Push old Amlogic BL2 sourcesHEADmaster

3 files changed, 483 insertions, 0 deletions

diff --git a/drivers/arm/gic/aarch64/gic_v3_sysregs.S b/drivers/arm/gic/aarch64/gic_v3_sysregs.S
new file mode 100644
index 0000000..ddf85a8
--- /dev/null
+++ b/drivers/arm/gic/aarch64/gic_v3_sysregs.S
@@ -0,0 +1,85 @@
+/*
+ * Copyright (c) 2013-2014, ARM Limited and Contributors. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * Neither the name of ARM nor the names of its contributors may be used
+ * to endorse or promote products derived from this software without specific
+ * prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <asm_macros.S>
+
+	.globl	read_icc_sre_el1
+	.globl	read_icc_sre_el2
+	.globl	read_icc_sre_el3
+	.globl	write_icc_sre_el1
+	.globl	write_icc_sre_el2
+	.globl	write_icc_sre_el3
+	.globl  write_icc_pmr_el1
+
+
+/*
+ * Register definitions used by GCC for GICv3 access.
+ * These are defined by ARMCC, so keep them in the GCC specific code for now.
+ */
+#define ICC_SRE_EL1     S3_0_C12_C12_5
+#define ICC_SRE_EL2     S3_4_C12_C9_5
+#define ICC_SRE_EL3     S3_6_C12_C12_5
+#define ICC_CTLR_EL1    S3_0_C12_C12_4
+#define ICC_CTLR_EL3    S3_6_C12_C12_4
+#define ICC_PMR_EL1     S3_0_C4_C6_0
+
+func read_icc_sre_el1
+	mrs	x0, ICC_SRE_EL1
+	ret
+
+
+func read_icc_sre_el2
+	mrs	x0, ICC_SRE_EL2
+	ret
+
+
+func read_icc_sre_el3
+	mrs	x0, ICC_SRE_EL3
+	ret
+
+
+func write_icc_sre_el1
+	msr	ICC_SRE_EL1, x0
+	ret
+
+
+func write_icc_sre_el2
+	msr	ICC_SRE_EL2, x0
+	ret
+
+
+func write_icc_sre_el3
+	msr	ICC_SRE_EL3, x0
+	ret
+
+
+func write_icc_pmr_el1
+	msr	ICC_PMR_EL1, x0
+	ret
diff --git a/drivers/arm/gic/gic_v2.c b/drivers/arm/gic/gic_v2.c
new file mode 100644
index 0000000..27a39b9
--- /dev/null
+++ b/drivers/arm/gic/gic_v2.c
@@ -0,0 +1,318 @@
+/*
+ * Copyright (c) 2013-2014, ARM Limited and Contributors. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * Neither the name of ARM nor the names of its contributors may be used
+ * to endorse or promote products derived from this software without specific
+ * prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <arch.h>
+#include <assert.h>
+#include <gic_v2.h>
+#include <interrupt_mgmt.h>
+#include <mmio.h>
+
+/*******************************************************************************
+ * GIC Distributor interface accessors for reading entire registers
+ ******************************************************************************/
+
+unsigned int gicd_read_igroupr(unsigned int base, unsigned int id)
+{
+	unsigned n = id >> IGROUPR_SHIFT;
+	return mmio_read_32(base + GICD_IGROUPR + (n << 2));
+}
+
+unsigned int gicd_read_isenabler(unsigned int base, unsigned int id)
+{
+	unsigned n = id >> ISENABLER_SHIFT;
+	return mmio_read_32(base + GICD_ISENABLER + (n << 2));
+}
+
+unsigned int gicd_read_icenabler(unsigned int base, unsigned int id)
+{
+	unsigned n = id >> ICENABLER_SHIFT;
+	return mmio_read_32(base + GICD_ICENABLER + (n << 2));
+}
+
+unsigned int gicd_read_ispendr(unsigned int base, unsigned int id)
+{
+	unsigned n = id >> ISPENDR_SHIFT;
+	return mmio_read_32(base + GICD_ISPENDR + (n << 2));
+}
+
+unsigned int gicd_read_icpendr(unsigned int base, unsigned int id)
