1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
|
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2019 Rockchip Electronics Co., Ltd
* Copyright (c) 2022 Edgeble AI Technologies Pvt. Ltd.
*/
#include <common.h>
#include <asm/io.h>
#include <asm/arch-rockchip/bootrom.h>
#include <asm/arch-rockchip/hardware.h>
#include <asm/arch-rockchip/grf_rv1126.h>
#define FIREWALL_APB_BASE 0xffa60000
#define FW_DDR_CON_REG 0x80
#define GRF_BASE 0xFE000000
const char * const boot_devices[BROM_LAST_BOOTSOURCE + 1] = {
[BROM_BOOTSOURCE_EMMC] = "/mmc@ffc50000",
[BROM_BOOTSOURCE_SD] = "/mmc@ffc60000",
};
/* GRF_GPIO3A_IOMUX_L */
enum {
GPIO3A3_SHIFT = 12,
GPIO3A3_MASK = GENMASK(14, 12),
GPIO3A3_GPIO = 0,
GPIO3A3_UART2_RX_M1,
GPIO3A3_A7_JTAG_TMS_M1,
GPIO3A2_SHIFT = 8,
GPIO3A2_MASK = GENMASK(10, 8),
GPIO3A2_GPIO = 0,
GPIO3A2_UART2_TX_M1,
GPIO3A2_A7_JTAG_TCK_M1,
};
/* GRF_IOFUNC_CON2 */
enum {
UART2_IO_SEL_SHIFT = 8,
UART2_IO_SEL_MASK = GENMASK(8, 8),
UART2_IO_SEL_M0 = 0,
UART2_IO_SEL_M1,
};
void board_debug_uart_init(void)
{
static struct rv1126_grf * const grf = (void *)GRF_BASE;
/* Enable early UART2 channel m1 on the rv1126 */
rk_clrsetreg(&grf->iofunc_con2, UART2_IO_SEL_MASK,
UART2_IO_SEL_M1 << UART2_IO_SEL_SHIFT);
/* Switch iomux */
rk_clrsetreg(&grf->gpio3a_iomux_l,
GPIO3A3_MASK | GPIO3A2_MASK,
GPIO3A3_UART2_RX_M1 << GPIO3A3_SHIFT |
GPIO3A2_UART2_TX_M1 << GPIO3A2_SHIFT);
}
#ifndef CONFIG_TPL_BUILD
int arch_cpu_init(void)
{
/**
* Set dram area unsecure in spl
*
* usb & mmc & sfc controllers can read data to dram
* since they are unsecure.
* (Note: only secure-world can access this register)
*/
if (IS_ENABLED(CONFIG_SPL_BUILD))
writel(0, FIREWALL_APB_BASE + FW_DDR_CON_REG);
return 0;
}
#endif
|