1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
|
// SPDX-License-Identifier: GPL-2.0+
/*
* (c) 2015 Paul Thacker <paul.thacker@microchip.com>
*
*/
#include <common.h>
#include <wait_bit.h>
#include <linux/kernel.h>
#include <linux/bitops.h>
#include <mach/pic32.h>
#include <mach/ddr.h>
#include "ddr2_regs.h"
#include "ddr2_timing.h"
/* init DDR2 Phy */
void ddr2_phy_init(void)
{
struct ddr2_phy_regs *ddr2_phy;
u32 pad_ctl;
ddr2_phy = ioremap(PIC32_DDR2P_BASE, sizeof(*ddr2_phy));
/* PHY_DLL_RECALIB */
writel(DELAY_START_VAL(3) | DISABLE_RECALIB(0) |
RECALIB_CNT(0x10), &ddr2_phy->dll_recalib);
/* PHY_PAD_CTRL */
pad_ctl = ODT_SEL | ODT_EN | DRIVE_SEL(0) |
ODT_PULLDOWN(2) | ODT_PULLUP(3) |
EXTRA_OEN_CLK(0) | NOEXT_DLL |
DLR_DFT_WRCMD | HALF_RATE |
DRVSTR_PFET(0xe) | DRVSTR_NFET(0xe) |
RCVR_EN | PREAMBLE_DLY(2);
writel(pad_ctl, &ddr2_phy->pad_ctrl);
/* SCL_CONFIG_0 */
writel(SCL_BURST8 | SCL_DDR_CONNECTED | SCL_RCAS_LAT(RL) |
SCL_ODTCSWW, &ddr2_phy->scl_config_1);
/* SCL_CONFIG_1 */
writel(SCL_CSEN | SCL_WCAS_LAT(WL), &ddr2_phy->scl_config_2);
/* SCL_LAT */
writel(SCL_CAPCLKDLY(3) | SCL_DDRCLKDLY(4), &ddr2_phy->scl_latency);
}
/* start phy self calibration logic */
static int ddr2_phy_calib_start(void)
{
struct ddr2_phy_regs *ddr2_phy;
ddr2_phy = ioremap(PIC32_DDR2P_BASE, sizeof(*ddr2_phy));
/* DDR Phy SCL Start */
writel(SCL_START | SCL_EN, &ddr2_phy->scl_start);
/* Wait for SCL for data byte to pass */
return wait_for_bit_le32(&ddr2_phy->scl_start, SCL_LUBPASS,
true, CONFIG_SYS_HZ, false);
}
/* DDR2 Controller initialization */
/* Target Agent Arbiter */
static void ddr_set_arbiter(struct ddr2_ctrl_regs *ctrl,
const struct ddr2_arbiter_params *const param)
{
int i;
for (i = 0; i < NUM_AGENTS; i++) {
/* set min burst size */
writel(i * MIN_LIM_WIDTH, &ctrl->tsel);
writel(param->min_limit, &ctrl->minlim);
/* set request period (4 * req_period clocks) */
writel(i * RQST_PERIOD_WIDTH, &ctrl->tsel);
writel(param->req_period, &ctrl->reqprd);
/* set number of burst accepted */
writel(i * MIN_CMDACPT_WIDTH, &ctrl->tsel);
writel(param->min_cmd_acpt, &ctrl->mincmd);
}
}
const struct ddr2_arbiter_params *__weak board_get_ddr_arbiter_params(void)
{
/* default arbiter parameters */
static const struct ddr2_arbiter_params arb_params[] = {
{ .min_limit = 0x1f, .req_period = 0xff, .min_cmd_acpt = 0x04,},
{ .min_limit = 0x1f, .req_period = 0xff, .min_cmd_acpt = 0x10,},
{ .min_limit = 0x1f, .req_period = 0xff, .min_cmd_acpt = 0x10,},
{ .min_limit = 0x04, .req_period = 0xff, .min_cmd_acpt = 0x04,},
{ .min_limit = 0x04, .req_period = 0xff, .min_cmd_acpt = 0x04,},