+{
+	unsigned n = id >> ICPENDR_SHIFT;
+	return mmio_read_32(base + GICD_ICPENDR + (n << 2));
+}
+
+unsigned int gicd_read_isactiver(unsigned int base, unsigned int id)
+{
+	unsigned n = id >> ISACTIVER_SHIFT;
+	return mmio_read_32(base + GICD_ISACTIVER + (n << 2));
+}
+
+unsigned int gicd_read_icactiver(unsigned int base, unsigned int id)
+{
+	unsigned n = id >> ICACTIVER_SHIFT;
+	return mmio_read_32(base + GICD_ICACTIVER + (n << 2));
+}
+
+unsigned int gicd_read_ipriorityr(unsigned int base, unsigned int id)
+{
+	unsigned n = id >> IPRIORITYR_SHIFT;
+	return mmio_read_32(base + GICD_IPRIORITYR + (n << 2));
+}
+
+unsigned int gicd_read_itargetsr(unsigned int base, unsigned int id)
+{
+	unsigned n = id >> ITARGETSR_SHIFT;
+	return mmio_read_32(base + GICD_ITARGETSR + (n << 2));
+}
+
+unsigned int gicd_read_icfgr(unsigned int base, unsigned int id)
+{
+	unsigned n = id >> ICFGR_SHIFT;
+	return mmio_read_32(base + GICD_ICFGR + (n << 2));
+}
+
+unsigned int gicd_read_cpendsgir(unsigned int base, unsigned int id)
+{
+	unsigned n = id >> CPENDSGIR_SHIFT;
+	return mmio_read_32(base + GICD_CPENDSGIR + (n << 2));
+}
+
+unsigned int gicd_read_spendsgir(unsigned int base, unsigned int id)
+{
+	unsigned n = id >> SPENDSGIR_SHIFT;
+	return mmio_read_32(base + GICD_SPENDSGIR + (n << 2));
+}
+
+/*******************************************************************************
+ * GIC Distributor interface accessors for writing entire registers
+ ******************************************************************************/
+
+void gicd_write_igroupr(unsigned int base, unsigned int id, unsigned int val)
+{
+	unsigned n = id >> IGROUPR_SHIFT;
+	mmio_write_32(base + GICD_IGROUPR + (n << 2), val);
+}
+
+void gicd_write_isenabler(unsigned int base, unsigned int id, unsigned int val)
+{
+	unsigned n = id >> ISENABLER_SHIFT;
+	mmio_write_32(base + GICD_ISENABLER + (n << 2), val);
+}
+
+void gicd_write_icenabler(unsigned int base, unsigned int id, unsigned int val)
+{
+	unsigned n = id >> ICENABLER_SHIFT;
+	mmio_write_32(base + GICD_ICENABLER + (n << 2), val);
+}
+
+void gicd_write_ispendr(unsigned int base, unsigned int id, unsigned int val)
+{
+	unsigned n = id >> ISPENDR_SHIFT;
+	mmio_write_32(base + GICD_ISPENDR + (n << 2), val);
+}
+
+void gicd_write_icpendr(unsigned int base, unsigned int id, unsigned int val)
+{
+	unsigned n = id >> ICPENDR_SHIFT;
+	mmio_write_32(base + GICD_ICPENDR + (n << 2), val);
+}
+
+void gicd_write_isactiver(unsigned int base, unsigned int id, unsigned int val)
+{
+	unsigned n = id >> ISACTIVER_SHIFT;
+	mmio_write_32(base + GICD_ISACTIVER + (n << 2), val);
+}
+
+void gicd_write_icactiver(unsigned int base, unsigned int id, unsigned int val)
+{
+	unsigned n = id >> ICACTIVER_SHIFT;
+	mmio_write_32(base + GICD_ICACTIVER + (n << 2), val);
+}
+
+void gicd_write_ipriorityr(unsigned int base, unsigned int id, unsigned int val)
+{
+	unsigned n = id >> IPRIORITYR_SHIFT;
+	mmio_write_32(base + GICD_IPRIORITYR + (n << 2), val);
+}
+
+void gicd_write_itargetsr(unsigned int base, unsigned int id, unsigned int val)
+{
+	unsigned n = id >> ITARGETSR_SHIFT;
+	mmio_write_32(base + GICD_ITARGETSR + (n << 2), val);
+}
+
