1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
|
// SPDX-License-Identifier: GPL-2.0+
/*
* sun9i specific clock code
*
* (C) Copyright 2015 Hans de Goede <hdegoede@redhat.com>
*
* (C) Copyright 2016 Theobroma Systems Design und Consulting GmbH
* Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
*/
#include <common.h>
#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/arch/prcm.h>
#include <asm/arch/sys_proto.h>
#ifdef CONFIG_SPL_BUILD
void clock_init_safe(void)
{
struct sunxi_ccm_reg * const ccm =
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
/* Set up PLL12 (peripheral 1) */
clock_set_pll12(1200000000);
/* Set up PLL1 (cluster 0) and PLL2 (cluster 1) */
clock_set_pll1(408000000);
clock_set_pll2(408000000);
/* Set up PLL4 (peripheral 0) */
clock_set_pll4(960000000);
/* Set up dividers for AXI0 and APB0 on cluster 0: PLL1 / 2 = 204MHz */
writel(C0_CFG_AXI0_CLK_DIV_RATIO(2) |
C0_CFG_APB0_CLK_DIV_RATIO(2), &ccm->c0_cfg);
/* AHB0: 120 MHz (PLL_PERIPH0 / 8) */
writel(AHBx_SRC_PLL_PERIPH0 | AHBx_CLK_DIV_RATIO(8),
&ccm->ahb0_cfg);
/* AHB1: 240 MHz (PLL_PERIPH0 / 4) */
writel(AHBx_SRC_PLL_PERIPH0 | AHBx_CLK_DIV_RATIO(4),
&ccm->ahb1_cfg);
/* AHB2: 120 MHz (PLL_PERIPH0 / 8) */
writel(AHBx_SRC_PLL_PERIPH0 | AHBx_CLK_DIV_RATIO(8),
&ccm->ahb2_cfg);
/* APB0: 120 MHz (PLL_PERIPH0 / 8) */
writel(APB0_SRC_PLL_PERIPH0 | APB0_CLK_DIV_RATIO(8),
&ccm->apb0_cfg);
/* GTBUS: 400MHz (PERIPH0 div 3) */
writel(GTBUS_SRC_PLL_PERIPH1 | GTBUS_CLK_DIV_RATIO(3),
&ccm->gtbus_cfg);
/* CCI400: 480MHz (PERIPH1 div 2) */
writel(CCI400_SRC_PLL_PERIPH0 | CCI400_CLK_DIV_RATIO(2),
&ccm->cci400_cfg);
/* Deassert DMA reset and open clock gating for DMA */
setbits_le32(&ccm->ahb_reset1_cfg, (1 << 24));
setbits_le32(&ccm->apb1_gate, (1 << 24));
/* set enable-bit in TSTAMP_CTRL_REG */
writel(1, 0x01720000);
}
#endif
void clock_init_uart(void)
{
struct sunxi_ccm_reg *const ccm =
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
/* open the clock for uart */
setbits_le32(&ccm->apb1_gate,
CLK_GATE_OPEN << (APB1_GATE_UART_SHIFT +
CONFIG_CONS_INDEX - 1));
/* deassert uart reset */
setbits_le32(&ccm->apb1_reset_cfg,
1 << (APB1_RESET_UART_SHIFT +
CONFIG_CONS_INDEX - 1));
}
#ifdef CONFIG_SPL_BUILD
void clock_set_pll1(unsigned int clk)
{
struct sunxi_ccm_reg * const ccm =
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
const int p = 0;
/* Switch cluster 0 to 24MHz clock while changing PLL1 */
clrsetbits_le32(&ccm->cpu_clk_source, C0_CPUX_CLK_SRC_MASK,
C0_CPUX_CLK_SRC_OSC24M);
writel(CCM_PLL1_CTRL_EN | CCM_PLL1_CTRL_P(p) |
CCM_PLL1_CLOCK_TIME_2 |
CCM_PLL1_CTRL_N(clk / 24000000),
&ccm->pll1_c0_cfg);
/*
* Don't bother with the stable-time registers, as it doesn't
* wait until the PLL is stable. Note, that even Allwinner
* just uses a delay loop (or rather the AVS timer) for this
* instead of the PLL_STABLE_STATUS register.
