1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
|
// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2007
* Sascha Hauer, Pengutronix
*
* (C) Copyright 2009 Freescale Semiconductor, Inc.
*/
#include <common.h>
#include <cpu_func.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/clock.h>
#include <asm/arch/sys_proto.h>
#include <asm/cache.h>
#include <linux/errno.h>
#include <asm/io.h>
#include <asm/mach-imx/boot_mode.h>
#if !(defined(CONFIG_MX51) || defined(CONFIG_MX53))
#error "CPU_TYPE not defined"
#endif
u32 get_cpu_rev(void)
{
#ifdef CONFIG_MX51
int system_rev = 0x51000;
#else
int system_rev = 0x53000;
#endif
int reg = __raw_readl(ROM_SI_REV);
#if defined(CONFIG_MX51)
switch (reg) {
case 0x02:
system_rev |= CHIP_REV_1_1;
break;
case 0x10:
if ((__raw_readl(GPIO1_BASE_ADDR + 0x0) & (0x1 << 22)) == 0)
system_rev |= CHIP_REV_2_5;
else
system_rev |= CHIP_REV_2_0;
break;
case 0x20:
system_rev |= CHIP_REV_3_0;
break;
default:
system_rev |= CHIP_REV_1_0;
break;
}
#else
if (reg < 0x20)
system_rev |= CHIP_REV_1_0;
else
system_rev |= reg;
#endif
return system_rev;
}
#ifdef CONFIG_REVISION_TAG
u32 __weak get_board_rev(void)
{
return get_cpu_rev();
}
#endif
#if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF)
void enable_caches(void)
{
/* Enable D-cache. I-cache is already enabled in start.S */
dcache_enable();
}
#endif
#if defined(CONFIG_FEC_MXC)
void imx_get_mac_from_fuse(int dev_id, unsigned char *mac)
{
int i;
struct iim_regs *iim = (struct iim_regs *)IMX_IIM_BASE;
struct fuse_bank *bank = &iim->bank[1];
struct fuse_bank1_regs *fuse =
(struct fuse_bank1_regs *)bank->fuse_regs;
for (i = 0; i < 6; i++)
mac[i] = readl(&fuse->mac_addr[i]) & 0xff;
}
#endif
#ifdef CONFIG_MX53
#define IMX53_SRTC_LPGR_PERSIST_SECONDARY_BOOT BIT(30)
void boot_mode_apply(unsigned cfg_val)
{
void *lpgr = &((struct srtc_regs *)SRTC_BASE_ADDR)->lpgr;
if (cfg_val == MAKE_CFGVAL_PRIMARY_BOOT)
clrbits_le32(lpgr, IMX53_SRTC_LPGR_PERSIST_SECONDARY_BOOT);
else if (cfg_val == MAKE_CFGVAL_SECONDARY_BOOT)
setbits_le32(lpgr, IMX53_SRTC_LPGR_PERSIST_SECONDARY_BOOT);
else
writel(cfg_val, lpgr);
}
int boot_mode_getprisec(void)
{
void *lpgr = &((struct srtc_regs *)SRTC_BASE_ADDR)->lpgr;
return !!(readl(lpgr) & IMX53_SRTC_LPGR_PERSIST_SECONDARY_BOOT);
}
/*
* cfg_val will be used for
* Boot_cfg3[7:0]:Boot_cfg2[7:0]:Boot_cfg1[7:0]
*
* If bit 28 of LPGR is set upon watchdog reset,
* bits[25:0] of LPGR will move to SBMR.
*/
const struct boot_mode soc_boot_modes[] = {
{"normal", MAKE_CFGVAL(0x00, 0x00, 0x00, 0x00)},
/* usb or serial download */
{"usb", MAKE_CFGVAL(0x00, 0x00, 0x00, 0x13)},
{"sata", MAKE_CFGVAL(0x28, 0x00, 0x00, 0x12)},
{"escpi1:0", MAKE_CFGVAL(0x38, 0x20, 0x00, 0x12)},
{"escpi1:1", MAKE_CFGVAL(0x38, 0x20, 0x04, 0x12)},
{"escpi1:2", MAKE_CFGVAL(0x38, 0x20, 0x08, 0x12)},
{"escpi1:3", MAKE_CFGVAL(0x38, 0x20, 0x0c, 0x12)},
/* 4 bit bus width */
{"esdhc1", MAKE_CFGVAL(0x40, 0x20, 0x00, 0x12)},
{"esdhc2", MAKE_CFGVAL(0x40, 0x20, 0x08, 0x12)},
{"esdhc3", MAKE_CFGVAL(0x40, 0x20, 0x10, 0x12)},
{"esdhc4", MAKE_CFGVAL(0x40, 0x20, 0x18, 0x12)},
{"primary", MAKE_CFGVAL_PRIMARY_BOOT},
{"secondary", MAKE_CFGVAL_SECONDARY_BOOT},
{NULL, 0},
};
#endif
|