1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
|
// SPDX-License-Identifier: GPL-2.0+
/*
* PLDA XpressRich PCIe host controller common functions.
*
* Copyright (C) 2023 StarFive Technology Co., Ltd.
*
*/
#include <common.h>
#include <clk.h>
#include <dm.h>
#include <pci.h>
#include <pci_ids.h>
#include <asm/global_data.h>
#include <asm/io.h>
#include <dm/device_compat.h>
#include <linux/delay.h>
#include <linux/iopoll.h>
#include "pcie_plda_common.h"
static bool plda_pcie_addr_valid(struct pcie_plda *plda, pci_dev_t bdf)
{
/*
* Single device limitation.
* PCIe controller contain HW issue that secondary bus of
* host bridge emumerate duplicate devices.
* Only can access device 0 in secondary bus.
*/
if (PCI_BUS(bdf) == plda->sec_busno && PCI_DEV(bdf) > 0)
return false;
return true;
}
static int plda_pcie_conf_address(const struct udevice *udev, pci_dev_t bdf,
uint offset, void **paddr)
{
struct pcie_plda *priv = dev_get_priv(udev);
int where = PCIE_ECAM_OFFSET(PCI_BUS(bdf) - dev_seq(udev),
PCI_DEV(bdf), PCI_FUNC(bdf), offset);
if (!plda_pcie_addr_valid(priv, bdf))
return -ENODEV;
*paddr = (void *)(priv->cfg_base + where);
return 0;
}
int plda_pcie_config_read(const struct udevice *udev, pci_dev_t bdf,
uint offset, ulong *valuep,
enum pci_size_t size)
{
return pci_generic_mmap_read_config(udev, plda_pcie_conf_address,
bdf, offset, valuep, size);
}
int plda_pcie_config_write(struct udevice *udev, pci_dev_t bdf,
uint offset, ulong value,
enum pci_size_t size)
{
struct pcie_plda *priv = dev_get_priv(udev);
int ret;
ret = pci_generic_mmap_write_config(udev, plda_pcie_conf_address,
bdf, offset, value, size);
/* record secondary bus number */
if (!ret && PCI_BUS(bdf) == dev_seq(udev) &&
PCI_DEV(bdf) == 0 && PCI_FUNC(bdf) == 0 &&
(offset == PCI_SECONDARY_BUS ||
(offset == PCI_PRIMARY_BUS && size != PCI_SIZE_8))) {
priv->sec_busno =
((offset == PCI_PRIMARY_BUS) ? (value >> 8) : value) & 0xff;
priv->sec_busno += dev_seq(udev);
debug("Secondary bus number was changed to %d\n",
priv->sec_busno);
}
return ret;
}
int plda_pcie_set_atr_entry(struct pcie_plda *plda, phys_addr_t src_addr,
phys_addr_t trsl_addr, phys_size_t window_size,
int trsl_param)
{
void __iomem *base =
plda->reg_base + XR3PCI_ATR_AXI4_SLV0;
/* Support AXI4 Slave 0 Address Translation Tables 0-7. */
if (plda->atr_table_num >= XR3PCI_ATR_MAX_TABLE_NUM) {
dev_err(plda->dev, "ATR table number %d exceeds max num\n",
plda->atr_table_num);
return -EINVAL;
}
base += XR3PCI_ATR_TABLE_OFFSET * plda->atr_table_num;
plda->atr_table_num++;
/*
* X3PCI_ATR_SRC_ADDR_LOW:
* - bit 0: enable entry,
* - bits 1-6: ATR window size: total size in bytes: 2^(ATR_WSIZE + 1)
* - bits 7-11: reserved
* - bits 12-31: start of source address
*/
writel((lower_32_bits(src_addr) & XR3PCI_ATR_SRC_ADDR_MASK) |
(fls(window_size) - 1) << XR3PCI_ATR_SRC_WIN_SIZE_SHIFT | 1,
base + XR3PCI_ATR_SRC_ADDR_LOW);
writel(upper_32_bits(src_addr), base + XR3PCI_ATR_SRC_ADDR_HIGH);
writel((lower_32_bits(trsl_addr) & XR3PCI_ATR_TRSL_ADDR_MASK),
base + XR3PCI_ATR_TRSL_ADDR_LOW);
writel(upper_32_bits(trsl_addr), base + XR3PCI_ATR_TRSL_ADDR_HIGH);
writel(trsl_param, base + XR3PCI_ATR_TRSL_PARAM);
dev_dbg(plda->dev, "ATR entry: 0x%010llx %s 0x%010llx [0x%010llx] (param: 0x%06x)\n",
src_addr, (trsl_param & XR3PCI_ATR_TRSL_DIR) ? "<-" : "->",
trsl_addr, (u64)window_size, trsl_param);
return 0;
}
|