+void gicd_write_icfgr(unsigned int base, unsigned int id, unsigned int val)
+{
+	unsigned n = id >> ICFGR_SHIFT;
+	mmio_write_32(base + GICD_ICFGR + (n << 2), val);
+}
+
+void gicd_write_cpendsgir(unsigned int base, unsigned int id, unsigned int val)
+{
+	unsigned n = id >> CPENDSGIR_SHIFT;
+	mmio_write_32(base + GICD_CPENDSGIR + (n << 2), val);
+}
+
+void gicd_write_spendsgir(unsigned int base, unsigned int id, unsigned int val)
+{
+	unsigned n = id >> SPENDSGIR_SHIFT;
+	mmio_write_32(base + GICD_SPENDSGIR + (n << 2), val);
+}
+
+/*******************************************************************************
+ * GIC Distributor interface accessors for individual interrupt manipulation
+ ******************************************************************************/
+unsigned int gicd_get_igroupr(unsigned int base, unsigned int id)
+{
+	unsigned bit_num = id & ((1 << IGROUPR_SHIFT) - 1);
+	unsigned int reg_val = gicd_read_igroupr(base, id);
+
+	return (reg_val >> bit_num) & 0x1;
+}
+
+void gicd_set_igroupr(unsigned int base, unsigned int id)
+{
+	unsigned bit_num = id & ((1 << IGROUPR_SHIFT) - 1);
+	unsigned int reg_val = gicd_read_igroupr(base, id);
+
+	gicd_write_igroupr(base, id, reg_val | (1 << bit_num));
+}
+
+void gicd_clr_igroupr(unsigned int base, unsigned int id)
+{
+	unsigned bit_num = id & ((1 << IGROUPR_SHIFT) - 1);
+	unsigned int reg_val = gicd_read_igroupr(base, id);
+
+	gicd_write_igroupr(base, id, reg_val & ~(1 << bit_num));
+}
+
+void gicd_set_isenabler(unsigned int base, unsigned int id)
+{
+	unsigned bit_num = id & ((1 << ISENABLER_SHIFT) - 1);
+
+	gicd_write_isenabler(base, id, (1 << bit_num));
+}
+
+void gicd_set_icenabler(unsigned int base, unsigned int id)
+{
+	unsigned bit_num = id & ((1 << ICENABLER_SHIFT) - 1);
+
+	gicd_write_icenabler(base, id, (1 << bit_num));
+}
+
+void gicd_set_ispendr(unsigned int base, unsigned int id)
+{
+	unsigned bit_num = id & ((1 << ISPENDR_SHIFT) - 1);
+
+	gicd_write_ispendr(base, id, (1 << bit_num));
+}
+
+void gicd_set_icpendr(unsigned int base, unsigned int id)
+{
+	unsigned bit_num = id & ((1 << ICPENDR_SHIFT) - 1);
+
+	gicd_write_icpendr(base, id, (1 << bit_num));
+}
+
+void gicd_set_isactiver(unsigned int base, unsigned int id)
+{
+	unsigned bit_num = id & ((1 << ISACTIVER_SHIFT) - 1);
+
+	gicd_write_isactiver(base, id, (1 << bit_num));
+}
+
+void gicd_set_icactiver(unsigned int base, unsigned int id)
+{
+	unsigned bit_num = id & ((1 << ICACTIVER_SHIFT) - 1);
+
+	gicd_write_icactiver(base, id, (1 << bit_num));
+}
+
+/*
+ * Make sure that the interrupt's group is set before expecting
+ * this function to do its job correctly.
+ */
+void gicd_set_ipriorityr(unsigned int base, unsigned int id, unsigned int pri)
+{
+	unsigned int reg = base + GICD_IPRIORITYR + (id & ~3);
+	unsigned int shift = (id & 3) << 3;
+	unsigned int reg_val = mmio_read_32(reg);
+
+	/*
+	 * Enforce ARM recommendation to manage priority values such
+	 * that group1 interrupts always have a lower priority than
+	 * group0 interrupts.
+	 * Note, lower numerical values are higher priorities so the comparison
+	 * checks below are reversed from what might be expected.
+	 */
+	assert(gicd_get_igroupr(base, id) == GRP1 ?
