diff options
Diffstat (limited to 'plat/fvp/fvp_def.h')
-rw-r--r-- | plat/fvp/fvp_def.h | 237 |
1 files changed, 237 insertions, 0 deletions
diff --git a/plat/fvp/fvp_def.h b/plat/fvp/fvp_def.h new file mode 100644 index 0000000..04ba611 --- /dev/null +++ b/plat/fvp/fvp_def.h @@ -0,0 +1,237 @@ +/* + * Copyright (c) 2014, ARM Limited and Contributors. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. + * + * Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * Neither the name of ARM nor the names of its contributors may be used + * to endorse or promote products derived from this software without specific + * prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef __FVP_DEF_H__ +#define __FVP_DEF_H__ + +#include <platform_def.h> /* for TZROM_SIZE */ + + +/* Firmware Image Package */ +#define FIP_IMAGE_NAME "fip.bin" + +/* Constants for accessing platform configuration */ +#define CONFIG_GICD_ADDR 0 +#define CONFIG_GICC_ADDR 1 +#define CONFIG_GICH_ADDR 2 +#define CONFIG_GICV_ADDR 3 +#define CONFIG_MAX_AFF0 4 +#define CONFIG_MAX_AFF1 5 +/* Indicate whether the CPUECTLR SMP bit should be enabled. */ +#define CONFIG_CPU_SETUP 6 +#define CONFIG_BASE_MMAP 7 +/* Indicates whether CCI should be enabled on the platform. */ +#define CONFIG_HAS_CCI 8 +#define CONFIG_HAS_TZC 9 +#define CONFIG_LIMIT 10 + +/******************************************************************************* + * FVP memory map related constants + ******************************************************************************/ + +#define FLASH0_BASE 0x08000000 +#define FLASH0_SIZE TZROM_SIZE + +#define FLASH1_BASE 0x0c000000 +#define FLASH1_SIZE 0x04000000 + +#define PSRAM_BASE 0x14000000 +#define PSRAM_SIZE 0x04000000 + +#define VRAM_BASE 0x18000000 +#define VRAM_SIZE 0x02000000 + +/* Aggregate of all devices in the first GB */ +#define DEVICE0_BASE 0x1a000000 +#define DEVICE0_SIZE 0x12200000 + +#define DEVICE1_BASE 0x2f000000 +#define DEVICE1_SIZE 0x200000 + +#define NSRAM_BASE 0x2e000000 +#define NSRAM_SIZE 0x10000 + +#define MBOX_OFF 0x1000 + +/* Base address where parameters to BL31 are stored */ +#define PARAMS_BASE TZDRAM_BASE + +#define DRAM1_BASE 0x80000000ull +#define DRAM1_SIZE 0x80000000ull +#define DRAM1_END (DRAM1_BASE + DRAM1_SIZE - 1) +#define DRAM1_SEC_SIZE 0x01000000ull + +#define DRAM_BASE DRAM1_BASE +#define DRAM_SIZE DRAM1_SIZE + +#define DRAM2_BASE 0x880000000ull +#define DRAM2_SIZE 0x780000000ull +#define DRAM2_END (DRAM2_BASE + DRAM2_SIZE - 1) + +#define PCIE_EXP_BASE 0x40000000 +#define TZRNG_BASE 0x7fe60000 +#define TZNVCTR_BASE 0x7fe70000 +#define TZROOTKEY_BASE 0x7fe80000 + +/* Memory mapped Generic timer interfaces */ +#define SYS_CNTCTL_BASE 0x2a430000 +#define SYS_CNTREAD_BASE 0x2a800000 +#define SYS_TIMCTL_BASE 0x2a810000 + +/* V2M motherboard system registers & offsets */ +#define VE_SYSREGS_BASE 0x1c010000 +#define V2M_SYS_ID 0x0 +#define V2M_SYS_LED 0x8 +#define V2M_SYS_CFGDATA 0xa0 +#define V2M_SYS_CFGCTRL 0xa4 + +/* Load address of BL33 in the FVP port */ +#define NS_IMAGE_OFFSET (DRAM1_BASE + 0x8000000) /* DRAM + 128MB */ + +/* Special value used to verify platform parameters from BL2 to BL3-1 */ +#define FVP_BL31_PLAT_PARAM_VAL 0x0f1e2d3c4b5a6978ULL + +/* + * V2M sysled bit definitions. The values written to this + * register are defined in arch.h & runtime_svc.h. Only + * used by the primary cpu to diagnose any cold boot issues. + * + * SYS_LED[0] - Security