VGA(VBE_framebuffer, fb); - SET_VGA(VBE_total_memory, fb_size / 1024 / 64); // number of 64K blocks - - vp_setup(); - dc_setup(); - - return 0; -} diff --git a/payloads/external/SeaBIOS/vgasrc/geodevga.h b/payloads/external/SeaBIOS/vgasrc/geodevga.h deleted file mode 100644 index c99f54bb..00000000 --- a/payloads/external/SeaBIOS/vgasrc/geodevga.h +++ /dev/null @@ -1,89 +0,0 @@ -// Geode GX2/LX VGA functions -// -// Copyright (C) 2009 Chris Kindt -// -// Written for Google Summer of Code 2009 for the coreboot project -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#ifndef GEODEVGA_H -#define GEODEVGA_H - -#define VRC_INDEX 0xAC1C // Index register -#define VRC_DATA 0xAC1E // Data register -#define VR_UNLOCK 0xFC53 // Virtual register unlock code - -// Graphics-specific registers: -#define OEM_BAR0 0x50 -#define OEM_BAR1 0x54 -#define OEM_BAR2 0x58 -#define OEM_BAR3 0x5C - -#define DC_LOCK_LOCK 0x00000000 -#define DC_LOCK_UNLOCK 0x00004758 - -/* LX MSRs */ -#define MSR_GLIU0 (1 << 28) -#define MSR_GLIU0_BASE4 (MSR_GLIU0 + 0x23) /* LX */ -#define GLIU0_P2D_BM_4 (MSR_GLIU0 + 0x24) /* GX2 */ -#define GLIU0_P2D_RO (MSR_GLIU0 + 0x29) -#define GLIU0_IOD_BM_0 (MSR_GLIU0 + 0xE0) -#define GLIU0_IOD_BM_1 (MSR_GLIU0 + 0xE1) -#define DC_SPARE 0x80000011 -#define VP_MSR_CONFIG_GX2 0xc0002001 /* GX2 */ -#define VP_MSR_CONFIG_LX 0x48002001 /* LX */ -#define VP_MSR_PADSEL 0x48002011 - -#define VP_MSR_PADSEL_TFT_SEL_LOW 0xDFFFFFFF -#define VP_MSR_PADSEL_TFT_SEL_HIGH 0x0000003F - -/* VP_MSR_CONFIG bits */ -#define VP_MSR_CONFIG_FMT_CRT (0) -#define VP_MSR_CONFIG_FMT_FP (1 << 3) -#define VP_MSR_CONFIG_FPC (1 << 15) -#define VP_MSR_CONFIG_FMT ((1 << 3) | (1 << 4) | (1 << 5)) - - -/* DC REG OFFSET */ -#define DC_UNLOCK 0x0 -#define DC_GENERAL_CFG 0x4 -#define DC_DISPLAY_CFG 0x8 -#define DC_FB_ST_OFFSET 0x10 -#define DC_CB_ST_OFFSET 0x14 -#define DC_CURS_ST_OFFSET 0x18 -#define DC_GLIU0_MEM_OFFSET 0x84 - -/* VP REG OFFSET */ -#define VP_VCFG 0x0 -#define VP_DCFG 0x8 -#define VP_MISC 0x50 - -/* FP REG OFFSET */ -#define FP_PT1 0x00 -#define FP_PT2 0x08 -#define FP_PM 0x10 - - -/* DC bits */ -#define DC_GENERAL_CFG_VGAE (1 << 7) -#define DC_DISPLAY_CFG_GDEN (1 << 3) -#define DC_DISPLAY_CFG_TRUP (1 << 6) - -/* VP bits */ -#define VP_DCFG_CRT_EN (1 << 0) -#define VP_DCFG_HSYNC_EN (1 << 1) -#define VP_DCFG_VSYNC_EN (1 << 2) -#define VP_DCFG_DAC_BL_EN (1 << 3) -#define VP_DCFG_CRT_SKEW (1 << 16) -#define VP_DCFG_BYP_BOTH (1 << 0) - -/* FP bits */ -#define FP_PM_P (1 << 24) /* panel power ctl */ -#define FP_PT2_SCRC (1 << 27) /* panel shift clock retrace activity ctl */ - -/* Mask */ -#define DC_CFG_MSK 0xf000a6 - -int geodevga_setup(); - -#endif diff --git a/payloads/external/SeaBIOS/vgasrc/ramfb.c b/payloads/external/SeaBIOS/vgasrc/ramfb.c deleted file mode 100644 index 7efb11fb..00000000 --- a/payloads/external/SeaBIOS/vgasrc/ramfb.c +++ /dev/null @@ -1,169 +0,0 @@ -// Simple framebuffer vgabios for use with qemu ramfb device -// -// Copyright (C) 2019 Gerd Hoffmann <kraxel@redhat.com> -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "biosvar.h" // GET_BDA -#include "output.h" // dprintf -#include "string.h" // memset16_far -#include "vgautil.h" // VBE_total_memory -#include "std/pmm.h" // struct pmmheader -#include "byteorder.h" -#include "fw/paravirt.h" - -/* ---------------------------------------------------------------------- */ -/* minimal qemu fc_cfg support bits, requires dma support */ - -#define QEMU_CFG_FILE_DIR 0x19 - -struct QemuCfgFile { - u32 size; /* file size */ - u16 select; /* write this to 0x510 to read it */ - u16 reserved; - char name[56]; -}; - -static void -qemu_cfg_dma_transfer(void *address, u32 length, u32 control) -{ - QemuCfgDmaAccess access; - - if (length == 0) { - return; - } - - access.address = cpu_to_be64((u64)(u32)address); - access.length = cpu_to_be32(length); - access.control = cpu_to_be32(control); - - barrier(); - - outl(cpu_to_be32((u32)&access), PORT_QEMU_CFG_DMA_ADDR_LOW); - - while(be32_to_cpu(access.control) & ~QEMU_CFG_DMA_CTL_ERROR) - /* wait */; -} - -static void -qemu_cfg_read(void *buf, int len) -{ - qemu_cfg_dma_transfer(buf, len, QEMU_CFG_DMA_CTL_READ); -} - -static void -qemu_cfg_read_entry(void *buf, int e, int len) -{ - u32 control = (e << 16) | QEMU_CFG_DMA_CTL_SELECT - | QEMU_CFG_DMA_CTL_READ; - qemu_cfg_dma_transfer(buf, len, control); -} - -static void -qemu_cfg_write_entry(void *buf, int e, int len) -{ - u32 control = (e << 16) | QEMU_CFG_DMA_CTL_SELECT - | QEMU_CFG_DMA_CTL_WRITE; - qemu_cfg_dma_transfer(buf, len, control); -} - -static int -qemu_cfg_find_file(const char *filename) -{ - u32 count, e, select; - - qemu_cfg_read_entry(&count, QEMU_CFG_FILE_DIR, sizeof(count)); - count = be32_to_cpu(count); - for (select = 0, e = 0; e < count; e++) { - struct QemuCfgFile qfile; - qemu_cfg_read(&qfile, sizeof(qfile)); - if (memcmp_far(GET_SEG(SS), qfile.name, - GET_SEG(CS), filename, 10) == 0) - select = be16_to_cpu(qfile.select); - } - return select; -} - -/* ---------------------------------------------------------------------- */ - -#define FRAMEBUFFER_WIDTH 1024 -#define FRAMEBUFFER_HEIGHT 768 -#define FRAMEBUFFER_BPP 4 -#define FRAMEBUFFER_STRIDE (FRAMEBUFFER_BPP * FRAMEBUFFER_WIDTH) -#define FRAMEBUFFER_SIZE (FRAMEBUFFER_STRIDE * FRAMEBUFFER_HEIGHT) - -struct QemuRAMFBCfg { - u64 addr; - u32 fourcc; - u32 flags; - u32 width; - u32 height; - u32 stride; -}; - -#define fourcc_code(a, b, c, d) ((u32)(a) | ((u32)(b) << 8) | \ - ((u32)(c) << 16) | ((u32)(d) << 24)) - -#define DRM_FORMAT_RGB565 fourcc_code('R', 'G', '1', '6') /* [15:0] R:G:B 5:6:5 little endian */ -#define DRM_FORMAT_RGB888 fourcc_code('R', 'G', '2', '4') /* [23:0] R:G:B little endian */ -#define DRM_FORMAT_XRGB8888 fourcc_code('X', 'R', '2', '4') /* [31:0] x:R:G:B 8:8:8:8 little endian */ - -static u32 -allocate_framebuffer(void) -{ - u32 res = allocate_pmm(FRAMEBUFFER_SIZE, 1, 1); - if (!res) - return 0; - dprintf(1, "ramfb: framebuffer allocated at %x\n", res); - return res; -} - -int -ramfb_setup(void) -{ - dprintf(1, "ramfb: init\n"); - - if (GET_GLOBAL(HaveRunInit)) - return 0; - - u32 select = qemu_cfg_find_file("etc/ramfb"); - if (select == 0) { - dprintf(1, "ramfb: fw_cfg (etc/ramfb) file not found\n"); - return -1; - } - - dprintf(1, "ramfb: fw_cfg (etc/ramfb) file at slot 0x%x\n", select); - u32 fb = allocate_framebuffer(); - if (!fb) { - dprintf(1, "ramfb: allocating framebuffer failed\n"); - return -1; - } - - u64 addr = fb; - u8 bpp = FRAMEBUFFER_BPP * 8; - u32 xlines = FRAMEBUFFER_WIDTH; - u32 ylines = FRAMEBUFFER_HEIGHT; - u32 linelength = FRAMEBUFFER_STRIDE; - dprintf(1, "Found FB @ %llx %dx%d with %d bpp (%d stride)\n" - , addr, xlines, ylines, bpp, linelength); - - if (!addr || addr > 0xffffffff - || (bpp != 15 && bpp != 16 && bpp != 24 && bpp != 32)) { - dprintf(1, "Unable to use FB\n"); - return -1; - } - - cbvga_setup_modes(addr, bpp, xlines, ylines, linelength); - - struct QemuRAMFBCfg cfg = { - .addr = cpu_to_be64(fb), - .fourcc = cpu_to_be32(DRM_FORMAT_XRGB8888), - .flags = cpu_to_be32(0), - .width = cpu_to_be32(FRAMEBUFFER_WIDTH), - .height = cpu_to_be32(FRAMEBUFFER_HEIGHT), - .stride = cpu_to_be32(FRAMEBUFFER_STRIDE), - }; - qemu_cfg_write_entry(&cfg, select, sizeof(cfg)); - - return 0; -} diff --git a/payloads/external/SeaBIOS/vgasrc/stdvga.c b/payloads/external/SeaBIOS/vgasrc/stdvga.c deleted file mode 100644 index 0e01275c..00000000 --- a/payloads/external/SeaBIOS/vgasrc/stdvga.c +++ /dev/null @@ -1,485 +0,0 @@ -// Standard VGA driver code -// -// Copyright (C) 2009 Kevin O'Connor <kevin@koconnor.net> -// Copyright (C) 2001-2008 the LGPL VGABios developers Team -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "biosvar.h" // GET_GLOBAL -#include "farptr.h" // SET_FARVAR -#include "stdvga.h" // stdvga_setup -#include "string.h" // memset_far -#include "vgabios.h" // struct vgamode_s -#include "vgautil.h" // stdvga_attr_write -#include "x86.h" // outb - - -/**************************************************************** - * Attribute control - ****************************************************************/ - -void -stdvga_set_border_color(u8 color) -{ - u8 v1 = color & 0x0f; - if (v1 & 0x08) - v1 += 0x08; - stdvga_attr_write(0x00, v1); - - int i; - for (i = 1; i < 4; i++) - stdvga_attr_mask(i, 0x10, color & 0x10); -} - -void -stdvga_set_overscan_border_color(u8 color) -{ - stdvga_attr_write(0x11, color); -} - -u8 -stdvga_get_overscan_border_color(void) -{ - return stdvga_attr_read(0x11); -} - -void -stdvga_set_palette(u8 palid) -{ - int i; - for (i = 1; i < 4; i++) - stdvga_attr_mask(i, 0x01, palid & 0x01); -} - -void -stdvga_set_all_palette_reg(u16 seg, u8 *data_far) -{ - int i; - for (i = 0; i < 0x10; i++) { - stdvga_attr_write(i, GET_FARVAR(seg, *data_far)); - data_far++; - } - stdvga_attr_write(0x11, GET_FARVAR(seg, *data_far)); -} - -void -stdvga_get_all_palette_reg(u16 seg, u8 *data_far) -{ - int i; - for (i = 0; i < 0x10; i++) { - SET_FARVAR(seg, *data_far, stdvga_attr_read(i)); - data_far++; - } - SET_FARVAR(seg, *data_far, stdvga_attr_read(0x11)); -} - -void -stdvga_toggle_intensity(u8 flag) -{ - stdvga_attr_mask(0x10, 0x08, (flag & 0x01) << 3); -} - -void -stdvga_select_video_dac_color_page(u8 flag, u8 data) -{ - if (!(flag & 0x01)) { - // select paging mode - stdvga_attr_mask(0x10, 0x80, data << 7); - return; - } - // select page - u8 val = stdvga_attr_read(0x10); - if (!(val & 0x80)) - data <<= 2; - data &= 0x0f; - stdvga_attr_write(0x14, data); -} - -void -stdvga_read_video_dac_state(u8 *pmode, u8 *curpage) -{ - u8 val1 = stdvga_attr_read(0x10) >> 7; - u8 val2 = stdvga_attr_read(0x14) & 0x0f; - if (!(val1 & 0x01)) - val2 >>= 2; - *pmode = val1; - *curpage = val2; -} - - -/**************************************************************** - * DAC control - ****************************************************************/ - -void -stdvga_perform_gray_scale_summing(u16 start, u16 count) -{ - stdvga_attrindex_write(0x00); - int i; - for (i = start; i < start+count; i++) { - u8 rgb[3]; - stdvga_dac_read(GET_SEG(SS), rgb, i, 1); - - // intensity = ( 0.3 * Red ) + ( 0.59 * Green ) + ( 0.11 * Blue ) - u16 intensity = ((77 * rgb[0] + 151 * rgb[1] + 28 * rgb[2]) + 0x80) >> 8; - if (intensity > 0x3f) - intensity = 0x3f; - rgb[0] = rgb[1] = rgb[2] = intensity; - - stdvga_dac_write(GET_SEG(SS), rgb, i, 1); - } - stdvga_attrindex_write(0x20); -} - - -/**************************************************************** - * Memory control - ****************************************************************/ - -void -stdvga_set_text_block_specifier(u8 spec) -{ - stdvga_sequ_write(0x03, spec); -} - -// Enable reads and writes to the given "plane" when in planar4 mode. -void -stdvga_planar4_plane(int plane) -{ - if (plane < 0) { - // Return to default mode (read plane0, write all planes) - stdvga_sequ_write(0x02, 0x0f); - stdvga_grdc_write(0x04, 0); - } else { - stdvga_sequ_write(0x02, 1<<plane); - stdvga_grdc_write(0x04, plane); - } -} - - -/**************************************************************** - * Font loading - ****************************************************************/ - -static void -get_font_access(void) -{ - stdvga_sequ_write(0x00, 0x01); - stdvga_sequ_write(0x02, 0x04); - stdvga_sequ_write(0x04, 0x07); - stdvga_sequ_write(0x00, 0x03); - stdvga_grdc_write(0x04, 0x02); - stdvga_grdc_write(0x05, 0x00); - stdvga_grdc_write(0x06, 0x04); -} - -static void -release_font_access(void) -{ - stdvga_sequ_write(0x00, 0x01); - stdvga_sequ_write(0x02, 0x03); - stdvga_sequ_write(0x04, 0x03); - stdvga_sequ_write(0x00, 0x03); - u16 v = (stdvga_misc_read() & 0x01) ? 0x0e : 0x0a; - stdvga_grdc_write(0x06, v); - stdvga_grdc_write(0x04, 0x00); - stdvga_grdc_write(0x05, 0x10); -} - -void -stdvga_load_font(u16 seg, void *src_far, u16 count - , u16 start, u8 destflags, u8 fontsize) -{ - get_font_access(); - u16 blockaddr = ((destflags & 0x03) << 14) + ((destflags & 0x04) << 11); - void *dest_far = (void*)(blockaddr + start*32); - u16 i; - for (i = 0; i < count; i++) - memcpy_far(SEG_GRAPH, dest_far + i*32 - , seg, src_far + i*fontsize, fontsize); - release_font_access(); -} - - -/**************************************************************** - * CRTC registers - ****************************************************************/ - -u16 -stdvga_get_crtc(void) -{ - if (stdvga_misc_read() & 1) - return VGAREG_VGA_CRTC_ADDRESS; - return VGAREG_MDA_CRTC_ADDRESS; -} - -// Ratio between system visible framebuffer ram and the actual videoram used. -int -stdvga_vram_ratio(struct vgamode_s *vmode_g) -{ - switch (GET_GLOBAL(vmode_g->memmodel)) { - case MM_TEXT: - return 2; - case MM_CGA: - return 4 / GET_GLOBAL(vmode_g->depth); - case MM_PLANAR: - return 4; - default: - return 1; - } -} - -void -stdvga_set_cursor_shape(u16 cursor_type) -{ - u16 crtc_addr = stdvga_get_crtc(); - stdvga_crtc_write(crtc_addr, 0x0a, cursor_type >> 8); - stdvga_crtc_write(crtc_addr, 0x0b, cursor_type); -} - -void -stdvga_set_cursor_pos(int address) -{ - u16 crtc_addr = stdvga_get_crtc(); - address /= 2; // Assume we're in text mode. - stdvga_crtc_write(crtc_addr, 0x0e, address >> 8); - stdvga_crtc_write(crtc_addr, 0x0f, address); -} - -void -stdvga_set_scan_lines(u8 lines) -{ - stdvga_crtc_mask(stdvga_get_crtc(), 0x09, 0x1f, lines - 1); -} - -// Get vertical display end -u16 -stdvga_get_vde(void) -{ - u16 crtc_addr = stdvga_get_crtc(); - u16 vde = stdvga_crtc_read(crtc_addr, 0x12); - u8 ovl = stdvga_crtc_read(crtc_addr, 0x07); - vde += (((ovl & 0x02) << 7) + ((ovl & 0x40) << 3) + 1); - return vde; -} - -int -stdvga_get_window(struct vgamode_s *vmode_g, int window) -{ - return -1; -} - -int -stdvga_set_window(struct vgamode_s *vmode_g, int window, int val) -{ - return -1; -} - -int -stdvga_get_linelength(struct vgamode_s *vmode_g) -{ - u8 val = stdvga_crtc_read(stdvga_get_crtc(), 0x13); - return val * 8 / stdvga_vram_ratio(vmode_g); -} - -int -stdvga_set_linelength(struct vgamode_s *vmode_g, int val) -{ - val = DIV_ROUND_UP(val * stdvga_vram_ratio(vmode_g), 8); - stdvga_crtc_write(stdvga_get_crtc(), 0x13, val); - return 0; -} - -int -stdvga_get_displaystart(struct vgamode_s *vmode_g) -{ - u16 crtc_addr = stdvga_get_crtc(); - int addr = (stdvga_crtc_read(crtc_addr, 0x0c) << 8 - | stdvga_crtc_read(crtc_addr, 0x0d)); - return addr * 4 / stdvga_vram_ratio(vmode_g); -} - -int -stdvga_set_displaystart(struct vgamode_s *vmode_g, int val) -{ - u16 crtc_addr = stdvga_get_crtc(); - val = val * stdvga_vram_ratio(vmode_g) / 4; - stdvga_crtc_write(crtc_addr, 0x0c, val >> 8); - stdvga_crtc_write(crtc_addr, 0x0d, val); - return 0; -} - -int -stdvga_get_dacformat(struct vgamode_s *vmode_g) -{ - return -1; -} - -int -stdvga_set_dacformat(struct vgamode_s *vmode_g, int val) -{ - return -1; -} - -int -stdvga_get_linesize(struct vgamode_s *vmode_g) -{ - return DIV_ROUND_UP(GET_GLOBAL(vmode_g->width) * vga_bpp(vmode_g), 8); -} - -/**************************************************************** - * Save/Restore state - ****************************************************************/ - -struct saveVideoHardware { - u8 sequ_index; - u8 crtc_index; - u8 grdc_index; - u8 actl_index; - u8 feature; - u8 sequ_regs[4]; - u8 sequ0; - u8 crtc_regs[25]; - u8 actl_regs[20]; - u8 grdc_regs[9]; - u16 crtc_addr; - u8 plane_latch[4]; -} PACKED; - -static void -stdvga_save_hw_state(u16 seg, struct saveVideoHardware *info) -{ - u16 crtc_addr = stdvga_get_crtc(); - SET_FARVAR(seg, info->sequ_index, inb(VGAREG_SEQU_ADDRESS)); - SET_FARVAR(seg, info->crtc_index, inb(crtc_addr)); - SET_FARVAR(seg, info->grdc_index, inb(VGAREG_GRDC_ADDRESS)); - SET_FARVAR(seg, info->actl_index, stdvga_attrindex_read()); - SET_FARVAR(seg, info->feature, inb(VGAREG_READ_FEATURE_CTL)); - - int i; - for (i=0; i<4; i++) - SET_FARVAR(seg, info->sequ_regs[i], stdvga_sequ_read(i+1)); - SET_FARVAR(seg, info->sequ0, stdvga_sequ_read(0)); - - for (i=0; i<25; i++) - SET_FARVAR(seg, info->crtc_regs[i], stdvga_crtc_read(crtc_addr, i)); - - for (i=0; i<20; i++) - SET_FARVAR(seg, info->actl_regs[i], stdvga_attr_read(i)); - - for (i=0; i<9; i++) - SET_FARVAR(seg, info->grdc_regs[i], stdvga_grdc_read(i)); - - SET_FARVAR(seg, info->crtc_addr, crtc_addr); - - /* XXX: read plane latches */ - for (i=0; i<4; i++) - SET_FARVAR(seg, info->plane_latch[i], 0); -} - -static void -stdvga_restore_hw_state(u16 seg, struct saveVideoHardware *info) -{ - int i; - for (i=0; i<4; i++) - stdvga_sequ_write(i+1, GET_FARVAR(seg, info->sequ_regs[i])); - stdvga_sequ_write(0x00, GET_FARVAR(seg, info->sequ0)); - - // Disable CRTC write protection - u16 crtc_addr = GET_FARVAR(seg, info->crtc_addr); - stdvga_crtc_write(crtc_addr, 0x11, 0x00); - // Set CRTC regs - for (i=0; i<25; i++) - if (i != 0x11) - stdvga_crtc_write(crtc_addr, i, GET_FARVAR(seg, info->crtc_regs[i])); - // select crtc base address - stdvga_misc_mask(0x01, crtc_addr == VGAREG_VGA_CRTC_ADDRESS ? 0x01 : 0x00); - - // enable write protection if needed - stdvga_crtc_write(crtc_addr, 0x11, GET_FARVAR(seg, info->crtc_regs[0x11])); - - // Set Attribute Ctl - for (i=0; i<20; i++) - stdvga_attr_write(i, GET_FARVAR(seg, info->actl_regs[i])); - stdvga_attrindex_write(GET_FARVAR(seg, info->actl_index)); - - for (i=0; i<9; i++) - stdvga_grdc_write(i, GET_FARVAR(seg, info->grdc_regs[i])); - - outb(GET_FARVAR(seg, info->sequ_index), VGAREG_SEQU_ADDRESS); - outb(GET_FARVAR(seg, info->crtc_index), crtc_addr); - outb(GET_FARVAR(seg, info->grdc_index), VGAREG_GRDC_ADDRESS); - outb(GET_FARVAR(seg, info->feature), crtc_addr - 0x4 + 0xa); -} - -struct saveDACcolors { - u8 rwmode; - u8 peladdr; - u8 pelmask; - u8 dac[768]; - u8 color_select; -} PACKED; - -static void -stdvga_save_dac_state(u16 seg, struct saveDACcolors *info) -{ - /* XXX: check this */ - SET_FARVAR(seg, info->rwmode, inb(VGAREG_DAC_STATE)); - SET_FARVAR(seg, info->peladdr, inb(VGAREG_DAC_WRITE_ADDRESS)); - SET_FARVAR(seg, info->pelmask, stdvga_pelmask_read()); - stdvga_dac_read(seg, info->dac, 0, 256); - SET_FARVAR(seg, info->color_select, 0); -} - -static void -stdvga_restore_dac_state(u16 seg, struct saveDACcolors *info) -{ - stdvga_pelmask_write(GET_FARVAR(seg, info->pelmask)); - stdvga_dac_write(seg, info->dac, 0, 256); - outb(GET_FARVAR(seg, info->peladdr), VGAREG_DAC_WRITE_ADDRESS); -} - -int -stdvga_save_restore(int cmd, u16 seg, void *data) -{ - void *pos = data; - if (cmd & SR_HARDWARE) { - if (cmd & SR_SAVE) - stdvga_save_hw_state(seg, pos); - if (cmd & SR_RESTORE) - stdvga_restore_hw_state(seg, pos); - pos += sizeof(struct saveVideoHardware); - } - pos += bda_save_restore(cmd, seg, pos); - if (cmd & SR_DAC) { - if (cmd & SR_SAVE) - stdvga_save_dac_state(seg, pos); - if (cmd & SR_RESTORE) - stdvga_restore_dac_state(seg, pos); - pos += sizeof(struct saveDACcolors); - } - return pos - data; -} - - -/**************************************************************** - * Misc - ****************************************************************/ - -void -stdvga_enable_video_addressing(u8 disable) -{ - u8 v = (disable & 1) ? 0x00 : 0x02; - stdvga_misc_mask(0x02, v); -} - -int -stdvga_setup(void) -{ - // switch to color mode and enable CPU access 480 lines - stdvga_misc_write(0xc3); - // more than 64k 3C4/04 - stdvga_sequ_write(0x04, 0x02); - - return 0; -} diff --git a/payloads/external/SeaBIOS/vgasrc/stdvga.h b/payloads/external/SeaBIOS/vgasrc/stdvga.h deleted file mode 100644 index 4184c600..00000000 --- a/payloads/external/SeaBIOS/vgasrc/stdvga.h +++ /dev/null @@ -1,81 +0,0 @@ -#ifndef __STDVGA_H -#define __STDVGA_H - -#include "types.h" // u8 - -// VGA registers -#define VGAREG_ACTL_ADDRESS 0x3c0 -#define VGAREG_ACTL_WRITE_DATA 0x3c0 -#define VGAREG_ACTL_READ_DATA 0x3c1 - -#define VGAREG_INPUT_STATUS 0x3c2 -#define VGAREG_WRITE_MISC_OUTPUT 0x3c2 -#define VGAREG_VIDEO_ENABLE 0x3c3 -#define VGAREG_SEQU_ADDRESS 0x3c4 -#define VGAREG_SEQU_DATA 0x3c5 - -#define VGAREG_PEL_MASK 0x3c6 -#define VGAREG_DAC_STATE 0x3c7 -#define VGAREG_DAC_READ_ADDRESS 0x3c7 -#define VGAREG_DAC_WRITE_ADDRESS 0x3c8 -#define VGAREG_DAC_DATA 0x3c9 - -#define VGAREG_READ_FEATURE_CTL 0x3ca -#define VGAREG_READ_MISC_OUTPUT 0x3cc - -#define VGAREG_GRDC_ADDRESS 0x3ce -#define VGAREG_GRDC_DATA 0x3cf - -#define VGAREG_MDA_CRTC_ADDRESS 0x3b4 -#define VGAREG_MDA_CRTC_DATA 0x3b5 -#define VGAREG_VGA_CRTC_ADDRESS 0x3d4 -#define VGAREG_VGA_CRTC_DATA 0x3d5 - -#define VGAREG_MDA_WRITE_FEATURE_CTL 0x3ba -#define VGAREG_VGA_WRITE_FEATURE_CTL 0x3da -#define VGAREG_ACTL_RESET 0x3da - -#define VGAREG_MDA_MODECTL 0x3b8 -#define VGAREG_CGA_MODECTL 0x3d8 -#define VGAREG_CGA_PALETTE 0x3d9 - -/* Video memory */ -#define SEG_GRAPH 0xA000 -#define SEG_CTEXT 0xB800 -#define SEG_MTEXT 0xB000 - -// stdvga.c -void stdvga_set_border_color(u8 color); -void stdvga_set_overscan_border_color(u8 color); -u8 stdvga_get_overscan_border_color(void); -void stdvga_set_palette(u8 palid); -void stdvga_set_all_palette_reg(u16 seg, u8 *data_far); -void stdvga_get_all_palette_reg(u16 seg, u8 *data_far); -void stdvga_toggle_intensity(u8 flag); -void stdvga_select_video_dac_color_page(u8 flag, u8 data); -void stdvga_read_video_dac_state(u8 *pmode, u8 *curpage); -void stdvga_perform_gray_scale_summing(u16 start, u16 count); -void stdvga_set_text_block_specifier(u8 spec); -void stdvga_planar4_plane(int plane); -void stdvga_load_font(u16 seg, void *src_far, u16 count - , u16 start, u8 destflags, u8 fontsize); -u16 stdvga_get_crtc(void); -struct vgamode_s; -int stdvga_vram_ratio(struct vgamode_s *vmode_g); -void stdvga_set_cursor_shape(u16 cursor_type); -void stdvga_set_cursor_pos(int address); -void stdvga_set_scan_lines(u8 lines); -u16 stdvga_get_vde(void); -int stdvga_get_window(struct vgamode_s *vmode_g, int window); -int stdvga_set_window(struct vgamode_s *vmode_g, int window, int val); -int stdvga_get_linelength(struct vgamode_s *vmode_g); -int stdvga_set_linelength(struct vgamode_s *vmode_g, int val); -int stdvga_get_displaystart(struct vgamode_s *vmode_g); -int stdvga_set_displaystart(struct vgamode_s *vmode_g, int val); -int stdvga_get_dacformat(struct vgamode_s *vmode_g); -int stdvga_set_dacformat(struct vgamode_s *vmode_g, int val); -int stdvga_save_restore(int cmd, u16 seg, void *data); -void stdvga_enable_video_addressing(u8 disable); -int stdvga_setup(void); - -#endif // stdvga.h diff --git a/payloads/external/SeaBIOS/vgasrc/stdvgaio.c b/payloads/external/SeaBIOS/vgasrc/stdvgaio.c deleted file mode 100644 index 77fcecdf..00000000 --- a/payloads/external/SeaBIOS/vgasrc/stdvgaio.c +++ /dev/null @@ -1,186 +0,0 @@ -// Standard VGA IO port access -// -// Copyright (C) 2012 Kevin O'Connor <kevin@koconnor.net> -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "farptr.h" // GET_FARVAR -#include "stdvga.h" // VGAREG_PEL_MASK -#include "vgautil.h" // stdvga_pelmask_read -#include "x86.h" // inb - -u8 -stdvga_pelmask_read(void) -{ - return inb(VGAREG_PEL_MASK); -} - -void -stdvga_pelmask_write(u8 value) -{ - outb(value, VGAREG_PEL_MASK); -} - - -u8 -stdvga_misc_read(void) -{ - return inb(VGAREG_READ_MISC_OUTPUT); -} - -void -stdvga_misc_write(u8 value) -{ - outb(value, VGAREG_WRITE_MISC_OUTPUT); -} - -void -stdvga_misc_mask(u8 off, u8 on) -{ - stdvga_misc_write((stdvga_misc_read() & ~off) | on); -} - - -u8 -stdvga_sequ_read(u8 index) -{ - outb(index, VGAREG_SEQU_ADDRESS); - return inb(VGAREG_SEQU_DATA); -} - -void -stdvga_sequ_write(u8 index, u8 value) -{ - outw((value<<8) | index, VGAREG_SEQU_ADDRESS); -} - -void -stdvga_sequ_mask(u8 index, u8 off, u8 on) -{ - outb(index, VGAREG_SEQU_ADDRESS); - u8 v = inb(VGAREG_SEQU_DATA); - outb((v & ~off) | on, VGAREG_SEQU_DATA); -} - - -u8 -stdvga_grdc_read(u8 index) -{ - outb(index, VGAREG_GRDC_ADDRESS); - return inb(VGAREG_GRDC_DATA); -} - -void -stdvga_grdc_write(u8 index, u8 value) -{ - outw((value<<8) | index, VGAREG_GRDC_ADDRESS); -} - -void -stdvga_grdc_mask(u8 index, u8 off, u8 on) -{ - outb(index, VGAREG_GRDC_ADDRESS); - u8 v = inb(VGAREG_GRDC_DATA); - outb((v & ~off) | on, VGAREG_GRDC_DATA); -} - - -u8 -stdvga_crtc_read(u16 crtc_addr, u8 index) -{ - outb(index, crtc_addr); - return inb(crtc_addr + 1); -} - -void -stdvga_crtc_write(u16 crtc_addr, u8 index, u8 value) -{ - outw((value<<8) | index, crtc_addr); -} - -void -stdvga_crtc_mask(u16 crtc_addr, u8 index, u8 off, u8 on) -{ - outb(index, crtc_addr); - u8 v = inb(crtc_addr + 