*/
sdelay(2000);
/* Switch cluster 0 back to PLL1 */
clrsetbits_le32(&ccm->cpu_clk_source, C0_CPUX_CLK_SRC_MASK,
C0_CPUX_CLK_SRC_PLL1);
}
void clock_set_pll2(unsigned int clk)
{
struct sunxi_ccm_reg * const ccm =
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
const int p = 0;
/* Switch cluster 1 to 24MHz clock while changing PLL2 */
clrsetbits_le32(&ccm->cpu_clk_source, C1_CPUX_CLK_SRC_MASK,
C1_CPUX_CLK_SRC_OSC24M);
writel(CCM_PLL2_CTRL_EN | CCM_PLL2_CTRL_P(p) |
CCM_PLL2_CLOCK_TIME_2 | CCM_PLL2_CTRL_N(clk / 24000000),
&ccm->pll2_c1_cfg);
sdelay(2000);
/* Switch cluster 1 back to PLL2 */
clrsetbits_le32(&ccm->cpu_clk_source, C1_CPUX_CLK_SRC_MASK,
C1_CPUX_CLK_SRC_PLL2);
}
void clock_set_pll6(unsigned int clk)
{
struct sunxi_ccm_reg * const ccm =
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
const int p = 0;
writel(CCM_PLL6_CTRL_EN | CCM_PLL6_CFG_UPDATE | CCM_PLL6_CTRL_P(p)
| CCM_PLL6_CTRL_N(clk / 24000000),
&ccm->pll6_ddr_cfg);
do { } while (!(readl(&ccm->pll_stable_status) & PLL_DDR_STATUS));
sdelay(2000);
}
void clock_set_pll12(unsigned int clk)
{
struct sunxi_ccm_reg * const ccm =
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
if (readl(&ccm->pll12_periph1_cfg) & CCM_PLL12_CTRL_EN)
return;
writel(CCM_PLL12_CTRL_EN | CCM_PLL12_CTRL_N(clk / 24000000),
&ccm->pll12_periph1_cfg);
sdelay(2000);
}
void clock_set_pll4(unsigned int clk)
{
struct sunxi_ccm_reg * const ccm =
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
writel(CCM_PLL4_CTRL_EN | CCM_PLL4_CTRL_N(clk / 24000000),
&ccm->pll4_periph0_cfg);
sdelay(2000);
}
#endif
int clock_twi_onoff(int port, int state)
{
struct sunxi_ccm_reg *const ccm =
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
if (port > 4)
return -1;
/* set the apb reset and clock gate for twi */
if (state) {
setbits_le32(&ccm->apb1_gate,
CLK_GATE_OPEN << (APB1_GATE_TWI_SHIFT + port));
setbits_le32(&ccm->apb1_reset_cfg,
1 << (APB1_RESET_TWI_SHIFT + port));
} else {
clrbits_le32(&ccm->apb1_reset_cfg,
1 << (APB1_RESET_TWI_SHIFT + port));
clrbits_le32(&ccm->apb1_gate,
CLK_GATE_OPEN << (APB1_GATE_TWI_SHIFT + port));
}
return 0;
}
unsigned int clock_get_pll4_periph0(void)
{
struct sunxi_ccm_reg *const ccm =
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
uint32_t rval = readl(&ccm->pll4_periph0_cfg);
int n = ((rval & CCM_PLL4_CTRL_N_MASK) >> CCM_PLL4_CTRL_N_SHIFT);
int p = ((rval & CCM_PLL4_CTRL_P_MASK) >> CCM_PLL4_CTRL_P_SHIFT);
int m = ((rval & CCM_PLL4_CTRL_M_MASK) >> CCM_PLL4_CTRL_M_SHIFT) + 1;
const int k = 1;
return ((24000000 * n * k) >> p) / m;
}
|