diff options
Diffstat (limited to 'plat/fvp/bl2_fvp_setup.c')
| -rw-r--r-- | plat/fvp/bl2_fvp_setup.c | 298 |
1 files changed, 298 insertions, 0 deletions
diff --git a/plat/fvp/bl2_fvp_setup.c b/plat/fvp/bl2_fvp_setup.c new file mode 100644 index 0000000..72580f9 --- /dev/null +++ b/plat/fvp/bl2_fvp_setup.c @@ -0,0 +1,298 @@ +/* + * Copyright (c) 2013-2014, ARM Limited and Contributors. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * Neither the name of ARM nor the names of its contributors may be used + * to endorse or promote products derived from this software without specific + * prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + */ + +#include <arch_helpers.h> +#include <assert.h> +#include <bl_common.h> +#include <console.h> +#include <platform.h> +#include <platform_def.h> +#include <string.h> +#include "fvp_def.h" +#include "fvp_private.h" + +/******************************************************************************* + * Declarations of linker defined symbols which will help us find the layout + * of trusted SRAM + ******************************************************************************/ +extern unsigned long __RO_START__; +extern unsigned long __RO_END__; + +extern unsigned long __COHERENT_RAM_START__; +extern unsigned long __COHERENT_RAM_END__; + +/* + * The next 2 constants identify the extents of the code & RO data region. + * These addresses are used by the MMU setup code and therefore they must be + * page-aligned. It is the responsibility of the linker script to ensure that + * __RO_START__ and __RO_END__ linker symbols refer to page-aligned addresses. + */ +#define BL2_RO_BASE (unsigned long)(&__RO_START__) +#define BL2_RO_LIMIT (unsigned long)(&__RO_END__) + +/* + * The next 2 constants identify the extents of the coherent memory region. + * These addresses are used by the MMU setup code and therefore they must be + * page-aligned. It is the responsibility of the linker script to ensure that + * __COHERENT_RAM_START__ and __COHERENT_RAM_END__ linker symbols refer to + * page-aligned addresses. + */ +#define BL2_COHERENT_RAM_BASE (unsigned long)(&__COHERENT_RAM_START__) +#define BL2_COHERENT_RAM_LIMIT (unsigned long)(&__COHERENT_RAM_END__) + +/* Pointer to memory visible to both BL2 and BL31 for passing data */ +extern unsigned char **bl2_el_change_mem_ptr; + +/* Data structure which holds the extents of the trusted SRAM for BL2 */ +static meminfo_t bl2_tzram_layout +__attribute__ ((aligned(PLATFORM_CACHE_LINE_SIZE), + section("tzfw_coherent_mem"))); + +/******************************************************************************* + * Reference to structures which holds the arguments which need to be passed + * to BL31 + ******************************************************************************/ +static bl31_params_t *bl2_to_bl31_params; +static entry_point_info_t *bl31_ep_info; + +meminfo_t *bl2_plat_sec_mem_layout(void) +{ + return &bl2_tzram_layout; +} + +/******************************************************************************* + * This function assigns a pointer to the memory that the platform has kept + * aside to pass platform specific and trusted firmware related information + * to BL31. This memory is allocated by allocating memory to + * bl2_to_bl31_params_mem_t structure which is a superset of all the + * structure whose information is passed to BL31 + * NOTE: This function should be called only once and should be done + * before generating params to BL31 + ******************************************************************************/ +bl31_params_t *bl2_plat_get_bl31_params(void) +{ + bl2_to_bl31_params_mem_t *bl31_params_mem; + +#if TSP_RAM_LOCATION_ID == TSP_IN_TZDRAM + /* + * Ensure that the secure DRAM memory used for passing BL31 arguments + * does not overlap with the BL32_BASE. + */ + assert(BL32_BASE > PARAMS_BASE + sizeof(bl2_to_bl31_params_mem_t)); +#endif + + /* + * Allocate the memory for all the arguments that needs to + * be passed to BL31 + */ + bl31_params_mem = (bl2_to_bl31_params_mem_t *)PARAMS_BASE; + memset((void *)PARAMS_BASE, 0, sizeof(bl2_to_bl31_params_mem_t)); + + /* Assign memory for TF related information */ + bl2_to_bl31_params = &bl31_params_mem->bl31_params; + SET_PARAM_HEAD(bl2_to_bl31_params, PARAM_BL31, VERSION_1, 0); + + /* Fill BL31 related information */ + bl31_ep_info = &bl31_params_mem->bl31_ep_info; + bl2_to_bl31_params->bl31_image_info = &bl31_params_mem->bl31_image_info; + SET_PARAM_HEAD(bl2_to_bl31_params->bl31_image_info, PARAM_IMAGE_BINARY, + VERSION_1, 0); + + /* Fill BL32 related information if it exists */ + if (BL32_BASE) { + bl2_to_bl31_params->bl32_ep_info = + &bl31_params_mem->bl32_ep_info; + SET_PARAM_HEAD(bl2_to_bl31_params->bl32_ep_info, + PARAM_EP, VERSION_1, 0); + bl2_to_bl31_params->bl32_image_info = + &bl31_params_mem->bl32_image_info; + SET_PARAM_HEAD(bl2_to_bl31_params->bl32_image_info, + PARAM_IMAGE_BINARY, + VERSION_1, 0); + } + + /* Fill BL33 related information */ + bl2_to_bl31_params->bl33_ep_info = &bl31_params_mem->bl33_ep_info; + SET_PARAM_HEAD(bl2_to_bl31_params->bl33_ep_info, + PARAM_EP, VERSION_1, 0); + bl2_to_bl31_params->bl33_image_info = &bl31_params_mem->bl33_image_info; + SET_PARAM_HEAD(bl2_to_bl31_params->bl33_image_info, PARAM_IMAGE_BINARY, + VERSION_1, 0); + + return bl2_to_bl31_params; +} + + +/******************************************************************************* + * This function returns a pointer to the shared memory that the platform + * has kept to point to entry point information of BL31 to BL2 + ******************************************************************************/ +struct entry_point_info *bl2_plat_get_bl31_ep_info(void) +{ +#if DEBUG + bl31_ep_info->args.arg1 = FVP_BL31_PLAT_PARAM_VAL; +#endif + return bl31_ep_info; +} + + +/******************************************************************************* + * BL1 has passed the extents of the trusted SRAM that should be visible to BL2 + * in x0. This memory layout is sitting at the base of the free trusted SRAM. + * Copy it to a safe loaction before its reclaimed by later BL2 functionality. + ******************************************************************************/ +void bl2_early_platform_setup(meminfo_t *mem_layout) +{ + /* Initialize the console to provide early debug support */ + console_init(PL011_UART0_BASE); + + /* Setup the BL2 memory layout */ + bl2_tzram_layout.total_base = mem_layout->total_base; + bl2_tzram_layout.total_size = mem_layout->total_size; + bl2_tzram_layout.free_base = mem_layout->free_base; + bl2_tzram_layout.free_size = mem_layout->free_size; + bl2_tzram_layout.attr = mem_layout->attr; + bl2_tzram_layout.next = 0; + + /* Initialize the platform config for future decision making */ + fvp_config_setup(); +} + +/******************************************************************************* + * Perform platform specific setup. For now just initialize the memory location + * to use for passing arguments to BL31. + ******************************************************************************/ +void bl2_platform_setup(void) +{ + /* + * Do initial security configuration to allow DRAM/device access. On + * Base FVP only DRAM security is programmable (via TrustZone), but + * other platforms might have more programmable security devices + * present. + */ + fvp_security_setup(); + + /* Initialise the IO layer and register platform IO devices */ + fvp_io_setup(); +} + +/* Flush the TF params and the TF plat params */ +void bl2_plat_flush_bl31_params(void) +{ + flush_dcache_range((unsigned long)PARAMS_BASE, \ + sizeof(bl2_to_bl31_params_mem_t)); +} + + +/******************************************************************************* + * Perform the very early platform specific architectural setup here. At the + * moment this is only intializes the mmu in a quick and dirty way. + ******************************************************************************/ +void bl2_plat_arch_setup() +{ + fvp_configure_mmu_el1(bl2_tzram_layout.total_base, + bl2_tzram_layout.total_size, + BL2_RO_BASE, + BL2_RO_LIMIT, + BL2_COHERENT_RAM_BASE, + BL2_COHERENT_RAM_LIMIT); +} + +/******************************************************************************* + * Before calling this function BL31 is loaded in memory and its entrypoint + * is set by load_image. This is a placeholder for the platform to change + * the entrypoint of BL31 and set SPSR and security state. + * On FVP we are only setting the security state, entrypoint + ******************************************************************************/ +void bl2_plat_set_bl31_ep_info(image_info_t *bl31_image_info, + entry_point_info_t *bl31_ep_info) +{ + SET_SECURITY_STATE(bl31_ep_info->h.attr, SECURE); + bl31_ep_info->spsr = SPSR_64(MODE_EL3, MODE_SP_ELX, + DISABLE_ALL_EXCEPTIONS); +} + + +/******************************************************************************* + * Before calling this function BL32 is loaded in memory and its entrypoint + * is set by load_image. This is a placeholder for the platform to change + * the entrypoint of BL32 and set SPSR and security state. + * On FVP we are only setting the security state, entrypoint + ******************************************************************************/ +void bl2_plat_set_bl32_ep_info(image_info_t *bl32_image_info, + entry_point_info_t *bl32_ep_info) +{ + fvp_set_bl32_ep_info(bl32_ep_info); +} + +/******************************************************************************* + * Before calling this function BL33 is loaded in memory and its entrypoint + * is set by load_image. This is a placeholder for the platform to change + * the entrypoint of BL33 and set SPSR and security state. + * On FVP we are only setting the security state, entrypoint + ******************************************************************************/ +void bl2_plat_set_bl33_ep_info(image_info_t *image, + entry_point_info_t *bl33_ep_info) +{ + fvp_set_bl33_ep_info(bl33_ep_info); +} + + +/******************************************************************************* + * Populate the extents of memory available for loading BL32 + ******************************************************************************/ +void bl2_plat_get_bl32_meminfo(meminfo_t *bl32_meminfo) +{ + /* + * Populate the extents of memory available for loading BL32. + */ + bl32_meminfo->total_base = BL32_BASE; + bl32_meminfo->free_base = BL32_BASE; + bl32_meminfo->total_size = + (TSP_SEC_MEM_BASE + TSP_SEC_MEM_SIZE) - BL32_BASE; + bl32_meminfo->free_size = + (TSP_SEC_MEM_BASE + TSP_SEC_MEM_SIZE) - BL32_BASE; + bl32_meminfo->attr = BOT_LOAD; + bl32_meminfo->next = 0; +} + + +/******************************************************************************* + * Populate the extents of memory available for loading BL33 + ******************************************************************************/ +void bl2_plat_get_bl33_meminfo(meminfo_t *bl33_meminfo) +{ + bl33_meminfo->total_base = DRAM_BASE; + bl33_meminfo->total_size = DRAM_SIZE - DRAM1_SEC_SIZE; + bl33_meminfo->free_base = DRAM_BASE; + bl33_meminfo->free_size = DRAM_SIZE - DRAM1_SEC_SIZE; + bl33_meminfo->attr = 0; + bl33_meminfo->attr = 0; +} |