1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
|
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2014 Soeren Moch <smoch@web.de>
*
* Configuration settings for the TBS2910 MatrixARM board.
*/
#ifndef __TBS2910_CONFIG_H
#define __TBS2910_CONFIG_H
#include "mx6_common.h"
/* General configuration */
/* Physical Memory Map */
#define CFG_SYS_SDRAM_BASE MMDC0_ARB_BASE_ADDR
#define CFG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
#define CFG_SYS_INIT_RAM_SIZE IRAM_SIZE
#define CFG_SYS_BOOTMAPSZ 0x10000000
/* PCI */
#ifdef CONFIG_CMD_PCI
#define CFG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(7, 12)
#endif
/* USB */
#ifdef CONFIG_CMD_USB
#define CFG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
#endif /* CONFIG_CMD_USB */
#define CFG_EXTRA_ENV_SETTINGS \
BOOTENV \
"bootargs_mmc1=console=ttymxc0,115200 di0_primary console=tty1\0" \
"bootargs_mmc2=video=mxcfb0:dev=hdmi,1920x1080M@60 " \
"video=mxcfb1:off video=mxcfb2:off fbmem=28M\0" \
"bootargs_mmc3=root=/dev/mmcblk0p1 rootwait consoleblank=0 quiet\0" \
"bootargs_mmc=setenv bootargs ${bootargs_mmc1} ${bootargs_mmc2} " \
"${bootargs_mmc3}\0" \
"bootargs_upd=setenv bootargs console=ttymxc0,115200 " \
"rdinit=/sbin/init enable_wait_mode=off\0" \
"bootcmd_mmc=run bootargs_mmc; mmc dev 2; " \
"mmc read 0x10800000 0x800 0x4000; bootm 0x10800000\0" \
"bootcmd_up1=load mmc 1 0x10800000 uImage\0" \
"bootcmd_up2=load mmc 1 0x10d00000 uramdisk.img; " \
"run bootargs_upd; " \
"bootm 0x10800000 0x10d00000\0" \
"console=ttymxc0\0" \
"fan=gpio set 92\0" \
"fdt_addr_r=0x18000000\0" \
"fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
"kernel_addr_r=0x12000000\0" \
"pxefile_addr_r=0x10100000\0" \
"ramdisk_addr_r=0x18080000\0" \
"scriptaddr=0x10000000\0" \
"stderr=serial,vidconsole\0" \
"stdin=serial,usbkbd\0" \
"stdout=serial,vidconsole\0"
/* Enable distro boot */
#define BOOT_TARGET_DEVICES(func) \
func(MMC, mmc, 0) \
func(MMC, mmc, 1) \
func(MMC, mmc, 2) \
func(SATA, sata, 0) \
func(USB, usb, 0)
#include <config_distro_bootcmd.h>
#endif /* __TBS2910_CONFIG_H * */
|