1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
|
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (c) 2020-2021 SiFive, Inc
*
* Authors:
* Pragnesh Patel <pragnesh.patel@sifive.com>
*/
#include <init.h>
#include <spl.h>
#include <misc.h>
#include <log.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <asm/gpio.h>
#include <asm/arch/gpio.h>
#include <asm/arch/spl.h>
#define UBRDG_RESET SIFIVE_GENERIC_GPIO_NR(0, 7)
#define ULPI_RESET SIFIVE_GENERIC_GPIO_NR(0, 9)
#define UHUB_RESET SIFIVE_GENERIC_GPIO_NR(0, 11)
#define GEM_PHY_RESET SIFIVE_GENERIC_GPIO_NR(0, 12)
#define MODE_SELECT_REG 0x1000
#define MODE_SELECT_SPI 0x6
#define MODE_SELECT_SD 0xb
#define MODE_SELECT_MASK GENMASK(3, 0)
static inline int spl_reset_device_by_gpio(const char *label, int pin, int low_width)
{
int ret;
ret = gpio_request(pin, label);
if (ret) {
debug("%s gpio request failed: %d\n", label, ret);
return ret;
}
ret = gpio_direction_output(pin, 1);
if (ret) {
debug("%s gpio direction set failed: %d\n", label, ret);
return ret;
}
udelay(1);
gpio_set_value(pin, 0);
udelay(low_width);
gpio_set_value(pin, 1);
return ret;
}
static inline int spl_gemgxl_init(void)
{
int ret;
/*
* GEMGXL init VSC8541 PHY reset sequence;
* leave pull-down active for 2ms
*/
udelay(2000);
ret = spl_reset_device_by_gpio("gem_phy_reset", GEM_PHY_RESET, 1);
mdelay(15);
return ret;
}
static inline int spl_usb_pcie_bridge_init(void)
{
return spl_reset_device_by_gpio("usb_pcie_bridge_reset", UBRDG_RESET, 3000);
}
static inline int spl_usb_hub_init(void)
{
return spl_reset_device_by_gpio("usb_hub_reset", UHUB_RESET, 100);
}
static inline int spl_ulpi_init(void)
{
return spl_reset_device_by_gpio("ulpi_reset", ULPI_RESET, 1);
}
int spl_board_init_f(void)
{
int ret;
ret = spl_soc_init();
if (ret) {
debug("HiFive Unmatched FU740 SPL init failed: %d\n", ret);
goto end;
}
ret = spl_gemgxl_init();
if (ret) {
debug("Gigabit ethernet PHY (VSC8541) init failed: %d\n", ret);
goto end;
}
ret = spl_usb_pcie_bridge_init();
if (ret) {
debug("USB Bridge (ASM1042A) init failed: %d\n", ret);
goto end;
}
ret = spl_usb_hub_init();
if (ret) {
debug("USB Hub (ASM1074) init failed: %d\n", ret);
goto end;
}
ret = spl_ulpi_init();
if (ret) {
debug("USB 2.0 PHY (USB3320C) init failed: %d\n", ret);
goto end;
}
end:
return ret;
}
u32 spl_boot_device(void)
{
u32 mode_select = readl((void *)MODE_SELECT_REG);
u32 boot_device = mode_select & MODE_SELECT_MASK;
switch (boot_device) {
case MODE_SELECT_SPI:
return BOOT_DEVICE_SPI;
case MODE_SELECT_SD:
return BOOT_DEVICE_MMC1;
default:
debug("Unsupported boot device 0x%x but trying MMC1\n",
boot_device);
return BOOT_DEVICE_MMC1;
}
}
#ifdef CONFIG_SPL_LOAD_FIT
int board_fit_config_name_match(const char *name)
{
/* boot using first FIT config */
return 0;
}
#endif
|