1); - outb((v & ~off) | on, crtc_addr + 1); -} - - -u8 -stdvga_attr_read(u8 index) -{ - inb(VGAREG_ACTL_RESET); - u8 orig = inb(VGAREG_ACTL_ADDRESS); - outb(index, VGAREG_ACTL_ADDRESS); - u8 v = inb(VGAREG_ACTL_READ_DATA); - inb(VGAREG_ACTL_RESET); - outb(orig, VGAREG_ACTL_ADDRESS); - return v; -} - -void -stdvga_attr_write(u8 index, u8 value) -{ - inb(VGAREG_ACTL_RESET); - u8 orig = inb(VGAREG_ACTL_ADDRESS); - outb(index, VGAREG_ACTL_ADDRESS); - outb(value, VGAREG_ACTL_WRITE_DATA); - outb(orig, VGAREG_ACTL_ADDRESS); -} - -void -stdvga_attr_mask(u8 index, u8 off, u8 on) -{ - inb(VGAREG_ACTL_RESET); - u8 orig = inb(VGAREG_ACTL_ADDRESS); - outb(index, VGAREG_ACTL_ADDRESS); - u8 v = inb(VGAREG_ACTL_READ_DATA); - outb((v & ~off) | on, VGAREG_ACTL_WRITE_DATA); - outb(orig, VGAREG_ACTL_ADDRESS); -} - -u8 -stdvga_attrindex_read(void) -{ - inb(VGAREG_ACTL_RESET); - return inb(VGAREG_ACTL_ADDRESS); -} - -void -stdvga_attrindex_write(u8 value) -{ - inb(VGAREG_ACTL_RESET); - outb(value, VGAREG_ACTL_ADDRESS); -} - - -void -stdvga_dac_read(u16 seg, u8 *data_far, u8 start, int count) -{ - outb(start, VGAREG_DAC_READ_ADDRESS); - while (count) { - SET_FARVAR(seg, *data_far, inb(VGAREG_DAC_DATA)); - data_far++; - SET_FARVAR(seg, *data_far, inb(VGAREG_DAC_DATA)); - data_far++; - SET_FARVAR(seg, *data_far, inb(VGAREG_DAC_DATA)); - data_far++; - count--; - } -} - -void -stdvga_dac_write(u16 seg, u8 *data_far, u8 start, int count) -{ - outb(start, VGAREG_DAC_WRITE_ADDRESS); - while (count) { - outb(GET_FARVAR(seg, *data_far), VGAREG_DAC_DATA); - data_far++; - outb(GET_FARVAR(seg, *data_far), VGAREG_DAC_DATA); - data_far++; - outb(GET_FARVAR(seg, *data_far), VGAREG_DAC_DATA); - data_far++; - count--; - } -} diff --git a/payloads/external/SeaBIOS/vgasrc/stdvgamodes.c b/payloads/external/SeaBIOS/vgasrc/stdvgamodes.c deleted file mode 100644 index 173dd4f7..00000000 --- a/payloads/external/SeaBIOS/vgasrc/stdvgamodes.c +++ /dev/null @@ -1,534 +0,0 @@ -// Standard VGA mode information. -// -// Copyright (C) 2009 Kevin O'Connor <kevin@koconnor.net> -// Copyright (C) 2001-2008 the LGPL VGABios developers Team -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "biosvar.h" // GET_GLOBAL -#include "output.h" // warn_internalerror -#include "std/vga.h" // struct video_param_s -#include "stdvga.h" // stdvga_find_mode -#include "string.h" // memcpy_far -#include "vgabios.h" // SET_VGA -#include "vgautil.h" // vgafont16 - - -/**************************************************************** - * Video mode register definitions - ****************************************************************/ - -/* Mono */ -static u8 palette0[] VAR16 = { - 0x00,0x00,0x00, 0x00,0x00,0x00, 0x00,0x00,0x00, 0x00,0x00,0x00, - 0x00,0x00,0x00, 0x00,0x00,0x00, 0x00,0x00,0x00, 0x00,0x00,0x00, - 0x2a,0x2a,0x2a, 0x2a,0x2a,0x2a, 0x2a,0x2a,0x2a, 0x2a,0x2a,0x2a, - 0x2a,0x2a,0x2a, 0x2a,0x2a,0x2a, 0x2a,0x2a,0x2a, 0x2a,0x2a,0x2a, - 0x2a,0x2a,0x2a, 0x2a,0x2a,0x2a, 0x2a,0x2a,0x2a, 0x2a,0x2a,0x2a, - 0x2a,0x2a,0x2a, 0x2a,0x2a,0x2a, 0x2a,0x2a,0x2a, 0x2a,0x2a,0x2a, - 0x3f,0x3f,0x3f, 0x3f,0x3f,0x3f, 0x3f,0x3f,0x3f, 0x3f,0x3f,0x3f, - 0x3f,0x3f,0x3f, 0x3f,0x3f,0x3f, 0x3f,0x3f,0x3f, 0x3f,0x3f,0x3f, - 0x00,0x00,0x00, 0x00,0x00,0x00, 0x00,0x00,0x00, 0x00,0x00,0x00, - 0x00,0x00,0x00, 0x00,0x00,0x00, 0x00,0x00,0x00, 0x00,0x00,0x00, - 0x2a,0x2a,0x2a, 0x2a,0x2a,0x2a, 0x2a,0x2a,0x2a, 0x2a,0x2a,0x2a, - 0x2a,0x2a,0x2a, 0x2a,0x2a,0x2a, 0x2a,0x2a,0x2a, 0x2a,0x2a,0x2a, - 0x2a,0x2a,0x2a, 0x2a,0x2a,0x2a, 0x2a,0x2a,0x2a, 0x2a,0x2a,0x2a, - 0x2a,0x2a,0x2a, 0x2a,0x2a,0x2a, 0x2a,0x2a,0x2a, 0x2a,0x2a,0x2a, - 0x3f,0x3f,0x3f, 0x3f,0x3f,0x3f, 0x3f,0x3f,0x3f, 0x3f,0x3f,0x3f, - 0x3f,0x3f,0x3f, 0x3f,0x3f,0x3f, 0x3f,0x3f,0x3f, 0x3f,0x3f,0x3f -}; - -static u8 palette1[] VAR16 = { - 0x00,0x00,0x00, 0x00,0x00,0x2a, 0x00,0x2a,0x00, 0x00,0x2a,0x2a, - 0x2a,0x00,0x00, 0x2a,0x00,0x2a, 0x2a,0x15,0x00, 0x2a,0x2a,0x2a, - 0x00,0x00,0x00, 0x00,0x00,0x2a, 0x00,0x2a,0x00, 0x00,0x2a,0x2a, - 0x2a,0x00,0x00, 0x2a,0x00,0x2a, 0x2a,0x15,0x00, 0x2a,0x2a,0x2a, - 0x15,0x15,0x15, 0x15,0x15,0x3f, 0x15,0x3f,0x15, 0x15,0x3f,0x3f, - 0x3f,0x15,0x15, 0x3f,0x15,0x3f, 0x3f,0x3f,0x15, 0x3f,0x3f,0x3f, - 0x15,0x15,0x15, 0x15,0x15,0x3f, 0x15,0x3f,0x15, 0x15,0x3f,0x3f, - 0x3f,0x15,0x15, 0x3f,0x15,0x3f, 0x3f,0x3f,0x15, 0x3f,0x3f,0x3f, - 0x00,0x00,0x00, 0x00,0x00,0x2a, 0x00,0x2a,0x00, 0x00,0x2a,0x2a, - 0x2a,0x00,0x00, 0x2a,0x00,0x2a, 0x2a,0x15,0x00, 0x2a,0x2a,0x2a, - 0x00,0x00,0x00, 0x00,0x00,0x2a, 0x00,0x2a,0x00, 0x00,0x2a,0x2a, - 0x2a,0x00,0x00, 0x2a,0x00,0x2a, 0x2a,0x15,0x00, 0x2a,0x2a,0x2a, - 0x15,0x15,0x15, 0x15,0x15,0x3f, 0x15,0x3f,0x15, 0x15,0x3f,0x3f, - 0x3f,0x15,0x15, 0x3f,0x15,0x3f, 0x3f,0x3f,0x15, 0x3f,0x3f,0x3f, - 0x15,0x15,0x15, 0x15,0x15,0x3f, 0x15,0x3f,0x15, 0x15,0x3f,0x3f, - 0x3f,0x15,0x15, 0x3f,0x15,0x3f, 0x3f,0x3f,0x15, 0x3f,0x3f,0x3f -}; - -static u8 palette2[] VAR16 = { - 0x00,0x00,0x00, 0x00,0x00,0x2a, 0x00,0x2a,0x00, 0x00,0x2a,0x2a, - 0x2a,0x00,0x00, 0x2a,0x00,0x2a, 0x2a,0x2a,0x00, 0x2a,0x2a,0x2a, - 0x00,0x00,0x15, 0x00,0x00,0x3f, 0x00,0x2a,0x15, 0x00,0x2a,0x3f, - 0x2a,0x00,0x15, 0x2a,0x00,0x3f, 0x2a,0x2a,0x15, 0x2a,0x2a,0x3f, - 0x00,0x15,0x00, 0x00,0x15,0x2a, 0x00,0x3f,0x00, 0x00,0x3f,0x2a, - 0x2a,0x15,0x00, 0x2a,0x15,0x2a, 0x2a,0x3f,0x00, 0x2a,0x3f,0x2a, - 0x00,0x15,0x15, 0x00,0x15,0x3f, 0x00,0x3f,0x15, 0x00,0x3f,0x3f, - 0x2a,0x15,0x15, 0x2a,0x15,0x3f, 0x2a,0x3f,0x15, 0x2a,0x3f,0x3f, - 0x15,0x00,0x00, 0x15,0x00,0x2a, 0x15,0x2a,0x00, 0x15,0x2a,0x2a, - 0x3f,0x00,0x00, 0x3f,0x00,0x2a, 0x3f,0x2a,0x00, 0x3f,0x2a,0x2a, - 0x15,0x00,0x15, 0x15,0x00,0x3f, 0x15,0x2a,0x15, 0x15,0x2a,0x3f, - 0x3f,0x00,0x15, 0x3f,0x00,0x3f, 0x3f,0x2a,0x15, 0x3f,0x2a,0x3f, - 0x15,0x15,0x00, 0x15,0x15,0x2a, 0x15,0x3f,0x00, 0x15,0x3f,0x2a, - 0x3f,0x15,0x00, 0x3f,0x15,0x2a, 0x3f,0x3f,0x00, 0x3f,0x3f,0x2a, - 0x15,0x15,0x15, 0x15,0x15,0x3f, 0x15,0x3f,0x15, 0x15,0x3f,0x3f, - 0x3f,0x15,0x15, 0x3f,0x15,0x3f, 0x3f,0x3f,0x15, 0x3f,0x3f,0x3f -}; - -static u8 palette3[] VAR16 = { - 0x00,0x00,0x00, 0x00,0x00,0x2a, 0x00,0x2a,0x00, 0x00,0x2a,0x2a, - 0x2a,0x00,0x00, 0x2a,0x00,0x2a, 0x2a,0x15,0x00, 0x2a,0x2a,0x2a, - 0x15,0x15,0x15, 0x15,0x15,0x3f, 0x15,0x3f,0x15, 0x15,0x3f,0x3f, - 0x3f,0x15,0x15, 0x3f,0x15,0x3f, 0x3f,0x3f,0x15, 0x3f,0x3f,0x3f, - 0x00,0x00,0x00, 0x05,0x05,0x05, 0x08,0x08,0x08, 0x0b,0x0b,0x0b, - 0x0e,0x0e,0x0e, 0x11,0x11,0x11, 0x14,0x14,0x14, 0x18,0x18,0x18, - 0x1c,0x1c,0x1c, 0x20,0x20,0x20, 0x24,0x24,0x24, 0x28,0x28,0x28, - 0x2d,0x2d,0x2d, 0x32,0x32,0x32, 0x38,0x38,0x38, 0x3f,0x3f,0x3f, - 0x00,0x00,0x3f, 0x10,0x00,0x3f, 0x1f,0x00,0x3f, 0x2f,0x00,0x3f, - 0x3f,0x00,0x3f, 0x3f,0x00,0x2f, 0x3f,0x00,0x1f, 0x3f,0x00,0x10, - 0x3f,0x00,0x00, 0x3f,0x10,0x00, 0x3f,0x1f,0x00, 0x3f,0x2f,0x00, - 0x3f,0x3f,0x00, 0x2f,0x3f,0x00, 0x1f,0x3f,0x00, 0x10,0x3f,0x00, - 0x00,0x3f,0x00, 0x00,0x3f,0x10, 0x00,0x3f,0x1f, 0x00,0x3f,0x2f, - 0x00,0x3f,0x3f, 0x00,0x2f,0x3f, 0x00,0x1f,0x3f, 0x00,0x10,0x3f, - 0x1f,0x1f,0x3f, 0x27,0x1f,0x3f, 0x2f,0x1f,0x3f, 0x37,0x1f,0x3f, - 0x3f,0x1f,0x3f, 0x3f,0x1f,0x37, 0x3f,0x1f,0x2f, 0x3f,0x1f,0x27, - - 0x3f,0x1f,0x1f, 0x3f,0x27,0x1f, 0x3f,0x2f,0x1f, 0x3f,0x37,0x1f, - 0x3f,0x3f,0x1f, 0x37,0x3f,0x1f, 0x2f,0x3f,0x1f, 0x27,0x3f,0x1f, - 0x1f,0x3f,0x1f, 0x1f,0x3f,0x27, 0x1f,0x3f,0x2f, 0x1f,0x3f,0x37, - 0x1f,0x3f,0x3f, 0x1f,0x37,0x3f, 0x1f,0x2f,0x3f, 0x1f,0x27,0x3f, - 0x2d,0x2d,0x3f, 0x31,0x2d,0x3f, 0x36,0x2d,0x3f, 0x3a,0x2d,0x3f, - 0x3f,0x2d,0x3f, 0x3f,0x2d,0x3a, 0x3f,0x2d,0x36, 0x3f,0x2d,0x31, - 0x3f,0x2d,0x2d, 0x3f,0x31,0x2d, 0x3f,0x36,0x2d, 0x3f,0x3a,0x2d, - 0x3f,0x3f,0x2d, 0x3a,0x3f,0x2d, 0x36,0x3f,0x2d, 0x31,0x3f,0x2d, - 0x2d,0x3f,0x2d, 0x2d,0x3f,0x31, 0x2d,0x3f,0x36, 0x2d,0x3f,0x3a, - 0x2d,0x3f,0x3f, 0x2d,0x3a,0x3f, 0x2d,0x36,0x3f, 0x2d,0x31,0x3f, - 0x00,0x00,0x1c, 0x07,0x00,0x1c, 0x0e,0x00,0x1c, 0x15,0x00,0x1c, - 0x1c,0x00,0x1c, 0x1c,0x00,0x15, 0x1c,0x00,0x0e, 0x1c,0x00,0x07, - 0x1c,0x00,0x00, 0x1c,0x07,0x00, 0x1c,0x0e,0x00, 0x1c,0x15,0x00, - 0x1c,0x1c,0x00, 0x15,0x1c,0x00, 0x0e,0x1c,0x00, 0x07,0x1c,0x00, - 0x00,0x1c,0x00, 0x00,0x1c,0x07, 0x00,0x1c,0x0e, 0x00,0x1c,0x15, - 0x00,0x1c,0x1c, 0x00,0x15,0x1c, 0x00,0x0e,0x1c, 0x00,0x07,0x1c, - - 0x0e,0x0e,0x1c, 0x11,0x0e,0x1c, 0x15,0x0e,0x1c, 0x18,0x0e,0x1c, - 0x1c,0x0e,0x1c, 0x1c,0x0e,0x18, 0x1c,0x0e,0x15, 0x1c,0x0e,0x11, - 0x1c,0x0e,0x0e, 0x1c,0x11,0x0e, 0x1c,0x15,0x0e, 0x1c,0x18,0x0e, - 0x1c,0x1c,0x0e, 0x18,0x1c,0x0e, 0x15,0x1c,0x0e, 0x11,0x1c,0x0e, - 0x0e,0x1c,0x0e, 0x0e,0x1c,0x11, 0x0e,0x1c,0x15, 0x0e,0x1c,0x18, - 0x0e,0x1c,0x1c, 0x0e,0x18,0x1c, 0x0e,0x15,0x1c, 0x0e,0x11,0x1c, - 0x14,0x14,0x1c, 0x16,0x14,0x1c, 0x18,0x14,0x1c, 0x1a,0x14,0x1c, - 0x1c,0x14,0x1c, 0x1c,0x14,0x1a, 0x1c,0x14,0x18, 0x1c,0x14,0x16, - 0x1c,0x14,0x14, 0x1c,0x16,0x14, 0x1c,0x18,0x14, 0x1c,0x1a,0x14, - 0x1c,0x1c,0x14, 0x1a,0x1c,0x14, 0x18,0x1c,0x14, 0x16,0x1c,0x14, - 0x14,0x1c,0x14, 0x14,0x1c,0x16, 0x14,0x1c,0x18, 0x14,0x1c,0x1a, - 0x14,0x1c,0x1c, 0x14,0x1a,0x1c, 0x14,0x18,0x1c, 0x14,0x16,0x1c, - 0x00,0x00,0x10, 0x04,0x00,0x10, 0x08,0x00,0x10, 0x0c,0x00,0x10, - 0x10,0x00,0x10, 0x10,0x00,0x0c, 0x10,0x00,0x08, 0x10,0x00,0x04, - 0x10,0x00,0x00, 0x10,0x04,0x00, 0x10,0x08,0x00, 0x10,0x0c,0x00, - 0x10,0x10,0x00, 0x0c,0x10,0x00, 0x08,0x10,0x00, 0x04,0x10,0x00, - - 0x00,0x10,0x00, 0x00,0x10,0x04, 0x00,0x10,0x08, 0x00,0x10,0x0c, - 0x00,0x10,0x10, 0x00,0x0c,0x10, 0x00,0x08,0x10, 0x00,0x04,0x10, - 0x08,0x08,0x10, 0x0a,0x08,0x10, 0x0c,0x08,0x10, 0x0e,0x08,0x10, - 0x10,0x08,0x10, 0x10,0x08,0x0e, 0x10,0x08,0x0c, 0x10,0x08,0x0a, - 0x10,0x08,0x08, 0x10,0x0a,0x08, 0x10,0x0c,0x08, 0x10,0x0e,0x08, - 0x10,0x10,0x08, 0x0e,0x10,0x08, 0x0c,0x10,0x08, 0x0a,0x10,0x08, - 0x08,0x10,0x08, 0x08,0x10,0x0a, 0x08,0x10,0x0c, 0x08,0x10,0x0e, - 0x08,0x10,0x10, 0x08,0x0e,0x10, 0x08,0x0c,0x10, 0x08,0x0a,0x10, - 0x0b,0x0b,0x10, 0x0c,0x0b,0x10, 0x0d,0x0b,0x10, 0x0f,0x0b,0x10, - 0x10,0x0b,0x10, 0x10,0x0b,0x0f, 0x10,0x0b,0x0d, 0x10,0x0b,0x0c, - 0x10,0x0b,0x0b, 0x10,0x0c,0x0b, 0x10,0x0d,0x0b, 0x10,0x0f,0x0b, - 0x10,0x10,0x0b, 0x0f,0x10,0x0b, 0x0d,0x10,0x0b, 0x0c,0x10,0x0b, - 0x0b,0x10,0x0b, 0x0b,0x10,0x0c, 0x0b,0x10,0x0d, 0x0b,0x10,0x0f, - 0x0b,0x10,0x10, 0x0b,0x0f,0x10, 0x0b,0x0d,0x10, 0x0b,0x0c,0x10, - 0x00,0x00,0x00, 0x00,0x00,0x00, 0x00,0x00,0x00, 0x00,0x00,0x00, - 0x00,0x00,0x00, 0x00,0x00,0x00, 0x00,0x00,0x00, 0x00,0x00,0x00 -}; - -static u8 sequ_01[] VAR16 = { 0x08, 0x03, 0x00, 0x02 }; -static u8 crtc_01[] VAR16 = { - 0x2d, 0x27, 0x28, 0x90, 0x2b, 0xa0, 0xbf, 0x1f, - 0x00, 0x4f, 0x0d, 0x0e, 0x00, 0x00, 0x00, 0x00, - 0x9c, 0x8e, 0x8f, 0x14, 0x1f, 0x96, 0xb9, 0xa3, - 0xff }; -static u8 actl_01[] VAR16 = { - 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x14, 0x07, - 0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f, - 0x0c, 0x00, 0x0f, 0x08 }; -static u8 grdc_01[] VAR16 = { - 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x0e, 0x0f, 0xff }; -static u8 sequ_03[] VAR16 = { 0x00, 0x03, 0x00, 0x02 }; -static u8 crtc_03[] VAR16 = { - 0x5f, 0x4f, 0x50, 0x82, 0x55, 0x81, 0xbf, 0x1f, - 0x00, 0x4f, 0x0d, 0x0e, 0x00, 0x00, 0x00, 0x00, - 0x9c, 0x8e, 0x8f, 0x28, 0x1f, 0x96, 0xb9, 0xa3, - 0xff }; -static u8 sequ_04[] VAR16 = { 0x09, 0x03, 0x00, 0x02 }; -static u8 crtc_04[] VAR16 = { - 0x2d, 0x27, 0x28, 0x90, 0x2b, 0x80, 0xbf, 0x1f, - 0x00, 0xc1, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x9c, 0x8e, 0x8f, 0x14, 0x00, 0x96, 0xb9, 0xa2, - 0xff }; -static u8 actl_04[] VAR16 = { - 0x00, 0x13, 0x15, 0x17, 0x02, 0x04, 0x06, 0x07, - 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, - 0x01, 0x00, 0x03, 0x00 }; -static u8 grdc_04[] VAR16 = { - 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x0f, 0x0f, 0xff }; -static u8 sequ_06[] VAR16 = { 0x01, 0x01, 0x00, 0x06 }; -static u8 crtc_06[] VAR16 = { - 0x5f, 0x4f, 0x50, 0x82, 0x54, 0x80, 0xbf, 0x1f, - 0x00, 0xc1, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x9c, 0x8e, 0x8f, 0x28, 0x00, 0x96, 0xb9, 0xc2, - 0xff }; -static u8 actl_06[] VAR16 = { - 0x00, 0x17, 0x17, 0x17, 0x17, 0x17, 0x17, 0x17, - 0x17, 0x17, 0x17, 0x17, 0x17, 0x17, 0x17, 0x17, - 0x01, 0x00, 0x01, 0x00 }; -static u8 grdc_06[] VAR16 = { - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0d, 0x0f, 0xff }; -static u8 crtc_07[] VAR16 = { - 0x5f, 0x4f, 0x50, 0x82, 0x55, 0x81, 0xbf, 0x1f, - 0x00, 0x4f, 0x0d, 0x0e, 0x00, 0x00, 0x00, 0x00, - 0x9c, 0x8e, 0x8f, 0x28, 0x0f, 0x96, 0xb9, 0xa3, - 0xff }; -static u8 actl_07[] VAR16 = { - 0x00, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, - 0x10, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, - 0x0e, 0x00, 0x0f, 0x08 }; -static u8 grdc_07[] VAR16 = { - 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x0a, 0x0f, 0xff }; -static u8 sequ_0d[] VAR16 = { 0x09, 0x0f, 0x00, 0x06 }; -static u8 crtc_0d[] VAR16 = { - 0x2d, 0x27, 0x28, 0x90, 0x2b, 0x80, 0xbf, 0x1f, - 0x00, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x9c, 0x8e, 0x8f, 0x14, 0x00, 0x96, 0xb9, 0xe3, - 0xff }; -static u8 actl_0d[] VAR16 = { - 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, - 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, - 0x01, 0x00, 0x0f, 0x00 }; -static u8 grdc_0d[] VAR16 = { - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x05, 0x0f, 0xff }; -static u8 sequ_0e[] VAR16 = { 0x01, 0x0f, 0x00, 0x06 }; -static u8 crtc_0e[] VAR16 = { - 0x5f, 0x4f, 0x50, 0x82, 0x54, 0x80, 0xbf, 0x1f, - 0x00, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x9c, 0x8e, 0x8f, 0x28, 0x00, 0x96, 0xb9, 0xe3, - 0xff }; -static u8 crtc_0f[] VAR16 = { - 0x5f, 0x4f, 0x50, 0x82, 0x54, 0x80, 0xbf, 0x1f, - 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x83, 0x85, 0x5d, 0x28, 0x0f, 0x63, 0xba, 0xe3, - 0xff }; -static u8 actl_0f[] VAR16 = { - 0x00, 0x08, 0x00, 0x00, 0x18, 0x18, 0x00, 0x00, - 0x00, 0x08, 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, - 0x01, 0x00, 0x01, 0x00 }; -static u8 actl_10[] VAR16 = { - 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x14, 0x07, - 0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f, - 0x01, 0x00, 0x0f, 0x00 }; -static u8 crtc_11[] VAR16 = { - 0x5f, 0x4f, 0x50, 0x82, 0x54, 0x80, 0x0b, 0x3e, - 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0xea, 0x8c, 0xdf, 0x28, 0x00, 0xe7, 0x04, 0xe3, - 0xff }; -static u8 actl_11[] VAR16 = { - 0x00, 0x3f, 0x00, 0x3f, 0x00, 0x3f, 0x00, 0x3f, - 0x00, 0x3f, 0x00, 0x3f, 0x00, 0x3f, 0x00, 0x3f, - 0x01, 0x00, 0x0f, 0x00 }; -static u8 sequ_13[] VAR16 = { 0x01, 0x0f, 0x00, 0x0e }; -static u8 crtc_13[] VAR16 = { - 0x5f, 0x4f, 0x50, 0x82, 0x54, 0x80, 0xbf, 0x1f, - 0x00, 0x41, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x9c, 0x8e, 0x8f, 0x28, 0x40, 0x96, 0xb9, 0xa3, - 0xff }; -static u8 actl_13[] VAR16 = { - 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, - 0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, - 0x41, 0x00, 0x0f, 0x00 }; -static u8 grdc_13[] VAR16 = { - 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0f, 0xff }; -static u8 crtc_6A[] VAR16 = { - 0x7f, 0x63, 0x63, 0x83, 0x6b, 0x1b, 0x72, 0xf0, - 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x59, 0x8d, 0x57, 0x32, 0x00, 0x57, 0x73, 0xe3, - 0xff }; - -#define PAL(x) x, sizeof(x) - -struct stdvga_mode_s { - u16 mode; - struct vgamode_s info; - - u8 pelmask; - u8 *dac; - u16 dacsize; - u8 *sequ_regs; - u8 miscreg; - u8 *crtc_regs; - u8 *actl_regs; - u8 *grdc_regs; -}; - -static struct stdvga_mode_s vga_modes[] VAR16 = { - //mode { model tx ty bpp cw ch sstart } - // pelm dac sequ misc crtc actl grdc - {0x00, { MM_TEXT, 40, 25, 4, 9, 16, SEG_CTEXT } - , 0xFF, PAL(palette2), sequ_01, 0x67, crtc_01, actl_01, grdc_01}, - {0x01, { MM_TEXT, 40, 25, 4, 9, 16, SEG_CTEXT } - , 0xFF, PAL(palette2), sequ_01, 0x67, crtc_01, actl_01, grdc_01}, - {0x02, { MM_TEXT, 80, 25, 4, 9, 16, SEG_CTEXT } - , 0xFF, PAL(palette2), sequ_03, 0x67, crtc_03, actl_01, grdc_01}, - {0x03, { MM_TEXT, 80, 25, 4, 9, 16, SEG_CTEXT } - , 0xFF, PAL(palette2), sequ_03, 0x67, crtc_03, actl_01, grdc_01}, - {0x04, { MM_CGA, 320, 200, 2, 8, 8, SEG_CTEXT } - , 0xFF, PAL(palette1), sequ_04, 0x63, crtc_04, actl_04, grdc_04}, - {0x05, { MM_CGA, 320, 200, 2, 8, 8, SEG_CTEXT } - , 0xFF, PAL(palette1), sequ_04, 0x63, crtc_04, actl_04, grdc_04}, - {0x06, { MM_CGA, 640, 200, 1, 8, 8, SEG_CTEXT } - , 0xFF, PAL(palette1), sequ_06, 0x63, crtc_06, actl_06, grdc_06}, - {0x07, { MM_TEXT, 80, 25, 4, 9, 16, SEG_MTEXT } - , 0xFF, PAL(palette0), sequ_03, 0x66, crtc_07, actl_07, grdc_07}, - {0x0D, { MM_PLANAR, 320, 200, 4, 8, 8, SEG_GRAPH } - , 0xFF, PAL(palette1), sequ_0d, 0x63, crtc_0d, actl_0d, grdc_0d}, - {0x0E, { MM_PLANAR, 640, 200, 4, 8, 8, SEG_GRAPH } - , 0xFF, PAL(palette1), sequ_0e, 0x63, crtc_0e, actl_0d, grdc_0d}, - {0x0F, { MM_PLANAR, 640, 350, 1, 8, 14, SEG_GRAPH } - , 0xFF, PAL(palette0), sequ_0e, 0xa3, crtc_0f, actl_0f, grdc_0d}, - {0x10, { MM_PLANAR, 640, 350, 4, 8, 14, SEG_GRAPH } - , 0xFF, PAL(palette2), sequ_0e, 0xa3, crtc_0f, actl_10, grdc_0d}, - {0x11, { MM_PLANAR, 640, 480, 1, 8, 16, SEG_GRAPH } - , 0xFF, PAL(palette2), sequ_0e, 0xe3, crtc_11, actl_11, grdc_0d}, - {0x12, { MM_PLANAR, 640, 480, 4, 8, 16, SEG_GRAPH } - , 0xFF, PAL(palette2), sequ_0e, 0xe3, crtc_11, actl_10, grdc_0d}, - {0x13, { MM_PACKED, 320, 200, 8, 8, 8, SEG_GRAPH } - , 0xFF, PAL(palette3), sequ_13, 0x63, crtc_13, actl_13, grdc_13}, - {0x6A, { MM_PLANAR, 800, 600, 4, 8, 16, SEG_GRAPH } - , 0xFF, PAL(palette2), sequ_0e, 0xe3, crtc_6A, actl_10, grdc_0d}, -}; - - -/**************************************************************** - * Mode functions - ****************************************************************/ - -static int -is_stdvga_mode(struct vgamode_s *vmode_g) -{ - return (vmode_g >= &vga_modes[0].info - && vmode_g <= &vga_modes[ARRAY_SIZE(vga_modes)-1].info); -} - -struct vgamode_s * -stdvga_find_mode(int mode) -{ - int i; - for (i = 0; i < ARRAY_SIZE(vga_modes); i++) { - struct stdvga_mode_s *stdmode_g = &vga_modes[i]; - if (GET_GLOBAL(stdmode_g->mode) == mode) - return &stdmode_g->info; - } - return NULL; -} - -void -stdvga_list_modes(u16 seg, u16 *dest, u16 *last) -{ - int i; - for (i = 0; i < ARRAY_SIZE(vga_modes) && dest < last; i++) { - struct stdvga_mode_s *stdmode_g = &vga_modes[i]; - u16 mode = GET_GLOBAL(stdmode_g->mode); - if (mode == 0xffff) - continue; - SET_FARVAR(seg, *dest, mode); - dest++; - } - - SET_FARVAR(seg, *dest, 0xffff); -} - -static struct video_save_pointer_s video_save_pointer_table VAR16; - -static struct video_param_s video_param_table[29] VAR16; - -void -stdvga_build_video_param(void) -{ - SET_BDA(video_savetable - , SEGOFF(get_global_seg(), (u32)&video_save_pointer_table)); - SET_VGA(video_save_pointer_table.videoparam - , SEGOFF(get_global_seg(), (u32)video_param_table)); - - static u8 parammodes[] VAR16 = { - 0, 0, 0, 0, 0x04, 0x05, 0x06, 0x07, - 0, 0, 0, 0, 0, 0x0d, 0x0e, 0, - 0, 0x0f, 0x10, 0, 0, 0, 0, 0x01, - 0x03, 0x07, 0x11, 0x12, 0x13 - }; - - int i; - for (i=0; i<ARRAY_SIZE(parammodes); i++) { - int mode = GET_GLOBAL(parammodes[i]); - if (! mode) - continue; - struct video_param_s *vparam_g = &video_param_table[i]; - struct vgamode_s *vmode_g = stdvga_find_mode(mode); - if (!vmode_g) - continue; - int width = GET_GLOBAL(vmode_g->width); - int height = GET_GLOBAL(vmode_g->height); - u8 memmodel = GET_GLOBAL(vmode_g->memmodel); - int cheight = GET_GLOBAL(vmode_g->cheight); - if (memmodel == MM_TEXT) { - SET_VGA(vparam_g->twidth, width); - SET_VGA(vparam_g->theightm1, height-1); - } else { - int cwidth = GET_GLOBAL(vmode_g->cwidth); - SET_VGA(vparam_g->twidth, width / cwidth); - SET_VGA(vparam_g->theightm1, (height / cheight) - 1); - } - SET_VGA(vparam_g->cheight, cheight); - SET_VGA(vparam_g->slength, calc_page_size(memmodel, width, height)); - struct stdvga_mode_s *stdmode_g = container_of( - vmode_g, struct stdvga_mode_s, info); - memcpy_far(get_global_seg(), vparam_g->sequ_regs - , get_global_seg(), GET_GLOBAL(stdmode_g->sequ_regs) - , ARRAY_SIZE(vparam_g->sequ_regs)); - SET_VGA(vparam_g->miscreg, GET_GLOBAL(stdmode_g->miscreg)); - memcpy_far(get_global_seg(), vparam_g->crtc_regs - , get_global_seg(), GET_GLOBAL(stdmode_g->crtc_regs) - , ARRAY_SIZE(vparam_g->crtc_regs)); - memcpy_far(get_global_seg(), vparam_g->actl_regs - , get_global_seg(), GET_GLOBAL(stdmode_g->actl_regs) - , ARRAY_SIZE(vparam_g->actl_regs)); - memcpy_far(get_global_seg(), vparam_g->grdc_regs - , get_global_seg(), GET_GLOBAL(stdmode_g->grdc_regs) - , ARRAY_SIZE(vparam_g->grdc_regs)); - } - - // Fill available legacy modes in video_func_static table - u32 modes = 0; - for (i = 0; i < ARRAY_SIZE(vga_modes); i++) { - u16 mode = vga_modes[i].mode; - if (mode <= 0x13) - modes |= 1<<i; - } - SET_VGA(static_functionality.modes, modes); -} - -void -stdvga_override_crtc(int mode, u8 *crtc) -{ - struct vgamode_s *vmode_g = stdvga_find_mode(mode); - if (!vmode_g) - return; - struct stdvga_mode_s *stdmode_g = container_of( - vmode_g, struct stdvga_mode_s, info); - SET_VGA(stdmode_g->crtc_regs, crtc); -} - -static void -clear_screen(struct vgamode_s *vmode_g) -{ - switch (GET_GLOBAL(vmode_g->memmodel)) { - case MM_TEXT: - memset16_far(GET_GLOBAL(vmode_g->sstart), 0, 0x0720, 32*1024); - break; - case MM_CGA: - memset16_far(GET_GLOBAL(vmode_g->sstart), 0, 0x0000, 32*1024); - break; - default: - // XXX - old code gets/sets/restores sequ register 2 to 0xf - - // but it should always be 0xf anyway. - memset16_far(GET_GLOBAL(vmode_g->sstart), 0, 0x0000, 64*1024); - } -} - -int -stdvga_set_mode(struct vgamode_s *vmode_g, int flags) -{ - if (! is_stdvga_mode(vmode_g)) { - warn_internalerror(); - return -1; - } - struct stdvga_mode_s *stdmode_g = container_of( - vmode_g, struct stdvga_mode_s, info); - - // if palette loading (bit 3 of modeset ctl = 0) - if (!(flags & MF_NOPALETTE)) { // Set the PEL mask - stdvga_pelmask_write(GET_GLOBAL(stdmode_g->pelmask)); - - // From which palette - u8 *palette_g = GET_GLOBAL(stdmode_g->dac); - u16 palsize = GET_GLOBAL(stdmode_g->dacsize) / 3; - - // Always 256*3 values - stdvga_dac_write(get_global_seg(), palette_g, 0, palsize); - int i; - for (i = palsize; i < 0x0100; i++) { - static u8 rgb[3] VAR16; - stdvga_dac_write(get_global_seg(), rgb, i, 1); - } - - if (flags & MF_GRAYSUM) - stdvga_perform_gray_scale_summing(0x00, 0x100); - } - - // Set Attribute Ctl - u8 *regs = GET_GLOBAL(stdmode_g->actl_regs); - int i; - for (i = 0; i <= 0x13; i++) - stdvga_attr_write(i, GET_GLOBAL(regs[i])); - stdvga_attr_write(0x14, 0x00); - - // Set Sequencer Ctl - stdvga_sequ_write(0x00, 0x03); - regs = GET_GLOBAL(stdmode_g->sequ_regs); - for (i = 1; i <= 4; i++) - stdvga_sequ_write(i, GET_GLOBAL(regs[i - 1])); - - // Set Grafx Ctl - regs = GET_GLOBAL(stdmode_g->grdc_regs); - for (i = 0; i <= 8; i++) - stdvga_grdc_write(i, GET_GLOBAL(regs[i])); - - // Set CRTC address VGA or MDA - u8 miscreg = GET_GLOBAL(stdmode_g->miscreg); - u16 crtc_addr = VGAREG_VGA_CRTC_ADDRESS; - if (!(miscreg & 1)) - crtc_addr = VGAREG_MDA_CRTC_ADDRESS; - - // Disable CRTC write protection - stdvga_crtc_write(crtc_addr, 0x11, 0x00); - // Set CRTC regs - regs = GET_GLOBAL(stdmode_g->crtc_regs); - for (i = 0; i <= 0x18; i++) - stdvga_crtc_write(crtc_addr, i, GET_GLOBAL(regs[i])); - - // Set the misc register - stdvga_misc_write(miscreg); - - // Enable video - stdvga_attrindex_write(0x20); - - // Clear screen - if (!