};
return &arb_params[0];
}
static void host_load_cmd(struct ddr2_ctrl_regs *ctrl, u32 cmd_idx,
u32 hostcmd2, u32 hostcmd1, u32 delay)
{
u32 hc_delay;
hc_delay = max_t(u32, DIV_ROUND_UP(delay, T_CK), 2) - 2;
writel(hostcmd1, &ctrl->cmd10[cmd_idx]);
writel((hostcmd2 & 0x7ff) | (hc_delay << 11), &ctrl->cmd20[cmd_idx]);
}
/* init DDR2 Controller */
void ddr2_ctrl_init(void)
{
u32 wr2prech, rd2prech, wr2rd, wr2rd_cs;
u32 ras2ras, ras2cas, prech2ras, temp;
const struct ddr2_arbiter_params *arb_params;
struct ddr2_ctrl_regs *ctrl;
ctrl = ioremap(PIC32_DDR2C_BASE, sizeof(*ctrl));
/* PIC32 DDR2 controller always work in HALF_RATE */
writel(HALF_RATE_MODE, &ctrl->memwidth);
/* Set arbiter configuration per target */
arb_params = board_get_ddr_arbiter_params();
ddr_set_arbiter(ctrl, arb_params);
/* Address Configuration, model {CS, ROW, BA, COL} */
writel((ROW_ADDR_RSHIFT | (BA_RSHFT << 8) | (CS_ADDR_RSHIFT << 16) |
(COL_HI_RSHFT << 24) | (SB_PRI << 29) |
(EN_AUTO_PRECH << 30)), &ctrl->memcfg0);
writel(ROW_ADDR_MASK, &ctrl->memcfg1);
writel(COL_HI_MASK, &ctrl->memcfg2);
writel(COL_LO_MASK, &ctrl->memcfg3);
writel(BA_MASK | (CS_ADDR_MASK << 8), &ctrl->memcfg4);
/* Refresh Config */
writel(REFCNT_CLK(DIV_ROUND_UP(T_RFI, T_CK_CTRL) - 2) |
REFDLY_CLK(DIV_ROUND_UP(T_RFC_MIN, T_CK_CTRL) - 2) |
MAX_PEND_REF(7),
&ctrl->refcfg);
/* Power Config */
writel(ECC_EN(0) | ERR_CORR_EN(0) | EN_AUTO_PWR_DN(0) |
EN_AUTO_SELF_REF(3) | PWR_DN_DLY(8) |
SELF_REF_DLY(17) | PRECH_PWR_DN_ONLY(0),
&ctrl->pwrcfg);
/* Delay Config */
wr2rd = max_t(u32, DIV_ROUND_UP(T_WTR, T_CK_CTRL),
DIV_ROUND_UP(T_WTR_TCK, 2)) + WL + BL;
wr2rd_cs = max_t(u32, wr2rd - 1, 3);
wr2prech = DIV_ROUND_UP(T_WR, T_CK_CTRL) + WL + BL;
rd2prech = max_t(u32, DIV_ROUND_UP(T_RTP, T_CK_CTRL),
DIV_ROUND_UP(T_RTP_TCK, 2)) + BL - 2;
ras2ras = max_t(u32, DIV_ROUND_UP(T_RRD, T_CK_CTRL),
DIV_ROUND_UP(T_RRD_TCK, 2)) - 1;
ras2cas = DIV_ROUND_UP(T_RCD, T_CK_CTRL) - 1;
prech2ras = DIV_ROUND_UP(T_RP, T_CK_CTRL) - 1;
writel(((wr2rd & 0x0f) |
((wr2rd_cs & 0x0f) << 4) |
((BL - 1) << 8) |
(BL << 12) |
((BL - 1) << 16) |
((BL - 1) << 20) |
((BL + 2) << 24) |
((RL - WL + 3) << 28)), &ctrl->dlycfg0);
writel(((T_CKE_TCK - 1) |
(((DIV_ROUND_UP(T_DLLK, 2) - 2) & 0xff) << 8) |
((T_CKE_TCK - 1) << 16) |
((max_t(u32, T_XP_TCK, T_CKE_TCK) - 1) << 20) |
((wr2prech >> 4) << 26) |
((wr2rd >> 4) << 27) |
((wr2rd_cs >> 4) << 28) |
(((RL + 5) >> 4) << 29) |
((DIV_ROUND_UP(T_DLLK, 2) >> 8) << 30)), &ctrl->dlycfg1);
writel((DIV_ROUND_UP(T_RP, T_CK_CTRL) |
(rd2prech << 8) |
((wr2prech & 0x0f) << 12) |
(ras2ras << 16) |
(ras2cas << 20) |
