1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
|
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2012-2015 Panasonic Corporation
* Copyright (C) 2015-2016 Socionext Inc.
* Author: Masahiro Yamada <yamada.masahiro@socionext.com>
*/
#include <common.h>
#include <dm.h>
#include <linux/bitfield.h>
#include <linux/bitops.h>
#include <linux/bug.h>
#include <linux/io.h>
#include <linux/serial_reg.h>
#include <linux/sizes.h>
#include <linux/errno.h>
#include <serial.h>
#include <fdtdec.h>
#define UNIPHIER_UART_REGSHIFT 2
#define UNIPHIER_UART_RX (0 << (UNIPHIER_UART_REGSHIFT))
#define UNIPHIER_UART_TX UNIPHIER_UART_RX
/* bit[15:8] = CHAR, bit[7:0] = FCR */
#define UNIPHIER_UART_CHAR_FCR (3 << (UNIPHIER_UART_REGSHIFT))
#define UNIPHIER_UART_FCR_MASK GENMASK(7, 0)
/* bit[15:8] = LCR, bit[7:0] = MCR */
#define UNIPHIER_UART_LCR_MCR (4 << (UNIPHIER_UART_REGSHIFT))
#define UNIPHIER_UART_LCR_MASK GENMASK(15, 8)
#define UNIPHIER_UART_LSR (5 << (UNIPHIER_UART_REGSHIFT))
/* Divisor Latch Register */
#define UNIPHIER_UART_DLR (9 << (UNIPHIER_UART_REGSHIFT))
struct uniphier_serial_priv {
void __iomem *membase;
unsigned int uartclk;
};
static int uniphier_serial_setbrg(struct udevice *dev, int baudrate)
{
struct uniphier_serial_priv *priv = dev_get_priv(dev);
static const unsigned int mode_x_div = 16;
unsigned int divisor;
divisor = DIV_ROUND_CLOSEST(priv->uartclk, mode_x_div * baudrate);
/* flush the trasmitter before changing hw setting */
while (!(readl(priv->membase + UNIPHIER_UART_LSR) & UART_LSR_TEMT))
;
writel(divisor, priv->membase + UNIPHIER_UART_DLR);
return 0;
}
static int uniphier_serial_getc(struct udevice *dev)
{
struct uniphier_serial_priv *priv = dev_get_priv(dev);
if (!(readl(priv->membase + UNIPHIER_UART_LSR) & UART_LSR_DR))
return -EAGAIN;
return readl(priv->membase + UNIPHIER_UART_RX);
}
static int uniphier_serial_putc(struct udevice *dev, const char c)
{
struct uniphier_serial_priv *priv = dev_get_priv(dev);
if (!(readl(priv->membase + UNIPHIER_UART_LSR) & UART_LSR_THRE))
return -EAGAIN;
writel(c, priv->membase + UNIPHIER_UART_TX);
return 0;
}
static int uniphier_serial_pending(struct udevice *dev, bool input)
{
struct uniphier_serial_priv *priv = dev_get_priv(dev);
if (input)
return readl(priv->membase + UNIPHIER_UART_LSR) & UART_LSR_DR;
else
return !(readl(priv->membase + UNIPHIER_UART_LSR) & UART_LSR_THRE);
}
/*
* SPL does not have enough memory footprint for the clock driver.
* Hardcode clock frequency for each SoC.
*/
struct uniphier_serial_clk_data {
const char *compatible;
unsigned int clk_rate;
};
static const struct uniphier_serial_clk_data uniphier_serial_clk_data[] = {
{ .compatible = "socionext,uniphier-ld4", .clk_rate = 36864000 },
{ .compatible = "socionext,uniphier-pro4", .clk_rate = 73728000 },
{ .compatible = "socionext,uniphier-sld8", .clk_rate = 80000000 },
{ .compatible = "socionext,uniphier-pro5", .clk_rate = 73728000 },
{ .compatible = "socionext,uniphier-pxs2", .clk_rate = 88888888 },
{ .compatible = "socionext,uniphier-ld6b", .clk_rate = 88888888 },
{ .compatible = "socionext,uniphier-ld11", .clk_rate = 58823529 },
{ .compatible = "socionext,uniphier-ld20", .clk_rate = 58823529 },
{ .compatible = "socionext,uniphier-pxs3", .clk_rate = 58823529 },
{ /* sentinel */ },
};
static int uniphier_serial_probe(struct udevice *dev)
{
struct uniphier_serial_priv *priv = dev_get_priv(dev);
const struct uniphier_serial_clk_data *clk_data;
ofnode root_node;
fdt_addr_t base;
u32 tmp;
base = dev_read_addr(dev);
if (base == FDT_ADDR_T_NONE)
return -EINVAL;
priv->membase = devm_ioremap(dev, base, SZ_64);
if (!priv->membase)
return -ENOMEM;
root_node = ofnode_path("/");
clk_data = uniphier_serial_clk_data;
while (clk_data->compatible) {
if (ofnode_device_is_compatible(root_node,
clk_data->compatible))
break;
clk_data++;
}
if (WARN_ON(!clk_data->compatible))
return -ENOTSUPP;
priv->uartclk = clk_data->clk_rate;
/* flush the trasmitter before changing hw setting */
while (!(readl(priv->membase + UNIPHIER_UART_LSR) & UART_LSR_TEMT))
;
/* enable FIFO */
tmp = readl(priv->membase + UNIPHIER_UART_CHAR_FCR);
tmp &= ~UNIPHIER_UART_FCR_MASK;
tmp |= FIELD_PREP(UNIPHIER_UART_FCR_MASK, UART_FCR_ENABLE_FIFO);
writel(tmp, priv->membase + UNIPHIER_UART_CHAR_FCR);
tmp = readl(priv->membase + UNIPHIER_UART_LCR_MCR);
tmp &= ~UNIPHIER_UART_LCR_MASK;
tmp |= FIELD_PREP(UNIPHIER_UART_LCR_MASK, UART_LCR_WLEN8);
writel(tmp, priv->membase + UNIPHIER_UART_LCR_MCR);
return 0;
}
static const struct udevice_id uniphier_uart_of_match[] = {
{ .compatible = "socionext,uniphier-uart" },
{ /* sentinel */ }
};
static const struct dm_serial_ops uniphier_serial_ops = {
.setbrg = uniphier_serial_setbrg,
.getc = uniphier_serial_getc,
.putc = uniphier_serial_putc,
.pending = uniphier_serial_pending,
};
U_BOOT_DRIVER(uniphier_serial) = {
.name = "uniphier-uart",
.id = UCLASS_SERIAL,
.of_match = uniphier_uart_of_match,
.probe = uniphier_serial_probe,
.priv_auto = sizeof(struct uniphier_serial_priv),
.ops = &uniphier_serial_ops,
};
|