(flags & MF_NOCLEARMEM)) - clear_screen(vmode_g); - - // Write the fonts in memory - u8 memmodel = GET_GLOBAL(vmode_g->memmodel); - if (memmodel == MM_TEXT) - stdvga_load_font(get_global_seg(), vgafont16, 0x100, 0, 0, 16); - - return 0; -} - -// Load the standard palette associated with 8bpp packed pixel vga modes. -void -stdvga_set_packed_palette(void) -{ - stdvga_dac_write(get_global_seg(), palette3, 0, sizeof(palette3) / 3); -} diff --git a/payloads/external/SeaBIOS/vgasrc/svgamodes.c b/payloads/external/SeaBIOS/vgasrc/svgamodes.c deleted file mode 100644 index 6e494c71..00000000 --- a/payloads/external/SeaBIOS/vgasrc/svgamodes.c +++ /dev/null @@ -1,96 +0,0 @@ -// Common svga mode definitions -// -// Copyright (C) 2012 Kevin O'Connor <kevin@koconnor.net> -// Copyright (C) 2011 Julian Pidancet <julian.pidancet@citrix.com> -// Copyright (C) 2002 Jeroen Janssen -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "stdvga.h" // SEG_GRAPH -#include "vgabios.h" // VAR16 - -#include "svgamodes.h" - -struct generic_svga_mode svga_modes[] VAR16 = { - /* standard modes */ - { 0x100, { MM_PACKED, 640, 400, 8, 8, 16, SEG_GRAPH } }, - { 0x101, { MM_PACKED, 640, 480, 8, 8, 16, SEG_GRAPH } }, - { 0x102, { MM_PLANAR, 800, 600, 4, 8, 16, SEG_GRAPH } }, - { 0x103, { MM_PACKED, 800, 600, 8, 8, 16, SEG_GRAPH } }, - { 0x104, { MM_PLANAR, 1024, 768, 4, 8, 16, SEG_GRAPH } }, - { 0x105, { MM_PACKED, 1024, 768, 8, 8, 16, SEG_GRAPH } }, - { 0x106, { MM_PLANAR, 1280, 1024, 4, 8, 16, SEG_GRAPH } }, - { 0x107, { MM_PACKED, 1280, 1024, 8, 8, 16, SEG_GRAPH } }, - { 0x10D, { MM_DIRECT, 320, 200, 15, 8, 16, SEG_GRAPH } }, - { 0x10E, { MM_DIRECT, 320, 200, 16, 8, 16, SEG_GRAPH } }, - { 0x10F, { MM_DIRECT, 320, 200, 24, 8, 16, SEG_GRAPH } }, - { 0x110, { MM_DIRECT, 640, 480, 15, 8, 16, SEG_GRAPH } }, - { 0x111, { MM_DIRECT, 640, 480, 16, 8, 16, SEG_GRAPH } }, - { 0x112, { MM_DIRECT, 640, 480, 24, 8, 16, SEG_GRAPH } }, - { 0x113, { MM_DIRECT, 800, 600, 15, 8, 16, SEG_GRAPH } }, - { 0x114, { MM_DIRECT, 800, 600, 16, 8, 16, SEG_GRAPH } }, - { 0x115, { MM_DIRECT, 800, 600, 24, 8, 16, SEG_GRAPH } }, - { 0x116, { MM_DIRECT, 1024, 768, 15, 8, 16, SEG_GRAPH } }, - { 0x117, { MM_DIRECT, 1024, 768, 16, 8, 16, SEG_GRAPH } }, - { 0x118, { MM_DIRECT, 1024, 768, 24, 8, 16, SEG_GRAPH } }, - { 0x119, { MM_DIRECT, 1280, 1024, 15, 8, 16, SEG_GRAPH } }, - { 0x11A, { MM_DIRECT, 1280, 1024, 16, 8, 16, SEG_GRAPH } }, - { 0x11B, { MM_DIRECT, 1280, 1024, 24, 8, 16, SEG_GRAPH } }, - { 0x11C, { MM_PACKED, 1600, 1200, 8, 8, 16, SEG_GRAPH } }, - { 0x11D, { MM_DIRECT, 1600, 1200, 15, 8, 16, SEG_GRAPH } }, - { 0x11E, { MM_DIRECT, 1600, 1200, 16, 8, 16, SEG_GRAPH } }, - { 0x11F, { MM_DIRECT, 1600, 1200, 24, 8, 16, SEG_GRAPH } }, - /* other modes */ - { 0x140, { MM_DIRECT, 320, 200, 32, 8, 16, SEG_GRAPH } }, - { 0x141, { MM_DIRECT, 640, 400, 32, 8, 16, SEG_GRAPH } }, - { 0x142, { MM_DIRECT, 640, 480, 32, 8, 16, SEG_GRAPH } }, - { 0x143, { MM_DIRECT, 800, 600, 32, 8, 16, SEG_GRAPH } }, - { 0x144, { MM_DIRECT, 1024, 768, 32, 8, 16, SEG_GRAPH } }, - { 0x145, { MM_DIRECT, 1280, 1024, 32, 8, 16, SEG_GRAPH } }, - { 0x146, { MM_PACKED, 320, 200, 8, 8, 16, SEG_GRAPH } }, - { 0x147, { MM_DIRECT, 1600, 1200, 32, 8, 16, SEG_GRAPH } }, - { 0x148, { MM_PACKED, 1152, 864, 8, 8, 16, SEG_GRAPH } }, - { 0x149, { MM_DIRECT, 1152, 864, 15, 8, 16, SEG_GRAPH } }, - { 0x14a, { MM_DIRECT, 1152, 864, 16, 8, 16, SEG_GRAPH } }, - { 0x14b, { MM_DIRECT, 1152, 864, 24, 8, 16, SEG_GRAPH } }, - { 0x14c, { MM_DIRECT, 1152, 864, 32, 8, 16, SEG_GRAPH } }, - { 0x175, { MM_DIRECT, 1280, 768, 16, 8, 16, SEG_GRAPH } }, - { 0x176, { MM_DIRECT, 1280, 768, 24, 8, 16, SEG_GRAPH } }, - { 0x177, { MM_DIRECT, 1280, 768, 32, 8, 16, SEG_GRAPH } }, - { 0x178, { MM_DIRECT, 1280, 800, 16, 8, 16, SEG_GRAPH } }, - { 0x179, { MM_DIRECT, 1280, 800, 24, 8, 16, SEG_GRAPH } }, - { 0x17a, { MM_DIRECT, 1280, 800, 32, 8, 16, SEG_GRAPH } }, - { 0x17b, { MM_DIRECT, 1280, 960, 16, 8, 16, SEG_GRAPH } }, - { 0x17c, { MM_DIRECT, 1280, 960, 24, 8, 16, SEG_GRAPH } }, - { 0x17d, { MM_DIRECT, 1280, 960, 32, 8, 16, SEG_GRAPH } }, - { 0x17e, { MM_DIRECT, 1440, 900, 16, 8, 16, SEG_GRAPH } }, - { 0x17f, { MM_DIRECT, 1440, 900, 24, 8, 16, SEG_GRAPH } }, - { 0x180, { MM_DIRECT, 1440, 900, 32, 8, 16, SEG_GRAPH } }, - { 0x181, { MM_DIRECT, 1400, 1050, 16, 8, 16, SEG_GRAPH } }, - { 0x182, { MM_DIRECT, 1400, 1050, 24, 8, 16, SEG_GRAPH } }, - { 0x183, { MM_DIRECT, 1400, 1050, 32, 8, 16, SEG_GRAPH } }, - { 0x184, { MM_DIRECT, 1680, 1050, 16, 8, 16, SEG_GRAPH } }, - { 0x185, { MM_DIRECT, 1680, 1050, 24, 8, 16, SEG_GRAPH } }, - { 0x186, { MM_DIRECT, 1680, 1050, 32, 8, 16, SEG_GRAPH } }, - { 0x187, { MM_DIRECT, 1920, 1200, 16, 8, 16, SEG_GRAPH } }, - { 0x188, { MM_DIRECT, 1920, 1200, 24, 8, 16, SEG_GRAPH } }, - { 0x189, { MM_DIRECT, 1920, 1200, 32, 8, 16, SEG_GRAPH } }, - { 0x18a, { MM_DIRECT, 2560, 1600, 16, 8, 16, SEG_GRAPH } }, - { 0x18b, { MM_DIRECT, 2560, 1600, 24, 8, 16, SEG_GRAPH } }, - { 0x18c, { MM_DIRECT, 2560, 1600, 32, 8, 16, SEG_GRAPH } }, - { 0x18d, { MM_DIRECT, 1280, 720, 16, 8, 16, SEG_GRAPH } }, - { 0x18e, { MM_DIRECT, 1280, 720, 24, 8, 16, SEG_GRAPH } }, - { 0x18f, { MM_DIRECT, 1280, 720, 32, 8, 16, SEG_GRAPH } }, - { 0x190, { MM_DIRECT, 1920, 1080, 16, 8, 16, SEG_GRAPH } }, - { 0x191, { MM_DIRECT, 1920, 1080, 24, 8, 16, SEG_GRAPH } }, - { 0x192, { MM_DIRECT, 1920, 1080, 32, 8, 16, SEG_GRAPH } }, - - /* custom resolutions for 16:9 displays */ - { 0x193, { MM_DIRECT, 1600, 900, 16, 8, 16, SEG_GRAPH } }, - { 0x194, { MM_DIRECT, 1600, 900, 24, 8, 16, SEG_GRAPH } }, - { 0x195, { MM_DIRECT, 1600, 900, 32, 8, 16, SEG_GRAPH } }, - { 0x196, { MM_DIRECT, 2560, 1440, 16, 8, 16, SEG_GRAPH } }, - { 0x197, { MM_DIRECT, 2560, 1440, 24, 8, 16, SEG_GRAPH } }, - { 0x198, { MM_DIRECT, 2560, 1440, 32, 8, 16, SEG_GRAPH } }, -}; -unsigned int svga_mcount VAR16 = ARRAY_SIZE(svga_modes); diff --git a/payloads/external/SeaBIOS/vgasrc/svgamodes.h b/payloads/external/SeaBIOS/vgasrc/svgamodes.h deleted file mode 100644 index 782d30b9..00000000 --- a/payloads/external/SeaBIOS/vgasrc/svgamodes.h +++ /dev/null @@ -1,12 +0,0 @@ -#ifndef __SVGAMODES_H -#define __SVGAMODES_H - -struct generic_svga_mode { - u16 mode; - struct vgamode_s info; -}; - -extern struct generic_svga_mode svga_modes[] VAR16; -extern unsigned int svga_mcount VAR16; - -#endif /* __SVGAMODES_H */ diff --git a/payloads/external/SeaBIOS/vgasrc/swcursor.c b/payloads/external/SeaBIOS/vgasrc/swcursor.c deleted file mode 100644 index f2212d5a..00000000 --- a/payloads/external/SeaBIOS/vgasrc/swcursor.c +++ /dev/null @@ -1,96 +0,0 @@ -// Virtual software based cursor support -// -// Copyright (C) 2014-2016 Kevin O'Connor <kevin@koconnor.net> -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "biosvar.h" // GET_BDA -#include "bregs.h" // struct bregs -#include "vgabios.h" // get_cursor_pos -#include "vgafb.h" // handle_gfx_op -#include "vgautil.h" // swcursor_check_event - -// Draw/undraw a cursor on the framebuffer by xor'ing the cursor cell -static void -gfx_set_swcursor(struct vgamode_s *vmode_g, int enable, struct cursorpos cp) -{ - u16 cursor_type = get_cursor_shape(); - u8 start = cursor_type >> 8, end = cursor_type & 0xff; - struct gfx_op op; - init_gfx_op(&op, vmode_g); - op.x = cp.x * 8; - int cheight = GET_BDA(char_height); - op.y = cp.y * cheight + start; - - int i; - for (i = start; i < cheight && i <= end; i++, op.y++) { - op.op = GO_READ8; - handle_gfx_op(&op); - int j; - for (j = 0; j < 8; j++) - op.pixels[j] ^= 0x07; - op.op = GO_WRITE8; - handle_gfx_op(&op); - } -} - -// Draw/undraw a cursor on the screen -static void -set_swcursor(int enable) -{ - u8 flags = GET_BDA_EXT(flags); - if (!!(flags & BF_SWCURSOR) == enable) - // Already in requested mode. - return; - struct vgamode_s *vmode_g = get_current_mode(); - if (!vmode_g) - return; - struct cursorpos cp = get_cursor_pos(GET_BDA(video_page)); - if (cp.x >= GET_BDA(video_cols) || cp.y > GET_BDA(video_rows) - || GET_BDA(cursor_type) >= 0x2000) - // Cursor not visible - return; - - SET_BDA_EXT(flags, (flags & ~BF_SWCURSOR) | (enable ? BF_SWCURSOR : 0)); - - if (GET_GLOBAL(vmode_g->memmodel) != MM_TEXT) { - gfx_set_swcursor(vmode_g, enable, cp); - return; - } - - // In text mode, swap foreground and background attributes for cursor - void *dest_far = text_address(cp) + 1; - u8 attr = GET_FARVAR(GET_GLOBAL(vmode_g->sstart), *(u8*)dest_far); - attr = (attr >> 4) | (attr << 4); - SET_FARVAR(GET_GLOBAL(vmode_g->sstart), *(u8*)dest_far, attr); -} - -// Disable virtual cursor if a vgabios call accesses the framebuffer -void -swcursor_pre_handle10(struct bregs *regs) -{ - if (!vga_emulate_text()) - return; - switch (regs->ah) { - case 0x4f: - if (!CONFIG_VGA_VBE || regs->al != 0x02) - break; - // NO BREAK - case 0x00 ... 0x02: - case 0x05 ... 0x0e: - case 0x13: - set_swcursor(0); - break; - default: - break; - } -} - -// Called by periodic (18.2hz) timer -void -swcursor_check_event(void) -{ - if (!vga_emulate_text()) - return; - set_swcursor(GET_BDA(timer_counter) % 18 < 9); -} diff --git a/payloads/external/SeaBIOS/vgasrc/vbe.c b/payloads/external/SeaBIOS/vgasrc/vbe.c deleted file mode 100644 index 66afb011..00000000 --- a/payloads/external/SeaBIOS/vgasrc/vbe.c +++ /dev/null @@ -1,462 +0,0 @@ -// Video Bios Extensions handlers -// -// Copyright (C) 2012 Kevin O'Connor <kevin@koconnor.net> -// Copyright (C) 2011 Julian Pidancet <julian.pidancet@citrix.com> -// Copyright (C) 2001-2008 the LGPL VGABios developers Team -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "biosvar.h" // GET_GLOBAL -#include "bregs.h" // struct bregs -#include "config.h" // CONFIG_* -#include "output.h" // dprintf -#include "std/vbe.h" // struct vbe_info -#include "string.h" // memset_far -#include "vgabios.h" // get_current_mode -#include "vgahw.h" // vgahw_set_mode -#include "vgautil.h" // handle_104f - -#define VBE_OEM_STRING "SeaBIOS VBE(C) 2011" -#define VBE_VENDOR_STRING "SeaBIOS Developers" -#define VBE_PRODUCT_STRING "SeaBIOS VBE Adapter" -#define VBE_REVISION_STRING "Rev. 1" - -u32 VBE_total_memory VAR16 = 256 * 1024; -u32 VBE_capabilities VAR16; -u32 VBE_framebuffer VAR16; -u16 VBE_win_granularity VAR16; -u8 VBE_edid[256] VAR16; - -static void -vbe_104f00(struct bregs *regs) -{ - u16 seg = regs->es; - struct vbe_info *info = (void*)(regs->di+0); - - if (GET_FARVAR(seg, info->signature) == VBE2_SIGNATURE) { - dprintf(4, "Get VBE Controller: VBE2 Signature found\n"); - } else if (GET_FARVAR(seg, info->signature) == VESA_SIGNATURE) { - dprintf(4, "Get VBE Controller: VESA Signature found\n"); - } else { - dprintf(4, "Get VBE Controller: Invalid Signature\n"); - } - - memset_far(seg, info, 0, sizeof(*info)); - - SET_FARVAR(seg, info->signature, VESA_SIGNATURE); - - SET_FARVAR(seg, info->version, 0x0300); - - SET_FARVAR(seg, info->oem_string, - SEGOFF(get_global_seg(), (u32)VBE_OEM_STRING)); - SET_FARVAR(seg, info->capabilities, GET_GLOBAL(VBE_capabilities)); - - /* We generate our mode list in the reserved field of the info block */ - u16 *destmode = (void*)info->reserved; - SET_FARVAR(seg, info->video_mode, SEGOFF(seg, (u32)destmode)); - - /* Total memory (in 64k blocks) */ - SET_FARVAR(seg, info->total_memory - , GET_GLOBAL(VBE_total_memory) / (64*1024)); - - SET_FARVAR(seg, info->oem_vendor_string, - SEGOFF(get_global_seg(), (u32)VBE_VENDOR_STRING)); - SET_FARVAR(seg, info->oem_product_string, - SEGOFF(get_global_seg(), (u32)VBE_PRODUCT_STRING)); - SET_FARVAR(seg, info->oem_revision_string, - SEGOFF(get_global_seg(), (u32)VBE_REVISION_STRING)); - - /* Fill list of modes */ - u16 *last = (void*)&info->reserved[sizeof(info->reserved)]; - vgahw_list_modes(seg, destmode, last - 1); - - regs->ax = 0x004f; -} - -static void -vbe_104f01(struct bregs *regs) -{ - u16 seg = regs->es; - struct vbe_mode_info *info = (void*)(regs->di+0); - u16 mode = regs->cx; - - dprintf(1, "VBE mode info request: %x\n", mode); - - struct vgamode_s *vmode_g = vgahw_find_mode(mode & ~MF_VBEFLAGS); - if (! vmode_g) { - dprintf(1, "VBE mode %x not found\n", mode); - regs->ax = 0x014f; - return; - } - - memset_far(seg, info, 0, sizeof(*info)); - - // Basic information about video controller. - u32 win_granularity = GET_GLOBAL(VBE_win_granularity); - SET_FARVAR(seg, info->winA_attributes, - (win_granularity ? VBE_WINDOW_ATTRIBUTE_RELOCATABLE : 0) | - VBE_WINDOW_ATTRIBUTE_READABLE | - VBE_WINDOW_ATTRIBUTE_WRITEABLE); - SET_FARVAR(seg, info->winB_attributes, 0); - SET_FARVAR(seg, info->win_granularity, win_granularity); - SET_FARVAR(seg, info->win_size, 64); /* Bank size 64K */ - SET_FARVAR(seg, info->winA_seg, GET_GLOBAL(vmode_g->sstart)); - SET_FARVAR(seg, info->winB_seg, 0x0); - extern void entry_104f05(void); - SET_FARVAR(seg, info->win_func_ptr - , SEGOFF(get_global_seg(), (u32)entry_104f05)); - // Basic information about mode. - int width = GET_GLOBAL(vmode_g->width); - int height = GET_GLOBAL(vmode_g->height); - int linesize = vgahw_get_linesize(vmode_g); - SET_FARVAR(seg, info->bytes_per_scanline, linesize); - SET_FARVAR(seg, info->xres, width); - SET_FARVAR(seg, info->yres, height); - SET_FARVAR(seg, info->xcharsize, GET_GLOBAL(vmode_g->cwidth)); - SET_FARVAR(seg, info->ycharsize, GET_GLOBAL(vmode_g->cheight)); - int depth = GET_GLOBAL(vmode_g->depth); - SET_FARVAR(seg, info->bits_per_pixel, depth); - u8 memmodel = GET_GLOBAL(vmode_g->memmodel); - SET_FARVAR(seg, info->mem_model, memmodel); - SET_FARVAR(seg, info->reserved0, 1); - - // Mode specific info. - u16 mode_attr = VBE_MODE_ATTRIBUTE_SUPPORTED | - VBE_MODE_ATTRIBUTE_EXTENDED_INFORMATION_AVAILABLE | - VBE_MODE_ATTRIBUTE_COLOR_MODE | - VBE_MODE_ATTRIBUTE_GRAPHICS_MODE | - VBE_MODE_ATTRIBUTE_NOT_VGA_COMPATIBLE; - u32 framebuffer = 0; - int planes = 1, banks = 1; - u32 pages = GET_GLOBAL(VBE_total_memory) / ALIGN(height * linesize, 64*1024); - switch (memmodel) { - case MM_TEXT: - mode_attr &= ~VBE_MODE_ATTRIBUTE_GRAPHICS_MODE; - mode_attr |= VBE_MODE_ATTRIBUTE_TTY_BIOS_SUPPORT; - if (GET_GLOBAL(vmode_g->sstart) == SEG_MTEXT) - mode_attr &= ~VBE_MODE_ATTRIBUTE_COLOR_MODE; - pages = 1; - break; - case MM_CGA: - pages = 1; - banks = 2; - SET_FARVAR(seg, info->bank_size, 8); - break; - case MM_PLANAR: - planes = 4; - pages /= 4; - break; - default: - framebuffer = GET_GLOBAL(VBE_framebuffer); - if (framebuffer) - mode_attr |= VBE_MODE_ATTRIBUTE_LINEAR_FRAME_BUFFER_MODE; - break; - } - if (pages > 128) - pages = 128; - if (pages < 2) - pages++; - SET_FARVAR(seg, info->mode_attributes, mode_attr); - SET_FARVAR(seg, info->planes, planes); - SET_FARVAR(seg, info->pages, pages - 1); - SET_FARVAR(seg, info->banks, banks); - - // Pixel color breakdown - u8 r_size, r_pos, g_size, g_pos, b_size, b_pos, a_size, a_pos; - switch (depth) { - case 15: r_size = 5; r_pos = 10; g_size = 5; g_pos = 5; - b_size = 5; b_pos = 0; a_size = 1; a_pos = 15; break; - case 16: r_size = 5; r_pos = 11; g_size = 6; g_pos = 5; - b_size = 5; b_pos = 0; a_size = 0; a_pos = 0; break; - case 24: r_size = 8; r_pos = 16; g_size = 8; g_pos = 8; - b_size = 8; b_pos = 0; a_size = 0; a_pos = 0; break; - case 32: r_size = 8; r_pos = 16; g_size = 8; g_pos = 8; - b_size = 8; b_pos = 0; a_size = 8; a_pos = 24; - SET_FARVAR(seg, info->directcolor_info, - VBE_DIRECTCOLOR_RESERVED_BITS_AVAILABLE); - break; - default: r_size = 0; r_pos = 0; g_size = 0; g_pos = 0; - b_size = 0; b_pos = 0; a_size = 0; a_pos = 0; break; - } - SET_FARVAR(seg, info->red_size, r_size); - SET_FARVAR(seg, info->red_pos, r_pos); - SET_FARVAR(seg, info->green_size, g_size); - SET_FARVAR(seg, info->green_pos, g_pos); - SET_FARVAR(seg, info->blue_size, b_size); - SET_FARVAR(seg, info->blue_pos, b_pos); - SET_FARVAR(seg, info->alpha_size, a_size); - SET_FARVAR(seg, info->alpha_pos, a_pos); - - // Linear framebuffer info. - if (framebuffer) { - SET_FARVAR(seg, info->phys_base, framebuffer); - - SET_FARVAR(seg, info->reserved1, 0); - SET_FARVAR(seg, info->reserved2, 0); - SET_FARVAR(seg, info->linear_bytes_per_scanline, linesize); - SET_FARVAR(seg, info->linear_pages, 0); - SET_FARVAR(seg, info->linear_red_size, r_size); - SET_FARVAR(seg, info->linear_red_pos, r_pos); - SET_FARVAR(seg, info->linear_green_size, g_size); - SET_FARVAR(seg, info->linear_green_pos, g_pos); - SET_FARVAR(seg, info->linear_blue_size, b_size); - SET_FARVAR(seg, info->linear_blue_pos, b_pos); - SET_FARVAR(seg, info->linear_alpha_size, a_size); - SET_FARVAR(seg, info->linear_alpha_pos, a_pos); - } - - regs->ax = 0x004f; -} - -static void -vbe_104f02(struct bregs *regs) -{ - dprintf(1, "VBE mode set: %x\n", regs->bx); - - int mode = regs->bx & ~MF_VBEFLAGS; - int flags = regs->bx & MF_VBEFLAGS; - int ret = vga_set_mode(mode, flags); - - regs->ah = ret; - regs->al = 0x4f; -} - -static void -vbe_104f03(struct bregs *regs) -{ - regs->bx = GET_BDA_EXT(vbe_mode); - dprintf(1, "VBE current mode=%x\n", regs->bx); - regs->ax = 0x004f; -} - -static void -vbe_104f04(struct bregs *regs) -{ - u16 seg = regs->es; - void *data = (void*)(regs->bx+0); - u16 states = regs->cx; - u8 cmd = regs->dl; - if (states & ~0x0f || cmd > 2) - goto fail; - int ret = vgahw_save_restore(states | (cmd<<8), seg, data); - if (ret < 0) - goto fail; - if (cmd == 0) - regs->bx = ret / 64; - regs->ax = 0x004f; - return; -fail: - regs->ax = 0x014f; -} - -void VISIBLE16 -vbe_104f05(struct bregs *regs) -{ - if (regs->bh > 1 || regs->bl > 1) - goto fail; - if (GET_BDA_EXT(vbe_mode) & MF_LINEARFB) { - regs->ah = VBE_RETURN_STATUS_INVALID; - return; - } - struct vgamode_s *vmode_g = get_current_mode(); - if (! vmode_g) - goto fail; - if (regs->bh) { - int ret = vgahw_get_window(vmode_g, regs->bl); - if (ret < 0) - goto fail; - regs->dx = ret; - regs->ax = 0x004f; - return; - } - int ret = vgahw_set_window(vmode_g, regs->bl, regs->dx); - if (ret) - goto fail; - regs->ax = 0x004f; - return; -fail: - regs->ax = 0x014f; -} - -static void -vbe_104f06(struct bregs *regs) -{ - if (regs->bl > 0x02) - goto fail; - struct vgamode_s *vmode_g = get_current_mode(); - if (! vmode_g) - goto fail; - int bpp = vga_bpp(vmode_g); - - if (regs->bl == 0x00) { - int ret = vgahw_set_linelength(vmode_g, DIV_ROUND_UP(regs->cx * bpp, 8)); - if (ret) - goto fail; - } else if (regs->bl == 0x02) { - int ret = vgahw_set_linelength(vmode_g, regs->cx); - if (ret) - goto fail; - } - int linelength = vgahw_get_linelength(vmode_g); - if (linelength < 0) - goto fail; - - regs->bx = linelength; - regs->cx = (linelength * 8) / bpp; - regs->dx = GET_GLOBAL(VBE_total_memory) / linelength; - regs->ax = 0x004f; - return; -fail: - regs->ax = 0x014f; -} - -static void -vbe_104f07(struct bregs *regs) -{ - struct vgamode_s *vmode_g = get_current_mode(); - if (! vmode_g) - goto fail; - int bpp = vga_bpp(vmode_g); - int linelength = vgahw_get_linelength(vmode_g); - if (linelength < 0) - goto fail; - - int ret; - switch (regs->bl) { - case 0x80: - case 0x00: - ret = vgahw_set_displaystart( - vmode_g, DIV_ROUND_UP(regs->cx * bpp, 8) + linelength * regs->dx); - if (ret) - goto fail; - break; - case 0x01: - ret = vgahw_get_displaystart(vmode_g); - if (ret < 0) - goto fail; - regs->dx = ret / linelength; - regs->cx = (ret % linelength) * 8 / bpp; - break; - default: - goto fail; - } - regs->ax = 0x004f; - return; -fail: - regs->ax = 0x014f; -} - -static void -vbe_104f08(struct bregs *regs) -{ - struct vgamode_s *vmode_g = get_current_mode(); - if (! vmode_g) - goto fail; - u8 memmodel = GET_GLOBAL(vmode_g->memmodel); - if (memmodel == MM_DIRECT || memmodel == MM_YUV) { - regs->ax = 0x034f; - return; - } - if (regs->bl > 1) - goto fail; - if (regs->bl == 0) { - int ret = vgahw_set_dacformat(vmode_g, regs->bh); - if (ret < 0) - goto fail; - } - int ret = vgahw_get_dacformat(vmode_g); - if (ret < 0) - goto fail; - regs->bh = ret; - regs->ax = 0x004f; - return; -fail: - regs->ax = 0x014f; -} - -static void -vbe_104f0a(struct bregs *regs) -{ - debug_stub(regs); - regs->ax = 0x0100; -} - -static void -vbe_104f10(struct bregs *regs) -{ - switch (regs->bl) { - case 0x00: - regs->bx = 0x0f30; - break; - case 0x01: - MASK_BDA_EXT(flags, BF_PM_MASK, regs->bh & BF_PM_MASK); - break; - case 0x02: - regs->bh = GET_BDA_EXT(flags) & BF_PM_MASK; - break; - default: - regs->ax = 0x014f; - return; - } - regs->ax = 0x004f; -} - -static void -vbe_104f15(struct bregs *regs) -{ - int offset; - - switch (regs->bl) { - case 0x00: - if (GET_GLOBAL(VBE_edid[0]) != 0x00 || - GET_GLOBAL(VBE_edid[1]) != 0xff) - goto err; - regs->bx = 0x0103; - break; - case 0x01: - offset = regs->dx * 128; - if (offset >= sizeof(VBE_edid)) - goto err; - memcpy_far(regs->es, (void*)(regs->di+0), - get_global_seg(), VBE_edid + offset, - 128); - break; - err: - default: - regs->ax = 0x014f; - return; - } - regs->ax = 0x004f; -} - -static void -vbe_104fXX(struct bregs *regs) -{ - debug_stub(regs); - regs->ax = 0x0100; -} - -void noinline -handle_104f(struct bregs *regs) -{ - if (!CONFIG_VGA_VBE) { - vbe_104fXX(regs); - return; - } - - switch (regs->al) { - case 0x00: vbe_104f00(regs); break; - case 0x01: vbe_104f01(regs); break; - case 0x02: vbe_104f02(regs); break; - case 0x03: vbe_104f03(regs); break; - case 0x04: vbe_104f04(regs); break; - case 0x05: vbe_104f05(regs); break; - case 0x06: vbe_104f06(regs); break; - case 0x07: vbe_104f07(regs); break; - case 0x08: vbe_104f08(regs); break; - case 0x0a: vbe_104f0a(regs); break; - case 0x10: vbe_104f10(regs); break; - case 0x15: vbe_104f15(regs); break; - default: vbe_104fXX(regs); break; - } -} diff --git a/payloads/external/SeaBIOS/vgasrc/vgabios.c b/payloads/external/SeaBIOS/vgasrc/vgabios.c deleted file mode 100644 index 198ee555..00000000 --- a/payloads/external/SeaBIOS/vgasrc/vgabios.c +++ /dev/null @@ -1,1130 +0,0 @@ -// VGA bios implementation -// -// Copyright (C) 2009-2013 Kevin O'Connor <kevin@koconnor.net> -// Copyright (C) 2001-2008 the LGPL VGABios developers Team -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "biosvar.h" // GET_BDA -#include "bregs.h" // struct bregs -#include "config.h" // CONFIG_* -#include "output.h" // dprintf -#include "std/vbe.h" // VBE_RETURN_STATUS_FAILED -#include "std/vga.h" // struct video_func_static -#include "stdvga.h" // stdvga_set_cursor_shape -#include "string.h" // memset_far -#include "vgabios.h" // calc_page_size -#include "vgafb.h" // vgafb_write_char -#include "vgahw.h" // vgahw_set_mode -#include "vgautil.h" // swcursor_pre_handle10 - - -/**************************************************************** - * Helper functions - ****************************************************************/ - -// Return the bits per pixel in system memory for a given mode. -int -vga_bpp(struct vgamode_s *vmode_g) -{ - switch (GET_GLOBAL(vmode_g->memmodel)) { - case MM_TEXT: - return 16; - case MM_PLANAR: - return 1; - } - u8 depth = GET_GLOBAL(vmode_g->depth); - if (depth > 8) - return ALIGN(depth, 8); - return depth; -} - -u16 -calc_page_size(u8 memmodel, u16 width, u16 height) -{ - switch (memmodel) { - case MM_TEXT: - return ALIGN(width * height * 2, 2*1024); - case MM_CGA: - return 16*1024; - default: - return ALIGN(width * height / 8, 8*1024); - } -} - -// Determine cursor shape (taking into account possible cursor scaling) -u16 -get_cursor_shape(void) -{ - u16 cursor_type = GET_BDA(cursor_type); - u8 emulate_cursor = (GET_BDA(video_ctl) & 1) == 0; - if (!emulate_cursor) - return cursor_type; - u8 start = (cursor_type >> 8) & 0x3f; - u8 end = cursor_type & 0x1f; - u16 cheight = GET_BDA(char_height); - if (cheight <= 8 || end >= 8 || start >= 0x20) - return cursor_type; - if (end != (start + 1)) - start = ((start + 1) * cheight / 8) - 1; - else - start = ((end + 1) * cheight / 8) - 2; - end = ((end + 1) * cheight / 8) - 1; - return (start << 8) | end; -} - -static void -set_cursor_shape(u16 cursor_type) -{ - SET_BDA(cursor_type, cursor_type); - if (CONFIG_VGA_STDVGA_PORTS) - stdvga_set_cursor_shape(get_cursor_shape()); -} - -static void -set_cursor_pos(struct cursorpos cp) -{ - if (cp.page > 7) - // Should not happen... - return; - - if (cp.page == GET_BDA(video_page)) { - // Update cursor in hardware - if (CONFIG_VGA_STDVGA_PORTS) - stdvga_set_cursor_pos((int)text_address(cp)); - } - - // Update BIOS cursor pos - SET_BDA(cursor_pos[cp.page], (cp.y << 8) | cp.x); -} - -struct cursorpos -get_cursor_pos(u8 page) -{ - if (page > 7) - return (struct cursorpos) { 0, 0, 0 }; - u16 xy = GET_BDA(cursor_pos[page]); - return (struct cursorpos) { xy, xy>>8, page }; -} - -static void -set_active_page(u8 page) -{ - if (page > 7) - return; - - // Get the mode - struct vgamode_s *vmode_g = get_current_mode(); - if (!vmode_g) - return; - - // Calculate memory address of start of page - struct cursorpos cp = {0, 0, page}; - int address = (int)text_address(cp); - vgahw_set_displaystart(vmode_g, address); - - // And change the BIOS page - SET_BDA(video_pagestart, address); - SET_BDA(video_page, page); - - dprintf(1, "Set active page %02x address %04x\n", page, address); - - // Display the cursor, now the page is active - set_cursor_pos(get_cursor_pos(page)); -} - -static void -set_scan_lines(u8 lines) -{ - stdvga_set_scan_lines(lines); - SET_BDA(char_height, lines); - u16 vde = stdvga_get_vde(); - u8 rows = vde / lines; - SET_BDA(video_rows, rows - 1); - u16 cols = GET_BDA(video_cols); - SET_BDA(video_pagesize, calc_page_size(MM_TEXT, cols, rows)); - if (lines == 8) - set_cursor_shape(0x0607); - else - set_cursor_shape(((lines - 3) << 8) | (lines - 2)); -} - - -/**************************************************************** - * Character writing - ****************************************************************/ - -// Write a character to the screen and calculate new cursor position. -static void -write_char(struct cursorpos *pcp, struct carattr ca) -{ - vgafb_write_char(*pcp, ca); - pcp->x++; - // Do we need to wrap ? - if (pcp->x == GET_BDA(video_cols)) { - pcp->x = 0; - pcp->y++; - } -} - -// Write a character to the screen at a given position. Implement -// special characters and scroll the screen if necessary. -static void -write_teletype(struct cursorpos *pcp, struct carattr ca) -{ - switch (ca.car) { - case 7: - //FIXME should beep - break; - case 8: - if (pcp->x > 0) - pcp->x--; - break; - case '\r': - pcp->x = 0; - break; - case '\n': - pcp->y++; - break; - default: - write_char(pcp, ca); - break; - } - - // Do we need to scroll ? - u16 nbrows = GET_BDA(video_rows); - if (pcp->y > nbrows) { - pcp->y--; - - struct cursorpos win = {0, 0, pcp->page}; - struct cursorpos winsize = {GET_BDA(video_cols), nbrows+1}; - struct carattr attr = {' ', 0, 0}; - vgafb_scroll(win, winsize, 1, attr); - } -} - - -/**************************************************************** - * Save and restore bda state - ****************************************************************/ - -struct saveBDAstate { - u8 bda_0x49[28]; - u8 bda_0x84[6]; - u16 vbe_mode; - struct segoff_s font0; - struct segoff_s font1; -}; - -int -bda_save_restore(int cmd, u16 seg, void *data) -{ - if (!