blob: 0253d2fa6f5bf5572a48f4daaa702cb645c706e8 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
|
// SPDX-License-Identifier: GPL-2.0+ OR X11
/*
* Copyright 2019 Collabora Ltd
* Copyright 2019 General Electric Company
*/
/ {
bootcount {
compatible = "u-boot,bootcount-i2c-eeprom";
i2c-eeprom = <&bootcount>;
};
wdt-reboot {
compatible = "wdt-reboot";
wdt = <&wdog1>;
};
panel-lvds0 {
compatible = "simple-panel";
};
};
&eeprom {
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
vpd@0 {
reg = <0 800>;
};
bootcount: bootcount {
reg = <1022 2>;
};
};
};
/*
* This is not done in imx6q-ba16.dtsi, since that file is shared
* with the kernel and the kernel should not reset the PHY, since
* it lacks support for configuring the reserved registeres to
* avoid a board specific voltage peak issue.
*/
&fec {
phy-reset-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
phy-reset-duration = <1>;
phy-reset-post-delay = <0>;
};
/*
* PCIe reset is not done in the file shared with the kernel, since
* this GPIO also resets other peripherals (i.e. not just PCIe).
* These peripherals are being initialized by U-Boot and should not
* be reset by the kernel, so it may not reset PCIe via this GPIO.
*/
&pcie {
reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>;
};
|