1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
|
// SPDX-License-Identifier: GPL-2.0+
/*
* Mem setup common file for different types of DDR present on Exynos boards.
*
* Copyright (C) 2012 Samsung Electronics
*/
#include <common.h>
#include <asm/arch/spl.h>
#include "clock_init.h"
#include "common_setup.h"
#include "exynos5_setup.h"
#define ZQ_INIT_TIMEOUT 10000
int dmc_config_zq(struct mem_timings *mem, uint32_t *phy0_con16,
uint32_t *phy1_con16, uint32_t *phy0_con17,
uint32_t *phy1_con17)
{
unsigned long val = 0;
int i;
/*
* ZQ Calibration:
* Select Driver Strength,
* long calibration for manual calibration
*/
val = PHY_CON16_RESET_VAL;
val |= mem->zq_mode_dds << PHY_CON16_ZQ_MODE_DDS_SHIFT;
val |= mem->zq_mode_term << PHY_CON16_ZQ_MODE_TERM_SHIFT;
val |= ZQ_CLK_DIV_EN;
writel(val, phy0_con16);
writel(val, phy1_con16);
/* Disable termination */
if (mem->zq_mode_noterm)
val |= PHY_CON16_ZQ_MODE_NOTERM_MASK;
writel(val, phy0_con16);
writel(val, phy1_con16);
/* ZQ_MANUAL_START: Enable */
val |= ZQ_MANUAL_STR;
writel(val, phy0_con16);
writel(val, phy1_con16);
/* ZQ_MANUAL_START: Disable */
val &= ~ZQ_MANUAL_STR;
/*
* Since we are manaully calibrating the ZQ values,
* we are looping for the ZQ_init to complete.
*/
i = ZQ_INIT_TIMEOUT;
while ((readl(phy0_con17) & ZQ_DONE) != ZQ_DONE && i > 0) {
sdelay(100);
i--;
}
if (!i)
return -1;
writel(val, phy0_con16);
i = ZQ_INIT_TIMEOUT;
while ((readl(phy1_con17) & ZQ_DONE) != ZQ_DONE && i > 0) {
sdelay(100);
i--;
}
if (!i)
return -1;
writel(val, phy1_con16);
return 0;
}
void update_reset_dll(uint32_t *phycontrol0, enum ddr_mode mode)
{
unsigned long val;
if (mode == DDR_MODE_DDR3) {
val = MEM_TERM_EN | PHY_TERM_EN | DMC_CTRL_SHGATE;
writel(val, phycontrol0);
}
/* Update DLL Information: Force DLL Resyncronization */
val = readl(phycontrol0);
val |= FP_RSYNC;
writel(val, phycontrol0);
/* Reset Force DLL Resyncronization */
val = readl(phycontrol0);
val &= ~FP_RSYNC;
writel(val, phycontrol0);
}
void dmc_config_mrs(struct mem_timings *mem, uint32_t *directcmd)
{
int channel, chip;
for (channel = 0; channel < mem->dmc_channels; channel++) {
unsigned long mask;
mask = channel << DIRECT_CMD_CHANNEL_SHIFT;
for (chip = 0; chip < mem->chips_to_configure; chip++) {
int i;
mask |= chip << DIRECT_CMD_CHIP_SHIFT;
/* Sending NOP command */
writel(DIRECT_CMD_NOP | mask, directcmd);
/*
* TODO(alim.akhtar@samsung.com): Do we need these
* delays? This one and the next were not there for
* DDR3.
*/
sdelay(0x10000);
/* Sending EMRS/MRS commands */
for (i = 0; i < MEM_TIMINGS_MSR_COUNT; i++) {
writel(mem->direct_cmd_msr[i] | mask,
directcmd);
sdelay(0x10000);
}
if (mem->send_zq_init) {
/* Sending ZQINIT command */
writel(DIRECT_CMD_ZQINIT | mask,
directcmd);
sdelay(10000);
}
}
}
}
void dmc_config_prech(struct mem_timings *mem, uint32_t *directcmd)
{
int channel, chip;
for (channel = 0; channel < mem->dmc_channels; channel++) {
unsigned long mask;
mask = channel << DIRECT_CMD_CHANNEL_SHIFT;
for (chip = 0; chip < mem->chips_per_channel; chip++) {
mask |= chip << DIRECT_CMD_CHIP_SHIFT;
/* PALL (all banks precharge) CMD */
writel(DIRECT_CMD_PALL | mask, directcmd);
sdelay(0x10000);
}
}
}
void mem_ctrl_init(int reset)
{
struct spl_machine_param *param = spl_get_machine_params();
struct mem_timings *mem;
int ret;
mem = clock_get_mem_timings();
/* If there are any other memory variant, add their init call below */
if (param->mem_type == DDR_MODE_DDR3) {
ret = ddr3_mem_ctrl_init(mem, reset);
if (ret) {
/* will hang if failed to init memory control */
while (1)
;
}
} else {
/* will hang if unknow memory type */
while (1)
;
}
}
|