state (S=0/NS=1) + * SYS_LED[2:1] - Exception Level (EL3-EL0) + * SYS_LED[7:3] - Exception Class (Sync/Async & origin) + * + */ +#define SYS_LED_SS_SHIFT 0x0 +#define SYS_LED_EL_SHIFT 0x1 +#define SYS_LED_EC_SHIFT 0x3 + +#define SYS_LED_SS_MASK 0x1 +#define SYS_LED_EL_MASK 0x3 +#define SYS_LED_EC_MASK 0x1f + +/* V2M sysid register bits */ +#define SYS_ID_REV_SHIFT 27 +#define SYS_ID_HBI_SHIFT 16 +#define SYS_ID_BLD_SHIFT 12 +#define SYS_ID_ARCH_SHIFT 8 +#define SYS_ID_FPGA_SHIFT 0 + +#define SYS_ID_REV_MASK 0xf +#define SYS_ID_HBI_MASK 0xfff +#define SYS_ID_BLD_MASK 0xf +#define SYS_ID_ARCH_MASK 0xf +#define SYS_ID_FPGA_MASK 0xff + +#define SYS_ID_BLD_LENGTH 4 + +#define REV_FVP 0x0 +#define HBI_FVP_BASE 0x020 +#define HBI_FOUNDATION 0x010 + +#define BLD_GIC_VE_MMAP 0x0 +#define BLD_GIC_A53A57_MMAP 0x1 + +#define ARCH_MODEL 0x1 + +/* FVP Power controller base address*/ +#define PWRC_BASE 0x1c100000 + + +/******************************************************************************* + * CCI-400 related constants + ******************************************************************************/ +#define CCI400_BASE 0x2c090000 +#define CCI400_SL_IFACE_CLUSTER0 3 +#define CCI400_SL_IFACE_CLUSTER1 4 +#define CCI400_SL_IFACE_INDEX(mpidr) (mpidr & MPIDR_CLUSTER_MASK ? \ + CCI400_SL_IFACE_CLUSTER1 : \ + CCI400_SL_IFACE_CLUSTER0) + +/******************************************************************************* + * GIC-400 & interrupt handling related constants + ******************************************************************************/ +/* VE compatible GIC memory map */ +#define VE_GICD_BASE 0x2c001000 +#define VE_GICC_BASE 0x2c002000 +#define VE_GICH_BASE 0x2c004000 +#define VE_GICV_BASE 0x2c006000 + +/* Base FVP compatible GIC memory map */ +#define BASE_GICD_BASE 0x2f000000 +#define BASE_GICR_BASE 0x2f100000 +#define BASE_GICC_BASE 0x2c000000 +#define BASE_GICH_BASE 0x2c010000 +#define BASE_GICV_BASE 0x2c02f000 + +#define IRQ_TZ_WDOG 56 +#define IRQ_SEC_PHY_TIMER 29 +#define IRQ_SEC_SGI_0 8 +#define IRQ_SEC_SGI_1 9 +#define IRQ_SEC_SGI_2 10 +#define IRQ_SEC_SGI_3 11 +#define IRQ_SEC_SGI_4 12 +#define IRQ_SEC_SGI_5 13 +#define IRQ_SEC_SGI_6 14 +#define IRQ_SEC_SGI_7 15 +#define IRQ_SEC_SGI_8 16 + +/******************************************************************************* + * PL011 related constants + ******************************************************************************/ +#define PL011_UART0_BASE 0x1c090000 +#define PL011_UART1_BASE 0x1c0a0000 +#define PL011_UART2_BASE 0x1c0b0000 +#define PL011_UART3_BASE 0x1c0c0000 + +/******************************************************************************* + * TrustZone address space controller related constants + ******************************************************************************/ +#define TZC400_BASE 0x2a4a0000 + +/* + * The NSAIDs for this platform as used to program the TZC400. + */ + +/* The FVP has 4 bits of NSAIDs. Used with TZC FAIL_ID (ACE Lite ID width) */ +#define FVP_AID_WIDTH 4 + +/* NSAIDs used by devices in TZC filter 0 on FVP */ +#define FVP_NSAID_DEFAULT 0 +#define FVP_NSAID_PCI 1 +#define FVP_NSAID_VIRTIO 8 /* from FVP v5.6 onwards */ +#define FVP_NSAID_AP 9 /* Application Processors */ +#define FVP_NSAID_VIRTIO_OLD 15 /* until FVP v5.5 */ + +/* NSAIDs used by devices in TZC filter 2 on FVP */ +#define FVP_NSAID_HDLCD0 2 +#define FVP_NSAID_CLCD 7 + + +#endif /* __FVP_DEF_H__ */ |