(cmd & SR_BDA)) - return 0; - struct saveBDAstate *info = data; - if (cmd & SR_SAVE) { - memcpy_far(seg, info->bda_0x49, SEG_BDA, (void*)0x49 - , sizeof(info->bda_0x49)); - memcpy_far(seg, info->bda_0x84, SEG_BDA, (void*)0x84 - , sizeof(info->bda_0x84)); - SET_FARVAR(seg, info->vbe_mode, GET_BDA_EXT(vbe_mode)); - SET_FARVAR(seg, info->font0, GET_IVT(0x1f)); - SET_FARVAR(seg, info->font1, GET_IVT(0x43)); - } - if (cmd & SR_RESTORE) { - memcpy_far(SEG_BDA, (void*)0x49, seg, info->bda_0x49 - , sizeof(info->bda_0x49)); - memcpy_far(SEG_BDA, (void*)0x84, seg, info->bda_0x84 - , sizeof(info->bda_0x84)); - u16 vbe_mode = GET_FARVAR(seg, info->vbe_mode); - SET_BDA_EXT(vbe_mode, vbe_mode); - struct vgamode_s *vmode_g = vgahw_find_mode(vbe_mode & ~MF_VBEFLAGS); - SET_BDA_EXT(vgamode_offset, (u32)vmode_g); - SET_IVT(0x1f, GET_FARVAR(seg, info->font0)); - SET_IVT(0x43, GET_FARVAR(seg, info->font1)); - } - return sizeof(*info); -} - - -/**************************************************************** - * Mode setting - ****************************************************************/ - -struct vgamode_s * -get_current_mode(void) -{ - return (void*)(GET_BDA_EXT(vgamode_offset)+0); -} - -// Setup BDA after a mode switch. -int -vga_set_mode(int mode, int flags) -{ - dprintf(1, "set VGA mode %x\n", mode); - struct vgamode_s *vmode_g = vgahw_find_mode(mode); - if (!vmode_g) - return VBE_RETURN_STATUS_FAILED; - - int ret = vgahw_set_mode(vmode_g, flags); - if (ret) - return ret; - - // Set the BIOS mem - int width = GET_GLOBAL(vmode_g->width); - int height = GET_GLOBAL(vmode_g->height); - u8 memmodel = GET_GLOBAL(vmode_g->memmodel); - int cheight = GET_GLOBAL(vmode_g->cheight); - if (mode < 0x100) - SET_BDA(video_mode, mode); - else - SET_BDA(video_mode, 0xff); - SET_BDA_EXT(vbe_mode, mode | (flags & MF_VBEFLAGS)); - SET_BDA_EXT(vgamode_offset, (u32)vmode_g); - if (CONFIG_VGA_ALLOCATE_EXTRA_STACK) - // Disable extra stack if it appears a modern OS is in use. - // This works around bugs in some versions of Windows (Vista - // and possibly later) when the stack is in the e-segment. - MASK_BDA_EXT(flags, BF_EXTRA_STACK - , (flags & MF_LEGACY) ? BF_EXTRA_STACK : 0); - if (memmodel == MM_TEXT) { - SET_BDA(video_cols, width); - SET_BDA(video_rows, height-1); - SET_BDA(cursor_type, 0x0607); - } else { - int cwidth = GET_GLOBAL(vmode_g->cwidth); - SET_BDA(video_cols, width / cwidth); - SET_BDA(video_rows, (height / cheight) - 1); - SET_BDA(cursor_type, vga_emulate_text() ? 0x0607 : 0x0000); - } - SET_BDA(video_pagesize, calc_page_size(memmodel, width, height)); - SET_BDA(crtc_address, CONFIG_VGA_STDVGA_PORTS ? stdvga_get_crtc() : 0); - SET_BDA(char_height, cheight); - SET_BDA(video_ctl, 0x60 | (flags & MF_NOCLEARMEM ? 0x80 : 0x00)); - SET_BDA(video_switches, 0xF9); - SET_BDA(modeset_ctl, GET_BDA(modeset_ctl) & 0x7f); - int i; - for (i=0; i<8; i++) - SET_BDA(cursor_pos[i], 0x0000); - SET_BDA(video_pagestart, 0x0000); - SET_BDA(video_page, 0x00); - - // Set the ints 0x1F and 0x43 - SET_IVT(0x1f, SEGOFF(get_global_seg(), (u32)&vgafont8[128 * 8])); - - switch (cheight) { - case 8: - SET_IVT(0x43, SEGOFF(get_global_seg(), (u32)vgafont8)); - break; - case 14: - SET_IVT(0x43, SEGOFF(get_global_seg(), (u32)vgafont14)); - break; - case 16: - SET_IVT(0x43, SEGOFF(get_global_seg(), (u32)vgafont16)); - break; - } - - return 0; -} - - -/**************************************************************** - * VGA int 10 handler - ****************************************************************/ - -static void -handle_1000(struct bregs *regs) -{ - int mode = regs->al & 0x7f; - int flags = MF_LEGACY | (GET_BDA(modeset_ctl) & (MF_NOPALETTE|MF_GRAYSUM)); - if (regs->al & 0x80) - flags |= MF_NOCLEARMEM; - - // Set regs->al - if (mode > 7) - regs->al = 0x20; - else if (mode == 6) - regs->al = 0x3f; - else - regs->al = 0x30; - - vga_set_mode(mode, flags); -} - -static void -handle_1001(struct bregs *regs) -{ - set_cursor_shape(regs->cx); -} - -static void -handle_1002(struct bregs *regs) -{ - struct cursorpos cp = {regs->dl, regs->dh, regs->bh}; - set_cursor_pos(cp); -} - -static void -handle_1003(struct bregs *regs) -{ - regs->cx = GET_BDA(cursor_type); - struct cursorpos cp = get_cursor_pos(regs->bh); - regs->dl = cp.x; - regs->dh = cp.y; -} - -// Read light pen pos (unimplemented) -static void -handle_1004(struct bregs *regs) -{ - debug_stub(regs); - regs->ax = regs->bx = regs->cx = regs->dx = 0; -} - -static void -handle_1005(struct bregs *regs) -{ - set_active_page(regs->al); -} - -static void -verify_scroll(struct bregs *regs, int dir) -{ - // Verify parameters - u8 ulx = regs->cl, uly = regs->ch, lrx = regs->dl, lry = regs->dh; - u16 nbrows = GET_BDA(video_rows) + 1; - if (lry >= nbrows) - lry = nbrows - 1; - u16 nbcols = GET_BDA(video_cols); - if (lrx >= nbcols) - lrx = nbcols - 1; - int wincols = lrx - ulx + 1, winrows = lry - uly + 1; - if (wincols <= 0 || winrows <= 0) - return; - int lines = regs->al; - if (lines >= winrows) - lines = 0; - lines *= dir; - - // Scroll (or clear) window - struct cursorpos win = {ulx, uly, GET_BDA(video_page)}; - struct cursorpos winsize = {wincols, winrows}; - struct carattr attr = {' ', regs->bh, 1}; - vgafb_scroll(win, winsize, lines, attr); -} - -static void -handle_1006(struct bregs *regs) -{ - verify_scroll(regs, 1); -} - -static void -handle_1007(struct bregs *regs) -{ - verify_scroll(regs, -1); -} - -static void -handle_1008(struct bregs *regs) -{ - struct carattr ca = vgafb_read_char(get_cursor_pos(regs->bh)); - regs->al = ca.car; - regs->ah = ca.attr; -} - -static void noinline -handle_1009(struct bregs *regs) -{ - struct carattr ca = {regs->al, regs->bl, 1}; - struct cursorpos cp = get_cursor_pos(regs->bh); - int count = regs->cx; - while (count--) - write_char(&cp, ca); -} - -static void noinline -handle_100a(struct bregs *regs) -{ - struct carattr ca = {regs->al, regs->bl, 0}; - struct cursorpos cp = get_cursor_pos(regs->bh); - int count = regs->cx; - while (count--) - write_char(&cp, ca); -} - - -static void -handle_100b00(struct bregs *regs) -{ - stdvga_set_border_color(regs->bl); -} - -static void -handle_100b01(struct bregs *regs) -{ - stdvga_set_palette(regs->bl); -} - -static void -handle_100bXX(struct bregs *regs) -{ - debug_stub(regs); -} - -static void -handle_100b(struct bregs *regs) -{ - if (!CONFIG_VGA_STDVGA_PORTS) { - handle_100bXX(regs); - return; - } - switch (regs->bh) { - case 0x00: handle_100b00(regs); break; - case 0x01: handle_100b01(regs); break; - default: handle_100bXX(regs); break; - } -} - - -static void -handle_100c(struct bregs *regs) -{ - // XXX - page (regs->bh) is unused - vgafb_write_pixel(regs->al, regs->cx, regs->dx); -} - -static void -handle_100d(struct bregs *regs) -{ - // XXX - page (regs->bh) is unused - regs->al = vgafb_read_pixel(regs->cx, regs->dx); -} - -static void noinline -handle_100e(struct bregs *regs) -{ - // Ralf Brown Interrupt list is WRONG on bh(page) - // We do output only on the current page ! - struct carattr ca = {regs->al, regs->bl, 0}; - struct cursorpos cp = get_cursor_pos(GET_BDA(video_page)); - write_teletype(&cp, ca); - set_cursor_pos(cp); -} - -static void -handle_100f(struct bregs *regs) -{ - regs->bh = GET_BDA(video_page); - regs->al = GET_BDA(video_mode) | (GET_BDA(video_ctl) & 0x80); - regs->ah = GET_BDA(video_cols); -} - - -static void -handle_101000(struct bregs *regs) -{ - if (regs->bl > 0x14) - return; - stdvga_attr_write(regs->bl, regs->bh); -} - -static void -handle_101001(struct bregs *regs) -{ - stdvga_set_overscan_border_color(regs->bh); -} - -static void -handle_101002(struct bregs *regs) -{ - stdvga_set_all_palette_reg(regs->es, (u8*)(regs->dx + 0)); -} - -static void -handle_101003(struct bregs *regs) -{ - stdvga_toggle_intensity(regs->bl); -} - -static void -handle_101007(struct bregs *regs) -{ - if (regs->bl > 0x14) - return; - regs->bh = stdvga_attr_read(regs->bl); -} - -static void -handle_101008(struct bregs *regs) -{ - regs->bh = stdvga_get_overscan_border_color(); -} - -static void -handle_101009(struct bregs *regs) -{ - stdvga_get_all_palette_reg(regs->es, (u8*)(regs->dx + 0)); -} - -static void noinline -handle_101010(struct bregs *regs) -{ - u8 rgb[3] = {regs->dh, regs->ch, regs->cl}; - stdvga_dac_write(GET_SEG(SS), rgb, regs->bx, 1); -} - -static void -handle_101012(struct bregs *regs) -{ - stdvga_dac_write(regs->es, (u8*)(regs->dx + 0), regs->bx, regs->cx); -} - -static void -handle_101013(struct bregs *regs) -{ - stdvga_select_video_dac_color_page(regs->bl, regs->bh); -} - -static void noinline -handle_101015(struct bregs *regs) -{ - u8 rgb[3]; - stdvga_dac_read(GET_SEG(SS), rgb, regs->bx, 1); - regs->dh = rgb[0]; - regs->ch = rgb[1]; - regs->cl = rgb[2]; -} - -static void -handle_101017(struct bregs *regs) -{ - stdvga_dac_read(regs->es, (u8*)(regs->dx + 0), regs->bx, regs->cx); -} - -static void -handle_101018(struct bregs *regs) -{ - stdvga_pelmask_write(regs->bl); -} - -static void -handle_101019(struct bregs *regs) -{ - regs->bl = stdvga_pelmask_read(); -} - -static void -handle_10101a(struct bregs *regs) -{ - stdvga_read_video_dac_state(®s->bl, ®s->bh); -} - -static void -handle_10101b(struct bregs *regs) -{ - stdvga_perform_gray_scale_summing(regs->bx, regs->cx); -} - -static void -handle_1010XX(struct bregs *regs) -{ - debug_stub(regs); -} - -static void -handle_1010(struct bregs *regs) -{ - if (!CONFIG_VGA_STDVGA_PORTS) { - handle_1010XX(regs); - return; - } - switch (regs->al) { - case 0x00: handle_101000(regs); break; - case 0x01: handle_101001(regs); break; - case 0x02: handle_101002(regs); break; - case 0x03: handle_101003(regs); break; - case 0x07: handle_101007(regs); break; - case 0x08: handle_101008(regs); break; - case 0x09: handle_101009(regs); break; - case 0x10: handle_101010(regs); break; - case 0x12: handle_101012(regs); break; - case 0x13: handle_101013(regs); break; - case 0x15: handle_101015(regs); break; - case 0x17: handle_101017(regs); break; - case 0x18: handle_101018(regs); break; - case 0x19: handle_101019(regs); break; - case 0x1a: handle_10101a(regs); break; - case 0x1b: handle_10101b(regs); break; - default: handle_1010XX(regs); break; - } -} - - -static void -handle_101100(struct bregs *regs) -{ - stdvga_load_font(regs->es, (void*)(regs->bp+0), regs->cx - , regs->dx, regs->bl, regs->bh); -} - -static void -handle_101101(struct bregs *regs) -{ - stdvga_load_font(get_global_seg(), vgafont14, 0x100, 0, regs->bl, 14); -} - -static void -handle_101102(struct bregs *regs) -{ - stdvga_load_font(get_global_seg(), vgafont8, 0x100, 0, regs->bl, 8); -} - -static void -handle_101103(struct bregs *regs) -{ - stdvga_set_text_block_specifier(regs->bl); -} - -static void -handle_101104(struct bregs *regs) -{ - stdvga_load_font(get_global_seg(), vgafont16, 0x100, 0, regs->bl, 16); -} - -static void -handle_101110(struct bregs *regs) -{ - stdvga_load_font(regs->es, (void*)(regs->bp+0), regs->cx - , regs->dx, regs->bl, regs->bh); - set_scan_lines(regs->bh); -} - -static void -handle_101111(struct bregs *regs) -{ - stdvga_load_font(get_global_seg(), vgafont14, 0x100, 0, regs->bl, 14); - set_scan_lines(14); -} - -static void -handle_101112(struct bregs *regs) -{ - stdvga_load_font(get_global_seg(), vgafont8, 0x100, 0, regs->bl, 8); - set_scan_lines(8); -} - -static void -handle_101114(struct bregs *regs) -{ - stdvga_load_font(get_global_seg(), vgafont16, 0x100, 0, regs->bl, 16); - set_scan_lines(16); -} - -static void -handle_101120(struct bregs *regs) -{ - SET_IVT(0x1f, SEGOFF(regs->es, regs->bp)); -} - -void -load_gfx_font(u16 seg, u16 off, u8 height, u8 bl, u8 dl) -{ - u8 rows; - - SET_IVT(0x43, SEGOFF(seg, off)); - switch(bl) { - case 0: - rows = dl; - break; - case 1: - rows = 14; - break; - case 3: - rows = 43; - break; - case 2: - default: - rows = 25; - break; - } - SET_BDA(video_rows, rows - 1); - SET_BDA(char_height, height); -} - -static void -handle_101121(struct bregs *regs) -{ - load_gfx_font(regs->es, regs->bp, regs->cx, regs->bl, regs->dl); -} - -static void -handle_101122(struct bregs *regs) -{ - load_gfx_font(get_global_seg(), (u32)vgafont14, 14, regs->bl, regs->dl); -} - -static void -handle_101123(struct bregs *regs) -{ - load_gfx_font(get_global_seg(), (u32)vgafont8, 8, regs->bl, regs->dl); -} - -static void -handle_101124(struct bregs *regs) -{ - load_gfx_font(get_global_seg(), (u32)vgafont16, 16, regs->bl, regs->dl); -} - -static void -handle_101130(struct bregs *regs) -{ - switch (regs->bh) { - case 0x00: { - struct segoff_s so = GET_IVT(0x1f); - regs->es = so.seg; - regs->bp = so.offset; - break; - } - case 0x01: { - struct segoff_s so = GET_IVT(0x43); - regs->es = so.seg; - regs->bp = so.offset; - break; - } - case 0x02: - regs->es = get_global_seg(); - regs->bp = (u32)vgafont14; - break; - case 0x03: - regs->es = get_global_seg(); - regs->bp = (u32)vgafont8; - break; - case 0x04: - regs->es = get_global_seg(); - regs->bp = (u32)vgafont8 + 128 * 8; - break; - case 0x05: - regs->es = get_global_seg(); - regs->bp = (u32)vgafont14alt; - break; - case 0x06: - regs->es = get_global_seg(); - regs->bp = (u32)vgafont16; - break; - case 0x07: - regs->es = get_global_seg(); - regs->bp = (u32)vgafont16alt; - break; - default: - dprintf(1, "Get font info BH(%02x) was discarded\n", regs->bh); - return; - } - // Set byte/char of on screen font - regs->cx = GET_BDA(char_height) & 0xff; - - // Set Highest char row - regs->dl = GET_BDA(video_rows); -} - -static void -handle_1011XX(struct bregs *regs) -{ - debug_stub(regs); -} - -static void -handle_1011(struct bregs *regs) -{ - if (CONFIG_VGA_STDVGA_PORTS) { - switch (regs->al) { - case 0x00: handle_101100(regs); return; - case 0x01: handle_101101(regs); return; - case 0x02: handle_101102(regs); return; - case 0x03: handle_101103(regs); return; - case 0x04: handle_101104(regs); return; - case 0x10: handle_101110(regs); return; - case 0x11: handle_101111(regs); return; - case 0x12: handle_101112(regs); return; - case 0x14: handle_101114(regs); return; - } - } - switch (regs->al) { - case 0x30: handle_101130(regs); break; - case 0x20: handle_101120(regs); break; - case 0x21: handle_101121(regs); break; - case 0x22: handle_101122(regs); break; - case 0x23: handle_101123(regs); break; - case 0x24: handle_101124(regs); break; - default: handle_1011XX(regs); break; - } -} - - -static void -handle_101210(struct bregs *regs) -{ - u16 crtc_addr = GET_BDA(crtc_address); - if (crtc_addr == VGAREG_MDA_CRTC_ADDRESS) - regs->bx = 0x0103; - else - regs->bx = 0x0003; - regs->cx = GET_BDA(video_switches) & 0x0f; -} - -static void -handle_101230(struct bregs *regs) -{ - u8 mctl = GET_BDA(modeset_ctl); - u8 vswt = GET_BDA(video_switches); - switch (regs->al) { - case 0x00: - // 200 lines - mctl = (mctl & ~0x10) | 0x80; - vswt = (vswt & ~0x0f) | 0x08; - break; - case 0x01: - // 350 lines - mctl &= ~0x90; - vswt = (vswt & ~0x0f) | 0x09; - break; - case 0x02: - // 400 lines - mctl = (mctl & ~0x80) | 0x10; - vswt = (vswt & ~0x0f) | 0x09; - break; - default: - dprintf(1, "Select vert res (%02x) was discarded\n", regs->al); - break; - } - SET_BDA(modeset_ctl, mctl); - SET_BDA(video_switches, vswt); - regs->al = 0x12; -} - -static void -handle_101231(struct bregs *regs) -{ - u8 v = (regs->al & 0x01) << 3; - u8 mctl = GET_BDA(video_ctl) & ~0x08; - SET_BDA(video_ctl, mctl | v); - regs->al = 0x12; -} - -static void -handle_101232(struct bregs *regs) -{ - if (CONFIG_VGA_STDVGA_PORTS) { - stdvga_enable_video_addressing(regs->al); - regs->al = 0x12; - } -} - -static void -handle_101233(struct bregs *regs) -{ - u8 v = ((regs->al << 1) & 0x02) ^ 0x02; - u8 v2 = GET_BDA(modeset_ctl) & ~0x02; - SET_BDA(modeset_ctl, v | v2); - regs->al = 0x12; -} - -static void -handle_101234(struct bregs *regs) -{ - SET_BDA(video_ctl, (GET_BDA(video_ctl) & ~0x01) | (regs->al & 0x01)); - regs->al = 0x12; -} - -static void -handle_101235(struct bregs *regs) -{ - debug_stub(regs); - regs->al = 0x12; -} - -static void -handle_101236(struct bregs *regs) -{ - debug_stub(regs); - regs->al = 0x12; -} - -static void -handle_1012XX(struct bregs *regs) -{ - debug_stub(regs); -} - -static void -handle_1012(struct bregs *regs) -{ - if (CONFIG_VGA_CIRRUS && regs->bl >= 0x80) { - clext_1012(regs); - return; - } - - switch (regs->bl) { - case 0x10: handle_101210(regs); break; - case 0x30: handle_101230(regs); break; - case 0x31: handle_101231(regs); break; - case 0x32: handle_101232(regs); break; - case 0x33: handle_101233(regs); break; - case 0x34: handle_101234(regs); break; - case 0x35: handle_101235(regs); break; - case 0x36: handle_101236(regs); break; - default: handle_1012XX(regs); break; - } -} - - -// Write string -static void noinline -handle_1013(struct bregs *regs) -{ - struct cursorpos cp = {regs->dl, regs->dh, regs->bh}; - u16 count = regs->cx; - u8 *offset_far = (void*)(regs->bp + 0); - u8 attr = regs->bl; - while (count--) { - u8 car = GET_FARVAR(regs->es, *offset_far); - offset_far++; - if (regs->al & 2) { - attr = GET_FARVAR(regs->es, *offset_far); - offset_far++; - } - - struct carattr ca = {car, attr, 1}; - write_teletype(&cp, ca); - } - - if (regs->al & 1) - set_cursor_pos(cp); -} - - -static void -handle_101a00(struct bregs *regs) -{ - regs->bx = GET_BDA(dcc_index); - regs->al = 0x1a; -} - -static void -handle_101a01(struct bregs *regs) -{ - SET_BDA(dcc_index, regs->bl); - dprintf(1, "Alternate Display code (%02x) was discarded\n", regs->bh); - regs->al = 0x1a; -} - -static void -handle_101aXX(struct bregs *regs) -{ - debug_stub(regs); -} - -static void -handle_101a(struct bregs *regs) -{ - switch (regs->al) { - case 0x00: handle_101a00(regs); break; - case 0x01: handle_101a01(regs); break; - default: handle_101aXX(regs); break; - } -} - - -struct video_func_static static_functionality VAR16 = { - .modes = 0x00, // Filled in by stdvga_build_video_param() - .scanlines = 0x07, // 200, 350, 400 scan lines - .cblocks = 0x02, // mamimum number of visible charsets in text mode - .active_cblocks = 0x08, // total number of charset blocks in text mode - .misc_flags = 0x0ce7, -}; - -static void -handle_101b(struct bregs *regs) -{ - u16 seg = regs->es; - struct video_func_info *info = (void*)(regs->di+0); - memset_far(seg, info, 0, sizeof(*info)); - // Address of static functionality table - SET_FARVAR(seg, info->static_functionality - , SEGOFF(get_global_seg(), (u32)&static_functionality)); - - // Hard coded copy from BIOS area. Should it be cleaner ? - memcpy_far(seg, info->bda_0x49, SEG_BDA, (void*)0x49 - , sizeof(info->bda_0x49)); - memcpy_far(seg, info->bda_0x84, SEG_BDA, (void*)0x84 - , sizeof(info->bda_0x84)); - - SET_FARVAR(seg, info->dcc_index, GET_BDA(dcc_index)); - SET_FARVAR(seg, info->colors, 16); - SET_FARVAR(seg, info->pages, 8); - SET_FARVAR(seg, info->scan_lines, 2); - SET_FARVAR(seg, info->video_mem, 3); - regs->al = 0x1B; -} - - -static void -handle_101c(struct bregs *regs) -{ - u16 seg = regs->es; - void *data = (void*)(regs->bx+0); - u16 states = regs->cx; - u8 cmd = regs->al; - if (states & ~0x07 || cmd > 2) - goto fail; - int ret = vgahw_save_restore(states | (cmd<<8), seg, data); - if (ret < 0) - goto fail; - if (cmd == 0) - regs->bx = ret / 64; - regs->al = 0x1c; -fail: - return; -} - -static void -handle_10XX(struct bregs *regs) -{ - debug_stub(regs); -} - -// INT 10h Video Support Service Entry Point -void VISIBLE16 -handle_10(struct bregs *regs) -{ - debug_enter(regs, DEBUG_VGA_10); - swcursor_pre_handle10(regs); - - switch (regs->ah) { - case 0x00: handle_1000(regs); break; - case 0x01: handle_1001(regs); break; - case 0x02: handle_1002(regs); break; - case 0x03: handle_1003(regs); break; - case 0x04: handle_1004(regs); break; - case 0x05: handle_1005(regs); break; - case 0x06: handle_1006(regs); break; - case 0x07: handle_1007(regs); break; - case 0x08: handle_1008(regs); break; - case 0x09: handle_1009(regs); break; - case 0x0a: handle_100a(regs); break; - case 0x0b: handle_100b(regs); break; - case 0x0c: handle_100c(regs); break; - case 0x0d: handle_100d(regs); break; - case 0x0e: handle_100e(regs); break; - case 0x0f: handle_100f(regs); break; - case 0x10: handle_1010(regs); break; - case 0x11: handle_1011(regs); break; - case 0x12: handle_1012(regs); break; - case 0x13: handle_1013(regs); break; - case 0x1a: handle_101a(regs); break; - case 0x1b: handle_101b(regs); break; - case 0x1c: handle_101c(regs); break; - case 0x4f: handle_104f(regs); break; - default: handle_10XX(regs); break; - } -} diff --git a/payloads/external/SeaBIOS/vgasrc/vgabios.h b/payloads/external/SeaBIOS/vgasrc/vgabios.h deleted file mode 100644 index e2edec03..00000000 --- a/payloads/external/SeaBIOS/vgasrc/vgabios.h +++ /dev/null @@ -1,88 +0,0 @@ -#ifndef __VGABIOS_H -#define __VGABIOS_H - -#include "config.h" // CONFIG_VGA_EMULATE_TEXT -#include "farptr.h" // GET_FARVAR -#include "types.h" // u8 - -// Save/Restore flags -#define SR_HARDWARE 0x0001 -#define SR_BDA 0x0002 -#define SR_DAC 0x0004 -#define SR_REGISTERS 0x0008 -#define SR_SAVE 0x0100 -#define SR_RESTORE 0x0200 - -// Mode flags -#define MF_LEGACY 0x0001 -#define MF_GRAYSUM 0x0002 -#define MF_NOPALETTE 0x0008 -#define MF_CUSTOMCRTC 0x0800 -#define MF_LINEARFB 0x4000 -#define MF_NOCLEARMEM 0x8000 -#define MF_VBEFLAGS 0xfe00 - -// Memory model types -#define MM_TEXT 0x00 -#define MM_CGA 0x01 -#define MM_HERCULES 0x02 -#define MM_PLANAR 0x03 -#define MM_PACKED 0x04 -#define MM_NON_CHAIN_4_256 0x05 -#define MM_DIRECT 0x06 -#define MM_YUV 0x07 - -struct vgamode_s { - u8 memmodel; - u16 width; - u16 height; - u8 depth; - u8 cwidth; - u8 cheight; - u16 sstart; -}; - -// Custom internal storage in BDA (don't change here without also -// updating vgaentry.S) -#define VGA_CUSTOM_BDA 0xb9 - -struct vga_bda_s { - u8 flags; - u16 vbe_mode; - u16 vgamode_offset; -} PACKED; - -#define BF_PM_MASK 0x0f -#define BF_EMULATE_TEXT 0x10 -#define BF_SWCURSOR 0x20 -#define BF_EXTRA_STACK 0x40 - -#define GET_BDA_EXT(var) \ - GET_FARVAR(SEG_BDA, ((struct vga_bda_s *)VGA_CUSTOM_BDA)->var) -#define SET_BDA_EXT(var, val) \ - SET_FARVAR(SEG_BDA, ((struct vga_bda_s *)VGA_CUSTOM_BDA)->var, (val)) -#define MASK_BDA_EXT(var, off, on) \ - SET_BDA_EXT(var, (GET_BDA_EXT(var) & ~(off)) | (on)) - -static inline int vga_emulate_text(void) { - return CONFIG_VGA_EMULATE_TEXT && GET_BDA_EXT(flags) & BF_EMULATE_TEXT; -} - -// Write to global variables (during "post" phase only) -#define SET_VGA(var, val) SET_FARVAR(get_global_seg(), (var), (val)) - -// Debug settings -#define DEBUG_VGA_POST 1 -#define DEBUG_VGA_10 9 - -// vgabios.c -int vga_bpp(struct vgamode_s *vmode_g); -u16 calc_page_size(u8 memmodel, u16 width, u16 height); -u16 get_cursor_shape(void); -struct cursorpos get_cursor_pos(u8 page); -int bda_save_restore(int cmd, u16 seg, void *data); -struct vgamode_s *get_current_mode(void); -int vga_set_mode(int mode, int flags); -extern struct video_func_static static_functionality; - -#endif // vgabios.h diff --git a/payloads/external/SeaBIOS/vgasrc/vgaentry.S