(prech2ras << 24) |
((RL + 3) << 28)), &ctrl->dlycfg2);
writel(((DIV_ROUND_UP(T_RAS_MIN, T_CK_CTRL) - 1) |
((DIV_ROUND_UP(T_RC, T_CK_CTRL) - 1) << 8) |
((DIV_ROUND_UP(T_FAW, T_CK_CTRL) - 1) << 16)),
&ctrl->dlycfg3);
/* ODT Config */
writel(0x0, &ctrl->odtcfg);
writel(BIT(16), &ctrl->odtencfg);
writel(ODTRDLY(RL - 3) | ODTWDLY(WL - 3) | ODTRLEN(2) | ODTWLEN(3),
&ctrl->odtcfg);
/* Transfer Configuration */
writel(NXTDATRQDLY(2) | NXDATAVDLY(4) | RDATENDLY(2) |
MAX_BURST(3) | (7 << 28) | BIG_ENDIAN(0),
&ctrl->xfercfg);
/* DRAM Initialization */
/* CKE high after reset and wait 400 nsec */
host_load_cmd(ctrl, 0, 0, IDLE_NOP, 400000);
/* issue precharge all command */
host_load_cmd(ctrl, 1, 0x04, PRECH_ALL_CMD, T_RP + T_CK);
/* initialize EMR2 */
host_load_cmd(ctrl, 2, 0x200, LOAD_MODE_CMD, T_MRD_TCK * T_CK);
/* initialize EMR3 */
host_load_cmd(ctrl, 3, 0x300, LOAD_MODE_CMD, T_MRD_TCK * T_CK);
/*
* RDQS disable, DQSB enable, OCD exit, 150 ohm termination,
* AL=0, DLL enable
*/
host_load_cmd(ctrl, 4, 0x100,
LOAD_MODE_CMD | (0x40 << 24), T_MRD_TCK * T_CK);
/*
* PD fast exit, WR REC = T_WR in clocks -1,
* DLL reset, CAS = RL, burst = 4
*/
temp = ((DIV_ROUND_UP(T_WR, T_CK) - 1) << 1) | 1;
host_load_cmd(ctrl, 5, temp, LOAD_MODE_CMD | (RL << 28) | (2 << 24),
T_MRD_TCK * T_CK);
/* issue precharge all command */
host_load_cmd(ctrl, 6, 4, PRECH_ALL_CMD, T_RP + T_CK);
/* issue refresh command */
host_load_cmd(ctrl, 7, 0, REF_CMD, T_RFC_MIN);
/* issue refresh command */
host_load_cmd(ctrl, 8, 0, REF_CMD, T_RFC_MIN);
/* Mode register programming as before without DLL reset */
host_load_cmd(ctrl, 9, temp, LOAD_MODE_CMD | (RL << 28) | (3 << 24),
T_MRD_TCK * T_CK);
/* extended mode register same as before with OCD default */
host_load_cmd(ctrl, 10, 0x103, LOAD_MODE_CMD | (0xc << 24),
T_MRD_TCK * T_CK);
/* extended mode register same as before with OCD exit */
host_load_cmd(ctrl, 11, 0x100, LOAD_MODE_CMD | (0x4 << 28),
140 * T_CK);
writel(CMD_VALID | NUMHOSTCMD(11), &ctrl->cmdissue);
/* start memory initialization */
writel(INIT_START, &ctrl->memcon);
/* wait for all host cmds to be transmitted */
wait_for_bit_le32(&ctrl->cmdissue, CMD_VALID, false,
CONFIG_SYS_HZ, false);
/* inform all cmds issued, ready for normal operation */
writel(INIT_START | INIT_DONE, &ctrl->memcon);
/* perform phy caliberation */
if (ddr2_phy_calib_start())
printf("ddr2: phy calib failed\n");
}
phys_size_t ddr2_calculate_size(void)
{
u32 temp;
temp = 1 << (COL_BITS + BA_BITS + ROW_BITS);
/* 16-bit data width between controller and DIMM */
temp = temp * CS_BITS * (16 / 8);
return (phys_size_t)temp;
}
|