~funderscore blog cgit wiki get in touch
aboutsummaryrefslogtreecommitdiff
blob: 2fdd95a730c821ece8a129cd087aa1465a8e0907 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
// SPDX-License-Identifier: GPL-2.0+
/*
 * Copyright 2022 Marek Vasut <marex@denx.de>
 */

#include <common.h>
#include <hang.h>
#include <image.h>
#include <init.h>
#include <spl.h>

#include <asm-generic/gpio.h>
#include <asm/arch/clock.h>
#include <asm/arch/ddr.h>
#include <asm/arch/imx8mp_pins.h>
#include <asm/arch/sys_proto.h>
#include <asm/io.h>
#include <asm/mach-imx/boot_mode.h>

#include <dm/uclass.h>
#include <dm/device.h>
#include <dm/uclass-internal.h>
#include <dm/device-internal.h>

#include <power/pmic.h>
#include <power/pca9450.h>

#include "lpddr4_timing.h"

#include "../common/common.h"

DECLARE_GLOBAL_DATA_PTR;

int data_modul_imx_edm_sbc_board_power_init(void)
{
	struct udevice *dev;
	int ret;

	ret = pmic_get("pmic@25", &dev);
	if (ret == -ENODEV) {
		puts("Failed to get PMIC\n");
		return 0;
	}
	if (ret != 0)
		return ret;

	/* BUCKxOUT_DVS0/1 control BUCK123 output. */
	pmic_reg_write(dev, PCA9450_BUCK123_DVS, 0x29);

	/* Increase VDD_SOC to typical value 0.95V before first DRAM access. */
	if (IS_ENABLED(CONFIG_IMX8M_VDD_SOC_850MV))
		/* Set DVS0 to 0.85V for special case. */
		pmic_reg_write(dev, PCA9450_BUCK1OUT_DVS0, 0x14);
	else
		pmic_reg_write(dev, PCA9450_BUCK1OUT_DVS0, 0x1c);

	/* Set DVS1 to 0.85v for suspend. */
	pmic_reg_write(dev, PCA9450_BUCK1OUT_DVS1, 0x14);

	/*
	 * Enable DVS control through PMIC_STBY_REQ and
	 * set B1_ENMODE=1 (ON by PMIC_ON_REQ=H).
	 */
	pmic_reg_write(dev, PCA9450_BUCK1CTRL, 0x59);

	/* Kernel uses OD/OD frequency for SoC. */

	/* To avoid timing risk from SoC to ARM, increase VDD_ARM to OD voltage 0.95V */
	pmic_reg_write(dev, PCA9450_BUCK2OUT_DVS0, 0x1c);

	/* Set LDO4 and CONFIG2 to enable the I2C level translator. */
	pmic_reg_write(dev, PCA9450_LDO4CTRL, 0x59);
	pmic_reg_write(dev, PCA9450_CONFIG2, 0x1);

	return 0;
}

int spl_board_boot_device(enum boot_device boot_dev_spl)
{
	if (boot_dev_spl == SPI_NOR_BOOT)	/* SPI NOR */
		return BOOT_DEVICE_SPI;

	if (boot_dev_spl == MMC3_BOOT)		/* eMMC */
		return BOOT_DEVICE_MMC2;

	return BOOT_DEVICE_MMC1;		/* SD */
}

void board_boot_order(u32 *spl_boot_list)
{
	int boot_device = spl_boot_device();

	spl_boot_list[0] = boot_device;		/* 1:SD 2:eMMC 8:SPI NOR */

	if (boot_device == BOOT_DEVICE_SPI) {		/* SPI, eMMC, SD */
		spl_boot_list[1] = BOOT_DEVICE_MMC2;	/* eMMC */
		spl_boot_list[2] = BOOT_DEVICE_MMC1;	/* SD */
	} else if (boot_device == BOOT_DEVICE_MMC1) {	/* SD, eMMC, SPI */
		spl_boot_list[1] = BOOT_DEVICE_MMC2;	/* eMMC */
		spl_boot_list[2] = BOOT_DEVICE_SPI;	/* SPI */
	} else {					/* eMMC, SPI, SD */
		spl_boot_list[1] = BOOT_DEVICE_SPI;	/* SPI */
		spl_boot_list[2] = BOOT_DEVICE_MMC1;	/* SD */
	}

	spl_boot_list[3] = BOOT_DEVICE_UART;	/* YModem */
	spl_boot_list[4] = BOOT_DEVICE_NONE;
}

unsigned long spl_mmc_get_uboot_raw_sector(struct mmc *mmc, unsigned long sect)
{
	const u32 boot_dev = spl_boot_device();
	int part;

	if (boot_dev == BOOT_DEVICE_MMC2) {	/* eMMC */
		part = spl_mmc_emmc_boot_partition(mmc);
		if (part == 1 || part == 2)	/* eMMC BOOT1/BOOT2 HW partitions */
			return sect - 0x40;
	}

	return sect;
}

static struct dram_timing_info *dram_timing_info[8] = {
	&dmo_imx8mp_sbc_dram_timing_32_32,	/* 32 Gbit x32 */
	NULL,					/* 32 Gbit x16 */
	NULL,					/* 16 Gbit x32 */
	NULL,					/* 16 Gbit x16 */
	NULL,					/* 8 Gbit x32 */
	NULL,					/* 8 Gbit x16 */
	NULL,					/* INVALID */
	NULL,					/* INVALID */
};

void board_init_f(ulong dummy)
{
	dmo_board_init_f(MX8MP_PAD_GPIO1_IO02__WDOG1_WDOG_B, dram_timing_info);
}