b/payloads/external/SeaBIOS/vgasrc/vgaentry.S deleted file mode 100644 index f9624fce..00000000 --- a/payloads/external/SeaBIOS/vgasrc/vgaentry.S +++ /dev/null @@ -1,164 +0,0 @@ -// Rom layout and bios assembler to C interface. -// -// Copyright (C) 2009-2013 Kevin O'Connor <kevin@koconnor.net> -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - - -#include "asm-offsets.h" // BREGS_* -#include "config.h" // CONFIG_* -#include "entryfuncs.S" // ENTRY_* - - -/**************************************************************** - * Rom Header - ****************************************************************/ - - .section .rom.header - .code16 - .global _rom_header, _rom_header_size, _rom_header_checksum -_rom_header: - .word 0xaa55 -_rom_header_size: - .byte 0 -_rom_header_entry: - jmp _optionrom_entry -_rom_header_checksum: - .byte 0 -_rom_header_other: - .space 17 -_rom_header_pcidata: -#if CONFIG_VGA_PCI == 1 - .word rom_pci_data -#else - .word 0 -#endif -_rom_header_pnpdata: - .word 0 -_rom_header_other2: - .word 0 -_rom_header_signature: - .asciz "IBM" - -#if CONFIG_VGA_ATI -#include "ati-tables.S" -#endif - -/**************************************************************** - * Entry points - ****************************************************************/ - - // This macro implements a call while avoiding instructions - // that old versions of x86emu have problems with. - .macro VGA_CALLL cfunc -#if CONFIG_VGA_FIXUP_ASM - pushw %ax - callw \cfunc -#else - calll \cfunc -#endif - .endm - - // This macro is the same as ENTRY_ARG except VGA_CALLL is used. - .macro ENTRY_ARG_VGA cfunc - cli - cld - PUSHBREGS - movw %ss, %ax // Move %ss to %ds - movw %ax, %ds - movl %esp, %ebx // Backup %esp, then zero high bits - movzwl %sp, %esp - movl %esp, %eax // First arg is pointer to struct bregs - VGA_CALLL \cfunc - movl %ebx, %esp // Restore %esp (including high bits) - POPBREGS - .endm - - DECLFUNC entry_104f05 -entry_104f05: - ENTRY_ARG_VGA vbe_104f05 - lretw - - DECLFUNC _optionrom_entry -_optionrom_entry: - ENTRY_ARG_VGA vga_post - lretw - - DECLFUNC entry_10 -entry_10: - ENTRY_ARG_VGA handle_10 - iretw - -#define VGA_CUSTOM_BDA_FLAGS 0xb9 -#define BF_EXTRA_STACK 0x40 - - // Entry point using extra stack - DECLFUNC entry_10_extrastack -entry_10_extrastack: - cli - cld - pushw %ds - pushl %eax - - movw $SEG_BDA, %ax // Check if extra stack is enabled - movw %ax, %ds - testb $BF_EXTRA_STACK, VGA_CUSTOM_BDA_FLAGS - jz 1f - - movw %cs:ExtraStackSeg, %ds // Set %ds:%eax to space on ExtraStack - movl $(CONFIG_VGA_EXTRA_STACK_SIZE-PUSHBREGS_size-16), %eax - SAVEBREGS_POP_DSEAX // Save registers on extra stack - movl %esp, PUSHBREGS_size+8(%eax) - movw %ss, PUSHBREGS_size+12(%eax) - popl BREGS_code(%eax) - popw BREGS_flags(%eax) - - movw %ds, %dx // Setup %ss/%esp and call function - movw %dx, %ss - movl %eax, %esp - VGA_CALLL handle_10 - - movl %esp, %eax // Restore registers and return - movw PUSHBREGS_size+12(%eax), %ss - movl PUSHBREGS_size+8(%eax), %esp - popl %edx - popw %dx - pushw BREGS_flags(%eax) - pushl BREGS_code(%eax) - RESTOREBREGS_DSEAX - iretw - -1: // Use regular entry point if the extra stack is disabled - popl %eax - popw %ds - jmp entry_10 - - // Timer irq handling - DECLFUNC entry_timer_hook -entry_timer_hook: - ENTRY handle_timer_hook - ljmpw *%cs:Timer_Hook_Resume - - // Timer irq handling on extra stack - DECLFUNC entry_timer_hook_extrastack -entry_timer_hook_extrastack: - cli - cld - pushw %ds // Set %ds:%eax to space on ExtraStack - pushl %eax - movw %cs:ExtraStackSeg, %ds - movl $(CONFIG_VGA_EXTRA_STACK_SIZE-PUSHBREGS_size-8), %eax - SAVEBREGS_POP_DSEAX - movl %esp, PUSHBREGS_size(%eax) - movw %ss, PUSHBREGS_size+4(%eax) - - movw %ds, %dx // Setup %ss/%esp and call function - movw %dx, %ss - movl %eax, %esp - calll handle_timer_hook - - movl %esp, %eax // Restore registers and return - movw PUSHBREGS_size+4(%eax), %ss - movl PUSHBREGS_size(%eax), %esp - RESTOREBREGS_DSEAX - ljmpw *%cs:Timer_Hook_Resume diff --git a/payloads/external/SeaBIOS/vgasrc/vgafb.c b/payloads/external/SeaBIOS/vgasrc/vgafb.c deleted file mode 100644 index f8f35c2d..00000000 --- a/payloads/external/SeaBIOS/vgasrc/vgafb.c +++ /dev/null @@ -1,660 +0,0 @@ -// Code for manipulating VGA framebuffers. -// -// Copyright (C) 2009-2014 Kevin O'Connor <kevin@koconnor.net> -// Copyright (C) 2001-2008 the LGPL VGABios developers Team -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "biosvar.h" // GET_BDA -#include "byteorder.h" // cpu_to_be16 -#include "output.h" // dprintf -#include "stdvga.h" // stdvga_planar4_plane -#include "string.h" // memset_far -#include "vgabios.h" // get_current_mode -#include "vgafb.h" // vgafb_write_char -#include "vgahw.h" // vgahw_get_linelength -#include "vgautil.h" // VBE_framebuffer - -static inline void -memmove_stride(u16 seg, void *dst, void *src, int copylen, int stride, int lines) -{ - if (src < dst) { - dst += stride * (lines - 1); - src += stride * (lines - 1); - stride = -stride; - } - for (; lines; lines--, dst+=stride, src+=stride) - memcpy_far(seg, dst, seg, src, copylen); -} - -static inline void -memset_stride(u16 seg, void *dst, u8 val, int setlen, int stride, int lines) -{ - for (; lines; lines--, dst+=stride) - memset_far(seg, dst, val, setlen); -} - -static inline void -memset16_stride(u16 seg, void *dst, u16 val, int setlen, int stride, int lines) -{ - for (; lines; lines--, dst+=stride) - memset16_far(seg, dst, val, setlen); -} - - -/**************************************************************** - * Basic stdvga graphic manipulation - ****************************************************************/ - -static void -gfx_planar(struct gfx_op *op) -{ - if (!CONFIG_VGA_STDVGA_PORTS) - return; - void *dest_far = (void*)(op->y * op->linelength + op->x / 8); - int plane; - switch (op->op) { - default: - case GO_READ8: - memset(op->pixels, 0, sizeof(op->pixels)); - for (plane = 0; plane < 4; plane++) { - stdvga_planar4_plane(plane); - u8 data = GET_FARVAR(SEG_GRAPH, *(u8*)dest_far); - int pixel; - for (pixel=0; pixel<8; pixel++) - op->pixels[pixel] |= ((data>>(7-pixel)) & 1) << plane; - } - break; - case GO_WRITE8: - for (plane = 0; plane<4; plane++) { - stdvga_planar4_plane(plane); - u8 data = 0; - int pixel; - for (pixel=0; pixel<8; pixel++) - data |= ((op->pixels[pixel]>>plane) & 1) << (7-pixel); - SET_FARVAR(SEG_GRAPH, *(u8*)dest_far, data); - } - break; - case GO_MEMSET: - for (plane = 0; plane < 4; plane++) { - stdvga_planar4_plane(plane); - u8 data = (op->pixels[0] & (1<<plane)) ? 0xff : 0x00; - memset_stride(SEG_GRAPH, dest_far, data - , op->xlen / 8, op->linelength, op->ylen); - } - break; - case GO_MEMMOVE: ; - void *src_far = (void*)(op->srcy * op->linelength + op->x / 8); - for (plane = 0; plane < 4; plane++) { - stdvga_planar4_plane(plane); - memmove_stride(SEG_GRAPH, dest_far, src_far - , op->xlen / 8, op->linelength, op->ylen); - } - break; - } - stdvga_planar4_plane(-1); -} - -static void -gfx_cga(struct gfx_op *op) -{ - int bpp = GET_GLOBAL(op->vmode_g->depth); - void *dest_far = (void*)(op->y / 2 * op->linelength + op->x / 8 * bpp); - switch (op->op) { - default: - case GO_READ8: - if (op->y & 1) - dest_far += 0x2000; - if (bpp == 1) { - u8 data = GET_FARVAR(SEG_CTEXT, *(u8*)dest_far); - int pixel; - for (pixel=0; pixel<8; pixel++) - op->pixels[pixel] = (data >> (7-pixel)) & 1; - } else { - u16 data = GET_FARVAR(SEG_CTEXT, *(u16*)dest_far); - data = be16_to_cpu(data); - int pixel; - for (pixel=0; pixel<8; pixel++) - op->pixels[pixel] = (data >> ((7-pixel)*2)) & 3; - } - break; - case GO_WRITE8: - if (op->y & 1) - dest_far += 0x2000; - if (bpp == 1) { - u8 data = 0; - int pixel; - for (pixel=0; pixel<8; pixel++) - data |= (op->pixels[pixel] & 1) << (7-pixel); - SET_FARVAR(SEG_CTEXT, *(u8*)dest_far, data); - } else { - u16 data = 0; - int pixel; - for (pixel=0; pixel<8; pixel++) - data |= (op->pixels[pixel] & 3) << ((7-pixel) * 2); - data = cpu_to_be16(data); - SET_FARVAR(SEG_CTEXT, *(u16*)dest_far, data); - } - break; - case GO_MEMSET: ; - u8 data = op->pixels[0]; - if (bpp == 1) - data = (data&1) | ((data&1)<<1); - data &= 3; - data |= (data<<2) | (data<<4) | (data<<6); - memset_stride(SEG_CTEXT, dest_far, data - , op->xlen / 8 * bpp, op->linelength, op->ylen / 2); - memset_stride(SEG_CTEXT, dest_far + 0x2000, data - , op->xlen / 8 * bpp, op->linelength, op->ylen / 2); - break; - case GO_MEMMOVE: ; - void *src_far = (void*)(op->srcy / 2 * op->linelength + op->x / 8 * bpp); - memmove_stride(SEG_CTEXT, dest_far, src_far - , op->xlen / 8 * bpp, op->linelength, op->ylen / 2); - memmove_stride(SEG_CTEXT, dest_far + 0x2000, src_far + 0x2000 - , op->xlen / 8 * bpp, op->linelength, op->ylen / 2); - break; - } -} - -static void -gfx_packed(struct gfx_op *op) -{ - void *dest_far = (void*)(op->y * op->linelength + op->x); - switch (op->op) { - default: - case GO_READ8: - memcpy_far(GET_SEG(SS), op->pixels, SEG_GRAPH, dest_far, 8); - break; - case GO_WRITE8: - memcpy_far(SEG_GRAPH, dest_far, GET_SEG(SS), op->pixels, 8); - break; - case GO_MEMSET: - memset_stride(SEG_GRAPH, dest_far, op->pixels[0] - , op->xlen, op->linelength, op->ylen); - break; - case GO_MEMMOVE: ; - void *src_far = (void*)(op->srcy * op->linelength + op->x); - memmove_stride(SEG_GRAPH, dest_far, src_far - , op->xlen, op->linelength, op->ylen); - break; - } -} - - -/**************************************************************** - * Direct framebuffers in high mem - ****************************************************************/ - -// Use int 1587 call to copy memory to/from the framebuffer. -void memcpy_high(void *dest, void *src, u32 len) -{ - u64 gdt[6]; - gdt[2] = GDT_DATA | GDT_LIMIT(0xfffff) | GDT_BASE((u32)src); - gdt[3] = GDT_DATA | GDT_LIMIT(0xfffff) | GDT_BASE((u32)dest); - - // Call int 1587 to copy data. - len/=2; - u32 flags; - u32 eax = 0x8700; - u32 si = (u32)&gdt; - SET_SEG(ES, GET_SEG(SS)); - asm volatile( - "stc\n" - "int $0x15\n" - "cli\n" - "cld\n" - "pushfl\n" - "popl %0\n" - : "=r" (flags), "+a" (eax), "+S" (si), "+c" (len) - : : "cc", "memory"); -} - -static void -memmove_stride_high(void *dst, void *src, int copylen, int stride, int lines) -{ - if (src < dst) { - dst += stride * (lines - 1); - src += stride * (lines - 1); - stride = -stride; - } - for (; lines; lines--, dst+=stride, src+=stride) - memcpy_high(dst, src, copylen); -} - -// Map a CGA color to a "direct" mode rgb value. -static u32 -get_color(int depth, u8 attr) -{ - int rbits, gbits, bbits; - switch (depth) { - case 15: rbits=5; gbits=5; bbits=5; break; - case 16: rbits=5; gbits=6; bbits=5; break; - default: - case 24: rbits=8; gbits=8; bbits=8; break; - } - int h = (attr&8) ? 1 : 0; - int r = (attr&4) ? 2 : 0, g = (attr&2) ? 2 : 0, b = (attr&1) ? 2 : 0; - if ((attr & 0xf) == 6) - g = 1; - int rv = DIV_ROUND_CLOSEST(((1<<rbits) - 1) * (r + h), 3); - int gv = DIV_ROUND_CLOSEST(((1<<gbits) - 1) * (g + h), 3); - int bv = DIV_ROUND_CLOSEST(((1<<bbits) - 1) * (b + h), 3); - return (rv << (gbits+bbits)) + (gv << bbits) + bv; -} - -// Find the closest attribute for a given framebuffer color -static u8 -reverse_color(int depth, u32 color) -{ - int rbits, gbits, bbits; - switch (depth) { - case 15: rbits=5; gbits=5; bbits=5; break; - case 16: rbits=5; gbits=6; bbits=5; break; - default: - case 24: rbits=8; gbits=8; bbits=8; break; - } - int rv = (color >> (gbits+bbits)) & ((1<<rbits)-1); - int gv = (color >> bbits) & ((1<<gbits)-1); - int bv = color & ((1<<bbits)-1); - int r = DIV_ROUND_CLOSEST(rv * 3, (1<<rbits) - 1); - int g = DIV_ROUND_CLOSEST(gv * 3, (1<<gbits) - 1); - int b = DIV_ROUND_CLOSEST(bv * 3, (1<<bbits) - 1); - int h = r && g && b && (r != 2 || g != 2 || b != 2); - return (h ? 8 : 0) | ((r-h) ? 4 : 0) | ((g-h) ? 2 : 0) | ((b-h) ? 1 : 0); -} - -static void -gfx_direct(struct gfx_op *op) -{ - void *fb = (void*)GET_GLOBAL(VBE_framebuffer); - if (!fb) - return; - int depth = GET_GLOBAL(op->vmode_g->depth); - int bypp = DIV_ROUND_UP(depth, 8); - void *dest_far = (fb + op->displaystart + op->y * op->linelength - + op->x * bypp); - u8 data[64]; - int i; - switch (op->op) { - default: - case GO_READ8: - memcpy_high(MAKE_FLATPTR(GET_SEG(SS), data), dest_far, bypp * 8); - for (i=0; i<8; i++) - op->pixels[i] = reverse_color(depth, *(u32*)&data[i*bypp]); - break; - case GO_WRITE8: - for (i=0; i<8; i++) - *(u32*)&data[i*bypp] = get_color(depth, op->pixels[i]); - memcpy_high(dest_far, MAKE_FLATPTR(GET_SEG(SS), data), bypp * 8); - break; - case GO_MEMSET: ; - u32 color = get_color(depth, op->pixels[0]); - for (i=0; i<8; i++) - *(u32*)&data[i*bypp] = color; - memcpy_high(dest_far, MAKE_FLATPTR(GET_SEG(SS), data), bypp * 8); - memcpy_high(dest_far + bypp * 8, dest_far, op->xlen * bypp - bypp * 8); - for (i=1; i < op->ylen; i++) - memcpy_high(dest_far + op->linelength * i - , dest_far, op->xlen * bypp); - break; - case GO_MEMMOVE: ; - void *src_far = (fb + op->displaystart + op->srcy * op->linelength - + op->x * bypp); - memmove_stride_high(dest_far, src_far - , op->xlen * bypp, op->linelength, op->ylen); - break; - } -} - - -/**************************************************************** - * Gfx interface - ****************************************************************/ - -// Prepare a struct gfx_op for use. -void -init_gfx_op(struct gfx_op *op, struct vgamode_s *vmode_g) -{ - memset(op, 0, sizeof(*op)); - op->vmode_g = vmode_g; - op->linelength = vgahw_get_linelength(vmode_g); - op->displaystart = vgahw_get_displaystart(vmode_g); -} - -// Issue a graphics operation. -void -handle_gfx_op(struct gfx_op *op) -{ - switch (GET_GLOBAL(op->vmode_g->memmodel)) { - case MM_PLANAR: - gfx_planar(op); - break; - case MM_CGA: - gfx_cga(op); - break; - case MM_PACKED: - gfx_packed(op); - break; - case MM_DIRECT: - gfx_direct(op); - break; - default: - break; - } -} - -// Move characters when in graphics mode. -static void -gfx_move_chars(struct vgamode_s *vmode_g, struct cursorpos dest - , struct cursorpos movesize, int lines) -{ - struct gfx_op op; - init_gfx_op(&op, vmode_g); - op.x = dest.x * 8; - op.xlen = movesize.x * 8; - int cheight = GET_BDA(char_height); - op.y = dest.y * cheight; - op.ylen = movesize.y * cheight; - op.srcy = op.y + lines * cheight; - op.op = GO_MEMMOVE; - handle_gfx_op(&op); -} - -// Clear area of screen in graphics mode. -static void -gfx_clear_chars(struct vgamode_s *vmode_g, struct cursorpos win - , struct cursorpos winsize, struct carattr ca) -{ - struct gfx_op op; - init_gfx_op(&op, vmode_g); - op.x = win.x * 8; - op.xlen = winsize.x * 8; - int cheight = GET_BDA(char_height); - op.y = win.y * cheight; - op.ylen = winsize.y * cheight; - op.pixels[0] = ca.attr; - if (vga_emulate_text()) - op.pixels[0] = ca.attr >> 4; - op.op = GO_MEMSET; - handle_gfx_op(&op); -} - -// Return the font for a given character -struct segoff_s -get_font_data(u8 c) -{ - int char_height = GET_BDA(char_height); - struct segoff_s font; - if (char_height == 8 && c >= 128) { - font = GET_IVT(0x1f); - c -= 128; - } else { - font = GET_IVT(0x43); - } - font.offset += c * char_height; - return font; -} - -// Write a character to the screen in graphics mode. -static void -gfx_write_char(struct vgamode_s *vmode_g - , struct cursorpos cp, struct carattr ca) -{ - if (cp.x >= GET_BDA(video_cols)) - return; - - struct segoff_s font = get_font_data(ca.car); - struct gfx_op op; - init_gfx_op(&op, vmode_g); - op.x = cp.x * 8; - int cheight = GET_BDA(char_height); - op.y = cp.y * cheight; - u8 fgattr = ca.attr, bgattr = 0x00; - int usexor = 0; - if (vga_emulate_text()) { - if (ca.use_attr) { - bgattr = fgattr >> 4; - fgattr = fgattr & 0x0f; - } else { - // Read bottom right pixel of the cell to guess bg color - op.op = GO_READ8; - op.y += cheight-1; - handle_gfx_op(&op); - op.y -= cheight-1; - bgattr = op.pixels[7]; - fgattr = bgattr ^ 0x7; - } - } else if (fgattr & 0x80 && GET_GLOBAL(vmode_g->depth) < 8) { - usexor = 1; - fgattr &= 0x7f; - } - int i; - for (i = 0; i < cheight; i++, op.y++) { - u8 fontline = GET_FARVAR(font.seg, *(u8*)(font.offset+i)); - if (usexor) { - op.op = GO_READ8; - handle_gfx_op(&op); - int j; - for (j = 0; j < 8; j++) - op.pixels[j] ^= (fontline & (0x80>>j)) ? fgattr : 0x00; - } else { - int j; - for (j = 0; j < 8; j++) - op.pixels[j] = (fontline & (0x80>>j)) ? fgattr : bgattr; - } - op.op = GO_WRITE8; - handle_gfx_op(&op); - } -} - -// Read a character from the screen in graphics mode. -static struct carattr -gfx_read_char(struct vgamode_s *vmode_g, struct cursorpos cp) -{ - u8 lines[16]; - int cheight = GET_BDA(char_height); - if (cp.x >= GET_BDA(video_cols) || cheight > ARRAY_SIZE(lines)) - goto fail; - - // Read cell from screen - struct gfx_op op; - init_gfx_op(&op, vmode_g); - op.op = GO_READ8; - op.x = cp.x * 8; - op.y = cp.y * cheight; - int car = 0; - u8 fgattr = 0x00, bgattr = 0x00; - if (vga_emulate_text()) { - // Read bottom right pixel of the cell to guess bg color - op.y += cheight-1; - handle_gfx_op(&op); - op.y -= cheight-1; - bgattr = op.pixels[7]; - fgattr = bgattr ^ 0x7; - // Report space character for blank cells (skip null character check) - car = 1; - } - u8 i, j; - for (i=0; i<cheight; i++, op.y++) { - u8 line = 0; - handle_gfx_op(&op); - for (j=0; j<8; j++) - if (op.pixels[j] != bgattr) { - line |= 0x80 >> j; - fgattr = op.pixels[j]; - } - lines[i] = line; - } - - // Determine font - for (; car<256; car++) { - struct segoff_s font = get_font_data(car); - if (memcmp_far(GET_SEG(SS), lines - , font.seg, (void*)(font.offset+0), cheight) == 0) - return (struct carattr){car, fgattr | (bgattr << 4), 0}; - } -fail: - return (struct carattr){0, 0, 0}; -} - -// Set the pixel at the given position. -void -vgafb_write_pixel(u8 color, u16 x, u16 y) -{ - struct vgamode_s *vmode_g = get_current_mode(); - if (!vmode_g) - return; - - struct gfx_op op; - init_gfx_op(&op, vmode_g); - op.x = ALIGN_DOWN(x, 8); - op.y = y; - op.op = GO_READ8; - handle_gfx_op(&op); - - int usexor = color & 0x80 && GET_GLOBAL(vmode_g->depth) < 8; - if (usexor) - op.pixels[x & 0x07] ^= color & 0x7f; - else - op.pixels[x & 0x07] = color; - op.op = GO_WRITE8; - handle_gfx_op(&op); -} - -// Return the pixel at the given position. -u8 -vgafb_read_pixel(u16 x, u16 y) -{ - struct vgamode_s *vmode_g = get_current_mode(); - if (!vmode_g) - return 0; - - struct gfx_op op; - init_gfx_op(&op, vmode_g); - op.x = ALIGN_DOWN(x, 8); - op.y = y; - op.op = GO_READ8; - handle_gfx_op(&op); - - return op.pixels[x & 0x07]; -} - - -/**************************************************************** - * Text ops - ****************************************************************/ - -// Return the fb offset for the given character address when in text mode. -void * -text_address(struct cursorpos cp) -{ - int stride = GET_BDA(video_cols) * 2; - u32 pageoffset = GET_BDA(video_pagesize) * cp.page; - return (void*)pageoffset + cp.y * stride + cp.x * 2; -} - -// Move characters on screen. -static void -vgafb_move_chars(struct cursorpos dest, struct cursorpos movesize, int lines) -{ - struct vgamode_s *vmode_g = get_current_mode(); - if (!vmode_g) - return; - - if (GET_GLOBAL(vmode_g->memmodel) != MM_TEXT) { - gfx_move_chars(vmode_g, dest, movesize, lines); - return; - } - - int stride = GET_BDA(video_cols) * 2; - void *dest_addr = text_address(dest), *src_addr = dest_addr + lines * stride; - memmove_stride(GET_GLOBAL(vmode_g->sstart), dest_addr, src_addr - , movesize.x * 2, stride, movesize.y); -} - -// Clear area of screen. -static void -vgafb_clear_chars(struct cursorpos win, struct cursorpos winsize - , struct carattr ca) -{ - struct vgamode_s *vmode_g = get_current_mode(); - if (!vmode_g) - return; - - if (GET_GLOBAL(vmode_g->memmodel) != MM_TEXT) { - gfx_clear_chars(vmode_g, win, winsize, ca); - return; - } - - int stride = GET_BDA(video_cols) * 2; - u16 attr = ((ca.use_attr ? ca.attr : 0x07) << 8) | ca.car; - memset16_stride(GET_GLOBAL(vmode_g->sstart), text_address(win), attr - , winsize.x * 2, stride, winsize.y); -} - -// Scroll characters within a window on the screen -void -vgafb_scroll(struct cursorpos win, struct cursorpos winsize - , int lines, struct carattr ca) -{ - if (!lines) { - // Clear window - vgafb_clear_chars(win, winsize, ca); - } else if (lines > 0) { - // Scroll the window up (eg, from page down key) - winsize.y -= lines; - vgafb_move_chars(win, winsize, lines); - - win.y += winsize.y; - winsize.y = lines; - vgafb_clear_chars(win, winsize, ca); - } else { - // Scroll the window down (eg, from page up key) - win.y -= lines; - winsize.y += lines; - vgafb_move_chars(win, winsize, lines); - - win.y += lines; - winsize.y = -lines; - vgafb_clear_chars(win, winsize, ca); - } -} - -// Write a character to the screen. -void -vgafb_write_char(struct cursorpos cp, struct carattr ca) -{ - struct vgamode_s *vmode_g = get_current_mode(); - if (!vmode_g) - return; - - if (GET_GLOBAL(vmode_g->memmodel) != MM_TEXT) { - gfx_write_char(vmode_g, cp, ca); - return; - } - - void *dest_far = text_address(cp); - if (ca.use_attr) { - u16 dummy = (ca.attr << 8) | ca.car; - SET_FARVAR(GET_GLOBAL(vmode_g->sstart), *(u16*)dest_far, dummy); - } else { - SET_FARVAR(GET_GLOBAL(vmode_g->sstart), *(u8*)dest_far, ca.car); - } -} - -// Return the character at the given position on the screen. -struct carattr -vgafb_read_char(struct cursorpos cp) -{ - struct vgamode_s *vmode_g = get_current_mode(); - if (!vmode_g) - return (struct carattr){0, 0, 0}; - - if (GET_GLOBAL(vmode_g->memmodel) != MM_TEXT) - return gfx_read_char(vmode_g, cp); - - u16 *dest_far = text_address(cp); - u16 v = GET_FARVAR(GET_GLOBAL(vmode_g->sstart), *dest_far); - return (struct carattr){v, v>>8, 0}; -} diff --git a/payloads/external/SeaBIOS/vgasrc/vgafb.h b/payloads/external/SeaBIOS/vgasrc/vgafb.h deleted file mode 100644 index aae6b9b3..00000000 --- a/payloads/external/SeaBIOS/vgasrc/vgafb.h +++ /dev/null @@ -1,43 +0,0 @@ -#ifndef __VGAFB_H -#define __VGAFB_H - -// Graphics pixel operations. -struct gfx_op { - struct vgamode_s *vmode_g; - u32 linelength; - u32 displaystart; - - u8 op; - u16 x, y; - - u8 pixels[8]; - u16 xlen, ylen; - u16 srcy; -}; - -#define GO_READ8 1 -#define GO_WRITE8 2 -#define GO_MEMSET 3 -#define GO_MEMMOVE 4 - -struct cursorpos { - u8 x, y, page, pad; -}; - -struct carattr { - u8 car, attr, use_attr, pad; -}; - -// vgafb.c -void memcpy_high(void *dest, void *src, u32 len); -void init_gfx_op(struct gfx_op *op, struct vgamode_s *vmode_g); -void handle_gfx_op(struct gfx_op *op); -void *text_address(struct cursorpos cp); -void vgafb_scroll(struct cursorpos win, struct cursorpos winsize - , int lines, struct carattr ca); -void vgafb_write_char(struct cursorpos cp, struct carattr ca); -struct carattr vgafb_read_char(struct cursorpos cp); -void vgafb_write_pixel(u8 color, u16 x, u16 y); -u8 vgafb_read_pixel(u16 x, u16 y); - -#endif // vgafb.h diff --git a/payloads/external/SeaBIOS/vgasrc/vgafonts.c b/payloads/external/SeaBIOS/vgasrc/vgafonts.c deleted file mode 100644 index e64ef6c9..00000000 --- a/payloads/external/SeaBIOS/vgasrc/vgafonts.c +++ /dev/null @@ -1,785 +0,0 @@ -#include "vgautil.h" // vgafont8 - -/* - * These fonts come from ftp://ftp.simtel.net/pub/simtelnet/msdos/screen/fntcol16.zip - * The package is (c) by Joseph Gil - * The individual fonts are public domain - */ -u8 vgafont8[256 * 8] VAR16 = { - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x7e, 0x81, 0xa5, 0x81, 0xbd, 0x99, 0x81, 0x7e, - 0x7e, 0xff, 0xdb, 0xff, 0xc3, 0xe7, 0xff, 0x7e, - 0x6c, 0xfe, 0xfe, 0xfe, 0x7c, 0x38, 0x10, 0x00, - 0x10, 0x38, 0x7c, 0xfe, 0x7c, 0x38, 0x10, 0x00, - 0x38, 0x7c, 0x38, 0xfe, 0xfe, 0x7c, 0x38, 0x7c, - 0x10, 0x10, 0x38, 0x7c, 0xfe, 0x7c, 0x38, 0x7c, - 0x00, 0x00, 0x18, 0x3c, 0x3c, 0x18, 0x00, 0x00, - 0xff, 0xff, 0xe7, 0xc3, 0xc3, 0xe7, 0xff, 0xff, - 0x00, 0x3c, 0x66, 0x42, 0x42, 0x66, 0x3c, 0x00, - 0xff, 0xc3, 0x99, 0xbd, 0xbd, 0x99, 0xc3, 0xff, - 0x0f, 0x07, 0x0f, 0x7d, 0xcc, 0xcc, 0xcc, 0x78, - 0x3c, 0x66, 0x66, 0x66, 0x3c, 0x18, 0x7e, 0x18, - 0x3f, 0x33, 0x3f, 0x30, 0x30, 0x70, 0xf0, 0xe0, - 0x7f, 0x63, 0x7f, 0x63, 0x63, 0x67, 0xe6, 0xc0, - 0x99, 0x5a, 0x3c, 0xe7, 0xe7, 0x3c, 0x5a, 0x99, - 0x80, 0xe0, 0xf8, 0xfe, 0xf8, 0xe0, 0x80, 0x00, - 0x02, 0x0e, 0x3e, 0xfe, 0x3e, 0x0e, 0x02, 0x00, - 0x18, 0x3c, 0x7e, 0x18, 0x18, 0x7e, 0x3c, 0x18, - 0x66, 0x66, 0x66, 0x66, 0x66, 0x00, 0x66, 