1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
|
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2006 Freescale Semiconductor, Inc.
*
* Dave Liu <daveliu@freescale.com>
* based on source code of Shlomi Gridish
*/
#include <common.h>
#include <linux/errno.h>
#include <asm/io.h>
#include <asm/immap_83xx.h>
#define NUM_OF_PINS 32
/** qe_cfg_iopin configure one io pin setting
*
* @par_io: pointer to parallel I/O base
* @port: io pin port
* @pin: io pin number which get configured
* @dir: direction of io pin 2 bits valid
* 00 = pin disabled
* 01 = output
* 10 = input
* 11 = pin is I/O
* @open_drain: is pin open drain
* @assign: pin assignment registers select the function of the pin
*/
static void qe_cfg_iopin(qepio83xx_t *par_io, u8 port, u8 pin, int dir,
int open_drain, int assign)
{
u32 dbit_mask;
u32 dbit_dir;
u32 dbit_asgn;
u32 bit_mask;
u32 tmp_val;
int offset;
offset = (NUM_OF_PINS - (pin % (NUM_OF_PINS / 2) + 1) * 2);
/* Calculate pin location and 2bit mask and dir */
dbit_mask = (u32)(0x3 << offset);
dbit_dir = (u32)(dir << offset);
/* Setup the direction */
tmp_val = (pin > (NUM_OF_PINS / 2) - 1) ?
in_be32(&par_io->ioport[port].dir2) :
in_be32(&par_io->ioport[port].dir1);
if (pin > (NUM_OF_PINS / 2) - 1) {
out_be32(&par_io->ioport[port].dir2, ~dbit_mask & tmp_val);
out_be32(&par_io->ioport[port].dir2, dbit_dir | tmp_val);
} else {
out_be32(&par_io->ioport[port].dir1, ~dbit_mask & tmp_val);
out_be32(&par_io->ioport[port].dir1, dbit_dir | tmp_val);
}
/* Calculate pin location for 1bit mask */
bit_mask = (u32)(1 << (NUM_OF_PINS - (pin + 1)));
/* Setup the open drain */
tmp_val = in_be32(&par_io->ioport[port].podr);
if (open_drain)
out_be32(&par_io->ioport[port].podr, bit_mask | tmp_val);
else
out_be32(&par_io->ioport[port].podr, ~bit_mask & tmp_val);
/* Setup the assignment */
tmp_val = (pin > (NUM_OF_PINS / 2) - 1) ?
in_be32(&par_io->ioport[port].ppar2) :
in_be32(&par_io->ioport[port].ppar1);
dbit_asgn = (u32)(assign << offset);
/* Clear and set 2 bits mask */
if (pin > (NUM_OF_PINS / 2) - 1) {
out_be32(&par_io->ioport[port].ppar2, ~dbit_mask & tmp_val);
out_be32(&par_io->ioport[port].ppar2, dbit_asgn | tmp_val);
} else {
out_be32(&par_io->ioport[port].ppar1, ~dbit_mask & tmp_val);
out_be32(&par_io->ioport[port].ppar1, dbit_asgn | tmp_val);
}
}
#if !defined(CONFIG_PINCTRL)
/** qe_config_iopin configure one io pin setting
*
* @port: io pin port
* @pin: io pin number which get configured
* @dir: direction of io pin 2 bits valid
* 00 = pin disabled
* 01 = output
* 10 = input
* 11 = pin is I/O
* @open_drain: is pin open drain
* @assign: pin assignment registers select the function of the pin
*/
void qe_config_iopin(u8 port, u8 pin, int dir, int open_drain, int assign)
{
immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
qepio83xx_t *par_io = (qepio83xx_t *)&im->qepio;
qe_cfg_iopin(par_io, port, pin, dir, open_drain, assign);
}
#endif
|