1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
|
// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2013-2019
* NVIDIA Corporation <www.nvidia.com>
*/
#include <common.h>
#include <env.h>
#include <fdtdec.h>
#include <i2c.h>
#include <log.h>
#include <net.h>
#include <stdlib.h>
#include <linux/bitops.h>
#include <linux/libfdt.h>
#include <asm/arch/gpio.h>
#include <asm/arch/pinmux.h>
#include <asm/arch-tegra/board.h>
#include "../p2571/max77620_init.h"
void pin_mux_mmc(void)
{
struct udevice *dev;
uchar val;
int ret;
/* Turn on MAX77620 LDO2 to 3.3V for SD card power */
debug("%s: Set LDO2 for VDDIO_SDMMC_AP power to 3.3V\n", __func__);
ret = i2c_get_chip_for_busnum(0, MAX77620_I2C_ADDR_7BIT, 1, &dev);
if (ret) {
printf("%s: Cannot find MAX77620 I2C chip\n", __func__);
return;
}
/* 0xF2 for 3.3v, enabled: bit7:6 = 11 = enable, bit5:0 = voltage */
val = 0xF2;
ret = dm_i2c_write(dev, MAX77620_CNFG1_L2_REG, &val, 1);
if (ret)
printf("i2c_write 0 0x3c 0x27 failed: %d\n", ret);
/* Disable LDO4 discharge */
ret = dm_i2c_read(dev, MAX77620_CNFG2_L4_REG, &val, 1);
if (ret) {
printf("i2c_read 0 0x3c 0x2c failed: %d\n", ret);
} else {
val &= ~BIT(1); /* ADE */
ret = dm_i2c_write(dev, MAX77620_CNFG2_L4_REG, &val, 1);
if (ret)
printf("i2c_write 0 0x3c 0x2c failed: %d\n", ret);
}
/* Set MBLPD */
ret = dm_i2c_read(dev, MAX77620_CNFGGLBL1_REG, &val, 1);
if (ret) {
printf("i2c_write 0 0x3c 0x00 failed: %d\n", ret);
} else {
val |= BIT(6); /* MBLPD */
ret = dm_i2c_write(dev, MAX77620_CNFGGLBL1_REG, &val, 1);
if (ret)
printf("i2c_write 0 0x3c 0x00 failed: %d\n", ret);
}
}
#ifdef CONFIG_PCI_TEGRA
int tegra_pcie_board_init(void)
{
struct udevice *dev;
uchar val;
int ret;
/* Turn on MAX77620 LDO1 to 1.05V for PEX power */
debug("%s: Set LDO1 for PEX power to 1.05V\n", __func__);
ret = i2c_get_chip_for_busnum(0, MAX77620_I2C_ADDR_7BIT, 1, &dev);
if (ret) {
printf("%s: Cannot find MAX77620 I2C chip\n", __func__);
return -1;
}
/* 0xCA for 1.05v, enabled: bit7:6 = 11 = enable, bit5:0 = voltage */
val = 0xCA;
ret = dm_i2c_write(dev, MAX77620_CNFG1_L1_REG, &val, 1);
if (ret)
printf("i2c_write 0 0x3c 0x25 failed: %d\n", ret);
return 0;
}
#endif /* PCI */
static const char * const nodes[] = {
"/host1x@50000000/dc@54200000",
"/host1x@50000000/dc@54240000",
"/external-memory-controller@7001b000",
};
int ft_board_setup(void *fdt, struct bd_info *bd)
{
ft_mac_address_setup(fdt);
ft_carveout_setup(fdt, nodes, ARRAY_SIZE(nodes));
return 0;
}
|