0x00, - 0x7f, 0xdb, 0xdb, 0x7b, 0x1b, 0x1b, 0x1b, 0x00, - 0x3e, 0x63, 0x38, 0x6c, 0x6c, 0x38, 0xcc, 0x78, - 0x00, 0x00, 0x00, 0x00, 0x7e, 0x7e, 0x7e, 0x00, - 0x18, 0x3c, 0x7e, 0x18, 0x7e, 0x3c, 0x18, 0xff, - 0x18, 0x3c, 0x7e, 0x18, 0x18, 0x18, 0x18, 0x00, - 0x18, 0x18, 0x18, 0x18, 0x7e, 0x3c, 0x18, 0x00, - 0x00, 0x18, 0x0c, 0xfe, 0x0c, 0x18, 0x00, 0x00, - 0x00, 0x30, 0x60, 0xfe, 0x60, 0x30, 0x00, 0x00, - 0x00, 0x00, 0xc0, 0xc0, 0xc0, 0xfe, 0x00, 0x00, - 0x00, 0x24, 0x66, 0xff, 0x66, 0x24, 0x00, 0x00, - 0x00, 0x18, 0x3c, 0x7e, 0xff, 0xff, 0x00, 0x00, - 0x00, 0xff, 0xff, 0x7e, 0x3c, 0x18, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x30, 0x78, 0x78, 0x30, 0x30, 0x00, 0x30, 0x00, - 0x6c, 0x6c, 0x6c, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x6c, 0x6c, 0xfe, 0x6c, 0xfe, 0x6c, 0x6c, 0x00, - 0x30, 0x7c, 0xc0, 0x78, 0x0c, 0xf8, 0x30, 0x00, - 0x00, 0xc6, 0xcc, 0x18, 0x30, 0x66, 0xc6, 0x00, - 0x38, 0x6c, 0x38, 0x76, 0xdc, 0xcc, 0x76, 0x00, - 0x60, 0x60, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x18, 0x30, 0x60, 0x60, 0x60, 0x30, 0x18, 0x00, - 0x60, 0x30, 0x18, 0x18, 0x18, 0x30, 0x60, 0x00, - 0x00, 0x66, 0x3c, 0xff, 0x3c, 0x66, 0x00, 0x00, - 0x00, 0x30, 0x30, 0xfc, 0x30, 0x30, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x30, 0x60, - 0x00, 0x00, 0x00, 0xfc, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x30, 0x00, - 0x06, 0x0c, 0x18, 0x30, 0x60, 0xc0, 0x80, 0x00, - 0x7c, 0xc6, 0xce, 0xde, 0xf6, 0xe6, 0x7c, 0x00, - 0x30, 0x70, 0x30, 0x30, 0x30, 0x30, 0xfc, 0x00, - 0x78, 0xcc, 0x0c, 0x38, 0x60, 0xcc, 0xfc, 0x00, - 0x78, 0xcc, 0x0c, 0x38, 0x0c, 0xcc, 0x78, 0x00, - 0x1c, 0x3c, 0x6c, 0xcc, 0xfe, 0x0c, 0x1e, 0x00, - 0xfc, 0xc0, 0xf8, 0x0c, 0x0c, 0xcc, 0x78, 0x00, - 0x38, 0x60, 0xc0, 0xf8, 0xcc, 0xcc, 0x78, 0x00, - 0xfc, 0xcc, 0x0c, 0x18, 0x30, 0x30, 0x30, 0x00, - 0x78, 0xcc, 0xcc, 0x78, 0xcc, 0xcc, 0x78, 0x00, - 0x78, 0xcc, 0xcc, 0x7c, 0x0c, 0x18, 0x70, 0x00, - 0x00, 0x30, 0x30, 0x00, 0x00, 0x30, 0x30, 0x00, - 0x00, 0x30, 0x30, 0x00, 0x00, 0x30, 0x30, 0x60, - 0x18, 0x30, 0x60, 0xc0, 0x60, 0x30, 0x18, 0x00, - 0x00, 0x00, 0xfc, 0x00, 0x00, 0xfc, 0x00, 0x00, - 0x60, 0x30, 0x18, 0x0c, 0x18, 0x30, 0x60, 0x00, - 0x78, 0xcc, 0x0c, 0x18, 0x30, 0x00, 0x30, 0x00, - 0x7c, 0xc6, 0xde, 0xde, 0xde, 0xc0, 0x78, 0x00, - 0x30, 0x78, 0xcc, 0xcc, 0xfc, 0xcc, 0xcc, 0x00, - 0xfc, 0x66, 0x66, 0x7c, 0x66, 0x66, 0xfc, 0x00, - 0x3c, 0x66, 0xc0, 0xc0, 0xc0, 0x66, 0x3c, 0x00, - 0xf8, 0x6c, 0x66, 0x66, 0x66, 0x6c, 0xf8, 0x00, - 0xfe, 0x62, 0x68, 0x78, 0x68, 0x62, 0xfe, 0x00, - 0xfe, 0x62, 0x68, 0x78, 0x68, 0x60, 0xf0, 0x00, - 0x3c, 0x66, 0xc0, 0xc0, 0xce, 0x66, 0x3e, 0x00, - 0xcc, 0xcc, 0xcc, 0xfc, 0xcc, 0xcc, 0xcc, 0x00, - 0x78, 0x30, 0x30, 0x30, 0x30, 0x30, 0x78, 0x00, - 0x1e, 0x0c, 0x0c, 0x0c, 0xcc, 0xcc, 0x78, 0x00, - 0xe6, 0x66, 0x6c, 0x78, 0x6c, 0x66, 0xe6, 0x00, - 0xf0, 0x60, 0x60, 0x60, 0x62, 0x66, 0xfe, 0x00, - 0xc6, 0xee, 0xfe, 0xfe, 0xd6, 0xc6, 0xc6, 0x00, - 0xc6, 0xe6, 0xf6, 0xde, 0xce, 0xc6, 0xc6, 0x00, - 0x38, 0x6c, 0xc6, 0xc6, 0xc6, 0x6c, 0x38, 0x00, - 0xfc, 0x66, 0x66, 0x7c, 0x60, 0x60, 0xf0, 0x00, - 0x78, 0xcc, 0xcc, 0xcc, 0xdc, 0x78, 0x1c, 0x00, - 0xfc, 0x66, 0x66, 0x7c, 0x6c, 0x66, 0xe6, 0x00, - 0x78, 0xcc, 0xe0, 0x70, 0x1c, 0xcc, 0x78, 0x00, - 0xfc, 0xb4, 0x30, 0x30, 0x30, 0x30, 0x78, 0x00, - 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0xfc, 0x00, - 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0x78, 0x30, 0x00, - 0xc6, 0xc6, 0xc6, 0xd6, 0xfe, 0xee, 0xc6, 0x00, - 0xc6, 0xc6, 0x6c, 0x38, 0x38, 0x6c, 0xc6, 0x00, - 0xcc, 0xcc, 0xcc, 0x78, 0x30, 0x30, 0x78, 0x00, - 0xfe, 0xc6, 0x8c, 0x18, 0x32, 0x66, 0xfe, 0x00, - 0x78, 0x60, 0x60, 0x60, 0x60, 0x60, 0x78, 0x00, - 0xc0, 0x60, 0x30, 0x18, 0x0c, 0x06, 0x02, 0x00, - 0x78, 0x18, 0x18, 0x18, 0x18, 0x18, 0x78, 0x00, - 0x10, 0x38, 0x6c, 0xc6, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, - 0x30, 0x30, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x78, 0x0c, 0x7c, 0xcc, 0x76, 0x00, - 0xe0, 0x60, 0x60, 0x7c, 0x66, 0x66, 0xdc, 0x00, - 0x00, 0x00, 0x78, 0xcc, 0xc0, 0xcc, 0x78, 0x00, - 0x1c, 0x0c, 0x0c, 0x7c, 0xcc, 0xcc, 0x76, 0x00, - 0x00, 0x00, 0x78, 0xcc, 0xfc, 0xc0, 0x78, 0x00, - 0x38, 0x6c, 0x60, 0xf0, 0x60, 0x60, 0xf0, 0x00, - 0x00, 0x00, 0x76, 0xcc, 0xcc, 0x7c, 0x0c, 0xf8, - 0xe0, 0x60, 0x6c, 0x76, 0x66, 0x66, 0xe6, 0x00, - 0x30, 0x00, 0x70, 0x30, 0x30, 0x30, 0x78, 0x00, - 0x0c, 0x00, 0x0c, 0x0c, 0x0c, 0xcc, 0xcc, 0x78, - 0xe0, 0x60, 0x66, 0x6c, 0x78, 0x6c, 0xe6, 0x00, - 0x70, 0x30, 0x30, 0x30, 0x30, 0x30, 0x78, 0x00, - 0x00, 0x00, 0xcc, 0xfe, 0xfe, 0xd6, 0xc6, 0x00, - 0x00, 0x00, 0xf8, 0xcc, 0xcc, 0xcc, 0xcc, 0x00, - 0x00, 0x00, 0x78, 0xcc, 0xcc, 0xcc, 0x78, 0x00, - 0x00, 0x00, 0xdc, 0x66, 0x66, 0x7c, 0x60, 0xf0, - 0x00, 0x00, 0x76, 0xcc, 0xcc, 0x7c, 0x0c, 0x1e, - 0x00, 0x00, 0xdc, 0x76, 0x66, 0x60, 0xf0, 0x00, - 0x00, 0x00, 0x7c, 0xc0, 0x78, 0x0c, 0xf8, 0x00, - 0x10, 0x30, 0x7c, 0x30, 0x30, 0x34, 0x18, 0x00, - 0x00, 0x00, 0xcc, 0xcc, 0xcc, 0xcc, 0x76, 0x00, - 0x00, 0x00, 0xcc, 0xcc, 0xcc, 0x78, 0x30, 0x00, - 0x00, 0x00, 0xc6, 0xd6, 0xfe, 0xfe, 0x6c, 0x00, - 0x00, 0x00, 0xc6, 0x6c, 0x38, 0x6c, 0xc6, 0x00, - 0x00, 0x00, 0xcc, 0xcc, 0xcc, 0x7c, 0x0c, 0xf8, - 0x00, 0x00, 0xfc, 0x98, 0x30, 0x64, 0xfc, 0x00, - 0x1c, 0x30, 0x30, 0xe0, 0x30, 0x30, 0x1c, 0x00, - 0x18, 0x18, 0x18, 0x00, 0x18, 0x18, 0x18, 0x00, - 0xe0, 0x30, 0x30, 0x1c, 0x30, 0x30, 0xe0, 0x00, - 0x76, 0xdc, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x10, 0x38, 0x6c, 0xc6, 0xc6, 0xfe, 0x00, - 0x78, 0xcc, 0xc0, 0xcc, 0x78, 0x18, 0x0c, 0x78, - 0x00, 0xcc, 0x00, 0xcc, 0xcc, 0xcc, 0x7e, 0x00, - 0x1c, 0x00, 0x78, 0xcc, 0xfc, 0xc0, 0x78, 0x00, - 0x7e, 0xc3, 0x3c, 0x06, 0x3e, 0x66, 0x3f, 0x00, - 0xcc, 0x00, 0x78, 0x0c, 0x7c, 0xcc, 0x7e, 0x00, - 0xe0, 0x00, 0x78, 0x0c, 0x7c, 0xcc, 0x7e, 0x00, - 0x30, 0x30, 0x78, 0x0c, 0x7c, 0xcc, 0x7e, 0x00, - 0x00, 0x00, 0x78, 0xc0, 0xc0, 0x78, 0x0c, 0x38, - 0x7e, 0xc3, 0x3c, 0x66, 0x7e, 0x60, 0x3c, 0x00, - 0xcc, 0x00, 0x78, 0xcc, 0xfc, 0xc0, 0x78, 0x00, - 0xe0, 0x00, 0x78, 0xcc, 0xfc, 0xc0, 0x78, 0x00, - 0xcc, 0x00, 0x70, 0x30, 0x30, 0x30, 0x78, 0x00, - 0x7c, 0xc6, 0x38, 0x18, 0x18, 0x18, 0x3c, 0x00, - 0xe0, 0x00, 0x70, 0x30, 0x30, 0x30, 0x78, 0x00, - 0xc6, 0x38, 0x6c, 0xc6, 0xfe, 0xc6, 0xc6, 0x00, - 0x30, 0x30, 0x00, 0x78, 0xcc, 0xfc, 0xcc, 0x00, - 0x1c, 0x00, 0xfc, 0x60, 0x78, 0x60, 0xfc, 0x00, - 0x00, 0x00, 0x7f, 0x0c, 0x7f, 0xcc, 0x7f, 0x00, - 0x3e, 0x6c, 0xcc, 0xfe, 0xcc, 0xcc, 0xce, 0x00, - 0x78, 0xcc, 0x00, 0x78, 0xcc, 0xcc, 0x78, 0x00, - 0x00, 0xcc, 0x00, 0x78, 0xcc, 0xcc, 0x78, 0x00, - 0x00, 0xe0, 0x00, 0x78, 0xcc, 0xcc, 0x78, 0x00, - 0x78, 0xcc, 0x00, 0xcc, 0xcc, 0xcc, 0x7e, 0x00, - 0x00, 0xe0, 0x00, 0xcc, 0xcc, 0xcc, 0x7e, 0x00, - 0x00, 0xcc, 0x00, 0xcc, 0xcc, 0x7c, 0x0c, 0xf8, - 0xc3, 0x18, 0x3c, 0x66, 0x66, 0x3c, 0x18, 0x00, - 0xcc, 0x00, 0xcc, 0xcc, 0xcc, 0xcc, 0x78, 0x00, - 0x18, 0x18, 0x7e, 0xc0, 0xc0, 0x7e, 0x18, 0x18, - 0x38, 0x6c, 0x64, 0xf0, 0x60, 0xe6, 0xfc, 0x00, - 0xcc, 0xcc, 0x78, 0xfc, 0x30, 0xfc, 0x30, 0x30, - 0xf8, 0xcc, 0xcc, 0xfa, 0xc6, 0xcf, 0xc6, 0xc7, - 0x0e, 0x1b, 0x18, 0x3c, 0x18, 0x18, 0xd8, 0x70, - 0x1c, 0x00, 0x78, 0x0c, 0x7c, 0xcc, 0x7e, 0x00, - 0x38, 0x00, 0x70, 0x30, 0x30, 0x30, 0x78, 0x00, - 0x00, 0x1c, 0x00, 0x78, 0xcc, 0xcc, 0x78, 0x00, - 0x00, 0x1c, 0x00, 0xcc, 0xcc, 0xcc, 0x7e, 0x00, - 0x00, 0xf8, 0x00, 0xf8, 0xcc, 0xcc, 0xcc, 0x00, - 0xfc, 0x00, 0xcc, 0xec, 0xfc, 0xdc, 0xcc, 0x00, - 0x3c, 0x6c, 0x6c, 0x3e, 0x00, 0x7e, 0x00, 0x00, - 0x38, 0x6c, 0x6c, 0x38, 0x00, 0x7c, 0x00, 0x00, - 0x30, 0x00, 0x30, 0x60, 0xc0, 0xcc, 0x78, 0x00, - 0x00, 0x00, 0x00, 0xfc, 0xc0, 0xc0, 0x00, 0x00, - 0x00, 0x00, 0x00, 0xfc, 0x0c, 0x0c, 0x00, 0x00, - 0xc3, 0xc6, 0xcc, 0xde, 0x33, 0x66, 0xcc, 0x0f, - 0xc3, 0xc6, 0xcc, 0xdb, 0x37, 0x6f, 0xcf, 0x03, - 0x18, 0x18, 0x00, 0x18, 0x18, 0x18, 0x18, 0x00, - 0x00, 0x33, 0x66, 0xcc, 0x66, 0x33, 0x00, 0x00, - 0x00, 0xcc, 0x66, 0x33, 0x66, 0xcc, 0x00, 0x00, - 0x22, 0x88, 0x22, 0x88, 0x22, 0x88, 0x22, 0x88, - 0x55, 0xaa, 0x55, 0xaa, 0x55, 0xaa, 0x55, 0xaa, - 0xdb, 0x77, 0xdb, 0xee, 0xdb, 0x77, 0xdb, 0xee, - 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, - 0x18, 0x18, 0x18, 0x18, 0xf8, 0x18, 0x18, 0x18, - 0x18, 0x18, 0xf8, 0x18, 0xf8, 0x18, 0x18, 0x18, - 0x36, 0x36, 0x36, 0x36, 0xf6, 0x36, 0x36, 0x36, - 0x00, 0x00, 0x00, 0x00, 0xfe, 0x36, 0x36, 0x36, - 0x00, 0x00, 0xf8, 0x18, 0xf8, 0x18, 0x18, 0x18, - 0x36, 0x36, 0xf6, 0x06, 0xf6, 0x36, 0x36, 0x36, - 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, - 0x00, 0x00, 0xfe, 0x06, 0xf6, 0x36, 0x36, 0x36, - 0x36, 0x36, 0xf6, 0x06, 0xfe, 0x00, 0x00, 0x00, - 0x36, 0x36, 0x36, 0x36, 0xfe, 0x00, 0x00, 0x00, - 0x18, 0x18, 0xf8, 0x18, 0xf8, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0xf8, 0x18, 0x18, 0x18, - 0x18, 0x18, 0x18, 0x18, 0x1f, 0x00, 0x00, 0x00, - 0x18, 0x18, 0x18, 0x18, 0xff, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0xff, 0x18, 0x18, 0x18, - 0x18, 0x18, 0x18, 0x18, 0x1f, 0x18, 0x18, 0x18, - 0x00, 0x00, 0x00, 0x00, 0xff, 0x00, 0x00, 0x00, - 0x18, 0x18, 0x18, 0x18, 0xff, 0x18, 0x18, 0x18, - 0x18, 0x18, 0x1f, 0x18, 0x1f, 0x18, 0x18, 0x18, - 0x36, 0x36, 0x36, 0x36, 0x37, 0x36, 0x36, 0x36, - 0x36, 0x36, 0x37, 0x30, 0x3f, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x3f, 0x30, 0x37, 0x36, 0x36, 0x36, - 0x36, 0x36, 0xf7, 0x00, 0xff, 0x00, 0x00, 0x00, - 0x00, 0x00, 0xff, 0x00, 0xf7, 0x36, 0x36, 0x36, - 0x36, 0x36, 0x37, 0x30, 0x37, 0x36, 0x36, 0x36, - 0x00, 0x00, 0xff, 0x00, 0xff, 0x00, 0x00, 0x00, - 0x36, 0x36, 0xf7, 0x00, 0xf7, 0x36, 0x36, 0x36, - 0x18, 0x18, 0xff, 0x00, 0xff, 0x00, 0x00, 0x00, - 0x36, 0x36, 0x36, 0x36, 0xff, 0x00, 0x00, 0x00, - 0x00, 0x00, 0xff, 0x00, 0xff, 0x18, 0x18, 0x18, - 0x00, 0x00, 0x00, 0x00, 0xff, 0x36, 0x36, 0x36, - 0x36, 0x36, 0x36, 0x36, 0x3f, 0x00, 0x00, 0x00, - 0x18, 0x18, 0x1f, 0x18, 0x1f, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x1f, 0x18, 0x1f, 0x18, 0x18, 0x18, - 0x00, 0x00, 0x00, 0x00, 0x3f, 0x36, 0x36, 0x36, - 0x36, 0x36, 0x36, 0x36, 0xff, 0x36, 0x36, 0x36, - 0x18, 0x18, 0xff, 0x18, 0xff, 0x18, 0x18, 0x18, - 0x18, 0x18, 0x18, 0x18, 0xf8, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x1f, 0x18, 0x18, 0x18, - 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, - 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, - 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, - 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, - 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x76, 0xdc, 0xc8, 0xdc, 0x76, 0x00, - 0x00, 0x78, 0xcc, 0xf8, 0xcc, 0xf8, 0xc0, 0xc0, - 0x00, 0xfc, 0xcc, 0xc0, 0xc0, 0xc0, 0xc0, 0x00, - 0x00, 0xfe, 0x6c, 0x6c, 0x6c, 0x6c, 0x6c, 0x00, - 0xfc, 0xcc, 0x60, 0x30, 0x60, 0xcc, 0xfc, 0x00, - 0x00, 0x00, 0x7e, 0xd8, 0xd8, 0xd8, 0x70, 0x00, - 0x00, 0x66, 0x66, 0x66, 0x66, 0x7c, 0x60, 0xc0, - 0x00, 0x76, 0xdc, 0x18, 0x18, 0x18, 0x18, 0x00, - 0xfc, 0x30, 0x78, 0xcc, 0xcc, 0x78, 0x30, 0xfc, - 0x38, 0x6c, 0xc6, 0xfe, 0xc6, 0x6c, 0x38, 0x00, - 0x38, 0x6c, 0xc6, 0xc6, 0x6c, 0x6c, 0xee, 0x00, - 0x1c, 0x30, 0x18, 0x7c, 0xcc, 0xcc, 0x78, 0x00, - 0x00, 0x00, 0x7e, 0xdb, 0xdb, 0x7e, 0x00, 0x00, - 0x06, 0x0c, 0x7e, 0xdb, 0xdb, 0x7e, 0x60, 0xc0, - 0x38, 0x60, 0xc0, 0xf8, 0xc0, 0x60, 0x38, 0x00, - 0x78, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0x00, - 0x00, 0xfc, 0x00, 0xfc, 0x00, 0xfc, 0x00, 0x00, - 0x30, 0x30, 0xfc, 0x30, 0x30, 0x00, 0xfc, 0x00, - 0x60, 0x30, 0x18, 0x30, 0x60, 0x00, 0xfc, 0x00, - 0x18, 0x30, 0x60, 0x30, 0x18, 0x00, 0xfc, 0x00, - 0x0e, 0x1b, 0x1b, 0x18, 0x18, 0x18, 0x18, 0x18, - 0x18, 0x18, 0x18, 0x18, 0x18, 0xd8, 0xd8, 0x70, - 0x30, 0x30, 0x00, 0xfc, 0x00, 0x30, 0x30, 0x00, - 0x00, 0x76, 0xdc, 0x00, 0x76, 0xdc, 0x00, 0x00, - 0x38, 0x6c, 0x6c, 0x38, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x18, 0x18, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, - 0x0f, 0x0c, 0x0c, 0x0c, 0xec, 0x6c, 0x3c, 0x1c, - 0x78, 0x6c, 0x6c, 0x6c, 0x6c, 0x00, 0x00, 0x00, - 0x70, 0x18, 0x30, 0x60, 0x78, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x3c, 0x3c, 0x3c, 0x3c, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 -}; - -u8 vgafont14[256 * 14] VAR16 = { - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x7e, 0x81, 0xa5, 0x81, 0x81, 0xbd, 0x99, 0x81, 0x7e, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x7e, 0xff, 0xdb, 0xff, 0xff, 0xc3, 0xe7, 0xff, 0x7e, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x6c, 0xfe, 0xfe, 0xfe, 0xfe, 0x7c, 0x38, 0x10, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x10, 0x38, 0x7c, 0xfe, 0x7c, 0x38, 0x10, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x18, 0x3c, 0x3c, 0xe7, 0xe7, 0xe7, 0x18, 0x18, 0x3c, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x18, 0x3c, 0x7e, 0xff, 0xff, 0x7e, 0x18, 0x18, 0x3c, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x3c, 0x3c, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, - 0xff, 0xff, 0xff, 0xff, 0xff, 0xe7, 0xc3, 0xc3, 0xe7, 0xff, 0xff, 0xff, 0xff, 0xff, - 0x00, 0x00, 0x00, 0x00, 0x3c, 0x66, 0x42, 0x42, 0x66, 0x3c, 0x00, 0x00, 0x00, 0x00, - 0xff, 0xff, 0xff, 0xff, 0xc3, 0x99, 0xbd, 0xbd, 0x99, 0xc3, 0xff, 0xff, 0xff, 0xff, - 0x00, 0x00, 0x1e, 0x0e, 0x1a, 0x32, 0x78, 0xcc, 0xcc, 0xcc, 0x78, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x3c, 0x66, 0x66, 0x66, 0x3c, 0x18, 0x7e, 0x18, 0x18, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x3f, 0x33, 0x3f, 0x30, 0x30, 0x30, 0x70, 0xf0, 0xe0, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x7f, 0x63, 0x7f, 0x63, 0x63, 0x63, 0x67, 0xe7, 0xe6, 0xc0, 0x00, 0x00, - 0x00, 0x00, 0x18, 0x18, 0xdb, 0x3c, 0xe7, 0x3c, 0xdb, 0x18, 0x18, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x80, 0xc0, 0xe0, 0xf8, 0xfe, 0xf8, 0xe0, 0xc0, 0x80, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x02, 0x06, 0x0e, 0x3e, 0xfe, 0x3e, 0x0e, 0x06, 0x02, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x18, 0x3c, 0x7e, 0x18, 0x18, 0x18, 0x7e, 0x3c, 0x18, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x66, 0x66, 0x66, 0x66, 0x66, 0x66, 0x00, 0x66, 0x66, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x7f, 0xdb, 0xdb, 0xdb, 0x7b, 0x1b, 0x1b, 0x1b, 0x1b, 0x00, 0x00, 0x00, - 0x00, 0x7c, 0xc6, 0x60, 0x38, 0x6c, 0xc6, 0xc6, 0x6c, 0x38, 0x0c, 0xc6, 0x7c, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xfe, 0xfe, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x18, 0x3c, 0x7e, 0x18, 0x18, 0x18, 0x7e, 0x3c, 0x18, 0x7e, 0x00, 0x00, - 0x00, 0x00, 0x18, 0x3c, 0x7e, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x7e, 0x3c, 0x18, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x18, 0x0c, 0xfe, 0x0c, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x30, 0x60, 0xfe, 0x60, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0xc0, 0xc0, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x28, 0x6c, 0xfe, 0x6c, 0x28, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x10, 0x38, 0x38, 0x7c, 0x7c, 0xfe, 0xfe, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0xfe, 0xfe, 0x7c, 0x7c, 0x38, 0x38, 0x10, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x18, 0x3c, 0x3c, 0x3c, 0x18, 0x18, 0x00, 0x18, 0x18, 0x00, 0x00, 0x00, - 0x00, 0x66, 0x66, 0x66, 0x24, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x6c, 0x6c, 0xfe, 0x6c, 0x6c, 0x6c, 0xfe, 0x6c, 0x6c, 0x00, 0x00, 0x00, - 0x18, 0x18, 0x7c, 0xc6, 0xc2, 0xc0, 0x7c, 0x06, 0x86, 0xc6, 0x7c, 0x18, 0x18, 0x00, - 0x00, 0x00, 0x00, 0x00, 0xc2, 0xc6, 0x0c, 0x18, 0x30, 0x66, 0xc6, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x38, 0x6c, 0x6c, 0x38, 0x76, 0xdc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, - 0x00, 0x30, 0x30, 0x30, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x0c, 0x18, 0x30, 0x30, 0x30, 0x30, 0x30, 0x18, 0x0c, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x30, 0x18, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x18, 0x30, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x66, 0x3c, 0xff, 0x3c, 0x66, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x7e, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x18, 0x30, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x02, 0x06, 0x0c, 0x18, 0x30, 0x60, 0xc0, 0x80, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x7c, 0xc6, 0xce, 0xde, 0xf6, 0xe6, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x18, 0x38, 0x78, 0x18, 0x18, 0x18, 0x18, 0x18, 0x7e, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x7c, 0xc6, 0x06, 0x0c, 0x18, 0x30, 0x60, 0xc6, 0xfe, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x7c, 0xc6, 0x06, 0x06, 0x3c, 0x06, 0x06, 0xc6, 0x7c, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x0c, 0x1c, 0x3c, 0x6c, 0xcc, 0xfe, 0x0c, 0x0c, 0x1e, 0x00, 0x00, 0x00, - 0x00, 0x00, 0xfe, 0xc0, 0xc0, 0xc0, 0xfc, 0x06, 0x06, 0xc6, 0x7c, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x38, 0x60, 0xc0, 0xc0, 0xfc, 0xc6, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, - 0x00, 0x00, 0xfe, 0xc6, 0x06, 0x0c, 0x18, 0x30, 0x30, 0x30, 0x30, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0x7c, 0xc6, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0x7e, 0x06, 0x06, 0x0c, 0x78, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x18, 0x18, 0x00, 0x00, 0x00, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x18, 0x18, 0x00, 0x00, 0x00, 0x18, 0x18, 0x30, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x06, 0x0c, 0x18, 0x30, 0x60, 0x30, 0x18, 0x0c, 0x06, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x7e, 0x00, 0x00, 0x7e, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x60, 0x30, 0x18, 0x0c, 0x06, 0x0c, 0x18, 0x30, 0x60, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x7c, 0xc6, 0xc6, 0x0c, 0x18, 0x18, 0x00, 0x18, 0x18, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x7c, 0xc6, 0xc6, 0xde, 0xde, 0xde, 0xdc, 0xc0, 0x7c, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x10, 0x38, 0x6c, 0xc6, 0xc6, 0xfe, 0xc6, 0xc6, 0xc6, 0x00, 0x00, 0x00, - 0x00, 0x00, 0xfc, 0x66, 0x66, 0x66, 0x7c, 0x66, 0x66, 0x66, 0xfc, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x3c, 0x66, 0xc2, 0xc0, 0xc0, 0xc0, 0xc2, 0x66, 0x3c, 0x00, 0x00, 0x00, - 0x00, 0x00, 0xf8, 0x6c, 0x66, 0x66, 0x66, 0x66, 0x66, 0x6c, 0xf8, 0x00, 0x00, 0x00, - 0x00, 0x00, 0xfe, 0x66, 0x62, 0x68, 0x78, 0x68, 0x62, 0x66, 0xfe, 0x00, 0x00, 0x00, - 0x00, 0x00, 0xfe, 0x66, 0x62, 0x68, 0x78, 0x68, 0x60, 0x60, 0xf0, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x3c, 0x66, 0xc2, 0xc0, 0xc0, 0xde, 0xc6, 0x66, 0x3a, 0x00, 0x00, 0x00, - 0x00, 0x00, 0xc6, 0xc6, 0xc6, 0xc6, 0xfe, 0xc6, 0xc6, 0xc6, 0xc6, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x3c, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x3c, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x1e, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0xcc, 0xcc, 0x78, 0x00, 0x00, 0x00, - 0x00, 0x00, 0xe6, 0x66, 0x6c, 0x6c, 0x78, 0x6c, 0x6c, 0x66, 0xe6, 0x00, 0x00, 0x00, - 0x00, 0x00, 0xf0, 0x60, 0x60, 0x60, 0x60, 0x60, 0x62, 0x66, 0xfe, 0x00, 0x00, 0x00, - 0x00, 0x00, 0xc6, 0xee, 0xfe, 0xfe, 0xd6, 0xc6, 0xc6, 0xc6, 0xc6, 0x00, 0x00, 0x00, - 0x00, 0x00, 0xc6, 0xe6, 0xf6, 0xfe, 0xde, 0xce, 0xc6, 0xc6, 0xc6, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x38, 0x6c, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x6c, 0x38, 0x00, 0x00, 0x00, - 0x00, 0x00, 0xfc, 0x66, 0x66, 0x66, 0x7c, 0x60, 0x60, 0x60, 0xf0, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0xd6, 0xde, 0x7c, 0x0c, 0x0e, 0x00, 0x00, - 0x00, 0x00, 0xfc, 0x66, 0x66, 0x66, 0x7c, 0x6c, 0x66, 0x66, 0xe6, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x7c, 0xc6, 0xc6, 0x60, 0x38, 0x0c, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x7e, 0x7e, 0x5a, 0x18, 0x18, 0x18, 0x18, 0x18, 0x3c, 0x00, 0x00, 0x00, - 0x00, 0x00, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, - 0x00, 0x00, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x6c, 0x38, 0x10, 0x00, 0x00, 0x00, - 0x00, 0x00, 0xc6, 0xc6, 0xc6, 0xc6, 0xd6, 0xd6, 0xfe, 0x7c, 0x6c, 0x00, 0x00, 0x00, - 0x00, 0x00, 0xc6, 0xc6, 0x6c, 0x38, 0x38, 0x38, 0x6c, 0xc6, 0xc6, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x66, 0x66, 0x66, 0x66, 0x3c, 0x18, 0x18, 0x18, 0x3c, 0x00, 0x00, 0x00, - 0x00, 0x00, 0xfe, 0xc6, 0x8c, 0x18, 0x30, 0x60, 0xc2, 0xc6, 0xfe, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x3c, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x3c, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x80, 0xc0, 0xe0, 0x70, 0x38, 0x1c, 0x0e, 0x06, 0x02, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x3c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x3c, 0x00, 0x00, 0x00, - 0x10, 0x38, 0x6c, 0xc6, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x00, - 0x30, 0x30, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x0c, 0x7c, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, - 0x00, 0x00, 0xe0, 0x60, 0x60, 0x78, 0x6c, 0x66, 0x66, 0x66, 0x7c, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6, 0xc0, 0xc0, 0xc6, 0x7c, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x1c, 0x0c, 0x0c, 0x3c, 0x6c, 0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6, 0xfe, 0xc0, 0xc6, 0x7c, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x38, 0x6c, 0x64, 0x60, 0xf0, 0x60, 0x60, 0x60, 0xf0, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x76, 0xcc, 0xcc, 0xcc, 0x7c, 0x0c, 0xcc, 0x78, 0x00, - 0x00, 0x00, 0xe0, 0x60, 0x60, 0x6c, 0x76, 0x66, 0x66, 0x66, 0xe6, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x18, 0x18, 0x00, 0x38, 0x18, 0x18, 0x18, 0x18, 0x3c, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x06, 0x06, 0x00, 0x0e, 0x06, 0x06, 0x06, 0x06, 0x66, 0x66, 0x3c, 0x00, - 0x00, 0x00, 0xe0, 0x60, 0x60, 0x66, 0x6c, 0x78, 0x6c, 0x66, 0xe6, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x38, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x3c, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0xec, 0xfe, 0xd6, 0xd6, 0xd6, 0xc6, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0xdc, 0x66, 0x66, 0x66, 0x66, 0x66, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0xdc, 0x66, 0x66, 0x66, 0x7c, 0x60, 0x60, 0xf0, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x76, 0xcc, 0xcc, 0xcc, 0x7c, 0x0c, 0x0c, 0x1e, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0xdc, 0x76, 0x66, 0x60, 0x60, 0xf0, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6, 0x70, 0x1c, 0xc6, 0x7c, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x10, 0x30, 0x30, 0xfc, 0x30, 0x30, 0x30, 0x36, 0x1c, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x66, 0x66, 0x66, 0x66, 0x3c, 0x18, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0xc6, 0xc6, 0xd6, 0xd6, 0xfe, 0x6c, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0xc6, 0x6c, 0x38, 0x38, 0x6c, 0xc6, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0xc6, 0xc6, 0xc6, 0xc6, 0x7e, 0x06, 0x0c, 0xf8, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xcc, 0x18, 0x30, 0x66, 0xfe, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x0e, 0x18, 0x18, 0x18, 0x70, 0x18, 0x18, 0x18, 0x0e, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x18, 0x18, 0x18, 0x18, 0x00, 0x18, 0x18, 0x18, 0x18, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x70, 0x18, 0x18, 0x18, 0x0e, 0x18, 0x18, 0x18, 0x70, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x76, 0xdc, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x10, 0x38, 0x6c, 0xc6, 0xc6, 0xfe, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x3c, 0x66, 0xc2, 0xc0, 0xc0, 0xc2, 0x66, 0x3c, 0x0c, 0x06, 0x7c, 0x00, - 0x00, 0x00, 0xcc, 0xcc, 0x00, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, - 0x00, 0x0c, 0x18, 0x30, 0x00, 0x7c, 0xc6, 0xfe, 0xc0, 0xc6, 0x7c, 0x00, 0x00, 0x00, - 0x00, 0x10, 0x38, 0x6c, 0x00, 0x78, 0x0c, 0x7c, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, - 0x00, 0x00, 0xcc, 0xcc, 0x00, 0x78, 0x0c, 0x7c, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, - 0x00, 0x60, 0x30, 0x18, 0x00, 0x78, 0x0c, 0x7c, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, - 0x00, 0x38, 0x6c, 0x38, 0x00, 0x78, 0x0c, 0x7c, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x3c, 0x66, 0x60, 0x66, 0x3c, 0x0c, 0x06, 0x3c, 0x00, 0x00, - 0x00, 0x10, 0x38, 0x6c, 0x00, 0x7c, 0xc6, 0xfe, 0xc0, 0xc6, 0x7c, 0x00, 0x00, 0x00, - 0x00, 0x00, 0xcc, 0xcc, 0x00, 0x7c, 0xc6, 0xfe, 0xc0, 0xc6, 0x7c, 0x00, 0x00, 0x00, - 0x00, 0x60, 0x30, 0x18, 0x00, 0x7c, 0xc6, 0xfe, 0xc0, 0xc6, 0x7c, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x66, 0x66, 0x00, 0x38, 0x18, 0x18, 0x18, 0x18, 0x3c, 0x00, 0x00, 0x00, - 0x00, 0x18, 