1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
|
/*
* sun50i H6 DDR3-1333 timings, as programmed by Allwinner's boot0
* for some TV boxes with the H6 and DDR3 memory.
*
* The chips are probably able to be driven by a faster clock, but boot0
* uses a more conservative timing (as usual).
*
* (C) Copyright 2018,2019 Arm Ltd.
* based on previous work by:
* (C) Copyright 2017 Icenowy Zheng <icenowy@aosc.io>
*
* References used:
* - JEDEC DDR3 SDRAM standard: JESD79-3F.pdf
* - Samsung K4B2G0446D datasheet
* - ZynqMP UG1087 register DDRC/PHY documentation
*
* Many thanks to Jernej Skrabec for contributing some fixes!
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/arch/dram.h>
#include <asm/arch/cpu.h>
/*
* Only the first four are used for DDR3(?)
* MR0: BL8, seq. read burst, no test, fast exit (DLL on), no DLL reset,
* CAS latency (CL): 11, write recovery (WR): 12
* MR1: DLL enabled, output strength RZQ/6, Rtt_norm RZQ/2,
* write levelling disabled, TDQS disabled, output buffer enabled
* MR2: manual full array self refresh, dynamic ODT off,
* CAS write latency (CWL): 8
*/
static u32 mr_ddr3[7] = {
0x00001c70, 0x00000040, 0x00000018, 0x00000000,
0x00000000, 0x00000400, 0x00000848,
};
/* TODO: flexible timing */
void mctl_set_timing_params(struct dram_para *para)
{
struct sunxi_mctl_ctl_reg * const mctl_ctl =
(struct sunxi_mctl_ctl_reg *)SUNXI_DRAM_CTL0_BASE;
struct sunxi_mctl_phy_reg * const mctl_phy =
(struct sunxi_mctl_phy_reg *)SUNXI_DRAM_PHY0_BASE;
int i;
u8 tccd = 2; /* JEDEC: 4nCK */
u8 tfaw = ns_to_t(50); /* JEDEC: 30 ns w/ 1K pages */
u8 trrd = max(ns_to_t(6), 4); /* JEDEC: max(6 ns, 4nCK) */
u8 trcd = ns_to_t(15); /* JEDEC: 13.5 ns */
u8 trc = ns_to_t(53); /* JEDEC: 49.5 ns */
u8 txp = max(ns_to_t(6), 3); /* JEDEC: max(6 ns, 3nCK) */
u8 twtr = max(ns_to_t(8), 2); /* JEDEC: max(7.5 ns, 4nCK) */
u8 trtp = max(ns_to_t(8), 2); /* JEDEC: max(7.5 ns, 4nCK) */
u8 twr = ns_to_t(15); /* JEDEC: 15 ns */
u8 trp = ns_to_t(15); /* JEDEC: >= 13.75 ns */
u8 tras = ns_to_t(38); /* JEDEC >= 36 ns, <= 9*trefi */
u8 twtr_sa = 2; /* ? */
u8 tcksrea = 4; /* ? */
u16 trefi = ns_to_t(7800) / 32; /* JEDEC: 7.8us@Tcase <= 85C */
u16 trfc = ns_to_t(350); /* JEDEC: 160 ns for 2Gb */
u16 txsr = 4; /* ? */
u8 tmrw = 0; /* ? */
u8 tmrd = 4; /* JEDEC: 4nCK */
u8 tmod = max(ns_to_t(15), 12); /* JEDEC: max(15 ns, 12nCK) */
u8 tcke = max(ns_to_t(6), 3); /* JEDEC: max(5.625 ns, 3nCK) */
u8 tcksrx = max(ns_to_t(10), 5); /* JEDEC: max(10 ns, 5nCK) */
u8 tcksre = max(ns_to_t(10), 5); /* JEDEC: max(10 ns, 5nCK) */
u8 tckesr = tcke + 1; /* JEDEC: tCKE(min) + 1nCK */