+		pri >= GIC_HIGHEST_NS_PRIORITY &&
+			pri <= GIC_LOWEST_NS_PRIORITY :
+		pri >= GIC_HIGHEST_SEC_PRIORITY &&
+			pri <= GIC_LOWEST_SEC_PRIORITY);
+
+	reg_val &= ~(GIC_PRI_MASK << shift);
+	reg_val |= (pri & GIC_PRI_MASK) << shift;
+	mmio_write_32(reg, reg_val);
+}
+
+void gicd_set_itargetsr(unsigned int base, unsigned int id, unsigned int iface)
+{
+	unsigned byte_off = id & ((1 << ITARGETSR_SHIFT) - 1);
+	unsigned int reg_val = gicd_read_itargetsr(base, id);
+
+	gicd_write_itargetsr(base, id, reg_val |
+			     (1 << iface) << (byte_off << 3));
+}
+
+/*******************************************************************************
+ * This function allows the interrupt management framework to determine (through
+ * the platform) which interrupt line (IRQ/FIQ) to use for an interrupt type to
+ * route it to EL3. The interrupt line is represented as the bit position of the
+ * IRQ or FIQ bit in the SCR_EL3.
+ ******************************************************************************/
+uint32_t gicv2_interrupt_type_to_line(uint32_t cpuif_base, uint32_t type)
+{
+	uint32_t gicc_ctlr;
+
+	/* Non-secure interrupts are signalled on the IRQ line always */
+	if (type == INTR_TYPE_NS)
+		return __builtin_ctz(SCR_IRQ_BIT);
+
+	/*
+	 * Secure interrupts are signalled using the IRQ line if the FIQ_EN
+	 * bit is not set else they are signalled using the FIQ line.
+	 */
+	gicc_ctlr = gicc_read_ctlr(cpuif_base);
+	if (gicc_ctlr & FIQ_EN)
+		return __builtin_ctz(SCR_FIQ_BIT);
+	else
+		return __builtin_ctz(SCR_IRQ_BIT);
+}
diff --git a/drivers/arm/gic/gic_v3.c b/drivers/arm/gic/gic_v3.c
new file mode 100644
index 0000000..f429662
--- /dev/null
+++ b/drivers/arm/gic/gic_v3.c
@@ -0,0 +1,80 @@
+/*
+ * Copyright (c) 2014, ARM Limited and Contributors. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * Neither the name of ARM nor the names of its contributors may be used
+ * to endorse or promote products derived from this software without specific
+ * prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <arch.h>
+#include <debug.h>
+#include <gic_v3.h>
+
+uintptr_t gicv3_get_rdist(uintptr_t gicr_base, uint64_t mpidr)
+{
+	uint32_t  cpu_aff, gicr_aff;
+	uint64_t  gicr_typer;
+	uintptr_t addr;
+
+	/* Construct the affinity as used by GICv3. MPIDR and GIC affinity level
+	 * mask is the same.
+	 */
+	cpu_aff  = ((mpidr >> MPIDR_AFF0_SHIFT) & MPIDR_AFFLVL_MASK) <<
+			GICV3_AFF0_SHIFT;
+	cpu_aff |= ((mpidr >> MPIDR_AFF1_SHIFT) & MPIDR_AFFLVL_MASK) <<
+			GICV3_AFF1_SHIFT;
+	cpu_aff |= ((mpidr >> MPIDR_AFF2_SHIFT) & MPIDR_AFFLVL_MASK) <<
+			GICV3_AFF2_SHIFT;
+	cpu_aff |= ((mpidr >> MPIDR_AFF3_SHIFT) & MPIDR_AFFLVL_MASK) <<
+			GICV3_AFF3_SHIFT;
+
+	addr = gicr_base;
+	do {
+		gicr_typer = gicr_read_typer(addr);
+
+		gicr_aff = (gicr_typer >> GICR_TYPER_AFF_SHIFT) &
+				GICR_TYPER_AFF_MASK;
+		if (cpu_aff == gicr_aff) {
+			/* Disable this print for now as it appears every time
+			 * when using PSCI CPU_SUSPEND.
+			 * TODO: Print this only the first time for each CPU.
+			 * INFO("GICv3 - Found RDIST for MPIDR(0x%lx) at 0x%lx\n",
+			 *	mpidr, addr);
+			 */
+			return addr;
+		}
+
+		/* TODO:
+		 * For GICv4 we need to adjust the Base address based on
+		 * GICR_TYPER.VLPIS
+		 */
+		addr += (1 << GICR_PCPUBASE_SHIFT);
+
+	} while (!(gicr_typer & GICR_TYPER_LAST));
+
+	/* If we get here we did not find a match. */
+	ERROR("GICv3 - Did not find RDIST for CPU with MPIDR 0x%lx\n", mpidr);
+	return (uintptr_t)NULL;
+}