0x3c, 0x66, 0x00, 0x38, 0x18, 0x18, 0x18, 0x18, 0x3c, 0x00, 0x00, 0x00, - 0x00, 0x60, 0x30, 0x18, 0x00, 0x38, 0x18, 0x18, 0x18, 0x18, 0x3c, 0x00, 0x00, 0x00, - 0x00, 0xc6, 0xc6, 0x10, 0x38, 0x6c, 0xc6, 0xc6, 0xfe, 0xc6, 0xc6, 0x00, 0x00, 0x00, - 0x38, 0x6c, 0x38, 0x00, 0x38, 0x6c, 0xc6, 0xc6, 0xfe, 0xc6, 0xc6, 0x00, 0x00, 0x00, - 0x18, 0x30, 0x60, 0x00, 0xfe, 0x66, 0x60, 0x7c, 0x60, 0x66, 0xfe, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0xcc, 0x76, 0x36, 0x7e, 0xd8, 0xd8, 0x6e, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x3e, 0x6c, 0xcc, 0xcc, 0xfe, 0xcc, 0xcc, 0xcc, 0xce, 0x00, 0x00, 0x00, - 0x00, 0x10, 0x38, 0x6c, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, - 0x00, 0x00, 0xc6, 0xc6, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, - 0x00, 0x60, 0x30, 0x18, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, - 0x00, 0x30, 0x78, 0xcc, 0x00, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, - 0x00, 0x60, 0x30, 0x18, 0x00, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, - 0x00, 0x00, 0xc6, 0xc6, 0x00, 0xc6, 0xc6, 0xc6, 0xc6, 0x7e, 0x06, 0x0c, 0x78, 0x00, - 0x00, 0xc6, 0xc6, 0x38, 0x6c, 0xc6, 0xc6, 0xc6, 0xc6, 0x6c, 0x38, 0x00, 0x00, 0x00, - 0x00, 0xc6, 0xc6, 0x00, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, - 0x00, 0x18, 0x18, 0x3c, 0x66, 0x60, 0x60, 0x66, 0x3c, 0x18, 0x18, 0x00, 0x00, 0x00, - 0x00, 0x38, 0x6c, 0x64, 0x60, 0xf0, 0x60, 0x60, 0x60, 0xe6, 0xfc, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x66, 0x66, 0x3c, 0x18, 0x7e, 0x18, 0x7e, 0x18, 0x18, 0x00, 0x00, 0x00, - 0x00, 0xf8, 0xcc, 0xcc, 0xf8, 0xc4, 0xcc, 0xde, 0xcc, 0xcc, 0xc6, 0x00, 0x00, 0x00, - 0x00, 0x0e, 0x1b, 0x18, 0x18, 0x18, 0x7e, 0x18, 0x18, 0x18, 0x18, 0xd8, 0x70, 0x00, - 0x00, 0x18, 0x30, 0x60, 0x00, 0x78, 0x0c, 0x7c, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, - 0x00, 0x0c, 0x18, 0x30, 0x00, 0x38, 0x18, 0x18, 0x18, 0x18, 0x3c, 0x00, 0x00, 0x00, - 0x00, 0x18, 0x30, 0x60, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, - 0x00, 0x18, 0x30, 0x60, 0x00, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x76, 0xdc, 0x00, 0xdc, 0x66, 0x66, 0x66, 0x66, 0x66, 0x00, 0x00, 0x00, - 0x76, 0xdc, 0x00, 0xc6, 0xe6, 0xf6, 0xfe, 0xde, 0xce, 0xc6, 0xc6, 0x00, 0x00, 0x00, - 0x00, 0x3c, 0x6c, 0x6c, 0x3e, 0x00, 0x7e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x38, 0x6c, 0x6c, 0x38, 0x00, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x30, 0x30, 0x00, 0x30, 0x30, 0x60, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xc0, 0xc0, 0xc0, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0x06, 0x06, 0x06, 0x00, 0x00, 0x00, 0x00, - 0x00, 0xc0, 0xc0, 0xc6, 0xcc, 0xd8, 0x30, 0x60, 0xdc, 0x86, 0x0c, 0x18, 0x3e, 0x00, - 0x00, 0xc0, 0xc0, 0xc6, 0xcc, 0xd8, 0x30, 0x66, 0xce, 0x9e, 0x3e, 0x06, 0x06, 0x00, - 0x00, 0x00, 0x18, 0x18, 0x00, 0x18, 0x18, 0x3c, 0x3c, 0x3c, 0x18, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x36, 0x6c, 0xd8, 0x6c, 0x36, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0xd8, 0x6c, 0x36, 0x6c, 0xd8, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x11, 0x44, 0x11, 0x44, 0x11, 0x44, 0x11, 0x44, 0x11, 0x44, 0x11, 0x44, 0x11, 0x44, - 0x55, 0xaa, 0x55, 0xaa, 0x55, 0xaa, 0x55, 0xaa, 0x55, 0xaa, 0x55, 0xaa, 0x55, 0xaa, - 0xdd, 0x77, 0xdd, 0x77, 0xdd, 0x77, 0xdd, 0x77, 0xdd, 0x77, 0xdd, 0x77, 0xdd, 0x77, - 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, - 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0xf8, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, - 0x18, 0x18, 0x18, 0x18, 0x18, 0xf8, 0x18, 0xf8, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, - 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0xf6, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, - 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0x18, 0xf8, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, - 0x36, 0x36, 0x36, 0x36, 0x36, 0xf6, 0x06, 0xf6, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, - 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, - 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0x06, 0xf6, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, - 0x36, 0x36, 0x36, 0x36, 0x36, 0xf6, 0x06, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x18, 0x18, 0x18, 0x18, 0x18, 0xf8, 0x18, 0xf8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, - 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, - 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x1f, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0xff, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, - 0x18, 0x18, 0x18, 0x18, 0x18, 0x1f, 0x18, 0x1f, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, - 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x37, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, - 0x36, 0x36, 0x36, 0x36, 0x36, 0x37, 0x30, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x3f, 0x30, 0x37, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, - 0x36, 0x36, 0x36, 0x36, 0x36, 0xf7, 0x00, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x00, 0xf7, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, - 0x36, 0x36, 0x36, 0x36, 0x36, 0x37, 0x30, 0x37, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, - 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x00, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x36, 0x36, 0x36, 0x36, 0x36, 0xf7, 0x00, 0xf7, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, - 0x18, 0x18, 0x18, 0x18, 0x18, 0xff, 0x00, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x00, 0xff, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, - 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x18, 0x18, 0x18, 0x18, 0x18, 0x1f, 0x18, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x1f, 0x18, 0x1f, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3f, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, - 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0xff, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, - 0x18, 0x18, 0x18, 0x18, 0x18, 0xff, 0x18, 0xff, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, - 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0xf8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1f, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, - 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, - 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, - 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, - 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x76, 0xdc, 0xd8, 0xd8, 0xdc, 0x76, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6, 0xfc, 0xc6, 0xc6, 0xfc, 0xc0, 0xc0, 0x40, 0x00, - 0x00, 0x00, 0xfe, 0xc6, 0xc6, 0xc0, 0xc0, 0xc0, 0xc0, 0xc0, 0xc0, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0xfe, 0x6c, 0x6c, 0x6c, 0x6c, 0x6c, 0x6c, 0x00, 0x00, 0x00, - 0x00, 0x00, 0xfe, 0xc6, 0x60, 0x30, 0x18, 0x30, 0x60, 0xc6, 0xfe, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x7e, 0xd8, 0xd8, 0xd8, 0xd8, 0x70, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x66, 0x66, 0x66, 0x66, 0x7c, 0x60, 0x60, 0xc0, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x76, 0xdc, 0x18, 0x18, 0x18, 0x18, 0x18, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x7e, 0x18, 0x3c, 0x66, 0x66, 0x66, 0x3c, 0x18, 0x7e, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x38, 0x6c, 0xc6, 0xc6, 0xfe, 0xc6, 0xc6, 0x6c, 0x38, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x38, 0x6c, 0xc6, 0xc6, 0xc6, 0x6c, 0x6c, 0x6c, 0xee, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x1e, 0x30, 0x18, 0x0c, 0x3e, 0x66, 0x66, 0x66, 0x3c, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x7e, 0xdb, 0xdb, 0x7e, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x03, 0x06, 0x7e, 0xdb, 0xdb, 0xf3, 0x7e, 0x60, 0xc0, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x1c, 0x30, 0x60, 0x60, 0x7c, 0x60, 0x60, 0x30, 0x1c, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0xfe, 0x00, 0x00, 0xfe, 0x00, 0x00, 0xfe, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x18, 0x18, 0x7e, 0x18, 0x18, 0x00, 0x00, 0xff, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x30, 0x18, 0x0c, 0x06, 0x0c, 0x18, 0x30, 0x00, 0x7e, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x0c, 0x18, 0x30, 0x60, 0x30, 0x18, 0x0c, 0x00, 0x7e, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x0e, 0x1b, 0x1b, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, - 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0xd8, 0xd8, 0x70, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x18, 0x18, 0x00, 0x7e, 0x00, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x76, 0xdc, 0x00, 0x76, 0xdc, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x38, 0x6c, 0x6c, 0x38, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x0f, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0xec, 0x6c, 0x3c, 0x1c, 0x00, 0x00, 0x00, - 0x00, 0xd8, 0x6c, 0x6c, 0x6c, 0x6c, 0x6c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x70, 0xd8, 0x30, 0x60, 0xc8, 0xf8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x7c, 0x7c, 0x7c, 0x7c, 0x7c, 0x7c, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 -}; - -u8 vgafont16[256 * 16] VAR16 = { - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x7e, 0x81, 0xa5, 0x81, 0x81, 0xbd, 0x99, 0x81, 0x81, 0x7e, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x7e, 0xff, 0xdb, 0xff, 0xff, 0xc3, 0xe7, 0xff, 0xff, 0x7e, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x6c, 0xfe, 0xfe, 0xfe, 0xfe, 0x7c, 0x38, 0x10, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x10, 0x38, 0x7c, 0xfe, 0x7c, 0x38, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x18, 0x3c, 0x3c, 0xe7, 0xe7, 0xe7, 0x18, 0x18, 0x3c, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x18, 0x3c, 0x7e, 0xff, 0xff, 0x7e, 0x18, 0x18, 0x3c, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x3c, 0x3c, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xe7, 0xc3, 0xc3, 0xe7, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x66, 0x42, 0x42, 0x66, 0x3c, 0x00, 0x00, 0x00, 0x00, 0x00, - 0xff, 0xff, 0xff, 0xff, 0xff, 0xc3, 0x99, 0xbd, 0xbd, 0x99, 0xc3, 0xff, 0xff, 0xff, 0xff, 0xff, - 0x00, 0x00, 0x1e, 0x0e, 0x1a, 0x32, 0x78, 0xcc, 0xcc, 0xcc, 0xcc, 0x78, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x3c, 0x66, 0x66, 0x66, 0x66, 0x3c, 0x18, 0x7e, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x3f, 0x33, 0x3f, 0x30, 0x30, 0x30, 0x30, 0x70, 0xf0, 0xe0, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x7f, 0x63, 0x7f, 0x63, 0x63, 0x63, 0x63, 0x67, 0xe7, 0xe6, 0xc0, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x18, 0x18, 0xdb, 0x3c, 0xe7, 0x3c, 0xdb, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x80, 0xc0, 0xe0, 0xf0, 0xf8, 0xfe, 0xf8, 0xf0, 0xe0, 0xc0, 0x80, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x02, 0x06, 0x0e, 0x1e, 0x3e, 0xfe, 0x3e, 0x1e, 0x0e, 0x06, 0x02, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x18, 0x3c, 0x7e, 0x18, 0x18, 0x18, 0x7e, 0x3c, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x66, 0x66, 0x66, 0x66, 0x66, 0x66, 0x66, 0x00, 0x66, 0x66, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x7f, 0xdb, 0xdb, 0xdb, 0x7b, 0x1b, 0x1b, 0x1b, 0x1b, 0x1b, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x7c, 0xc6, 0x60, 0x38, 0x6c, 0xc6, 0xc6, 0x6c, 0x38, 0x0c, 0xc6, 0x7c, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xfe, 0xfe, 0xfe, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x18, 0x3c, 0x7e, 0x18, 0x18, 0x18, 0x7e, 0x3c, 0x18, 0x7e, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x18, 0x3c, 0x7e, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x7e, 0x3c, 0x18, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x0c, 0xfe, 0x0c, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x60, 0xfe, 0x60, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0xc0, 0xc0, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x24, 0x66, 0xff, 0x66, 0x24, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x10, 0x38, 0x38, 0x7c, 0x7c, 0xfe, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0xfe, 0xfe, 0x7c, 0x7c, 0x38, 0x38, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x18, 0x3c, 0x3c, 0x3c, 0x18, 0x18, 0x18, 0x00, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x66, 0x66, 0x66, 0x24, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x6c, 0x6c, 0xfe, 0x6c, 0x6c, 0x6c, 0xfe, 0x6c, 0x6c, 0x00, 0x00, 0x00, 0x00, - 0x18, 0x18, 0x7c, 0xc6, 0xc2, 0xc0, 0x7c, 0x06, 0x06, 0x86, 0xc6, 0x7c, 0x18, 0x18, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0xc2, 0xc6, 0x0c, 0x18, 0x30, 0x60, 0xc6, 0x86, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x38, 0x6c, 0x6c, 0x38, 0x76, 0xdc, 0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x30, 0x30, 0x30, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x0c, 0x18, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x18, 0x0c, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x30, 0x18, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x18, 0x30, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x66, 0x3c, 0xff, 0x3c, 0x66, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x7e, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x18, 0x30, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x02, 0x06, 0x0c, 0x18, 0x30, 0x60, 0xc0, 0x80, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x3c, 0x66, 0xc3, 0xc3, 0xdb, 0xdb, 0xc3, 0xc3, 0x66, 0x3c, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x18, 0x38, 0x78, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x7e, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x7c, 0xc6, 0x06, 0x0c, 0x18, 0x30, 0x60, 0xc0, 0xc6, 0xfe, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x7c, 0xc6, 0x06, 0x06, 0x3c, 0x06, 0x06, 0x06, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x0c, 0x1c, 0x3c, 0x6c, 0xcc, 0xfe, 0x0c, 0x0c, 0x0c, 0x1e, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0xfe, 0xc0, 0xc0, 0xc0, 0xfc, 0x06, 0x06, 0x06, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x38, 0x60, 0xc0, 0xc0, 0xfc, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0xfe, 0xc6, 0x06, 0x06, 0x0c, 0x18, 0x30, 0x30, 0x30, 0x30, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0x7e, 0x06, 0x06, 0x06, 0x0c, 0x78, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x00, 0x00, 0x00, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x00, 0x00, 0x00, 0x18, 0x18, 0x30, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x06, 0x0c, 0x18, 0x30, 0x60, 0x30, 0x18, 0x0c, 0x06, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x7e, 0x00, 0x00, 0x7e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x60, 0x30, 0x18, 0x0c, 0x06, 0x0c, 0x18, 0x30, 0x60, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x7c, 0xc6, 0xc6, 0x0c, 0x18, 0x18, 0x18, 0x00, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x7c, 0xc6, 0xc6, 0xde, 0xde, 0xde, 0xdc, 0xc0, 0x7c, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x10, 0x38, 0x6c, 0xc6, 0xc6, 0xfe, 0xc6, 0xc6, 0xc6, 0xc6, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0xfc, 0x66, 0x66, 0x66, 0x7c, 0x66, 0x66, 0x66, 0x66, 0xfc, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x3c, 0x66, 0xc2, 0xc0, 0xc0, 0xc0, 0xc0, 0xc2, 0x66, 0x3c, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0xf8, 0x6c, 0x66, 0x66, 0x66, 0x66, 0x66, 0x66, 0x6c, 0xf8, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0xfe, 0x66, 0x62, 0x68, 0x78, 0x68, 0x60, 0x62, 0x66, 0xfe, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0xfe, 0x66, 0x62, 0x68, 0x78, 0x68, 0x60, 0x60, 0x60, 0xf0, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x3c, 0x66, 0xc2, 0xc0, 0xc0, 0xde, 0xc6, 0xc6, 0x66, 0x3a, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0xc6, 0xc6, 0xc6, 0xc6, 0xfe, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x3c, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x3c, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x1e, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0xcc, 0xcc, 0xcc, 0x78, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0xe6, 0x66, 0x66, 0x6c, 0x78, 0x78, 0x6c, 0x66, 0x66, 0xe6, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0xf0, 0x60, 0x60, 0x60, 0x60, 0x60, 0x60, 0x62, 0x66, 0xfe, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0xc3, 0xe7, 0xff, 0xff, 0xdb, 0xc3, 0xc3, 0xc3, 0xc3, 0xc3, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0xc6, 0xe6, 0xf6, 0xfe, 0xde, 0xce, 0xc6, 0xc6, 0xc6, 0xc6, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0xfc, 0x66, 0x66, 0x66, 0x7c, 0x60, 0x60, 0x60, 0x60, 0xf0, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xd6, 0xde, 0x7c, 0x0c, 0x0e, 0x00, 0x00, - 0x00, 0x00, 0xfc, 0x66, 0x66, 0x66, 0x7c, 0x6c, 0x66, 0x66, 0x66, 0xe6, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x7c, 0xc6, 0xc6, 0x60, 0x38, 0x0c, 0x06, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0xff, 0xdb, 0x99, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x3c, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0xc3, 0xc3, 0xc3, 0xc3, 0xc3, 0xc3, 0xc3, 0x66, 0x3c, 0x18, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0xc3, 0xc3, 0xc3, 0xc3, 0xc3, 0xdb, 0xdb, 0xff, 0x66, 0x66, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0xc3, 0xc3, 0x66, 0x3c, 0x18, 0x18, 0x3c, 0x66, 0xc3, 0xc3, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0xc3, 0xc3, 0xc3, 0x66, 0x3c, 0x18, 0x18, 0x18, 0x18, 0x3c, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0xff, 0xc3, 0x86, 0x0c, 0x18, 0x30, 0x60, 0xc1, 0xc3, 0xff, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x3c, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x3c, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x80, 0xc0, 0xe0, 0x70, 0x38, 0x1c, 0x0e, 0x06, 0x02, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x3c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x3c, 0x00, 0x00, 0x00, 0x00, - 0x10, 0x38, 0x6c, 0xc6, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x00, 0x00, - 0x30, 0x30, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x0c, 0x7c, 0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0xe0, 0x60, 0x60, 0x78, 0x6c, 0x66, 0x66, 0x66, 0x66, 0x7c, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6, 0xc0, 0xc0, 0xc0, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x1c, 0x0c, 0x0c, 0x3c, 0x6c, 0xcc, 0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6, 0xfe, 0xc0, 0xc0, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x38, 0x6c, 0x64, 0x60, 0xf0, 0x60, 0x60, 0x60, 0x60, 0xf0, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x76, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0x7c, 0x0c, 0xcc, 0x78, 0x00, - 0x00, 0x00, 0xe0, 0x60, 0x60, 0x6c, 0x76, 0x66, 0x66, 0x66, 0x66, 0xe6, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x18, 0x18, 0x00, 0x38, 0x18, 0x18, 0x18, 0x18, 0x18, 0x3c, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x06, 0x06, 0x00, 0x0e, 0x06, 0x06, 0x06, 0x06, 0x06, 0x06, 0x66, 0x66, 0x3c, 0x00, - 0x00, 0x00, 0xe0, 0x60, 0x60, 0x66, 0x6c, 0x78, 0x78, 0x6c, 0x66, 0xe6, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x38, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x3c, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0xe6, 0xff, 0xdb, 0xdb, 0xdb, 0xdb, 0xdb, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0xdc, 0x66, 0x66, 0x66, 0x66, 0x66, 0x66, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0xdc, 0x66, 0x66, 0x66, 0x66, 0x66, 0x7c, 0x60, 0x60, 0xf0, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x76, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0x7c, 0x0c, 0x0c, 0x1e, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0xdc, 0x76, 0x66, 0x60, 0x60, 0x60, 0xf0, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6, 0x60, 0x38, 0x0c, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x10, 0x30, 0x30, 0xfc, 0x30, 0x30, 0x30, 0x30, 0x36, 0x1c, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0xc3, 0xc3, 0xc3, 0xc3, 0x66, 0x3c, 0x18, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0xc3, 0xc3, 0xc3, 0xdb, 0xdb, 0xff, 0x66, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0xc3, 0x66, 0x3c, 0x18, 0x3c, 0x66, 0xc3, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x7e, 0x06, 0x0c, 0xf8, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xcc, 0x18, 0x30, 0x60, 0xc6, 0xfe, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x0e, 0x18, 0x18, 0x18, 0x70, 0x18, 0x18, 0x18, 0x18, 0x0e, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x18, 0x18, 0x18, 0x18, 0x00, 0x18, 0x18, 0x18, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x70, 0x18, 0x18, 0x18, 0x0e, 0x18, 0x18, 0x18, 0x18, 0x70, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x76, 0xdc, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x10, 0x38, 0x6c, 0xc6, 0xc6, 0xc6, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x3c, 0x66, 0xc2, 0xc0, 0xc0, 0xc0, 0xc2, 0x66, 0x3c, 0x0c, 0x06, 0x7c, 0x00, 0x00, - 0x00, 0x00, 0xcc, 0x00, 0x00, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x0c, 0x18, 0x30, 0x00, 0x7c, 0xc6, 0xfe, 0xc0, 0xc0, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x10, 0x38, 0x6c, 0x00, 0x78, 0x0c, 0x7c, 0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0xcc, 0x00, 0x00, 0x78, 0x0c, 0x7c, 0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x60, 0x30, 0x18, 0x00, 0x78, 0x0c, 0x7c, 0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x38, 0x6c, 0x38, 0x00, 0x78, 0x0c, 0x7c, 0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x3c, 0x66, 0x60, 0x60, 0x66, 0x3c, 0x0c, 0x06, 0x3c, 0x00, 0x00, 0x00, - 0x00, 0x10, 0x38, 0x6c, 0x00, 0x7c, 0xc6, 0xfe, 0xc0, 0xc0, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0xc6, 0x00, 0x00, 0x7c, 0xc6, 0xfe, 0xc0, 0xc0, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x60, 0x30, 0x18, 0x00, 0x7c, 0xc6, 0xfe, 0xc0, 0xc0, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x66, 0x00, 0x00, 0x38, 0x18, 0x18, 0x18, 0x18, 0x18, 0x3c, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x18, 0x3c, 0x66, 0x00, 0x38, 0x18, 0x18, 0x18, 0x18, 0x18, 0x3c, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x60, 0x30, 0x18, 0x00, 0x38, 0x18, 0x18, 0x18, 0x18, 0x18, 0x3c, 0x00, 0x00, 0x00, 0x00, - 0x00, 0xc6, 0x00, 0x10, 0x38, 0x6c, 0xc6, 0xc6, 0xfe, 0xc6, 0xc6, 0xc6, 0x00, 0x00, 0x00, 0x00, - 0x38, 0x6c, 0x38, 0x00, 0x38, 0x6c, 0xc6, 0xc6, 0xfe, 0xc6, 0xc6, 0xc6, 0x00, 0x00, 0x00, 0x00, - 0x18, 0x30, 0x60, 0x00, 0xfe, 0x66, 0x60, 0x7c, 0x60, 0x60, 0x66, 0xfe, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x6e, 0x3b, 0x1b, 0x7e, 0xd8, 0xdc, 0x77, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x3e, 0x6c, 0xcc, 0xcc, 0xfe, 0xcc, 0xcc, 0xcc, 0xcc, 0xce, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x10, 0x38, 0x6c, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0xc6, 0x00, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x60, 0x30, 0x18, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x30, 0x78, 0xcc, 0x00, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x60, 0x30, 0x18, 0x00, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0xc6, 0x00, 0x00, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x7e, 0x06, 0x0c, 0x78, 0x00, - 0x00, 0xc6, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, - 0x00, 0xc6, 0x00, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x18, 0x18, 0x7e, 0xc3, 0xc0, 0xc0, 0xc0, 0xc3, 0x7e, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x38, 0x6c, 0x64, 0x60, 0xf0, 0x60, 0x60, 0x60, 0x60, 0xe6, 0xfc, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0xc3, 0x66, 0x3c, 0x18, 0xff, 0x18, 0xff, 0x18, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, - 0x00, 0xfc, 0x66, 0x66, 0x7c, 0x62, 0x66, 0x6f, 0x66, 0x66, 0x66, 0xf3, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x0e, 0x1b, 0x18, 0x18, 0x18, 0x7e, 0x18, 0x18, 0x18, 0x18, 0x18, 0xd8, 0x70, 0x00, 0x00, - 0x00, 0x18, 0x30, 0x60, 0x00, 0x78, 0x0c, 0x7c, 0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x0c, 0x18, 0x30, 0x00, 0x38, 0x18, 0x18, 0x18, 0x18, 0x18, 0x3c, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x18, 0x30, 0x60, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x18, 0x30, 0x60, 0x00, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x76, 0xdc, 0x00, 0xdc, 0x66, 0x66, 0x66, 0x66, 0x66, 0x66, 0x00, 0x00, 0x00, 0x00, - 0x76, 0xdc, 0x00, 0xc6, 0xe6, 0xf6, 0xfe, 0xde, 0xce, 0xc6, 0xc6, 