1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
|
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2017, Fuzhou Rockchip Electronics Co., Ltd
* Author: Eric Gao <eric.gao@rock-chips.com>
*/
#include <common.h>
#include <clk.h>
#include <display.h>
#include <dm.h>
#include <log.h>
#include <panel.h>
#include <regmap.h>
#include "rk_mipi.h"
#include <syscon.h>
#include <asm/gpio.h>
#include <asm/io.h>
#include <dm/uclass-internal.h>
#include <linux/err.h>
#include <linux/kernel.h>
#include <asm/arch-rockchip/clock.h>
#include <asm/arch-rockchip/cru.h>
#include <asm/arch-rockchip/grf_rk3288.h>
#include <asm/arch-rockchip/hardware.h>
#include <asm/arch-rockchip/rockchip_mipi_dsi.h>
#define MHz 1000000
/* Select mipi dsi source, big or little vop */
static int rk_mipi_dsi_source_select(struct udevice *dev)
{
struct rk_mipi_priv *priv = dev_get_priv(dev);
struct rk3288_grf *grf = priv->grf;
struct display_plat *disp_uc_plat = dev_get_uclass_plat(dev);
/* Select the video source */
switch (disp_uc_plat->source_id) {
case VOP_B:
rk_clrsetreg(&grf->soc_con6, RK3288_DSI0_LCDC_SEL_MASK,
RK3288_DSI0_LCDC_SEL_BIG
<< RK3288_DSI0_LCDC_SEL_SHIFT);
break;
case VOP_L:
rk_clrsetreg(&grf->soc_con6, RK3288_DSI0_LCDC_SEL_MASK,
RK3288_DSI0_LCDC_SEL_LIT
<< RK3288_DSI0_LCDC_SEL_SHIFT);
break;
default:
debug("%s: Invalid VOP id\n", __func__);
return -EINVAL;
}
return 0;
}
/* Setup mipi dphy working mode */
static void rk_mipi_dphy_mode_set(struct udevice *dev)
{
struct rk_mipi_priv *priv = dev_get_priv(dev);
struct rk3288_grf *grf = priv->grf;
int val;
/* Set Controller as TX mode */
val = RK3288_DPHY_TX0_RXMODE_DIS << RK3288_DPHY_TX0_RXMODE_SHIFT;
rk_clrsetreg(&grf->soc_con8, RK3288_DPHY_TX0_RXMODE_MASK, val);
/* Exit tx stop mode */
val |= RK3288_DPHY_TX0_TXSTOPMODE_EN
<< RK3288_DPHY_TX0_TXSTOPMODE_SHIFT;
rk_clrsetreg(&grf->soc_con8,
RK3288_DPHY_TX0_TXSTOPMODE_MASK, val);
/* Disable turnequest */
val |= RK3288_DPHY_TX0_TURNREQUEST_EN
<< RK3288_DPHY_TX0_TURNREQUEST_SHIFT;
rk_clrsetreg(&grf->soc_con8,
RK3288_DPHY_TX0_TURNREQUEST_MASK, val);
}
/*
* This function is called by rk_display_init() using rk_mipi_dsi_enable() and
* rk_mipi_phy_enable() to initialize mipi controller and dphy. If success,
* enable backlight.
*/
static int rk_mipi_enable(struct udevice *dev, int panel_bpp,
const struct display_timing *timing)
{
int ret;
struct rk_mipi_priv *priv = dev_get_priv(dev);
/* Fill the mipi controller parameter */
priv->ref_clk = 24 * MHz;
priv->sys_clk = priv->ref_clk;
priv->pix_clk = timing->pixelclock.typ;
priv->phy_clk = priv->pix_clk * 6;
priv->txbyte_clk = priv->phy_clk / 8;
priv->txesc_clk = 20 * MHz;
/* Select vop port, big or little */
rk_mipi_dsi_source_select(dev);
/* Set mipi dphy work mode */
rk_mipi_dphy_mode_set(dev);
/* Config and enable mipi dsi according to timing */
ret = rk_mipi_dsi_enable(dev, timing);
if (ret) {
debug("%s: rk_mipi_dsi_enable() failed (err=%d)\n",
__func__, ret);
return ret;
}
/* Config and enable mipi phy */
ret = rk_mipi_phy_enable(dev);
if (ret) {
debug("%s: rk_mipi_phy_enable() failed (err=%d)\n",
__func__, ret);
return ret;
}
/* Enable backlight */
ret = panel_enable_backlight(priv->panel);
if (ret) {
debug("%s: panel_enable_backlight() failed (err=%d)\n",
__func__, ret);
return ret;
}
return 0;
}
static int rk_mipi_of_to_plat(struct udevice *dev)
{
struct rk_mipi_priv *priv = dev_get_priv(dev);
priv->grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
if (IS_ERR_OR_NULL(priv->grf)) {
debug("%s: Get syscon grf failed (ret=%p)\n",
__func__, priv->grf);
return -ENXIO;
}
priv->regs = dev_read_addr(dev);
if (priv->regs == FDT_ADDR_T_NONE) {
debug("%s: Get MIPI dsi address failed (ret=%lu)\n", __func__,
priv->regs);
return -ENXIO;
}
return 0;
}
/*
* Probe function: check panel existence and readingit's timing. Then config
* mipi dsi controller and enable it according to the timing parameter.
*/
static int rk_mipi_probe(struct udevice *dev)
{
int ret;
struct rk_mipi_priv *priv = dev_get_priv(dev);
ret = uclass_get_device_by_phandle(UCLASS_PANEL, dev, "rockchip,panel",
&priv->panel);
if (ret) {
debug("%s: Can not find panel (err=%d)\n", __func__, ret);
return ret;
}
return 0;
}
static const struct dm_display_ops rk_mipi_dsi_ops = {
.read_timing = rk_mipi_read_timing,
.enable = rk_mipi_enable,
};
static const struct udevice_id rk_mipi_dsi_ids[] = {
{ .compatible = "rockchip,rk3288-mipi-dsi" },
{ .compatible = "rockchip,rk3288_mipi_dsi" },
{ }
};
U_BOOT_DRIVER(rk_mipi_dsi) = {
.name = "rk_mipi_dsi",
.id = UCLASS_DISPLAY,
.of_match = rk_mipi_dsi_ids,
.of_to_plat = rk_mipi_of_to_plat,
.probe = rk_mipi_probe,
.ops = &rk_mipi_dsi_ops,
.priv_auto = sizeof(struct rk_mipi_priv),
};
|