u8 trasmax = 24; /* JEDEC: tREFI * 9 */
u8 txs = ns_to_t(360) / 32; /* JEDEC: max(5nCK,tRFC+10ns) */
u8 txsdll = 4; /* JEDEC: 512 nCK */
u8 txsabort = 4; /* ? */
u8 txsfast = 4; /* ? */
u8 tcl = 6; /* JEDEC: CL / 2 => 6 */
u8 tcwl = 4; /* JEDEC: 8 */
u8 t_rdata_en = 7; /* ? */
u32 tdinit0 = (500 * CONFIG_DRAM_CLK) + 1; /* 500us */
u32 tdinit1 = (360 * CONFIG_DRAM_CLK) / 1000 + 1;
u32 tdinit2 = (200 * CONFIG_DRAM_CLK) + 1;
u32 tdinit3 = (1 * CONFIG_DRAM_CLK) + 1; /* 1us */
u8 twtp = tcwl + 2 + twr; /* (WL + BL / 2 + tWR) / 2 */
u8 twr2rd = tcwl + 2 + twtr; /* (WL + BL / 2 + tWTR) / 2 */
u8 trd2wr = 5; /* (RL + BL / 2 + 2 - WL) / 2 */
if (tcl + 1 >= trtp + trp)
trtp = tcl + 2 - trp;
/* set mode registers */
for (i = 0; i < ARRAY_SIZE(mr_ddr3); i++)
writel(mr_ddr3[i], &mctl_phy->mr[i]);
/* set DRAM timing */
writel((twtp << 24) | (tfaw << 16) | (trasmax << 8) | tras,
&mctl_ctl->dramtmg[0]);
writel((txp << 16) | (trtp << 8) | trc, &mctl_ctl->dramtmg[1]);
writel((tcwl << 24) | (tcl << 16) | (trd2wr << 8) | twr2rd,
&mctl_ctl->dramtmg[2]);
writel((tmrw << 20) | (tmrd << 12) | tmod, &mctl_ctl->dramtmg[3]);
writel((trcd << 24) | (tccd << 16) | (trrd << 8) | trp,
&mctl_ctl->dramtmg[4]);
writel((tcksrx << 24) | (tcksre << 16) | (tckesr << 8) | tcke,
&mctl_ctl->dramtmg[5]);
/* Value suggested by ZynqMP manual and used by libdram */
writel((txp + 2) | 0x02020000, &mctl_ctl->dramtmg[6]);
writel((txsfast << 24) | (txsabort << 16) | (txsdll << 8) | txs,
&mctl_ctl->dramtmg[8]);
writel(txsr, &mctl_ctl->dramtmg[14]);
clrsetbits_le32(&mctl_ctl->init[0], (3 << 30), (1 << 30));
writel(0, &mctl_ctl->dfimisc);
clrsetbits_le32(&mctl_ctl->rankctl, 0xff0, 0x660);
/*
* Set timing registers of the PHY.
* Note: the PHY is clocked 2x from the DRAM frequency.
*/
writel((trrd << 25) | (tras << 17) | (trp << 9) | (trtp << 1),
&mctl_phy->dtpr[0]);
writel((tfaw << 17) | 0x28000400 | (tmrd << 1), &mctl_phy->dtpr[1]);
writel(((txs << 6) - 1) | (tcke << 17), &mctl_phy->dtpr[2]);
writel(((txsdll << 22) - (0x1 << 16)) | twtr_sa | (tcksrea << 8),
&mctl_phy->dtpr[3]);
writel((txp << 1) | (trfc << 17) | 0x800, &mctl_phy->dtpr[4]);
writel((trc << 17) | (trcd << 9) | (twtr << 1), &mctl_phy->dtpr[5]);
writel(0x0505, &mctl_phy->dtpr[6]);
/* Configure DFI timing */
writel(tcl | 0x2000200 | (t_rdata_en << 16) | 0x808000,
&mctl_ctl->dfitmg0);
writel(0x040201, &mctl_ctl->dfitmg1);
/* Configure PHY timing. Zynq uses different registers. */
writel(tdinit0 | (tdinit1 << 20), &mctl_phy->ptr[3]);
writel(tdinit2 | (tdinit3 << 18), &mctl_phy->ptr[4]);
/* set refresh timing */
writel((trefi << 16) | trfc, &mctl_ctl->rfshtmg);
}
|