0xc6, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x3c, 0x6c, 0x6c, 0x3e, 0x00, 0x7e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x38, 0x6c, 0x6c, 0x38, 0x00, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x30, 0x30, 0x00, 0x30, 0x30, 0x60, 0xc0, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xc0, 0xc0, 0xc0, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0x06, 0x06, 0x06, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0xc0, 0xc0, 0xc2, 0xc6, 0xcc, 0x18, 0x30, 0x60, 0xce, 0x9b, 0x06, 0x0c, 0x1f, 0x00, 0x00, - 0x00, 0xc0, 0xc0, 0xc2, 0xc6, 0xcc, 0x18, 0x30, 0x66, 0xce, 0x96, 0x3e, 0x06, 0x06, 0x00, 0x00, - 0x00, 0x00, 0x18, 0x18, 0x00, 0x18, 0x18, 0x18, 0x3c, 0x3c, 0x3c, 0x18, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x36, 0x6c, 0xd8, 0x6c, 0x36, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0xd8, 0x6c, 0x36, 0x6c, 0xd8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x11, 0x44, 0x11, 0x44, 0x11, 0x44, 0x11, 0x44, 0x11, 0x44, 0x11, 0x44, 0x11, 0x44, 0x11, 0x44, - 0x55, 0xaa, 0x55, 0xaa, 0x55, 0xaa, 0x55, 0xaa, 0x55, 0xaa, 0x55, 0xaa, 0x55, 0xaa, 0x55, 0xaa, - 0xdd, 0x77, 0xdd, 0x77, 0xdd, 0x77, 0xdd, 0x77, 0xdd, 0x77, 0xdd, 0x77, 0xdd, 0x77, 0xdd, 0x77, - 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, - 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0xf8, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, - 0x18, 0x18, 0x18, 0x18, 0x18, 0xf8, 0x18, 0xf8, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, - 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0xf6, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, - 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0x18, 0xf8, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, - 0x36, 0x36, 0x36, 0x36, 0x36, 0xf6, 0x06, 0xf6, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, - 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, - 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0x06, 0xf6, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, - 0x36, 0x36, 0x36, 0x36, 0x36, 0xf6, 0x06, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x18, 0x18, 0x18, 0x18, 0x18, 0xf8, 0x18, 0xf8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, - 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, - 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x1f, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0xff, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, - 0x18, 0x18, 0x18, 0x18, 0x18, 0x1f, 0x18, 0x1f, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, - 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x37, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, - 0x36, 0x36, 0x36, 0x36, 0x36, 0x37, 0x30, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x3f, 0x30, 0x37, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, - 0x36, 0x36, 0x36, 0x36, 0x36, 0xf7, 0x00, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x00, 0xf7, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, - 0x36, 0x36, 0x36, 0x36, 0x36, 0x37, 0x30, 0x37, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, - 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x00, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x36, 0x36, 0x36, 0x36, 0x36, 0xf7, 0x00, 0xf7, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, - 0x18, 0x18, 0x18, 0x18, 0x18, 0xff, 0x00, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x00, 0xff, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, - 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x18, 0x18, 0x18, 0x18, 0x18, 0x1f, 0x18, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x1f, 0x18, 0x1f, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3f, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, - 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0xff, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, - 0x18, 0x18, 0x18, 0x18, 0x18, 0xff, 0x18, 0xff, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, - 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0xf8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1f, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, - 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, - 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, - 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, - 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x76, 0xdc, 0xd8, 0xd8, 0xd8, 0xdc, 0x76, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x78, 0xcc, 0xcc, 0xcc, 0xd8, 0xcc, 0xc6, 0xc6, 0xc6, 0xcc, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0xfe, 0xc6, 0xc6, 0xc0, 0xc0, 0xc0, 0xc0, 0xc0, 0xc0, 0xc0, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0xfe, 0x6c, 0x6c, 0x6c, 0x6c, 0x6c, 0x6c, 0x6c, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0xfe, 0xc6, 0x60, 0x30, 0x18, 0x30, 0x60, 0xc6, 0xfe, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x7e, 0xd8, 0xd8, 0xd8, 0xd8, 0xd8, 0x70, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x66, 0x66, 0x66, 0x66, 0x66, 0x7c, 0x60, 0x60, 0xc0, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x76, 0xdc, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x7e, 0x18, 0x3c, 0x66, 0x66, 0x66, 0x3c, 0x18, 0x7e, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x38, 0x6c, 0xc6, 0xc6, 0xfe, 0xc6, 0xc6, 0x6c, 0x38, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x38, 0x6c, 0xc6, 0xc6, 0xc6, 0x6c, 0x6c, 0x6c, 0x6c, 0xee, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x1e, 0x30, 0x18, 0x0c, 0x3e, 0x66, 0x66, 0x66, 0x66, 0x3c, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x7e, 0xdb, 0xdb, 0xdb, 0x7e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x03, 0x06, 0x7e, 0xdb, 0xdb, 0xf3, 0x7e, 0x60, 0xc0, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x1c, 0x30, 0x60, 0x60, 0x7c, 0x60, 0x60, 0x60, 0x30, 0x1c, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0xfe, 0x00, 0x00, 0xfe, 0x00, 0x00, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x7e, 0x18, 0x18, 0x00, 0x00, 0xff, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x30, 0x18, 0x0c, 0x06, 0x0c, 0x18, 0x30, 0x00, 0x7e, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x0c, 0x18, 0x30, 0x60, 0x30, 0x18, 0x0c, 0x00, 0x7e, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x0e, 0x1b, 0x1b, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, - 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0xd8, 0xd8, 0xd8, 0x70, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x00, 0x7e, 0x00, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x76, 0xdc, 0x00, 0x76, 0xdc, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x38, 0x6c, 0x6c, 0x38, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x0f, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0xec, 0x6c, 0x6c, 0x3c, 0x1c, 0x00, 0x00, 0x00, 0x00, - 0x00, 0xd8, 0x6c, 0x6c, 0x6c, 0x6c, 0x6c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x70, 0xd8, 0x30, 0x60, 0xc8, 0xf8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x7c, 0x7c, 0x7c, 0x7c, 0x7c, 0x7c, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 -}; -u8 vgafont14alt[1] VAR16; -u8 vgafont16alt[1] VAR16; diff --git a/payloads/external/SeaBIOS/vgasrc/vgahw.h b/payloads/external/SeaBIOS/vgasrc/vgahw.h deleted file mode 100644 index 8b64660e..00000000 --- a/payloads/external/SeaBIOS/vgasrc/vgahw.h +++ /dev/null @@ -1,160 +0,0 @@ -#ifndef __VGAHW_H -#define __VGAHW_H - -#include "types.h" // u8 -#include "config.h" // CONFIG_* - -#include "bochsvga.h" // bochsvga_set_mode -#include "stdvga.h" // stdvga_set_mode -#include "geodevga.h" // geodevga_setup -#include "vgautil.h" // stdvga_list_modes - -static inline struct vgamode_s *vgahw_find_mode(int mode) { - if (CONFIG_VGA_CIRRUS) - return clext_find_mode(mode); - if (CONFIG_VGA_ATI) - return ati_find_mode(mode); - if (CONFIG_VGA_BOCHS) - return bochsvga_find_mode(mode); - if (CONFIG_VGA_EMULATE_TEXT) - return cbvga_find_mode(mode); - return stdvga_find_mode(mode); -} - -static inline int vgahw_set_mode(struct vgamode_s *vmode_g, int flags) { - if (CONFIG_VGA_CIRRUS) - return clext_set_mode(vmode_g, flags); - if (CONFIG_VGA_ATI) - return ati_set_mode(vmode_g, flags); - if (CONFIG_VGA_BOCHS) - return bochsvga_set_mode(vmode_g, flags); - if (CONFIG_VGA_EMULATE_TEXT) - return cbvga_set_mode(vmode_g, flags); - return stdvga_set_mode(vmode_g, flags); -} - -static inline void vgahw_list_modes(u16 seg, u16 *dest, u16 *last) { - if (CONFIG_VGA_CIRRUS) - clext_list_modes(seg, dest, last); - else if (CONFIG_VGA_ATI) - ati_list_modes(seg, dest, last); - else if (CONFIG_VGA_BOCHS) - bochsvga_list_modes(seg, dest, last); - else if (CONFIG_VGA_EMULATE_TEXT) - cbvga_list_modes(seg, dest, last); - else - stdvga_list_modes(seg, dest, last); -} - -static inline int vgahw_setup(void) { - if (CONFIG_VGA_CIRRUS) - return clext_setup(); - if (CONFIG_VGA_ATI) - return ati_setup(); - if (CONFIG_VGA_BOCHS) - return bochsvga_setup(); - if (CONFIG_VGA_GEODEGX2 || CONFIG_VGA_GEODELX) - return geodevga_setup(); - if (CONFIG_VGA_COREBOOT) - return cbvga_setup(); - if (CONFIG_DISPLAY_BOCHS) - return bochs_display_setup(); - if (CONFIG_VGA_RAMFB) - return ramfb_setup(); - return stdvga_setup(); -} - -static inline int vgahw_get_window(struct vgamode_s *vmode_g, int window) { - if (CONFIG_VGA_CIRRUS) - return clext_get_window(vmode_g, window); - if (CONFIG_VGA_BOCHS) - return bochsvga_get_window(vmode_g, window); - if (CONFIG_VGA_EMULATE_TEXT) - return cbvga_get_window(vmode_g, window); - return stdvga_get_window(vmode_g, window); -} - -static inline int vgahw_set_window(struct vgamode_s *vmode_g, int window - , int val) { - if (CONFIG_VGA_CIRRUS) - return clext_set_window(vmode_g, window, val); - if (CONFIG_VGA_BOCHS) - return bochsvga_set_window(vmode_g, window, val); - if (CONFIG_VGA_EMULATE_TEXT) - return cbvga_set_window(vmode_g, window, val); - return stdvga_set_window(vmode_g, window, val); -} - -static inline int vgahw_get_linelength(struct vgamode_s *vmode_g) { - if (CONFIG_VGA_CIRRUS) - return clext_get_linelength(vmode_g); - if (CONFIG_VGA_BOCHS) - return bochsvga_get_linelength(vmode_g); - if (CONFIG_VGA_EMULATE_TEXT) - return cbvga_get_linelength(vmode_g); - return stdvga_get_linelength(vmode_g); -} - -static inline int vgahw_set_linelength(struct vgamode_s *vmode_g, int val) { - if (CONFIG_VGA_CIRRUS) - return clext_set_linelength(vmode_g, val); - if (CONFIG_VGA_BOCHS) - return bochsvga_set_linelength(vmode_g, val); - if (CONFIG_VGA_EMULATE_TEXT) - return cbvga_set_linelength(vmode_g, val); - return stdvga_set_linelength(vmode_g, val); -} - -static inline int vgahw_get_displaystart(struct vgamode_s *vmode_g) { - if (CONFIG_VGA_CIRRUS) - return clext_get_displaystart(vmode_g); - if (CONFIG_VGA_BOCHS) - return bochsvga_get_displaystart(vmode_g); - if (CONFIG_VGA_EMULATE_TEXT) - return cbvga_get_displaystart(vmode_g); - return stdvga_get_displaystart(vmode_g); -} - -static inline int vgahw_set_displaystart(struct vgamode_s *vmode_g, int val) { - if (CONFIG_VGA_CIRRUS) - return clext_set_displaystart(vmode_g, val); - if (CONFIG_VGA_BOCHS) - return bochsvga_set_displaystart(vmode_g, val); - if (CONFIG_VGA_EMULATE_TEXT) - return cbvga_set_displaystart(vmode_g, val); - return stdvga_set_displaystart(vmode_g, val); -} - -static inline int vgahw_get_dacformat(struct vgamode_s *vmode_g) { - if (CONFIG_VGA_BOCHS) - return bochsvga_get_dacformat(vmode_g); - if (CONFIG_VGA_EMULATE_TEXT) - return cbvga_get_dacformat(vmode_g); - return stdvga_get_dacformat(vmode_g); -} - -static inline int vgahw_set_dacformat(struct vgamode_s *vmode_g, int val) { - if (CONFIG_VGA_BOCHS) - return bochsvga_set_dacformat(vmode_g, val); - if (CONFIG_VGA_EMULATE_TEXT) - return cbvga_set_dacformat(vmode_g, val); - return stdvga_set_dacformat(vmode_g, val); -} - -static inline int vgahw_save_restore(int cmd, u16 seg, void *data) { - if (CONFIG_VGA_CIRRUS) - return clext_save_restore(cmd, seg, data); - if (CONFIG_VGA_BOCHS) - return bochsvga_save_restore(cmd, seg, data); - if (CONFIG_VGA_EMULATE_TEXT) - return cbvga_save_restore(cmd, seg, data); - return stdvga_save_restore(cmd, seg, data); -} - -static inline int vgahw_get_linesize(struct vgamode_s *vmode_g) { - if (CONFIG_VGA_EMULATE_TEXT) - return cbvga_get_linesize(vmode_g); - return stdvga_get_linesize(vmode_g); -} - -#endif // vgahw.h diff --git a/payloads/external/SeaBIOS/vgasrc/vgainit.c b/payloads/external/SeaBIOS/vgasrc/vgainit.c deleted file mode 100644 index d6a297e3..00000000 --- a/payloads/external/SeaBIOS/vgasrc/vgainit.c +++ /dev/null @@ -1,202 +0,0 @@ -// Main VGA bios initialization -// -// Copyright (C) 2009-2013 Kevin O'Connor <kevin@koconnor.net> -// Copyright (C) 2001-2008 the LGPL VGABios developers Team -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -#include "biosvar.h" // SET_BDA -#include "bregs.h" // struct bregs -#include "hw/pci.h" // pci_config_readw -#include "hw/pci_regs.h" // PCI_VENDOR_ID -#include "hw/serialio.h" // serial_debug_preinit -#include "output.h" // dprintf -#include "std/optionrom.h" // struct pci_data -#include "std/pmm.h" // struct pmmheader -#include "string.h" // checksum_far -#include "vgabios.h" // SET_VGA -#include "vgahw.h" // vgahw_setup -#include "vgautil.h" // swcursor_check_event - -// Type of emulator platform - for dprintf with certain compile options. -int PlatformRunningOn VAR16; - - -/**************************************************************** - * PCI Data - ****************************************************************/ - -struct pci_data rom_pci_data VAR16 VISIBLE16 = { - .signature = PCI_ROM_SIGNATURE, - .vendor = CONFIG_VGA_VID, - .device = CONFIG_VGA_DID, - .dlen = 0x18, - .class_hi = 0x300, - .irevision = 1, - .type = PCIROM_CODETYPE_X86, - .indicator = 0x80, -}; - - -/**************************************************************** - * PMM call and extra stack setup - ****************************************************************/ - -u32 -allocate_pmm(u32 size, int highmem, int aligned) -{ - u32 pmmscan; - for (pmmscan=0; pmmscan < BUILD_BIOS_SIZE; pmmscan+=16) { - struct pmmheader *pmm = (void*)pmmscan; - if (GET_FARVAR(SEG_BIOS, pmm->signature) != PMM_SIGNATURE) - continue; - if (checksum_far(SEG_BIOS, pmm, GET_FARVAR(SEG_BIOS, pmm->length))) - continue; - struct segoff_s entry = GET_FARVAR(SEG_BIOS, pmm->entry); - dprintf(1, "Attempting to allocate %u bytes %s via pmm call to %04x:%04x\n" - , size, highmem ? "highmem" : "lowmem" - , entry.seg, entry.offset); - u16 res1, res2; - u16 flags = 8 | - ( highmem ? 2 : 1 )| - ( aligned ? 4 : 0 ); - size >>= 4; - asm volatile( - "pushl %0\n" - "pushw %2\n" // flags - "pushl $0xffffffff\n" // Anonymous handle - "pushl %1\n" // size - "pushw $0x00\n" // PMM allocation request - "lcallw *12(%%esp)\n" - "addl $16, %%esp\n" - "cli\n" - "cld\n" - : "+r" (entry.segoff), "+r" (size), "+r" (flags), - "=a" (res1), "=d" (res2) : : "cc", "memory"); - u32 res = res1 | (res2 << 16); - if (!res || res == PMM_FUNCTION_NOT_SUPPORTED) - return 0; - return res; - } - return 0; -} - -u16 ExtraStackSeg VAR16 VISIBLE16; - -static void -allocate_extra_stack(void) -{ - if (!CONFIG_VGA_ALLOCATE_EXTRA_STACK) - return; - u32 res = allocate_pmm(CONFIG_VGA_EXTRA_STACK_SIZE, 0, 0); - if (!res) - return; - dprintf(1, "VGA stack allocated at %x\n", res); - SET_VGA(ExtraStackSeg, res >> 4); - extern void entry_10_extrastack(void); - SET_IVT(0x10, SEGOFF(get_global_seg(), (u32)entry_10_extrastack)); - return; -} - - -/**************************************************************** - * Timer hook - ****************************************************************/ - -struct segoff_s Timer_Hook_Resume VAR16 VISIBLE16; - -void VISIBLE16 -handle_timer_hook(void) -{ - swcursor_check_event(); -} - -static void -hook_timer_irq(void) -{ - if (!CONFIG_VGA_EMULATE_TEXT) - return; - extern void entry_timer_hook(void); - extern void entry_timer_hook_extrastack(void); - struct segoff_s oldirq = GET_IVT(0x08); - struct segoff_s newirq = SEGOFF(get_global_seg(), (u32)entry_timer_hook); - if (CONFIG_VGA_ALLOCATE_EXTRA_STACK && GET_GLOBAL(ExtraStackSeg)) - newirq = SEGOFF(get_global_seg(), (u32)entry_timer_hook_extrastack); - dprintf(1, "Hooking hardware timer irq (old=%x new=%x)\n" - , oldirq.segoff, newirq.segoff); - SET_VGA(Timer_Hook_Resume, oldirq); - SET_IVT(0x08, newirq); -} - - -/**************************************************************** - * VGA post - ****************************************************************/ - -static void -init_bios_area(void) -{ - // init detected hardware BIOS Area - // set 80x25 color (not clear from RBIL but usual) - set_equipment_flags(0x30, 0x20); - - // Set the basic modeset options - SET_BDA(modeset_ctl, 0x51); - - SET_BDA(dcc_index, CONFIG_VGA_STDVGA_PORTS ? 0x08 : 0xff); - - // FIXME - SET_BDA(video_msr, 0x00); // Unavailable on vanilla vga, but... - SET_BDA(video_pal, 0x00); // Unavailable on vanilla vga, but... -} - -int VgaBDF VAR16 = -1; -int HaveRunInit VAR16; - -void VISIBLE16 -vga_post(struct bregs *regs) -{ - serial_debug_preinit(); - dprintf(1, "Start SeaVGABIOS (version %s)\n", VERSION); - dprintf(1, "VGABUILD: %s\n", BUILDINFO); - debug_enter(regs, DEBUG_VGA_POST); - - if (CONFIG_VGA_PCI && !GET_GLOBAL(HaveRunInit)) { - u16 bdf = regs->ax; - if ((pci_config_readw(bdf, PCI_VENDOR_ID) - == GET_GLOBAL(rom_pci_data.vendor)) - && (pci_config_readw(bdf, PCI_DEVICE_ID) - == GET_GLOBAL(rom_pci_data.device))) - SET_VGA(VgaBDF, bdf); - } - - int ret = vgahw_setup(); - if (ret) { - dprintf(1, "Failed to initialize VGA hardware. Exiting.\n"); - return; - } - - if (GET_GLOBAL(HaveRunInit)) - return; - - init_bios_area(); - - if (CONFIG_VGA_STDVGA_PORTS) - stdvga_build_video_param(); - - extern void entry_10(void); - SET_IVT(0x10, SEGOFF(get_global_seg(), (u32)entry_10)); - - allocate_extra_stack(); - - hook_timer_irq(); - - SET_VGA(HaveRunInit, 1); - - // Fixup checksum - extern u8 _rom_header_size, _rom_header_checksum; - SET_VGA(_rom_header_checksum, 0); - u8 sum = -checksum_far(get_global_seg(), 0, - GET_GLOBAL(_rom_header_size) * 512); - SET_VGA(_rom_header_checksum, sum); -} diff --git a/payloads/external/SeaBIOS/vgasrc/vgalayout.lds.S b/payloads/external/SeaBIOS/vgasrc/vgalayout.lds.S deleted file mode 100644 index c3e4f601..00000000 --- a/payloads/external/SeaBIOS/vgasrc/vgalayout.lds.S +++ /dev/null @@ -1,30 +0,0 @@ -// Linker definitions for an option rom -// -// Copyright (C) 2009 Kevin O'Connor <kevin@koconnor.net> -// -// This file may be distributed under the terms of the GNU LGPLv3 license. - -OUTPUT_FORMAT("elf32-i386", "elf32-i386", "elf32-i386") -OUTPUT_ARCH("i386") -ENTRY(_optionrom_entry) -SECTIONS -{ - .text 0 : { - KEEP(*(.rom.header)) - *(.text.*) - _rodata = . ; - *(.rodata*) - *(.data16.*) - } - - // Discard regular data sections to force a link error if - // 16bit code attempts to access data not marked with VAR16. - /DISCARD/ : { - *(.text*) - *(.rodata*) - *(.data*) - *(.bss*) - *(COMMON) - *(.note*) - } -} diff --git a/payloads/external/SeaBIOS/vgasrc/vgautil.h b/payloads/external/SeaBIOS/vgasrc/vgautil.h deleted file mode 100644 index dd1aa189..00000000 --- a/payloads/external/SeaBIOS/vgasrc/vgautil.h +++ /dev/null @@ -1,110 +0,0 @@ -// Misc function and variable declarations. -#ifndef __VGAUTIL_H -#define __VGAUTIL_H - -#include "types.h" // u8 - -// cbvga.c -struct vgamode_s *cbvga_find_mode(int mode); -void cbvga_list_modes(u16 seg, u16 *dest, u16 *last); -int cbvga_get_window(struct vgamode_s *vmode_g, int window); -int cbvga_set_window(struct vgamode_s *vmode_g, int window, int val); -int cbvga_get_linelength(struct vgamode_s *vmode_g); -int cbvga_set_linelength(struct vgamode_s *vmode_g, int val); -int cbvga_get_displaystart(struct vgamode_s *vmode_g); -int cbvga_set_displaystart(struct vgamode_s *vmode_g, int val); -int cbvga_get_dacformat(struct vgamode_s *vmode_g); -int cbvga_set_dacformat(struct vgamode_s *vmode_g, int val); -int cbvga_save_restore(int cmd, u16 seg, void *data); -int cbvga_set_mode(struct vgamode_s *vmode_g, int flags); -int cbvga_get_linesize(struct vgamode_s *vmode_g); -void cbvga_setup_modes(u64 addr, u8 bpp, u32 xlines, u32 ylines, u32 linelength); -int cbvga_setup(void); - -// bochsdisplay.c -int bochs_display_setup(void); - -// ramfb.c -int ramfb_setup(void); - -// clext.c -struct vgamode_s *clext_find_mode(int mode); -void clext_list_modes(u16 seg, u16 *dest, u16 *last); -int clext_get_window(struct vgamode_s *vmode_g, int window); -int clext_set_window(struct vgamode_s *vmode_g, int window, int val); -int clext_get_linelength(struct vgamode_s *vmode_g); -int clext_set_linelength(struct vgamode_s *vmode_g, int val); -int clext_get_displaystart(struct vgamode_s *vmode_g); -int clext_set_displaystart(struct vgamode_s *vmode_g, int val); -int clext_save_restore(int cmd, u16 seg, void *data); -int clext_set_mode(struct vgamode_s *vmode_g, int flags); -struct bregs; -void clext_1012(struct bregs *regs); -int clext_setup(void); - -// atiext.c -struct vgamode_s *ati_find_mode(int mode); -void ati_list_modes(u16 seg, u16 *dest, u16 *last); -int ati_set_mode(struct vgamode_s *vmode_g, int flags); -int ati_setup(void); - -// stdvgaio.c -u8 stdvga_pelmask_read(void); -void stdvga_pelmask_write(u8 val); -u8 stdvga_misc_read(void); -void stdvga_misc_write(u8 value); -void stdvga_misc_mask(u8 off, u8 on); -u8 stdvga_sequ_read(u8 index); -void stdvga_sequ_write(u8 index, u8 value); -void stdvga_sequ_mask(u8 index, u8 off, u8 on); -u8 stdvga_grdc_read(u8 index); -void stdvga_grdc_write(u8 index, u8 value); -void stdvga_grdc_mask(u8 index, u8 off, u8 on); -u8 stdvga_crtc_read(u16 crtc_addr, u8 index); -void stdvga_crtc_write(u16 crtc_addr, u8 index, u8 value); -void stdvga_crtc_mask(u16 crtc_addr, u8 index, u8 off, u8 on); -u8 stdvga_attr_read(u8 index); -void stdvga_attr_write(u8 index, u8 value); -void stdvga_attr_mask(u8 index, u8 off, u8 on); -u8 stdvga_attrindex_read(void); -void stdvga_attrindex_write(u8 value); -void stdvga_dac_read(u16 seg, u8 *data_far, u8 start, int count); -void stdvga_dac_write(u16 seg, u8 *data_far, u8 start, int count); - -// stdvgamodes.c -struct vgamode_s *stdvga_find_mode(int mode); -void stdvga_list_modes(u16 seg, u16 *dest, u16 *last); -void stdvga_build_video_param(void); -void stdvga_override_crtc(int mode, u8 *crtc); -int stdvga_set_mode(struct vgamode_s *vmode_g, int flags); -int stdvga_get_linesize(struct vgamode_s *vmode_g); -void stdvga_set_packed_palette(void); - -// swcursor.c -void swcursor_pre_handle10(struct bregs *regs); -void swcursor_check_event(void); - -// vbe.c -extern u32 VBE_total_memory; -extern u32 VBE_capabilities; -extern u32 VBE_framebuffer; -extern u16 VBE_win_granularity; -extern u8 VBE_edid[256]; -void handle_104f(struct bregs *regs); - -// vgafonts.c -extern u8 vgafont8[]; -extern u8 vgafont14[]; -extern u8 vgafont16[]; -extern u8 vgafont14alt[]; -extern u8 vgafont16alt[]; - -// vgainit.c -extern int VgaBDF; -extern int HaveRunInit; -u32 allocate_pmm(u32 size, int highmem, int aligned); - -// vgaversion.c -extern const char VERSION[], BUILDINFO[]; - -#endif // vgautil.h diff --git a/payloads/external/SeaBIOS/vgasrc/vgaversion.c b/payloads/external/SeaBIOS/vgasrc/vgaversion.c deleted file mode 100644 index 1ef5ddb7..00000000 --- a/payloads/external/SeaBIOS/vgasrc/vgaversion.c +++ /dev/null @@ -1,6 +0,0 @@ -// Place build generated version into a C variable -#include "autovgaversion.h" -#include "types.h" - -char VERSION[] VAR16 = BUILD_VERSION; -char BUILDINFO[] VAR16 = BUILD_TOOLS; diff --git a/src/mainboard/dell/optiplex_760/early_init.c b/src/mainboard/dell/optiplex_760/early_init.c index 254abde1..1436e09e 100644 --- a/src/mainboard/dell/optiplex_760/early_init.c +++ b/src/mainboard/dell/optiplex_760/early_init.c @@ -3,14 +3,14 @@ #include <bootblock_common.h> #include <southbridge/intel/i82801jx/i82801jx.h> #include <northbridge/intel/x4x/x4x.h> -#include <superio/smsc/smscsuperio/smscsuperio.h> - -#define SERIAL_DEV PNP_DEV(0x2e, SMSCSUPERIO_SP1) void bootblock_mainboard_early_init(void) { - /* Enable Super I/O. */ - smscsuperio_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); + /* Set up GPIOs on Super I/O. */ + + /* Enable 3VSB during Suspend-to-RAM */ + + /* Delay PWROK2 after 3VSBSW# during resume from Suspend-to-RAM */ } void mb_get_spd_map(u8 spd_map[4]) |