1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
|
// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2012
* Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc
*/
/* Parade Technologies Inc. DP501 DisplayPort DVI/HDMI Transmitter */
#ifdef CONFIG_GDSYS_LEGACY_DRIVERS
#include <common.h>
#include <asm/io.h>
#include <errno.h>
#include <i2c.h>
#define DP501_I2C_ADDR 0x08
#ifdef CONFIG_SYS_DP501_I2C
int dp501_i2c[] = CONFIG_SYS_DP501_I2C;
#endif
#ifdef CONFIG_SYS_DP501_BASE
int dp501_base[] = CONFIG_SYS_DP501_BASE;
#endif
static void dp501_setbits(u8 addr, u8 reg, u8 mask)
{
u8 val;
val = i2c_reg_read(addr, reg);
setbits_8(&val, mask);
i2c_reg_write(addr, reg, val);
}
static void dp501_clrbits(u8 addr, u8 reg, u8 mask)
{
u8 val;
val = i2c_reg_read(addr, reg);
clrbits_8(&val, mask);
i2c_reg_write(addr, reg, val);
}
static int dp501_detect_cable_adapter(u8 addr)
{
u8 val = i2c_reg_read(addr, 0x00);
return !(val & 0x04);
}
static void dp501_link_training(u8 addr)
{
u8 val;
u8 link_bw;
u8 max_lane_cnt;
u8 lane_cnt;
val = i2c_reg_read(addr, 0x51);
if (val >= 0x0a)
link_bw = 0x0a;
else
link_bw = 0x06;
if (link_bw != val)
printf("DP sink supports %d Mbps link rate, set to %d Mbps\n",
val * 270, link_bw * 270);
i2c_reg_write(addr, 0x5d, link_bw); /* set link_bw */
val = i2c_reg_read(addr, 0x52);
max_lane_cnt = val & 0x1f;
if (max_lane_cnt >= 4)
lane_cnt = 4;
else
lane_cnt = max_lane_cnt;
if (lane_cnt != max_lane_cnt)
printf("DP sink supports %d lanes, set to %d lanes\n",
max_lane_cnt, lane_cnt);
i2c_reg_write(addr, 0x5e, lane_cnt | (val & 0x80)); /* set lane_cnt */
val = i2c_reg_read(addr, 0x53);
i2c_reg_write(addr, 0x5c, val); /* set downspread_ctl */
i2c_reg_write(addr, 0x5f, 0x0d); /* start training */
}
void dp501_powerup(u8 addr)
{
dp501_clrbits(addr, 0x0a, 0x30); /* power on encoder */
dp501_setbits(addr, 0x0a, 0x0e); /* block HDCP and MCCS on I2C bride*/
i2c_reg_write(addr, 0x27, 0x30); /* Hardware auto detect DVO timing */
dp501_setbits(addr, 0x72, 0x80); /* DPCD read enable */
dp501_setbits(addr, 0x30, 0x20); /* RS polynomial select */
i2c_reg_write(addr, 0x71, 0x20); /* Enable Aux burst write */
dp501_setbits(addr, 0x78, 0x30); /* Disable HPD2 IRQ */
dp501_clrbits(addr, 0x2f, 0x40); /* Link FIFO reset selection */
dp501_clrbits(addr, 0x60, 0x20); /* Enable scrambling */
#ifdef CONFIG_SYS_DP501_VCAPCTRL0
i2c_reg_write(addr, 0x24, CONFIG_SYS_DP501_VCAPCTRL0);
#else
i2c_reg_write(addr, 0x24, 0xc0); /* SDR mode 0, ext. H/VSYNC */
#endif
#ifdef CONFIG_SYS_DP501_DIFFERENTIAL
i2c_reg_write(addr + 2, 0x24, 0x10); /* clock input differential */
i2c_reg_write(addr + 2, 0x25, 0x04);
i2c_reg_write(addr + 2, 0x26, 0x10);
#else
i2c_reg_write(addr + 2, 0x24, 0x02); /* clock input single ended */
#endif
i2c_reg_write(addr + 2, 0x1a, 0x04); /* SPDIF input method TTL */
i2c_reg_write(addr + 2, 0x00, 0x18); /* driving strength */
i2c_reg_write(addr + 2, 0x03, 0x06); /* driving strength */
i2c_reg_write(addr, 0x2c, 0x00); /* configure N value */
i2c_reg_write(addr, 0x2d, 0x00); /* configure N value */
i2c_reg_write(addr, 0x2e, 0x0c); /* configure N value */
i2c_reg_write(addr, 0x76, 0xff); /* clear all interrupt */
dp501_setbits(addr, 0x78, 0x03); /* clear all interrupt */
i2c_reg_write(addr, 0x75, 0xf8); /* aux channel reset */
i2c_reg_write(addr, 0x75, 0x00); /* clear aux channel reset */
i2c_reg_write(addr, 0x87, 0x7f); /* set retry counter as 7
retry interval 400us */
if (dp501_detect_cable_adapter(addr)) {
printf("DVI/HDMI cable adapter detected\n");
i2c_reg_write(addr, 0x5e, 0x04); /* enable 4 channel */
dp501_clrbits(addr, 0x00, 0x08); /* DVI/HDMI HDCP operation */
} else {
printf("no DVI/HDMI cable adapter detected\n");
dp501_setbits(addr, 0x00, 0x08); /* for DP HDCP operation */
dp501_link_training(addr);
}
}
void dp501_powerdown(u8 addr)
{
dp501_setbits(addr, 0x0a, 0x30); /* power down encoder, standby mode */
}
int dp501_probe(unsigned screen, bool power)
{
#ifdef CONFIG_SYS_DP501_BASE
uint8_t dp501_addr = dp501_base[screen];
#else
uint8_t dp501_addr = DP501_I2C_ADDR;
#endif
#ifdef CONFIG_SYS_DP501_I2C
i2c_set_bus_num(dp501_i2c[screen]);
#endif
if (i2c_probe(dp501_addr))
return -1;
dp501_powerup(dp501_addr);
return 0;
}
#endif /* CONFIG_GDSYS_LEGACY_DRIVERS */
|